powerpc/mm/book3s: Rename hash specific PTE bits to carry H_ prefix

This helps to make following hash only pte bits easier.

We have kept _PAGE_CHG_MASK, _HPAGE_CHG_MASK and _PAGE_PROT_BITS as it
is in this patch eventhough they use hash specific bits. Using them in
radix as it is should be ok, because with radix we expect those bit
positions to be zero.

Only renames in this patch, no change in functionality.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
diff --git a/arch/powerpc/mm/hash64_64k.c b/arch/powerpc/mm/hash64_64k.c
index 6753310..16644e1 100644
--- a/arch/powerpc/mm/hash64_64k.c
+++ b/arch/powerpc/mm/hash64_64k.c
@@ -23,7 +23,7 @@
 	unsigned long g_idx;
 	unsigned long ptev = pte_val(rpte.pte);
 
-	g_idx = (ptev & _PAGE_COMBO_VALID) >> _PAGE_F_GIX_SHIFT;
+	g_idx = (ptev & H_PAGE_COMBO_VALID) >> H_PAGE_F_GIX_SHIFT;
 	index = index >> 2;
 	if (g_idx & (0x1 << index))
 		return true;
@@ -37,12 +37,12 @@
 {
 	unsigned long g_idx;
 
-	if (!(ptev & _PAGE_COMBO))
+	if (!(ptev & H_PAGE_COMBO))
 		return ptev;
 	index = index >> 2;
 	g_idx = 0x1 << index;
 
-	return ptev | (g_idx << _PAGE_F_GIX_SHIFT);
+	return ptev | (g_idx << H_PAGE_F_GIX_SHIFT);
 }
 
 int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
@@ -66,7 +66,7 @@
 
 		old_pte = pte_val(pte);
 		/* If PTE busy, retry the access */
-		if (unlikely(old_pte & _PAGE_BUSY))
+		if (unlikely(old_pte & H_PAGE_BUSY))
 			return 0;
 		/* If PTE permissions don't match, take page fault */
 		if (unlikely(!check_pte_access(access, old_pte)))
@@ -74,9 +74,9 @@
 		/*
 		 * Try to lock the PTE, add ACCESSED and DIRTY if it was
 		 * a write access. Since this is 4K insert of 64K page size
-		 * also add _PAGE_COMBO
+		 * also add H_PAGE_COMBO
 		 */
-		new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED | _PAGE_COMBO;
+		new_pte = old_pte | H_PAGE_BUSY | _PAGE_ACCESSED | H_PAGE_COMBO;
 		if (access & _PAGE_WRITE)
 			new_pte |= _PAGE_DIRTY;
 	} while (!pte_xchg(ptep, __pte(old_pte), __pte(new_pte)));
@@ -103,21 +103,21 @@
 	/*
 	 *None of the sub 4k page is hashed
 	 */
-	if (!(old_pte & _PAGE_HASHPTE))
+	if (!(old_pte & H_PAGE_HASHPTE))
 		goto htab_insert_hpte;
 	/*
 	 * Check if the pte was already inserted into the hash table
 	 * as a 64k HW page, and invalidate the 64k HPTE if so.
 	 */
-	if (!(old_pte & _PAGE_COMBO)) {
+	if (!(old_pte & H_PAGE_COMBO)) {
 		flush_hash_page(vpn, rpte, MMU_PAGE_64K, ssize, flags);
 		/*
 		 * clear the old slot details from the old and new pte.
 		 * On hash insert failure we use old pte value and we don't
 		 * want slot information there if we have a insert failure.
 		 */
-		old_pte &= ~(_PAGE_HASHPTE | _PAGE_F_GIX | _PAGE_F_SECOND);
-		new_pte &= ~(_PAGE_HASHPTE | _PAGE_F_GIX | _PAGE_F_SECOND);
+		old_pte &= ~(H_PAGE_HASHPTE | H_PAGE_F_GIX | H_PAGE_F_SECOND);
+		new_pte &= ~(H_PAGE_HASHPTE | H_PAGE_F_GIX | H_PAGE_F_SECOND);
 		goto htab_insert_hpte;
 	}
 	/*
@@ -143,15 +143,15 @@
 		if (ret == -1)
 			goto htab_insert_hpte;
 
