| /* |
| * sysctl.c: General linux system control interface |
| * |
| * Begun 24 March 1995, Stephen Tweedie |
| * Added /proc support, Dec 1995 |
| * Added bdflush entry and intvec min/max checking, 2/23/96, Tom Dyas. |
| * Added hooks for /proc/sys/net (minor, minor patch), 96/4/1, Mike Shaver. |
| * Added kernel/java-{interpreter,appletviewer}, 96/5/10, Mike Shaver. |
| * Dynamic registration fixes, Stephen Tweedie. |
| * Added kswapd-interval, ctrl-alt-del, printk stuff, 1/8/97, Chris Horn. |
| * Made sysctl support optional via CONFIG_SYSCTL, 1/10/97, Chris |
| * Horn. |
| * Added proc_doulongvec_ms_jiffies_minmax, 09/08/99, Carlos H. Bauer. |
| * Added proc_doulongvec_minmax, 09/08/99, Carlos H. Bauer. |
| * Changed linked lists to use list.h instead of lists.h, 02/24/00, Bill |
| * Wendling. |
| * The list_for_each() macro wasn't appropriate for the sysctl loop. |
| * Removed it and replaced it with older style, 03/23/00, Bill Wendling |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/mm.h> |
| #include <linux/swap.h> |
| #include <linux/slab.h> |
| #include <linux/sysctl.h> |
| #include <linux/proc_fs.h> |
| #include <linux/ctype.h> |
| #include <linux/utsname.h> |
| #include <linux/capability.h> |
| #include <linux/smp_lock.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/sysrq.h> |
| #include <linux/highuid.h> |
| #include <linux/writeback.h> |
| #include <linux/hugetlb.h> |
| #include <linux/security.h> |
| #include <linux/initrd.h> |
| #include <linux/times.h> |
| #include <linux/limits.h> |
| #include <linux/dcache.h> |
| #include <linux/syscalls.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/processor.h> |
| |
| #ifdef CONFIG_ROOT_NFS |
| #include <linux/nfs_fs.h> |
| #endif |
| |
| #if defined(CONFIG_SYSCTL) |
| |
| /* External variables not in a header file. */ |
| extern int C_A_D; |
| extern int sysctl_overcommit_memory; |
| extern int sysctl_overcommit_ratio; |
| extern int max_threads; |
| extern int sysrq_enabled; |
| extern int core_uses_pid; |
| extern int suid_dumpable; |
| extern char core_pattern[]; |
| extern int cad_pid; |
| extern int pid_max; |
| extern int min_free_kbytes; |
| extern int printk_ratelimit_jiffies; |
| extern int printk_ratelimit_burst; |
| extern int pid_max_min, pid_max_max; |
| |
| #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86) |
| int unknown_nmi_panic; |
| extern int proc_unknown_nmi_panic(ctl_table *, int, struct file *, |
| void __user *, size_t *, loff_t *); |
| #endif |
| |
| /* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */ |
| static int maxolduid = 65535; |
| static int minolduid; |
| |
| static int ngroups_max = NGROUPS_MAX; |
| |
| #ifdef CONFIG_KMOD |
| extern char modprobe_path[]; |
| #endif |
| #ifdef CONFIG_HOTPLUG |
| extern char hotplug_path[]; |
| #endif |
| #ifdef CONFIG_CHR_DEV_SG |
| extern int sg_big_buff; |
| #endif |
| #ifdef CONFIG_SYSVIPC |
| extern size_t shm_ctlmax; |
| extern size_t shm_ctlall; |
| extern int shm_ctlmni; |
| extern int msg_ctlmax; |
| extern int msg_ctlmnb; |
| extern int msg_ctlmni; |
| extern int sem_ctls[]; |
| #endif |
| |
| #ifdef __sparc__ |
| extern char reboot_command []; |
| extern int stop_a_enabled; |
| extern int scons_pwroff; |
| #endif |
| |
| #ifdef __hppa__ |
| extern int pwrsw_enabled; |
| extern int unaligned_enabled; |
| #endif |
| |
| #ifdef CONFIG_ARCH_S390 |
| #ifdef CONFIG_MATHEMU |
| extern int sysctl_ieee_emulation_warnings; |
| #endif |
| extern int sysctl_userprocess_debug; |
| #endif |
| |
| extern int sysctl_hz_timer; |
| |
| #ifdef CONFIG_BSD_PROCESS_ACCT |
| extern int acct_parm[]; |
| #endif |
| |
| int randomize_va_space = 1; |
| |
| static int parse_table(int __user *, int, void __user *, size_t __user *, void __user *, size_t, |
| ctl_table *, void **); |
| static int proc_doutsstring(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos); |
| |
| static ctl_table root_table[]; |
| static struct ctl_table_header root_table_header = |
| { root_table, LIST_HEAD_INIT(root_table_header.ctl_entry) }; |
| |
| static ctl_table kern_table[]; |
| static ctl_table vm_table[]; |
| #ifdef CONFIG_NET |
| extern ctl_table net_table[]; |
| #endif |
| static ctl_table proc_table[]; |
| static ctl_table fs_table[]; |
| static ctl_table debug_table[]; |
| static ctl_table dev_table[]; |
| extern ctl_table random_table[]; |
| #ifdef CONFIG_UNIX98_PTYS |
| extern ctl_table pty_table[]; |
| #endif |
| |
| #ifdef HAVE_ARCH_PICK_MMAP_LAYOUT |
| int sysctl_legacy_va_layout; |
| #endif |
| |
| /* /proc declarations: */ |
| |
| #ifdef CONFIG_PROC_FS |
| |
| static ssize_t proc_readsys(struct file *, char __user *, size_t, loff_t *); |
| static ssize_t proc_writesys(struct file *, const char __user *, size_t, loff_t *); |
| static int proc_opensys(struct inode *, struct file *); |
| |
| struct file_operations proc_sys_file_operations = { |
| .open = proc_opensys, |
| .read = proc_readsys, |
| .write = proc_writesys, |
| }; |
| |
| extern struct proc_dir_entry *proc_sys_root; |
| |
| static void register_proc_table(ctl_table *, struct proc_dir_entry *); |
| static void unregister_proc_table(ctl_table *, struct proc_dir_entry *); |
| #endif |
| |
| /* The default sysctl tables: */ |
| |
| static ctl_table root_table[] = { |
| { |
| .ctl_name = CTL_KERN, |
| .procname = "kernel", |
| .mode = 0555, |
| .child = kern_table, |
| }, |
| { |
| .ctl_name = CTL_VM, |
| .procname = "vm", |
| .mode = 0555, |
| .child = vm_table, |
| }, |
| #ifdef CONFIG_NET |
| { |
| .ctl_name = CTL_NET, |
| .procname = "net", |
| .mode = 0555, |
| .child = net_table, |
| }, |
| #endif |
| { |
| .ctl_name = CTL_PROC, |
| .procname = "proc", |
| .mode = 0555, |
| .child = proc_table, |
| }, |
| { |
| .ctl_name = CTL_FS, |
| .procname = "fs", |
| .mode = 0555, |
| .child = fs_table, |
| }, |
| { |
| .ctl_name = CTL_DEBUG, |
| .procname = "debug", |
| .mode = 0555, |
| .child = debug_table, |
| }, |
| { |
| .ctl_name = CTL_DEV, |
| .procname = "dev", |
| .mode = 0555, |
| .child = dev_table, |
| }, |
| { .ctl_name = 0 } |
| }; |
| |
| static ctl_table kern_table[] = { |
| { |
| .ctl_name = KERN_OSTYPE, |
| .procname = "ostype", |
| .data = system_utsname.sysname, |
| .maxlen = sizeof(system_utsname.sysname), |
| .mode = 0444, |
| .proc_handler = &proc_doutsstring, |
| .strategy = &sysctl_string, |
| }, |
| { |
| .ctl_name = KERN_OSRELEASE, |
| .procname = "osrelease", |
| .data = system_utsname.release, |
| .maxlen = sizeof(system_utsname.release), |
| .mode = 0444, |
| .proc_handler = &proc_doutsstring, |
| .strategy = &sysctl_string, |
| }, |
| { |
| .ctl_name = KERN_VERSION, |
| .procname = "version", |
| .data = system_utsname.version, |
| .maxlen = sizeof(system_utsname.version), |
| .mode = 0444, |
| .proc_handler = &proc_doutsstring, |
| .strategy = &sysctl_string, |
| }, |
| { |
| .ctl_name = KERN_NODENAME, |
| .procname = "hostname", |
| .data = system_utsname.nodename, |
| .maxlen = sizeof(system_utsname.nodename), |
| .mode = 0644, |
| .proc_handler = &proc_doutsstring, |
| .strategy = &sysctl_string, |
| }, |
| { |
| .ctl_name = KERN_DOMAINNAME, |
| .procname = "domainname", |
