Merge tag 'tty-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY updates from Greg Kroah-Hartman:
"Here's the big TTY/serial driver pull request for the 3.5-rc1 merge
window.
Nothing major in here, just lots of incremental changes from Alan and
Jiri reworking some tty core things to behave better and to get a more
solid grasp on some of the nasty tty locking issues.
There are a few tty and serial driver updates in here as well.
All of this has been in the linux-next releases for a while with no
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'tty-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (115 commits)
serial: bfin_uart: Make MMR access compatible with 32 bits bf609 style controller.
serial: bfin_uart: RTS and CTS MMRs can be either 16-bit width or 32-bit width.
serial: bfin_uart: narrow the reboot condition in DMA tx interrupt
serial: bfin_uart: Adapt bf5xx serial driver to bf60x serial4 controller.
Revert "serial_core: Update buffer overrun statistics."
tty: hvc_xen: NULL dereference on allocation failure
tty: Fix LED error return
tty: Allow uart_register/unregister/register
tty: move global ldisc idle waitqueue to the individual ldisc
serial8250-em: Add DT support
serial8250-em: clk_get() IS_ERR() error handling fix
serial_core: Update buffer overrun statistics.
tty: drop the pty lock during hangup
cris: fix missing tty arg in wait_event_interruptible_tty call
tty/amiserial: Add missing argument for tty_unlock()
tty_lock: Localise the lock
pty: Lock the devpts bits privately
tty_lock: undo the old tty_lock use on the ctty
serial8250-em: Emma Mobile UART driver V2
Add missing call to uart_update_timeout()
...
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 678dd1d..292d4aa 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -245,14 +245,6 @@
omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
omap_up.autosuspend_timeout = info->autosuspend_timeout;
- /* Enable the MDR1 Errata i202 for OMAP2430/3xxx/44xx */
- if (!cpu_is_omap2420() && !cpu_is_ti816x())
- omap_up.errata |= UART_ERRATA_i202_MDR1_ACCESS;
-
- /* Enable DMA Mode Force Idle Errata i291 for omap34xx/3630 */
- if (cpu_is_omap34xx() || cpu_is_omap3630())
- omap_up.errata |= UART_ERRATA_i291_DMA_FORCEIDLE;
-
pdata = &omap_up;
pdata_size = sizeof(struct omap_uart_port_info);
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index c00aadb..222182e 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
+#include <linux/of_serial.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/pda_power.h>
@@ -52,6 +53,7 @@
.irq = INT_UARTD,
.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
.type = PORT_TEGRA,
+ .handle_break = tegra_serial_handle_break,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 330afdf..d0735c7 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
+#include <linux/of_serial.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/gpio_keys.h>
@@ -55,6 +56,7 @@
.irq = INT_UARTA,
.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
.type = PORT_TEGRA,
+ .handle_break = tegra_serial_handle_break,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
@@ -65,6 +67,7 @@
.irq = INT_UARTC,
.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
.type = PORT_TEGRA,
+ .handle_break = tegra_serial_handle_break,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index a0184fb..20743bc 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
+#include <linux/of_serial.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/input.h>
@@ -48,6 +49,7 @@
/* Memory and IRQ filled in before registration */
.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
.type = PORT_TEGRA,
+ .handle_break = tegra_serial_handle_break,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index f6f5b6a..0a00183 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
+#include <linux/of_serial.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
@@ -49,6 +50,7 @@
.irq = INT_UARTA,
.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
.type = PORT_TEGRA,
+ .handle_break = tegra_serial_handle_break,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 9ff4444..1a52725 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -65,7 +65,6 @@
bool dma_enabled; /* To specify DMA Mode */
unsigned int uartclk; /* UART clock rate */
upf_t flags; /* UPF_* flags */
- u32 errata;
unsigned int dma_rx_buf_size;
unsigned int dma_rx_timeout;
unsigned int autosuspend_timeout;
diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index d9f5524..8c610fa 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -46,7 +46,6 @@
static char *isdn_revision = "$Revision: 1.1.2.3 $";
extern char *isdn_net_revision;
-extern char *isdn_tty_revision;
#ifdef CONFIG_ISDN_PPP
extern char *isdn_ppp_revision;
#else
@@ -2327,8 +2326,6 @@
dev->chanmap[i] = -1;
dev->m_idx[i] = -1;
strcpy(dev->num[i], "???");
- init_waitqueue_head(&dev->mdm.info[i].open_wait);
- init_waitqueue_head(&dev->mdm.info[i].close_wait);
}
if (register_chrdev(ISDN_MAJOR, "isdn", &isdn_fops)) {
printk(KERN_WARNING "isdn: Could not register control devices\n");
@@ -2353,8 +2350,6 @@
strcpy(tmprev, isdn_revision);
printk(KERN_NOTICE "ISDN subsystem Rev: %s/", isdn_getrev(tmprev));
- strcpy(tmprev, isdn_tty_revision);
- printk("%s/", isdn_getrev(tmprev));
strcpy(tmprev, isdn_net_revision);
printk("%s/", isdn_getrev(tmprev));
strcpy(tmprev, isdn_ppp_revision);
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 3831abd..7bc5067 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1,5 +1,4 @@
-/* $Id: isdn_tty.c,v 1.1.2.3 2004/02/10 01:07:13 keil Exp $
- *
+/*
* Linux ISDN subsystem, tty functions and AT-command emulator (linklevel).
*
* Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de)
@@ -12,6 +11,7 @@
#undef ISDN_TTY_STAT_DEBUG
#include <linux/isdn.h>
+#include <linux/serial.h> /* ASYNC_* flags */
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/mutex.h>
@@ -48,9 +48,6 @@
static int si2bit[8] =
{4, 1, 4, 4, 4, 4, 4, 4};
-char *isdn_tty_revision = "$Revision: 1.1.2.3 $";
-
-
/* isdn_tty_try_read() is called from within isdn_tty_rcv_skb()
* to stuff incoming data directly into a tty's flip-buffer. This
* is done to speed up tty-receiving if the receive-queue is empty.
@@ -68,49 +65,54 @@
struct tty_struct *tty;
char last;
- if (info->online) {
- if ((tty = info->tty)) {
- if (info->mcr & UART_MCR_RTS) {
- len = skb->len
-#ifdef CONFIG_ISDN_AUDIO
- + ISDN_AUDIO_SKB_DLECOUNT(skb)
-#endif
- ;
+ if (!info->online)
+ return 0;
- c = tty_buffer_request_room(tty, len);
- if (c >= len) {
+ tty = info->port.tty;
+ if (!tty)
+ return 0;
+
+ if (!(info->mcr & UART_MCR_RTS))
+ return 0;
+
+ len = skb->len
#ifdef CONFIG_ISDN_AUDIO
- if (ISDN_AUDIO_SKB_DLECOUNT(skb)) {
- int l = skb->len;
- unsigned char *dp = skb->data;
- while (--l) {
- if (*dp == DLE)
- tty_insert_flip_char(tty, DLE, 0);
- tty_insert_flip_char(tty, *dp++, 0);
- }
- if (*dp == DLE)
- tty_insert_flip_char(tty, DLE, 0);
- last = *dp;
- } else {
+ + ISDN_AUDIO_SKB_DLECOUNT(skb)
#endif
- if (len > 1)
- tty_insert_flip_string(tty, skb->data, len - 1);
- last = skb->data[len - 1];
+ ;
+
+ c = tty_buffer_request_room(tty, len);
+ if (c < len)
+ return 0;
+
#ifdef CONFIG_ISDN_AUDIO
- }
-#endif
- if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP)
- tty_insert_flip_char(tty, last, 0xFF);
- else
- tty_insert_flip_char(tty, last, TTY_NORMAL);
- tty_flip_buffer_push(tty);
- kfree_skb(skb);
- return 1;
- }
- }
+ if (ISDN_AUDIO_SKB_DLECOUNT(skb)) {
+ int l = skb->len;
+ unsigned char *dp = skb->data;
+ while (--l) {
+ if (*dp == DLE)
+ tty_insert_flip_char(tty, DLE, 0);
+ tty_insert_flip_char(tty, *dp++, 0);
}
+ if (*dp == DLE)
+ tty_insert_flip_char(tty, DLE, 0);
+ last = *dp;
+ } else {
+#endif
+ if (len > 1)
+ tty_insert_flip_string(tty, skb->data, len - 1);
+ last = skb->data[len - 1];
+#ifdef CONFIG_ISDN_AUDIO
}
- return 0;
+#endif
+ if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP)
+ tty_insert_flip_char(tty, last, 0xFF);
+ else
+ tty_insert_flip_char(tty, last, TTY_NORMAL);
+ tty_flip_buffer_push(tty);
+ kfree_skb(skb);
+
+ return 1;
}
/* isdn_tty_readmodem() is called periodically from within timer-interrupt.
@@ -128,35 +130,39 @@
modem_info *info;
for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
- if ((midx = dev->m_idx[i]) >= 0) {
- info = &dev->mdm.info[midx];
- if (info->online) {
- r = 0;
+ midx = dev->m_idx[i];
+ if (midx < 0)
+ continue;
+
+ info = &dev->mdm.info[midx];
+ if (!info->online)
+ continue;
+
+ r = 0;
#ifdef CONFIG_ISDN_AUDIO
- isdn_audio_eval_dtmf(info);
- if ((info->vonline & 1) && (info->emu.vpar[1]))
- isdn_audio_eval_silence(info);
+ isdn_audio_eval_dtmf(info);
+ if ((info->vonline & 1) && (info->emu.vpar[1]))
+ isdn_audio_eval_silence(info);
#endif
- if ((tty = info->tty)) {
- if (info->mcr & UART_MCR_RTS) {
- /* CISCO AsyncPPP Hack */
- if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
- r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 0);
- else
- r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 1);
- if (r)
- tty_flip_buffer_push(tty);
- } else
- r = 1;
- } else
- r = 1;
- if (r) {
- info->rcvsched = 0;
- resched = 1;
- } else
- info->rcvsched = 1;
- }
- }
+ tty = info->port.tty;
+ if (tty) {
+ if (info->mcr & UART_MCR_RTS) {
+ /* CISCO AsyncPPP Hack */
+ if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
+ r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 0);
+ else
+ r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 1);
+ if (r)
+ tty_flip_buffer_push(tty);
+ } else
+ r = 1;
+ } else
+ r = 1;
+ if (r) {
+ info->rcvsched = 0;
+ resched = 1;
+ } else
+ info->rcvsched = 1;
}
if (!resched)
isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 0);
@@ -294,7 +300,7 @@
len = skb->len;
if ((slen = isdn_writebuf_skb_stub(info->isdn_driver,
info->isdn_channel, 1, skb)) == len) {
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
info->send_outstanding++;
info->msr &= ~UART_MSR_CTS;
info->lsr &= ~UART_LSR_TEMT;
@@ -327,7 +333,7 @@
static int
isdn_tty_handleDLEdown(modem_info *info, atemu *m, int len)
{
- unsigned char *p = &info->xmit_buf[info->xmit_count];
+ unsigned char *p = &info->port.xmit_buf[info->xmit_count];
int count = 0;
while (len > 0) {
@@ -471,7 +477,7 @@
return;
}
skb_reserve(skb, skb_res);
- memcpy(skb_put(skb, buflen), info->xmit_buf, buflen);
+ memcpy(skb_put(skb, buflen), info->port.xmit_buf, buflen);
info->xmit_count = 0;
#ifdef CONFIG_ISDN_AUDIO
if (info->vonline & 2) {
@@ -699,7 +705,7 @@
printk(KERN_DEBUG "Mhup ttyI%d\n", info->line);
#endif
info->rcvsched = 0;
- isdn_tty_flush_buffer(info->tty);
+ isdn_tty_flush_buffer(info->port.tty);
if (info->online) {
info->last_lhup = local;
info->online = 0;
@@ -997,20 +1003,21 @@
static void
isdn_tty_change_speed(modem_info *info)
{
+ struct tty_port *port = &info->port;
uint cflag,
cval,
quot;
int i;
- if (!info->tty || !info->tty->termios)
+ if (!port->tty || !port->tty->termios)
return;
- cflag = info->tty->termios->c_cflag;
+ cflag = port->tty->termios->c_cflag;
quot = i = cflag & CBAUD;
if (i & CBAUDEX) {
i &= ~CBAUDEX;
if (i < 1 || i > 2)
- info->tty->termios->c_cflag &= ~CBAUDEX;
+ port->tty->termios->c_cflag &= ~CBAUDEX;
else
i += 15;
}
@@ -1040,20 +1047,20 @@
/* CTS flow control flag and modem status interrupts */
if (cflag & CRTSCTS) {
- info->flags |= ISDN_ASYNC_CTS_FLOW;
+ port->flags |= ASYNC_CTS_FLOW;
} else
- info->flags &= ~ISDN_ASYNC_CTS_FLOW;
+ port->flags &= ~ASYNC_CTS_FLOW;
if (cflag & CLOCAL)
- info->flags &= ~ISDN_ASYNC_CHECK_CD;
+ port->flags &= ~ASYNC_CHECK_CD;
else {
- info->flags |= ISDN_ASYNC_CHECK_CD;
+ port->flags |= ASYNC_CHECK_CD;
}
}
static int
isdn_tty_startup(modem_info *info)
{
- if (info->flags & ISDN_ASYNC_INITIALIZED)
+ if (info->port.flags & ASYNC_INITIALIZED)
return 0;
isdn_lock_drivers();
#ifdef ISDN_DEBUG_MODEM_OPEN
@@ -1063,14 +1070,14 @@
* Now, initialize the UART
*/
info->mcr = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
/*
* and set the speed of the serial port
*/
isdn_tty_change_speed(info);
- info->flags |= ISDN_ASYNC_INITIALIZED;
+ info->port.flags |= ASYNC_INITIALIZED;
info->msr |= (UART_MSR_DSR | UART_MSR_CTS);
info->send_outstanding = 0;
return 0;
@@ -1083,14 +1090,14 @@
static void
isdn_tty_shutdown(modem_info *info)
{
- if (!(info->flags & ISDN_ASYNC_INITIALIZED))
+ if (!(info->port.flags & ASYNC_INITIALIZED))
return;
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "Shutting down isdnmodem port %d ....\n", info->line);
#endif
isdn_unlock_drivers();
info->msr &= ~UART_MSR_RI;
- if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
+ if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS);
if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
isdn_tty_modem_reset_regs(info, 0);
@@ -1100,10 +1107,10 @@
isdn_tty_modem_hup(info, 1);
}
}
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->flags &= ~ISDN_ASYNC_INITIALIZED;
+ info->port.flags &= ~ASYNC_INITIALIZED;
}
/* isdn_tty_write() is the main send-routine. It is called from the upper
@@ -1146,7 +1153,7 @@
isdn_tty_check_esc(buf, m->mdmreg[REG_ESC], c,
&(m->pluscount),
&(m->lastplus));
- memcpy(&(info->xmit_buf[info->xmit_count]), buf, c);
+ memcpy(&info->port.xmit_buf[info->xmit_count], buf, c);
#ifdef CONFIG_ISDN_AUDIO
if (info->vonline) {
int cc = isdn_tty_handleDLEdown(info, m, c);
@@ -1478,107 +1485,6 @@
* isdn_tty_open() and friends
* ------------------------------------------------------------
*/
-static int
-isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info *info)
-{
- DECLARE_WAITQUEUE(wait, NULL);
- int do_clocal = 0;
- int retval;
-
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (tty_hung_up_p(filp) ||
- (info->flags & ISDN_ASYNC_CLOSING)) {
- if (info->flags & ISDN_ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
-#ifdef MODEM_DO_RESTART
- if (info->flags & ISDN_ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
-#else
- return -EAGAIN;
-#endif
- }
- /*
- * If non-blocking mode is set, then make the check up front
- * and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE)
- return -EBUSY;
- info->flags |= ISDN_ASYNC_NORMAL_ACTIVE;
- return 0;
- }
- if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) {
- if (info->normal_termios.c_cflag & CLOCAL)
- do_clocal = 1;
- } else {
- if (tty->termios->c_cflag & CLOCAL)
- do_clocal = 1;
- }
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
- * isdn_tty_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&info->open_wait, &wait);
-#ifdef ISDN_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "isdn_tty_block_til_ready before block: ttyi%d, count = %d\n",
- info->line, info->count);
-#endif
- if (!(tty_hung_up_p(filp)))
- info->count--;
- info->blocked_open++;
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) ||
- !(info->flags & ISDN_ASYNC_INITIALIZED)) {
-#ifdef MODEM_DO_RESTART
- if (info->flags & ISDN_ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
-#else
- retval = -EAGAIN;
-#endif
- break;
- }
- if (!(info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
- !(info->flags & ISDN_ASYNC_CLOSING) &&
- (do_clocal || (info->msr & UART_MSR_DCD))) {
- break;
- }
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
-#ifdef ISDN_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "isdn_tty_block_til_ready blocking: ttyi%d, count = %d\n",
- info->line, info->count);
-#endif
- schedule();
- }
- current->state = TASK_RUNNING;
- remove_wait_queue(&info->open_wait, &wait);
- if (!tty_hung_up_p(filp))
- info->count++;
- info->blocked_open--;
-#ifdef ISDN_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "isdn_tty_block_til_ready after blocking: ttyi%d, count = %d\n",
- info->line, info->count);
-#endif
- if (retval)
- return retval;
- info->flags |= ISDN_ASYNC_NORMAL_ACTIVE;
- return 0;
-}
/*
* This routine is called whenever a serial port is opened. It
@@ -1589,23 +1495,22 @@
static int
isdn_tty_open(struct tty_struct *tty, struct file *filp)
{
+ struct tty_port *port;
modem_info *info;
int retval;
info = &dev->mdm.info[tty->index];
if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_open"))
return -ENODEV;
- if (!try_module_get(info->owner)) {
- printk(KERN_WARNING "%s: cannot reserve module\n", __func__);
- return -ENODEV;
- }
+ port = &info->port;
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name,
- info->count);
+ port->count);
#endif
- info->count++;
+ port->count++;
tty->driver_data = info;
- info->tty = tty;
+ port->tty = tty;
+ tty->port = port;
/*
* Start up serial port
*/
@@ -1614,15 +1519,13 @@
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_open return after startup\n");
#endif
- module_put(info->owner);
return retval;
}
- retval = isdn_tty_block_til_ready(tty, filp, info);
+ retval = tty_port_block_til_ready(port, tty, filp);
if (retval) {
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_open return after isdn_tty_block_til_ready \n");
#endif
- module_put(info->owner);
return retval;
}
#ifdef ISDN_DEBUG_MODEM_OPEN
@@ -1639,6 +1542,7 @@
isdn_tty_close(struct tty_struct *tty, struct file *filp)
{
modem_info *info = (modem_info *) tty->driver_data;
+ struct tty_port *port = &info->port;
ulong timeout;
if (!info || isdn_tty_paranoia_check(info, tty->name, "isdn_tty_close"))
@@ -1649,7 +1553,7 @@
#endif
return;
}
- if ((tty->count == 1) && (info->count != 1)) {
+ if ((tty->count == 1) && (port->count != 1)) {
/*
* Uh, oh. tty->count is 1, which means that the tty
* structure will be freed. Info->count should always
@@ -1658,30 +1562,21 @@
* serial port won't be shutdown.
*/
printk(KERN_ERR "isdn_tty_close: bad port count; tty->count is 1, "
- "info->count is %d\n", info->count);
- info->count = 1;
+ "info->count is %d\n", port->count);
+ port->count = 1;
}
- if (--info->count < 0) {
+ if (--port->count < 0) {
printk(KERN_ERR "isdn_tty_close: bad port count for ttyi%d: %d\n",
- info->line, info->count);
- info->count = 0;
+ info->line, port->count);
+ port->count = 0;
}
- if (info->count) {
+ if (port->count) {
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n");
#endif
- module_put(info->owner);
return;
}
- info->flags |= ISDN_ASYNC_CLOSING;
- /*
- * Save the termios structure, since this port may have
- * separate termios for callout and dialin.
- */
- if (info->flags & ISDN_ASYNC_NORMAL_ACTIVE)
- info->normal_termios = *tty->termios;
- if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE)
- info->callout_termios = *tty->termios;
+ port->flags |= ASYNC_CLOSING;
tty->closing = 1;
/*
@@ -1690,7 +1585,7 @@
* interrupt driver to stop checking the data ready bit in the
* line status register.
*/
- if (info->flags & ISDN_ASYNC_INITIALIZED) {
+ if (port->flags & ASYNC_INITIALIZED) {
tty_wait_until_sent_from_close(tty, 3000); /* 30 seconds timeout */
/*
* Before we drop DTR, make sure the UART transmitter
@@ -1708,16 +1603,10 @@
isdn_tty_shutdown(info);
isdn_tty_flush_buffer(tty);
tty_ldisc_flush(tty);
- info->tty = NULL;
+ port->tty = NULL;
info->ncarrier = 0;
- tty->closing = 0;
- module_put(info->owner);
- if (info->blocked_open) {
- msleep_interruptible(500);
- wake_up_interruptible(&info->open_wait);
- }
- info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
+
+ tty_port_close_end(port, tty);
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_close normal exit\n");
#endif
@@ -1730,14 +1619,15 @@
isdn_tty_hangup(struct tty_struct *tty)
{
modem_info *info = (modem_info *) tty->driver_data;
+ struct tty_port *port = &info->port;
if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_hangup"))
return;
isdn_tty_shutdown(info);
- info->count = 0;
- info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE);
- info->tty = NULL;
- wake_up_interruptible(&info->open_wait);
+ port->count = 0;
+ port->flags &= ~ASYNC_NORMAL_ACTIVE;
+ port->tty = NULL;
+ wake_up_interruptible(&port->open_wait);
}
/* This routine initializes all emulator-data.
@@ -1864,6 +1754,16 @@
.tiocmset = isdn_tty_tiocmset,
};
+static int isdn_tty_carrier_raised(struct tty_port *port)
+{
+ modem_info *info = container_of(port, modem_info, port);
+ return info->msr & UART_MSR_DCD;
+}
+
+static const struct tty_port_operations isdn_tty_port_ops = {
+ .carrier_raised = isdn_tty_carrier_raised,
+};
+
int
isdn_tty_modem_init(void)
{
@@ -1899,9 +1799,8 @@
goto err_unregister;
}
#endif
-#ifdef MODULE
- info->owner = THIS_MODULE;
-#endif
+ tty_port_init(&info->port);
+ info->port.ops = &isdn_tty_port_ops;
spin_lock_init(&info->readlock);
sprintf(info->last_cause, "0000");
sprintf(info->last_num, "none");
@@ -1913,12 +1812,7 @@
isdn_tty_modem_reset_regs(info, 1);
info->magic = ISDN_ASYNC_MAGIC;
info->line = i;
- info->tty = NULL;
info->x_char = 0;
- info->count = 0;
- info->blocked_open = 0;
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
info->isdn_driver = -1;
info->isdn_channel = -1;
info->drv_index = -1;
@@ -1930,13 +1824,15 @@
#ifdef CONFIG_ISDN_AUDIO
skb_queue_head_init(&info->dtmf_queue);
#endif
- if (!(info->xmit_buf = kmalloc(ISDN_SERIAL_XMIT_MAX + 5, GFP_KERNEL))) {
+ info->port.xmit_buf = kmalloc(ISDN_SERIAL_XMIT_MAX + 5,
+ GFP_KERNEL);
+ if (!info->port.xmit_buf) {
printk(KERN_ERR "Could not allocate modem xmit-buffer\n");
retval = -ENOMEM;
goto err_unregister;
}
/* Make room for T.70 header */
- info->xmit_buf += 4;
+ info->port.xmit_buf += 4;
}
return 0;
err_unregister:
@@ -1945,7 +1841,7 @@
#ifdef CONFIG_ISDN_TTY_FAX
kfree(info->fax);
#endif
- kfree(info->xmit_buf - 4);
+ kfree(info->port.xmit_buf - 4);
}
tty_unregister_driver(m->tty_modem);
err:
@@ -1966,7 +1862,7 @@
#ifdef CONFIG_ISDN_TTY_FAX
kfree(info->fax);
#endif
- kfree(info->xmit_buf - 4);
+ kfree(info->port.xmit_buf - 4);
}
tty_unregister_driver(dev->mdm.tty_modem);
put_tty_driver(dev->mdm.tty_modem);
@@ -2068,7 +1964,7 @@
for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
modem_info *info = &dev->mdm.info[i];
- if (info->count == 0)
+ if (info->port.count == 0)
continue;
if ((info->emu.mdmreg[REG_SI1] & si2bit[si1]) && /* SI1 is matching */
(info->emu.mdmreg[REG_SI2] == si2)) { /* SI2 is matching */
@@ -2076,12 +1972,12 @@
#ifdef ISDN_DEBUG_MODEM_ICALL
printk(KERN_DEBUG "m_fi: match1 wret=%d\n", wret);
printk(KERN_DEBUG "m_fi: idx=%d flags=%08lx drv=%d ch=%d usg=%d\n", idx,
- info->flags, info->isdn_driver, info->isdn_channel,
- dev->usage[idx]);
+ info->port.flags, info->isdn_driver,
+ info->isdn_channel, dev->usage[idx]);
#endif
if (
#ifndef FIX_FILE_TRANSFER
- (info->flags & ISDN_ASYNC_NORMAL_ACTIVE) &&
+ (info->port.flags & ASYNC_NORMAL_ACTIVE) &&
#endif
(info->isdn_driver == -1) &&
(info->isdn_channel == -1) &&
@@ -2120,8 +2016,7 @@
return (wret == 2) ? 3 : 0;
}
-#define TTY_IS_ACTIVE(info) \
- (info->flags & (ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE))
+#define TTY_IS_ACTIVE(info) (info->port.flags & ASYNC_NORMAL_ACTIVE)
int
isdn_tty_stat_callback(int i, isdn_ctrl *c)
@@ -2212,9 +2107,9 @@
* for incoming call of this device when
* DCD follow the state of incoming carrier
*/
- if (info->blocked_open &&
+ if (info->port.blocked_open &&
(info->emu.mdmreg[REG_DCD] & BIT_DCD)) {
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
}
/* Schedule CONNECT-Message to any tty
@@ -2222,7 +2117,8 @@
* set DCD-bit of its modem-status.
