[SCSI] mpt2sas: Update driver to MPI2 REV K headers.
Drivers header are updated to the MPI2 REV K headers.
Renamed VF_ID to msix_index in all call back handlers.
VF_ID is removed from all request descriptor.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
index 2f27cf6..ab47c46 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.10
+ * mpi2_cnfg.h Version: 02.00.11
*
* Version History
* ---------------
@@ -95,6 +95,11 @@
* Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
* Added PortGroups, DmaGroup, and ControlGroup fields to
* SAS Device Page 0.
+ * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO
+ * Unit Page 6.
+ * Added expander reduced functionality data to SAS
+ * Expander Page 0.
+ * Added SAS PHY Page 2 and SAS PHY Page 3.
* --------------------------------------------------------------------------
*/
@@ -723,6 +728,65 @@
#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001)
+/* IO Unit Page 5 */
+
+/*
+ * Upper layer code (drivers, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength or NumDmaEngines at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
+#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
+ MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
+ U64 RaidAcceleratorBufferBaseAddress; /* 0x04 */
+ U64 RaidAcceleratorBufferSize; /* 0x0C */
+ U64 RaidAcceleratorControlBaseAddress; /* 0x14 */
+ U8 RAControlSize; /* 0x1C */
+ U8 NumDmaEngines; /* 0x1D */
+ U8 RAMinControlSize; /* 0x1E */
+ U8 RAMaxControlSize; /* 0x1F */
+ U32 Reserved1; /* 0x20 */
+ U32 Reserved2; /* 0x24 */
+ U32 Reserved3; /* 0x28 */
+ U32 DmaEngineCapabilities
+ [MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /* 0x2C */
+} MPI2_CONFIG_PAGE_IO_UNIT_5, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_5,
+ Mpi2IOUnitPage5_t, MPI2_POINTER pMpi2IOUnitPage5_t;
+
+#define MPI2_IOUNITPAGE5_PAGEVERSION (0x00)
+
+/* defines for IO Unit Page 5 DmaEngineCapabilities field */
+#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFF00)
+#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16)
+
+#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008)
+#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004)
+#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002)
+#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001)
+
+
+/* IO Unit Page 6 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 {
+ MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
+ U16 Flags; /* 0x04 */
+ U8 RAHostControlSize; /* 0x06 */
+ U8 Reserved0; /* 0x07 */
+ U64 RaidAcceleratorHostControlBaseAddress; /* 0x08 */
+ U32 Reserved1; /* 0x10 */
+ U32 Reserved2; /* 0x14 */
+ U32 Reserved3; /* 0x18 */
+} MPI2_CONFIG_PAGE_IO_UNIT_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_6,
+ Mpi2IOUnitPage6_t, MPI2_POINTER pMpi2IOUnitPage6_t;
+
+#define MPI2_IOUNITPAGE6_PAGEVERSION (0x00)
+
+/* defines for IO Unit Page 6 Flags field */
+#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001)
+
+
/****************************************************************************
* IOC Config Pages
****************************************************************************/
@@ -1709,10 +1773,14 @@
U64 ActiveZoneManagerSASAddress;/* 0x2C */
U16 ZoneLockInactivityLimit; /* 0x34 */
U16 Reserved1; /* 0x36 */
+ U8 TimeToReducedFunc; /* 0x38 */
+ U8 InitialTimeToReducedFunc; /* 0x39 */
+ U8 MaxReducedFuncTime; /* 0x3A */
+ U8 Reserved2; /* 0x3B */
} MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0,
Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t;
-#define MPI2_SASEXPANDER0_PAGEVERSION (0x05)
+#define MPI2_SASEXPANDER0_PAGEVERSION (0x06)
/* values for SAS Expander Page 0 DiscoveryStatus field */
#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
@@ -1737,6 +1805,7 @@
#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001)
/* values for SAS Expander Page 0 Flags field */
+#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000)
#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000)
#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800)
#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400)
@@ -1944,6 +2013,133 @@
#define MPI2_SASPHY1_PAGEVERSION (0x01)
+/* SAS PHY Page 2 */
+
+typedef struct _MPI2_SASPHY2_PHY_EVENT {
+ U8 PhyEventCode; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U16 Reserved2; /* 0x02 */
+ U32 PhyEventInfo; /* 0x04 */
+} MPI2_SASPHY2_PHY_EVENT, MPI2_POINTER PTR_MPI2_SASPHY2_PHY_EVENT,
+ Mpi2SasPhy2PhyEvent_t, MPI2_POINTER pMpi2SasPhy2PhyEvent_t;
+
+/* use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */
+
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.ExtPageLength or NumPhyEvents at runtime.
