USB: remove err() macro from more usb drivers
USB should not be having it's own printk macros, so remove err() and
use the system-wide standard of dev_err() wherever possible. In the
few places that will not work out, use a basic printk().
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index ad44bd6..af849f5 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -218,7 +218,7 @@
* and reading back and checking the contents are same or not
*/
if (reg_data != 0xFACE) {
- err("scratch register mismatch %x", reg_data);
+ dev_err(&dev->dev, "scratch register mismatch %x\n", reg_data);
goto clean;
}
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 2a9bec2..c18d879 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -118,7 +118,7 @@
r8a66597_write(r8a66597, SCKE, SYSCFG0);
tmp = r8a66597_read(r8a66597, SYSCFG0);
if (i++ > 1000) {
- err("register access fail.");
+ printk(KERN_ERR "r8a66597: register access fail.\n");
return -ENXIO;
}
} while ((tmp & SCKE) != SCKE);
@@ -128,7 +128,7 @@
r8a66597_write(r8a66597, USBE, SYSCFG0);
tmp = r8a66597_read(r8a66597, SYSCFG0);
if (i++ > 1000) {
- err("register access fail.");
+ printk(KERN_ERR "r8a66597: register access fail.\n");
return -ENXIO;
}
} while ((tmp & USBE) != USBE);
@@ -141,7 +141,7 @@
msleep(1);
tmp = r8a66597_read(r8a66597, SYSCFG0);
if (i++ > 500) {
- err("register access fail.");
+ printk(KERN_ERR "r8a66597: register access fail.\n");
return -ENXIO;
}
} while ((tmp & SCKE) != SCKE);
@@ -265,7 +265,7 @@
if (root_port) {
*root_port = (devpath[0] & 0x0F) - 1;
if (*root_port >= R8A66597_MAX_ROOT_HUB)
- err("illegal root port number");
+ printk(KERN_ERR "r8a66597: Illegal root port number.\n");
}
if (hub_port)
*hub_port = devpath[2] & 0x0F;
@@ -286,7 +286,7 @@
usbspd = HSMODE;
break;
default:
- err("unknown speed");
+ printk(KERN_ERR "r8a66597: unknown speed\n");
break;
}
@@ -385,7 +385,7 @@
struct r8a66597_device *dev;
if (is_hub_limit(urb->dev->devpath)) {
- err("Externel hub limit reached.");
+ dev_err(&urb->dev->dev, "External hub limit reached.\n");
return 0;
}
@@ -406,8 +406,9 @@
return addr;
}
- err("cannot communicate with a USB device more than 10.(%x)",
- r8a66597->address_map);
+ dev_err(&urb->dev->dev,
+ "cannot communicate with a USB device more than 10.(%x)\n",
+ r8a66597->address_map);
return 0;
}
@@ -447,7 +448,8 @@
do {
tmp = r8a66597_read(r8a66597, reg);
if (i++ > 1000000) {
- err("register%lx, loop %x is timeout", reg, loop);
+ printk(KERN_ERR "r8a66597: register%lx, loop %x "
+ "is timeout\n", reg, loop);
break;
}
ndelay(1);
@@ -675,7 +677,7 @@
array[i++] = 1;
break;
default:
- err("Illegal type");
+ printk(KERN_ERR "r8a66597: Illegal type\n");
return 0;
}
@@ -705,7 +707,7 @@
r8a66597_type = R8A66597_ISO;
break;
default:
- err("Illegal type");
+ printk(KERN_ERR "r8a66597: Illegal type\n");
r8a66597_type = 0x0000;
break;
}
@@ -724,7 +726,7 @@
else if (check_interrupt(pipenum))
bufnum = 4 + (pipenum - 6);
else
- err("Illegal pipenum (%d)", pipenum);
+ printk(KERN_ERR "r8a66597: Illegal pipenum (%d)\n", pipenum);
return bufnum;
}
@@ -740,7 +742,7 @@
else if (check_interrupt(pipenum))
buf_bsize = 0;
else
- err("Illegal pipenum (%d)", pipenum);
+ printk(KERN_ERR "r8a66597: Illegal pipenum (%d)\n", pipenum);
return buf_bsize;
}
@@ -1189,7 +1191,7 @@
prepare_status_packet(r8a66597, td);
break;
default:
- err("invalid type.");
+ printk(KERN_ERR "r8a66597: invalid type.\n");
break;
}
@@ -1297,7 +1299,7 @@
if (unlikely((tmp & FRDY) == 0)) {
