drivers/pci/hotplug/pcihp_skeleton.c - kernel/msm-5.4 - Gitiles

 /*
  * PCI Hot Plug Controller Skeleton Driver - 0.2
  *
  * Copyright (C) 2001,2003 Greg Kroah-Hartman (greg@kroah.com)
  * Copyright (C) 2001,2003 IBM Corp.
  *
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or (at
  * your option) any later version.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  * NON INFRINGEMENT.  See the GNU General Public License for more
  * details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  * This driver is to be used as a skeleton driver to be show how to interface
  * with the pci hotplug core easily.
  *
  * Send feedback to <greg@kroah.com>
  *
  */

 #include <linux/config.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include "pci_hotplug.h"

 struct slot {
 	u8 number;
 	struct hotplug_slot *hotplug_slot;
 	struct list_head slot_list;
 };

 static LIST_HEAD(slot_list);

 #define MY_NAME	"pcihp_skeleton"

 #define dbg(format, arg...)					\
 	do {							\
 		if (debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
 				MY_NAME , ## arg); 		\
 	} while (0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)


 /* local variables */
 static int debug;
 static int num_slots;

 #define DRIVER_VERSION	"0.3"
 #define DRIVER_AUTHOR	"Greg Kroah-Hartman <greg@kroah.com>"
 #define DRIVER_DESC	"Hot Plug PCI Controller Skeleton Driver"

 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 module_param(debug, bool, 0644);
 MODULE_PARM_DESC(debug, "Debugging mode enabled or not");

 static int enable_slot		(struct hotplug_slot *slot);
 static int disable_slot		(struct hotplug_slot *slot);
 static int set_attention_status (struct hotplug_slot *slot, u8 value);
 static int hardware_test	(struct hotplug_slot *slot, u32 value);
 static int get_power_status	(struct hotplug_slot *slot, u8 *value);
 static int get_attention_status	(struct hotplug_slot *slot, u8 *value);
 static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);

 static struct hotplug_slot_ops skel_hotplug_slot_ops = {
 	.owner =		THIS_MODULE,
 	.enable_slot =		enable_slot,
 	.disable_slot =		disable_slot,
 	.set_attention_status =	set_attention_status,
 	.hardware_test =	hardware_test,
 	.get_power_status =	get_power_status,
 	.get_attention_status =	get_attention_status,
 	.get_latch_status =	get_latch_status,
 	.get_adapter_status =	get_adapter_status,
 };

 static int enable_slot(struct hotplug_slot *hotplug_slot)
 {
 	struct slot *slot = hotplug_slot->private;
 	int retval = 0;

 	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

 	/*
 	 * Fill in code here to enable the specified slot
 	 */

 	return retval;
 }


 static int disable_slot(struct hotplug_slot *hotplug_slot)
 {
 	struct slot *slot = hotplug_slot->private;
 	int retval = 0;

 	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

 	/*
 	 * Fill in code here to disable the specified slot
 	 */

 	return retval;
 }

 static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
 {
 	struct slot *slot = hotplug_slot->private;
 	int retval = 0;

 	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

 	switch (status) {
 		case 0:
 			/*
 			 * Fill in code here to turn light off
 			 */
 			break;

 		case 1:
 		default:
 			/*
 			 * Fill in code here to turn light on
 			 */
 			break;
 	}

 	return retval;
 }

 static int hardware_test(struct hotplug_slot *hotplug_slot, u32 value)
 {
 	struct slot *slot = hotplug_slot->private;
 	int retval = 0;

 	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

 	switch (value) {
 		case 0:
 			/* Specify a test here */
 			break;
 		case 1:
 			/* Specify another test here */
 			break;
 	}

 	return retval;
 }

 static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
 {
 	struct slot *slot = hotplug_slot->private;
 	int retval = 0;

 	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

 	/*
 	 * Fill in logic to get the current power status of the specific
 	 * slot and store it in the *value location.
 	 */

 	return retval;
 }

 static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value)
 {
 	struct slot *slot = hotplug_slot->private;
 	int retval = 0;

 	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

 	/*
 	 * Fill in logic to get the current attention status of the specific
 	 * slot and store it in the *value location.
 	 */

 	return retval;
 }

 static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value)
 {
 	struct slot *slot = hotplug_slot->private;
 	int retval = 0;

 	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

 	/*
 	 * Fill in logic to get the current latch status of the specific
 	 * slot and store it in the *value location.
 	 */

 	return retval;
 }

 static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
 {
 	struct slot *slot = hotplug_slot->private;
 	int retval = 0;

