Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
diff --git a/MAINTAINERS b/MAINTAINERS
index bf61e04..6447bec 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1406,7 +1406,7 @@
M: Kalle Valo <kvalo@qca.qualcomm.com>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/ath6kl
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath6kl.git
+T: git git://github.com/kvalo/ath.git
S: Supported
F: drivers/net/wireless/ath/ath6kl/
@@ -6719,6 +6719,14 @@
S: Maintained
F: drivers/media/tuners/qt1010*
+QUALCOMM ATHEROS ATH10K WIRELESS DRIVER
+M: Kalle Valo <kvalo@qca.qualcomm.com>
+L: ath10k@lists.infradead.org
+W: http://wireless.kernel.org/en/users/Drivers/ath10k
+T: git git://github.com/kvalo/ath.git
+S: Supported
+F: drivers/net/wireless/ath/ath10k/
+
QUALCOMM HEXAGON ARCHITECTURE
M: Richard Kuo <rkuo@codeaurora.org>
L: linux-hexagon@vger.kernel.org
@@ -8264,7 +8272,7 @@
F: sound/soc/codecs/twl4030*
TI WILINK WIRELESS DRIVERS
-M: Luciano Coelho <coelho@ti.com>
+M: Luciano Coelho <luca@coelho.fi>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/wl12xx
W: http://wireless.kernel.org/en/users/Drivers/wl1251
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 11f467c..a12b923 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -91,6 +91,10 @@
{ USB_DEVICE(0x0489, 0xe04e) },
{ USB_DEVICE(0x0489, 0xe056) },
{ USB_DEVICE(0x0489, 0xe04d) },
+ { USB_DEVICE(0x04c5, 0x1330) },
+ { USB_DEVICE(0x13d3, 0x3402) },
+ { USB_DEVICE(0x0cf3, 0x3121) },
+ { USB_DEVICE(0x0cf3, 0xe003) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -128,6 +132,10 @@
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
@@ -193,24 +201,44 @@
static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
{
- int pipe = 0;
+ int ret, pipe = 0;
+ char *buf;
+
+ buf = kmalloc(sizeof(*buf), GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
pipe = usb_rcvctrlpipe(udev, 0);
- return usb_control_msg(udev, pipe, ATH3K_GETSTATE,
- USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
- state, 0x01, USB_CTRL_SET_TIMEOUT);
+ ret = usb_control_msg(udev, pipe, ATH3K_GETSTATE,
+ USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+ buf, sizeof(*buf), USB_CTRL_SET_TIMEOUT);
+
+ *state = *buf;
+ kfree(buf);
+
+ return ret;
}
static int ath3k_get_version(struct usb_device *udev,
struct ath3k_version *version)
{
- int pipe = 0;
+ int ret, pipe = 0;
+ struct ath3k_version *buf;
+ const int size = sizeof(*buf);
+
+ buf = kmalloc(size, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
pipe = usb_rcvctrlpipe(udev, 0);
- return usb_control_msg(udev, pipe, ATH3K_GETVERSION,
- USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, version,
- sizeof(struct ath3k_version),
- USB_CTRL_SET_TIMEOUT);
+ ret = usb_control_msg(udev, pipe, ATH3K_GETVERSION,
+ USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+ buf, size, USB_CTRL_SET_TIMEOUT);
+
+ memcpy(version, buf, size);
+ kfree(buf);
+
+ return ret;
}
static int ath3k_load_fwfile(struct usb_device *udev,
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index de4cf4d..8e16f0a 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -154,6 +154,10 @@
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@@ -1095,7 +1099,7 @@
if (IS_ERR(skb)) {
BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
hdev->name, cmd->opcode, PTR_ERR(skb));
- return -PTR_ERR(skb);
+ return PTR_ERR(skb);
}
/* It ensures that the returned event matches the event data read from
@@ -1147,7 +1151,7 @@
if (IS_ERR(skb)) {
BT_ERR("%s sending initial HCI reset command failed (%ld)",
hdev->name, PTR_ERR(skb));
- return -PTR_ERR(skb);
+ return PTR_ERR(skb);
}
kfree_skb(skb);
@@ -1161,7 +1165,7 @@
if (IS_ERR(skb)) {
BT_ERR("%s reading Intel fw version command failed (%ld)",
hdev->name, PTR_ERR(skb));
- return -PTR_ERR(skb);
+ return PTR_ERR(skb);
}
if (skb->len != sizeof(*ver)) {
@@ -1219,7 +1223,7 @@
BT_ERR("%s entering Intel manufacturer mode failed (%ld)",
hdev->name, PTR_ERR(skb));
release_firmware(fw);
- return -PTR_ERR(skb);
+ return PTR_ERR(skb);
}
if (skb->data[0]) {
@@ -1276,7 +1280,7 @@
if (IS_ERR(skb)) {
BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
hdev->name, PTR_ERR(skb));
- return -PTR_ERR(skb);
+ return PTR_ERR(skb);
}
kfree_skb(skb);
@@ -1292,7 +1296,7 @@
if (IS_ERR(skb)) {
BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
hdev->name, PTR_ERR(skb));
- return -PTR_ERR(skb);
+ return PTR_ERR(skb);
}
kfree_skb(skb);
@@ -1310,7 +1314,7 @@
if (IS_ERR(skb)) {
BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
hdev->name, PTR_ERR(skb));
- return -PTR_ERR(skb);
+ return PTR_ERR(skb);
}
kfree_skb(skb);
diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
index cde58fe..82e8088 100644
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -1,6 +1,6 @@
config ATH10K
tristate "Atheros 802.11ac wireless cards support"
- depends on MAC80211
+ depends on MAC80211 && HAS_DMA
select ATH_COMMON
---help---
This module adds support for wireless adapters based on
diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
index 81b686c..40825d4 100644
--- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c
+++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
@@ -325,7 +325,7 @@
struct netdev_hw_addr *ha;
mfilt[0] = 0;
- mfilt[1] = 1;
+ mfilt[1] = 0;
netdev_hw_addr_list_for_each(ha, mc_list) {
/* calculate XOR of eight 6-bit values */
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index d1acfe9..1576d58 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -610,7 +610,15 @@
REG_SET_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
if (AR_SREV_9280_20_OR_LATER(ah)) {
- val = REG_READ(ah, AR_PCU_MISC_MODE2);
+ /*
+ * For AR9280 and above, there is a new feature that allows
+ * Multicast search based on both MAC Address and Key ID.
+ * By default, this feature is enabled. But since the driver
+ * is not using this feature, we switch it off; otherwise
+ * multicast search based on MAC addr only will fail.
+ */
+ val = REG_READ(ah, AR_PCU_MISC_MODE2) &
+ (~AR_ADHOC_MCAST_KEYID_ENABLE);
if (!AR_SREV_9271(ah))
val &= ~AR_PCU_MISC_MODE2_HWWAR1;
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 9e582e1..5205a36 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -1082,7 +1082,7 @@
struct device *dev = &hif_dev->udev->dev;
struct device *parent = dev->parent;
- complete(&hif_dev->fw_done);
+ complete_all(&hif_dev->fw_done);
if (parent)
device_lock(parent);
@@ -1131,7 +1131,7 @@
release_firmware(fw);
hif_dev->flags |= HIF_USB_READY;
- complete(&hif_dev->fw_done);
+ complete_all(&hif_dev->fw_done);
return;
@@ -1295,7 +1295,9 @@
usb_set_intfdata(interface, NULL);
- if (!unplugged && (hif_dev->flags & HIF_USB_START))
+ /* If firmware was loaded we should drop it
+ * go back to first stage bootloader. */
+ if (!unplugged && (hif_dev->flags & HIF_USB_READY))
ath9k_hif_usb_reboot(udev);
kfree(hif_dev);
@@ -1316,7 +1318,10 @@
if (!(hif_dev->flags & HIF_USB_START))
ath9k_htc_suspend(hif_dev->htc_handle);
- ath9k_hif_usb_dealloc_urbs(hif_dev);
+ wait_for_completion(&hif_dev->fw_done);
+
+ if (hif_dev->flags & HIF_USB_READY)
+ ath9k_hif_usb_dealloc_urbs(hif_dev);
return 0;
}
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 71a183f..c3676bf 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -861,6 +861,7 @@
if (error != 0)
goto err_rx;
+ ath9k_hw_disable(priv->ah);
#ifdef CONFIG_MAC80211_LEDS
/* must be initialized before ieee80211_register_hw */
priv->led_cdev.default_trigger = ieee80211_create_tpt_led_trigger(priv->hw,
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index c59ae43..9279927 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -146,6 +146,28 @@
ARRAY_SIZE(bf->rates));
}
+static void ath_txq_skb_done(struct ath_softc *sc, struct ath_txq *txq,
+ struct sk_buff *skb)
+{
+ int q;
+
+ q = skb_get_queue_mapping(skb);
+ if (txq == sc->tx.uapsdq)
+ txq = sc->tx.txq_map[q];
+
+ if (txq != sc->tx.txq_map[q])
+ return;
+
+ if (WARN_ON(--txq->pending_frames < 0))
+ txq->pending_frames = 0;
+
+ if (txq->stopped &&
+ txq->pending_frames < sc->tx.txq_max_pending[q]) {
+ ieee80211_wake_queue(sc->hw, q);
+ txq->stopped = false;
+ }
+}
+
static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
{
struct ath_txq *txq = tid->ac->txq;
@@ -167,6 +189,7 @@
if (!bf) {
bf = ath_tx_setup_buffer(sc, txq, tid, skb);
if (!bf) {
+ ath_txq_skb_done(sc, txq, skb);
ieee80211_free_txskb(sc->hw, skb);