+ */
+#ifndef MPI2_SASPHY2_PHY_EVENT_MAX
+#define MPI2_SASPHY2_PHY_EVENT_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U32 Reserved1; /* 0x08 */
+ U8 NumPhyEvents; /* 0x0C */
+ U8 Reserved2; /* 0x0D */
+ U16 Reserved3; /* 0x0E */
+ MPI2_SASPHY2_PHY_EVENT PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX];
+ /* 0x10 */
+} MPI2_CONFIG_PAGE_SAS_PHY_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_2,
+ Mpi2SasPhyPage2_t, MPI2_POINTER pMpi2SasPhyPage2_t;
+
+#define MPI2_SASPHY2_PAGEVERSION (0x00)
+
+
+/* SAS PHY Page 3 */
+
+typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG {
+ U8 PhyEventCode; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U16 Reserved2; /* 0x02 */
+ U8 CounterType; /* 0x04 */
+ U8 ThresholdWindow; /* 0x05 */
+ U8 TimeUnits; /* 0x06 */
+ U8 Reserved3; /* 0x07 */
+ U32 EventThreshold; /* 0x08 */
+ U16 ThresholdFlags; /* 0x0C */
+ U16 Reserved4; /* 0x0E */
+} MPI2_SASPHY3_PHY_EVENT_CONFIG, MPI2_POINTER PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG,
+ Mpi2SasPhy3PhyEventConfig_t, MPI2_POINTER pMpi2SasPhy3PhyEventConfig_t;
+
+/* values for PhyEventCode field */
+#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00)
+#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01)
+#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02)
+#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03)
+#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04)
+#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05)
+#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06)
+#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20)
+#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22)
+#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23)
+#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26)
+#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27)
+#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28)
+#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29)
+#define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A)
+#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B)
+#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C)
+#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D)
+#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43)
+#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44)
+#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51)
+#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63)
+#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0)
+#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2)
+
+/* values for the CounterType field */
+#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00)
+#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01)
+#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02)
+
+/* values for the TimeUnits field */
+#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00)
+#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01)
+#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02)
+#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03)
+
+/* values for the ThresholdFlags field */
+#define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002)
+#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.ExtPageLength or NumPhyEvents at runtime.
+ */
+#ifndef MPI2_SASPHY3_PHY_EVENT_MAX
+#define MPI2_SASPHY3_PHY_EVENT_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U32 Reserved1; /* 0x08 */
+ U8 NumPhyEvents; /* 0x0C */
+ U8 Reserved2; /* 0x0D */
+ U16 Reserved3; /* 0x0E */
+ MPI2_SASPHY3_PHY_EVENT_CONFIG PhyEventConfig
+ [MPI2_SASPHY3_PHY_EVENT_MAX]; /* 0x10 */
+} MPI2_CONFIG_PAGE_SAS_PHY_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_3,
+ Mpi2SasPhyPage3_t, MPI2_POINTER pMpi2SasPhyPage3_t;
+
+#define MPI2_SASPHY3_PAGEVERSION (0x00)
+
+
/****************************************************************************
* SAS Port Config Pages
****************************************************************************/