iwlwifi: mvm: add new ADD_STA command version
The 9000 hardware introduces the frame releaser, which
keeps track of the aggregation window and notifies host
of the window status. This requires in turn updating
the hardware with the RX BA session window size.
Firmware API was changed to enable that, update the driver
accordingly.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h
index 1eb3983..90d9113 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h
@@ -7,6 +7,7 @@
*
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
+ * Copyright(c) 2016 Intel Deutschland GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -33,6 +34,7 @@
*
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
+ * Copyright(c) 2016 Intel Deutschland GmbH
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -257,7 +259,7 @@
#define IWL_ADD_STA_BAID_MASK 0xFF00
/**
- * struct iwl_mvm_add_sta_cmd - Add/modify a station in the fw's sta table.
+ * struct iwl_mvm_add_sta_cmd_v7 - Add/modify a station in the fw's sta table.
* ( REPLY_ADD_STA = 0x18 )
* @add_modify: 1: modify existing, 0: add new station
* @awake_acs:
@@ -293,7 +295,7 @@
* ADD_STA sets up the table entry for one station, either creating a new
* entry, or modifying a pre-existing one.
*/
-struct iwl_mvm_add_sta_cmd {
+struct iwl_mvm_add_sta_cmd_v7 {
u8 add_modify;
u8 awake_acs;
__le16 tid_disable_tx;
@@ -316,6 +318,68 @@
} __packed; /* ADD_STA_CMD_API_S_VER_7 */
/**
+ * struct iwl_mvm_add_sta_cmd - Add/modify a station in the fw's sta table.
+ * ( REPLY_ADD_STA = 0x18 )
+ * @add_modify: 1: modify existing, 0: add new station
+ * @awake_acs:
+ * @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable
+ * AMPDU for tid x. Set %STA_MODIFY_TID_DISABLE_TX to change this field.
+ * @mac_id_n_color: the Mac context this station belongs to
+ * @addr[ETH_ALEN]: station's MAC address
+ * @sta_id: index of station in uCode's station table
+ * @modify_mask: STA_MODIFY_*, selects which parameters to modify vs. leave
+ * alone. 1 - modify, 0 - don't change.
+ * @station_flags: look at %iwl_sta_flags
+ * @station_flags_msk: what of %station_flags have changed
+ * @add_immediate_ba_tid: tid for which to add block-ack support (Rx)
+ * Set %STA_MODIFY_ADD_BA_TID to use this field, and also set
+ * add_immediate_ba_ssn.
+ * @remove_immediate_ba_tid: tid for which to remove block-ack support (Rx)
+ * Set %STA_MODIFY_REMOVE_BA_TID to use this field
+ * @add_immediate_ba_ssn: ssn for the Rx block-ack session. Used together with
+ * add_immediate_ba_tid.
+ * @sleep_tx_count: number of packets to transmit to station even though it is
+ * asleep. Used to synchronise PS-poll and u-APSD responses while ucode
+ * keeps track of STA sleep state.
+ * @sleep_state_flags: Look at %iwl_sta_sleep_flag.
+ * @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP
+ * mac-addr.
+ * @beamform_flags: beam forming controls
+ * @tfd_queue_msk: tfd queues used by this station
+ * @rx_ba_window: aggregation window size
+ *
+ * The device contains an internal table of per-station information, with info
+ * on security keys, aggregation parameters, and Tx rates for initial Tx
+ * attempt and any retries (set by REPLY_TX_LINK_QUALITY_CMD).
+ *
+ * ADD_STA sets up the table entry for one station, either creating a new
+ * entry, or modifying a pre-existing one.
+ */
+struct iwl_mvm_add_sta_cmd {
+ u8 add_modify;
+ u8 awake_acs;
+ __le16 tid_disable_tx;
+ __le32 mac_id_n_color;
+ u8 addr[ETH_ALEN]; /* _STA_ID_MODIFY_INFO_API_S_VER_1 */
+ __le16 reserved2;
+ u8 sta_id;
+ u8 modify_mask;
+ __le16 reserved3;
+ __le32 station_flags;
+ __le32 station_flags_msk;
+ u8 add_immediate_ba_tid;
+ u8 remove_immediate_ba_tid;
+ __le16 add_immediate_ba_ssn;
+ __le16 sleep_tx_count;
+ __le16 sleep_state_flags;
+ __le16 assoc_id;
+ __le16 beamform_flags;
+ __le32 tfd_queue_msk;
+ __le16 rx_ba_window;
+ __le16 reserved;
+} __packed; /* ADD_STA_CMD_API_S_VER_8 */
+
+/**
* struct iwl_mvm_add_sta_key_cmd - add/modify sta key
* ( REPLY_ADD_STA_KEY = 0x17 )
* @sta_id: index of station in uCode's station table