MIPS: Alchemy: Au1300 SoC support
Add basic support for the Au1300 variant(s):
- New GPIO/Interrupt controller
- DBDMA ids
- USB setup
- MMC support
- enable various PSC drivers
- detection code.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2866/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/drivers/usb/host/alchemy-common.c b/drivers/usb/host/alchemy-common.c
index b4192c9..936af83 100644
--- a/drivers/usb/host/alchemy-common.c
+++ b/drivers/usb/host/alchemy-common.c
@@ -52,9 +52,263 @@
USBCFG_EBE | USBCFG_EME | USBCFG_OBE | \
USBCFG_OME)
+/* Au1300 USB config registers */
+#define USB_DWC_CTRL1 0x00
+#define USB_DWC_CTRL2 0x04
+#define USB_VBUS_TIMER 0x10
+#define USB_SBUS_CTRL 0x14
+#define USB_MSR_ERR 0x18
+#define USB_DWC_CTRL3 0x1C
+#define USB_DWC_CTRL4 0x20
+#define USB_OTG_STATUS 0x28
+#define USB_DWC_CTRL5 0x2C
+#define USB_DWC_CTRL6 0x30
+#define USB_DWC_CTRL7 0x34
+#define USB_PHY_STATUS 0xC0
+#define USB_INT_STATUS 0xC4
+#define USB_INT_ENABLE 0xC8
+
+#define USB_DWC_CTRL1_OTGD 0x04 /* set to DISable OTG */
+#define USB_DWC_CTRL1_HSTRS 0x02 /* set to ENable EHCI */
+#define USB_DWC_CTRL1_DCRS 0x01 /* set to ENable UDC */
+
+#define USB_DWC_CTRL2_PHY1RS 0x04 /* set to enable PHY1 */
+#define USB_DWC_CTRL2_PHY0RS 0x02 /* set to enable PHY0 */
+#define USB_DWC_CTRL2_PHYRS 0x01 /* set to enable PHY */
+
+#define USB_DWC_CTRL3_OHCI1_CKEN (1 << 19)
+#define USB_DWC_CTRL3_OHCI0_CKEN (1 << 18)
+#define USB_DWC_CTRL3_EHCI0_CKEN (1 << 17)
+#define USB_DWC_CTRL3_OTG0_CKEN (1 << 16)
+
+#define USB_SBUS_CTRL_SBCA 0x04 /* coherent access */
+
+#define USB_INTEN_FORCE 0x20
+#define USB_INTEN_PHY 0x10
+#define USB_INTEN_UDC 0x08
+#define USB_INTEN_EHCI 0x04
+#define USB_INTEN_OHCI1 0x02
+#define USB_INTEN_OHCI0 0x01
static DEFINE_SPINLOCK(alchemy_usb_lock);
+static inline void __au1300_usb_phyctl(void __iomem *base, int enable)
+{
+ unsigned long r, s;
+
+ r = __raw_readl(base + USB_DWC_CTRL2);
+ s = __raw_readl(base + USB_DWC_CTRL3);
+
+ s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN |
+ USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN;
+
+ if (enable) {
+ /* simply enable all PHYs */
+ r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
+ USB_DWC_CTRL2_PHYRS;
+ __raw_writel(r, base + USB_DWC_CTRL2);
+ wmb();
+ } else if (!s) {
+ /* no USB block active, do disable all PHYs */
+ r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
+ USB_DWC_CTRL2_PHYRS);
+ __raw_writel(r, base + USB_DWC_CTRL2);
+ wmb();
+ }
+}
+
+static inline void __au1300_ohci_control(void __iomem *base, int enable, int id)
+{
+ unsigned long r;
+
+ if (enable) {
+ __raw_writel(1, base + USB_DWC_CTRL7); /* start OHCI clock */
+ wmb();
+
+ r = __raw_readl(base + USB_DWC_CTRL3); /* enable OHCI block */
