RDMA/iw_cxgb4: set the correct FID value in DSGL commands
The FID value in a ULP_MEMIO command needs to be set to an IQ ID of
a queue configured for our PF. The FID/IQ id is used to index into the
PCIE FID table, to find out on which function the DMA needs to be
issued. Essentially, every DMA needs to have the ingress queue. The exact
ingress queue doesn't matter, but it needs to be an ingress queue
associated with the function you want to see the DMA on.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c
index 008be07..d495675 100644
--- a/drivers/infiniband/hw/cxgb4/mem.c
+++ b/drivers/infiniband/hw/cxgb4/mem.c
@@ -86,8 +86,9 @@
(wait ? FW_WR_COMPL_F : 0));
req->wr.wr_lo = wait ? (__force __be64)(unsigned long) &wr_wait : 0L;
req->wr.wr_mid = cpu_to_be32(FW_WR_LEN16_V(DIV_ROUND_UP(wr_len, 16)));
- req->cmd = cpu_to_be32(ULPTX_CMD_V(ULP_TX_MEM_WRITE));
- req->cmd |= cpu_to_be32(T5_ULP_MEMIO_ORDER_V(1));
+ req->cmd = cpu_to_be32(ULPTX_CMD_V(ULP_TX_MEM_WRITE) |
+ T5_ULP_MEMIO_ORDER_V(1) |
+ T5_ULP_MEMIO_FID_V(rdev->lldi.rxq_ids[0]));
req->dlen = cpu_to_be32(ULP_MEMIO_DATA_LEN_V(len>>5));
req->len16 = cpu_to_be32(DIV_ROUND_UP(wr_len-sizeof(req->wr), 16));
req->lock_addr = cpu_to_be32(ULP_MEMIO_ADDR_V(addr));