| .data = system_utsname.domainname, |
| .maxlen = sizeof(system_utsname.domainname), |
| .mode = 0644, |
| .proc_handler = &proc_doutsstring, |
| .strategy = &sysctl_string, |
| }, |
| { |
| .ctl_name = KERN_PANIC, |
| .procname = "panic", |
| .data = &panic_timeout, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = KERN_CORE_USES_PID, |
| .procname = "core_uses_pid", |
| .data = &core_uses_pid, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = KERN_CORE_PATTERN, |
| .procname = "core_pattern", |
| .data = core_pattern, |
| .maxlen = 64, |
| .mode = 0644, |
| .proc_handler = &proc_dostring, |
| .strategy = &sysctl_string, |
| }, |
| { |
| .ctl_name = KERN_TAINTED, |
| .procname = "tainted", |
| .data = &tainted, |
| .maxlen = sizeof(int), |
| .mode = 0444, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = KERN_CAP_BSET, |
| .procname = "cap-bound", |
| .data = &cap_bset, |
| .maxlen = sizeof(kernel_cap_t), |
| .mode = 0600, |
| .proc_handler = &proc_dointvec_bset, |
| }, |
| #ifdef CONFIG_BLK_DEV_INITRD |
| { |
| .ctl_name = KERN_REALROOTDEV, |
| .procname = "real-root-dev", |
| .data = &real_root_dev, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| #endif |
| #ifdef __sparc__ |
| { |
| .ctl_name = KERN_SPARC_REBOOT, |
| .procname = "reboot-cmd", |
| .data = reboot_command, |
| .maxlen = 256, |
| .mode = 0644, |
| .proc_handler = &proc_dostring, |
| .strategy = &sysctl_string, |
| }, |
| { |
| .ctl_name = KERN_SPARC_STOP_A, |
| .procname = "stop-a", |
| .data = &stop_a_enabled, |
| .maxlen = sizeof (int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = KERN_SPARC_SCONS_PWROFF, |
| .procname = "scons-poweroff", |
| .data = &scons_pwroff, |
| .maxlen = sizeof (int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| #endif |
| #ifdef __hppa__ |
| { |
| .ctl_name = KERN_HPPA_PWRSW, |
| .procname = "soft-power", |
| .data = &pwrsw_enabled, |
| .maxlen = sizeof (int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = KERN_HPPA_UNALIGNED, |
| .procname = "unaligned-trap", |
| .data = &unaligned_enabled, |
| .maxlen = sizeof (int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| #endif |
| { |
| .ctl_name = KERN_CTLALTDEL, |
| .procname = "ctrl-alt-del", |
| .data = &C_A_D, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = KERN_PRINTK, |
| .procname = "printk", |
| .data = &console_loglevel, |
| .maxlen = 4*sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| #ifdef CONFIG_KMOD |
| { |
| .ctl_name = KERN_MODPROBE, |
| .procname = "modprobe", |
| .data = &modprobe_path, |
| .maxlen = KMOD_PATH_LEN, |
| .mode = 0644, |
| .proc_handler = &proc_dostring, |
| .strategy = &sysctl_string, |
| }, |
| #endif |
| #ifdef CONFIG_HOTPLUG |
| { |
| .ctl_name = KERN_HOTPLUG, |
| .procname = "hotplug", |
| .data = &hotplug_path, |
| .maxlen = HOTPLUG_PATH_LEN, |
| .mode = 0644, |
| .proc_handler = &proc_dostring, |
| .strategy = &sysctl_string, |
| }, |
| #endif |
| #ifdef CONFIG_CHR_DEV_SG |
| { |
| .ctl_name = KERN_SG_BIG_BUFF, |
| .procname = "sg-big-buff", |
| .data = &sg_big_buff, |
| .maxlen = sizeof (int), |
| .mode = 0444, |
| .proc_handler = &proc_dointvec, |
| }, |
| #endif |
| #ifdef CONFIG_BSD_PROCESS_ACCT |
| { |
| .ctl_name = KERN_ACCT, |
| .procname = "acct", |
| .data = &acct_parm, |
| .maxlen = 3*sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| #endif |
| #ifdef CONFIG_SYSVIPC |
| { |
| .ctl_name = KERN_SHMMAX, |
| .procname = "shmmax", |
| .data = &shm_ctlmax, |
| .maxlen = sizeof (size_t), |
| .mode = 0644, |
| .proc_handler = &proc_doulongvec_minmax, |
| }, |
| { |
| .ctl_name = KERN_SHMALL, |
| .procname = "shmall", |
| .data = &shm_ctlall, |
| .maxlen = sizeof (size_t), |
| .mode = 0644, |
| .proc_handler = &proc_doulongvec_minmax, |
| }, |
| { |
| .ctl_name = KERN_SHMMNI, |
| .procname = "shmmni", |
| .data = &shm_ctlmni, |
| .maxlen = sizeof (int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = KERN_MSGMAX, |
| .procname = "msgmax", |
| .data = &msg_ctlmax, |
| .maxlen = sizeof (int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = KERN_MSGMNI, |
| .procname = "msgmni", |
| .data = &msg_ctlmni, |
| .maxlen = sizeof (int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = KERN_MSGMNB, |
| .procname = "msgmnb", |
| .data = &msg_ctlmnb, |
| .maxlen = sizeof (int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = KERN_SEM, |
| .procname = "sem", |
| .data = &sem_ctls, |
| .maxlen = 4*sizeof (int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| #endif |
| #ifdef CONFIG_MAGIC_SYSRQ |
| { |
| .ctl_name = KERN_SYSRQ, |
| .procname = "sysrq", |
| .data = &sysrq_enabled, |
| .maxlen = sizeof (int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| #endif |
| { |
| .ctl_name = KERN_CADPID, |
| .procname = "cad_pid", |
| .data = &cad_pid, |
| .maxlen = sizeof (int), |
| .mode = 0600, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = KERN_MAX_THREADS, |
| .procname = "threads-max", |
| .data = &max_threads, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = KERN_RANDOM, |
| .procname = "random", |
| .mode = 0555, |
| .child = random_table, |
| }, |
| #ifdef CONFIG_UNIX98_PTYS |
| { |
| .ctl_name = KERN_PTY, |
| .procname = "pty", |
| .mode = 0555, |
| .child = pty_table, |
| }, |
| #endif |
| { |
| .ctl_name = KERN_OVERFLOWUID, |
| .procname = "overflowuid", |
| .data = &overflowuid, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec_minmax, |
| .strategy = &sysctl_intvec, |
| .extra1 = &minolduid, |
| .extra2 = &maxolduid, |
| }, |
| { |
| .ctl_name = KERN_OVERFLOWGID, |
| .procname = "overflowgid", |
| .data = &overflowgid, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec_minmax, |
| .strategy = &sysctl_intvec, |
| .extra1 = &minolduid, |
| .extra2 = &maxolduid, |
| }, |
| #ifdef CONFIG_ARCH_S390 |
| #ifdef CONFIG_MATHEMU |
| { |
| .ctl_name = KERN_IEEE_EMULATION_WARNINGS, |
| .procname = "ieee_emulation_warnings", |
| .data = &sysctl_ieee_emulation_warnings, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| #endif |
| #ifdef CONFIG_NO_IDLE_HZ |
| { |
| .ctl_name = KERN_HZ_TIMER, |
| .procname = "hz_timer", |
| .data = &sysctl_hz_timer, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| #endif |
| { |
| .ctl_name = KERN_S390_USER_DEBUG_LOGGING, |
| .procname = "userprocess_debug", |
| .data = &sysctl_userprocess_debug, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| #endif |
| { |
| .ctl_name = KERN_PIDMAX, |
| .procname = "pid_max", |
| .data = &pid_max, |
| .maxlen = sizeof (int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec_minmax, |
| .strategy = sysctl_intvec, |
| .extra1 = &pid_max_min, |
| .extra2 = &pid_max_max, |
| }, |
| { |
| .ctl_name = KERN_PANIC_ON_OOPS, |
| .procname = "panic_on_oops", |
| .data = &panic_on_oops, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = KERN_PRINTK_RATELIMIT, |
| .procname = "printk_ratelimit", |
| .data = &printk_ratelimit_jiffies, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec_jiffies, |
| .strategy = &sysctl_jiffies, |
| }, |
| { |
| .ctl_name = KERN_PRINTK_RATELIMIT_BURST, |
| .procname = "printk_ratelimit_burst", |
| .data = &printk_ratelimit_burst, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = KERN_NGROUPS_MAX, |
