Merge tag 's5pv210-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc
Merge "Samsung S5PV210 DT support for v3.17" from Kukjin Kim:
- support common clock framework for s5pv210 clock
- add generic PHY driver on s5pv210 to support it via DT
- add dt support for s5pv210-goni, smdkc110, smdkv210 and torbreck boards
- remove board files from mach-s5pv210 and unused codes
- enable multiplatform for s5pv210
* tag 's5pv210-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
clk: samsung: s5pv210: Remove legacy board support
ARM: SAMSUNG: Remove remaining legacy code
gpio: samsung: Remove legacy support of S5PV210
ARM: S5PV210: Enable multi-platform build support
cpufreq: s5pv210: Make the driver multiplatform aware
ARM: S5PV210: Register cpufreq platform device
ARM: S5PV210: move debug-macro.S into the common space
ARM: S5PV210: Untie PM support from legacy code
ARM: S5PV210: Remove support for board files
ARM: dts: Add Device tree for s5pc110/s5pv210 boards
ARM: dts: Add Device tree for s5pv210 SoC
ARM: S5PV210: Add board file for boot using Device Tree
phy: Add support for S5PV210 to the Exynos USB 2.0 PHY driver
clk: samsung: Add S5PV210 Audio Subsystem clock driver
ARM: SAMSUNG: Remove legacy clock code
serial: samsung: Remove support for legacy clock code
cpufreq: s3c24xx: Remove some dead code
ARM: S5PV210: Migrate clock handling to Common Clock Framework
clk: samsung: Add clock driver for S5PV210 and compatible SoCs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
index fd786ea..e182be5 100644
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -60,12 +60,6 @@
configuring GPIOs it can get its ACPI handle and extract this information
from ACPI tables.
-Currently the kernel is not able to automatically determine from which ACPI
-device it should make the corresponding platform device so we need to add
-the ACPI device explicitly to acpi_platform_device_ids list defined in
-drivers/acpi/acpi_platform.c. This limitation is only for the platform
-devices, SPI and I2C devices are created automatically as described below.
-
DMA support
~~~~~~~~~~~
DMA controllers enumerated via ACPI should be registered in the system to
diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README
index 2cce540..1af3a5d 100644
--- a/Documentation/arm/Marvell/README
+++ b/Documentation/arm/Marvell/README
@@ -83,7 +83,9 @@
88F6710
88F6707
88F6W11
- Product Brief: http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf
+ Product Brief: http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf
+ Hardware Spec: http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-datasheet.pdf
+ Functional Spec: http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-FunctionalSpec-datasheet.pdf
Armada 375 Flavors:
88F6720
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index 3509707..c554ed3 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -86,3 +86,9 @@
compatible = "arm,versatile-sic";
interrupt-controller;
#interrupt-cells = <1>;
+
+Required nodes:
+
+- core-module: the root node to the Versatile platforms must have
+ a core-module with regs and the compatible strings
+ "arm,core-module-versatile", "syscon"
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
new file mode 100644
index 0000000..d6ac71f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -0,0 +1,8 @@
+Mediatek MT6589 Platforms Device Tree Bindings
+
+Boards with a SoC of the Mediatek MT6589 shall have the following property:
+
+Required root node property:
+
+compatible: must contain "mediatek,mt6589"
+
diff --git a/Documentation/devicetree/bindings/clock/arm-integrator.txt b/Documentation/devicetree/bindings/clock/arm-integrator.txt
index 652914b..ecc6952 100644
--- a/Documentation/devicetree/bindings/clock/arm-integrator.txt
+++ b/Documentation/devicetree/bindings/clock/arm-integrator.txt
@@ -1,4 +1,4 @@
-Clock bindings for ARM Integrator Core Module clocks
+Clock bindings for ARM Integrator and Versatile Core Module clocks
Auxilary Oscillator Clock
@@ -12,7 +12,7 @@
Required properties:
-- compatible: must be "arm,integrator-cm-auxosc"
+- compatible: must be "arm,integrator-cm-auxosc" or "arm,versatile-cm-auxosc"
- #clock-cells: must be <0>
Optional properties:
diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.txt b/Documentation/devicetree/bindings/clock/imx1-clock.txt
new file mode 100644
index 0000000..b7adf4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx1-clock.txt
@@ -0,0 +1,26 @@
+* Clock bindings for Freescale i.MX1 CPUs
+
+Required properties:
+- compatible: Should be "fsl,imx1-ccm".
+- reg: Address and length of the register set.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+for the full list of i.MX1 clock IDs.
+
+Examples:
+ clks: ccm@0021b000 {
+ #clock-cells = <1>;
+ compatible = "fsl,imx1-ccm";
+ reg = <0x0021b000 0x1000>;
+ };
+
+ pwm: pwm@00208000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx1-pwm";
+ reg = <0x00208000 0x1000>;
+ interrupts = <34>;
+ clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
+ clock-names = "ipg", "per";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.txt b/Documentation/devicetree/bindings/clock/imx21-clock.txt
new file mode 100644
index 0000000..c3b0db4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx21-clock.txt
@@ -0,0 +1,28 @@
+* Clock bindings for Freescale i.MX21
+
+Required properties:
+- compatible : Should be "fsl,imx21-ccm".
+- reg : Address and length of the register set.
+- interrupts : Should contain CCM interrupt.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
+for the full list of i.MX21 clock IDs.
+
+Examples:
+ clks: ccm@10027000{
+ compatible = "fsl,imx21-ccm";
+ reg = <0x10027000 0x800>;
+ #clock-cells = <1>;
+ };
+
+ uart1: serial@1000a000 {
+ compatible = "fsl,imx21-uart";
+ reg = <0x1000a000 0x1000>;
+ interrupts = <20>;
+ clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
+ <&clks IMX21_CLK_PER1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt
index 6bc9fd2..cc05de9 100644
--- a/Documentation/devicetree/bindings/clock/imx27-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.txt
@@ -7,117 +7,22 @@
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX27
-clocks and IDs.
-
- Clock ID
- -----------------------
- dummy 0
- ckih 1
- ckil 2
- mpll 3
- spll 4
- mpll_main2 5
- ahb 6
- ipg 7
- nfc_div 8
- per1_div 9
- per2_div 10
- per3_div 11
- per4_div 12
- vpu_sel 13
- vpu_div 14
- usb_div 15
- cpu_sel 16
- clko_sel 17
- cpu_div 18
- clko_div 19
- ssi1_sel 20
- ssi2_sel 21
- ssi1_div 22
- ssi2_div 23
- clko_en 24
- ssi2_ipg_gate 25
- ssi1_ipg_gate 26
- slcdc_ipg_gate 27
- sdhc3_ipg_gate 28
- sdhc2_ipg_gate 29
- sdhc1_ipg_gate 30
- scc_ipg_gate 31
- sahara_ipg_gate 32
- rtc_ipg_gate 33
- pwm_ipg_gate 34
- owire_ipg_gate 35
- lcdc_ipg_gate 36
- kpp_ipg_gate 37
- iim_ipg_gate 38
- i2c2_ipg_gate 39
- i2c1_ipg_gate 40
- gpt6_ipg_gate 41
- gpt5_ipg_gate 42
- gpt4_ipg_gate 43
- gpt3_ipg_gate 44
- gpt2_ipg_gate 45
- gpt1_ipg_gate 46
- gpio_ipg_gate 47
- fec_ipg_gate 48
- emma_ipg_gate 49
- dma_ipg_gate 50
- cspi3_ipg_gate 51
- cspi2_ipg_gate 52
- cspi1_ipg_gate 53
- nfc_baud_gate 54
- ssi2_baud_gate 55
- ssi1_baud_gate 56
- vpu_baud_gate 57
- per4_gate 58
- per3_gate 59
- per2_gate 60
- per1_gate 61
- usb_ahb_gate 62
- slcdc_ahb_gate 63
- sahara_ahb_gate 64
- lcdc_ahb_gate 65
- vpu_ahb_gate 66
- fec_ahb_gate 67
- emma_ahb_gate 68
- emi_ahb_gate 69
- dma_ahb_gate 70
- csi_ahb_gate 71
- brom_ahb_gate 72
- ata_ahb_gate 73
- wdog_ipg_gate 74
- usb_ipg_gate 75
- uart6_ipg_gate 76
- uart5_ipg_gate 77
- uart4_ipg_gate 78
- uart3_ipg_gate 79
- uart2_ipg_gate 80
- uart1_ipg_gate 81
- ckih_div1p5 82
- fpm 83
- mpll_osc_sel 84
- mpll_sel 85
- spll_gate 86
- mshc_div 87
- rtic_ipg_gate 88
- mshc_ipg_gate 89
- rtic_ahb_gate 90
- mshc_baud_gate 91
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
+for the full list of i.MX27 clock IDs.
Examples:
+ clks: ccm@10027000{
+ compatible = "fsl,imx27-ccm";
+ reg = <0x10027000 0x1000>;
+ #clock-cells = <1>;
+ };
-clks: ccm@10027000{
- compatible = "fsl,imx27-ccm";
- reg = <0x10027000 0x1000>;
- #clock-cells = <1>;
-};
-
-uart1: serial@1000a000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1000a000 0x1000>;
- interrupts = <20>;
- clocks = <&clks 81>, <&clks 61>;
- clock-names = "ipg", "per";
- status = "disabled";
-};
+ uart1: serial@1000a000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1000a000 0x1000>;
+ interrupts = <20>;
+ clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 90ec91f..9252912 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -7,223 +7,13 @@
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX6Q
-clocks and IDs.
-
- Clock ID
- ---------------------------
- dummy 0
- ckil 1
- ckih 2
- osc 3
- pll2_pfd0_352m 4
- pll2_pfd1_594m 5
- pll2_pfd2_396m 6
- pll3_pfd0_720m 7
- pll3_pfd1_540m 8
- pll3_pfd2_508m 9
- pll3_pfd3_454m 10
- pll2_198m 11
- pll3_120m 12
- pll3_80m 13
- pll3_60m 14
- twd 15
- step 16
- pll1_sw 17
- periph_pre 18
- periph2_pre 19
- periph_clk2_sel 20
- periph2_clk2_sel 21
- axi_sel 22
- esai_sel 23
- asrc_sel 24
- spdif_sel 25
- gpu2d_axi 26
- gpu3d_axi 27
- gpu2d_core_sel 28
- gpu3d_core_sel 29
- gpu3d_shader_sel 30
- ipu1_sel 31
- ipu2_sel 32
- ldb_di0_sel 33
- ldb_di1_sel 34
- ipu1_di0_pre_sel 35
- ipu1_di1_pre_sel 36
- ipu2_di0_pre_sel 37
- ipu2_di1_pre_sel 38
- ipu1_di0_sel 39
- ipu1_di1_sel 40
- ipu2_di0_sel 41
- ipu2_di1_sel 42
- hsi_tx_sel 43
- pcie_axi_sel 44
- ssi1_sel 45
- ssi2_sel 46
- ssi3_sel 47
- usdhc1_sel 48
- usdhc2_sel 49
- usdhc3_sel 50
- usdhc4_sel 51
- enfc_sel 52
- emi_sel 53
- emi_slow_sel 54
- vdo_axi_sel 55
- vpu_axi_sel 56
- cko1_sel 57
- periph 58
- periph2 59
- periph_clk2 60
- periph2_clk2 61
- ipg 62
- ipg_per 63
- esai_pred 64
- esai_podf 65
- asrc_pred 66
- asrc_podf 67
- spdif_pred 68
- spdif_podf 69
- can_root 70
- ecspi_root 71
- gpu2d_core_podf 72
- gpu3d_core_podf 73
- gpu3d_shader 74
- ipu1_podf 75
- ipu2_podf 76
- ldb_di0_podf 77
- ldb_di1_podf 78
- ipu1_di0_pre 79
- ipu1_di1_pre 80
- ipu2_di0_pre 81
- ipu2_di1_pre 82
- hsi_tx_podf 83
- ssi1_pred 84
- ssi1_podf 85
- ssi2_pred 86
- ssi2_podf 87
- ssi3_pred 88
- ssi3_podf 89
- uart_serial_podf 90
- usdhc1_podf 91
- usdhc2_podf 92
- usdhc3_podf 93
- usdhc4_podf 94
- enfc_pred 95
- enfc_podf 96
- emi_podf 97
- emi_slow_podf 98
- vpu_axi_podf 99
- cko1_podf 100
- axi 101
- mmdc_ch0_axi_podf 102
- mmdc_ch1_axi_podf 103
- arm 104
- ahb 105
- apbh_dma 106
- asrc 107
- can1_ipg 108
- can1_serial 109
- can2_ipg 110
- can2_serial 111
- ecspi1 112
- ecspi2 113
- ecspi3 114
- ecspi4 115
- ecspi5 116
- enet 117
- esai 118
- gpt_ipg 119
- gpt_ipg_per 120
- gpu2d_core 121
- gpu3d_core 122
- hdmi_iahb 123
- hdmi_isfr 124
- i2c1 125
- i2c2 126
- i2c3 127
- iim 128
- enfc 129
- ipu1 130
- ipu1_di0 131
- ipu1_di1 132
- ipu2 133
- ipu2_di0 134
- ldb_di0 135
- ldb_di1 136
- ipu2_di1 137
- hsi_tx 138
- mlb 139
- mmdc_ch0_axi 140
- mmdc_ch1_axi 141
- ocram 142
- openvg_axi 143
- pcie_axi 144
- pwm1 145
- pwm2 146
- pwm3 147
- pwm4 148
- per1_bch 149
- gpmi_bch_apb 150
- gpmi_bch 151
- gpmi_io 152
- gpmi_apb 153
- sata 154
- sdma 155
- spba 156
- ssi1 157
- ssi2 158
- ssi3 159
- uart_ipg 160
- uart_serial 161
- usboh3 162
- usdhc1 163
- usdhc2 164
- usdhc3 165
- usdhc4 166
- vdo_axi 167
- vpu_axi 168
- cko1 169
- pll1_sys 170
- pll2_bus 171
- pll3_usb_otg 172
- pll4_audio 173
- pll5_video 174
- pll8_mlb 175
- pll7_usb_host 176
- pll6_enet 177
- ssi1_ipg 178
- ssi2_ipg 179
- ssi3_ipg 180
- rom 181
- usbphy1 182
- usbphy2 183
- ldb_di0_div_3_5 184
- ldb_di1_div_3_5 185
- sata_ref 186
- sata_ref_100m 187
- pcie_ref 188
- pcie_ref_125m 189
- enet_ref 190
- usbphy1_gate 191
- usbphy2_gate 192
- pll4_post_div 193
- pll5_post_div 194
- pll5_video_div 195
- eim_slow 196
- spdif 197
- cko2_sel 198
- cko2_podf 199
- cko2 200
- cko 201
- vdoa 202
- pll4_audio_div 203
- lvds1_sel 204
- lvds2_sel 205
- lvds1_gate 206
- lvds2_gate 207
- esai_ahb 208
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
+for the full list of i.MX6 Quad and DualLite clock IDs.
Examples:
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
clks: ccm@020c4000 {
compatible = "fsl,imx6q-ccm";
reg = <0x020c4000 0x4000>;
@@ -235,7 +25,7 @@
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 0x04>;
- clocks = <&clks 160>, <&clks 161>;
+ clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
index f055515..366690c 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
@@ -8,10 +8,12 @@
under node /cpus/cpu@0.
Required properties:
-- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
- for details
+- None
Optional properties:
+- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for
+ details. OPPs *must* be supplied either via DT, i.e. this property, or
+ populated at runtime.
- clock-latency: Specify the possible maximum transition latency for clock,
in unit of nanoseconds.
- voltage-tolerance: Specify the CPU voltage tolerance in percentage.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c1b9aa8..b7fa2f5 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2790,6 +2790,12 @@
leaf rcu_node structure. Useful for very large
systems.
+ rcutree.jiffies_till_sched_qs= [KNL]
+ Set required age in jiffies for a
+ given grace period before RCU starts
+ soliciting quiescent-state help from
+ rcu_note_context_switch().
+
rcutree.jiffies_till_first_fqs= [KNL]
Set delay from grace-period initialization to
first attempt to force quiescent states.
@@ -3526,7 +3532,7 @@
the allocated input device; If set to 0, video driver
will only send out the event without touching backlight
brightness level.
