ixgbe: check for WoL support in single function
This patch consolidates the case logic for checking whether a device supports
WoL into a single place. Previously ethtool and probe used similar logic that
was copied and maintained separately. This patch encapsulates the core logic
into a function so that a user only has to update one place.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 7c4325ec..aa29edb 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -6598,7 +6598,7 @@
/* Turn off LRO if not RSC capable */
if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
features &= ~NETIF_F_LRO;
-
+
return features;
}
@@ -6786,6 +6786,57 @@
}
/**
+ * ixgbe_wol_supported - Check whether device supports WoL
+ * @hw: hw specific details
+ * @device_id: the device ID
+ * @subdev_id: the subsystem device ID
+ *
+ * This function is used by probe and ethtool to determine
+ * which devices have WoL support
+ *
+ **/
+int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
+ u16 subdevice_id)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u16 wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK;
+ int is_wol_supported = 0;
+
+ switch (device_id) {
+ case IXGBE_DEV_ID_82599_SFP:
+ /* Only these subdevices could supports WOL */
+ switch (subdevice_id) {
+ case IXGBE_SUBDEV_ID_82599_560FLR:
+ /* only support first port */
+ if (hw->bus.func != 0)
+ break;
+ case IXGBE_SUBDEV_ID_82599_SFP:
+ is_wol_supported = 1;
+ break;
+ }
+ break;
+ case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
+ /* All except this subdevice support WOL */
+ if (subdevice_id != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ)
+ is_wol_supported = 1;
+ break;
+ case IXGBE_DEV_ID_82599_KX4:
+ is_wol_supported = 1;
+ break;
+ case IXGBE_DEV_ID_X540T:
+ /* check eeprom to see if enabled wol */
+ if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) ||
+ ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) &&
+ (hw->bus.func == 0))) {
+ is_wol_supported = 1;
+ }
+ break;
+ }
+
+ return is_wol_supported;
+}
+
+/**
* ixgbe_probe - Device Initialization Routine
* @pdev: PCI device information struct
* @ent: entry in ixgbe_pci_tbl
@@ -6811,7 +6862,6 @@
u16 device_caps;
#endif
u32 eec;
- u16 wol_cap;
/* Catch broken hardware that put the wrong VF device ID in
* the PCIe SR-IOV capability.
@@ -7075,40 +7125,12 @@
netdev->features &= ~NETIF_F_RXHASH;
}
- /* WOL not supported for all but the following */
+ /* WOL not supported for all devices */
adapter->wol = 0;
- switch (pdev->device) {
- case IXGBE_DEV_ID_82599_SFP:
- /* Only these subdevice supports WOL */
- switch (pdev->subsystem_device) {
- case IXGBE_SUBDEV_ID_82599_560FLR:
- /* only support first port */
- if (hw->bus.func != 0)
- break;
- case IXGBE_SUBDEV_ID_82599_SFP:
- adapter->wol = IXGBE_WUFC_MAG;
- break;
- }
- break;
- case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
- /* All except this subdevice support WOL */
- if (pdev->subsystem_device != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ)
- adapter->wol = IXGBE_WUFC_MAG;
- break;
- case IXGBE_DEV_ID_82599_KX4:
+ hw->eeprom.ops.read(hw, 0x2c, &adapter->eeprom_cap);
+ if (ixgbe_wol_supported(adapter, pdev->device, pdev->subsystem_device))
adapter->wol = IXGBE_WUFC_MAG;
- break;
- case IXGBE_DEV_ID_X540T:
- /* Check eeprom to see if it is enabled */
- hw->eeprom.ops.read(hw, 0x2c, &adapter->eeprom_cap);
- wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK;
- if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) ||
- ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) &&
- (hw->bus.func == 0)))
- adapter->wol = IXGBE_WUFC_MAG;
- break;
- }
device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
/* save off EEPROM version number */