Merge branch 'for-linus2' of git://git.kernel.dk/linux-2.6-block
* 'for-linus2' of git://git.kernel.dk/linux-2.6-block:
pipe: fix check in "set size" fcntl
pipe: fix pipe buffer resizing
block: remove duplicate BUG_ON() in bd_finish_claiming()
block: bd_start_claiming cleanup
block: bd_start_claiming fix module refcount
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index a52a27c..6f80665 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -951,8 +951,6 @@
if (!save)
return 0;
- spin_lock_irqsave(&sachip->lock, flags);
-
/*
* Ensure that the SA1111 is still here.
* FIXME: shouldn't do this here.
@@ -969,6 +967,13 @@
* First of all, wake up the chip.
*/
sa1111_wake(sachip);
+
+ /*
+ * Only lock for write ops. Also, sa1111_wake must be called with
+ * released spinlock!
+ */
+ spin_lock_irqsave(&sachip->lock, flags);
+
sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
index 2c471fc..f035f41 100644
--- a/arch/arm/mach-nomadik/clock.c
+++ b/arch/arm/mach-nomadik/clock.c
@@ -32,7 +32,10 @@
}
EXPORT_SYMBOL(clk_disable);
-/* We have a fixed clock alone, for now */
+static struct clk clk_24 = {
+ .rate = 2400000,
+};
+
static struct clk clk_48 = {
.rate = 48 * 1000 * 1000,
};
@@ -50,6 +53,8 @@
}
static struct clk_lookup lookups[] = {
+ CLK(&clk_24, "mtu0"),
+ CLK(&clk_24, "mtu1"),
CLK(&clk_48, "uart0"),
CLK(&clk_48, "uart1"),
CLK(&clk_default, "gpio.0"),
@@ -59,10 +64,8 @@
CLK(&clk_default, "rng"),
};
-static int __init clk_init(void)
+int __init clk_init(void)
{
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
return 0;
}
-
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
index 5563985..78da2e7 100644
--- a/arch/arm/mach-nomadik/clock.h
+++ b/arch/arm/mach-nomadik/clock.h
@@ -11,3 +11,5 @@
struct clk {
unsigned long rate;
};
+
+int __init clk_init(void);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 91c3c90..ac58e3b 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -31,6 +31,8 @@
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
+#include "clock.h"
+
#define __MEM_4K_RESOURCE(x) \
.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
@@ -143,6 +145,12 @@
/* This modified VIC cell has two register blocks, at 0 and 0x20 */
vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START + 0, ~0, 0);
vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
+
+ /*
+ * Init clocks here so that they are available for system timer
+ * initialization.
+ */
+ clk_init();
}
/*
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 033b567..ce1104d 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -263,11 +263,11 @@
.keymap_size = ARRAY_SIZE(palmtc_matrix_keys),
};
-const static unsigned int palmtc_keypad_row_gpios[] = {
+static const unsigned int palmtc_keypad_row_gpios[] = {
0, 9, 10, 11
};
-const static unsigned int palmtc_keypad_col_gpios[] = {
+static const unsigned int palmtc_keypad_col_gpios[] = {
18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
};
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 4d2413e..c1048a3 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -818,6 +818,9 @@
.type = "max7310",
.addr = 0x18,
.platform_data = &akita_ioexp,
+ }, {
+ .type = "wm8750",
+ .addr = 0x1b,
},
};
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index c7bc419..4556aea 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -7,4 +7,5 @@
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o
obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o
obj-$(CONFIG_MACH_U5500) += board-u5500.o
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 6544855..fe84b90 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -16,6 +16,7 @@
#include <asm/clkdev.h>
+#include <plat/mtu.h>
#include <mach/hardware.h>
#include "clock.h"
@@ -59,6 +60,9 @@
#define PRCM_DMACLK_MGT 0x074
#define PRCM_B2R2CLK_MGT 0x078
#define PRCM_TVCLK_MGT 0x07C
+#define PRCM_TCR 0x1C8
+#define PRCM_TCR_STOPPED (1 << 16)
+#define PRCM_TCR_DOZE_MODE (1 << 17)
#define PRCM_UNIPROCLK_MGT 0x278
#define PRCM_SSPCLK_MGT 0x280
#define PRCM_RNGCLK_MGT 0x284
@@ -120,10 +124,95 @@
}
EXPORT_SYMBOL(clk_disable);
+/*
+ * The MTU has a separate, rather complex muxing setup
+ * with alternative parents (peripheral cluster or
+ * ULP or fixed 32768 Hz) depending on settings
+ */
+static unsigned long clk_mtu_get_rate(struct clk *clk)
+{
+ void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+ + PRCM_TCR;
+ u32 tcr = readl(addr);
+ int mtu = (int) clk->data;
+ /*
+ * One of these is selected eventually
+ * TODO: Replace the constant with a reference
+ * to the ULP source once this is modeled.
