dl2k: use standard #defines from mii.h.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
index 3fa9140..b2dc2c8 100644
--- a/drivers/net/ethernet/dlink/dl2k.c
+++ b/drivers/net/ethernet/dlink/dl2k.c
@@ -1428,7 +1428,7 @@
do {
bmsr = mii_read (dev, phy_addr, MII_BMSR);
- if (bmsr & MII_BMSR_LINK_STATUS)
+ if (bmsr & BMSR_LSTATUS)
return 0;
mdelay (1);
} while (--wait > 0);
@@ -1449,60 +1449,60 @@
bmsr = mii_read (dev, phy_addr, MII_BMSR);
if (np->an_enable) {
- if (!(bmsr & MII_BMSR_AN_COMPLETE)) {
+ if (!(bmsr & BMSR_ANEGCOMPLETE)) {
/* Auto-Negotiation not completed */
return -1;
}
- negotiate = mii_read (dev, phy_addr, MII_ANAR) &
- mii_read (dev, phy_addr, MII_ANLPAR);
- mscr = mii_read (dev, phy_addr, MII_MSCR);
- mssr = mii_read (dev, phy_addr, MII_MSSR);
- if (mscr & MII_MSCR_1000BT_FD && mssr & MII_MSSR_LP_1000BT_FD) {
+ negotiate = mii_read (dev, phy_addr, MII_ADVERTISE) &
+ mii_read (dev, phy_addr, MII_LPA);
+ mscr = mii_read (dev, phy_addr, MII_CTRL1000);
+ mssr = mii_read (dev, phy_addr, MII_STAT1000);
+ if (mscr & ADVERTISE_1000FULL && mssr & LPA_1000FULL) {
np->speed = 1000;
np->full_duplex = 1;
printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n");
- } else if (mscr & MII_MSCR_1000BT_HD && mssr & MII_MSSR_LP_1000BT_HD) {
+ } else if (mscr & ADVERTISE_1000HALF && mssr & LPA_1000HALF) {
np->speed = 1000;
np->full_duplex = 0;
printk (KERN_INFO "Auto 1000 Mbps, Half duplex\n");
- } else if (negotiate & MII_ANAR_100BX_FD) {
+ } else if (negotiate & ADVERTISE_100FULL) {
np->speed = 100;
np->full_duplex = 1;
printk (KERN_INFO "Auto 100 Mbps, Full duplex\n");
- } else if (negotiate & MII_ANAR_100BX_HD) {
+ } else if (negotiate & ADVERTISE_100HALF) {
np->speed = 100;
np->full_duplex = 0;
printk (KERN_INFO "Auto 100 Mbps, Half duplex\n");
- } else if (negotiate & MII_ANAR_10BT_FD) {
+ } else if (negotiate & ADVERTISE_10FULL) {
np->speed = 10;
np->full_duplex = 1;
printk (KERN_INFO "Auto 10 Mbps, Full duplex\n");
- } else if (negotiate & MII_ANAR_10BT_HD) {
+ } else if (negotiate & ADVERTISE_10HALF) {
np->speed = 10;
np->full_duplex = 0;
printk (KERN_INFO "Auto 10 Mbps, Half duplex\n");
}
- if (negotiate & MII_ANAR_PAUSE) {
+ if (negotiate & ADVERTISE_PAUSE_CAP) {
np->tx_flow &= 1;
np->rx_flow &= 1;
- } else if (negotiate & MII_ANAR_ASYMMETRIC) {
+ } else if (negotiate & ADVERTISE_PAUSE_ASYM) {
np->tx_flow = 0;
np->rx_flow &= 1;
}
/* else tx_flow, rx_flow = user select */
} else {
__u16 bmcr = mii_read (dev, phy_addr, MII_BMCR);
- switch (bmcr & (MII_BMCR_SPEED_100 | MII_BMCR_SPEED_1000)) {