| .procname = "ngroups_max", |
| .data = &ngroups_max, |
| .maxlen = sizeof (int), |
| .mode = 0444, |
| .proc_handler = &proc_dointvec, |
| }, |
| #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86) |
| { |
| .ctl_name = KERN_UNKNOWN_NMI_PANIC, |
| .procname = "unknown_nmi_panic", |
| .data = &unknown_nmi_panic, |
| .maxlen = sizeof (int), |
| .mode = 0644, |
| .proc_handler = &proc_unknown_nmi_panic, |
| }, |
| #endif |
| #if defined(CONFIG_X86) |
| { |
| .ctl_name = KERN_BOOTLOADER_TYPE, |
| .procname = "bootloader_type", |
| .data = &bootloader_type, |
| .maxlen = sizeof (int), |
| .mode = 0444, |
| .proc_handler = &proc_dointvec, |
| }, |
| #endif |
| { |
| .ctl_name = KERN_RANDOMIZE, |
| .procname = "randomize_va_space", |
| .data = &randomize_va_space, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| |
| { .ctl_name = 0 } |
| }; |
| |
| /* Constants for minimum and maximum testing in vm_table. |
| We use these as one-element integer vectors. */ |
| static int zero; |
| static int one_hundred = 100; |
| |
| |
| static ctl_table vm_table[] = { |
| { |
| .ctl_name = VM_OVERCOMMIT_MEMORY, |
| .procname = "overcommit_memory", |
| .data = &sysctl_overcommit_memory, |
| .maxlen = sizeof(sysctl_overcommit_memory), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = VM_OVERCOMMIT_RATIO, |
| .procname = "overcommit_ratio", |
| .data = &sysctl_overcommit_ratio, |
| .maxlen = sizeof(sysctl_overcommit_ratio), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = VM_PAGE_CLUSTER, |
| .procname = "page-cluster", |
| .data = &page_cluster, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = VM_DIRTY_BACKGROUND, |
| .procname = "dirty_background_ratio", |
| .data = &dirty_background_ratio, |
| .maxlen = sizeof(dirty_background_ratio), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec_minmax, |
| .strategy = &sysctl_intvec, |
| .extra1 = &zero, |
| .extra2 = &one_hundred, |
| }, |
| { |
| .ctl_name = VM_DIRTY_RATIO, |
| .procname = "dirty_ratio", |
| .data = &vm_dirty_ratio, |
| .maxlen = sizeof(vm_dirty_ratio), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec_minmax, |
| .strategy = &sysctl_intvec, |
| .extra1 = &zero, |
| .extra2 = &one_hundred, |
| }, |
| { |
| .ctl_name = VM_DIRTY_WB_CS, |
| .procname = "dirty_writeback_centisecs", |
| .data = &dirty_writeback_centisecs, |
| .maxlen = sizeof(dirty_writeback_centisecs), |
| .mode = 0644, |
| .proc_handler = &dirty_writeback_centisecs_handler, |
| }, |
| { |
| .ctl_name = VM_DIRTY_EXPIRE_CS, |
| .procname = "dirty_expire_centisecs", |
| .data = &dirty_expire_centisecs, |
| .maxlen = sizeof(dirty_expire_centisecs), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = VM_NR_PDFLUSH_THREADS, |
| .procname = "nr_pdflush_threads", |
| .data = &nr_pdflush_threads, |
| .maxlen = sizeof nr_pdflush_threads, |
| .mode = 0444 /* read-only*/, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = VM_SWAPPINESS, |
| .procname = "swappiness", |
| .data = &vm_swappiness, |
| .maxlen = sizeof(vm_swappiness), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec_minmax, |
| .strategy = &sysctl_intvec, |
| .extra1 = &zero, |
| .extra2 = &one_hundred, |
| }, |
| #ifdef CONFIG_HUGETLB_PAGE |
| { |
| .ctl_name = VM_HUGETLB_PAGES, |
| .procname = "nr_hugepages", |
| .data = &max_huge_pages, |
| .maxlen = sizeof(unsigned long), |
| .mode = 0644, |
| .proc_handler = &hugetlb_sysctl_handler, |
| .extra1 = (void *)&hugetlb_zero, |
| .extra2 = (void *)&hugetlb_infinity, |
| }, |
| { |
| .ctl_name = VM_HUGETLB_GROUP, |
| .procname = "hugetlb_shm_group", |
| .data = &sysctl_hugetlb_shm_group, |
| .maxlen = sizeof(gid_t), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| #endif |
| { |
| .ctl_name = VM_LOWMEM_RESERVE_RATIO, |
| .procname = "lowmem_reserve_ratio", |
| .data = &sysctl_lowmem_reserve_ratio, |
| .maxlen = sizeof(sysctl_lowmem_reserve_ratio), |
| .mode = 0644, |
| .proc_handler = &lowmem_reserve_ratio_sysctl_handler, |
| .strategy = &sysctl_intvec, |
| }, |
| { |
| .ctl_name = VM_MIN_FREE_KBYTES, |
| .procname = "min_free_kbytes", |
| .data = &min_free_kbytes, |
| .maxlen = sizeof(min_free_kbytes), |
| .mode = 0644, |
| .proc_handler = &min_free_kbytes_sysctl_handler, |
| .strategy = &sysctl_intvec, |
| .extra1 = &zero, |
| }, |
| #ifdef CONFIG_MMU |
| { |
| .ctl_name = VM_MAX_MAP_COUNT, |
| .procname = "max_map_count", |
| .data = &sysctl_max_map_count, |
| .maxlen = sizeof(sysctl_max_map_count), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec |
| }, |
| #endif |
| { |
| .ctl_name = VM_LAPTOP_MODE, |
| .procname = "laptop_mode", |
| .data = &laptop_mode, |
| .maxlen = sizeof(laptop_mode), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| .strategy = &sysctl_intvec, |
| .extra1 = &zero, |
| }, |
| { |
| .ctl_name = VM_BLOCK_DUMP, |
| .procname = "block_dump", |
| .data = &block_dump, |
| .maxlen = sizeof(block_dump), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| .strategy = &sysctl_intvec, |
| .extra1 = &zero, |
| }, |
| { |
| .ctl_name = VM_VFS_CACHE_PRESSURE, |
| .procname = "vfs_cache_pressure", |
| .data = &sysctl_vfs_cache_pressure, |
| .maxlen = sizeof(sysctl_vfs_cache_pressure), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| .strategy = &sysctl_intvec, |
| .extra1 = &zero, |
| }, |
| #ifdef HAVE_ARCH_PICK_MMAP_LAYOUT |
| { |
| .ctl_name = VM_LEGACY_VA_LAYOUT, |
| .procname = "legacy_va_layout", |
| .data = &sysctl_legacy_va_layout, |
| .maxlen = sizeof(sysctl_legacy_va_layout), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| .strategy = &sysctl_intvec, |
| .extra1 = &zero, |
| }, |
| #endif |
| #ifdef CONFIG_SWAP |
| { |
| .ctl_name = VM_SWAP_TOKEN_TIMEOUT, |
| .procname = "swap_token_timeout", |
| .data = &swap_token_default_timeout, |
| .maxlen = sizeof(swap_token_default_timeout), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec_jiffies, |
| .strategy = &sysctl_jiffies, |
| }, |
| #endif |
| { .ctl_name = 0 } |
| }; |
| |
| static ctl_table proc_table[] = { |
| { .ctl_name = 0 } |
| }; |
| |
| static ctl_table fs_table[] = { |
| { |
| .ctl_name = FS_NRINODE, |
| .procname = "inode-nr", |
| .data = &inodes_stat, |
| .maxlen = 2*sizeof(int), |
| .mode = 0444, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = FS_STATINODE, |
| .procname = "inode-state", |
| .data = &inodes_stat, |
| .maxlen = 7*sizeof(int), |
| .mode = 0444, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = FS_NRFILE, |
| .procname = "file-nr", |
| .data = &files_stat, |
| .maxlen = 3*sizeof(int), |
| .mode = 0444, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = FS_MAXFILE, |
| .procname = "file-max", |
| .data = &files_stat.max_files, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = FS_DENTRY, |
| .procname = "dentry-state", |
| .data = &dentry_stat, |
| .maxlen = 6*sizeof(int), |
| .mode = 0444, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = FS_OVERFLOWUID, |
| .procname = "overflowuid", |
| .data = &fs_overflowuid, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec_minmax, |
| .strategy = &sysctl_intvec, |
| .extra1 = &minolduid, |
| .extra2 = &maxolduid, |
| }, |
| { |