+ */
+ unsigned long clk32k = 32768;
+ unsigned long mturate;
+ unsigned long retclk;
+
+ /* Get the rate from the parent as a default */
+ if (clk->parent_periph)
+ mturate = clk_get_rate(clk->parent_periph);
+ else if (clk->parent_cluster)
+ mturate = clk_get_rate(clk->parent_cluster);
+ else
+ /* We need to be connected SOMEWHERE */
+ BUG();
+
+ /*
+ * Are we in doze mode?
+ * In this mode the parent peripheral or the fixed 32768 Hz
+ * clock is fed into the block.
+ */
+ if (!(tcr & PRCM_TCR_DOZE_MODE)) {
+ /*
+ * Here we're using the clock input from the APE ULP
+ * clock domain. But first: are the timers stopped?
+ */
+ if (tcr & PRCM_TCR_STOPPED) {
+ clk32k = 0;
+ mturate = 0;
+ } else {
+ /* Else default mode: 0 and 2.4 MHz */
+ clk32k = 0;
+ if (cpu_is_u5500())
+ /* DB5500 divides by 8 */
+ mturate /= 8;
+ else if (cpu_is_u8500ed()) {
+ /*
+ * This clocking setting must not be used
+ * in the ED chip, it is simply not
+ * connected anywhere!
+ */
+ mturate = 0;
+ BUG();
+ } else
+ /*
+ * In this mode the ulp38m4 clock is divided
+ * by a factor 16, on the DB8500 typically
+ * 38400000 / 16 ~ 2.4 MHz.
+ * TODO: Replace the constant with a reference
+ * to the ULP source once this is modeled.
+ */
+ mturate = 38400000 / 16;
+ }
+ }
+
+ /* Return the clock selected for this MTU */
+ if (tcr & (1 << mtu))
+ retclk = clk32k;
+ else
+ retclk = mturate;
+
+ pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
+ return retclk;
+}
+
unsigned long clk_get_rate(struct clk *clk)
{
unsigned long rate;
+ /*
+ * If there is a custom getrate callback for this clock,
+ * it will take precedence.
+ */
+ if (clk->get_rate)
+ return clk->get_rate(clk);
+
if (clk->ops && clk->ops->get_rate)
return clk->ops->get_rate(clk);
@@ -341,8 +430,9 @@
/* Peripheral Cluster #6 */
-static DEFINE_PRCC_CLK(6, mtu1_v1, 8, -1, NULL);
-static DEFINE_PRCC_CLK(6, mtu0_v1, 7, -1, NULL);
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0);
static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL);
static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL);
static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL);
@@ -357,8 +447,9 @@
/* Peripheral Cluster #7 */
static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL);
-static DEFINE_PRCC_CLK(7, mtu1_ed, 3, -1, NULL);
-static DEFINE_PRCC_CLK(7, mtu0_ed, 2, -1, NULL);
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0);
static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL);
static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL);
@@ -503,15 +594,17 @@
CLK(uiccclk, "uicc", NULL),
};
-static int __init clk_init(void)
+int __init clk_init(void)
{
if (cpu_is_u8500ed()) {
clk_prcmu_ops.enable = clk_prcmu_ed_enable;
clk_prcmu_ops.disable = clk_prcmu_ed_disable;
+ clk_per6clk.rate = 100000000;
} else if (cpu_is_u5500()) {
/* Clock tree for U5500 not implemented yet */
clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
+ clk_per6clk.rate = 26000000;
}
clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
@@ -522,4 +615,3 @@
return 0;
}
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
index e4f99b6..a058025 100644
--- a/arch/arm/mach-ux500/clock.h
+++ b/arch/arm/mach-ux500/clock.h
@@ -28,6 +28,9 @@
* @ops: pointer to clkops struct used to control this clock
* @name: name, for debugging
* @enabled: refcount. positive if enabled, zero if disabled
+ * @get_rate: custom callback for getting the clock rate
+ * @data: custom per-clock data for example for the get_rate
+ * callback
* @rate: fixed rate for clocks which don't implement
* ops->getrate
* @prcmu_cg_off: address offset of the combined enable/disable register
@@ -67,6 +70,8 @@
const struct clkops *ops;
const char *name;
unsigned int enabled;
+ unsigned long (*get_rate)(struct clk *);
