brcmfmac: (clean) Rename sdio related files.
Rename sdio_host.h to sdio.h and dhd_sdio.c to sdio.c.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
new file mode 100644
index 0000000..73ac0c3
--- /dev/null
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
@@ -0,0 +1,4276 @@
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/printk.h>
+#include <linux/pci_ids.h>
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/card.h>
+#include <linux/semaphore.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/bcma/bcma.h>
+#include <linux/debugfs.h>
+#include <linux/vmalloc.h>
+#include <linux/platform_data/brcmfmac-sdio.h>
+#include <linux/moduleparam.h>
+#include <asm/unaligned.h>
+#include <defs.h>
+#include <brcmu_wifi.h>
+#include <brcmu_utils.h>
+#include <brcm_hw_ids.h>
+#include <soc.h>
+#include "sdio.h"
+#include "chip.h"
+#include "firmware.h"
+
+#define DCMD_RESP_TIMEOUT 2000 /* In milli second */
+
+#ifdef DEBUG
+
+#define BRCMF_TRAP_INFO_SIZE 80
+
+#define CBUF_LEN (128)
+
+/* Device console log buffer state */
+#define CONSOLE_BUFFER_MAX 2024
+
+struct rte_log_le {
+ __le32 buf; /* Can't be pointer on (64-bit) hosts */
+ __le32 buf_size;
+ __le32 idx;
+ char *_buf_compat; /* Redundant pointer for backward compat. */
+};
+
+struct rte_console {
+ /* Virtual UART
+ * When there is no UART (e.g. Quickturn),
+ * the host should write a complete
+ * input line directly into cbuf and then write
+ * the length into vcons_in.
+ * This may also be used when there is a real UART
+ * (at risk of conflicting with
+ * the real UART). vcons_out is currently unused.
+ */
+ uint vcons_in;
+ uint vcons_out;
+
+ /* Output (logging) buffer
+ * Console output is written to a ring buffer log_buf at index log_idx.
+ * The host may read the output when it sees log_idx advance.
+ * Output will be lost if the output wraps around faster than the host
+ * polls.
+ */
+ struct rte_log_le log_le;
+
+ /* Console input line buffer
+ * Characters are read one at a time into cbuf
+ * until <CR> is received, then
+ * the buffer is processed as a command line.
+ * Also used for virtual UART.
+ */
+ uint cbuf_idx;
+ char cbuf[CBUF_LEN];
+};
+
+#endif /* DEBUG */
+#include <chipcommon.h>
+
+#include "bus.h"
+#include "debug.h"
+#include "tracepoint.h"
+
+#define TXQLEN 2048 /* bulk tx queue length */
+#define TXHI (TXQLEN - 256) /* turn on flow control above TXHI */
+#define TXLOW (TXHI - 256) /* turn off flow control below TXLOW */
+#define PRIOMASK 7
+
+#define TXRETRIES 2 /* # of retries for tx frames */
+
+#define BRCMF_RXBOUND 50 /* Default for max rx frames in
+ one scheduling */
+
+#define BRCMF_TXBOUND 20 /* Default for max tx frames in
+ one scheduling */
+
+#define BRCMF_TXMINMAX 1 /* Max tx frames if rx still pending */
+
+#define MEMBLOCK 2048 /* Block size used for downloading
+ of dongle image */
+#define MAX_DATA_BUF (32 * 1024) /* Must be large enough to hold
+ biggest possible glom */
+
+#define BRCMF_FIRSTREAD (1 << 6)
+
+
+/* SBSDIO_DEVICE_CTL */
+
+/* 1: device will assert busy signal when receiving CMD53 */
+#define SBSDIO_DEVCTL_SETBUSY 0x01
+/* 1: assertion of sdio interrupt is synchronous to the sdio clock */
+#define SBSDIO_DEVCTL_SPI_INTR_SYNC 0x02
+/* 1: mask all interrupts to host except the chipActive (rev 8) */
+#define SBSDIO_DEVCTL_CA_INT_ONLY 0x04
+/* 1: isolate internal sdio signals, put external pads in tri-state; requires
+ * sdio bus power cycle to clear (rev 9) */
+#define SBSDIO_DEVCTL_PADS_ISO 0x08
+/* Force SD->SB reset mapping (rev 11) */
+#define SBSDIO_DEVCTL_SB_RST_CTL 0x30
+/* Determined by CoreControl bit */
+#define SBSDIO_DEVCTL_RST_CORECTL 0x00
+/* Force backplane reset */
+#define SBSDIO_DEVCTL_RST_BPRESET 0x10
+/* Force no backplane reset */
+#define SBSDIO_DEVCTL_RST_NOBPRESET 0x20
+
+/* direct(mapped) cis space */
+
+/* MAPPED common CIS address */
+#define SBSDIO_CIS_BASE_COMMON 0x1000
+/* maximum bytes in one CIS */
+#define SBSDIO_CIS_SIZE_LIMIT 0x200
+/* cis offset addr is < 17 bits */
+#define SBSDIO_CIS_OFT_ADDR_MASK 0x1FFFF
+
+/* manfid tuple length, include tuple, link bytes */
+#define SBSDIO_CIS_MANFID_TUPLE_LEN 6
+
+#define CORE_BUS_REG(base, field) \
+ (base + offsetof(struct sdpcmd_regs, field))
+
+/* SDIO function 1 register CHIPCLKCSR */
+/* Force ALP request to backplane */
+#define SBSDIO_FORCE_ALP 0x01
+/* Force HT request to backplane */
+#define SBSDIO_FORCE_HT 0x02
+/* Force ILP request to backplane */
+#define SBSDIO_FORCE_ILP 0x04
+/* Make ALP ready (power up xtal) */
+#define SBSDIO_ALP_AVAIL_REQ 0x08
+/* Make HT ready (power up PLL) */
+#define SBSDIO_HT_AVAIL_REQ 0x10
+/* Squelch clock requests from HW */
+#define SBSDIO_FORCE_HW_CLKREQ_OFF 0x20
+/* Status: ALP is ready */
+#define SBSDIO_ALP_AVAIL 0x40
+/* Status: HT is ready */
+#define SBSDIO_HT_AVAIL 0x80
+#define SBSDIO_CSR_MASK 0x1F
+#define SBSDIO_AVBITS (SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL)
+#define SBSDIO_ALPAV(regval) ((regval) & SBSDIO_AVBITS)
+#define SBSDIO_HTAV(regval) (((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS)
+#define SBSDIO_ALPONLY(regval) (SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval))
+#define SBSDIO_CLKAV(regval, alponly) \
+ (SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval)))
+
+/* intstatus */
+#define I_SMB_SW0 (1 << 0) /* To SB Mail S/W interrupt 0 */
+#define I_SMB_SW1 (1 << 1) /* To SB Mail S/W interrupt 1 */
+#define I_SMB_SW2 (1 << 2) /* To SB Mail S/W interrupt 2 */
+#define I_SMB_SW3 (1 << 3) /* To SB Mail S/W interrupt 3 */
+#define I_SMB_SW_MASK 0x0000000f /* To SB Mail S/W interrupts mask */
+#define I_SMB_SW_SHIFT 0 /* To SB Mail S/W interrupts shift */
+#define I_HMB_SW0 (1 << 4) /* To Host Mail S/W interrupt 0 */
+#define I_HMB_SW1 (1 << 5) /* To Host Mail S/W interrupt 1 */
+#define I_HMB_SW2 (1 << 6) /* To Host Mail S/W interrupt 2 */
+#define I_HMB_SW3 (1 << 7) /* To Host Mail S/W interrupt 3 */
+#define I_HMB_SW_MASK 0x000000f0 /* To Host Mail S/W interrupts mask */
+#define I_HMB_SW_SHIFT 4 /* To Host Mail S/W interrupts shift */
+#define I_WR_OOSYNC (1 << 8) /* Write Frame Out Of Sync */
+#define I_RD_OOSYNC (1 << 9) /* Read Frame Out Of Sync */
+#define I_PC (1 << 10) /* descriptor error */
+#define I_PD (1 << 11) /* data error */
+#define I_DE (1 << 12) /* Descriptor protocol Error */
+#define I_RU (1 << 13) /* Receive descriptor Underflow */
+#define I_RO (1 << 14) /* Receive fifo Overflow */
+#define I_XU (1 << 15) /* Transmit fifo Underflow */
+#define I_RI (1 << 16) /* Receive Interrupt */
+#define I_BUSPWR (1 << 17) /* SDIO Bus Power Change (rev 9) */
+#define I_XMTDATA_AVAIL (1 << 23) /* bits in fifo */
+#define I_XI (1 << 24) /* Transmit Interrupt */
+#define I_RF_TERM (1 << 25) /* Read Frame Terminate */
+#define I_WF_TERM (1 << 26) /* Write Frame Terminate */
+#define I_PCMCIA_XU (1 << 27) /* PCMCIA Transmit FIFO Underflow */
+#define I_SBINT (1 << 28) /* sbintstatus Interrupt */
+#define I_CHIPACTIVE (1 << 29) /* chip from doze to active state */
+#define I_SRESET (1 << 30) /* CCCR RES interrupt */
+#define I_IOE2 (1U << 31) /* CCCR IOE2 Bit Changed */
+#define I_ERRORS (I_PC | I_PD | I_DE | I_RU | I_RO | I_XU)
+#define I_DMA (I_RI | I_XI | I_ERRORS)
+
+/* corecontrol */
+#define CC_CISRDY (1 << 0) /* CIS Ready */
+#define CC_BPRESEN (1 << 1) /* CCCR RES signal */
+#define CC_F2RDY (1 << 2) /* set CCCR IOR2 bit */
+#define CC_CLRPADSISO (1 << 3) /* clear SDIO pads isolation */
+#define CC_XMTDATAAVAIL_MODE (1 << 4)
+#define CC_XMTDATAAVAIL_CTRL (1 << 5)
+
+/* SDA_FRAMECTRL */
+#define SFC_RF_TERM (1 << 0) /* Read Frame Terminate */
+#define SFC_WF_TERM (1 << 1) /* Write Frame Terminate */
+#define SFC_CRC4WOOS (1 << 2) /* CRC error for write out of sync */
+#define SFC_ABORTALL (1 << 3) /* Abort all in-progress frames */
+
+/*
+ * Software allocation of To SB Mailbox resources
+ */
+
+/* tosbmailbox bits corresponding to intstatus bits */
+#define SMB_NAK (1 << 0) /* Frame NAK */
+#define SMB_INT_ACK (1 << 1) /* Host Interrupt ACK */
+#define SMB_USE_OOB (1 << 2) /* Use OOB Wakeup */
+#define SMB_DEV_INT (1 << 3) /* Miscellaneous Interrupt */
+
+/* tosbmailboxdata */
+#define SMB_DATA_VERSION_SHIFT 16 /* host protocol version */
+
+/*
+ * Software allocation of To Host Mailbox resources
+ */
+
+/* intstatus bits */
+#define I_HMB_FC_STATE I_HMB_SW0 /* Flow Control State */
+#define I_HMB_FC_CHANGE I_HMB_SW1 /* Flow Control State Changed */
+#define I_HMB_FRAME_IND I_HMB_SW2 /* Frame Indication */
+#define I_HMB_HOST_INT I_HMB_SW3 /* Miscellaneous Interrupt */
+
+/* tohostmailboxdata */
+#define HMB_DATA_NAKHANDLED 1 /* retransmit NAK'd frame */
+#define HMB_DATA_DEVREADY 2 /* talk to host after enable */
+#define HMB_DATA_FC 4 /* per prio flowcontrol update flag */
+#define HMB_DATA_FWREADY 8 /* fw ready for protocol activity */
+
+#define HMB_DATA_FCDATA_MASK 0xff000000
+#define HMB_DATA_FCDATA_SHIFT 24
+
+#define HMB_DATA_VERSION_MASK 0x00ff0000
+#define HMB_DATA_VERSION_SHIFT 16
+
+/*
+ * Software-defined protocol header
+ */
+
+/* Current protocol version */
+#define SDPCM_PROT_VERSION 4
+
+/*
+ * Shared structure between dongle and the host.
+ * The structure contains pointers to trap or assert information.
+ */
+#define SDPCM_SHARED_VERSION 0x0003
+#define SDPCM_SHARED_VERSION_MASK 0x00FF
+#define SDPCM_SHARED_ASSERT_BUILT 0x0100
+#define SDPCM_SHARED_ASSERT 0x0200
+#define SDPCM_SHARED_TRAP 0x0400
+
+/* Space for header read, limit for data packets */
+#define MAX_HDR_READ (1 << 6)
+#define MAX_RX_DATASZ 2048
+
+/* Bump up limit on waiting for HT to account for first startup;
+ * if the image is doing a CRC calculation before programming the PMU
+ * for HT availability, it could take a couple hundred ms more, so
+ * max out at a 1 second (1000000us).
+ */
+#undef PMU_MAX_TRANSITION_DLY
+#define PMU_MAX_TRANSITION_DLY 1000000
+
+/* Value for ChipClockCSR during initial setup */
+#define BRCMF_INIT_CLKCTL1 (SBSDIO_FORCE_HW_CLKREQ_OFF | \
+ SBSDIO_ALP_AVAIL_REQ)
+
+/* Flags for SDH calls */
+#define F2SYNC (SDIO_REQ_4BYTE | SDIO_REQ_FIXED)
+
+#define BRCMF_IDLE_ACTIVE 0 /* Do not request any SD clock change
+ * when idle
+ */
+#define BRCMF_IDLE_INTERVAL 1
+
+#define KSO_WAIT_US 50
+#define MAX_KSO_ATTEMPTS (PMU_MAX_TRANSITION_DLY/KSO_WAIT_US)
+
+/*
+ * Conversion of 802.1D priority to precedence level
+ */
+static uint prio2prec(u32 prio)
+{
+ return (prio == PRIO_8021D_NONE || prio == PRIO_8021D_BE) ?