- default: 0
+ default: 1
virtio_mmio.device=
[VMMIO] Memory mapped virtio (platform) device.
diff --git a/MAINTAINERS b/MAINTAINERS
index e31c874..61a8f48 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -156,7 +156,6 @@
8169 10/100/1000 GIGABIT ETHERNET DRIVER
M: Realtek linux nic maintainers <nic_swsd@realtek.com>
-M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/realtek/r8169.c
@@ -4511,8 +4510,7 @@
F: drivers/idle/i7300_idle.c
IEEE 802.15.4 SUBSYSTEM
-M: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
-M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+M: Alexander Aring <alex.aring@gmail.com>
L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://apps.sourceforge.net/trac/linux-zigbee
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
diff --git a/Makefile b/Makefile
index f3c543d..6b27741 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 16
SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = Shuffling Zombie Juror
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 756711f..f505f9e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -6,6 +6,7 @@
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_MIGHT_HAVE_PC_PARPORT
+ select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_USE_BUILTIN_BSWAP
select ARCH_USE_CMPXCHG_LOCKREF
select ARCH_WANT_IPC_PARSE_VERSION
@@ -528,21 +529,6 @@
help
Support for the Marvell Dove SoC 88AP510
-config ARCH_KIRKWOOD
- bool "Marvell Kirkwood"
- select ARCH_REQUIRE_GPIOLIB
- select CPU_FEROCEON
- select GENERIC_CLOCKEVENTS
- select MVEBU_MBUS
- select PCI
- select PCI_QUIRKS
- select PINCTRL
- select PINCTRL_KIRKWOOD
- select PLAT_ORION_LEGACY
- help
- Support for the following Marvell Kirkwood series SoCs:
- 88F6180, 88F6192 and 88F6281.
-
config ARCH_MV78XX0
bool "Marvell MV78xx0"
select ARCH_REQUIRE_GPIOLIB
@@ -896,8 +882,6 @@
source "arch/arm/mach-keystone/Kconfig"
-source "arch/arm/mach-kirkwood/Kconfig"
-
source "arch/arm/mach-ks8695/Kconfig"
source "arch/arm/mach-msm/Kconfig"
@@ -908,6 +892,8 @@
source "arch/arm/mach-imx/Kconfig"
+source "arch/arm/mach-mediatek/Kconfig"
+
source "arch/arm/mach-mxs/Kconfig"
source "arch/arm/mach-netx/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 8698fa1..640770c 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -707,6 +707,14 @@
Say Y here if you want kernel low-level debugging support
on Allwinner A1X based platforms on the UART1.
+ config DEBUG_SUNXI_R_UART
+ bool "Kernel low-level debugging messages via sunXi R_UART"
+ depends on MACH_SUN6I || MACH_SUN8I
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Allwinner A31/A23 based platforms on the R_UART.
+
config TEGRA_DEBUG_UART_AUTO_ODMDATA
bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
depends on ARCH_TEGRA
@@ -1029,7 +1037,7 @@
def_bool ARCH_DOVE || ARCH_EBSA110 || \
(FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
- ARCH_IOP33X || ARCH_IXP4XX || ARCH_KIRKWOOD || \
+ ARCH_IOP33X || ARCH_IXP4XX || \
ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
config DEBUG_UART_PHYS
@@ -1039,6 +1047,7 @@
default 0x01c28400 if DEBUG_SUNXI_UART1
default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2
+ default 0x01f02800 if DEBUG_SUNXI_R_UART
default 0x02530c00 if DEBUG_KEYSTONE_UART0
default 0x02531000 if DEBUG_KEYSTONE_UART1
default 0x03010fe0 if ARCH_RPC
@@ -1085,7 +1094,7 @@
default 0xe0000000 if ARCH_SPEAR13XX
default 0xf0000be0 if ARCH_EBSA110
default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE
- default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
+ default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
ARCH_ORION5X
default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8b00000 if DEBUG_HI3716_UART
@@ -1114,6 +1123,7 @@
default 0xf1600000 if ARCH_INTEGRATOR
default 0xf1c28000 if DEBUG_SUNXI_UART0
default 0xf1c28400 if DEBUG_SUNXI_UART1
+ default 0xf1f02800 if DEBUG_SUNXI_R_UART
default 0xf2100000 if DEBUG_PXA_UART1
default 0xf4090000 if ARCH_LPC32XX
default 0xf4200000 if ARCH_GEMINI
@@ -1150,7 +1160,6 @@
default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
- default 0xfed12000 if ARCH_KIRKWOOD
default 0xfed60000 if DEBUG_RK29_UART0
default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c133061..a1e21e8 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -163,7 +163,6 @@
machine-$(CONFIG_ARCH_IOP33X) += iop33x
machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
-machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood
machine-$(CONFIG_ARCH_KS8695) += ks8695
machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
machine-$(CONFIG_ARCH_MMP) += mmp
@@ -172,6 +171,7 @@
machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
machine-$(CONFIG_ARCH_MVEBU) += mvebu
machine-$(CONFIG_ARCH_MXC) += imx
+machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
machine-$(CONFIG_ARCH_MXS) += mxs
machine-$(CONFIG_ARCH_NETX) += netx
machine-$(CONFIG_ARCH_NOMADIK) += nomadik
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 26775c9..3c08b79 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -90,8 +90,7 @@
dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \
k2l-evm.dtb \
k2e-evm.dtb
-kirkwood := \
- kirkwood-b3.dtb \
+dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
kirkwood-cloudbox.dtb \
kirkwood-db-88f6281.dtb \
kirkwood-db-88f6282.dtb \
@@ -150,8 +149,6 @@
kirkwood-ts219-6282.dtb \
kirkwood-ts419-6281.dtb \
kirkwood-ts419-6282.dtb
-dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood)
-dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood)
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
@@ -332,7 +329,6 @@
r8a7778-bockw-reference.dtb \
r8a7740-armadillo800eva-reference.dtb \
r8a7779-marzen.dtb \
- r8a7779-marzen-reference.dtb \
r8a7791-koelsch.dtb \
r8a7790-lager.dtb \
sh73a0-kzm9g.dtb \
@@ -344,7 +340,8 @@
r7s72100-genmai.dtb \
r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
- r8a7790-lager.dtb
+ r8a7790-lager.dtb \
+ r8a7779-marzen.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_sockit.dtb \
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 4a4e02d..3a0a161 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -347,6 +347,15 @@
status = "disabled";
};
+ mailbox: mailbox@480C8000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x480C8000 0x200>;
+ interrupts = <77>;
+ ti,hwmods = "mailbox";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <8>;
+ };
+
timer1: timer@44e31000 {
compatible = "ti,am335x-timer-1ms";
reg = <0x44e31000 0x400>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 49fa596..c9aee0e 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -168,9 +168,6 @@
ti,hwmods = "mailbox";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <8>;
- ti,mbox-names = "wkup_m3";
- ti,mbox-data = <0 0 0 0>;
- status = "disabled";
};
timer1: timer@44e31000 {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 2877959..b84bac5 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -925,7 +925,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x00100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
+ clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
<&uhpck>;
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 2ebc421..2c0d6ea 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -1124,6 +1124,7 @@
compatible = "atmel,at91sam9rl-pwm";
reg = <0xf8034000 0x300>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+ clocks = <&pwm_clk>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -1155,8 +1156,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
- <&uhpck>;
+ clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 8012763..0686b1e 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -338,6 +338,123 @@
status = "disabled";
};
+ mailbox1: mailbox@4a0f4000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x4a0f4000 0x200>;
+ ti,hwmods = "mailbox1";
+ ti,mbox-num-users = <3>;
+ ti,mbox-num-fifos = <8>;
+ status = "disabled";
+ };
+
+ mailbox2: mailbox@4883a000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x4883a000 0x200>;
+ ti,hwmods = "mailbox2";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox3: mailbox@4883c000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x4883c000 0x200>;
+ ti,hwmods = "mailbox3";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox4: mailbox@4883e000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x4883e000 0x200>;
+ ti,hwmods = "mailbox4";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox5: mailbox@48840000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x48840000 0x200>;
+ ti,hwmods = "mailbox5";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox6: mailbox@48842000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x48842000 0x200>;
+ ti,hwmods = "mailbox6";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox7: mailbox@48844000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x48844000 0x200>;
+ ti,hwmods = "mailbox7";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox8: mailbox@48846000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x48846000 0x200>;
+ ti,hwmods = "mailbox8";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox9: mailbox@4885e000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x4885e000 0x200>;
+ ti,hwmods = "mailbox9";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox10: mailbox@48860000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x48860000 0x200>;
+ ti,hwmods = "mailbox10";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox11: mailbox@48862000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x48862000 0x200>;
+ ti,hwmods = "mailbox11";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox12: mailbox@48864000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x48864000 0x200>;
+ ti,hwmods = "mailbox12";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
+ mailbox13: mailbox@48802000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x48802000 0x200>;
+ ti,hwmods = "mailbox13";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ status = "disabled";
+ };
+
timer1: timer@4ae18000 {
compatible = "ti,omap5430-timer";
reg = <0x4ae18000 0x80>;
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index e37985f..00eeed3 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -31,11 +31,13 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ clock-frequency = <533000000>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ clock-frequency = <533000000>;
};
};
diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mt6589-aquaris5.dts
new file mode 100644
index 0000000..443b446
--- /dev/null
+++ b/arch/arm/boot/dts/mt6589-aquaris5.dts
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt6589.dtsi"
+
+/ {
+ model = "bq Aquaris5";
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi
new file mode 100644
index 0000000..d0297a0
--- /dev/null
+++ b/arch/arm/boot/dts/mt6589.dtsi
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "mediatek,mt6589";
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ };
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x3>;
+ };
+
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ system_clk: dummy13m {
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ #clock-cells = <0>;
+ };
+
+ rtc_clk: dummy32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ timer: timer@10008000 {
+ compatible = "mediatek,mt6577-timer";
+ reg = <0x10008000 0x80>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&system_clk>, <&rtc_clk>;
+ clock-names = "system-clk", "rtc-clk";
+ };
+
+ gic: interrupt-controller@10212000 {
+ compatible = "arm,cortex-a15-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x10211000 0x1000>,
+ <0x10212000 0x1000>,
+ <0x10214000 0x2000>,
+ <0x10216000 0x2000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index e83b046..6d21994 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -157,6 +157,8 @@
interrupts = <26>, <34>;
interrupt-names = "dsp", "iva";
ti,hwmods = "mailbox";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <6>;
};
timer1: timer@48028000 {
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index c4e8013..aa6a354 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -247,6 +247,8 @@
reg = <0x48094000 0x200>;
interrupts = <26>;
ti,hwmods = "mailbox";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <6>;
};
timer1: timer@49018000 {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index b2891a9..575a49b 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -332,6 +332,8 @@
ti,hwmods = "mailbox";
reg = <0x48094000 0x200>;
interrupts = <26>;
+ ti,mbox-num-users = <2>;
+ ti,mbox-num-fifos = <2>;
};
mcspi1: spi@48098000 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 7e26d22..69408b5 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -649,6 +649,15 @@
};
};
+ mailbox: mailbox@4a0f4000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x4a0f4000 0x200>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mailbox";
+ ti,mbox-num-users = <3>;
+ ti,mbox-num-fifos = <8>;
+ };
+
timer1: timer@4a318000 {
compatible = "ti,omap3430-timer";
reg = <0x4a318000 0x80>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index a4ed549..cbf6a17 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -640,6 +640,8 @@
reg = <0x4a0f4000 0x200>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox";
+ ti,mbox-num-users = <3>;
+ ti,mbox-num-fifos = <8>;
};
timer1: timer@4ae18000 {
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index f50fbc8..bdee225 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -144,6 +144,7 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ clock-frequency = <400000000>;
};
};
diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
deleted file mode 100644
index b27c637..0000000
--- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Reference Device Tree Source for the Marzen board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7779.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "marzen";
- compatible = "renesas,marzen-reference", "renesas,r8a7779";
-
- chosen {
- bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on rw";
- };
-
- memory {
- device_type = "memory";
- reg = <0x60000000 0x40000000>;
- };
-
- fixedregulator3v3: fixedregulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- lan0@18000000 {
- compatible = "smsc,lan9220", "smsc,lan9115";
- reg = <0x18000000 0x100>;
- pinctrl-0 = <&lan0_pins>;
- pinctrl-names = "default";
-
- phy-mode = "mii";
- interrupt-parent = <&irqpin0>;
- interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
- smsc,irq-push-pull;
- reg-io-width = <4>;
- vddvario-supply = <&fixedregulator3v3>;
- vdd33a-supply = <&fixedregulator3v3>;
- };
-
- leds {
- compatible = "gpio-leds";
- led2 {
- gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
- };
- led3 {
- gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
- };
- led4 {
- gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&irqpin0 {
- status = "okay";
-};
-
-&pfc {
- pinctrl-0 = <&scif2_pins &scif4_pins>;
- pinctrl-names = "default";
-
- lan0_pins: lan0 {
- intc {
- renesas,groups = "intc_irq1_b";
- renesas,function = "intc";
- };
- lbsc {
- renesas,groups = "lbsc_ex_cs0";
- renesas,function = "lbsc";
- };
- };
-
- scif2_pins: serial2 {
- renesas,groups = "scif2_data_c";
- renesas,function = "scif2";
- };
-
- scif4_pins: serial4 {
- renesas,groups = "scif4_data";
- renesas,function = "scif4";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
- renesas,function = "sdhi0";
- };
-
- hspi0_pins: hspi0 {
- renesas,groups = "hspi0";
- renesas,function = "hspi0";
- };
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&fixedregulator3v3>;
- bus-width = <4>;
- status = "okay";
-};
-
-&hspi0 {
- pinctrl-0 = <&hspi0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index a7af2c2..5745555 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -11,17 +11,131 @@
/dts-v1/;
#include "r8a7779.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "marzen";
compatible = "renesas,marzen", "renesas,r8a7779";
+ aliases {
+ serial2 = &scif2;
+ serial4 = &scif4;
+ };
+
chosen {
- bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on";
+ bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on";
};
memory {
device_type = "memory";
reg = <0x60000000 0x40000000>;
};
+
+ fixedregulator3v3: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ lan0@18000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x18000000 0x100>;
+ pinctrl-0 = <&lan0_pins>;
+ pinctrl-names = "default";
+
+ phy-mode = "mii";
+ interrupt-parent = <&irqpin0>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ smsc,irq-push-pull;
+ reg-io-width = <4>;
+ vddvario-supply = <&fixedregulator3v3>;
+ vdd33a-supply = <&fixedregulator3v3>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led2 {
+ gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ };
+ led3 {
+ gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+ };
+ led4 {
+ gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&irqpin0 {
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <31250000>;
+};
+
+&pfc {
+ lan0_pins: lan0 {
+ intc {
+ renesas,groups = "intc_irq1_b";
+ renesas,function = "intc";
+ };
+ lbsc {
+ renesas,groups = "lbsc_ex_cs0";
+ renesas,function = "lbsc";
+ };
+ };
+
+ scif2_pins: serial2 {
+ renesas,groups = "scif2_data_c";
+ renesas,function = "scif2";
+ };
+
+ scif4_pins: serial4 {
+ renesas,groups = "scif4_data";
+ renesas,function = "scif4";
+ };
+
+ sdhi0_pins: sd0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+ renesas,function = "sdhi0";
+ };
+
+ hspi0_pins: hspi0 {
+ renesas,groups = "hspi0";
+ renesas,function = "hspi0";
+ };
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scif4 {