+ void *data;
unsigned long rate;
struct list_head list;
@@ -117,9 +122,26 @@
.parent_periph = _kernclk \
}
+#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
+struct clk clk_##_name = { \
+ .name = #_name, \
+ .ops = &clk_prcc_ops, \
+ .cluster = _pclust, \
+ .prcc_bus = _bus_en, \
+ .prcc_kernel = _kernel_en, \
+ .parent_cluster = &clk_per##_pclust##clk, \
+ .parent_periph = _kernclk, \
+ .get_rate = _callback, \
+ .data = (void *) _data \
+ }
+
+
#define CLK(_clk, _devname, _conname) \
{ \
.clk = &clk_##_clk, \
.dev_id = _devname, \
.con_id = _conname, \
}
+
+int __init clk_db8500_ed_fixup(void);
+int __init clk_init(void);
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index d81ad02..e0fd747 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -62,6 +62,12 @@
{
gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29);
gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
+
+ /*
+ * Init clocks here so that they are available for system timer
+ * initialization.
+ */
+ clk_init();
}
#ifdef CONFIG_CACHE_L2X0
diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c
index 5eb4fd9..ac163de 100644
--- a/arch/arm/mm/copypage-feroceon.c
+++ b/arch/arm/mm/copypage-feroceon.c
@@ -18,7 +18,7 @@
{
asm("\
stmfd sp!, {r4-r9, lr} \n\
- mov ip, %0 \n\
+ mov ip, %2 \n\
1: mov lr, r1 \n\
ldmia r1!, {r2 - r9} \n\
pld [lr, #32] \n\
@@ -64,7 +64,7 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB\n\
ldmfd sp!, {r4-r9, pc}"
:
- : "I" (PAGE_SIZE));
+ : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE));
}
void feroceon_copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c
index 7c2eb55..cb589cb 100644
--- a/arch/arm/mm/copypage-v4wb.c
+++ b/arch/arm/mm/copypage-v4wb.c
@@ -27,7 +27,7 @@
{
asm("\
stmfd sp!, {r4, lr} @ 2\n\
- mov r2, %0 @ 1\n\
+ mov r2, %2 @ 1\n\
ldmia r1!, {r3, r4, ip, lr} @ 4\n\
1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\
stmia r0!, {r3, r4, ip, lr} @ 4\n\
@@ -44,7 +44,7 @@
mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB\n\
ldmfd sp!, {r4, pc} @ 3"
:
- : "I" (PAGE_SIZE / 64));
+ : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
}
void v4wb_copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c
index 172e6a5..30c7d04 100644
--- a/arch/arm/mm/copypage-v4wt.c
+++ b/arch/arm/mm/copypage-v4wt.c
@@ -25,7 +25,7 @@
{
asm("\
stmfd sp!, {r4, lr} @ 2\n\
- mov r2, %0 @ 1\n\
+ mov r2, %2 @ 1\n\
ldmia r1!, {r3, r4, ip, lr} @ 4\n\
1: stmia r0!, {r3, r4, ip, lr} @ 4\n\
ldmia r1!, {r3, r4, ip, lr} @ 4+1\n\
@@ -40,7 +40,7 @@
mcr p15, 0, r2, c7, c7, 0 @ flush ID cache\n\
ldmfd sp!, {r4, pc} @ 3"
:
- : "I" (PAGE_SIZE / 64));
+ : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
}
void v4wt_copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c
index 747ad41..f9cde07 100644
--- a/arch/arm/mm/copypage-xsc3.c
+++ b/arch/arm/mm/copypage-xsc3.c
@@ -34,7 +34,7 @@
{
asm("\
stmfd sp!, {r4, r5, lr} \n\
- mov lr, %0 \n\
+ mov lr, %2 \n\
\n\
pld [r1, #0] \n\
pld [r1, #32] \n\
@@ -67,7 +67,7 @@
\n\
ldmfd sp!, {r4, r5, pc}"
:
- : "I" (PAGE_SIZE / 64 - 1));
+ : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64 - 1));
}
void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 92f5801..cbfb2ed 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -393,6 +393,9 @@
if (addr < TASK_SIZE)
return do_page_fault(addr, fsr, regs);
+ if (user_mode(regs))
+ goto bad_area;
+
index = pgd_index(addr);
/*
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 77b030f..086816b 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -48,7 +48,16 @@
debug_kmap_atomic(type);
- kmap = kmap_high_get(page);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ /*
+ * There is no cache coherency issue when non VIVT, so force the
+ * dedicated kmap usage for better debugging purposes in that case.