+ (prio^2) : prio;
+}
+
+#ifdef DEBUG
+/* Device console log buffer state */
+struct brcmf_console {
+ uint count; /* Poll interval msec counter */
+ uint log_addr; /* Log struct address (fixed) */
+ struct rte_log_le log_le; /* Log struct (host copy) */
+ uint bufsize; /* Size of log buffer */
+ u8 *buf; /* Log buffer (host copy) */
+ uint last; /* Last buffer read index */
+};
+
+struct brcmf_trap_info {
+ __le32 type;
+ __le32 epc;
+ __le32 cpsr;
+ __le32 spsr;
+ __le32 r0; /* a1 */
+ __le32 r1; /* a2 */
+ __le32 r2; /* a3 */
+ __le32 r3; /* a4 */
+ __le32 r4; /* v1 */
+ __le32 r5; /* v2 */
+ __le32 r6; /* v3 */
+ __le32 r7; /* v4 */
+ __le32 r8; /* v5 */
+ __le32 r9; /* sb/v6 */
+ __le32 r10; /* sl/v7 */
+ __le32 r11; /* fp/v8 */
+ __le32 r12; /* ip */
+ __le32 r13; /* sp */
+ __le32 r14; /* lr */
+ __le32 pc; /* r15 */
+};
+#endif /* DEBUG */
+
+struct sdpcm_shared {
+ u32 flags;
+ u32 trap_addr;
+ u32 assert_exp_addr;
+ u32 assert_file_addr;
+ u32 assert_line;
+ u32 console_addr; /* Address of struct rte_console */
+ u32 msgtrace_addr;
+ u8 tag[32];
+ u32 brpt_addr;
+};
+
+struct sdpcm_shared_le {
+ __le32 flags;
+ __le32 trap_addr;
+ __le32 assert_exp_addr;
+ __le32 assert_file_addr;
+ __le32 assert_line;
+ __le32 console_addr; /* Address of struct rte_console */
+ __le32 msgtrace_addr;
+ u8 tag[32];
+ __le32 brpt_addr;
+};
+
+/* dongle SDIO bus specific header info */
+struct brcmf_sdio_hdrinfo {
+ u8 seq_num;
+ u8 channel;
+ u16 len;
+ u16 len_left;
+ u16 len_nxtfrm;
+ u8 dat_offset;
+ bool lastfrm;
+ u16 tail_pad;
+};
+
+/*
+ * hold counter variables
+ */
+struct brcmf_sdio_count {
+ uint intrcount; /* Count of device interrupt callbacks */
+ uint lastintrs; /* Count as of last watchdog timer */
+ uint pollcnt; /* Count of active polls */
+ uint regfails; /* Count of R_REG failures */
+ uint tx_sderrs; /* Count of tx attempts with sd errors */
+ uint fcqueued; /* Tx packets that got queued */
+ uint rxrtx; /* Count of rtx requests (NAK to dongle) */
+ uint rx_toolong; /* Receive frames too long to receive */
+ uint rxc_errors; /* SDIO errors when reading control frames */
+ uint rx_hdrfail; /* SDIO errors on header reads */
+ uint rx_badhdr; /* Bad received headers (roosync?) */
+ uint rx_badseq; /* Mismatched rx sequence number */
+ uint fc_rcvd; /* Number of flow-control events received */
+ uint fc_xoff; /* Number which turned on flow-control */
+ uint fc_xon; /* Number which turned off flow-control */
+ uint rxglomfail; /* Failed deglom attempts */
+ uint rxglomframes; /* Number of glom frames (superframes) */
+ uint rxglompkts; /* Number of packets from glom frames */
+ uint f2rxhdrs; /* Number of header reads */
+ uint f2rxdata; /* Number of frame data reads */
+ uint f2txdata; /* Number of f2 frame writes */
+ uint f1regdata; /* Number of f1 register accesses */
+ uint tickcnt; /* Number of watchdog been schedule */
+ ulong tx_ctlerrs; /* Err of sending ctrl frames */
+ ulong tx_ctlpkts; /* Ctrl frames sent to dongle */
+ ulong rx_ctlerrs; /* Err of processing rx ctrl frames */
+ ulong rx_ctlpkts; /* Ctrl frames processed from dongle */
+ ulong rx_readahead_cnt; /* packets where header read-ahead was used */
+};
+
+/* misc chip info needed by some of the routines */
+/* Private data for SDIO bus interaction */
+struct brcmf_sdio {
+ struct brcmf_sdio_dev *sdiodev; /* sdio device handler */
+ struct brcmf_chip *ci; /* Chip info struct */
+
+ u32 ramsize; /* Size of RAM in SOCRAM (bytes) */
+
+ u32 hostintmask; /* Copy of Host Interrupt Mask */
+ atomic_t intstatus; /* Intstatus bits (events) pending */
+ atomic_t fcstate; /* State of dongle flow-control */
+
+ uint blocksize; /* Block size of SDIO transfers */
+ uint roundup; /* Max roundup limit */
+
+ struct pktq txq; /* Queue length used for flow-control */
+ u8 flowcontrol; /* per prio flow control bitmask */
+ u8 tx_seq; /* Transmit sequence number (next) */
+ u8 tx_max; /* Maximum transmit sequence allowed */
+
+ u8 *hdrbuf; /* buffer for handling rx frame */
+ u8 *rxhdr; /* Header of current rx frame (in hdrbuf) */
+ u8 rx_seq; /* Receive sequence number (expected) */
+ struct brcmf_sdio_hdrinfo cur_read;
+ /* info of current read frame */
+ bool rxskip; /* Skip receive (awaiting NAK ACK) */
+ bool rxpending; /* Data frame pending in dongle */
+
+ uint rxbound; /* Rx frames to read before resched */
+ uint txbound; /* Tx frames to send before resched */
+ uint txminmax;
+
+ struct sk_buff *glomd; /* Packet containing glomming descriptor */
+ struct sk_buff_head glom; /* Packet list for glommed superframe */
+ uint glomerr; /* Glom packet read errors */
+
+ u8 *rxbuf; /* Buffer for receiving control packets */
+ uint rxblen; /* Allocated length of rxbuf */
+ u8 *rxctl; /* Aligned pointer into rxbuf */
+ u8 *rxctl_orig; /* pointer for freeing rxctl */
+ uint rxlen; /* Length of valid data in buffer */
+ spinlock_t rxctl_lock; /* protection lock for ctrl frame resources */
+
+ u8 sdpcm_ver; /* Bus protocol reported by dongle */
+
+ bool intr; /* Use interrupts */
+ bool poll; /* Use polling */
+ atomic_t ipend; /* Device interrupt is pending */
+ uint spurious; /* Count of spurious interrupts */
+ uint pollrate; /* Ticks between device polls */
+ uint polltick; /* Tick counter */
+
+#ifdef DEBUG
+ uint console_interval;
+ struct brcmf_console console; /* Console output polling support */
+ uint console_addr; /* Console address from shared struct */
+#endif /* DEBUG */
+
+ uint clkstate; /* State of sd and backplane clock(s) */
+ bool activity; /* Activity flag for clock down */
+ s32 idletime; /* Control for activity timeout */
+ s32 idlecount; /* Activity timeout counter */
+ s32 idleclock; /* How to set bus driver when idle */
+ bool rxflow_mode; /* Rx flow control mode */
+ bool rxflow; /* Is rx flow control on */
+ bool alp_only; /* Don't use HT clock (ALP only) */
+
+ u8 *ctrl_frame_buf;
+ u16 ctrl_frame_len;
+ bool ctrl_frame_stat;
+
+ spinlock_t txq_lock; /* protect bus->txq */
+ struct semaphore tx_seq_lock; /* protect bus->tx_seq */
+ wait_queue_head_t ctrl_wait;
+ wait_queue_head_t dcmd_resp_wait;
+
+ struct timer_list timer;
+ struct completion watchdog_wait;
+ struct task_struct *watchdog_tsk;
+ bool wd_timer_valid;
+ uint save_ms;
+
+ struct workqueue_struct *brcmf_wq;
+ struct work_struct datawork;
+ atomic_t dpc_tskcnt;
+
+ bool txoff; /* Transmit flow-controlled */
+ struct brcmf_sdio_count sdcnt;
+ bool sr_enabled; /* SaveRestore enabled */
+ bool sleeping; /* SDIO bus sleeping */
+
+ u8 tx_hdrlen; /* sdio bus header length for tx packet */
+ bool txglom; /* host tx glomming enable flag */
+ u16 head_align; /* buffer pointer alignment */
+ u16 sgentry_align; /* scatter-gather buffer alignment */
+};
+
+/* clkstate */
+#define CLK_NONE 0
+#define CLK_SDONLY 1
+#define CLK_PENDING 2
+#define CLK_AVAIL 3
+
+#ifdef DEBUG
+static int qcount[NUMPRIO];
+#endif /* DEBUG */
+
+#define DEFAULT_SDIO_DRIVE_STRENGTH 6 /* in milliamps */
+
+#define RETRYCHAN(chan) ((chan) == SDPCM_EVENT_CHANNEL)
+
+/* Retry count for register access failures */
+static const uint retry_limit = 2;
+
+/* Limit on rounding up frames */
+static const uint max_roundup = 512;
+
+#define ALIGNMENT 4
+
+enum brcmf_sdio_frmtype {
+ BRCMF_SDIO_FT_NORMAL,
+ BRCMF_SDIO_FT_SUPER,
+ BRCMF_SDIO_FT_SUB,
+};
+
+#define SDIOD_DRVSTR_KEY(chip, pmu) (((chip) << 16) | (pmu))
+
+/* SDIO Pad drive strength to select value mappings */
+struct sdiod_drive_str {
+ u8 strength; /* Pad Drive Strength in mA */
+ u8 sel; /* Chip-specific select value */
+};
+
+/* SDIO Drive Strength to sel value table for PMU Rev 11 (1.8V) */
+static const struct sdiod_drive_str sdiod_drvstr_tab1_1v8[] = {
+ {32, 0x6},
+ {26, 0x7},
+ {22, 0x4},
+ {16, 0x5},
+ {12, 0x2},
+ {8, 0x3},
+ {4, 0x0},
+ {0, 0x1}
+};
+
+/* SDIO Drive Strength to sel value table for PMU Rev 13 (1.8v) */
+static const struct sdiod_drive_str sdiod_drive_strength_tab5_1v8[] = {
+ {6, 0x7},
+ {5, 0x6},
+ {4, 0x5},
+ {3, 0x4},
+ {2, 0x2},
+ {1, 0x1},
+ {0, 0x0}
+};
+
+/* SDIO Drive Strength to sel value table for PMU Rev 17 (1.8v) */
+static const struct sdiod_drive_str sdiod_drvstr_tab6_1v8[] = {
+ {3, 0x3},
+ {2, 0x2},
+ {1, 0x1},
+ {0, 0x0} };
+
+/* SDIO Drive Strength to sel value table for 43143 PMU Rev 17 (3.3V) */
+static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = {
+ {16, 0x7},
+ {12, 0x5},
+ {8, 0x3},
+ {4, 0x1}
+};
+
+#define BCM43143_FIRMWARE_NAME "brcm/brcmfmac43143-sdio.bin"
+#define BCM43143_NVRAM_NAME "brcm/brcmfmac43143-sdio.txt"
+#define BCM43241B0_FIRMWARE_NAME "brcm/brcmfmac43241b0-sdio.bin"
+#define BCM43241B0_NVRAM_NAME "brcm/brcmfmac43241b0-sdio.txt"
+#define BCM43241B4_FIRMWARE_NAME "brcm/brcmfmac43241b4-sdio.bin"
+#define BCM43241B4_NVRAM_NAME "brcm/brcmfmac43241b4-sdio.txt"
+#define BCM4329_FIRMWARE_NAME "brcm/brcmfmac4329-sdio.bin"
+#define BCM4329_NVRAM_NAME "brcm/brcmfmac4329-sdio.txt"
+#define BCM4330_FIRMWARE_NAME "brcm/brcmfmac4330-sdio.bin"
+#define BCM4330_NVRAM_NAME "brcm/brcmfmac4330-sdio.txt"
+#define BCM4334_FIRMWARE_NAME "brcm/brcmfmac4334-sdio.bin"
+#define BCM4334_NVRAM_NAME "brcm/brcmfmac4334-sdio.txt"
+#define BCM4335_FIRMWARE_NAME "brcm/brcmfmac4335-sdio.bin"
+#define BCM4335_NVRAM_NAME "brcm/brcmfmac4335-sdio.txt"
+#define BCM43362_FIRMWARE_NAME "brcm/brcmfmac43362-sdio.bin"
+#define BCM43362_NVRAM_NAME "brcm/brcmfmac43362-sdio.txt"
+#define BCM4339_FIRMWARE_NAME "brcm/brcmfmac4339-sdio.bin"
+#define BCM4339_NVRAM_NAME "brcm/brcmfmac4339-sdio.txt"
+#define BCM4354_FIRMWARE_NAME "brcm/brcmfmac4354-sdio.bin"
+#define BCM4354_NVRAM_NAME "brcm/brcmfmac4354-sdio.txt"
+
+MODULE_FIRMWARE(BCM43143_FIRMWARE_NAME);
+MODULE_FIRMWARE(BCM43143_NVRAM_NAME);
+MODULE_FIRMWARE(BCM43241B0_FIRMWARE_NAME);
+MODULE_FIRMWARE(BCM43241B0_NVRAM_NAME);
+MODULE_FIRMWARE(BCM43241B4_FIRMWARE_NAME);
+MODULE_FIRMWARE(BCM43241B4_NVRAM_NAME);
+MODULE_FIRMWARE(BCM4329_FIRMWARE_NAME);
+MODULE_FIRMWARE(BCM4329_NVRAM_NAME);
+MODULE_FIRMWARE(BCM4330_FIRMWARE_NAME);
+MODULE_FIRMWARE(BCM4330_NVRAM_NAME);
+MODULE_FIRMWARE(BCM4334_FIRMWARE_NAME);
+MODULE_FIRMWARE(BCM4334_NVRAM_NAME);
+MODULE_FIRMWARE(BCM4335_FIRMWARE_NAME);
+MODULE_FIRMWARE(BCM4335_NVRAM_NAME);
+MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME);
+MODULE_FIRMWARE(BCM43362_NVRAM_NAME);
+MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME);
+MODULE_FIRMWARE(BCM4339_NVRAM_NAME);
+MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME);
+MODULE_FIRMWARE(BCM4354_NVRAM_NAME);
+
+struct brcmf_firmware_names {
+ u32 chipid;
+ u32 revmsk;
+ const char *bin;
+ const char *nv;
+};
+
+enum brcmf_firmware_type {
+ BRCMF_FIRMWARE_BIN,
+ BRCMF_FIRMWARE_NVRAM
+};
+
+#define BRCMF_FIRMWARE_NVRAM(name) \
+ name ## _FIRMWARE_NAME, name ## _NVRAM_NAME
+
+static const struct brcmf_firmware_names brcmf_fwname_data[] = {
+ { BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43143) },
+ { BRCM_CC_43241_CHIP_ID, 0x0000001F, BRCMF_FIRMWARE_NVRAM(BCM43241B0) },
+ { BRCM_CC_43241_CHIP_ID, 0xFFFFFFE0, BRCMF_FIRMWARE_NVRAM(BCM43241B4) },
+ { BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4329) },
+ { BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4330) },
+ { BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) },
+ { BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) },
+ { BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) },
+ { BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) },
+ { BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) }
+};
+
+static int brcmf_sdio_get_fwnames(struct brcmf_chip *ci,
+ struct brcmf_sdio_dev *sdiodev)
+{
+ int i;
+ uint fw_len, nv_len;
+ char end;
+
+ for (i = 0; i < ARRAY_SIZE(brcmf_fwname_data); i++) {
+ if (brcmf_fwname_data[i].chipid == ci->chip &&
+ brcmf_fwname_data[i].revmsk & BIT(ci->chiprev))
+ break;
+ }
+
+ if (i == ARRAY_SIZE(brcmf_fwname_data)) {
+ brcmf_err("Unknown chipid %d [%d]\n", ci->chip, ci->chiprev);
+ return -ENODEV;
+ }
+
+ fw_len = sizeof(sdiodev->fw_name) - 1;
+ nv_len = sizeof(sdiodev->nvram_name) - 1;
+ /* check if firmware path is provided by module parameter */
+ if (brcmf_firmware_path[0] != '\0') {
+ strncpy(sdiodev->fw_name, brcmf_firmware_path, fw_len);
+ strncpy(sdiodev->nvram_name, brcmf_firmware_path, nv_len);
+ fw_len -= strlen(sdiodev->fw_name);
+ nv_len -= strlen(sdiodev->nvram_name);
+
+ end = brcmf_firmware_path[strlen(brcmf_firmware_path) - 1];
+ if (end != '/') {
+ strncat(sdiodev->fw_name, "/", fw_len);
+ strncat(sdiodev->nvram_name, "/", nv_len);
+ fw_len--;
+ nv_len--;
+ }
+ }
+ strncat(sdiodev->fw_name, brcmf_fwname_data[i].bin, fw_len);
+ strncat(sdiodev->nvram_name, brcmf_fwname_data[i].nv, nv_len);
+
+ return 0;
+}
+
+static void pkt_align(struct sk_buff *p, int len, int align)
+{
+ uint datalign;
+ datalign = (unsigned long)(p->data);
+ datalign = roundup(datalign, (align)) - datalign;
+ if (datalign)
+ skb_pull(p, datalign);
+ __skb_trim(p, len);
+}
+
+/* To check if there's window offered */
+static bool data_ok(struct brcmf_sdio *bus)
+{
+ return (u8)(bus->tx_max - bus->tx_seq) != 0 &&
+ ((u8)(bus->tx_max - bus->tx_seq) & 0x80) == 0;
+}
+
+/*
+ * Reads a register in the SDIO hardware block. This block occupies a series of
+ * adresses on the 32 bit backplane bus.
+ */
+static int r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
+{
+ struct brcmf_core *core;
+ int ret;
+
+ core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
+ *regvar = brcmf_sdiod_regrl(bus->sdiodev, core->base + offset, &ret);
+
+ return ret;
+}
+
+static int w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset)
+{
+ struct brcmf_core *core;
+ int ret;
+
+ core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
+ brcmf_sdiod_regwl(bus->sdiodev, core->base + reg_offset, regval, &ret);
+
+ return ret;
+}
+
+static int
+brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
+{
+ u8 wr_val = 0, rd_val, cmp_val, bmask;
+ int err = 0;
+ int try_cnt = 0;
+
+ brcmf_dbg(TRACE, "Enter: on=%d\n", on);
+
+ wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
+ /* 1st KSO write goes to AOS wake up core if device is asleep */
+ brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
+ wr_val, &err);
+
+ if (on) {
+ /* device WAKEUP through KSO:
+ * write bit 0 & read back until
+ * both bits 0 (kso bit) & 1 (dev on status) are set
+ */
+ cmp_val = SBSDIO_FUNC1_SLEEPCSR_KSO_MASK |
+ SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK;
+ bmask = cmp_val;
+ usleep_range(2000, 3000);
+ } else {
+ /* Put device to sleep, turn off KSO */
+ cmp_val = 0;
+ /* only check for bit0, bit1(dev on status) may not
+ * get cleared right away
+ */
+ bmask = SBSDIO_FUNC1_SLEEPCSR_KSO_MASK;
+ }
+
+ do {
+ /* reliable KSO bit set/clr:
+ * the sdiod sleep write access is synced to PMU 32khz clk
+ * just one write attempt may fail,
+ * read it back until it matches written value
+ */
+ rd_val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
+ &err);
+ if (((rd_val & bmask) == cmp_val) && !err)
+ break;
+
+ udelay(KSO_WAIT_US);
+ brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
+ wr_val, &err);
+ } while (try_cnt++ < MAX_KSO_ATTEMPTS);
+
+ if (try_cnt > 2)
+ brcmf_dbg(SDIO, "try_cnt=%d rd_val=0x%x err=%d\n", try_cnt,
+ rd_val, err);
+
+ if (try_cnt > MAX_KSO_ATTEMPTS)
+ brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err);
+
+ return err;
+}
+
+#define HOSTINTMASK (I_HMB_SW_MASK | I_CHIPACTIVE)
+
+/* Turn backplane clock on or off */
+static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
+{
+ int err;
+ u8 clkctl, clkreq, devctl;
+ unsigned long timeout;
+
+ brcmf_dbg(SDIO, "Enter\n");
+
+ clkctl = 0;
+
+ if (bus->sr_enabled) {
+ bus->clkstate = (on ? CLK_AVAIL : CLK_SDONLY);
+ return 0;
+ }
+
+ if (on) {
+ /* Request HT Avail */
+ clkreq =
+ bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ;
+
+ brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ clkreq, &err);
+ if (err) {
+ brcmf_err("HT Avail request error: %d\n", err);
+ return -EBADE;
+ }
+
+ /* Check current status */
+ clkctl = brcmf_sdiod_regrb(bus->sdiodev,
+ SBSDIO_FUNC1_CHIPCLKCSR, &err);
+ if (err) {
+ brcmf_err("HT Avail read error: %d\n", err);
+ return -EBADE;
+ }
+
+ /* Go to pending and await interrupt if appropriate */
+ if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) {
+ /* Allow only clock-available interrupt */
+ devctl = brcmf_sdiod_regrb(bus->sdiodev,
+ SBSDIO_DEVICE_CTL, &err);
+ if (err) {
+ brcmf_err("Devctl error setting CA: %d\n",
+ err);
+ return -EBADE;
+ }
+
+ devctl |= SBSDIO_DEVCTL_CA_INT_ONLY;
+ brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+ devctl, &err);
+ brcmf_dbg(SDIO, "CLKCTL: set PENDING\n");
+ bus->clkstate = CLK_PENDING;
+
+ return 0;
+ } else if (bus->clkstate == CLK_PENDING) {
+ /* Cancel CA-only interrupt filter */
+ devctl = brcmf_sdiod_regrb(bus->sdiodev,
+ SBSDIO_DEVICE_CTL, &err);
+ devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
+ brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+ devctl, &err);
+ }
+
+ /* Otherwise, wait here (polling) for HT Avail */
+ timeout = jiffies +
+ msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000);
+ while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
+ clkctl = brcmf_sdiod_regrb(bus->sdiodev,
+ SBSDIO_FUNC1_CHIPCLKCSR,
+ &err);
+ if (time_after(jiffies, timeout))
+ break;
+ else
+ usleep_range(5000, 10000);
+ }
+ if (err) {
+ brcmf_err("HT Avail request error: %d\n", err);
+ return -EBADE;
+ }
+ if (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
+ brcmf_err("HT Avail timeout (%d): clkctl 0x%02x\n",
+ PMU_MAX_TRANSITION_DLY, clkctl);
+ return -EBADE;
+ }
+
+ /* Mark clock available */
+ bus->clkstate = CLK_AVAIL;
+ brcmf_dbg(SDIO, "CLKCTL: turned ON\n");
+
+#if defined(DEBUG)
+ if (!bus->alp_only) {
+ if (SBSDIO_ALPONLY(clkctl))
+ brcmf_err("HT Clock should be on\n");
+ }
+#endif /* defined (DEBUG) */
+
+ } else {
+ clkreq = 0;
+
+ if (bus->clkstate == CLK_PENDING) {
+ /* Cancel CA-only interrupt filter */
+ devctl = brcmf_sdiod_regrb(bus->sdiodev,
+ SBSDIO_DEVICE_CTL, &err);
+ devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
+ brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+ devctl, &err);
+ }
+
+ bus->clkstate = CLK_SDONLY;
+ brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ clkreq, &err);
+ brcmf_dbg(SDIO, "CLKCTL: turned OFF\n");
+ if (err) {
+ brcmf_err("Failed access turning clock off: %d\n",
+ err);
+ return -EBADE;
+ }
+ }
+ return 0;
+}
+
+/* Change idle/active SD state */
+static int brcmf_sdio_sdclk(struct brcmf_sdio *bus, bool on)
+{
+ brcmf_dbg(SDIO, "Enter\n");
+
+ if (on)
+ bus->clkstate = CLK_SDONLY;
+ else
+ bus->clkstate = CLK_NONE;
+
+ return 0;
+}
+
+/* Transition SD and backplane clock readiness */
+static int brcmf_sdio_clkctl(struct brcmf_sdio *bus, uint target, bool pendok)
+{
+#ifdef DEBUG
+ uint oldstate = bus->clkstate;
+#endif /* DEBUG */
+
+ brcmf_dbg(SDIO, "Enter\n");
+
+ /* Early exit if we're already there */
+ if (bus->clkstate == target) {
+ if (target == CLK_AVAIL) {
+ brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
+ bus->activity = true;
+ }
+ return 0;
+ }
+
+ switch (target) {
+ case CLK_AVAIL:
+ /* Make sure SD clock is available */
+ if (bus->clkstate == CLK_NONE)
+ brcmf_sdio_sdclk(bus, true);
+ /* Now request HT Avail on the backplane */
+ brcmf_sdio_htclk(bus, true, pendok);
+ brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
+ bus->activity = true;
+ break;
+
+ case CLK_SDONLY:
+ /* Remove HT request, or bring up SD clock */
+ if (bus->clkstate == CLK_NONE)
+ brcmf_sdio_sdclk(bus, true);
+ else if (bus->clkstate == CLK_AVAIL)
+ brcmf_sdio_htclk(bus, false, false);
+ else
+ brcmf_err("request for %d -> %d\n",
+ bus->clkstate, target);
+ brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
+ break;
+
+ case CLK_NONE:
+ /* Make sure to remove HT request */
+ if (bus->clkstate == CLK_AVAIL)
+ brcmf_sdio_htclk(bus, false, false);
+ /* Now remove the SD clock */
+ brcmf_sdio_sdclk(bus, false);
+ brcmf_sdio_wd_timer(bus, 0);
+ break;
+ }
+#ifdef DEBUG
+ brcmf_dbg(SDIO, "%d -> %d\n", oldstate, bus->clkstate);
+#endif /* DEBUG */
+
+ return 0;
+}
+
+static int
+brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
+{
+ int err = 0;
+ u8 clkcsr;
+
+ brcmf_dbg(SDIO, "Enter: request %s currently %s\n",
+ (sleep ? "SLEEP" : "WAKE"),
+ (bus->sleeping ? "SLEEP" : "WAKE"));
+
+ /* If SR is enabled control bus state with KSO */
+ if (bus->sr_enabled) {
+ /* Done if we're already in the requested state */
+ if (sleep == bus->sleeping)
+ goto end;
+
+ /* Going to sleep */
+ if (sleep) {
+ /* Don't sleep if something is pending */
+ if (atomic_read(&bus->intstatus) ||
+ atomic_read(&bus->ipend) > 0 ||
+ (!atomic_read(&bus->fcstate) &&
+ brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) &&
+ data_ok(bus))) {
+ err = -EBUSY;
+ goto done;
+ }
+
+ clkcsr = brcmf_sdiod_regrb(bus->sdiodev,
+ SBSDIO_FUNC1_CHIPCLKCSR,
+ &err);
+ if ((clkcsr & SBSDIO_CSR_MASK) == 0) {
+ brcmf_dbg(SDIO, "no clock, set ALP\n");
+ brcmf_sdiod_regwb(bus->sdiodev,
+ SBSDIO_FUNC1_CHIPCLKCSR,
+ SBSDIO_ALP_AVAIL_REQ, &err);
+ }
+ err = brcmf_sdio_kso_control(bus, false);
+ /* disable watchdog */
+ if (!err)
+ brcmf_sdio_wd_timer(bus, 0);
+ } else {
+ bus->idlecount = 0;
+ err = brcmf_sdio_kso_control(bus, true);
+ }
+ if (!err) {
+ /* Change state */
+ bus->sleeping = sleep;
+ brcmf_dbg(SDIO, "new state %s\n",
+ (sleep ? "SLEEP" : "WAKE"));
+ } else {
+ brcmf_err("error while changing bus sleep state %d\n",
+ err);
+ goto done;
+ }
+ }
+
+end:
+ /* control clocks */
+ if (sleep) {
+ if (!bus->sr_enabled)
+ brcmf_sdio_clkctl(bus, CLK_NONE, pendok);
+ } else {
+ brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok);
+ }
+done:
+ brcmf_dbg(SDIO, "Exit: err=%d\n", err);
+ return err;
+
+}
+
+#ifdef DEBUG
+static inline bool brcmf_sdio_valid_shared_address(u32 addr)
+{
+ return !(addr == 0 || ((~addr >> 16) & 0xffff) == (addr & 0xffff));
+}
+
+static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
+ struct sdpcm_shared *sh)
+{
+ u32 addr;
+ int rv;
+ u32 shaddr = 0;
+ struct sdpcm_shared_le sh_le;
+ __le32 addr_le;
+
+ shaddr = bus->ci->rambase + bus->ramsize - 4;
+
+ /*
+ * Read last word in socram to determine
+ * address of sdpcm_shared structure
+ */
+ sdio_claim_host(bus->sdiodev->func[1]);
+ brcmf_sdio_bus_sleep(bus, false, false);
+ rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4);
+ sdio_release_host(bus->sdiodev->func[1]);
+ if (rv < 0)
+ return rv;
+
+ addr = le32_to_cpu(addr_le);
+
+ brcmf_dbg(SDIO, "sdpcm_shared address 0x%08X\n", addr);
+
+ /*
+ * Check if addr is valid.
