e1000e: enable support for new device IDs
The device IDs 0x15a0 and 0x15a1 are new SKUs that contain the same MAC as
I217 and same PHY as I218.
The device IDs 0x15a2 and 0x15a3 are the same as existing I218 SKUs.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index b56c61a..78d03d3 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1028,7 +1028,9 @@
/* Work-around I218 hang issue */
if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
- (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM3) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V3)) {
ret_val = e1000_k1_workaround_lpt_lp(hw, link);
if (ret_val)
return ret_val;
@@ -4203,7 +4205,9 @@
u16 phy_reg, device_id = hw->adapter->pdev->device;
if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
- (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
+ (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V) ||
+ (device_id == E1000_DEV_ID_PCH_I218_LM3) ||
+ (device_id == E1000_DEV_ID_PCH_I218_V3)) {
u32 fextnvm6 = er32(FEXTNVM6);
ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);