*/
if (TTY_IS_ACTIVE(info) ||
- (info->blocked_open && (info->emu.mdmreg[REG_DCD] & BIT_DCD))) {
+ (info->port.blocked_open &&
+ (info->emu.mdmreg[REG_DCD] & BIT_DCD))) {
info->msr |= UART_MSR_DCD;
info->emu.charge = 0;
if (info->dialing & 0xf)
@@ -2339,8 +2235,8 @@
l = strlen(msg);
spin_lock_irqsave(&info->readlock, flags);
- tty = info->tty;
- if ((info->flags & ISDN_ASYNC_CLOSING) || (!tty)) {
+ tty = info->port.tty;
+ if ((info->port.flags & ASYNC_CLOSING) || (!tty)) {
spin_unlock_irqrestore(&info->readlock, flags);
return;
}
@@ -2490,15 +2386,15 @@
case RESULT_NO_CARRIER:
#ifdef ISDN_DEBUG_MODEM_HUP
printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n",
- (info->flags & ISDN_ASYNC_CLOSING),
- (!info->tty));
+ (info->port.flags & ASYNC_CLOSING),
+ (!info->port.tty));
#endif
m->mdmreg[REG_RINGCNT] = 0;
del_timer(&info->nc_timer);
info->ncarrier = 0;
- if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
+ if ((info->port.flags & ASYNC_CLOSING) || (!info->port.tty))
return;
- }
+
#ifdef CONFIG_ISDN_AUDIO
if (info->vonline & 1) {
#ifdef ISDN_DEBUG_MODEM_VOICE
@@ -2629,14 +2525,11 @@
}
}
if (code == RESULT_NO_CARRIER) {
- if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
+ if ((info->port.flags & ASYNC_CLOSING) || (!info->port.tty))
return;
- }
- if ((info->flags & ISDN_ASYNC_CHECK_CD) &&
- (!((info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
- (info->flags & ISDN_ASYNC_CALLOUT_NOHUP)))) {
- tty_hangup(info->tty);
- }
+
+ if (info->port.flags & ASYNC_CHECK_CD)
+ tty_hangup(info->port.tty);
}
}
@@ -3803,19 +3696,19 @@
int midx;
for (i = 0; i < ISDN_MAX_CHANNELS; i++)
- if (USG_MODEM(dev->usage[i]))
- if ((midx = dev->m_idx[i]) >= 0) {
- modem_info *info = &dev->mdm.info[midx];
- if (info->online) {
- ton = 1;
- if ((info->emu.pluscount == 3) &&
- time_after(jiffies , info->emu.lastplus + PLUSWAIT2)) {
- info->emu.pluscount = 0;
- info->online = 0;
- isdn_tty_modem_result(RESULT_OK, info);
- }
+ if (USG_MODEM(dev->usage[i]) && (midx = dev->m_idx[i]) >= 0) {
+ modem_info *info = &dev->mdm.info[midx];
+ if (info->online) {
+ ton = 1;
+ if ((info->emu.pluscount == 3) &&
+ time_after(jiffies,
+ info->emu.lastplus + PLUSWAIT2)) {
+ info->emu.pluscount = 0;
+ info->online = 0;
+ isdn_tty_modem_result(RESULT_OK, info);
}
}
+ }
isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, ton);
}
@@ -3873,15 +3766,14 @@
for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
modem_info *info = &dev->mdm.info[i];
- if (info->dialing) {
- if (info->emu.carrierwait++ > info->emu.mdmreg[REG_WAITC]) {
- info->dialing = 0;
- isdn_tty_modem_result(RESULT_NO_CARRIER, info);
- isdn_tty_modem_hup(info, 1);
- }
- else
- ton = 1;
- }
+ if (!info->dialing)
+ continue;
+ if (info->emu.carrierwait++ > info->emu.mdmreg[REG_WAITC]) {
+ info->dialing = 0;
+ isdn_tty_modem_result(RESULT_NO_CARRIER, info);
+ isdn_tty_modem_hup(info, 1);
+ } else
+ ton = 1;
}
isdn_timer_ctrl(ISDN_TIMER_CARRIER, ton);
}
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 042c1a9..62f30b4 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -106,13 +106,6 @@
#define MAX_RX_URBS 2
-static inline struct hso_serial *get_serial_by_tty(struct tty_struct *tty)
-{
- if (tty)
- return tty->driver_data;
- return NULL;
-}
-
/*****************************************************************************/
/* Debugging functions */
/*****************************************************************************/
@@ -255,9 +248,8 @@
u8 dtr_state;
unsigned tx_urb_used:1;
+ struct tty_port port;
/* from usb_serial_port */
- struct tty_struct *tty;
- int open_count;
spinlock_t serial_lock;
int (*write_data) (struct hso_serial *serial);
@@ -1114,7 +1106,7 @@
static void _hso_serial_set_termios(struct tty_struct *tty,
struct ktermios *old)
{
- struct hso_serial *serial = get_serial_by_tty(tty);
+ struct hso_serial *serial = tty->driver_data;
struct ktermios *termios;
if (!serial) {
@@ -1190,7 +1182,7 @@
struct urb *urb;
urb = serial->rx_urb[0];
- if (serial->open_count > 0) {
+ if (serial->port.count > 0) {
count = put_rxbuf_data(urb, serial);
if (count == -1)
return;
@@ -1226,7 +1218,7 @@
DUMP1(urb->transfer_buffer, urb->actual_length);
/* Anyone listening? */
- if (serial->open_count == 0)
+ if (serial->port.count == 0)
return;
if (status == 0) {
@@ -1268,7 +1260,7 @@
static void hso_unthrottle(struct tty_struct *tty)
{
- struct hso_serial *serial = get_serial_by_tty(tty);
+ struct hso_serial *serial = tty->driver_data;
tasklet_hi_schedule(&serial->unthrottle_tasklet);
}
@@ -1304,15 +1296,12 @@
kref_get(&serial->parent->ref);
/* setup */
- spin_lock_irq(&serial->serial_lock);
tty->driver_data = serial;
- tty_kref_put(serial->tty);
- serial->tty = tty_kref_get(tty);
- spin_unlock_irq(&serial->serial_lock);
+ tty_port_tty_set(&serial->port, tty);
/* check for port already opened, if not set the termios */
- serial->open_count++;
- if (serial->open_count == 1) {
+ serial->port.count++;
+ if (serial->port.count == 1) {
serial->rx_state = RX_IDLE;
/* Force default termio settings */
_hso_serial_set_termios(tty, NULL);
@@ -1324,7 +1313,7 @@
result = hso_start_serial_device(serial->parent, GFP_KERNEL);
if (result) {
hso_stop_serial_device(serial->parent);
- serial->open_count--;
+ serial->port.count--;
kref_put(&serial->parent->ref, hso_serial_ref_free);
}
} else {
@@ -1361,17 +1350,11 @@
/* reset the rts and dtr */
/* do the actual close */
- serial->open_count--;
+ serial->port.count--;
- if (serial->open_count <= 0) {
- serial->open_count = 0;
- spin_lock_irq(&serial->serial_lock);
- if (serial->tty == tty) {
- serial->tty->driver_data = NULL;
- serial->tty = NULL;
- tty_kref_put(tty);
- }
- spin_unlock_irq(&serial->serial_lock);
+ if (serial->port.count <= 0) {
+ serial->port.count = 0;
+ tty_port_tty_set(&serial->port, NULL);
if (!usb_gone)
hso_stop_serial_device(serial->parent);
tasklet_kill(&serial->unthrottle_tasklet);
@@ -1390,7 +1373,7 @@
static int hso_serial_write(struct tty_struct *tty, const unsigned char *buf,
int count)
{
- struct hso_serial *serial = get_serial_by_tty(tty);
+ struct hso_serial *serial = tty->driver_data;
int space, tx_bytes;
unsigned long flags;
@@ -1422,7 +1405,7 @@
/* how much room is there for writing */
static int hso_serial_write_room(struct tty_struct *tty)
{
- struct hso_serial *serial = get_serial_by_tty(tty);
+ struct hso_serial *serial = tty->driver_data;
int room;
unsigned long flags;
@@ -1437,7 +1420,7 @@
/* setup the term */
static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old)
{
- struct hso_serial *serial = get_serial_by_tty(tty);
+ struct hso_serial *serial = tty->driver_data;
unsigned long flags;
if (old)
@@ -1446,7 +1429,7 @@
/* the actual setup */
spin_lock_irqsave(&serial->serial_lock, flags);
- if (serial->open_count)
+ if (serial->port.count)
_hso_serial_set_termios(tty, old);
else
tty->termios = old;
@@ -1458,7 +1441,7 @@
/* how many characters in the buffer */
static int hso_serial_chars_in_buffer(struct tty_struct *tty)
{
- struct hso_serial *serial = get_serial_by_tty(tty);
+ struct hso_serial *serial = tty->driver_data;
int chars;
unsigned long flags;
@@ -1629,7 +1612,7 @@
struct serial_icounter_struct *icount)
{
struct uart_icount cnow;
- struct hso_serial *serial = get_serial_by_tty(tty);
+ struct hso_serial *serial = tty->driver_data;
struct hso_tiocmget *tiocmget = serial->tiocmget;
memset(icount, 0, sizeof(struct serial_icounter_struct));
@@ -1659,7 +1642,7 @@
static int hso_serial_tiocmget(struct tty_struct *tty)
{
int retval;
- struct hso_serial *serial = get_serial_by_tty(tty);
+ struct hso_serial *serial = tty->driver_data;
struct hso_tiocmget *tiocmget;
u16 UART_state_bitmap;
@@ -1693,7 +1676,7 @@
int val = 0;
unsigned long flags;
int if_num;
- struct hso_serial *serial = get_serial_by_tty(tty);
+ struct hso_serial *serial = tty->driver_data;
/* sanity check */
if (!serial) {
@@ -1733,7 +1716,7 @@
static int hso_serial_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
- struct hso_serial *serial = get_serial_by_tty(tty);
+ struct hso_serial *serial = tty->driver_data;
int ret = 0;
D4("IOCTL cmd: %d, arg: %ld", cmd, arg);
@@ -1905,7 +1888,7 @@
D1("Pending read interrupt on port %d\n", i);
spin_lock(&serial->serial_lock);
if (serial->rx_state == RX_IDLE &&
- serial->open_count > 0) {
+ serial->port.count > 0) {
/* Setup and send a ctrl req read on
* port i */
if (!serial->rx_urb_filled[0]) {
@@ -1954,14 +1937,13 @@
spin_lock(&serial->serial_lock);
serial->tx_urb_used = 0;
- tty = tty_kref_get(serial->tty);
spin_unlock(&serial->serial_lock);
if (status) {
handle_usb_error(status, __func__, serial->parent);
- tty_kref_put(tty);
return;
}
hso_put_activity(serial->parent);
+ tty = tty_port_tty_get(&serial->port);
if (tty) {
tty_wakeup(tty);
tty_kref_put(tty);
@@ -2001,7 +1983,6 @@
struct hso_serial *serial = urb->context;
struct usb_ctrlrequest *req;
int status = urb->status;
- struct tty_struct *tty;
/* sanity check */
if (!serial)
@@ -2009,11 +1990,9 @@
spin_lock(&serial->serial_lock);
serial->tx_urb_used = 0;
- tty = tty_kref_get(serial->tty);
spin_unlock(&serial->serial_lock);
if (status) {
handle_usb_error(status, __func__, serial->parent);
- tty_kref_put(tty);
return;
}
@@ -2031,13 +2010,15 @@
put_rxbuf_data_and_resubmit_ctrl_urb(serial);
spin_unlock(&serial->serial_lock);
} else {
+ struct tty_struct *tty = tty_port_tty_get(&serial->port);
hso_put_activity(serial->parent);
- if (tty)
+ if (tty) {
tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
/* response to a write command */
hso_kick_transmit(serial);
}
- tty_kref_put(tty);
}
/* handle RX data for serial port */
@@ -2053,8 +2034,7 @@
return -2;
}
- /* All callers to put_rxbuf_data hold serial_lock */
- tty = tty_kref_get(serial->tty);
+ tty = tty_port_tty_get(&serial->port);
/* Push data to tty */
if (tty) {
@@ -2074,12 +2054,12 @@
write_length_remaining -= curr_write_len;
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
}
if (write_length_remaining == 0) {
serial->curr_rx_urb_offset = 0;
serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
}
- tty_kref_put(tty);
return write_length_remaining;
}
@@ -2320,6 +2300,7 @@
serial->minor = minor;
serial->magic = HSO_SERIAL_MAGIC;
spin_lock_init(&serial->serial_lock);
+ tty_port_init(&serial->port);
serial->num_rx_urbs = num_urbs;
/* RX, allocate urb and initialize */
@@ -3098,7 +3079,7 @@
/* Start all serial ports */
for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
if (serial_table[i] && (serial_table[i]->interface == iface)) {
- if (dev2ser(serial_table[i])->open_count) {
+ if (dev2ser(serial_table[i])->port.count) {
result =
hso_start_serial_device(serial_table[i], GFP_NOIO);
hso_kick_transmit(dev2ser(serial_table[i]));
@@ -3172,13 +3153,12 @@
if (serial_table[i] &&
(serial_table[i]->interface == interface)) {
hso_dev = dev2ser(serial_table[i]);
- spin_lock_irq(&hso_dev->serial_lock);
- tty = tty_kref_get(hso_dev->tty);
- spin_unlock_irq(&hso_dev->serial_lock);
- if (tty)
+ tty = tty_port_tty_get(&hso_dev->port);
+ if (tty) {
tty_hangup(tty);
+ tty_kref_put(tty);
+ }
mutex_lock(&hso_dev->parent->mutex);
- tty_kref_put(tty);
hso_dev->parent->usb_gone = 1;
mutex_unlock(&hso_dev->parent->mutex);
kref_put(&serial_table[i]->ref, hso_serial_ref_free);
@@ -3313,7 +3293,6 @@
return -ENOMEM;
/* fill in all needed values */
- tty_drv->magic = TTY_DRIVER_MAGIC;
tty_drv->driver_name = driver_name;
tty_drv->name = tty_filename;
@@ -3334,7 +3313,7 @@
if (result) {
printk(KERN_ERR "%s - tty_register_driver failed(%d)\n",
__func__, result);
- return result;
+ goto err_free_tty;
}
/* register this module as an usb driver */
@@ -3342,13 +3321,16 @@
if (result) {
printk(KERN_ERR "Could not register hso driver? error: %d\n",
result);
- /* cleanup serial interface */
- tty_unregister_driver(tty_drv);
- return result;
+ goto err_unreg_tty;
}
/* done */
return 0;
+err_unreg_tty:
+ tty_unregister_driver(tty_drv);
+err_free_tty:
+ put_tty_driver(tty_drv);
+ return result;
}
static void __exit hso_exit(void)
@@ -3356,6 +3338,7 @@
printk(KERN_INFO "hso: unloaded\n");
tty_unregister_driver(tty_drv);
+ put_tty_driver(tty_drv);
/* deregister the usb driver */
usb_deregister(&hso_driver);
}
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 4f9f1dc..6c0116d 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -20,6 +20,7 @@
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/reboot.h>
+#include <linux/serial.h> /* ASYNC_* flags */
#include <linux/slab.h>
#include <asm/ccwdev.h>
#include <asm/cio.h>
@@ -44,14 +45,11 @@
#define RAW3215_TIMEOUT HZ/10 /* time for delayed output */
#define RAW3215_FIXED 1 /* 3215 console device is not be freed */
-#define RAW3215_ACTIVE 2 /* set if the device is in use */
#define RAW3215_WORKING 4 /* set if a request is being worked on */
#define RAW3215_THROTTLED 8 /* set if reading is disabled */
#define RAW3215_STOPPED 16 /* set if writing is disabled */
-#define RAW3215_CLOSING 32 /* set while in close process */
#define RAW3215_TIMER_RUNS 64 /* set if the output delay timer is on */
#define RAW3215_FLUSHING 128 /* set to flush buffer (no delay) */
-#define RAW3215_FROZEN 256 /* set if 3215 is frozen for suspend */
#define TAB_STOP_SIZE 8 /* tab stop size */
@@ -76,6 +74,7 @@
} __attribute__ ((aligned(8)));
struct raw3215_info {
+ struct tty_port port;
struct ccw_device *cdev; /* device for tty driver */
spinlock_t *lock; /* pointer to irq lock */
int flags; /* state flags */
@@ -84,7 +83,6 @@
int head; /* first free byte in output buffer */
int count; /* number of bytes in output buffer */
int written; /* number of bytes in write requests */
- struct tty_struct *tty; /* pointer to tty structure if present */
struct raw3215_req *queued_read; /* pointer to queued read requests */
struct raw3215_req *queued_write;/* pointer to queued write requests */
struct tasklet_struct tlet; /* tasklet to invoke tty_wakeup */
@@ -293,7 +291,7 @@
if (raw->flags & RAW3215_TIMER_RUNS) {
del_timer(&raw->timer);
raw->flags &= ~RAW3215_TIMER_RUNS;
- if (!(raw->flags & RAW3215_FROZEN)) {
+ if (!(raw->port.flags & ASYNC_SUSPENDED)) {
raw3215_mk_write_req(raw);
raw3215_start_io(raw);
}
@@ -309,7 +307,8 @@
*/
static inline void raw3215_try_io(struct raw3215_info *raw)
{
- if (!(raw->flags & RAW3215_ACTIVE) || (raw->flags & RAW3215_FROZEN))
+ if (!(raw->port.flags & ASYNC_INITIALIZED) ||
+ (raw->port.flags & ASYNC_SUSPENDED))
return;
if (raw->queued_read != NULL)
raw3215_start_io(raw);
@@ -324,10 +323,7 @@
}
} else if (!(raw->flags & RAW3215_TIMER_RUNS)) {
/* delay small writes */
- init_timer(&raw->timer);
raw->timer.expires = RAW3215_TIMEOUT + jiffies;
- raw->timer.data = (unsigned long) raw;
- raw->timer.function = raw3215_timeout;
add_timer(&raw->timer);
raw->flags |= RAW3215_TIMER_RUNS;
}
@@ -340,17 +336,21 @@
static void raw3215_wakeup(unsigned long data)
{
struct raw3215_info *raw = (struct raw3215_info *) data;
- tty_wakeup(raw->tty);
+ struct tty_struct *tty;
+
+ tty = tty_port_tty_get(&raw->port);
+ tty_wakeup(tty);
+ tty_kref_put(tty);
}
/*
* Try to start the next IO and wake up processes waiting on the tty.
*/
-static void raw3215_next_io(struct raw3215_info *raw)
+static void raw3215_next_io(struct raw3215_info *raw, struct tty_struct *tty)
{
raw3215_mk_write_req(raw);
raw3215_try_io(raw);
- if (raw->tty && RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE)
+ if (tty && RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE)
tasklet_schedule(&raw->tlet);
}
@@ -368,10 +368,11 @@
raw = dev_get_drvdata(&cdev->dev);
req = (struct raw3215_req *) intparm;
+ tty = tty_port_tty_get(&raw->port);
cstat = irb->scsw.cmd.cstat;
dstat = irb->scsw.cmd.dstat;
if (cstat != 0)
- raw3215_next_io(raw);
+ raw3215_next_io(raw, tty);
if (dstat & 0x01) { /* we got a unit exception */
dstat &= ~0x01; /* we can ignore it */
}
@@ -381,13 +382,13 @@
break;
/* Attention interrupt, someone hit the enter key */
raw3215_mk_read_req(raw);
- raw3215_next_io(raw);
+ raw3215_next_io(raw, tty);
break;
case 0x08:
case 0x0C:
/* Channel end interrupt. */
if ((raw = req->info) == NULL)
- return; /* That shouldn't happen ... */
+ goto put_tty; /* That shouldn't happen ... */
if (req->type == RAW3215_READ) {
/* store residual count, then wait for device end */
req->residual = irb->scsw.cmd.count;
@@ -397,11 +398,10 @@
case 0x04:
/* Device end interrupt. */
if ((raw = req->info) == NULL)
- return; /* That shouldn't happen ... */
- if (req->type == RAW3215_READ && raw->tty != NULL) {
+ goto put_tty; /* That shouldn't happen ... */
+ if (req->type == RAW3215_READ && tty != NULL) {
unsigned int cchar;
- tty = raw->tty;
count = 160 - req->residual;
EBCASC(raw->inbuf, count);
cchar = ctrlchar_handle(raw->inbuf, count, tty);
@@ -411,7 +411,7 @@
case CTRLCHAR_CTRL:
tty_insert_flip_char(tty, cchar, TTY_NORMAL);
- tty_flip_buffer_push(raw->tty);
+ tty_flip_buffer_push(tty);
break;
case CTRLCHAR_NONE:
@@ -424,7 +424,7 @@
} else
count -= 2;
tty_insert_flip_string(tty, raw->inbuf, count);
- tty_flip_buffer_push(raw->tty);
+ tty_flip_buffer_push(tty);
break;
}
} else if (req->type == RAW3215_WRITE) {
@@ -439,7 +439,7 @@
raw->queued_read == NULL) {
wake_up_interruptible(&raw->empty_wait);
}
- raw3215_next_io(raw);
+ raw3215_next_io(raw, tty);
break;
default:
/* Strange interrupt, I'll do my best to clean up */
@@ -451,9 +451,10 @@
raw->flags &= ~RAW3215_WORKING;
raw3215_free_req(req);
}
- raw3215_next_io(raw);
+ raw3215_next_io(raw, tty);
}
- return;
+put_tty:
+ tty_kref_put(tty);
}
/*
@@ -487,7 +488,7 @@
/* While console is frozen for suspend we have no other
* choice but to drop message from the buffer to make
* room for even more messages. */
- if (raw->flags & RAW3215_FROZEN) {
+ if (raw->port.flags & ASYNC_SUSPENDED) {
raw3215_drop_line(raw);
continue;
}
@@ -609,10 +610,10 @@
{
unsigned long flags;
- if (raw->flags & RAW3215_ACTIVE)
+ if (raw->port.flags & ASYNC_INITIALIZED)
return 0;
raw->line_pos = 0;
- raw->flags |= RAW3215_ACTIVE;
+ raw->port.flags |= ASYNC_INITIALIZED;
spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
raw3215_try_io(raw);
spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
@@ -628,14 +629,15 @@
DECLARE_WAITQUEUE(wait, current);
unsigned long flags;
- if (!(raw->flags & RAW3215_ACTIVE) || (raw->flags & RAW3215_FIXED))
+ if (!(raw->port.flags & ASYNC_INITIALIZED) ||
+ (raw->flags & RAW3215_FIXED))
return;
/* Wait for outstanding requests, then free irq */
spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
if ((raw->flags & RAW3215_WORKING) ||
raw->queued_write != NULL ||
raw->queued_read != NULL) {
- raw->flags |= RAW3215_CLOSING;
+ raw->port.flags |= ASYNC_CLOSING;
add_wait_queue(&raw->empty_wait, &wait);
set_current_state(TASK_INTERRUPTIBLE);
spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
@@ -643,11 +645,41 @@
spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
remove_wait_queue(&raw->empty_wait, &wait);
set_current_state(TASK_RUNNING);
- raw->flags &= ~(RAW3215_ACTIVE | RAW3215_CLOSING);
+ raw->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING);
}
spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
}
+static struct raw3215_info *raw3215_alloc_info(void)
+{
+ struct raw3215_info *info;
+
+ info = kzalloc(sizeof(struct raw3215_info), GFP_KERNEL | GFP_DMA);
+ if (!info)
+ return NULL;
+
+ info->buffer = kzalloc(RAW3215_BUFFER_SIZE, GFP_KERNEL | GFP_DMA);
+ info->inbuf = kzalloc(RAW3215_INBUF_SIZE, GFP_KERNEL | GFP_DMA);
+ if (!info->buffer || !info->inbuf) {
+ kfree(info);
+ return NULL;
+ }
+
+ setup_timer(&info->timer, raw3215_timeout, (unsigned long)info);
+ init_waitqueue_head(&info->empty_wait);
+ tasklet_init(&info->tlet, raw3215_wakeup, (unsigned long)info);
+ tty_port_init(&info->port);
+
+ return info;
+}
+
+static void raw3215_free_info(struct raw3215_info *raw)
+{
+ kfree(raw->inbuf);
+ kfree(raw->buffer);
+ kfree(raw);
+}
+
static int raw3215_probe (struct ccw_device *cdev)
{
struct raw3215_info *raw;
@@ -656,11 +688,15 @@
/* Console is special. */
if (raw3215[0] && (raw3215[0] == dev_get_drvdata(&cdev->dev)))
return 0;
- raw = kmalloc(sizeof(struct raw3215_info) +
- RAW3215_INBUF_SIZE, GFP_KERNEL|GFP_DMA);
+
+ raw = raw3215_alloc_info();
if (raw == NULL)
return -ENOMEM;
+ raw->cdev = cdev;
+ dev_set_drvdata(&cdev->dev, raw);
+ cdev->handler = raw3215_irq;
+
spin_lock(&raw3215_device_lock);
for (line = 0; line < NR_3215; line++) {
if (!raw3215[line]) {
@@ -670,28 +706,10 @@
}
spin_unlock(&raw3215_device_lock);
if (line == NR_3215) {
- kfree(raw);
+ raw3215_free_info(raw);
return -ENODEV;
}
- raw->cdev = cdev;
- raw->inbuf = (char *) raw + sizeof(struct raw3215_info);
- memset(raw, 0, sizeof(struct raw3215_info));
- raw->buffer = kmalloc(RAW3215_BUFFER_SIZE,
- GFP_KERNEL|GFP_DMA);
- if (raw->buffer == NULL) {
- spin_lock(&raw3215_device_lock);
- raw3215[line] = NULL;
- spin_unlock(&raw3215_device_lock);
- kfree(raw);
- return -ENOMEM;
- }
- init_waitqueue_head(&raw->empty_wait);
- tasklet_init(&raw->tlet, raw3215_wakeup, (unsigned long) raw);
-
- dev_set_drvdata(&cdev->dev, raw);
- cdev->handler = raw3215_irq;
-
return 0;
}
@@ -703,8 +721,7 @@
raw = dev_get_drvdata(&cdev->dev);
if (raw) {
dev_set_drvdata(&cdev->dev, NULL);
- kfree(raw->buffer);
- kfree(raw);
+ raw3215_free_info(raw);
}
}
@@ -741,7 +758,7 @@
raw = dev_get_drvdata(&cdev->dev);
spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
raw3215_make_room(raw, RAW3215_BUFFER_SIZE);
- raw->flags |= RAW3215_FROZEN;
+ raw->port.flags |= ASYNC_SUSPENDED;
spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
return 0;
}
@@ -754,7 +771,7 @@
/* Allow I/O again and flush output buffer. */
raw = dev_get_drvdata(&cdev->dev);
spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
- raw->flags &= ~RAW3215_FROZEN;
+ raw->port.flags &= ~ASYNC_SUSPENDED;
raw->flags |= RAW3215_FLUSHING;
raw3215_try_io(raw);
raw->flags &= ~RAW3215_FLUSHING;
@@ -827,7 +844,7 @@
unsigned long flags;
raw = raw3215[0]; /* console 3215 is the first one */
- if (raw->flags & RAW3215_FROZEN)
+ if (raw->port.flags & ASYNC_SUSPENDED)
/* The console is still frozen for suspend. */
if (ccw_device_force_console())
/* Forcing didn't work, no panic message .. */
@@ -897,23 +914,16 @@
if (IS_ERR(cdev))
return -ENODEV;
- raw3215[0] = raw = (struct raw3215_info *)
- kzalloc(sizeof(struct raw3215_info), GFP_KERNEL | GFP_DMA);
- raw->buffer = kzalloc(RAW3215_BUFFER_SIZE, GFP_KERNEL | GFP_DMA);
- raw->inbuf = kzalloc(RAW3215_INBUF_SIZE, GFP_KERNEL | GFP_DMA);
+ raw3215[0] = raw = raw3215_alloc_info();
raw->cdev = cdev;
dev_set_drvdata(&cdev->dev, raw);
cdev->handler = raw3215_irq;
raw->flags |= RAW3215_FIXED;
- init_waitqueue_head(&raw->empty_wait);
- tasklet_init(&raw->tlet, raw3215_wakeup, (unsigned long) raw);
/* Request the console irq */
if (raw3215_startup(raw) != 0) {
- kfree(raw->inbuf);
- kfree(raw->buffer);
- kfree(raw);
+ raw3215_free_info(raw);
raw3215[0] = NULL;
return -ENODEV;
}
@@ -940,7 +950,7 @@
return -ENODEV;
tty->driver_data = raw;
- raw->tty = tty;
+ tty_port_tty_set(&raw->port, tty);
tty->low_latency = 0; /* don't use bottom half for pushing chars */
/*
@@ -971,7 +981,7 @@
raw3215_shutdown(raw);
tasklet_kill(&raw->tlet);
tty->closing = 0;
- raw->tty = NULL;
+ tty_port_tty_set(&raw->port, NULL);
}
/*
diff --git a/drivers/s390/char/keyboard.c b/drivers/s390/char/keyboard.c
index 8065881..7ef9cfd 100644
--- a/drivers/s390/char/keyboard.c
+++ b/drivers/s390/char/keyboard.c
@@ -199,7 +199,7 @@
if (ch == ' ' || ch == d)
return d;
- kbd_put_queue(kbd->tty, d);
+ kbd_put_queue(kbd->port, d);
return ch;
}
@@ -221,7 +221,7 @@
{
if (kbd->diacr)
value = handle_diacr(kbd, value);
- kbd_put_queue(kbd->tty, value);
+ kbd_put_queue(kbd->port, value);
}
/*
@@ -239,7 +239,7 @@
k_fn(struct kbd_data *kbd, unsigned char value)
{
if (kbd->func_table[value])
- kbd_puts_queue(kbd->tty, kbd->func_table[value]);
+ kbd_puts_queue(kbd->port, kbd->func_table[value]);
}
static void
@@ -257,20 +257,20 @@
* but we need only 16 bits here
*/
static void
-to_utf8(struct tty_struct *tty, ushort c)
+to_utf8(struct tty_port *port, ushort c)
{
if (c < 0x80)
/* 0******* */
- kbd_put_queue(tty, c);
+ kbd_put_queue(port, c);
else if (c < 0x800) {
/* 110***** 10****** */
- kbd_put_queue(tty, 0xc0 | (c >> 6));
- kbd_put_queue(tty, 0x80 | (c & 0x3f));
+ kbd_put_queue(port, 0xc0 | (c >> 6));
+ kbd_put_queue(port, 0x80 | (c & 0x3f));
} else {
/* 1110**** 10****** 10****** */
- kbd_put_queue(tty, 0xe0 | (c >> 12));
- kbd_put_queue(tty, 0x80 | ((c >> 6) & 0x3f));
- kbd_put_queue(tty, 0x80 | (c & 0x3f));
+ kbd_put_queue(port, 0xe0 | (c >> 12));
+ kbd_put_queue(port, 0x80 | ((c >> 6) & 0x3f));
+ kbd_put_queue(port, 0x80 | (c & 0x3f));
}
}
@@ -283,7 +283,7 @@
unsigned short keysym;
unsigned char type, value;
- if (!kbd || !kbd->tty)
+ if (!kbd)
return;
if (keycode >= 384)
@@ -323,7 +323,7 @@
#endif
(*k_handler[type])(kbd, value);
} else
- to_utf8(kbd->tty, keysym);
+ to_utf8(kbd->port, keysym);
}
/*
@@ -457,6 +457,7 @@
int kbd_ioctl(struct kbd_data *kbd, unsigned int cmd, unsigned long arg)
{
+ struct tty_struct *tty;
void __user *argp;
unsigned int ct;
int perm;
@@ -467,7 +468,10 @@
* To have permissions to do most of the vt ioctls, we either have
* to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
*/
- perm = current->signal->tty == kbd->tty || capable(CAP_SYS_TTY_CONFIG);
+ tty = tty_port_tty_get(kbd->port);
+ /* FIXME this test is pretty racy */
+ perm = current->signal->tty == tty || capable(CAP_SYS_TTY_CONFIG);
+ tty_kref_put(tty);
switch (cmd) {
case KDGKBTYPE:
return put_user(KB_101, (char __user *)argp);
diff --git a/drivers/s390/char/keyboard.h b/drivers/s390/char/keyboard.h
index 7e736aa..f682f4e 100644
--- a/drivers/s390/char/keyboard.h
+++ b/drivers/s390/char/keyboard.h
@@ -21,7 +21,7 @@
*/
struct kbd_data {
- struct tty_struct *tty;
+ struct tty_port *port;
unsigned short **key_maps;
char **func_table;
fn_handler_fn **fn_handler;
@@ -42,16 +42,24 @@
* Helper Functions.
*/
static inline void
-kbd_put_queue(struct tty_struct *tty, int ch)
+kbd_put_queue(struct tty_port *port, int ch)
{
+ struct tty_struct *tty = tty_port_tty_get(port);
+ if (!tty)
+ return;
tty_insert_flip_char(tty, ch, 0);
tty_schedule_flip(tty);
+ tty_kref_put(tty);
}
static inline void
-kbd_puts_queue(struct tty_struct *tty, char *cp)
+kbd_puts_queue(struct tty_port *port, char *cp)
{
+ struct tty_struct *tty = tty_port_tty_get(port);
+ if (!tty)
+ return;
while (*cp)
tty_insert_flip_char(tty, *cp++, 0);
tty_schedule_flip(tty);
+ tty_kref_put(tty);
}
diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c
index 40a9d69..e66a75b 100644
--- a/drivers/s390/char/sclp_tty.c
+++ b/drivers/s390/char/sclp_tty.c
@@ -48,7 +48,7 @@
/* Timer for delayed output of console messages. */
static struct timer_list sclp_tty_timer;
-static struct tty_struct *sclp_tty;
+static struct tty_port sclp_port;
static unsigned char sclp_tty_chars[SCLP_TTY_BUF_SIZE];
static unsigned short int sclp_tty_chars_count;
@@ -64,7 +64,7 @@
static int
sclp_tty_open(struct tty_struct *tty, struct file *filp)
{
- sclp_tty = tty;
+ tty_port_tty_set(&sclp_port, tty);
tty->driver_data = NULL;
tty->low_latency = 0;
return 0;
@@ -76,7 +76,7 @@
{
if (tty->count > 1)
return;
- sclp_tty = NULL;
+ tty_port_tty_set(&sclp_port, NULL);
}
/*
@@ -108,6 +108,7 @@
static void
sclp_ttybuf_callback(struct sclp_buffer *buffer, int rc)
{
+ struct tty_struct *tty;
unsigned long flags;
void *page;
@@ -126,8 +127,10 @@
spin_unlock_irqrestore(&sclp_tty_lock, flags);
} while (buffer && sclp_emit_buffer(buffer, sclp_ttybuf_callback));
/* check if the tty needs a wake up call */
- if (sclp_tty != NULL) {
- tty_wakeup(sclp_tty);
+ tty = tty_port_tty_get(&sclp_port);
+ if (tty != NULL) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
}
}
@@ -326,21 +329,22 @@
static void
sclp_tty_input(unsigned char* buf, unsigned int count)
{
+ struct tty_struct *tty = tty_port_tty_get(&sclp_port);
unsigned int cchar;
/*
* If this tty driver is currently closed
* then throw the received input away.
