isci: move remote_device handling out of the core
Now that the core/lldd remote_device data structures are nominally unified
merge the corresponding sources into the top-level directory. Also move the
remote_node_context infrastructure which has no analog at the lldd level.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile
index 522e7a7..ccc8c53 100644
--- a/drivers/scsi/isci/Makefile
+++ b/drivers/scsi/isci/Makefile
@@ -10,20 +10,19 @@
isci-objs := init.o phy.o request.o sata.o \
remote_device.o port.o timers.o \
host.o task.o probe_roms.o \
+ stp_remote_device.o \
+ smp_remote_device.o \
+ remote_node_context.o \
+ remote_node_table.o \
core/scic_sds_controller.o \
- core/scic_sds_remote_device.o \
core/scic_sds_request.o \
core/scic_sds_stp_request.o \
core/scic_sds_stp_packet_request.o \
- core/scic_sds_stp_remote_device.o \
core/scic_sds_port.o \
core/scic_sds_port_configuration_agent.o \
core/scic_sds_phy.o \
core/scic_sds_ssp_request.o \
- core/scic_sds_remote_node_context.o \
core/scic_sds_smp_request.o \
- core/scic_sds_smp_remote_device.o \
- core/scic_sds_remote_node_table.o \
core/scic_sds_unsolicited_frame_control.o \
core/sci_base_state_machine.o \
core/sci_util.o
diff --git a/drivers/scsi/isci/core/scic_remote_device.h b/drivers/scsi/isci/core/scic_remote_device.h
deleted file mode 100644
index 23e90af5..0000000
--- a/drivers/scsi/isci/core/scic_remote_device.h
+++ /dev/null
@@ -1,282 +0,0 @@
-/*
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _SCIC_REMOTE_DEVICE_H_
-#define _SCIC_REMOTE_DEVICE_H_
-
-/**
- * This file contains all of the interface methods that can be called by an
- * SCIC user on the device object.
- *
- *
- */
-
-
-#include "sci_status.h"
-#include "intel_sas.h"
-
-struct scic_sds_port;
-struct scic_sds_remote_device;
-
-/**
- *
- *
- *
- */
-enum scic_remote_device_not_ready_reason_code {
- SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED,
- SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED,
- SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED,
- SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED,
- SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED,
-
- SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX
-
-};
-
-/**
- * scic_remote_device_construct() - This method will perform the construction
- * common to all remote device objects.
- * @sci_port: SAS/SATA port through which this device is accessed.
- * @sci_dev: remote device to construct
- *
- * It isn't necessary to call scic_remote_device_destruct() for device objects
- * that have only called this method for construction. Once subsequent
- * construction methods have been invoked (e.g.
- * scic_remote_device_da_construct()), then destruction should occur. none
- */
-void scic_remote_device_construct(struct scic_sds_port *sci_port,
- struct scic_sds_remote_device *sci_dev);
-
-/**
- * scic_remote_device_da_construct() - This method will construct a
- * SCIC_REMOTE_DEVICE object for a direct attached (da) device. The
- * information (e.g. IAF, Signature FIS, etc.) necessary to build the device
- * is known to the SCI Core since it is contained in the scic_phy object.
- * @remote_device: This parameter specifies the remote device to be destructed.
- *
- * The user must have previously called scic_remote_device_construct() Remote
- * device objects are a limited resource. As such, they must be protected.
- * Thus calls to construct and destruct are mutually exclusive and
- * non-reentrant. Indicate if the remote device was successfully constructed.
- * SCI_SUCCESS Returned if the device was successfully constructed.
- * SCI_FAILURE_DEVICE_EXISTS Returned if the device has already been
- * constructed. If it's an additional phy for the target, then call
- * scic_remote_device_da_add_phy(). SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned
- * if the supplied parameters necessitate creation of a remote device for which
- * the protocol is not supported by the underlying controller hardware.
- * SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if the core
- * controller associated with the supplied parameters is unable to support
- * additional remote devices.
- */
-enum sci_status scic_remote_device_da_construct(
- struct scic_sds_remote_device *remote_device);
-
-/**
- * scic_remote_device_ea_construct() - This method will construct an
- * SCIC_REMOTE_DEVICE object for an expander attached (ea) device from an
- * SMP Discover Response.
- * @remote_device: This parameter specifies the remote device to be destructed.
- * @discover_response: This parameter specifies the SMP Discovery Response to
- * be used in device creation.
- *
- * The user must have previously called scic_remote_device_construct() Remote
- * device objects are a limited resource. As such, they must be protected.
- * Thus calls to construct and destruct are mutually exclusive and
- * non-reentrant. Indicate if the remote device was successfully constructed.
- * SCI_SUCCESS Returned if the device was successfully constructed.
- * SCI_FAILURE_DEVICE_EXISTS Returned if the device has already been
- * constructed. If it's an additional phy for the target, then call
- * scic_ea_remote_device_add_phy(). SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned
- * if the supplied parameters necessitate creation of a remote device for which
- * the protocol is not supported by the underlying controller hardware.
- * SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if the core
- * controller associated with the supplied parameters is unable to support
- * additional remote devices.
- */
-enum sci_status scic_remote_device_ea_construct(
- struct scic_sds_remote_device *remote_device,
- struct smp_response_discover *discover_response);
-
-/**
- * scic_remote_device_destruct() - This method is utilized to free up a core's
- * remote device object.
- * @remote_device: This parameter specifies the remote device to be destructed.
- *
- * Remote device objects are a limited resource. As such, they must be
- * protected. Thus calls to construct and destruct are mutually exclusive and
- * non-reentrant. The return value shall indicate if the device was
- * successfully destructed or if some failure occurred. enum sci_status This value
- * is returned if the device is successfully destructed.
- * SCI_FAILURE_INVALID_REMOTE_DEVICE This value is returned if the supplied
- * device isn't valid (e.g. it's already been destoryed, the handle isn't
- * valid, etc.).
- */
-enum sci_status scic_remote_device_destruct(
- struct scic_sds_remote_device *remote_device);
-
-
-
-
-
-/**
- * scic_remote_device_start() - This method will start the supplied remote
- * device. This method enables normal IO requests to flow through to the
- * remote device.
- * @remote_device: This parameter specifies the device to be started.
- * @timeout: This parameter specifies the number of milliseconds in which the
- * start operation should complete.
- *
- * An indication of whether the device was successfully started. SCI_SUCCESS
- * This value is returned if the device was successfully started.
- * SCI_FAILURE_INVALID_PHY This value is returned if the user attempts to start
- * the device when there have been no phys added to it.
- */
-enum sci_status scic_remote_device_start(
- struct scic_sds_remote_device *remote_device,
- u32 timeout);
-
-/**
- * scic_remote_device_stop() - This method will stop both transmission and
- * reception of link activity for the supplied remote device. This method
- * disables normal IO requests from flowing through to the remote device.
- * @remote_device: This parameter specifies the device to be stopped.
- * @timeout: This parameter specifies the number of milliseconds in which the
- * stop operation should complete.
- *
- * An indication of whether the device was successfully stopped. SCI_SUCCESS
- * This value is returned if the transmission and reception for the device was
- * successfully stopped.
- */
-enum sci_status scic_remote_device_stop(
- struct scic_sds_remote_device *remote_device,
- u32 timeout);
-
-/**
- * scic_remote_device_reset() - This method will reset the device making it
- * ready for operation. This method must be called anytime the device is
- * reset either through a SMP phy control or a port hard reset request.
- * @remote_device: This parameter specifies the device to be reset.
- *
- * This method does not actually cause the device hardware to be reset. This
- * method resets the software object so that it will be operational after a
- * device hardware reset completes. An indication of whether the device reset
- * was accepted. SCI_SUCCESS This value is returned if the device reset is
- * started.
- */
-enum sci_status scic_remote_device_reset(
- struct scic_sds_remote_device *remote_device);
-
-/**
- * scic_remote_device_reset_complete() - This method informs the device object
- * that the reset operation is complete and the device can resume operation
- * again.
- * @remote_device: This parameter specifies the device which is to be informed
- * of the reset complete operation.
- *
- * An indication that the device is resuming operation. SCI_SUCCESS the device
- * is resuming operation.
- */
-enum sci_status scic_remote_device_reset_complete(
- struct scic_sds_remote_device *remote_device);
-
-
-
-/**
- * scic_remote_device_get_connection_rate() - This method simply returns the
- * link rate at which communications to the remote device occur.
- * @remote_device: This parameter specifies the device for which to get the
- * connection rate.
- *
- * Return the link rate at which we transfer for the supplied remote device.
- */
-enum sas_linkrate scic_remote_device_get_connection_rate(
- struct scic_sds_remote_device *remote_device);
-
-/**
- * scic_remote_device_get_protocols() - This method will indicate which
- * protocols are supported by this remote device.
- * @remote_device: This parameter specifies the device for which to return the
- * protocol.
- * @protocols: This parameter specifies the output values, from the remote
- * device object, which indicate the protocols supported by the supplied
- * remote_device.
- *
- * The type of protocols supported by this device. The values are returned as
- * part of a bit mask in order to allow for multi-protocol support.
- */
-void scic_remote_device_get_protocols(
- struct scic_sds_remote_device *remote_device,
- struct smp_discover_response_protocols *protocols);
-
-
-#if !defined(DISABLE_ATAPI)
-/**
- * scic_remote_device_is_atapi() -
- * @this_device: The device whose type is to be decided.
- *
- * This method first decide whether a device is a stp target, then decode the
- * signature fis of a DA STP device to tell whether it is a standard end disk
- * or an ATAPI device. bool Indicate a device is ATAPI device or not.
- */
-bool scic_remote_device_is_atapi(
- struct scic_sds_remote_device *device_handle);
-#else /* !defined(DISABLE_ATAPI) */
-#define scic_remote_device_is_atapi(device_handle) false
-#endif /* !defined(DISABLE_ATAPI) */
-
-
-#endif /* _SCIC_REMOTE_DEVICE_H_ */
-
diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c
index 63f4cd1..c684d9e 100644
--- a/drivers/scsi/isci/core/scic_sds_controller.c
+++ b/drivers/scsi/isci/core/scic_sds_controller.c
@@ -57,13 +57,12 @@
#include "scic_controller.h"
#include "scic_phy.h"
#include "scic_port.h"
-#include "scic_remote_device.h"
#include "scic_sds_controller.h"
#include "scu_registers.h"
#include "scic_sds_phy.h"
#include "scic_sds_port_configuration_agent.h"
#include "scic_sds_port.h"
-#include "scic_sds_remote_device.h"
+#include "remote_device.h"
#include "scic_sds_request.h"
#include "sci_environment.h"
#include "sci_util.h"
diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h
index 4bb9a43..e15c4e2 100644
--- a/drivers/scsi/isci/core/scic_sds_controller.h
+++ b/drivers/scsi/isci/core/scic_sds_controller.h
@@ -73,7 +73,7 @@
#include "scic_config_parameters.h"
#include "scic_sds_port.h"
#include "scic_sds_phy.h"
-#include "scic_sds_remote_node_table.h"
+#include "remote_node_table.h"
#include "scu_registers.h"
#include "scu_constants.h"
#include "scu_remote_node_context.h"
diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c
index 34bd3b2..0901846 100644
--- a/drivers/scsi/isci/core/scic_sds_phy.c
+++ b/drivers/scsi/isci/core/scic_sds_phy.c
@@ -61,7 +61,7 @@
#include "scic_sds_controller.h"
#include "scic_sds_phy.h"
#include "scic_sds_port.h"
-#include "scic_sds_remote_node_context.h"
+#include "remote_node_context.h"
#include "sci_environment.h"
#include "sci_util.h"
#include "scu_event_codes.h"
diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c
index a8d7e51..b07e48e 100644
--- a/drivers/scsi/isci/core/scic_sds_port.c
+++ b/drivers/scsi/isci/core/scic_sds_port.c
@@ -60,8 +60,8 @@
#include "scic_sds_controller.h"
#include "scic_sds_phy.h"
#include "scic_sds_port.h"
-#include "scic_sds_remote_device.h"
-#include "scic_sds_remote_node_context.h"
+#include "remote_device.h"
+#include "remote_node_context.h"
#include "scic_sds_request.h"
#include "sci_environment.h"
#include "scu_registers.h"
diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c
deleted file mode 100644
index d314e2b..0000000
--- a/drivers/scsi/isci/core/scic_sds_remote_device.c
+++ /dev/null
@@ -1,1664 +0,0 @@
-/*
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "intel_sas.h"
-#include "scic_controller.h"
-#include "scic_phy.h"
-#include "scic_port.h"
-#include "scic_remote_device.h"
-#include "scic_sds_controller.h"
-#include "scic_sds_phy.h"
-#include "scic_sds_port.h"
-#include "scic_sds_remote_device.h"
-#include "scic_sds_remote_node_context.h"
-#include "scic_sds_request.h"
-#include "sci_environment.h"
-#include "sci_util.h"
-#include "scu_event_codes.h"
-
-
-#define SCIC_SDS_REMOTE_DEVICE_RESET_TIMEOUT (1000)
-
-enum sci_status scic_remote_device_da_construct(
- struct scic_sds_remote_device *sci_dev)
-{
- enum sci_status status;
- u16 remote_node_index;
- struct sci_sas_identify_address_frame_protocols protocols;
-
- /*
- * This information is request to determine how many remote node context
- * entries will be needed to store the remote node.
- */
- scic_sds_port_get_attached_protocols(sci_dev->owning_port, &protocols);
- sci_dev->target_protocols.u.all = protocols.u.all;
- sci_dev->is_direct_attached = true;
-#if !defined(DISABLE_ATAPI)
- sci_dev->is_atapi = scic_sds_remote_device_is_atapi(sci_dev);
-#endif
-
- status = scic_sds_controller_allocate_remote_node_context(
- sci_dev->owning_port->owning_controller,
- sci_dev,
- &remote_node_index);
-
- if (status == SCI_SUCCESS) {
- sci_dev->rnc.remote_node_index = remote_node_index;
-
- scic_sds_port_get_attached_sas_address(
- sci_dev->owning_port, &sci_dev->device_address);
-
- if (sci_dev->target_protocols.u.bits.attached_ssp_target) {
- sci_dev->has_ready_substate_machine = false;
- } else if (sci_dev->target_protocols.u.bits.attached_stp_target) {
- sci_dev->has_ready_substate_machine = true;
-
- sci_base_state_machine_construct(
- &sci_dev->ready_substate_machine,
- &sci_dev->parent,
- scic_sds_stp_remote_device_ready_substate_table,
- SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
- } else if (sci_dev->target_protocols.u.bits.attached_smp_target) {
- sci_dev->has_ready_substate_machine = true;
-
- /* add the SMP ready substate machine construction here */
- sci_base_state_machine_construct(
- &sci_dev->ready_substate_machine,
- &sci_dev->parent,
- scic_sds_smp_remote_device_ready_substate_table,
- SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
- }
-
- sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed(
- sci_dev->owning_port);
-
- /* / @todo Should I assign the port width by reading all of the phys on the port? */
- sci_dev->device_port_width = 1;
- }
-
- return status;
-}
-
-
-static void scic_sds_remote_device_get_info_from_smp_discover_response(
- struct scic_sds_remote_device *sci_dev,
- struct smp_response_discover *discover_response)
-{
- /* decode discover_response to set sas_address to sci_dev. */
- sci_dev->device_address.high =
- discover_response->attached_sas_address.high;
-
- sci_dev->device_address.low =
- discover_response->attached_sas_address.low;
-
- sci_dev->target_protocols.u.all = discover_response->protocols.u.all;
-}
-
-
-enum sci_status scic_remote_device_ea_construct(
- struct scic_sds_remote_device *sci_dev,
- struct smp_response_discover *discover_response)
-{
- enum sci_status status;
- struct scic_sds_controller *scic;
-
- scic = scic_sds_port_get_controller(sci_dev->owning_port);
-
- scic_sds_remote_device_get_info_from_smp_discover_response(
- sci_dev, discover_response);
-
- status = scic_sds_controller_allocate_remote_node_context(
- scic, sci_dev, &sci_dev->rnc.remote_node_index);
-
- if (status == SCI_SUCCESS) {
- if (sci_dev->target_protocols.u.bits.attached_ssp_target) {
- sci_dev->has_ready_substate_machine = false;
- } else if (sci_dev->target_protocols.u.bits.attached_smp_target) {
- sci_dev->has_ready_substate_machine = true;
-
- /* add the SMP ready substate machine construction here */
- sci_base_state_machine_construct(
- &sci_dev->ready_substate_machine,
- &sci_dev->parent,
- scic_sds_smp_remote_device_ready_substate_table,
- SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
- } else if (sci_dev->target_protocols.u.bits.attached_stp_target) {
- sci_dev->has_ready_substate_machine = true;
-
- sci_base_state_machine_construct(
- &sci_dev->ready_substate_machine,
- &sci_dev->parent,
- scic_sds_stp_remote_device_ready_substate_table,
- SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
- }
-
- /*
- * For SAS-2 the physical link rate is actually a logical link
- * rate that incorporates multiplexing. The SCU doesn't
- * incorporate multiplexing and for the purposes of the
- * connection the logical link rate is that same as the
- * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay
- * one another, so this code works for both situations. */
- sci_dev->connection_rate = min_t(u16,
- scic_sds_port_get_max_allowed_speed(sci_dev->owning_port),
- discover_response->u2.sas1_1.negotiated_physical_link_rate
- );
-
- /* / @todo Should I assign the port width by reading all of the phys on the port? */
- sci_dev->device_port_width = 1;
- }
-
- return status;
-}
-
-enum sci_status scic_remote_device_destruct(
- struct scic_sds_remote_device *sci_dev)
-{
- return sci_dev->state_handlers->destruct_handler(sci_dev);
-}
-
-
-enum sci_status scic_remote_device_start(
- struct scic_sds_remote_device *sci_dev,
- u32 timeout)
-{
- return sci_dev->state_handlers->start_handler(sci_dev);
-}
-
-
-enum sci_status scic_remote_device_stop(
- struct scic_sds_remote_device *sci_dev,
- u32 timeout)
-{
- return sci_dev->state_handlers->stop_handler(sci_dev);
-}
-
-
-enum sci_status scic_remote_device_reset(
- struct scic_sds_remote_device *sci_dev)
-{
- return sci_dev->state_handlers->reset_handler(sci_dev);
-}
-
-
-enum sci_status scic_remote_device_reset_complete(
- struct scic_sds_remote_device *sci_dev)
-{
- return sci_dev->state_handlers->reset_complete_handler(sci_dev);
-}
-
-
-enum sas_linkrate scic_remote_device_get_connection_rate(
- struct scic_sds_remote_device *sci_dev)
-{
- return sci_dev->connection_rate;
-}
-
-
-void scic_remote_device_get_protocols(
- struct scic_sds_remote_device *sci_dev,
- struct smp_discover_response_protocols *pr)
-{
- pr->u.all = sci_dev->target_protocols.u.all;
-}
-
-#if !defined(DISABLE_ATAPI)
-bool scic_remote_device_is_atapi(struct scic_sds_remote_device *sci_dev)
-{
- return sci_dev->is_atapi;
-}
-#endif
-
-
-/*
- * *****************************************************************************
- * * SCU DRIVER STANDARD (SDS) REMOTE DEVICE IMPLEMENTATIONS
- * ***************************************************************************** */
-
-/**
- *
- *
- * Remote device timer requirements
- */
-#define SCIC_SDS_REMOTE_DEVICE_MINIMUM_TIMER_COUNT (0)
-#define SCIC_SDS_REMOTE_DEVICE_MAXIMUM_TIMER_COUNT (SCI_MAX_REMOTE_DEVICES)
-
-
-/**
- *
- * @sci_dev: The remote device for which the suspend is being requested.
- *
- * This method invokes the remote device suspend state handler. enum sci_status
- */
-enum sci_status scic_sds_remote_device_suspend(
- struct scic_sds_remote_device *sci_dev,
- u32 suspend_type)
-{
- return sci_dev->state_handlers->suspend_handler(sci_dev, suspend_type);
-}
-
-/**
- *
- * @sci_dev: The remote device for which the resume is being requested.
- *
- * This method invokes the remote device resume state handler. enum sci_status
- */
-enum sci_status scic_sds_remote_device_resume(
- struct scic_sds_remote_device *sci_dev)
-{
- return sci_dev->state_handlers->resume_handler(sci_dev);
-}
-
-/**
- *
- * @sci_dev: The remote device for which the event handling is being
- * requested.
- * @frame_index: This is the frame index that is being processed.
- *
- * This method invokes the frame handler for the remote device state machine
- * enum sci_status
- */
-enum sci_status scic_sds_remote_device_frame_handler(
- struct scic_sds_remote_device *sci_dev,
- u32 frame_index)
-{
- return sci_dev->state_handlers->frame_handler(sci_dev, frame_index);
-}
-
-/**
- *
- * @sci_dev: The remote device for which the event handling is being
- * requested.
- * @event_code: This is the event code that is to be processed.
- *
- * This method invokes the remote device event handler. enum sci_status
- */
-enum sci_status scic_sds_remote_device_event_handler(
- struct scic_sds_remote_device *sci_dev,
- u32 event_code)
-{
- return sci_dev->state_handlers->event_handler(sci_dev, event_code);
-}
-
-/**
- *
- * @controller: The controller that is starting the io request.
- * @sci_dev: The remote device for which the start io handling is being
- * requested.
- * @io_request: The io request that is being started.
- *
- * This method invokes the remote device start io handler. enum sci_status
- */
-enum sci_status scic_sds_remote_device_start_io(
- struct scic_sds_controller *controller,
- struct scic_sds_remote_device *sci_dev,
- struct scic_sds_request *io_request)
-{
- return sci_dev->state_handlers->start_io_handler(
- sci_dev, io_request);
-}
-
-/**
- *
- * @controller: The controller that is completing the io request.
- * @sci_dev: The remote device for which the complete io handling is being
- * requested.
- * @io_request: The io request that is being completed.