+ pinctrl-0 = <&scif4_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&fixedregulator3v3>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&hspi0 {
+ pinctrl-0 = <&hspi0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index b517c8e..94e2fc8 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -11,6 +11,7 @@
/include/ "skeleton.dtsi"
+#include <dt-bindings/clock/r8a7779-clock.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -25,21 +26,25 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ clock-frequency = <1000000000>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ clock-frequency = <1000000000>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
+ clock-frequency = <1000000000>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
+ clock-frequency = <1000000000>;
};
};
@@ -157,6 +162,7 @@
compatible = "renesas,i2c-r8a7779";
reg = <0xffc70000 0x1000>;
interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
status = "disabled";
};
@@ -166,6 +172,7 @@
compatible = "renesas,i2c-r8a7779";
reg = <0xffc71000 0x1000>;
interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
status = "disabled";
};
@@ -175,6 +182,7 @@
compatible = "renesas,i2c-r8a7779";
reg = <0xffc72000 0x1000>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
status = "disabled";
};
@@ -184,6 +192,67 @@
compatible = "renesas,i2c-r8a7779";
reg = <0xffc73000 0x1000>;
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
+ status = "disabled";
+ };
+
+ scif0: serial@ffe40000 {
+ compatible = "renesas,scif-r8a7779", "renesas,scif";
+ reg = <0xffe40000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif1: serial@ffe41000 {
+ compatible = "renesas,scif-r8a7779", "renesas,scif";
+ reg = <0xffe41000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif2: serial@ffe42000 {
+ compatible = "renesas,scif-r8a7779", "renesas,scif";
+ reg = <0xffe42000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif3: serial@ffe43000 {
+ compatible = "renesas,scif-r8a7779", "renesas,scif";
+ reg = <0xffe43000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif4: serial@ffe44000 {
+ compatible = "renesas,scif-r8a7779", "renesas,scif";
+ reg = <0xffe44000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif5: serial@ffe45000 {
+ compatible = "renesas,scif-r8a7779", "renesas,scif";
+ reg = <0xffe45000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -201,12 +270,14 @@
compatible = "renesas,rcar-sata";
reg = <0xfc600000 0x2000>;
interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7779_CLK_SATA>;
};
sdhi0: sd@ffe4c000 {
compatible = "renesas,sdhi-r8a7779";
reg = <0xffe4c000 0x100>;
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -216,6 +287,7 @@
compatible = "renesas,sdhi-r8a7779";
reg = <0xffe4d000 0x100>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -225,6 +297,7 @@
compatible = "renesas,sdhi-r8a7779";
reg = <0xffe4e000 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -234,6 +307,7 @@
compatible = "renesas,sdhi-r8a7779";
reg = <0xffe4f000 0x100>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -245,6 +319,7 @@
interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
status = "disabled";
};
@@ -254,6 +329,7 @@
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
status = "disabled";
};
@@ -263,6 +339,150 @@
interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
status = "disabled";
};
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* External root clock */
+ extal_clk: extal_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overriden by the board. */
+ clock-frequency = <0>;
+ clock-output-names = "extal";
+ };
+
+ /* Special CPG clocks */
+ cpg_clocks: clocks@ffc80000 {
+ compatible = "renesas,r8a7779-cpg-clocks";
+ reg = <0xffc80000 0x30>;
+ clocks = <&extal_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "plla", "z", "zs", "s",
+ "s1", "p", "b", "out";
+ };
+
+ /* Fixed factor clocks */
+ i_clk: i_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "i";
+ };
+ s3_clk: s3_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "s3";
+ };
+ s4_clk: s4_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
+ #clock-cells = <0>;
+ clock-div = <16>;
+ clock-mult = <1>;
+ clock-output-names = "s4";
+ };
+ g_clk: g_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
+ #clock-cells = <0>;
+ clock-div = <24>;
+ clock-mult = <1>;
+ clock-output-names = "g";
+ };
+
+ /* Gate clocks */
+ mstp0_clks: clocks@ffc80030 {
+ compatible = "renesas,r8a7779-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0xffc80030 4>;
+ clocks = <&cpg_clocks R8A7779_CLK_S>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_S>,
+ <&cpg_clocks R8A7779_CLK_S>,
+ <&cpg_clocks R8A7779_CLK_S1>,
+ <&cpg_clocks R8A7779_CLK_S1>,
+ <&cpg_clocks R8A7779_CLK_S1>,
+ <&cpg_clocks R8A7779_CLK_S1>,
+ <&cpg_clocks R8A7779_CLK_S1>,
+ <&cpg_clocks R8A7779_CLK_S1>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7779_CLK_HSPI R8A7779_CLK_TMU2
+ R8A7779_CLK_TMU1 R8A7779_CLK_TMU0
+ R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0
+ R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4
+ R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2
+ R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0
+ R8A7779_CLK_I2C3 R8A7779_CLK_I2C2
+ R8A7779_CLK_I2C1 R8A7779_CLK_I2C0
+ >;
+ clock-output-names =
+ "hspi", "tmu2", "tmu1", "tmu0", "hscif1",
+ "hscif0", "scif5", "scif4", "scif3", "scif2",
+ "scif1", "scif0", "i2c3", "i2c2", "i2c1",
+ "i2c0";
+ };
+ mstp1_clks: clocks@ffc80034 {
+ compatible = "renesas,r8a7779-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0xffc80034 4>, <0xffc80044 4>;
+ clocks = <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_S>,
+ <&cpg_clocks R8A7779_CLK_S>,
+ <&cpg_clocks R8A7779_CLK_S>,
+ <&cpg_clocks R8A7779_CLK_S>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_S>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7779_CLK_USB01 R8A7779_CLK_USB2
+ R8A7779_CLK_DU R8A7779_CLK_VIN2
+ R8A7779_CLK_VIN1 R8A7779_CLK_VIN0
+ R8A7779_CLK_ETHER R8A7779_CLK_SATA
+ R8A7779_CLK_PCIE R8A7779_CLK_VIN3
+ >;
+ clock-output-names =
+ "usb01", "usb2",
+ "du", "vin2",
+ "vin1", "vin0",
+ "ether", "sata",
+ "pcie", "vin3";
+ };
+ mstp3_clks: clocks@ffc8003c {
+ compatible = "renesas,r8a7779-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0xffc8003c 4>;
+ clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>,
+ <&s4_clk>, <&s4_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2
+ R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0
+ R8A7779_CLK_MMC1 R8A7779_CLK_MMC0
+ >;
+ clock-output-names =
+ "sdhi3", "sdhi2", "sdhi1", "sdhi0",
+ "mmc1", "mmc0";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index e01e5a0..36c771a 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -19,6 +19,41 @@
reg = <0x0 0x08000000>;
};
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ core-module@10000000 {
+ compatible = "arm,core-module-versatile", "syscon";
+ reg = <0x10000000 0x200>;
+
+ /* OSC1 on AB, OSC4 on PB */
+ osc1: cm_aux_osc@24M {
+ #clock-cells = <0>;
+ compatible = "arm,versatile-cm-auxosc";
+ clocks = <&xtal24mhz>;
+ };
+
+ /* The timer clock is the 24 MHz oscillator divided to 1MHz */
+ timclk: timclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <24>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ pclk: pclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+ };
+
flash@34000000 {
compatible = "arm,versatile-flash";
reg = <0x34000000 0x4000000>;
@@ -59,6 +94,8 @@
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x10140000 0x1000>;
+ clear-mask = <0xffffffff>;
+ valid-mask = <0xffffffff>;
};
sic: intc@10003000 {
@@ -68,69 +105,93 @@
reg = <0x10003000 0x1000>;
interrupt-parent = <&vic>;
interrupts = <31>; /* Cascaded to vic */
+ clear-mask = <0xffffffff>;
+ valid-mask = <0xffc203f8>;
};
dma@10130000 {
compatible = "arm,pl081", "arm,primecell";
reg = <0x10130000 0x1000>;
interrupts = <17>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
uart0: uart@101f1000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x101f1000 0x1000>;
interrupts = <12>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
uart1: uart@101f2000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x101f2000 0x1000>;
interrupts = <13>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
uart2: uart@101f3000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x101f3000 0x1000>;
interrupts = <14>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
smc@10100000 {
compatible = "arm,primecell";
reg = <0x10100000 0x1000>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
mpmc@10110000 {
compatible = "arm,primecell";
reg = <0x10110000 0x1000>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
display@10120000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0x10120000 0x1000>;
interrupts = <16>;
+ clocks = <&osc1>, <&pclk>;
+ clock-names = "clcd", "apb_pclk";
};
sctl@101e0000 {
compatible = "arm,primecell";
reg = <0x101e0000 0x1000>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
watchdog@101e1000 {
compatible = "arm,primecell";
reg = <0x101e1000 0x1000>;
interrupts = <0>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
timer@101e2000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x101e2000 0x1000>;
interrupts = <4>;
+ clocks = <&timclk>, <&timclk>, <&pclk>;
+ clock-names = "timer0", "timer1", "apb_pclk";
};
timer@101e3000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x101e3000 0x1000>;
interrupts = <5>;
+ clocks = <&timclk>, <&timclk>, <&pclk>;
+ clock-names = "timer0", "timer1", "apb_pclk";
};
gpio0: gpio@101e4000 {
@@ -141,6 +202,8 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
gpio1: gpio@101e5000 {
@@ -151,24 +214,32 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
rtc@101e8000 {
compatible = "arm,pl030", "arm,primecell";
reg = <0x101e8000 0x1000>;
interrupts = <10>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
sci@101f0000 {
compatible = "arm,primecell";
reg = <0x101f0000 0x1000>;
interrupts = <15>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
ssp@101f4000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x101f4000 0x1000>;
interrupts = <11>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "SSPCLK", "apb_pclk";
};
fpga {
@@ -181,23 +252,31 @@
compatible = "arm,primecell";
reg = <0x4000 0x1000>;
interrupts = <24>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
mmc@5000 {
- compatible = "arm,primecell";
+ compatible = "arm,pl180", "arm,primecell";
reg = < 0x5000 0x1000>;
interrupts-extended = <&vic 22 &sic 2>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
};
kmi@6000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x6000 0x1000>;
interrupt-parent = <&sic>;
interrupts = <3>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
};
kmi@7000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x7000 0x1000>;
interrupt-parent = <&sic>;
interrupts = <4>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
};
};
};
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index 65f6577..d025048 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -13,6 +13,8 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
gpio3: gpio@101e7000 {
@@ -23,6 +25,8 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
fpga {
@@ -31,17 +35,23 @@
reg = <0x9000 0x1000>;
interrupt-parent = <&sic>;
interrupts = <6>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
sci@a000 {
compatible = "arm,primecell";
reg = <0xa000 0x1000>;
interrupt-parent = <&sic>;
interrupts = <5>;
+ clocks = <&xtal24mhz>;
+ clock-names = "apb_pclk";
};
mmc@b000 {
- compatible = "arm,primecell";
+ compatible = "arm,pl180", "arm,primecell";
reg = <0xb000 0x1000>;
interrupts-extended = <&vic 23 &sic 2>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
};
};
};
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index fd6bff0..1921132 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -233,13 +233,13 @@
if (IS_ERR(clk1))
clk1 = NULL;
- /* Get the 2nd clock if the timer has 2 timer clocks */
+ /* Get the 2nd clock if the timer has 3 timer clocks */
if (of_count_phandle_with_args(np, "clocks", "#clock-cells") == 3) {
clk2 = of_clk_get(np, 1);
if (IS_ERR(clk2)) {
pr_err("sp804: %s clock not found: %d\n", np->name,
(int)PTR_ERR(clk2));
- goto err;
+ clk2 = NULL;
}
} else
clk2 = clk1;
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index bada59d..63bde0e 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -1,6 +1,7 @@
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
@@ -35,10 +36,8 @@
CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27_VISSTRIM_M10=y
-CONFIG_MACH_IMX27LITE=y
CONFIG_MACH_PCA100=y
CONFIG_MACH_MXT_TD60=y
-CONFIG_MACH_IMX27IPCAM=y
CONFIG_MACH_IMX27_DT=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
@@ -159,6 +158,8 @@
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 59b7e45..16cfec4 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -1,5 +1,6 @@
CONFIG_KERNEL_LZO=y
CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=18
@@ -31,11 +32,12 @@
CONFIG_MACH_PCM043=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_VPR200=y
-CONFIG_MACH_IMX51_DT=y
+CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX50=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
CONFIG_SOC_VF610=y
CONFIG_PCI=y
CONFIG_PCI_IMX6=y
@@ -67,6 +69,8 @@
# CONFIG_INET_LRO is not set
CONFIG_IPV6=y
CONFIG_NETFILTER=y
+CONFIG_CAN=y
+CONFIG_CAN_FLEXCAN=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_RFKILL=y
@@ -160,6 +164,7 @@
CONFIG_SPI_IMX=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MC9S08DZ60=y
+CONFIG_GPIO_STMPE=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
@@ -242,6 +247,7 @@
CONFIG_DMADEVICES=y
CONFIG_IMX_SDMA=y
CONFIG_MXS_DMA=y
+CONFIG_FSL_EDMA=y
CONFIG_STAGING=y
CONFIG_DRM_IMX=y
CONFIG_DRM_IMX_FB_HELPER=y
@@ -288,6 +294,7 @@
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 5348364..f70ea21 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -27,7 +27,7 @@
CONFIG_ARCH_HI3xxx=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARCH_MXC=y
-CONFIG_MACH_IMX51_DT=y
+CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index a9f9923..c7906c2 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -1,4 +1,5 @@
CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_TASKSTATS=y
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index 9d85318..e35d880 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -275,7 +275,7 @@
cpu_topology[cpuid].socket_id, mpidr);
}
-static inline const int cpu_corepower_flags(void)
+static inline int cpu_corepower_flags(void)
{
return SD_SHARE_PKG_RESOURCES | SD_SHARE_POWERDOMAIN;
}
diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c
index 5306de3..312d43e 100644
--- a/arch/arm/lib/delay.c
+++ b/arch/arm/lib/delay.c
@@ -19,6 +19,7 @@
* Author: Will Deacon <will.deacon@arm.com>
*/
+#include <linux/clocksource.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -36,6 +37,7 @@
static const struct delay_timer *delay_timer;
static bool delay_calibrated;
+static u64 delay_res;
int read_current_timer(unsigned long *timer_val)
{
@@ -47,6 +49,11 @@
}
EXPORT_SYMBOL_GPL(read_current_timer);
+static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
+{
+ return (cyc * mult) >> shift;
+}
+
static void __timer_delay(unsigned long cycles)
{
cycles_t start = get_cycles();
@@ -69,18 +76,24 @@
void __init register_current_timer_delay(const struct delay_timer *timer)
{
- if (!delay_calibrated) {
- pr_info("Switching to timer-based delay loop\n");
+ u32 new_mult, new_shift;
+ u64 res;
+
+ clocks_calc_mult_shift(&new_mult, &new_shift, timer->freq,
+ NSEC_PER_SEC, 3600);
+ res = cyc_to_ns(1ULL, new_mult, new_shift);
+
+ if (!delay_calibrated && (!delay_res || (res < delay_res))) {
+ pr_info("Switching to timer-based delay loop, resolution %lluns\n", res);
delay_timer = timer;
lpj_fine = timer->freq / HZ;
+ delay_res = res;
/* cpufreq may scale loops_per_jiffy, so keep a private copy */
arm_delay_ops.ticks_per_jiffy = lpj_fine;
arm_delay_ops.delay = __timer_delay;
arm_delay_ops.const_udelay = __timer_const_udelay;
arm_delay_ops.udelay = __timer_udelay;
-
- delay_calibrated = true;
} else {
pr_info("Ignoring duplicate/late registration of read_current_timer delay\n");
}
@@ -91,3 +104,8 @@
delay_calibrated = true;
return lpj_fine;
}
+
+void calibration_delay_done(void)
+{
+ delay_calibrated = true;
+}
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index 2631cfc..24f85be 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -13,7 +13,9 @@
bool "Marvell Armada 1500 (BG2)"
select CACHE_L2X0
select CPU_PJ4B
+ select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
+ select HAVE_SMP
select PINCTRL_BERLIN_BG2
config MACH_BERLIN_BG2CD
@@ -25,6 +27,7 @@
config MACH_BERLIN_BG2Q
bool "Marvell Armada 1500 Pro (BG2-Q)"
select CACHE_L2X0
+ select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select PINCTRL_BERLIN_BG2Q
diff --git a/arch/arm/mach-berlin/Makefile b/arch/arm/mach-berlin/Makefile
index ab69fe9..c0719ec 100644
--- a/arch/arm/mach-berlin/Makefile
+++ b/arch/arm/mach-berlin/Makefile
@@ -1 +1,2 @@
-obj-y += berlin.o
+obj-y += berlin.o
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
diff --git a/arch/arm/mach-berlin/headsmp.S b/arch/arm/mach-berlin/headsmp.S
new file mode 100644
index 0000000..4a4c56a
--- /dev/null
+++ b/arch/arm/mach-berlin/headsmp.S
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2014 Marvell Technology Group Ltd.
+ *
+ * Antoine Ténart <antoine.tenart@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+
+ENTRY(berlin_secondary_startup)
+ ARM_BE8(setend be)
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(berlin_secondary_startup)
+
+/*
+ * If the following instruction is set in the reset exception vector, CPUs
+ * will fetch the value of the software reset address vector when being
+ * reset.