*/
- if (sclp_tty == NULL)
+ if (tty == NULL)
return;
- cchar = ctrlchar_handle(buf, count, sclp_tty);
+ cchar = ctrlchar_handle(buf, count, tty);
switch (cchar & CTRLCHAR_MASK) {
case CTRLCHAR_SYSRQ:
break;
case CTRLCHAR_CTRL:
- tty_insert_flip_char(sclp_tty, cchar, TTY_NORMAL);
- tty_flip_buffer_push(sclp_tty);
+ tty_insert_flip_char(tty, cchar, TTY_NORMAL);
+ tty_flip_buffer_push(tty);
break;
case CTRLCHAR_NONE:
/* send (normal) input to line discipline */
@@ -348,13 +352,14 @@
(strncmp((const char *) buf + count - 2, "^n", 2) &&
strncmp((const char *) buf + count - 2, "\252n", 2))) {
/* add the auto \n */
- tty_insert_flip_string(sclp_tty, buf, count);
- tty_insert_flip_char(sclp_tty, '\n', TTY_NORMAL);
+ tty_insert_flip_string(tty, buf, count);
+ tty_insert_flip_char(tty, '\n', TTY_NORMAL);
} else
- tty_insert_flip_string(sclp_tty, buf, count - 2);
- tty_flip_buffer_push(sclp_tty);
+ tty_insert_flip_string(tty, buf, count - 2);
+ tty_flip_buffer_push(tty);
break;
}
+ tty_kref_put(tty);
}
/*
@@ -543,7 +548,7 @@
sclp_tty_tolower = 1;
}
sclp_tty_chars_count = 0;
- sclp_tty = NULL;
+ tty_port_init(&sclp_port);
rc = sclp_register(&sclp_input_event);
if (rc) {
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index b635472..edfc0fd 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -34,7 +34,6 @@
#define SCLP_VT220_DEVICE_NAME "ttysclp"
#define SCLP_VT220_CONSOLE_NAME "ttyS"
#define SCLP_VT220_CONSOLE_INDEX 1 /* console=ttyS1 */
-#define SCLP_VT220_BUF_SIZE 80
/* Representation of a single write request */
struct sclp_vt220_request {
@@ -56,8 +55,7 @@
/* Structures and data needed to register tty driver */
static struct tty_driver *sclp_vt220_driver;
-/* The tty_struct that the kernel associated with us */
-static struct tty_struct *sclp_vt220_tty;
+static struct tty_port sclp_vt220_port;
/* Lock to protect internal data from concurrent access */
static spinlock_t sclp_vt220_lock;
@@ -116,6 +114,7 @@
static void
sclp_vt220_process_queue(struct sclp_vt220_request *request)
{
+ struct tty_struct *tty;
unsigned long flags;
void *page;
@@ -141,8 +140,10 @@
if (request == NULL && sclp_vt220_flush_later)
sclp_vt220_emit_current();
/* Check if the tty needs a wake up call */
- if (sclp_vt220_tty != NULL) {
- tty_wakeup(sclp_vt220_tty);
+ tty = tty_port_tty_get(&sclp_vt220_port);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
}
}
@@ -460,11 +461,12 @@
static void
sclp_vt220_receiver_fn(struct evbuf_header *evbuf)
{
+ struct tty_struct *tty = tty_port_tty_get(&sclp_vt220_port);
char *buffer;
unsigned int count;
/* Ignore input if device is not open */
- if (sclp_vt220_tty == NULL)
+ if (tty == NULL)
return;
buffer = (char *) ((addr_t) evbuf + sizeof(struct evbuf_header));
@@ -478,10 +480,11 @@
/* Send input to line discipline */
buffer++;
count--;
- tty_insert_flip_string(sclp_vt220_tty, buffer, count);
- tty_flip_buffer_push(sclp_vt220_tty);
+ tty_insert_flip_string(tty, buffer, count);
+ tty_flip_buffer_push(tty);
break;
}
+ tty_kref_put(tty);
}
/*
@@ -491,10 +494,7 @@
sclp_vt220_open(struct tty_struct *tty, struct file *filp)
{
if (tty->count == 1) {
- sclp_vt220_tty = tty;
- tty->driver_data = kmalloc(SCLP_VT220_BUF_SIZE, GFP_KERNEL);
- if (tty->driver_data == NULL)
- return -ENOMEM;
+ tty_port_tty_set(&sclp_vt220_port, tty);
tty->low_latency = 0;
if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
tty->winsize.ws_row = 24;
@@ -510,11 +510,8 @@
static void
sclp_vt220_close(struct tty_struct *tty, struct file *filp)
{
- if (tty->count == 1) {
- sclp_vt220_tty = NULL;
- kfree(tty->driver_data);
- tty->driver_data = NULL;
- }
+ if (tty->count == 1)
+ tty_port_tty_set(&sclp_vt220_port, NULL);
}
/*
@@ -635,9 +632,9 @@
INIT_LIST_HEAD(&sclp_vt220_empty);
INIT_LIST_HEAD(&sclp_vt220_outqueue);
init_timer(&sclp_vt220_timer);
+ tty_port_init(&sclp_vt220_port);
sclp_vt220_current_request = NULL;
sclp_vt220_buffered_chars = 0;
- sclp_vt220_tty = NULL;
sclp_vt220_flush_later = 0;
/* Allocate pages for output buffering */
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index b43445a..10ec690 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -61,7 +61,7 @@
*/
struct tty3270 {
struct raw3270_view view;
- struct tty_struct *tty; /* Pointer to tty structure */
+ struct tty_port port;
void **freemem_pages; /* Array of pages used for freemem. */
struct list_head freemem; /* List of free memory for strings. */
@@ -324,9 +324,8 @@
static void
tty3270_write_callback(struct raw3270_request *rq, void *data)
{
- struct tty3270 *tp;
+ struct tty3270 *tp = container_of(rq->view, struct tty3270, view);
- tp = (struct tty3270 *) rq->view;
if (rq->rc != 0) {
/* Write wasn't successful. Refresh all. */
tp->update_flags = TTY_UPDATE_ALL;
@@ -450,10 +449,9 @@
static void
tty3270_rcl_backward(struct kbd_data *kbd)
{
- struct tty3270 *tp;
+ struct tty3270 *tp = container_of(kbd->port, struct tty3270, port);
struct string *s;
- tp = kbd->tty->driver_data;
spin_lock_bh(&tp->view.lock);
if (tp->inattr == TF_INPUT) {
if (tp->rcl_walk && tp->rcl_walk->prev != &tp->rcl_lines)
@@ -478,9 +476,8 @@
static void
tty3270_exit_tty(struct kbd_data *kbd)
{
- struct tty3270 *tp;
+ struct tty3270 *tp = container_of(kbd->port, struct tty3270, port);
- tp = kbd->tty->driver_data;
raw3270_deactivate_view(&tp->view);
}
@@ -490,10 +487,9 @@
static void
tty3270_scroll_forward(struct kbd_data *kbd)
{
- struct tty3270 *tp;
+ struct tty3270 *tp = container_of(kbd->port, struct tty3270, port);
int nr_up;
- tp = kbd->tty->driver_data;
spin_lock_bh(&tp->view.lock);
nr_up = tp->nr_up - tp->view.rows + 2;
if (nr_up < 0)
@@ -513,10 +509,9 @@
static void
tty3270_scroll_backward(struct kbd_data *kbd)
{
- struct tty3270 *tp;
+ struct tty3270 *tp = container_of(kbd->port, struct tty3270, port);
int nr_up;
- tp = kbd->tty->driver_data;
spin_lock_bh(&tp->view.lock);
nr_up = tp->nr_up + tp->view.rows - 2;
if (nr_up + tp->view.rows - 2 > tp->nr_lines)
@@ -537,11 +532,10 @@
tty3270_read_tasklet(struct raw3270_request *rrq)
{
static char kreset_data = TW_KR;
- struct tty3270 *tp;
+ struct tty3270 *tp = container_of(rrq->view, struct tty3270, view);
char *input;
int len;
- tp = (struct tty3270 *) rrq->view;
spin_lock_bh(&tp->view.lock);
/*
* Two AID keys are special: For 0x7d (enter) the input line
@@ -577,13 +571,10 @@
raw3270_request_add_data(tp->kreset, &kreset_data, 1);
raw3270_start(&tp->view, tp->kreset);
- /* Emit input string. */
- if (tp->tty) {
- while (len-- > 0)
- kbd_keycode(tp->kbd, *input++);
- /* Emit keycode for AID byte. */
- kbd_keycode(tp->kbd, 256 + tp->input->string[0]);
- }
+ while (len-- > 0)
+ kbd_keycode(tp->kbd, *input++);
+ /* Emit keycode for AID byte. */
+ kbd_keycode(tp->kbd, 256 + tp->input->string[0]);
raw3270_request_reset(rrq);
xchg(&tp->read, rrq);
@@ -596,9 +587,10 @@
static void
tty3270_read_callback(struct raw3270_request *rq, void *data)
{
+ struct tty3270 *tp = container_of(rq->view, struct tty3270, view);
raw3270_get_view(rq->view);
/* Schedule tasklet to pass input to tty. */
- tasklet_schedule(&((struct tty3270 *) rq->view)->readlet);
+ tasklet_schedule(&tp->readlet);
}
/*
@@ -635,9 +627,8 @@
static int
tty3270_activate(struct raw3270_view *view)
{
- struct tty3270 *tp;
+ struct tty3270 *tp = container_of(view, struct tty3270, view);
- tp = (struct tty3270 *) view;
tp->update_flags = TTY_UPDATE_ALL;
tty3270_set_timer(tp, 1);
return 0;
@@ -646,9 +637,8 @@
static void
tty3270_deactivate(struct raw3270_view *view)
{
- struct tty3270 *tp;
+ struct tty3270 *tp = container_of(view, struct tty3270, view);
- tp = (struct tty3270 *) view;
del_timer(&tp->timer);
}
@@ -690,6 +680,17 @@
if (!tp->freemem_pages)
goto out_tp;
INIT_LIST_HEAD(&tp->freemem);
+ INIT_LIST_HEAD(&tp->lines);
+ INIT_LIST_HEAD(&tp->update);
+ INIT_LIST_HEAD(&tp->rcl_lines);
+ tp->rcl_max = 20;
+ tty_port_init(&tp->port);
+ setup_timer(&tp->timer, (void (*)(unsigned long)) tty3270_update,
+ (unsigned long) tp);
+ tasklet_init(&tp->readlet,
+ (void (*)(unsigned long)) tty3270_read_tasklet,
+ (unsigned long) tp->read);
+
for (pages = 0; pages < TTY3270_STRING_PAGES; pages++) {
tp->freemem_pages[pages] = (void *)
__get_free_pages(GFP_KERNEL|GFP_DMA, 0);
@@ -794,16 +795,15 @@
static void
tty3270_release(struct raw3270_view *view)
{
- struct tty3270 *tp;
- struct tty_struct *tty;
+ struct tty3270 *tp = container_of(view, struct tty3270, view);
+ struct tty_struct *tty = tty_port_tty_get(&tp->port);
- tp = (struct tty3270 *) view;
- tty = tp->tty;
if (tty) {
tty->driver_data = NULL;
- tp->tty = tp->kbd->tty = NULL;
+ tty_port_tty_set(&tp->port, NULL);
tty_hangup(tty);
raw3270_put_view(&tp->view);
+ tty_kref_put(tty);
}
}
@@ -813,8 +813,9 @@
static void
tty3270_free(struct raw3270_view *view)
{
- tty3270_free_screen((struct tty3270 *) view);
- tty3270_free_view((struct tty3270 *) view);
+ struct tty3270 *tp = container_of(view, struct tty3270, view);
+ tty3270_free_screen(tp);
+ tty3270_free_view(tp);
}
/*
@@ -823,14 +824,13 @@
static void
tty3270_del_views(void)
{
- struct tty3270 *tp;
int i;
for (i = 0; i < tty3270_max_index; i++) {
- tp = (struct tty3270 *)
+ struct raw3270_view *view =
raw3270_find_view(&tty3270_fn, i + RAW3270_FIRSTMINOR);
- if (!IS_ERR(tp))
- raw3270_del_view(&tp->view);
+ if (!IS_ERR(view))
+ raw3270_del_view(view);
}
}
@@ -848,22 +848,23 @@
static int
tty3270_open(struct tty_struct *tty, struct file * filp)
{
+ struct raw3270_view *view;
struct tty3270 *tp;
int i, rc;
if (tty->count > 1)
return 0;
/* Check if the tty3270 is already there. */
- tp = (struct tty3270 *)
- raw3270_find_view(&tty3270_fn,
+ view = raw3270_find_view(&tty3270_fn,
tty->index + RAW3270_FIRSTMINOR);
- if (!IS_ERR(tp)) {
+ if (!IS_ERR(view)) {
+ tp = container_of(view, struct tty3270, view);
tty->driver_data = tp;
tty->winsize.ws_row = tp->view.rows - 2;
tty->winsize.ws_col = tp->view.cols;
tty->low_latency = 0;
- tp->tty = tty;
- tp->kbd->tty = tty;
+ /* why to reassign? */
+ tty_port_tty_set(&tp->port, tty);
tp->inattr = TF_INPUT;
return 0;
}
@@ -871,7 +872,7 @@
tty3270_max_index = tty->index + 1;
/* Quick exit if there is no device for tty->index. */
- if (PTR_ERR(tp) == -ENODEV)
+ if (PTR_ERR(view) == -ENODEV)
return -ENODEV;
/* Allocate tty3270 structure on first open. */
@@ -879,16 +880,6 @@
if (IS_ERR(tp))
return PTR_ERR(tp);
- INIT_LIST_HEAD(&tp->lines);
- INIT_LIST_HEAD(&tp->update);
- INIT_LIST_HEAD(&tp->rcl_lines);
- tp->rcl_max = 20;
- setup_timer(&tp->timer, (void (*)(unsigned long)) tty3270_update,
- (unsigned long) tp);
- tasklet_init(&tp->readlet,
- (void (*)(unsigned long)) tty3270_read_tasklet,
- (unsigned long) tp->read);
-
rc = raw3270_add_view(&tp->view, &tty3270_fn,
tty->index + RAW3270_FIRSTMINOR);
if (rc) {
@@ -903,7 +894,7 @@
return rc;
}
- tp->tty = tty;
+ tty_port_tty_set(&tp->port, tty);
tty->low_latency = 0;
tty->driver_data = tp;
tty->winsize.ws_row = tp->view.rows - 2;
@@ -917,7 +908,7 @@
for (i = 0; i < tp->view.rows - 2; i++)
tty3270_blank_line(tp);
- tp->kbd->tty = tty;
+ tp->kbd->port = &tp->port;
tp->kbd->fn_handler[KVAL(K_INCRCONSOLE)] = tty3270_exit_tty;
tp->kbd->fn_handler[KVAL(K_SCROLLBACK)] = tty3270_scroll_backward;
tp->kbd->fn_handler[KVAL(K_SCROLLFORW)] = tty3270_scroll_forward;
@@ -935,14 +926,13 @@
static void
tty3270_close(struct tty_struct *tty, struct file * filp)
{
- struct tty3270 *tp;
+ struct tty3270 *tp = tty->driver_data;
if (tty->count > 1)
return;
- tp = (struct tty3270 *) tty->driver_data;
if (tp) {
tty->driver_data = NULL;
- tp->tty = tp->kbd->tty = NULL;
+ tty_port_tty_set(&tp->port, NULL);
raw3270_put_view(&tp->view);
}
}
@@ -1391,7 +1381,7 @@
tty3270_lf(tp);
break;
case 'Z': /* Respond ID. */
- kbd_puts_queue(tp->tty, "\033[?6c");
+ kbd_puts_queue(&tp->port, "\033[?6c");
break;
case '7': /* Save cursor position. */
tp->saved_cx = tp->cx;
@@ -1437,11 +1427,11 @@
tp->esc_state = ESnormal;
if (ch == 'n' && !tp->esc_ques) {
if (tp->esc_par[0] == 5) /* Status report. */
- kbd_puts_queue(tp->tty, "\033[0n");
+ kbd_puts_queue(&tp->port, "\033[0n");
else if (tp->esc_par[0] == 6) { /* Cursor report. */
char buf[40];
sprintf(buf, "\033[%d;%dR", tp->cy + 1, tp->cx + 1);
- kbd_puts_queue(tp->tty, buf);
+ kbd_puts_queue(&tp->port, buf);
}
return;
}
@@ -1513,12 +1503,13 @@
* String write routine for 3270 ttys
*/
static void
-tty3270_do_write(struct tty3270 *tp, const unsigned char *buf, int count)
+tty3270_do_write(struct tty3270 *tp, struct tty_struct *tty,
+ const unsigned char *buf, int count)
{
int i_msg, i;
spin_lock_bh(&tp->view.lock);
- for (i_msg = 0; !tp->tty->stopped && i_msg < count; i_msg++) {
+ for (i_msg = 0; !tty->stopped && i_msg < count; i_msg++) {
if (tp->esc_state != 0) {
/* Continue escape sequence. */
tty3270_escape_sequence(tp, buf[i_msg]);
@@ -1595,10 +1586,10 @@
if (!tp)
return 0;
if (tp->char_count > 0) {
- tty3270_do_write(tp, tp->char_buf, tp->char_count);
+ tty3270_do_write(tp, tty, tp->char_buf, tp->char_count);
tp->char_count = 0;
}
- tty3270_do_write(tp, buf, count);
+ tty3270_do_write(tp, tty, buf, count);
return count;
}
@@ -1629,7 +1620,7 @@
if (!tp)
return;
if (tp->char_count > 0) {
- tty3270_do_write(tp, tp->char_buf, tp->char_count);
+ tty3270_do_write(tp, tty, tp->char_buf, tp->char_count);
tp->char_count = 0;
}
}
diff --git a/drivers/staging/serial/68360serial.c b/drivers/staging/serial/68360serial.c
index daf0b1d..23ee50e 100644
--- a/drivers/staging/serial/68360serial.c
+++ b/drivers/staging/serial/68360serial.c
@@ -1859,9 +1859,9 @@
printk("block_til_ready blocking: ttys%d, count = %d\n",
info->line, state->count);
#endif
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
current->state = TASK_RUNNING;
remove_wait_queue(&info->open_wait, &wait);
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 6cc4358..35819e3 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1033,7 +1033,7 @@
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
- tty_lock();
+ tty_lock(tty);
tmp.line = tty->index;
tmp.port = state->port;
tmp.flags = state->tport.flags;
@@ -1042,7 +1042,7 @@
tmp.close_delay = state->tport.close_delay;
tmp.closing_wait = state->tport.closing_wait;
tmp.custom_divisor = state->custom_divisor;
- tty_unlock();
+ tty_unlock(tty);
if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
return -EFAULT;
return 0;
@@ -1059,12 +1059,12 @@
if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
return -EFAULT;
- tty_lock();
+ tty_lock(tty);
change_spd = ((new_serial.flags ^ port->flags) & ASYNC_SPD_MASK) ||
new_serial.custom_divisor != state->custom_divisor;
if (new_serial.irq || new_serial.port != state->port ||
new_serial.xmit_fifo_size != state->xmit_fifo_size) {
- tty_unlock();
+ tty_unlock(tty);
return -EINVAL;
}
@@ -1074,7 +1074,7 @@
(new_serial.xmit_fifo_size != state->xmit_fifo_size) ||
((new_serial.flags & ~ASYNC_USR_MASK) !=
(port->flags & ~ASYNC_USR_MASK))) {
- tty_unlock();
+ tty_unlock(tty);
return -EPERM;
}
port->flags = ((port->flags & ~ASYNC_USR_MASK) |
@@ -1084,7 +1084,7 @@
}
if (new_serial.baud_base < 9600) {
- tty_unlock();
+ tty_unlock(tty);
return -EINVAL;
}
@@ -1116,7 +1116,7 @@
}
} else
retval = startup(tty, state);
- tty_unlock();
+ tty_unlock(tty);
return retval;
}
diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c
index 946f799..61fc74f 100644
--- a/drivers/tty/bfin_jtag_comm.c
+++ b/drivers/tty/bfin_jtag_comm.c
@@ -62,9 +62,7 @@
static struct tty_driver *bfin_jc_driver;
static struct task_struct *bfin_jc_kthread;
-static struct tty_struct * volatile bfin_jc_tty;
-static unsigned long bfin_jc_count;
-static DEFINE_MUTEX(bfin_jc_tty_mutex);
+static struct tty_port port;
static volatile struct circ_buf bfin_jc_write_buf;
static int
@@ -73,18 +71,21 @@
uint32_t inbound_len = 0, outbound_len = 0;
while (!kthread_should_stop()) {
+ struct tty_struct *tty = tty_port_tty_get(&port);
/* no one left to give data to, so sleep */
- if (bfin_jc_tty == NULL && circ_empty(&bfin_jc_write_buf)) {
+ if (tty == NULL && circ_empty(&bfin_jc_write_buf)) {
pr_debug("waiting for readers\n");
__set_current_state(TASK_UNINTERRUPTIBLE);
schedule();
__set_current_state(TASK_RUNNING);
+ continue;
}
/* no data available, so just chill */
if (!(bfin_read_DBGSTAT() & EMUDIF) && circ_empty(&bfin_jc_write_buf)) {
pr_debug("waiting for data (in_len = %i) (circ: %i %i)\n",
inbound_len, bfin_jc_write_buf.tail, bfin_jc_write_buf.head);
+ tty_kref_put(tty);
if (inbound_len)
schedule();
else
@@ -94,9 +95,6 @@
/* if incoming data is ready, eat it */
if (bfin_read_DBGSTAT() & EMUDIF) {
- struct tty_struct *tty;
- mutex_lock(&bfin_jc_tty_mutex);
- tty = (struct tty_struct *)bfin_jc_tty;
if (tty != NULL) {
uint32_t emudat = bfin_read_emudat();
if (inbound_len == 0) {
@@ -110,7 +108,6 @@
tty_flip_buffer_push(tty);
}
}
- mutex_unlock(&bfin_jc_tty_mutex);
}
/* if outgoing data is ready, post it */
@@ -120,7 +117,6 @@
bfin_write_emudat(outbound_len);
pr_debug("outgoing length: 0x%08x\n", outbound_len);
} else {
- struct tty_struct *tty;
int tail = bfin_jc_write_buf.tail;
size_t ate = (4 <= outbound_len ? 4 : outbound_len);
uint32_t emudat =
@@ -132,14 +128,12 @@
);
bfin_jc_write_buf.tail += ate;
outbound_len -= ate;
- mutex_lock(&bfin_jc_tty_mutex);
- tty = (struct tty_struct *)bfin_jc_tty;
if (tty)
tty_wakeup(tty);
- mutex_unlock(&bfin_jc_tty_mutex);
pr_debug(" outgoing data: 0x%08x (pushing %zu)\n", emudat, ate);
}
}
+ tty_kref_put(tty);
}
__set_current_state(TASK_RUNNING);
@@ -149,24 +143,28 @@
static int
bfin_jc_open(struct tty_struct *tty, struct file *filp)
{
- mutex_lock(&bfin_jc_tty_mutex);
- pr_debug("open %lu\n", bfin_jc_count);
- ++bfin_jc_count;
- bfin_jc_tty = tty;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port.lock, flags);
+ port.count++;
+ spin_unlock_irqrestore(&port.lock, flags);
+ tty_port_tty_set(&port, tty);
wake_up_process(bfin_jc_kthread);
- mutex_unlock(&bfin_jc_tty_mutex);
return 0;
}
static void
bfin_jc_close(struct tty_struct *tty, struct file *filp)
{
- mutex_lock(&bfin_jc_tty_mutex);
- pr_debug("close %lu\n", bfin_jc_count);
- if (--bfin_jc_count == 0)
- bfin_jc_tty = NULL;
+ unsigned long flags;
+ bool last;
+
+ spin_lock_irqsave(&port.lock, flags);
+ last = --port.count == 0;
+ spin_unlock_irqrestore(&port.lock, flags);
+ if (last)
+ tty_port_tty_set(&port, NULL);
wake_up_process(bfin_jc_kthread);
- mutex_unlock(&bfin_jc_tty_mutex);
}
/* XXX: we dont handle the put_char() case where we must handle count = 1 */
@@ -242,6 +240,8 @@
{
int ret;
+ tty_port_init(&port);
+
bfin_jc_kthread = kthread_create(bfin_jc_emudat_manager, NULL, DRV_NAME);
if (IS_ERR(bfin_jc_kthread))
return PTR_ERR(bfin_jc_kthread);
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index e61cabd..6984e1a 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -1599,7 +1599,7 @@
* If the port is the middle of closing, bail out now
*/
if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
- wait_event_interruptible_tty(info->port.close_wait,
+ wait_event_interruptible_tty(tty, info->port.close_wait,
!(info->port.flags & ASYNC_CLOSING));
return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
}
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 8880adf..2d691eb 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -107,7 +107,7 @@
list_for_each_entry(hp, &hvc_structs, next) {
spin_lock_irqsave(&hp->lock, flags);
if (hp->index == index) {
- kref_get(&hp->kref);
+ tty_port_get(&hp->port);
spin_unlock_irqrestore(&hp->lock, flags);
spin_unlock(&hvc_structs_lock);
return hp;
@@ -229,9 +229,9 @@
console_initcall(hvc_console_init);
/* callback when the kboject ref count reaches zero. */
-static void destroy_hvc_struct(struct kref *kref)
+static void hvc_port_destruct(struct tty_port *port)
{
- struct hvc_struct *hp = container_of(kref, struct hvc_struct, kref);
+ struct hvc_struct *hp = container_of(port, struct hvc_struct, port);
unsigned long flags;
spin_lock(&hvc_structs_lock);
@@ -264,7 +264,7 @@
/* make sure no no tty has been registered in this index */
hp = hvc_get_by_index(index);
if (hp) {
- kref_put(&hp->kref, destroy_hvc_struct);
+ tty_port_put(&hp->port);
return -1;
}
@@ -313,20 +313,17 @@
if (!(hp = hvc_get_by_index(tty->index)))
return -ENODEV;
- spin_lock_irqsave(&hp->lock, flags);
+ spin_lock_irqsave(&hp->port.lock, flags);
/* Check and then increment for fast path open. */
- if (hp->count++ > 0) {
- tty_kref_get(tty);
- spin_unlock_irqrestore(&hp->lock, flags);
+ if (hp->port.count++ > 0) {
+ spin_unlock_irqrestore(&hp->port.lock, flags);
hvc_kick();
return 0;
} /* else count == 0 */
+ spin_unlock_irqrestore(&hp->port.lock, flags);
tty->driver_data = hp;
-
- hp->tty = tty_kref_get(tty);
-
- spin_unlock_irqrestore(&hp->lock, flags);
+ tty_port_tty_set(&hp->port, tty);
if (hp->ops->notifier_add)
rc = hp->ops->notifier_add(hp, hp->data);
@@ -338,12 +335,9 @@
* tty fields and return the kref reference.
*/
if (rc) {
- spin_lock_irqsave(&hp->lock, flags);
- hp->tty = NULL;
- spin_unlock_irqrestore(&hp->lock, flags);
- tty_kref_put(tty);
+ tty_port_tty_set(&hp->port, NULL);
tty->driver_data = NULL;
- kref_put(&hp->kref, destroy_hvc_struct);
+ tty_port_put(&hp->port);
printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc);
}
/* Force wakeup of the polling thread */
@@ -370,12 +364,12 @@
hp = tty->driver_data;
- spin_lock_irqsave(&hp->lock, flags);
+ spin_lock_irqsave(&hp->port.lock, flags);
- if (--hp->count == 0) {
+ if (--hp->port.count == 0) {
+ spin_unlock_irqrestore(&hp->port.lock, flags);
/* We are done with the tty pointer now. */
- hp->tty = NULL;
- spin_unlock_irqrestore(&hp->lock, flags);
+ tty_port_tty_set(&hp->port, NULL);
if (hp->ops->notifier_del)
hp->ops->notifier_del(hp, hp->data);
@@ -390,14 +384,13 @@
*/
tty_wait_until_sent_from_close(tty, HVC_CLOSE_WAIT);
} else {
- if (hp->count < 0)
+ if (hp->port.count < 0)
printk(KERN_ERR "hvc_close %X: oops, count is %d\n",
- hp->vtermno, hp->count);
- spin_unlock_irqrestore(&hp->lock, flags);
+ hp->vtermno, hp->port.count);
+ spin_unlock_irqrestore(&hp->port.lock, flags);
}
- tty_kref_put(tty);
- kref_put(&hp->kref, destroy_hvc_struct);
+ tty_port_put(&hp->port);
}
static void hvc_hangup(struct tty_struct *tty)
@@ -412,32 +405,31 @@
/* cancel pending tty resize work */
cancel_work_sync(&hp->tty_resize);
- spin_lock_irqsave(&hp->lock, flags);
+ spin_lock_irqsave(&hp->port.lock, flags);
/*
* The N_TTY line discipline has problems such that in a close vs
* open->hangup case this can be called after the final close so prevent
* that from happening for now.
*/
- if (hp->count <= 0) {
- spin_unlock_irqrestore(&hp->lock, flags);
+ if (hp->port.count <= 0) {
+ spin_unlock_irqrestore(&hp->port.lock, flags);
return;
}
- temp_open_count = hp->count;
- hp->count = 0;
- hp->n_outbuf = 0;
- hp->tty = NULL;
+ temp_open_count = hp->port.count;
+ hp->port.count = 0;
+ spin_unlock_irqrestore(&hp->port.lock, flags);
+ tty_port_tty_set(&hp->port, NULL);
- spin_unlock_irqrestore(&hp->lock, flags);
+ hp->n_outbuf = 0;
if (hp->ops->notifier_hangup)
hp->ops->notifier_hangup(hp, hp->data);
while(temp_open_count) {
--temp_open_count;
- tty_kref_put(tty);
- kref_put(&hp->kref, destroy_hvc_struct);
+ tty_port_put(&hp->port);
}
}
@@ -478,7 +470,8 @@
if (!hp)
return -EPIPE;
- if (hp->count <= 0)
+ /* FIXME what's this (unprotected) check for? */
+ if (hp->port.count <= 0)
return -EIO;
spin_lock_irqsave(&hp->lock, flags);
@@ -526,13 +519,12 @@
hp = container_of(work, struct hvc_struct, tty_resize);
- spin_lock_irqsave(&hp->lock, hvc_flags);
- if (!hp->tty) {
- spin_unlock_irqrestore(&hp->lock, hvc_flags);
+ tty = tty_port_tty_get(&hp->port);
+ if (!tty)
return;
- }
- ws = hp->ws;
- tty = tty_kref_get(hp->tty);
+
+ spin_lock_irqsave(&hp->lock, hvc_flags);
+ ws = hp->ws;
spin_unlock_irqrestore(&hp->lock, hvc_flags);
tty_do_resize(tty, &ws);
@@ -601,7 +593,7 @@
}
/* No tty attached, just skip */
- tty = tty_kref_get(hp->tty);
+ tty = tty_port_tty_get(&hp->port);
if (tty == NULL)
goto bail;
@@ -681,8 +673,7 @@
tty_flip_buffer_push(tty);
}
- if (tty)
- tty_kref_put(tty);
+ tty_kref_put(tty);
return poll_mask;
}
@@ -817,6 +808,10 @@
#endif
};
+static const struct tty_port_operations hvc_port_ops = {
+ .destruct = hvc_port_destruct,
+};
+
struct hvc_struct *hvc_alloc(uint32_t vtermno, int data,
const struct hv_ops *ops,
int outbuf_size)
@@ -842,7 +837,8 @@
hp->outbuf_size = outbuf_size;
hp->outbuf = &((char *)hp)[ALIGN(sizeof(*hp), sizeof(long))];
- kref_init(&hp->kref);
+ tty_port_init(&hp->port);
+ hp->port.ops = &hvc_port_ops;
INIT_WORK(&hp->tty_resize, hvc_set_winsz);
spin_lock_init(&hp->lock);
@@ -875,9 +871,9 @@
unsigned long flags;
struct tty_struct *tty;
- spin_lock_irqsave(&hp->lock, flags);
- tty = tty_kref_get(hp->tty);
+ tty = tty_port_tty_get(&hp->port);
+ spin_lock_irqsave(&hp->lock, flags);
if (hp->index < MAX_NR_HVC_CONSOLES)
vtermnos[hp->index] = -1;
@@ -891,7 +887,7 @@
* kref cause it to be removed, which will probably be the tty_vhangup
* below.
*/
- kref_put(&hp->kref, destroy_hvc_struct);
+ tty_port_put(&hp->port);
/*
* This function call will auto chain call hvc_hangup.
diff --git a/drivers/tty/hvc/hvc_console.h b/drivers/tty/hvc/hvc_console.h
index c335a14..674d23c 100644
--- a/drivers/tty/hvc/hvc_console.h
+++ b/drivers/tty/hvc/hvc_console.h
@@ -46,10 +46,9 @@
#define HVC_ALLOC_TTY_ADAPTERS 8
struct hvc_struct {
+ struct tty_port port;
spinlock_t lock;
int index;
- struct tty_struct *tty;
- int count;
int do_wakeup;
char *outbuf;
int outbuf_size;
@@ -61,7 +60,6 @@
struct winsize ws;
struct work_struct tty_resize;
struct list_head next;
- struct kref kref; /* ref count & hvc_struct lifetime */
};
/* implemented by a low level driver */
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index 83d5c88..d3d91da 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -430,9 +430,9 @@
if (devid == 0)
return -ENODEV;
- info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL | __GFP_ZERO);
+ info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL);
if (!info)
- goto error_nomem;
+ return -ENOMEM;
dev_set_drvdata(&dev->dev, info);
info->xbdev = dev;
info->vtermno = xenbus_devid_to_vtermno(devid);
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 3436436..d56788c 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -261,6 +261,7 @@
/* One vty-server per hvcs_struct */
struct hvcs_struct {
+ struct tty_port port;
spinlock_t lock;
/*
@@ -269,9 +270,6 @@
*/
unsigned int index;
- struct tty_struct *tty;
- int open_count;
-
/*
* Used to tell the driver kernel_thread what operations need to take
* place upon this hvcs_struct instance.
@@ -290,12 +288,11 @@
int chars_in_buffer;
/*
- * Any variable below the kref is valid before a tty is connected and
+ * Any variable below is valid before a tty is connected and
* stays valid after the tty is disconnected. These shouldn't be
* whacked until the kobject refcount reaches zero though some entries
* may be changed via sysfs initiatives.
*/
- struct kref kref; /* ref count & hvcs_struct lifetime */
int connected; /* is the vty-server currently connected to a vty? */
uint32_t p_unit_address; /* partner unit address */
uint32_t p_partition_ID; /* partner partition ID */
@@ -304,9 +301,6 @@
struct vio_dev *vdev;
};
-/* Required to back map a kref to its containing object */
-#define from_kref(k) container_of(k, struct hvcs_struct, kref)
-
static LIST_HEAD(hvcs_structs);
static DEFINE_SPINLOCK(hvcs_structs_lock);
static DEFINE_MUTEX(hvcs_init_mutex);
@@ -422,7 +416,7 @@
spin_lock_irqsave(&hvcsd->lock, flags);
- if (hvcsd->open_count > 0) {
+ if (hvcsd->port.count > 0) {
spin_unlock_irqrestore(&hvcsd->lock, flags);
printk(KERN_INFO "HVCS: vterm state unchanged. "
"The hvcs device node is still in use.\n");
@@ -564,7 +558,7 @@
static void hvcs_try_write(struct hvcs_struct *hvcsd)
{
uint32_t unit_address = hvcsd->vdev->unit_address;
- struct tty_struct *tty = hvcsd->tty;
+ struct tty_struct *tty = hvcsd->port.tty;
int sent;
if (hvcsd->todo_mask & HVCS_TRY_WRITE) {
@@ -602,7 +596,7 @@
spin_lock_irqsave(&hvcsd->lock, flags);
unit_address = hvcsd->vdev->unit_address;
- tty = hvcsd->tty;
+ tty = hvcsd->port.tty;
hvcs_try_write(hvcsd);
@@ -701,10 +695,9 @@
hvcs_index_list[index] = -1;
}
-/* callback when the kref ref count reaches zero */
-static void destroy_hvcs_struct(struct kref *kref)
+static void hvcs_destruct_port(struct tty_port *p)
{
- struct hvcs_struct *hvcsd = from_kref(kref);
+ struct hvcs_struct *hvcsd = container_of(p, struct hvcs_struct, port);
struct vio_dev *vdev;
unsigned long flags;
@@ -741,6 +734,10 @@
kfree(hvcsd);
}
+static const struct tty_port_operations hvcs_port_ops = {
+ .destruct = hvcs_destruct_port,
+};
+
static int hvcs_get_index(void)
{
int i;
@@ -789,10 +786,9 @@
if (!hvcsd)
return -ENODEV;
-
+ tty_port_init(&hvcsd->port);
+ hvcsd->port.ops = &hvcs_port_ops;
spin_lock_init(&hvcsd->lock);
- /* Automatically incs the refcount the first time */
- kref_init(&hvcsd->kref);
hvcsd->vdev = dev;
dev_set_drvdata(&dev->dev, hvcsd);
@@ -852,7 +848,7 @@
spin_lock_irqsave(&hvcsd->lock, flags);
- tty = hvcsd->tty;
+ tty = hvcsd->port.tty;
spin_unlock_irqrestore(&hvcsd->lock, flags);
@@ -860,7 +856,7 @@
* Let the last holder of this object cause it to be removed, which
* would probably be tty_hangup below.