+ * NVRAM length at the end of memory should have been overwritten.
+ */
+ if (!brcmf_sdio_valid_shared_address(addr)) {
+ brcmf_err("invalid sdpcm_shared address 0x%08X\n",
+ addr);
+ return -EINVAL;
+ }
+
+ /* Read hndrte_shared structure */
+ rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le,
+ sizeof(struct sdpcm_shared_le));
+ if (rv < 0)
+ return rv;
+
+ /* Endianness */
+ sh->flags = le32_to_cpu(sh_le.flags);
+ sh->trap_addr = le32_to_cpu(sh_le.trap_addr);
+ sh->assert_exp_addr = le32_to_cpu(sh_le.assert_exp_addr);
+ sh->assert_file_addr = le32_to_cpu(sh_le.assert_file_addr);
+ sh->assert_line = le32_to_cpu(sh_le.assert_line);
+ sh->console_addr = le32_to_cpu(sh_le.console_addr);
+ sh->msgtrace_addr = le32_to_cpu(sh_le.msgtrace_addr);
+
+ if ((sh->flags & SDPCM_SHARED_VERSION_MASK) > SDPCM_SHARED_VERSION) {
+ brcmf_err("sdpcm shared version unsupported: dhd %d dongle %d\n",
+ SDPCM_SHARED_VERSION,
+ sh->flags & SDPCM_SHARED_VERSION_MASK);
+ return -EPROTO;
+ }
+
+ return 0;
+}
+
+static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus)
+{
+ struct sdpcm_shared sh;
+
+ if (brcmf_sdio_readshared(bus, &sh) == 0)
+ bus->console_addr = sh.console_addr;
+}
+#else
+static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus)
+{
+}
+#endif /* DEBUG */
+
+static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
+{
+ u32 intstatus = 0;
+ u32 hmb_data;
+ u8 fcbits;
+ int ret;
+
+ brcmf_dbg(SDIO, "Enter\n");
+
+ /* Read mailbox data and ack that we did so */
+ ret = r_sdreg32(bus, &hmb_data,
+ offsetof(struct sdpcmd_regs, tohostmailboxdata));
+
+ if (ret == 0)
+ w_sdreg32(bus, SMB_INT_ACK,
+ offsetof(struct sdpcmd_regs, tosbmailbox));
+ bus->sdcnt.f1regdata += 2;
+
+ /* Dongle recomposed rx frames, accept them again */
+ if (hmb_data & HMB_DATA_NAKHANDLED) {
+ brcmf_dbg(SDIO, "Dongle reports NAK handled, expect rtx of %d\n",
+ bus->rx_seq);
+ if (!bus->rxskip)
+ brcmf_err("unexpected NAKHANDLED!\n");
+
+ bus->rxskip = false;
+ intstatus |= I_HMB_FRAME_IND;
+ }
+
+ /*
+ * DEVREADY does not occur with gSPI.
+ */
+ if (hmb_data & (HMB_DATA_DEVREADY | HMB_DATA_FWREADY)) {
+ bus->sdpcm_ver =
+ (hmb_data & HMB_DATA_VERSION_MASK) >>
+ HMB_DATA_VERSION_SHIFT;
+ if (bus->sdpcm_ver != SDPCM_PROT_VERSION)
+ brcmf_err("Version mismatch, dongle reports %d, "
+ "expecting %d\n",
+ bus->sdpcm_ver, SDPCM_PROT_VERSION);
+ else
+ brcmf_dbg(SDIO, "Dongle ready, protocol version %d\n",
+ bus->sdpcm_ver);
+
+ /*
+ * Retrieve console state address now that firmware should have
+ * updated it.
+ */
+ brcmf_sdio_get_console_addr(bus);
+ }
+
+ /*
+ * Flow Control has been moved into the RX headers and this out of band
+ * method isn't used any more.
+ * remaining backward compatible with older dongles.
+ */
+ if (hmb_data & HMB_DATA_FC) {
+ fcbits = (hmb_data & HMB_DATA_FCDATA_MASK) >>
+ HMB_DATA_FCDATA_SHIFT;
+
+ if (fcbits & ~bus->flowcontrol)
+ bus->sdcnt.fc_xoff++;
+
+ if (bus->flowcontrol & ~fcbits)
+ bus->sdcnt.fc_xon++;
+
+ bus->sdcnt.fc_rcvd++;
+ bus->flowcontrol = fcbits;
+ }
+
+ /* Shouldn't be any others */
+ if (hmb_data & ~(HMB_DATA_DEVREADY |
+ HMB_DATA_NAKHANDLED |
+ HMB_DATA_FC |
+ HMB_DATA_FWREADY |
+ HMB_DATA_FCDATA_MASK | HMB_DATA_VERSION_MASK))
+ brcmf_err("Unknown mailbox data content: 0x%02x\n",
+ hmb_data);
+
+ return intstatus;
+}
+
+static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
+{
+ uint retries = 0;
+ u16 lastrbc;
+ u8 hi, lo;
+ int err;
+
+ brcmf_err("%sterminate frame%s\n",
+ abort ? "abort command, " : "",
+ rtx ? ", send NAK" : "");
+
+ if (abort)
+ brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2);
+
+ brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
+ SFC_RF_TERM, &err);
+ bus->sdcnt.f1regdata++;
+
+ /* Wait until the packet has been flushed (device/FIFO stable) */
+ for (lastrbc = retries = 0xffff; retries > 0; retries--) {
+ hi = brcmf_sdiod_regrb(bus->sdiodev,
+ SBSDIO_FUNC1_RFRAMEBCHI, &err);
+ lo = brcmf_sdiod_regrb(bus->sdiodev,
+ SBSDIO_FUNC1_RFRAMEBCLO, &err);
+ bus->sdcnt.f1regdata += 2;
+
+ if ((hi == 0) && (lo == 0))
+ break;
+
+ if ((hi > (lastrbc >> 8)) && (lo > (lastrbc & 0x00ff))) {
+ brcmf_err("count growing: last 0x%04x now 0x%04x\n",
+ lastrbc, (hi << 8) + lo);
+ }
+ lastrbc = (hi << 8) + lo;
+ }
+
+ if (!retries)
+ brcmf_err("count never zeroed: last 0x%04x\n", lastrbc);
+ else
+ brcmf_dbg(SDIO, "flush took %d iterations\n", 0xffff - retries);
+
+ if (rtx) {
+ bus->sdcnt.rxrtx++;
+ err = w_sdreg32(bus, SMB_NAK,
+ offsetof(struct sdpcmd_regs, tosbmailbox));
+
+ bus->sdcnt.f1regdata++;
+ if (err == 0)
+ bus->rxskip = true;
+ }
+
+ /* Clear partial in any case */
+ bus->cur_read.len = 0;
+}
+
+static void brcmf_sdio_txfail(struct brcmf_sdio *bus)
+{
+ struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
+ u8 i, hi, lo;
+
+ /* On failure, abort the command and terminate the frame */
+ brcmf_err("sdio error, abort command and terminate frame\n");
+ bus->sdcnt.tx_sderrs++;
+
+ brcmf_sdiod_abort(sdiodev, SDIO_FUNC_2);
+ brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL);
+ bus->sdcnt.f1regdata++;
+
+ for (i = 0; i < 3; i++) {
+ hi = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCHI, NULL);
+ lo = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCLO, NULL);
+ bus->sdcnt.f1regdata += 2;
+ if ((hi == 0) && (lo == 0))
+ break;
+ }
+}
+
+/* return total length of buffer chain */
+static uint brcmf_sdio_glom_len(struct brcmf_sdio *bus)
+{
+ struct sk_buff *p;
+ uint total;
+
+ total = 0;
+ skb_queue_walk(&bus->glom, p)
+ total += p->len;
+ return total;
+}
+
+static void brcmf_sdio_free_glom(struct brcmf_sdio *bus)
+{
+ struct sk_buff *cur, *next;
+
+ skb_queue_walk_safe(&bus->glom, cur, next) {
+ skb_unlink(cur, &bus->glom);
+ brcmu_pkt_buf_free_skb(cur);
+ }
+}
+
+/**
+ * brcmfmac sdio bus specific header
+ * This is the lowest layer header wrapped on the packets transmitted between
+ * host and WiFi dongle which contains information needed for SDIO core and
+ * firmware
+ *
+ * It consists of 3 parts: hardware header, hardware extension header and
+ * software header
+ * hardware header (frame tag) - 4 bytes
+ * Byte 0~1: Frame length
+ * Byte 2~3: Checksum, bit-wise inverse of frame length
+ * hardware extension header - 8 bytes
+ * Tx glom mode only, N/A for Rx or normal Tx
+ * Byte 0~1: Packet length excluding hw frame tag
+ * Byte 2: Reserved
+ * Byte 3: Frame flags, bit 0: last frame indication
+ * Byte 4~5: Reserved
+ * Byte 6~7: Tail padding length
+ * software header - 8 bytes
+ * Byte 0: Rx/Tx sequence number
+ * Byte 1: 4 MSB Channel number, 4 LSB arbitrary flag
+ * Byte 2: Length of next data frame, reserved for Tx
+ * Byte 3: Data offset
+ * Byte 4: Flow control bits, reserved for Tx
+ * Byte 5: Maximum Sequence number allowed by firmware for Tx, N/A for Tx packet
+ * Byte 6~7: Reserved
+ */
+#define SDPCM_HWHDR_LEN 4
+#define SDPCM_HWEXT_LEN 8
+#define SDPCM_SWHDR_LEN 8
+#define SDPCM_HDRLEN (SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN)
+/* software header */
+#define SDPCM_SEQ_MASK 0x000000ff
+#define SDPCM_SEQ_WRAP 256
+#define SDPCM_CHANNEL_MASK 0x00000f00
+#define SDPCM_CHANNEL_SHIFT 8
+#define SDPCM_CONTROL_CHANNEL 0 /* Control */
+#define SDPCM_EVENT_CHANNEL 1 /* Asyc Event Indication */
+#define SDPCM_DATA_CHANNEL 2 /* Data Xmit/Recv */
+#define SDPCM_GLOM_CHANNEL 3 /* Coalesced packets */
+#define SDPCM_TEST_CHANNEL 15 /* Test/debug packets */
+#define SDPCM_GLOMDESC(p) (((u8 *)p)[1] & 0x80)
+#define SDPCM_NEXTLEN_MASK 0x00ff0000
+#define SDPCM_NEXTLEN_SHIFT 16
+#define SDPCM_DOFFSET_MASK 0xff000000
+#define SDPCM_DOFFSET_SHIFT 24
+#define SDPCM_FCMASK_MASK 0x000000ff
+#define SDPCM_WINDOW_MASK 0x0000ff00
+#define SDPCM_WINDOW_SHIFT 8
+
+static inline u8 brcmf_sdio_getdatoffset(u8 *swheader)
+{
+ u32 hdrvalue;
+ hdrvalue = *(u32 *)swheader;
+ return (u8)((hdrvalue & SDPCM_DOFFSET_MASK) >> SDPCM_DOFFSET_SHIFT);
+}
+
+static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header,
+ struct brcmf_sdio_hdrinfo *rd,
+ enum brcmf_sdio_frmtype type)
+{
+ u16 len, checksum;
+ u8 rx_seq, fc, tx_seq_max;
+ u32 swheader;
+
+ trace_brcmf_sdpcm_hdr(SDPCM_RX, header);
+
+ /* hw header */
+ len = get_unaligned_le16(header);
+ checksum = get_unaligned_le16(header + sizeof(u16));
+ /* All zero means no more to read */
+ if (!(len | checksum)) {
+ bus->rxpending = false;
+ return -ENODATA;
+ }
+ if ((u16)(~(len ^ checksum))) {
+ brcmf_err("HW header checksum error\n");
+ bus->sdcnt.rx_badhdr++;
+ brcmf_sdio_rxfail(bus, false, false);
+ return -EIO;
+ }
+ if (len < SDPCM_HDRLEN) {
+ brcmf_err("HW header length error\n");
+ return -EPROTO;
+ }
+ if (type == BRCMF_SDIO_FT_SUPER &&
+ (roundup(len, bus->blocksize) != rd->len)) {
+ brcmf_err("HW superframe header length error\n");
+ return -EPROTO;
+ }
+ if (type == BRCMF_SDIO_FT_SUB && len > rd->len) {
+ brcmf_err("HW subframe header length error\n");
+ return -EPROTO;
+ }
+ rd->len = len;
+
+ /* software header */
+ header += SDPCM_HWHDR_LEN;
+ swheader = le32_to_cpu(*(__le32 *)header);
+ if (type == BRCMF_SDIO_FT_SUPER && SDPCM_GLOMDESC(header)) {
+ brcmf_err("Glom descriptor found in superframe head\n");
+ rd->len = 0;
+ return -EINVAL;
+ }
+ rx_seq = (u8)(swheader & SDPCM_SEQ_MASK);
+ rd->channel = (swheader & SDPCM_CHANNEL_MASK) >> SDPCM_CHANNEL_SHIFT;
+ if (len > MAX_RX_DATASZ && rd->channel != SDPCM_CONTROL_CHANNEL &&
+ type != BRCMF_SDIO_FT_SUPER) {
+ brcmf_err("HW header length too long\n");
+ bus->sdcnt.rx_toolong++;
+ brcmf_sdio_rxfail(bus, false, false);
+ rd->len = 0;
+ return -EPROTO;
+ }
+ if (type == BRCMF_SDIO_FT_SUPER && rd->channel != SDPCM_GLOM_CHANNEL) {
+ brcmf_err("Wrong channel for superframe\n");
+ rd->len = 0;
+ return -EINVAL;
+ }
+ if (type == BRCMF_SDIO_FT_SUB && rd->channel != SDPCM_DATA_CHANNEL &&
+ rd->channel != SDPCM_EVENT_CHANNEL) {
+ brcmf_err("Wrong channel for subframe\n");
+ rd->len = 0;
+ return -EINVAL;
+ }
+ rd->dat_offset = brcmf_sdio_getdatoffset(header);
+ if (rd->dat_offset < SDPCM_HDRLEN || rd->dat_offset > rd->len) {
+ brcmf_err("seq %d: bad data offset\n", rx_seq);
+ bus->sdcnt.rx_badhdr++;
+ brcmf_sdio_rxfail(bus, false, false);
+ rd->len = 0;
+ return -ENXIO;
+ }
+ if (rd->seq_num != rx_seq) {
+ brcmf_err("seq %d: sequence number error, expect %d\n",
+ rx_seq, rd->seq_num);
+ bus->sdcnt.rx_badseq++;
+ rd->seq_num = rx_seq;
+ }
+ /* no need to check the reset for subframe */
+ if (type == BRCMF_SDIO_FT_SUB)
+ return 0;
+ rd->len_nxtfrm = (swheader & SDPCM_NEXTLEN_MASK) >> SDPCM_NEXTLEN_SHIFT;
+ if (rd->len_nxtfrm << 4 > MAX_RX_DATASZ) {
+ /* only warm for NON glom packet */
+ if (rd->channel != SDPCM_GLOM_CHANNEL)
+ brcmf_err("seq %d: next length error\n", rx_seq);
+ rd->len_nxtfrm = 0;
+ }
+ swheader = le32_to_cpu(*(__le32 *)(header + 4));
+ fc = swheader & SDPCM_FCMASK_MASK;
+ if (bus->flowcontrol != fc) {
+ if (~bus->flowcontrol & fc)
+ bus->sdcnt.fc_xoff++;
+ if (bus->flowcontrol & ~fc)
+ bus->sdcnt.fc_xon++;
+ bus->sdcnt.fc_rcvd++;
+ bus->flowcontrol = fc;
+ }
+ tx_seq_max = (swheader & SDPCM_WINDOW_MASK) >> SDPCM_WINDOW_SHIFT;
+ if ((u8)(tx_seq_max - bus->tx_seq) > 0x40) {
+ brcmf_err("seq %d: max tx seq number error\n", rx_seq);
+ tx_seq_max = bus->tx_seq + 2;
+ }
+ bus->tx_max = tx_seq_max;
+
+ return 0;
+}
+
+static inline void brcmf_sdio_update_hwhdr(u8 *header, u16 frm_length)
+{
+ *(__le16 *)header = cpu_to_le16(frm_length);
+ *(((__le16 *)header) + 1) = cpu_to_le16(~frm_length);
+}
+
+static void brcmf_sdio_hdpack(struct brcmf_sdio *bus, u8 *header,
+ struct brcmf_sdio_hdrinfo *hd_info)
+{
+ u32 hdrval;
+ u8 hdr_offset;
+
+ brcmf_sdio_update_hwhdr(header, hd_info->len);
+ hdr_offset = SDPCM_HWHDR_LEN;
+
+ if (bus->txglom) {
+ hdrval = (hd_info->len - hdr_offset) | (hd_info->lastfrm << 24);
+ *((__le32 *)(header + hdr_offset)) = cpu_to_le32(hdrval);
+ hdrval = (u16)hd_info->tail_pad << 16;
+ *(((__le32 *)(header + hdr_offset)) + 1) = cpu_to_le32(hdrval);
+ hdr_offset += SDPCM_HWEXT_LEN;
+ }
+
+ hdrval = hd_info->seq_num;
+ hdrval |= (hd_info->channel << SDPCM_CHANNEL_SHIFT) &
+ SDPCM_CHANNEL_MASK;