| .ctl_name = FS_OVERFLOWGID, |
| .procname = "overflowgid", |
| .data = &fs_overflowgid, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec_minmax, |
| .strategy = &sysctl_intvec, |
| .extra1 = &minolduid, |
| .extra2 = &maxolduid, |
| }, |
| { |
| .ctl_name = FS_LEASES, |
| .procname = "leases-enable", |
| .data = &leases_enable, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| #ifdef CONFIG_DNOTIFY |
| { |
| .ctl_name = FS_DIR_NOTIFY, |
| .procname = "dir-notify-enable", |
| .data = &dir_notify_enable, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| #endif |
| #ifdef CONFIG_MMU |
| { |
| .ctl_name = FS_LEASE_TIME, |
| .procname = "lease-break-time", |
| .data = &lease_break_time, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = FS_AIO_NR, |
| .procname = "aio-nr", |
| .data = &aio_nr, |
| .maxlen = sizeof(aio_nr), |
| .mode = 0444, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = FS_AIO_MAX_NR, |
| .procname = "aio-max-nr", |
| .data = &aio_max_nr, |
| .maxlen = sizeof(aio_max_nr), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| #endif |
| { |
| .ctl_name = KERN_SETUID_DUMPABLE, |
| .procname = "suid_dumpable", |
| .data = &suid_dumpable, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { .ctl_name = 0 } |
| }; |
| |
| static ctl_table debug_table[] = { |
| { .ctl_name = 0 } |
| }; |
| |
| static ctl_table dev_table[] = { |
| { .ctl_name = 0 } |
| }; |
| |
| extern void init_irq_proc (void); |
| |
| void __init sysctl_init(void) |
| { |
| #ifdef CONFIG_PROC_FS |
| register_proc_table(root_table, proc_sys_root); |
| init_irq_proc(); |
| #endif |
| } |
| |
| int do_sysctl(int __user *name, int nlen, void __user *oldval, size_t __user *oldlenp, |
| void __user *newval, size_t newlen) |
| { |
| struct list_head *tmp; |
| |
| if (nlen <= 0 || nlen >= CTL_MAXNAME) |
| return -ENOTDIR; |
| if (oldval) { |
| int old_len; |
| if (!oldlenp || get_user(old_len, oldlenp)) |
| return -EFAULT; |
| } |
| tmp = &root_table_header.ctl_entry; |
| do { |
| struct ctl_table_header *head = |
| list_entry(tmp, struct ctl_table_header, ctl_entry); |
| void *context = NULL; |
| int error = parse_table(name, nlen, oldval, oldlenp, |
| newval, newlen, head->ctl_table, |
| &context); |
| kfree(context); |
| if (error != -ENOTDIR) |
| return error; |
| tmp = tmp->next; |
| } while (tmp != &root_table_header.ctl_entry); |
| return -ENOTDIR; |
| } |
| |
| asmlinkage long sys_sysctl(struct __sysctl_args __user *args) |
| { |
| struct __sysctl_args tmp; |
| int error; |
| |
| if (copy_from_user(&tmp, args, sizeof(tmp))) |
| return -EFAULT; |
| |
| lock_kernel(); |
| error = do_sysctl(tmp.name, tmp.nlen, tmp.oldval, tmp.oldlenp, |
| tmp.newval, tmp.newlen); |
| unlock_kernel(); |
| return error; |
| } |
| |
| /* |
| * ctl_perm does NOT grant the superuser all rights automatically, because |
| * some sysctl variables are readonly even to root. |
| */ |
| |
| static int test_perm(int mode, int op) |
| { |
| if (!current->euid) |
| mode >>= 6; |
| else if (in_egroup_p(0)) |
| mode >>= 3; |
| if ((mode & op & 0007) == op) |
| return 0; |
| return -EACCES; |
| } |
| |
| static inline int ctl_perm(ctl_table *table, int op) |
| { |
| int error; |
| error = security_sysctl(table, op); |
| if (error) |
| return error; |
| return test_perm(table->mode, op); |
| } |
| |
| static int parse_table(int __user *name, int nlen, |
| void __user *oldval, size_t __user *oldlenp, |
| void __user *newval, size_t newlen, |
| ctl_table *table, void **context) |
| { |
| int n; |
| repeat: |
| if (!nlen) |
| return -ENOTDIR; |
| if (get_user(n, name)) |
| return -EFAULT; |
| for ( ; table->ctl_name; table++) { |
| if (n == table->ctl_name || table->ctl_name == CTL_ANY) { |
| int error; |
| if (table->child) { |
| if (ctl_perm(table, 001)) |
| return -EPERM; |
| if (table->strategy) { |
| error = table->strategy( |
| table, name, nlen, |
| oldval, oldlenp, |
| newval, newlen, context); |
| if (error) |
| return error; |
| } |
| name++; |
| nlen--; |
| table = table->child; |
| goto repeat; |
| } |
| error = do_sysctl_strategy(table, name, nlen, |
| oldval, oldlenp, |
| newval, newlen, context); |
| return error; |
| } |
| } |
| return -ENOTDIR; |
| } |
| |
| /* Perform the actual read/write of a sysctl table entry. */ |
| int do_sysctl_strategy (ctl_table *table, |
| int __user *name, int nlen, |
| void __user *oldval, size_t __user *oldlenp, |
| void __user *newval, size_t newlen, void **context) |
| { |
| int op = 0, rc; |
| size_t len; |
| |
| if (oldval) |
| op |= 004; |
| if (newval) |
| op |= 002; |
| if (ctl_perm(table, op)) |
| return -EPERM; |
| |
| if (table->strategy) { |
| rc = table->strategy(table, name, nlen, oldval, oldlenp, |
| newval, newlen, context); |
| if (rc < 0) |
| return rc; |
| if (rc > 0) |
| return 0; |
| } |
| |
| /* If there is no strategy routine, or if the strategy returns |
| * zero, proceed with automatic r/w */ |
| if (table->data && table->maxlen) { |
| if (oldval && oldlenp) { |
| if (get_user(len, oldlenp)) |
| return -EFAULT; |
| if (len) { |
| if (len > table->maxlen) |
| len = table->maxlen; |
| if(copy_to_user(oldval, table->data, len)) |
| return -EFAULT; |
| if(put_user(len, oldlenp)) |
| return -EFAULT; |
| } |
| } |
| if (newval && newlen) { |
| len = newlen; |
| if (len > table->maxlen) |
| len = table->maxlen; |
| if(copy_from_user(table->data, newval, len)) |
| return -EFAULT; |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * register_sysctl_table - register a sysctl hierarchy |
| * @table: the top-level table structure |
| * @insert_at_head: whether the entry should be inserted in front or at the end |
| * |
| * Register a sysctl table hierarchy. @table should be a filled in ctl_table |
| * array. An entry with a ctl_name of 0 terminates the table. |
| * |
| * The members of the &ctl_table structure are used as follows: |
| * |
| * ctl_name - This is the numeric sysctl value used by sysctl(2). The number |
| * must be unique within that level of sysctl |
| * |
| * procname - the name of the sysctl file under /proc/sys. Set to %NULL to not |
| * enter a sysctl file |
| * |
| * data - a pointer to data for use by proc_handler |
| * |
| * maxlen - the maximum size in bytes of the data |
| * |
| * mode - the file permissions for the /proc/sys file, and for sysctl(2) |
| * |
| * child - a pointer to the child sysctl table if this entry is a directory, or |
| * %NULL. |
| * |
| * proc_handler - the text handler routine (described below) |
| * |
| * strategy - the strategy routine (described below) |
| * |
| * de - for internal use by the sysctl routines |
| * |
| * extra1, extra2 - extra pointers usable by the proc handler routines |
| * |
| * Leaf nodes in the sysctl tree will be represented by a single file |
| * under /proc; non-leaf nodes will be represented by directories. |
| * |
| * sysctl(2) can automatically manage read and write requests through |
| * the sysctl table. The data and maxlen fields of the ctl_table |
| * struct enable minimal validation of the values being written to be |
| * performed, and the mode field allows minimal authentication. |
| * |
