serial: sh-sci: Fix up pretty name printing for port IRQs.
Presently these were all using the same static string with no regard to
dev_name() and the like. This implements a bit of rework to name the IRQ
dynamically, as it should have been doing all along anyways.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 9c8624d..d0a5623 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -71,6 +71,8 @@
/* Function clock */
struct clk *fclk;
+ char *irqstr[SCIx_NR_IRQS];
+
struct dma_chan *chan_tx;
struct dma_chan *chan_rx;
@@ -954,53 +956,102 @@
return NOTIFY_OK;
}
+static struct sci_irq_desc {
+ const char *desc;
+ irq_handler_t handler;
+} sci_irq_desc[] = {
+ /*
+ * Split out handlers, the default case.
+ */
+ [SCIx_ERI_IRQ] = {
+ .desc = "rx err",
+ .handler = sci_er_interrupt,
+ },
+
+ [SCIx_RXI_IRQ] = {
+ .desc = "rx full",
+ .handler = sci_rx_interrupt,
+ },
+
+ [SCIx_TXI_IRQ] = {
+ .desc = "tx empty",
+ .handler = sci_tx_interrupt,
+ },
+
+ [SCIx_BRI_IRQ] = {
+ .desc = "break",
+ .handler = sci_br_interrupt,
+ },
+
+ /*
+ * Special muxed handler.
+ */
+ [SCIx_MUX_IRQ] = {
+ .desc = "mux",
+ .handler = sci_mpxed_interrupt,
+ },
+};
+
static int sci_request_irq(struct sci_port *port)
{
- int i;
- irqreturn_t (*handlers[4])(int irq, void *ptr) = {
- sci_er_interrupt, sci_rx_interrupt, sci_tx_interrupt,
- sci_br_interrupt,
- };
- const char *desc[] = { "SCI Receive Error", "SCI Receive Data Full",
- "SCI Transmit Data Empty", "SCI Break" };
+ struct uart_port *up = &port->port;
+ int i, j, ret = 0;
- if (port->cfg->irqs[0] == port->cfg->irqs[1]) {
- if (unlikely(!port->cfg->irqs[0]))
- return -ENODEV;
+ for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
+ struct sci_irq_desc *desc;
+ unsigned int irq;
- if (request_irq(port->cfg->irqs[0], sci_mpxed_interrupt,
- IRQF_DISABLED, "sci", port)) {
- dev_err(port->port.dev, "Can't allocate IRQ\n");
- return -ENODEV;
+ if (SCIx_IRQ_IS_MUXED(port)) {
+ i = SCIx_MUX_IRQ;
+ irq = up->irq;
+ } else
+ irq = port->cfg->irqs[i];
+
+ desc = sci_irq_desc + i;
+ port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s",
+ dev_name(up->dev), desc->desc);
+ if (!port->irqstr[j]) {
+ dev_err(up->dev, "Failed to allocate %s IRQ string\n",
+ desc->desc);
+ goto out_nomem;
}
- } else {
- for (i = 0; i < ARRAY_SIZE(handlers); i++) {
- if (unlikely(!port->cfg->irqs[i]))
- continue;
- if (request_irq(port->cfg->irqs[i], handlers[i],
- IRQF_DISABLED, desc[i], port)) {
- dev_err(port->port.dev, "Can't allocate IRQ\n");
- return -ENODEV;
- }
+ ret = request_irq(irq, desc->handler, up->irqflags,
+ port->irqstr[j], port);
+ if (unlikely(ret)) {
+ dev_err(up->dev, "Can't allocate %s IRQ\n", desc->desc);
+ goto out_noirq;
}
}
return 0;
+
+out_noirq:
+ while (--i >= 0)
+ free_irq(port->cfg->irqs[i], port);
+
+out_nomem:
+ while (--j >= 0)
+ kfree(port->irqstr[j]);
+
+ return ret;
}
static void sci_free_irq(struct sci_port *port)
{
int i;
- if (port->cfg->irqs[0] == port->cfg->irqs[1])
- free_irq(port->cfg->irqs[0], port);
- else {
- for (i = 0; i < ARRAY_SIZE(port->cfg->irqs); i++) {
- if (!port->cfg->irqs[i])
- continue;
+ /*
+ * Intentionally in reverse order so we iterate over the muxed
+ * IRQ first.
+ */
+ for (i = 0; i < SCIx_NR_IRQS; i++) {
+ free_irq(port->cfg->irqs[i], port);
+ kfree(port->irqstr[i]);
- free_irq(port->cfg->irqs[i], port);
+ if (SCIx_IRQ_IS_MUXED(port)) {
+ /* If there's only one IRQ, we're done. */
+ return;
}
}
}
@@ -1910,6 +1961,7 @@
* For the muxed case there's nothing more to do.
*/
port->irq = p->irqs[SCIx_RXI_IRQ];
+ port->irqflags = IRQF_DISABLED;
port->serial_in = sci_serial_in;
port->serial_out = sci_serial_out;