| /* |
| * arch/arm/mach-imx/mx1ads.c |
| * |
| * Initially based on: |
| * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c |
| * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de> |
| * |
| * 2004 (c) MontaVista Software, Inc. |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <asm/system.h> |
| #include <asm/hardware.h> |
| #include <asm/irq.h> |
| #include <asm/pgtable.h> |
| #include <asm/page.h> |
| |
| #include <asm/mach/map.h> |
| #include <asm/mach-types.h> |
| |
| #include <asm/mach/arch.h> |
| #include <asm/arch/mmc.h> |
| #include <asm/arch/imx-uart.h> |
| #include <linux/interrupt.h> |
| #include "generic.h" |
| |
| static struct resource cs89x0_resources[] = { |
| [0] = { |
| .start = IMX_CS4_PHYS + 0x300, |
| .end = IMX_CS4_PHYS + 0x300 + 16, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_GPIOC(17), |
| .end = IRQ_GPIOC(17), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device cs89x0_device = { |
| .name = "cirrus-cs89x0", |
| .num_resources = ARRAY_SIZE(cs89x0_resources), |
| .resource = cs89x0_resources, |
| }; |
| |
| static struct imxuart_platform_data uart_pdata = { |
| .flags = IMXUART_HAVE_RTSCTS, |
| }; |
| |
| static struct resource imx_uart1_resources[] = { |
| [0] = { |
| .start = 0x00206000, |
| .end = 0x002060FF, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = (UART1_MINT_RX), |
| .end = (UART1_MINT_RX), |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| .start = (UART1_MINT_TX), |
| .end = (UART1_MINT_TX), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device imx_uart1_device = { |
| .name = "imx-uart", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(imx_uart1_resources), |
| .resource = imx_uart1_resources, |
| .dev = { |
| .platform_data = &uart_pdata, |
| } |
| }; |
| |
| static struct resource imx_uart2_resources[] = { |
| [0] = { |
| .start = 0x00207000, |
| .end = 0x002070FF, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = (UART2_MINT_RX), |
| .end = (UART2_MINT_RX), |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| .start = (UART2_MINT_TX), |
| .end = (UART2_MINT_TX), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device imx_uart2_device = { |
| .name = "imx-uart", |
| .id = 1, |
| .num_resources = ARRAY_SIZE(imx_uart2_resources), |
| .resource = imx_uart2_resources, |
| .dev = { |
| .platform_data = &uart_pdata, |
| } |
| }; |
| |
| static struct platform_device *devices[] __initdata = { |
| &cs89x0_device, |
| &imx_uart1_device, |
| &imx_uart2_device, |
| }; |
| |
| #ifdef CONFIG_MMC_IMX |
| static int mx1ads_mmc_card_present(struct device *dev) |
| { |
| /* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */ |
| return (SSR(1) & (1 << 20) ? 0 : 1); |
| } |
| |
| static struct imxmmc_platform_data mx1ads_mmc_info = { |
| .card_present = mx1ads_mmc_card_present, |
| }; |
| #endif |
| |
| static void __init |
| mx1ads_init(void) |
| { |
| #ifdef CONFIG_LEDS |
| imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2); |
| #endif |
| #ifdef CONFIG_MMC_IMX |
| /* SD/MMC card detect */ |
| imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20); |
| imx_set_mmc_info(&mx1ads_mmc_info); |
| #endif |
| |
| imx_gpio_mode(PC9_PF_UART1_CTS); |
| imx_gpio_mode(PC10_PF_UART1_RTS); |
| imx_gpio_mode(PC11_PF_UART1_TXD); |
| imx_gpio_mode(PC12_PF_UART1_RXD); |
| |
| imx_gpio_mode(PB28_PF_UART2_CTS); |
| imx_gpio_mode(PB29_PF_UART2_RTS); |
| imx_gpio_mode(PB30_PF_UART2_TXD); |
| imx_gpio_mode(PB31_PF_UART2_RXD); |
| |
| platform_add_devices(devices, ARRAY_SIZE(devices)); |
| } |
| |
| static void __init |
| mx1ads_map_io(void) |
| { |
| imx_map_io(); |
| } |
| |
| MACHINE_START(MX1ADS, "Motorola MX1ADS") |
| /* Maintainer: Sascha Hauer, Pengutronix */ |
| .phys_io = 0x00200000, |
| .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, |
| .boot_params = 0x08000100, |
| .map_io = mx1ads_map_io, |
| .init_irq = imx_init_irq, |
| .timer = &imx_timer, |
| .init_machine = mx1ads_init, |
| MACHINE_END |