| * More sophisticated management can be enabled by the provision of a |
| * strategy routine with the table entry. This will be called before |
| * any automatic read or write of the data is performed. |
| * |
| * The strategy routine may return |
| * |
| * < 0 - Error occurred (error is passed to user process) |
| * |
| * 0 - OK - proceed with automatic read or write. |
| * |
| * > 0 - OK - read or write has been done by the strategy routine, so |
| * return immediately. |
| * |
| * There must be a proc_handler routine for any terminal nodes |
| * mirrored under /proc/sys (non-terminals are handled by a built-in |
| * directory handler). Several default handlers are available to |
| * cover common cases - |
| * |
| * proc_dostring(), proc_dointvec(), proc_dointvec_jiffies(), |
| * proc_dointvec_userhz_jiffies(), proc_dointvec_minmax(), |
| * proc_doulongvec_ms_jiffies_minmax(), proc_doulongvec_minmax() |
| * |
| * It is the handler's job to read the input buffer from user memory |
| * and process it. The handler should return 0 on success. |
| * |
| * This routine returns %NULL on a failure to register, and a pointer |
| * to the table header on success. |
| */ |
| struct ctl_table_header *register_sysctl_table(ctl_table * table, |
| int insert_at_head) |
| { |
| struct ctl_table_header *tmp; |
| tmp = kmalloc(sizeof(struct ctl_table_header), GFP_KERNEL); |
| if (!tmp) |
| return NULL; |
| tmp->ctl_table = table; |
| INIT_LIST_HEAD(&tmp->ctl_entry); |
| if (insert_at_head) |
| list_add(&tmp->ctl_entry, &root_table_header.ctl_entry); |
| else |
| list_add_tail(&tmp->ctl_entry, &root_table_header.ctl_entry); |
| #ifdef CONFIG_PROC_FS |
| register_proc_table(table, proc_sys_root); |
| #endif |
| return tmp; |
| } |
| |
| /** |
| * unregister_sysctl_table - unregister a sysctl table hierarchy |
| * @header: the header returned from register_sysctl_table |
| * |
| * Unregisters the sysctl table and all children. proc entries may not |
| * actually be removed until they are no longer used by anyone. |
| */ |
| void unregister_sysctl_table(struct ctl_table_header * header) |
| { |
| list_del(&header->ctl_entry); |
| #ifdef CONFIG_PROC_FS |
| unregister_proc_table(header->ctl_table, proc_sys_root); |
| #endif |
| kfree(header); |
| } |
| |
| /* |
| * /proc/sys support |
| */ |
| |
| #ifdef CONFIG_PROC_FS |
| |
| /* Scan the sysctl entries in table and add them all into /proc */ |
| static void register_proc_table(ctl_table * table, struct proc_dir_entry *root) |
| { |
| struct proc_dir_entry *de; |
| int len; |
| mode_t mode; |
| |
| for (; table->ctl_name; table++) { |
| /* Can't do anything without a proc name. */ |
| if (!table->procname) |
| continue; |
| /* Maybe we can't do anything with it... */ |
| if (!table->proc_handler && !table->child) { |
| printk(KERN_WARNING "SYSCTL: Can't register %s\n", |
| table->procname); |
| continue; |
| } |
| |
| len = strlen(table->procname); |
| mode = table->mode; |
| |
| de = NULL; |
| if (table->proc_handler) |
| mode |= S_IFREG; |
| else { |
| mode |= S_IFDIR; |
| for (de = root->subdir; de; de = de->next) { |
| if (proc_match(len, table->procname, de)) |
| break; |
| } |
| /* If the subdir exists already, de is non-NULL */ |
| } |
| |
| if (!de) { |
| de = create_proc_entry(table->procname, mode, root); |
| if (!de) |
| continue; |
| de->data = (void *) table; |
| if (table->proc_handler) |
| de->proc_fops = &proc_sys_file_operations; |
| } |
| table->de = de; |
| if (de->mode & S_IFDIR) |
| register_proc_table(table->child, de); |
| } |
| } |
| |
| /* |
| * Unregister a /proc sysctl table and any subdirectories. |
| */ |
| static void unregister_proc_table(ctl_table * table, struct proc_dir_entry *root) |
| { |
| struct proc_dir_entry *de; |
| for (; table->ctl_name; table++) { |
| if (!(de = table->de)) |
| continue; |
| if (de->mode & S_IFDIR) { |
| if (!table->child) { |
| printk (KERN_ALERT "Help - malformed sysctl tree on free\n"); |
| continue; |
| } |
| unregister_proc_table(table->child, de); |
| |
| /* Don't unregister directories which still have entries.. */ |
| if (de->subdir) |
| continue; |
| } |
| |
| /* Don't unregister proc entries that are still being used.. */ |
| if (atomic_read(&de->count)) |
| continue; |
| |
| table->de = NULL; |
| remove_proc_entry(table->procname, root); |
| } |
| } |
| |
| static ssize_t do_rw_proc(int write, struct file * file, char __user * buf, |
| size_t count, loff_t *ppos) |
| { |
| int op; |
| struct proc_dir_entry *de; |
| struct ctl_table *table; |
| size_t res; |
| ssize_t error; |
| |
| de = PDE(file->f_dentry->d_inode); |
| if (!de || !de->data) |
| return -ENOTDIR; |
| table = (struct ctl_table *) de->data; |
| if (!table || !table->proc_handler) |
| return -ENOTDIR; |
| op = (write ? 002 : 004); |
| if (ctl_perm(table, op)) |
| return -EPERM; |
| |
| res = count; |
| |
| error = (*table->proc_handler) (table, write, file, buf, &res, ppos); |
| if (error) |
| return error; |
| return res; |
| } |
| |
| static int proc_opensys(struct inode *inode, struct file *file) |
| { |
| if (file->f_mode & FMODE_WRITE) { |
| /* |
| * sysctl entries that are not writable, |
| * are _NOT_ writable, capabilities or not. |
| */ |
| if (!(inode->i_mode & S_IWUSR)) |
| return -EPERM; |
| } |
| |
| return 0; |
| } |
| |
| static ssize_t proc_readsys(struct file * file, char __user * buf, |
| size_t count, loff_t *ppos) |
| { |
| return do_rw_proc(0, file, buf, count, ppos); |
| } |
| |
| static ssize_t proc_writesys(struct file * file, const char __user * buf, |
| size_t count, loff_t *ppos) |
| { |
| return do_rw_proc(1, file, (char __user *) buf, count, ppos); |
| } |
| |
| /** |
| * proc_dostring - read a string sysctl |
| * @table: the sysctl table |
| * @write: %TRUE if this is a write to the sysctl file |
| * @filp: the file structure |
| * @buffer: the user buffer |
| * @lenp: the size of the user buffer |
| * @ppos: file position |
| * |
| * Reads/writes a string from/to the user buffer. If the kernel |
| * buffer provided is not large enough to hold the string, the |
| * string is truncated. The copied string is %NULL-terminated. |
| * If the string is being read by the user process, it is copied |
| * and a newline '\n' is added. It is truncated if the buffer is |
| * not large enough. |
| * |
| * Returns 0 on success. |
| */ |
| int proc_dostring(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| size_t len; |
| char __user *p; |
| char c; |
| |
| if (!table->data || !table->maxlen || !*lenp || |
| (*ppos && !write)) { |
| *lenp = 0; |
| return 0; |
| } |
| |
| if (write) { |
| len = 0; |
| p = buffer; |
| while (len < *lenp) { |
| if (get_user(c, p++)) |
| return -EFAULT; |
| if (c == 0 || c == '\n') |
| break; |
| len++; |
| } |
| if (len >= table->maxlen) |
| len = table->maxlen-1; |
| if(copy_from_user(table->data, buffer, len)) |
| return -EFAULT; |
| ((char *) table->data)[len] = 0; |
| *ppos += *lenp; |
| } else { |
| len = strlen(table->data); |
| if (len > table->maxlen) |
| len = table->maxlen; |
| if (len > *lenp) |
| len = *lenp; |
| if (len) |
| if(copy_to_user(buffer, table->data, len)) |
| return -EFAULT; |
| if (len < *lenp) { |