+ */
+.global boot_inst
+boot_inst:
+ ldr pc, [pc, #140]
+
+ .align
diff --git a/arch/arm/mach-berlin/platsmp.c b/arch/arm/mach-berlin/platsmp.c
new file mode 100644
index 0000000..702e798
--- /dev/null
+++ b/arch/arm/mach-berlin/platsmp.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2014 Marvell Technology Group Ltd.
+ *
+ * Antoine Ténart <antoine.tenart@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+#define CPU_RESET 0x00
+
+#define RESET_VECT 0x00
+#define SW_RESET_ADDR 0x94
+
+extern void berlin_secondary_startup(void);
+extern u32 boot_inst;
+
+static void __iomem *cpu_ctrl;
+
+static inline void berlin_perform_reset_cpu(unsigned int cpu)
+{
+ u32 val;
+
+ val = readl(cpu_ctrl + CPU_RESET);
+ val |= BIT(cpu_logical_map(cpu));
+ writel(val, cpu_ctrl + CPU_RESET);
+}
+
+static int berlin_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ if (!cpu_ctrl)
+ return -EFAULT;
+
+ /*
+ * Reset the CPU, making it to execute the instruction in the reset
+ * exception vector.
+ */
+ berlin_perform_reset_cpu(cpu);
+
+ return 0;
+}
+
+static void __init berlin_smp_prepare_cpus(unsigned int max_cpus)
+{
+ struct device_node *np;
+ void __iomem *scu_base;
+ void __iomem *vectors_base;
+
+ np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ scu_base = of_iomap(np, 0);
+ of_node_put(np);
+ if (!scu_base)
+ return;
+
+ np = of_find_compatible_node(NULL, NULL, "marvell,berlin-cpu-ctrl");
+ cpu_ctrl = of_iomap(np, 0);
+ of_node_put(np);
+ if (!cpu_ctrl)
+ goto unmap_scu;
+
+ vectors_base = ioremap(CONFIG_VECTORS_BASE, SZ_32K);
+ if (!vectors_base)
+ goto unmap_scu;
+
+ scu_enable(scu_base);
+ flush_cache_all();
+
+ /*
+ * Write the first instruction the CPU will execute after being reset
+ * in the reset exception vector.
+ */
+ writel(boot_inst, vectors_base + RESET_VECT);
+
+ /*
+ * Write the secondary startup address into the SW reset address
+ * vector. This is used by boot_inst.
+ */
+ writel(virt_to_phys(berlin_secondary_startup), vectors_base + SW_RESET_ADDR);
+
+ iounmap(vectors_base);
+unmap_scu:
+ iounmap(scu_base);
+}
+
+static struct smp_operations berlin_smp_ops __initdata = {
+ .smp_prepare_cpus = berlin_smp_prepare_cpus,
+ .smp_boot_secondary = berlin_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(berlin_smp, "marvell,berlin-smp", &berlin_smp_ops);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index f8daa9c..47b904b 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -134,7 +134,7 @@
/* PMU(Power Management Unit) support */
-#define PMU_TABLE_END NULL
+#define PMU_TABLE_END (-1U)
enum sys_powerdown {
SYS_AFTR,
@@ -144,7 +144,7 @@
};
struct exynos_pmu_conf {
- void __iomem *reg;
+ unsigned int offset;
unsigned int val[NUM_SYS_POWERDOWN];
};
@@ -160,4 +160,14 @@
extern void s5p_init_cpu(void __iomem *cpuid_addr);
extern unsigned int samsung_rev(void);
+static inline void pmu_raw_writel(u32 val, u32 offset)
+{
+ __raw_writel(val, pmu_base_addr + offset);
+}
+
+static inline u32 pmu_raw_readl(u32 offset)
+{
+ return __raw_readl(pmu_base_addr + offset);
+}
+
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 80cbbc7..df41bd1 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -61,11 +61,6 @@
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_PMU,
- .pfn = __phys_to_pfn(EXYNOS4_PA_PMU),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_COMBINER_BASE,
.pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER),
.length = SZ_4K,
@@ -139,11 +134,6 @@
.pfn = __phys_to_pfn(EXYNOS5_PA_CMU),
.length = 144 * SZ_1K,
.type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_PMU,
- .pfn = __phys_to_pfn(EXYNOS5_PA_PMU),
- .length = SZ_64K,
- .type = MT_DEVICE,
},
};
@@ -151,7 +141,7 @@
{
struct device_node *np;
u32 val = 0x1;
- void __iomem *addr = EXYNOS_SWRESET;
+ void __iomem *addr = pmu_base_addr + EXYNOS_SWRESET;
if (of_machine_is_compatible("samsung,exynos5440")) {
u32 status;
@@ -175,17 +165,6 @@
.id = -1,
};
-void __init exynos_cpuidle_init(void)
-{
- if (soc_is_exynos4210() || soc_is_exynos5250())
- platform_device_register(&exynos_cpuidle);
-}
-
-void __init exynos_cpufreq_init(void)
-{
- platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
-}
-
void __iomem *sysram_base_addr;
void __iomem *sysram_ns_base_addr;
@@ -335,8 +314,11 @@
if (!IS_ENABLED(CONFIG_SMP))
exynos_sysram_init();
- exynos_cpuidle_init();
- exynos_cpufreq_init();
+ if (of_machine_is_compatible("samsung,exynos4210") ||
+ of_machine_is_compatible("samsung,exynos5250"))
+ platform_device_register(&exynos_cpuidle);
+
+ platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index 572f6b1..4d86961 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -39,15 +39,17 @@
static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
{
+ u32 mpidr = cpu_logical_map(cpu);
+ u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+
for (;;) {
- /* make cpu1 to be turned off at next WFI command */
- if (cpu == 1)
- exynos_cpu_power_down(cpu);
+ /* Turn the CPU off on next WFI instruction. */
+ exynos_cpu_power_down(core_id);
wfi();
- if (pen_release == cpu_logical_map(cpu)) {
+ if (pen_release == core_id) {
/*
* OK, proper wakeup, we're done
*/
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 963002f..f0b7e92 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -27,9 +27,6 @@
#define EXYNOS4_PA_SYSCON 0x10010000
#define EXYNOS5_PA_SYSCON 0x10050100
-#define EXYNOS4_PA_PMU 0x10020000
-#define EXYNOS5_PA_PMU 0x10040000
-
#define EXYNOS4_PA_CMU 0x10030000
#define EXYNOS5_PA_CMU 0x10010000
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index ace0ed6..70e8ccd 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -26,6 +26,10 @@
#define EXYNOS5420_CPUS_PER_CLUSTER 4
#define EXYNOS5420_NR_CLUSTERS 2
+#define EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN BIT(9)
+#define EXYNOS5420_USE_ARM_CORE_DOWN_STATE BIT(29)
+#define EXYNOS5420_USE_L2_COMMON_UP_STATE BIT(30)
+
/*
* The common v7_exit_coherency_flush API could not be used because of the
* Erratum 799270 workaround. This macro is the same as the common one (in
@@ -51,7 +55,7 @@
"dsb\n\t" \
"ldmfd sp!, {fp, ip}" \
: \
- : "Ir" (S5P_INFORM0) \
+ : "Ir" (pmu_base_addr + S5P_INFORM0) \
: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
"r9", "r10", "lr", "memory")
@@ -73,36 +77,9 @@
#define exynos_cluster_unused(cluster) !exynos_cluster_usecnt(cluster)
-static int exynos_cluster_power_control(unsigned int cluster, int enable)
-{
- unsigned int tries = 100;
- unsigned int val;
-
- if (enable) {
- exynos_cluster_power_up(cluster);
- val = S5P_CORE_LOCAL_PWR_EN;
- } else {
- exynos_cluster_power_down(cluster);
- val = 0;
- }
-
- /* Wait until cluster power control is applied */
- while (tries--) {
- if (exynos_cluster_power_state(cluster) == val)
- return 0;
-
- cpu_relax();
- }
- pr_debug("timed out waiting for cluster %u to power %s\n", cluster,
- enable ? "on" : "off");
-
- return -ETIMEDOUT;
-}
-
static int exynos_power_up(unsigned int cpu, unsigned int cluster)
{
unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
- int err = 0;
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
@@ -126,12 +103,9 @@
* cores.
*/
if (was_cluster_down)
- err = exynos_cluster_power_control(cluster, 1);
+ exynos_cluster_power_up(cluster);
- if (!err)
- exynos_cpu_power_up(cpunr);
- else
- exynos_cluster_power_control(cluster, 0);
+ exynos_cpu_power_up(cpunr);
} else if (cpu_use_count[cpu][cluster] != 2) {
/*
* The only possible values are:
@@ -147,7 +121,7 @@
arch_spin_unlock(&exynos_mcpm_lock);
local_irq_enable();
- return err;
+ return 0;
}
/*
@@ -178,9 +152,10 @@
if (cpu_use_count[cpu][cluster] == 0) {
exynos_cpu_power_down(cpunr);
- if (exynos_cluster_unused(cluster))
- /* TODO: Turn off the cluster here to save power. */
+ if (exynos_cluster_unused(cluster)) {
+ exynos_cluster_power_down(cluster);
last_man = true;
+ }
} else if (cpu_use_count[cpu][cluster] == 1) {
/*
* A power_up request went ahead of us.
@@ -257,10 +232,46 @@
return -ETIMEDOUT; /* timeout */
}
+static void exynos_powered_up(void)
+{
+ unsigned int mpidr, cpu, cluster;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ arch_spin_lock(&exynos_mcpm_lock);
+ if (cpu_use_count[cpu][cluster] == 0)
+ cpu_use_count[cpu][cluster] = 1;
+ arch_spin_unlock(&exynos_mcpm_lock);
+}
+
+static void exynos_suspend(u64 residency)
+{
+ unsigned int mpidr, cpunr;
+
+ exynos_power_down();
+
+ /*
+ * Execution reaches here only if cpu did not power down.
+ * Hence roll back the changes done in exynos_power_down function.
+ *
+ * CAUTION: "This function requires the stack data to be visible through
+ * power down and can only be executed on processors like A15 and A7
+ * that hit the cache with the C bit clear in the SCTLR register."
+ */
+ mpidr = read_cpuid_mpidr();
+ cpunr = exynos_pmu_cpunr(mpidr);
+
+ exynos_cpu_power_up(cpunr);
+}
+
static const struct mcpm_platform_ops exynos_power_ops = {
.power_up = exynos_power_up,
.power_down = exynos_power_down,
.wait_for_powerdown = exynos_wait_for_powerdown,
+ .suspend = exynos_suspend,
+ .powered_up = exynos_powered_up,
};
static void __init exynos_mcpm_usage_count_init(void)
@@ -299,6 +310,7 @@
{
struct device_node *node;
void __iomem *ns_sram_base_addr;
+ unsigned int value, i;
int ret;
node = of_find_matching_node(NULL, exynos_dt_mcpm_match);
@@ -325,7 +337,7 @@
* To increase the stability of KFC reset we need to program
* the PMU SPARE3 register
*/
- __raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3);
+ pmu_raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3);
exynos_mcpm_usage_count_init();
@@ -342,6 +354,26 @@
pr_info("Exynos MCPM support installed\n");
/*
+ * On Exynos5420/5800 for the A15 and A7 clusters:
+ *
+ * EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN ensures that all the cores
+ * in a cluster are turned off before turning off the cluster L2.
+ *
+ * EXYNOS5420_USE_ARM_CORE_DOWN_STATE ensures that a cores is powered
+ * off before waking it up.
+ *
+ * EXYNOS5420_USE_L2_COMMON_UP_STATE ensures that cluster L2 will be
+ * turned on before the first man is powered up.
+ */
+ for (i = 0; i < EXYNOS5420_NR_CLUSTERS; i++) {
+ value = pmu_raw_readl(EXYNOS_COMMON_OPTION(i));
+ value |= EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN |
+ EXYNOS5420_USE_ARM_CORE_DOWN_STATE |
+ EXYNOS5420_USE_L2_COMMON_UP_STATE;
+ pmu_raw_writel(value, EXYNOS_COMMON_OPTION(i));
+ }
+
+ /*
* U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr
* as part of secondary_cpu_start(). Let's redirect it to the
* mcpm_entry_point().
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 39ad38f..7c82998 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -26,6 +26,8 @@
#include <asm/smp_scu.h>
#include <asm/firmware.h>
+#include <mach/map.h>
+
#include "common.h"
#include "regs-pmu.h"
@@ -34,7 +36,7 @@
static inline void __iomem *cpu_boot_reg_base(void)
{
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
- return S5P_INFORM5;
+ return pmu_base_addr + S5P_INFORM5;
return sysram_base_addr;
}
@@ -89,7 +91,8 @@
static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
- unsigned long phys_cpu = cpu_logical_map(cpu);
+ u32 mpidr = cpu_logical_map(cpu);
+ u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
int ret = -ENOSYS;
/*
@@ -103,17 +106,18 @@
* the holding pen - release it, then wait for it to flag
* that it has been released by resetting pen_release.
*
- * Note that "pen_release" is the hardware CPU ID, whereas
+ * Note that "pen_release" is the hardware CPU core ID, whereas
* "cpu" is Linux's internal ID.
*/
- write_pen_release(phys_cpu);
+ write_pen_release(core_id);
- if (!exynos_cpu_power_state(cpu)) {
- exynos_cpu_power_up(cpu);
+ if (!exynos_cpu_power_state(core_id)) {
+ exynos_cpu_power_up(core_id);
timeout = 10;
/* wait max 10 ms until cpu1 is on */
- while (exynos_cpu_power_state(cpu) != S5P_CORE_LOCAL_PWR_EN) {
+ while (exynos_cpu_power_state(core_id)
+ != S5P_CORE_LOCAL_PWR_EN) {
if (timeout-- == 0)
break;
@@ -144,20 +148,20 @@
* Try to set boot address using firmware first
* and fall back to boot register if it fails.
*/
- ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
+ ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
if (ret && ret != -ENOSYS)
goto fail;
if (ret == -ENOSYS) {
- void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
+ void __iomem *boot_reg = cpu_boot_reg(core_id);
if (IS_ERR(boot_reg)) {
ret = PTR_ERR(boot_reg);
goto fail;
}
- __raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
+ __raw_writel(boot_addr, cpu_boot_reg(core_id));
}
- call_firmware_op(cpu_boot, phys_cpu);
+ call_firmware_op(cpu_boot, core_id);
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
@@ -226,22 +230,24 @@
* boot register if it fails.