*/
- kref_put(&hvcsd->kref, destroy_hvcs_struct);
+ tty_port_put(&hvcsd->port);
/*
* The hangup is a scheduled function which will auto chain call
@@ -1094,7 +1090,7 @@
list_for_each_entry(hvcsd, &hvcs_structs, next) {
spin_lock_irqsave(&hvcsd->lock, flags);
if (hvcsd->index == index) {
- kref_get(&hvcsd->kref);
+ tty_port_get(&hvcsd->port);
spin_unlock_irqrestore(&hvcsd->lock, flags);
spin_unlock(&hvcs_structs_lock);
return hvcsd;
@@ -1138,8 +1134,8 @@
if ((retval = hvcs_partner_connect(hvcsd)))
goto error_release;
- hvcsd->open_count = 1;
- hvcsd->tty = tty;
+ hvcsd->port.count = 1;
+ hvcsd->port.tty = tty;
tty->driver_data = hvcsd;
memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN);
@@ -1160,7 +1156,7 @@
* and will grab the spinlock and free the connection if it fails.
*/
if (((rc = hvcs_enable_device(hvcsd, unit_address, irq, vdev)))) {
- kref_put(&hvcsd->kref, destroy_hvcs_struct);
+ tty_port_put(&hvcsd->port);
printk(KERN_WARNING "HVCS: enable device failed.\n");
return rc;
}
@@ -1171,8 +1167,8 @@
hvcsd = tty->driver_data;
spin_lock_irqsave(&hvcsd->lock, flags);
- kref_get(&hvcsd->kref);
- hvcsd->open_count++;
+ tty_port_get(&hvcsd->port);
+ hvcsd->port.count++;
hvcsd->todo_mask |= HVCS_SCHED_READ;
spin_unlock_irqrestore(&hvcsd->lock, flags);
@@ -1186,7 +1182,7 @@
error_release:
spin_unlock_irqrestore(&hvcsd->lock, flags);
- kref_put(&hvcsd->kref, destroy_hvcs_struct);
+ tty_port_put(&hvcsd->port);
printk(KERN_WARNING "HVCS: partner connect failed.\n");
return retval;
@@ -1216,7 +1212,7 @@
hvcsd = tty->driver_data;
spin_lock_irqsave(&hvcsd->lock, flags);
- if (--hvcsd->open_count == 0) {
+ if (--hvcsd->port.count == 0) {
vio_disable_interrupts(hvcsd->vdev);
@@ -1225,7 +1221,7 @@
* execute any operations on the TTY even though it is obligated
* to deliver any pending I/O to the hypervisor.
*/
- hvcsd->tty = NULL;
+ hvcsd->port.tty = NULL;
irq = hvcsd->vdev->irq;
spin_unlock_irqrestore(&hvcsd->lock, flags);
@@ -1240,16 +1236,16 @@
tty->driver_data = NULL;
free_irq(irq, hvcsd);
- kref_put(&hvcsd->kref, destroy_hvcs_struct);
+ tty_port_put(&hvcsd->port);
return;
- } else if (hvcsd->open_count < 0) {
+ } else if (hvcsd->port.count < 0) {
printk(KERN_ERR "HVCS: vty-server@%X open_count: %d"
" is missmanaged.\n",
- hvcsd->vdev->unit_address, hvcsd->open_count);
+ hvcsd->vdev->unit_address, hvcsd->port.count);
}
spin_unlock_irqrestore(&hvcsd->lock, flags);
- kref_put(&hvcsd->kref, destroy_hvcs_struct);
+ tty_port_put(&hvcsd->port);
}
static void hvcs_hangup(struct tty_struct * tty)
@@ -1261,7 +1257,7 @@
spin_lock_irqsave(&hvcsd->lock, flags);
/* Preserve this so that we know how many kref refs to put */
- temp_open_count = hvcsd->open_count;
+ temp_open_count = hvcsd->port.count;
/*
* Don't kref put inside the spinlock because the destruction
@@ -1273,10 +1269,10 @@
hvcsd->todo_mask = 0;
/* I don't think the tty needs the hvcs_struct pointer after a hangup */
- hvcsd->tty->driver_data = NULL;
- hvcsd->tty = NULL;
+ tty->driver_data = NULL;
+ hvcsd->port.tty = NULL;
- hvcsd->open_count = 0;
+ hvcsd->port.count = 0;
/* This will drop any buffered data on the floor which is OK in a hangup
* scenario. */
@@ -1301,7 +1297,7 @@
* NOTE: If this hangup was signaled from user space then the
* final put will never happen.
*/
- kref_put(&hvcsd->kref, destroy_hvcs_struct);
+ tty_port_put(&hvcsd->port);
}
}
@@ -1347,7 +1343,7 @@
* the middle of a write operation? This is a crummy place to do this
* but we want to keep it all in the spinlock.
*/
- if (hvcsd->open_count <= 0) {
+ if (hvcsd->port.count <= 0) {
spin_unlock_irqrestore(&hvcsd->lock, flags);
return -ENODEV;
}
@@ -1421,7 +1417,7 @@
{
struct hvcs_struct *hvcsd = tty->driver_data;
- if (!hvcsd || hvcsd->open_count <= 0)
+ if (!hvcsd || hvcsd->port.count <= 0)
return 0;
return HVCS_BUFF_LEN - hvcsd->chars_in_buffer;
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index a7488b7..6f5bc49 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -69,14 +69,13 @@
#define __ALIGNED__ __attribute__((__aligned__(sizeof(long))))
struct hvsi_struct {
+ struct tty_port port;
struct delayed_work writer;
struct work_struct handshaker;
wait_queue_head_t emptyq; /* woken when outbuf is emptied */
wait_queue_head_t stateq; /* woken when HVSI state changes */
spinlock_t lock;
int index;
- struct tty_struct *tty;
- int count;
uint8_t throttle_buf[128];
uint8_t outbuf[N_OUTBUF]; /* to implement write_room and chars_in_buffer */
/* inbuf is for packet reassembly. leave a little room for leftovers. */
@@ -237,7 +236,7 @@
}
static void hvsi_recv_control(struct hvsi_struct *hp, uint8_t *packet,
- struct tty_struct **to_hangup, struct hvsi_struct **to_handshake)
+ struct tty_struct *tty, struct hvsi_struct **to_handshake)
{
struct hvsi_control *header = (struct hvsi_control *)packet;
@@ -247,9 +246,8 @@
/* CD went away; no more connection */
pr_debug("hvsi%i: CD dropped\n", hp->index);
hp->mctrl &= TIOCM_CD;
- /* If userland hasn't done an open(2) yet, hp->tty is NULL. */
- if (hp->tty && !(hp->tty->flags & CLOCAL))
- *to_hangup = hp->tty;
+ if (tty && !C_CLOCAL(tty))
+ tty_hangup(tty);
}
break;
case VSV_CLOSE_PROTOCOL:
@@ -331,7 +329,8 @@
}
}
-static void hvsi_insert_chars(struct hvsi_struct *hp, const char *buf, int len)
+static void hvsi_insert_chars(struct hvsi_struct *hp, struct tty_struct *tty,
+ const char *buf, int len)
{
int i;
@@ -347,7 +346,7 @@
continue;
}
#endif /* CONFIG_MAGIC_SYSRQ */
- tty_insert_flip_char(hp->tty, c, 0);
+ tty_insert_flip_char(tty, c, 0);
}
}
@@ -360,7 +359,7 @@
* revisited.
*/
#define TTY_THRESHOLD_THROTTLE 128
-static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp,
+static bool hvsi_recv_data(struct hvsi_struct *hp, struct tty_struct *tty,
const uint8_t *packet)
{
const struct hvsi_header *header = (const struct hvsi_header *)packet;
@@ -371,14 +370,14 @@
pr_debug("queueing %i chars '%.*s'\n", datalen, datalen, data);
if (datalen == 0)
- return NULL;
+ return false;
if (overflow > 0) {
pr_debug("%s: got >TTY_THRESHOLD_THROTTLE bytes\n", __func__);
datalen = TTY_THRESHOLD_THROTTLE;
}
- hvsi_insert_chars(hp, data, datalen);
+ hvsi_insert_chars(hp, tty, data, datalen);
if (overflow > 0) {
/*
@@ -390,7 +389,7 @@
hp->n_throttle = overflow;
}
- return hp->tty;
+ return true;
}
/*
@@ -399,14 +398,13 @@
* machine during console handshaking (in which case tty = NULL and we ignore
* incoming data).
*/
-static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip,
- struct tty_struct **hangup, struct hvsi_struct **handshake)
+static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct *tty,
+ struct hvsi_struct **handshake)
{
uint8_t *packet = hp->inbuf;
int chunklen;
+ bool flip = false;
- *flip = NULL;
- *hangup = NULL;
*handshake = NULL;
chunklen = hvsi_read(hp, hp->inbuf_end, HVSI_MAX_READ);
@@ -440,12 +438,12 @@
case VS_DATA_PACKET_HEADER:
if (!is_open(hp))
break;
- if (hp->tty == NULL)
+ if (tty == NULL)
break; /* no tty buffer to put data in */
- *flip = hvsi_recv_data(hp, packet);
+ flip = hvsi_recv_data(hp, tty, packet);
break;
case VS_CONTROL_PACKET_HEADER:
- hvsi_recv_control(hp, packet, hangup, handshake);
+ hvsi_recv_control(hp, packet, tty, handshake);
break;
case VS_QUERY_RESPONSE_PACKET_HEADER:
hvsi_recv_response(hp, packet);
@@ -462,28 +460,26 @@
packet += len_packet(packet);
- if (*hangup || *handshake) {
- pr_debug("%s: hangup or handshake\n", __func__);
- /*
- * we need to send the hangup now before receiving any more data.
- * If we get "data, hangup, data", we can't deliver the second
- * data before the hangup.
- */
+ if (*handshake) {
+ pr_debug("%s: handshake\n", __func__);
break;
}
}
compact_inbuf(hp, packet);
+ if (flip)
+ tty_flip_buffer_push(tty);
+
return 1;
}
-static void hvsi_send_overflow(struct hvsi_struct *hp)
+static void hvsi_send_overflow(struct hvsi_struct *hp, struct tty_struct *tty)
{
pr_debug("%s: delivering %i bytes overflow\n", __func__,
hp->n_throttle);
- hvsi_insert_chars(hp, hp->throttle_buf, hp->n_throttle);
+ hvsi_insert_chars(hp, tty, hp->throttle_buf, hp->n_throttle);
hp->n_throttle = 0;
}
@@ -494,35 +490,20 @@
static irqreturn_t hvsi_interrupt(int irq, void *arg)
{
struct hvsi_struct *hp = (struct hvsi_struct *)arg;
- struct tty_struct *flip;
- struct tty_struct *hangup;
struct hvsi_struct *handshake;
+ struct tty_struct *tty;
unsigned long flags;
int again = 1;
pr_debug("%s\n", __func__);
+ tty = tty_port_tty_get(&hp->port);
+
while (again) {
spin_lock_irqsave(&hp->lock, flags);
- again = hvsi_load_chunk(hp, &flip, &hangup, &handshake);
+ again = hvsi_load_chunk(hp, tty, &handshake);
spin_unlock_irqrestore(&hp->lock, flags);
- /*
- * we have to call tty_flip_buffer_push() and tty_hangup() outside our
- * spinlock. But we also have to keep going until we've read all the
- * available data.
- */
-
- if (flip) {
- /* there was data put in the tty flip buffer */
- tty_flip_buffer_push(flip);
- flip = NULL;
- }
-
- if (hangup) {
- tty_hangup(hangup);
- }
-
if (handshake) {
pr_debug("hvsi%i: attempting re-handshake\n", handshake->index);
schedule_work(&handshake->handshaker);
@@ -530,18 +511,15 @@
}
spin_lock_irqsave(&hp->lock, flags);
- if (hp->tty && hp->n_throttle
- && (!test_bit(TTY_THROTTLED, &hp->tty->flags))) {
- /* we weren't hung up and we weren't throttled, so we can deliver the
- * rest now */
- flip = hp->tty;
- hvsi_send_overflow(hp);
+ if (tty && hp->n_throttle && !test_bit(TTY_THROTTLED, &tty->flags)) {
+ /* we weren't hung up and we weren't throttled, so we can
+ * deliver the rest now */
+ hvsi_send_overflow(hp, tty);
+ tty_flip_buffer_push(tty);
}
spin_unlock_irqrestore(&hp->lock, flags);
- if (flip) {
- tty_flip_buffer_push(flip);
- }
+ tty_kref_put(tty);
return IRQ_HANDLED;
}
@@ -749,9 +727,9 @@
if (hp->state == HVSI_FSP_DIED)
return -EIO;
+ tty_port_tty_set(&hp->port, tty);
spin_lock_irqsave(&hp->lock, flags);
- hp->tty = tty;
- hp->count++;
+ hp->port.count++;
atomic_set(&hp->seqno, 0);
h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE);
spin_unlock_irqrestore(&hp->lock, flags);
@@ -808,8 +786,8 @@
spin_lock_irqsave(&hp->lock, flags);
- if (--hp->count == 0) {
- hp->tty = NULL;
+ if (--hp->port.count == 0) {
+ tty_port_tty_set(&hp->port, NULL);
hp->inbuf_end = hp->inbuf; /* discard remaining partial packets */
/* only close down connection if it is not the console */
@@ -841,9 +819,9 @@
spin_lock_irqsave(&hp->lock, flags);
}
- } else if (hp->count < 0)
+ } else if (hp->port.count < 0)
printk(KERN_ERR "hvsi_close %lu: oops, count is %d\n",
- hp - hvsi_ports, hp->count);
+ hp - hvsi_ports, hp->port.count);
spin_unlock_irqrestore(&hp->lock, flags);
}
@@ -855,12 +833,11 @@
pr_debug("%s\n", __func__);
+ tty_port_tty_set(&hp->port, NULL);
+
spin_lock_irqsave(&hp->lock, flags);
-
- hp->count = 0;
+ hp->port.count = 0;
hp->n_outbuf = 0;
- hp->tty = NULL;
-
spin_unlock_irqrestore(&hp->lock, flags);
}
@@ -888,6 +865,7 @@
{
struct hvsi_struct *hp =
container_of(work, struct hvsi_struct, writer.work);
+ struct tty_struct *tty;
unsigned long flags;
#ifdef DEBUG
static long start_j = 0;
@@ -921,7 +899,11 @@
start_j = 0;
#endif /* DEBUG */
wake_up_all(&hp->emptyq);
- tty_wakeup(hp->tty);
+ tty = tty_port_tty_get(&hp->port);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
}
out:
@@ -966,8 +948,8 @@
* and hvsi_write_worker will be scheduled. subsequent hvsi_write() calls
* will see there is no room in outbuf and return.
*/
- while ((count > 0) && (hvsi_write_room(hp->tty) > 0)) {
- int chunksize = min(count, hvsi_write_room(hp->tty));
+ while ((count > 0) && (hvsi_write_room(tty) > 0)) {
+ int chunksize = min(count, hvsi_write_room(tty));
BUG_ON(hp->n_outbuf < 0);
memcpy(hp->outbuf + hp->n_outbuf, source, chunksize);
@@ -1014,19 +996,16 @@
{
struct hvsi_struct *hp = tty->driver_data;
unsigned long flags;
- int shouldflip = 0;
pr_debug("%s\n", __func__);
spin_lock_irqsave(&hp->lock, flags);
if (hp->n_throttle) {
- hvsi_send_overflow(hp);
- shouldflip = 1;
+ hvsi_send_overflow(hp, tty);
+ tty_flip_buffer_push(tty);
}
spin_unlock_irqrestore(&hp->lock, flags);
- if (shouldflip)
- tty_flip_buffer_push(hp->tty);
h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE);
}
@@ -1228,6 +1207,7 @@
init_waitqueue_head(&hp->emptyq);
init_waitqueue_head(&hp->stateq);
spin_lock_init(&hp->lock);
+ tty_port_init(&hp->port);
hp->index = hvsi_count;
hp->inbuf_end = hp->inbuf;
hp->state = HVSI_CLOSED;
diff --git a/drivers/tty/hvc/hvsi_lib.c b/drivers/tty/hvc/hvsi_lib.c
index 6f4dd83..59c135d 100644
--- a/drivers/tty/hvc/hvsi_lib.c
+++ b/drivers/tty/hvc/hvsi_lib.c
@@ -377,7 +377,7 @@
pr_devel("HVSI@%x: open !\n", pv->termno);
/* Keep track of the tty data structure */
- pv->tty = tty_kref_get(hp->tty);
+ pv->tty = tty_port_tty_get(&hp->port);
hvsilib_establish(pv);
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index 4daf962..f8b5fa0 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -44,14 +44,13 @@
#define TTYTYPE_RAS_RAW (2)
struct ipw_tty {
+ struct tty_port port;
int index;
struct ipw_hardware *hardware;
unsigned int channel_idx;
unsigned int secondary_channel_idx;
int tty_type;
struct ipw_network *network;
- struct tty_struct *linux_tty;
- int open_count;
unsigned int control_lines;
struct mutex ipw_tty_mutex;
int tx_bytes_queued;
@@ -73,23 +72,6 @@
return channel_names[tty_type];
}
-static void report_registering(struct ipw_tty *tty)
-{
- char *iftype = tty_type_name(tty->tty_type);
-
- printk(KERN_INFO IPWIRELESS_PCCARD_NAME
- ": registering %s device ttyIPWp%d\n", iftype, tty->index);
-}
-
-static void report_deregistering(struct ipw_tty *tty)
-{
- char *iftype = tty_type_name(tty->tty_type);
-
- printk(KERN_INFO IPWIRELESS_PCCARD_NAME
- ": deregistering %s device ttyIPWp%d\n", iftype,
- tty->index);
-}
-
static struct ipw_tty *get_tty(int index)
{
/*
@@ -117,12 +99,12 @@
mutex_unlock(&tty->ipw_tty_mutex);
return -ENODEV;
}
- if (tty->open_count == 0)
+ if (tty->port.count == 0)
tty->tx_bytes_queued = 0;
- tty->open_count++;
+ tty->port.count++;
- tty->linux_tty = linux_tty;
+ tty->port.tty = linux_tty;
linux_tty->driver_data = tty;
linux_tty->low_latency = 1;
@@ -136,13 +118,13 @@
static void do_ipw_close(struct ipw_tty *tty)
{
- tty->open_count--;
+ tty->port.count--;
- if (tty->open_count == 0) {
- struct tty_struct *linux_tty = tty->linux_tty;
+ if (tty->port.count == 0) {
+ struct tty_struct *linux_tty = tty->port.tty;
if (linux_tty != NULL) {
- tty->linux_tty = NULL;
+ tty->port.tty = NULL;
linux_tty->driver_data = NULL;
if (tty->tty_type == TTYTYPE_MODEM)
@@ -159,7 +141,7 @@
return;
mutex_lock(&tty->ipw_tty_mutex);
- if (tty->open_count == 0) {
+ if (tty->port.count == 0) {
mutex_unlock(&tty->ipw_tty_mutex);
return;
}
@@ -182,13 +164,13 @@
int work = 0;
mutex_lock(&tty->ipw_tty_mutex);
- linux_tty = tty->linux_tty;
+ linux_tty = tty->port.tty;
if (linux_tty == NULL) {
mutex_unlock(&tty->ipw_tty_mutex);
return;
}
- if (!tty->open_count) {
+ if (!tty->port.count) {
mutex_unlock(&tty->ipw_tty_mutex);
return;
}
@@ -230,7 +212,7 @@
return -ENODEV;
mutex_lock(&tty->ipw_tty_mutex);
- if (!tty->open_count) {
+ if (!tty->port.count) {
mutex_unlock(&tty->ipw_tty_mutex);
return -EINVAL;
}
@@ -270,7 +252,7 @@
if (!tty)
return -ENODEV;
- if (!tty->open_count)
+ if (!tty->port.count)
return -EINVAL;
room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued;
@@ -312,7 +294,7 @@
if (!tty)
return 0;
- if (!tty->open_count)
+ if (!tty->port.count)
return 0;
return tty->tx_bytes_queued;
@@ -393,7 +375,7 @@
if (!tty)
return -ENODEV;
- if (!tty->open_count)
+ if (!tty->port.count)
return -EINVAL;
return get_control_lines(tty);
@@ -409,7 +391,7 @@
if (!tty)
return -ENODEV;
- if (!tty->open_count)
+ if (!tty->port.count)
return -EINVAL;
return set_control_lines(tty, set, clear);
@@ -423,7 +405,7 @@
if (!tty)
return -ENODEV;
- if (!tty->open_count)
+ if (!tty->port.count)
return -EINVAL;
/* FIXME: Exactly how is the tty object locked here .. */
@@ -492,6 +474,7 @@
ttys[j]->network = network;
ttys[j]->tty_type = tty_type;
mutex_init(&ttys[j]->ipw_tty_mutex);
+ tty_port_init(&ttys[j]->port);
tty_register_device(ipw_tty_driver, j, NULL);
ipwireless_associate_network_tty(network, channel_idx, ttys[j]);
@@ -500,8 +483,12 @@
ipwireless_associate_network_tty(network,
secondary_channel_idx,
ttys[j]);
- if (get_tty(j) == ttys[j])
- report_registering(ttys[j]);
+ /* check if we provide raw device (if loopback is enabled) */
+ if (get_tty(j))
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": registering %s device ttyIPWp%d\n",
+ tty_type_name(tty_type), j);
+
return 0;
}
@@ -560,19 +547,21 @@
if (ttyj) {
mutex_lock(&ttyj->ipw_tty_mutex);
- if (get_tty(j) == ttyj)
- report_deregistering(ttyj);
+ if (get_tty(j))
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": deregistering %s device ttyIPWp%d\n",
+ tty_type_name(ttyj->tty_type), j);
ttyj->closing = 1;
- if (ttyj->linux_tty != NULL) {
+ if (ttyj->port.tty != NULL) {
mutex_unlock(&ttyj->ipw_tty_mutex);
- tty_hangup(ttyj->linux_tty);
- /* Wait till the tty_hangup has completed */
- flush_work_sync(&ttyj->linux_tty->hangup_work);
+ tty_vhangup(ttyj->port.tty);
/* FIXME: Exactly how is the tty object locked here
against a parallel ioctl etc */
+ /* FIXME2: hangup does not mean all processes
+ * are gone */
mutex_lock(&ttyj->ipw_tty_mutex);
}
- while (ttyj->open_count)
+ while (ttyj->port.count)
do_ipw_close(ttyj);
ipwireless_disassociate_network_ttys(network,
ttyj->channel_idx);
@@ -661,8 +650,8 @@
*/
if ((old_control_lines & IPW_CONTROL_LINE_DCD)
&& !(tty->control_lines & IPW_CONTROL_LINE_DCD)
- && tty->linux_tty) {
- tty_hangup(tty->linux_tty);
+ && tty->port.tty) {
+ tty_hangup(tty->port.tty);
}
}
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index c6f372d..90cc680 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -2326,7 +2326,7 @@
.get_icount = mxser_get_icount,
};
-struct tty_port_operations mxser_port_ops = {
+static struct tty_port_operations mxser_port_ops = {
.carrier_raised = mxser_carrier_raised,
.dtr_rts = mxser_dtr_rts,
.activate = mxser_activate,
diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c
index 5c6c314..656ad93 100644
--- a/drivers/tty/n_r3964.c
+++ b/drivers/tty/n_r3964.c
@@ -1065,7 +1065,8 @@
TRACE_L("read()");
- tty_lock();
+ /* FIXME: should use a private lock */
+ tty_lock(tty);
pClient = findClient(pInfo, task_pid(current));
if (pClient) {
@@ -1077,7 +1078,7 @@
goto unlock;
}
/* block until there is a message: */
- wait_event_interruptible_tty(pInfo->read_wait,
+ wait_event_interruptible_tty(tty, pInfo->read_wait,
(pMsg = remove_msg(pInfo, pClient)));
}
@@ -1107,7 +1108,7 @@
}
ret = -EPERM;
unlock:
- tty_unlock();
+ tty_unlock(tty);
return ret;
}
@@ -1156,7 +1157,7 @@
pHeader->locks = 0;
pHeader->owner = NULL;
- tty_lock();
+ tty_lock(tty);
pClient = findClient(pInfo, task_pid(current));
if (pClient) {
@@ -1175,7 +1176,7 @@
add_tx_queue(pInfo, pHeader);
trigger_transmit(pInfo);
- tty_unlock();
+ tty_unlock(tty);
return 0;
}
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 94b6eda..ee1c268 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1630,6 +1630,7 @@
int retval;
size_t n;
unsigned long flags;
+ bool is_eof;
retval = 0;
spin_lock_irqsave(&tty->read_lock, flags);
@@ -1639,15 +1640,15 @@
if (n) {
retval = copy_to_user(*b, &tty->read_buf[tty->read_tail], n);
n -= retval;
+ is_eof = n == 1 &&
+ tty->read_buf[tty->read_tail] == EOF_CHAR(tty);
tty_audit_add_data(tty, &tty->read_buf[tty->read_tail], n);
spin_lock_irqsave(&tty->read_lock, flags);
tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1);
tty->read_cnt -= n;
/* Turn single EOF into zero-length read */
- if (L_EXTPROC(tty) && tty->icanon && n == 1) {
- if (!tty->read_cnt && (*b)[n-1] == EOF_CHAR(tty))
- n--;
- }
+ if (L_EXTPROC(tty) && tty->icanon && is_eof && !tty->read_cnt)
+ n = 0;
spin_unlock_irqrestore(&tty->read_lock, flags);
*b += n;
*nr -= n;
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index eeae7fa..59af394 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -26,11 +26,13 @@
#include <linux/bitops.h>
#include <linux/devpts_fs.h>
#include <linux/slab.h>
+#include <linux/mutex.h>
#ifdef CONFIG_UNIX98_PTYS
static struct tty_driver *ptm_driver;
static struct tty_driver *pts_driver;
+static DEFINE_MUTEX(devpts_mutex);
#endif
static void pty_close(struct tty_struct *tty, struct file *filp)
@@ -45,6 +47,7 @@
wake_up_interruptible(&tty->read_wait);
wake_up_interruptible(&tty->write_wait);
tty->packet = 0;
+ /* Review - krefs on tty_link ?? */
if (!tty->link)
return;
tty->link->packet = 0;
@@ -54,12 +57,15 @@
if (tty->driver->subtype == PTY_TYPE_MASTER) {
set_bit(TTY_OTHER_CLOSED, &tty->flags);
#ifdef CONFIG_UNIX98_PTYS
- if (tty->driver == ptm_driver)
+ if (tty->driver == ptm_driver) {
+ mutex_lock(&devpts_mutex);
devpts_pty_kill(tty->link);
+ mutex_unlock(&devpts_mutex);
+ }
#endif
- tty_unlock();
+ tty_unlock(tty);
tty_vhangup(tty->link);
- tty_lock();
+ tty_lock(tty);
}
}
@@ -475,13 +481,17 @@
* @idx: tty index
*
* Look up a pty master device. Called under the tty_mutex for now.
- * This provides our locking.
+ * This provides our locking for the tty pointer.
*/
static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver,
struct inode *pts_inode, int idx)
{
- struct tty_struct *tty = devpts_get_tty(pts_inode, idx);
+ struct tty_struct *tty;
+
+ mutex_lock(&devpts_mutex);
+ tty = devpts_get_tty(pts_inode, idx);
+ mutex_unlock(&devpts_mutex);
/* Master must be open before slave */
if (!tty)
return ERR_PTR(-EIO);
@@ -613,24 +623,29 @@
return retval;
/* find a device that is not in use. */
- tty_lock();
+ mutex_lock(&devpts_mutex);
index = devpts_new_index(inode);
- tty_unlock();
if (index < 0) {
retval = index;
goto err_file;
}
+ mutex_unlock(&devpts_mutex);
+
mutex_lock(&tty_mutex);
- tty_lock();
+ mutex_lock(&devpts_mutex);
tty = tty_init_dev(ptm_driver, index);
- mutex_unlock(&tty_mutex);
if (IS_ERR(tty)) {
retval = PTR_ERR(tty);
goto out;
}
+ /* The tty returned here is locked so we can safely
+ drop the mutex */
+ mutex_unlock(&devpts_mutex);
+ mutex_unlock(&tty_mutex);
+
set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
tty_add_file(tty, filp);
@@ -643,16 +658,17 @@
if (retval)
goto err_release;
- tty_unlock();
+ tty_unlock(tty);
return 0;
err_release:
- tty_unlock();
+ tty_unlock(tty);
tty_release(inode, filp);
return retval;
out:
+ mutex_unlock(&tty_mutex);
devpts_kill_index(inode, index);
- tty_unlock();
err_file:
+ mutex_unlock(&devpts_mutex);
tty_free_file(filp);
return retval;
}
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index 5ce78252..3ed20e4 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -17,6 +17,7 @@
#include <asm/dbg.h>
#include <linux/module.h>
#include <linux/errno.h>
+#include <linux/serial.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/timer.h>
@@ -56,8 +57,6 @@
#endif /* CONFIG_M68VZ328 */
#endif /* CONFIG_M68EZ328 */
-#include "68328serial.h"
-
/* Turn off usage of real serial interrupt code, to "support" Copilot */
#ifdef CONFIG_XCOPILOT_BUGS
#undef USE_INTS
@@ -65,33 +64,82 @@
#define USE_INTS
#endif
+/*
+ * I believe this is the optimal setting that reduces the number of interrupts.
+ * At high speeds the output might become a little "bursted" (use USTCNT_TXHE
+ * if that bothers you), but in most cases it will not, since we try to
+ * transmit characters every time rs_interrupt is called. Thus, quite often
+ * you'll see that a receive interrupt occures before the transmit one.
+ * -- Vladimir Gurevich
+ */
+#define USTCNT_TX_INTR_MASK (USTCNT_TXEE)
+
+/*
+ * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special
+ * "Old data interrupt" which occures whenever the data stay in the FIFO
+ * longer than 30 bits time. This allows us to use FIFO without compromising
+ * latency. '328 does not have this feature and without the real 328-based
+ * board I would assume that RXRE is the safest setting.
+ *
+ * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of
+ * interrupts. RXFE (receive queue full) causes the system to lose data
+ * at least at 115200 baud
+ *
+ * If your board is busy doing other stuff, you might consider to use
+ * RXRE (data ready intrrupt) instead.
+ *
+ * The other option is to make these INTR masks run-time configurable, so
+ * that people can dynamically adapt them according to the current usage.
+ * -- Vladimir Gurevich
+ */
+
+/* (es) */
+#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328)
+#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN)
+#elif defined(CONFIG_M68328)
+#define USTCNT_RX_INTR_MASK (USTCNT_RXRE)
+#else
+#error Please, define the Rx interrupt events for your CPU
+#endif
+/* (/es) */
+
+/*
+ * This is our internal structure for each serial port's state.
+ */
+struct m68k_serial {
+ struct tty_port tport;
+ char is_cons; /* Is this our console. */
+ int magic;
+ int baud_base;
+ int port;
+ int irq;
+ int type; /* UART type */
+ int custom_divisor;
+ int x_char; /* xon/xoff character */
+ int line;
+ unsigned char *xmit_buf;
+ int xmit_head;
+ int xmit_tail;
+ int xmit_cnt;
+};
+
+#define SERIAL_MAGIC 0x5301
+
+/*
+ * Define the number of ports supported and their irqs.
+ */
+#define NR_PORTS 1
+
static struct m68k_serial m68k_soft[NR_PORTS];
-static unsigned int uart_irqs[NR_PORTS] = UART_IRQ_DEFNS;
+static unsigned int uart_irqs[NR_PORTS] = { UART_IRQ_NUM };
/* multiple ports are contiguous in memory */
m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR;
-struct tty_struct m68k_ttys;
-struct m68k_serial *m68k_consinfo = 0;
-
-#define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */
-
struct tty_driver *serial_driver;
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-
-/* Debugging... DEBUG_INTR is bad to use when one of the zs
- * lines is your console ;(
- */
-#undef SERIAL_DEBUG_INTR
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_FLOW
-
-#define RS_ISR_PASS_LIMIT 256
-
-static void change_speed(struct m68k_serial *info);
+static void change_speed(struct m68k_serial *info, struct tty_struct *tty);
/*
* Setup for console. Argument comes from the boot command line.