| if(put_user('\n', ((char __user *) buffer) + len)) |
| return -EFAULT; |
| len++; |
| } |
| *lenp = len; |
| *ppos += len; |
| } |
| return 0; |
| } |
| |
| /* |
| * Special case of dostring for the UTS structure. This has locks |
| * to observe. Should this be in kernel/sys.c ???? |
| */ |
| |
| static int proc_doutsstring(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int r; |
| |
| if (!write) { |
| down_read(&uts_sem); |
| r=proc_dostring(table,0,filp,buffer,lenp, ppos); |
| up_read(&uts_sem); |
| } else { |
| down_write(&uts_sem); |
| r=proc_dostring(table,1,filp,buffer,lenp, ppos); |
| up_write(&uts_sem); |
| } |
| return r; |
| } |
| |
| static int do_proc_dointvec_conv(int *negp, unsigned long *lvalp, |
| int *valp, |
| int write, void *data) |
| { |
| if (write) { |
| *valp = *negp ? -*lvalp : *lvalp; |
| } else { |
| int val = *valp; |
| if (val < 0) { |
| *negp = -1; |
| *lvalp = (unsigned long)-val; |
| } else { |
| *negp = 0; |
| *lvalp = (unsigned long)val; |
| } |
| } |
| return 0; |
| } |
| |
| static int do_proc_dointvec(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos, |
| int (*conv)(int *negp, unsigned long *lvalp, int *valp, |
| int write, void *data), |
| void *data) |
| { |
| #define TMPBUFLEN 21 |
| int *i, vleft, first=1, neg, val; |
| unsigned long lval; |
| size_t left, len; |
| |
| char buf[TMPBUFLEN], *p; |
| char __user *s = buffer; |
| |
| if (!table->data || !table->maxlen || !*lenp || |
| (*ppos && !write)) { |
| *lenp = 0; |
| return 0; |
| } |
| |
| i = (int *) table->data; |
| vleft = table->maxlen / sizeof(*i); |
| left = *lenp; |
| |
| if (!conv) |
| conv = do_proc_dointvec_conv; |
| |
| for (; left && vleft--; i++, first=0) { |
| if (write) { |
| while (left) { |
| char c; |
| if (get_user(c, s)) |
| return -EFAULT; |
| if (!isspace(c)) |
| break; |
| left--; |
| s++; |
| } |
| if (!left) |
| break; |
| neg = 0; |
| len = left; |
| if (len > sizeof(buf) - 1) |
| len = sizeof(buf) - 1; |
| if (copy_from_user(buf, s, len)) |
| return -EFAULT; |
| buf[len] = 0; |
| p = buf; |
| if (*p == '-' && left > 1) { |
| neg = 1; |
| left--, p++; |
| } |
| if (*p < '0' || *p > '9') |
| break; |
| |
| lval = simple_strtoul(p, &p, 0); |
| |
| len = p-buf; |
| if ((len < left) && *p && !isspace(*p)) |
| break; |
| if (neg) |
| val = -val; |
| s += len; |
| left -= len; |
| |
| if (conv(&neg, &lval, i, 1, data)) |
| break; |
| } else { |
| p = buf; |
| if (!first) |
| *p++ = '\t'; |
| |
| if (conv(&neg, &lval, i, 0, data)) |
| break; |
| |
| sprintf(p, "%s%lu", neg ? "-" : "", lval); |
| len = strlen(buf); |
| if (len > left) |
| len = left; |
| if(copy_to_user(s, buf, len)) |
| return -EFAULT; |
| left -= len; |
| s += len; |
| } |
| } |
| |
| if (!write && !first && left) { |
| if(put_user('\n', s)) |
| return -EFAULT; |
| left--, s++; |
| } |
| if (write) { |
| while (left) { |
| char c; |
| if (get_user(c, s++)) |
| return -EFAULT; |
| if (!isspace(c)) |
| break; |
| left--; |
| } |
| } |
| if (write && first) |
| return -EINVAL; |
| *lenp -= left; |
| *ppos += *lenp; |
| return 0; |
| #undef TMPBUFLEN |
| } |
| |
| /** |
| * proc_dointvec - read a vector of integers |
| * @table: the sysctl table |
| * @write: %TRUE if this is a write to the sysctl file |
| * @filp: the file structure |
| * @buffer: the user buffer |
| * @lenp: the size of the user buffer |
| * @ppos: file position |
| * |
| * Reads/writes up to table->maxlen/sizeof(unsigned int) integer |
| * values from/to the user buffer, treated as an ASCII string. |
| * |
| * Returns 0 on success. |
| */ |
| int proc_dointvec(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return do_proc_dointvec(table,write,filp,buffer,lenp,ppos, |
| NULL,NULL); |
| } |
| |
| #define OP_SET 0 |
| #define OP_AND 1 |
| #define OP_OR 2 |
| #define OP_MAX 3 |
| #define OP_MIN 4 |
| |
| static int do_proc_dointvec_bset_conv(int *negp, unsigned long *lvalp, |
| int *valp, |
| int write, void *data) |
| { |
| int op = *(int *)data; |
| if (write) { |
| int val = *negp ? -*lvalp : *lvalp; |
| switch(op) { |
| case OP_SET: *valp = val; break; |
| case OP_AND: *valp &= val; break; |
| case OP_OR: *valp |= val; break; |
| case OP_MAX: if(*valp < val) |
| *valp = val; |
| break; |
| case OP_MIN: if(*valp > val) |
| *valp = val; |
| break; |
| } |
| } else { |
| int val = *valp; |
| if (val < 0) { |
| *negp = -1; |
| *lvalp = (unsigned long)-val; |
| } else { |
| *negp = 0; |
| *lvalp = (unsigned long)val; |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * init may raise the set. |
| */ |
| |
| int proc_dointvec_bset(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int op; |
| |
| if (!capable(CAP_SYS_MODULE)) { |
| return -EPERM; |
| } |
| |
| op = (current->pid == 1) ? OP_SET : OP_AND; |
| return do_proc_dointvec(table,write,filp,buffer,lenp,ppos, |
| do_proc_dointvec_bset_conv,&op); |
| } |
| |
| struct do_proc_dointvec_minmax_conv_param { |
| int *min; |
| int *max; |
| }; |
| |
| static int do_proc_dointvec_minmax_conv(int *negp, unsigned long *lvalp, |
| int *valp, |
| int write, void *data) |
| { |
| struct do_proc_dointvec_minmax_conv_param *param = data; |
| if (write) { |
| int val = *negp ? -*lvalp : *lvalp; |
| if ((param->min && *param->min > val) || |
| (param->max && *param->max < val)) |
| return -EINVAL; |
| *valp = val; |
| } else { |
| int val = *valp; |
| if (val < 0) { |
| *negp = -1; |
| *lvalp = (unsigned long)-val; |
| } else { |
| *negp = 0; |
| *lvalp = (unsigned long)val; |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * proc_dointvec_minmax - read a vector of integers with min/max values |
| * @table: the sysctl table |
| * @write: %TRUE if this is a write to the sysctl file |
| * @filp: the file structure |
| * @buffer: the user buffer |
| * @lenp: the size of the user buffer |
| * @ppos: file position |
| * |
| * Reads/writes up to table->maxlen/sizeof(unsigned int) integer |
| * values from/to the user buffer, treated as an ASCII string. |
| * |
| * This routine will ensure the values are within the range specified by |
| * table->extra1 (min) and table->extra2 (max). |
| * |
| * Returns 0 on success. |
| */ |
| int proc_dointvec_minmax(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| struct do_proc_dointvec_minmax_conv_param param = { |
| .min = (int *) table->extra1, |
| .max = (int *) table->extra2, |
| }; |
| return do_proc_dointvec(table, write, filp, buffer, lenp, ppos, |
| do_proc_dointvec_minmax_conv, ¶m); |
| } |
| |
| static int do_proc_doulongvec_minmax(ctl_table *table, int write, |
| struct file *filp, |
| void __user *buffer, |
| size_t *lenp, loff_t *ppos, |
| unsigned long convmul, |
| unsigned long convdiv) |
| { |
| #define TMPBUFLEN 21 |
| unsigned long *i, *min, *max, val; |
| int vleft, first=1, neg; |
| size_t len, left; |
| char buf[TMPBUFLEN], *p; |
| char __user *s = buffer; |
| |
| if (!table->data || !table->maxlen || !*lenp || |
| (*ppos && !write)) { |
| *lenp = 0; |
| return 0; |
| } |
| |
| i = (unsigned long *) table->data; |
| min = (unsigned long *) table->extra1; |
| max = (unsigned long *) table->extra2; |
| vleft = table->maxlen / sizeof(unsigned long); |