+ r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
+ : USB_DWC_CTRL3_OHCI1_CKEN;
+ __raw_writel(r, base + USB_DWC_CTRL3);
+ wmb();
+
+ __au1300_usb_phyctl(base, enable); /* power up the PHYs */
+
+ r = __raw_readl(base + USB_INT_ENABLE);
+ r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1;
+ __raw_writel(r, base + USB_INT_ENABLE);
+ wmb();
+
+ /* reset the OHCI start clock bit */
+ __raw_writel(0, base + USB_DWC_CTRL7);
+ wmb();
+ } else {
+ r = __raw_readl(base + USB_INT_ENABLE);
+ r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1);
+ __raw_writel(r, base + USB_INT_ENABLE);
+ wmb();
+
+ r = __raw_readl(base + USB_DWC_CTRL3);
+ r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
+ : USB_DWC_CTRL3_OHCI1_CKEN);
+ __raw_writel(r, base + USB_DWC_CTRL3);
+ wmb();
+
+ __au1300_usb_phyctl(base, enable);
+ }
+}
+
+static inline void __au1300_ehci_control(void __iomem *base, int enable)
+{
+ unsigned long r;
+
+ if (enable) {
+ r = __raw_readl(base + USB_DWC_CTRL3);
+ r |= USB_DWC_CTRL3_EHCI0_CKEN;
+ __raw_writel(r, base + USB_DWC_CTRL3);
+ wmb();
+
+ r = __raw_readl(base + USB_DWC_CTRL1);
+ r |= USB_DWC_CTRL1_HSTRS;
+ __raw_writel(r, base + USB_DWC_CTRL1);
+ wmb();
+
+ __au1300_usb_phyctl(base, enable);
+
+ r = __raw_readl(base + USB_INT_ENABLE);
+ r |= USB_INTEN_EHCI;
+ __raw_writel(r, base + USB_INT_ENABLE);
+ wmb();
+ } else {
+ r = __raw_readl(base + USB_INT_ENABLE);
+ r &= ~USB_INTEN_EHCI;
+ __raw_writel(r, base + USB_INT_ENABLE);
+ wmb();
+
+ r = __raw_readl(base + USB_DWC_CTRL1);
+ r &= ~USB_DWC_CTRL1_HSTRS;
+ __raw_writel(r, base + USB_DWC_CTRL1);
+ wmb();
+
+ r = __raw_readl(base + USB_DWC_CTRL3);
+ r &= ~USB_DWC_CTRL3_EHCI0_CKEN;
+ __raw_writel(r, base + USB_DWC_CTRL3);
+ wmb();
+
+ __au1300_usb_phyctl(base, enable);
+ }
+}
+
+static inline void __au1300_udc_control(void __iomem *base, int enable)
+{
+ unsigned long r;
+
+ if (enable) {
+ r = __raw_readl(base + USB_DWC_CTRL1);
+ r |= USB_DWC_CTRL1_DCRS;
+ __raw_writel(r, base + USB_DWC_CTRL1);
+ wmb();
+
+ __au1300_usb_phyctl(base, enable);
+
+ r = __raw_readl(base + USB_INT_ENABLE);
+ r |= USB_INTEN_UDC;
+ __raw_writel(r, base + USB_INT_ENABLE);
+ wmb();
+ } else {
+ r = __raw_readl(base + USB_INT_ENABLE);
+ r &= ~USB_INTEN_UDC;
+ __raw_writel(r, base + USB_INT_ENABLE);
+ wmb();
+
+ r = __raw_readl(base + USB_DWC_CTRL1);
+ r &= ~USB_DWC_CTRL1_DCRS;
+ __raw_writel(r, base + USB_DWC_CTRL1);
+ wmb();
+
+ __au1300_usb_phyctl(base, enable);
+ }
+}
+
+static inline void __au1300_otg_control(void __iomem *base, int enable)
+{
+ unsigned long r;
+ if (enable) {
+ r = __raw_readl(base + USB_DWC_CTRL3);
+ r |= USB_DWC_CTRL3_OTG0_CKEN;
+ __raw_writel(r, base + USB_DWC_CTRL3);
+ wmb();
+
+ r = __raw_readl(base + USB_DWC_CTRL1);
+ r &= ~USB_DWC_CTRL1_OTGD;