- *
- * This method invokes the remote device complete io handler. enum sci_status
- */
-enum sci_status scic_sds_remote_device_complete_io(
- struct scic_sds_controller *controller,
- struct scic_sds_remote_device *sci_dev,
- struct scic_sds_request *io_request)
-{
- return sci_dev->state_handlers->complete_io_handler(
- sci_dev, io_request);
-}
-
-/**
- *
- * @controller: The controller that is starting the task request.
- * @sci_dev: The remote device for which the start task handling is being
- * requested.
- * @io_request: The task request that is being started.
- *
- * This method invokes the remote device start task handler. enum sci_status
- */
-enum sci_status scic_sds_remote_device_start_task(
- struct scic_sds_controller *controller,
- struct scic_sds_remote_device *sci_dev,
- struct scic_sds_request *io_request)
-{
- return sci_dev->state_handlers->start_task_handler(
- sci_dev, io_request);
-}
-
-/**
- *
- * @controller: The controller that is completing the task request.
- * @sci_dev: The remote device for which the complete task handling is
- * being requested.
- * @io_request: The task request that is being completed.
- *
- * This method invokes the remote device complete task handler. enum sci_status
- */
-
-/**
- *
- * @sci_dev:
- * @request:
- *
- * This method takes the request and bulids an appropriate SCU context for the
- * request and then requests the controller to post the request. none
- */
-void scic_sds_remote_device_post_request(
- struct scic_sds_remote_device *sci_dev,
- u32 request)
-{
- u32 context;
-
- context = scic_sds_remote_device_build_command_context(sci_dev, request);
-
- scic_sds_controller_post_request(
- scic_sds_remote_device_get_controller(sci_dev),
- context
- );
-}
-
-#if !defined(DISABLE_ATAPI)
-/**
- *
- * @sci_dev: The device to be checked.
- *
- * This method check the signature fis of a stp device to decide whether a
- * device is atapi or not. true if a device is atapi device. False if a device
- * is not atapi.
- */
-bool scic_sds_remote_device_is_atapi(
- struct scic_sds_remote_device *sci_dev)
-{
- if (!sci_dev->target_protocols.u.bits.attached_stp_target)
- return false;
- else if (sci_dev->is_direct_attached) {
- struct scic_sds_phy *phy;
- struct scic_sata_phy_properties properties;
- struct sata_fis_reg_d2h *signature_fis;
- phy = scic_sds_port_get_a_connected_phy(sci_dev->owning_port);
- scic_sata_phy_get_properties(phy, &properties);
-
- /* decode the signature fis. */
- signature_fis = &(properties.signature_fis);
-
- if ((signature_fis->sector_count == 0x01)
- && (signature_fis->lba_low == 0x01)
- && (signature_fis->lba_mid == 0x14)
- && (signature_fis->lba_high == 0xEB)
- && ((signature_fis->device & 0x5F) == 0x00)
- ) {
- /* An ATA device supporting the PACKET command set. */
- return true;
- } else
- return false;
- } else {
- /* Expander supported ATAPI device is not currently supported. */
- return false;
- }
-}
-#endif
-
-/**
- *
- * @user_parameter: This is cast to a remote device object.
- *
- * This method is called once the remote node context is ready to be freed.
- * The remote device can now report that its stop operation is complete. none
- */
-static void scic_sds_cb_remote_device_rnc_destruct_complete(
- void *user_parameter)
-{
- struct scic_sds_remote_device *sci_dev;
-
- sci_dev = (struct scic_sds_remote_device *)user_parameter;
-
- BUG_ON(sci_dev->started_request_count != 0);
-
- sci_base_state_machine_change_state(&sci_dev->state_machine,
- SCI_BASE_REMOTE_DEVICE_STATE_STOPPED);
-}
-
-/**
- *
- * @user_parameter: This is cast to a remote device object.
- *
- * This method is called once the remote node context has transisitioned to a
- * ready state. This is the indication that the remote device object can also
- * transition to ready. none
- */
-static void scic_sds_remote_device_resume_complete_handler(
- void *user_parameter)
-{
- struct scic_sds_remote_device *sci_dev;
-
- sci_dev = (struct scic_sds_remote_device *)user_parameter;
-
- if (
- sci_base_state_machine_get_state(&sci_dev->state_machine)
- != SCI_BASE_REMOTE_DEVICE_STATE_READY
- ) {
- sci_base_state_machine_change_state(
- &sci_dev->state_machine,
- SCI_BASE_REMOTE_DEVICE_STATE_READY
- );
- }
-}
-
-/**
- *
- * @device: This parameter specifies the device for which the request is being
- * started.
- * @request: This parameter specifies the request being started.
- * @status: This parameter specifies the current start operation status.
- *
- * This method will perform the STP request start processing common to IO
- * requests and task requests of all types. none
- */
-void scic_sds_remote_device_start_request(
- struct scic_sds_remote_device *sci_dev,
- struct scic_sds_request *sci_req,
- enum sci_status status)
-{
- /* We still have a fault in starting the io complete it on the port */
- if (status == SCI_SUCCESS)
- scic_sds_remote_device_increment_request_count(sci_dev);
- else{
- sci_dev->owning_port->state_handlers->complete_io_handler(
- sci_dev->owning_port, sci_dev, sci_req
- );
- }
-}
-
-
-/**
- *
- * @request: This parameter specifies the request being continued.
- *
- * This method will continue to post tc for a STP request. This method usually
- * serves as a callback when RNC gets resumed during a task management
- * sequence. none
- */
-void scic_sds_remote_device_continue_request(void *dev)
-{
- struct scic_sds_remote_device *sci_dev = dev;
-
- /* we need to check if this request is still valid to continue. */
- if (sci_dev->working_request)
- scic_controller_continue_io(sci_dev->working_request);
-}
-
-/**
- *
- * @user_parameter: This is cast to a remote device object.
- *
- * This method is called once the remote node context has reached a suspended
- * state. The remote device can now report that its suspend operation is
- * complete. none
- */
-
-/**
- * This method will terminate all of the IO requests in the controllers IO
- * request table that were targeted for this device.
- * @sci_dev: This parameter specifies the remote device for which to
- * attempt to terminate all requests.
- *
- * This method returns an indication as to whether all requests were
- * successfully terminated. If a single request fails to be terminated, then
- * this method will return the failure.
- */
-static enum sci_status scic_sds_remote_device_terminate_requests(
- struct scic_sds_remote_device *sci_dev)
-{
- enum sci_status status = SCI_SUCCESS;
- enum sci_status terminate_status = SCI_SUCCESS;
- struct scic_sds_request *sci_req;
- u32 index;
- u32 request_count = sci_dev->started_request_count;
-
- for (index = 0;
- (index < SCI_MAX_IO_REQUESTS) && (request_count > 0);
- index++) {
- sci_req = sci_dev->owning_port->owning_controller->io_request_table[index];
-
- if ((sci_req != NULL) && (sci_req->target_device == sci_dev)) {
- terminate_status = scic_controller_terminate_request(
- sci_dev->owning_port->owning_controller,
- sci_dev,
- sci_req
- );
-
- if (terminate_status != SCI_SUCCESS)
- status = terminate_status;
-
- request_count--;
- }
- }
-
- return status;
-}
-
-static enum sci_status
-default_device_handler(struct scic_sds_remote_device *sci_dev,
- const char *func)
-{
- dev_warn(scirdev_to_dev(sci_dev),
- "%s: in wrong state: %d\n", func,
- sci_base_state_machine_get_state(&sci_dev->state_machine));
- return SCI_FAILURE_INVALID_STATE;
-}
-
-enum sci_status scic_sds_remote_device_default_start_handler(
- struct scic_sds_remote_device *sci_dev)
-{
- return default_device_handler(sci_dev, __func__);
-}
-
-static enum sci_status scic_sds_remote_device_default_stop_handler(
- struct scic_sds_remote_device *sci_dev)
-{
- return default_device_handler(sci_dev, __func__);
-}
-
-enum sci_status scic_sds_remote_device_default_fail_handler(
- struct scic_sds_remote_device *sci_dev)
-{
- return default_device_handler(sci_dev, __func__);
-}
-
-enum sci_status scic_sds_remote_device_default_destruct_handler(
- struct scic_sds_remote_device *sci_dev)
-{
- return default_device_handler(sci_dev, __func__);
-}
-
-enum sci_status scic_sds_remote_device_default_reset_handler(
- struct scic_sds_remote_device *sci_dev)
-{
- return default_device_handler(sci_dev, __func__);
-}
-
-enum sci_status scic_sds_remote_device_default_reset_complete_handler(
- struct scic_sds_remote_device *sci_dev)
-{
- return default_device_handler(sci_dev, __func__);
-}
-
-enum sci_status scic_sds_remote_device_default_suspend_handler(
- struct scic_sds_remote_device *sci_dev, u32 suspend_type)
-{
- return default_device_handler(sci_dev, __func__);
-}
-
-enum sci_status scic_sds_remote_device_default_resume_handler(
- struct scic_sds_remote_device *sci_dev)
-{
- return default_device_handler(sci_dev, __func__);
-}
-
-/**
- *
- * @device: The struct scic_sds_remote_device which is then cast into a
- * struct scic_sds_remote_device.
- * @event_code: The event code that the struct scic_sds_controller wants the device
- * object to process.
- *
- * This method is the default event handler. It will call the RNC state
- * machine handler for any RNC events otherwise it will log a warning and
- * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE
- */
-static enum sci_status scic_sds_remote_device_core_event_handler(
- struct scic_sds_remote_device *sci_dev,
- u32 event_code,
- bool is_ready_state)
-{
- enum sci_status status;
-
- switch (scu_get_event_type(event_code)) {
- case SCU_EVENT_TYPE_RNC_OPS_MISC:
- case SCU_EVENT_TYPE_RNC_SUSPEND_TX:
- case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX:
- status = scic_sds_remote_node_context_event_handler(&sci_dev->rnc, event_code);
- break;
- case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT:
-
- if (scu_get_event_code(event_code) == SCU_EVENT_IT_NEXUS_TIMEOUT) {
- status = SCI_SUCCESS;
-
- /* Suspend the associated RNC */
- scic_sds_remote_node_context_suspend(&sci_dev->rnc,
- SCI_SOFTWARE_SUSPENSION,
- NULL, NULL);
-
- dev_dbg(scirdev_to_dev(sci_dev),
- "%s: device: %p event code: %x: %s\n",
- __func__, sci_dev, event_code,
- (is_ready_state)
- ? "I_T_Nexus_Timeout event"
- : "I_T_Nexus_Timeout event in wrong state");
-
- break;
- }
- /* Else, fall through and treat as unhandled... */
-
- default:
- dev_dbg(scirdev_to_dev(sci_dev),
- "%s: device: %p event code: %x: %s\n",
- __func__, sci_dev, event_code,
- (is_ready_state)
- ? "unexpected event"
- : "unexpected event in wrong state");
- status = SCI_FAILURE_INVALID_STATE;
- break;
- }
-
- return status;
-}
-/**
- *
- * @device: The struct scic_sds_remote_device which is then cast into a
- * struct scic_sds_remote_device.
- * @event_code: The event code that the struct scic_sds_controller wants the device
- * object to process.
- *
- * This method is the default event handler. It will call the RNC state
- * machine handler for any RNC events otherwise it will log a warning and
- * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE
- */
-static enum sci_status scic_sds_remote_device_default_event_handler(
- struct scic_sds_remote_device *sci_dev,
- u32 event_code)
-{
- return scic_sds_remote_device_core_event_handler(sci_dev,
- event_code,
- false);
-}
-
-/**
- *
- * @device: The struct scic_sds_remote_device which is then cast into a
- * struct scic_sds_remote_device.
- * @frame_index: The frame index for which the struct scic_sds_controller wants this
- * device object to process.
- *
- * This method is the default unsolicited frame handler. It logs a warning,
- * releases the frame and returns a failure. enum sci_status
- * SCI_FAILURE_INVALID_STATE
- */
-enum sci_status scic_sds_remote_device_default_frame_handler(
- struct scic_sds_remote_device *sci_dev,
- u32 frame_index)
-{
- dev_warn(scirdev_to_dev(sci_dev),
- "%s: SCIC Remote Device requested to handle frame %x "
- "while in wrong state %d\n",
- __func__,
- frame_index,
- sci_base_state_machine_get_state(
- &sci_dev->state_machine));
-
- /* Return the frame back to the controller */
- scic_sds_controller_release_frame(
- scic_sds_remote_device_get_controller(sci_dev), frame_index
- );
-
- return SCI_FAILURE_INVALID_STATE;
-}
-
-enum sci_status scic_sds_remote_device_default_start_request_handler(
- struct scic_sds_remote_device *sci_dev,
- struct scic_sds_request *request)
-{
- return default_device_handler(sci_dev, __func__);
-}
-
-enum sci_status scic_sds_remote_device_default_complete_request_handler(
- struct scic_sds_remote_device *sci_dev,
- struct scic_sds_request *request)
-{
- return default_device_handler(sci_dev, __func__);
-}
-
-enum sci_status scic_sds_remote_device_default_continue_request_handler(
- struct scic_sds_remote_device *sci_dev,
- struct scic_sds_request *request)
-{
- return default_device_handler(sci_dev, __func__);
-}
-
-/**
- *
- * @device: The struct scic_sds_remote_device which is then cast into a
- * struct scic_sds_remote_device.
- * @frame_index: The frame index for which the struct scic_sds_controller wants this
- * device object to process.
- *
- * This method is a general ssp frame handler. In most cases the device object
- * needs to route the unsolicited frame processing to the io request object.
- * This method decodes the tag for the io request object and routes the
- * unsolicited frame to that object. enum sci_status SCI_FAILURE_INVALID_STATE
- */
-enum sci_status scic_sds_remote_device_general_frame_handler(
- struct scic_sds_remote_device *sci_dev,
- u32 frame_index)
-{
- enum sci_status result;
- struct sci_ssp_frame_header *frame_header;
- struct scic_sds_request *io_request;
-
- result = scic_sds_unsolicited_frame_control_get_header(
- &(scic_sds_remote_device_get_controller(sci_dev)->uf_control),
- frame_index,
- (void **)&frame_header
- );
-
- if (SCI_SUCCESS == result) {
- io_request = scic_sds_controller_get_io_request_from_tag(
- scic_sds_remote_device_get_controller(sci_dev), frame_header->tag);
-
- if ((io_request == NULL)
- || (io_request->target_device != sci_dev)) {
- /*
- * We could not map this tag to a valid IO request
- * Just toss the frame and continue */
- scic_sds_controller_release_frame(
- scic_sds_remote_device_get_controller(sci_dev), frame_index
- );
- } else {
- /* The IO request is now in charge of releasing the frame */
- result = io_request->state_handlers->frame_handler(
- io_request, frame_index);
- }
- }
-
- return result;
-}
-
-/**
- *
- * @[in]: sci_dev This is the device object that is receiving the event.
- * @[in]: event_code The event code to process.
- *
- * This is a common method for handling events reported to the remote device
- * from the controller object. enum sci_status
- */
-enum sci_status scic_sds_remote_device_general_event_handler(
- struct scic_sds_remote_device *sci_dev,
- u32 event_code)
-{
- return scic_sds_remote_device_core_event_handler(sci_dev,
- event_code,
- true);
-}
-
-/*
- * *****************************************************************************
- * * STOPPED STATE HANDLERS
- * ***************************************************************************** */
-
-/**
- *
- * @device:
- *
- * This method takes the struct scic_sds_remote_device from a stopped state and
- * attempts to start it. The RNC buffer for the device is constructed and the
- * device state machine is transitioned to the
- * SCIC_BASE_REMOTE_DEVICE_STATE_STARTING. enum sci_status SCI_SUCCESS if there is
- * an RNC buffer available to construct the remote device.
- * SCI_FAILURE_INSUFFICIENT_RESOURCES if there is no RNC buffer available in
- * which to construct the remote device.
- */
-static enum sci_status scic_sds_remote_device_stopped_state_start_handler(
- struct scic_sds_remote_device *sci_dev)
-{
- enum sci_status status;
-
- status = scic_sds_remote_node_context_resume(&sci_dev->rnc,
- scic_sds_remote_device_resume_complete_handler, sci_dev);
-
- if (status == SCI_SUCCESS)
- sci_base_state_machine_change_state(&sci_dev->state_machine,
- SCI_BASE_REMOTE_DEVICE_STATE_STARTING);
-
- return status;
-}
-
-static enum sci_status scic_sds_remote_device_stopped_state_stop_handler(
- struct scic_sds_remote_device *sci_dev)
-{
- return SCI_SUCCESS;
-}
-
-/**
- *
- * @sci_dev: The struct scic_sds_remote_device which is cast into a
- * struct scic_sds_remote_device.
- *
- * This method will destruct a struct scic_sds_remote_device that is in a stopped
- * state. This is the only state from which a destruct request will succeed.
- * The RNi for this struct scic_sds_remote_device is returned to the free pool and the
- * device object transitions to the SCI_BASE_REMOTE_DEVICE_STATE_FINAL.
- * enum sci_status SCI_SUCCESS
- */
-static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler(
- struct scic_sds_remote_device *sci_dev)
-{
- struct scic_sds_controller *scic;
-
- scic = scic_sds_remote_device_get_controller(sci_dev);
- scic_sds_controller_free_remote_node_context(scic, sci_dev,
- sci_dev->rnc.remote_node_index);
- sci_dev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX;
-
- sci_base_state_machine_change_state(&sci_dev->state_machine,
- SCI_BASE_REMOTE_DEVICE_STATE_FINAL);
-
- return SCI_SUCCESS;
-}
-
-/*
- * *****************************************************************************
- * * STARTING STATE HANDLERS
- * ***************************************************************************** */
-
-static enum sci_status scic_sds_remote_device_starting_state_stop_handler(
- struct scic_sds_remote_device *sci_dev)
-{
- /*
- * This device has not yet started so there had better be no IO requests
- */
- BUG_ON(sci_dev->started_request_count != 0);
-
- /*
- * Destroy the remote node context
- */
- scic_sds_remote_node_context_destruct(&sci_dev->rnc,
- scic_sds_cb_remote_device_rnc_destruct_complete, sci_dev);
-
- /*
- * Transition to the stopping state and wait for the remote node to
- * complete being posted and invalidated.
- */
- sci_base_state_machine_change_state(&sci_dev->state_machine,
- SCI_BASE_REMOTE_DEVICE_STATE_STOPPING);
-
- return SCI_SUCCESS;
-}
-
-enum sci_status scic_sds_remote_device_ready_state_stop_handler(
- struct scic_sds_remote_device *sci_dev)
-{
- enum sci_status status = SCI_SUCCESS;
-
- /* Request the parent state machine to transition to the stopping state */
- sci_base_state_machine_change_state(&sci_dev->state_machine,
- SCI_BASE_REMOTE_DEVICE_STATE_STOPPING);
-
- if (sci_dev->started_request_count == 0) {
- scic_sds_remote_node_context_destruct(&sci_dev->rnc,
- scic_sds_cb_remote_device_rnc_destruct_complete,
- sci_dev);
- } else
- status = scic_sds_remote_device_terminate_requests(sci_dev);
-
- return status;
-}
-
-/**
- *
- * @device: The struct scic_sds_remote_device object which is cast to a
- * struct scic_sds_remote_device object.
- *
- * This is the ready state device reset handler enum sci_status
- */
-enum sci_status scic_sds_remote_device_ready_state_reset_handler(
- struct scic_sds_remote_device *sci_dev)
-{
- /* Request the parent state machine to transition to the stopping state */
- sci_base_state_machine_change_state(&sci_dev->state_machine,
- SCI_BASE_REMOTE_DEVICE_STATE_RESETTING);
-
- return SCI_SUCCESS;
-}
-
-/*
- * This method will attempt to start a task request for this device object. The
- * remote device object will issue the start request for the task and if
- * successful it will start the request for the port object then increment its
- * own requet count. enum sci_status SCI_SUCCESS if the task request is started for
- * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request
- * object could not get the resources to start.
- */
-static enum sci_status scic_sds_remote_device_ready_state_start_task_handler(
- struct scic_sds_remote_device *sci_dev,
- struct scic_sds_request *request)
-{
- enum sci_status result;
-
- /* See if the port is in a state where we can start the IO request */
- result = scic_sds_port_start_io(
- scic_sds_remote_device_get_port(sci_dev), sci_dev, request);
-
- if (result == SCI_SUCCESS) {
- result = scic_sds_remote_node_context_start_task(&sci_dev->rnc,
- request);
- if (result == SCI_SUCCESS)
- result = scic_sds_request_start(request);
-
- scic_sds_remote_device_start_request(sci_dev, request, result);
- }
-
- return result;
-}
-
-/*
- * This method will attempt to start an io request for this device object. The
- * remote device object will issue the start request for the io and if
- * successful it will start the request for the port object then increment its
- * own requet count. enum sci_status SCI_SUCCESS if the io request is started for
- * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request
- * object could not get the resources to start.
- */
-static enum sci_status scic_sds_remote_device_ready_state_start_io_handler(
- struct scic_sds_remote_device *sci_dev,
- struct scic_sds_request *request)
-{
- enum sci_status result;
-
- /* See if the port is in a state where we can start the IO request */
- result = scic_sds_port_start_io(
- scic_sds_remote_device_get_port(sci_dev), sci_dev, request);
-
- if (result == SCI_SUCCESS) {
- result = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request);
- if (result == SCI_SUCCESS)
- result = scic_sds_request_start(request);
-
- scic_sds_remote_device_start_request(sci_dev, request, result);
- }
-
- return result;
-}
-
-/*
- * This method will complete the request for the remote device object. The
- * method will call the completion handler for the request object and if
- * successful it will complete the request on the port object then decrement
- * its own started_request_count. enum sci_status
- */
-static enum sci_status scic_sds_remote_device_ready_state_complete_request_handler(
- struct scic_sds_remote_device *sci_dev,
- struct scic_sds_request *request)
-{
- enum sci_status result;
-
- result = scic_sds_request_complete(request);
-
- if (result != SCI_SUCCESS)
- return result;
-
- /* See if the port is in a state
- * where we can start the IO request */
- result = scic_sds_port_complete_io(
- scic_sds_remote_device_get_port(sci_dev),
- sci_dev, request);
-
- if (result == SCI_SUCCESS)
- scic_sds_remote_device_decrement_request_count(sci_dev);
-
- return result;
-}
-
-/*
- * *****************************************************************************
- * * STOPPING STATE HANDLERS
- * ***************************************************************************** */
-
-/**
- *
- * @sci_dev: The struct scic_sds_remote_device which is cast into a
- * struct scic_sds_remote_device.