@@ -143,17 +191,6 @@
0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
9600, 19200, 38400, 57600, 115200, 0 };
-/* Sets or clears DTR/RTS on the requested line */
-static inline void m68k_rtsdtr(struct m68k_serial *ss, int set)
-{
- if (set) {
- /* set the RTS/CTS line */
- } else {
- /* clear it */
- }
- return;
-}
-
/* Utility routines */
static inline int get_baud(struct m68k_serial *ss)
{
@@ -189,7 +226,8 @@
static int rs_put_char(char ch)
{
- int flags, loops = 0;
+ unsigned long flags;
+ int loops = 0;
local_irq_save(flags);
@@ -224,28 +262,9 @@
local_irq_restore(flags);
}
-/* Drop into either the boot monitor or kadb upon receiving a break
- * from keyboard/console input.
- */
-static void batten_down_hatches(void)
+static void receive_chars(struct m68k_serial *info, struct tty_struct *tty,
+ unsigned short rx)
{
- /* Drop into the debugger */
-}
-
-static void status_handle(struct m68k_serial *info, unsigned short status)
-{
- /* If this is console input and this is a
- * 'break asserted' status change interrupt
- * see if we can drop into the debugger
- */
- if((status & URX_BREAK) && info->break_abort)
- batten_down_hatches();
- return;
-}
-
-static void receive_chars(struct m68k_serial *info, unsigned short rx)
-{
- struct tty_struct *tty = info->tty;
m68328_uart *uart = &uart_addr[info->line];
unsigned char ch, flag;
@@ -259,7 +278,6 @@
if(info->is_cons) {
if(URX_BREAK & rx) { /* whee, break received */
- status_handle(info, rx);
return;
#ifdef CONFIG_MAGIC_SYSRQ
} else if (ch == 0x10) { /* ^P */
@@ -280,16 +298,13 @@
flag = TTY_NORMAL;
- if(rx & URX_PARITY_ERROR) {
+ if (rx & URX_PARITY_ERROR)
flag = TTY_PARITY;
- status_handle(info, rx);
- } else if(rx & URX_OVRUN) {
+ else if (rx & URX_OVRUN)
flag = TTY_OVERRUN;
- status_handle(info, rx);
- } else if(rx & URX_FRAME_ERROR) {
+ else if (rx & URX_FRAME_ERROR)
flag = TTY_FRAME;
- status_handle(info, rx);
- }
+
tty_insert_flip_char(tty, ch, flag);
#ifndef CONFIG_XCOPILOT_BUGS
} while((rx = uart->urx.w) & URX_DATA_READY);
@@ -301,7 +316,7 @@
return;
}
-static void transmit_chars(struct m68k_serial *info)
+static void transmit_chars(struct m68k_serial *info, struct tty_struct *tty)
{
m68328_uart *uart = &uart_addr[info->line];
@@ -312,7 +327,7 @@
goto clear_and_return;
}
- if((info->xmit_cnt <= 0) || info->tty->stopped) {
+ if ((info->xmit_cnt <= 0) || !tty || tty->stopped) {
/* That's peculiar... TX ints off */
uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
goto clear_and_return;
@@ -340,6 +355,7 @@
irqreturn_t rs_interrupt(int irq, void *dev_id)
{
struct m68k_serial *info = dev_id;
+ struct tty_struct *tty = tty_port_tty_get(&info->tport);
m68328_uart *uart;
unsigned short rx;
unsigned short tx;
@@ -350,20 +366,24 @@
#ifdef USE_INTS
tx = uart->utx.w;
- if (rx & URX_DATA_READY) receive_chars(info, rx);
- if (tx & UTX_TX_AVAIL) transmit_chars(info);
+ if (rx & URX_DATA_READY)
+ receive_chars(info, tty, rx);
+ if (tx & UTX_TX_AVAIL)
+ transmit_chars(info, tty);
#else
- receive_chars(info, rx);
+ receive_chars(info, tty, rx);
#endif
+ tty_kref_put(tty);
+
return IRQ_HANDLED;
}
-static int startup(struct m68k_serial * info)
+static int startup(struct m68k_serial *info, struct tty_struct *tty)
{
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
- if (info->flags & S_INITIALIZED)
+ if (info->tport.flags & ASYNC_INITIALIZED)
return 0;
if (!info->xmit_buf) {
@@ -380,7 +400,6 @@
*/
uart->ustcnt = USTCNT_UEN;
- info->xmit_fifo_size = 1;
uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN;
(void)uart->urx.w;
@@ -394,17 +413,17 @@
uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
#endif
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (tty)
+ clear_bit(TTY_IO_ERROR, &tty->flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
/*
* and set the speed of the serial port
*/
- change_speed(info);
+ change_speed(info, tty);
- info->flags |= S_INITIALIZED;
+ info->tport.flags |= ASYNC_INITIALIZED;
local_irq_restore(flags);
return 0;
}
@@ -413,13 +432,13 @@
* This routine will shutdown a serial port; interrupts are disabled, and
* DTR is dropped if the hangup on close termio flag is on.
*/
-static void shutdown(struct m68k_serial * info)
+static void shutdown(struct m68k_serial *info, struct tty_struct *tty)
{
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
uart->ustcnt = 0; /* All off! */
- if (!(info->flags & S_INITIALIZED))
+ if (!(info->tport.flags & ASYNC_INITIALIZED))
return;
local_irq_save(flags);
@@ -429,10 +448,10 @@
info->xmit_buf = 0;
}
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (tty)
+ set_bit(TTY_IO_ERROR, &tty->flags);
- info->flags &= ~S_INITIALIZED;
+ info->tport.flags &= ~ASYNC_INITIALIZED;
local_irq_restore(flags);
}
@@ -488,7 +507,7 @@
* This routine is called to set the UART divisor registers to match
* the specified baud rate for a serial port.
*/
-static void change_speed(struct m68k_serial *info)
+static void change_speed(struct m68k_serial *info, struct tty_struct *tty)
{
m68328_uart *uart = &uart_addr[info->line];
unsigned short port;
@@ -496,9 +515,7 @@
unsigned cflag;
int i;
- if (!info->tty || !info->tty->termios)
- return;
- cflag = info->tty->termios->c_cflag;
+ cflag = tty->termios->c_cflag;
if (!(port = info->port))
return;
@@ -510,7 +527,6 @@
i = (i & ~CBAUDEX) + B38400;
}
- info->baud = baud_table[i];
uart->ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) |
PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);
@@ -807,10 +823,10 @@
tmp.line = info->line;
tmp.port = info->port;
tmp.irq = info->irq;
- tmp.flags = info->flags;
+ tmp.flags = info->tport.flags;
tmp.baud_base = info->baud_base;
- tmp.close_delay = info->close_delay;
- tmp.closing_wait = info->closing_wait;
+ tmp.close_delay = info->tport.close_delay;
+ tmp.closing_wait = info->tport.closing_wait;
tmp.custom_divisor = info->custom_divisor;
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
return -EFAULT;
@@ -818,9 +834,10 @@
return 0;
}
-static int set_serial_info(struct m68k_serial * info,
+static int set_serial_info(struct m68k_serial *info, struct tty_struct *tty,
struct serial_struct * new_info)
{
+ struct tty_port *port = &info->tport;
struct serial_struct new_serial;
struct m68k_serial old_info;
int retval = 0;
@@ -834,17 +851,17 @@
if (!capable(CAP_SYS_ADMIN)) {
if ((new_serial.baud_base != info->baud_base) ||
(new_serial.type != info->type) ||
- (new_serial.close_delay != info->close_delay) ||
- ((new_serial.flags & ~S_USR_MASK) !=
- (info->flags & ~S_USR_MASK)))
+ (new_serial.close_delay != port->close_delay) ||
+ ((new_serial.flags & ~ASYNC_USR_MASK) !=
+ (port->flags & ~ASYNC_USR_MASK)))
return -EPERM;
- info->flags = ((info->flags & ~S_USR_MASK) |
- (new_serial.flags & S_USR_MASK));
+ port->flags = ((port->flags & ~ASYNC_USR_MASK) |
+ (new_serial.flags & ASYNC_USR_MASK));
info->custom_divisor = new_serial.custom_divisor;
goto check_and_exit;
}
- if (info->count > 1)
+ if (port->count > 1)
return -EBUSY;
/*
@@ -853,14 +870,14 @@
*/
info->baud_base = new_serial.baud_base;
- info->flags = ((info->flags & ~S_FLAGS) |
- (new_serial.flags & S_FLAGS));
+ port->flags = ((port->flags & ~ASYNC_FLAGS) |
+ (new_serial.flags & ASYNC_FLAGS));
info->type = new_serial.type;
- info->close_delay = new_serial.close_delay;
- info->closing_wait = new_serial.closing_wait;
+ port->close_delay = new_serial.close_delay;
+ port->closing_wait = new_serial.closing_wait;
check_and_exit:
- retval = startup(info);
+ retval = startup(info, tty);
return retval;
}
@@ -946,7 +963,7 @@
return get_serial_info(info,
(struct serial_struct *) arg);
case TIOCSSERIAL:
- return set_serial_info(info,
+ return set_serial_info(info, tty,
(struct serial_struct *) arg);
case TIOCSERGETLSR: /* Get line status register */
return get_lsr_info(info, (unsigned int *) arg);
@@ -965,7 +982,7 @@
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- change_speed(info);
+ change_speed(info, tty);
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
@@ -988,6 +1005,7 @@
static void rs_close(struct tty_struct *tty, struct file * filp)
{
struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
+ struct tty_port *port = &info->tport;
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
@@ -1001,7 +1019,7 @@
return;
}
- if ((tty->count == 1) && (info->count != 1)) {
+ if ((tty->count == 1) && (port->count != 1)) {
/*
* Uh, oh. tty->count is 1, which means that the tty
* structure will be freed. Info->count should always
@@ -1010,26 +1028,26 @@
* serial port won't be shutdown.
*/
printk("rs_close: bad serial port count; tty->count is 1, "
- "info->count is %d\n", info->count);
- info->count = 1;
+ "port->count is %d\n", port->count);
+ port->count = 1;
}
- if (--info->count < 0) {
+ if (--port->count < 0) {
printk("rs_close: bad serial port count for ttyS%d: %d\n",
- info->line, info->count);
- info->count = 0;
+ info->line, port->count);
+ port->count = 0;
}
- if (info->count) {
+ if (port->count) {
local_irq_restore(flags);
return;
}
- info->flags |= S_CLOSING;
+ port->flags |= ASYNC_CLOSING;
/*
* Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
*/
tty->closing = 1;
- if (info->closing_wait != S_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, info->closing_wait);
+ if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, port->closing_wait);
/*
* At this point we stop accepting input. To do this, we
* disable the receive line status interrupts, and tell the
@@ -1040,13 +1058,12 @@
uart->ustcnt &= ~USTCNT_RXEN;
uart->ustcnt &= ~(USTCNT_RXEN | USTCNT_RX_INTR_MASK);
- shutdown(info);
+ shutdown(info, tty);
rs_flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
- info->event = 0;
- info->tty = NULL;
+ tty_port_tty_set(&info->tport, NULL);
#warning "This is not and has never been valid so fix it"
#if 0
if (tty->ldisc.num != ldiscs[N_TTY].num) {
@@ -1058,14 +1075,13 @@
(tty->ldisc.open)(tty);
}
#endif
- if (info->blocked_open) {
- if (info->close_delay) {
- msleep_interruptible(jiffies_to_msecs(info->close_delay));
- }
- wake_up_interruptible(&info->open_wait);
+ if (port->blocked_open) {
+ if (port->close_delay)
+ msleep_interruptible(jiffies_to_msecs(port->close_delay));
+ wake_up_interruptible(&port->open_wait);
}
- info->flags &= ~(S_NORMAL_ACTIVE|S_CLOSING);
- wake_up_interruptible(&info->close_wait);
+ port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ wake_up_interruptible(&port->close_wait);
local_irq_restore(flags);
}
@@ -1080,107 +1096,14 @@
return;
rs_flush_buffer(tty);
- shutdown(info);
- info->event = 0;
- info->count = 0;
- info->flags &= ~S_NORMAL_ACTIVE;
- info->tty = NULL;
- wake_up_interruptible(&info->open_wait);
+ shutdown(info, tty);
+ info->tport.count = 0;
+ info->tport.flags &= ~ASYNC_NORMAL_ACTIVE;
+ tty_port_tty_set(&info->tport, NULL);
+ wake_up_interruptible(&info->tport.open_wait);
}
/*
- * ------------------------------------------------------------
- * rs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
- struct m68k_serial *info)
-{
- DECLARE_WAITQUEUE(wait, current);
- int retval;
- int do_clocal = 0;
-
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (info->flags & S_CLOSING) {
- interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
- if (info->flags & S_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
-#else
- return -EAGAIN;
-#endif
- }
-
- /*
- * If non-blocking mode is set, or the port is not enabled,
- * then make the check up front and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- info->flags |= S_NORMAL_ACTIVE;
- return 0;
- }
-
- if (tty->termios->c_cflag & CLOCAL)
- do_clocal = 1;
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
- * rs_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&info->open_wait, &wait);
-
- info->count--;
- info->blocked_open++;
- while (1) {
- local_irq_disable();
- m68k_rtsdtr(info, 1);
- local_irq_enable();
- current->state = TASK_INTERRUPTIBLE;
- if (tty_hung_up_p(filp) ||
- !(info->flags & S_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
- if (info->flags & S_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
-#else
- retval = -EAGAIN;
-#endif
- break;
- }
- if (!(info->flags & S_CLOSING) && do_clocal)
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
- tty_unlock();
- schedule();
- tty_lock();
- }
- current->state = TASK_RUNNING;
- remove_wait_queue(&info->open_wait, &wait);
- if (!tty_hung_up_p(filp))
- info->count++;
- info->blocked_open--;
-
- if (retval)
- return retval;
- info->flags |= S_NORMAL_ACTIVE;
- return 0;
-}
-
-/*
* This routine is called whenever a serial port is opened. It
* enables interrupts for a serial port, linking in its S structure into
* the IRQ chain. It also performs the serial-specific
@@ -1196,18 +1119,18 @@
if (serial_paranoia_check(info, tty->name, "rs_open"))
return -ENODEV;
- info->count++;
+ info->tport.count++;
tty->driver_data = info;
- info->tty = tty;
+ tty_port_tty_set(&info->tport, tty);
/*
* Start up serial port
*/
- retval = startup(info);
+ retval = startup(info, tty);
if (retval)
return retval;
- return block_til_ready(tty, filp, info);
+ return tty_port_block_til_ready(&info->tport, tty, filp);
}
/* Finally, routines used to initialize the serial driver. */
@@ -1235,11 +1158,15 @@
.set_ldisc = rs_set_ldisc,
};
+static const struct tty_port_operations rs_port_ops = {
+};
+
/* rs_init inits the driver */
static int __init
rs68328_init(void)
{
- int flags, i;
+ unsigned long flags;
+ int i;
struct m68k_serial *info;
serial_driver = alloc_tty_driver(NR_PORTS);
@@ -1273,19 +1200,13 @@
for(i=0;i<NR_PORTS;i++) {
info = &m68k_soft[i];
+ tty_port_init(&info->tport);
+ info->tport.ops = &rs_port_ops;
info->magic = SERIAL_MAGIC;
info->port = (int) &uart_addr[i];
- info->tty = NULL;
info->irq = uart_irqs[i];
info->custom_divisor = 16;
- info->close_delay = 50;
- info->closing_wait = 3000;
info->x_char = 0;
- info->event = 0;
- info->count = 0;
- info->blocked_open = 0;
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
info->line = i;
info->is_cons = 1; /* Means shortcuts work */
diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h
deleted file mode 100644
index 3d2faab..0000000
--- a/drivers/tty/serial/68328serial.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/* 68328serial.h: Definitions for the mc68328 serial driver.
- *
- * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu>
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
- * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org>
- * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
- *
- * VZ Support/Fixes Evan Stawnyczy <e@lineo.ca>
- */
-
-#ifndef _MC683XX_SERIAL_H
-#define _MC683XX_SERIAL_H
-
-
-struct serial_struct {
- int type;
- int line;
- int port;
- int irq;
- int flags;
- int xmit_fifo_size;
- int custom_divisor;
- int baud_base;
- unsigned short close_delay;
- char reserved_char[2];
- int hub6; /* FIXME: We don't have AT&T Hub6 boards! */
- unsigned short closing_wait; /* time to wait before closing */
- unsigned short closing_wait2; /* no longer used... */
- int reserved[4];
-};
-
-/*
- * For the close wait times, 0 means wait forever for serial port to
- * flush its output. 65535 means don't wait at all.
- */
-#define S_CLOSING_WAIT_INF 0
-#define S_CLOSING_WAIT_NONE 65535
-
-/*
- * Definitions for S_struct (and serial_struct) flags field
- */
-#define S_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes
- on the callout port */
-#define S_FOURPORT 0x0002 /* Set OU1, OUT2 per AST Fourport settings */
-#define S_SAK 0x0004 /* Secure Attention Key (Orange book) */
-#define S_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
-
-#define S_SPD_MASK 0x0030
-#define S_SPD_HI 0x0010 /* Use 56000 instead of 38400 bps */
-
-#define S_SPD_VHI 0x0020 /* Use 115200 instead of 38400 bps */
-#define S_SPD_CUST 0x0030 /* Use user-specified divisor */
-
-#define S_SKIP_TEST 0x0040 /* Skip UART test during autoconfiguration */
-#define S_AUTO_IRQ 0x0080 /* Do automatic IRQ during autoconfiguration */
-#define S_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
-#define S_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */
-#define S_CALLOUT_NOHUP 0x0400 /* Don't do hangups for cua device */
-
-#define S_FLAGS 0x0FFF /* Possible legal S flags */
-#define S_USR_MASK 0x0430 /* Legal flags that non-privileged
- * users can set or reset */
-
-/* Internal flags used only by kernel/chr_drv/serial.c */
-#define S_INITIALIZED 0x80000000 /* Serial port was initialized */
-#define S_CALLOUT_ACTIVE 0x40000000 /* Call out device is active */
-#define S_NORMAL_ACTIVE 0x20000000 /* Normal device is active */
-#define S_BOOT_AUTOCONF 0x10000000 /* Autoconfigure port on bootup */
-#define S_CLOSING 0x08000000 /* Serial port is closing */
-#define S_CTS_FLOW 0x04000000 /* Do CTS flow control */
-#define S_CHECK_CD 0x02000000 /* i.e., CLOCAL */
-
-/* Software state per channel */
-
-#ifdef __KERNEL__
-
-/*
- * I believe this is the optimal setting that reduces the number of interrupts.
- * At high speeds the output might become a little "bursted" (use USTCNT_TXHE
- * if that bothers you), but in most cases it will not, since we try to
- * transmit characters every time rs_interrupt is called. Thus, quite often
- * you'll see that a receive interrupt occures before the transmit one.
- * -- Vladimir Gurevich
- */
-#define USTCNT_TX_INTR_MASK (USTCNT_TXEE)
-
-/*
- * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special
- * "Old data interrupt" which occures whenever the data stay in the FIFO
- * longer than 30 bits time. This allows us to use FIFO without compromising
- * latency. '328 does not have this feature and without the real 328-based
- * board I would assume that RXRE is the safest setting.
- *
- * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of
- * interrupts. RXFE (receive queue full) causes the system to lose data
- * at least at 115200 baud
- *
- * If your board is busy doing other stuff, you might consider to use
- * RXRE (data ready intrrupt) instead.
- *
- * The other option is to make these INTR masks run-time configurable, so
- * that people can dynamically adapt them according to the current usage.
- * -- Vladimir Gurevich
- */
-
-/* (es) */
-#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328)
-#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN)
-#elif defined(CONFIG_M68328)
-#define USTCNT_RX_INTR_MASK (USTCNT_RXRE)
-#else
-#error Please, define the Rx interrupt events for your CPU
-#endif
-/* (/es) */
-
-/*
- * This is our internal structure for each serial port's state.
- *
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-struct m68k_serial {
- char soft_carrier; /* Use soft carrier on this channel */
- char break_abort; /* Is serial console in, so process brk/abrt */
- char is_cons; /* Is this our console. */
-
- /* We need to know the current clock divisor
- * to read the bps rate the chip has currently
- * loaded.
- */
- unsigned char clk_divisor; /* May be 1, 16, 32, or 64 */
- int baud;
- int magic;
- int baud_base;
- int port;
- int irq;
- int flags; /* defined in tty.h */
- int type; /* UART type */
- struct tty_struct *tty;
- int read_status_mask;
- int ignore_status_mask;
- int timeout;
- int xmit_fifo_size;
- int custom_divisor;
- int x_char; /* xon/xoff character */
- int close_delay;
- unsigned short closing_wait;
- unsigned short closing_wait2;
- unsigned long event;
- unsigned long last_active;
- int line;
- int count; /* # of fd on device */
- int blocked_open; /* # of blocked opens */
- unsigned char *xmit_buf;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
-};
-
-
-#define SERIAL_MAGIC 0x5301
-
-/*
- * The size of the serial xmit buffer is 1 page, or 4096 bytes
- */
-#define SERIAL_XMIT_SIZE 4096
-
-/*
- * Events are used to schedule things to happen at timer-interrupt
- * time, instead of at rs interrupt time.
- */
-#define RS_EVENT_WRITE_WAKEUP 0
-
-/*
- * Define the number of ports supported and their irqs.
- */
-#define NR_PORTS 1
-#define UART_IRQ_DEFNS {UART_IRQ_NUM}
-
-#endif /* __KERNEL__ */
-#endif /* !(_MC683XX_SERIAL_H) */
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 5c27f7e..47d061b 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -284,7 +284,20 @@
},
};
-#if defined(CONFIG_MIPS_ALCHEMY)
+/* Uart divisor latch read */
+static int default_serial_dl_read(struct uart_8250_port *up)
+{
+ return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8;
+}
+
+/* Uart divisor latch write */
+static void default_serial_dl_write(struct uart_8250_port *up, int value)
+{
+ serial_out(up, UART_DLL, value & 0xff);
+ serial_out(up, UART_DLM, value >> 8 & 0xff);
+}
+
+#ifdef CONFIG_MIPS_ALCHEMY
/* Au1x00 UART hardware has a weird register layout */
static const u8 au_io_in_map[] = {
@@ -305,22 +318,32 @@
[UART_MCR] = 6,
};
-/* sane hardware needs no mapping */
-static inline int map_8250_in_reg(struct uart_port *p, int offset)
+static unsigned int au_serial_in(struct uart_port *p, int offset)
{
- if (p->iotype != UPIO_AU)
- return offset;
- return au_io_in_map[offset];
+ offset = au_io_in_map[offset] << p->regshift;
+ return __raw_readl(p->membase + offset);
}
-static inline int map_8250_out_reg(struct uart_port *p, int offset)
+static void au_serial_out(struct uart_port *p, int offset, int value)
{
- if (p->iotype != UPIO_AU)
- return offset;
- return au_io_out_map[offset];
+ offset = au_io_out_map[offset] << p->regshift;
+ __raw_writel(value, p->membase + offset);
}
-#elif defined(CONFIG_SERIAL_8250_RM9K)
+/* Au1x00 haven't got a standard divisor latch */
+static int au_serial_dl_read(struct uart_8250_port *up)
+{
+ return __raw_readl(up->port.membase + 0x28);
+}
+
+static void au_serial_dl_write(struct uart_8250_port *up, int value)
+{
+ __raw_writel(value, up->port.membase + 0x28);
+}
+
+#endif
+
+#ifdef CONFIG_SERIAL_8250_RM9K
static const u8
regmap_in[8] = {
@@ -344,87 +367,79 @@
[UART_SCR] = 0x2c
};
-static inline int map_8250_in_reg(struct uart_port *p, int offset)
+static unsigned int rm9k_serial_in(struct uart_port *p, int offset)
{
- if (p->iotype != UPIO_RM9000)
- return offset;
- return regmap_in[offset];
+ offset = regmap_in[offset] << p->regshift;
+ return readl(p->membase + offset);
}
-static inline int map_8250_out_reg(struct uart_port *p, int offset)
+static void rm9k_serial_out(struct uart_port *p, int offset, int value)
{
- if (p->iotype != UPIO_RM9000)
- return offset;
- return regmap_out[offset];
+ offset = regmap_out[offset] << p->regshift;
+ writel(value, p->membase + offset);
}
-#else
+static int rm9k_serial_dl_read(struct uart_8250_port *up)
+{
+ return ((__raw_readl(up->port.membase + 0x10) << 8) |
+ (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff;
+}
-/* sane hardware needs no mapping */
-#define map_8250_in_reg(up, offset) (offset)
-#define map_8250_out_reg(up, offset) (offset)
+static void rm9k_serial_dl_write(struct uart_8250_port *up, int value)
+{
+ __raw_writel(value, up->port.membase + 0x08);
+ __raw_writel(value >> 8, up->port.membase + 0x10);
+}
#endif
static unsigned int hub6_serial_in(struct uart_port *p, int offset)
{
- offset = map_8250_in_reg(p, offset) << p->regshift;
+ offset = offset << p->regshift;
outb(p->hub6 - 1 + offset, p->iobase);
return inb(p->iobase + 1);
}
static void hub6_serial_out(struct uart_port *p, int offset, int value)
{
- offset = map_8250_out_reg(p, offset) << p->regshift;
+ offset = offset << p->regshift;
outb(p->hub6 - 1 + offset, p->iobase);
outb(value, p->iobase + 1);
}
static unsigned int mem_serial_in(struct uart_port *p, int offset)
{
- offset = map_8250_in_reg(p, offset) << p->regshift;
+ offset = offset << p->regshift;
return readb(p->membase + offset);
}
static void mem_serial_out(struct uart_port *p, int offset, int value)
{
- offset = map_8250_out_reg(p, offset) << p->regshift;
+ offset = offset << p->regshift;
writeb(value, p->membase + offset);
}
static void mem32_serial_out(struct uart_port *p, int offset, int value)
{
- offset = map_8250_out_reg(p, offset) << p->regshift;
+ offset = offset << p->regshift;
writel(value, p->membase + offset);
}
static unsigned int mem32_serial_in(struct uart_port *p, int offset)
{
- offset = map_8250_in_reg(p, offset) << p->regshift;
+ offset = offset << p->regshift;
return readl(p->membase + offset);
}
-static unsigned int au_serial_in(struct uart_port *p, int offset)
-{
- offset = map_8250_in_reg(p, offset) << p->regshift;
- return __raw_readl(p->membase + offset);
-}
-
-static void au_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = map_8250_out_reg(p, offset) << p->regshift;
- __raw_writel(value, p->membase + offset);
-}
-
static unsigned int io_serial_in(struct uart_port *p, int offset)
{
- offset = map_8250_in_reg(p, offset) << p->regshift;
+ offset = offset << p->regshift;
return inb(p->iobase + offset);
}
static void io_serial_out(struct uart_port *p, int offset, int value)
{
- offset = map_8250_out_reg(p, offset) << p->regshift;
+ offset = offset << p->regshift;
outb(value, p->iobase + offset);
}
@@ -434,6 +449,10 @@
{
struct uart_8250_port *up =
container_of(p, struct uart_8250_port, port);
+
+ up->dl_read = default_serial_dl_read;
+ up->dl_write = default_serial_dl_write;
+
switch (p->iotype) {
case UPIO_HUB6:
p->serial_in = hub6_serial_in;
@@ -445,16 +464,28 @@
p->serial_out = mem_serial_out;
break;
- case UPIO_RM9000:
case UPIO_MEM32:
p->serial_in = mem32_serial_in;
p->serial_out = mem32_serial_out;
break;
+#ifdef CONFIG_SERIAL_8250_RM9K
+ case UPIO_RM9000:
+ p->serial_in = rm9k_serial_in;
+ p->serial_out = rm9k_serial_out;
+ up->dl_read = rm9k_serial_dl_read;
+ up->dl_write = rm9k_serial_dl_write;
+ break;
+#endif
+
+#ifdef CONFIG_MIPS_ALCHEMY
case UPIO_AU:
p->serial_in = au_serial_in;
p->serial_out = au_serial_out;
+ up->dl_read = au_serial_dl_read;
+ up->dl_write = au_serial_dl_write;
break;
+#endif
default:
p->serial_in = io_serial_in;
@@ -481,59 +512,6 @@
}
}
-/* Uart divisor latch read */
-static inline int _serial_dl_read(struct uart_8250_port *up)
-{
- return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8;
-}
-
-/* Uart divisor latch write */
-static inline void _serial_dl_write(struct uart_8250_port *up, int value)
-{
- serial_out(up, UART_DLL, value & 0xff);
- serial_out(up, UART_DLM, value >> 8 & 0xff);
-}
-
-#if defined(CONFIG_MIPS_ALCHEMY)
-/* Au1x00 haven't got a standard divisor latch */
-static int serial_dl_read(struct uart_8250_port *up)
-{
- if (up->port.iotype == UPIO_AU)
- return __raw_readl(up->port.membase + 0x28);
- else
- return _serial_dl_read(up);
-}
-
-static void serial_dl_write(struct uart_8250_port *up, int value)
-{
- if (up->port.iotype == UPIO_AU)
- __raw_writel(value, up->port.membase + 0x28);
- else
- _serial_dl_write(up, value);
-}
-#elif defined(CONFIG_SERIAL_8250_RM9K)
-static int serial_dl_read(struct uart_8250_port *up)
-{
- return (up->port.iotype == UPIO_RM9000) ?
- (((__raw_readl(up->port.membase + 0x10) << 8) |
- (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff) :
- _serial_dl_read(up);
-}
-
-static void serial_dl_write(struct uart_8250_port *up, int value)
-{
- if (up->port.iotype == UPIO_RM9000) {
- __raw_writel(value, up->port.membase + 0x08);
- __raw_writel(value >> 8, up->port.membase + 0x10);
- } else {
- _serial_dl_write(up, value);
- }
-}
-#else
-#define serial_dl_read(up) _serial_dl_read(up)
-#define serial_dl_write(up, value) _serial_dl_write(up, value)
-#endif
-
/*
* For the 16C950
*/
@@ -568,6 +546,16 @@
}
}
+void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p)
+{
+ unsigned char fcr;
+
+ serial8250_clear_fifos(p);
+ fcr = uart_config[p->port.type].fcr;
+ serial_out(p, UART_FCR, fcr);
+}
+EXPORT_SYMBOL_GPL(serial8250_clear_and_reinit_fifos);
+
/*
* IER sleep support. UARTs which have EFRs need the "extended
* capability" bit enabled. Note that on XR16C850s, we need to
@@ -1332,27 +1320,6 @@
}
/*
- * Clear the Tegra rx fifo after a break
- *
- * FIXME: This needs to become a port specific callback once we have a
- * framework for this
- */
-static void clear_rx_fifo(struct uart_8250_port *up)
-{
- unsigned int status, tmout = 10000;
- do {
- status = serial_in(up, UART_LSR);
- if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))
- status = serial_in(up, UART_RX);
- else
- break;
- if (--tmout == 0)
- break;
- udelay(1);
- } while (1);
-}
-
-/*
* serial8250_rx_chars: processes according to the passed in LSR
* value, and returns the remaining LSR bits not handled
* by this Rx routine.
@@ -1386,20 +1353,10 @@
up->lsr_saved_flags = 0;
if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
- /*
- * For statistics only
- */
if (lsr & UART_LSR_BI) {
lsr &= ~(UART_LSR_FE | UART_LSR_PE);
port->icount.brk++;
/*
- * If tegra port then clear the rx fifo to
- * accept another break/character.
- */
- if (port->type == PORT_TEGRA)
- clear_rx_fifo(up);
-
- /*
* We do the SysRQ and SAK checking
* here because otherwise the break
* may get masked by ignore_status_mask
@@ -2280,10 +2237,11 @@
quot++;
if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
- if (baud < 2400)
- fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
- else
- fcr = uart_config[port->type].fcr;
+ fcr = uart_config[port->type].fcr;
+ if (baud < 2400) {
+ fcr &= ~UART_FCR_TRIGGER_MASK;
+ fcr |= UART_FCR_TRIGGER_1;
+ }
}
/*
@@ -3037,6 +2995,7 @@
port.serial_in = p->serial_in;
port.serial_out = p->serial_out;
port.handle_irq = p->handle_irq;
+ port.handle_break = p->handle_break;
port.set_termios = p->set_termios;
port.pm = p->pm;
port.dev = &dev->dev;
@@ -3153,6 +3112,84 @@
}
/**
+ * serial8250_register_8250_port - register a serial port
+ * @port: serial port template
+ *
+ * Configure the serial port specified by the request. If the
+ * port exists and is in use, it is hung up and unregistered
+ * first.
