Merge tag 'edac_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
- new EDAC driver for some TI SOCs (Tero Kristo)
- small cleanups
* tag 'edac_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, mv64x60: Fix an error handling path
EDAC, ti: Add support for TI keystone and DRA7xx EDAC
EDAC, octeon: Fix an uninitialized variable warning
diff --git a/MAINTAINERS b/MAINTAINERS
index d9da617..a9c9c9f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5141,6 +5141,12 @@
S: Maintained
F: drivers/edac/skx_edac.c
+EDAC-TI
+M: Tero Kristo <t-kristo@ti.com>
+L: linux-edac@vger.kernel.org
+S: Maintained
+F: drivers/edac/ti_edac.c
+
EDIROL UA-101/UA-1000 DRIVER
M: Clemens Ladisch <clemens@ladisch.de>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 96afb2a..3c40170 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -457,4 +457,11 @@
Support for error detection and correction on the
APM X-Gene family of SOCs.
+config EDAC_TI
+ tristate "Texas Instruments DDR3 ECC Controller"
+ depends on ARCH_KEYSTONE || SOC_DRA7XX
+ help
+ Support for error detection and correction on the
+ TI SoCs.
+
endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 0fd9ffa..b54912e 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -78,3 +78,4 @@
obj-$(CONFIG_EDAC_ALTERA) += altera_edac.o
obj-$(CONFIG_EDAC_SYNOPSYS) += synopsys_edac.o
obj-$(CONFIG_EDAC_XGENE) += xgene_edac.o
+obj-$(CONFIG_EDAC_TI) += ti_edac.o
diff --git a/drivers/edac/mv64x60_edac.c b/drivers/edac/mv64x60_edac.c
index ec5d695..3c68bb5 100644
--- a/drivers/edac/mv64x60_edac.c
+++ b/drivers/edac/mv64x60_edac.c
@@ -758,7 +758,7 @@
/* Non-ECC RAM? */
printk(KERN_WARNING "%s: No ECC DIMMs discovered\n", __func__);
res = -ENODEV;
- goto err2;
+ goto err;
}
edac_dbg(3, "init mci\n");
diff --git a/drivers/edac/octeon_edac-lmc.c b/drivers/edac/octeon_edac-lmc.c
index 9c1ffe3..aeb222c 100644
--- a/drivers/edac/octeon_edac-lmc.c
+++ b/drivers/edac/octeon_edac-lmc.c
@@ -78,6 +78,7 @@
if (!pvt->inject)
int_reg.u64 = cvmx_read_csr(CVMX_LMCX_INT(mci->mc_idx));
else {
+ int_reg.u64 = 0;
if (pvt->error_type == 1)
int_reg.s.sec_err = 1;
if (pvt->error_type == 2)
diff --git a/drivers/edac/ti_edac.c b/drivers/edac/ti_edac.c
new file mode 100644
index 0000000..6ac26d1
--- /dev/null
+++ b/drivers/edac/ti_edac.c
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Texas Instruments DDR3 ECC error correction and detection driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/edac.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+
+#include "edac_module.h"
+
+/* EMIF controller registers */
+#define EMIF_SDRAM_CONFIG 0x008
+#define EMIF_IRQ_STATUS 0x0ac
+#define EMIF_IRQ_ENABLE_SET 0x0b4
+#define EMIF_ECC_CTRL 0x110
+#define EMIF_1B_ECC_ERR_CNT 0x130
+#define EMIF_1B_ECC_ERR_THRSH 0x134
+#define EMIF_1B_ECC_ERR_ADDR_LOG 0x13c
+#define EMIF_2B_ECC_ERR_ADDR_LOG 0x140
+
+/* Bit definitions for EMIF_SDRAM_CONFIG */
+#define SDRAM_TYPE_SHIFT 29
+#define SDRAM_TYPE_MASK GENMASK(31, 29)
+#define SDRAM_TYPE_DDR3 (3 << SDRAM_TYPE_SHIFT)
+#define SDRAM_TYPE_DDR2 (2 << SDRAM_TYPE_SHIFT)
+#define SDRAM_NARROW_MODE_MASK GENMASK(15, 14)
+#define SDRAM_K2_NARROW_MODE_SHIFT 12
+#define SDRAM_K2_NARROW_MODE_MASK GENMASK(13, 12)
+#define SDRAM_ROWSIZE_SHIFT 7
+#define SDRAM_ROWSIZE_MASK GENMASK(9, 7)
+#define SDRAM_IBANK_SHIFT 4
+#define SDRAM_IBANK_MASK GENMASK(6, 4)
+#define SDRAM_K2_IBANK_SHIFT 5
+#define SDRAM_K2_IBANK_MASK GENMASK(6, 5)
+#define SDRAM_K2_EBANK_SHIFT 3