+ __raw_writel(r, base + USB_DWC_CTRL1);
+ wmb();
+
+ __au1300_usb_phyctl(base, enable);
+ } else {
+ r = __raw_readl(base + USB_DWC_CTRL1);
+ r |= USB_DWC_CTRL1_OTGD;
+ __raw_writel(r, base + USB_DWC_CTRL1);
+ wmb();
+
+ r = __raw_readl(base + USB_DWC_CTRL3);
+ r &= ~USB_DWC_CTRL3_OTG0_CKEN;
+ __raw_writel(r, base + USB_DWC_CTRL3);
+ wmb();
+
+ __au1300_usb_phyctl(base, enable);
+ }
+}
+
+static inline int au1300_usb_control(int block, int enable)
+{
+ void __iomem *base =
+ (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
+ int ret = 0;
+
+ switch (block) {
+ case ALCHEMY_USB_OHCI0:
+ __au1300_ohci_control(base, enable, 0);
+ break;
+ case ALCHEMY_USB_OHCI1:
+ __au1300_ohci_control(base, enable, 1);
+ break;
+ case ALCHEMY_USB_EHCI0:
+ __au1300_ehci_control(base, enable);
+ break;
+ case ALCHEMY_USB_UDC0:
+ __au1300_udc_control(base, enable);
+ break;
+ case ALCHEMY_USB_OTG0:
+ __au1300_otg_control(base, enable);
+ break;
+ default:
+ ret = -ENODEV;
+ }
+ return ret;
+}
+
+static inline void au1300_usb_init(void)
+{
+ void __iomem *base =
+ (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
+
+ /* set some sane defaults. Note: we don't fiddle with DWC_CTRL4
+ * here at all: Port 2 routing (EHCI or UDC) must be set either
+ * by boot firmware or platform init code; I can't autodetect
+ * a sane setting.
+ */
+ __raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */
+ wmb();
+ __raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */
+ wmb();
+ __raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */
+ wmb();
+ __raw_writel(~0, base + USB_INT_STATUS); /* clear int status */
+ wmb();
+ /* set coherent access bit */
+ __raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL);
+ wmb();
+}
static inline void __au1200_ohci_control(void __iomem *base, int enable)
{
@@ -233,6 +487,9 @@
case ALCHEMY_CPU_AU1200:
ret = au1200_usb_control(block, enable);
break;
+ case ALCHEMY_CPU_AU1300:
+ ret = au1300_usb_control(block, enable);
+ break;
default:
ret = -ENODEV;
}
@@ -281,6 +538,20 @@
}
}
+static void au1300_usb_pm(int susp)
+{
+ void __iomem *base =
+ (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
+ /* remember Port2 routing */
+ if (susp) {
+ alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4);
+ } else {
+ au1300_usb_init();
+ __raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4);
+ wmb();
+ }
+}
+
static void alchemy_usb_pm(int susp)
{
switch (alchemy_get_cputype()) {
@@ -295,6 +566,9 @@
case ALCHEMY_CPU_AU1200:
au1200_usb_pm(susp);
break;
+ case ALCHEMY_CPU_AU1300:
+ au1300_usb_pm(susp);
+ break;
}
}
@@ -328,6 +602,9 @@
case ALCHEMY_CPU_AU1200:
au1200_usb_init();
break;
+ case ALCHEMY_CPU_AU1300:
+ au1300_usb_init();
+ break;
}
register_syscore_ops(&alchemy_usb_pm_ops);