+ *
+ * The port is then probed and if necessary the IRQ is autodetected
+ * If this fails an error is returned.
+ *
+ * On success the port is ready to use and the line number is returned.
+ */
+int serial8250_register_8250_port(struct uart_8250_port *up)
+{
+ struct uart_8250_port *uart;
+ int ret = -ENOSPC;
+
+ if (up->port.uartclk == 0)
+ return -EINVAL;
+
+ mutex_lock(&serial_mutex);
+
+ uart = serial8250_find_match_or_unused(&up->port);
+ if (uart) {
+ uart_remove_one_port(&serial8250_reg, &uart->port);
+
+ uart->port.iobase = up->port.iobase;
+ uart->port.membase = up->port.membase;
+ uart->port.irq = up->port.irq;
+ uart->port.irqflags = up->port.irqflags;
+ uart->port.uartclk = up->port.uartclk;
+ uart->port.fifosize = up->port.fifosize;
+ uart->port.regshift = up->port.regshift;
+ uart->port.iotype = up->port.iotype;
+ uart->port.flags = up->port.flags | UPF_BOOT_AUTOCONF;
+ uart->port.mapbase = up->port.mapbase;
+ uart->port.private_data = up->port.private_data;
+ if (up->port.dev)
+ uart->port.dev = up->port.dev;
+
+ if (up->port.flags & UPF_FIXED_TYPE)
+ serial8250_init_fixed_type_port(uart, up->port.type);
+
+ set_io_from_upio(&uart->port);
+ /* Possibly override default I/O functions. */
+ if (up->port.serial_in)
+ uart->port.serial_in = up->port.serial_in;
+ if (up->port.serial_out)
+ uart->port.serial_out = up->port.serial_out;
+ if (up->port.handle_irq)
+ uart->port.handle_irq = up->port.handle_irq;
+ /* Possibly override set_termios call */
+ if (up->port.set_termios)
+ uart->port.set_termios = up->port.set_termios;
+ if (up->port.pm)
+ uart->port.pm = up->port.pm;
+ if (up->port.handle_break)
+ uart->port.handle_break = up->port.handle_break;
+ if (up->dl_read)
+ uart->dl_read = up->dl_read;
+ if (up->dl_write)
+ uart->dl_write = up->dl_write;
+
+ if (serial8250_isa_config != NULL)
+ serial8250_isa_config(0, &uart->port,
+ &uart->capabilities);
+
+ ret = uart_add_one_port(&serial8250_reg, &uart->port);
+ if (ret == 0)
+ ret = uart->port.line;
+ }
+ mutex_unlock(&serial_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(serial8250_register_8250_port);
+
+/**
* serial8250_register_port - register a serial port
* @port: serial port template
*
@@ -3167,60 +3204,11 @@
*/
int serial8250_register_port(struct uart_port *port)
{
- struct uart_8250_port *uart;
- int ret = -ENOSPC;
+ struct uart_8250_port up;
- if (port->uartclk == 0)
- return -EINVAL;
-
- mutex_lock(&serial_mutex);
-
- uart = serial8250_find_match_or_unused(port);
- if (uart) {
- uart_remove_one_port(&serial8250_reg, &uart->port);
-
- uart->port.iobase = port->iobase;
- uart->port.membase = port->membase;
- uart->port.irq = port->irq;
- uart->port.irqflags = port->irqflags;
- uart->port.uartclk = port->uartclk;
- uart->port.fifosize = port->fifosize;
- uart->port.regshift = port->regshift;
- uart->port.iotype = port->iotype;
- uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
- uart->port.mapbase = port->mapbase;
- uart->port.private_data = port->private_data;
- if (port->dev)
- uart->port.dev = port->dev;
-
- if (port->flags & UPF_FIXED_TYPE)
- serial8250_init_fixed_type_port(uart, port->type);
-
- set_io_from_upio(&uart->port);
- /* Possibly override default I/O functions. */
- if (port->serial_in)
- uart->port.serial_in = port->serial_in;
- if (port->serial_out)
- uart->port.serial_out = port->serial_out;
- if (port->handle_irq)
- uart->port.handle_irq = port->handle_irq;
- /* Possibly override set_termios call */
- if (port->set_termios)
- uart->port.set_termios = port->set_termios;
- if (port->pm)
- uart->port.pm = port->pm;
-
- if (serial8250_isa_config != NULL)
- serial8250_isa_config(0, &uart->port,
- &uart->capabilities);
-
- ret = uart_add_one_port(&serial8250_reg, &uart->port);
- if (ret == 0)
- ret = uart->port.line;
- }
- mutex_unlock(&serial_mutex);
-
- return ret;
+ memset(&up, 0, sizeof(up));
+ memcpy(&up.port, port, sizeof(*port));
+ return serial8250_register_8250_port(&up);
}
EXPORT_SYMBOL(serial8250_register_port);
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 2868a1d..f9719d1 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -37,6 +37,10 @@
unsigned char lsr_saved_flags;
#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
unsigned char msr_saved_flags;
+
+ /* 8250 specific callbacks */
+ int (*dl_read)(struct uart_8250_port *);
+ void (*dl_write)(struct uart_8250_port *, int);
};
struct old_serial_port {
@@ -96,6 +100,18 @@
up->port.serial_out(&up->port, offset, value);
}
+void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p);
+
+static inline int serial_dl_read(struct uart_8250_port *up)
+{
+ return up->dl_read(up);
+}
+
+static inline void serial_dl_write(struct uart_8250_port *up, int value)
+{
+ up->dl_write(up, value);
+}
+
#if defined(__alpha__) && !defined(CONFIG_PCI)
/*
* Digital did something really horribly wrong with the OUT1 and OUT2
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
new file mode 100644
index 0000000..3a0363e
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -0,0 +1,186 @@
+/*
+ * Renesas Emma Mobile 8250 driver
+ *
+ * Copyright (C) 2012 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+
+#include "8250.h"
+
+#define UART_DLL_EM 9
+#define UART_DLM_EM 10
+
+struct serial8250_em_priv {
+ struct clk *sclk;
+ int line;
+};
+
+static void serial8250_em_serial_out(struct uart_port *p, int offset, int value)
+{
+ switch (offset) {
+ case UART_TX: /* TX @ 0x00 */
+ writeb(value, p->membase);
+ break;
+ case UART_FCR: /* FCR @ 0x0c (+1) */
+ case UART_LCR: /* LCR @ 0x10 (+1) */
+ case UART_MCR: /* MCR @ 0x14 (+1) */
+ case UART_SCR: /* SCR @ 0x20 (+1) */
+ writel(value, p->membase + ((offset + 1) << 2));
+ break;
+ case UART_IER: /* IER @ 0x04 */
+ value &= 0x0f; /* only 4 valid bits - not Xscale */
+ /* fall-through */
+ case UART_DLL_EM: /* DLL @ 0x24 (+9) */
+ case UART_DLM_EM: /* DLM @ 0x28 (+9) */
+ writel(value, p->membase + (offset << 2));
+ }
+}
+
+static unsigned int serial8250_em_serial_in(struct uart_port *p, int offset)
+{
+ switch (offset) {
+ case UART_RX: /* RX @ 0x00 */
+ return readb(p->membase);
+ case UART_MCR: /* MCR @ 0x14 (+1) */
+ case UART_LSR: /* LSR @ 0x18 (+1) */
+ case UART_MSR: /* MSR @ 0x1c (+1) */
+ case UART_SCR: /* SCR @ 0x20 (+1) */
+ return readl(p->membase + ((offset + 1) << 2));
+ case UART_IER: /* IER @ 0x04 */
+ case UART_IIR: /* IIR @ 0x08 */
+ case UART_DLL_EM: /* DLL @ 0x24 (+9) */
+ case UART_DLM_EM: /* DLM @ 0x28 (+9) */
+ return readl(p->membase + (offset << 2));
+ }
+ return 0;
+}
+
+static int serial8250_em_serial_dl_read(struct uart_8250_port *up)
+{
+ return serial_in(up, UART_DLL_EM) | serial_in(up, UART_DLM_EM) << 8;
+}
+
+static void serial8250_em_serial_dl_write(struct uart_8250_port *up, int value)
+{
+ serial_out(up, UART_DLL_EM, value & 0xff);
+ serial_out(up, UART_DLM_EM, value >> 8 & 0xff);
+}
+
+static int __devinit serial8250_em_probe(struct platform_device *pdev)
+{
+ struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ struct serial8250_em_priv *priv;
+ struct uart_8250_port up;
+ int ret = -EINVAL;
+
+ if (!regs || !irq) {
+ dev_err(&pdev->dev, "missing registers or irq\n");
+ goto err0;
+ }
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(&pdev->dev, "unable to allocate private data\n");
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ priv->sclk = clk_get(&pdev->dev, "sclk");
+ if (IS_ERR(priv->sclk)) {
+ dev_err(&pdev->dev, "unable to get clock\n");
+ ret = PTR_ERR(priv->sclk);
+ goto err1;
+ }
+
+ memset(&up, 0, sizeof(up));
+ up.port.mapbase = regs->start;
+ up.port.irq = irq->start;
+ up.port.type = PORT_UNKNOWN;
+ up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP;
+ up.port.dev = &pdev->dev;
+ up.port.private_data = priv;
+
+ clk_enable(priv->sclk);
+ up.port.uartclk = clk_get_rate(priv->sclk);
+
+ up.port.iotype = UPIO_MEM32;
+ up.port.serial_in = serial8250_em_serial_in;
+ up.port.serial_out = serial8250_em_serial_out;
+ up.dl_read = serial8250_em_serial_dl_read;
+ up.dl_write = serial8250_em_serial_dl_write;
+
+ ret = serial8250_register_8250_port(&up);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "unable to register 8250 port\n");
+ goto err2;
+ }
+
+ priv->line = ret;
+ platform_set_drvdata(pdev, priv);
+ return 0;
+
+ err2:
+ clk_disable(priv->sclk);
+ clk_put(priv->sclk);
+ err1:
+ kfree(priv);
+ err0:
+ return ret;
+}
+
+static int __devexit serial8250_em_remove(struct platform_device *pdev)
+{
+ struct serial8250_em_priv *priv = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(priv->line);
+ clk_disable(priv->sclk);
+ clk_put(priv->sclk);
+ kfree(priv);
+ return 0;
+}
+
+static const struct of_device_id serial8250_em_dt_ids[] __devinitconst = {
+ { .compatible = "renesas,em-uart", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, serial8250_em_dt_ids);
+
+static struct platform_driver serial8250_em_platform_driver = {
+ .driver = {
+ .name = "serial8250-em",
+ .of_match_table = serial8250_em_dt_ids,
+ .owner = THIS_MODULE,
+ },
+ .probe = serial8250_em_probe,
+ .remove = __devexit_p(serial8250_em_remove),
+};
+
+module_platform_driver(serial8250_em_platform_driver);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Renesas Emma Mobile 8250 Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 858dca8..28e7c7c 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -17,6 +17,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/tty.h>
+#include <linux/serial_reg.h>
#include <linux/serial_core.h>
#include <linux/8250_pci.h>
#include <linux/bitops.h>
@@ -1092,11 +1093,49 @@
return pci_default_setup(priv, board, port, idx);
}
+static void kt_handle_break(struct uart_port *p)
+{
+ struct uart_8250_port *up =
+ container_of(p, struct uart_8250_port, port);
+ /*
+ * On receipt of a BI, serial device in Intel ME (Intel
+ * management engine) needs to have its fifos cleared for sane
+ * SOL (Serial Over Lan) output.
+ */
+ serial8250_clear_and_reinit_fifos(up);
+}
+
+static unsigned int kt_serial_in(struct uart_port *p, int offset)
+{
+ struct uart_8250_port *up =
+ container_of(p, struct uart_8250_port, port);
+ unsigned int val;
+
+ /*
+ * When the Intel ME (management engine) gets reset its serial
+ * port registers could return 0 momentarily. Functions like
+ * serial8250_console_write, read and save the IER, perform
+ * some operation and then restore it. In order to avoid
+ * setting IER register inadvertently to 0, if the value read
+ * is 0, double check with ier value in uart_8250_port and use
+ * that instead. up->ier should be the same value as what is
+ * currently configured.
+ */
+ val = inb(p->iobase + offset);
+ if (offset == UART_IER) {
+ if (val == 0)
+ val = up->ier;
+ }
+ return val;
+}
+
static int kt_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_port *port, int idx)
{
port->flags |= UPF_BUG_THRE;
+ port->serial_in = kt_serial_in;
+ port->handle_break = kt_handle_break;
return skip_tx_en_setup(priv, board, port, idx);
}
@@ -1609,54 +1648,72 @@
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8811,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8812,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8813,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8814,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8027,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8028,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8029,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x800C,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x800D,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
@@ -2775,6 +2832,12 @@
for (i = 0; i < priv->nr; i++)
if (priv->line[i] >= 0)
serial8250_suspend_port(priv->line[i]);
+
+ /*
+ * Ensure that every init quirk is properly torn down
+ */
+ if (priv->quirk->exit)
+ priv->quirk->exit(priv->dev);
}
EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 591f801..8bc7ecb 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -278,3 +278,11 @@
help
Selecting this option will enable handling of the extra features
present in the Synopsys DesignWare APB UART.
+
+config SERIAL_8250_EM
+ tristate "Support for Emma Mobile intergrated serial port"
+ depends on SERIAL_8250 && ARM && HAVE_CLK
+ help
+ Selecting this option will add support for the integrated serial
+ port hardware found on the Emma Mobile line of processors.
+ If unsure, say N.
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 867bba7..3f35eac 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -18,3 +18,4 @@
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
+obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 062ef8c..4ad721f 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -68,30 +68,6 @@
#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
#define UART_DUMMY_DR_RX (1 << 16)
-
-#define UART_WA_SAVE_NR 14
-
-static void pl011_lockup_wa(unsigned long data);
-static const u32 uart_wa_reg[UART_WA_SAVE_NR] = {
- ST_UART011_DMAWM,
- ST_UART011_TIMEOUT,
- ST_UART011_LCRH_RX,
- UART011_IBRD,
- UART011_FBRD,
- ST_UART011_LCRH_TX,
- UART011_IFLS,
- ST_UART011_XFCR,
- ST_UART011_XON1,
- ST_UART011_XON2,
- ST_UART011_XOFF1,
- ST_UART011_XOFF2,
- UART011_CR,
- UART011_IMSC
-};
-
-static u32 uart_wa_regdata[UART_WA_SAVE_NR];
-static DECLARE_TASKLET(pl011_lockup_tlet, pl011_lockup_wa, 0);
-
/* There is by now at least one vendor with differing details, so handle it */
struct vendor_data {
unsigned int ifls;
@@ -101,6 +77,7 @@
bool oversampling;
bool interrupt_may_hang; /* vendor-specific */
bool dma_threshold;
+ bool cts_event_workaround;
};
static struct vendor_data vendor_arm = {
@@ -110,6 +87,7 @@
.lcrh_rx = UART011_LCRH,
.oversampling = false,
.dma_threshold = false,
+ .cts_event_workaround = false,
};
static struct vendor_data vendor_st = {
@@ -120,6 +98,7 @@
.oversampling = true,
.interrupt_may_hang = true,
.dma_threshold = true,
+ .cts_event_workaround = true,
};
static struct uart_amba_port *amba_ports[UART_NR];
@@ -1055,69 +1034,6 @@
#define pl011_dma_flush_buffer NULL
#endif
-
-/*
- * pl011_lockup_wa
- * This workaround aims to break the deadlock situation
- * when after long transfer over uart in hardware flow
- * control, uart interrupt registers cannot be cleared.
- * Hence uart transfer gets blocked.
- *
- * It is seen that during such deadlock condition ICR
- * don't get cleared even on multiple write. This leads
- * pass_counter to decrease and finally reach zero. This
- * can be taken as trigger point to run this UART_BT_WA.
- *
- */
-static void pl011_lockup_wa(unsigned long data)
-{
- struct uart_amba_port *uap = amba_ports[0];
- void __iomem *base = uap->port.membase;
- struct circ_buf *xmit = &uap->port.state->xmit;
- struct tty_struct *tty = uap->port.state->port.tty;
- int buf_empty_retries = 200;
- int loop;
-
- /* Stop HCI layer from submitting data for tx */
- tty->hw_stopped = 1;
- while (!uart_circ_empty(xmit)) {
- if (buf_empty_retries-- == 0)
- break;
- udelay(100);
- }
-
- /* Backup registers */
- for (loop = 0; loop < UART_WA_SAVE_NR; loop++)
- uart_wa_regdata[loop] = readl(base + uart_wa_reg[loop]);
-
- /* Disable UART so that FIFO data is flushed out */
- writew(0x00, uap->port.membase + UART011_CR);
-
- /* Soft reset UART module */
- if (uap->port.dev->platform_data) {
- struct amba_pl011_data *plat;
-
- plat = uap->port.dev->platform_data;
- if (plat->reset)
- plat->reset();
- }
-
- /* Restore registers */
- for (loop = 0; loop < UART_WA_SAVE_NR; loop++)
- writew(uart_wa_regdata[loop] ,
- uap->port.membase + uart_wa_reg[loop]);
-
- /* Initialise the old status of the modem signals */
- uap->old_status = readw(uap->port.membase + UART01x_FR) &
- UART01x_FR_MODEM_ANY;
-
- if (readl(base + UART011_MIS) & 0x2)
- printk(KERN_EMERG "UART_BT_WA: ***FAILED***\n");
-
- /* Start Tx/Rx */
- tty->hw_stopped = 0;
-}
-
static void pl011_stop_tx(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -1246,12 +1162,26 @@
unsigned long flags;
unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
int handled = 0;
+ unsigned int dummy_read;
spin_lock_irqsave(&uap->port.lock, flags);
status = readw(uap->port.membase + UART011_MIS);
if (status) {
do {
+ if (uap->vendor->cts_event_workaround) {
+ /* workaround to make sure that all bits are unlocked.. */
+ writew(0x00, uap->port.membase + UART011_ICR);
+
+ /*
+ * WA: introduce 26ns(1 uart clk) delay before W1C;
+ * single apb access will incur 2 pclk(133.12Mhz) delay,
+ * so add 2 dummy reads
+ */
+ dummy_read = readw(uap->port.membase + UART011_ICR);
+ dummy_read = readw(uap->port.membase + UART011_ICR);
+ }
+
writew(status & ~(UART011_TXIS|UART011_RTIS|
UART011_RXIS),
uap->port.membase + UART011_ICR);
@@ -1268,11 +1198,8 @@
if (status & UART011_TXIS)
pl011_tx_chars(uap);
- if (pass_counter-- == 0) {
- if (uap->interrupt_may_hang)
- tasklet_schedule(&pl011_lockup_tlet);
+ if (pass_counter-- == 0)
break;
- }
status = readw(uap->port.membase + UART011_MIS);
} while (status != 0);
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 5832fde..bd97db2 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -1,7 +1,7 @@
/*
* Blackfin On-Chip Serial Driver
*
- * Copyright 2006-2010 Analog Devices Inc.
+ * Copyright 2006-2011 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
@@ -35,10 +35,6 @@
#include <asm/portmux.h>
#include <asm/cacheflush.h>
#include <asm/dma.h>
-
-#define port_membase(uart) (((struct bfin_serial_port *)(uart))->port.membase)
-#define get_lsr_cache(uart) (((struct bfin_serial_port *)(uart))->lsr)
-#define put_lsr_cache(uart, v) (((struct bfin_serial_port *)(uart))->lsr = (v))
#include <asm/bfin_serial.h>
#ifdef CONFIG_SERIAL_BFIN_MODULE
@@ -166,7 +162,7 @@
uart->tx_count = 0;
uart->tx_done = 1;
#else
-#ifdef CONFIG_BF54x
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
/* Clear TFI bit */
UART_PUT_LSR(uart, TFI);
#endif
@@ -337,7 +333,7 @@
struct circ_buf *xmit = &uart->port.state->xmit;
if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
-#ifdef CONFIG_BF54x
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
/* Clear TFI bit */
UART_PUT_LSR(uart, TFI);
#endif
@@ -536,7 +532,7 @@
*/
UART_CLEAR_IER(uart, ETBEI);
uart->port.icount.tx += uart->tx_count;
- if (!uart_circ_empty(xmit)) {
+ if (!(xmit->tail == 0 && xmit->head == 0)) {
xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -553,7 +549,7 @@
static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
{
struct bfin_serial_port *uart = dev_id;
- unsigned short irqstat;
+ unsigned int irqstat;
int x_pos, pos;
spin_lock(&uart->rx_lock);
@@ -586,7 +582,7 @@
static unsigned int bfin_serial_tx_empty(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
- unsigned short lsr;
+ unsigned int lsr;
lsr = UART_GET_LSR(uart);
if (lsr & TEMT)
@@ -598,7 +594,7 @@
static void bfin_serial_break_ctl(struct uart_port *port, int break_state)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
- u16 lcr = UART_GET_LCR(uart);
+ u32 lcr = UART_GET_LCR(uart);
if (break_state)
lcr |= SB;
else
@@ -745,7 +741,7 @@
}
/* CTS RTS PINs are negative assertive. */
- UART_PUT_MCR(uart, ACTS);
+ UART_PUT_MCR(uart, UART_GET_MCR(uart) | ACTS);
UART_SET_IER(uart, EDSSI);
}
#endif
@@ -803,7 +799,7 @@
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
unsigned long flags;
unsigned int baud, quot;
- unsigned short val, ier, lcr = 0;
+ unsigned int ier, lcr = 0;
switch (termios->c_cflag & CSIZE) {
case CS8:
@@ -875,26 +871,23 @@
/* Disable UART */
ier = UART_GET_IER(uart);
+ UART_PUT_GCTL(uart, UART_GET_GCTL(uart) & ~UCEN);
UART_DISABLE_INTS(uart);
- /* Set DLAB in LCR to Access DLL and DLH */
+ /* Set DLAB in LCR to Access CLK */
UART_SET_DLAB(uart);
- UART_PUT_DLL(uart, quot & 0xFF);
- UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
+ UART_PUT_CLK(uart, quot);
SSYNC();
/* Clear DLAB in LCR to Access THR RBR IER */
UART_CLEAR_DLAB(uart);
- UART_PUT_LCR(uart, lcr);
+ UART_PUT_LCR(uart, (UART_GET_LCR(uart) & ~LCR_MASK) | lcr);
/* Enable UART */
UART_ENABLE_INTS(uart, ier);
-
- val = UART_GET_GCTL(uart);
- val |= UCEN;
- UART_PUT_GCTL(uart, val);
+ UART_PUT_GCTL(uart, UART_GET_GCTL(uart) | UCEN);
/* Port speed changed, update the per-port timeout. */
uart_update_timeout(port, termios->c_cflag, baud);
@@ -954,17 +947,17 @@
static void bfin_serial_set_ldisc(struct uart_port *port, int ld)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
- unsigned short val;
+ unsigned int val;
switch (ld) {
case N_IRDA:
val = UART_GET_GCTL(uart);
- val |= (IREN | RPOLC);
+ val |= (UMOD_IRDA | RPOLC);
UART_PUT_GCTL(uart, val);
break;
default:
val = UART_GET_GCTL(uart);
- val &= ~(IREN | RPOLC);
+ val &= ~(UMOD_MASK | RPOLC);
UART_PUT_GCTL(uart, val);
}
}
@@ -972,13 +965,13 @@
static void bfin_serial_reset_irda(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
- unsigned short val;
+ unsigned int val;
val = UART_GET_GCTL(uart);
- val &= ~(IREN | RPOLC);
+ val &= ~(UMOD_MASK | RPOLC);
UART_PUT_GCTL(uart, val);
SSYNC();
- val |= (IREN | RPOLC);
+ val |= (UMOD_IRDA | RPOLC);
UART_PUT_GCTL(uart, val);
SSYNC();
}
@@ -1070,12 +1063,12 @@
bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
int *parity, int *bits)
{
- unsigned short status;
+ unsigned int status;
status = UART_GET_IER(uart) & (ERBFI | ETBEI);
if (status == (ERBFI | ETBEI)) {
/* ok, the port was enabled */
- u16 lcr, dlh, dll;
+ u32 lcr, clk;
lcr = UART_GET_LCR(uart);
@@ -1086,30 +1079,17 @@
else
*parity = 'o';
}
- switch (lcr & 0x03) {
- case 0:
- *bits = 5;
- break;
- case 1:
- *bits = 6;
- break;
- case 2:
- *bits = 7;
- break;
- case 3:
- *bits = 8;
- break;
- }
- /* Set DLAB in LCR to Access DLL and DLH */
+ *bits = ((lcr & WLS_MASK) >> WLS_OFFSET) + 5;
+
+ /* Set DLAB in LCR to Access CLK */
UART_SET_DLAB(uart);
- dll = UART_GET_DLL(uart);
- dlh = UART_GET_DLH(uart);
+ clk = UART_GET_CLK(uart);
/* Clear DLAB in LCR to Access THR RBR IER */
UART_CLEAR_DLAB(uart);
- *baud = get_sclk() / (16*(dll | dlh << 8));
+ *baud = get_sclk() / (16*clk);
}
pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits);
}
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 5b07c0c..7264d4d 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -952,19 +952,6 @@
/* Input */
#define E100_DSR_GET(info) ((*e100_modem_pins[(info)->line].dsr_port) & e100_modem_pins[(info)->line].dsr_mask)
-
-/*
- * tmp_buf is used as a temporary buffer by serial_write. We need to
- * lock it in case the memcpy_fromfs blocks while swapping in a page,
- * and some other program tries to do a serial write at the same time.
- * Since the lock will only come under contention when the system is
- * swapping and available memory is low, it makes sense to share one
- * buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
- */
-static unsigned char *tmp_buf;
-static DEFINE_MUTEX(tmp_buf_mutex);
-
/* Calculate the chartime depending on baudrate, numbor of bits etc. */
static void update_char_time(struct e100_serial * info)
{
@@ -3150,7 +3137,7 @@
/* first some sanity checks */
- if (!tty || !info->xmit.buf || !tmp_buf)
+ if (!tty || !info->xmit.buf)
return 0;
#ifdef SERIAL_DEBUG_DATA
@@ -3989,7 +3976,7 @@
*/
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
- wait_event_interruptible_tty(info->close_wait,
+ wait_event_interruptible_tty(tty, info->close_wait,
!(info->flags & ASYNC_CLOSING));
#ifdef SERIAL_DO_RESTART
if (info->flags & ASYNC_HUP_NOTIFY)
@@ -4065,9 +4052,9 @@
printk("block_til_ready blocking: ttyS%d, count = %d\n",
info->line, info->count);
#endif
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&info->open_wait, &wait);
@@ -4106,7 +4093,6 @@
{
struct e100_serial *info;
int retval;
- unsigned long page;
int allocated_resources = 0;
info = rs_table + tty->index;
@@ -4124,23 +4110,12 @@
tty->low_latency = !!(info->flags & ASYNC_LOW_LATENCY);
- if (!tmp_buf) {
- page = get_zeroed_page(GFP_KERNEL);
- if (!page) {
- return -ENOMEM;
- }
- if (tmp_buf)
- free_page(page);
- else
- tmp_buf = (unsigned char *) page;
- }
-
/*
* If the port is in the middle of closing, bail out now
*/
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
- wait_event_interruptible_tty(info->close_wait,
+ wait_event_interruptible_tty(tty, info->close_wait,
!(info->flags & ASYNC_CLOSING));
#ifdef SERIAL_DO_RESTART
return ((info->flags & ASYNC_HUP_NOTIFY) ?
