Add missing newlines to some uses of dev_<level> messages
Found these while looking at printk uses.
Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk
Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 9fe0517..7495a9e 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -900,7 +900,7 @@
ax->map2 = ioremap(res->start, size);
if (ax->map2 == NULL) {
- dev_err(&pdev->dev, "cannot map reset register");
+ dev_err(&pdev->dev, "cannot map reset register\n");
ret = -ENXIO;
goto exit_mem2;
}
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 78ed633..fa0d69a 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -6428,7 +6428,7 @@
/* enable device (incl. PCI PM wakeup), and bus-mastering */
rc = pci_enable_device(pdev);
if (rc) {
- dev_err(&pdev->dev, "Cannot enable PCI device, aborting.");
+ dev_err(&pdev->dev, "Cannot enable PCI device, aborting.\n");
goto err_out;
}
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index fe5ffac..2809c99 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -3218,7 +3218,7 @@
/* get adapter properties */
ret = ehea_sense_adapter_attr(adapter);
if (ret) {
- dev_err(&dev->dev, "sense_adapter_attr failed: %d", ret);
+ dev_err(&dev->dev, "sense_adapter_attr failed: %d\n", ret);
goto out_free_ad;
}
@@ -3226,7 +3226,7 @@
EHEA_NEQ, EHEA_MAX_ENTRIES_EQ, 1);
if (!adapter->neq) {
ret = -EIO;
- dev_err(&dev->dev, "NEQ creation failed");
+ dev_err(&dev->dev, "NEQ creation failed\n");
goto out_free_ad;
}
@@ -3237,7 +3237,7 @@
ehea_interrupt_neq, IRQF_DISABLED,
"ehea_neq", adapter);
if (ret) {
- dev_err(&dev->dev, "requesting NEQ IRQ failed");
+ dev_err(&dev->dev, "requesting NEQ IRQ failed\n");
goto out_kill_eq;
}
@@ -3247,7 +3247,7 @@
ret = ehea_setup_ports(adapter);
if (ret) {
- dev_err(&dev->dev, "setup_ports failed");
+ dev_err(&dev->dev, "setup_ports failed\n");
goto out_rem_dev_sysfs;
}
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 64c8151..366e62a 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -3058,7 +3058,8 @@
if (status != 0) {
dac_enabled = 0;
dev_err(&pdev->dev,
- "64-bit pci address mask was refused, trying 32-bit");
+ "64-bit pci address mask was refused, "
+ "trying 32-bit\n");
status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
}
if (status != 0) {
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 7967240..70d7e47 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3961,7 +3961,7 @@
struct net_device *dev = alloc_etherdev(sizeof(*sky2));
if (!dev) {
- dev_err(&hw->pdev->dev, "etherdev alloc failed");
+ dev_err(&hw->pdev->dev, "etherdev alloc failed\n");
return NULL;
}
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 6240b97..f55a595 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -114,8 +114,8 @@
struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
if (urb->status < 0)
- printk(KERN_DEBUG "mcs7830_async_cmd_callback() failed with %d",
- urb->status);
+ printk(KERN_DEBUG "%s() failed with %d\n",
+ __FUNCTION__, urb->status);
kfree(req);
usb_free_urb(urb);
@@ -129,15 +129,15 @@
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
- dev_dbg(&dev->udev->dev, "Error allocating URB "
- "in write_cmd_async!");
+ dev_dbg(&dev->udev->dev,
+ "Error allocating URB in write_cmd_async!\n");
return;
}
req = kmalloc(sizeof *req, GFP_ATOMIC);
if (!req) {
- dev_err(&dev->udev->dev, "Failed to allocate memory for "
- "control request");
+ dev_err(&dev->udev->dev,
+ "Failed to allocate memory for control request\n");
goto out;
}
req->bRequestType = MCS7830_WR_BMREQ;
@@ -153,8 +153,8 @@
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret < 0) {
- dev_err(&dev->udev->dev, "Error submitting the control "
- "message: ret=%d", ret);
+ dev_err(&dev->udev->dev,
+ "Error submitting the control message: ret=%d\n", ret);
goto out;
}
return;
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 7fd505c..2a8fc43 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1526,7 +1526,7 @@
if (!feature_rx_copy) {
dev_info(&dev->dev,
- "backend does not support copying recieve path");
+ "backend does not support copying receive path\n");
return -ENODEV;
}