continue;
}
@@ -811,6 +834,7 @@
if (!bf) {
__skb_unlink(skb, &tid->buf_q);
+ ath_txq_skb_done(sc, txq, skb);
ieee80211_free_txskb(sc->hw, skb);
continue;
}
@@ -1824,6 +1848,7 @@
bf = ath_tx_setup_buffer(sc, txq, tid, skb);
if (!bf) {
+ ath_txq_skb_done(sc, txq, skb);
ieee80211_free_txskb(sc->hw, skb);
return;
}
@@ -2090,6 +2115,7 @@
bf = ath_tx_setup_buffer(sc, txq, tid, skb);
if (!bf) {
+ ath_txq_skb_done(sc, txq, skb);
if (txctl->paprd)
dev_kfree_skb_any(skb);
else
@@ -2189,7 +2215,7 @@
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data;
- int q, padpos, padsize;
+ int padpos, padsize;
unsigned long flags;
ath_dbg(common, XMIT, "TX complete: skb: %p\n", skb);
@@ -2225,21 +2251,7 @@
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
__skb_queue_tail(&txq->complete_q, skb);
-
- q = skb_get_queue_mapping(skb);
- if (txq == sc->tx.uapsdq)
- txq = sc->tx.txq_map[q];
-
- if (txq == sc->tx.txq_map[q]) {
- if (WARN_ON(--txq->pending_frames < 0))
- txq->pending_frames = 0;
-
- if (txq->stopped &&
- txq->pending_frames < sc->tx.txq_max_pending[q]) {
- ieee80211_wake_queue(sc->hw, q);
- txq->stopped = false;
- }
- }
+ ath_txq_skb_done(sc, txq, skb);
}
static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,
diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index e8308ec..ab63676 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -145,7 +145,7 @@
le16_to_cpu(hdr.type), hdr.flags);
if (len <= MAX_MBOXITEM_SIZE) {
int n = 0;
- unsigned char printbuf[16 * 3 + 2];
+ char printbuf[16 * 3 + 2];
unsigned char databuf[MAX_MBOXITEM_SIZE];
void __iomem *src = wmi_buffer(wil, d.addr) +
sizeof(struct wil6210_mbox_hdr);
@@ -416,7 +416,7 @@
seq_printf(s, " SKB = %p\n", skb);
if (skb) {
- unsigned char printbuf[16 * 3 + 2];
+ char printbuf[16 * 3 + 2];
int i = 0;
int len = le16_to_cpu(d->dma.length);
void *p = skb->data;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
index 8e89755..8009901 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
@@ -242,7 +242,7 @@
{
unsigned long flags;
- if (!ifp)
+ if (!ifp || !ifp->ndev)
return;
brcmf_dbg(TRACE, "enter: idx=%d stop=0x%X reason=%d state=%d\n",
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index f0d9f7f..29b1f24 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -1744,13 +1744,14 @@
ulong flags;
int fifo = BRCMF_FWS_FIFO_BCMC;
bool multicast = is_multicast_ether_addr(eh->h_dest);
+ bool pae = eh->h_proto == htons(ETH_P_PAE);
/* determine the priority */
if (!skb->priority)
skb->priority = cfg80211_classify8021d(skb);
drvr->tx_multicast += !!multicast;
- if (ntohs(eh->h_proto) == ETH_P_PAE)
+ if (pae)
atomic_inc(&ifp->pend_8021x_cnt);
if (!brcmf_fws_fc_active(fws)) {
@@ -1781,6 +1782,11 @@
brcmf_fws_schedule_deq(fws);
} else {
brcmf_err("drop skb: no hanger slot\n");
+ if (pae) {
+ atomic_dec(&ifp->pend_8021x_cnt);
+ if (waitqueue_active(&ifp->pend_8021x_wait))
+ wake_up(&ifp->pend_8021x_wait);
+ }
brcmu_pkt_buf_free_skb(skb);
}
brcmf_fws_unlock(drvr, flags);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 277b37a..7fa71f7 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -1093,8 +1093,11 @@
brcmf_dbg(INFO, "Call WLC_DISASSOC to stop excess roaming\n ");
err = brcmf_fil_cmd_data_set(vif->ifp,
BRCMF_C_DISASSOC, NULL, 0);
- if (err)
+ if (err) {
brcmf_err("WLC_DISASSOC failed (%d)\n", err);
+ cfg80211_disconnected(vif->wdev.netdev, 0,
+ NULL, 0, GFP_KERNEL);
+ }
clear_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state);
}
clear_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state);
diff --git a/drivers/net/wireless/cw1200/sta.c b/drivers/net/wireless/cw1200/sta.c
index 7365674..010b252 100644
--- a/drivers/net/wireless/cw1200/sta.c
+++ b/drivers/net/wireless/cw1200/sta.c
@@ -1406,11 +1406,8 @@
if (!priv->join_status)
goto done;
- if (priv->join_status > CW1200_JOIN_STATUS_IBSS) {
- wiphy_err(priv->hw->wiphy, "Unexpected: join status: %d\n",
- priv->join_status);
- BUG_ON(1);
- }
+ if (priv->join_status == CW1200_JOIN_STATUS_AP)
+ goto done;
cancel_work_sync(&priv->update_filtering_work);
cancel_work_sync(&priv->set_beacon_wakeup_period_work);
diff --git a/drivers/net/wireless/cw1200/txrx.c b/drivers/net/wireless/cw1200/txrx.c
index 5862c37..e824d4d 100644
--- a/drivers/net/wireless/cw1200/txrx.c
+++ b/drivers/net/wireless/cw1200/txrx.c
@@ -1165,7 +1165,7 @@
if (cw1200_handle_action_rx(priv, skb))
return;
} else if (ieee80211_is_beacon(frame->frame_control) &&
- !arg->status &&
+ !arg->status && priv->vif &&
!memcmp(ieee80211_get_SA(frame), priv->vif->bss_conf.bssid,
ETH_ALEN)) {
const u8 *tim_ie;
diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c
index ac07473..e509030 100644
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -523,9 +523,9 @@
data->length = prism2_ap_get_sta_qual(local, addr, qual, IW_MAX_AP, 1);
- memcpy(extra, &addr, sizeof(struct sockaddr) * data->length);
+ memcpy(extra, addr, sizeof(struct sockaddr) * data->length);
data->flags = 1; /* has quality information */
- memcpy(extra + sizeof(struct sockaddr) * data->length, &qual,
+ memcpy(extra + sizeof(struct sockaddr) * data->length, qual,
sizeof(struct iw_quality) * data->length);
kfree(addr);
diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c
index b9b2bb5..f2ed62e 100644
--- a/drivers/net/wireless/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/iwlegacy/4965-mac.c
@@ -4460,12 +4460,12 @@
* is killed. Hence update the killswitch state here. The
* rfkill handler will care about restarting if needed.
*/
- if (!test_bit(S_ALIVE, &il->status)) {
- if (hw_rf_kill)
- set_bit(S_RFKILL, &il->status);
- else
- clear_bit(S_RFKILL, &il->status);
+ if (hw_rf_kill) {
+ set_bit(S_RFKILL, &il->status);
+ } else {
+ clear_bit(S_RFKILL, &il->status);
wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill);
+ il_force_reset(il, true);
}
handled |= CSR_INT_BIT_RF_KILL;
@@ -5334,6 +5334,9 @@
il->active_rate = RATES_MASK;
+ il_power_update_mode(il, true);
+ D_INFO("Updated power mode\n");
+
if (il_is_associated(il)) {
struct il_rxon_cmd *active_rxon =
(struct il_rxon_cmd *)&il->active;
@@ -5364,9 +5367,6 @@
D_INFO("ALIVE processing complete.\n");
wake_up(&il->wait_command_queue);
- il_power_update_mode(il, true);
- D_INFO("Updated power mode\n");
-
return;
restart:
diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c
index 3195aad..b03e22e 100644
--- a/drivers/net/wireless/iwlegacy/common.c
+++ b/drivers/net/wireless/iwlegacy/common.c
@@ -4660,6 +4660,7 @@
return 0;
}
+EXPORT_SYMBOL(il_force_reset);
int
il_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
index 822f1a0..3193872 100644
--- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
@@ -1068,7 +1068,10 @@
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
- if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+ if (!test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+ return;
+
+ if (ctx->vif)
ieee80211_chswitch_done(ctx->vif, is_success);
}
diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c
index 3952ddf..1531a4f 100644
--- a/drivers/net/wireless/iwlwifi/dvm/main.c
+++ b/drivers/net/wireless/iwlwifi/dvm/main.c
@@ -758,7 +758,7 @@
BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
if (ret)
return ret;
- } else {
+ } else if (priv->lib->bt_params) {
/*
* default is 2-wire BT coexexistence support
*/
diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c
index 7e5e5c2..83da884 100644
--- a/drivers/net/wireless/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/iwlwifi/mvm/d3.c
@@ -134,7 +134,7 @@
struct iwl_wowlan_rsc_tsc_params_cmd *rsc_tsc;
struct iwl_wowlan_tkip_params_cmd *tkip;
bool error, use_rsc_tsc, use_tkip;
- int gtk_key_idx;
+ int wep_key_idx;
};
static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw,
@@ -188,8 +188,8 @@
wkc.wep_key.key_offset = 0;
} else {
/* others start at 1 */
- data->gtk_key_idx++;
- wkc.wep_key.key_offset = data->gtk_key_idx;
+ data->wep_key_idx++;
+ wkc.wep_key.key_offset = data->wep_key_idx;
}
ret = iwl_mvm_send_cmd_pdu(mvm, WEP_KEY, CMD_SYNC,
@@ -316,8 +316,13 @@
mvm->ptk_ivlen = key->iv_len;
mvm->ptk_icvlen = key->icv_len;
} else {
- data->gtk_key_idx++;
- key->hw_key_idx = data->gtk_key_idx;
+ /*
+ * firmware only supports TSC/RSC for a single key,
+ * so if there are multiple keep overwriting them
+ * with new ones -- this relies on mac80211 doing
+ * list_add_tail().