pipe_stop(r8a66597, td->pipe);
pipe_irq_disable(r8a66597, pipenum);
- err("in fifo not ready (%d)", pipenum);
+ printk(KERN_ERR "r8a66597: in fifo not ready (%d)\n", pipenum);
finish_request(r8a66597, td, pipenum, td->urb, -EPIPE);
return;
}
@@ -1372,7 +1374,7 @@
if (unlikely((tmp & FRDY) == 0)) {
pipe_stop(r8a66597, td->pipe);
pipe_irq_disable(r8a66597, pipenum);
- err("out write fifo not ready. (%d)", pipenum);
+ printk(KERN_ERR "r8a66597: out fifo not ready (%d)\n", pipenum);
finish_request(r8a66597, td, pipenum, urb, -EPIPE);
return;
}
@@ -2007,7 +2009,7 @@
return dev;
}
- err("get_r8a66597_device fail.(%d)\n", addr);
+ printk(KERN_ERR "r8a66597: get_r8a66597_device fail.(%d)\n", addr);
return NULL;
}
@@ -2276,7 +2278,7 @@
if (pdev->dev.dma_mask) {
ret = -EINVAL;
- err("dma not support");
+ dev_err(&pdev->dev, "dma not supported\n");
goto clean_up;
}
@@ -2284,14 +2286,15 @@
(char *)hcd_name);
if (!res) {
ret = -ENODEV;
- err("platform_get_resource_byname error.");
+ dev_err(&pdev->dev, "platform_get_resource_byname error.\n");
goto clean_up;
}
ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!ires) {
ret = -ENODEV;
- err("platform_get_resource IORESOURCE_IRQ error.");
+ dev_err(&pdev->dev,
+ "platform_get_resource IORESOURCE_IRQ error.\n");
goto clean_up;
}
@@ -2301,7 +2304,7 @@
reg = ioremap(res->start, resource_len(res));
if (reg == NULL) {
ret = -ENOMEM;
- err("ioremap error.");
+ dev_err(&pdev->dev, "ioremap error.\n");
goto clean_up;
}
@@ -2309,7 +2312,7 @@
hcd = usb_create_hcd(&r8a66597_hc_driver, &pdev->dev, (char *)hcd_name);
if (!hcd) {
ret = -ENOMEM;
- err("Failed to create hcd");
+ dev_err(&pdev->dev, "Failed to create hcd\n");
goto clean_up;
}
r8a66597 = hcd_to_r8a66597(hcd);
@@ -2355,12 +2358,12 @@
}
break;
default:
- err("Unknown irq_sense value.");
+ dev_err(&pdev->dev, "Unknown irq_sense value.\n");
}
ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger);
if (ret != 0) {
- err("Failed to add hcd");
+ dev_err(&pdev->dev, "Failed to add hcd\n");
goto clean_up;
}
diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index dd432c8..878c77c 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -355,7 +355,7 @@
if (mdc800->camera_request_ready>0)
{
mdc800->camera_request_ready=0;
- err ("timeout waiting for camera.");
+ dev_err(&mdc800->dev->dev, "timeout waiting for camera.\n");
return -1;
}
@@ -380,7 +380,8 @@
int status = urb->status;
if (status != 0)
- err ("writing command fails (status=%i)", status);
+ dev_err(&mdc800->dev->dev,
+ "writing command fails (status=%i)\n", status);
else
mdc800->state=READY;
mdc800->written = 1;
@@ -407,7 +408,8 @@
mdc800->state=READY;
}
} else {
- err ("request bytes fails (status:%i)", status);
+ dev_err(&mdc800->dev->dev,
+ "request bytes fails (status:%i)\n", status);
}
mdc800->downloaded = 1;
wake_up (&mdc800->download_wait);
@@ -450,7 +452,8 @@
if (dev->descriptor.bNumConfigurations != 1)
{
- err ("probe fails -> wrong Number of Configuration");
+ dev_err(&intf->dev,
+ "probe fails -> wrong Number of Configuration\n");
return -ENODEV;
}
intf_desc = intf->cur_altsetting;
@@ -462,7 +465,7 @@
|| ( intf_desc->desc.bNumEndpoints != 4)
)
{
- err ("probe fails -> wrong Interface");
+ dev_err(&intf->dev, "probe fails -> wrong Interface\n");
return -ENODEV;
}
@@ -483,7 +486,7 @@
}
if (mdc800->endpoint[i] == -1)
{
- err ("probe fails -> Wrong Endpoints.");
+ dev_err(&intf->dev, "probe fails -> Wrong Endpoints.\n");
return -ENODEV;
}
}
@@ -495,7 +498,7 @@