@@ -4487,6 +4462,7 @@
info->enabled = 0;
}
}
+ tty_port_init(&info->port);
info->uses_dma_in = 0;
info->uses_dma_out = 0;
info->line = i;
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 7081600..ec56d83 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -370,6 +370,8 @@
writel(ctrl, u->membase + AUART_LINECTRL);
writel(ctrl2, u->membase + AUART_CTRL2);
+
+ uart_update_timeout(u, termios->c_cflag, baud);
}
static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index e8c9cee..5410c06 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -12,10 +12,13 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/delay.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <linux/of_serial.h>
#include <linux/of_platform.h>
#include <linux/nwpserial.h>
@@ -24,6 +27,26 @@
int line;
};
+#ifdef CONFIG_ARCH_TEGRA
+void tegra_serial_handle_break(struct uart_port *p)
+{
+ unsigned int status, tmout = 10000;
+
+ do {
+ status = p->serial_in(p, UART_LSR);
+ if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))
+ status = p->serial_in(p, UART_RX);
+ else
+ break;
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while (1);
+}
+/* FIXME remove this export when tegra finishes conversion to open firmware */
+EXPORT_SYMBOL_GPL(tegra_serial_handle_break);
+#endif
+
/*
* Fill a struct uart_port for a given device node
*/
@@ -84,6 +107,9 @@
| UPF_FIXED_PORT | UPF_FIXED_TYPE;
port->dev = &ofdev->dev;
+ if (type == PORT_TEGRA)
+ port->handle_break = tegra_serial_handle_break;
+
return 0;
}
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d00b38e..d3cda0c 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -44,6 +44,13 @@
#include <plat/dmtimer.h>
#include <plat/omap-serial.h>
+#define UART_BUILD_REVISION(x, y) (((x) << 8) | (y))
+
+#define OMAP_UART_REV_42 0x0402
+#define OMAP_UART_REV_46 0x0406
+#define OMAP_UART_REV_52 0x0502
+#define OMAP_UART_REV_63 0x0603
+
#define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/
/* SCR register bitmasks */
@@ -53,6 +60,17 @@
#define OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT 6
#define OMAP_UART_FCR_RX_FIFO_TRIG_MASK (0x3 << 6)
+/* MVR register bitmasks */
+#define OMAP_UART_MVR_SCHEME_SHIFT 30
+
+#define OMAP_UART_LEGACY_MVR_MAJ_MASK 0xf0
+#define OMAP_UART_LEGACY_MVR_MAJ_SHIFT 4
+#define OMAP_UART_LEGACY_MVR_MIN_MASK 0x0f
+
+#define OMAP_UART_MVR_MAJ_MASK 0x700
+#define OMAP_UART_MVR_MAJ_SHIFT 8
+#define OMAP_UART_MVR_MIN_MASK 0x3f
+
static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
/* Forward declaration of functions */
@@ -1346,6 +1364,59 @@
return;
}
+static void omap_serial_fill_features_erratas(struct uart_omap_port *up)
+{
+ u32 mvr, scheme;
+ u16 revision, major, minor;
+
+ mvr = serial_in(up, UART_OMAP_MVER);
+
+ /* Check revision register scheme */
+ scheme = mvr >> OMAP_UART_MVR_SCHEME_SHIFT;
+
+ switch (scheme) {
+ case 0: /* Legacy Scheme: OMAP2/3 */
+ /* MINOR_REV[0:4], MAJOR_REV[4:7] */
+ major = (mvr & OMAP_UART_LEGACY_MVR_MAJ_MASK) >>
+ OMAP_UART_LEGACY_MVR_MAJ_SHIFT;
+ minor = (mvr & OMAP_UART_LEGACY_MVR_MIN_MASK);
+ break;
+ case 1:
+ /* New Scheme: OMAP4+ */
+ /* MINOR_REV[0:5], MAJOR_REV[8:10] */
+ major = (mvr & OMAP_UART_MVR_MAJ_MASK) >>
+ OMAP_UART_MVR_MAJ_SHIFT;
+ minor = (mvr & OMAP_UART_MVR_MIN_MASK);
+ break;
+ default:
+ dev_warn(&up->pdev->dev,
+ "Unknown %s revision, defaulting to highest\n",
+ up->name);
+ /* highest possible revision */
+ major = 0xff;
+ minor = 0xff;
+ }
+
+ /* normalize revision for the driver */
+ revision = UART_BUILD_REVISION(major, minor);
+
+ switch (revision) {
+ case OMAP_UART_REV_46:
+ up->errata |= (UART_ERRATA_i202_MDR1_ACCESS |
+ UART_ERRATA_i291_DMA_FORCEIDLE);
+ break;
+ case OMAP_UART_REV_52:
+ up->errata |= (UART_ERRATA_i202_MDR1_ACCESS |
+ UART_ERRATA_i291_DMA_FORCEIDLE);
+ break;
+ case OMAP_UART_REV_63:
+ up->errata |= UART_ERRATA_i202_MDR1_ACCESS;
+ break;
+ default:
+ break;
+ }
+}
+
static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
{
struct omap_uart_port_info *omap_up_info;
@@ -1439,7 +1510,6 @@
"%d\n", DEFAULT_CLK_SPEED);
}
up->uart_dma.uart_base = mem->start;
- up->errata = omap_up_info->errata;
if (omap_up_info->dma_enabled) {
up->uart_dma.uart_dma_tx = dma_tx->start;
@@ -1469,6 +1539,8 @@
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
+ omap_serial_fill_features_erratas(up);
+
ui[up->port.line] = up;
serial_omap_add_console_port(up);
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index c2816f4..4fdec6a6 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -39,6 +39,7 @@
PCH_UART_HANDLED_RX_ERR_INT_SHIFT,
PCH_UART_HANDLED_RX_TRG_INT_SHIFT,
PCH_UART_HANDLED_MS_INT_SHIFT,
+ PCH_UART_HANDLED_LS_INT_SHIFT,
};
enum {
@@ -63,6 +64,8 @@
PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1))
#define PCH_UART_HANDLED_MS_INT (1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1))
+#define PCH_UART_HANDLED_LS_INT (1<<((PCH_UART_HANDLED_LS_INT_SHIFT)<<1))
+
#define PCH_UART_RBR 0x00
#define PCH_UART_THR 0x00
@@ -229,7 +232,6 @@
int start_tx;
int start_rx;
int tx_empty;
- int int_dis_flag;
int trigger;
int trigger_level;
struct pch_uart_buffer rxbuf;
@@ -237,7 +239,6 @@
unsigned int fcr;
unsigned int mcr;
unsigned int use_dma;
- unsigned int use_dma_flag;
struct dma_async_tx_descriptor *desc_tx;
struct dma_async_tx_descriptor *desc_rx;
struct pch_dma_slave param_tx;
@@ -560,14 +561,10 @@
return i;
}
-static unsigned int pch_uart_hal_get_iid(struct eg20t_port *priv)
+static unsigned char pch_uart_hal_get_iid(struct eg20t_port *priv)
{
- unsigned int iir;
- int ret;
-
- iir = ioread8(priv->membase + UART_IIR);
- ret = (iir & (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP));
- return ret;
+ return ioread8(priv->membase + UART_IIR) &\
+ (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP);
}
static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv)
@@ -666,10 +663,13 @@
dma_release_channel(priv->chan_rx);
priv->chan_rx = NULL;
}
- if (sg_dma_address(&priv->sg_rx))
- dma_free_coherent(port->dev, port->fifosize,
- sg_virt(&priv->sg_rx),
- sg_dma_address(&priv->sg_rx));
+
+ if (priv->rx_buf_dma) {
+ dma_free_coherent(port->dev, port->fifosize, priv->rx_buf_virt,
+ priv->rx_buf_dma);
+ priv->rx_buf_virt = NULL;
+ priv->rx_buf_dma = 0;
+ }
return;
}
@@ -1053,12 +1053,17 @@
unsigned int handled;
u8 lsr;
int ret = 0;
- unsigned int iid;
+ unsigned char iid;
unsigned long flags;
+ int next = 1;
+ u8 msr;
spin_lock_irqsave(&priv->port.lock, flags);
handled = 0;
- while ((iid = pch_uart_hal_get_iid(priv)) > 1) {
+ while (next) {
+ iid = pch_uart_hal_get_iid(priv);
+ if (iid & PCH_UART_IIR_IP) /* No Interrupt */
+ break;
switch (iid) {
case PCH_UART_IID_RLS: /* Receiver Line Status */
lsr = pch_uart_hal_get_line_status(priv);
@@ -1066,6 +1071,8 @@
UART_LSR_PE | UART_LSR_OE)) {
pch_uart_err_ir(priv, lsr);
ret = PCH_UART_HANDLED_RX_ERR_INT;
+ } else {
+ ret = PCH_UART_HANDLED_LS_INT;
}
break;
case PCH_UART_IID_RDR: /* Received Data Ready */
@@ -1092,20 +1099,22 @@
ret = handle_tx(priv);
break;
case PCH_UART_IID_MS: /* Modem Status */
- ret = PCH_UART_HANDLED_MS_INT;
+ msr = pch_uart_hal_get_modem(priv);
+ next = 0; /* MS ir prioirty is the lowest. So, MS ir
+ means final interrupt */
+ if ((msr & UART_MSR_ANY_DELTA) == 0)
+ break;
+ ret |= PCH_UART_HANDLED_MS_INT;
break;
default: /* Never junp to this label */
- dev_err(priv->port.dev, "%s:iid=%d (%lu)\n", __func__,
+ dev_err(priv->port.dev, "%s:iid=%02x (%lu)\n", __func__,
iid, jiffies);
ret = -1;
+ next = 0;
break;
}
handled |= (unsigned int)ret;
}
- if (handled == 0 && iid <= 1) {
- if (priv->int_dis_flag)
- priv->int_dis_flag = 0;
- }
spin_unlock_irqrestore(&priv->port.lock, flags);
return IRQ_RETVAL(handled);
@@ -1200,7 +1209,6 @@
priv = container_of(port, struct eg20t_port, port);
priv->start_rx = 0;
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
- priv->int_dis_flag = 1;
}
/* Enable the modem status interrupts. */
@@ -1447,7 +1455,6 @@
__func__);
return -EOPNOTSUPP;
#endif
- priv->use_dma_flag = 1;
dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n");
if (!priv->use_dma)
pch_request_dma(port);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 9c4c05b..246b823 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2282,6 +2282,7 @@
tty_unregister_driver(p);
put_tty_driver(p);
kfree(drv->state);
+ drv->state = NULL;
drv->tty_driver = NULL;
}
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 593d40a..5ed0daa 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -3338,9 +3338,9 @@
printk("%s(%d):block_til_ready blocking on %s count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
set_current_state(TASK_RUNNING);
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index aa1debf..45b43f1 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -3336,9 +3336,9 @@
}
DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
set_current_state(TASK_RUNNING);
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index a3dddc1..4a1e4f0 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -3357,9 +3357,9 @@
printk("%s(%d):%s block_til_ready() count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
set_current_state(TASK_RUNNING);
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 6c9b7cd..91e326f 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -185,25 +185,19 @@
/* Should possibly check if this fails for the largest buffer we
have queued and recycle that ? */
}
-
/**
- * tty_buffer_request_room - grow tty buffer if needed
+ * __tty_buffer_request_room - grow tty buffer if needed
* @tty: tty structure
* @size: size desired
*
* Make at least size bytes of linear space available for the tty
* buffer. If we fail return the size we managed to find.
- *
- * Locking: Takes tty->buf.lock
+ * Locking: Caller must hold tty->buf.lock
*/
-int tty_buffer_request_room(struct tty_struct *tty, size_t size)
+static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
{
struct tty_buffer *b, *n;
int left;
- unsigned long flags;
-
- spin_lock_irqsave(&tty->buf.lock, flags);
-
/* OPTIMISATION: We could keep a per tty "zero" sized buffer to
remove this conditional if its worth it. This would be invisible
to the callers */
@@ -225,9 +219,30 @@
size = left;
}
- spin_unlock_irqrestore(&tty->buf.lock, flags);
return size;
}
+
+
+/**
+ * tty_buffer_request_room - grow tty buffer if needed
+ * @tty: tty structure
+ * @size: size desired
+ *
+ * Make at least size bytes of linear space available for the tty
+ * buffer. If we fail return the size we managed to find.
+ *
+ * Locking: Takes tty->buf.lock
+ */
+int tty_buffer_request_room(struct tty_struct *tty, size_t size)
+{
+ unsigned long flags;
+ int length;
+
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ length = __tty_buffer_request_room(tty, size);
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+ return length;
+}
EXPORT_SYMBOL_GPL(tty_buffer_request_room);
/**
@@ -249,14 +264,22 @@
int copied = 0;
do {
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
- int space = tty_buffer_request_room(tty, goal);
- struct tty_buffer *tb = tty->buf.tail;
+ int space;
+ unsigned long flags;
+ struct tty_buffer *tb;
+
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ space = __tty_buffer_request_room(tty, goal);
+ tb = tty->buf.tail;
/* If there is no space then tb may be NULL */
- if (unlikely(space == 0))
+ if (unlikely(space == 0)) {
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
break;
+ }
memcpy(tb->char_buf_ptr + tb->used, chars, space);
memset(tb->flag_buf_ptr + tb->used, flag, space);
tb->used += space;
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
copied += space;
chars += space;
/* There is a small chance that we need to split the data over
@@ -286,14 +309,22 @@
int copied = 0;
do {
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
- int space = tty_buffer_request_room(tty, goal);
- struct tty_buffer *tb = tty->buf.tail;
+ int space;
+ unsigned long __flags;
+ struct tty_buffer *tb;
+
+ spin_lock_irqsave(&tty->buf.lock, __flags);
+ space = __tty_buffer_request_room(tty, goal);
+ tb = tty->buf.tail;
/* If there is no space then tb may be NULL */
- if (unlikely(space == 0))
+ if (unlikely(space == 0)) {
+ spin_unlock_irqrestore(&tty->buf.lock, __flags);
break;
+ }
memcpy(tb->char_buf_ptr + tb->used, chars, space);
memcpy(tb->flag_buf_ptr + tb->used, flags, space);
tb->used += space;
+ spin_unlock_irqrestore(&tty->buf.lock, __flags);
copied += space;
chars += space;
flags += space;
@@ -344,13 +375,20 @@
int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
size_t size)
{
- int space = tty_buffer_request_room(tty, size);
+ int space;
+ unsigned long flags;
+ struct tty_buffer *tb;
+
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ space = __tty_buffer_request_room(tty, size);
+
+ tb = tty->buf.tail;
if (likely(space)) {
- struct tty_buffer *tb = tty->buf.tail;
*chars = tb->char_buf_ptr + tb->used;
memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
tb->used += space;
}
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
return space;
}
EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
@@ -374,13 +412,20 @@
int tty_prepare_flip_string_flags(struct tty_struct *tty,
unsigned char **chars, char **flags, size_t size)
{
- int space = tty_buffer_request_room(tty, size);
+ int space;
+ unsigned long __flags;
+ struct tty_buffer *tb;
+
+ spin_lock_irqsave(&tty->buf.lock, __flags);
+ space = __tty_buffer_request_room(tty, size);
+
+ tb = tty->buf.tail;
if (likely(space)) {
- struct tty_buffer *tb = tty->buf.tail;
*chars = tb->char_buf_ptr + tb->used;
*flags = tb->flag_buf_ptr + tb->used;
tb->used += space;
}
+ spin_unlock_irqrestore(&tty->buf.lock, __flags);
return space;
}
EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index d939bd7..9e930c0 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -185,6 +185,7 @@
put_device(tty->dev);
kfree(tty->write_buf);
tty_buffer_free_all(tty);
+ tty->magic = 0xDEADDEAD;
kfree(tty);
}
@@ -573,7 +574,7 @@
}
spin_unlock(&redirect_lock);
- tty_lock();
+ tty_lock(tty);
/* some functions below drop BTM, so we need this bit */
set_bit(TTY_HUPPING, &tty->flags);
@@ -666,7 +667,7 @@
clear_bit(TTY_HUPPING, &tty->flags);
tty_ldisc_enable(tty);
- tty_unlock();
+ tty_unlock(tty);
if (f)
fput(f);
@@ -855,10 +856,11 @@
*/
void no_tty(void)
{
+ /* FIXME: Review locking here. The tty_lock never covered any race
+ between a new association and proc_clear_tty but possible we need
+ to protect against this anyway */
struct task_struct *tsk = current;
- tty_lock();
disassociate_ctty(0);
- tty_unlock();
proc_clear_tty(tsk);
}
@@ -1102,12 +1104,12 @@
{
if (tty) {
mutex_lock(&tty->atomic_write_lock);
- tty_lock();
+ tty_lock(tty);
if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) {
- tty_unlock();
+ tty_unlock(tty);
tty->ops->write(tty, msg, strlen(msg));
} else
- tty_unlock();
+ tty_unlock(tty);
tty_write_unlock(tty);
}
return;
@@ -1402,6 +1404,7 @@
}
initialize_tty_struct(tty, driver, idx);
+ tty_lock(tty);
retval = tty_driver_install_tty(driver, tty);
if (retval < 0)
goto err_deinit_tty;
@@ -1414,9 +1417,11 @@
retval = tty_ldisc_setup(tty, tty->link);
if (retval)
goto err_release_tty;
+ /* Return the tty locked so that it cannot vanish under the caller */
return tty;
err_deinit_tty:
+ tty_unlock(tty);
deinitialize_tty_struct(tty);
free_tty_struct(tty);
err_module_put:
@@ -1425,6 +1430,7 @@
/* call the tty release_tty routine to clean out this slot */
err_release_tty:
+ tty_unlock(tty);
printk_ratelimited(KERN_INFO "tty_init_dev: ldisc open failed, "
"clearing slot %d\n", idx);
release_tty(tty, idx);
@@ -1627,7 +1633,7 @@
if (tty_paranoia_check(tty, inode, __func__))
return 0;
- tty_lock();
+ tty_lock(tty);
check_tty_count(tty, __func__);
__tty_fasync(-1, filp, 0);
@@ -1636,10 +1642,11 @@
pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER);
devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0;
+ /* Review: parallel close */
o_tty = tty->link;
if (tty_release_checks(tty, o_tty, idx)) {
- tty_unlock();
+ tty_unlock(tty);
return 0;
}
@@ -1651,7 +1658,7 @@
if (tty->ops->close)
tty->ops->close(tty, filp);
- tty_unlock();
+ tty_unlock(tty);
/*
* Sanity check: if tty->count is going to zero, there shouldn't be
* any waiters on tty->read_wait or tty->write_wait. We test the
@@ -1674,7 +1681,7 @@
opens on /dev/tty */
mutex_lock(&tty_mutex);
- tty_lock();
+ tty_lock_pair(tty, o_tty);
tty_closing = tty->count <= 1;
o_tty_closing = o_tty &&
(o_tty->count <= (pty_master ? 1 : 0));
@@ -1705,7 +1712,7 @@
printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
__func__, tty_name(tty, buf));
- tty_unlock();
+ tty_unlock_pair(tty, o_tty);
mutex_unlock(&tty_mutex);
schedule();
}
@@ -1768,7 +1775,7 @@
/* check whether both sides are closing ... */
if (!tty_closing || (o_tty && !o_tty_closing)) {
- tty_unlock();
+ tty_unlock_pair(tty, o_tty);
return 0;
}
@@ -1781,14 +1788,16 @@
tty_ldisc_release(tty, o_tty);
/*
* The release_tty function takes care of the details of clearing
- * the slots and preserving the termios structure.
+ * the slots and preserving the termios structure. The tty_unlock_pair
+ * should be safe as we keep a kref while the tty is locked (so the
+ * unlock never unlocks a freed tty).
*/
release_tty(tty, idx);
+ tty_unlock_pair(tty, o_tty);
/* Make this pty number available for reallocation */
if (devpts)
devpts_kill_index(inode, idx);
- tty_unlock();
return 0;
}
@@ -1800,6 +1809,9 @@
*
* We cannot return driver and index like for the other nodes because
* devpts will not work then. It expects inodes to be from devpts FS.
+ *
+ * We need to move to returning a refcounted object from all the lookup
+ * paths including this one.
*/
static struct tty_struct *tty_open_current_tty(dev_t device, struct file *filp)
{
@@ -1816,6 +1828,7 @@
/* noctty = 1; */
tty_kref_put(tty);
/* FIXME: we put a reference and return a TTY! */
+ /* This is only safe because the caller holds tty_mutex */
return tty;
}
@@ -1888,6 +1901,9 @@
* Locking: tty_mutex protects tty, tty_lookup_driver and tty_init_dev.
* tty->count should protect the rest.
* ->siglock protects ->signal/->sighand
+ *
+ * Note: the tty_unlock/lock cases without a ref are only safe due to
+ * tty_mutex
*/
static int tty_open(struct inode *inode, struct file *filp)
@@ -1911,8 +1927,7 @@
retval = 0;
mutex_lock(&tty_mutex);
- tty_lock();
-
+ /* This is protected by the tty_mutex */
tty = tty_open_current_tty(device, filp);
if (IS_ERR(tty)) {
retval = PTR_ERR(tty);
@@ -1933,17 +1948,19 @@
}
if (tty) {
+ tty_lock(tty);
retval = tty_reopen(tty);
- if (retval)
+ if (retval < 0) {
+ tty_unlock(tty);
tty = ERR_PTR(retval);
- } else
+ }
+ } else /* Returns with the tty_lock held for now */
tty = tty_init_dev(driver, index);
mutex_unlock(&tty_mutex);
if (driver)
tty_driver_kref_put(driver);
if (IS_ERR(tty)) {
- tty_unlock();
retval = PTR_ERR(tty);
goto err_file;
}
@@ -1972,7 +1989,7 @@
printk(KERN_DEBUG "%s: error %d in opening %s...\n", __func__,
retval, tty->name);
#endif
- tty_unlock(); /* need to call tty_release without BTM */
+ tty_unlock(tty); /* need to call tty_release without BTM */
tty_release(inode, filp);
if (retval != -ERESTARTSYS)
return retval;
@@ -1984,17 +2001,15 @@
/*
* Need to reset f_op in case a hangup happened.
*/
- tty_lock();
if (filp->f_op == &hung_up_tty_fops)
filp->f_op = &tty_fops;
- tty_unlock();
goto retry_open;
}
- tty_unlock();
+ tty_unlock(tty);
mutex_lock(&tty_mutex);
- tty_lock();
+ tty_lock(tty);
spin_lock_irq(¤t->sighand->siglock);
if (!noctty &&
current->signal->leader &&
@@ -2002,11 +2017,10 @@
tty->session == NULL)
__proc_set_tty(current, tty);
spin_unlock_irq(¤t->sighand->siglock);
- tty_unlock();
+ tty_unlock(tty);
mutex_unlock(&tty_mutex);
return 0;
err_unlock:
- tty_unlock();
mutex_unlock(&tty_mutex);
/* after locks to avoid deadlock */
if (!IS_ERR_OR_NULL(driver))
@@ -2089,10 +2103,13 @@
static int tty_fasync(int fd, struct file *filp, int on)
{
+ struct tty_struct *tty = file_tty(filp);
int retval;
- tty_lock();
+
+ tty_lock(tty);
retval = __tty_fasync(fd, filp, on);
- tty_unlock();
+ tty_unlock(tty);
+
return retval;
}
@@ -2929,6 +2946,7 @@
tty->pgrp = NULL;
tty->overrun_time = jiffies;
tty_buffer_init(tty);
+ mutex_init(&tty->legacy_mutex);
mutex_init(&tty->termios_mutex);
mutex_init(&tty->ldisc_mutex);
init_waitqueue_head(&tty->write_wait);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 24b95db..173a900 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -28,7 +28,6 @@
static DEFINE_SPINLOCK(tty_ldisc_lock);
static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
-static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_idle);
/* Line disc dispatch table */
static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
@@ -65,7 +64,7 @@
return;
}
local_irq_restore(flags);
- wake_up(&tty_ldisc_idle);
+ wake_up(&ld->wq_idle);
}
/**
@@ -200,6 +199,8 @@
ld->ops = ldops;
atomic_set(&ld->users, 1);
+ init_waitqueue_head(&ld->wq_idle);
+
return ld;
}
@@ -538,7 +539,7 @@
static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout)
{
long ret;
- ret = wait_event_timeout(tty_ldisc_idle,
+ ret = wait_event_timeout(tty->ldisc->wq_idle,
atomic_read(&tty->ldisc->users) == 1, timeout);
return ret > 0 ? 0 : -EBUSY;
}
@@ -567,7 +568,7 @@
if (IS_ERR(new_ldisc))
return PTR_ERR(new_ldisc);
- tty_lock();
+ tty_lock(tty);
/*
* We need to look at the tty locking here for pty/tty pairs
* when both sides try to change in parallel.
@@ -581,12 +582,12 @@
*/
if (tty->ldisc->ops->num == ldisc) {
- tty_unlock();
+ tty_unlock(tty);
tty_ldisc_put(new_ldisc);
return 0;
}
- tty_unlock();
+ tty_unlock(tty);
/*
* Problem: What do we do if this blocks ?
* We could deadlock here
@@ -594,7 +595,7 @@
tty_wait_until_sent(tty, 0);
- tty_lock();
+ tty_lock(tty);
mutex_lock(&tty->ldisc_mutex);
/*
@@ -604,10 +605,10 @@
while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
mutex_unlock(&tty->ldisc_mutex);
- tty_unlock();
+ tty_unlock(tty);
wait_event(tty_ldisc_wait,
test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);
- tty_lock();
+ tty_lock(tty);
mutex_lock(&tty->ldisc_mutex);
}
@@ -622,7 +623,7 @@
o_ldisc = tty->ldisc;
- tty_unlock();
+ tty_unlock(tty);
/*
* Make sure we don't change while someone holds a
* reference to the line discipline. The TTY_LDISC bit
@@ -649,7 +650,7 @@
retval = tty_ldisc_wait_idle(tty, 5 * HZ);
- tty_lock();
+ tty_lock(tty);
mutex_lock(&tty->ldisc_mutex);
/* handle wait idle failure locked */
@@ -664,7 +665,7 @@
clear_bit(TTY_LDISC_CHANGING, &tty->flags);
mutex_unlock(&tty->ldisc_mutex);
tty_ldisc_put(new_ldisc);
- tty_unlock();
+ tty_unlock(tty);
return -EIO;
}
@@ -707,7 +708,7 @@
if (o_work)
schedule_work(&o_tty->buf.work);
mutex_unlock(&tty->ldisc_mutex);
- tty_unlock();
+ tty_unlock(tty);
return retval;
}
@@ -815,11 +816,11 @@
* need to wait for another function taking the BTM
*/
clear_bit(TTY_LDISC, &tty->flags);
- tty_unlock();
+ tty_unlock(tty);
cancel_work_sync(&tty->buf.work);
mutex_unlock(&tty->ldisc_mutex);
retry:
- tty_lock();
+ tty_lock(tty);
mutex_lock(&tty->ldisc_mutex);
/* At this point we have a closed ldisc and we want to
@@ -830,7 +831,7 @@
if (atomic_read(&tty->ldisc->users) != 1) {
char cur_n[TASK_COMM_LEN], tty_n[64];
long timeout = 3 * HZ;
- tty_unlock();
+ tty_unlock(tty);
while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
timeout = MAX_SCHEDULE_TIMEOUT;
@@ -911,10 +912,10 @@
* race with the set_ldisc code path.
*/
- tty_unlock();
+ tty_unlock(tty);
tty_ldisc_halt(tty);
tty_ldisc_flush_works(tty);
- tty_lock();
+ tty_lock(tty);
mutex_lock(&tty->ldisc_mutex);
/*
diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c
index 9ff986c..69adc80 100644
--- a/drivers/tty/tty_mutex.c
+++ b/drivers/tty/tty_mutex.c
@@ -4,29 +4,59 @@
#include <linux/semaphore.h>
#include <linux/sched.h>
-/*
- * The 'big tty mutex'
- *
- * This mutex is taken and released by tty_lock() and tty_unlock(),
- * replacing the older big kernel lock.
- * It can no longer be taken recursively, and does not get
- * released implicitly while sleeping.
- *
- * Don't use in new code.
- */
-static DEFINE_MUTEX(big_tty_mutex);
+/* Legacy tty mutex glue */
/*
* Getting the big tty mutex.
*/
-void __lockfunc tty_lock(void)
+
+void __lockfunc tty_lock(struct tty_struct *tty)
{
- mutex_lock(&big_tty_mutex);
+ if (tty->magic != TTY_MAGIC) {
+ printk(KERN_ERR "L Bad %p\n", tty);
+ WARN_ON(1);
+ return;
+ }
+ tty_kref_get(tty);
+ mutex_lock(&tty->legacy_mutex);
}
EXPORT_SYMBOL(tty_lock);
-void __lockfunc tty_unlock(void)
+void __lockfunc tty_unlock(struct tty_struct *tty)
{
- mutex_unlock(&big_tty_mutex);
+ if (tty->magic != TTY_MAGIC) {
+ printk(KERN_ERR "U Bad %p\n", tty);
+ WARN_ON(1);
+ return;
+ }
+ mutex_unlock(&tty->legacy_mutex);
+ tty_kref_put(tty);
}
EXPORT_SYMBOL(tty_unlock);
+
+/*
+ * Getting the big tty mutex for a pair of ttys with lock ordering
+ * On a non pty/tty pair tty2 can be NULL which is just fine.
+ */
+void __lockfunc tty_lock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2)
+{
+ if (tty < tty2) {
+ tty_lock(tty);
+ tty_lock(tty2);
+ } else {
+ if (tty2 && tty2 != tty)
+ tty_lock(tty2);
+ tty_lock(tty);
+ }
+}
+EXPORT_SYMBOL(tty_lock_pair);
+
+void __lockfunc tty_unlock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2)
+{
+ tty_unlock(tty);
+ if (tty2 && tty2 != tty)
+ tty_unlock(tty2);
+}
+EXPORT_SYMBOL(tty_unlock_pair);
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index bf6e238..d9cca95 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -230,7 +230,7 @@
/* block if port is in the process of being closed */
if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
- wait_event_interruptible_tty(port->close_wait,
+ wait_event_interruptible_tty(tty, port->close_wait,
!(port->flags & ASYNC_CLOSING));
if (port->flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
@@ -296,9 +296,9 @@
retval = -ERESTARTSYS;
break;
}
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
finish_wait(&port->open_wait, &wait);
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 8308fc7..2aaa0c2 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/tty.h>
#include <asm/uaccess.h>
+#include <linux/console.h>
#include <linux/consolemap.h>
#include <linux/vt_kern.h>
@@ -312,6 +313,7 @@
if (!access_ok(VERIFY_READ, arg, E_TABSZ))
return -EFAULT;
+ console_lock();
for (i=0; i<E_TABSZ ; i++) {
unsigned char uc;
__get_user(uc, arg+i);
@@ -319,6 +321,7 @@
}
update_user_maps();
+ console_unlock();
return 0;
}
@@ -330,11 +333,13 @@
if (!access_ok(VERIFY_WRITE, arg, E_TABSZ))
return -EFAULT;
+ console_lock();
for (i=0; i<E_TABSZ ; i++)
- {
- ch = conv_uni_to_pc(vc_cons[fg_console].d, p[i]);
- __put_user((ch & ~0xff) ? 0 : ch, arg+i);
- }
+ {
+ ch = conv_uni_to_pc(vc_cons[fg_console].d, p[i]);
+ __put_user((ch & ~0xff) ? 0 : ch, arg+i);
+ }
+ console_unlock();
return 0;
}
@@ -346,6 +351,7 @@
if (!access_ok(VERIFY_READ, arg, E_TABSZ*sizeof(unsigned short)))
return -EFAULT;
+ console_lock();
for (i=0; i<E_TABSZ ; i++) {
unsigned short us;
__get_user(us, arg+i);
@@ -353,6 +359,7 @@
}
update_user_maps();
+ console_unlock();
return 0;
}
@@ -364,8 +371,10 @@
if (!access_ok(VERIFY_WRITE, arg, E_TABSZ*sizeof(unsigned short)))
return -EFAULT;
+ console_lock();
for (i=0; i<E_TABSZ ; i++)
__put_user(p[i], arg+i);
+ console_unlock();
return 0;
}
@@ -407,6 +416,7 @@
}
}
+/* Caller must hold the console lock */
void con_free_unimap(struct vc_data *vc)
{
struct uni_pagedir *p;
@@ -487,17 +497,21 @@
return 0;
}
-/* ui is a leftover from using a hashtable, but might be used again */
-int con_clear_unimap(struct vc_data *vc, struct unimapinit *ui)
+/* ui is a leftover from using a hashtable, but might be used again
+ Caller must hold the lock */
+static int con_do_clear_unimap(struct vc_data *vc, struct unimapinit *ui)
{
struct uni_pagedir *p, *q;
-
+
p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
- if (p && p->readonly) return -EIO;
+ if (p && p->readonly)
+ return -EIO;
+
if (!p || --p->refcount) {
q = kzalloc(sizeof(*p), GFP_KERNEL);
if (!q) {
- if (p) p->refcount++;
+ if (p)
+ p->refcount++;
return -ENOMEM;
}
q->refcount=1;
@@ -511,23 +525,43 @@
return 0;
}
+int con_clear_unimap(struct vc_data *vc, struct unimapinit *ui)
+{
+ int ret;
+ console_lock();
+ ret = con_do_clear_unimap(vc, ui);
+ console_unlock();
+ return ret;
+}
+
int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
{
int err = 0, err1, i;
struct uni_pagedir *p, *q;
+ console_lock();
+
/* Save original vc_unipagdir_loc in case we allocate a new one */
p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
- if (p->readonly) return -EIO;
+ if (p->readonly) {
+ console_unlock();
+ return -EIO;
+ }
- if (!ct) return 0;
+ if (!ct) {
+ console_unlock();
+ return 0;
+ }
if (p->refcount > 1) {
int j, k;
u16 **p1, *p2, l;
- err1 = con_clear_unimap(vc, NULL);
- if (err1) return err1;
+ err1 = con_do_clear_unimap(vc, NULL);
+ if (err1) {
+ console_unlock();
+ return err1;
+ }
/*
* Since refcount was > 1, con_clear_unimap() allocated a
@@ -558,7 +592,8 @@
*vc->vc_uni_pagedir_loc = (unsigned long)p;
con_release_unimap(q);
kfree(q);
- return err1;
+ console_unlock();
+ return err1;
}
}
} else {
@@ -592,21 +627,30 @@
/*
* Merge with fontmaps of any other virtual consoles.
*/
- if (con_unify_unimap(vc, p))
+ if (con_unify_unimap(vc, p)) {
+ console_unlock();
return err;
+ }
for (i = 0; i <= 3; i++)
set_inverse_transl(vc, p, i); /* Update inverse translations */
set_inverse_trans_unicode(vc, p);
-
+
+ console_unlock();
return err;
}
-/* Loads the unimap for the hardware font, as defined in uni_hash.tbl.
- The representation used was the most compact I could come up
- with. This routine is executed at sys_setup time, and when the
- PIO_FONTRESET ioctl is called. */
-
+/**
+ * con_set_default_unimap - set default unicode map
+ * @vc: the console we are updating
+ *
+ * Loads the unimap for the hardware font, as defined in uni_hash.tbl.
+ * The representation used was the most compact I could come up
+ * with. This routine is executed at video setup, and when the
+ * PIO_FONTRESET ioctl is called.
+ *
+ * The caller must hold the console lock
+ */
int con_set_default_unimap(struct vc_data *vc)
{
int i, j, err = 0, err1;
@@ -617,6 +661,7 @@
p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
if (p == dflt)
return 0;
+
dflt->refcount++;
*vc->vc_uni_pagedir_loc = (unsigned long)dflt;
if (p && !--p->refcount) {
@@ -628,8 +673,9 @@
/* The default font is always 256 characters */
- err = con_clear_unimap(vc, NULL);
- if (err) return err;
+ err = con_do_clear_unimap(vc, NULL);
+ if (err)
+ return err;
p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
q = dfont_unitable;
@@ -654,6 +700,13 @@
}
EXPORT_SYMBOL(con_set_default_unimap);
+/**
+ * con_copy_unimap - copy unimap between two vts
+ * @dst_vc: target
+ * @src_vt: source
+ *
+ * The caller must hold the console lock when invoking this method
+ */
int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc)
{
struct uni_pagedir *q;
@@ -668,13 +721,23 @@
*dst_vc->vc_uni_pagedir_loc = (long)q;
return 0;
}
+EXPORT_SYMBOL(con_copy_unimap);
+/**
+ * con_get_unimap - get the unicode map
+ * @vc: the console to read from
+ *
+ * Read the console unicode data for this console. Called from the ioctl
+ * handlers.
+ */
int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct unipair __user *list)
{
int i, j, k, ect;
u16 **p1, *p2;
struct uni_pagedir *p;
+ console_lock();
+
ect = 0;
if (*vc->vc_uni_pagedir_loc) {
p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
@@ -694,22 +757,19 @@
}
}
__put_user(ect, uct);
+ console_unlock();
return ((ect <= ct) ? 0 : -ENOMEM);
}
-void con_protect_unimap(struct vc_data *vc, int rdonly)
-{
- struct uni_pagedir *p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
-
- if (p)
- p->readonly = rdonly;
-}
-
/*
* Always use USER_MAP. These functions are used by the keyboard,
* which shouldn't be affected by G0/G1 switching, etc.
* If the user map still contains default values, i.e. the
* direct-to-font mapping, then assume user is using Latin1.