+ */
+ key->hw_key_idx = 1;
mvm->gtk_ivlen = key->iv_len;
mvm->gtk_icvlen = key->icv_len;
}
diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
index e56ed2a..c24a744 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c
@@ -988,7 +988,11 @@
struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
char buf[100];
- if (!dbgfs_dir)
+ /*
+ * Check if debugfs directory already exist before creating it.
+ * This may happen when, for example, resetting hw or suspend-resume
+ */
+ if (!dbgfs_dir || mvmvif->dbgfs_dir)
return;
mvmvif->dbgfs_dir = debugfs_create_dir("iwlmvm", dbgfs_dir);
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
index b60d141..365095a 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
@@ -69,7 +69,6 @@
/* Scan Commands, Responses, Notifications */
/* Masks for iwl_scan_channel.type flags */
-#define SCAN_CHANNEL_TYPE_PASSIVE 0
#define SCAN_CHANNEL_TYPE_ACTIVE BIT(0)
#define SCAN_CHANNEL_NARROW_BAND BIT(22)
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index e08683b..f19baf0 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -257,7 +257,11 @@
if (ret)
return ret;
- return ieee80211_register_hw(mvm->hw);
+ ret = ieee80211_register_hw(mvm->hw);
+ if (ret)
+ iwl_mvm_leds_exit(mvm);
+
+ return ret;
}
static void iwl_mvm_mac_tx(struct ieee80211_hw *hw,
@@ -385,6 +389,7 @@
ieee80211_wake_queues(mvm->hw);
mvm->vif_count = 0;
+ mvm->rx_ba_sessions = 0;
}
static int iwl_mvm_mac_start(struct ieee80211_hw *hw)
@@ -507,6 +512,27 @@
goto out_unlock;
/*
+ * TODO: remove this temporary code.
+ * Currently MVM FW supports power management only on single MAC.
+ * If new interface added, disable PM on existing interface.
+ * P2P device is a special case, since it is handled by FW similary to
+ * scan. If P2P deviced is added, PM remains enabled on existing
+ * interface.
+ * Note: the method below does not count the new interface being added
+ * at this moment.
+ */
+ if (vif->type != NL80211_IFTYPE_P2P_DEVICE)
+ mvm->vif_count++;
+ if (mvm->vif_count > 1) {
+ IWL_DEBUG_MAC80211(mvm,
+ "Disable power on existing interfaces\n");
+ ieee80211_iterate_active_interfaces_atomic(
+ mvm->hw,
+ IEEE80211_IFACE_ITER_NORMAL,
+ iwl_mvm_pm_disable_iterator, mvm);
+ }
+
+ /*
* The AP binding flow can be done only after the beacon
* template is configured (which happens only in the mac80211
* start_ap() flow), and adding the broadcast station can happen
@@ -529,27 +555,6 @@
goto out_unlock;
}
- /*
- * TODO: remove this temporary code.
- * Currently MVM FW supports power management only on single MAC.
- * If new interface added, disable PM on existing interface.
- * P2P device is a special case, since it is handled by FW similary to
- * scan. If P2P deviced is added, PM remains enabled on existing
- * interface.
- * Note: the method below does not count the new interface being added
- * at this moment.
- */
- if (vif->type != NL80211_IFTYPE_P2P_DEVICE)
- mvm->vif_count++;
- if (mvm->vif_count > 1) {
- IWL_DEBUG_MAC80211(mvm,
- "Disable power on existing interfaces\n");
- ieee80211_iterate_active_interfaces_atomic(
- mvm->hw,
- IEEE80211_IFACE_ITER_NORMAL,
- iwl_mvm_pm_disable_iterator, mvm);
- }
-
ret = iwl_mvm_mac_ctxt_add(mvm, vif);
if (ret)
goto out_release;
@@ -1006,6 +1011,21 @@
mutex_lock(&mvm->mutex);
if (old_state == IEEE80211_STA_NOTEXIST &&
new_state == IEEE80211_STA_NONE) {
+ /*
+ * Firmware bug - it'll crash if the beacon interval is less
+ * than 16. We can't avoid connecting at all, so refuse the
+ * station state change, this will cause mac80211 to abandon
+ * attempts to connect to this AP, and eventually wpa_s will
+ * blacklist the AP...
+ */
+ if (vif->type == NL80211_IFTYPE_STATION &&
+ vif->bss_conf.beacon_int < 16) {
+ IWL_ERR(mvm,
+ "AP %pM beacon interval is %d, refusing due to firmware bug!\n",
+ sta->addr, vif->bss_conf.beacon_int);
+ ret = -EINVAL;
+ goto out_unlock;
+ }
ret = iwl_mvm_add_sta(mvm, vif, sta);
} else if (old_state == IEEE80211_STA_NONE &&
new_state == IEEE80211_STA_AUTH) {
@@ -1038,6 +1058,7 @@
} else {
ret = -EIO;
}
+ out_unlock:
mutex_unlock(&mvm->mutex);
return ret;
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index d40d7db..420e82d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -419,6 +419,7 @@
struct work_struct sta_drained_wk;
unsigned long sta_drained[BITS_TO_LONGS(IWL_MVM_STATION_COUNT)];
atomic_t pending_frames[IWL_MVM_STATION_COUNT];
+ u8 rx_ba_sessions;
/* configured by mac80211 */
u32 rts_threshold;
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 2157b0f..acdff6b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -137,8 +137,8 @@
{
int fw_idx, req_idx;
- fw_idx = 0;
- for (req_idx = req->n_ssids - 1; req_idx > 0; req_idx--) {
+ for (req_idx = req->n_ssids - 1, fw_idx = 0; req_idx > 0;
+ req_idx--, fw_idx++) {
cmd->direct_scan[fw_idx].id = WLAN_EID_SSID;
cmd->direct_scan[fw_idx].len = req->ssids[req_idx].ssid_len;
memcpy(cmd->direct_scan[fw_idx].ssid,
@@ -153,7 +153,9 @@
* just to notify that this scan is active and not passive.
* In order to notify the FW of the number of SSIDs we wish to scan (including
* the zero-length one), we need to set the corresponding bits in chan->type,
- * one for each SSID, and set the active bit (first).
+ * one for each SSID, and set the active bit (first). The first SSID is already
+ * included in the probe template, so we need to set only req->n_ssids - 1 bits
+ * in addition to the first bit.
*/
static u16 iwl_mvm_get_active_dwell(enum ieee80211_band band, int n_ssids)
{
@@ -176,19 +178,12 @@
struct iwl_scan_channel *chan = (struct iwl_scan_channel *)
(cmd->data + le16_to_cpu(cmd->tx_cmd.len));
int i;
- __le32 chan_type_value;
-
- if (req->n_ssids > 0)
- chan_type_value = cpu_to_le32(BIT(req->n_ssids + 1) - 1);
- else
- chan_type_value = SCAN_CHANNEL_TYPE_PASSIVE;
for (i = 0; i < cmd->channel_count; i++) {
chan->channel = cpu_to_le16(req->channels[i]->hw_value);
+ chan->type = cpu_to_le32(BIT(req->n_ssids) - 1);
if (req->channels[i]->flags & IEEE80211_CHAN_PASSIVE_SCAN)
- chan->type = SCAN_CHANNEL_TYPE_PASSIVE;
- else
- chan->type = chan_type_value;
+ chan->type &= cpu_to_le32(~SCAN_CHANNEL_TYPE_ACTIVE);
chan->active_dwell = cpu_to_le16(active_dwell);
chan->passive_dwell = cpu_to_le16(passive_dwell);
chan->iteration_count = cpu_to_le16(1);
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c
index 62fe520..563f559 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.c
@@ -608,6 +608,8 @@
return ret;
}
+#define IWL_MAX_RX_BA_SESSIONS 16
+
int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
int tid, u16 ssn, bool start)
{
@@ -618,11 +620,20 @@
lockdep_assert_held(&mvm->mutex);
+ if (start && mvm->rx_ba_sessions >= IWL_MAX_RX_BA_SESSIONS) {
+ IWL_WARN(mvm, "Not enough RX BA SESSIONS\n");
+ return -ENOSPC;
+ }
+
cmd.mac_id_n_color = cpu_to_le32(mvm_sta->mac_id_n_color);
cmd.sta_id = mvm_sta->sta_id;
cmd.add_modify = STA_MODE_MODIFY;
- cmd.add_immediate_ba_tid = (u8) tid;
- cmd.add_immediate_ba_ssn = cpu_to_le16(ssn);
+ if (start) {
+ cmd.add_immediate_ba_tid = (u8) tid;
+ cmd.add_immediate_ba_ssn = cpu_to_le16(ssn);
+ } else {
+ cmd.remove_immediate_ba_tid = (u8) tid;
+ }
cmd.modify_mask = start ? STA_MODIFY_ADD_BA_TID :
STA_MODIFY_REMOVE_BA_TID;
@@ -648,6 +659,14 @@
break;
}
+ if (!ret) {
+ if (start)
+ mvm->rx_ba_sessions++;
+ else if (mvm->rx_ba_sessions > 0)
+ /* check that restart flow didn't zero the counter */
+ mvm->rx_ba_sessions--;
+ }
+
return ret;
}
@@ -896,6 +915,7 @@
struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv;
struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid];
u16 txq_id;
+ enum iwl_mvm_agg_state old_state;
/*
* First set the agg state to OFF to avoid calling
@@ -905,13 +925,17 @@
txq_id = tid_data->txq_id;
IWL_DEBUG_TX_QUEUES(mvm, "Flush AGG: sta %d tid %d q %d state %d\n",
mvmsta->sta_id, tid, txq_id, tid_data->state);
+ old_state = tid_data->state;
tid_data->state = IWL_AGG_OFF;
spin_unlock_bh(&mvmsta->lock);
- if (iwl_mvm_flush_tx_path(mvm, BIT(txq_id), true))
- IWL_ERR(mvm, "Couldn't flush the AGG queue\n");
+ if (old_state >= IWL_AGG_ON) {
+ if (iwl_mvm_flush_tx_path(mvm, BIT(txq_id), true))
+ IWL_ERR(mvm, "Couldn't flush the AGG queue\n");
- iwl_trans_txq_disable(mvm->trans, tid_data->txq_id);
+ iwl_trans_txq_disable(mvm->trans, tid_data->txq_id);
+ }
+
mvm->queue_to_mac80211[tid_data->txq_id] =
IWL_INVALID_MAC80211_QUEUE;
diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c
index ad9bbca..7fd6fbf 100644
--- a/drivers/net/wireless/iwlwifi/mvm/time-event.c
+++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c
@@ -138,6 +138,20 @@
schedule_work(&mvm->roc_done_wk);
}
+static bool iwl_mvm_te_check_disconnect(struct iwl_mvm *mvm,
+ struct ieee80211_vif *vif,
+ const char *errmsg)
+{
+ if (vif->type != NL80211_IFTYPE_STATION)
+ return false;
+ if (vif->bss_conf.assoc && vif->bss_conf.dtim_period)
+ return false;
+ if (errmsg)
+ IWL_ERR(mvm, "%s\n", errmsg);
+ ieee80211_connection_loss(vif);
+ return true;
+}
+
/*
* Handles a FW notification for an event that is known to the driver.