+ hdrval |= (hd_info->dat_offset << SDPCM_DOFFSET_SHIFT) &
+ SDPCM_DOFFSET_MASK;
+ *((__le32 *)(header + hdr_offset)) = cpu_to_le32(hdrval);
+ *(((__le32 *)(header + hdr_offset)) + 1) = 0;
+ trace_brcmf_sdpcm_hdr(SDPCM_TX + !!(bus->txglom), header);
+}
+
+static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq)
+{
+ u16 dlen, totlen;
+ u8 *dptr, num = 0;
+ u16 sublen;
+ struct sk_buff *pfirst, *pnext;
+
+ int errcode;
+ u8 doff, sfdoff;
+
+ struct brcmf_sdio_hdrinfo rd_new;
+
+ /* If packets, issue read(s) and send up packet chain */
+ /* Return sequence numbers consumed? */
+
+ brcmf_dbg(SDIO, "start: glomd %p glom %p\n",
+ bus->glomd, skb_peek(&bus->glom));
+
+ /* If there's a descriptor, generate the packet chain */
+ if (bus->glomd) {
+ pfirst = pnext = NULL;
+ dlen = (u16) (bus->glomd->len);
+ dptr = bus->glomd->data;
+ if (!dlen || (dlen & 1)) {
+ brcmf_err("bad glomd len(%d), ignore descriptor\n",
+ dlen);
+ dlen = 0;
+ }
+
+ for (totlen = num = 0; dlen; num++) {
+ /* Get (and move past) next length */
+ sublen = get_unaligned_le16(dptr);
+ dlen -= sizeof(u16);
+ dptr += sizeof(u16);
+ if ((sublen < SDPCM_HDRLEN) ||
+ ((num == 0) && (sublen < (2 * SDPCM_HDRLEN)))) {
+ brcmf_err("descriptor len %d bad: %d\n",
+ num, sublen);
+ pnext = NULL;
+ break;
+ }
+ if (sublen % bus->sgentry_align) {
+ brcmf_err("sublen %d not multiple of %d\n",
+ sublen, bus->sgentry_align);
+ }
+ totlen += sublen;
+
+ /* For last frame, adjust read len so total
+ is a block multiple */
+ if (!dlen) {
+ sublen +=
+ (roundup(totlen, bus->blocksize) - totlen);
+ totlen = roundup(totlen, bus->blocksize);
+ }
+
+ /* Allocate/chain packet for next subframe */
+ pnext = brcmu_pkt_buf_get_skb(sublen + bus->sgentry_align);
+ if (pnext == NULL) {
+ brcmf_err("bcm_pkt_buf_get_skb failed, num %d len %d\n",
+ num, sublen);
+ break;
+ }
+ skb_queue_tail(&bus->glom, pnext);
+
+ /* Adhere to start alignment requirements */
+ pkt_align(pnext, sublen, bus->sgentry_align);
+ }
+
+ /* If all allocations succeeded, save packet chain
+ in bus structure */
+ if (pnext) {
+ brcmf_dbg(GLOM, "allocated %d-byte packet chain for %d subframes\n",
+ totlen, num);
+ if (BRCMF_GLOM_ON() && bus->cur_read.len &&
+ totlen != bus->cur_read.len) {
+ brcmf_dbg(GLOM, "glomdesc mismatch: nextlen %d glomdesc %d rxseq %d\n",
+ bus->cur_read.len, totlen, rxseq);
+ }
+ pfirst = pnext = NULL;
+ } else {
+ brcmf_sdio_free_glom(bus);
+ num = 0;
+ }
+
+ /* Done with descriptor packet */
+ brcmu_pkt_buf_free_skb(bus->glomd);
+ bus->glomd = NULL;
+ bus->cur_read.len = 0;
+ }
+
+ /* Ok -- either we just generated a packet chain,
+ or had one from before */
+ if (!skb_queue_empty(&bus->glom)) {
+ if (BRCMF_GLOM_ON()) {
+ brcmf_dbg(GLOM, "try superframe read, packet chain:\n");
+ skb_queue_walk(&bus->glom, pnext) {
+ brcmf_dbg(GLOM, " %p: %p len 0x%04x (%d)\n",
+ pnext, (u8 *) (pnext->data),
+ pnext->len, pnext->len);
+ }
+ }
+
+ pfirst = skb_peek(&bus->glom);
+ dlen = (u16) brcmf_sdio_glom_len(bus);
+
+ /* Do an SDIO read for the superframe. Configurable iovar to
+ * read directly into the chained packet, or allocate a large
+ * packet and and copy into the chain.
+ */
+ sdio_claim_host(bus->sdiodev->func[1]);
+ errcode = brcmf_sdiod_recv_chain(bus->sdiodev,
+ &bus->glom, dlen);
+ sdio_release_host(bus->sdiodev->func[1]);
+ bus->sdcnt.f2rxdata++;
+
+ /* On failure, kill the superframe, allow a couple retries */
+ if (errcode < 0) {
+ brcmf_err("glom read of %d bytes failed: %d\n",
+ dlen, errcode);
+
+ sdio_claim_host(bus->sdiodev->func[1]);
+ if (bus->glomerr++ < 3) {
+ brcmf_sdio_rxfail(bus, true, true);
+ } else {
+ bus->glomerr = 0;
+ brcmf_sdio_rxfail(bus, true, false);
+ bus->sdcnt.rxglomfail++;
+ brcmf_sdio_free_glom(bus);
+ }
+ sdio_release_host(bus->sdiodev->func[1]);
+ return 0;
+ }
+
+ brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
+ pfirst->data, min_t(int, pfirst->len, 48),
+ "SUPERFRAME:\n");
+
+ rd_new.seq_num = rxseq;
+ rd_new.len = dlen;
+ sdio_claim_host(bus->sdiodev->func[1]);
+ errcode = brcmf_sdio_hdparse(bus, pfirst->data, &rd_new,
+ BRCMF_SDIO_FT_SUPER);
+ sdio_release_host(bus->sdiodev->func[1]);
+ bus->cur_read.len = rd_new.len_nxtfrm << 4;
+
+ /* Remove superframe header, remember offset */
+ skb_pull(pfirst, rd_new.dat_offset);
+ sfdoff = rd_new.dat_offset;
+ num = 0;
+
+ /* Validate all the subframe headers */
+ skb_queue_walk(&bus->glom, pnext) {
+ /* leave when invalid subframe is found */
+ if (errcode)
+ break;
+
+ rd_new.len = pnext->len;
+ rd_new.seq_num = rxseq++;
+ sdio_claim_host(bus->sdiodev->func[1]);
+ errcode = brcmf_sdio_hdparse(bus, pnext->data, &rd_new,
+ BRCMF_SDIO_FT_SUB);
+ sdio_release_host(bus->sdiodev->func[1]);
+ brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
+ pnext->data, 32, "subframe:\n");
+
+ num++;
+ }
+
+ if (errcode) {
+ /* Terminate frame on error, request
+ a couple retries */
+ sdio_claim_host(bus->sdiodev->func[1]);
+ if (bus->glomerr++ < 3) {
+ /* Restore superframe header space */
+ skb_push(pfirst, sfdoff);
+ brcmf_sdio_rxfail(bus, true, true);
+ } else {
+ bus->glomerr = 0;
+ brcmf_sdio_rxfail(bus, true, false);
+ bus->sdcnt.rxglomfail++;
+ brcmf_sdio_free_glom(bus);
+ }
+ sdio_release_host(bus->sdiodev->func[1]);
+ bus->cur_read.len = 0;
+ return 0;
+ }
+
+ /* Basic SD framing looks ok - process each packet (header) */
+
+ skb_queue_walk_safe(&bus->glom, pfirst, pnext) {
+ dptr = (u8 *) (pfirst->data);
+ sublen = get_unaligned_le16(dptr);
+ doff = brcmf_sdio_getdatoffset(&dptr[SDPCM_HWHDR_LEN]);
+
+ brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(),
+ dptr, pfirst->len,
+ "Rx Subframe Data:\n");
+
+ __skb_trim(pfirst, sublen);
+ skb_pull(pfirst, doff);
+
+ if (pfirst->len == 0) {
+ skb_unlink(pfirst, &bus->glom);
+ brcmu_pkt_buf_free_skb(pfirst);
+ continue;
+ }
+
+ brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
+ pfirst->data,
+ min_t(int, pfirst->len, 32),
+ "subframe %d to stack, %p (%p/%d) nxt/lnk %p/%p\n",
+ bus->glom.qlen, pfirst, pfirst->data,
+ pfirst->len, pfirst->next,
+ pfirst->prev);
+ skb_unlink(pfirst, &bus->glom);
+ brcmf_rx_frame(bus->sdiodev->dev, pfirst);
+ bus->sdcnt.rxglompkts++;
+ }
+
+ bus->sdcnt.rxglomframes++;
+ }
+ return num;
+}
+
+static int brcmf_sdio_dcmd_resp_wait(struct brcmf_sdio *bus, uint *condition,
+ bool *pending)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ int timeout = msecs_to_jiffies(DCMD_RESP_TIMEOUT);
+
+ /* Wait until control frame is available */
+ add_wait_queue(&bus->dcmd_resp_wait, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ while (!(*condition) && (!signal_pending(current) && timeout))
+ timeout = schedule_timeout(timeout);
+
+ if (signal_pending(current))
+ *pending = true;
+
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&bus->dcmd_resp_wait, &wait);
+
+ return timeout;
+}
+
+static int brcmf_sdio_dcmd_resp_wake(struct brcmf_sdio *bus)
+{
+ if (waitqueue_active(&bus->dcmd_resp_wait))
+ wake_up_interruptible(&bus->dcmd_resp_wait);
+
+ return 0;
+}
+static void
+brcmf_sdio_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
+{
+ uint rdlen, pad;
+ u8 *buf = NULL, *rbuf;
+ int sdret;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ if (bus->rxblen)
+ buf = vzalloc(bus->rxblen);
+ if (!buf)
+ goto done;
+
+ rbuf = bus->rxbuf;
+ pad = ((unsigned long)rbuf % bus->head_align);
+ if (pad)
+ rbuf += (bus->head_align - pad);
+
+ /* Copy the already-read portion over */
+ memcpy(buf, hdr, BRCMF_FIRSTREAD);
+ if (len <= BRCMF_FIRSTREAD)
+ goto gotpkt;
+
+ /* Raise rdlen to next SDIO block to avoid tail command */
+ rdlen = len - BRCMF_FIRSTREAD;
+ if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) {
+ pad = bus->blocksize - (rdlen % bus->blocksize);
+ if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
+ ((len + pad) < bus->sdiodev->bus_if->maxctl))
+ rdlen += pad;
+ } else if (rdlen % bus->head_align) {
+ rdlen += bus->head_align - (rdlen % bus->head_align);
+ }
+
+ /* Drop if the read is too big or it exceeds our maximum */
+ if ((rdlen + BRCMF_FIRSTREAD) > bus->sdiodev->bus_if->maxctl) {
+ brcmf_err("%d-byte control read exceeds %d-byte buffer\n",
+ rdlen, bus->sdiodev->bus_if->maxctl);
+ brcmf_sdio_rxfail(bus, false, false);
+ goto done;
+ }
+
+ if ((len - doff) > bus->sdiodev->bus_if->maxctl) {
+ brcmf_err("%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n",
+ len, len - doff, bus->sdiodev->bus_if->maxctl);
+ bus->sdcnt.rx_toolong++;
+ brcmf_sdio_rxfail(bus, false, false);
+ goto done;
+ }
+
+ /* Read remain of frame body */
+ sdret = brcmf_sdiod_recv_buf(bus->sdiodev, rbuf, rdlen);
+ bus->sdcnt.f2rxdata++;
+
+ /* Control frame failures need retransmission */
+ if (sdret < 0) {
+ brcmf_err("read %d control bytes failed: %d\n",
+ rdlen, sdret);
+ bus->sdcnt.rxc_errors++;
+ brcmf_sdio_rxfail(bus, true, true);
+ goto done;
+ } else
+ memcpy(buf + BRCMF_FIRSTREAD, rbuf, rdlen);
+
+gotpkt:
+
+ brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(),
+ buf, len, "RxCtrl:\n");
+
+ /* Point to valid data and indicate its length */
+ spin_lock_bh(&bus->rxctl_lock);
+ if (bus->rxctl) {
+ brcmf_err("last control frame is being processed.\n");
+ spin_unlock_bh(&bus->rxctl_lock);
+ vfree(buf);
+ goto done;
+ }
+ bus->rxctl = buf + doff;
+ bus->rxctl_orig = buf;
+ bus->rxlen = len - doff;
+ spin_unlock_bh(&bus->rxctl_lock);
+
+done:
+ /* Awake any waiters */
+ brcmf_sdio_dcmd_resp_wake(bus);
+}
+
+/* Pad read to blocksize for efficiency */
+static void brcmf_sdio_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen)
+{
+ if (bus->roundup && bus->blocksize && *rdlen > bus->blocksize) {
+ *pad = bus->blocksize - (*rdlen % bus->blocksize);
+ if (*pad <= bus->roundup && *pad < bus->blocksize &&
+ *rdlen + *pad + BRCMF_FIRSTREAD < MAX_RX_DATASZ)
+ *rdlen += *pad;
+ } else if (*rdlen % bus->head_align) {
+ *rdlen += bus->head_align - (*rdlen % bus->head_align);
+ }
+}
+
+static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
+{
+ struct sk_buff *pkt; /* Packet for event or data frames */
+ u16 pad; /* Number of pad bytes to read */
+ uint rxleft = 0; /* Remaining number of frames allowed */
+ int ret; /* Return code from calls */
+ uint rxcount = 0; /* Total frames read */
+ struct brcmf_sdio_hdrinfo *rd = &bus->cur_read, rd_new;
+ u8 head_read = 0;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ /* Not finished unless we encounter no more frames indication */
+ bus->rxpending = true;
+
+ for (rd->seq_num = bus->rx_seq, rxleft = maxframes;
+ !bus->rxskip && rxleft && brcmf_bus_ready(bus->sdiodev->bus_if);
+ rd->seq_num++, rxleft--) {
+
+ /* Handle glomming separately */
+ if (bus->glomd || !skb_queue_empty(&bus->glom)) {
+ u8 cnt;
+ brcmf_dbg(GLOM, "calling rxglom: glomd %p, glom %p\n",
+ bus->glomd, skb_peek(&bus->glom));
+ cnt = brcmf_sdio_rxglom(bus, rd->seq_num);
+ brcmf_dbg(GLOM, "rxglom returned %d\n", cnt);
+ rd->seq_num += cnt - 1;
+ rxleft = (rxleft > cnt) ? (rxleft - cnt) : 1;
+ continue;
+ }
+
+ rd->len_left = rd->len;
+ /* read header first for unknow frame length */
+ sdio_claim_host(bus->sdiodev->func[1]);
+ if (!rd->len) {
+ ret = brcmf_sdiod_recv_buf(bus->sdiodev,
+ bus->rxhdr, BRCMF_FIRSTREAD);
+ bus->sdcnt.f2rxhdrs++;
+ if (ret < 0) {
+ brcmf_err("RXHEADER FAILED: %d\n",
+ ret);
+ bus->sdcnt.rx_hdrfail++;
+ brcmf_sdio_rxfail(bus, true, true);
+ sdio_release_host(bus->sdiodev->func[1]);
+ continue;
+ }
+
+ brcmf_dbg_hex_dump(BRCMF_BYTES_ON() || BRCMF_HDRS_ON(),
+ bus->rxhdr, SDPCM_HDRLEN,
+ "RxHdr:\n");
+
+ if (brcmf_sdio_hdparse(bus, bus->rxhdr, rd,
+ BRCMF_SDIO_FT_NORMAL)) {
+ sdio_release_host(bus->sdiodev->func[1]);
+ if (!bus->rxpending)
+ break;
+ else
+ continue;
+ }
+
+ if (rd->channel == SDPCM_CONTROL_CHANNEL) {
+ brcmf_sdio_read_control(bus, bus->rxhdr,
+ rd->len,
+ rd->dat_offset);
+ /* prepare the descriptor for the next read */
+ rd->len = rd->len_nxtfrm << 4;
+ rd->len_nxtfrm = 0;
+ /* treat all packet as event if we don't know */
+ rd->channel = SDPCM_EVENT_CHANNEL;
+ sdio_release_host(bus->sdiodev->func[1]);
+ continue;
+ }
+ rd->len_left = rd->len > BRCMF_FIRSTREAD ?