+ */
+ if (!cache_is_vivt())
+ kmap = NULL;
+ else
+#endif
+ kmap = kmap_high_get(page);
if (kmap)
return kmap;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 1ba6cf5..f6a9994 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -678,10 +678,10 @@
void free_initmem(void)
{
#ifdef CONFIG_HAVE_TCM
- extern char *__tcm_start, *__tcm_end;
+ extern char __tcm_start, __tcm_end;
- totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)),
- __phys_to_pfn(__pa(__tcm_end)),
+ totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)),
+ __phys_to_pfn(__pa(&__tcm_end)),
"TCM link");
#endif
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 0ff3798..08aaa4a 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -13,7 +13,9 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/clockchips.h>
+#include <linux/clk.h>
#include <linux/jiffies.h>
+#include <linux/err.h>
#include <asm/mach/time.h>
#include <plat/mtu.h>
@@ -124,13 +126,25 @@
void __init nmdk_timer_init(void)
{
unsigned long rate;
- u32 cr = MTU_CRn_32BITS;;
+ struct clk *clk0;
+ struct clk *clk1;
+ u32 cr;
+
+ clk0 = clk_get_sys("mtu0", NULL);
+ BUG_ON(IS_ERR(clk0));
+
+ clk1 = clk_get_sys("mtu1", NULL);
+ BUG_ON(IS_ERR(clk1));
+
+ clk_enable(clk0);
+ clk_enable(clk1);
/*
* Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
* use a divide-by-16 counter if it's more than 16MHz
*/
- rate = CLOCK_TICK_RATE;
+ cr = MTU_CRn_32BITS;;
+ rate = clk_get_rate(clk0);
if (rate > 16 << 20) {
rate /= 16;
cr |= MTU_CRn_PRESCALE_16;
@@ -153,6 +167,14 @@
nmdk_clksrc.name);
/* Timer 1 is used for events, fix according to rate */
+ cr = MTU_CRn_32BITS;
+ rate = clk_get_rate(clk1);
+ if (rate > 16 << 20) {
+ rate /= 16;
+ cr |= MTU_CRn_PRESCALE_16;
+ } else {
+ cr |= MTU_CRn_PRESCALE_1;
+ }
writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
nmdk_clkevt.max_delta_ns =
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 66dc2d0..d66cead 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -277,7 +277,7 @@
#ifdef CONFIG_VFPv3
@ d16 - d31 registers
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1: mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr
+1: mcrr p11, 3, r0, r1, c\dr @ fmdrr r0, r1, d\dr
mov pc, lr
.org 1b + 8
.endr
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 2c9e522..7fd90d0 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -1077,7 +1077,7 @@
index = ENTRIES-1;
/* make sure index is valid */
- if ((index > ENTRIES) || (index < 0))
+ if ((index >= ENTRIES) || (index < 0))
index = ENTRIES-1;
return initial_lfsr[index];
diff --git a/include/trace/events/signal.h b/include/trace/events/signal.h
index 814566c..17df434 100644
--- a/include/trace/events/signal.h
+++ b/include/trace/events/signal.h
@@ -10,7 +10,8 @@
#define TP_STORE_SIGINFO(__entry, info) \
do { \
- if (info == SEND_SIG_NOINFO) { \
+ if (info == SEND_SIG_NOINFO || \
+ info == SEND_SIG_FORCED) { \
__entry->errno = 0; \
__entry->code = SI_USER; \
} else if (info == SEND_SIG_PRIV) { \
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 31d6afe..ff86c55 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -1507,6 +1507,9 @@
divisor = nsec * frequency;
}
+ if (!divisor)
+ return dividend;
+
return div64_u64(dividend, divisor);
}
@@ -1529,7 +1532,7 @@
static void perf_adjust_period(struct perf_event *event, u64 nsec, u64 count)
{
struct hw_perf_event *hwc = &event->hw;
