frame relay dlci/frad: Update to current logging forms
Use pr_fmt, pr_<level> and netdev_<level> as appropriate.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c
index 3f4e2b5..c853161 100644
--- a/drivers/net/wan/sdla.c
+++ b/drivers/net/wan/sdla.c
@@ -32,6 +32,8 @@
* 2 of the License, or (at your option) any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
@@ -350,24 +352,24 @@
case SDLA_RET_MODEM:
state = data;
if (*state & SDLA_MODEM_DCD_LOW)
- printk(KERN_INFO "%s: Modem DCD unexpectedly low!\n", dev->name);
+ netdev_info(dev, "Modem DCD unexpectedly low!\n");
if (*state & SDLA_MODEM_CTS_LOW)
- printk(KERN_INFO "%s: Modem CTS unexpectedly low!\n", dev->name);
+ netdev_info(dev, "Modem CTS unexpectedly low!\n");
/* I should probably do something about this! */
break;
case SDLA_RET_CHANNEL_OFF:
- printk(KERN_INFO "%s: Channel became inoperative!\n", dev->name);
+ netdev_info(dev, "Channel became inoperative!\n");
/* same here */
break;
case SDLA_RET_CHANNEL_ON:
- printk(KERN_INFO "%s: Channel became operative!\n", dev->name);
+ netdev_info(dev, "Channel became operative!\n");
/* same here */
break;
case SDLA_RET_DLCI_STATUS:
- printk(KERN_INFO "%s: Status change reported by Access Node.\n", dev->name);
+ netdev_info(dev, "Status change reported by Access Node\n");
len /= sizeof(struct _dlci_stat);
for(pstatus = data, i=0;i < len;i++,pstatus++)
{
@@ -382,29 +384,32 @@
sprintf(line, "unknown status: %02X", pstatus->flags);
state = line;
}
- printk(KERN_INFO "%s: DLCI %i: %s.\n", dev->name, pstatus->dlci, state);
+ netdev_info(dev, "DLCI %i: %s\n",
+ pstatus->dlci, state);
/* same here */
}
break;
case SDLA_RET_DLCI_UNKNOWN:
- printk(KERN_INFO "%s: Received unknown DLCIs:", dev->name);
+ netdev_info(dev, "Received unknown DLCIs:");
len /= sizeof(short);
for(pdlci = data,i=0;i < len;i++,pdlci++)
- printk(" %i", *pdlci);
- printk("\n");
+ pr_cont(" %i", *pdlci);
+ pr_cont("\n");
break;
case SDLA_RET_TIMEOUT:
- printk(KERN_ERR "%s: Command timed out!\n", dev->name);
+ netdev_err(dev, "Command timed out!\n");
break;
case SDLA_RET_BUF_OVERSIZE:
- printk(KERN_INFO "%s: Bc/CIR overflow, acceptable size is %i\n", dev->name, len);
+ netdev_info(dev, "Bc/CIR overflow, acceptable size is %i\n",
+ len);
break;
case SDLA_RET_BUF_TOO_BIG:
- printk(KERN_INFO "%s: Buffer size over specified max of %i\n", dev->name, len);
+ netdev_info(dev, "Buffer size over specified max of %i\n",
+ len);
break;
case SDLA_RET_CHANNEL_INACTIVE:
@@ -415,7 +420,8 @@
break;
default:
- printk(KERN_DEBUG "%s: Cmd 0x%2.2X generated return code 0x%2.2X\n", dev->name, cmd, ret);
+ netdev_dbg(dev, "Cmd 0x%02X generated return code 0x%02X\n",
+ cmd, ret);
/* Further processing could be done here */
break;
}
@@ -678,12 +684,14 @@
case ARPHRD_FRAD:
if (skb->dev->type != ARPHRD_DLCI)
{
- printk(KERN_WARNING "%s: Non DLCI device, type %i, tried to send on FRAD module.\n", dev->name, skb->dev->type);
+ netdev_warn(dev, "Non DLCI device, type %i, tried to send on FRAD module\n",
+ skb->dev->type);
accept = 0;
}
break;
default:
- printk(KERN_WARNING "%s: unknown firmware type 0x%4.4X\n", dev->name, dev->type);
+ netdev_warn(dev, "unknown firmware type 0x%04X\n",
+ dev->type);
accept = 0;
break;
}
@@ -807,7 +815,8 @@
if (i == CONFIG_DLCI_MAX)
{
- printk(KERN_NOTICE "%s: Received packet from invalid DLCI %i, ignoring.", dev->name, dlci);
+ netdev_notice(dev, "Received packet from invalid DLCI %i, ignoring\n",
+ dlci);
dev->stats.rx_errors++;
success = 0;
}
@@ -819,7 +828,7 @@
skb = dev_alloc_skb(len + sizeof(struct frhdr));
if (skb == NULL)
{
- printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
+ netdev_notice(dev, "Memory squeeze, dropping packet\n");
dev->stats.rx_dropped++;
success = 0;
}
@@ -880,8 +889,7 @@
if (!flp->initialized)
{
- printk(KERN_WARNING "%s: irq %d for uninitialized device.\n",
- dev->name, dev->irq);
+ netdev_warn(dev, "irq %d for uninitialized device\n", dev->irq);
return IRQ_NONE;
}
@@ -901,7 +909,7 @@
case SDLA_INTR_TX:
case SDLA_INTR_COMPLETE:
case SDLA_INTR_TIMER:
- printk(KERN_WARNING "%s: invalid irq flag 0x%02X.\n", dev->name, byte);
+ netdev_warn(dev, "invalid irq flag 0x%02X\n", byte);
break;
}
@@ -1347,7 +1355,7 @@
return -EINVAL;
if (!request_region(map->base_addr, SDLA_IO_EXTENTS, dev->name)){
- printk(KERN_WARNING "SDLA: io-port 0x%04lx in use\n", dev->base_addr);
+ pr_warn("io-port 0x%04lx in use\n", dev->base_addr);
return -EINVAL;
}
base = map->base_addr;
@@ -1412,7 +1420,7 @@
}
}
- printk(KERN_NOTICE "%s: Unknown card type\n", dev->name);
+ netdev_notice(dev, "Unknown card type\n");
err = -ENODEV;
goto fail;