| left = *lenp; |
| |
| for (; left && vleft--; i++, min++, max++, first=0) { |
| if (write) { |
| while (left) { |
| char c; |
| if (get_user(c, s)) |
| return -EFAULT; |
| if (!isspace(c)) |
| break; |
| left--; |
| s++; |
| } |
| if (!left) |
| break; |
| neg = 0; |
| len = left; |
| if (len > TMPBUFLEN-1) |
| len = TMPBUFLEN-1; |
| if (copy_from_user(buf, s, len)) |
| return -EFAULT; |
| buf[len] = 0; |
| p = buf; |
| if (*p == '-' && left > 1) { |
| neg = 1; |
| left--, p++; |
| } |
| if (*p < '0' || *p > '9') |
| break; |
| val = simple_strtoul(p, &p, 0) * convmul / convdiv ; |
| len = p-buf; |
| if ((len < left) && *p && !isspace(*p)) |
| break; |
| if (neg) |
| val = -val; |
| s += len; |
| left -= len; |
| |
| if(neg) |
| continue; |
| if ((min && val < *min) || (max && val > *max)) |
| continue; |
| *i = val; |
| } else { |
| p = buf; |
| if (!first) |
| *p++ = '\t'; |
| sprintf(p, "%lu", convdiv * (*i) / convmul); |
| len = strlen(buf); |
| if (len > left) |
| len = left; |
| if(copy_to_user(s, buf, len)) |
| return -EFAULT; |
| left -= len; |
| s += len; |
| } |
| } |
| |
| if (!write && !first && left) { |
| if(put_user('\n', s)) |
| return -EFAULT; |
| left--, s++; |
| } |
| if (write) { |
| while (left) { |
| char c; |
| if (get_user(c, s++)) |
| return -EFAULT; |
| if (!isspace(c)) |
| break; |
| left--; |
| } |
| } |
| if (write && first) |
| return -EINVAL; |
| *lenp -= left; |
| *ppos += *lenp; |
| return 0; |
| #undef TMPBUFLEN |
| } |
| |
| /** |
| * proc_doulongvec_minmax - read a vector of long integers with min/max values |
| * @table: the sysctl table |
| * @write: %TRUE if this is a write to the sysctl file |
| * @filp: the file structure |
| * @buffer: the user buffer |
| * @lenp: the size of the user buffer |
| * @ppos: file position |
| * |
| * Reads/writes up to table->maxlen/sizeof(unsigned long) unsigned long |
| * values from/to the user buffer, treated as an ASCII string. |
| * |
| * This routine will ensure the values are within the range specified by |
| * table->extra1 (min) and table->extra2 (max). |
| * |
| * Returns 0 on success. |
| */ |
| int proc_doulongvec_minmax(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return do_proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos, 1l, 1l); |
| } |
| |
| /** |
| * proc_doulongvec_ms_jiffies_minmax - read a vector of millisecond values with min/max values |
| * @table: the sysctl table |
| * @write: %TRUE if this is a write to the sysctl file |
| * @filp: the file structure |
| * @buffer: the user buffer |
| * @lenp: the size of the user buffer |
| * @ppos: file position |
| * |
| * Reads/writes up to table->maxlen/sizeof(unsigned long) unsigned long |
| * values from/to the user buffer, treated as an ASCII string. The values |
| * are treated as milliseconds, and converted to jiffies when they are stored. |
| * |
| * This routine will ensure the values are within the range specified by |
| * table->extra1 (min) and table->extra2 (max). |
| * |
| * Returns 0 on success. |
| */ |
| int proc_doulongvec_ms_jiffies_minmax(ctl_table *table, int write, |
| struct file *filp, |
| void __user *buffer, |
| size_t *lenp, loff_t *ppos) |
| { |
| return do_proc_doulongvec_minmax(table, write, filp, buffer, |
| lenp, ppos, HZ, 1000l); |
| } |
| |
| |
| static int do_proc_dointvec_jiffies_conv(int *negp, unsigned long *lvalp, |
| int *valp, |
| int write, void *data) |
| { |
| if (write) { |
| *valp = *negp ? -(*lvalp*HZ) : (*lvalp*HZ); |
| } else { |
| int val = *valp; |
| unsigned long lval; |
| if (val < 0) { |
| *negp = -1; |
| lval = (unsigned long)-val; |
| } else { |
| *negp = 0; |
| lval = (unsigned long)val; |
| } |
| *lvalp = lval / HZ; |
| } |
| return 0; |
| } |
| |
| static int do_proc_dointvec_userhz_jiffies_conv(int *negp, unsigned long *lvalp, |
| int *valp, |
| int write, void *data) |
| { |
| if (write) { |
| *valp = clock_t_to_jiffies(*negp ? -*lvalp : *lvalp); |
| } else { |
| int val = *valp; |
| unsigned long lval; |
| if (val < 0) { |
| *negp = -1; |
| lval = (unsigned long)-val; |
| } else { |
| *negp = 0; |
| lval = (unsigned long)val; |
| } |
| *lvalp = jiffies_to_clock_t(lval); |
| } |
| return 0; |
| } |
| |
| static int do_proc_dointvec_ms_jiffies_conv(int *negp, unsigned long *lvalp, |
| int *valp, |
| int write, void *data) |
| { |
| if (write) { |
| *valp = msecs_to_jiffies(*negp ? -*lvalp : *lvalp); |
| } else { |
| int val = *valp; |
| unsigned long lval; |
| if (val < 0) { |
| *negp = -1; |
| lval = (unsigned long)-val; |
| } else { |
| *negp = 0; |
| lval = (unsigned long)val; |
| } |
| *lvalp = jiffies_to_msecs(lval); |
| } |
| return 0; |
| } |
| |
| /** |
| * proc_dointvec_jiffies - read a vector of integers as seconds |
| * @table: the sysctl table |
| * @write: %TRUE if this is a write to the sysctl file |
| * @filp: the file structure |
| * @buffer: the user buffer |
| * @lenp: the size of the user buffer |
| * @ppos: file position |
| * |
| * Reads/writes up to table->maxlen/sizeof(unsigned int) integer |
| * values from/to the user buffer, treated as an ASCII string. |
| * The values read are assumed to be in seconds, and are converted into |
| * jiffies. |
| * |
| * Returns 0 on success. |
| */ |
| int proc_dointvec_jiffies(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return do_proc_dointvec(table,write,filp,buffer,lenp,ppos, |
| do_proc_dointvec_jiffies_conv,NULL); |
| } |
| |
| /** |
| * proc_dointvec_userhz_jiffies - read a vector of integers as 1/USER_HZ seconds |
| * @table: the sysctl table |
| * @write: %TRUE if this is a write to the sysctl file |
| * @filp: the file structure |
| * @buffer: the user buffer |
| * @lenp: the size of the user buffer |
| * |
| * Reads/writes up to table->maxlen/sizeof(unsigned int) integer |
| * values from/to the user buffer, treated as an ASCII string. |
| * The values read are assumed to be in 1/USER_HZ seconds, and |
| * are converted into jiffies. |
| * |
| * Returns 0 on success. |
| */ |
| int proc_dointvec_userhz_jiffies(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return do_proc_dointvec(table,write,filp,buffer,lenp,ppos, |
| do_proc_dointvec_userhz_jiffies_conv,NULL); |
| } |
| |
| /** |
| * proc_dointvec_ms_jiffies - read a vector of integers as 1 milliseconds |
| * @table: the sysctl table |
| * @write: %TRUE if this is a write to the sysctl file |
| * @filp: the file structure |
| * @buffer: the user buffer |
| * @lenp: the size of the user buffer |
| * @ppos: file position |
| * @ppos: the current position in the file |
| * |
| * Reads/writes up to table->maxlen/sizeof(unsigned int) integer |
| * values from/to the user buffer, treated as an ASCII string. |
| * The values read are assumed to be in 1/1000 seconds, and |
| * are converted into jiffies. |
| * |
| * Returns 0 on success. |
| */ |
| int proc_dointvec_ms_jiffies(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return do_proc_dointvec(table, write, filp, buffer, lenp, ppos, |
| do_proc_dointvec_ms_jiffies_conv, NULL); |
| } |
| |
| #else /* CONFIG_PROC_FS */ |
| |