-		*ptep = __pte(new_pte & ~_PAGE_BUSY);
+		*ptep = __pte(new_pte & ~H_PAGE_BUSY);
 		return 0;
 	}
 
 htab_insert_hpte:
 	/*
-	 * handle _PAGE_4K_PFN case
+	 * handle H_PAGE_4K_PFN case
 	 */
-	if (old_pte & _PAGE_4K_PFN) {
+	if (old_pte & H_PAGE_4K_PFN) {
 		/*
 		 * All the sub 4k page have the same
 		 * physical address.
@@ -199,20 +199,20 @@
 	}
 	/*
 	 * Insert slot number & secondary bit in PTE second half,
-	 * clear _PAGE_BUSY and set appropriate HPTE slot bit
-	 * Since we have _PAGE_BUSY set on ptep, we can be sure
+	 * clear H_PAGE_BUSY and set appropriate HPTE slot bit
+	 * Since we have H_PAGE_BUSY set on ptep, we can be sure
 	 * nobody is undating hidx.
 	 */
 	hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
 	rpte.hidx &= ~(0xfUL << (subpg_index << 2));
 	*hidxp = rpte.hidx  | (slot << (subpg_index << 2));
 	new_pte = mark_subptegroup_valid(new_pte, subpg_index);
-	new_pte |=  _PAGE_HASHPTE;
+	new_pte |=  H_PAGE_HASHPTE;
 	/*
 	 * check __real_pte for details on matching smp_rmb()
 	 */
 	smp_wmb();
-	*ptep = __pte(new_pte & ~_PAGE_BUSY);
+	*ptep = __pte(new_pte & ~H_PAGE_BUSY);
 	return 0;
 }
 
@@ -234,7 +234,7 @@
 
 		old_pte = pte_val(pte);
 		/* If PTE busy, retry the access */
-		if (unlikely(old_pte & _PAGE_BUSY))
+		if (unlikely(old_pte & H_PAGE_BUSY))
 			return 0;
 		/* If PTE permissions don't match, take page fault */
 		if (unlikely(!check_pte_access(access, old_pte)))
@@ -250,7 +250,7 @@
 		 * Try to lock the PTE, add ACCESSED and DIRTY if it was
 		 * a write access.
 		 */
-		new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
+		new_pte = old_pte | H_PAGE_BUSY | _PAGE_ACCESSED;
 		if (access & _PAGE_WRITE)
 			new_pte |= _PAGE_DIRTY;
 	} while (!pte_xchg(ptep, __pte(old_pte), __pte(new_pte)));
@@ -262,22 +262,22 @@
 		rflags = hash_page_do_lazy_icache(rflags, __pte(old_pte), trap);
 
 	vpn  = hpt_vpn(ea, vsid, ssize);
-	if (unlikely(old_pte & _PAGE_HASHPTE)) {
+	if (unlikely(old_pte & H_PAGE_HASHPTE)) {
 		/*
 		 * There MIGHT be an HPTE for this pte
 		 */
 		hash = hpt_hash(vpn, shift, ssize);
-		if (old_pte & _PAGE_F_SECOND)
+		if (old_pte & H_PAGE_F_SECOND)
 			hash = ~hash;
 		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
-		slot += (old_pte & _PAGE_F_GIX) >> _PAGE_F_GIX_SHIFT;
+		slot += (old_pte & H_PAGE_F_GIX) >> H_PAGE_F_GIX_SHIFT;
 
 		if (ppc_md.hpte_updatepp(slot, rflags, vpn, MMU_PAGE_64K,
 					 MMU_PAGE_64K, ssize, flags) == -1)
 			old_pte &= ~_PAGE_HPTEFLAGS;
 	}
 
-	if (likely(!(old_pte & _PAGE_HASHPTE))) {
+	if (likely(!(old_pte & H_PAGE_HASHPTE))) {
 
 		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
 		hash = hpt_hash(vpn, shift, ssize);
@@ -317,9 +317,10 @@
 					   MMU_PAGE_64K, MMU_PAGE_64K, old_pte);
 			return -1;
 		}
-		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
-		new_pte |= (slot << _PAGE_F_GIX_SHIFT) & (_PAGE_F_SECOND | _PAGE_F_GIX);
+		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | H_PAGE_HASHPTE;
+		new_pte |= (slot << H_PAGE_F_GIX_SHIFT) &
+			(H_PAGE_F_SECOND | H_PAGE_F_GIX);
 	}
-	*ptep = __pte(new_pte & ~_PAGE_BUSY);
+	*ptep = __pte(new_pte & ~H_PAGE_BUSY);
 	return 0;
 }