USB: chipidea: add vbus detect for udc
Using vbus valid interrupt to detect vbus.
Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index d214448..2f45bba 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -305,6 +305,18 @@
return reg;
}
+static void hw_enable_vbus_intr(struct ci13xxx *ci)
+{
+ hw_write(ci, OP_OTGSC, OTGSC_AVVIS, OTGSC_AVVIS);
+ hw_write(ci, OP_OTGSC, OTGSC_AVVIE, OTGSC_AVVIE);
+ queue_work(ci->wq, &ci->vbus_work);
+}
+
+static void hw_disable_vbus_intr(struct ci13xxx *ci)
+{
+ hw_write(ci, OP_OTGSC, OTGSC_AVVIE, 0);
+}
+
/**
* hw_test_and_clear_setup_guard: test & clear setup guard (execute without
* interruption)
@@ -371,6 +383,16 @@
return 0;
}
+static void vbus_work(struct work_struct *work)
+{
+ struct ci13xxx *ci = container_of(work, struct ci13xxx, vbus_work);
+
+ if (hw_read(ci, OP_OTGSC, OTGSC_AVV))
+ usb_gadget_vbus_connect(&ci->gadget);
+ else
+ usb_gadget_vbus_disconnect(&ci->gadget);
+}
+
/******************************************************************************
* UTIL block
*****************************************************************************/
@@ -1370,6 +1392,7 @@
if (is_active) {
pm_runtime_get_sync(&_gadget->dev);
hw_device_reset(ci, USBMODE_CM_DC);
+ hw_enable_vbus_intr(ci);
hw_device_state(ci, ci->ep0out->qh.dma);
} else {
hw_device_state(ci, 0);
@@ -1544,8 +1567,10 @@
pm_runtime_get_sync(&ci->gadget.dev);
if (ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) {
if (ci->vbus_active) {
- if (ci->platdata->flags & CI13XXX_REGS_SHARED)
+ if (ci->platdata->flags & CI13XXX_REGS_SHARED) {
hw_device_reset(ci, USBMODE_CM_DC);
+ hw_enable_vbus_intr(ci);
+ }
} else {
pm_runtime_put_sync(&ci->gadget.dev);
goto done;
@@ -1651,6 +1676,13 @@
} else {
retval = IRQ_NONE;
}
+
+ intr = hw_read(ci, OP_OTGSC, ~0);
+ hw_write(ci, OP_OTGSC, ~0, intr);
+
+ if (intr & (OTGSC_AVVIE & OTGSC_AVVIS))
+ queue_work(ci->wq, &ci->vbus_work);
+
spin_unlock(&ci->lock);
return retval;
@@ -1726,6 +1758,7 @@
retval = hw_device_reset(ci, USBMODE_CM_DC);
if (retval)
goto put_transceiver;
+ hw_enable_vbus_intr(ci);
}
retval = device_register(&ci->gadget.dev);
@@ -1788,6 +1821,9 @@
if (ci == NULL)
return;
+ hw_disable_vbus_intr(ci);
+ cancel_work_sync(&ci->vbus_work);
+
usb_del_gadget_udc(&ci->gadget);
destroy_eps(ci);
@@ -1828,6 +1864,7 @@
rdrv->irq = udc_irq;
rdrv->name = "gadget";
ci->roles[CI_ROLE_GADGET] = rdrv;
+ INIT_WORK(&ci->vbus_work, vbus_work);
return 0;
}