usb: dwc2: Update the gadget driver to use common dwc2_hsotg structure
Adds the gadget data structure and appropriate data structure pointers
to the common dwc2_hsotg data structure. To keep the driver data
dereference code looking clean, the gadget variable declares are only available
for peripheral and dual-role mode. This is needed so that the dwc2_hsotg data
structure can be used by the hcd and gadget drivers.
Updates gadget.c to use the dwc2_hsotg data structure and gadget pointers
that have been moved into the common dwc2_hsotg structure.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 55c90c5..7bcdc10 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -84,7 +84,7 @@
*/
#define EP0_MPS_LIMIT 64
-struct s3c_hsotg;
+struct dwc2_hsotg;
struct s3c_hsotg_req;
/**
@@ -130,7 +130,7 @@
struct s3c_hsotg_ep {
struct usb_ep ep;
struct list_head queue;
- struct s3c_hsotg *parent;
+ struct dwc2_hsotg *parent;
struct s3c_hsotg_req *req;
struct dentry *debugfs;
@@ -155,67 +155,6 @@
};
/**
- * struct s3c_hsotg - driver state.
- * @dev: The parent device supplied to the probe function
- * @driver: USB gadget driver
- * @phy: The otg phy transceiver structure for phy control.
- * @uphy: The otg phy transceiver structure for old USB phy control.
- * @plat: The platform specific configuration data. This can be removed once
- * all SoCs support usb transceiver.
- * @regs: The memory area mapped for accessing registers.
- * @irq: The IRQ number we are using
- * @supplies: Definition of USB power supplies
- * @phyif: PHY interface width
- * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
- * @num_of_eps: Number of available EPs (excluding EP0)
- * @debug_root: root directrory for debugfs.
- * @debug_file: main status file for debugfs.
- * @debug_fifo: FIFO status file for debugfs.
- * @ep0_reply: Request used for ep0 reply.
- * @ep0_buff: Buffer for EP0 reply data, if needed.
- * @ctrl_buff: Buffer for EP0 control requests.
- * @ctrl_req: Request for EP0 control packets.
- * @setup: NAK management for EP0 SETUP
- * @last_rst: Time of last reset
- * @eps: The endpoints being supplied to the gadget framework
- */
-struct s3c_hsotg {
- struct device *dev;
- struct usb_gadget_driver *driver;
- struct phy *phy;
- struct usb_phy *uphy;
- struct s3c_hsotg_plat *plat;
-
- spinlock_t lock;
-
- void __iomem *regs;
- int irq;
- struct clk *clk;
-
- struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
-
- u32 phyif;
- int fifo_mem;
- unsigned int dedicated_fifos:1;
- unsigned char num_of_eps;
- u32 fifo_map;
-
- struct dentry *debug_root;
- struct dentry *debug_file;
- struct dentry *debug_fifo;
-
- struct usb_request *ep0_reply;
- struct usb_request *ctrl_req;
- u8 ep0_buff[8];
- u8 ctrl_buff[8];
-
- struct usb_gadget gadget;
- unsigned int setup;
- unsigned long last_rst;
- struct s3c_hsotg_ep *eps;
-};
-
-/**
* struct s3c_hsotg_req - data transfer request
* @req: The USB gadget request
* @queue: The list of requests for the endpoint this is queued for.
@@ -229,6 +168,7 @@
unsigned char mapped;
};
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
#define call_gadget(_hs, _entry) \
do { \
if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \
@@ -238,6 +178,9 @@
spin_lock(&_hs->lock); \
} \
} while (0)
+#else
+#define call_gadget(_hs, _entry) do {} while (0)
+#endif
struct dwc2_hsotg;
struct dwc2_host_chan;
@@ -495,11 +438,13 @@
* struct dwc2_hsotg - Holds the state of the driver, including the non-periodic
* and periodic schedules
*
+ * These are common for both host and peripheral modes:
+ *
* @dev: The struct device pointer
* @regs: Pointer to controller regs
- * @core_params: Parameters that define how the core should be configured
* @hw_params: Parameters that were autodetected from the
* hardware registers
+ * @core_params: Parameters that define how the core should be configured
* @op_state: The operational State, during transitions (a_host=>
* a_peripheral and b_device=>b_host) this may not match
* the core, but allows the software to determine
@@ -508,6 +453,8 @@
* - USB_DR_MODE_PERIPHERAL
* - USB_DR_MODE_HOST
* - USB_DR_MODE_OTG
+ * @lock: Spinlock that protects all the driver data structures
+ * @priv: Stores a pointer to the struct usb_hcd
* @queuing_high_bandwidth: True if multiple packets of a high-bandwidth
* transfer are in process of being queued
* @srp_success: Stores status of SRP request in the case of a FS PHY
@@ -517,6 +464,9 @@
* interrupt
* @wkp_timer: Timer object for handling Wakeup Detected interrupt
* @lx_state: Lx state of connected device
+ *
+ * These are for host mode:
+ *
* @flags: Flags for handling root port state changes
* @non_periodic_sched_inactive: Inactive QHs in the non-periodic schedule.