*/
for (i = 1; i < max_cpus; ++i) {
- unsigned long phys_cpu;
unsigned long boot_addr;
+ u32 mpidr;
+ u32 core_id;
int ret;
- phys_cpu = cpu_logical_map(i);
+ mpidr = cpu_logical_map(i);
+ core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
boot_addr = virt_to_phys(exynos4_secondary_startup);
- ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
+ ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
if (ret && ret != -ENOSYS)
break;
if (ret == -ENOSYS) {
- void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
+ void __iomem *boot_reg = cpu_boot_reg(core_id);
if (IS_ERR(boot_reg))
break;
- __raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
+ __raw_writel(boot_addr, cpu_boot_reg(core_id));
}
}
}
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index a8b5af5..c4c6d98 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -110,7 +110,7 @@
*/
void exynos_cpu_power_down(int cpu)
{
- __raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+ pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
}
/**
@@ -121,8 +121,8 @@
*/
void exynos_cpu_power_up(int cpu)
{
- __raw_writel(S5P_CORE_LOCAL_PWR_EN,
- EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+ pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
+ EXYNOS_ARM_CORE_CONFIGURATION(cpu));
}
/**
@@ -132,7 +132,7 @@
*/
int exynos_cpu_power_state(int cpu)
{
- return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
+ return (pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
S5P_CORE_LOCAL_PWR_EN);
}
@@ -142,7 +142,7 @@
*/
void exynos_cluster_power_down(int cluster)
{
- __raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster));
+ pmu_raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster));
}
/**
@@ -151,8 +151,8 @@
*/
void exynos_cluster_power_up(int cluster)
{
- __raw_writel(S5P_CORE_LOCAL_PWR_EN,
- EXYNOS_COMMON_CONFIGURATION(cluster));
+ pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
+ EXYNOS_COMMON_CONFIGURATION(cluster));
}
/**
@@ -162,16 +162,20 @@
*/
int exynos_cluster_power_state(int cluster)
{
- return (__raw_readl(EXYNOS_COMMON_STATUS(cluster)) &
+ return (pmu_raw_readl(EXYNOS_COMMON_STATUS(cluster)) &
S5P_CORE_LOCAL_PWR_EN);
}
#define EXYNOS_BOOT_VECTOR_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \
- S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
- (sysram_base_addr + 0x24) : S5P_INFORM0))
+ pmu_base_addr + S5P_INFORM7 : \
+ (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+ (sysram_base_addr + 0x24) : \
+ pmu_base_addr + S5P_INFORM0))
#define EXYNOS_BOOT_VECTOR_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
- S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
- (sysram_base_addr + 0x20) : S5P_INFORM1))
+ pmu_base_addr + S5P_INFORM6 : \
+ (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+ (sysram_base_addr + 0x20) : \
+ pmu_base_addr + S5P_INFORM1))
#define S5P_CHECK_AFTR 0xFCBA0D10
#define S5P_CHECK_SLEEP 0x00000BAD
@@ -179,7 +183,7 @@
/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
static void exynos_set_wakeupmask(long mask)
{
- __raw_writel(mask, S5P_WAKEUP_MASK);
+ pmu_raw_writel(mask, S5P_WAKEUP_MASK);
}
static void exynos_cpu_set_boot_vector(long flags)
@@ -256,27 +260,27 @@
unsigned int tmp;
/* Set wake-up mask registers */
- __raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
- __raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
+ pmu_raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
+ pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
if (soc_is_exynos5250()) {
s3c_pm_do_save(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save));
/* Disable USE_RETENTION of JPEG_MEM_OPTION */
- tmp = __raw_readl(EXYNOS5_JPEG_MEM_OPTION);
+ tmp = pmu_raw_readl(EXYNOS5_JPEG_MEM_OPTION);
tmp &= ~EXYNOS5_OPTION_USE_RETENTION;
- __raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION);
+ pmu_raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION);
}
/* Set value of power down register for sleep mode */
exynos_sys_powerdown_conf(SYS_SLEEP);
- __raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
+ pmu_raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
/* ensure at least INFORM0 has the resume address */
- __raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
+ pmu_raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
}
static void exynos_pm_central_suspend(void)
@@ -284,9 +288,9 @@
unsigned long tmp;
/* Setting Central Sequence Register for power down mode */
- tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+ tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
- __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+ pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
}
static int exynos_pm_suspend(void)
@@ -298,7 +302,7 @@
/* Setting SEQ_OPTION register */
tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0);
- __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
+ pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
exynos_cpu_save_register();
@@ -316,12 +320,12 @@
* S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
* in this situation.
*/
- tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+ tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
tmp |= S5P_CENTRAL_LOWPWR_CFG;
- __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+ pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
/* clear the wakeup state register */
- __raw_writel(0x0, S5P_WAKEUP_STAT);
+ pmu_raw_writel(0x0, S5P_WAKEUP_STAT);
/* No need to perform below restore code */
return -1;
}
@@ -339,13 +343,13 @@
/* For release retention */
- __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION);
+ pmu_raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION);
+ pmu_raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION);
+ pmu_raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION);
+ pmu_raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION);
+ pmu_raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION);
+ pmu_raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION);
+ pmu_raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION);
if (soc_is_exynos5250())
s3c_pm_do_restore(exynos5_sys_save,
@@ -359,7 +363,7 @@
early_wakeup:
/* Clear SLEEP mode set in INFORM1 */
- __raw_writel(0x0, S5P_INFORM1);
+ pmu_raw_writel(0x0, S5P_INFORM1);
return;
}
@@ -403,7 +407,7 @@
s3c_pm_restore_uarts();
S3C_PMDBG("%s: wakeup stat: %08x\n", __func__,
- __raw_readl(S5P_WAKEUP_STAT));
+ pmu_raw_readl(S5P_WAKEUP_STAT));
s3c_pm_check_restore();
@@ -474,9 +478,9 @@
gic_arch_extn.irq_set_wake = exynos_irq_set_wake;
/* All wakeup disable */
- tmp = __raw_readl(S5P_WAKEUP_MASK);
+ tmp = pmu_raw_readl(S5P_WAKEUP_MASK);
tmp |= ((0xFF << 8) | (0x1F << 1));
- __raw_writel(tmp, S5P_WAKEUP_MASK);
+ pmu_raw_writel(tmp, S5P_WAKEUP_MASK);
register_syscore_ops(&exynos_pm_syscore_ops);
suspend_set_ops(&exynos_suspend_ops);
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index dcfcb44..ff9d23f 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -18,7 +18,7 @@
static const struct exynos_pmu_conf *exynos_pmu_config;
static const struct exynos_pmu_conf exynos4210_pmu_config[] = {
- /* { .reg = address, .val = { AFTR, LPA, SLEEP } */
+ /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
{ S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
@@ -212,7 +212,7 @@
};
static const struct exynos_pmu_conf exynos5250_pmu_config[] = {
- /* { .reg = address, .val = { AFTR, LPA, SLEEP } */
+ /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
{ EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
{ EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
@@ -315,7 +315,7 @@
{ PMU_TABLE_END,},
};
-static void __iomem * const exynos5_list_both_cnt_feed[] = {
+static unsigned int const exynos5_list_both_cnt_feed[] = {
EXYNOS5_ARM_CORE0_OPTION,
EXYNOS5_ARM_CORE1_OPTION,
EXYNOS5_ARM_COMMON_OPTION,
@@ -329,7 +329,7 @@
EXYNOS5_TOP_PWR_SYSMEM_OPTION,
};
-static void __iomem * const exynos5_list_diable_wfi_wfe[] = {
+static unsigned int const exynos5_list_diable_wfi_wfe[] = {
EXYNOS5_ARM_CORE1_OPTION,
EXYNOS5_FSYS_ARM_OPTION,
EXYNOS5_ISP_ARM_OPTION,
@@ -344,27 +344,27 @@
* Enable both SC_FEEDBACK and SC_COUNTER
*/
for (i = 0 ; i < ARRAY_SIZE(exynos5_list_both_cnt_feed) ; i++) {
- tmp = __raw_readl(exynos5_list_both_cnt_feed[i]);
+ tmp = pmu_raw_readl(exynos5_list_both_cnt_feed[i]);
tmp |= (EXYNOS5_USE_SC_FEEDBACK |
EXYNOS5_USE_SC_COUNTER);
- __raw_writel(tmp, exynos5_list_both_cnt_feed[i]);
+ pmu_raw_writel(tmp, exynos5_list_both_cnt_feed[i]);
}
/*
* SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable
*/
- tmp = __raw_readl(EXYNOS5_ARM_COMMON_OPTION);
+ tmp = pmu_raw_readl(EXYNOS5_ARM_COMMON_OPTION);
tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
- __raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION);
+ pmu_raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION);
/*
* Disable WFI/WFE on XXX_OPTION
*/
for (i = 0 ; i < ARRAY_SIZE(exynos5_list_diable_wfi_wfe) ; i++) {
- tmp = __raw_readl(exynos5_list_diable_wfi_wfe[i]);
+ tmp = pmu_raw_readl(exynos5_list_diable_wfi_wfe[i]);
tmp &= ~(EXYNOS5_OPTION_USE_STANDBYWFE |
EXYNOS5_OPTION_USE_STANDBYWFI);
- __raw_writel(tmp, exynos5_list_diable_wfi_wfe[i]);
+ pmu_raw_writel(tmp, exynos5_list_diable_wfi_wfe[i]);
}
}
@@ -375,14 +375,14 @@
if (soc_is_exynos5250())
exynos5_init_pmu();
- for (i = 0; (exynos_pmu_config[i].reg != PMU_TABLE_END) ; i++)
- __raw_writel(exynos_pmu_config[i].val[mode],
- exynos_pmu_config[i].reg);
+ for (i = 0; (exynos_pmu_config[i].offset != PMU_TABLE_END) ; i++)
+ pmu_raw_writel(exynos_pmu_config[i].val[mode],
+ exynos_pmu_config[i].offset);
if (soc_is_exynos4412()) {
- for (i = 0; exynos4412_pmu_config[i].reg != PMU_TABLE_END ; i++)
- __raw_writel(exynos4412_pmu_config[i].val[mode],
- exynos4412_pmu_config[i].reg);
+ for (i = 0; exynos4412_pmu_config[i].offset != PMU_TABLE_END ; i++)
+ pmu_raw_writel(exynos4412_pmu_config[i].val[mode],
+ exynos4412_pmu_config[i].offset);
}
}
@@ -403,13 +403,13 @@
* When SYS_WDTRESET is set, watchdog timer reset request
* is ignored by power management unit.
*/
- value = __raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
+ value = pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
value &= ~EXYNOS5_SYS_WDTRESET;
- __raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
+ pmu_raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
- value = __raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
+ value = pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
value &= ~EXYNOS5_SYS_WDTRESET;
- __raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
+ pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
exynos_pmu_config = exynos5250_pmu_config;
pr_info("EXYNOS5250 PMU Initialize\n");
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
index 1993e6b..96a1569 100644
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ b/arch/arm/mach-exynos/regs-pmu.h
@@ -12,300 +12,298 @@
#ifndef __ASM_ARCH_REGS_PMU_H
#define __ASM_ARCH_REGS_PMU_H __FILE__
-#include <mach/map.h>
-
-#define S5P_PMUREG(x) (S5P_VA_PMU + (x))
-
-#define S5P_CENTRAL_SEQ_CONFIGURATION S5P_PMUREG(0x0200)
+#define S5P_CENTRAL_SEQ_CONFIGURATION 0x0200
#define S5P_CENTRAL_LOWPWR_CFG (1 << 16)
-#define S5P_CENTRAL_SEQ_OPTION S5P_PMUREG(0x0208)
+#define S5P_CENTRAL_SEQ_OPTION 0x0208
#define S5P_USE_STANDBY_WFI0 (1 << 16)
#define S5P_USE_STANDBY_WFE0 (1 << 24)
-#define EXYNOS_SWRESET S5P_PMUREG(0x0400)
-#define EXYNOS5440_SWRESET S5P_PMUREG(0x00C4)
+#define EXYNOS_SWRESET 0x0400
+#define EXYNOS5440_SWRESET 0x00C4
-#define S5P_WAKEUP_STAT S5P_PMUREG(0x0600)
-#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604)
-#define S5P_WAKEUP_MASK S5P_PMUREG(0x0608)
+#define S5P_WAKEUP_STAT 0x0600
+#define S5P_EINT_WAKEUP_MASK 0x0604
+#define S5P_WAKEUP_MASK 0x0608
-#define S5P_INFORM0 S5P_PMUREG(0x0800)
-#define S5P_INFORM1 S5P_PMUREG(0x0804)
-#define S5P_INFORM5 S5P_PMUREG(0x0814)
-#define S5P_INFORM6 S5P_PMUREG(0x0818)
-#define S5P_INFORM7 S5P_PMUREG(0x081C)
-#define S5P_PMU_SPARE3 S5P_PMUREG(0x090C)
+#define S5P_INFORM0 0x0800
+#define S5P_INFORM1 0x0804
+#define S5P_INFORM5 0x0814
+#define S5P_INFORM6 0x0818
+#define S5P_INFORM7 0x081C
+#define S5P_PMU_SPARE3 0x090C
-#define S5P_ARM_CORE0_LOWPWR S5P_PMUREG(0x1000)
-#define S5P_DIS_IRQ_CORE0 S5P_PMUREG(0x1004)
-#define S5P_DIS_IRQ_CENTRAL0 S5P_PMUREG(0x1008)
-#define S5P_ARM_CORE1_LOWPWR S5P_PMUREG(0x1010)
-#define S5P_DIS_IRQ_CORE1 S5P_PMUREG(0x1014)
-#define S5P_DIS_IRQ_CENTRAL1 S5P_PMUREG(0x1018)
-#define S5P_ARM_COMMON_LOWPWR S5P_PMUREG(0x1080)
-#define S5P_L2_0_LOWPWR S5P_PMUREG(0x10C0)
-#define S5P_L2_1_LOWPWR S5P_PMUREG(0x10C4)
-#define S5P_CMU_ACLKSTOP_LOWPWR S5P_PMUREG(0x1100)
-#define S5P_CMU_SCLKSTOP_LOWPWR S5P_PMUREG(0x1104)
-#define S5P_CMU_RESET_LOWPWR S5P_PMUREG(0x110C)
-#define S5P_APLL_SYSCLK_LOWPWR S5P_PMUREG(0x1120)
-#define S5P_MPLL_SYSCLK_LOWPWR S5P_PMUREG(0x1124)
-#define S5P_VPLL_SYSCLK_LOWPWR S5P_PMUREG(0x1128)
-#define S5P_EPLL_SYSCLK_LOWPWR S5P_PMUREG(0x112C)
-#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR S5P_PMUREG(0x1138)
-#define S5P_CMU_RESET_GPSALIVE_LOWPWR S5P_PMUREG(0x113C)
-#define S5P_CMU_CLKSTOP_CAM_LOWPWR S5P_PMUREG(0x1140)
-#define S5P_CMU_CLKSTOP_TV_LOWPWR S5P_PMUREG(0x1144)
-#define S5P_CMU_CLKSTOP_MFC_LOWPWR S5P_PMUREG(0x1148)
-#define S5P_CMU_CLKSTOP_G3D_LOWPWR S5P_PMUREG(0x114C)
-#define S5P_CMU_CLKSTOP_LCD0_LOWPWR S5P_PMUREG(0x1150)
-#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR S5P_PMUREG(0x1158)
-#define S5P_CMU_CLKSTOP_GPS_LOWPWR S5P_PMUREG(0x115C)
-#define S5P_CMU_RESET_CAM_LOWPWR S5P_PMUREG(0x1160)
-#define S5P_CMU_RESET_TV_LOWPWR S5P_PMUREG(0x1164)