- *
- * This method will stop a struct scic_sds_remote_device that is already in the
- * SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This is not considered an error
- * since we allow a stop request on a device that is alreay stopping or
- * stopped. enum sci_status SCI_SUCCESS
- */
-static enum sci_status scic_sds_remote_device_stopping_state_stop_handler(
- struct scic_sds_remote_device *device)
-{
- /*
- * All requests should have been terminated, but if there is an
- * attempt to stop a device already in the stopping state, then
- * try again to terminate. */
- return scic_sds_remote_device_terminate_requests(device);
-}
-
-
-/**
- *
- * @device: The device object for which the request is completing.
- * @request: The task request that is being completed.
- *
- * This method completes requests for this struct scic_sds_remote_device while it is
- * in the SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This method calls the
- * complete method for the request object and if that is successful the port
- * object is called to complete the task request. Then the device object itself
- * completes the task request. If struct scic_sds_remote_device started_request_count
- * goes to 0 and the invalidate RNC request has completed the device object can
- * transition to the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED. enum sci_status
- */
-static enum sci_status scic_sds_remote_device_stopping_state_complete_request_handler(
- struct scic_sds_remote_device *sci_dev,
- struct scic_sds_request *request)
-{
- enum sci_status status = SCI_SUCCESS;
-
- status = scic_sds_request_complete(request);
-
- if (status != SCI_SUCCESS)
- return status;
-
- status = scic_sds_port_complete_io(scic_sds_remote_device_get_port(sci_dev),
- sci_dev, request);
- if (status != SCI_SUCCESS)
- return status;
-
- scic_sds_remote_device_decrement_request_count(sci_dev);
-
- if (scic_sds_remote_device_get_request_count(sci_dev) == 0)
- scic_sds_remote_node_context_destruct(&sci_dev->rnc,
- scic_sds_cb_remote_device_rnc_destruct_complete,
- sci_dev);
- return SCI_SUCCESS;
-}
-
-/**
- *
- * @device: The struct scic_sds_remote_device which is to be cast into a
- * struct scic_sds_remote_device object.
- *
- * This method will complete the reset operation when the device is in the
- * resetting state. enum sci_status
- */
-static enum sci_status scic_sds_remote_device_resetting_state_reset_complete_handler(
- struct scic_sds_remote_device *sci_dev)
-{
-
- sci_base_state_machine_change_state(
- &sci_dev->state_machine,
- SCI_BASE_REMOTE_DEVICE_STATE_READY
- );
-
- return SCI_SUCCESS;
-}
-
-/**
- *
- * @device: The struct scic_sds_remote_device which is to be cast into a
- * struct scic_sds_remote_device object.
- *
- * This method will stop the remote device while in the resetting state.
- * enum sci_status
- */
-static enum sci_status scic_sds_remote_device_resetting_state_stop_handler(
- struct scic_sds_remote_device *sci_dev)
-{
- sci_base_state_machine_change_state(
- &sci_dev->state_machine,
- SCI_BASE_REMOTE_DEVICE_STATE_STOPPING
- );
-
- return SCI_SUCCESS;
-}
-
-/*
- * This method completes requests for this struct scic_sds_remote_device while it is
- * in the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the
- * complete method for the request object and if that is successful the port
- * object is called to complete the task request. Then the device object itself
- * completes the task request. enum sci_status
- */
-static enum sci_status scic_sds_remote_device_resetting_state_complete_request_handler(
- struct scic_sds_remote_device *sci_dev,
- struct scic_sds_request *request)
-{
- enum sci_status status = SCI_SUCCESS;
-
- status = scic_sds_request_complete(request);
-
- if (status == SCI_SUCCESS) {
- status = scic_sds_port_complete_io(
- scic_sds_remote_device_get_port(sci_dev),
- sci_dev, request);
-
- if (status == SCI_SUCCESS) {
- scic_sds_remote_device_decrement_request_count(sci_dev);
- }
- }
-
- return status;
-}
-
-/*
- * *****************************************************************************
- * * FAILED STATE HANDLERS
- * ***************************************************************************** */
-
-/**
- *
- * @device: The struct scic_sds_remote_device which is to be cast into a
- * struct scic_sds_remote_device object.
- *
- * This method handles the remove request for a failed struct scic_sds_remote_device
- * object. The method will transition the device object to the
- * SCIC_BASE_REMOTE_DEVICE_STATE_STOPPING. enum sci_status SCI_SUCCESS
- */
-
-/* --------------------------------------------------------------------------- */
-
-static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = {
- [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = {
- .start_handler = scic_sds_remote_device_default_start_handler,
- .stop_handler = scic_sds_remote_device_default_stop_handler,
- .fail_handler = scic_sds_remote_device_default_fail_handler,
- .destruct_handler = scic_sds_remote_device_default_destruct_handler,
- .reset_handler = scic_sds_remote_device_default_reset_handler,
- .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
- .start_io_handler = scic_sds_remote_device_default_start_request_handler,
- .complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
- .continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
- .start_task_handler = scic_sds_remote_device_default_start_request_handler,
- .complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
- .suspend_handler = scic_sds_remote_device_default_suspend_handler,
- .resume_handler = scic_sds_remote_device_default_resume_handler,
- .event_handler = scic_sds_remote_device_default_event_handler,
- .frame_handler = scic_sds_remote_device_default_frame_handler
- },
- [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = {
- .start_handler = scic_sds_remote_device_stopped_state_start_handler,
- .stop_handler = scic_sds_remote_device_stopped_state_stop_handler,
- .fail_handler = scic_sds_remote_device_default_fail_handler,
- .destruct_handler = scic_sds_remote_device_stopped_state_destruct_handler,
- .reset_handler = scic_sds_remote_device_default_reset_handler,
- .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
- .start_io_handler = scic_sds_remote_device_default_start_request_handler,
- .complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
- .continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
- .start_task_handler = scic_sds_remote_device_default_start_request_handler,
- .complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
- .suspend_handler = scic_sds_remote_device_default_suspend_handler,
- .resume_handler = scic_sds_remote_device_default_resume_handler,
- .event_handler = scic_sds_remote_device_default_event_handler,
- .frame_handler = scic_sds_remote_device_default_frame_handler
- },
- [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = {
- .start_handler = scic_sds_remote_device_default_start_handler,
- .stop_handler = scic_sds_remote_device_starting_state_stop_handler,
- .fail_handler = scic_sds_remote_device_default_fail_handler,
- .destruct_handler = scic_sds_remote_device_default_destruct_handler,
- .reset_handler = scic_sds_remote_device_default_reset_handler,
- .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
- .start_io_handler = scic_sds_remote_device_default_start_request_handler,
- .complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
- .continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
- .start_task_handler = scic_sds_remote_device_default_start_request_handler,
- .complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
- .suspend_handler = scic_sds_remote_device_default_suspend_handler,
- .resume_handler = scic_sds_remote_device_default_resume_handler,
- .event_handler = scic_sds_remote_device_general_event_handler,
- .frame_handler = scic_sds_remote_device_default_frame_handler
- },
- [SCI_BASE_REMOTE_DEVICE_STATE_READY] = {
- .start_handler = scic_sds_remote_device_default_start_handler,
- .stop_handler = scic_sds_remote_device_ready_state_stop_handler,
- .fail_handler = scic_sds_remote_device_default_fail_handler,
- .destruct_handler = scic_sds_remote_device_default_destruct_handler,
- .reset_handler = scic_sds_remote_device_ready_state_reset_handler,
- .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
- .start_io_handler = scic_sds_remote_device_ready_state_start_io_handler,
- .complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler,
- .continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
- .start_task_handler = scic_sds_remote_device_ready_state_start_task_handler,
- .complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler,
- .suspend_handler = scic_sds_remote_device_default_suspend_handler,
- .resume_handler = scic_sds_remote_device_default_resume_handler,
- .event_handler = scic_sds_remote_device_general_event_handler,
- .frame_handler = scic_sds_remote_device_general_frame_handler,
- },
- [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = {
- .start_handler = scic_sds_remote_device_default_start_handler,
- .stop_handler = scic_sds_remote_device_stopping_state_stop_handler,
- .fail_handler = scic_sds_remote_device_default_fail_handler,
- .destruct_handler = scic_sds_remote_device_default_destruct_handler,
- .reset_handler = scic_sds_remote_device_default_reset_handler,
- .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
- .start_io_handler = scic_sds_remote_device_default_start_request_handler,
- .complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler,
- .continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
- .start_task_handler = scic_sds_remote_device_default_start_request_handler,
- .complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler,
- .suspend_handler = scic_sds_remote_device_default_suspend_handler,
- .resume_handler = scic_sds_remote_device_default_resume_handler,
- .event_handler = scic_sds_remote_device_general_event_handler,
- .frame_handler = scic_sds_remote_device_general_frame_handler
- },
- [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = {
- .start_handler = scic_sds_remote_device_default_start_handler,
- .stop_handler = scic_sds_remote_device_default_stop_handler,
- .fail_handler = scic_sds_remote_device_default_fail_handler,
- .destruct_handler = scic_sds_remote_device_default_destruct_handler,
- .reset_handler = scic_sds_remote_device_default_reset_handler,
- .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
- .start_io_handler = scic_sds_remote_device_default_start_request_handler,
- .complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
- .continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
- .start_task_handler = scic_sds_remote_device_default_start_request_handler,
- .complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
- .suspend_handler = scic_sds_remote_device_default_suspend_handler,
- .resume_handler = scic_sds_remote_device_default_resume_handler,
- .event_handler = scic_sds_remote_device_default_event_handler,
- .frame_handler = scic_sds_remote_device_general_frame_handler
- },
- [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = {
- .start_handler = scic_sds_remote_device_default_start_handler,
- .stop_handler = scic_sds_remote_device_resetting_state_stop_handler,
- .fail_handler = scic_sds_remote_device_default_fail_handler,
- .destruct_handler = scic_sds_remote_device_default_destruct_handler,
- .reset_handler = scic_sds_remote_device_default_reset_handler,
- .reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler,
- .start_io_handler = scic_sds_remote_device_default_start_request_handler,
- .complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler,
- .continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
- .start_task_handler = scic_sds_remote_device_default_start_request_handler,
- .complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler,
- .suspend_handler = scic_sds_remote_device_default_suspend_handler,
- .resume_handler = scic_sds_remote_device_default_resume_handler,
- .event_handler = scic_sds_remote_device_default_event_handler,
- .frame_handler = scic_sds_remote_device_general_frame_handler
- },
- [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = {
- .start_handler = scic_sds_remote_device_default_start_handler,
- .stop_handler = scic_sds_remote_device_default_stop_handler,
- .fail_handler = scic_sds_remote_device_default_fail_handler,
- .destruct_handler = scic_sds_remote_device_default_destruct_handler,
- .reset_handler = scic_sds_remote_device_default_reset_handler,
- .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
- .start_io_handler = scic_sds_remote_device_default_start_request_handler,
- .complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
- .continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
- .start_task_handler = scic_sds_remote_device_default_start_request_handler,
- .complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
- .suspend_handler = scic_sds_remote_device_default_suspend_handler,
- .resume_handler = scic_sds_remote_device_default_resume_handler,
- .event_handler = scic_sds_remote_device_default_event_handler,
- .frame_handler = scic_sds_remote_device_default_frame_handler
- }
-};
-
-/**
- *
- * @object: This is the struct sci_base_object that is cast into a
- * struct scic_sds_remote_device.
- *
- * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_INITIAL it
- * immediatly transitions the remote device object to the stopped state. none
- */
-static void scic_sds_remote_device_initial_state_enter(
- struct sci_base_object *object)
-{
- struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object;
-
- sci_dev = container_of(object, typeof(*sci_dev), parent);
- SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
- SCI_BASE_REMOTE_DEVICE_STATE_INITIAL);
-
- /* Initial state is a transitional state to the stopped state */
- sci_base_state_machine_change_state(&sci_dev->state_machine,
- SCI_BASE_REMOTE_DEVICE_STATE_STOPPED);
-}
-
-/**
- *
- * @object: This is the struct sci_base_object that is cast into a
- * struct scic_sds_remote_device.
- *
- * This is the enter function for the SCI_BASE_REMOTE_DEVICE_STATE_INITIAL it
- * sets the stopped state handlers and if this state is entered from the
- * SCI_BASE_REMOTE_DEVICE_STATE_STOPPING then the SCI User is informed that the
- * device stop is complete. none
- */
-static void scic_sds_remote_device_stopped_state_enter(
- struct sci_base_object *object)
-{
- struct scic_sds_remote_device *sci_dev;
- struct scic_sds_controller *scic;
- struct isci_remote_device *idev;
- struct isci_host *ihost;
- u32 prev_state;
-
- sci_dev = container_of(object, typeof(*sci_dev), parent);
- scic = scic_sds_remote_device_get_controller(sci_dev);
- ihost = sci_object_get_association(scic);
- idev = sci_object_get_association(sci_dev);
-
- SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
- SCI_BASE_REMOTE_DEVICE_STATE_STOPPED);
-
- /* If we are entering from the stopping state let the SCI User know that
- * the stop operation has completed.
- */
- prev_state = sci_dev->state_machine.previous_state_id;
- if (prev_state == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING)
- isci_remote_device_stop_complete(ihost, idev, SCI_SUCCESS);
-
- scic_sds_controller_remote_device_stopped(scic, sci_dev);
-}
-
-/**
- *
- * @object: This is the struct sci_base_object that is cast into a
- * struct scic_sds_remote_device.
- *
- * This is the enter function for the SCI_BASE_REMOTE_DEVICE_STATE_STARTING it
- * sets the starting state handlers, sets the device not ready, and posts the
- * remote node context to the hardware. none
- */
-static void scic_sds_remote_device_starting_state_enter(struct sci_base_object *object)
-{
- struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev),
- parent);
- struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
- struct isci_host *ihost = sci_object_get_association(scic);
- struct isci_remote_device *idev = sci_object_get_association(sci_dev);
-
- SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
- SCI_BASE_REMOTE_DEVICE_STATE_STARTING);
-
- isci_remote_device_not_ready(ihost, idev,
- SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED);
-}
-
-static void scic_sds_remote_device_starting_state_exit(struct sci_base_object *object)
-{
- struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev),
- parent);
- struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
- struct isci_host *ihost = sci_object_get_association(scic);
- struct isci_remote_device *idev = sci_object_get_association(sci_dev);
-
- /*
- * @todo Check the device object for the proper return code for this
- * callback
- */
- isci_remote_device_start_complete(ihost, idev, SCI_SUCCESS);
-}
-
-/**
- *
- * @object: This is the struct sci_base_object that is cast into a
- * struct scic_sds_remote_device.
- *
- * This is the enter function for the SCI_BASE_REMOTE_DEVICE_STATE_READY it sets
- * the ready state handlers, and starts the ready substate machine. none
- */
-static void scic_sds_remote_device_ready_state_enter(struct sci_base_object *object)
-{
- struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev),
- parent);
- struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
- struct isci_host *ihost = sci_object_get_association(scic);
- struct isci_remote_device *idev = sci_object_get_association(sci_dev);
-
- SET_STATE_HANDLER(sci_dev,
- scic_sds_remote_device_state_handler_table,
- SCI_BASE_REMOTE_DEVICE_STATE_READY);
-
- scic->remote_device_sequence[sci_dev->rnc.remote_node_index]++;
-
- if (sci_dev->has_ready_substate_machine)
- sci_base_state_machine_start(&sci_dev->ready_substate_machine);
- else
- isci_remote_device_ready(ihost, idev);
-}
-
-/**
- *
- * @object: This is the struct sci_base_object that is cast into a
- * struct scic_sds_remote_device.
- *
- * This is the exit function for the SCI_BASE_REMOTE_DEVICE_STATE_READY it does
- * nothing. none
- */
-static void scic_sds_remote_device_ready_state_exit(
- struct sci_base_object *object)
-{
- struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev),
- parent);
- if (sci_dev->has_ready_substate_machine)
- sci_base_state_machine_stop(&sci_dev->ready_substate_machine);
- else {
- struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
- struct isci_host *ihost = sci_object_get_association(scic);
- struct isci_remote_device *idev = sci_object_get_association(sci_dev);
-
- isci_remote_device_not_ready(ihost, idev,
- SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED);
- }
-}
-
-/**
- *
- * @object: This is the struct sci_base_object that is cast into a
- * struct scic_sds_remote_device.
- *
- * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_STOPPING it
- * sets the stopping state handlers and posts an RNC invalidate request to the
- * SCU hardware. none
- */
-static void scic_sds_remote_device_stopping_state_enter(
- struct sci_base_object *object)
-{
- struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object;
-
- SET_STATE_HANDLER(
- sci_dev,
- scic_sds_remote_device_state_handler_table,
- SCI_BASE_REMOTE_DEVICE_STATE_STOPPING
- );
-}
-
-/**
- *
- * @object: This is the struct sci_base_object that is cast into a
- * struct scic_sds_remote_device.
- *
- * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_FAILED it sets
- * the stopping state handlers. none
- */
-static void scic_sds_remote_device_failed_state_enter(
- struct sci_base_object *object)
-{
- struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object;
-
- SET_STATE_HANDLER(
- sci_dev,
- scic_sds_remote_device_state_handler_table,
- SCI_BASE_REMOTE_DEVICE_STATE_FAILED
- );
-}
-
-/**
- *
- * @object: This is the struct sci_base_object that is cast into a
- * struct scic_sds_remote_device.
- *
- * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING it
- * sets the resetting state handlers. none
- */
-static void scic_sds_remote_device_resetting_state_enter(
- struct sci_base_object *object)
-{
- struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object;
-
- SET_STATE_HANDLER(
- sci_dev,
- scic_sds_remote_device_state_handler_table,
- SCI_BASE_REMOTE_DEVICE_STATE_RESETTING
- );
-
- scic_sds_remote_node_context_suspend(
- &sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL);
-}
-
-/**
- *
- * @object: This is the struct sci_base_object that is cast into a
- * struct scic_sds_remote_device.
- *
- * This is the exit method for the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING it
- * does nothing. none
- */
-static void scic_sds_remote_device_resetting_state_exit(
- struct sci_base_object *object)
-{
- struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object;
-
- scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL);
-}
-
-/**
- *
- * @object: This is the struct sci_base_object that is cast into a
- * struct scic_sds_remote_device.
- *
- * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_FINAL it sets
- * the final state handlers. none
- */
-static void scic_sds_remote_device_final_state_enter(
- struct sci_base_object *object)
-{
- struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object;
-
- SET_STATE_HANDLER(
- sci_dev,
- scic_sds_remote_device_state_handler_table,
- SCI_BASE_REMOTE_DEVICE_STATE_FINAL
- );
-}
-
-/* --------------------------------------------------------------------------- */
-
-static const struct sci_base_state scic_sds_remote_device_state_table[] = {
- [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = {
- .enter_state = scic_sds_remote_device_initial_state_enter,
- },
- [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = {
- .enter_state = scic_sds_remote_device_stopped_state_enter,
- },
- [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = {
- .enter_state = scic_sds_remote_device_starting_state_enter,
- .exit_state = scic_sds_remote_device_starting_state_exit
- },
- [SCI_BASE_REMOTE_DEVICE_STATE_READY] = {
- .enter_state = scic_sds_remote_device_ready_state_enter,
- .exit_state = scic_sds_remote_device_ready_state_exit
- },
- [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = {
- .enter_state = scic_sds_remote_device_stopping_state_enter,
- },
- [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = {
- .enter_state = scic_sds_remote_device_failed_state_enter,
- },
- [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = {
- .enter_state = scic_sds_remote_device_resetting_state_enter,
- .exit_state = scic_sds_remote_device_resetting_state_exit
- },
- [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = {
- .enter_state = scic_sds_remote_device_final_state_enter,
- },
-};
-
-void scic_remote_device_construct(struct scic_sds_port *sci_port,
- struct scic_sds_remote_device *sci_dev)
-{
- sci_dev->owning_port = sci_port;
- sci_dev->started_request_count = 0;
- sci_dev->parent.private = NULL;
-
- sci_base_state_machine_construct(
- &sci_dev->state_machine,
- &sci_dev->parent,
- scic_sds_remote_device_state_table,
- SCI_BASE_REMOTE_DEVICE_STATE_INITIAL
- );
-
- sci_base_state_machine_start(
- &sci_dev->state_machine
- );
-
- scic_sds_remote_node_context_construct(&sci_dev->rnc,
- SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX);
-
- sci_object_set_association(&sci_dev->rnc, sci_dev);
-}
diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.h b/drivers/scsi/isci/core/scic_sds_remote_device.h
deleted file mode 100644
index bff44b8..0000000
--- a/drivers/scsi/isci/core/scic_sds_remote_device.h
+++ /dev/null
@@ -1,694 +0,0 @@
-/*
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _SCIC_SDS_REMOTE_DEVICE_H_
-#define _SCIC_SDS_REMOTE_DEVICE_H_
-
-#include "intel_sas.h"
-#include "scu_remote_node_context.h"
-#include "scic_sds_remote_node_context.h"
-#include <scsi/libsas.h>
-
-/**
- * enum scic_sds_remote_device_states - This enumeration depicts all the states
- * for the common remote device state machine.
- *
- *
- */
-enum scic_sds_remote_device_states {
- /**
- * Simply the initial state for the base remote device state machine.
- */
- SCI_BASE_REMOTE_DEVICE_STATE_INITIAL,
-
- /**
- * This state indicates that the remote device has successfully been
- * stopped. In this state no new IO operations are permitted.
- * This state is entered from the INITIAL state.
- * This state is entered from the STOPPING state.
- */
- SCI_BASE_REMOTE_DEVICE_STATE_STOPPED,
-
- /**
- * This state indicates the the remote device is in the process of
- * becoming ready (i.e. starting). In this state no new IO operations
- * are permitted.
- * This state is entered from the STOPPED state.