*
@@ -163,8 +177,13 @@
* P2P Device discoveribility, while there are other higher priority
* events in the system).
*/
- WARN_ONCE(!le32_to_cpu(notif->status),
- "Failed to schedule time event\n");
+ if (WARN_ONCE(!le32_to_cpu(notif->status),
+ "Failed to schedule time event\n")) {
+ if (iwl_mvm_te_check_disconnect(mvm, te_data->vif, NULL)) {
+ iwl_mvm_te_clear_data(mvm, te_data);
+ return;
+ }
+ }
if (le32_to_cpu(notif->action) & TE_NOTIF_HOST_EVENT_END) {
IWL_DEBUG_TE(mvm,
@@ -180,14 +199,8 @@
* By now, we should have finished association
* and know the dtim period.
*/
- if (te_data->vif->type == NL80211_IFTYPE_STATION &&
- (!te_data->vif->bss_conf.assoc ||
- !te_data->vif->bss_conf.dtim_period)) {
- IWL_ERR(mvm,
- "No assocation and the time event is over already...\n");
- ieee80211_connection_loss(te_data->vif);
- }
-
+ iwl_mvm_te_check_disconnect(mvm, te_data->vif,
+ "No assocation and the time event is over already...");
iwl_mvm_te_clear_data(mvm, te_data);
} else if (le32_to_cpu(notif->action) & TE_NOTIF_HOST_EVENT_START) {
te_data->running = true;
diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c
index 81f3ea5..ff13458 100644
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@ -130,6 +130,7 @@
{IWL_PCI_DEVICE(0x423C, 0x1306, iwl5150_abg_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x423C, 0x1221, iwl5150_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x423C, 0x1321, iwl5150_agn_cfg)}, /* Half Mini Card */
+ {IWL_PCI_DEVICE(0x423C, 0x1326, iwl5150_abg_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x423D, 0x1211, iwl5150_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x423D, 0x1311, iwl5150_agn_cfg)}, /* Half Mini Card */
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 826c156..390e2f0 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -670,6 +670,11 @@
return err;
}
+ /* Reset the entire device */
+ iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
+
+ usleep_range(10, 15);
+
iwl_pcie_apm_init(trans);
/* From now on, the op_mode will be kept updated about RF kill state */
@@ -1497,16 +1502,16 @@
spin_lock_init(&trans_pcie->reg_lock);
init_waitqueue_head(&trans_pcie->ucode_write_waitq);
- /* W/A - seems to solve weird behavior. We need to remove this if we
- * don't want to stay in L1 all the time. This wastes a lot of power */
- pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
- PCIE_LINK_STATE_CLKPM);
-
if (pci_enable_device(pdev)) {
err = -ENODEV;
goto out_no_pci;
}
+ /* W/A - seems to solve weird behavior. We need to remove this if we
+ * don't want to stay in L1 all the time. This wastes a lot of power */
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+ PCIE_LINK_STATE_CLKPM);
+
pci_set_master(pdev);
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index ef5fa89..89459db 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1716,9 +1716,9 @@
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
int ret;
- if (priv->bss_mode != NL80211_IFTYPE_STATION) {
+ if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA) {
wiphy_err(wiphy,
- "%s: reject infra assoc request in non-STA mode\n",
+ "%s: reject infra assoc request in non-STA role\n",
dev->name);
return -EINVAL;
}
diff --git a/drivers/net/wireless/mwifiex/cfp.c b/drivers/net/wireless/mwifiex/cfp.c
index 988552d..5178c46 100644
--- a/drivers/net/wireless/mwifiex/cfp.c
+++ b/drivers/net/wireless/mwifiex/cfp.c
@@ -415,7 +415,8 @@
u32 k = 0;
struct mwifiex_adapter *adapter = priv->adapter;
- if (priv->bss_mode == NL80211_IFTYPE_STATION) {
+ if (priv->bss_mode == NL80211_IFTYPE_STATION ||
+ priv->bss_mode == NL80211_IFTYPE_P2P_CLIENT) {
switch (adapter->config_bands) {
case BAND_B:
dev_dbg(adapter->dev, "info: infra band=%d "
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index caaf4bd..2cf8b96 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -693,7 +693,7 @@
if (!ret) {
dev_notice(adapter->dev,
"WLAN FW already running! Skip FW dnld\n");
- goto done;
+ return 0;
}
poll_num = MAX_FIRMWARE_POLL_TRIES;
@@ -719,14 +719,8 @@
poll_fw:
/* Check if the firmware is downloaded successfully or not */
ret = adapter->if_ops.check_fw_status(adapter, poll_num);
- if (ret) {
+ if (ret)
dev_err(adapter->dev, "FW failed to be active in time\n");
- return -1;
- }
-done:
- /* re-enable host interrupt for mwifiex after fw dnld is successful */
- if (adapter->if_ops.enable_int)
- adapter->if_ops.enable_int(adapter);
return ret;
}
diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c
index 1c8a771..12e7781 100644
--- a/drivers/net/wireless/mwifiex/join.c
+++ b/drivers/net/wireless/mwifiex/join.c
@@ -1291,8 +1291,10 @@
{
u8 current_bssid[ETH_ALEN];
- /* Return error if the adapter or table entry is not marked as infra */
- if ((priv->bss_mode != NL80211_IFTYPE_STATION) ||
+ /* Return error if the adapter is not STA role or table entry
+ * is not marked as infra.
+ */
+ if ((GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA) ||
(bss_desc->bss_mode != NL80211_IFTYPE_STATION))
return -1;
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index e15ab72..1753431 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -427,6 +427,10 @@
"Cal data request_firmware() failed\n");
}
+ /* enable host interrupt after fw dnld is successful */
+ if (adapter->if_ops.enable_int)
+ adapter->if_ops.enable_int(adapter);
+
adapter->init_wait_q_woken = false;
ret = mwifiex_init_fw(adapter);
if (ret == -1) {
@@ -478,6 +482,8 @@
mwifiex_del_virtual_intf(adapter->wiphy, priv->wdev);
rtnl_unlock();
err_init_fw:
+ if (adapter->if_ops.disable_int)
+ adapter->if_ops.disable_int(adapter);
pr_debug("info: %s: unregister device\n", __func__);
adapter->if_ops.unregister_dev(adapter);
done:
@@ -855,7 +861,7 @@
INIT_WORK(&adapter->main_work, mwifiex_main_work_queue);
/* Register the device. Fill up the private data structure with relevant
- information from the card and request for the required IRQ. */
+ information from the card. */
if (adapter->if_ops.register_dev(adapter)) {
pr_err("%s: failed to register mwifiex device\n", __func__);
goto err_registerdev;
@@ -919,6 +925,11 @@
if (!adapter)
goto exit_remove;
+ /* We can no longer handle interrupts once we start doing the teardown
+ * below. */
+ if (adapter->if_ops.disable_int)
+ adapter->if_ops.disable_int(adapter);
+
adapter->surprise_removed = true;
/* Stop data */
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 3da73d3..253e0bd 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -601,6 +601,7 @@
int (*register_dev) (struct mwifiex_adapter *);
void (*unregister_dev) (struct mwifiex_adapter *);
int (*enable_int) (struct mwifiex_adapter *);
+ void (*disable_int) (struct mwifiex_adapter *);
int (*process_int_status) (struct mwifiex_adapter *);
int (*host_to_card) (struct mwifiex_adapter *, u8, struct sk_buff *,
struct mwifiex_tx_param *);
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index 5ee5ed0..09185c9 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -51,6 +51,7 @@
static struct semaphore add_remove_card_sem;
static int mwifiex_sdio_resume(struct device *dev);
+static void mwifiex_sdio_interrupt(struct sdio_func *func);
/*
* SDIO probe.