+#define SDRAM_K2_EBANK_MASK BIT(SDRAM_K2_EBANK_SHIFT)
+#define SDRAM_PAGESIZE_SHIFT 0
+#define SDRAM_PAGESIZE_MASK GENMASK(2, 0)
+#define SDRAM_K2_PAGESIZE_SHIFT 0
+#define SDRAM_K2_PAGESIZE_MASK GENMASK(1, 0)
+
+#define EMIF_1B_ECC_ERR_THRSH_SHIFT 24
+
+/* IRQ bit definitions */
+#define EMIF_1B_ECC_ERR BIT(5)
+#define EMIF_2B_ECC_ERR BIT(4)
+#define EMIF_WR_ECC_ERR BIT(3)
+#define EMIF_SYS_ERR BIT(0)
+/* Bit 31 enables ECC and 28 enables RMW */
+#define ECC_ENABLED (BIT(31) | BIT(28))
+
+#define EDAC_MOD_NAME "ti-emif-edac"
+
+enum {
+ EMIF_TYPE_DRA7,
+ EMIF_TYPE_K2
+};
+
+struct ti_edac {
+ void __iomem *reg;
+};
+
+static u32 ti_edac_readl(struct ti_edac *edac, u16 offset)
+{
+ return readl_relaxed(edac->reg + offset);
+}
+
+static void ti_edac_writel(struct ti_edac *edac, u32 val, u16 offset)
+{
+ writel_relaxed(val, edac->reg + offset);
+}
+
+static irqreturn_t ti_edac_isr(int irq, void *data)
+{
+ struct mem_ctl_info *mci = data;
+ struct ti_edac *edac = mci->pvt_info;
+ u32 irq_status;
+ u32 err_addr;
+ int err_count;
+
+ irq_status = ti_edac_readl(edac, EMIF_IRQ_STATUS);
+
+ if (irq_status & EMIF_1B_ECC_ERR) {
+ err_addr = ti_edac_readl(edac, EMIF_1B_ECC_ERR_ADDR_LOG);
+ err_count = ti_edac_readl(edac, EMIF_1B_ECC_ERR_CNT);
+ ti_edac_writel(edac, err_count, EMIF_1B_ECC_ERR_CNT);
+ edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,
+ err_addr >> PAGE_SHIFT,
+ err_addr & ~PAGE_MASK, -1, 0, 0, 0,
+ mci->ctl_name, "1B");
+ }
+
+ if (irq_status & EMIF_2B_ECC_ERR) {
+ err_addr = ti_edac_readl(edac, EMIF_2B_ECC_ERR_ADDR_LOG);
+ edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+ err_addr >> PAGE_SHIFT,
+ err_addr & ~PAGE_MASK, -1, 0, 0, 0,
+ mci->ctl_name, "2B");
+ }
+
+ if (irq_status & EMIF_WR_ECC_ERR)
+ edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+ 0, 0, -1, 0, 0, 0,
+ mci->ctl_name, "WR");
+
+ ti_edac_writel(edac, irq_status, EMIF_IRQ_STATUS);
+
+ return IRQ_HANDLED;
+}
+
+static void ti_edac_setup_dimm(struct mem_ctl_info *mci, u32 type)
+{
+ struct dimm_info *dimm;
+ struct ti_edac *edac = mci->pvt_info;
+ int bits;
+ u32 val;
+ u32 memsize;
+
+ dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, 0, 0, 0);
+
+ val = ti_edac_readl(edac, EMIF_SDRAM_CONFIG);
+
+ if (type == EMIF_TYPE_DRA7) {
+ bits = ((val & SDRAM_PAGESIZE_MASK) >> SDRAM_PAGESIZE_SHIFT) + 8;
+ bits += ((val & SDRAM_ROWSIZE_MASK) >> SDRAM_ROWSIZE_SHIFT) + 9;
+ bits += (val & SDRAM_IBANK_MASK) >> SDRAM_IBANK_SHIFT;
+
+ if (val & SDRAM_NARROW_MODE_MASK) {
+ bits++;
+ dimm->dtype = DEV_X16;
+ } else {
+ bits += 2;
+ dimm->dtype = DEV_X32;
+ }
+ } else {
+ bits = 16;
+ bits += ((val & SDRAM_K2_PAGESIZE_MASK) >>
+ SDRAM_K2_PAGESIZE_SHIFT) + 8;
+ bits += (val & SDRAM_K2_IBANK_MASK) >> SDRAM_K2_IBANK_SHIFT;
+ bits += (val & SDRAM_K2_EBANK_MASK) >> SDRAM_K2_EBANK_SHIFT;
+
+ val = (val & SDRAM_K2_NARROW_MODE_MASK) >>
+ SDRAM_K2_NARROW_MODE_SHIFT;
+ switch (val) {
+ case 0:
+ bits += 3;
+ dimm->dtype = DEV_X64;
+ break;
+ case 1:
+ bits += 2;
+ dimm->dtype = DEV_X32;
+ break;
+ case 2:
+ bits++;
+ dimm->dtype = DEV_X16;
+ break;
+ }
+ }
+
+ memsize = 1 << bits;
+
+ dimm->nr_pages = memsize >> PAGE_SHIFT;
+ dimm->grain = 4;
+ if ((val & SDRAM_TYPE_MASK) == SDRAM_TYPE_DDR2)
+ dimm->mtype = MEM_DDR2;
+ else
+ dimm->mtype = MEM_DDR3;
+
+ val = ti_edac_readl(edac, EMIF_ECC_CTRL);
+ if (val & ECC_ENABLED)
+ dimm->edac_mode = EDAC_SECDED;
+ else
+ dimm->edac_mode = EDAC_NONE;
+}
+