- case MII_BMCR_SPEED_1000:
+ switch (bmcr & (BMCR_SPEED100 | BMCR_SPEED1000)) {
+ case BMCR_SPEED1000:
printk (KERN_INFO "Operating at 1000 Mbps, ");
break;
- case MII_BMCR_SPEED_100:
+ case BMCR_SPEED100:
printk (KERN_INFO "Operating at 100 Mbps, ");
break;
case 0:
printk (KERN_INFO "Operating at 10 Mbps, ");
}
- if (bmcr & MII_BMCR_DUPLEX_MODE) {
+ if (bmcr & BMCR_FULLDPLX) {
printk (KERN_CONT "Full duplex\n");
} else {
printk (KERN_CONT "Half duplex\n");
@@ -1536,24 +1536,22 @@
if (np->an_enable) {
/* Advertise capabilities */
bmsr = mii_read (dev, phy_addr, MII_BMSR);
- anar = mii_read (dev, phy_addr, MII_ANAR) &
- ~MII_ANAR_100BX_FD &
- ~MII_ANAR_100BX_HD &
- ~MII_ANAR_100BT4 &
- ~MII_ANAR_10BT_FD &
- ~MII_ANAR_10BT_HD;
- if (bmsr & MII_BMSR_100BX_FD)
- anar |= MII_ANAR_100BX_FD;
- if (bmsr & MII_BMSR_100BX_HD)
- anar |= MII_ANAR_100BX_HD;
- if (bmsr & MII_BMSR_100BT4)
- anar |= MII_ANAR_100BT4;
- if (bmsr & MII_BMSR_10BT_FD)
- anar |= MII_ANAR_10BT_FD;
- if (bmsr & MII_BMSR_10BT_HD)
- anar |= MII_ANAR_10BT_HD;
- anar |= MII_ANAR_PAUSE | MII_ANAR_ASYMMETRIC;
- mii_write (dev, phy_addr, MII_ANAR, anar);
+ anar = mii_read (dev, phy_addr, MII_ADVERTISE) &
+ ~(ADVERTISE_100FULL | ADVERTISE_10FULL |
+ ADVERTISE_100HALF | ADVERTISE_10HALF |
+ ADVERTISE_100BASE4);
+ if (bmsr & BMSR_100FULL)
+ anar |= ADVERTISE_100FULL;
+ if (bmsr & BMSR_100HALF)
+ anar |= ADVERTISE_100HALF;
+ if (bmsr & BMSR_100BASE4)
+ anar |= ADVERTISE_100BASE4;
+ if (bmsr & BMSR_10FULL)
+ anar |= ADVERTISE_10FULL;
+ if (bmsr & BMSR_10HALF)
+ anar |= ADVERTISE_10HALF;
+ anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+ mii_write (dev, phy_addr, MII_ADVERTISE, anar);
/* Enable Auto crossover */
pscr = mii_read (dev, phy_addr, MII_PHY_SCR);
@@ -1561,8 +1559,8 @@
mii_write (dev, phy_addr, MII_PHY_SCR, pscr);
/* Soft reset PHY */
- mii_write (dev, phy_addr, MII_BMCR, MII_BMCR_RESET);
- bmcr = MII_BMCR_AN_ENABLE | MII_BMCR_RESTART_AN | MII_BMCR_RESET;
+ mii_write (dev, phy_addr, MII_BMCR, BMCR_RESET);
+ bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET;
mii_write (dev, phy_addr, MII_BMCR, bmcr);
mdelay(1);
} else {
@@ -1574,7 +1572,7 @@
/* 2) PHY Reset */
bmcr = mii_read (dev, phy_addr, MII_BMCR);
- bmcr |= MII_BMCR_RESET;
+ bmcr |= BMCR_RESET;
mii_write (dev, phy_addr, MII_BMCR, bmcr);
/* 3) Power Down */
@@ -1583,25 +1581,25 @@
mdelay (100); /* wait a certain time */
/* 4) Advertise nothing */
- mii_write (dev, phy_addr, MII_ANAR, 0);