 	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

 	/*
 	 * Fill in logic to get the current adapter status of the specific
 	 * slot and store it in the *value location.
 	 */

 	return retval;
 }

 static void release_slot(struct hotplug_slot *hotplug_slot)
 {
 	struct slot *slot = hotplug_slot->private;

 	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
 	kfree(slot->hotplug_slot->info);
 	kfree(slot->hotplug_slot->name);
 	kfree(slot->hotplug_slot);
 	kfree(slot);
 }

 #define SLOT_NAME_SIZE	10
 static void make_slot_name(struct slot *slot)
 {
 	/*
 	 * Stupid way to make a filename out of the slot name.
 	 * replace this if your hardware provides a better way to name slots.
 	 */
 	snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%d", slot->number);
 }

 /**
  * init_slots - initialize 'struct slot' structures for each slot
  *
  */
 static int __init init_slots(void)
 {
 	struct slot *slot;
 	struct hotplug_slot *hotplug_slot;
 	struct hotplug_slot_info *info;
 	char *name;
 	int retval = -ENOMEM;
 	int i;

 	/*
 	 * Create a structure for each slot, and register that slot
 	 * with the pci_hotplug subsystem.
 	 */
 	for (i = 0; i < num_slots; ++i) {
 		slot = kmalloc(sizeof(struct slot), GFP_KERNEL);
 		if (!slot)
 			goto error;
 		memset(slot, 0, sizeof(struct slot));

 		hotplug_slot = kmalloc(sizeof(struct hotplug_slot),
 					GFP_KERNEL);
 		if (!hotplug_slot)
 			goto error_slot;
 		memset(hotplug_slot, 0, sizeof (struct hotplug_slot));
 		slot->hotplug_slot = hotplug_slot;

 		info = kmalloc(sizeof(struct hotplug_slot_info), GFP_KERNEL);
 		if (!info)
 			goto error_hpslot;
 		memset(info, 0, sizeof (struct hotplug_slot_info));
 		hotplug_slot->info = info;

 		name = kmalloc(SLOT_NAME_SIZE, GFP_KERNEL);
 		if (!name)
 			goto error_info;
 		hotplug_slot->name = name;

 		slot->number = i;

 		hotplug_slot->private = slot;
 		hotplug_slot->release = &release_slot;
 		make_slot_name(slot);
 		hotplug_slot->ops = &skel_hotplug_slot_ops;

 		/*
 		 * Initialize the slot info structure with some known
 		 * good values.
 		 */
 		info->power_status = get_power_status(slot);
 		info->attention_status = get_attention_status(slot);
 		info->latch_status = get_latch_status(slot);
 		info->adapter_status = get_adapter_status(slot);

 		dbg("registering slot %d\n", i);
 		retval = pci_hp_register(slot->hotplug_slot);
 		if (retval) {
 			err("pci_hp_register failed with error %d\n", retval);
 			goto error_name;
 		}

 		/* add slot to our internal list */
 		list_add(&slot->slot_list, &slot_list);
 	}

 	return 0;
 error_name:
 	kfree(name);
 error_info:
 	kfree(info);
 error_hpslot:
 	kfree(hotplug_slot);
 error_slot:
 	kfree(slot);
 error:
 	return retval;
 }

 static void __exit cleanup_slots(void)
 {
 	struct list_head *tmp;
 	struct list_head *next;
 	struct slot *slot;

 	/*
 	 * Unregister all of our slots with the pci_hotplug subsystem.
 	 * Memory will be freed in release_slot() callback after slot's
 	 * lifespan is finished.
 	 */
 	list_for_each_safe(tmp, next, &slot_list) {
 		slot = list_entry(tmp, struct slot, slot_list);
 		list_del(&slot->slot_list);
 		pci_hp_deregister(slot->hotplug_slot);
 	}
 }

 static int __init pcihp_skel_init(void)
 {
 	int retval;

 	info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
 	/*
 	 * Do specific initialization stuff for your driver here
 	 * Like initializing your controller hardware (if any) and
 	 * determining the number of slots you have in the system
 	 * right now.
 	 */
 	num_slots = 5;

 	return init_slots();
 }

 static void __exit pcihp_skel_exit(void)
 {
 	/*
 	 * Clean everything up.
 	 */
 	cleanup_slots();
 }

 module_init(pcihp_skel_init);
 module_exit(pcihp_skel_exit);
	/*
	* PCI Hot Plug Controller Skeleton Driver - 0.2
	*
	* Copyright (C) 2001,2003 Greg Kroah-Hartman (greg@kroah.com)
	* Copyright (C) 2001,2003 IBM Corp.
	*
	* All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or (at
	* your option) any later version.
	*
	* This program is distributed in the hope that it will be useful, but
	* WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
	* NON INFRINGEMENT. See the GNU General Public License for more
	* details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*
	* This driver is to be used as a skeleton driver to be show how to interface
	* with the pci hotplug core easily.
	*
	* Send feedback to <greg@kroah.com>
	*
	*/