@@ -296,6 +297,15 @@
}
};
+/* Write data into SDIO card register. Caller claims SDIO device. */
+static int
+mwifiex_write_reg_locked(struct sdio_func *func, u32 reg, u8 data)
+{
+ int ret = -1;
+ sdio_writeb(func, data, reg, &ret);
+ return ret;
+}
+
/*
* This function writes data into SDIO card register.
*/
@@ -303,10 +313,10 @@
mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u8 data)
{
struct sdio_mmc_card *card = adapter->card;
- int ret = -1;
+ int ret;
sdio_claim_host(card->func);
- sdio_writeb(card->func, data, reg, &ret);
+ ret = mwifiex_write_reg_locked(card->func, reg, data);
sdio_release_host(card->func);
return ret;
@@ -685,23 +695,15 @@
* The host interrupt mask is read, the disable bit is reset and
* written back to the card host interrupt mask register.
*/
-static int mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter)
+static void mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter)
{
- u8 host_int_mask, host_int_disable = HOST_INT_DISABLE;
+ struct sdio_mmc_card *card = adapter->card;
+ struct sdio_func *func = card->func;
- /* Read back the host_int_mask register */
- if (mwifiex_read_reg(adapter, HOST_INT_MASK_REG, &host_int_mask))
- return -1;
-
- /* Update with the mask and write back to the register */
- host_int_mask &= ~host_int_disable;
-
- if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG, host_int_mask)) {
- dev_err(adapter->dev, "disable host interrupt failed\n");
- return -1;
- }
-
- return 0;
+ sdio_claim_host(func);
+ mwifiex_write_reg_locked(func, HOST_INT_MASK_REG, 0);
+ sdio_release_irq(func);
+ sdio_release_host(func);
}
/*
@@ -713,14 +715,29 @@
static int mwifiex_sdio_enable_host_int(struct mwifiex_adapter *adapter)
{
struct sdio_mmc_card *card = adapter->card;
+ struct sdio_func *func = card->func;
+ int ret;
+
+ sdio_claim_host(func);
+
+ /* Request the SDIO IRQ */
+ ret = sdio_claim_irq(func, mwifiex_sdio_interrupt);
+ if (ret) {
+ dev_err(adapter->dev, "claim irq failed: ret=%d\n", ret);
+ goto out;
+ }
/* Simply write the mask to the register */
- if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG,
- card->reg->host_int_enable)) {
+ ret = mwifiex_write_reg_locked(func, HOST_INT_MASK_REG,
+ card->reg->host_int_enable);
+ if (ret) {
dev_err(adapter->dev, "enable host interrupt failed\n");
- return -1;
+ sdio_release_irq(func);
}
- return 0;
+
+out:
+ sdio_release_host(func);
+ return ret;
}
/*
@@ -997,9 +1014,6 @@
}
adapter = card->adapter;
- if (adapter->surprise_removed)
- return;
-
if (!adapter->pps_uapsd_mode && adapter->ps_state == PS_STATE_SLEEP)
adapter->ps_state = PS_STATE_AWAKE;
@@ -1625,8 +1639,8 @@
/* Allocate buffer and copy payload */
blk_size = MWIFIEX_SDIO_BLOCK_SIZE;
buf_block_len = (pkt_len + blk_size - 1) / blk_size;
- *(u16 *) &payload[0] = (u16) pkt_len;
- *(u16 *) &payload[2] = type;
+ *(__le16 *)&payload[0] = cpu_to_le16((u16)pkt_len);
+ *(__le16 *)&payload[2] = cpu_to_le16(type);
/*
* This is SDIO specific header
@@ -1728,9 +1742,7 @@
struct sdio_mmc_card *card = adapter->card;
if (adapter->card) {
- /* Release the SDIO IRQ */
sdio_claim_host(card->func);
- sdio_release_irq(card->func);
sdio_disable_func(card->func);
sdio_release_host(card->func);
sdio_set_drvdata(card->func, NULL);
@@ -1744,7 +1756,7 @@
*/
static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
{
- int ret = 0;
+ int ret;
struct sdio_mmc_card *card = adapter->card;
struct sdio_func *func = card->func;
@@ -1753,22 +1765,14 @@
sdio_claim_host(func);
- /* Request the SDIO IRQ */
- ret = sdio_claim_irq(func, mwifiex_sdio_interrupt);
- if (ret) {
- pr_err("claim irq failed: ret=%d\n", ret);
- goto disable_func;
- }
-
/* Set block size */
ret = sdio_set_block_size(card->func, MWIFIEX_SDIO_BLOCK_SIZE);
+ sdio_release_host(func);
if (ret) {
pr_err("cannot set SDIO block size\n");
- ret = -1;
- goto release_irq;
+ return ret;
}
- sdio_release_host(func);
sdio_set_drvdata(func, card);
adapter->dev = &func->dev;
@@ -1776,15 +1780,6 @@
strcpy(adapter->fw_name, card->firmware);
return 0;
-
-release_irq:
- sdio_release_irq(func);
-disable_func:
- sdio_disable_func(func);
- sdio_release_host(func);
- adapter->card = NULL;
-
- return -1;
}
/*
@@ -1813,9 +1808,6 @@
*/
mwifiex_read_reg(adapter, HOST_INTSTATUS_REG, &sdio_ireg);
- /* Disable host interrupt mask register for SDIO */
- mwifiex_sdio_disable_host_int(adapter);
-
/* Get SDIO ioport */
mwifiex_init_sdio_ioport(adapter);
@@ -1957,6 +1949,7 @@
.register_dev = mwifiex_register_dev,
.unregister_dev = mwifiex_unregister_dev,
.enable_int = mwifiex_sdio_enable_host_int,
+ .disable_int = mwifiex_sdio_disable_host_int,
.process_int_status = mwifiex_process_int_status,
.host_to_card = mwifiex_sdio_host_to_card,
.wakeup = mwifiex_pm_wakeup_card,
diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
index 6d51dfd..532ae0a 100644
--- a/drivers/net/wireless/mwifiex/sdio.h
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -92,9 +92,6 @@
/* Host Control Registers : Download host interrupt mask */
#define DN_LD_HOST_INT_MASK (0x2U)
-/* Disable Host interrupt mask */
-#define HOST_INT_DISABLE 0xff
-
/* Host Control Registers : Host interrupt status */
#define HOST_INTSTATUS_REG 0x03
/* Host Control Registers : Upload host interrupt status */
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 206c3e0..8af97ab 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -257,10 +257,10 @@
goto done;
}
- if (priv->bss_mode == NL80211_IFTYPE_STATION) {
+ if (priv->bss_mode == NL80211_IFTYPE_STATION ||
+ priv->bss_mode == NL80211_IFTYPE_P2P_CLIENT) {
u8 config_bands;
- /* Infra mode */
ret = mwifiex_deauthenticate(priv, NULL);
if (ret)
goto done;
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index 9b915d3..3e60a31 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -1,6 +1,6 @@
menuconfig RT2X00
tristate "Ralink driver support"
- depends on MAC80211
+ depends on MAC80211 && HAS_DMA
---help---
This will enable the support for the Ralink drivers,
developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 6c0a91f..aa95c6c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -936,13 +936,8 @@
spin_unlock_irqrestore(&queue->index_lock, irqflags);
}
-void rt2x00queue_pause_queue(struct data_queue *queue)
+void rt2x00queue_pause_queue_nocheck(struct data_queue *queue)
{
- if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) ||
- !test_bit(QUEUE_STARTED, &queue->flags) ||
- test_and_set_bit(QUEUE_PAUSED, &queue->flags))
- return;
-
switch (queue->qid) {
case QID_AC_VO:
case QID_AC_VI:
@@ -958,6 +953,15 @@
break;
}
}
+void rt2x00queue_pause_queue(struct data_queue *queue)
+{
+ if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) ||
+ !test_bit(QUEUE_STARTED, &queue->flags) ||
+ test_and_set_bit(QUEUE_PAUSED, &queue->flags))
+ return;
+
+ rt2x00queue_pause_queue_nocheck(queue);
+}
EXPORT_SYMBOL_GPL(rt2x00queue_pause_queue);
void rt2x00queue_unpause_queue(struct data_queue *queue)
@@ -1019,7 +1023,7 @@
return;
}
- rt2x00queue_pause_queue(queue);
+ rt2x00queue_pause_queue_nocheck(queue);
queue->rt2x00dev->ops->lib->stop_queue(queue);
diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig
index 7253de3..c2ffce7 100644
--- a/drivers/net/wireless/rtlwifi/Kconfig
+++ b/drivers/net/wireless/rtlwifi/Kconfig
@@ -1,13 +1,91 @@
-config RTLWIFI
- tristate "Realtek wireless card support"
- depends on MAC80211
- select FW_LOADER
+menuconfig RTL_CARDS
+ tristate "Realtek rtlwifi family of devices"
+ depends on MAC80211 && (PCI || USB)
+ default y
---help---
- This is common code for RTL8192CE/RTL8192CU/RTL8192SE/RTL8723AE
- drivers. This module does nothing by itself - the various front-end
- drivers need to be enabled to support any desired devices.