-#define S5P_CMU_RESET_MFC_LOWPWR S5P_PMUREG(0x1168)
-#define S5P_CMU_RESET_G3D_LOWPWR S5P_PMUREG(0x116C)
-#define S5P_CMU_RESET_LCD0_LOWPWR S5P_PMUREG(0x1170)
-#define S5P_CMU_RESET_MAUDIO_LOWPWR S5P_PMUREG(0x1178)
-#define S5P_CMU_RESET_GPS_LOWPWR S5P_PMUREG(0x117C)
-#define S5P_TOP_BUS_LOWPWR S5P_PMUREG(0x1180)
-#define S5P_TOP_RETENTION_LOWPWR S5P_PMUREG(0x1184)
-#define S5P_TOP_PWR_LOWPWR S5P_PMUREG(0x1188)
-#define S5P_LOGIC_RESET_LOWPWR S5P_PMUREG(0x11A0)
-#define S5P_ONENAND_MEM_LOWPWR S5P_PMUREG(0x11C0)
-#define S5P_G2D_ACP_MEM_LOWPWR S5P_PMUREG(0x11C8)
-#define S5P_USBOTG_MEM_LOWPWR S5P_PMUREG(0x11CC)
-#define S5P_HSMMC_MEM_LOWPWR S5P_PMUREG(0x11D0)
-#define S5P_CSSYS_MEM_LOWPWR S5P_PMUREG(0x11D4)
-#define S5P_SECSS_MEM_LOWPWR S5P_PMUREG(0x11D8)
-#define S5P_PAD_RETENTION_DRAM_LOWPWR S5P_PMUREG(0x1200)
-#define S5P_PAD_RETENTION_MAUDIO_LOWPWR S5P_PMUREG(0x1204)
-#define S5P_PAD_RETENTION_GPIO_LOWPWR S5P_PMUREG(0x1220)
-#define S5P_PAD_RETENTION_UART_LOWPWR S5P_PMUREG(0x1224)
-#define S5P_PAD_RETENTION_MMCA_LOWPWR S5P_PMUREG(0x1228)
-#define S5P_PAD_RETENTION_MMCB_LOWPWR S5P_PMUREG(0x122C)
-#define S5P_PAD_RETENTION_EBIA_LOWPWR S5P_PMUREG(0x1230)
-#define S5P_PAD_RETENTION_EBIB_LOWPWR S5P_PMUREG(0x1234)
-#define S5P_PAD_RETENTION_ISOLATION_LOWPWR S5P_PMUREG(0x1240)
-#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR S5P_PMUREG(0x1260)
-#define S5P_XUSBXTI_LOWPWR S5P_PMUREG(0x1280)
-#define S5P_XXTI_LOWPWR S5P_PMUREG(0x1284)
-#define S5P_EXT_REGULATOR_LOWPWR S5P_PMUREG(0x12C0)
-#define S5P_GPIO_MODE_LOWPWR S5P_PMUREG(0x1300)
-#define S5P_GPIO_MODE_MAUDIO_LOWPWR S5P_PMUREG(0x1340)
-#define S5P_CAM_LOWPWR S5P_PMUREG(0x1380)
-#define S5P_TV_LOWPWR S5P_PMUREG(0x1384)
-#define S5P_MFC_LOWPWR S5P_PMUREG(0x1388)
-#define S5P_G3D_LOWPWR S5P_PMUREG(0x138C)
-#define S5P_LCD0_LOWPWR S5P_PMUREG(0x1390)
-#define S5P_MAUDIO_LOWPWR S5P_PMUREG(0x1398)
-#define S5P_GPS_LOWPWR S5P_PMUREG(0x139C)
-#define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0)
+#define S5P_ARM_CORE0_LOWPWR 0x1000
+#define S5P_DIS_IRQ_CORE0 0x1004
+#define S5P_DIS_IRQ_CENTRAL0 0x1008
+#define S5P_ARM_CORE1_LOWPWR 0x1010
+#define S5P_DIS_IRQ_CORE1 0x1014
+#define S5P_DIS_IRQ_CENTRAL1 0x1018
+#define S5P_ARM_COMMON_LOWPWR 0x1080
+#define S5P_L2_0_LOWPWR 0x10C0
+#define S5P_L2_1_LOWPWR 0x10C4
+#define S5P_CMU_ACLKSTOP_LOWPWR 0x1100
+#define S5P_CMU_SCLKSTOP_LOWPWR 0x1104
+#define S5P_CMU_RESET_LOWPWR 0x110C
+#define S5P_APLL_SYSCLK_LOWPWR 0x1120
+#define S5P_MPLL_SYSCLK_LOWPWR 0x1124
+#define S5P_VPLL_SYSCLK_LOWPWR 0x1128
+#define S5P_EPLL_SYSCLK_LOWPWR 0x112C
+#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR 0x1138
+#define S5P_CMU_RESET_GPSALIVE_LOWPWR 0x113C
+#define S5P_CMU_CLKSTOP_CAM_LOWPWR 0x1140
+#define S5P_CMU_CLKSTOP_TV_LOWPWR 0x1144
+#define S5P_CMU_CLKSTOP_MFC_LOWPWR 0x1148
+#define S5P_CMU_CLKSTOP_G3D_LOWPWR 0x114C
+#define S5P_CMU_CLKSTOP_LCD0_LOWPWR 0x1150
+#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR 0x1158
+#define S5P_CMU_CLKSTOP_GPS_LOWPWR 0x115C
+#define S5P_CMU_RESET_CAM_LOWPWR 0x1160
+#define S5P_CMU_RESET_TV_LOWPWR 0x1164
+#define S5P_CMU_RESET_MFC_LOWPWR 0x1168
+#define S5P_CMU_RESET_G3D_LOWPWR 0x116C
+#define S5P_CMU_RESET_LCD0_LOWPWR 0x1170
+#define S5P_CMU_RESET_MAUDIO_LOWPWR 0x1178
+#define S5P_CMU_RESET_GPS_LOWPWR 0x117C
+#define S5P_TOP_BUS_LOWPWR 0x1180
+#define S5P_TOP_RETENTION_LOWPWR 0x1184
+#define S5P_TOP_PWR_LOWPWR 0x1188
+#define S5P_LOGIC_RESET_LOWPWR 0x11A0
+#define S5P_ONENAND_MEM_LOWPWR 0x11C0
+#define S5P_G2D_ACP_MEM_LOWPWR 0x11C8
+#define S5P_USBOTG_MEM_LOWPWR 0x11CC
+#define S5P_HSMMC_MEM_LOWPWR 0x11D0
+#define S5P_CSSYS_MEM_LOWPWR 0x11D4
+#define S5P_SECSS_MEM_LOWPWR 0x11D8
+#define S5P_PAD_RETENTION_DRAM_LOWPWR 0x1200
+#define S5P_PAD_RETENTION_MAUDIO_LOWPWR 0x1204
+#define S5P_PAD_RETENTION_GPIO_LOWPWR 0x1220
+#define S5P_PAD_RETENTION_UART_LOWPWR 0x1224
+#define S5P_PAD_RETENTION_MMCA_LOWPWR 0x1228
+#define S5P_PAD_RETENTION_MMCB_LOWPWR 0x122C
+#define S5P_PAD_RETENTION_EBIA_LOWPWR 0x1230
+#define S5P_PAD_RETENTION_EBIB_LOWPWR 0x1234
+#define S5P_PAD_RETENTION_ISOLATION_LOWPWR 0x1240
+#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR 0x1260
+#define S5P_XUSBXTI_LOWPWR 0x1280
+#define S5P_XXTI_LOWPWR 0x1284
+#define S5P_EXT_REGULATOR_LOWPWR 0x12C0
+#define S5P_GPIO_MODE_LOWPWR 0x1300
+#define S5P_GPIO_MODE_MAUDIO_LOWPWR 0x1340
+#define S5P_CAM_LOWPWR 0x1380
+#define S5P_TV_LOWPWR 0x1384
+#define S5P_MFC_LOWPWR 0x1388
+#define S5P_G3D_LOWPWR 0x138C
+#define S5P_LCD0_LOWPWR 0x1390
+#define S5P_MAUDIO_LOWPWR 0x1398
+#define S5P_GPS_LOWPWR 0x139C
+#define S5P_GPS_ALIVE_LOWPWR 0x13A0
-#define EXYNOS_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000)
+#define EXYNOS_ARM_CORE0_CONFIGURATION 0x2000
#define EXYNOS_ARM_CORE_CONFIGURATION(_nr) \
(EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr)))
#define EXYNOS_ARM_CORE_STATUS(_nr) \
(EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4)
-#define EXYNOS_ARM_COMMON_CONFIGURATION S5P_PMUREG(0x2500)
+#define EXYNOS_ARM_COMMON_CONFIGURATION 0x2500
#define EXYNOS_COMMON_CONFIGURATION(_nr) \
(EXYNOS_ARM_COMMON_CONFIGURATION + (0x80 * (_nr)))
#define EXYNOS_COMMON_STATUS(_nr) \
(EXYNOS_COMMON_CONFIGURATION(_nr) + 0x4)
+#define EXYNOS_COMMON_OPTION(_nr) \
+ (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8)
-#define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028)
-#define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108)
-#define S5P_PAD_RET_UART_OPTION S5P_PMUREG(0x3128)
-#define S5P_PAD_RET_MMCA_OPTION S5P_PMUREG(0x3148)
-#define S5P_PAD_RET_MMCB_OPTION S5P_PMUREG(0x3168)
-#define S5P_PAD_RET_EBIA_OPTION S5P_PMUREG(0x3188)
-#define S5P_PAD_RET_EBIB_OPTION S5P_PMUREG(0x31A8)
+#define S5P_PAD_RET_MAUDIO_OPTION 0x3028
+#define S5P_PAD_RET_GPIO_OPTION 0x3108
+#define S5P_PAD_RET_UART_OPTION 0x3128
+#define S5P_PAD_RET_MMCA_OPTION 0x3148
+#define S5P_PAD_RET_MMCB_OPTION 0x3168
+#define S5P_PAD_RET_EBIA_OPTION 0x3188
+#define S5P_PAD_RET_EBIB_OPTION 0x31A8
#define S5P_CORE_LOCAL_PWR_EN 0x3
/* Only for EXYNOS4210 */
-#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154)
-#define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174)
-#define S5P_MODIMIF_MEM_LOWPWR S5P_PMUREG(0x11C4)
-#define S5P_PCIE_MEM_LOWPWR S5P_PMUREG(0x11E0)
-#define S5P_SATA_MEM_LOWPWR S5P_PMUREG(0x11E4)
-#define S5P_LCD1_LOWPWR S5P_PMUREG(0x1394)
+#define S5P_CMU_CLKSTOP_LCD1_LOWPWR 0x1154
+#define S5P_CMU_RESET_LCD1_LOWPWR 0x1174
+#define S5P_MODIMIF_MEM_LOWPWR 0x11C4
+#define S5P_PCIE_MEM_LOWPWR 0x11E0
+#define S5P_SATA_MEM_LOWPWR 0x11E4
+#define S5P_LCD1_LOWPWR 0x1394
/* Only for EXYNOS4x12 */
-#define S5P_ISP_ARM_LOWPWR S5P_PMUREG(0x1050)
-#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR S5P_PMUREG(0x1054)
-#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR S5P_PMUREG(0x1058)
-#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR S5P_PMUREG(0x1110)
-#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR S5P_PMUREG(0x1114)
-#define S5P_CMU_RESET_COREBLK_LOWPWR S5P_PMUREG(0x111C)
-#define S5P_MPLLUSER_SYSCLK_LOWPWR S5P_PMUREG(0x1130)
-#define S5P_CMU_CLKSTOP_ISP_LOWPWR S5P_PMUREG(0x1154)
-#define S5P_CMU_RESET_ISP_LOWPWR S5P_PMUREG(0x1174)
-#define S5P_TOP_BUS_COREBLK_LOWPWR S5P_PMUREG(0x1190)
-#define S5P_TOP_RETENTION_COREBLK_LOWPWR S5P_PMUREG(0x1194)
-#define S5P_TOP_PWR_COREBLK_LOWPWR S5P_PMUREG(0x1198)
-#define S5P_OSCCLK_GATE_LOWPWR S5P_PMUREG(0x11A4)
-#define S5P_LOGIC_RESET_COREBLK_LOWPWR S5P_PMUREG(0x11B0)
-#define S5P_OSCCLK_GATE_COREBLK_LOWPWR S5P_PMUREG(0x11B4)
-#define S5P_HSI_MEM_LOWPWR S5P_PMUREG(0x11C4)
-#define S5P_ROTATOR_MEM_LOWPWR S5P_PMUREG(0x11DC)
-#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR S5P_PMUREG(0x123C)
-#define S5P_PAD_ISOLATION_COREBLK_LOWPWR S5P_PMUREG(0x1250)
-#define S5P_GPIO_MODE_COREBLK_LOWPWR S5P_PMUREG(0x1320)
-#define S5P_TOP_ASB_RESET_LOWPWR S5P_PMUREG(0x1344)
-#define S5P_TOP_ASB_ISOLATION_LOWPWR S5P_PMUREG(0x1348)
-#define S5P_ISP_LOWPWR S5P_PMUREG(0x1394)
-#define S5P_DRAM_FREQ_DOWN_LOWPWR S5P_PMUREG(0x13B0)
-#define S5P_DDRPHY_DLLOFF_LOWPWR S5P_PMUREG(0x13B4)
-#define S5P_CMU_SYSCLK_ISP_LOWPWR S5P_PMUREG(0x13B8)
-#define S5P_CMU_SYSCLK_GPS_LOWPWR S5P_PMUREG(0x13BC)
-#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR S5P_PMUREG(0x13C0)
+#define S5P_ISP_ARM_LOWPWR 0x1050
+#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR 0x1054
+#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR 0x1058
+#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR 0x1110
+#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR 0x1114
+#define S5P_CMU_RESET_COREBLK_LOWPWR 0x111C
+#define S5P_MPLLUSER_SYSCLK_LOWPWR 0x1130
+#define S5P_CMU_CLKSTOP_ISP_LOWPWR 0x1154
+#define S5P_CMU_RESET_ISP_LOWPWR 0x1174
+#define S5P_TOP_BUS_COREBLK_LOWPWR 0x1190
+#define S5P_TOP_RETENTION_COREBLK_LOWPWR 0x1194
+#define S5P_TOP_PWR_COREBLK_LOWPWR 0x1198
+#define S5P_OSCCLK_GATE_LOWPWR 0x11A4
+#define S5P_LOGIC_RESET_COREBLK_LOWPWR 0x11B0
+#define S5P_OSCCLK_GATE_COREBLK_LOWPWR 0x11B4
+#define S5P_HSI_MEM_LOWPWR 0x11C4
+#define S5P_ROTATOR_MEM_LOWPWR 0x11DC
+#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR 0x123C
+#define S5P_PAD_ISOLATION_COREBLK_LOWPWR 0x1250
+#define S5P_GPIO_MODE_COREBLK_LOWPWR 0x1320
+#define S5P_TOP_ASB_RESET_LOWPWR 0x1344
+#define S5P_TOP_ASB_ISOLATION_LOWPWR 0x1348
+#define S5P_ISP_LOWPWR 0x1394
+#define S5P_DRAM_FREQ_DOWN_LOWPWR 0x13B0
+#define S5P_DDRPHY_DLLOFF_LOWPWR 0x13B4
+#define S5P_CMU_SYSCLK_ISP_LOWPWR 0x13B8
+#define S5P_CMU_SYSCLK_GPS_LOWPWR 0x13BC
+#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR 0x13C0
-#define S5P_ARM_L2_0_OPTION S5P_PMUREG(0x2608)
-#define S5P_ARM_L2_1_OPTION S5P_PMUREG(0x2628)
-#define S5P_ONENAND_MEM_OPTION S5P_PMUREG(0x2E08)
-#define S5P_HSI_MEM_OPTION S5P_PMUREG(0x2E28)
-#define S5P_G2D_ACP_MEM_OPTION S5P_PMUREG(0x2E48)
-#define S5P_USBOTG_MEM_OPTION S5P_PMUREG(0x2E68)
-#define S5P_HSMMC_MEM_OPTION S5P_PMUREG(0x2E88)
-#define S5P_CSSYS_MEM_OPTION S5P_PMUREG(0x2EA8)
-#define S5P_SECSS_MEM_OPTION S5P_PMUREG(0x2EC8)
-#define S5P_ROTATOR_MEM_OPTION S5P_PMUREG(0x2F48)
+#define S5P_ARM_L2_0_OPTION 0x2608
+#define S5P_ARM_L2_1_OPTION 0x2628
+#define S5P_ONENAND_MEM_OPTION 0x2E08
+#define S5P_HSI_MEM_OPTION 0x2E28
+#define S5P_G2D_ACP_MEM_OPTION 0x2E48
+#define S5P_USBOTG_MEM_OPTION 0x2E68
+#define S5P_HSMMC_MEM_OPTION 0x2E88
+#define S5P_CSSYS_MEM_OPTION 0x2EA8
+#define S5P_SECSS_MEM_OPTION 0x2EC8
+#define S5P_ROTATOR_MEM_OPTION 0x2F48
/* Only for EXYNOS4412 */
-#define S5P_ARM_CORE2_LOWPWR S5P_PMUREG(0x1020)
-#define S5P_DIS_IRQ_CORE2 S5P_PMUREG(0x1024)
-#define S5P_DIS_IRQ_CENTRAL2 S5P_PMUREG(0x1028)
-#define S5P_ARM_CORE3_LOWPWR S5P_PMUREG(0x1030)
-#define S5P_DIS_IRQ_CORE3 S5P_PMUREG(0x1034)
-#define S5P_DIS_IRQ_CENTRAL3 S5P_PMUREG(0x1038)
+#define S5P_ARM_CORE2_LOWPWR 0x1020
+#define S5P_DIS_IRQ_CORE2 0x1024
+#define S5P_DIS_IRQ_CENTRAL2 0x1028
+#define S5P_ARM_CORE3_LOWPWR 0x1030
+#define S5P_DIS_IRQ_CORE3 0x1034
+#define S5P_DIS_IRQ_CENTRAL3 0x1038
/* For EXYNOS5 */
-#define EXYNOS5_AUTO_WDTRESET_DISABLE S5P_PMUREG(0x0408)
-#define EXYNOS5_MASK_WDTRESET_REQUEST S5P_PMUREG(0x040C)
+#define EXYNOS5_AUTO_WDTRESET_DISABLE 0x0408
+#define EXYNOS5_MASK_WDTRESET_REQUEST 0x040C
#define EXYNOS5_SYS_WDTRESET (1 << 20)
-#define EXYNOS5_ARM_CORE0_SYS_PWR_REG S5P_PMUREG(0x1000)
-#define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG S5P_PMUREG(0x1004)
-#define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG S5P_PMUREG(0x1008)
-#define EXYNOS5_ARM_CORE1_SYS_PWR_REG S5P_PMUREG(0x1010)
-#define EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG S5P_PMUREG(0x1014)
-#define EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG S5P_PMUREG(0x1018)
-#define EXYNOS5_FSYS_ARM_SYS_PWR_REG S5P_PMUREG(0x1040)
-#define EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG S5P_PMUREG(0x1048)
-#define EXYNOS5_ISP_ARM_SYS_PWR_REG S5P_PMUREG(0x1050)
-#define EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG S5P_PMUREG(0x1054)
-#define EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG S5P_PMUREG(0x1058)
-#define EXYNOS5_ARM_COMMON_SYS_PWR_REG S5P_PMUREG(0x1080)
-#define EXYNOS5_ARM_L2_SYS_PWR_REG S5P_PMUREG(0x10C0)
-#define EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG S5P_PMUREG(0x1100)
-#define EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG S5P_PMUREG(0x1104)
-#define EXYNOS5_CMU_RESET_SYS_PWR_REG S5P_PMUREG(0x110C)
-#define EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x1120)
-#define EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x1124)
-#define EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x112C)
-#define EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG S5P_PMUREG(0x1130)
-#define EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG S5P_PMUREG(0x1134)
-#define EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG S5P_PMUREG(0x1138)
-#define EXYNOS5_APLL_SYSCLK_SYS_PWR_REG S5P_PMUREG(0x1140)
-#define EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG S5P_PMUREG(0x1144)
-#define EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG S5P_PMUREG(0x1148)
-#define EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG S5P_PMUREG(0x114C)
-#define EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG S5P_PMUREG(0x1150)
-#define EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG S5P_PMUREG(0x1154)
-#define EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG S5P_PMUREG(0x1164)
-#define EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG S5P_PMUREG(0x1170)
-#define EXYNOS5_TOP_BUS_SYS_PWR_REG S5P_PMUREG(0x1180)
-#define EXYNOS5_TOP_RETENTION_SYS_PWR_REG S5P_PMUREG(0x1184)