- */
- SCI_BASE_REMOTE_DEVICE_STATE_STARTING,
-
- /**
- * This state indicates the remote device is now ready. Thus, the user
- * is able to perform IO operations on the remote device.
- * This state is entered from the STARTING state.
- */
- SCI_BASE_REMOTE_DEVICE_STATE_READY,
-
- /**
- * This state indicates that the remote device is in the process of
- * stopping. In this state no new IO operations are permitted, but
- * existing IO operations are allowed to complete.
- * This state is entered from the READY state.
- * This state is entered from the FAILED state.
- */
- SCI_BASE_REMOTE_DEVICE_STATE_STOPPING,
-
- /**
- * This state indicates that the remote device has failed.
- * In this state no new IO operations are permitted.
- * This state is entered from the INITIALIZING state.
- * This state is entered from the READY state.
- */
- SCI_BASE_REMOTE_DEVICE_STATE_FAILED,
-
- /**
- * This state indicates the device is being reset.
- * In this state no new IO operations are permitted.
- * This state is entered from the READY state.
- */
- SCI_BASE_REMOTE_DEVICE_STATE_RESETTING,
-
- /**
- * Simply the final state for the base remote device state machine.
- */
- SCI_BASE_REMOTE_DEVICE_STATE_FINAL,
-};
-
-/**
- * enum scic_sds_ssp_remote_device_ready_substates -
- *
- * This is the enumeration of the ready substates for the
- * struct scic_sds_remote_device.
- */
-enum scic_sds_ssp_remote_device_ready_substates {
- /**
- * This is the initial state for the remote device ready substate.
- */
- SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_INITIAL,
-
- /**
- * This is the ready operational substate for the remote device.
- * This is the normal operational state for a remote device.
- */
- SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_OPERATIONAL,
-
- /**
- * This is the suspended state for the remote device. This is the state
- * that the device is placed in when a RNC suspend is received by
- * the SCU hardware.
- */
- SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_SUSPENDED,
-
- /**
- * This is the final state that the device is placed in before a change
- * to the base state machine.
- */
- SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_FINAL,
-
- SCIC_SDS_SSP_REMOTE_DEVICE_READY_MAX_SUBSTATES
-};
-
-/**
- * enum scic_sds_stp_remote_device_ready_substates -
- *
- * This is the enumeration for the struct scic_sds_remote_device ready substates
- * for the STP remote device.
- */
-enum scic_sds_stp_remote_device_ready_substates {
- /**
- * This is the idle substate for the stp remote device. When there are no
- * active IO for the device it is is in this state.
- */
- SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE,
-
- /**
- * This is the command state for for the STP remote device. This state is
- * entered when the device is processing a non-NCQ command. The device object
- * will fail any new start IO requests until this command is complete.
- */
- SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD,
-
- /**
- * This is the NCQ state for the STP remote device. This state is entered
- * when the device is processing an NCQ reuqest. It will remain in this state
- * so long as there is one or more NCQ requests being processed.
- */
- SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ,
-
- /**
- * This is the NCQ error state for the STP remote device. This state is
- * entered when an SDB error FIS is received by the device object while in the
- * NCQ state. The device object will only accept a READ LOG command while in
- * this state.
- */
- SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR,
-
-#if !defined(DISABLE_ATAPI)
- /**
- * This is the ATAPI error state for the STP ATAPI remote device. This state is
- * entered when ATAPI device sends error status FIS without data while the device
- * object is in CMD state. A suspension event is expected in this state. The device
- * object will resume right away.
- */
- SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR,
-#endif
-
- /**
- * This is the READY substate indicates the device is waiting for the RESET task
- * coming to be recovered from certain hardware specific error.
- */
- SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET,
-};
-
-/**
- * enum scic_sds_smp_remote_device_ready_substates -
- *
- * This is the enumeration of the ready substates for the SMP REMOTE DEVICE.
- */
-enum scic_sds_smp_remote_device_ready_substates {
- /**
- * This is the ready operational substate for the remote device. This is the
- * normal operational state for a remote device.
- */
- SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE,
-
- /**
- * This is the suspended state for the remote device. This is the state that
- * the device is placed in when a RNC suspend is received by the SCU hardware.
- */
- SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD,
-};
-
-/**
- * struct scic_sds_remote_device - This structure contains the data for an SCU
- * implementation of the SCU Core device data.
- *
- *
- */
-struct scic_sds_remote_device {
- /**
- * The field specifies that the parent object for the base remote
- * device is the base object itself.
- */
- struct sci_base_object parent;
-
- /**
- * This field contains the information for the base remote device state
- * machine.
- */
- struct sci_base_state_machine state_machine;
-
- /**
- * This field is the programmed device port width. This value is
- * written to the RCN data structure to tell the SCU how many open
- * connections this device can have.
- */
- u32 device_port_width;
-
- /**
- * This field is the programmed connection rate for this remote device. It is
- * used to program the TC with the maximum allowed connection rate.
- */
- enum sas_linkrate connection_rate;
-
- /**
- * This field contains the allowed target protocols for this remote device.
- */
- struct smp_discover_response_protocols target_protocols;
-
- /**
- * This field contains the device SAS address.
- */
- struct sci_sas_address device_address;
-
- /**
- * This filed is assinged the value of true if the device is directly
- * attached to the port.
- */
- bool is_direct_attached;
-
-#if !defined(DISABLE_ATAPI)
- /**
- * This filed is assinged the value of true if the device is an ATAPI
- * device.
- */
- bool is_atapi;
-#endif
-
- /**
- * This filed contains a pointer back to the port to which this device
- * is assigned.
- */
- struct scic_sds_port *owning_port;
-
- /**
- * This field contains the SCU silicon remote node context specific
- * information.
- */
- struct scic_sds_remote_node_context rnc;
-
- /**
- * This field contains the stated request count for the remote device. The
- * device can not reach the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED until all
- * requests are complete and the rnc_posted value is false.
- */
- u32 started_request_count;
-
- /**
- * This field contains a pointer to the working request object. It is only
- * used only for SATA requests since the unsolicited frames we get from the
- * hardware have no Tag value to look up the io request object.
- */
- struct scic_sds_request *working_request;
-
- /**
- * This field contains the reason for the remote device going not_ready. It is
- * assigned in the state handlers and used in the state transition.
- */
- u32 not_ready_reason;
-
- /**
- * This field is true if this remote device has an initialzied ready substate
- * machine. SSP devices do not have a ready substate machine and STP devices
- * have a ready substate machine.
- */
- bool has_ready_substate_machine;
-
- /**
- * This field contains the state machine for the ready substate machine for
- * this struct scic_sds_remote_device object.
- */
- struct sci_base_state_machine ready_substate_machine;
-
- /**
- * This field maintains the set of state handlers for the remote device
- * object. These are changed each time the remote device enters a new state.
- */
- const struct scic_sds_remote_device_state_handler *state_handlers;
-};
-
-static inline struct scic_sds_remote_device *rnc_to_dev(struct scic_sds_remote_node_context *rnc)
-{
- struct scic_sds_remote_device *sci_dev;
-
- sci_dev = container_of(rnc, typeof(*sci_dev), rnc);
-
- return sci_dev;
-}
-
-typedef enum sci_status (*scic_sds_remote_device_request_handler_t)(
- struct scic_sds_remote_device *device,
- struct scic_sds_request *request);
-
-typedef enum sci_status (*scic_sds_remote_device_high_priority_request_complete_handler_t)(
- struct scic_sds_remote_device *device,
- struct scic_sds_request *request,
- void *,
- enum sci_io_status);
-
-typedef enum sci_status (*scic_sds_remote_device_handler_t)(
- struct scic_sds_remote_device *sci_dev);
-
-typedef enum sci_status (*scic_sds_remote_device_suspend_handler_t)(
- struct scic_sds_remote_device *sci_dev,
- u32 suspend_type);
-
-typedef enum sci_status (*scic_sds_remote_device_resume_handler_t)(
- struct scic_sds_remote_device *sci_dev);
-
-typedef enum sci_status (*scic_sds_remote_device_frame_handler_t)(
- struct scic_sds_remote_device *sci_dev,
- u32 frame_index);
-
-typedef enum sci_status (*scic_sds_remote_device_event_handler_t)(
- struct scic_sds_remote_device *sci_dev,
- u32 event_code);
-
-typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)(
- struct scic_sds_remote_device *sci_dev);
-
-/**
- * struct scic_sds_remote_device_state_handler - This structure conains the
- * state handlers that are needed to process requests for the SCU remote
- * device objects.
- *
- *
- */
-struct scic_sds_remote_device_state_handler {
- /**
- * The start_handler specifies the method invoked when a user
- * attempts to start a remote device.
- */
- scic_sds_remote_device_handler_t start_handler;
-
- /**
- * The stop_handler specifies the method invoked when a user attempts to
- * stop a remote device.
- */
- scic_sds_remote_device_handler_t stop_handler;
-
- /**
- * The fail_handler specifies the method invoked when a remote device
- * failure has occurred. A failure may be due to an inability to
- * initialize/configure the device.
- */
- scic_sds_remote_device_handler_t fail_handler;
-
- /**
- * The destruct_handler specifies the method invoked when attempting to
- * destruct a remote device.
- */
- scic_sds_remote_device_handler_t destruct_handler;
-
- /**
- * The reset handler specifies the method invloked when requesting to
- * reset a remote device.
- */
- scic_sds_remote_device_handler_t reset_handler;
-
- /**
- * The reset complete handler specifies the method invloked when
- * reporting that a reset has completed to the remote device.
- */
- scic_sds_remote_device_handler_t reset_complete_handler;
-
- /**
- * The start_io_handler specifies the method invoked when a user
- * attempts to start an IO request for a remote device.
- */
- scic_sds_remote_device_request_handler_t start_io_handler;
-
- /**
- * The complete_io_handler specifies the method invoked when a user
- * attempts to complete an IO request for a remote device.
- */
- scic_sds_remote_device_request_handler_t complete_io_handler;
-
- /**
- * The continue_io_handler specifies the method invoked when a user
- * attempts to continue an IO request for a remote device.
- */
- scic_sds_remote_device_request_handler_t continue_io_handler;
-
- /**
- * The start_task_handler specifies the method invoked when a user
- * attempts to start a task management request for a remote device.
- */
- scic_sds_remote_device_request_handler_t start_task_handler;
-
- /**
- * The complete_task_handler specifies the method invoked when a user
- * attempts to complete a task management request for a remote device.
- */
- scic_sds_remote_device_request_handler_t complete_task_handler;
-
-
- scic_sds_remote_device_suspend_handler_t suspend_handler;
- scic_sds_remote_device_resume_handler_t resume_handler;
- scic_sds_remote_device_event_handler_t event_handler;
- scic_sds_remote_device_frame_handler_t frame_handler;
-};
-
-extern const struct sci_base_state scic_sds_ssp_remote_device_ready_substate_table[];
-extern const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[];
-extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[];
-
-/**
- * scic_sds_remote_device_increment_request_count() -
- *
- * This macro incrments the request count for this device
- */
-#define scic_sds_remote_device_increment_request_count(sci_dev) \
- ((sci_dev)->started_request_count++)
-
-/**
- * scic_sds_remote_device_decrement_request_count() -
- *
- * This macro decrements the request count for this device. This count will
- * never decrment past 0.
- */
-#define scic_sds_remote_device_decrement_request_count(sci_dev) \
- ((sci_dev)->started_request_count > 0 ? \
- (sci_dev)->started_request_count-- : 0)
-
-/**
- * scic_sds_remote_device_get_request_count() -
- *
- * This is a helper macro to return the current device request count.
- */
-#define scic_sds_remote_device_get_request_count(sci_dev) \
- ((sci_dev)->started_request_count)
-
-/**
- * scic_sds_remote_device_get_port() -
- *
- * This macro returns the owning port of this remote device obejct.
- */
-#define scic_sds_remote_device_get_port(sci_dev) \
- ((sci_dev)->owning_port)
-
-/**
- * scic_sds_remote_device_get_controller() -
- *
- * This macro returns the controller object that contains this device object
- */
-#define scic_sds_remote_device_get_controller(sci_dev) \
- scic_sds_port_get_controller(scic_sds_remote_device_get_port(sci_dev))
-
-/**
- * scic_sds_remote_device_set_state_handlers() -
- *
- * This macro sets the remote device state handlers pointer and is set on entry
- * to each device state.
- */
-#define scic_sds_remote_device_set_state_handlers(sci_dev, handlers) \
- ((sci_dev)->state_handlers = (handlers))
-
-/**
- * scic_sds_remote_device_get_port() -
- *
- * This macro returns the owning port of this device
- */
-#define scic_sds_remote_device_get_port(sci_dev) \
- ((sci_dev)->owning_port)
-
-/**
- * scic_sds_remote_device_get_sequence() -
- *
- * This macro returns the remote device sequence value
- */
-#define scic_sds_remote_device_get_sequence(sci_dev) \
- (\
- scic_sds_remote_device_get_controller(sci_dev)-> \
- remote_device_sequence[(sci_dev)->rnc.remote_node_index] \
- )
-
-/**
- * scic_sds_remote_device_get_controller_peg() -
- *
- * This macro returns the controllers protocol engine group
- */
-#define scic_sds_remote_device_get_controller_peg(sci_dev) \
- (\
- scic_sds_controller_get_protocol_engine_group(\
- scic_sds_port_get_controller(\
- scic_sds_remote_device_get_port(sci_dev) \
- ) \
- ) \
- )
-
-/**
- * scic_sds_remote_device_get_port_index() -
- *
- * This macro returns the port index for the devices owning port
- */
-#define scic_sds_remote_device_get_port_index(sci_dev) \
- (scic_sds_port_get_index(scic_sds_remote_device_get_port(sci_dev)))
-
-/**
- * scic_sds_remote_device_get_index() -
- *
- * This macro returns the remote node index for this device object
- */
-#define scic_sds_remote_device_get_index(sci_dev) \
- ((sci_dev)->rnc.remote_node_index)
-
-/**
- * scic_sds_remote_device_build_command_context() -
- *
- * This macro builds a remote device context for the SCU post request operation
- */
-#define scic_sds_remote_device_build_command_context(device, command) \
- ((command) \
- | (scic_sds_remote_device_get_controller_peg((device)) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) \
- | (scic_sds_remote_device_get_port_index((device)) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) \
- | (scic_sds_remote_device_get_index((device))) \
- )
-
-/**
- * scic_sds_remote_device_set_working_request() -
- *
- * This macro makes the working request assingment for the remote device
- * object. To clear the working request use this macro with a NULL request
- * object.
- */
-#define scic_sds_remote_device_set_working_request(device, request) \
- ((device)->working_request = (request))
-
-enum sci_status scic_sds_remote_device_frame_handler(
- struct scic_sds_remote_device *sci_dev,
- u32 frame_index);
-
-enum sci_status scic_sds_remote_device_event_handler(
- struct scic_sds_remote_device *sci_dev,
- u32 event_code);
-
-enum sci_status scic_sds_remote_device_start_io(
- struct scic_sds_controller *controller,
- struct scic_sds_remote_device *sci_dev,
- struct scic_sds_request *io_request);
-
-enum sci_status scic_sds_remote_device_complete_io(
- struct scic_sds_controller *controller,
- struct scic_sds_remote_device *sci_dev,
- struct scic_sds_request *io_request);
-
-enum sci_status scic_sds_remote_device_resume(
- struct scic_sds_remote_device *sci_dev);
-
-enum sci_status scic_sds_remote_device_suspend(
- struct scic_sds_remote_device *sci_dev,
- u32 suspend_type);
-
-enum sci_status scic_sds_remote_device_start_task(
- struct scic_sds_controller *controller,
- struct scic_sds_remote_device *sci_dev,
- struct scic_sds_request *io_request);
-
-void scic_sds_remote_device_post_request(
- struct scic_sds_remote_device *sci_dev,
- u32 request);
-
-#if !defined(DISABLE_ATAPI)
-bool scic_sds_remote_device_is_atapi(
- struct scic_sds_remote_device *sci_dev);
-#else /* !defined(DISABLE_ATAPI) */
-#define scic_sds_remote_device_is_atapi(sci_dev) false
-#endif /* !defined(DISABLE_ATAPI) */
-
-void scic_sds_remote_device_start_request(
- struct scic_sds_remote_device *sci_dev,
- struct scic_sds_request *sci_req,
- enum sci_status status);
-
-void scic_sds_remote_device_continue_request(void *sci_dev);
-
-enum sci_status scic_sds_remote_device_default_start_handler(
- struct scic_sds_remote_device *sci_dev);
-
-enum sci_status scic_sds_remote_device_default_fail_handler(
- struct scic_sds_remote_device *sci_dev);
-
-enum sci_status scic_sds_remote_device_default_destruct_handler(
- struct scic_sds_remote_device *sci_dev);
-
-enum sci_status scic_sds_remote_device_default_reset_handler(
- struct scic_sds_remote_device *device);
-
-enum sci_status scic_sds_remote_device_default_reset_complete_handler(
- struct scic_sds_remote_device *device);
-
-enum sci_status scic_sds_remote_device_default_start_request_handler(
- struct scic_sds_remote_device *device,
- struct scic_sds_request *request);
-
-enum sci_status scic_sds_remote_device_default_complete_request_handler(
- struct scic_sds_remote_device *device,
- struct scic_sds_request *request);
-
-enum sci_status scic_sds_remote_device_default_continue_request_handler(
- struct scic_sds_remote_device *device,
- struct scic_sds_request *request);
-
-enum sci_status scic_sds_remote_device_default_suspend_handler(
- struct scic_sds_remote_device *sci_dev,
- u32 suspend_type);
-
-enum sci_status scic_sds_remote_device_default_resume_handler(
- struct scic_sds_remote_device *sci_dev);
-
-
-enum sci_status scic_sds_remote_device_default_frame_handler(
- struct scic_sds_remote_device *sci_dev,
- u32 frame_index);
-
-enum sci_status scic_sds_remote_device_ready_state_stop_handler(
- struct scic_sds_remote_device *device);
-
-enum sci_status scic_sds_remote_device_ready_state_reset_handler(
- struct scic_sds_remote_device *device);
-
-enum sci_status scic_sds_remote_device_general_frame_handler(
- struct scic_sds_remote_device *sci_dev,
- u32 frame_index);
-
-enum sci_status scic_sds_remote_device_general_event_handler(
- struct scic_sds_remote_device *sci_dev,
- u32 event_code);
-
-enum sci_status scic_sds_ssp_remote_device_ready_suspended_substate_resume_handler(
- struct scic_sds_remote_device *sci_dev);
-
-#endif /* _SCIC_SDS_REMOTE_DEVICE_H_ */
diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c
index 63ebbf3..dfb9412 100644
--- a/drivers/scsi/isci/core/scic_sds_request.c
+++ b/drivers/scsi/isci/core/scic_sds_request.c
@@ -59,11 +59,10 @@
#include "intel_sat.h"
#include "scic_controller.h"
#include "scic_io_request.h"
-#include "scic_remote_device.h"
#include "scic_sds_controller.h"
#include "scu_registers.h"
#include "scic_sds_port.h"
-#include "scic_sds_remote_device.h"
+#include "remote_device.h"
#include "scic_sds_request.h"
#include "scic_sds_smp_request.h"
#include "scic_sds_stp_request.h"
diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c
index 3274d62..1790f25 100644
--- a/drivers/scsi/isci/core/scic_sds_smp_request.c
+++ b/drivers/scsi/isci/core/scic_sds_smp_request.c
@@ -56,9 +56,8 @@
#include "intel_sas.h"
#include "sci_base_state_machine.h"
#include "scic_controller.h"
-#include "scic_remote_device.h"
#include "scic_sds_controller.h"
-#include "scic_sds_remote_device.h"
+#include "remote_device.h"
#include "scic_sds_request.h"
#include "scic_sds_smp_request.h"
#include "sci_environment.h"
diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c
index e4d2bf5..1cb77bb 100644
--- a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c
+++ b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c
@@ -61,9 +61,8 @@
#include "sati_translator_sequence.h"
#include "sci_base_state.h"
#include "scic_controller.h"
-#include "scic_remote_device.h"
#include "scic_sds_controller.h"
-#include "scic_sds_remote_device.h"
+#include "remote_device.h"
#include "scic_sds_request.h"
#include "scic_sds_stp_packet_request.h"
#include "scic_user_callback.h"
diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c
index ab01f8d..59c5f1b 100644
--- a/drivers/scsi/isci/core/scic_sds_stp_request.c
+++ b/drivers/scsi/isci/core/scic_sds_stp_request.c
@@ -60,9 +60,8 @@
#include "sci_base_state.h"
#include "sci_base_state_machine.h"
#include "scic_io_request.h"
-#include "scic_remote_device.h"
#include "scic_sds_controller.h"
-#include "scic_sds_remote_device.h"
+#include "remote_device.h"
#include "scic_sds_request.h"
#include "scic_sds_stp_pio_request.h"
#include "scic_sds_stp_request.h"
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 3aceb92..676bcdb 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -55,14 +55,12 @@
#include "isci.h"
#include "scic_io_request.h"
-#include "scic_remote_device.h"
#include "scic_port.h"
-
#include "port.h"
#include "request.h"
#include "host.h"
#include "probe_roms.h"
-#include "core/scic_sds_controller.h"
+#include "scic_sds_controller.h"
irqreturn_t isci_msix_isr(int vec, void *data)
{
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 21bd7d8..8dc8d1c 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -61,7 +61,6 @@
/*#include "task.h"*/
#include "timers.h"
#include "remote_device.h"
-#include "scic_remote_device.h"
#define DRV_NAME "isci"
#define SCI_PCI_BAR_COUNT 2
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index a23ea2c..f7ca9e8 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -62,7 +62,6 @@
#include "isci.h"
#include "task.h"
#include "sci_controller_constants.h"
-#include "scic_remote_device.h"
#include "sci_environment.h"
#include "probe_roms.h"
diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
index cf78cf0..430b29e 100644
--- a/drivers/scsi/isci/port.c
+++ b/drivers/scsi/isci/port.c
@@ -63,7 +63,6 @@
#include <linux/workqueue.h>
#include "isci.h"
#include "scic_io_request.h"
-#include "scic_remote_device.h"
#include "scic_phy.h"
#include "scic_sds_phy.h"
#include "scic_port.h"
diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h
index 76546fd..eeac7bb 100644
--- a/drivers/scsi/isci/port.h
+++ b/drivers/scsi/isci/port.h
@@ -64,6 +64,7 @@
struct isci_phy;
struct isci_host;
+struct scic_sds_phy;
enum isci_status {
diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c
index 2df8d8e..933d811 100644
--- a/drivers/scsi/isci/probe_roms.c
+++ b/drivers/scsi/isci/probe_roms.c
@@ -33,7 +33,6 @@
#include "isci.h"
#include "task.h"
#include "sci_controller_constants.h"
-#include "scic_remote_device.h"
#include "sci_environment.h"
#include "probe_roms.h"
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index 1553221..6b9ea90 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -52,19 +52,1170 @@
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-
+#include "intel_sas.h"
#include "isci.h"
-#include "scic_io_request.h"
-#include "scic_remote_device.h"
-#include "scic_phy.h"
-#include "scic_port.h"
#include "port.h"
#include "remote_device.h"
#include "request.h"
+#include "scic_controller.h"
+#include "scic_io_request.h"
+#include "scic_phy.h"
+#include "scic_port.h"
+#include "scic_sds_controller.h"
+#include "scic_sds_phy.h"
+#include "scic_sds_port.h"
+#include "remote_node_context.h"
+#include "scic_sds_request.h"
+#include "sci_environment.h"
+#include "sci_util.h"
+#include "scu_event_codes.h"
#include "task.h"
+enum sci_status scic_remote_device_stop(
+ struct scic_sds_remote_device *sci_dev,
+ u32 timeout)
+{
+ return sci_dev->state_handlers->stop_handler(sci_dev);
+}
+enum sci_status scic_remote_device_reset(
+ struct scic_sds_remote_device *sci_dev)
+{
+ return sci_dev->state_handlers->reset_handler(sci_dev);
+}
+
+
+enum sci_status scic_remote_device_reset_complete(
+ struct scic_sds_remote_device *sci_dev)
+{
+ return sci_dev->state_handlers->reset_complete_handler(sci_dev);
+}
+
+
+enum sas_linkrate scic_remote_device_get_connection_rate(
+ struct scic_sds_remote_device *sci_dev)
+{
+ return sci_dev->connection_rate;
+}
+
+
+void scic_remote_device_get_protocols(
+ struct scic_sds_remote_device *sci_dev,
+ struct smp_discover_response_protocols *pr)
+{
+ pr->u.all = sci_dev->target_protocols.u.all;
+}
+
+#if !defined(DISABLE_ATAPI)
+bool scic_remote_device_is_atapi(struct scic_sds_remote_device *sci_dev)
+{
+ return sci_dev->is_atapi;
+}
+#endif
+
+
+/**
+ *
+ *
+ * Remote device timer requirements
+ */
+#define SCIC_SDS_REMOTE_DEVICE_MINIMUM_TIMER_COUNT (0)
+#define SCIC_SDS_REMOTE_DEVICE_MAXIMUM_TIMER_COUNT (SCI_MAX_REMOTE_DEVICES)
+
+
+/**
+ *
+ * @sci_dev: The remote device for which the suspend is being requested.
