V4L/DVB (10121): em28xx: remove worthless Pinnacle PCTV HD Mini 80e device profile
The Pinnacle 80e cannot be supported since Micronas yanked their driver
support for the drx-j chipset at the last minute. Remove the device profile
since it cannot work without the drx driver and it being there is only likely
to confuse people into thinking the device is supported but not working.
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 79fd7f9..75bded8 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -56,6 +56,5 @@
56 -> Pinnacle Hybrid Pro (2) (em2882) [2304:0226]
57 -> Kworld PlusTV HD Hybrid 330 (em2883) [eb1a:a316]
58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041]
- 59 -> Pinnacle PCTV HD Mini (em2874) [2304:023f]
60 -> Hauppauge WinTV HVR 850 (em2883) [2040:651f]
61 -> Pixelview PlayTV Box 4 USB 2.0 (em2820/em2840)
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 41d86e6..84191c9 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -110,17 +110,6 @@
{ -1, -1, -1, -1},
};
-/* Pinnacle PCTV HD Mini (80e) GPIOs
- 0-5: not used
- 6: demod reset, active low
- 7: LED on, active high */
-static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = {
- {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/
- {EM2874_R80_GPIO, 0x80, 0xff, 100},/*Demod reset*/
- {EM2874_R80_GPIO, 0xc0, 0xff, 10},
- { -1, -1, -1, -1},
-};
-
/*
* Board definitions
*/
@@ -1228,27 +1217,6 @@
.amux = EM28XX_AMUX_LINE_IN,
} },
},
-
- /* em2874 tuners are DVB only */
-
- [EM2874_BOARD_PINNACLE_PCTV_80E] = {
- .name = "Pinnacle PCTV HD Mini",
- .tuner_type = TUNER_ABSENT,
- .has_dvb = 1,
- .dvb_gpio = em2874_pinnacle_80e_digital,
- .ir_codes = ir_codes_pinnacle_pctv_hd,
- .decoder = EM28XX_NODECODER,
- .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
- EM2874_I2C_SECONDARY_BUS_SELECT |
- EM28XX_I2C_FREQ_400_KHZ,
-#ifdef DJH_DEBUG
- .input = { {
- .type = EM28XX_VMUX_TELEVISION,
- .vmux = TVP5150_COMPOSITE0,
- .amux = EM28XX_AMUX_LINE_IN,
- } },
-#endif
- },
};
const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
@@ -1342,8 +1310,6 @@
.driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
{ USB_DEVICE(0x2304, 0x0227),
.driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
- { USB_DEVICE(0x2304, 0x023f),
- .driver_info = EM2874_BOARD_PINNACLE_PCTV_80E },
{ USB_DEVICE(0x0413, 0x6023),
.driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
{ USB_DEVICE(0x093b, 0xa005),
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 650f4ec..b5eddc2 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -96,7 +96,6 @@
#define EM2882_BOARD_PINNACLE_HYBRID_PRO 56
#define EM2883_BOARD_KWORLD_HYBRID_A316 57
#define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58
-#define EM2874_BOARD_PINNACLE_PCTV_80E 59
#define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 60
#define EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2 61