* Transfers associated with these QHs are not currently
@@ -585,11 +535,31 @@
* @status_buf_dma: DMA address for status_buf
* @start_work: Delayed work for handling host A-cable connection
* @reset_work: Delayed work for handling a port reset
- * @lock: Spinlock that protects all the driver data structures
- * @priv: Stores a pointer to the struct usb_hcd
* @otg_port: OTG port number
* @frame_list: Frame list
* @frame_list_dma: Frame list DMA address
+ *
+ * These are for peripheral mode:
+ *
+ * @driver: USB gadget driver
+ * @phy: The otg phy transceiver structure for phy control.
+ * @uphy: The otg phy transceiver structure for old USB phy control.
+ * @plat: The platform specific configuration data. This can be removed once
+ * all SoCs support usb transceiver.
+ * @supplies: Definition of USB power supplies
+ * @phyif: PHY interface width
+ * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
+ * @num_of_eps: Number of available EPs (excluding EP0)
+ * @debug_root: Root directrory for debugfs.
+ * @debug_file: Main status file for debugfs.
+ * @debug_fifo: FIFO status file for debugfs.
+ * @ep0_reply: Request used for ep0 reply.
+ * @ep0_buff: Buffer for EP0 reply data, if needed.
+ * @ctrl_buff: Buffer for EP0 control requests.
+ * @ctrl_req: Request for EP0 control packets.
+ * @setup: NAK management for EP0 SETUP
+ * @last_rst: Time of last reset
+ * @eps: The endpoints being supplied to the gadget framework
*/
struct dwc2_hsotg {
struct device *dev;
@@ -601,6 +571,15 @@
enum usb_otg_state op_state;
enum usb_dr_mode dr_mode;
+ struct phy *phy;
+ struct usb_phy *uphy;
+ struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
+
+ spinlock_t lock;
+ void *priv;
+ int irq;
+ struct clk *clk;
+
unsigned int queuing_high_bandwidth:1;
unsigned int srp_success:1;
@@ -609,6 +588,18 @@
struct timer_list wkp_timer;
enum dwc2_lx_state lx_state;
+ struct dentry *debug_root;
+ struct dentry *debug_file;
+ struct dentry *debug_fifo;
+
+ /* DWC OTG HW Release versions */
+#define DWC2_CORE_REV_2_71a 0x4f54271a
+#define DWC2_CORE_REV_2_90a 0x4f54290a
+#define DWC2_CORE_REV_2_92a 0x4f54292a
+#define DWC2_CORE_REV_2_94a 0x4f54294a
+#define DWC2_CORE_REV_3_00a 0x4f54300a
+
+#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
union dwc2_hcd_internal_flags {
u32 d32;
struct {
@@ -655,19 +646,10 @@
struct delayed_work start_work;
struct delayed_work reset_work;
- spinlock_t lock;
- void *priv;
u8 otg_port;
u32 *frame_list;
dma_addr_t frame_list_dma;
- /* DWC OTG HW Release versions */
-#define DWC2_CORE_REV_2_71a 0x4f54271a
-#define DWC2_CORE_REV_2_90a 0x4f54290a
-#define DWC2_CORE_REV_2_92a 0x4f54292a
-#define DWC2_CORE_REV_2_94a 0x4f54294a
-#define DWC2_CORE_REV_3_00a 0x4f54300a
-
#ifdef DEBUG
u32 frrem_samples;
u64 frrem_accum;
@@ -686,6 +668,29 @@
u32 hfnum_other_samples_b;
u64 hfnum_other_frrem_accum_b;
#endif
+#endif /* CONFIG_USB_DWC2_HOST || CONFIG_USB_DWC2_DUAL_ROLE */
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+ /* Gadget structures */
+ struct usb_gadget_driver *driver;
+ struct s3c_hsotg_plat *plat;
+
+ u32 phyif;
+ int fifo_mem;
+ unsigned int dedicated_fifos:1;
+ unsigned char num_of_eps;
+ u32 fifo_map;
+
+ struct usb_request *ep0_reply;
+ struct usb_request *ctrl_req;
+ u8 ep0_buff[8];
+ u8 ctrl_buff[8];
+
+ struct usb_gadget gadget;
+ unsigned int setup;
+ unsigned long last_rst;
+ struct s3c_hsotg_ep *eps;
+#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
};
/* Reasons for halting a host channel */