+ mii_write (dev, phy_addr, MII_ADVERTISE, 0);
/* 5) Set media and Power Up */
- bmcr = MII_BMCR_POWER_DOWN;
+ bmcr = BMCR_PDOWN;
if (np->speed == 100) {
- bmcr |= MII_BMCR_SPEED_100;
+ bmcr |= BMCR_SPEED100;
printk (KERN_INFO "Manual 100 Mbps, ");
} else if (np->speed == 10) {
printk (KERN_INFO "Manual 10 Mbps, ");
}
if (np->full_duplex) {
- bmcr |= MII_BMCR_DUPLEX_MODE;
+ bmcr |= BMCR_FULLDPLX;
printk (KERN_CONT "Full duplex\n");
} else {
printk (KERN_CONT "Half duplex\n");
}
#if 0
/* Set 1000BaseT Master/Slave setting */
- mscr = mii_read (dev, phy_addr, MII_MSCR);
+ mscr = mii_read (dev, phy_addr, MII_CTRL1000);
mscr |= MII_MSCR_CFG_ENABLE;
mscr &= ~MII_MSCR_CFG_VALUE = 0;
#endif
@@ -1624,7 +1622,7 @@
bmsr = mii_read (dev, phy_addr, PCS_BMSR);
if (np->an_enable) {
- if (!(bmsr & MII_BMSR_AN_COMPLETE)) {
+ if (!(bmsr & BMSR_ANEGCOMPLETE)) {
/* Auto-Negotiation not completed */
return -1;
}
@@ -1649,7 +1647,7 @@
} else {
__u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR);
printk (KERN_INFO "Operating at 1000 Mbps, ");
- if (bmcr & MII_BMCR_DUPLEX_MODE) {
+ if (bmcr & BMCR_FULLDPLX) {
printk (KERN_CONT "Full duplex\n");
} else {
printk (KERN_CONT "Half duplex\n");
@@ -1682,7 +1680,7 @@
if (np->an_enable) {
/* Advertise capabilities */
esr = mii_read (dev, phy_addr, PCS_ESR);
- anar = mii_read (dev, phy_addr, MII_ANAR) &
+ anar = mii_read (dev, phy_addr, MII_ADVERTISE) &
~PCS_ANAR_HALF_DUPLEX &
~PCS_ANAR_FULL_DUPLEX;
if (esr & (MII_ESR_1000BT_HD | MII_ESR_1000BX_HD))
@@ -1690,22 +1688,21 @@
if (esr & (MII_ESR_1000BT_FD | MII_ESR_1000BX_FD))
anar |= PCS_ANAR_FULL_DUPLEX;
anar |= PCS_ANAR_PAUSE | PCS_ANAR_ASYMMETRIC;
- mii_write (dev, phy_addr, MII_ANAR, anar);
+ mii_write (dev, phy_addr, MII_ADVERTISE, anar);
/* Soft reset PHY */
- mii_write (dev, phy_addr, MII_BMCR, MII_BMCR_RESET);
- bmcr = MII_BMCR_AN_ENABLE | MII_BMCR_RESTART_AN |
- MII_BMCR_RESET;
+ mii_write (dev, phy_addr, MII_BMCR, BMCR_RESET);
+ bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET;
mii_write (dev, phy_addr, MII_BMCR, bmcr);
mdelay(1);
} else {
/* Force speed setting */
/* PHY Reset */
- bmcr = MII_BMCR_RESET;
+ bmcr = BMCR_RESET;
mii_write (dev, phy_addr, MII_BMCR, bmcr);
mdelay(10);
if (np->full_duplex) {
- bmcr = MII_BMCR_DUPLEX_MODE;
+ bmcr = BMCR_FULLDPLX;
printk (KERN_INFO "Manual full duplex\n");
} else {
bmcr = 0;
@@ -1715,7 +1712,7 @@
mdelay(10);
/* Advertise nothing */
- mii_write (dev, phy_addr, MII_ANAR, 0);
+ mii_write (dev, phy_addr, MII_ADVERTISE, 0);
}
return 0;
}