+ This option will enable support for the Realtek mac80211-based
+ wireless drivers. Drivers rtl8192ce, rtl8192cu, rtl8192se, rtl8192de,
+ rtl8723eu, and rtl8188eu share some common code.
- If you choose to build as a module, it'll be called rtlwifi.
+if RTL_CARDS
+
+config RTL8192CE
+ tristate "Realtek RTL8192CE/RTL8188CE Wireless Network Adapter"
+ depends on PCI
+ select RTL8192C_COMMON
+ select RTLWIFI
+ select RTLWIFI_PCI
+ ---help---
+ This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe
+ wireless network adapters.
+
+ If you choose to build it as a module, it will be called rtl8192ce
+
+config RTL8192SE
+ tristate "Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter"
+ depends on PCI
+ select RTLWIFI
+ select RTLWIFI_PCI
+ ---help---
+ This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe
+ wireless network adapters.
+
+ If you choose to build it as a module, it will be called rtl8192se
+
+config RTL8192DE
+ tristate "Realtek RTL8192DE/RTL8188DE PCIe Wireless Network Adapter"
+ depends on PCI
+ select RTLWIFI
+ select RTLWIFI_PCI
+ ---help---
+ This is the driver for Realtek RTL8192DE/RTL8188DE 802.11n PCIe
+ wireless network adapters.
+
+ If you choose to build it as a module, it will be called rtl8192de
+
+config RTL8723AE
+ tristate "Realtek RTL8723AE PCIe Wireless Network Adapter"
+ depends on PCI
+ select RTLWIFI
+ select RTLWIFI_PCI
+ ---help---
+ This is the driver for Realtek RTL8723AE 802.11n PCIe
+ wireless network adapters.
+
+ If you choose to build it as a module, it will be called rtl8723ae
+
+config RTL8188EE
+ tristate "Realtek RTL8188EE Wireless Network Adapter"
+ depends on PCI
+ select RTLWIFI
+ select RTLWIFI_PCI
+ ---help---
+ This is the driver for Realtek RTL8188EE 802.11n PCIe
+ wireless network adapters.
+
+ If you choose to build it as a module, it will be called rtl8188ee
+
+config RTL8192CU
+ tristate "Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter"
+ depends on USB
+ select RTLWIFI
+ select RTLWIFI_USB
+ select RTL8192C_COMMON
+ ---help---
+ This is the driver for Realtek RTL8192CU/RTL8188CU 802.11n USB
+ wireless network adapters.
+
+ If you choose to build it as a module, it will be called rtl8192cu
+
+config RTLWIFI
+ tristate
+ select FW_LOADER
+
+config RTLWIFI_PCI
+ tristate
+
+config RTLWIFI_USB
+ tristate
config RTLWIFI_DEBUG
bool "Debugging output for rtlwifi driver family"
@@ -18,63 +96,9 @@
the front-end driver, this parameter must be "Y". For memory-limited
systems, choose "N". If in doubt, choose "Y".
-config RTL8192CE
- tristate "Realtek RTL8192CE/RTL8188CE Wireless Network Adapter"
- depends on RTLWIFI && PCI
- select RTL8192C_COMMON
- ---help---
- This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe
- wireless network adapters.
-
- If you choose to build it as a module, it will be called rtl8192ce
-
-config RTL8192SE
- tristate "Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter"
- depends on RTLWIFI && PCI
- ---help---
- This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe
- wireless network adapters.
-
- If you choose to build it as a module, it will be called rtl8192se
-
-config RTL8192DE
- tristate "Realtek RTL8192DE/RTL8188DE PCIe Wireless Network Adapter"
- depends on RTLWIFI && PCI
- ---help---
- This is the driver for Realtek RTL8192DE/RTL8188DE 802.11n PCIe
- wireless network adapters.
-
- If you choose to build it as a module, it will be called rtl8192de
-
-config RTL8723AE
- tristate "Realtek RTL8723AE PCIe Wireless Network Adapter"
- depends on RTLWIFI && PCI
- ---help---
- This is the driver for Realtek RTL8723AE 802.11n PCIe
- wireless network adapters.
-
- If you choose to build it as a module, it will be called rtl8723ae
-
-config RTL8188EE
- tristate "Realtek RTL8188EE Wireless Network Adapter"
- depends on RTLWIFI && PCI
- ---help---
- This is the driver for Realtek RTL8188EE 802.11n PCIe
- wireless network adapters.
-
- If you choose to build it as a module, it will be called rtl8188ee
-
-config RTL8192CU
- tristate "Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter"
- depends on RTLWIFI && USB
- select RTL8192C_COMMON
- ---help---
- This is the driver for Realtek RTL8192CU/RTL8188CU 802.11n USB
- wireless network adapters.
-
- If you choose to build it as a module, it will be called rtl8192cu
-
config RTL8192C_COMMON
tristate
depends on RTL8192CE || RTL8192CU
- default m
+ default y
+
+endif
diff --git a/drivers/net/wireless/rtlwifi/Makefile b/drivers/net/wireless/rtlwifi/Makefile
index ff02b87..d56f023 100644
--- a/drivers/net/wireless/rtlwifi/Makefile
+++ b/drivers/net/wireless/rtlwifi/Makefile
@@ -12,13 +12,11 @@
rtl8192c_common-objs += \
-ifneq ($(CONFIG_PCI),)
-rtlwifi-objs += pci.o
-endif
+obj-$(CONFIG_RTLWIFI_PCI) += rtl_pci.o
+rtl_pci-objs := pci.o
-ifneq ($(CONFIG_USB),)
-rtlwifi-objs += usb.o
-endif
+obj-$(CONFIG_RTLWIFI_USB) += rtl_usb.o
+rtl_usb-objs := usb.o
obj-$(CONFIG_RTL8192C_COMMON) += rtl8192c/
obj-$(CONFIG_RTL8192CE) += rtl8192ce/
diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c
index 9d558ac..7651f5a 100644
--- a/drivers/net/wireless/rtlwifi/base.c
+++ b/drivers/net/wireless/rtlwifi/base.c
@@ -172,6 +172,7 @@
{
return tid_to_ac[tid];
}
+EXPORT_SYMBOL_GPL(rtl_tid_to_ac);
static void _rtl_init_hw_ht_capab(struct ieee80211_hw *hw,
struct ieee80211_sta_ht_cap *ht_cap)
@@ -406,6 +407,7 @@
cancel_delayed_work(&rtlpriv->works.ps_rfon_wq);
cancel_delayed_work(&rtlpriv->works.fwevt_wq);
}
+EXPORT_SYMBOL_GPL(rtl_deinit_deferred_work);
void rtl_init_rfkill(struct ieee80211_hw *hw)
{
@@ -439,6 +441,7 @@
{
wiphy_rfkill_stop_polling(hw->wiphy);
}
+EXPORT_SYMBOL_GPL(rtl_deinit_rfkill);
int rtl_init_core(struct ieee80211_hw *hw)
{
@@ -489,10 +492,12 @@
return 0;
}
+EXPORT_SYMBOL_GPL(rtl_init_core);
void rtl_deinit_core(struct ieee80211_hw *hw)
{
}
+EXPORT_SYMBOL_GPL(rtl_deinit_core);
void rtl_init_rx_config(struct ieee80211_hw *hw)
{
@@ -501,6 +506,7 @@
rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *) (&mac->rx_conf));
}
+EXPORT_SYMBOL_GPL(rtl_init_rx_config);
/*********************************************************
*
@@ -879,6 +885,7 @@
return true;
}
+EXPORT_SYMBOL_GPL(rtl_tx_mgmt_proc);
void rtl_get_tcb_desc(struct ieee80211_hw *hw,
struct ieee80211_tx_info *info,
@@ -1052,6 +1059,7 @@
return true;
}
+EXPORT_SYMBOL_GPL(rtl_action_proc);
/*should call before software enc*/
u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
@@ -1125,6 +1133,7 @@
return false;
}
+EXPORT_SYMBOL_GPL(rtl_is_special_data);
/*********************************************************
*
@@ -1300,6 +1309,7 @@
rtlpriv->link_info.bcn_rx_inperiod++;
}
+EXPORT_SYMBOL_GPL(rtl_beacon_statistic);
void rtl_watchdog_wq_callback(void *data)
{
@@ -1793,6 +1803,7 @@
mac->vendor = vendor;
}
+EXPORT_SYMBOL_GPL(rtl_recognize_peer);
/*********************************************************
*
@@ -1849,6 +1860,7 @@
.name = "rtlsysfs",
.attrs = rtl_sysfs_entries,
};
+EXPORT_SYMBOL_GPL(rtl_attribute_group);
MODULE_AUTHOR("lizhaoming <chaoming_li@realsil.com.cn>");
MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>");
@@ -1856,7 +1868,8 @@
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Realtek 802.11n PCI wireless core");
-struct rtl_global_var global_var = {};
+struct rtl_global_var rtl_global_var = {};
+EXPORT_SYMBOL_GPL(rtl_global_var);
static int __init rtl_core_module_init(void)
{
@@ -1864,8 +1877,8 @@
pr_err("Unable to register rtl_rc, use default RC !!\n");
/* init some global vars */
- INIT_LIST_HEAD(&global_var.glb_priv_list);
- spin_lock_init(&global_var.glb_list_lock);
+ INIT_LIST_HEAD(&rtl_global_var.glb_priv_list);
+ spin_lock_init(&rtl_global_var.glb_list_lock);
return 0;
}
diff --git a/drivers/net/wireless/rtlwifi/base.h b/drivers/net/wireless/rtlwifi/base.h
index 8576bc3..0e5fe09 100644
--- a/drivers/net/wireless/rtlwifi/base.h