+ *
+ * FIXME: at some point we need to decide if we want to lock the table
+ * update element itself via the keyboard_event_lock for consistency with the
+ * keyboard driver as well as the consoles
*/
/* may be called during an interrupt */
u32 conv_8bit_to_uni(unsigned char c)
@@ -777,4 +837,3 @@
con_set_default_unimap(vc_cons[i].d);
}
-EXPORT_SYMBOL(con_copy_unimap);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 2156188..84cbf29 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3892,36 +3892,6 @@
vc->vc_sw->con_set_palette(vc, color_table);
}
-static int set_get_cmap(unsigned char __user *arg, int set)
-{
- int i, j, k;
-
- WARN_CONSOLE_UNLOCKED();
-
- for (i = 0; i < 16; i++)
- if (set) {
- get_user(default_red[i], arg++);
- get_user(default_grn[i], arg++);
- get_user(default_blu[i], arg++);
- } else {
- put_user(default_red[i], arg++);
- put_user(default_grn[i], arg++);
- put_user(default_blu[i], arg++);
- }
- if (set) {
- for (i = 0; i < MAX_NR_CONSOLES; i++)
- if (vc_cons_allocated(i)) {
- for (j = k = 0; j < 16; j++) {
- vc_cons[i].d->vc_palette[k++] = default_red[j];
- vc_cons[i].d->vc_palette[k++] = default_grn[j];
- vc_cons[i].d->vc_palette[k++] = default_blu[j];
- }
- set_palette(vc_cons[i].d);
- }
- }
- return 0;
-}
-
/*
* Load palette into the DAC registers. arg points to a colour
* map, 3 bytes per colour, 16 colours, range from 0 to 255.
@@ -3929,24 +3899,50 @@
int con_set_cmap(unsigned char __user *arg)
{
- int rc;
+ int i, j, k;
+ unsigned char colormap[3*16];
+
+ if (copy_from_user(colormap, arg, sizeof(colormap)))
+ return -EFAULT;
console_lock();
- rc = set_get_cmap (arg,1);
+ for (i = k = 0; i < 16; i++) {
+ default_red[i] = colormap[k++];
+ default_grn[i] = colormap[k++];
+ default_blu[i] = colormap[k++];
+ }
+ for (i = 0; i < MAX_NR_CONSOLES; i++) {
+ if (!vc_cons_allocated(i))
+ continue;
+ for (j = k = 0; j < 16; j++) {
+ vc_cons[i].d->vc_palette[k++] = default_red[j];
+ vc_cons[i].d->vc_palette[k++] = default_grn[j];
+ vc_cons[i].d->vc_palette[k++] = default_blu[j];
+ }
+ set_palette(vc_cons[i].d);
+ }
console_unlock();
- return rc;
+ return 0;
}
int con_get_cmap(unsigned char __user *arg)
{
- int rc;
+ int i, k;
+ unsigned char colormap[3*16];
console_lock();
- rc = set_get_cmap (arg,0);
+ for (i = k = 0; i < 16; i++) {
+ colormap[k++] = default_red[i];
+ colormap[k++] = default_grn[i];
+ colormap[k++] = default_blu[i];
+ }
console_unlock();
- return rc;
+ if (copy_to_user(arg, colormap, sizeof(colormap)))
+ return -EFAULT;
+
+ return 0;
}
void reset_palette(struct vc_data *vc)
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index ede2ef1..6461854 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -910,7 +910,9 @@
ret = con_font_op(vc_cons[fg_console].d, &op);
if (ret)
break;
+ console_lock();
con_set_default_unimap(vc_cons[fg_console].d);
+ console_unlock();
break;
}
#endif
@@ -934,33 +936,23 @@
case PIO_SCRNMAP:
if (!perm)
ret = -EPERM;
- else {
- tty_lock();
+ else
ret = con_set_trans_old(up);
- tty_unlock();
- }
break;
case GIO_SCRNMAP:
- tty_lock();
ret = con_get_trans_old(up);
- tty_unlock();
break;
case PIO_UNISCRNMAP:
if (!perm)
ret = -EPERM;
- else {
- tty_lock();
+ else
ret = con_set_trans_new(up);
- tty_unlock();
- }
break;
case GIO_UNISCRNMAP:
- tty_lock();
ret = con_get_trans_new(up);
- tty_unlock();
break;
case PIO_UNIMAPCLR:
@@ -970,19 +962,14 @@
ret = copy_from_user(&ui, up, sizeof(struct unimapinit));
if (ret)
ret = -EFAULT;
- else {
- tty_lock();
+ else
con_clear_unimap(vc, &ui);
- tty_unlock();
- }
break;
}
case PIO_UNIMAP:
case GIO_UNIMAP:
- tty_lock();
ret = do_unimap_ioctl(cmd, up, perm, vc);
- tty_unlock();
break;
case VT_LOCKSWITCH:
@@ -1196,9 +1183,7 @@
case PIO_UNIMAP:
case GIO_UNIMAP:
- tty_lock();
ret = compat_unimap_ioctl(cmd, up, perm, vc);
- tty_unlock();
break;
/*
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 380a87f..15a42c8 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -94,17 +94,14 @@
* (and thus for each /dev/ node).
*/
struct gs_port {
+ struct tty_port port;
spinlock_t port_lock; /* guard port_* access */
struct gserial *port_usb;
- struct tty_struct *port_tty;
- unsigned open_count;
bool openclose; /* open/close in progress */
u8 port_num;
- wait_queue_head_t close_wait; /* wait for last close */
-
struct list_head read_pool;
int read_started;
int read_allocated;
@@ -412,8 +409,8 @@
break;
}
- if (do_tty_wake && port->port_tty)
- tty_wakeup(port->port_tty);
+ if (do_tty_wake && port->port.tty)
+ tty_wakeup(port->port.tty);
return status;
}
@@ -435,7 +432,7 @@
struct tty_struct *tty;
/* no more rx if closed */
- tty = port->port_tty;
+ tty = port->port.tty;
if (!tty)
break;
@@ -488,7 +485,7 @@
/* hand any queued data to the tty */
spin_lock_irq(&port->port_lock);
- tty = port->port_tty;
+ tty = port->port.tty;
while (!list_empty(queue)) {
struct usb_request *req;
@@ -699,7 +696,7 @@
/* unblock any pending writes into our circular buffer */
if (started) {
- tty_wakeup(port->port_tty);
+ tty_wakeup(port->port.tty);
} else {
gs_free_requests(ep, head, &port->read_allocated);
gs_free_requests(port->port_usb->in, &port->write_pool,
@@ -734,9 +731,9 @@
spin_lock_irq(&port->port_lock);
/* already open? Great. */
- if (port->open_count) {
+ if (port->port.count) {
status = 0;
- port->open_count++;
+ port->port.count++;
/* currently opening/closing? wait ... */
} else if (port->openclose) {
@@ -793,9 +790,9 @@
/* REVISIT maybe wait for "carrier detect" */
tty->driver_data = port;
- port->port_tty = tty;
+ port->port.tty = tty;
- port->open_count = 1;
+ port->port.count = 1;
port->openclose = false;
/* if connected, start the I/O stream */
@@ -837,11 +834,11 @@
spin_lock_irq(&port->port_lock);
- if (port->open_count != 1) {
- if (port->open_count == 0)
+ if (port->port.count != 1) {
+ if (port->port.count == 0)
WARN_ON(1);
else
- --port->open_count;
+ --port->port.count;
goto exit;
}
@@ -851,7 +848,7 @@
* and sleep if necessary
*/
port->openclose = true;
- port->open_count = 0;
+ port->port.count = 0;
gser = port->port_usb;
if (gser && gser->disconnect)
@@ -879,14 +876,14 @@
gs_buf_clear(&port->port_write_buf);
tty->driver_data = NULL;
- port->port_tty = NULL;
+ port->port.tty = NULL;
port->openclose = false;
pr_debug("gs_close: ttyGS%d (%p,%p) done!\n",
port->port_num, tty, file);
- wake_up_interruptible(&port->close_wait);
+ wake_up_interruptible(&port->port.close_wait);
exit:
spin_unlock_irq(&port->port_lock);
}
@@ -1034,8 +1031,8 @@
if (port == NULL)
return -ENOMEM;
+ tty_port_init(&port->port);
spin_lock_init(&port->port_lock);
- init_waitqueue_head(&port->close_wait);
init_waitqueue_head(&port->drain_wait);
tasklet_init(&port->push, gs_rx_push, (unsigned long) port);
@@ -1155,7 +1152,7 @@
int cond;
spin_lock_irq(&port->port_lock);
- cond = (port->open_count == 0) && !port->openclose;
+ cond = (port->port.count == 0) && !port->openclose;
spin_unlock_irq(&port->port_lock);
return cond;
}
@@ -1194,7 +1191,7 @@
tasklet_kill(&port->push);
/* wait for old opens to finish */
- wait_event(port->close_wait, gs_closed(port));
+ wait_event(port->port.close_wait, gs_closed(port));
WARN_ON(port->port_usb != NULL);
@@ -1268,7 +1265,7 @@
/* if it's already open, start I/O ... and notify the serial
* protocol about open/close status (connect/disconnect).
*/
- if (port->open_count) {
+ if (port->port.count) {
pr_debug("gserial_connect: start ttyGS%d\n", port->port_num);
gs_start_io(port);
if (gser->connect)
@@ -1315,10 +1312,10 @@
port->port_usb = NULL;
gser->ioport = NULL;
- if (port->open_count > 0 || port->openclose) {
+ if (port->port.count > 0 || port->openclose) {
wake_up_interruptible(&port->drain_wait);
- if (port->port_tty)
- tty_hangup(port->port_tty);
+ if (port->port.tty)
+ tty_hangup(port->port.tty);
}
spin_unlock_irqrestore(&port->port_lock, flags);
@@ -1331,7 +1328,7 @@
/* finally, free any unused/unusable I/O buffers */
spin_lock_irqsave(&port->port_lock, flags);
- if (port->open_count == 0 && !port->openclose)
+ if (port->port.count == 0 && !port->openclose)
gs_buf_free(&port->port_write_buf);
gs_free_requests(gser->out, &port->read_pool, NULL);
gs_free_requests(gser->out, &port->read_queue, NULL);
diff --git a/include/linux/generic_serial.h b/include/linux/generic_serial.h
index fadff28..79b3eb3 100644
--- a/include/linux/generic_serial.h
+++ b/include/linux/generic_serial.h
@@ -4,7 +4,6 @@
* Copyright (C) 1998 R.E.Wolff@BitWizard.nl
*
* written for the SX serial driver.
- * Contains the code that should be shared over all the serial drivers.
*
* Version 0.1 -- December, 1998.
*/
@@ -12,45 +11,8 @@
#ifndef GENERIC_SERIAL_H
#define GENERIC_SERIAL_H
-#ifdef __KERNEL__
-#include <linux/mutex.h>
-#include <linux/tty.h>
-
-struct real_driver {
- void (*disable_tx_interrupts) (void *);
- void (*enable_tx_interrupts) (void *);
- void (*disable_rx_interrupts) (void *);
- void (*enable_rx_interrupts) (void *);
- void (*shutdown_port) (void*);
- int (*set_real_termios) (void*);
- int (*chars_in_buffer) (void*);
- void (*close) (void*);
- void (*hungup) (void*);
- void (*getserial) (void*, struct serial_struct *sp);
-};
-
-
-
-struct gs_port {
- int magic;
- struct tty_port port;
- unsigned char *xmit_buf;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
- struct mutex port_write_mutex;
- unsigned long event;
- unsigned short closing_wait;
- int close_delay;
- struct real_driver *rd;
- int wakeup_chars;
- int baud_base;
- int baud;
- int custom_divisor;
- spinlock_t driver_lock;
-};
-
-#endif /* __KERNEL__ */
+#warning Use of this header is deprecated.
+#warning Since nobody sets the constants defined here for you, you should not, in any case, use them. Including the header is thus pointless.
/* Flags */
/* Warning: serial.h defines some ASYNC_ flags, they say they are "only"
@@ -60,8 +22,6 @@
#define GS_RX_INTEN 0x00400000
#define GS_ACTIVE 0x00200000
-
-
#define GS_TYPE_NORMAL 1
#define GS_DEBUG_FLUSH 0x00000001
@@ -72,24 +32,4 @@
#define GS_DEBUG_FLOW 0x00000020
#define GS_DEBUG_WRITE 0x00000040
-#ifdef __KERNEL__
-int gs_put_char(struct tty_struct *tty, unsigned char ch);
-int gs_write(struct tty_struct *tty,
- const unsigned char *buf, int count);
-int gs_write_room(struct tty_struct *tty);
-int gs_chars_in_buffer(struct tty_struct *tty);
-void gs_flush_buffer(struct tty_struct *tty);
-void gs_flush_chars(struct tty_struct *tty);
-void gs_stop(struct tty_struct *tty);
-void gs_start(struct tty_struct *tty);
-void gs_hangup(struct tty_struct *tty);
-int gs_block_til_ready(void *port, struct file *filp);
-void gs_close(struct tty_struct *tty, struct file *filp);
-void gs_set_termios (struct tty_struct * tty,
- struct ktermios * old_termios);
-int gs_init_port(struct gs_port *port);
-int gs_setserial(struct gs_port *port, struct serial_struct __user *sp);
-int gs_getserial(struct gs_port *port, struct serial_struct __user *sp);
-void gs_got_break(struct gs_port *port);
-#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/isdn.h b/include/linux/isdn.h
index 292f27a..215c416 100644
--- a/include/linux/isdn.h
+++ b/include/linux/isdn.h
@@ -15,6 +15,7 @@
#define __ISDN_H__
#include <linux/ioctl.h>
+#include <linux/tty.h>
#define ISDN_MAX_DRIVERS 32
#define ISDN_MAX_CHANNELS 64
@@ -392,21 +393,8 @@
/*======================= Start of ISDN-tty stuff ===========================*/
#define ISDN_ASYNC_MAGIC 0x49344C01 /* for paranoia-checking */
-#define ISDN_ASYNC_INITIALIZED 0x80000000 /* port was initialized */
-#define ISDN_ASYNC_CALLOUT_ACTIVE 0x40000000 /* Call out device active */
-#define ISDN_ASYNC_NORMAL_ACTIVE 0x20000000 /* Normal device active */
-#define ISDN_ASYNC_CLOSING 0x08000000 /* Serial port is closing */
-#define ISDN_ASYNC_CTS_FLOW 0x04000000 /* Do CTS flow control */
-#define ISDN_ASYNC_CHECK_CD 0x02000000 /* i.e., CLOCAL */
-#define ISDN_ASYNC_HUP_NOTIFY 0x0001 /* Notify tty on hangups/closes */
-#define ISDN_ASYNC_SESSION_LOCKOUT 0x0100 /* Lock cua opens on session */
-#define ISDN_ASYNC_PGRP_LOCKOUT 0x0200 /* Lock cua opens on pgrp */
-#define ISDN_ASYNC_CALLOUT_NOHUP 0x0400 /* No hangup for cui */
-#define ISDN_ASYNC_SPLIT_TERMIOS 0x0008 /* Sep. termios for dialin/out */
#define ISDN_SERIAL_XMIT_SIZE 1024 /* Default bufsize for write */
#define ISDN_SERIAL_XMIT_MAX 4000 /* Maximum bufsize for write */
-#define ISDN_SERIAL_TYPE_NORMAL 1
-#define ISDN_SERIAL_TYPE_CALLOUT 2
#ifdef CONFIG_ISDN_AUDIO
/* For using sk_buffs with audio we need some private variables
@@ -448,17 +436,12 @@
/* Private data (similar to async_struct in <linux/serial.h>) */
typedef struct modem_info {
int magic;
- struct module *owner;
- int flags; /* defined in tty.h */
+ struct tty_port port;
int x_char; /* xon/xoff character */
int mcr; /* Modem control register */
int msr; /* Modem status register */
int lsr; /* Line status register */
int line;
- int count; /* # of fd on device */
- int blocked_open; /* # of blocked opens */
- long session; /* Session of opening process */
- long pgrp; /* pgrp of opening process */
int online; /* 1 = B-Channel is up, drop data */
/* 2 = B-Channel is up, deliver d.*/
int dialing; /* Dial in progress or ATA */
@@ -478,7 +461,6 @@
int send_outstanding;/* # of outstanding send-requests */
int xmit_size; /* max. # of chars in xmit_buf */
int xmit_count; /* # of chars in xmit_buf */
- unsigned char *xmit_buf; /* transmit buffer */
struct sk_buff_head xmit_queue; /* transmit queue */
atomic_t xmit_lock; /* Semaphore for isdn_tty_write */
#ifdef CONFIG_ISDN_AUDIO
@@ -496,11 +478,7 @@
struct T30_s *fax; /* T30 Fax Group 3 data/interface */
int faxonline; /* Fax-channel status */
#endif
- struct tty_struct *tty; /* Pointer to corresponding tty */
atemu emu; /* AT-emulator data */
- struct ktermios normal_termios; /* For saving termios structs */
- struct ktermios callout_termios;
- wait_queue_head_t open_wait, close_wait;
spinlock_t readlock;
} modem_info;
diff --git a/include/linux/of_serial.h b/include/linux/of_serial.h
new file mode 100644
index 0000000..4a73ed8
--- /dev/null
+++ b/include/linux/of_serial.h
@@ -0,0 +1,17 @@
+#ifndef __LINUX_OF_SERIAL_H
+#define __LINUX_OF_SERIAL_H
+
+/*
+ * FIXME remove this file when tegra finishes conversion to open firmware,
+ * expectation is that all quirks will then be self-contained in
+ * drivers/tty/serial/of_serial.c.
+ */
+#ifdef CONFIG_ARCH_TEGRA
+extern void tegra_serial_handle_break(struct uart_port *port);
+#else
+static inline void tegra_serial_handle_break(struct uart_port *port)
+{
+}
+#endif
+
+#endif /* __LINUX_OF_SERIAL */
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 8f012f8..10dbce5 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -38,6 +38,7 @@
int (*handle_irq)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned old);
+ void (*handle_break)(struct uart_port *);
};
/*
@@ -68,6 +69,7 @@
struct uart_port;
struct uart_8250_port;
+int serial8250_register_8250_port(struct uart_8250_port *);
int serial8250_register_port(struct uart_port *);
void serial8250_unregister_port(int line);
void serial8250_suspend_port(int line);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 2db407a..65db992 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -310,6 +310,7 @@
int (*handle_irq)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int old);
+ void (*handle_break)(struct uart_port *);
unsigned int irq; /* irq number */
unsigned long irqflags; /* irq flags */
unsigned int uartclk; /* base uart clock */
@@ -533,6 +534,10 @@
static inline int uart_handle_break(struct uart_port *port)
{
struct uart_state *state = port->state;
+
+ if (port->handle_break)
+ port->handle_break(port);
+
#ifdef SUPPORT_SYSRQ
if (port->cons && port->cons->index == port->line) {
if (!port->sysrq) {
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 9f47ab5..4990ef2 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -268,6 +268,7 @@
struct mutex ldisc_mutex;
struct tty_ldisc *ldisc;
+ struct mutex legacy_mutex;
struct mutex termios_mutex;
spinlock_t ctrl_lock;
/* Termios values are protected by the termios mutex */
@@ -605,8 +606,12 @@
/* tty_mutex.c */
/* functions for preparation of BKL removal */
-extern void __lockfunc tty_lock(void) __acquires(tty_lock);
-extern void __lockfunc tty_unlock(void) __releases(tty_lock);
+extern void __lockfunc tty_lock(struct tty_struct *tty);
+extern void __lockfunc tty_unlock(struct tty_struct *tty);
+extern void __lockfunc tty_lock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2);
+extern void __lockfunc tty_unlock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2);
/*
* this shall be called only from where BTM is held (like close)
@@ -621,9 +626,9 @@
static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
long timeout)
{
- tty_unlock(); /* tty->ops->close holds the BTM, drop it while waiting */
+ tty_unlock(tty); /* tty->ops->close holds the BTM, drop it while waiting */
tty_wait_until_sent(tty, timeout);
- tty_lock();
+ tty_lock(tty);
}
/*
@@ -638,16 +643,16 @@
*
* Do not use in new code.
*/
-#define wait_event_interruptible_tty(wq, condition) \
+#define wait_event_interruptible_tty(tty, wq, condition) \
({ \
int __ret = 0; \
if (!(condition)) { \
- __wait_event_interruptible_tty(wq, condition, __ret); \
+ __wait_event_interruptible_tty(tty, wq, condition, __ret); \
} \
__ret; \
})
-#define __wait_event_interruptible_tty(wq, condition, ret) \
+#define __wait_event_interruptible_tty(tty, wq, condition, ret) \
do { \
DEFINE_WAIT(__wait); \
\
@@ -656,9 +661,9 @@
if (condition) \
break; \
if (!signal_pending(current)) { \
- tty_unlock(); \
+ tty_unlock(tty); \
schedule(); \
- tty_lock(); \
+ tty_lock(tty); \
continue; \
} \
ret = -ERESTARTSYS; \
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index ff7dc08..fb79dd8d 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -110,6 +110,7 @@
#include <linux/fs.h>
#include <linux/wait.h>
#include <linux/pps_kernel.h>
+#include <linux/wait.h>
struct tty_ldisc_ops {
int magic;
@@ -154,6 +155,7 @@
struct tty_ldisc {
struct tty_ldisc_ops *ops;
atomic_t users;
+ wait_queue_head_t wq_idle;
};
#define TTY_LDISC_MAGIC 0x5403
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index e33d77f..50ae7d0 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -70,7 +70,6 @@
int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct unipair __user *list);
int con_set_default_unimap(struct vc_data *vc);
void con_free_unimap(struct vc_data *vc);
-void con_protect_unimap(struct vc_data *vc, int rdonly);
int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc);
#define vc_translate(vc, c) ((vc)->vc_translate[(c) | \
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index 4bf54b3..aa5d73b 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -48,13 +48,12 @@
static struct tty_driver *rfcomm_tty_driver;
struct rfcomm_dev {
+ struct tty_port port;
struct list_head list;
- atomic_t refcnt;
char name[12];
int id;
unsigned long flags;
- atomic_t opened;
int err;
bdaddr_t src;
@@ -64,9 +63,7 @@
uint modem_status;
struct rfcomm_dlc *dlc;
- struct tty_struct *tty;
wait_queue_head_t wait;
- struct work_struct wakeup_task;
struct device *tty_dev;
@@ -82,11 +79,18 @@
static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err);
static void rfcomm_dev_modem_status(struct rfcomm_dlc *dlc, u8 v24_sig);
-static void rfcomm_tty_wakeup(struct work_struct *work);
-
/* ---- Device functions ---- */
-static void rfcomm_dev_destruct(struct rfcomm_dev *dev)
+
+/*
+ * The reason this isn't actually a race, as you no doubt have a little voice
+ * screaming at you in your head, is that the refcount should never actually
+ * reach zero unless the device has already been taken off the list, in
+ * rfcomm_dev_del(). And if that's not true, we'll hit the BUG() in
+ * rfcomm_dev_destruct() anyway.
+ */
+static void rfcomm_dev_destruct(struct tty_port *port)
{
+ struct rfcomm_dev *dev = container_of(port, struct rfcomm_dev, port);
struct rfcomm_dlc *dlc = dev->dlc;
BT_DBG("dev %p dlc %p", dev, dlc);
@@ -113,23 +117,9 @@
module_put(THIS_MODULE);
}
-static inline void rfcomm_dev_hold(struct rfcomm_dev *dev)
-{
- atomic_inc(&dev->refcnt);
-}
-
-static inline void rfcomm_dev_put(struct rfcomm_dev *dev)
-{
- /* The reason this isn't actually a race, as you no
- doubt have a little voice screaming at you in your
- head, is that the refcount should never actually
- reach zero unless the device has already been taken
- off the list, in rfcomm_dev_del(). And if that's not
- true, we'll hit the BUG() in rfcomm_dev_destruct()
- anyway. */
- if (atomic_dec_and_test(&dev->refcnt))
- rfcomm_dev_destruct(dev);
-}
+static const struct tty_port_operations rfcomm_port_ops = {
+ .destruct = rfcomm_dev_destruct,
+};
static struct rfcomm_dev *__rfcomm_dev_get(int id)
{
@@ -154,7 +144,7 @@
if (test_bit(RFCOMM_TTY_RELEASED, &dev->flags))
dev = NULL;
else
- rfcomm_dev_hold(dev);
+ tty_port_get(&dev->port);
}
spin_unlock(&rfcomm_dev_lock);
@@ -241,7 +231,6 @@
sprintf(dev->name, "rfcomm%d", dev->id);
list_add(&dev->list, head);
- atomic_set(&dev->refcnt, 1);
bacpy(&dev->src, &req->src);
bacpy(&dev->dst, &req->dst);
@@ -250,10 +239,9 @@
dev->flags = req->flags &
((1 << RFCOMM_RELEASE_ONHUP) | (1 << RFCOMM_REUSE_DLC));
- atomic_set(&dev->opened, 0);
-
+ tty_port_init(&dev->port);
+ dev->port.ops = &rfcomm_port_ops;
init_waitqueue_head(&dev->wait);
- INIT_WORK(&dev->wakeup_task, rfcomm_tty_wakeup);
skb_queue_head_init(&dev->pending);
@@ -320,18 +308,23 @@
static void rfcomm_dev_del(struct rfcomm_dev *dev)
{
+ unsigned long flags;
BT_DBG("dev %p", dev);
BUG_ON(test_and_set_bit(RFCOMM_TTY_RELEASED, &dev->flags));
- if (atomic_read(&dev->opened) > 0)
+ spin_lock_irqsave(&dev->port.lock, flags);
+ if (dev->port.count > 0) {
+ spin_unlock_irqrestore(&dev->port.lock, flags);
return;
+ }
+ spin_unlock_irqrestore(&dev->port.lock, flags);
spin_lock(&rfcomm_dev_lock);
list_del_init(&dev->list);
spin_unlock(&rfcomm_dev_lock);
- rfcomm_dev_put(dev);
+ tty_port_put(&dev->port);
}
/* ---- Send buffer ---- */
@@ -345,15 +338,16 @@
static void rfcomm_wfree(struct sk_buff *skb)
{
struct rfcomm_dev *dev = (void *) skb->sk;
+ struct tty_struct *tty = dev->port.tty;
atomic_sub(skb->truesize, &dev->wmem_alloc);
- if (test_bit(RFCOMM_TTY_ATTACHED, &dev->flags))
- queue_work(system_nrt_wq, &dev->wakeup_task);
- rfcomm_dev_put(dev);
+ if (test_bit(RFCOMM_TTY_ATTACHED, &dev->flags) && tty)
+ tty_wakeup(tty);
+ tty_port_put(&dev->port);
}
static inline void rfcomm_set_owner_w(struct sk_buff *skb, struct rfcomm_dev *dev)
{
- rfcomm_dev_hold(dev);
+ tty_port_get(&dev->port);
atomic_add(skb->truesize, &dev->wmem_alloc);
skb->sk = (void *) dev;
skb->destructor = rfcomm_wfree;
@@ -432,7 +426,7 @@
return -ENODEV;
if (dev->flags != NOCAP_FLAGS && !capable(CAP_NET_ADMIN)) {
- rfcomm_dev_put(dev);
+ tty_port_put(&dev->port);
return -EPERM;
}
@@ -440,12 +434,12 @@
rfcomm_dlc_close(dev->dlc, 0);
/* Shut down TTY synchronously before freeing rfcomm_dev */
- if (dev->tty)
- tty_vhangup(dev->tty);
+ if (dev->port.tty)
+ tty_vhangup(dev->port.tty);
if (!test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags))
rfcomm_dev_del(dev);
- rfcomm_dev_put(dev);
+ tty_port_put(&dev->port);
return 0;
}
@@ -523,7 +517,7 @@
if (copy_to_user(arg, &di, sizeof(di)))
err = -EFAULT;
- rfcomm_dev_put(dev);
+ tty_port_put(&dev->port);
return err;
}
@@ -559,7 +553,7 @@
return;
}
- tty = dev->tty;
+ tty = dev->port.tty;
if (!tty || !skb_queue_empty(&dev->pending)) {
skb_queue_tail(&dev->pending, skb);
return;
@@ -585,13 +579,13 @@
wake_up_interruptible(&dev->wait);
if (dlc->state == BT_CLOSED) {
- if (!dev->tty) {
+ if (!dev->port.tty) {
if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) {
/* Drop DLC lock here to avoid deadlock
* 1. rfcomm_dev_get will take rfcomm_dev_lock
* but in rfcomm_dev_add there's lock order:
* rfcomm_dev_lock -> dlc lock
- * 2. rfcomm_dev_put will deadlock if it's
+ * 2. tty_port_put will deadlock if it's
* the last reference
*/
rfcomm_dlc_unlock(dlc);
@@ -601,11 +595,11 @@
}
rfcomm_dev_del(dev);
- rfcomm_dev_put(dev);
+ tty_port_put(&dev->port);
rfcomm_dlc_lock(dlc);
}
} else
- tty_hangup(dev->tty);
+ tty_hangup(dev->port.tty);
}
}
@@ -618,8 +612,8 @@
BT_DBG("dlc %p dev %p v24_sig 0x%02x", dlc, dev, v24_sig);
if ((dev->modem_status & TIOCM_CD) && !(v24_sig & RFCOMM_V24_DV)) {
- if (dev->tty && !C_CLOCAL(dev->tty))
- tty_hangup(dev->tty);
+ if (dev->port.tty && !C_CLOCAL(dev->port.tty))
+ tty_hangup(dev->port.tty);
}
dev->modem_status =
@@ -630,21 +624,9 @@
}
/* ---- TTY functions ---- */
-static void rfcomm_tty_wakeup(struct work_struct *work)
-{
- struct rfcomm_dev *dev = container_of(work, struct rfcomm_dev,
- wakeup_task);
- struct tty_struct *tty = dev->tty;
- if (!tty)
- return;
-
- BT_DBG("dev %p tty %p", dev, tty);
- tty_wakeup(tty);
-}
-
static void rfcomm_tty_copy_pending(struct rfcomm_dev *dev)
{
- struct tty_struct *tty = dev->tty;
+ struct tty_struct *tty = dev->port.tty;
struct sk_buff *skb;
int inserted = 0;
@@ -671,6 +653,7 @@
DECLARE_WAITQUEUE(wait, current);
struct rfcomm_dev *dev;
struct rfcomm_dlc *dlc;
+ unsigned long flags;
int err, id;
id = tty->index;
@@ -686,10 +669,14 @@
return -ENODEV;
BT_DBG("dev %p dst %s channel %d opened %d", dev, batostr(&dev->dst),
- dev->channel, atomic_read(&dev->opened));
+ dev->channel, dev->port.count);
- if (atomic_inc_return(&dev->opened) > 1)
+ spin_lock_irqsave(&dev->port.lock, flags);
+ if (++dev->port.count > 1) {
+ spin_unlock_irqrestore(&dev->port.lock, flags);
return 0;
+ }
+ spin_unlock_irqrestore(&dev->port.lock, flags);
dlc = dev->dlc;
@@ -697,7 +684,7 @@
rfcomm_dlc_lock(dlc);
tty->driver_data = dev;
- dev->tty = tty;
+ dev->port.tty = tty;
rfcomm_dlc_unlock(dlc);
set_bit(RFCOMM_TTY_ATTACHED, &dev->flags);
@@ -723,9 +710,9 @@
break;
}
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&dev->wait, &wait);
@@ -744,13 +731,17 @@
static void rfcomm_tty_close(struct tty_struct *tty, struct file *filp)
{
struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data;
+ unsigned long flags;
+
if (!dev)
return;
BT_DBG("tty %p dev %p dlc %p opened %d", tty, dev, dev->dlc,
- atomic_read(&dev->opened));
+ dev->port.count);
- if (atomic_dec_and_test(&dev->opened)) {
+ spin_lock_irqsave(&dev->port.lock, flags);
+ if (!--dev->port.count) {
+ spin_unlock_irqrestore(&dev->port.lock, flags);
if (dev->tty_dev->parent)
device_move(dev->tty_dev, NULL, DPM_ORDER_DEV_LAST);
@@ -758,11 +749,10 @@
rfcomm_dlc_close(dev->dlc, 0);
clear_bit(RFCOMM_TTY_ATTACHED, &dev->flags);
- cancel_work_sync(&dev->wakeup_task);
rfcomm_dlc_lock(dev->dlc);
tty->driver_data = NULL;
- dev->tty = NULL;
+ dev->port.tty = NULL;
rfcomm_dlc_unlock(dev->dlc);
if (test_bit(RFCOMM_TTY_RELEASED, &dev->flags)) {
@@ -770,11 +760,12 @@
list_del_init(&dev->list);
spin_unlock(&rfcomm_dev_lock);
- rfcomm_dev_put(dev);
+ tty_port_put(&dev->port);
}
- }
+ } else
+ spin_unlock_irqrestore(&dev->port.lock, flags);
- rfcomm_dev_put(dev);
+ tty_port_put(&dev->port);
}
static int rfcomm_tty_write(struct tty_struct *tty, const unsigned char *buf, int count)
@@ -1083,7 +1074,7 @@
if (rfcomm_dev_get(dev->id) == NULL)
return;
rfcomm_dev_del(dev);
- rfcomm_dev_put(dev);
+ tty_port_put(&dev->port);
}
}