igb: disable IPv6 extension header processing
Disable IPv6 extension header processing as per hardware errata.
Also fix copyright date.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 0f69ef8..b0182dd 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -1,5 +1,5 @@
/* Intel(R) Gigabit Ethernet Linux driver
- * Copyright(c) 2007-2014 Intel Corporation.
+ * Copyright(c) 2007-2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -1900,8 +1900,8 @@
* igb_rx_fifo_flush_82575 - Clean rx fifo after RX enable
* @hw: pointer to the HW structure
*
- * After rx enable if managability is enabled then there is likely some
- * bad data at the start of the fifo and possibly in the DMA fifo. This
+ * After rx enable if manageability is enabled then there is likely some
+ * bad data at the start of the fifo and possibly in the DMA fifo. This
* function clears the fifos and flushes any packets that came in as rx was
* being enabled.
**/
@@ -1910,6 +1910,11 @@
u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
int i, ms_wait;
+ /* disable IPv6 options as per hardware errata */
+ rfctl = rd32(E1000_RFCTL);
+ rfctl |= E1000_RFCTL_IPV6_EX_DIS;
+ wr32(E1000_RFCTL, rfctl);
+
if (hw->mac.type != e1000_82575 ||
!(rd32(E1000_MANC) & E1000_MANC_RCV_TCO_EN))
return;
@@ -1937,7 +1942,6 @@
* incoming packets are rejected. Set enable and wait 2ms so that
* any packet that was coming in as RCTL.EN was set is flushed
*/
- rfctl = rd32(E1000_RFCTL);
wr32(E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF);
rlpml = rd32(E1000_RLPML);