+++ b/drivers/net/wireless/rtlwifi/base.h
@@ -147,7 +147,7 @@
u8 rtl_tid_to_ac(u8 tid);
extern struct attribute_group rtl_attribute_group;
void rtl_easy_concurrent_retrytimer_callback(unsigned long data);
-extern struct rtl_global_var global_var;
+extern struct rtl_global_var rtl_global_var;
int rtlwifi_rate_mapping(struct ieee80211_hw *hw,
bool isht, u8 desc_rate, bool first_ampdu);
bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb);
diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c
index ee84844..733b7ce 100644
--- a/drivers/net/wireless/rtlwifi/core.c
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -1330,3 +1330,4 @@
.rfkill_poll = rtl_op_rfkill_poll,
.flush = rtl_op_flush,
};
+EXPORT_SYMBOL_GPL(rtl_ops);
diff --git a/drivers/net/wireless/rtlwifi/debug.c b/drivers/net/wireless/rtlwifi/debug.c
index 7d52d3d..76e2086 100644
--- a/drivers/net/wireless/rtlwifi/debug.c
+++ b/drivers/net/wireless/rtlwifi/debug.c
@@ -51,3 +51,4 @@
/*Init Debug flag enable condition */
}
+EXPORT_SYMBOL_GPL(rtl_dbgp_flag_init);
diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c
index 9e38941..838a1ed 100644
--- a/drivers/net/wireless/rtlwifi/efuse.c
+++ b/drivers/net/wireless/rtlwifi/efuse.c
@@ -229,6 +229,7 @@
*pbuf = (u8) (value32 & 0xff);
}
+EXPORT_SYMBOL_GPL(read_efuse_byte);
void read_efuse(struct ieee80211_hw *hw, u16 _offset, u16 _size_byte, u8 *pbuf)
{
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index c97e9d3..703f839 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -35,6 +35,13 @@
#include "efuse.h"
#include <linux/export.h>
#include <linux/kmemleak.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("lizhaoming <chaoming_li@realsil.com.cn>");
+MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>");
+MODULE_AUTHOR("Larry Finger <Larry.FInger@lwfinger.net>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCI basic driver for rtlwifi");
static const u16 pcibridge_vendors[PCI_BRIDGE_VENDOR_MAX] = {
PCI_VENDOR_ID_INTEL,
@@ -1008,19 +1015,6 @@
return;
}
-static void rtl_lps_change_work_callback(struct work_struct *work)
-{
- struct rtl_works *rtlworks =
- container_of(work, struct rtl_works, lps_change_work);
- struct ieee80211_hw *hw = rtlworks->hw;
- struct rtl_priv *rtlpriv = rtl_priv(hw);
-
- if (rtlpriv->enter_ps)
- rtl_lps_enter(hw);
- else
- rtl_lps_leave(hw);
-}
-
static void _rtl_pci_init_trx_var(struct ieee80211_hw *hw)
{
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
@@ -1899,7 +1893,7 @@
rtlpriv->rtlhal.interface = INTF_PCI;
rtlpriv->cfg = (struct rtl_hal_cfg *)(id->driver_data);
rtlpriv->intf_ops = &rtl_pci_ops;
- rtlpriv->glb_var = &global_var;
+ rtlpriv->glb_var = &rtl_global_var;
/*
*init dbgp flags before all
diff --git a/drivers/net/wireless/rtlwifi/ps.c b/drivers/net/wireless/rtlwifi/ps.c
index 884bcea..298b615 100644
--- a/drivers/net/wireless/rtlwifi/ps.c
+++ b/drivers/net/wireless/rtlwifi/ps.c
@@ -269,6 +269,7 @@
spin_unlock_irqrestore(&rtlpriv->locks.ips_lock, flags);
}
+EXPORT_SYMBOL_GPL(rtl_ips_nic_on);
/*for FW LPS*/
@@ -518,6 +519,7 @@
"u_bufferd: %x, m_buffered: %x\n", u_buffed, m_buffed);
}
}
+EXPORT_SYMBOL_GPL(rtl_swlps_beacon);
void rtl_swlps_rf_awake(struct ieee80211_hw *hw)
{
@@ -611,6 +613,19 @@
MSECS(sleep_intv * mac->vif->bss_conf.beacon_int - 40));
}
+void rtl_lps_change_work_callback(struct work_struct *work)
+{
+ struct rtl_works *rtlworks =
+ container_of(work, struct rtl_works, lps_change_work);
+ struct ieee80211_hw *hw = rtlworks->hw;
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (rtlpriv->enter_ps)
+ rtl_lps_enter(hw);
+ else
+ rtl_lps_leave(hw);
+}
+EXPORT_SYMBOL_GPL(rtl_lps_change_work_callback);
void rtl_swlps_wq_callback(void *data)
{
@@ -922,3 +937,4 @@
else
rtl_p2p_noa_ie(hw, data, len - FCS_LEN);
}
+EXPORT_SYMBOL_GPL(rtl_p2p_info);
diff --git a/drivers/net/wireless/rtlwifi/ps.h b/drivers/net/wireless/rtlwifi/ps.h
index 4d682b7..88bd76e 100644
--- a/drivers/net/wireless/rtlwifi/ps.h
+++ b/drivers/net/wireless/rtlwifi/ps.h
@@ -49,5 +49,6 @@
void rtl_swlps_rf_sleep(struct ieee80211_hw *hw);
void rtl_p2p_ps_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state);
void rtl_p2p_info(struct ieee80211_hw *hw, void *data, unsigned int len);
+void rtl_lps_change_work_callback(struct work_struct *work);
#endif
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index a3532e0..e56778c 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -32,6 +32,13 @@
#include "ps.h"
#include "rtl8192c/fw_common.h"
#include <linux/export.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("lizhaoming <chaoming_li@realsil.com.cn>");
+MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>");
+MODULE_AUTHOR("Larry Finger <Larry.FInger@lwfinger.net>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("USB basic driver for rtlwifi");
#define REALTEK_USB_VENQT_READ 0xC0
#define REALTEK_USB_VENQT_WRITE 0x40
@@ -1070,6 +1077,8 @@
spin_lock_init(&rtlpriv->locks.usb_lock);
INIT_WORK(&rtlpriv->works.fill_h2c_cmd,
rtl_fill_h2c_cmd_work_callback);
+ INIT_WORK(&rtlpriv->works.lps_change_work,
+ rtl_lps_change_work_callback);
rtlpriv->usb_data_index = 0;
init_completion(&rtlpriv->firmware_loading_complete);
diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c
index 4941f20..b8ba1f9 100644
--- a/drivers/net/wireless/zd1201.c
+++ b/drivers/net/wireless/zd1201.c
@@ -98,10 +98,12 @@
goto exit;
err = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 0x4,
- USB_DIR_IN | 0x40, 0,0, &ret, sizeof(ret), ZD1201_FW_TIMEOUT);
+ USB_DIR_IN | 0x40, 0, 0, buf, sizeof(ret), ZD1201_FW_TIMEOUT);
if (err < 0)
goto exit;
+ memcpy(&ret, buf, sizeof(ret));
+
if (ret & 0x80) {
err = -EIO;
goto exit;
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index b62d4af..45e9214 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -361,7 +361,8 @@
__u16 vendor;
__u16 coreid;
__u8 revision;
-};
+ __u8 __pad;
+} __attribute__((packed, aligned(2)));
#define SSB_DEVICE(_vendor, _coreid, _revision) \
{ .vendor = _vendor, .coreid = _coreid, .revision = _revision, }
#define SSB_DEVTABLE_END \
@@ -377,7 +378,7 @@
__u16 id;
__u8 rev;
__u8 class;
-};
+} __attribute__((packed,aligned(2)));
#define BCMA_CORE(_manuf, _id, _rev, _class) \
{ .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
#define BCMA_CORETABLE_END \
diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h
index 0af851c..b64b7bc 100644
--- a/include/net/nfc/hci.h
+++ b/include/net/nfc/hci.h
@@ -59,7 +59,7 @@
struct nfc_target *target);
int (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event,
struct sk_buff *skb);
- int (*fw_upload)(struct nfc_hci_dev *hdev, const char *firmware_name);
+ int (*fw_download)(struct nfc_hci_dev *hdev, const char *firmware_name);
int (*discover_se)(struct nfc_hci_dev *dev);
int (*enable_se)(struct nfc_hci_dev *dev, u32 se_idx);
int (*disable_se)(struct nfc_hci_dev *dev, u32 se_idx);
diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h
index 0e353f1..5f286b7 100644
--- a/include/net/nfc/nfc.h
+++ b/include/net/nfc/nfc.h
@@ -68,7 +68,7 @@
void *cb_context);
int (*tm_send)(struct nfc_dev *dev, struct sk_buff *skb);
int (*check_presence)(struct nfc_dev *dev, struct nfc_target *target);
- int (*fw_upload)(struct nfc_dev *dev, const char *firmware_name);
+ int (*fw_download)(struct nfc_dev *dev, const char *firmware_name);
/* Secure Element API */
int (*discover_se)(struct nfc_dev *dev);
@@ -127,7 +127,7 @@
int targets_generation;
struct device dev;
bool dev_up;
- bool fw_upload_in_progress;
+ bool fw_download_in_progress;
u8 rf_mode;
bool polling;
struct nfc_target *active_target;
diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h
index caed0f3..8137dd8 100644
--- a/include/uapi/linux/nfc.h
+++ b/include/uapi/linux/nfc.h
@@ -69,8 +69,8 @@
* starting a poll from a device which has a secure element enabled means
* we want to do SE based card emulation.
