[SCSI] aacraid: Series 7 Async. (performance) mode support
- Series 7 Async. (performance) mode support added
- New scatter/gather list format for Series 7
- Driver converts s/g list to a firmware suitable list for best performance on
Series 7, this can be disabled with driver parameter "aac_convert_sgl" for
testing purposes
- New container read/write command structure for Series 7
- Fast response support for the SCSI pass-through path added
- Async. status response buffer changes
Signed-off-by: Mahesh Rajashekhara <Mahesh_Rajashekhara@pmc-sierra.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 6ab32db..9e933a8 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -12,7 +12,7 @@
*----------------------------------------------------------------------------*/
#ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 28900
+# define AAC_DRIVER_BUILD 29800
# define AAC_DRIVER_BRANCH "-ms"
#endif
#define MAXIMUM_NUM_CONTAINERS 32
@@ -100,6 +100,13 @@
u32 flags; /* reserved for F/W use */
};
+struct sge_ieee1212 {
+ u32 addrLow;
+ u32 addrHigh;
+ u32 length;
+ u32 flags;
+};
+
/*
* SGMAP
*
@@ -270,6 +277,8 @@
*/
#define FIB_MAGIC 0x0001
+#define FIB_MAGIC2 0x0004
+#define FIB_MAGIC2_64 0x0005
/*
* Define the priority levels the FSA communication routines support.
@@ -296,22 +305,20 @@
__le32 XferState; /* Current transfer state for this CCB */
__le16 Command; /* Routing information for the destination */
u8 StructType; /* Type FIB */
- u8 Flags; /* Flags for FIB */
+ u8 Unused; /* Unused */
__le16 Size; /* Size of this FIB in bytes */
__le16 SenderSize; /* Size of the FIB in the sender
(for response sizing) */
__le32 SenderFibAddress; /* Host defined data in the FIB */
- __le32 ReceiverFibAddress;/* Logical address of this FIB for
- the adapter */
- u32 SenderData; /* Place holder for the sender to store data */
union {
- struct {
- __le32 _ReceiverTimeStart; /* Timestamp for
- receipt of fib */
- __le32 _ReceiverTimeDone; /* Timestamp for
- completion of fib */
- } _s;
- } _u;
+ __le32 ReceiverFibAddress;/* Logical address of this FIB for
+ the adapter (old) */
+ __le32 SenderFibAddressHigh;/* upper 32bit of phys. FIB address */
+ __le32 TimeStamp; /* otherwise timestamp for FW internal use */
+ } u;
+ u32 Handle; /* FIB handle used for MSGU commnunication */
+ u32 Previous; /* FW internal use */
+ u32 Next; /* FW internal use */
};
struct hw_fib {
@@ -361,6 +368,7 @@
#define ContainerCommand 500
#define ContainerCommand64 501
#define ContainerRawIo 502
+#define ContainerRawIo2 503
/*
* Scsi Port commands (scsi passthrough)
*/
@@ -417,6 +425,7 @@
#define ADAPTER_INIT_STRUCT_REVISION 3
#define ADAPTER_INIT_STRUCT_REVISION_4 4 // rocket science
#define ADAPTER_INIT_STRUCT_REVISION_6 6 /* PMC src */
+#define ADAPTER_INIT_STRUCT_REVISION_7 7 /* Denali */
struct aac_init
{
@@ -441,7 +450,9 @@
#define INITFLAGS_NEW_COMM_SUPPORTED 0x00000001
#define INITFLAGS_DRIVER_USES_UTC_TIME 0x00000010
#define INITFLAGS_DRIVER_SUPPORTS_PM 0x00000020
-#define INITFLAGS_NEW_COMM_TYPE1_SUPPORTED 0x00000041
+#define INITFLAGS_NEW_COMM_TYPE1_SUPPORTED 0x00000040
+#define INITFLAGS_FAST_JBOD_SUPPORTED 0x00000080
+#define INITFLAGS_NEW_COMM_TYPE2_SUPPORTED 0x00000100
__le32 MaxIoCommands; /* max outstanding commands */
__le32 MaxIoSize; /* largest I/O command */
__le32 MaxFibSize; /* largest FIB to adapter */
@@ -1124,6 +1135,7 @@
# define AAC_COMM_PRODUCER 0
# define AAC_COMM_MESSAGE 1
# define AAC_COMM_MESSAGE_TYPE1 3
+# define AAC_COMM_MESSAGE_TYPE2 4
u8 raw_io_interface;
u8 raw_io_64;
u8 printf_enabled;
@@ -1182,6 +1194,7 @@
#define FIB_CONTEXT_FLAG_TIMED_OUT (0x00000001)
#define FIB_CONTEXT_FLAG (0x00000002)
#define FIB_CONTEXT_FLAG_WAIT (0x00000004)
+#define FIB_CONTEXT_FLAG_FASTRESP (0x00000008)
/*
* Define the command values
@@ -1288,6 +1301,22 @@
#define CMDATA_SYNCH 4
#define CMUNSTABLE 5
+#define RIO_TYPE_WRITE 0x0000
+#define RIO_TYPE_READ 0x0001
+#define RIO_SUREWRITE 0x0008
+
+#define RIO2_IO_TYPE 0x0003
+#define RIO2_IO_TYPE_WRITE 0x0000
+#define RIO2_IO_TYPE_READ 0x0001
+#define RIO2_IO_TYPE_VERIFY 0x0002
+#define RIO2_IO_ERROR 0x0004
+#define RIO2_IO_SUREWRITE 0x0008
+#define RIO2_SGL_CONFORMANT 0x0010
+#define RIO2_SG_FORMAT 0xF000
+#define RIO2_SG_FORMAT_ARC 0x0000
+#define RIO2_SG_FORMAT_SRL 0x1000
+#define RIO2_SG_FORMAT_IEEE1212 0x2000
+
struct aac_read
{
__le32 command;
@@ -1332,9 +1361,6 @@
__le32 block;
__le16 pad;
__le16 flags;
-#define IO_TYPE_WRITE 0x00000000
-#define IO_TYPE_READ 0x00000001
-#define IO_SUREWRITE 0x00000008
struct sgmap64 sg; // Must be last in struct because it is variable
};
struct aac_write_reply
@@ -1355,6 +1381,22 @@
struct sgmapraw sg;
};
+struct aac_raw_io2 {
+ __le32 blockLow;
+ __le32 blockHigh;
+ __le32 byteCount;
+ __le16 cid;
+ __le16 flags; /* RIO2 flags */
+ __le32 sgeFirstSize; /* size of first sge el. */
+ __le32 sgeNominalSize; /* size of 2nd sge el. (if conformant) */
+ u8 sgeCnt; /* only 8 bits required */
+ u8 bpTotal; /* reserved for F/W use */
+ u8 bpComplete; /* reserved for F/W use */
+ u8 sgeFirstIndex; /* reserved for F/W use */
+ u8 unused[4];
+ struct sge_ieee1212 sge[1];
+};
+
#define CT_FLUSH_CACHE 129
struct aac_synchronize {
__le32 command; /* VM_ContainerConfig */