+ rd->len - BRCMF_FIRSTREAD : 0;
+ head_read = BRCMF_FIRSTREAD;
+ }
+
+ brcmf_sdio_pad(bus, &pad, &rd->len_left);
+
+ pkt = brcmu_pkt_buf_get_skb(rd->len_left + head_read +
+ bus->head_align);
+ if (!pkt) {
+ /* Give up on data, request rtx of events */
+ brcmf_err("brcmu_pkt_buf_get_skb failed\n");
+ brcmf_sdio_rxfail(bus, false,
+ RETRYCHAN(rd->channel));
+ sdio_release_host(bus->sdiodev->func[1]);
+ continue;
+ }
+ skb_pull(pkt, head_read);
+ pkt_align(pkt, rd->len_left, bus->head_align);
+
+ ret = brcmf_sdiod_recv_pkt(bus->sdiodev, pkt);
+ bus->sdcnt.f2rxdata++;
+ sdio_release_host(bus->sdiodev->func[1]);
+
+ if (ret < 0) {
+ brcmf_err("read %d bytes from channel %d failed: %d\n",
+ rd->len, rd->channel, ret);
+ brcmu_pkt_buf_free_skb(pkt);
+ sdio_claim_host(bus->sdiodev->func[1]);
+ brcmf_sdio_rxfail(bus, true,
+ RETRYCHAN(rd->channel));
+ sdio_release_host(bus->sdiodev->func[1]);
+ continue;
+ }
+
+ if (head_read) {
+ skb_push(pkt, head_read);
+ memcpy(pkt->data, bus->rxhdr, head_read);
+ head_read = 0;
+ } else {
+ memcpy(bus->rxhdr, pkt->data, SDPCM_HDRLEN);
+ rd_new.seq_num = rd->seq_num;
+ sdio_claim_host(bus->sdiodev->func[1]);
+ if (brcmf_sdio_hdparse(bus, bus->rxhdr, &rd_new,
+ BRCMF_SDIO_FT_NORMAL)) {
+ rd->len = 0;
+ brcmu_pkt_buf_free_skb(pkt);
+ }
+ bus->sdcnt.rx_readahead_cnt++;
+ if (rd->len != roundup(rd_new.len, 16)) {
+ brcmf_err("frame length mismatch:read %d, should be %d\n",
+ rd->len,
+ roundup(rd_new.len, 16) >> 4);
+ rd->len = 0;
+ brcmf_sdio_rxfail(bus, true, true);
+ sdio_release_host(bus->sdiodev->func[1]);
+ brcmu_pkt_buf_free_skb(pkt);
+ continue;
+ }
+ sdio_release_host(bus->sdiodev->func[1]);
+ rd->len_nxtfrm = rd_new.len_nxtfrm;
+ rd->channel = rd_new.channel;
+ rd->dat_offset = rd_new.dat_offset;
+
+ brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() &&
+ BRCMF_DATA_ON()) &&
+ BRCMF_HDRS_ON(),
+ bus->rxhdr, SDPCM_HDRLEN,
+ "RxHdr:\n");
+
+ if (rd_new.channel == SDPCM_CONTROL_CHANNEL) {
+ brcmf_err("readahead on control packet %d?\n",
+ rd_new.seq_num);
+ /* Force retry w/normal header read */
+ rd->len = 0;
+ sdio_claim_host(bus->sdiodev->func[1]);
+ brcmf_sdio_rxfail(bus, false, true);
+ sdio_release_host(bus->sdiodev->func[1]);
+ brcmu_pkt_buf_free_skb(pkt);
+ continue;
+ }
+ }
+
+ brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(),
+ pkt->data, rd->len, "Rx Data:\n");
+
+ /* Save superframe descriptor and allocate packet frame */
+ if (rd->channel == SDPCM_GLOM_CHANNEL) {
+ if (SDPCM_GLOMDESC(&bus->rxhdr[SDPCM_HWHDR_LEN])) {
+ brcmf_dbg(GLOM, "glom descriptor, %d bytes:\n",
+ rd->len);
+ brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
+ pkt->data, rd->len,
+ "Glom Data:\n");
+ __skb_trim(pkt, rd->len);
+ skb_pull(pkt, SDPCM_HDRLEN);
+ bus->glomd = pkt;
+ } else {
+ brcmf_err("%s: glom superframe w/o "
+ "descriptor!\n", __func__);
+ sdio_claim_host(bus->sdiodev->func[1]);
+ brcmf_sdio_rxfail(bus, false, false);
+ sdio_release_host(bus->sdiodev->func[1]);
+ }
+ /* prepare the descriptor for the next read */
+ rd->len = rd->len_nxtfrm << 4;
+ rd->len_nxtfrm = 0;
+ /* treat all packet as event if we don't know */
+ rd->channel = SDPCM_EVENT_CHANNEL;
+ continue;
+ }
+
+ /* Fill in packet len and prio, deliver upward */
+ __skb_trim(pkt, rd->len);
+ skb_pull(pkt, rd->dat_offset);
+
+ /* prepare the descriptor for the next read */
+ rd->len = rd->len_nxtfrm << 4;
+ rd->len_nxtfrm = 0;
+ /* treat all packet as event if we don't know */
+ rd->channel = SDPCM_EVENT_CHANNEL;
+
+ if (pkt->len == 0) {
+ brcmu_pkt_buf_free_skb(pkt);
+ continue;
+ }
+
+ brcmf_rx_frame(bus->sdiodev->dev, pkt);
+ }
+
+ rxcount = maxframes - rxleft;
+ /* Message if we hit the limit */
+ if (!rxleft)
+ brcmf_dbg(DATA, "hit rx limit of %d frames\n", maxframes);
+ else
+ brcmf_dbg(DATA, "processed %d frames\n", rxcount);
+ /* Back off rxseq if awaiting rtx, update rx_seq */
+ if (bus->rxskip)
+ rd->seq_num--;
+ bus->rx_seq = rd->seq_num;
+
+ return rxcount;
+}
+
+static void
+brcmf_sdio_wait_event_wakeup(struct brcmf_sdio *bus)
+{
+ if (waitqueue_active(&bus->ctrl_wait))
+ wake_up_interruptible(&bus->ctrl_wait);
+ return;
+}
+
+static int brcmf_sdio_txpkt_hdalign(struct brcmf_sdio *bus, struct sk_buff *pkt)
+{
+ u16 head_pad;
+ u8 *dat_buf;
+
+ dat_buf = (u8 *)(pkt->data);
+
+ /* Check head padding */
+ head_pad = ((unsigned long)dat_buf % bus->head_align);
+ if (head_pad) {
+ if (skb_headroom(pkt) < head_pad) {
+ bus->sdiodev->bus_if->tx_realloc++;
+ head_pad = 0;
+ if (skb_cow(pkt, head_pad))
+ return -ENOMEM;
+ }
+ skb_push(pkt, head_pad);
+ dat_buf = (u8 *)(pkt->data);
+ memset(dat_buf, 0, head_pad + bus->tx_hdrlen);
+ }
+ return head_pad;
+}
+
+/**
+ * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for
+ * bus layer usage.
+ */
+/* flag marking a dummy skb added for DMA alignment requirement */
+#define ALIGN_SKB_FLAG 0x8000
+/* bit mask of data length chopped from the previous packet */
+#define ALIGN_SKB_CHOP_LEN_MASK 0x7fff
+
+static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus,
+ struct sk_buff_head *pktq,
+ struct sk_buff *pkt, u16 total_len)
+{
+ struct brcmf_sdio_dev *sdiodev;
+ struct sk_buff *pkt_pad;
+ u16 tail_pad, tail_chop, chain_pad;
+ unsigned int blksize;
+ bool lastfrm;
+ int ntail, ret;
+
+ sdiodev = bus->sdiodev;
+ blksize = sdiodev->func[SDIO_FUNC_2]->cur_blksize;
+ /* sg entry alignment should be a divisor of block size */
+ WARN_ON(blksize % bus->sgentry_align);
+
+ /* Check tail padding */
+ lastfrm = skb_queue_is_last(pktq, pkt);
+ tail_pad = 0;
+ tail_chop = pkt->len % bus->sgentry_align;
+ if (tail_chop)
+ tail_pad = bus->sgentry_align - tail_chop;
+ chain_pad = (total_len + tail_pad) % blksize;
+ if (lastfrm && chain_pad)
+ tail_pad += blksize - chain_pad;
+ if (skb_tailroom(pkt) < tail_pad && pkt->len > blksize) {
+ pkt_pad = brcmu_pkt_buf_get_skb(tail_pad + tail_chop +
+ bus->head_align);
+ if (pkt_pad == NULL)
+ return -ENOMEM;
+ ret = brcmf_sdio_txpkt_hdalign(bus, pkt_pad);
+ if (unlikely(ret < 0)) {
+ kfree_skb(pkt_pad);
+ return ret;
+ }
+ memcpy(pkt_pad->data,
+ pkt->data + pkt->len - tail_chop,
+ tail_chop);
+ *(u16 *)(pkt_pad->cb) = ALIGN_SKB_FLAG + tail_chop;
+ skb_trim(pkt, pkt->len - tail_chop);
+ skb_trim(pkt_pad, tail_pad + tail_chop);
+ __skb_queue_after(pktq, pkt, pkt_pad);
+ } else {
+ ntail = pkt->data_len + tail_pad -
+ (pkt->end - pkt->tail);
+ if (skb_cloned(pkt) || ntail > 0)
+ if (pskb_expand_head(pkt, 0, ntail, GFP_ATOMIC))
+ return -ENOMEM;
+ if (skb_linearize(pkt))
+ return -ENOMEM;
+ __skb_put(pkt, tail_pad);
+ }
+
+ return tail_pad;
+}
+
+/**
+ * brcmf_sdio_txpkt_prep - packet preparation for transmit
+ * @bus: brcmf_sdio structure pointer
+ * @pktq: packet list pointer
+ * @chan: virtual channel to transmit the packet
+ *
+ * Processes to be applied to the packet
+ * - Align data buffer pointer
+ * - Align data buffer length
+ * - Prepare header
+ * Return: negative value if there is error
+ */
+static int
+brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
+ uint chan)
+{
+ u16 head_pad, total_len;
+ struct sk_buff *pkt_next;
+ u8 txseq;
+ int ret;
+ struct brcmf_sdio_hdrinfo hd_info = {0};
+
+ txseq = bus->tx_seq;
+ total_len = 0;
+ skb_queue_walk(pktq, pkt_next) {
+ /* alignment packet inserted in previous
+ * loop cycle can be skipped as it is
+ * already properly aligned and does not
+ * need an sdpcm header.
+ */
+ if (*(u16 *)(pkt_next->cb) & ALIGN_SKB_FLAG)
+ continue;
+
+ /* align packet data pointer */
+ ret = brcmf_sdio_txpkt_hdalign(bus, pkt_next);
+ if (ret < 0)
+ return ret;
+ head_pad = (u16)ret;
+ if (head_pad)
+ memset(pkt_next->data + bus->tx_hdrlen, 0, head_pad);
+
+ total_len += pkt_next->len;
+
+ hd_info.len = pkt_next->len;
+ hd_info.lastfrm = skb_queue_is_last(pktq, pkt_next);
+ if (bus->txglom && pktq->qlen > 1) {
+ ret = brcmf_sdio_txpkt_prep_sg(bus, pktq,
+ pkt_next, total_len);
+ if (ret < 0)
+ return ret;
+ hd_info.tail_pad = (u16)ret;
+ total_len += (u16)ret;
+ }
+
+ hd_info.channel = chan;
+ hd_info.dat_offset = head_pad + bus->tx_hdrlen;
+ hd_info.seq_num = txseq++;
+
+ /* Now fill the header */
+ brcmf_sdio_hdpack(bus, pkt_next->data, &hd_info);
+
+ if (BRCMF_BYTES_ON() &&
+ ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) ||
+ (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL)))
+ brcmf_dbg_hex_dump(true, pkt_next->data, hd_info.len,
+ "Tx Frame:\n");
+ else if (BRCMF_HDRS_ON())
+ brcmf_dbg_hex_dump(true, pkt_next->data,
+ head_pad + bus->tx_hdrlen,
+ "Tx Header:\n");
+ }
+ /* Hardware length tag of the first packet should be total
+ * length of the chain (including padding)
+ */
+ if (bus->txglom)
+ brcmf_sdio_update_hwhdr(pktq->next->data, total_len);
+ return 0;
+}
+
+/**
+ * brcmf_sdio_txpkt_postp - packet post processing for transmit
+ * @bus: brcmf_sdio structure pointer
+ * @pktq: packet list pointer
+ *
+ * Processes to be applied to the packet
+ * - Remove head padding
+ * - Remove tail padding
+ */
+static void
+brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq)
+{
+ u8 *hdr;
+ u32 dat_offset;
+ u16 tail_pad;
+ u16 dummy_flags, chop_len;
+ struct sk_buff *pkt_next, *tmp, *pkt_prev;
+
+ skb_queue_walk_safe(pktq, pkt_next, tmp) {
+ dummy_flags = *(u16 *)(pkt_next->cb);
+ if (dummy_flags & ALIGN_SKB_FLAG) {
+ chop_len = dummy_flags & ALIGN_SKB_CHOP_LEN_MASK;
+ if (chop_len) {
+ pkt_prev = pkt_next->prev;
+ skb_put(pkt_prev, chop_len);
+ }
+ __skb_unlink(pkt_next, pktq);
+ brcmu_pkt_buf_free_skb(pkt_next);
+ } else {
+ hdr = pkt_next->data + bus->tx_hdrlen - SDPCM_SWHDR_LEN;
+ dat_offset = le32_to_cpu(*(__le32 *)hdr);
+ dat_offset = (dat_offset & SDPCM_DOFFSET_MASK) >>
+ SDPCM_DOFFSET_SHIFT;
+ skb_pull(pkt_next, dat_offset);
+ if (bus->txglom) {
+ tail_pad = le16_to_cpu(*(__le16 *)(hdr - 2));
+ skb_trim(pkt_next, pkt_next->len - tail_pad);
+ }
+ }
+ }
+}
+
+/* Writes a HW/SW header into the packet and sends it. */
+/* Assumes: (a) header space already there, (b) caller holds lock */
+static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
+ uint chan)
+{
+ int ret;
+ struct sk_buff *pkt_next, *tmp;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ ret = brcmf_sdio_txpkt_prep(bus, pktq, chan);
+ if (ret)
+ goto done;
+
+ sdio_claim_host(bus->sdiodev->func[1]);
+ ret = brcmf_sdiod_send_pkt(bus->sdiodev, pktq);
+ bus->sdcnt.f2txdata++;
+
+ if (ret < 0)
+ brcmf_sdio_txfail(bus);
+
+ sdio_release_host(bus->sdiodev->func[1]);
+
+done:
+ brcmf_sdio_txpkt_postp(bus, pktq);
+ if (ret == 0)
+ bus->tx_seq = (bus->tx_seq + pktq->qlen) % SDPCM_SEQ_WRAP;
+ skb_queue_walk_safe(pktq, pkt_next, tmp) {
+ __skb_unlink(pkt_next, pktq);
+ brcmf_txcomplete(bus->sdiodev->dev, pkt_next, ret == 0);
+ }
+ return ret;
+}
+
+static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
+{
+ struct sk_buff *pkt;
+ struct sk_buff_head pktq;
+ u32 intstatus = 0;
+ int ret = 0, prec_out, i;
+ uint cnt = 0;
+ u8 tx_prec_map, pkt_num;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ tx_prec_map = ~bus->flowcontrol;
+
+ /* Send frames until the limit or some other event */
+ for (cnt = 0; (cnt < maxframes) && data_ok(bus);) {
+ pkt_num = 1;
+ if (down_interruptible(&bus->tx_seq_lock))
+ return cnt;
+ if (bus->txglom)
+ pkt_num = min_t(u8, bus->tx_max - bus->tx_seq,
+ bus->sdiodev->txglomsz);
+ pkt_num = min_t(u32, pkt_num,
+ brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol));
+ __skb_queue_head_init(&pktq);
+ spin_lock_bh(&bus->txq_lock);
+ for (i = 0; i < pkt_num; i++) {
+ pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map,
+ &prec_out);
+ if (pkt == NULL)
+ break;
+ __skb_queue_tail(&pktq, pkt);
+ }
+ spin_unlock_bh(&bus->txq_lock);
+ if (i == 0) {
+ up(&bus->tx_seq_lock);
+ break;
+ }
+
+ ret = brcmf_sdio_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL);
+ up(&bus->tx_seq_lock);
+
+ cnt += i;
+
+ /* In poll mode, need to check for other events */
+ if (!bus->intr) {
+ /* Check device status, signal pending interrupt */
+ sdio_claim_host(bus->sdiodev->func[1]);
+ ret = r_sdreg32(bus, &intstatus,
+ offsetof(struct sdpcmd_regs,
+ intstatus));
+ sdio_release_host(bus->sdiodev->func[1]);
+ bus->sdcnt.f2txdata++;
+ if (ret != 0)
+ break;
+ if (intstatus & bus->hostintmask)
+ atomic_set(&bus->ipend, 1);
+ }
+ }
+
+ /* Deflow-control stack if needed */
+ if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DATA) &&
+ bus->txoff && (pktq_len(&bus->txq) < TXLOW)) {
+ bus->txoff = false;
+ brcmf_txflowblock(bus->sdiodev->dev, false);
+ }
+
+ return cnt;
+}
+
+static int brcmf_sdio_tx_ctrlframe(struct brcmf_sdio *bus, u8 *frame, u16 len)
+{
+ u8 doff;
+ u16 pad;
+ uint retries = 0;
+ struct brcmf_sdio_hdrinfo hd_info = {0};
+ int ret;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ /* Back the pointer to make room for bus header */
+ frame -= bus->tx_hdrlen;
+ len += bus->tx_hdrlen;
+
+ /* Add alignment padding (optional for ctl frames) */
+ doff = ((unsigned long)frame % bus->head_align);
+ if (doff) {
+ frame -= doff;
+ len += doff;
+ memset(frame + bus->tx_hdrlen, 0, doff);
+ }
+
+ /* Round send length to next SDIO block */
+ pad = 0;
+ if (bus->roundup && bus->blocksize && (len > bus->blocksize)) {
+ pad = bus->blocksize - (len % bus->blocksize);
+ if ((pad > bus->roundup) || (pad >= bus->blocksize))
+ pad = 0;
+ } else if (len % bus->head_align) {
+ pad = bus->head_align - (len % bus->head_align);
+ }
+ len += pad;
+
+ hd_info.len = len - pad;
+ hd_info.channel = SDPCM_CONTROL_CHANNEL;
+ hd_info.dat_offset = doff + bus->tx_hdrlen;
+ hd_info.seq_num = bus->tx_seq;
+ hd_info.lastfrm = true;
+ hd_info.tail_pad = pad;
+ brcmf_sdio_hdpack(bus, frame, &hd_info);
+
+ if (bus->txglom)
+ brcmf_sdio_update_hwhdr(frame, len);
+
+ brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(),
+ frame, len, "Tx Frame:\n");
+ brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() && BRCMF_CTL_ON()) &&
+ BRCMF_HDRS_ON(),
+ frame, min_t(u16, len, 16), "TxHdr:\n");
+
+ do {
+ ret = brcmf_sdiod_send_buf(bus->sdiodev, frame, len);
+
+ if (ret < 0)
+ brcmf_sdio_txfail(bus);
+ else
+ bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP;
+ } while (ret < 0 && retries++ < TXRETRIES);
+
+ return ret;
+}
+
+static void brcmf_sdio_bus_stop(struct device *dev)
+{
+ u32 local_hostintmask;
+ u8 saveclk;
+ int err;
+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+ struct brcmf_sdio *bus = sdiodev->bus;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ if (bus->watchdog_tsk) {
+ send_sig(SIGTERM, bus->watchdog_tsk, 1);
+ kthread_stop(bus->watchdog_tsk);
+ bus->watchdog_tsk = NULL;
+ }
+
+ if (bus_if->state == BRCMF_BUS_DOWN) {
+ sdio_claim_host(sdiodev->func[1]);
+
+ /* Enable clock for device interrupts */
+ brcmf_sdio_bus_sleep(bus, false, false);
+
+ /* Disable and clear interrupts at the chip level also */
+ w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask));
+ local_hostintmask = bus->hostintmask;
+ bus->hostintmask = 0;
+
+ /* Force backplane clocks to assure F2 interrupt propagates */
+ saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ &err);
+ if (!err)
+ brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ (saveclk | SBSDIO_FORCE_HT), &err);
+ if (err)
+ brcmf_err("Failed to force clock for F2: err %d\n",
+ err);
+
+ /* Turn off the bus (F2), free any pending packets */
+ brcmf_dbg(INTR, "disable SDIO interrupts\n");
+ sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
+
+ /* Clear any pending interrupts now that F2 is disabled */
+ w_sdreg32(bus, local_hostintmask,
+ offsetof(struct sdpcmd_regs, intstatus));
+
+ sdio_release_host(sdiodev->func[1]);
+ }
+ /* Clear the data packet queues */
+ brcmu_pktq_flush(&bus->txq, true, NULL, NULL);
+
+ /* Clear any held glomming stuff */
+ if (bus->glomd)
+ brcmu_pkt_buf_free_skb(bus->glomd);
+ brcmf_sdio_free_glom(bus);
+
+ /* Clear rx control and wake any waiters */
+ spin_lock_bh(&bus->rxctl_lock);
+ bus->rxlen = 0;
+ spin_unlock_bh(&bus->rxctl_lock);
+ brcmf_sdio_dcmd_resp_wake(bus);
+
+ /* Reset some F2 state stuff */
+ bus->rxskip = false;
+ bus->tx_seq = bus->rx_seq = 0;
+}
+
+static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus)
+{
+ unsigned long flags;
+
+ if (bus->sdiodev->oob_irq_requested) {
+ spin_lock_irqsave(&bus->sdiodev->irq_en_lock, flags);
+ if (!bus->sdiodev->irq_en && !atomic_read(&bus->ipend)) {
+ enable_irq(bus->sdiodev->pdata->oob_irq_nr);
+ bus->sdiodev->irq_en = true;
+ }
+ spin_unlock_irqrestore(&bus->sdiodev->irq_en_lock, flags);
+ }
+}
+
+static void atomic_orr(int val, atomic_t *v)
+{
+ int old_val;
+
+ old_val = atomic_read(v);
+ while (atomic_cmpxchg(v, old_val, val | old_val) != old_val)
+ old_val = atomic_read(v);
+}
+
+static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
+{
+ struct brcmf_core *buscore;
+ u32 addr;
+ unsigned long val;
+ int ret;
+
+ buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
+ addr = buscore->base + offsetof(struct sdpcmd_regs, intstatus);
+
+ val = brcmf_sdiod_regrl(bus->sdiodev, addr, &ret);
+ bus->sdcnt.f1regdata++;
+ if (ret != 0)
+ return ret;
+
+ val &= bus->hostintmask;
+ atomic_set(&bus->fcstate, !!(val & I_HMB_FC_STATE));
+
+ /* Clear interrupts */
+ if (val) {
+ brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret);
+ bus->sdcnt.f1regdata++;
+ atomic_orr(val, &bus->intstatus);
+ }
+
+ return ret;
+}
+
+static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
+{
+ u32 newstatus = 0;
+ unsigned long intstatus;
+ uint txlimit = bus->txbound; /* Tx frames to send before resched */
+ uint framecnt; /* Temporary counter of tx/rx frames */
+ int err = 0;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ sdio_claim_host(bus->sdiodev->func[1]);
+
+ /* If waiting for HTAVAIL, check status */
+ if (!bus->sr_enabled && bus->clkstate == CLK_PENDING) {
+ u8 clkctl, devctl = 0;
+
+#ifdef DEBUG
+ /* Check for inconsistent device control */
+ devctl = brcmf_sdiod_regrb(bus->sdiodev,
+ SBSDIO_DEVICE_CTL, &err);
+#endif /* DEBUG */
+
+ /* Read CSR, if clock on switch to AVAIL, else ignore */
+ clkctl = brcmf_sdiod_regrb(bus->sdiodev,
+ SBSDIO_FUNC1_CHIPCLKCSR, &err);
+
+ brcmf_dbg(SDIO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n",
+ devctl, clkctl);
+
+ if (SBSDIO_HTAV(clkctl)) {
+ devctl = brcmf_sdiod_regrb(bus->sdiodev,
+ SBSDIO_DEVICE_CTL, &err);
+ devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
+ brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
+ devctl, &err);
+ bus->clkstate = CLK_AVAIL;
+ }
+ }
+
+ /* Make sure backplane clock is on */
+ brcmf_sdio_bus_sleep(bus, false, true);
+
+ /* Pending interrupt indicates new device status */
+ if (atomic_read(&bus->ipend) > 0) {
+ atomic_set(&bus->ipend, 0);
+ err = brcmf_sdio_intr_rstatus(bus);
+ }
+
+ /* Start with leftover status bits */
+ intstatus = atomic_xchg(&bus->intstatus, 0);
+
+ /* Handle flow-control change: read new state in case our ack
+ * crossed another change interrupt. If change still set, assume
+ * FC ON for safety, let next loop through do the debounce.