	#include <linux/config.h>
	#include <linux/module.h>
	#include <linux/moduleparam.h>
	#include <linux/kernel.h>
	#include <linux/slab.h>
	#include <linux/pci.h>
	#include <linux/init.h>
	#include "pci_hotplug.h"

	struct slot {
	u8 number;
	struct hotplug_slot *hotplug_slot;
	struct list_head slot_list;
	};

	static LIST_HEAD(slot_list);

	#define MY_NAME "pcihp_skeleton"

	#define dbg(format, arg...) \
	do { \
	if (debug) \
	printk (KERN_DEBUG "%s: " format "\n", \
	MY_NAME , ## arg); \
	} while (0)
	#define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
	#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
	#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)



	/* local variables */
	static int debug;
	static int num_slots;

	#define DRIVER_VERSION "0.3"
	#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
	#define DRIVER_DESC "Hot Plug PCI Controller Skeleton Driver"

	MODULE_AUTHOR(DRIVER_AUTHOR);
	MODULE_DESCRIPTION(DRIVER_DESC);
	MODULE_LICENSE("GPL");
	module_param(debug, bool, 0644);
	MODULE_PARM_DESC(debug, "Debugging mode enabled or not");

	static int enable_slot (struct hotplug_slot *slot);
	static int disable_slot (struct hotplug_slot *slot);
	static int set_attention_status (struct hotplug_slot *slot, u8 value);
	static int hardware_test (struct hotplug_slot *slot, u32 value);
	static int get_power_status (struct hotplug_slot slot, u8 value);
	static int get_attention_status (struct hotplug_slot slot, u8 value);
	static int get_latch_status (struct hotplug_slot slot, u8 value);
	static int get_adapter_status (struct hotplug_slot slot, u8 value);

	static struct hotplug_slot_ops skel_hotplug_slot_ops = {
	.owner = THIS_MODULE,
	.enable_slot = enable_slot,
	.disable_slot = disable_slot,
	.set_attention_status = set_attention_status,
	.hardware_test = hardware_test,
	.get_power_status = get_power_status,
	.get_attention_status = get_attention_status,
	.get_latch_status = get_latch_status,
	.get_adapter_status = get_adapter_status,
	};

	static int enable_slot(struct hotplug_slot *hotplug_slot)
	{
	struct slot *slot = hotplug_slot->private;
	int retval = 0;

	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

	/*
	* Fill in code here to enable the specified slot
	*/

	return retval;
	}


	static int disable_slot(struct hotplug_slot *hotplug_slot)
	{
	struct slot *slot = hotplug_slot->private;
	int retval = 0;

	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

	/*
	* Fill in code here to disable the specified slot
	*/

	return retval;
	}

	static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
	{
	struct slot *slot = hotplug_slot->private;
	int retval = 0;

	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

	switch (status) {
	case 0:
	/*
	* Fill in code here to turn light off
	*/
	break;

	case 1:
	default:
	/*
	* Fill in code here to turn light on
	*/
	break;
	}

	return retval;
	}

	static int hardware_test(struct hotplug_slot *hotplug_slot, u32 value)
	{
	struct slot *slot = hotplug_slot->private;
	int retval = 0;

	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

	switch (value) {
	case 0:
	/* Specify a test here */
	break;
	case 1:
	/* Specify another test here */
	break;
	}

	return retval;
	}

	static int get_power_status(struct hotplug_slot hotplug_slot, u8 value)
	{
	struct slot *slot = hotplug_slot->private;
	int retval = 0;

	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

	/*
	* Fill in logic to get the current power status of the specific
	* slot and store it in the *value location.
	*/

	return retval;
	}

	static int get_attention_status(struct hotplug_slot hotplug_slot, u8 value)
	{
	struct slot *slot = hotplug_slot->private;
	int retval = 0;

	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

	/*
	* Fill in logic to get the current attention status of the specific
	* slot and store it in the *value location.
	*/

	return retval;
	}

	static int get_latch_status(struct hotplug_slot hotplug_slot, u8 value)
	{
	struct slot *slot = hotplug_slot->private;
	int retval = 0;

