sound: oxygen: enable headphone output on Claro cards
On the HT-Omega Claro (halo) sound cards, the headphone amplifier must
be enabled explicitly by setting a GPIO bit.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c
index 1d8e2b2..72db4c3 100644
--- a/sound/pci/oxygen/oxygen.c
+++ b/sound/pci/oxygen/oxygen.c
@@ -1,5 +1,5 @@
/*
- * C-Media CMI8788 driver for C-Media's reference design and for the X-Meridian
+ * C-Media CMI8788 driver for C-Media's reference design and similar models
*
* Copyright (c) Clemens Ladisch <clemens@ladisch.de>
*
@@ -26,6 +26,7 @@
*
* GPIO 0 -> DFS0 of AK5385
* GPIO 1 -> DFS1 of AK5385
+ * GPIO 8 -> enable headphone amplifier on HT-Omega models
*/
#include <linux/delay.h>
@@ -61,7 +62,8 @@
enum {
MODEL_CMEDIA_REF, /* C-Media's reference design */
MODEL_MERIDIAN, /* AuzenTech X-Meridian */
- MODEL_HALO, /* HT-Omega Claro halo */
+ MODEL_CLARO, /* HT-Omega Claro */
+ MODEL_CLARO_HALO, /* HT-Omega Claro halo */
};
static struct pci_device_id oxygen_ids[] __devinitdata = {
@@ -74,8 +76,8 @@
{ OXYGEN_PCI_SUBID(0x147a, 0xa017), .driver_data = MODEL_CMEDIA_REF },
{ OXYGEN_PCI_SUBID(0x1a58, 0x0910), .driver_data = MODEL_CMEDIA_REF },
{ OXYGEN_PCI_SUBID(0x415a, 0x5431), .driver_data = MODEL_MERIDIAN },
- { OXYGEN_PCI_SUBID(0x7284, 0x9761), .driver_data = MODEL_CMEDIA_REF },
- { OXYGEN_PCI_SUBID(0x7284, 0x9781), .driver_data = MODEL_HALO },
+ { OXYGEN_PCI_SUBID(0x7284, 0x9761), .driver_data = MODEL_CLARO },
+ { OXYGEN_PCI_SUBID(0x7284, 0x9781), .driver_data = MODEL_CLARO_HALO },
{ }
};
MODULE_DEVICE_TABLE(pci, oxygen_ids);
@@ -86,6 +88,8 @@
#define GPIO_AK5385_DFS_DOUBLE 0x0001
#define GPIO_AK5385_DFS_QUAD 0x0002
+#define GPIO_CLARO_HP 0x0100
+
struct generic_data {
u8 ak4396_ctl2;
u16 saved_wm8785_registers[2];
@@ -196,16 +200,46 @@
ak5385_init(chip);
}
-static void halo_init(struct oxygen *chip)
+static void claro_enable_hp(struct oxygen *chip)
+{
+ msleep(300);
+ oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_CLARO_HP);
+ oxygen_set_bits16(chip, OXYGEN_GPIO_DATA, GPIO_CLARO_HP);
+}
+
+static void claro_init(struct oxygen *chip)
+{
+ ak4396_init(chip);
+ wm8785_init(chip);
+ claro_enable_hp(chip);
+}
+
+static void claro_halo_init(struct oxygen *chip)
{
ak4396_init(chip);
ak5385_init(chip);
+ claro_enable_hp(chip);
}
static void generic_cleanup(struct oxygen *chip)
{
}
+static void claro_disable_hp(struct oxygen *chip)
+{
+ oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, GPIO_CLARO_HP);
+}
+
+static void claro_cleanup(struct oxygen *chip)
+{
+ claro_disable_hp(chip);
+}
+
+static void claro_suspend(struct oxygen *chip)
+{
+ claro_disable_hp(chip);
+}
+
static void generic_resume(struct oxygen *chip)
{
ak4396_registers_init(chip);
@@ -217,9 +251,10 @@
ak4396_registers_init(chip);
}
-static void halo_resume(struct oxygen *chip)
+static void claro_resume(struct oxygen *chip)
{
ak4396_registers_init(chip);
+ claro_enable_hp(chip);
}
static void set_ak4396_params(struct oxygen *chip,
@@ -346,14 +381,22 @@
CAPTURE_0_FROM_I2S_2 |
CAPTURE_1_FROM_SPDIF;
break;
- case MODEL_HALO:
- chip->model.init = halo_init;
- chip->model.resume = halo_resume;
+ case MODEL_CLARO:
+ chip->model.init = claro_init;
+ chip->model.cleanup = claro_cleanup;
+ chip->model.suspend = claro_suspend;
+ chip->model.resume = claro_resume;
+ break;
+ case MODEL_CLARO_HALO:
+ chip->model.init = claro_halo_init;
+ chip->model.cleanup = claro_cleanup;
+ chip->model.suspend = claro_suspend;
+ chip->model.resume = claro_resume;
chip->model.set_adc_params = set_ak5385_params;
break;
}
if (id->driver_data == MODEL_MERIDIAN ||
- id->driver_data == MODEL_HALO) {
+ id->driver_data == MODEL_CLARO_HALO) {
chip->model.misc_flags = OXYGEN_MISC_MIDI;
chip->model.device_config |= MIDI_OUTPUT | MIDI_INPUT;
}