retval = usb_register_dev(intf, &mdc800_class);
if (retval) {
- err ("Not able to get a minor for this device.");
+ dev_err(&intf->dev, "Not able to get a minor for this device.\n");
return -ENODEV;
}
@@ -645,7 +648,8 @@
mdc800->irq_urb->dev = mdc800->dev;
retval = usb_submit_urb (mdc800->irq_urb, GFP_KERNEL);
if (retval) {
- err ("request USB irq fails (submit_retval=%i).", retval);
+ dev_err(&mdc800->dev->dev,
+ "request USB irq fails (submit_retval=%i).\n", retval);
errn = -EIO;
goto error_out;
}
@@ -735,7 +739,9 @@
mdc800->download_urb->dev = mdc800->dev;
retval = usb_submit_urb (mdc800->download_urb, GFP_KERNEL);
if (retval) {
- err ("Can't submit download urb (retval=%i)",retval);
+ dev_err(&mdc800->dev->dev,
+ "Can't submit download urb "
+ "(retval=%i)\n", retval);
mutex_unlock(&mdc800->io_lock);
return len-left;
}
@@ -744,7 +750,10 @@
mdc800->downloaded = 0;
if (mdc800->download_urb->status != 0)
{
- err ("request download-bytes fails (status=%i)",mdc800->download_urb->status);
+ dev_err(&mdc800->dev->dev,
+ "request download-bytes fails "
+ "(status=%i)\n",
+ mdc800->download_urb->status);
mutex_unlock(&mdc800->io_lock);
return len-left;
}
@@ -841,7 +850,8 @@
if (mdc800_usb_waitForIRQ (0,TO_GET_READY))
{
- err ("Camera didn't get ready.\n");
+ dev_err(&mdc800->dev->dev,
+ "Camera didn't get ready.\n");
mutex_unlock(&mdc800->io_lock);
return -EIO;
}
@@ -853,7 +863,9 @@
mdc800->write_urb->dev = mdc800->dev;
retval = usb_submit_urb (mdc800->write_urb, GFP_KERNEL);
if (retval) {
- err ("submitting write urb fails (retval=%i)", retval);
+ dev_err(&mdc800->dev->dev,
+ "submitting write urb fails "
+ "(retval=%i)\n", retval);
mutex_unlock(&mdc800->io_lock);
return -EIO;
}
@@ -872,7 +884,9 @@
case 0x3e: /* Take shot in Fine Mode (WCam Mode) */
if (mdc800->pic_len < 0)
{
- err ("call 0x07 before 0x05,0x3e");
+ dev_err(&mdc800->dev->dev,
+ "call 0x07 before "
+ "0x05,0x3e\n");
mdc800->state=READY;
mutex_unlock(&mdc800->io_lock);
return -EIO;
@@ -892,7 +906,7 @@
if (mdc800_usb_waitForIRQ (1,TO_READ_FROM_IRQ))
{
- err ("requesting answer from irq fails");
+ dev_err(&mdc800->dev->dev, "requesting answer from irq fails\n");
mutex_unlock(&mdc800->io_lock);
return -EIO;
}
@@ -920,7 +934,7 @@
{
if (mdc800_usb_waitForIRQ (0,TO_DEFAULT_COMMAND))
{
- err ("Command Timeout.");
+ dev_err(&mdc800->dev->dev, "Command Timeout.\n");
mutex_unlock(&mdc800->io_lock);
return -EIO;
}
@@ -1031,7 +1045,7 @@
if (mdc800 != NULL)
{
- err ("can't alloc memory!");
+ printk(KERN_ERR "mdc800: can't alloc memory!\n");
kfree(mdc800->download_urb_buffer);
kfree(mdc800->write_urb_buffer);
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index 98b89ea..c7bf895 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -78,8 +78,8 @@
resubmit:
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
- err ("can't resubmit intr, %s-%s/input0, retval %d",
- onetouch->udev->bus->bus_name,
+ dev_err(&dev->dev, "can't resubmit intr, %s-%s/input0, "
+ "retval %d\n", onetouch->udev->bus->bus_name,
onetouch->udev->devpath, retval);
}
@@ -90,7 +90,7 @@
onetouch->is_open = 1;
onetouch->irq->dev = onetouch->udev;
if (usb_submit_urb(onetouch->irq, GFP_KERNEL)) {
- err("usb_submit_urb failed");
+ dev_err(&dev->dev, "usb_submit_urb failed\n");
return -EIO;
}
@@ -117,7 +117,8 @@
break;
case US_RESUME:
if (usb_submit_urb(onetouch->irq, GFP_KERNEL) != 0)
- err("usb_submit_urb failed");
+ dev_err(&onetouch->irq->dev->dev,
+ "usb_submit_urb failed\n");
break;
default:
break;