+ *
+ * This method invokes the remote device suspend state handler. enum sci_status
+ */
+enum sci_status scic_sds_remote_device_suspend(
+ struct scic_sds_remote_device *sci_dev,
+ u32 suspend_type)
+{
+ return sci_dev->state_handlers->suspend_handler(sci_dev, suspend_type);
+}
+
+/**
+ *
+ * @sci_dev: The remote device for which the event handling is being
+ * requested.
+ * @frame_index: This is the frame index that is being processed.
+ *
+ * This method invokes the frame handler for the remote device state machine
+ * enum sci_status
+ */
+enum sci_status scic_sds_remote_device_frame_handler(
+ struct scic_sds_remote_device *sci_dev,
+ u32 frame_index)
+{
+ return sci_dev->state_handlers->frame_handler(sci_dev, frame_index);
+}
+
+/**
+ *
+ * @sci_dev: The remote device for which the event handling is being
+ * requested.
+ * @event_code: This is the event code that is to be processed.
+ *
+ * This method invokes the remote device event handler. enum sci_status
+ */
+enum sci_status scic_sds_remote_device_event_handler(
+ struct scic_sds_remote_device *sci_dev,
+ u32 event_code)
+{
+ return sci_dev->state_handlers->event_handler(sci_dev, event_code);
+}
+
+/**
+ *
+ * @controller: The controller that is starting the io request.
+ * @sci_dev: The remote device for which the start io handling is being
+ * requested.
+ * @io_request: The io request that is being started.
+ *
+ * This method invokes the remote device start io handler. enum sci_status
+ */
+enum sci_status scic_sds_remote_device_start_io(
+ struct scic_sds_controller *controller,
+ struct scic_sds_remote_device *sci_dev,
+ struct scic_sds_request *io_request)
+{
+ return sci_dev->state_handlers->start_io_handler(
+ sci_dev, io_request);
+}
+
+/**
+ *
+ * @controller: The controller that is completing the io request.
+ * @sci_dev: The remote device for which the complete io handling is being
+ * requested.
+ * @io_request: The io request that is being completed.
+ *
+ * This method invokes the remote device complete io handler. enum sci_status
+ */
+enum sci_status scic_sds_remote_device_complete_io(
+ struct scic_sds_controller *controller,
+ struct scic_sds_remote_device *sci_dev,
+ struct scic_sds_request *io_request)
+{
+ return sci_dev->state_handlers->complete_io_handler(
+ sci_dev, io_request);
+}
+
+/**
+ *
+ * @controller: The controller that is starting the task request.
+ * @sci_dev: The remote device for which the start task handling is being
+ * requested.
+ * @io_request: The task request that is being started.
+ *
+ * This method invokes the remote device start task handler. enum sci_status
+ */
+enum sci_status scic_sds_remote_device_start_task(
+ struct scic_sds_controller *controller,
+ struct scic_sds_remote_device *sci_dev,
+ struct scic_sds_request *io_request)
+{
+ return sci_dev->state_handlers->start_task_handler(
+ sci_dev, io_request);
+}
+
+/**
+ *
+ * @controller: The controller that is completing the task request.
+ * @sci_dev: The remote device for which the complete task handling is
+ * being requested.
+ * @io_request: The task request that is being completed.
+ *
+ * This method invokes the remote device complete task handler. enum sci_status
+ */
+
+/**
+ *
+ * @sci_dev:
+ * @request:
+ *
+ * This method takes the request and bulids an appropriate SCU context for the
+ * request and then requests the controller to post the request. none
+ */
+void scic_sds_remote_device_post_request(
+ struct scic_sds_remote_device *sci_dev,
+ u32 request)
+{
+ u32 context;
+
+ context = scic_sds_remote_device_build_command_context(sci_dev, request);
+
+ scic_sds_controller_post_request(
+ scic_sds_remote_device_get_controller(sci_dev),
+ context
+ );
+}
+
+#if !defined(DISABLE_ATAPI)
+/**
+ *
+ * @sci_dev: The device to be checked.
+ *
+ * This method check the signature fis of a stp device to decide whether a
+ * device is atapi or not. true if a device is atapi device. False if a device
+ * is not atapi.
+ */
+bool scic_sds_remote_device_is_atapi(
+ struct scic_sds_remote_device *sci_dev)
+{
+ if (!sci_dev->target_protocols.u.bits.attached_stp_target)
+ return false;
+ else if (sci_dev->is_direct_attached) {
+ struct scic_sds_phy *phy;
+ struct scic_sata_phy_properties properties;
+ struct sata_fis_reg_d2h *signature_fis;
+ phy = scic_sds_port_get_a_connected_phy(sci_dev->owning_port);
+ scic_sata_phy_get_properties(phy, &properties);
+
+ /* decode the signature fis. */
+ signature_fis = &(properties.signature_fis);
+
+ if ((signature_fis->sector_count == 0x01)
+ && (signature_fis->lba_low == 0x01)
+ && (signature_fis->lba_mid == 0x14)
+ && (signature_fis->lba_high == 0xEB)
+ && ((signature_fis->device & 0x5F) == 0x00)
+ ) {
+ /* An ATA device supporting the PACKET command set. */
+ return true;
+ } else
+ return false;
+ } else {
+ /* Expander supported ATAPI device is not currently supported. */
+ return false;
+ }
+}
+#endif
+
+/**
+ *
+ * @user_parameter: This is cast to a remote device object.
+ *
+ * This method is called once the remote node context is ready to be freed.
+ * The remote device can now report that its stop operation is complete. none
+ */
+static void scic_sds_cb_remote_device_rnc_destruct_complete(
+ void *user_parameter)
+{
+ struct scic_sds_remote_device *sci_dev;
+
+ sci_dev = (struct scic_sds_remote_device *)user_parameter;
+
+ BUG_ON(sci_dev->started_request_count != 0);
+
+ sci_base_state_machine_change_state(&sci_dev->state_machine,
+ SCI_BASE_REMOTE_DEVICE_STATE_STOPPED);
+}
+
+/**
+ *
+ * @user_parameter: This is cast to a remote device object.
+ *
+ * This method is called once the remote node context has transisitioned to a
+ * ready state. This is the indication that the remote device object can also
+ * transition to ready. none
+ */
+static void scic_sds_remote_device_resume_complete_handler(
+ void *user_parameter)
+{
+ struct scic_sds_remote_device *sci_dev;
+
+ sci_dev = (struct scic_sds_remote_device *)user_parameter;
+
+ if (
+ sci_base_state_machine_get_state(&sci_dev->state_machine)
+ != SCI_BASE_REMOTE_DEVICE_STATE_READY
+ ) {
+ sci_base_state_machine_change_state(
+ &sci_dev->state_machine,
+ SCI_BASE_REMOTE_DEVICE_STATE_READY
+ );
+ }
+}
+
+/**
+ *
+ * @device: This parameter specifies the device for which the request is being
+ * started.
+ * @request: This parameter specifies the request being started.
+ * @status: This parameter specifies the current start operation status.
+ *
+ * This method will perform the STP request start processing common to IO
+ * requests and task requests of all types. none
+ */
+void scic_sds_remote_device_start_request(
+ struct scic_sds_remote_device *sci_dev,
+ struct scic_sds_request *sci_req,
+ enum sci_status status)
+{
+ /* We still have a fault in starting the io complete it on the port */
+ if (status == SCI_SUCCESS)
+ scic_sds_remote_device_increment_request_count(sci_dev);
+ else{
+ sci_dev->owning_port->state_handlers->complete_io_handler(
+ sci_dev->owning_port, sci_dev, sci_req
+ );
+ }
+}
+
+
+/**
+ *
+ * @request: This parameter specifies the request being continued.
+ *
+ * This method will continue to post tc for a STP request. This method usually
+ * serves as a callback when RNC gets resumed during a task management
+ * sequence. none
+ */
+void scic_sds_remote_device_continue_request(void *dev)
+{
+ struct scic_sds_remote_device *sci_dev = dev;
+
+ /* we need to check if this request is still valid to continue. */
+ if (sci_dev->working_request)
+ scic_controller_continue_io(sci_dev->working_request);
+}
+
+/**
+ * This method will terminate all of the IO requests in the controllers IO
+ * request table that were targeted for this device.
+ * @sci_dev: This parameter specifies the remote device for which to
+ * attempt to terminate all requests.
+ *
+ * This method returns an indication as to whether all requests were
+ * successfully terminated. If a single request fails to be terminated, then
+ * this method will return the failure.
+ */
+static enum sci_status scic_sds_remote_device_terminate_requests(
+ struct scic_sds_remote_device *sci_dev)
+{
+ enum sci_status status = SCI_SUCCESS;
+ enum sci_status terminate_status = SCI_SUCCESS;
+ struct scic_sds_request *sci_req;
+ u32 index;
+ u32 request_count = sci_dev->started_request_count;
+
+ for (index = 0;
+ (index < SCI_MAX_IO_REQUESTS) && (request_count > 0);
+ index++) {
+ sci_req = sci_dev->owning_port->owning_controller->io_request_table[index];
+
+ if ((sci_req != NULL) && (sci_req->target_device == sci_dev)) {
+ terminate_status = scic_controller_terminate_request(
+ sci_dev->owning_port->owning_controller,
+ sci_dev,
+ sci_req
+ );
+
+ if (terminate_status != SCI_SUCCESS)
+ status = terminate_status;
+
+ request_count--;
+ }
+ }
+
+ return status;
+}
+
+static enum sci_status
+default_device_handler(struct scic_sds_remote_device *sci_dev,
+ const char *func)
+{
+ dev_warn(scirdev_to_dev(sci_dev),
+ "%s: in wrong state: %d\n", func,
+ sci_base_state_machine_get_state(&sci_dev->state_machine));
+ return SCI_FAILURE_INVALID_STATE;
+}
+
+enum sci_status scic_sds_remote_device_default_start_handler(
+ struct scic_sds_remote_device *sci_dev)
+{
+ return default_device_handler(sci_dev, __func__);
+}
+
+static enum sci_status scic_sds_remote_device_default_stop_handler(
+ struct scic_sds_remote_device *sci_dev)
+{
+ return default_device_handler(sci_dev, __func__);
+}
+
+enum sci_status scic_sds_remote_device_default_fail_handler(
+ struct scic_sds_remote_device *sci_dev)
+{
+ return default_device_handler(sci_dev, __func__);
+}
+
+enum sci_status scic_sds_remote_device_default_destruct_handler(
+ struct scic_sds_remote_device *sci_dev)
+{
+ return default_device_handler(sci_dev, __func__);
+}
+
+enum sci_status scic_sds_remote_device_default_reset_handler(
+ struct scic_sds_remote_device *sci_dev)
+{
+ return default_device_handler(sci_dev, __func__);
+}
+
+enum sci_status scic_sds_remote_device_default_reset_complete_handler(
+ struct scic_sds_remote_device *sci_dev)
+{
+ return default_device_handler(sci_dev, __func__);
+}
+
+enum sci_status scic_sds_remote_device_default_suspend_handler(
+ struct scic_sds_remote_device *sci_dev, u32 suspend_type)
+{
+ return default_device_handler(sci_dev, __func__);
+}
+
+enum sci_status scic_sds_remote_device_default_resume_handler(
+ struct scic_sds_remote_device *sci_dev)
+{
+ return default_device_handler(sci_dev, __func__);
+}
+
+/**
+ *
+ * @device: The struct scic_sds_remote_device which is then cast into a
+ * struct scic_sds_remote_device.
+ * @event_code: The event code that the struct scic_sds_controller wants the device
+ * object to process.
+ *
+ * This method is the default event handler. It will call the RNC state
+ * machine handler for any RNC events otherwise it will log a warning and
+ * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE
+ */
+static enum sci_status scic_sds_remote_device_core_event_handler(
+ struct scic_sds_remote_device *sci_dev,
+ u32 event_code,
+ bool is_ready_state)
+{
+ enum sci_status status;
+
+ switch (scu_get_event_type(event_code)) {
+ case SCU_EVENT_TYPE_RNC_OPS_MISC:
+ case SCU_EVENT_TYPE_RNC_SUSPEND_TX:
+ case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX:
+ status = scic_sds_remote_node_context_event_handler(&sci_dev->rnc, event_code);
+ break;
+ case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT:
+
+ if (scu_get_event_code(event_code) == SCU_EVENT_IT_NEXUS_TIMEOUT) {
+ status = SCI_SUCCESS;
+
+ /* Suspend the associated RNC */
+ scic_sds_remote_node_context_suspend(&sci_dev->rnc,
+ SCI_SOFTWARE_SUSPENSION,
+ NULL, NULL);
+
+ dev_dbg(scirdev_to_dev(sci_dev),
+ "%s: device: %p event code: %x: %s\n",
+ __func__, sci_dev, event_code,
+ (is_ready_state)
+ ? "I_T_Nexus_Timeout event"
+ : "I_T_Nexus_Timeout event in wrong state");
+
+ break;
+ }
+ /* Else, fall through and treat as unhandled... */
+
+ default:
+ dev_dbg(scirdev_to_dev(sci_dev),
+ "%s: device: %p event code: %x: %s\n",
+ __func__, sci_dev, event_code,
+ (is_ready_state)
+ ? "unexpected event"
+ : "unexpected event in wrong state");
+ status = SCI_FAILURE_INVALID_STATE;
+ break;
+ }
+
+ return status;
+}
+/**
+ *
+ * @device: The struct scic_sds_remote_device which is then cast into a
+ * struct scic_sds_remote_device.
+ * @event_code: The event code that the struct scic_sds_controller wants the device
+ * object to process.
+ *
+ * This method is the default event handler. It will call the RNC state
+ * machine handler for any RNC events otherwise it will log a warning and
+ * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE
+ */
+static enum sci_status scic_sds_remote_device_default_event_handler(
+ struct scic_sds_remote_device *sci_dev,
+ u32 event_code)
+{
+ return scic_sds_remote_device_core_event_handler(sci_dev,
+ event_code,
+ false);
+}
+
+/**
+ *
+ * @device: The struct scic_sds_remote_device which is then cast into a
+ * struct scic_sds_remote_device.
+ * @frame_index: The frame index for which the struct scic_sds_controller wants this
+ * device object to process.
+ *
+ * This method is the default unsolicited frame handler. It logs a warning,
+ * releases the frame and returns a failure. enum sci_status
+ * SCI_FAILURE_INVALID_STATE
+ */
+enum sci_status scic_sds_remote_device_default_frame_handler(
+ struct scic_sds_remote_device *sci_dev,
+ u32 frame_index)
+{
+ dev_warn(scirdev_to_dev(sci_dev),
+ "%s: SCIC Remote Device requested to handle frame %x "
+ "while in wrong state %d\n",
+ __func__,
+ frame_index,
+ sci_base_state_machine_get_state(
+ &sci_dev->state_machine));
+
+ /* Return the frame back to the controller */
+ scic_sds_controller_release_frame(
+ scic_sds_remote_device_get_controller(sci_dev), frame_index
+ );
+
+ return SCI_FAILURE_INVALID_STATE;
+}
+
+enum sci_status scic_sds_remote_device_default_start_request_handler(
+ struct scic_sds_remote_device *sci_dev,
+ struct scic_sds_request *request)
+{
+ return default_device_handler(sci_dev, __func__);
+}
+
+enum sci_status scic_sds_remote_device_default_complete_request_handler(
+ struct scic_sds_remote_device *sci_dev,
+ struct scic_sds_request *request)
+{
+ return default_device_handler(sci_dev, __func__);
+}
+
+enum sci_status scic_sds_remote_device_default_continue_request_handler(
+ struct scic_sds_remote_device *sci_dev,
+ struct scic_sds_request *request)
+{
+ return default_device_handler(sci_dev, __func__);
+}
+
+/**
+ *
+ * @device: The struct scic_sds_remote_device which is then cast into a
+ * struct scic_sds_remote_device.
+ * @frame_index: The frame index for which the struct scic_sds_controller wants this
+ * device object to process.
+ *
+ * This method is a general ssp frame handler. In most cases the device object
+ * needs to route the unsolicited frame processing to the io request object.
+ * This method decodes the tag for the io request object and routes the
+ * unsolicited frame to that object. enum sci_status SCI_FAILURE_INVALID_STATE
+ */
+enum sci_status scic_sds_remote_device_general_frame_handler(
+ struct scic_sds_remote_device *sci_dev,
+ u32 frame_index)
+{
+ enum sci_status result;
+ struct sci_ssp_frame_header *frame_header;
+ struct scic_sds_request *io_request;
+
+ result = scic_sds_unsolicited_frame_control_get_header(
+ &(scic_sds_remote_device_get_controller(sci_dev)->uf_control),
+ frame_index,
+ (void **)&frame_header
+ );
+
+ if (SCI_SUCCESS == result) {
+ io_request = scic_sds_controller_get_io_request_from_tag(
+ scic_sds_remote_device_get_controller(sci_dev), frame_header->tag);
+
+ if ((io_request == NULL)
+ || (io_request->target_device != sci_dev)) {
+ /*
+ * We could not map this tag to a valid IO request
+ * Just toss the frame and continue */
+ scic_sds_controller_release_frame(
+ scic_sds_remote_device_get_controller(sci_dev), frame_index
+ );
+ } else {
+ /* The IO request is now in charge of releasing the frame */
+ result = io_request->state_handlers->frame_handler(
+ io_request, frame_index);
+ }
+ }
+
+ return result;
+}
+
+/**
+ *
+ * @[in]: sci_dev This is the device object that is receiving the event.
+ * @[in]: event_code The event code to process.
+ *
+ * This is a common method for handling events reported to the remote device
+ * from the controller object. enum sci_status
+ */
+enum sci_status scic_sds_remote_device_general_event_handler(
+ struct scic_sds_remote_device *sci_dev,
+ u32 event_code)
+{
+ return scic_sds_remote_device_core_event_handler(sci_dev,
+ event_code,
+ true);
+}
+
+/*
+ * *****************************************************************************
+ * * STOPPED STATE HANDLERS
+ * ***************************************************************************** */
+
+/**
+ *
+ * @device:
+ *
+ * This method takes the struct scic_sds_remote_device from a stopped state and
+ * attempts to start it. The RNC buffer for the device is constructed and the
+ * device state machine is transitioned to the
+ * SCIC_BASE_REMOTE_DEVICE_STATE_STARTING. enum sci_status SCI_SUCCESS if there is
+ * an RNC buffer available to construct the remote device.
+ * SCI_FAILURE_INSUFFICIENT_RESOURCES if there is no RNC buffer available in
+ * which to construct the remote device.
+ */
+static enum sci_status scic_sds_remote_device_stopped_state_start_handler(
+ struct scic_sds_remote_device *sci_dev)
+{
+ enum sci_status status;
+
+ status = scic_sds_remote_node_context_resume(&sci_dev->rnc,
+ scic_sds_remote_device_resume_complete_handler, sci_dev);
+
+ if (status == SCI_SUCCESS)
+ sci_base_state_machine_change_state(&sci_dev->state_machine,
+ SCI_BASE_REMOTE_DEVICE_STATE_STARTING);
+
+ return status;
+}
+
+static enum sci_status scic_sds_remote_device_stopped_state_stop_handler(
+ struct scic_sds_remote_device *sci_dev)
+{
+ return SCI_SUCCESS;
+}
+
+/**
+ *
+ * @sci_dev: The struct scic_sds_remote_device which is cast into a
+ * struct scic_sds_remote_device.
