IB/mlx4: Fix SL to 802.1Q priority-bits mapping for IBoE
For IBoE, SLs 0-7 are mapped to Ethernet 802.1Q user priority bits
(pbits) which are part of the VLAN tag, SLs 8-15 are reserved.
Under Ethernet, the ConnectX firmware treats (decode/encode) the four
bit SL field in various constructs such as QPC / UD WQE / CQE as PPP0
and not as 0PPP. This correlates well to the fact that within the
vlan tag the pbits are located in bits 15-13 and not 12-14.
The current code wasn't consistent around that area - the
encoding was correct for the IBoE QPC.path.schedule_queue field,
but was wrong for IBoE CQEs and when MLX header was built.
These inconsistencies resulted in wrong SL <--> wire 802.1Q pbits
mapping, which is fixed by using SL <--> PPP0 all around the place.
Signed-off-by: Oren Duer <oren@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
diff --git a/drivers/infiniband/hw/mlx4/ah.c b/drivers/infiniband/hw/mlx4/ah.c
index 4b8f9c4..a251bec 100644
--- a/drivers/infiniband/hw/mlx4/ah.c
+++ b/drivers/infiniband/hw/mlx4/ah.c
@@ -126,7 +126,7 @@
ah->av.ib.dlid = cpu_to_be16(0xc000);
memcpy(ah->av.eth.dgid, ah_attr->grh.dgid.raw, 16);
- ah->av.eth.sl_tclass_flowlabel = cpu_to_be32(ah_attr->sl << 28);
+ ah->av.eth.sl_tclass_flowlabel = cpu_to_be32(ah_attr->sl << 29);
return &ah->ibah;
}
diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index e8df155..5ecf38d 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -715,13 +715,17 @@
}
wc->slid = be16_to_cpu(cqe->rlid);
- wc->sl = be16_to_cpu(cqe->sl_vid) >> 12;
g_mlpath_rqpn = be32_to_cpu(cqe->g_mlpath_rqpn);
wc->src_qp = g_mlpath_rqpn & 0xffffff;
wc->dlid_path_bits = (g_mlpath_rqpn >> 24) & 0x7f;
wc->wc_flags |= g_mlpath_rqpn & 0x80000000 ? IB_WC_GRH : 0;
wc->pkey_index = be32_to_cpu(cqe->immed_rss_invalid) & 0x7f;
wc->csum_ok = mlx4_ib_ipoib_csum_ok(cqe->status, cqe->checksum);
+ if (rdma_port_get_link_layer(wc->qp->device,
+ (*cur_qp)->port) == IB_LINK_LAYER_ETHERNET)
+ wc->sl = be16_to_cpu(cqe->sl_vid) >> 13;
+ else
+ wc->sl = be16_to_cpu(cqe->sl_vid) >> 12;
}
return 0;
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index a16f0c8..aa2aefa 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -962,7 +962,7 @@
if (is_eth) {
path->sched_queue = MLX4_IB_DEFAULT_SCHED_QUEUE |
- ((port - 1) << 6) | ((ah->sl & 7) << 3) | ((ah->sl & 8) >> 1);
+ ((port - 1) << 6) | ((ah->sl & 7) << 3);
if (!(ah->ah_flags & IB_AH_GRH))
return -1;
@@ -1437,7 +1437,7 @@
u16 pcp;
sqp->ud_header.vlan.type = cpu_to_be16(MLX4_IB_IBOE_ETHERTYPE);
- pcp = (be32_to_cpu(ah->av.ib.sl_tclass_flowlabel) >> 27 & 3) << 13;
+ pcp = (be32_to_cpu(ah->av.ib.sl_tclass_flowlabel) >> 29) << 13;
sqp->ud_header.vlan.tag = cpu_to_be16(vlan | pcp);
}
} else {