usb: dwc3: add lpm erratum support
When parameter DWC_USB3_LPM_ERRATA_ENABLE is enabled in Andvanced
Configuration of coreConsultant, it supports of xHCI BESL Errata Dated
10/19/2011 is enabled in host mode. In device mode it adds the capability
to send NYET response threshold based on the BESL value received in the LPM
token, and the threhold is configurable for each soc platform.
This patch adds an entry that soc platform is able to define the lpm
capacity with their own device tree or bus glue layer.
[ balbi@ti.com : added devicetree documentation, spelled threshold
completely, made sure threshold is only applied to
proper core revisions. ]
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index a0ae132..6f9e5b85 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -657,6 +657,7 @@
struct device_node *node = dev->of_node;
struct resource *res;
struct dwc3 *dwc;
+ u8 lpm_nyet_threshold;
int ret;
@@ -712,16 +713,27 @@
*/
res->start -= DWC3_GLOBALS_REGS_START;
+ /* default to highest possible threshold */
+ lpm_nyet_threshold = 0xff;
+
if (node) {
dwc->maximum_speed = of_usb_get_maximum_speed(node);
+ dwc->has_lpm_erratum = of_property_read_bool(node,
+ "snps,has-lpm-erratum");
+ of_property_read_u8(node, "snps,lpm-nyet-threshold",
+ &lpm_nyet_threshold);
- dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");
+ dwc->needs_fifo_resize = of_property_read_bool(node,
+ "tx-fifo-resize");
dwc->dr_mode = of_usb_get_dr_mode(node);
dwc->disable_scramble_quirk = of_property_read_bool(node,
"snps,disable_scramble_quirk");
} else if (pdata) {
dwc->maximum_speed = pdata->maximum_speed;
+ dwc->has_lpm_erratum = pdata->has_lpm_erratum;
+ if (pdata->lpm_nyet_threshold)
+ lpm_nyet_threshold = pdata->lpm_nyet_threshold;
dwc->needs_fifo_resize = pdata->tx_fifo_resize;
dwc->dr_mode = pdata->dr_mode;
@@ -733,6 +745,8 @@
if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
dwc->maximum_speed = USB_SPEED_SUPER;
+ dwc->lpm_nyet_threshold = lpm_nyet_threshold;
+
ret = dwc3_core_get_phy(dwc);
if (ret)
return ret;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 56bada6..34f1e08 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -246,16 +246,19 @@
#define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6))
/* These apply for core versions 1.94a and later */
-#define DWC3_DCTL_KEEP_CONNECT (1 << 19)
-#define DWC3_DCTL_L1_HIBER_EN (1 << 18)
-#define DWC3_DCTL_CRS (1 << 17)
-#define DWC3_DCTL_CSS (1 << 16)
+#define DWC3_DCTL_LPM_ERRATA_MASK DWC3_DCTL_LPM_ERRATA(0xf)
+#define DWC3_DCTL_LPM_ERRATA(n) ((n) << 20)
-#define DWC3_DCTL_INITU2ENA (1 << 12)
-#define DWC3_DCTL_ACCEPTU2ENA (1 << 11)
-#define DWC3_DCTL_INITU1ENA (1 << 10)
-#define DWC3_DCTL_ACCEPTU1ENA (1 << 9)
-#define DWC3_DCTL_TSTCTRL_MASK (0xf << 1)
+#define DWC3_DCTL_KEEP_CONNECT (1 << 19)
+#define DWC3_DCTL_L1_HIBER_EN (1 << 18)
+#define DWC3_DCTL_CRS (1 << 17)
+#define DWC3_DCTL_CSS (1 << 16)
+
+#define DWC3_DCTL_INITU2ENA (1 << 12)
+#define DWC3_DCTL_ACCEPTU2ENA (1 << 11)
+#define DWC3_DCTL_INITU1ENA (1 << 10)
+#define DWC3_DCTL_ACCEPTU1ENA (1 << 9)
+#define DWC3_DCTL_TSTCTRL_MASK (0xf << 1)
#define DWC3_DCTL_ULSTCHNGREQ_MASK (0x0f << 5)
#define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK)
@@ -660,10 +663,13 @@
* @regset: debugfs pointer to regdump file
* @test_mode: true when we're entering a USB test mode
* @test_mode_nr: test feature selector
+ * @lpm_nyet_threshold: LPM NYET response threshold
* @delayed_status: true when gadget driver asks for delayed status
* @ep0_bounced: true when we used bounce buffer
* @ep0_expect_in: true when we expect a DATA IN transfer
* @has_hibernation: true when dwc3 was configured with Hibernation
+ * @has_lpm_erratum: true when core was configured with LPM Erratum. Note that
+ * there's now way for software to detect this in runtime.
* @is_selfpowered: true when we are selfpowered
* @is_fpga: true when we are using the FPGA board
* @needs_fifo_resize: not all users might want fifo resizing, flag it
@@ -764,11 +770,13 @@
u8 test_mode;
u8 test_mode_nr;
+ u8 lpm_nyet_threshold;
unsigned delayed_status:1;
unsigned ep0_bounced:1;
unsigned ep0_expect_in:1;
unsigned has_hibernation:1;
+ unsigned has_lpm_erratum:1;
unsigned is_selfpowered:1;
unsigned is_fpga:1;
unsigned needs_fifo_resize:1;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 20dda60..88a065f 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2301,6 +2301,19 @@
*/
reg |= DWC3_DCTL_HIRD_THRES(12);
+ /*
+ * When dwc3 revisions >= 2.40a, LPM Erratum is enabled and
+ * DCFG.LPMCap is set, core responses with an ACK and the
+ * BESL value in the LPM token is less than or equal to LPM
+ * NYET threshold.
+ */
+ WARN_ONCE(dwc->revision < DWC3_REVISION_240A
+ && dwc->has_lpm_erratum,
+ "LPM Erratum not available on dwc3 revisisions < 2.40a\n");
+
+ if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A)
+ reg |= DWC3_DCTL_LPM_ERRATA(dwc->lpm_nyet_threshold);
+
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
} else {
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index 9209d02..e128308 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -25,5 +25,8 @@
enum usb_dr_mode dr_mode;
bool tx_fifo_resize;
+ u8 lpm_nyet_threshold;
+
unsigned disable_scramble_quirk:1;
+ unsigned has_lpm_erratum:1;
};