-#define EXYNOS5_TOP_PWR_SYS_PWR_REG S5P_PMUREG(0x1188)
-#define EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x1190)
-#define EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x1194)
-#define EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x1198)
-#define EXYNOS5_LOGIC_RESET_SYS_PWR_REG S5P_PMUREG(0x11A0)
-#define EXYNOS5_OSCCLK_GATE_SYS_PWR_REG S5P_PMUREG(0x11A4)
-#define EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x11B0)
-#define EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x11B4)
-#define EXYNOS5_USBOTG_MEM_SYS_PWR_REG S5P_PMUREG(0x11C0)
-#define EXYNOS5_G2D_MEM_SYS_PWR_REG S5P_PMUREG(0x11C8)
-#define EXYNOS5_USBDRD_MEM_SYS_PWR_REG S5P_PMUREG(0x11CC)
-#define EXYNOS5_SDMMC_MEM_SYS_PWR_REG S5P_PMUREG(0x11D0)
-#define EXYNOS5_CSSYS_MEM_SYS_PWR_REG S5P_PMUREG(0x11D4)
-#define EXYNOS5_SECSS_MEM_SYS_PWR_REG S5P_PMUREG(0x11D8)
-#define EXYNOS5_ROTATOR_MEM_SYS_PWR_REG S5P_PMUREG(0x11DC)
-#define EXYNOS5_INTRAM_MEM_SYS_PWR_REG S5P_PMUREG(0x11E0)
-#define EXYNOS5_INTROM_MEM_SYS_PWR_REG S5P_PMUREG(0x11E4)
-#define EXYNOS5_JPEG_MEM_SYS_PWR_REG S5P_PMUREG(0x11E8)
-#define EXYNOS5_HSI_MEM_SYS_PWR_REG S5P_PMUREG(0x11EC)
-#define EXYNOS5_MCUIOP_MEM_SYS_PWR_REG S5P_PMUREG(0x11F4)
-#define EXYNOS5_SATA_MEM_SYS_PWR_REG S5P_PMUREG(0x11FC)
-#define EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG S5P_PMUREG(0x1200)
-#define EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG S5P_PMUREG(0x1204)
-#define EXYNOS5_PAD_RETENTION_EFNAND_SYS_PWR_REG S5P_PMUREG(0x1208)
-#define EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG S5P_PMUREG(0x1220)
-#define EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG S5P_PMUREG(0x1224)
-#define EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG S5P_PMUREG(0x1228)
-#define EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG S5P_PMUREG(0x122C)
-#define EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG S5P_PMUREG(0x1230)
-#define EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG S5P_PMUREG(0x1234)
-#define EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG S5P_PMUREG(0x1238)
-#define EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x123C)
-#define EXYNOS5_PAD_ISOLATION_SYS_PWR_REG S5P_PMUREG(0x1240)
-#define EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x1250)
-#define EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG S5P_PMUREG(0x1260)
-#define EXYNOS5_XUSBXTI_SYS_PWR_REG S5P_PMUREG(0x1280)
-#define EXYNOS5_XXTI_SYS_PWR_REG S5P_PMUREG(0x1284)
-#define EXYNOS5_EXT_REGULATOR_SYS_PWR_REG S5P_PMUREG(0x12C0)
-#define EXYNOS5_GPIO_MODE_SYS_PWR_REG S5P_PMUREG(0x1300)
-#define EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG S5P_PMUREG(0x1320)
-#define EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG S5P_PMUREG(0x1340)
-#define EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG S5P_PMUREG(0x1344)
-#define EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG S5P_PMUREG(0x1348)
-#define EXYNOS5_GSCL_SYS_PWR_REG S5P_PMUREG(0x1400)
-#define EXYNOS5_ISP_SYS_PWR_REG S5P_PMUREG(0x1404)
-#define EXYNOS5_MFC_SYS_PWR_REG S5P_PMUREG(0x1408)
-#define EXYNOS5_G3D_SYS_PWR_REG S5P_PMUREG(0x140C)
-#define EXYNOS5_DISP1_SYS_PWR_REG S5P_PMUREG(0x1414)
-#define EXYNOS5_MAU_SYS_PWR_REG S5P_PMUREG(0x1418)
-#define EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG S5P_PMUREG(0x1480)
-#define EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG S5P_PMUREG(0x1484)
-#define EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG S5P_PMUREG(0x1488)
-#define EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG S5P_PMUREG(0x148C)
-#define EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG S5P_PMUREG(0x1494)
-#define EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG S5P_PMUREG(0x1498)
-#define EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG S5P_PMUREG(0x14C0)
-#define EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG S5P_PMUREG(0x14C4)
-#define EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG S5P_PMUREG(0x14C8)
-#define EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG S5P_PMUREG(0x14CC)
-#define EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG S5P_PMUREG(0x14D4)
-#define EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG S5P_PMUREG(0x14D8)
-#define EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG S5P_PMUREG(0x1580)
-#define EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG S5P_PMUREG(0x1584)
-#define EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG S5P_PMUREG(0x1588)
-#define EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG S5P_PMUREG(0x158C)
-#define EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG S5P_PMUREG(0x1594)
-#define EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG S5P_PMUREG(0x1598)
+#define EXYNOS5_ARM_CORE0_SYS_PWR_REG 0x1000
+#define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG 0x1004
+#define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG 0x1008
+#define EXYNOS5_ARM_CORE1_SYS_PWR_REG 0x1010
+#define EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG 0x1014
+#define EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG 0x1018
+#define EXYNOS5_FSYS_ARM_SYS_PWR_REG 0x1040
+#define EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG 0x1048
+#define EXYNOS5_ISP_ARM_SYS_PWR_REG 0x1050
+#define EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1054
+#define EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1058
+#define EXYNOS5_ARM_COMMON_SYS_PWR_REG 0x1080
+#define EXYNOS5_ARM_L2_SYS_PWR_REG 0x10C0
+#define EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG 0x1100
+#define EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG 0x1104
+#define EXYNOS5_CMU_RESET_SYS_PWR_REG 0x110C
+#define EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG 0x1120
+#define EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG 0x1124
+#define EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG 0x112C
+#define EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG 0x1130
+#define EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG 0x1134
+#define EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG 0x1138
+#define EXYNOS5_APLL_SYSCLK_SYS_PWR_REG 0x1140
+#define EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG 0x1144
+#define EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG 0x1148
+#define EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG 0x114C
+#define EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG 0x1150
+#define EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG 0x1154
+#define EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG 0x1164
+#define EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG 0x1170
+#define EXYNOS5_TOP_BUS_SYS_PWR_REG 0x1180
+#define EXYNOS5_TOP_RETENTION_SYS_PWR_REG 0x1184
+#define EXYNOS5_TOP_PWR_SYS_PWR_REG 0x1188
+#define EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG 0x1190
+#define EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG 0x1194
+#define EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG 0x1198
+#define EXYNOS5_LOGIC_RESET_SYS_PWR_REG 0x11A0
+#define EXYNOS5_OSCCLK_GATE_SYS_PWR_REG 0x11A4
+#define EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG 0x11B0
+#define EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG 0x11B4
+#define EXYNOS5_USBOTG_MEM_SYS_PWR_REG 0x11C0
+#define EXYNOS5_G2D_MEM_SYS_PWR_REG 0x11C8
+#define EXYNOS5_USBDRD_MEM_SYS_PWR_REG 0x11CC
+#define EXYNOS5_SDMMC_MEM_SYS_PWR_REG 0x11D0
+#define EXYNOS5_CSSYS_MEM_SYS_PWR_REG 0x11D4
+#define EXYNOS5_SECSS_MEM_SYS_PWR_REG 0x11D8
+#define EXYNOS5_ROTATOR_MEM_SYS_PWR_REG 0x11DC
+#define EXYNOS5_INTRAM_MEM_SYS_PWR_REG 0x11E0
+#define EXYNOS5_INTROM_MEM_SYS_PWR_REG 0x11E4
+#define EXYNOS5_JPEG_MEM_SYS_PWR_REG 0x11E8
+#define EXYNOS5_HSI_MEM_SYS_PWR_REG 0x11EC
+#define EXYNOS5_MCUIOP_MEM_SYS_PWR_REG 0x11F4
+#define EXYNOS5_SATA_MEM_SYS_PWR_REG 0x11FC
+#define EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200
+#define EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG 0x1204
+#define EXYNOS5_PAD_RETENTION_EFNAND_SYS_PWR_REG 0x1208
+#define EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220
+#define EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG 0x1224
+#define EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG 0x1228
+#define EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG 0x122C
+#define EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1230
+#define EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG 0x1234
+#define EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG 0x1238
+#define EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG 0x123C
+#define EXYNOS5_PAD_ISOLATION_SYS_PWR_REG 0x1240
+#define EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG 0x1250
+#define EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG 0x1260
+#define EXYNOS5_XUSBXTI_SYS_PWR_REG 0x1280
+#define EXYNOS5_XXTI_SYS_PWR_REG 0x1284
+#define EXYNOS5_EXT_REGULATOR_SYS_PWR_REG 0x12C0
+#define EXYNOS5_GPIO_MODE_SYS_PWR_REG 0x1300
+#define EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG 0x1320
+#define EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG 0x1340
+#define EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG 0x1344
+#define EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG 0x1348
+#define EXYNOS5_GSCL_SYS_PWR_REG 0x1400
+#define EXYNOS5_ISP_SYS_PWR_REG 0x1404
+#define EXYNOS5_MFC_SYS_PWR_REG 0x1408
+#define EXYNOS5_G3D_SYS_PWR_REG 0x140C
+#define EXYNOS5_DISP1_SYS_PWR_REG 0x1414
+#define EXYNOS5_MAU_SYS_PWR_REG 0x1418
+#define EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG 0x1480
+#define EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG 0x1484
+#define EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG 0x1488
+#define EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG 0x148C
+#define EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG 0x1494
+#define EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG 0x1498
+#define EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG 0x14C0
+#define EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG 0x14C4
+#define EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG 0x14C8
+#define EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG 0x14CC
+#define EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG 0x14D4
+#define EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG 0x14D8
+#define EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG 0x1580
+#define EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG 0x1584
+#define EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG 0x1588
+#define EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG 0x158C
+#define EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG 0x1594
+#define EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG 0x1598
-#define EXYNOS5_ARM_CORE0_OPTION S5P_PMUREG(0x2008)
-#define EXYNOS5_ARM_CORE1_OPTION S5P_PMUREG(0x2088)
-#define EXYNOS5_FSYS_ARM_OPTION S5P_PMUREG(0x2208)
-#define EXYNOS5_ISP_ARM_OPTION S5P_PMUREG(0x2288)
-#define EXYNOS5_ARM_COMMON_OPTION S5P_PMUREG(0x2408)
-#define EXYNOS5_ARM_L2_OPTION S5P_PMUREG(0x2608)
-#define EXYNOS5_TOP_PWR_OPTION S5P_PMUREG(0x2C48)
-#define EXYNOS5_TOP_PWR_SYSMEM_OPTION S5P_PMUREG(0x2CC8)
-#define EXYNOS5_JPEG_MEM_OPTION S5P_PMUREG(0x2F48)
-#define EXYNOS5_GSCL_OPTION S5P_PMUREG(0x4008)
-#define EXYNOS5_ISP_OPTION S5P_PMUREG(0x4028)
-#define EXYNOS5_MFC_OPTION S5P_PMUREG(0x4048)
-#define EXYNOS5_G3D_OPTION S5P_PMUREG(0x4068)
-#define EXYNOS5_DISP1_OPTION S5P_PMUREG(0x40A8)
-#define EXYNOS5_MAU_OPTION S5P_PMUREG(0x40C8)
+#define EXYNOS5_ARM_CORE0_OPTION 0x2008
+#define EXYNOS5_ARM_CORE1_OPTION 0x2088
+#define EXYNOS5_FSYS_ARM_OPTION 0x2208
+#define EXYNOS5_ISP_ARM_OPTION 0x2288
+#define EXYNOS5_ARM_COMMON_OPTION 0x2408
+#define EXYNOS5_ARM_L2_OPTION 0x2608
+#define EXYNOS5_TOP_PWR_OPTION 0x2C48
+#define EXYNOS5_TOP_PWR_SYSMEM_OPTION 0x2CC8
+#define EXYNOS5_JPEG_MEM_OPTION 0x2F48
+#define EXYNOS5_GSCL_OPTION 0x4008
+#define EXYNOS5_ISP_OPTION 0x4028
+#define EXYNOS5_MFC_OPTION 0x4048
+#define EXYNOS5_G3D_OPTION 0x4068
+#define EXYNOS5_DISP1_OPTION 0x40A8
+#define EXYNOS5_MAU_OPTION 0x40C8
#define EXYNOS5_USE_SC_FEEDBACK (1 << 1)
#define EXYNOS5_USE_SC_COUNTER (1 << 0)
@@ -319,4 +317,13 @@
#define EXYNOS5420_SWRESET_KFC_SEL 0x3
+#include <asm/cputype.h>
+#define MAX_CPUS_IN_CLUSTER 4
+
+static inline unsigned int exynos_pmu_cpunr(unsigned int mpidr)
+{
+ return ((MPIDR_AFFINITY_LEVEL(mpidr, 1) * MAX_CPUS_IN_CLUSTER)
+ + MPIDR_AFFINITY_LEVEL(mpidr, 0));
+}
+
#endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 4b51857..2bc7b97 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -65,18 +65,8 @@
config ARCH_MXC_IOMUX_V3
bool
-config ARCH_MX1
- bool
-
-config ARCH_MX25
- bool
-
-config MACH_MX27
- bool
-
config SOC_IMX1
bool
- select ARCH_MX1
select CPU_ARM920T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
@@ -89,7 +79,6 @@
config SOC_IMX25
bool
- select ARCH_MX25
select ARCH_MXC_IOMUX_V3
select CPU_ARM926T
select MXC_AVIC
@@ -100,7 +89,6 @@
select ARCH_HAS_OPP
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
- select MACH_MX27
select MXC_AVIC
select PINCTRL_IMX27
@@ -119,18 +107,6 @@
select PINCTRL_IMX35
select SMP_ON_UP if SMP
-config SOC_IMX5
- bool
- select ARCH_HAS_OPP
- select ARCH_MXC_IOMUX_V3
- select MXC_TZIC
-
-config SOC_IMX51
- bool
- select HAVE_IMX_SRC
- select PINCTRL_IMX51
- select SOC_IMX5
-
if ARCH_MULTI_V4T
comment "MX1 platforms:"
@@ -366,15 +342,6 @@
This includes specific configurations for the board and its
peripherals.