+ *
+ * This method will destruct a struct scic_sds_remote_device that is in a stopped
+ * state. This is the only state from which a destruct request will succeed.
+ * The RNi for this struct scic_sds_remote_device is returned to the free pool and the
+ * device object transitions to the SCI_BASE_REMOTE_DEVICE_STATE_FINAL.
+ * enum sci_status SCI_SUCCESS
+ */
+static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler(
+ struct scic_sds_remote_device *sci_dev)
+{
+ struct scic_sds_controller *scic;
+
+ scic = scic_sds_remote_device_get_controller(sci_dev);
+ scic_sds_controller_free_remote_node_context(scic, sci_dev,
+ sci_dev->rnc.remote_node_index);
+ sci_dev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX;
+
+ sci_base_state_machine_change_state(&sci_dev->state_machine,
+ SCI_BASE_REMOTE_DEVICE_STATE_FINAL);
+
+ return SCI_SUCCESS;
+}
+
+/*
+ * *****************************************************************************
+ * * STARTING STATE HANDLERS
+ * ***************************************************************************** */
+
+static enum sci_status scic_sds_remote_device_starting_state_stop_handler(
+ struct scic_sds_remote_device *sci_dev)
+{
+ /*
+ * This device has not yet started so there had better be no IO requests
+ */
+ BUG_ON(sci_dev->started_request_count != 0);
+
+ /*
+ * Destroy the remote node context
+ */
+ scic_sds_remote_node_context_destruct(&sci_dev->rnc,
+ scic_sds_cb_remote_device_rnc_destruct_complete, sci_dev);
+
+ /*
+ * Transition to the stopping state and wait for the remote node to
+ * complete being posted and invalidated.
+ */
+ sci_base_state_machine_change_state(&sci_dev->state_machine,
+ SCI_BASE_REMOTE_DEVICE_STATE_STOPPING);
+
+ return SCI_SUCCESS;
+}
+
+enum sci_status scic_sds_remote_device_ready_state_stop_handler(
+ struct scic_sds_remote_device *sci_dev)
+{
+ enum sci_status status = SCI_SUCCESS;
+
+ /* Request the parent state machine to transition to the stopping state */
+ sci_base_state_machine_change_state(&sci_dev->state_machine,
+ SCI_BASE_REMOTE_DEVICE_STATE_STOPPING);
+
+ if (sci_dev->started_request_count == 0) {
+ scic_sds_remote_node_context_destruct(&sci_dev->rnc,
+ scic_sds_cb_remote_device_rnc_destruct_complete,
+ sci_dev);
+ } else
+ status = scic_sds_remote_device_terminate_requests(sci_dev);
+
+ return status;
+}
+
+/**
+ *
+ * @device: The struct scic_sds_remote_device object which is cast to a
+ * struct scic_sds_remote_device object.
+ *
+ * This is the ready state device reset handler enum sci_status
+ */
+enum sci_status scic_sds_remote_device_ready_state_reset_handler(
+ struct scic_sds_remote_device *sci_dev)
+{
+ /* Request the parent state machine to transition to the stopping state */
+ sci_base_state_machine_change_state(&sci_dev->state_machine,
+ SCI_BASE_REMOTE_DEVICE_STATE_RESETTING);
+
+ return SCI_SUCCESS;
+}
+
+/*
+ * This method will attempt to start a task request for this device object. The
+ * remote device object will issue the start request for the task and if
+ * successful it will start the request for the port object then increment its
+ * own requet count. enum sci_status SCI_SUCCESS if the task request is started for
+ * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request
+ * object could not get the resources to start.
+ */
+static enum sci_status scic_sds_remote_device_ready_state_start_task_handler(
+ struct scic_sds_remote_device *sci_dev,
+ struct scic_sds_request *request)
+{
+ enum sci_status result;
+
+ /* See if the port is in a state where we can start the IO request */
+ result = scic_sds_port_start_io(
+ scic_sds_remote_device_get_port(sci_dev), sci_dev, request);
+
+ if (result == SCI_SUCCESS) {
+ result = scic_sds_remote_node_context_start_task(&sci_dev->rnc,
+ request);
+ if (result == SCI_SUCCESS)
+ result = scic_sds_request_start(request);
+
+ scic_sds_remote_device_start_request(sci_dev, request, result);
+ }
+
+ return result;
+}
+
+/*
+ * This method will attempt to start an io request for this device object. The
+ * remote device object will issue the start request for the io and if
+ * successful it will start the request for the port object then increment its
+ * own requet count. enum sci_status SCI_SUCCESS if the io request is started for
+ * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request
+ * object could not get the resources to start.
+ */
+static enum sci_status scic_sds_remote_device_ready_state_start_io_handler(
+ struct scic_sds_remote_device *sci_dev,
+ struct scic_sds_request *request)
+{
+ enum sci_status result;
+
+ /* See if the port is in a state where we can start the IO request */
+ result = scic_sds_port_start_io(
+ scic_sds_remote_device_get_port(sci_dev), sci_dev, request);
+
+ if (result == SCI_SUCCESS) {
+ result = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request);
+ if (result == SCI_SUCCESS)
+ result = scic_sds_request_start(request);
+
+ scic_sds_remote_device_start_request(sci_dev, request, result);
+ }
+
+ return result;
+}
+
+/*
+ * This method will complete the request for the remote device object. The
+ * method will call the completion handler for the request object and if
+ * successful it will complete the request on the port object then decrement
+ * its own started_request_count. enum sci_status
+ */
+static enum sci_status scic_sds_remote_device_ready_state_complete_request_handler(
+ struct scic_sds_remote_device *sci_dev,
+ struct scic_sds_request *request)
+{
+ enum sci_status result;
+
+ result = scic_sds_request_complete(request);
+
+ if (result != SCI_SUCCESS)
+ return result;
+
+ /* See if the port is in a state
+ * where we can start the IO request */
+ result = scic_sds_port_complete_io(
+ scic_sds_remote_device_get_port(sci_dev),
+ sci_dev, request);
+
+ if (result == SCI_SUCCESS)
+ scic_sds_remote_device_decrement_request_count(sci_dev);
+
+ return result;
+}
+
+/*
+ * *****************************************************************************
+ * * STOPPING STATE HANDLERS
+ * ***************************************************************************** */
+
+/**
+ *
+ * @sci_dev: The struct scic_sds_remote_device which is cast into a
+ * struct scic_sds_remote_device.
+ *
+ * This method will stop a struct scic_sds_remote_device that is already in the
+ * SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This is not considered an error
+ * since we allow a stop request on a device that is alreay stopping or
+ * stopped. enum sci_status SCI_SUCCESS
+ */
+static enum sci_status scic_sds_remote_device_stopping_state_stop_handler(
+ struct scic_sds_remote_device *device)
+{
+ /*
+ * All requests should have been terminated, but if there is an
+ * attempt to stop a device already in the stopping state, then
+ * try again to terminate. */
+ return scic_sds_remote_device_terminate_requests(device);
+}
+
+
+/**
+ *
+ * @device: The device object for which the request is completing.
+ * @request: The task request that is being completed.
+ *
+ * This method completes requests for this struct scic_sds_remote_device while it is
+ * in the SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This method calls the
+ * complete method for the request object and if that is successful the port
+ * object is called to complete the task request. Then the device object itself
+ * completes the task request. If struct scic_sds_remote_device started_request_count
+ * goes to 0 and the invalidate RNC request has completed the device object can
+ * transition to the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED. enum sci_status
+ */
+static enum sci_status scic_sds_remote_device_stopping_state_complete_request_handler(
+ struct scic_sds_remote_device *sci_dev,
+ struct scic_sds_request *request)
+{
+ enum sci_status status = SCI_SUCCESS;
+
+ status = scic_sds_request_complete(request);
+
+ if (status != SCI_SUCCESS)
+ return status;
+
+ status = scic_sds_port_complete_io(scic_sds_remote_device_get_port(sci_dev),
+ sci_dev, request);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ scic_sds_remote_device_decrement_request_count(sci_dev);
+
+ if (scic_sds_remote_device_get_request_count(sci_dev) == 0)
+ scic_sds_remote_node_context_destruct(&sci_dev->rnc,
+ scic_sds_cb_remote_device_rnc_destruct_complete,
+ sci_dev);
+ return SCI_SUCCESS;
+}
+
+/**
+ *
+ * @device: The struct scic_sds_remote_device which is to be cast into a
+ * struct scic_sds_remote_device object.
+ *
+ * This method will complete the reset operation when the device is in the
+ * resetting state. enum sci_status
+ */
+static enum sci_status scic_sds_remote_device_resetting_state_reset_complete_handler(
+ struct scic_sds_remote_device *sci_dev)
+{
+
+ sci_base_state_machine_change_state(
+ &sci_dev->state_machine,
+ SCI_BASE_REMOTE_DEVICE_STATE_READY
+ );
+
+ return SCI_SUCCESS;
+}
+
+/**
+ *
+ * @device: The struct scic_sds_remote_device which is to be cast into a
+ * struct scic_sds_remote_device object.
+ *
+ * This method will stop the remote device while in the resetting state.
+ * enum sci_status
+ */
+static enum sci_status scic_sds_remote_device_resetting_state_stop_handler(
+ struct scic_sds_remote_device *sci_dev)
+{
+ sci_base_state_machine_change_state(
+ &sci_dev->state_machine,
+ SCI_BASE_REMOTE_DEVICE_STATE_STOPPING
+ );
+
+ return SCI_SUCCESS;
+}
+
+/*
+ * This method completes requests for this struct scic_sds_remote_device while it is
+ * in the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the
+ * complete method for the request object and if that is successful the port
+ * object is called to complete the task request. Then the device object itself
+ * completes the task request. enum sci_status
+ */
+static enum sci_status scic_sds_remote_device_resetting_state_complete_request_handler(
+ struct scic_sds_remote_device *sci_dev,
+ struct scic_sds_request *request)
+{
+ enum sci_status status = SCI_SUCCESS;
+
+ status = scic_sds_request_complete(request);
+
+ if (status == SCI_SUCCESS) {
+ status = scic_sds_port_complete_io(
+ scic_sds_remote_device_get_port(sci_dev),
+ sci_dev, request);
+
+ if (status == SCI_SUCCESS) {
+ scic_sds_remote_device_decrement_request_count(sci_dev);
+ }
+ }
+
+ return status;
+}
+
+static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = {
+ [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = {
+ .start_handler = scic_sds_remote_device_default_start_handler,
+ .stop_handler = scic_sds_remote_device_default_stop_handler,
+ .fail_handler = scic_sds_remote_device_default_fail_handler,
+ .destruct_handler = scic_sds_remote_device_default_destruct_handler,
+ .reset_handler = scic_sds_remote_device_default_reset_handler,
+ .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+ .start_io_handler = scic_sds_remote_device_default_start_request_handler,
+ .complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
+ .continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
+ .start_task_handler = scic_sds_remote_device_default_start_request_handler,
+ .complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
+ .suspend_handler = scic_sds_remote_device_default_suspend_handler,
+ .resume_handler = scic_sds_remote_device_default_resume_handler,
+ .event_handler = scic_sds_remote_device_default_event_handler,
+ .frame_handler = scic_sds_remote_device_default_frame_handler
+ },
+ [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = {
+ .start_handler = scic_sds_remote_device_stopped_state_start_handler,
+ .stop_handler = scic_sds_remote_device_stopped_state_stop_handler,
+ .fail_handler = scic_sds_remote_device_default_fail_handler,
+ .destruct_handler = scic_sds_remote_device_stopped_state_destruct_handler,
+ .reset_handler = scic_sds_remote_device_default_reset_handler,
+ .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+ .start_io_handler = scic_sds_remote_device_default_start_request_handler,
+ .complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
+ .continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
+ .start_task_handler = scic_sds_remote_device_default_start_request_handler,
+ .complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
+ .suspend_handler = scic_sds_remote_device_default_suspend_handler,
+ .resume_handler = scic_sds_remote_device_default_resume_handler,
+ .event_handler = scic_sds_remote_device_default_event_handler,
+ .frame_handler = scic_sds_remote_device_default_frame_handler
+ },
+ [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = {
+ .start_handler = scic_sds_remote_device_default_start_handler,
+ .stop_handler = scic_sds_remote_device_starting_state_stop_handler,
+ .fail_handler = scic_sds_remote_device_default_fail_handler,
+ .destruct_handler = scic_sds_remote_device_default_destruct_handler,
+ .reset_handler = scic_sds_remote_device_default_reset_handler,
+ .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+ .start_io_handler = scic_sds_remote_device_default_start_request_handler,
+ .complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
+ .continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
+ .start_task_handler = scic_sds_remote_device_default_start_request_handler,
+ .complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
+ .suspend_handler = scic_sds_remote_device_default_suspend_handler,
+ .resume_handler = scic_sds_remote_device_default_resume_handler,
+ .event_handler = scic_sds_remote_device_general_event_handler,
+ .frame_handler = scic_sds_remote_device_default_frame_handler
+ },
+ [SCI_BASE_REMOTE_DEVICE_STATE_READY] = {
+ .start_handler = scic_sds_remote_device_default_start_handler,
+ .stop_handler = scic_sds_remote_device_ready_state_stop_handler,
+ .fail_handler = scic_sds_remote_device_default_fail_handler,
+ .destruct_handler = scic_sds_remote_device_default_destruct_handler,
+ .reset_handler = scic_sds_remote_device_ready_state_reset_handler,
+ .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+ .start_io_handler = scic_sds_remote_device_ready_state_start_io_handler,
+ .complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler,
+ .continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
+ .start_task_handler = scic_sds_remote_device_ready_state_start_task_handler,
+ .complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler,
+ .suspend_handler = scic_sds_remote_device_default_suspend_handler,
+ .resume_handler = scic_sds_remote_device_default_resume_handler,
+ .event_handler = scic_sds_remote_device_general_event_handler,
+ .frame_handler = scic_sds_remote_device_general_frame_handler,
+ },
+ [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = {
+ .start_handler = scic_sds_remote_device_default_start_handler,
+ .stop_handler = scic_sds_remote_device_stopping_state_stop_handler,
+ .fail_handler = scic_sds_remote_device_default_fail_handler,
+ .destruct_handler = scic_sds_remote_device_default_destruct_handler,
+ .reset_handler = scic_sds_remote_device_default_reset_handler,
+ .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+ .start_io_handler = scic_sds_remote_device_default_start_request_handler,
+ .complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler,
+ .continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
+ .start_task_handler = scic_sds_remote_device_default_start_request_handler,
+ .complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler,
+ .suspend_handler = scic_sds_remote_device_default_suspend_handler,
+ .resume_handler = scic_sds_remote_device_default_resume_handler,
+ .event_handler = scic_sds_remote_device_general_event_handler,
+ .frame_handler = scic_sds_remote_device_general_frame_handler
+ },
+ [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = {
+ .start_handler = scic_sds_remote_device_default_start_handler,
+ .stop_handler = scic_sds_remote_device_default_stop_handler,
+ .fail_handler = scic_sds_remote_device_default_fail_handler,
+ .destruct_handler = scic_sds_remote_device_default_destruct_handler,
+ .reset_handler = scic_sds_remote_device_default_reset_handler,
+ .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+ .start_io_handler = scic_sds_remote_device_default_start_request_handler,
+ .complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
+ .continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
+ .start_task_handler = scic_sds_remote_device_default_start_request_handler,
+ .complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
+ .suspend_handler = scic_sds_remote_device_default_suspend_handler,
+ .resume_handler = scic_sds_remote_device_default_resume_handler,
+ .event_handler = scic_sds_remote_device_default_event_handler,
+ .frame_handler = scic_sds_remote_device_general_frame_handler
+ },
+ [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = {
+ .start_handler = scic_sds_remote_device_default_start_handler,
+ .stop_handler = scic_sds_remote_device_resetting_state_stop_handler,
+ .fail_handler = scic_sds_remote_device_default_fail_handler,
+ .destruct_handler = scic_sds_remote_device_default_destruct_handler,
+ .reset_handler = scic_sds_remote_device_default_reset_handler,
+ .reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler,
+ .start_io_handler = scic_sds_remote_device_default_start_request_handler,
+ .complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler,
+ .continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
+ .start_task_handler = scic_sds_remote_device_default_start_request_handler,
+ .complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler,
+ .suspend_handler = scic_sds_remote_device_default_suspend_handler,
+ .resume_handler = scic_sds_remote_device_default_resume_handler,
+ .event_handler = scic_sds_remote_device_default_event_handler,
+ .frame_handler = scic_sds_remote_device_general_frame_handler
+ },
+ [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = {
+ .start_handler = scic_sds_remote_device_default_start_handler,
+ .stop_handler = scic_sds_remote_device_default_stop_handler,
+ .fail_handler = scic_sds_remote_device_default_fail_handler,
+ .destruct_handler = scic_sds_remote_device_default_destruct_handler,
+ .reset_handler = scic_sds_remote_device_default_reset_handler,
+ .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+ .start_io_handler = scic_sds_remote_device_default_start_request_handler,
+ .complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
+ .continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
+ .start_task_handler = scic_sds_remote_device_default_start_request_handler,
+ .complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
+ .suspend_handler = scic_sds_remote_device_default_suspend_handler,
+ .resume_handler = scic_sds_remote_device_default_resume_handler,
+ .event_handler = scic_sds_remote_device_default_event_handler,
+ .frame_handler = scic_sds_remote_device_default_frame_handler
+ }
+};
+
+static void scic_sds_remote_device_initial_state_enter(
+ struct sci_base_object *object)
+{
+ struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object;
+
+ sci_dev = container_of(object, typeof(*sci_dev), parent);
+ SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
+ SCI_BASE_REMOTE_DEVICE_STATE_INITIAL);
+
+ /* Initial state is a transitional state to the stopped state */
+ sci_base_state_machine_change_state(&sci_dev->state_machine,
+ SCI_BASE_REMOTE_DEVICE_STATE_STOPPED);
+}
+
+/**
+ * isci_remote_device_change_state() - This function gets the status of the
+ * remote_device object.
+ * @isci_device: This parameter points to the isci_remote_device object
+ *
+ * status of the object as a isci_status enum.
+ */
+void isci_remote_device_change_state(
+ struct isci_remote_device *isci_device,
+ enum isci_status status)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&isci_device->state_lock, flags);
+ isci_device->status = status;
+ spin_unlock_irqrestore(&isci_device->state_lock, flags);
+}
+
+/**
+ * scic_remote_device_destruct() - free remote node context and destruct
+ * @remote_device: This parameter specifies the remote device to be destructed.
+ *
+ * Remote device objects are a limited resource. As such, they must be
+ * protected. Thus calls to construct and destruct are mutually exclusive and
+ * non-reentrant. The return value shall indicate if the device was
+ * successfully destructed or if some failure occurred. enum sci_status This value
+ * is returned if the device is successfully destructed.
+ * SCI_FAILURE_INVALID_REMOTE_DEVICE This value is returned if the supplied
+ * device isn't valid (e.g. it's already been destoryed, the handle isn't
+ * valid, etc.).
+ */
+static enum sci_status scic_remote_device_destruct(struct scic_sds_remote_device *sci_dev)
+{
+ return sci_dev->state_handlers->destruct_handler(sci_dev);
+}
+
/**
* isci_remote_device_deconstruct() - This function frees an isci_remote_device.
* @ihost: This parameter specifies the isci host object.
@@ -98,6 +1249,418 @@
wake_up(&ihost->eventq);
}
+/**
+ * isci_remote_device_stop_complete() - This function is called by the scic
+ * when the remote device stop has completed. We mark the isci device as not
+ * ready and remove the isci remote device.
+ * @ihost: This parameter specifies the isci host object.
+ * @idev: This parameter specifies the remote device.
+ * @status: This parameter specifies status of the completion.
+ *
+ */
+static void isci_remote_device_stop_complete(struct isci_host *ihost,
+ struct isci_remote_device *idev)
+{
+ dev_dbg(&ihost->pdev->dev, "%s: complete idev = %p\n", __func__, idev);
+
+ isci_remote_device_change_state(idev, isci_stopped);
+
+ /* after stop, we can tear down resources. */
+ isci_remote_device_deconstruct(ihost, idev);
+}
+
+static void scic_sds_remote_device_stopped_state_enter(
+ struct sci_base_object *object)
+{
+ struct scic_sds_remote_device *sci_dev;
+ struct scic_sds_controller *scic;
+ struct isci_remote_device *idev;
+ struct isci_host *ihost;
+ u32 prev_state;
+
+ sci_dev = container_of(object, typeof(*sci_dev), parent);
+ scic = scic_sds_remote_device_get_controller(sci_dev);
+ ihost = sci_object_get_association(scic);
+ idev = sci_object_get_association(sci_dev);
+
+ SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
+ SCI_BASE_REMOTE_DEVICE_STATE_STOPPED);
+
+ /* If we are entering from the stopping state let the SCI User know that
+ * the stop operation has completed.
