irq_domain: Make irq_domain structure match powerpc's irq_host
Part of the series to unify the irq remapping mechanisms in the
kernel. A follow up patch will copy the powerpc implementation into
kernel/irq/irqdomain.c, which will be a lot easier if the structures
are identical.
Where they differ, I've chose to use the powerpc names since there is
a lot more code using those names.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: Olof Johansson <olof@lixom.net>
diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
index bd4272b..35b9ff3 100644
--- a/include/linux/irqdomain.h
+++ b/include/linux/irqdomain.h
@@ -9,61 +9,105 @@
* representation into a hardware irq number that can be mapped back to a
* Linux irq number without any extra platform support code.
*
- * irq_domain is expected to be embedded in an interrupt controller's private
- * data structure.
+ * Interrupt controller "domain" data structure. This could be defined as a
+ * irq domain controller. That is, it handles the mapping between hardware
+ * and virtual interrupt numbers for a given interrupt domain. The domain
+ * structure is generally created by the PIC code for a given PIC instance
+ * (though a domain can cover more than one PIC if they have a flat number
+ * model). It's the domain callbacks that are responsible for setting the
+ * irq_chip on a given irq_desc after it's been mapped.
*/
+
#ifndef _LINUX_IRQDOMAIN_H
#define _LINUX_IRQDOMAIN_H
-#include <linux/irq.h>
-#include <linux/mod_devicetable.h>
+#include <linux/types.h>
+#include <linux/radix-tree.h>
-#ifdef CONFIG_IRQ_DOMAIN
struct device_node;
struct irq_domain;
+struct of_device_id;
+
+/* This type is the placeholder for a hardware interrupt number. It has to
+ * be big enough to enclose whatever representation is used by a given
+ * platform.
+ */
+typedef unsigned long irq_hw_number_t;
/**
* struct irq_domain_ops - Methods for irq_domain objects
+ * @match: Match an interrupt controller device node to a host, returns
+ * 1 on a match
+ * @map: Create or update a mapping between a virtual irq number and a hw
+ * irq number. This is called only once for a given mapping.
+ * @unmap: Dispose of such a mapping
* @to_irq: (optional) given a local hardware irq number, return the linux
* irq number. If to_irq is not implemented, then the irq_domain
* will use this translation: irq = (domain->irq_base + hwirq)
- * @dt_translate: Given a device tree node and interrupt specifier, decode
- * the hardware irq number and linux irq type value.
+ * @xlate: Given a device tree node and interrupt specifier, decode
+ * the hardware irq number and linux irq type value.
+ *
+ * Functions below are provided by the driver and called whenever a new mapping
+ * is created or an old mapping is disposed. The driver can then proceed to
+ * whatever internal data structures management is required. It also needs
+ * to setup the irq_desc when returning from map().
*/
struct irq_domain_ops {
+ int (*match)(struct irq_domain *d, struct device_node *node);
+ int (*map)(struct irq_domain *d, unsigned int virq, irq_hw_number_t hw);
+ void (*unmap)(struct irq_domain *d, unsigned int virq);
unsigned int (*to_irq)(struct irq_domain *d, unsigned long hwirq);
-
-#ifdef CONFIG_OF
- int (*dt_translate)(struct irq_domain *d, struct device_node *node,
- const u32 *intspec, unsigned int intsize,
- unsigned long *out_hwirq, unsigned int *out_type);
-#endif /* CONFIG_OF */
+ int (*xlate)(struct irq_domain *d, struct device_node *node,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type);
};
/**
* struct irq_domain - Hardware interrupt number translation object
- * @list: Element in global irq_domain list.
+ * @link: Element in global irq_domain list.
+ * @revmap_type: Method used for reverse mapping hwirq numbers to linux irq. This
+ * will be one of the IRQ_DOMAIN_MAP_* values.
+ * @revmap_data: Revmap method specific data.
+ * @ops: pointer to irq_domain methods
+ * @host_data: private data pointer for use by owner. Not touched by irq_domain
+ * core code.
* @irq_base: Start of irq_desc range assigned to the irq_domain. The creator
* of the irq_domain is responsible for allocating the array of
* irq_desc structures.
* @nr_irq: Number of irqs managed by the irq domain
* @hwirq_base: Starting number for hwirqs managed by the irq domain
- * @ops: pointer to irq_domain methods
- * @priv: private data pointer for use by owner. Not touched by irq_domain
- * core code.
* @of_node: (optional) Pointer to device tree nodes associated with the
* irq_domain. Used when decoding device tree interrupt specifiers.
*/
struct irq_domain {
- struct list_head list;
+ struct list_head link;
+
+ /* type of reverse mapping_technique */
+ unsigned int revmap_type;
+#define IRQ_DOMAIN_MAP_LEGACY 0 /* legacy 8259, gets irqs 1..15 */
+#define IRQ_DOMAIN_MAP_NOMAP 1 /* no fast reverse mapping */
+#define IRQ_DOMAIN_MAP_LINEAR 2 /* linear map of interrupts */
+#define IRQ_DOMAIN_MAP_TREE 3 /* radix tree */
+ union {
+ struct {
+ unsigned int size;
+ unsigned int *revmap;
+ } linear;
+ struct radix_tree_root tree;
+ } revmap_data;
+ struct irq_domain_ops *ops;
+ void *host_data;
+ irq_hw_number_t inval_irq;
+
unsigned int irq_base;
unsigned int nr_irq;
unsigned int hwirq_base;
- const struct irq_domain_ops *ops;
- void *priv;
+
+ /* Optional device node pointer */
struct device_node *of_node;
};
+#ifdef CONFIG_IRQ_DOMAIN
/**
* irq_domain_to_irq() - Translate from a hardware irq to a linux irq number
*