+ */
+ if (intstatus & I_HMB_FC_CHANGE) {
+ intstatus &= ~I_HMB_FC_CHANGE;
+ err = w_sdreg32(bus, I_HMB_FC_CHANGE,
+ offsetof(struct sdpcmd_regs, intstatus));
+
+ err = r_sdreg32(bus, &newstatus,
+ offsetof(struct sdpcmd_regs, intstatus));
+ bus->sdcnt.f1regdata += 2;
+ atomic_set(&bus->fcstate,
+ !!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE)));
+ intstatus |= (newstatus & bus->hostintmask);
+ }
+
+ /* Handle host mailbox indication */
+ if (intstatus & I_HMB_HOST_INT) {
+ intstatus &= ~I_HMB_HOST_INT;
+ intstatus |= brcmf_sdio_hostmail(bus);
+ }
+
+ sdio_release_host(bus->sdiodev->func[1]);
+
+ /* Generally don't ask for these, can get CRC errors... */
+ if (intstatus & I_WR_OOSYNC) {
+ brcmf_err("Dongle reports WR_OOSYNC\n");
+ intstatus &= ~I_WR_OOSYNC;
+ }
+
+ if (intstatus & I_RD_OOSYNC) {
+ brcmf_err("Dongle reports RD_OOSYNC\n");
+ intstatus &= ~I_RD_OOSYNC;
+ }
+
+ if (intstatus & I_SBINT) {
+ brcmf_err("Dongle reports SBINT\n");
+ intstatus &= ~I_SBINT;
+ }
+
+ /* Would be active due to wake-wlan in gSPI */
+ if (intstatus & I_CHIPACTIVE) {
+ brcmf_dbg(INFO, "Dongle reports CHIPACTIVE\n");
+ intstatus &= ~I_CHIPACTIVE;
+ }
+
+ /* Ignore frame indications if rxskip is set */
+ if (bus->rxskip)
+ intstatus &= ~I_HMB_FRAME_IND;
+
+ /* On frame indication, read available frames */
+ if ((intstatus & I_HMB_FRAME_IND) && (bus->clkstate == CLK_AVAIL)) {
+ brcmf_sdio_readframes(bus, bus->rxbound);
+ if (!bus->rxpending)
+ intstatus &= ~I_HMB_FRAME_IND;
+ }
+
+ /* Keep still-pending events for next scheduling */
+ if (intstatus)
+ atomic_orr(intstatus, &bus->intstatus);
+
+ brcmf_sdio_clrintr(bus);
+
+ if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) &&
+ (down_interruptible(&bus->tx_seq_lock) == 0)) {
+ if (data_ok(bus)) {
+ sdio_claim_host(bus->sdiodev->func[1]);
+ err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf,
+ bus->ctrl_frame_len);
+ sdio_release_host(bus->sdiodev->func[1]);
+
+ bus->ctrl_frame_stat = false;
+ brcmf_sdio_wait_event_wakeup(bus);
+ }
+ up(&bus->tx_seq_lock);
+ }
+ /* Send queued frames (limit 1 if rx may still be pending) */
+ if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) &&
+ brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit &&
+ data_ok(bus)) {
+ framecnt = bus->rxpending ? min(txlimit, bus->txminmax) :
+ txlimit;
+ brcmf_sdio_sendfromq(bus, framecnt);
+ }
+
+ if (!brcmf_bus_ready(bus->sdiodev->bus_if) || (err != 0)) {
+ brcmf_err("failed backplane access over SDIO, halting operation\n");
+ atomic_set(&bus->intstatus, 0);
+ } else if (atomic_read(&bus->intstatus) ||
+ atomic_read(&bus->ipend) > 0 ||
+ (!atomic_read(&bus->fcstate) &&
+ brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) &&
+ data_ok(bus))) {
+ atomic_inc(&bus->dpc_tskcnt);
+ }
+}
+
+static struct pktq *brcmf_sdio_bus_gettxq(struct device *dev)
+{
+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+ struct brcmf_sdio *bus = sdiodev->bus;
+
+ return &bus->txq;
+}
+
+static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt)
+{
+ int ret = -EBADE;
+ uint prec;
+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+ struct brcmf_sdio *bus = sdiodev->bus;
+
+ brcmf_dbg(TRACE, "Enter: pkt: data %p len %d\n", pkt->data, pkt->len);
+
+ /* Add space for the header */
+ skb_push(pkt, bus->tx_hdrlen);
+ /* precondition: IS_ALIGNED((unsigned long)(pkt->data), 2) */
+
+ prec = prio2prec((pkt->priority & PRIOMASK));
+
+ /* Check for existing queue, current flow-control,
+ pending event, or pending clock */
+ brcmf_dbg(TRACE, "deferring pktq len %d\n", pktq_len(&bus->txq));
+ bus->sdcnt.fcqueued++;
+
+ /* Priority based enq */
+ spin_lock_bh(&bus->txq_lock);
+ /* reset bus_flags in packet cb */
+ *(u16 *)(pkt->cb) = 0;
+ if (!brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec)) {
+ skb_pull(pkt, bus->tx_hdrlen);
+ brcmf_err("out of bus->txq !!!\n");
+ ret = -ENOSR;
+ } else {
+ ret = 0;
+ }
+
+ if (pktq_len(&bus->txq) >= TXHI) {
+ bus->txoff = true;
+ brcmf_txflowblock(bus->sdiodev->dev, true);
+ }
+ spin_unlock_bh(&bus->txq_lock);
+
+#ifdef DEBUG
+ if (pktq_plen(&bus->txq, prec) > qcount[prec])
+ qcount[prec] = pktq_plen(&bus->txq, prec);
+#endif
+
+ if (atomic_read(&bus->dpc_tskcnt) == 0) {
+ atomic_inc(&bus->dpc_tskcnt);
+ queue_work(bus->brcmf_wq, &bus->datawork);
+ }
+
+ return ret;
+}
+
+#ifdef DEBUG
+#define CONSOLE_LINE_MAX 192
+
+static int brcmf_sdio_readconsole(struct brcmf_sdio *bus)
+{
+ struct brcmf_console *c = &bus->console;
+ u8 line[CONSOLE_LINE_MAX], ch;
+ u32 n, idx, addr;
+ int rv;
+
+ /* Don't do anything until FWREADY updates console address */
+ if (bus->console_addr == 0)
+ return 0;
+
+ /* Read console log struct */
+ addr = bus->console_addr + offsetof(struct rte_console, log_le);
+ rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&c->log_le,
+ sizeof(c->log_le));
+ if (rv < 0)
+ return rv;
+
+ /* Allocate console buffer (one time only) */
+ if (c->buf == NULL) {
+ c->bufsize = le32_to_cpu(c->log_le.buf_size);
+ c->buf = kmalloc(c->bufsize, GFP_ATOMIC);
+ if (c->buf == NULL)
+ return -ENOMEM;
+ }
+
+ idx = le32_to_cpu(c->log_le.idx);
+
+ /* Protect against corrupt value */
+ if (idx > c->bufsize)
+ return -EBADE;
+
+ /* Skip reading the console buffer if the index pointer
+ has not moved */
+ if (idx == c->last)
+ return 0;
+
+ /* Read the console buffer */
+ addr = le32_to_cpu(c->log_le.buf);
+ rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, c->buf, c->bufsize);
+ if (rv < 0)
+ return rv;
+
+ while (c->last != idx) {
+ for (n = 0; n < CONSOLE_LINE_MAX - 2; n++) {
+ if (c->last == idx) {
+ /* This would output a partial line.
+ * Instead, back up
+ * the buffer pointer and output this
+ * line next time around.
+ */
+ if (c->last >= n)
+ c->last -= n;
+ else
+ c->last = c->bufsize - n;
+ goto break2;
+ }
+ ch = c->buf[c->last];
+ c->last = (c->last + 1) % c->bufsize;
+ if (ch == '\n')
+ break;
+ line[n] = ch;
+ }
+
+ if (n > 0) {
+ if (line[n - 1] == '\r')
+ n--;
+ line[n] = 0;
+ pr_debug("CONSOLE: %s\n", line);
+ }
+ }
+break2:
+
+ return 0;
+}
+#endif /* DEBUG */
+
+static int
+brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
+{
+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+ struct brcmf_sdio *bus = sdiodev->bus;
+ int ret = -1;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ if (down_interruptible(&bus->tx_seq_lock))
+ return -EINTR;
+
+ if (!data_ok(bus)) {
+ brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n",
+ bus->tx_max, bus->tx_seq);
+ up(&bus->tx_seq_lock);
+ /* Send from dpc */
+ bus->ctrl_frame_buf = msg;
+ bus->ctrl_frame_len = msglen;
+ bus->ctrl_frame_stat = true;
+
+ wait_event_interruptible_timeout(bus->ctrl_wait,
+ !bus->ctrl_frame_stat,
+ msecs_to_jiffies(2000));
+
+ if (!bus->ctrl_frame_stat) {
+ brcmf_dbg(SDIO, "ctrl_frame_stat == false\n");
+ ret = 0;
+ } else {
+ brcmf_dbg(SDIO, "ctrl_frame_stat == true\n");
+ bus->ctrl_frame_stat = false;
+ if (down_interruptible(&bus->tx_seq_lock))
+ return -EINTR;
+ ret = -1;
+ }
+ }
+ if (ret == -1) {
+ sdio_claim_host(bus->sdiodev->func[1]);
+ brcmf_sdio_bus_sleep(bus, false, false);
+ ret = brcmf_sdio_tx_ctrlframe(bus, msg, msglen);
+ sdio_release_host(bus->sdiodev->func[1]);
+ up(&bus->tx_seq_lock);
+ }
+
+ if (ret)
+ bus->sdcnt.tx_ctlerrs++;
+ else
+ bus->sdcnt.tx_ctlpkts++;
+
+ return ret ? -EIO : 0;
+}
+
+#ifdef DEBUG
+static int brcmf_sdio_dump_console(struct seq_file *seq, struct brcmf_sdio *bus,
+ struct sdpcm_shared *sh)
+{
+ u32 addr, console_ptr, console_size, console_index;
+ char *conbuf = NULL;
+ __le32 sh_val;
+ int rv;
+
+ /* obtain console information from device memory */
+ addr = sh->console_addr + offsetof(struct rte_console, log_le);
+ rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr,
+ (u8 *)&sh_val, sizeof(u32));
+ if (rv < 0)
+ return rv;
+ console_ptr = le32_to_cpu(sh_val);
+
+ addr = sh->console_addr + offsetof(struct rte_console, log_le.buf_size);
+ rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr,
+ (u8 *)&sh_val, sizeof(u32));
+ if (rv < 0)
+ return rv;
+ console_size = le32_to_cpu(sh_val);
+
+ addr = sh->console_addr + offsetof(struct rte_console, log_le.idx);
+ rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr,
+ (u8 *)&sh_val, sizeof(u32));
+ if (rv < 0)
+ return rv;
+ console_index = le32_to_cpu(sh_val);
+
+ /* allocate buffer for console data */
+ if (console_size <= CONSOLE_BUFFER_MAX)
+ conbuf = vzalloc(console_size+1);
+
+ if (!conbuf)
+ return -ENOMEM;
+
+ /* obtain the console data from device */
+ conbuf[console_size] = '\0';
+ rv = brcmf_sdiod_ramrw(bus->sdiodev, false, console_ptr, (u8 *)conbuf,
+ console_size);
+ if (rv < 0)
+ goto done;
+
+ rv = seq_write(seq, conbuf + console_index,
+ console_size - console_index);
+ if (rv < 0)
+ goto done;
+
+ if (console_index > 0)
+ rv = seq_write(seq, conbuf, console_index - 1);
+
+done:
+ vfree(conbuf);
+ return rv;
+}
+
+static int brcmf_sdio_trap_info(struct seq_file *seq, struct brcmf_sdio *bus,
+ struct sdpcm_shared *sh)
+{
+ int error;
+ struct brcmf_trap_info tr;
+
+ if ((sh->flags & SDPCM_SHARED_TRAP) == 0) {
+ brcmf_dbg(INFO, "no trap in firmware\n");
+ return 0;
+ }
+
+ error = brcmf_sdiod_ramrw(bus->sdiodev, false, sh->trap_addr, (u8 *)&tr,
+ sizeof(struct brcmf_trap_info));
+ if (error < 0)
+ return error;
+
+ seq_printf(seq,
+ "dongle trap info: type 0x%x @ epc 0x%08x\n"
+ " cpsr 0x%08x spsr 0x%08x sp 0x%08x\n"
+ " lr 0x%08x pc 0x%08x offset 0x%x\n"
+ " r0 0x%08x r1 0x%08x r2 0x%08x r3 0x%08x\n"
+ " r4 0x%08x r5 0x%08x r6 0x%08x r7 0x%08x\n",
+ le32_to_cpu(tr.type), le32_to_cpu(tr.epc),
+ le32_to_cpu(tr.cpsr), le32_to_cpu(tr.spsr),
+ le32_to_cpu(tr.r13), le32_to_cpu(tr.r14),
+ le32_to_cpu(tr.pc), sh->trap_addr,
+ le32_to_cpu(tr.r0), le32_to_cpu(tr.r1),
+ le32_to_cpu(tr.r2), le32_to_cpu(tr.r3),
+ le32_to_cpu(tr.r4), le32_to_cpu(tr.r5),
+ le32_to_cpu(tr.r6), le32_to_cpu(tr.r7));
+
+ return 0;
+}
+
+static int brcmf_sdio_assert_info(struct seq_file *seq, struct brcmf_sdio *bus,
+ struct sdpcm_shared *sh)
+{
+ int error = 0;
+ char file[80] = "?";
+ char expr[80] = "<???>";
+
+ if ((sh->flags & SDPCM_SHARED_ASSERT_BUILT) == 0) {
+ brcmf_dbg(INFO, "firmware not built with -assert\n");
+ return 0;
+ } else if ((sh->flags & SDPCM_SHARED_ASSERT) == 0) {
+ brcmf_dbg(INFO, "no assert in dongle\n");
+ return 0;
+ }
+
+ sdio_claim_host(bus->sdiodev->func[1]);
+ if (sh->assert_file_addr != 0) {
+ error = brcmf_sdiod_ramrw(bus->sdiodev, false,
+ sh->assert_file_addr, (u8 *)file, 80);
+ if (error < 0)
+ return error;
+ }
+ if (sh->assert_exp_addr != 0) {
+ error = brcmf_sdiod_ramrw(bus->sdiodev, false,
+ sh->assert_exp_addr, (u8 *)expr, 80);
+ if (error < 0)
+ return error;
+ }
+ sdio_release_host(bus->sdiodev->func[1]);
+
+ seq_printf(seq, "dongle assert: %s:%d: assert(%s)\n",
+ file, sh->assert_line, expr);
+ return 0;
+}
+
+static int brcmf_sdio_checkdied(struct brcmf_sdio *bus)
+{
+ int error;
+ struct sdpcm_shared sh;
+
+ error = brcmf_sdio_readshared(bus, &sh);
+
+ if (error < 0)
+ return error;
+
+ if ((sh.flags & SDPCM_SHARED_ASSERT_BUILT) == 0)
+ brcmf_dbg(INFO, "firmware not built with -assert\n");
+ else if (sh.flags & SDPCM_SHARED_ASSERT)
+ brcmf_err("assertion in dongle\n");
+
+ if (sh.flags & SDPCM_SHARED_TRAP)
+ brcmf_err("firmware trap in dongle\n");
+
+ return 0;
+}
+
+static int brcmf_sdio_died_dump(struct seq_file *seq, struct brcmf_sdio *bus)
+{
+ int error = 0;
+ struct sdpcm_shared sh;
+
+ error = brcmf_sdio_readshared(bus, &sh);
+ if (error < 0)
+ goto done;
+
+ error = brcmf_sdio_assert_info(seq, bus, &sh);
+ if (error < 0)
+ goto done;
+
+ error = brcmf_sdio_trap_info(seq, bus, &sh);
+ if (error < 0)
+ goto done;
+
+ error = brcmf_sdio_dump_console(seq, bus, &sh);
+
+done:
+ return error;
+}
+
+static int brcmf_sdio_forensic_read(struct seq_file *seq, void *data)
+{
+ struct brcmf_bus *bus_if = dev_get_drvdata(seq->private);
+ struct brcmf_sdio *bus = bus_if->bus_priv.sdio->bus;
+
+ return brcmf_sdio_died_dump(seq, bus);
+}
+
+static int brcmf_debugfs_sdio_count_read(struct seq_file *seq, void *data)
+{
+ struct brcmf_bus *bus_if = dev_get_drvdata(seq->private);
+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+ struct brcmf_sdio_count *sdcnt = &sdiodev->bus->sdcnt;
+
+ seq_printf(seq,
+ "intrcount: %u\nlastintrs: %u\n"
+ "pollcnt: %u\nregfails: %u\n"
+ "tx_sderrs: %u\nfcqueued: %u\n"
+ "rxrtx: %u\nrx_toolong: %u\n"
+ "rxc_errors: %u\nrx_hdrfail: %u\n"
+ "rx_badhdr: %u\nrx_badseq: %u\n"
+ "fc_rcvd: %u\nfc_xoff: %u\n"
+ "fc_xon: %u\nrxglomfail: %u\n"
+ "rxglomframes: %u\nrxglompkts: %u\n"
+ "f2rxhdrs: %u\nf2rxdata: %u\n"
+ "f2txdata: %u\nf1regdata: %u\n"
+ "tickcnt: %u\ntx_ctlerrs: %lu\n"
+ "tx_ctlpkts: %lu\nrx_ctlerrs: %lu\n"
+ "rx_ctlpkts: %lu\nrx_readahead: %lu\n",
+ sdcnt->intrcount, sdcnt->lastintrs,
+ sdcnt->pollcnt, sdcnt->regfails,
+ sdcnt->tx_sderrs, sdcnt->fcqueued,
+ sdcnt->rxrtx, sdcnt->rx_toolong,
+ sdcnt->rxc_errors, sdcnt->rx_hdrfail,
+ sdcnt->rx_badhdr, sdcnt->rx_badseq,
+ sdcnt->fc_rcvd, sdcnt->fc_xoff,
+ sdcnt->fc_xon, sdcnt->rxglomfail,
+ sdcnt->rxglomframes, sdcnt->rxglompkts,
+ sdcnt->f2rxhdrs, sdcnt->f2rxdata,
+ sdcnt->f2txdata, sdcnt->f1regdata,
+ sdcnt->tickcnt, sdcnt->tx_ctlerrs,
+ sdcnt->tx_ctlpkts, sdcnt->rx_ctlerrs,
+ sdcnt->rx_ctlpkts, sdcnt->rx_readahead_cnt);
+
+ return 0;
+}
+
+static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus)
+{
+ struct brcmf_pub *drvr = bus->sdiodev->bus_if->drvr;
+ struct dentry *dentry = brcmf_debugfs_get_devdir(drvr);
+
+ if (IS_ERR_OR_NULL(dentry))
+ return;
+
+ brcmf_debugfs_add_entry(drvr, "forensics", brcmf_sdio_forensic_read);
+ brcmf_debugfs_add_entry(drvr, "counters",
+ brcmf_debugfs_sdio_count_read);
+ debugfs_create_u32("console_interval", 0644, dentry,
+ &bus->console_interval);
+}
+#else
+static int brcmf_sdio_checkdied(struct brcmf_sdio *bus)
+{
+ return 0;
+}
+
+static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus)
+{
+}
+#endif /* DEBUG */
+
+static int
+brcmf_sdio_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
+{
+ int timeleft;
+ uint rxlen = 0;
+ bool pending;
+ u8 *buf;
+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+ struct brcmf_sdio *bus = sdiodev->bus;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ /* Wait until control frame is available */
+ timeleft = brcmf_sdio_dcmd_resp_wait(bus, &bus->rxlen, &pending);
+
+ spin_lock_bh(&bus->rxctl_lock);
+ rxlen = bus->rxlen;
+ memcpy(msg, bus->rxctl, min(msglen, rxlen));
+ bus->rxctl = NULL;
+ buf = bus->rxctl_orig;
+ bus->rxctl_orig = NULL;
+ bus->rxlen = 0;
+ spin_unlock_bh(&bus->rxctl_lock);
+ vfree(buf);
+
+ if (rxlen) {
+ brcmf_dbg(CTL, "resumed on rxctl frame, got %d expected %d\n",
+ rxlen, msglen);
+ } else if (timeleft == 0) {
+ brcmf_err("resumed on timeout\n");
+ brcmf_sdio_checkdied(bus);
+ } else if (pending) {
+ brcmf_dbg(CTL, "cancelled\n");
+ return -ERESTARTSYS;
+ } else {
+ brcmf_dbg(CTL, "resumed for unknown reason?\n");
+ brcmf_sdio_checkdied(bus);
+ }
+
+ if (rxlen)
+ bus->sdcnt.rx_ctlpkts++;
+ else
+ bus->sdcnt.rx_ctlerrs++;
+
+ return rxlen ? (int)rxlen : -ETIMEDOUT;
+}
+
+#ifdef DEBUG
+static bool
+brcmf_sdio_verifymemory(struct brcmf_sdio_dev *sdiodev, u32 ram_addr,