+ */
+ prev_state = sci_dev->state_machine.previous_state_id;
+ if (prev_state == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING)
+ isci_remote_device_stop_complete(ihost, idev);
+
+ scic_sds_controller_remote_device_stopped(scic, sci_dev);
+}
+
+static void scic_sds_remote_device_starting_state_enter(struct sci_base_object *object)
+{
+ struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev),
+ parent);
+ struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
+ struct isci_host *ihost = sci_object_get_association(scic);
+ struct isci_remote_device *idev = sci_object_get_association(sci_dev);
+
+ SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
+ SCI_BASE_REMOTE_DEVICE_STATE_STARTING);
+
+ isci_remote_device_not_ready(ihost, idev,
+ SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED);
+}
+
+static void scic_sds_remote_device_ready_state_enter(struct sci_base_object *object)
+{
+ struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev),
+ parent);
+ struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
+ struct isci_host *ihost = sci_object_get_association(scic);
+ struct isci_remote_device *idev = sci_object_get_association(sci_dev);
+
+ SET_STATE_HANDLER(sci_dev,
+ scic_sds_remote_device_state_handler_table,
+ SCI_BASE_REMOTE_DEVICE_STATE_READY);
+
+ scic->remote_device_sequence[sci_dev->rnc.remote_node_index]++;
+
+ if (sci_dev->has_ready_substate_machine)
+ sci_base_state_machine_start(&sci_dev->ready_substate_machine);
+ else
+ isci_remote_device_ready(ihost, idev);
+}
+
+static void scic_sds_remote_device_ready_state_exit(
+ struct sci_base_object *object)
+{
+ struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev),
+ parent);
+ if (sci_dev->has_ready_substate_machine)
+ sci_base_state_machine_stop(&sci_dev->ready_substate_machine);
+ else {
+ struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
+ struct isci_host *ihost = sci_object_get_association(scic);
+ struct isci_remote_device *idev = sci_object_get_association(sci_dev);
+
+ isci_remote_device_not_ready(ihost, idev,
+ SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED);
+ }
+}
+
+static void scic_sds_remote_device_stopping_state_enter(
+ struct sci_base_object *object)
+{
+ struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object;
+
+ SET_STATE_HANDLER(
+ sci_dev,
+ scic_sds_remote_device_state_handler_table,
+ SCI_BASE_REMOTE_DEVICE_STATE_STOPPING
+ );
+}
+
+static void scic_sds_remote_device_failed_state_enter(
+ struct sci_base_object *object)
+{
+ struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object;
+
+ SET_STATE_HANDLER(
+ sci_dev,
+ scic_sds_remote_device_state_handler_table,
+ SCI_BASE_REMOTE_DEVICE_STATE_FAILED
+ );
+}
+
+static void scic_sds_remote_device_resetting_state_enter(
+ struct sci_base_object *object)
+{
+ struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object;
+
+ SET_STATE_HANDLER(
+ sci_dev,
+ scic_sds_remote_device_state_handler_table,
+ SCI_BASE_REMOTE_DEVICE_STATE_RESETTING
+ );
+
+ scic_sds_remote_node_context_suspend(
+ &sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL);
+}
+
+static void scic_sds_remote_device_resetting_state_exit(
+ struct sci_base_object *object)
+{
+ struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object;
+
+ scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL);
+}
+
+static void scic_sds_remote_device_final_state_enter(
+ struct sci_base_object *object)
+{
+ struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object;
+
+ SET_STATE_HANDLER(
+ sci_dev,
+ scic_sds_remote_device_state_handler_table,
+ SCI_BASE_REMOTE_DEVICE_STATE_FINAL
+ );
+}
+
+
+static const struct sci_base_state scic_sds_remote_device_state_table[] = {
+ [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = {
+ .enter_state = scic_sds_remote_device_initial_state_enter,
+ },
+ [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = {
+ .enter_state = scic_sds_remote_device_stopped_state_enter,
+ },
+ [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = {
+ .enter_state = scic_sds_remote_device_starting_state_enter,
+ },
+ [SCI_BASE_REMOTE_DEVICE_STATE_READY] = {
+ .enter_state = scic_sds_remote_device_ready_state_enter,
+ .exit_state = scic_sds_remote_device_ready_state_exit
+ },
+ [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = {
+ .enter_state = scic_sds_remote_device_stopping_state_enter,
+ },
+ [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = {
+ .enter_state = scic_sds_remote_device_failed_state_enter,
+ },
+ [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = {
+ .enter_state = scic_sds_remote_device_resetting_state_enter,
+ .exit_state = scic_sds_remote_device_resetting_state_exit
+ },
+ [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = {
+ .enter_state = scic_sds_remote_device_final_state_enter,
+ },
+};
+
+/**
+ * scic_remote_device_construct() - This method will perform the construction
+ * common to all remote device objects.
+ * @sci_port: SAS/SATA port through which this device is accessed.
+ * @sci_dev: remote device to construct
+ *
+ * It isn't necessary to call scic_remote_device_destruct() for device objects
+ * that have only called this method for construction. Once subsequent
+ * construction methods have been invoked (e.g.
+ * scic_remote_device_da_construct()), then destruction should occur. none
+ */
+static void scic_remote_device_construct(struct scic_sds_port *sci_port,
+ struct scic_sds_remote_device *sci_dev)
+{
+ sci_dev->owning_port = sci_port;
+ sci_dev->started_request_count = 0;
+ sci_dev->parent.private = NULL;
+
+ sci_base_state_machine_construct(
+ &sci_dev->state_machine,
+ &sci_dev->parent,
+ scic_sds_remote_device_state_table,
+ SCI_BASE_REMOTE_DEVICE_STATE_INITIAL
+ );
+
+ sci_base_state_machine_start(
+ &sci_dev->state_machine
+ );
+
+ scic_sds_remote_node_context_construct(&sci_dev->rnc,
+ SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX);
+
+ sci_object_set_association(&sci_dev->rnc, sci_dev);
+}
+
+/**
+ * scic_remote_device_da_construct() - This method will construct a
+ * SCIC_REMOTE_DEVICE object for a direct attached (da) device. The
+ * information (e.g. IAF, Signature FIS, etc.) necessary to build the device
+ * is known to the SCI Core since it is contained in the scic_phy object.
+ * @remote_device: This parameter specifies the remote device to be destructed.
+ *
+ * The user must have previously called scic_remote_device_construct() Remote
+ * device objects are a limited resource. As such, they must be protected.
+ * Thus calls to construct and destruct are mutually exclusive and
+ * non-reentrant. Indicate if the remote device was successfully constructed.
+ * SCI_SUCCESS Returned if the device was successfully constructed.
+ * SCI_FAILURE_DEVICE_EXISTS Returned if the device has already been
+ * constructed. If it's an additional phy for the target, then call
+ * scic_remote_device_da_add_phy(). SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned
+ * if the supplied parameters necessitate creation of a remote device for which
+ * the protocol is not supported by the underlying controller hardware.
+ * SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if the core
+ * controller associated with the supplied parameters is unable to support
+ * additional remote devices.
+ */
+static enum sci_status scic_remote_device_da_construct(struct scic_sds_remote_device *sci_dev)
+{
+ enum sci_status status;
+ u16 remote_node_index;
+ struct sci_sas_identify_address_frame_protocols protocols;
+
+ /*
+ * This information is request to determine how many remote node context
+ * entries will be needed to store the remote node.
+ */
+ scic_sds_port_get_attached_protocols(sci_dev->owning_port, &protocols);
+ sci_dev->target_protocols.u.all = protocols.u.all;
+ sci_dev->is_direct_attached = true;
+#if !defined(DISABLE_ATAPI)
+ sci_dev->is_atapi = scic_sds_remote_device_is_atapi(sci_dev);
+#endif
+
+ status = scic_sds_controller_allocate_remote_node_context(
+ sci_dev->owning_port->owning_controller,
+ sci_dev,
+ &remote_node_index);
+
+ if (status == SCI_SUCCESS) {
+ sci_dev->rnc.remote_node_index = remote_node_index;
+
+ scic_sds_port_get_attached_sas_address(
+ sci_dev->owning_port, &sci_dev->device_address);
+
+ if (sci_dev->target_protocols.u.bits.attached_ssp_target) {
+ sci_dev->has_ready_substate_machine = false;
+ } else if (sci_dev->target_protocols.u.bits.attached_stp_target) {
+ sci_dev->has_ready_substate_machine = true;
+
+ sci_base_state_machine_construct(
+ &sci_dev->ready_substate_machine,
+ &sci_dev->parent,
+ scic_sds_stp_remote_device_ready_substate_table,
+ SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
+ } else if (sci_dev->target_protocols.u.bits.attached_smp_target) {
+ sci_dev->has_ready_substate_machine = true;
+
+ /* add the SMP ready substate machine construction here */
+ sci_base_state_machine_construct(
+ &sci_dev->ready_substate_machine,
+ &sci_dev->parent,
+ scic_sds_smp_remote_device_ready_substate_table,
+ SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
+ }
+
+ sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed(
+ sci_dev->owning_port);
+
+ /* / @todo Should I assign the port width by reading all of the phys on the port? */
+ sci_dev->device_port_width = 1;
+ }
+
+ return status;
+}
+
+static void scic_sds_remote_device_get_info_from_smp_discover_response(
+ struct scic_sds_remote_device *sci_dev,
+ struct smp_response_discover *discover_response)
+{
+ /* decode discover_response to set sas_address to sci_dev. */
+ sci_dev->device_address.high =
+ discover_response->attached_sas_address.high;
+
+ sci_dev->device_address.low =
+ discover_response->attached_sas_address.low;
+
+ sci_dev->target_protocols.u.all = discover_response->protocols.u.all;
+}
+
+/**
+ * scic_remote_device_ea_construct() - This method will construct an
+ * SCIC_REMOTE_DEVICE object for an expander attached (ea) device from an
+ * SMP Discover Response.
+ * @remote_device: This parameter specifies the remote device to be destructed.
+ * @discover_response: This parameter specifies the SMP Discovery Response to
+ * be used in device creation.
+ *
+ * The user must have previously called scic_remote_device_construct() Remote
+ * device objects are a limited resource. As such, they must be protected.
+ * Thus calls to construct and destruct are mutually exclusive and
+ * non-reentrant. Indicate if the remote device was successfully constructed.
+ * SCI_SUCCESS Returned if the device was successfully constructed.
+ * SCI_FAILURE_DEVICE_EXISTS Returned if the device has already been
+ * constructed. If it's an additional phy for the target, then call
+ * scic_ea_remote_device_add_phy(). SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned
+ * if the supplied parameters necessitate creation of a remote device for which
+ * the protocol is not supported by the underlying controller hardware.
+ * SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if the core
+ * controller associated with the supplied parameters is unable to support
+ * additional remote devices.
+ */
+static enum sci_status scic_remote_device_ea_construct(struct scic_sds_remote_device *sci_dev,
+ struct smp_response_discover *discover_response)
+{
+ enum sci_status status;
+ struct scic_sds_controller *scic;
+
+ scic = scic_sds_port_get_controller(sci_dev->owning_port);
+
+ scic_sds_remote_device_get_info_from_smp_discover_response(
+ sci_dev, discover_response);
+
+ status = scic_sds_controller_allocate_remote_node_context(
+ scic, sci_dev, &sci_dev->rnc.remote_node_index);
+
+ if (status == SCI_SUCCESS) {
+ if (sci_dev->target_protocols.u.bits.attached_ssp_target) {
+ sci_dev->has_ready_substate_machine = false;
+ } else if (sci_dev->target_protocols.u.bits.attached_smp_target) {
+ sci_dev->has_ready_substate_machine = true;
+
+ /* add the SMP ready substate machine construction here */
+ sci_base_state_machine_construct(
+ &sci_dev->ready_substate_machine,
+ &sci_dev->parent,
+ scic_sds_smp_remote_device_ready_substate_table,
+ SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
+ } else if (sci_dev->target_protocols.u.bits.attached_stp_target) {
+ sci_dev->has_ready_substate_machine = true;
+
+ sci_base_state_machine_construct(
+ &sci_dev->ready_substate_machine,
+ &sci_dev->parent,
+ scic_sds_stp_remote_device_ready_substate_table,
+ SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
+ }
+
+ /*
+ * For SAS-2 the physical link rate is actually a logical link
+ * rate that incorporates multiplexing. The SCU doesn't
+ * incorporate multiplexing and for the purposes of the
+ * connection the logical link rate is that same as the
+ * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay
+ * one another, so this code works for both situations. */
+ sci_dev->connection_rate = min_t(u16,
+ scic_sds_port_get_max_allowed_speed(sci_dev->owning_port),
+ discover_response->u2.sas1_1.negotiated_physical_link_rate
+ );
+
+ /* / @todo Should I assign the port width by reading all of the phys on the port? */
+ sci_dev->device_port_width = 1;
+ }
+
+ return status;
+}
+
+/**
+ * scic_remote_device_start() - This method will start the supplied remote
+ * device. This method enables normal IO requests to flow through to the
+ * remote device.
+ * @remote_device: This parameter specifies the device to be started.
+ * @timeout: This parameter specifies the number of milliseconds in which the
+ * start operation should complete.
+ *
+ * An indication of whether the device was successfully started. SCI_SUCCESS
+ * This value is returned if the device was successfully started.
+ * SCI_FAILURE_INVALID_PHY This value is returned if the user attempts to start
+ * the device when there have been no phys added to it.
+ */
+static enum sci_status scic_remote_device_start(struct scic_sds_remote_device *sci_dev,
+ u32 timeout)
+{
+ return sci_dev->state_handlers->start_handler(sci_dev);
+}
/**
* isci_remote_device_construct() - This function calls the scic remote device
@@ -307,51 +1870,6 @@
}
/**
- * isci_remote_device_stop_complete() - This function is called by the scic
- * when the remote device stop has completed. We mark the isci device as not
- * ready and remove the isci remote device.
- * @isci_host: This parameter specifies the isci host object.
- * @isci_device: This parameter specifies the remote device.
- * @status: This parameter specifies status of the completion.
- *
- */
-void isci_remote_device_stop_complete(
- struct isci_host *isci_host,
- struct isci_remote_device *isci_device,
- enum sci_status status)
-{
- dev_dbg(&isci_host->pdev->dev,
- "%s: complete isci_device = %p, status = 0x%x\n",
- __func__,
- isci_device,
- status);
-
- isci_remote_device_change_state(isci_device, isci_stopped);
-
- /* after stop, we can tear down resources. */
- isci_remote_device_deconstruct(isci_host, isci_device);
-
-}
-
-/**
- * isci_remote_device_start_complete() - This function is called by the scic
- * when the remote device start has completed
- * @isci_host: This parameter specifies the isci host object.
- * @isci_device: This parameter specifies the remote device.
- * @status: This parameter specifies status of the completion.
- *
- */
-void isci_remote_device_start_complete(
- struct isci_host *isci_host,
- struct isci_remote_device *isci_device,
- enum sci_status status)
-{
-
-
-}
-
-
-/**
* isci_remote_device_stop() - This function is called internally to stop the
* remote device.
* @isci_host: This parameter specifies the isci host object.
@@ -572,21 +2090,3 @@
}
spin_unlock_irqrestore(&ihost->scic_lock, flags);
}
-
-/**
- * isci_remote_device_change_state() - This function gets the status of the
- * remote_device object.
- * @isci_device: This parameter points to the isci_remote_device object
- *
- * status of the object as a isci_status enum.
- */
-void isci_remote_device_change_state(
- struct isci_remote_device *isci_device,
- enum isci_status status)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&isci_device->state_lock, flags);
- isci_device->status = status;
- spin_unlock_irqrestore(&isci_device->state_lock, flags);
-}
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index aeda395..9d8fcbf 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -53,11 +53,127 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#if !defined(_ISCI_REMOTE_DEVICE_H_)
+#ifndef _ISCI_REMOTE_DEVICE_H_
#define _ISCI_REMOTE_DEVICE_H_
-#include "scic_sds_remote_device.h"
+#include <scsi/libsas.h>
+#include "sci_status.h"
+#include "intel_sas.h"
+#include "scu_remote_node_context.h"
+#include "remote_node_context.h"
+#include "port.h"
-struct isci_host;
+enum scic_remote_device_not_ready_reason_code {
+ SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED,
+ SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED,
+ SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED,
+ SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED,
+ SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED,
+
+ SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX
+
+};
+
+struct scic_sds_remote_device {
+ /**
+ * The field specifies that the parent object for the base remote
+ * device is the base object itself.
+ */
+ struct sci_base_object parent;
+
+ /**
+ * This field contains the information for the base remote device state
+ * machine.
+ */
+ struct sci_base_state_machine state_machine;
+
+ /**
+ * This field is the programmed device port width. This value is
+ * written to the RCN data structure to tell the SCU how many open
+ * connections this device can have.
+ */
+ u32 device_port_width;
+
+ /**
+ * This field is the programmed connection rate for this remote device. It is
+ * used to program the TC with the maximum allowed connection rate.
+ */
+ enum sas_linkrate connection_rate;
+
+ /**
+ * This field contains the allowed target protocols for this remote device.
+ */
+ struct smp_discover_response_protocols target_protocols;
+
+ /**
+ * This field contains the device SAS address.
+ */
+ struct sci_sas_address device_address;
+
+ /**
+ * This filed is assinged the value of true if the device is directly
+ * attached to the port.
+ */
+ bool is_direct_attached;
+
+#if !defined(DISABLE_ATAPI)
+ /**
+ * This filed is assinged the value of true if the device is an ATAPI
+ * device.
+ */
+ bool is_atapi;
+#endif
+
+ /**
+ * This filed contains a pointer back to the port to which this device
+ * is assigned.
+ */
+ struct scic_sds_port *owning_port;
+
+ /**
+ * This field contains the SCU silicon remote node context specific
+ * information.
+ */
+ struct scic_sds_remote_node_context rnc;
+
+ /**
+ * This field contains the stated request count for the remote device. The
+ * device can not reach the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED until all
+ * requests are complete and the rnc_posted value is false.
+ */
+ u32 started_request_count;
+
+ /**
+ * This field contains a pointer to the working request object. It is only
+ * used only for SATA requests since the unsolicited frames we get from the
+ * hardware have no Tag value to look up the io request object.
+ */
+ struct scic_sds_request *working_request;
+
+ /**
+ * This field contains the reason for the remote device going not_ready. It is
+ * assigned in the state handlers and used in the state transition.
+ */
+ u32 not_ready_reason;
+
+ /**
+ * This field is true if this remote device has an initialzied ready substate
+ * machine. SSP devices do not have a ready substate machine and STP devices
+ * have a ready substate machine.
+ */
+ bool has_ready_substate_machine;
+
+ /**
+ * This field contains the state machine for the ready substate machine for
+ * this struct scic_sds_remote_device object.
+ */
+ struct sci_base_state_machine ready_substate_machine;
+
+ /**
+ * This field maintains the set of state handlers for the remote device
+ * object. These are changed each time the remote device enters a new state.
+ */
+ const struct scic_sds_remote_device_state_handler *state_handlers;
+};
struct isci_remote_device {
enum isci_status status;
@@ -75,12 +191,6 @@
#define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000
-void isci_remote_device_start_complete(struct isci_host *ihost,
- struct isci_remote_device *idev,
- enum sci_status);
-void isci_remote_device_stop_complete(struct isci_host *ihost,
- struct isci_remote_device *idev,
- enum sci_status);
enum sci_status isci_remote_device_stop(struct isci_host *ihost,
struct isci_remote_device *idev);
void isci_remote_device_nuke_requests(struct isci_host *ihost,
@@ -97,5 +207,619 @@
struct isci_remote_device *idev);
void isci_remote_device_change_state(struct isci_remote_device *idev,
enum isci_status status);
+/**
+ * scic_remote_device_stop() - This method will stop both transmission and
+ * reception of link activity for the supplied remote device. This method
+ * disables normal IO requests from flowing through to the remote device.
+ * @remote_device: This parameter specifies the device to be stopped.
+ * @timeout: This parameter specifies the number of milliseconds in which the
+ * stop operation should complete.
+ *
+ * An indication of whether the device was successfully stopped. SCI_SUCCESS
+ * This value is returned if the transmission and reception for the device was
+ * successfully stopped.
+ */
+enum sci_status scic_remote_device_stop(
+ struct scic_sds_remote_device *remote_device,
+ u32 timeout);
+
+/**
+ * scic_remote_device_reset() - This method will reset the device making it
+ * ready for operation. This method must be called anytime the device is
+ * reset either through a SMP phy control or a port hard reset request.
+ * @remote_device: This parameter specifies the device to be reset.
+ *
+ * This method does not actually cause the device hardware to be reset. This
+ * method resets the software object so that it will be operational after a
+ * device hardware reset completes. An indication of whether the device reset
+ * was accepted. SCI_SUCCESS This value is returned if the device reset is
+ * started.
+ */
+enum sci_status scic_remote_device_reset(
+ struct scic_sds_remote_device *remote_device);
+
+/**
+ * scic_remote_device_reset_complete() - This method informs the device object
+ * that the reset operation is complete and the device can resume operation
+ * again.
+ * @remote_device: This parameter specifies the device which is to be informed
+ * of the reset complete operation.
+ *
+ * An indication that the device is resuming operation. SCI_SUCCESS the device
+ * is resuming operation.
+ */
+enum sci_status scic_remote_device_reset_complete(
+ struct scic_sds_remote_device *remote_device);
+
+
+
+/**
+ * scic_remote_device_get_connection_rate() - This method simply returns the
+ * link rate at which communications to the remote device occur.
+ * @remote_device: This parameter specifies the device for which to get the
+ * connection rate.
+ *
+ * Return the link rate at which we transfer for the supplied remote device.
+ */
+enum sas_linkrate scic_remote_device_get_connection_rate(
+ struct scic_sds_remote_device *remote_device);
+
+/**
+ * scic_remote_device_get_protocols() - This method will indicate which
+ * protocols are supported by this remote device.
+ * @remote_device: This parameter specifies the device for which to return the
+ * protocol.
+ * @protocols: This parameter specifies the output values, from the remote
+ * device object, which indicate the protocols supported by the supplied
+ * remote_device.
+ *
+ * The type of protocols supported by this device. The values are returned as
+ * part of a bit mask in order to allow for multi-protocol support.
+ */
+void scic_remote_device_get_protocols(
+ struct scic_sds_remote_device *remote_device,
+ struct smp_discover_response_protocols *protocols);
+
+
+#if !defined(DISABLE_ATAPI)
+/**
+ * scic_remote_device_is_atapi() -
+ * @this_device: The device whose type is to be decided.
+ *
+ * This method first decide whether a device is a stp target, then decode the
+ * signature fis of a DA STP device to tell whether it is a standard end disk
+ * or an ATAPI device. bool Indicate a device is ATAPI device or not.
+ */
+bool scic_remote_device_is_atapi(
+ struct scic_sds_remote_device *device_handle);
+#else /* !defined(DISABLE_ATAPI) */
+#define scic_remote_device_is_atapi(device_handle) false
+#endif /* !defined(DISABLE_ATAPI) */
+
+
+
+/**
+ * enum scic_sds_remote_device_states - This enumeration depicts all the states
+ * for the common remote device state machine.