	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

	/*
	* Fill in logic to get the current latch status of the specific
	* slot and store it in the *value location.
	*/

	return retval;
	}

	static int get_adapter_status(struct hotplug_slot hotplug_slot, u8 value)
	{
	struct slot *slot = hotplug_slot->private;
	int retval = 0;

	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);

	/*
	* Fill in logic to get the current adapter status of the specific
	* slot and store it in the *value location.
	*/

	return retval;
	}

	static void release_slot(struct hotplug_slot *hotplug_slot)
	{
	struct slot *slot = hotplug_slot->private;

	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
	kfree(slot->hotplug_slot->info);
	kfree(slot->hotplug_slot->name);
	kfree(slot->hotplug_slot);
	kfree(slot);
	}

	#define SLOT_NAME_SIZE 10
	static void make_slot_name(struct slot *slot)
	{
	/*
	* Stupid way to make a filename out of the slot name.
	* replace this if your hardware provides a better way to name slots.
	*/
	snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%d", slot->number);
	}

	/**
	* init_slots - initialize 'struct slot' structures for each slot
	*
	*/
	static int __init init_slots(void)
	{
	struct slot *slot;
	struct hotplug_slot *hotplug_slot;
	struct hotplug_slot_info *info;
	char *name;
	int retval = -ENOMEM;
	int i;

	/*
	* Create a structure for each slot, and register that slot
	* with the pci_hotplug subsystem.
	*/
	for (i = 0; i < num_slots; ++i) {
	slot = kmalloc(sizeof(struct slot), GFP_KERNEL);
	if (!slot)
	goto error;
	memset(slot, 0, sizeof(struct slot));

	hotplug_slot = kmalloc(sizeof(struct hotplug_slot),
	GFP_KERNEL);
	if (!hotplug_slot)
	goto error_slot;
	memset(hotplug_slot, 0, sizeof (struct hotplug_slot));
	slot->hotplug_slot = hotplug_slot;

	info = kmalloc(sizeof(struct hotplug_slot_info), GFP_KERNEL);
	if (!info)
	goto error_hpslot;
	memset(info, 0, sizeof (struct hotplug_slot_info));
	hotplug_slot->info = info;

	name = kmalloc(SLOT_NAME_SIZE, GFP_KERNEL);
	if (!name)
	goto error_info;
	hotplug_slot->name = name;

	slot->number = i;

	hotplug_slot->private = slot;
	hotplug_slot->release = &release_slot;
	make_slot_name(slot);
	hotplug_slot->ops = &skel_hotplug_slot_ops;

	/*
	* Initialize the slot info structure with some known
	* good values.
	*/
	info->power_status = get_power_status(slot);
	info->attention_status = get_attention_status(slot);
	info->latch_status = get_latch_status(slot);
	info->adapter_status = get_adapter_status(slot);

	dbg("registering slot %d\n", i);
	retval = pci_hp_register(slot->hotplug_slot);
	if (retval) {
	err("pci_hp_register failed with error %d\n", retval);
	goto error_name;
	}

	/* add slot to our internal list */
	list_add(&slot->slot_list, &slot_list);
	}

	return 0;
	error_name:
	kfree(name);
	error_info:
	kfree(info);
	error_hpslot:
	kfree(hotplug_slot);
	error_slot:
	kfree(slot);
	error:
	return retval;
	}

	static void __exit cleanup_slots(void)
	{
	struct list_head *tmp;
	struct list_head *next;
	struct slot *slot;

	/*
	* Unregister all of our slots with the pci_hotplug subsystem.
	* Memory will be freed in release_slot() callback after slot's
	* lifespan is finished.
	*/
	list_for_each_safe(tmp, next, &slot_list) {
	slot = list_entry(tmp, struct slot, slot_list);
	list_del(&slot->slot_list);
	pci_hp_deregister(slot->hotplug_slot);
	}
	}

	static int __init pcihp_skel_init(void)
	{
	int retval;

	info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
	/*
	* Do specific initialization stuff for your driver here
	* Like initializing your controller hardware (if any) and
	* determining the number of slots you have in the system
	* right now.
	*/
	num_slots = 5;

	return init_slots();
	}

	static void __exit pcihp_skel_exit(void)
	{
	/*
	* Clean everything up.
	*/
	cleanup_slots();
	}

	module_init(pcihp_skel_init);
	module_exit(pcihp_skel_exit);