ath10k: fix core start sequence
It was possible to call hif_stop() 2 times through
ath10k_htc_connect_init() timeout failpath which
could lead to double free_irq() kernel splat for
multiple MSI interrupt case.
Re-order init sequence to avoid this problem. The
HTC stop shouldn't stop HIF implicitly since it
doesn't implicitly start it. Since the re-ordering
required some functions to be split/removed/renamed
rename a few functions to make more sense while at
it.
Reported-By: Ben Greear <greearb@candelatech.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
diff --git a/drivers/net/wireless/ath/ath10k/htt.c b/drivers/net/wireless/ath/ath10k/htt.c
index 69697af5..19c12cc 100644
--- a/drivers/net/wireless/ath/ath10k/htt.c
+++ b/drivers/net/wireless/ath/ath10k/htt.c
@@ -22,7 +22,7 @@
#include "core.h"
#include "debug.h"
-static int ath10k_htt_htc_attach(struct ath10k_htt *htt)
+int ath10k_htt_connect(struct ath10k_htt *htt)
{
struct ath10k_htc_svc_conn_req conn_req;
struct ath10k_htc_svc_conn_resp conn_resp;
@@ -48,39 +48,14 @@
return 0;
}
-int ath10k_htt_attach(struct ath10k *ar)
+int ath10k_htt_init(struct ath10k *ar)
{
struct ath10k_htt *htt = &ar->htt;
- int ret;
htt->ar = ar;
htt->max_throughput_mbps = 800;
/*
- * Connect to HTC service.
- * This has to be done before calling ath10k_htt_rx_attach,
- * since ath10k_htt_rx_attach involves sending a rx ring configure
- * message to the target.
- */
- ret = ath10k_htt_htc_attach(htt);
- if (ret) {
- ath10k_err("could not attach htt htc (%d)\n", ret);
- goto err_htc_attach;
- }
-
- ret = ath10k_htt_tx_attach(htt);
- if (ret) {
- ath10k_err("could not attach htt tx (%d)\n", ret);
- goto err_htc_attach;
- }
-
- ret = ath10k_htt_rx_attach(htt);
- if (ret) {
- ath10k_err("could not attach htt rx (%d)\n", ret);
- goto err_rx_attach;
- }
-
- /*
* Prefetch enough data to satisfy target
* classification engine.
* This is for LL chips. HL chips will probably
@@ -93,11 +68,6 @@
2; /* ip4 dscp or ip6 priority */
return 0;
-
-err_rx_attach:
- ath10k_htt_tx_detach(htt);
-err_htc_attach:
- return ret;
}
#define HTT_TARGET_VERSION_TIMEOUT_HZ (3*HZ)
@@ -117,7 +87,7 @@
return 0;
}
-int ath10k_htt_attach_target(struct ath10k_htt *htt)
+int ath10k_htt_setup(struct ath10k_htt *htt)
{
int status;
@@ -140,9 +110,3 @@
return ath10k_htt_send_rx_ring_cfg_ll(htt);
}
-
-void ath10k_htt_detach(struct ath10k_htt *htt)
-{
- ath10k_htt_rx_detach(htt);
- ath10k_htt_tx_detach(htt);
-}