+static const struct of_device_id ti_edac_of_match[] = {
+ { .compatible = "ti,emif-keystone", .data = (void *)EMIF_TYPE_K2 },
+ { .compatible = "ti,emif-dra7xx", .data = (void *)EMIF_TYPE_DRA7 },
+ {},
+};
+
+static int _emif_get_id(struct device_node *node)
+{
+ struct device_node *np;
+ const __be32 *addrp;
+ u32 addr, my_addr;
+ int my_id = 0;
+
+ addrp = of_get_address(node, 0, NULL, NULL);
+ my_addr = (u32)of_translate_address(node, addrp);
+
+ for_each_matching_node(np, ti_edac_of_match) {
+ if (np == node)
+ continue;
+
+ addrp = of_get_address(np, 0, NULL, NULL);
+ addr = (u32)of_translate_address(np, addrp);
+
+ edac_printk(KERN_INFO, EDAC_MOD_NAME,
+ "addr=%x, my_addr=%x\n",
+ addr, my_addr);
+
+ if (addr < my_addr)
+ my_id++;
+ }
+
+ return my_id;
+}
+
+static int ti_edac_probe(struct platform_device *pdev)
+{
+ int error_irq = 0, ret = -ENODEV;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ void __iomem *reg;
+ struct mem_ctl_info *mci;
+ struct edac_mc_layer layers[1];
+ const struct of_device_id *id;
+ struct ti_edac *edac;
+ int emif_id;
+
+ id = of_match_device(ti_edac_of_match, &pdev->dev);
+ if (!id)
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg = devm_ioremap_resource(dev, res);
+ if (IS_ERR(reg)) {
+ edac_printk(KERN_ERR, EDAC_MOD_NAME,
+ "EMIF controller regs not defined\n");
+ return PTR_ERR(reg);
+ }
+
+ layers[0].type = EDAC_MC_LAYER_ALL_MEM;
+ layers[0].size = 1;
+
+ /* Allocate ID number for our EMIF controller */
+ emif_id = _emif_get_id(pdev->dev.of_node);
+ if (emif_id < 0)
+ return -EINVAL;
+
+ mci = edac_mc_alloc(emif_id, 1, layers, sizeof(*edac));
+ if (!mci)
+ return -ENOMEM;
+
+ mci->pdev = &pdev->dev;
+ edac = mci->pvt_info;
+ edac->reg = reg;
+ platform_set_drvdata(pdev, mci);
+
+ mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2;
+ mci->edac_ctl_cap = EDAC_FLAG_SECDED | EDAC_FLAG_NONE;
+ mci->mod_name = EDAC_MOD_NAME;
+ mci->ctl_name = id->compatible;
+ mci->dev_name = dev_name(&pdev->dev);
+
+ /* Setup memory layout */
+ ti_edac_setup_dimm(mci, (u32)(id->data));
+
+ /* add EMIF ECC error handler */
+ error_irq = platform_get_irq(pdev, 0);
+ if (!error_irq) {
+ edac_printk(KERN_ERR, EDAC_MOD_NAME,
+ "EMIF irq number not defined.\n");
+ goto err;
+ }
+
+ ret = devm_request_irq(dev, error_irq, ti_edac_isr, 0,
+ "emif-edac-irq", mci);
+ if (ret) {
+ edac_printk(KERN_ERR, EDAC_MOD_NAME,
+ "request_irq fail for EMIF EDAC irq\n");
+ goto err;
+ }
+
+ ret = edac_mc_add_mc(mci);
+ if (ret) {
+ edac_printk(KERN_ERR, EDAC_MOD_NAME,
+ "Failed to register mci: %d.\n", ret);
+ goto err;
+ }
+
+ /* Generate an interrupt with each 1b error */
+ ti_edac_writel(edac, 1 << EMIF_1B_ECC_ERR_THRSH_SHIFT,
+ EMIF_1B_ECC_ERR_THRSH);
+
+ /* Enable interrupts */
+ ti_edac_writel(edac,
+ EMIF_1B_ECC_ERR | EMIF_2B_ECC_ERR | EMIF_WR_ECC_ERR,
+ EMIF_IRQ_ENABLE_SET);
+
+ return 0;
+
+err:
+ edac_mc_free(mci);
+ return ret;
+}
+
+static int ti_edac_remove(struct platform_device *pdev)
+{
+ struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+ edac_mc_del_mc(&pdev->dev);
+ edac_mc_free(mci);
+
+ return 0;
+}
+
+static struct platform_driver ti_edac_driver = {
+ .probe = ti_edac_probe,
+ .remove = ti_edac_remove,
+ .driver = {
+ .name = EDAC_MOD_NAME,
+ .of_match_table = ti_edac_of_match,
+ },
+};
+
+module_platform_driver(ti_edac_driver);
+
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("EDAC Driver for Texas Instruments DDR3 MC");
+MODULE_LICENSE("GPL v2");