powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)
Describe the PHY topology for all configurations supported by each board
Based on prior work by Andy Fleming <afleming@freescale.com>
Signed-off-by: Shruti Kanetkar <Shruti@freescale.com>
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com>
Signed-off-by: Scott Wood <oss@buserror.net>
diff --git a/arch/powerpc/boot/dts/fsl/p5020ds.dts b/arch/powerpc/boot/dts/fsl/p5020ds.dts
index 920dc77..ea424ea 100644
--- a/arch/powerpc/boot/dts/fsl/p5020ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p5020ds.dts
@@ -1,7 +1,7 @@
/*
* P5020DS Device Tree Source
*
- * Copyright 2010 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2010 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,20 @@
#size-cells = <2>;
interrupt-parent = <&mpic>;
+ aliases {
+ phy_rgmii_0 = &phy_rgmii_0;
+ phy_rgmii_1 = &phy_rgmii_1;
+ phy_sgmii_1c = &phy_sgmii_1c;
+ phy_sgmii_1d = &phy_sgmii_1d;
+ phy_sgmii_1e = &phy_sgmii_1e;
+ phy_sgmii_1f = &phy_sgmii_1f;
+ phy_xgmii_1 = &phy_xgmii_1;
+ phy_xgmii_2 = &phy_xgmii_2;
+ emi1_rgmii = &hydra_mdio_rgmii;
+ emi1_sgmii = &hydra_mdio_sgmii;
+ emi2_xgmii = &hydra_mdio_xgmii;
+ };
+
memory {
device_type = "memory";
};
@@ -150,6 +164,52 @@
reg = <0x4c>;
};
};
+
+ fman@400000 {
+ ethernet@e0000 {
+ phy-handle = <&phy_sgmii_1c>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&phy_sgmii_1d>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&phy_sgmii_1e>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&phy_sgmii_1f>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&phy_rgmii_1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&phy_xgmii_1>;
+ phy-connection-type = "xgmii";
+ };
+
+ hydra_mdio_xgmii: mdio@f1000 {
+ status = "disabled";
+
+ phy_xgmii_1: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x4>;
+ };
+
+ phy_xgmii_2: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ };
+ };
+ };
};
rio: rapidio@ffe0c0000 {
@@ -215,8 +275,58 @@
};
board-control@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
reg = <3 0 0x30>;
+ ranges = <0 3 0 0x30>;
+
+ mdio-mux-emi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ reg = <9 1>;
+ mux-mask = <0x78>;
+
+ hydra_mdio_rgmii: rgmii-mdio@8 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <8>;
+ status = "disabled";
+
+ phy_rgmii_0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ phy_rgmii_1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+
+ hydra_mdio_sgmii: sgmii-mdio@28 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x28>;
+ status = "disabled";
+
+ phy_sgmii_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+ };
};
};