* @NFC_CMD_DISABLE_SE: Disable the physical link to a specific secure element.
- * @NFC_CMD_FW_UPLOAD: Request to Load/flash firmware, or event to inform that
- * some firmware was loaded
+ * @NFC_CMD_FW_DOWNLOAD: Request to Load/flash firmware, or event to inform
+ * that some firmware was loaded
*/
enum nfc_commands {
NFC_CMD_UNSPEC,
@@ -94,7 +94,7 @@
NFC_CMD_DISABLE_SE,
NFC_CMD_LLC_SDREQ,
NFC_EVENT_LLC_SDRES,
- NFC_CMD_FW_UPLOAD,
+ NFC_CMD_FW_DOWNLOAD,
NFC_EVENT_SE_ADDED,
NFC_EVENT_SE_REMOVED,
/* private: internal use only */
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index e3a3499..cc27297 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -513,7 +513,10 @@
hci_setup_event_mask(req);
- if (hdev->hci_ver > BLUETOOTH_VER_1_1)
+ /* AVM Berlin (31), aka "BlueFRITZ!", doesn't support the read
+ * local supported commands HCI command.
+ */
+ if (hdev->manufacturer != 31 && hdev->hci_ver > BLUETOOTH_VER_1_1)
hci_req_add(req, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL);
if (lmp_ssp_capable(hdev)) {
@@ -2165,10 +2168,6 @@
BT_DBG("%p name %s bus %d", hdev, hdev->name, hdev->bus);
- write_lock(&hci_dev_list_lock);
- list_add(&hdev->list, &hci_dev_list);
- write_unlock(&hci_dev_list_lock);
-
hdev->workqueue = alloc_workqueue("%s", WQ_HIGHPRI | WQ_UNBOUND |
WQ_MEM_RECLAIM, 1, hdev->name);
if (!hdev->workqueue) {
@@ -2203,6 +2202,10 @@
if (hdev->dev_type != HCI_AMP)
set_bit(HCI_AUTO_OFF, &hdev->dev_flags);
+ write_lock(&hci_dev_list_lock);
+ list_add(&hdev->list, &hci_dev_list);
+ write_unlock(&hci_dev_list_lock);
+
hci_notify(hdev, HCI_DEV_REG);
hci_dev_hold(hdev);
@@ -2215,9 +2218,6 @@
destroy_workqueue(hdev->req_workqueue);
err:
ida_simple_remove(&hci_index_ida, hdev->id);
- write_lock(&hci_dev_list_lock);
- list_del(&hdev->list);
- write_unlock(&hci_dev_list_lock);
return error;
}
@@ -3399,8 +3399,16 @@
*/
if (hdev->sent_cmd) {
req_complete = bt_cb(hdev->sent_cmd)->req.complete;
- if (req_complete)
+
+ if (req_complete) {
+ /* We must set the complete callback to NULL to
+ * avoid calling the callback more than once if
+ * this function gets called again.
+ */
+ bt_cb(hdev->sent_cmd)->req.complete = NULL;
+
goto call_complete;
+ }
}
/* Remove all pending commands belonging to this request */
diff --git a/net/nfc/core.c b/net/nfc/core.c
index dc96a83..1d074dd 100644
--- a/net/nfc/core.c
+++ b/net/nfc/core.c
@@ -44,7 +44,7 @@
/* NFC device ID bitmap */
static DEFINE_IDA(nfc_index_ida);
-int nfc_fw_upload(struct nfc_dev *dev, const char *firmware_name)
+int nfc_fw_download(struct nfc_dev *dev, const char *firmware_name)
{
int rc = 0;
@@ -62,28 +62,28 @@
goto error;
}
- if (!dev->ops->fw_upload) {
+ if (!dev->ops->fw_download) {
rc = -EOPNOTSUPP;
goto error;
}
- dev->fw_upload_in_progress = true;
- rc = dev->ops->fw_upload(dev, firmware_name);
+ dev->fw_download_in_progress = true;
+ rc = dev->ops->fw_download(dev, firmware_name);
if (rc)
- dev->fw_upload_in_progress = false;
+ dev->fw_download_in_progress = false;
error:
device_unlock(&dev->dev);
return rc;
}
-int nfc_fw_upload_done(struct nfc_dev *dev, const char *firmware_name)
+int nfc_fw_download_done(struct nfc_dev *dev, const char *firmware_name)
{
- dev->fw_upload_in_progress = false;
+ dev->fw_download_in_progress = false;
- return nfc_genl_fw_upload_done(dev, firmware_name);
+ return nfc_genl_fw_download_done(dev, firmware_name);
}
-EXPORT_SYMBOL(nfc_fw_upload_done);
+EXPORT_SYMBOL(nfc_fw_download_done);
/**
* nfc_dev_up - turn on the NFC device
@@ -110,7 +110,7 @@
goto error;
}
- if (dev->fw_upload_in_progress) {
+ if (dev->fw_download_in_progress) {
rc = -EBUSY;
goto error;
}
diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c
index 7b1c186..fe66908 100644
--- a/net/nfc/hci/core.c
+++ b/net/nfc/hci/core.c
@@ -809,14 +809,14 @@
}
}
-static int hci_fw_upload(struct nfc_dev *nfc_dev, const char *firmware_name)
+static int hci_fw_download(struct nfc_dev *nfc_dev, const char *firmware_name)
{
struct nfc_hci_dev *hdev = nfc_get_drvdata(nfc_dev);
- if (!hdev->ops->fw_upload)
+ if (!hdev->ops->fw_download)
return -ENOTSUPP;
- return hdev->ops->fw_upload(hdev, firmware_name);
+ return hdev->ops->fw_download(hdev, firmware_name);
}
static struct nfc_ops hci_nfc_ops = {
@@ -831,7 +831,7 @@
.im_transceive = hci_transceive,
.tm_send = hci_tm_send,
.check_presence = hci_check_presence,
- .fw_upload = hci_fw_upload,
+ .fw_download = hci_fw_download,
.discover_se = hci_discover_se,
.enable_se = hci_enable_se,
.disable_se = hci_disable_se,
diff --git a/net/nfc/nci/Kconfig b/net/nfc/nci/Kconfig
index 2a24160..a4f1e42 100644
--- a/net/nfc/nci/Kconfig
+++ b/net/nfc/nci/Kconfig
@@ -11,6 +11,7 @@
config NFC_NCI_SPI
depends on NFC_NCI && SPI
+ select CRC_CCITT
bool "NCI over SPI protocol support"
default n
help
diff --git a/net/nfc/netlink.c b/net/nfc/netlink.c
index b05ad90..f16fd59 100644
--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -1089,7 +1089,7 @@
return rc;
}
-static int nfc_genl_fw_upload(struct sk_buff *skb, struct genl_info *info)
+static int nfc_genl_fw_download(struct sk_buff *skb, struct genl_info *info)
{
struct nfc_dev *dev;
int rc;
@@ -1108,13 +1108,13 @@
nla_strlcpy(firmware_name, info->attrs[NFC_ATTR_FIRMWARE_NAME],
sizeof(firmware_name));
- rc = nfc_fw_upload(dev, firmware_name);
+ rc = nfc_fw_download(dev, firmware_name);
nfc_put_device(dev);
return rc;
}
-int nfc_genl_fw_upload_done(struct nfc_dev *dev, const char *firmware_name)
+int nfc_genl_fw_download_done(struct nfc_dev *dev, const char *firmware_name)
{
struct sk_buff *msg;
void *hdr;
@@ -1124,7 +1124,7 @@
return -ENOMEM;
hdr = genlmsg_put(msg, 0, 0, &nfc_genl_family, 0,
- NFC_CMD_FW_UPLOAD);
+ NFC_CMD_FW_DOWNLOAD);
if (!hdr)
goto free_msg;
@@ -1251,8 +1251,8 @@
.policy = nfc_genl_policy,
},
{
- .cmd = NFC_CMD_FW_UPLOAD,
- .doit = nfc_genl_fw_upload,
+ .cmd = NFC_CMD_FW_DOWNLOAD,
+ .doit = nfc_genl_fw_download,
.policy = nfc_genl_policy,
},
{
diff --git a/net/nfc/nfc.h b/net/nfc/nfc.h
index ee85a1f..820a785 100644
--- a/net/nfc/nfc.h
+++ b/net/nfc/nfc.h
@@ -123,10 +123,10 @@
class_dev_iter_exit(iter);
}
-int nfc_fw_upload(struct nfc_dev *dev, const char *firmware_name);
-int nfc_genl_fw_upload_done(struct nfc_dev *dev, const char *firmware_name);
+int nfc_fw_download(struct nfc_dev *dev, const char *firmware_name);
+int nfc_genl_fw_download_done(struct nfc_dev *dev, const char *firmware_name);
-int nfc_fw_upload_done(struct nfc_dev *dev, const char *firmware_name);
+int nfc_fw_download_done(struct nfc_dev *dev, const char *firmware_name);
int nfc_dev_up(struct nfc_dev *dev);