[netdrvr forcedeth] phy address scan range
Added phy address 0 to the phy scan.
Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 731d0d7..525624f 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -99,6 +99,7 @@
* 0.44: 20 Aug 2005: Add support for scatter gather and segmentation.
* 0.45: 18 Sep 2005: Remove nv_stop/start_rx from every link check
* 0.46: 20 Oct 2005: Add irq optimization modes.
+ * 0.47: 26 Oct 2005: Add phyaddr 0 in phy scan.
*
* Known bugs:
* We suspect that on some hardware no TX done interrupts are generated.
@@ -110,7 +111,7 @@
* DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
* superfluous timer interrupts from the nic.
*/
-#define FORCEDETH_VERSION "0.46"
+#define FORCEDETH_VERSION "0.47"
#define DRV_NAME "forcedeth"
#include <linux/module.h>
@@ -2557,16 +2558,17 @@
}
/* find a suitable phy */
- for (i = 1; i < 32; i++) {
+ for (i = 1; i <= 32; i++) {
int id1, id2;
+ int phyaddr = i & 0x1F;
spin_lock_irq(&np->lock);
- id1 = mii_rw(dev, i, MII_PHYSID1, MII_READ);
+ id1 = mii_rw(dev, phyaddr, MII_PHYSID1, MII_READ);
spin_unlock_irq(&np->lock);
if (id1 < 0 || id1 == 0xffff)
continue;
spin_lock_irq(&np->lock);
- id2 = mii_rw(dev, i, MII_PHYSID2, MII_READ);
+ id2 = mii_rw(dev, phyaddr, MII_PHYSID2, MII_READ);
spin_unlock_irq(&np->lock);
if (id2 < 0 || id2 == 0xffff)
continue;
@@ -2574,23 +2576,19 @@
id1 = (id1 & PHYID1_OUI_MASK) << PHYID1_OUI_SHFT;
id2 = (id2 & PHYID2_OUI_MASK) >> PHYID2_OUI_SHFT;
dprintk(KERN_DEBUG "%s: open: Found PHY %04x:%04x at address %d.\n",
- pci_name(pci_dev), id1, id2, i);
- np->phyaddr = i;
+ pci_name(pci_dev), id1, id2, phyaddr);
+ np->phyaddr = phyaddr;
np->phy_oui = id1 | id2;
break;
}
- if (i == 32) {
- /* PHY in isolate mode? No phy attached and user wants to
- * test loopback? Very odd, but can be correct.
- */
+ if (i == 33) {
printk(KERN_INFO "%s: open: Could not find a valid PHY.\n",
- pci_name(pci_dev));
+ pci_name(pci_dev));
+ goto out_freering;
}
-
- if (i != 32) {
- /* reset it */
- phy_init(dev);
- }
+
+ /* reset it */
+ phy_init(dev);
/* set default link speed settings */
np->linkspeed = NVREG_LINKSPEED_FORCE|NVREG_LINKSPEED_10;