+ u8 *ram_data, uint ram_sz)
+{
+ char *ram_cmp;
+ int err;
+ bool ret = true;
+ int address;
+ int offset;
+ int len;
+
+ /* read back and verify */
+ brcmf_dbg(INFO, "Compare RAM dl & ul at 0x%08x; size=%d\n", ram_addr,
+ ram_sz);
+ ram_cmp = kmalloc(MEMBLOCK, GFP_KERNEL);
+ /* do not proceed while no memory but */
+ if (!ram_cmp)
+ return true;
+
+ address = ram_addr;
+ offset = 0;
+ while (offset < ram_sz) {
+ len = ((offset + MEMBLOCK) < ram_sz) ? MEMBLOCK :
+ ram_sz - offset;
+ err = brcmf_sdiod_ramrw(sdiodev, false, address, ram_cmp, len);
+ if (err) {
+ brcmf_err("error %d on reading %d membytes at 0x%08x\n",
+ err, len, address);
+ ret = false;
+ break;
+ } else if (memcmp(ram_cmp, &ram_data[offset], len)) {
+ brcmf_err("Downloaded RAM image is corrupted, block offset is %d, len is %d\n",
+ offset, len);
+ ret = false;
+ break;
+ }
+ offset += len;
+ address += len;
+ }
+
+ kfree(ram_cmp);
+
+ return ret;
+}
+#else /* DEBUG */
+static bool
+brcmf_sdio_verifymemory(struct brcmf_sdio_dev *sdiodev, u32 ram_addr,
+ u8 *ram_data, uint ram_sz)
+{
+ return true;
+}
+#endif /* DEBUG */
+
+static int brcmf_sdio_download_code_file(struct brcmf_sdio *bus,
+ const struct firmware *fw)
+{
+ int err;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ err = brcmf_sdiod_ramrw(bus->sdiodev, true, bus->ci->rambase,
+ (u8 *)fw->data, fw->size);
+ if (err)
+ brcmf_err("error %d on writing %d membytes at 0x%08x\n",
+ err, (int)fw->size, bus->ci->rambase);
+ else if (!brcmf_sdio_verifymemory(bus->sdiodev, bus->ci->rambase,
+ (u8 *)fw->data, fw->size))
+ err = -EIO;
+
+ return err;
+}
+
+static int brcmf_sdio_download_nvram(struct brcmf_sdio *bus,
+ void *vars, u32 varsz)
+{
+ int address;
+ int err;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ address = bus->ci->ramsize - varsz + bus->ci->rambase;
+ err = brcmf_sdiod_ramrw(bus->sdiodev, true, address, vars, varsz);
+ if (err)
+ brcmf_err("error %d on writing %d nvram bytes at 0x%08x\n",
+ err, varsz, address);
+ else if (!brcmf_sdio_verifymemory(bus->sdiodev, address, vars, varsz))
+ err = -EIO;
+
+ return err;
+}
+
+static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus,
+ const struct firmware *fw,
+ void *nvram, u32 nvlen)
+{
+ int bcmerror = -EFAULT;
+ u32 rstvec;
+
+ sdio_claim_host(bus->sdiodev->func[1]);
+ brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
+
+ /* Keep arm in reset */
+ brcmf_chip_enter_download(bus->ci);
+
+ rstvec = get_unaligned_le32(fw->data);
+ brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec);
+
+ bcmerror = brcmf_sdio_download_code_file(bus, fw);
+ release_firmware(fw);
+ if (bcmerror) {
+ brcmf_err("dongle image file download failed\n");
+ brcmf_fw_nvram_free(nvram);
+ goto err;
+ }
+
+ bcmerror = brcmf_sdio_download_nvram(bus, nvram, nvlen);
+ brcmf_fw_nvram_free(nvram);
+ if (bcmerror) {
+ brcmf_err("dongle nvram file download failed\n");
+ goto err;
+ }
+
+ /* Take arm out of reset */
+ if (!brcmf_chip_exit_download(bus->ci, rstvec)) {
+ brcmf_err("error getting out of ARM core reset\n");
+ goto err;
+ }
+
+ /* Allow HT Clock now that the ARM is running. */
+ brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_LOAD);
+ bcmerror = 0;
+
+err:
+ brcmf_sdio_clkctl(bus, CLK_SDONLY, false);
+ sdio_release_host(bus->sdiodev->func[1]);
+ return bcmerror;
+}
+
+static void brcmf_sdio_sr_init(struct brcmf_sdio *bus)
+{
+ int err = 0;
+ u8 val;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err);
+ if (err) {
+ brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n");
+ return;
+ }
+
+ val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT;
+ brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err);
+ if (err) {
+ brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n");
+ return;
+ }
+
+ /* Add CMD14 Support */
+ brcmf_sdiod_regwb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP,
+ (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
+ SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT),
+ &err);
+ if (err) {
+ brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n");
+ return;
+ }
+
+ brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ SBSDIO_FORCE_HT, &err);
+ if (err) {
+ brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n");
+ return;
+ }
+
+ /* set flag */
+ bus->sr_enabled = true;
+ brcmf_dbg(INFO, "SR enabled\n");
+}
+
+/* enable KSO bit */
+static int brcmf_sdio_kso_init(struct brcmf_sdio *bus)
+{
+ u8 val;
+ int err = 0;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ /* KSO bit added in SDIO core rev 12 */
+ if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12)
+ return 0;
+
+ val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err);
+ if (err) {
+ brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n");
+ return err;
+ }
+
+ if (!(val & SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) {
+ val |= (SBSDIO_FUNC1_SLEEPCSR_KSO_EN <<
+ SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
+ brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
+ val, &err);
+ if (err) {
+ brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n");
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+
+static int brcmf_sdio_bus_preinit(struct device *dev)
+{
+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+ struct brcmf_sdio *bus = sdiodev->bus;
+ uint pad_size;
+ u32 value;
+ int err;
+
+ /* the commands below use the terms tx and rx from
+ * a device perspective, ie. bus:txglom affects the
+ * bus transfers from device to host.
+ */
+ if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12) {
+ /* for sdio core rev < 12, disable txgloming */
+ value = 0;
+ err = brcmf_iovar_data_set(dev, "bus:txglom", &value,
+ sizeof(u32));
+ } else {
+ /* otherwise, set txglomalign */
+ value = 4;
+ if (sdiodev->pdata)
+ value = sdiodev->pdata->sd_sgentry_align;
+ /* SDIO ADMA requires at least 32 bit alignment */
+ value = max_t(u32, value, 4);
+ err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value,
+ sizeof(u32));
+ }
+
+ if (err < 0)
+ goto done;
+
+ bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN;
+ if (sdiodev->sg_support) {
+ bus->txglom = false;
+ value = 1;
+ pad_size = bus->sdiodev->func[2]->cur_blksize << 1;
+ err = brcmf_iovar_data_set(bus->sdiodev->dev, "bus:rxglom",
+ &value, sizeof(u32));
+ if (err < 0) {
+ /* bus:rxglom is allowed to fail */
+ err = 0;
+ } else {
+ bus->txglom = true;
+ bus->tx_hdrlen += SDPCM_HWEXT_LEN;
+ }
+ }
+ brcmf_bus_add_txhdrlen(bus->sdiodev->dev, bus->tx_hdrlen);
+
+done:
+ return err;
+}
+
+void brcmf_sdio_isr(struct brcmf_sdio *bus)
+{
+ brcmf_dbg(TRACE, "Enter\n");
+
+ if (!bus) {
+ brcmf_err("bus is null pointer, exiting\n");
+ return;
+ }
+
+ if (!brcmf_bus_ready(bus->sdiodev->bus_if)) {
+ brcmf_err("bus is down. we have nothing to do\n");
+ return;
+ }
+ /* Count the interrupt call */
+ bus->sdcnt.intrcount++;
+ if (in_interrupt())
+ atomic_set(&bus->ipend, 1);
+ else
+ if (brcmf_sdio_intr_rstatus(bus)) {
+ brcmf_err("failed backplane access\n");
+ }
+
+ /* Disable additional interrupts (is this needed now)? */
+ if (!bus->intr)
+ brcmf_err("isr w/o interrupt configured!\n");
+
+ atomic_inc(&bus->dpc_tskcnt);
+ queue_work(bus->brcmf_wq, &bus->datawork);
+}
+
+static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
+{
+#ifdef DEBUG
+ struct brcmf_bus *bus_if = dev_get_drvdata(bus->sdiodev->dev);
+#endif /* DEBUG */
+
+ brcmf_dbg(TIMER, "Enter\n");
+
+ /* Poll period: check device if appropriate. */
+ if (!bus->sr_enabled &&
+ bus->poll && (++bus->polltick >= bus->pollrate)) {
+ u32 intstatus = 0;
+
+ /* Reset poll tick */
+ bus->polltick = 0;
+
+ /* Check device if no interrupts */
+ if (!bus->intr ||
+ (bus->sdcnt.intrcount == bus->sdcnt.lastintrs)) {
+
+ if (atomic_read(&bus->dpc_tskcnt) == 0) {
+ u8 devpend;
+
+ sdio_claim_host(bus->sdiodev->func[1]);
+ devpend = brcmf_sdiod_regrb(bus->sdiodev,
+ SDIO_CCCR_INTx,
+ NULL);
+ sdio_release_host(bus->sdiodev->func[1]);
+ intstatus =
+ devpend & (INTR_STATUS_FUNC1 |
+ INTR_STATUS_FUNC2);
+ }
+
+ /* If there is something, make like the ISR and
+ schedule the DPC */
+ if (intstatus) {
+ bus->sdcnt.pollcnt++;
+ atomic_set(&bus->ipend, 1);
+
+ atomic_inc(&bus->dpc_tskcnt);
+ queue_work(bus->brcmf_wq, &bus->datawork);
+ }
+ }
+
+ /* Update interrupt tracking */
+ bus->sdcnt.lastintrs = bus->sdcnt.intrcount;
+ }
+#ifdef DEBUG
+ /* Poll for console output periodically */
+ if (bus_if && bus_if->state == BRCMF_BUS_DATA &&
+ bus->console_interval != 0) {
+ bus->console.count += BRCMF_WD_POLL_MS;
+ if (bus->console.count >= bus->console_interval) {
+ bus->console.count -= bus->console_interval;
+ sdio_claim_host(bus->sdiodev->func[1]);
+ /* Make sure backplane clock is on */
+ brcmf_sdio_bus_sleep(bus, false, false);
+ if (brcmf_sdio_readconsole(bus) < 0)
+ /* stop on error */
+ bus->console_interval = 0;
+ sdio_release_host(bus->sdiodev->func[1]);
+ }
+ }
+#endif /* DEBUG */
+
+ /* On idle timeout clear activity flag and/or turn off clock */
+ if ((bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) {
+ if (++bus->idlecount >= bus->idletime) {
+ bus->idlecount = 0;
+ if (bus->activity) {
+ bus->activity = false;
+ brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
+ } else {
+ brcmf_dbg(SDIO, "idle\n");
+ sdio_claim_host(bus->sdiodev->func[1]);
+ brcmf_sdio_bus_sleep(bus, true, false);
+ sdio_release_host(bus->sdiodev->func[1]);
+ }
+ }
+ }
+
+ return (atomic_read(&bus->ipend) > 0);
+}
+
+static void brcmf_sdio_dataworker(struct work_struct *work)
+{
+ struct brcmf_sdio *bus = container_of(work, struct brcmf_sdio,
+ datawork);
+
+ while (atomic_read(&bus->dpc_tskcnt)) {
+ atomic_set(&bus->dpc_tskcnt, 0);
+ brcmf_sdio_dpc(bus);
+ }
+}
+
+static void
+brcmf_sdio_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
+ struct brcmf_chip *ci, u32 drivestrength)
+{
+ const struct sdiod_drive_str *str_tab = NULL;
+ u32 str_mask;
+ u32 str_shift;
+ u32 base;
+ u32 i;
+ u32 drivestrength_sel = 0;
+ u32 cc_data_temp;
+ u32 addr;
+
+ if (!(ci->cc_caps & CC_CAP_PMU))
+ return;
+
+ switch (SDIOD_DRVSTR_KEY(ci->chip, ci->pmurev)) {
+ case SDIOD_DRVSTR_KEY(BRCM_CC_4330_CHIP_ID, 12):
+ str_tab = sdiod_drvstr_tab1_1v8;
+ str_mask = 0x00003800;
+ str_shift = 11;
+ break;
+ case SDIOD_DRVSTR_KEY(BRCM_CC_4334_CHIP_ID, 17):
+ str_tab = sdiod_drvstr_tab6_1v8;
+ str_mask = 0x00001800;
+ str_shift = 11;
+ break;
+ case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17):
+ /* note: 43143 does not support tristate */
+ i = ARRAY_SIZE(sdiod_drvstr_tab2_3v3) - 1;
+ if (drivestrength >= sdiod_drvstr_tab2_3v3[i].strength) {
+ str_tab = sdiod_drvstr_tab2_3v3;
+ str_mask = 0x00000007;
+ str_shift = 0;
+ } else
+ brcmf_err("Invalid SDIO Drive strength for chip %s, strength=%d\n",
+ ci->name, drivestrength);
+ break;
+ case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13):
+ str_tab = sdiod_drive_strength_tab5_1v8;
+ str_mask = 0x00003800;
+ str_shift = 11;
+ break;
+ default:
+ brcmf_err("No SDIO Drive strength init done for chip %s rev %d pmurev %d\n",
+ ci->name, ci->chiprev, ci->pmurev);
+ break;
+ }
+
+ if (str_tab != NULL) {
+ for (i = 0; str_tab[i].strength != 0; i++) {
+ if (drivestrength >= str_tab[i].strength) {
+ drivestrength_sel = str_tab[i].sel;
+ break;
+ }
+ }
+ base = brcmf_chip_get_chipcommon(ci)->base;
+ addr = CORE_CC_REG(base, chipcontrol_addr);
+ brcmf_sdiod_regwl(sdiodev, addr, 1, NULL);
+ cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL);
+ cc_data_temp &= ~str_mask;
+ drivestrength_sel <<= str_shift;
+ cc_data_temp |= drivestrength_sel;
+ brcmf_sdiod_regwl(sdiodev, addr, cc_data_temp, NULL);
+
+ brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n",
+ str_tab[i].strength, drivestrength, cc_data_temp);
+ }
+}
+
+static int brcmf_sdio_buscoreprep(void *ctx)
+{
+ struct brcmf_sdio_dev *sdiodev = ctx;
+ int err = 0;
+ u8 clkval, clkset;
+
+ /* Try forcing SDIO core to do ALPAvail request only */
+ clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ;
+ brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+ if (err) {
+ brcmf_err("error writing for HT off\n");
+ return err;
+ }
+
+ /* If register supported, wait for ALPAvail and then force ALP */
+ /* This may take up to 15 milliseconds */
+ clkval = brcmf_sdiod_regrb(sdiodev,
+ SBSDIO_FUNC1_CHIPCLKCSR, NULL);
+
+ if ((clkval & ~SBSDIO_AVBITS) != clkset) {
+ brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n",
+ clkset, clkval);
+ return -EACCES;
+ }
+
+ SPINWAIT(((clkval = brcmf_sdiod_regrb(sdiodev,
+ SBSDIO_FUNC1_CHIPCLKCSR, NULL)),
+ !SBSDIO_ALPAV(clkval)),
+ PMU_MAX_TRANSITION_DLY);
+ if (!SBSDIO_ALPAV(clkval)) {
+ brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n",
+ clkval);
+ return -EBUSY;
+ }
+
+ clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP;
+ brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+ udelay(65);
+
+ /* Also, disable the extra SDIO pull-ups */
+ brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
+
+ return 0;
+}
+
+static void brcmf_sdio_buscore_exitdl(void *ctx, struct brcmf_chip *chip,
+ u32 rstvec)
+{
+ struct brcmf_sdio_dev *sdiodev = ctx;
+ struct brcmf_core *core;
+ u32 reg_addr;
+
+ /* clear all interrupts */
+ core = brcmf_chip_get_core(chip, BCMA_CORE_SDIO_DEV);
+ reg_addr = core->base + offsetof(struct sdpcmd_regs, intstatus);
+ brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
+
+ if (rstvec)
+ /* Write reset vector to address 0 */
+ brcmf_sdiod_ramrw(sdiodev, true, 0, (void *)&rstvec,
+ sizeof(rstvec));
+}
+
+static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr)
+{
+ struct brcmf_sdio_dev *sdiodev = ctx;
+ u32 val, rev;
+
+ val = brcmf_sdiod_regrl(sdiodev, addr, NULL);
+ if (sdiodev->func[0]->device == BRCM_SDIO_4335_4339_DEVICE_ID &&
+ addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
+ rev = (val & CID_REV_MASK) >> CID_REV_SHIFT;
+ if (rev >= 2) {
+ val &= ~CID_ID_MASK;
+ val |= BRCM_CC_4339_CHIP_ID;
+ }
+ }
+ return val;
+}
+
+static void brcmf_sdio_buscore_write32(void *ctx, u32 addr, u32 val)
+{
+ struct brcmf_sdio_dev *sdiodev = ctx;
+
+ brcmf_sdiod_regwl(sdiodev, addr, val, NULL);
+}
+
+static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = {
+ .prepare = brcmf_sdio_buscoreprep,
+ .exit_dl = brcmf_sdio_buscore_exitdl,
+ .read32 = brcmf_sdio_buscore_read32,
+ .write32 = brcmf_sdio_buscore_write32,
+};
+
+static bool
+brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
+{
+ u8 clkctl = 0;
+ int err = 0;
+ int reg_addr;
+ u32 reg_val;
+ u32 drivestrength;
+
+ sdio_claim_host(bus->sdiodev->func[1]);
+
+ pr_debug("F1 signature read @0x18000000=0x%4x\n",
+ brcmf_sdiod_regrl(bus->sdiodev, SI_ENUM_BASE, NULL));
+
+ /*
+ * Force PLL off until brcmf_chip_attach()
+ * programs PLL control regs
+ */
+
+ brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ BRCMF_INIT_CLKCTL1, &err);
+ if (!err)
+ clkctl = brcmf_sdiod_regrb(bus->sdiodev,
+ SBSDIO_FUNC1_CHIPCLKCSR, &err);
+
+ if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {
+ brcmf_err("ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n",
+ err, BRCMF_INIT_CLKCTL1, clkctl);
+ goto fail;
+ }
+
+ /* SDIO register access works so moving
+ * state from UNKNOWN to DOWN.