+ *
+ *
+ */
+enum scic_sds_remote_device_states {
+ /**
+ * Simply the initial state for the base remote device state machine.
+ */
+ SCI_BASE_REMOTE_DEVICE_STATE_INITIAL,
+
+ /**
+ * This state indicates that the remote device has successfully been
+ * stopped. In this state no new IO operations are permitted.
+ * This state is entered from the INITIAL state.
+ * This state is entered from the STOPPING state.
+ */
+ SCI_BASE_REMOTE_DEVICE_STATE_STOPPED,
+
+ /**
+ * This state indicates the the remote device is in the process of
+ * becoming ready (i.e. starting). In this state no new IO operations
+ * are permitted.
+ * This state is entered from the STOPPED state.
+ */
+ SCI_BASE_REMOTE_DEVICE_STATE_STARTING,
+
+ /**
+ * This state indicates the remote device is now ready. Thus, the user
+ * is able to perform IO operations on the remote device.
+ * This state is entered from the STARTING state.
+ */
+ SCI_BASE_REMOTE_DEVICE_STATE_READY,
+
+ /**
+ * This state indicates that the remote device is in the process of
+ * stopping. In this state no new IO operations are permitted, but
+ * existing IO operations are allowed to complete.
+ * This state is entered from the READY state.
+ * This state is entered from the FAILED state.
+ */
+ SCI_BASE_REMOTE_DEVICE_STATE_STOPPING,
+
+ /**
+ * This state indicates that the remote device has failed.
+ * In this state no new IO operations are permitted.
+ * This state is entered from the INITIALIZING state.
+ * This state is entered from the READY state.
+ */
+ SCI_BASE_REMOTE_DEVICE_STATE_FAILED,
+
+ /**
+ * This state indicates the device is being reset.
+ * In this state no new IO operations are permitted.
+ * This state is entered from the READY state.
+ */
+ SCI_BASE_REMOTE_DEVICE_STATE_RESETTING,
+
+ /**
+ * Simply the final state for the base remote device state machine.
+ */
+ SCI_BASE_REMOTE_DEVICE_STATE_FINAL,
+};
+
+/**
+ * enum scic_sds_ssp_remote_device_ready_substates -
+ *
+ * This is the enumeration of the ready substates for the
+ * struct scic_sds_remote_device.
+ */
+enum scic_sds_ssp_remote_device_ready_substates {
+ /**
+ * This is the initial state for the remote device ready substate.
+ */
+ SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_INITIAL,
+
+ /**
+ * This is the ready operational substate for the remote device.
+ * This is the normal operational state for a remote device.
+ */
+ SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_OPERATIONAL,
+
+ /**
+ * This is the suspended state for the remote device. This is the state
+ * that the device is placed in when a RNC suspend is received by
+ * the SCU hardware.
+ */
+ SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_SUSPENDED,
+
+ /**
+ * This is the final state that the device is placed in before a change
+ * to the base state machine.
+ */
+ SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_FINAL,
+
+ SCIC_SDS_SSP_REMOTE_DEVICE_READY_MAX_SUBSTATES
+};
+
+/**
+ * enum scic_sds_stp_remote_device_ready_substates -
+ *
+ * This is the enumeration for the struct scic_sds_remote_device ready substates
+ * for the STP remote device.
+ */
+enum scic_sds_stp_remote_device_ready_substates {
+ /**
+ * This is the idle substate for the stp remote device. When there are no
+ * active IO for the device it is is in this state.
+ */
+ SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE,
+
+ /**
+ * This is the command state for for the STP remote device. This state is
+ * entered when the device is processing a non-NCQ command. The device object
+ * will fail any new start IO requests until this command is complete.
+ */
+ SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD,
+
+ /**
+ * This is the NCQ state for the STP remote device. This state is entered
+ * when the device is processing an NCQ reuqest. It will remain in this state
+ * so long as there is one or more NCQ requests being processed.
+ */
+ SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ,
+
+ /**
+ * This is the NCQ error state for the STP remote device. This state is
+ * entered when an SDB error FIS is received by the device object while in the
+ * NCQ state. The device object will only accept a READ LOG command while in
+ * this state.
+ */
+ SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR,
+
+#if !defined(DISABLE_ATAPI)
+ /**
+ * This is the ATAPI error state for the STP ATAPI remote device. This state is
+ * entered when ATAPI device sends error status FIS without data while the device
+ * object is in CMD state. A suspension event is expected in this state. The device
+ * object will resume right away.
+ */
+ SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR,
+#endif
+
+ /**
+ * This is the READY substate indicates the device is waiting for the RESET task
+ * coming to be recovered from certain hardware specific error.
+ */
+ SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET,
+};
+
+/**
+ * enum scic_sds_smp_remote_device_ready_substates -
+ *
+ * This is the enumeration of the ready substates for the SMP REMOTE DEVICE.
+ */
+enum scic_sds_smp_remote_device_ready_substates {
+ /**
+ * This is the ready operational substate for the remote device. This is the
+ * normal operational state for a remote device.
+ */
+ SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE,
+
+ /**
+ * This is the suspended state for the remote device. This is the state that
+ * the device is placed in when a RNC suspend is received by the SCU hardware.
+ */
+ SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD,
+};
+
+static inline struct scic_sds_remote_device *rnc_to_dev(struct scic_sds_remote_node_context *rnc)
+{
+ struct scic_sds_remote_device *sci_dev;
+
+ sci_dev = container_of(rnc, typeof(*sci_dev), rnc);
+
+ return sci_dev;
+}
+
+typedef enum sci_status (*scic_sds_remote_device_request_handler_t)(
+ struct scic_sds_remote_device *device,
+ struct scic_sds_request *request);
+
+typedef enum sci_status (*scic_sds_remote_device_high_priority_request_complete_handler_t)(
+ struct scic_sds_remote_device *device,
+ struct scic_sds_request *request,
+ void *,
+ enum sci_io_status);
+
+typedef enum sci_status (*scic_sds_remote_device_handler_t)(
+ struct scic_sds_remote_device *sci_dev);
+
+typedef enum sci_status (*scic_sds_remote_device_suspend_handler_t)(
+ struct scic_sds_remote_device *sci_dev,
+ u32 suspend_type);
+
+typedef enum sci_status (*scic_sds_remote_device_resume_handler_t)(
+ struct scic_sds_remote_device *sci_dev);
+
+typedef enum sci_status (*scic_sds_remote_device_frame_handler_t)(
+ struct scic_sds_remote_device *sci_dev,
+ u32 frame_index);
+
+typedef enum sci_status (*scic_sds_remote_device_event_handler_t)(
+ struct scic_sds_remote_device *sci_dev,
+ u32 event_code);
+
+typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)(
+ struct scic_sds_remote_device *sci_dev);
+
+/**
+ * struct scic_sds_remote_device_state_handler - This structure conains the
+ * state handlers that are needed to process requests for the SCU remote
+ * device objects.
+ *
+ *
+ */
+struct scic_sds_remote_device_state_handler {
+ /**
+ * The start_handler specifies the method invoked when a user
+ * attempts to start a remote device.
+ */
+ scic_sds_remote_device_handler_t start_handler;
+
+ /**
+ * The stop_handler specifies the method invoked when a user attempts to
+ * stop a remote device.
+ */
+ scic_sds_remote_device_handler_t stop_handler;
+
+ /**
+ * The fail_handler specifies the method invoked when a remote device
+ * failure has occurred. A failure may be due to an inability to
+ * initialize/configure the device.
+ */
+ scic_sds_remote_device_handler_t fail_handler;
+
+ /**
+ * The destruct_handler specifies the method invoked when attempting to
+ * destruct a remote device.
+ */
+ scic_sds_remote_device_handler_t destruct_handler;
+
+ /**
+ * The reset handler specifies the method invloked when requesting to
+ * reset a remote device.
+ */
+ scic_sds_remote_device_handler_t reset_handler;
+
+ /**
+ * The reset complete handler specifies the method invloked when
+ * reporting that a reset has completed to the remote device.
+ */
+ scic_sds_remote_device_handler_t reset_complete_handler;
+
+ /**
+ * The start_io_handler specifies the method invoked when a user
+ * attempts to start an IO request for a remote device.
+ */
+ scic_sds_remote_device_request_handler_t start_io_handler;
+
+ /**
+ * The complete_io_handler specifies the method invoked when a user
+ * attempts to complete an IO request for a remote device.
+ */
+ scic_sds_remote_device_request_handler_t complete_io_handler;
+
+ /**
+ * The continue_io_handler specifies the method invoked when a user
+ * attempts to continue an IO request for a remote device.
+ */
+ scic_sds_remote_device_request_handler_t continue_io_handler;
+
+ /**
+ * The start_task_handler specifies the method invoked when a user
+ * attempts to start a task management request for a remote device.
+ */
+ scic_sds_remote_device_request_handler_t start_task_handler;
+
+ /**
+ * The complete_task_handler specifies the method invoked when a user
+ * attempts to complete a task management request for a remote device.
+ */
+ scic_sds_remote_device_request_handler_t complete_task_handler;
+
+
+ scic_sds_remote_device_suspend_handler_t suspend_handler;
+ scic_sds_remote_device_resume_handler_t resume_handler;
+ scic_sds_remote_device_event_handler_t event_handler;
+ scic_sds_remote_device_frame_handler_t frame_handler;
+};
+
+extern const struct sci_base_state scic_sds_ssp_remote_device_ready_substate_table[];
+extern const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[];
+extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[];
+
+/**
+ * scic_sds_remote_device_increment_request_count() -
+ *
+ * This macro incrments the request count for this device
+ */
+#define scic_sds_remote_device_increment_request_count(sci_dev) \
+ ((sci_dev)->started_request_count++)
+
+/**
+ * scic_sds_remote_device_decrement_request_count() -
+ *
+ * This macro decrements the request count for this device. This count will
+ * never decrment past 0.
+ */
+#define scic_sds_remote_device_decrement_request_count(sci_dev) \
+ ((sci_dev)->started_request_count > 0 ? \
+ (sci_dev)->started_request_count-- : 0)
+
+/**
+ * scic_sds_remote_device_get_request_count() -
+ *
+ * This is a helper macro to return the current device request count.
+ */
+#define scic_sds_remote_device_get_request_count(sci_dev) \
+ ((sci_dev)->started_request_count)
+
+/**
+ * scic_sds_remote_device_get_port() -
+ *
+ * This macro returns the owning port of this remote device obejct.
+ */
+#define scic_sds_remote_device_get_port(sci_dev) \
+ ((sci_dev)->owning_port)
+
+/**
+ * scic_sds_remote_device_get_controller() -
+ *
+ * This macro returns the controller object that contains this device object
+ */
+#define scic_sds_remote_device_get_controller(sci_dev) \
+ scic_sds_port_get_controller(scic_sds_remote_device_get_port(sci_dev))
+
+/**
+ * scic_sds_remote_device_set_state_handlers() -
+ *
+ * This macro sets the remote device state handlers pointer and is set on entry
+ * to each device state.
+ */
+#define scic_sds_remote_device_set_state_handlers(sci_dev, handlers) \
+ ((sci_dev)->state_handlers = (handlers))
+
+/**
+ * scic_sds_remote_device_get_port() -
+ *
+ * This macro returns the owning port of this device
+ */
+#define scic_sds_remote_device_get_port(sci_dev) \
+ ((sci_dev)->owning_port)
+
+/**
+ * scic_sds_remote_device_get_sequence() -
+ *
+ * This macro returns the remote device sequence value
+ */
+#define scic_sds_remote_device_get_sequence(sci_dev) \
+ (\
+ scic_sds_remote_device_get_controller(sci_dev)-> \
+ remote_device_sequence[(sci_dev)->rnc.remote_node_index] \
+ )
+
+/**
+ * scic_sds_remote_device_get_controller_peg() -
+ *
+ * This macro returns the controllers protocol engine group
+ */
+#define scic_sds_remote_device_get_controller_peg(sci_dev) \
+ (\
+ scic_sds_controller_get_protocol_engine_group(\
+ scic_sds_port_get_controller(\
+ scic_sds_remote_device_get_port(sci_dev) \
+ ) \
+ ) \
+ )
+
+/**
+ * scic_sds_remote_device_get_port_index() -
+ *
+ * This macro returns the port index for the devices owning port
+ */
+#define scic_sds_remote_device_get_port_index(sci_dev) \
+ (scic_sds_port_get_index(scic_sds_remote_device_get_port(sci_dev)))
+
+/**
+ * scic_sds_remote_device_get_index() -
+ *
+ * This macro returns the remote node index for this device object
+ */
+#define scic_sds_remote_device_get_index(sci_dev) \
+ ((sci_dev)->rnc.remote_node_index)
+
+/**
+ * scic_sds_remote_device_build_command_context() -
+ *
+ * This macro builds a remote device context for the SCU post request operation
+ */
+#define scic_sds_remote_device_build_command_context(device, command) \
+ ((command) \
+ | (scic_sds_remote_device_get_controller_peg((device)) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) \
+ | (scic_sds_remote_device_get_port_index((device)) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) \
+ | (scic_sds_remote_device_get_index((device))) \
+ )
+
+/**
+ * scic_sds_remote_device_set_working_request() -
+ *
+ * This macro makes the working request assingment for the remote device
+ * object. To clear the working request use this macro with a NULL request
+ * object.
+ */
+#define scic_sds_remote_device_set_working_request(device, request) \
+ ((device)->working_request = (request))
+
+enum sci_status scic_sds_remote_device_frame_handler(
+ struct scic_sds_remote_device *sci_dev,
+ u32 frame_index);
+
+enum sci_status scic_sds_remote_device_event_handler(
+ struct scic_sds_remote_device *sci_dev,
+ u32 event_code);
+
+enum sci_status scic_sds_remote_device_start_io(
+ struct scic_sds_controller *controller,
+ struct scic_sds_remote_device *sci_dev,
+ struct scic_sds_request *io_request);
+
+enum sci_status scic_sds_remote_device_complete_io(
+ struct scic_sds_controller *controller,
+ struct scic_sds_remote_device *sci_dev,
+ struct scic_sds_request *io_request);
+
+enum sci_status scic_sds_remote_device_resume(
+ struct scic_sds_remote_device *sci_dev);
+
+enum sci_status scic_sds_remote_device_suspend(
+ struct scic_sds_remote_device *sci_dev,
+ u32 suspend_type);
+
+enum sci_status scic_sds_remote_device_start_task(
+ struct scic_sds_controller *controller,
+ struct scic_sds_remote_device *sci_dev,
+ struct scic_sds_request *io_request);
+
+void scic_sds_remote_device_post_request(
+ struct scic_sds_remote_device *sci_dev,
+ u32 request);
+
+#if !defined(DISABLE_ATAPI)
+bool scic_sds_remote_device_is_atapi(
+ struct scic_sds_remote_device *sci_dev);
+#else /* !defined(DISABLE_ATAPI) */
+#define scic_sds_remote_device_is_atapi(sci_dev) false
+#endif /* !defined(DISABLE_ATAPI) */
+
+void scic_sds_remote_device_start_request(
+ struct scic_sds_remote_device *sci_dev,
+ struct scic_sds_request *sci_req,
+ enum sci_status status);
+
+void scic_sds_remote_device_continue_request(void *sci_dev);
+
+enum sci_status scic_sds_remote_device_default_start_handler(
+ struct scic_sds_remote_device *sci_dev);
+
+enum sci_status scic_sds_remote_device_default_fail_handler(
+ struct scic_sds_remote_device *sci_dev);
+
+enum sci_status scic_sds_remote_device_default_destruct_handler(
+ struct scic_sds_remote_device *sci_dev);
+
+enum sci_status scic_sds_remote_device_default_reset_handler(
+ struct scic_sds_remote_device *device);
+
+enum sci_status scic_sds_remote_device_default_reset_complete_handler(
+ struct scic_sds_remote_device *device);
+
+enum sci_status scic_sds_remote_device_default_start_request_handler(
+ struct scic_sds_remote_device *device,
+ struct scic_sds_request *request);
+
+enum sci_status scic_sds_remote_device_default_complete_request_handler(
+ struct scic_sds_remote_device *device,
+ struct scic_sds_request *request);
+
+enum sci_status scic_sds_remote_device_default_continue_request_handler(
+ struct scic_sds_remote_device *device,
+ struct scic_sds_request *request);
+
+enum sci_status scic_sds_remote_device_default_suspend_handler(
+ struct scic_sds_remote_device *sci_dev,
+ u32 suspend_type);
+
+enum sci_status scic_sds_remote_device_default_resume_handler(
+ struct scic_sds_remote_device *sci_dev);
+
+
+enum sci_status scic_sds_remote_device_default_frame_handler(
+ struct scic_sds_remote_device *sci_dev,
+ u32 frame_index);
+
+enum sci_status scic_sds_remote_device_ready_state_stop_handler(
+ struct scic_sds_remote_device *device);
+
+enum sci_status scic_sds_remote_device_ready_state_reset_handler(
+ struct scic_sds_remote_device *device);
+
+enum sci_status scic_sds_remote_device_general_frame_handler(
+ struct scic_sds_remote_device *sci_dev,
+ u32 frame_index);
+
+enum sci_status scic_sds_remote_device_general_event_handler(
+ struct scic_sds_remote_device *sci_dev,
+ u32 event_code);
+
+enum sci_status scic_sds_ssp_remote_device_ready_suspended_substate_resume_handler(
+ struct scic_sds_remote_device *sci_dev);
+
+
#endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */
diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.c b/drivers/scsi/isci/remote_node_context.c
similarity index 99%
rename from drivers/scsi/isci/core/scic_sds_remote_node_context.c
rename to drivers/scsi/isci/remote_node_context.c
index e1d58f88..bdf0b51 100644
--- a/drivers/scsi/isci/core/scic_sds_remote_node_context.c
+++ b/drivers/scsi/isci/remote_node_context.c
@@ -54,11 +54,10 @@
*/
#include "sci_base_state_machine.h"
-#include "scic_remote_device.h"
#include "scic_sds_controller.h"
#include "scic_sds_port.h"
-#include "scic_sds_remote_device.h"
-#include "scic_sds_remote_node_context.h"
+#include "remote_device.h"
+#include "remote_node_context.h"
#include "sci_environment.h"
#include "sci_util.h"
#include "scu_event_codes.h"
diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
similarity index 100%
rename from drivers/scsi/isci/core/scic_sds_remote_node_context.h
rename to drivers/scsi/isci/remote_node_context.h
diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_table.c b/drivers/scsi/isci/remote_node_table.c
similarity index 99%
rename from drivers/scsi/isci/core/scic_sds_remote_node_table.c
rename to drivers/scsi/isci/remote_node_table.c
index 77919a2..8886146 100644
--- a/drivers/scsi/isci/core/scic_sds_remote_node_table.c
+++ b/drivers/scsi/isci/remote_node_table.c
@@ -61,8 +61,8 @@
*/
#include "sci_util.h"
#include "sci_environment.h"
-#include "scic_sds_remote_node_table.h"
-#include "scic_sds_remote_node_context.h"
+#include "remote_node_table.h"
+#include "remote_node_context.h"
/**
*
diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_table.h b/drivers/scsi/isci/remote_node_table.h
similarity index 100%
rename from drivers/scsi/isci/core/scic_sds_remote_node_table.h
rename to drivers/scsi/isci/remote_node_table.h
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index 8d2125b..ff5c05a 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -54,7 +54,6 @@
*/
#include "isci.h"
-#include "scic_remote_device.h"
#include "scic_io_request.h"
#include "scic_task_request.h"
#include "scic_port.h"
diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c
index c941d909..53ce0c2 100644
--- a/drivers/scsi/isci/sata.c
+++ b/drivers/scsi/isci/sata.c
@@ -54,8 +54,7 @@
*/
#include "isci.h"
-#include "scic_remote_device.h"
-#include "scic_sds_remote_device.h"
+#include "remote_device.h"
#include "scic_io_request.h"
#include "scic_task_request.h"
#include "task.h"
diff --git a/drivers/scsi/isci/core/scu_remote_node_context.h b/drivers/scsi/isci/scu_remote_node_context.h
similarity index 100%
rename from drivers/scsi/isci/core/scu_remote_node_context.h
rename to drivers/scsi/isci/scu_remote_node_context.h
diff --git a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c b/drivers/scsi/isci/smp_remote_device.c
similarity index 98%
rename from drivers/scsi/isci/core/scic_sds_smp_remote_device.c
rename to drivers/scsi/isci/smp_remote_device.c
index cd55c0a..718ddaf 100644
--- a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c
+++ b/drivers/scsi/isci/smp_remote_device.c
@@ -53,10 +53,9 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include "scic_remote_device.h"
#include "scic_sds_controller.h"
#include "scic_sds_port.h"
-#include "scic_sds_remote_device.h"
+#include "remote_device.h"
#include "scic_sds_request.h"
#include "sci_environment.h"
#include "sci_util.h"
diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/stp_remote_device.c
similarity index 99%
rename from drivers/scsi/isci/core/scic_sds_stp_remote_device.c
rename to drivers/scsi/isci/stp_remote_device.c
index 848cb471..b81f21f 100644
--- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c
+++ b/drivers/scsi/isci/stp_remote_device.c
@@ -57,10 +57,9 @@
#include "intel_sata.h"
#include "intel_sat.h"
#include "sci_base_state.h"
-#include "scic_remote_device.h"
#include "scic_sds_controller.h"
#include "scic_sds_port.h"
-#include "scic_sds_remote_device.h"
+#include "remote_device.h"
#include "scic_sds_request.h"
#include "sci_environment.h"
#include "sci_util.h"
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index f54f523..e011d66 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -56,10 +56,9 @@
#include <linux/completion.h>
#include <linux/irqflags.h>
#include "scic_task_request.h"
-#include "scic_remote_device.h"
#include "scic_io_request.h"
-#include "scic_sds_remote_device.h"
-#include "scic_sds_remote_node_context.h"
+#include "remote_device.h"
+#include "remote_node_context.h"
#include "isci.h"
#include "request.h"
#include "sata.h"