- u64 period, sample_period;
+ s64 period, sample_period;
s64 delta;
period = perf_calculate_period(event, nsec, count);
diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c
index 428121a..10c3a87 100644
--- a/sound/atmel/ac97c.c
+++ b/sound/atmel/ac97c.c
@@ -657,7 +657,7 @@
if (sr & AC97C_SR_CAEVT) {
struct snd_pcm_runtime *runtime;
int offset, next_period, block_size;
- dev_info(&chip->pdev->dev, "channel A event%s%s%s%s%s%s\n",
+ dev_dbg(&chip->pdev->dev, "channel A event%s%s%s%s%s%s\n",
casr & AC97C_CSR_OVRUN ? " OVRUN" : "",
casr & AC97C_CSR_RXRDY ? " RXRDY" : "",
casr & AC97C_CSR_UNRUN ? " UNRUN" : "",
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index d792cdd..fc767b6 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9477,6 +9477,9 @@
SND_PCI_QUIRK(0x106b, 0x2800, "AppleTV", ALC885_IMAC24),
SND_PCI_QUIRK(0x106b, 0x2c00, "MacbookPro rev3", ALC885_MBP3),
SND_PCI_QUIRK(0x106b, 0x3000, "iMac", ALC889A_MB31),
+ SND_PCI_QUIRK(0x106b, 0x3200, "iMac 7,1 Aluminum", ALC882_ASUS_A7M),
+ SND_PCI_QUIRK(0x106b, 0x3400, "MacBookAir 1,1", ALC885_MBP3),
+ SND_PCI_QUIRK(0x106b, 0x3500, "MacBookAir 2,1", ALC885_MBA21),
SND_PCI_QUIRK(0x106b, 0x3600, "Macbook 3,1", ALC889A_MB31),
SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3),
SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24),
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index 1941a35..d256f5f 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -328,38 +328,6 @@
.codec_dev = &soc_codec_dev_wm8750,
};
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8750 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8750_i2c_register(void)
-{
- struct i2c_board_info info;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = 0x1b;
- strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
-
- adapter = i2c_get_adapter(0);
- if (!adapter) {
- printk(KERN_ERR "can't get i2c adapter 0\n");
- return -ENODEV;
- }
-
- client = i2c_new_device(adapter, &info);
- i2c_put_adapter(adapter);
- if (!client) {
- printk(KERN_ERR "can't add i2c device at 0x%x\n",
- (unsigned int)info.addr);
- return -ENODEV;
- }
-
- return 0;
-}
-
static struct platform_device *spitz_snd_device;
static int __init spitz_init(void)
@@ -369,10 +337,6 @@
if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita()))
return -ENODEV;
- ret = wm8750_i2c_setup();
- if (ret != 0)
- return ret;
-
spitz_snd_device = platform_device_alloc("soc-audio", -1);
if (!spitz_snd_device)
return -ENOMEM;
diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
index 4c7b051..1bc56b2 100644
--- a/sound/spi/at73c213.c
+++ b/sound/spi/at73c213.c
@@ -69,7 +69,6 @@
int irq;
int period;
unsigned long bitrate;
- struct clk *bitclk;
struct ssc_device *ssc;
struct spi_device *spi;
u8 spi_wbuffer[2];
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 7fd6b15..b63e571 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -1745,7 +1745,12 @@
if (symbol_conf.vmlinux_name != NULL) {
err = dso__load_vmlinux(self, map,
symbol_conf.vmlinux_name, filter);
- goto out_try_fixup;
+ if (err > 0) {
+ dso__set_long_name(self,
+ strdup(symbol_conf.vmlinux_name));
+ goto out_fixup;
+ }
+ return err;
}
if (vmlinux_path != NULL) {
@@ -1806,7 +1811,6 @@
pr_debug("Using %s for symbols\n", kallsyms_filename);
free(kallsyms_allocated_filename);
-out_try_fixup:
if (err > 0) {
out_fixup:
if (kallsyms_filename != NULL)