+ */
+ brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_DOWN);
+
+ bus->ci = brcmf_chip_attach(bus->sdiodev, &brcmf_sdio_buscore_ops);
+ if (IS_ERR(bus->ci)) {
+ brcmf_err("brcmf_chip_attach failed!\n");
+ bus->ci = NULL;
+ goto fail;
+ }
+
+ if (brcmf_sdio_kso_init(bus)) {
+ brcmf_err("error enabling KSO\n");
+ goto fail;
+ }
+
+ if ((bus->sdiodev->pdata) && (bus->sdiodev->pdata->drive_strength))
+ drivestrength = bus->sdiodev->pdata->drive_strength;
+ else
+ drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH;
+ brcmf_sdio_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength);
+
+ /* Get info on the SOCRAM cores... */
+ bus->ramsize = bus->ci->ramsize;
+ if (!(bus->ramsize)) {
+ brcmf_err("failed to find SOCRAM memory!\n");
+ goto fail;
+ }
+
+ /* Set card control so an SDIO card reset does a WLAN backplane reset */
+ reg_val = brcmf_sdiod_regrb(bus->sdiodev,
+ SDIO_CCCR_BRCM_CARDCTRL, &err);
+ if (err)
+ goto fail;
+
+ reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET;
+
+ brcmf_sdiod_regwb(bus->sdiodev,
+ SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
+ if (err)
+ goto fail;
+
+ /* set PMUControl so a backplane reset does PMU state reload */
+ reg_addr = CORE_CC_REG(brcmf_chip_get_chipcommon(bus->ci)->base,
+ pmucontrol);
+ reg_val = brcmf_sdiod_regrl(bus->sdiodev, reg_addr, &err);
+ if (err)
+ goto fail;
+
+ reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT);
+
+ brcmf_sdiod_regwl(bus->sdiodev, reg_addr, reg_val, &err);
+ if (err)
+ goto fail;
+
+ sdio_release_host(bus->sdiodev->func[1]);
+
+ brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN);
+
+ /* allocate header buffer */
+ bus->hdrbuf = kzalloc(MAX_HDR_READ + bus->head_align, GFP_KERNEL);
+ if (!bus->hdrbuf)
+ return false;
+ /* Locate an appropriately-aligned portion of hdrbuf */
+ bus->rxhdr = (u8 *) roundup((unsigned long)&bus->hdrbuf[0],
+ bus->head_align);
+
+ /* Set the poll and/or interrupt flags */
+ bus->intr = true;
+ bus->poll = false;
+ if (bus->poll)
+ bus->pollrate = 1;
+
+ return true;
+
+fail:
+ sdio_release_host(bus->sdiodev->func[1]);
+ return false;
+}
+
+static int
+brcmf_sdio_watchdog_thread(void *data)
+{
+ struct brcmf_sdio *bus = (struct brcmf_sdio *)data;
+
+ allow_signal(SIGTERM);
+ /* Run until signal received */
+ while (1) {
+ if (kthread_should_stop())
+ break;
+ if (!wait_for_completion_interruptible(&bus->watchdog_wait)) {
+ brcmf_sdio_bus_watchdog(bus);
+ /* Count the tick for reference */
+ bus->sdcnt.tickcnt++;
+ reinit_completion(&bus->watchdog_wait);
+ } else
+ break;
+ }
+ return 0;
+}
+
+static void
+brcmf_sdio_watchdog(unsigned long data)
+{
+ struct brcmf_sdio *bus = (struct brcmf_sdio *)data;
+
+ if (bus->watchdog_tsk) {
+ complete(&bus->watchdog_wait);
+ /* Reschedule the watchdog */
+ if (bus->wd_timer_valid)
+ mod_timer(&bus->timer,
+ jiffies + BRCMF_WD_POLL_MS * HZ / 1000);
+ }
+}
+
+static struct brcmf_bus_ops brcmf_sdio_bus_ops = {
+ .stop = brcmf_sdio_bus_stop,
+ .preinit = brcmf_sdio_bus_preinit,
+ .txdata = brcmf_sdio_bus_txdata,
+ .txctl = brcmf_sdio_bus_txctl,
+ .rxctl = brcmf_sdio_bus_rxctl,
+ .gettxq = brcmf_sdio_bus_gettxq,
+ .wowl_config = brcmf_sdio_wowl_config
+};
+
+static void brcmf_sdio_firmware_callback(struct device *dev,
+ const struct firmware *code,
+ void *nvram, u32 nvram_len)
+{
+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+ struct brcmf_sdio *bus = sdiodev->bus;
+ int err = 0;
+ u8 saveclk;
+
+ brcmf_dbg(TRACE, "Enter: dev=%s\n", dev_name(dev));
+
+ /* try to download image and nvram to the dongle */
+ if (bus_if->state == BRCMF_BUS_DOWN) {
+ bus->alp_only = true;
+ err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len);
+ if (err)
+ goto fail;
+ bus->alp_only = false;
+ }
+
+ if (!bus_if->drvr)
+ return;
+
+ /* Start the watchdog timer */
+ bus->sdcnt.tickcnt = 0;
+ brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
+
+ sdio_claim_host(sdiodev->func[1]);
+
+ /* Make sure backplane clock is on, needed to generate F2 interrupt */
+ brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
+ if (bus->clkstate != CLK_AVAIL)
+ goto release;
+
+ /* Force clocks on backplane to be sure F2 interrupt propagates */
+ saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err);
+ if (!err) {
+ brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ (saveclk | SBSDIO_FORCE_HT), &err);
+ }
+ if (err) {
+ brcmf_err("Failed to force clock for F2: err %d\n", err);
+ goto release;
+ }
+
+ /* Enable function 2 (frame transfers) */
+ w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT,
+ offsetof(struct sdpcmd_regs, tosbmailboxdata));
+ err = sdio_enable_func(sdiodev->func[SDIO_FUNC_2]);
+
+
+ brcmf_dbg(INFO, "enable F2: err=%d\n", err);
+
+ /* If F2 successfully enabled, set core and enable interrupts */
+ if (!err) {
+ /* Set up the interrupt mask and enable interrupts */
+ bus->hostintmask = HOSTINTMASK;
+ w_sdreg32(bus, bus->hostintmask,
+ offsetof(struct sdpcmd_regs, hostintmask));
+
+ brcmf_sdiod_regwb(sdiodev, SBSDIO_WATERMARK, 8, &err);
+ } else {
+ /* Disable F2 again */
+ sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
+ goto release;
+ }
+
+ if (brcmf_chip_sr_capable(bus->ci)) {
+ brcmf_sdio_sr_init(bus);
+ } else {
+ /* Restore previous clock setting */
+ brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ saveclk, &err);
+ }
+
+ if (err == 0) {
+ err = brcmf_sdiod_intr_register(sdiodev);
+ if (err != 0)
+ brcmf_err("intr register failed:%d\n", err);
+ }
+
+ /* If we didn't come up, turn off backplane clock */
+ if (err != 0)
+ brcmf_sdio_clkctl(bus, CLK_NONE, false);
+
+ sdio_release_host(sdiodev->func[1]);
+
+ err = brcmf_bus_start(dev);
+ if (err != 0) {
+ brcmf_err("dongle is not responding\n");
+ goto fail;
+ }
+ return;
+
+release:
+ sdio_release_host(sdiodev->func[1]);
+fail:
+ brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), err);
+ device_release_driver(dev);
+}
+
+struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
+{
+ int ret;
+ struct brcmf_sdio *bus;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ /* Allocate private bus interface state */
+ bus = kzalloc(sizeof(struct brcmf_sdio), GFP_ATOMIC);
+ if (!bus)
+ goto fail;
+
+ bus->sdiodev = sdiodev;
+ sdiodev->bus = bus;
+ skb_queue_head_init(&bus->glom);
+ bus->txbound = BRCMF_TXBOUND;
+ bus->rxbound = BRCMF_RXBOUND;
+ bus->txminmax = BRCMF_TXMINMAX;
+ bus->tx_seq = SDPCM_SEQ_WRAP - 1;
+
+ /* platform specific configuration:
+ * alignments must be at least 4 bytes for ADMA
+ */
+ bus->head_align = ALIGNMENT;
+ bus->sgentry_align = ALIGNMENT;
+ if (sdiodev->pdata) {
+ if (sdiodev->pdata->sd_head_align > ALIGNMENT)
+ bus->head_align = sdiodev->pdata->sd_head_align;
+ if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT)
+ bus->sgentry_align = sdiodev->pdata->sd_sgentry_align;
+ }
+
+ INIT_WORK(&bus->datawork, brcmf_sdio_dataworker);
+ bus->brcmf_wq = create_singlethread_workqueue("brcmf_wq");
+ if (bus->brcmf_wq == NULL) {
+ brcmf_err("insufficient memory to create txworkqueue\n");
+ goto fail;
+ }
+
+ /* attempt to attach to the dongle */
+ if (!(brcmf_sdio_probe_attach(bus))) {
+ brcmf_err("brcmf_sdio_probe_attach failed\n");
+ goto fail;
+ }
+
+ spin_lock_init(&bus->rxctl_lock);
+ spin_lock_init(&bus->txq_lock);
+ sema_init(&bus->tx_seq_lock, 1);
+ init_waitqueue_head(&bus->ctrl_wait);
+ init_waitqueue_head(&bus->dcmd_resp_wait);
+
+ /* Set up the watchdog timer */
+ init_timer(&bus->timer);
+ bus->timer.data = (unsigned long)bus;
+ bus->timer.function = brcmf_sdio_watchdog;
+
+ /* Initialize watchdog thread */
+ init_completion(&bus->watchdog_wait);
+ bus->watchdog_tsk = kthread_run(brcmf_sdio_watchdog_thread,
+ bus, "brcmf_watchdog");
+ if (IS_ERR(bus->watchdog_tsk)) {
+ pr_warn("brcmf_watchdog thread failed to start\n");
+ bus->watchdog_tsk = NULL;
+ }
+ /* Initialize DPC thread */
+ atomic_set(&bus->dpc_tskcnt, 0);
+
+ /* Assign bus interface call back */
+ bus->sdiodev->bus_if->dev = bus->sdiodev->dev;
+ bus->sdiodev->bus_if->ops = &brcmf_sdio_bus_ops;
+ bus->sdiodev->bus_if->chip = bus->ci->chip;
+ bus->sdiodev->bus_if->chiprev = bus->ci->chiprev;
+
+ /* default sdio bus header length for tx packet */
+ bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN;
+
+ /* Attach to the common layer, reserve hdr space */
+ ret = brcmf_attach(bus->sdiodev->dev);
+ if (ret != 0) {
+ brcmf_err("brcmf_attach failed\n");
+ goto fail;
+ }
+
+ /* Query the F2 block size, set roundup accordingly */
+ bus->blocksize = bus->sdiodev->func[2]->cur_blksize;
+ bus->roundup = min(max_roundup, bus->blocksize);
+
+ /* Allocate buffers */
+ if (bus->sdiodev->bus_if->maxctl) {
+ bus->sdiodev->bus_if->maxctl += bus->roundup;
+ bus->rxblen =
+ roundup((bus->sdiodev->bus_if->maxctl + SDPCM_HDRLEN),
+ ALIGNMENT) + bus->head_align;
+ bus->rxbuf = kmalloc(bus->rxblen, GFP_ATOMIC);
+ if (!(bus->rxbuf)) {
+ brcmf_err("rxbuf allocation failed\n");
+ goto fail;
+ }
+ }
+
+ sdio_claim_host(bus->sdiodev->func[1]);
+
+ /* Disable F2 to clear any intermediate frame state on the dongle */
+ sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]);
+
+ bus->rxflow = false;
+
+ /* Done with backplane-dependent accesses, can drop clock... */
+ brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
+
+ sdio_release_host(bus->sdiodev->func[1]);
+
+ /* ...and initialize clock/power states */
+ bus->clkstate = CLK_SDONLY;
+ bus->idletime = BRCMF_IDLE_INTERVAL;
+ bus->idleclock = BRCMF_IDLE_ACTIVE;
+
+ /* SR state */
+ bus->sleeping = false;
+ bus->sr_enabled = false;
+
+ brcmf_sdio_debugfs_create(bus);
+ brcmf_dbg(INFO, "completed!!\n");
+
+ ret = brcmf_sdio_get_fwnames(bus->ci, sdiodev);
+ if (ret)
+ goto fail;
+
+ ret = brcmf_fw_get_firmwares(sdiodev->dev, BRCMF_FW_REQUEST_NVRAM,
+ sdiodev->fw_name, sdiodev->nvram_name,
+ brcmf_sdio_firmware_callback);
+ if (ret != 0) {
+ brcmf_err("async firmware request failed: %d\n", ret);
+ goto fail;
+ }
+
+ return bus;
+
+fail:
+ brcmf_sdio_remove(bus);
+ return NULL;
+}
+
+/* Detach and free everything */
+void brcmf_sdio_remove(struct brcmf_sdio *bus)
+{
+ brcmf_dbg(TRACE, "Enter\n");
+
+ if (bus) {
+ /* De-register interrupt handler */
+ brcmf_sdiod_intr_unregister(bus->sdiodev);
+
+ brcmf_detach(bus->sdiodev->dev);
+
+ cancel_work_sync(&bus->datawork);
+ if (bus->brcmf_wq)
+ destroy_workqueue(bus->brcmf_wq);
+
+ if (bus->ci) {
+ if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) {
+ sdio_claim_host(bus->sdiodev->func[1]);
+ brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
+ /* Leave the device in state where it is
+ * 'quiet'. This is done by putting it in
+ * download_state which essentially resets
+ * all necessary cores.
+ */
+ msleep(20);
+ brcmf_chip_enter_download(bus->ci);
+ brcmf_sdio_clkctl(bus, CLK_NONE, false);
+ sdio_release_host(bus->sdiodev->func[1]);
+ }
+ brcmf_chip_detach(bus->ci);
+ }
+
+ kfree(bus->rxbuf);
+ kfree(bus->hdrbuf);
+ kfree(bus);
+ }
+
+ brcmf_dbg(TRACE, "Disconnected\n");
+}
+
+void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick)
+{
+ /* Totally stop the timer */
+ if (!wdtick && bus->wd_timer_valid) {
+ del_timer_sync(&bus->timer);
+ bus->wd_timer_valid = false;
+ bus->save_ms = wdtick;
+ return;
+ }
+
+ /* don't start the wd until fw is loaded */
+ if (bus->sdiodev->bus_if->state != BRCMF_BUS_DATA)
+ return;
+
+ if (wdtick) {
+ if (bus->save_ms != BRCMF_WD_POLL_MS) {
+ if (bus->wd_timer_valid)
+ /* Stop timer and restart at new value */
+ del_timer_sync(&bus->timer);
+
+ /* Create timer again when watchdog period is
+ dynamically changed or in the first instance
+ */
+ bus->timer.expires =
+ jiffies + BRCMF_WD_POLL_MS * HZ / 1000;
+ add_timer(&bus->timer);
+
+ } else {
+ /* Re arm the timer, at last watchdog period */
+ mod_timer(&bus->timer,
+ jiffies + BRCMF_WD_POLL_MS * HZ / 1000);
+ }
+
+ bus->wd_timer_valid = true;
+ bus->save_ms = wdtick;
+ }
+}