| int proc_dostring(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| static int proc_doutsstring(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_dointvec(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_dointvec_bset(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_dointvec_minmax(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_dointvec_jiffies(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_dointvec_userhz_jiffies(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_dointvec_ms_jiffies(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_doulongvec_minmax(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_doulongvec_ms_jiffies_minmax(ctl_table *table, int write, |
| struct file *filp, |
| void __user *buffer, |
| size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| |
| #endif /* CONFIG_PROC_FS */ |
| |
| |
| /* |
| * General sysctl support routines |
| */ |
| |
| /* The generic string strategy routine: */ |
| int sysctl_string(ctl_table *table, int __user *name, int nlen, |
| void __user *oldval, size_t __user *oldlenp, |
| void __user *newval, size_t newlen, void **context) |
| { |
| size_t l, len; |
| |
| if (!table->data || !table->maxlen) |
| return -ENOTDIR; |
| |
| if (oldval && oldlenp) { |
| if (get_user(len, oldlenp)) |
| return -EFAULT; |
| if (len) { |
| l = strlen(table->data); |
| if (len > l) len = l; |
| if (len >= table->maxlen) |
| len = table->maxlen; |
| if(copy_to_user(oldval, table->data, len)) |
| return -EFAULT; |
| if(put_user(0, ((char __user *) oldval) + len)) |
| return -EFAULT; |
| if(put_user(len, oldlenp)) |
| return -EFAULT; |
| } |
| } |
| if (newval && newlen) { |
| len = newlen; |
| if (len > table->maxlen) |
| len = table->maxlen; |
| if(copy_from_user(table->data, newval, len)) |
| return -EFAULT; |
| if (len == table->maxlen) |
| len--; |
| ((char *) table->data)[len] = 0; |
| } |
| return 0; |
| } |
| |
| /* |
| * This function makes sure that all of the integers in the vector |
| * are between the minimum and maximum values given in the arrays |
| * table->extra1 and table->extra2, respectively. |
| */ |
| int sysctl_intvec(ctl_table *table, int __user *name, int nlen, |
| void __user *oldval, size_t __user *oldlenp, |
| void __user *newval, size_t newlen, void **context) |
| { |
| |
| if (newval && newlen) { |
| int __user *vec = (int __user *) newval; |
| int *min = (int *) table->extra1; |
| int *max = (int *) table->extra2; |
| size_t length; |
| int i; |
| |
| if (newlen % sizeof(int) != 0) |
| return -EINVAL; |
| |
| if (!table->extra1 && !table->extra2) |
| return 0; |
| |
| if (newlen > table->maxlen) |
| newlen = table->maxlen; |
| length = newlen / sizeof(int); |
| |
| for (i = 0; i < length; i++) { |
| int value; |
| if (get_user(value, vec + i)) |
| return -EFAULT; |
| if (min && value < min[i]) |
| return -EINVAL; |
| if (max && value > max[i]) |
| return -EINVAL; |
| } |
| } |
| return 0; |
| } |
| |
| /* Strategy function to convert jiffies to seconds */ |
| int sysctl_jiffies(ctl_table *table, int __user *name, int nlen, |
| void __user *oldval, size_t __user *oldlenp, |
| void __user *newval, size_t newlen, void **context) |
| { |
| if (oldval) { |
| size_t olen; |
| if (oldlenp) { |
| if (get_user(olen, oldlenp)) |
| return -EFAULT; |
| if (olen!=sizeof(int)) |
| return -EINVAL; |
| } |
| if (put_user(*(int *)(table->data)/HZ, (int __user *)oldval) || |
| (oldlenp && put_user(sizeof(int),oldlenp))) |
| return -EFAULT; |
| } |
| if (newval && newlen) { |
| int new; |
| if (newlen != sizeof(int)) |
| return -EINVAL; |
| if (get_user(new, (int __user *)newval)) |
| return -EFAULT; |
| *(int *)(table->data) = new*HZ; |
| } |
| return 1; |
| } |
| |
| /* Strategy function to convert jiffies to seconds */ |
| int sysctl_ms_jiffies(ctl_table *table, int __user *name, int nlen, |
| void __user *oldval, size_t __user *oldlenp, |
| void __user *newval, size_t newlen, void **context) |
| { |
| if (oldval) { |
| size_t olen; |
| if (oldlenp) { |
| if (get_user(olen, oldlenp)) |
| return -EFAULT; |
| if (olen!=sizeof(int)) |
| return -EINVAL; |
| } |
| if (put_user(jiffies_to_msecs(*(int *)(table->data)), (int __user *)oldval) || |
| (oldlenp && put_user(sizeof(int),oldlenp))) |
| return -EFAULT; |
| } |
| if (newval && newlen) { |
| int new; |
| if (newlen != sizeof(int)) |
| return -EINVAL; |
| if (get_user(new, (int __user *)newval)) |
| return -EFAULT; |
| *(int *)(table->data) = msecs_to_jiffies(new); |
| } |
| return 1; |
| } |
| |
| #else /* CONFIG_SYSCTL */ |
| |
| |
| asmlinkage long sys_sysctl(struct __sysctl_args __user *args) |
| { |
| return -ENOSYS; |
| } |
| |
| int sysctl_string(ctl_table *table, int __user *name, int nlen, |
| void __user *oldval, size_t __user *oldlenp, |
| void __user *newval, size_t newlen, void **context) |
| { |
| return -ENOSYS; |
| } |
| |
| int sysctl_intvec(ctl_table *table, int __user *name, int nlen, |
| void __user *oldval, size_t __user *oldlenp, |
| void __user *newval, size_t newlen, void **context) |
| { |
| return -ENOSYS; |
| } |
| |
| int sysctl_jiffies(ctl_table *table, int __user *name, int nlen, |
| void __user *oldval, size_t __user *oldlenp, |
| void __user *newval, size_t newlen, void **context) |
| { |
| return -ENOSYS; |
| } |
| |
| int sysctl_ms_jiffies(ctl_table *table, int __user *name, int nlen, |
| void __user *oldval, size_t __user *oldlenp, |
| void __user *newval, size_t newlen, void **context) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_dostring(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_dointvec(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_dointvec_bset(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_dointvec_minmax(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_dointvec_jiffies(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_dointvec_userhz_jiffies(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_dointvec_ms_jiffies(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_doulongvec_minmax(ctl_table *table, int write, struct file *filp, |
| void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| int proc_doulongvec_ms_jiffies_minmax(ctl_table *table, int write, |
| struct file *filp, |
| void __user *buffer, |
| size_t *lenp, loff_t *ppos) |
| { |
| return -ENOSYS; |
| } |
| |
| struct ctl_table_header * register_sysctl_table(ctl_table * table, |
| int insert_at_head) |
| { |
| return NULL; |
| } |
| |
| void unregister_sysctl_table(struct ctl_table_header * table) |
| { |
| } |
| |
| #endif /* CONFIG_SYSCTL */ |
| |
| /* |
| * No sense putting this after each symbol definition, twice, |
| * exception granted :-) |
| */ |
| EXPORT_SYMBOL(proc_dointvec); |
| EXPORT_SYMBOL(proc_dointvec_jiffies); |
| EXPORT_SYMBOL(proc_dointvec_minmax); |
| EXPORT_SYMBOL(proc_dointvec_userhz_jiffies); |
| EXPORT_SYMBOL(proc_dointvec_ms_jiffies); |
| EXPORT_SYMBOL(proc_dostring); |
| EXPORT_SYMBOL(proc_doulongvec_minmax); |
| EXPORT_SYMBOL(proc_doulongvec_ms_jiffies_minmax); |
| EXPORT_SYMBOL(register_sysctl_table); |
| EXPORT_SYMBOL(sysctl_intvec); |
| EXPORT_SYMBOL(sysctl_jiffies); |
| EXPORT_SYMBOL(sysctl_ms_jiffies); |
| EXPORT_SYMBOL(sysctl_string); |
| EXPORT_SYMBOL(unregister_sysctl_table); |