-config MACH_IMX27LITE
- bool "LogicPD MX27 LITEKIT platform"
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX27
- help
- Include support for MX27 LITEKIT platform. This includes specific
- configurations for the board and its peripherals.
-
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
@@ -406,15 +373,6 @@
Include support for i-MXT (aka td60) platform. This
includes specific configurations for the module and its peripherals.
-config MACH_IMX27IPCAM
- bool "IMX27 IPCAM platform"
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX27
- help
- Include support for IMX27 IPCAM platform. This includes specific
- configurations for the board and its peripherals.
-
config MACH_IMX27_DT
bool "Support i.MX27 platforms from device tree"
select SOC_IMX27
@@ -700,24 +658,29 @@
comment "Device tree only"
+config SOC_IMX5
+ bool
+ select ARCH_HAS_OPP
+ select HAVE_IMX_SRC
+ select MXC_TZIC
+
config SOC_IMX50
bool "i.MX50 support"
- select HAVE_IMX_SRC
select PINCTRL_IMX50
select SOC_IMX5
help
This enables support for Freescale i.MX50 processor.
-config MACH_IMX51_DT
+config SOC_IMX51
bool "i.MX51 support"
- select SOC_IMX51
+ select PINCTRL_IMX51
+ select SOC_IMX5
help
This enables support for Freescale i.MX51 processor
config SOC_IMX53
bool "i.MX53 support"
- select HAVE_IMX_SRC
select PINCTRL_IMX53
select SOC_IMX5
@@ -734,8 +697,6 @@
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select MFD_SYSCON
- select PL310_ERRATA_588369 if CACHE_L2X0
- select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
config SOC_IMX6Q
@@ -771,8 +732,6 @@
select ARM_GIC
select PINCTRL_VF610
select VF_PIT_TIMER
- select PL310_ERRATA_588369 if CACHE_L2X0
- select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
help
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index bbe93bb..ac88599 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -12,7 +12,7 @@
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
imx5-pm-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y)
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o $(imx5-pm-y)
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
clk-pfd.o clk-busy.o clk.o \
@@ -31,6 +31,8 @@
obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
+# i.MX6SX reuses i.MX6Q cpuidle driver
+obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6q.o
endif
ifdef CONFIG_SND_IMX_SOC
@@ -38,9 +40,6 @@
obj-y += ssi-fiq-ksym.o
endif
-# Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
-
# i.MX1 based machines
obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
@@ -60,13 +59,11 @@
obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
-obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
-obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
# i.MX31 based machines
@@ -109,8 +106,8 @@
endif
obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
-obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
+obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o
diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
index 7f739be..37c307a 100644
--- a/arch/arm/mach-imx/clk-imx1.c
+++ b/arch/arm/mach-imx/clk-imx1.c
@@ -15,100 +15,103 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
*/
-#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/clk.h>
-#include <linux/io.h>
#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/imx1-clock.h>
#include "clk.h"
#include "common.h"
#include "hardware.h"
-/* CCM register addresses */
-#define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
-
-#define CCM_CSCR IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
-#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
-#define CCM_PCDR IO_ADDR_CCM(0x20)
-
-/* SCM register addresses */
-#define IO_ADDR_SCM(off) (MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
-
-#define SCM_GCCR IO_ADDR_SCM(0xc)
-
static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", };
static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m",
"prem", "fclk", };
-enum imx1_clks {
- dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, mpll_gate,
- spll, spll_gate, mcu, fclk, hclk, clk48m, per1, per2, per3, clko,
- uart3_gate, ssi2_gate, brom_gate, dma_gate, csi_gate, mma_gate,
- usbd_gate, clk_max
-};
+static struct clk *clk[IMX1_CLK_MAX];
+static struct clk_onecell_data clk_data;
-static struct clk *clk[clk_max];
+static void __iomem *ccm __initdata;
+#define CCM_CSCR (ccm + 0x0000)
+#define CCM_MPCTL0 (ccm + 0x0004)
+#define CCM_SPCTL0 (ccm + 0x000c)
+#define CCM_PCDR (ccm + 0x0020)
+#define SCM_GCCR (ccm + 0x0810)
+
+static void __init _mx1_clocks_init(unsigned long fref)
+{
+ clk[IMX1_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX1_CLK_CLK32] = imx_obtain_fixed_clock("clk32", fref);
+ clk[IMX1_CLK_CLK16M_EXT] = imx_clk_fixed("clk16m_ext", 16000000);
+ clk[IMX1_CLK_CLK16M] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
+ clk[IMX1_CLK_CLK32_PREMULT] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
+ clk[IMX1_CLK_PREM] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks, ARRAY_SIZE(prem_sel_clks));
+ clk[IMX1_CLK_MPLL] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
+ clk[IMX1_CLK_MPLL_GATE] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
+ clk[IMX1_CLK_SPLL] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
+ clk[IMX1_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+ clk[IMX1_CLK_MCU] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
+ clk[IMX1_CLK_FCLK] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1);
+ clk[IMX1_CLK_HCLK] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4);
+ clk[IMX1_CLK_CLK48M] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3);
+ clk[IMX1_CLK_PER1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4);
+ clk[IMX1_CLK_PER2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4);
+ clk[IMX1_CLK_PER3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7);
+ clk[IMX1_CLK_CLKO] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
+ clk[IMX1_CLK_UART3_GATE] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6);
+ clk[IMX1_CLK_SSI2_GATE] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5);
+ clk[IMX1_CLK_BROM_GATE] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4);
+ clk[IMX1_CLK_DMA_GATE] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3);
+ clk[IMX1_CLK_CSI_GATE] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
+ clk[IMX1_CLK_MMA_GATE] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
+ clk[IMX1_CLK_USBD_GATE] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+}
int __init mx1_clocks_init(unsigned long fref)
{
- int i;
+ ccm = MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR);
- clk[dummy] = imx_clk_fixed("dummy", 0);
- clk[clk32] = imx_clk_fixed("clk32", fref);
- clk[clk16m_ext] = imx_clk_fixed("clk16m_ext", 16000000);
- clk[clk16m] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
- clk[clk32_premult] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
- clk[prem] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks,
- ARRAY_SIZE(prem_sel_clks));
- clk[mpll] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
- clk[mpll_gate] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
- clk[spll] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
- clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
- clk[mcu] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
- clk[fclk] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1);
- clk[hclk] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4);
- clk[clk48m] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3);
- clk[per1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4);
- clk[per2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4);
- clk[per3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7);
- clk[clko] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks,
- ARRAY_SIZE(clko_sel_clks));
- clk[uart3_gate] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6);
- clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5);
- clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4);
- clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3);
- clk[csi_gate] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
- clk[mma_gate] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
- clk[usbd_gate] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
+ _mx1_clocks_init(fref);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("imx1 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
-
- clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma");
- clk_register_clkdev(clk[hclk], "ipg", "imx1-dma");
- clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
- clk_register_clkdev(clk[hclk], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[per1], "per", "imx1-uart.0");
- clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.0");
- clk_register_clkdev(clk[per1], "per", "imx1-uart.1");
- clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
- clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
- clk_register_clkdev(clk[uart3_gate], "ipg", "imx1-uart.2");
- clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0");
- clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
- clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
- clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
- clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
- clk_register_clkdev(clk[per2], "per", "imx1-fb.0");
- clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0");
- clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0");
+ clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX1_CLK_DMA_GATE], "ahb", "imx1-dma");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-dma");
+ clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.0");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.0");
+ clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.1");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.1");
+ clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.2");
+ clk_register_clkdev(clk[IMX1_CLK_UART3_GATE], "ipg", "imx1-uart.2");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], NULL, "imx1-i2c.0");
+ clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.0");
+ clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.0");
+ clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.1");
+ clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.1");
+ clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-fb.0");
+ clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-fb.0");
+ clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ahb", "imx1-fb.0");
mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
return 0;
}
+
+static void __init mx1_clocks_init_dt(struct device_node *np)
+{
+ ccm = of_iomap(np, 0);
+ BUG_ON(!ccm);
+
+ _mx1_clocks_init(32768);
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(imx1_ccm, "fsl,imx1-ccm", mx1_clocks_init_dt);
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index bdc2e46..4b4c753 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -7,178 +7,165 @@
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
*/
#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/err.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/imx21-clock.h>
#include "clk.h"
#include "common.h"
#include "hardware.h"
-#define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+static void __iomem *ccm __initdata;
/* Register offsets */
-#define CCM_CSCR IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
-#define CCM_PCDR0 IO_ADDR_CCM(0x18)
-#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0 IO_ADDR_CCM(0x20)
-#define CCM_PCCR1 IO_ADDR_CCM(0x24)
-#define CCM_CCSR IO_ADDR_CCM(0x28)
-#define CCM_PMCTL IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
+#define CCM_CSCR (ccm + 0x00)
+#define CCM_MPCTL0 (ccm + 0x04)
+#define CCM_SPCTL0 (ccm + 0x0c)
+#define CCM_PCDR0 (ccm + 0x18)
+#define CCM_PCDR1 (ccm + 0x1c)
+#define CCM_PCCR0 (ccm + 0x20)
+#define CCM_PCCR1 (ccm + 0x24)
-static const char *mpll_sel_clks[] = { "fpm", "ckih", };
-static const char *spll_sel_clks[] = { "fpm", "ckih", };
+static const char *mpll_osc_sel_clks[] = { "ckih_gate", "ckih_div1p5", };
+static const char *mpll_sel_clks[] = { "fpm_gate", "mpll_osc_sel", };
+static const char *spll_sel_clks[] = { "fpm_gate", "mpll_osc_sel", };
+static const char *ssi_sel_clks[] = { "spll_gate", "mpll_gate", };
-enum imx21_clks {
- ckil, ckih, fpm, mpll_sel, spll_sel, mpll, spll, fclk, hclk, ipg, per1,
- per2, per3, per4, uart1_ipg_gate, uart2_ipg_gate, uart3_ipg_gate,
- uart4_ipg_gate, gpt1_ipg_gate, gpt2_ipg_gate, gpt3_ipg_gate,
- pwm_ipg_gate, sdhc1_ipg_gate, sdhc2_ipg_gate, lcdc_ipg_gate,
- lcdc_hclk_gate, cspi3_ipg_gate, cspi2_ipg_gate, cspi1_ipg_gate,
- per4_gate, csi_hclk_gate, usb_div, usb_gate, usb_hclk_gate, ssi1_gate,
- ssi2_gate, nfc_div, nfc_gate, dma_gate, dma_hclk_gate, brom_gate,
- emma_gate, emma_hclk_gate, slcdc_gate, slcdc_hclk_gate, wdog_gate,
- gpio_gate, i2c_gate, kpp_gate, owire_gate, rtc_gate, clk_max
-};
+static struct clk *clk[IMX21_CLK_MAX];
+static struct clk_onecell_data clk_data;
-static struct clk *clk[clk_max];
+static void __init _mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+ BUG_ON(!ccm);
-/*
- * must be called very early to get information about the
- * available clock rate when the timer framework starts
- */
+ clk[IMX21_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX21_CLK_CKIL] = imx_obtain_fixed_clock("ckil", lref);
+ clk[IMX21_CLK_CKIH] = imx_obtain_fixed_clock("ckih", href);
+ clk[IMX21_CLK_FPM] = imx_clk_fixed_factor("fpm", "ckil", 512, 1);
+ clk[IMX21_CLK_CKIH_DIV1P5] = imx_clk_fixed_factor("ckih_div1p5", "ckih_gate", 2, 3);
+
+ clk[IMX21_CLK_MPLL_GATE] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
+ clk[IMX21_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+ clk[IMX21_CLK_FPM_GATE] = imx_clk_gate("fpm_gate", "fpm", CCM_CSCR, 2);
+ clk[IMX21_CLK_CKIH_GATE] = imx_clk_gate_dis("ckih_gate", "ckih", CCM_CSCR, 3);
+ clk[IMX21_CLK_MPLL_OSC_SEL] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, mpll_osc_sel_clks, ARRAY_SIZE(mpll_osc_sel_clks));
+ clk[IMX21_CLK_IPG] = imx_clk_divider("ipg", "hclk", CCM_CSCR, 9, 1);
+ clk[IMX21_CLK_HCLK] = imx_clk_divider("hclk", "fclk", CCM_CSCR, 10, 4);
+ clk[IMX21_CLK_MPLL_SEL] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, ARRAY_SIZE(mpll_sel_clks));
+ clk[IMX21_CLK_SPLL_SEL] = imx_clk_mux("spll_sel", CCM_CSCR, 17, 1, spll_sel_clks, ARRAY_SIZE(spll_sel_clks));
+ clk[IMX21_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", CCM_CSCR, 19, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[IMX21_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", CCM_CSCR, 20, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[IMX21_CLK_USB_DIV] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 26, 3);
+ clk[IMX21_CLK_FCLK] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 29, 3);
+
+ clk[IMX21_CLK_MPLL] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
+
+ clk[IMX21_CLK_SPLL] = imx_clk_pllv1("spll", "spll_sel", CCM_SPCTL0);
+
+ clk[IMX21_CLK_NFC_DIV] = imx_clk_divider("nfc_div", "fclk", CCM_PCDR0, 12, 4);
+ clk[IMX21_CLK_SSI1_DIV] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
+ clk[IMX21_CLK_SSI2_DIV] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
+
+ clk[IMX21_CLK_PER1] = imx_clk_divider("per1", "mpll_gate", CCM_PCDR1, 0, 6);
+ clk[IMX21_CLK_PER2] = imx_clk_divider("per2", "mpll_gate", CCM_PCDR1, 8, 6);
+ clk[IMX21_CLK_PER3] = imx_clk_divider("per3", "mpll_gate", CCM_PCDR1, 16, 6);
+ clk[IMX21_CLK_PER4] = imx_clk_divider("per4", "mpll_gate", CCM_PCDR1, 24, 6);
+
+ clk[IMX21_CLK_UART1_IPG_GATE] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR0, 0);
+ clk[IMX21_CLK_UART2_IPG_GATE] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR0, 1);
+ clk[IMX21_CLK_UART3_IPG_GATE] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR0, 2);
+ clk[IMX21_CLK_UART4_IPG_GATE] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR0, 3);
+ clk[IMX21_CLK_CSPI1_IPG_GATE] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 4);
+ clk[IMX21_CLK_CSPI2_IPG_GATE] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 5);
+ clk[IMX21_CLK_SSI1_GATE] = imx_clk_gate("ssi1_gate", "ipg", CCM_PCCR0, 6);
+ clk[IMX21_CLK_SSI2_GATE] = imx_clk_gate("ssi2_gate", "ipg", CCM_PCCR0, 7);
+ clk[IMX21_CLK_SDHC1_IPG_GATE] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 9);
+ clk[IMX21_CLK_SDHC2_IPG_GATE] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 10);
+ clk[IMX21_CLK_GPIO_GATE] = imx_clk_gate("gpio_gate", "ipg", CCM_PCCR0, 11);
+ clk[IMX21_CLK_I2C_GATE] = imx_clk_gate("i2c_gate", "ipg", CCM_PCCR0, 12);
+ clk[IMX21_CLK_DMA_GATE] = imx_clk_gate("dma_gate", "ipg", CCM_PCCR0, 13);
+ clk[IMX21_CLK_USB_GATE] = imx_clk_gate("usb_gate", "usb_div", CCM_PCCR0, 14);
+ clk[IMX21_CLK_EMMA_GATE] = imx_clk_gate("emma_gate", "ipg", CCM_PCCR0, 15);
+ clk[IMX21_CLK_SSI2_BAUD_GATE] = imx_clk_gate("ssi2_baud_gate", "ipg", CCM_PCCR0, 16);
+ clk[IMX21_CLK_SSI1_BAUD_GATE] = imx_clk_gate("ssi1_baud_gate", "ipg", CCM_PCCR0, 17);
+ clk[IMX21_CLK_LCDC_IPG_GATE] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 18);
+ clk[IMX21_CLK_NFC_GATE] = imx_clk_gate("nfc_gate", "nfc_div", CCM_PCCR0, 19);
+ clk[IMX21_CLK_SLCDC_HCLK_GATE] = imx_clk_gate("slcdc_hclk_gate", "hclk", CCM_PCCR0, 21);
+ clk[IMX21_CLK_PER4_GATE] = imx_clk_gate("per4_gate", "per4", CCM_PCCR0, 22);
+ clk[IMX21_CLK_BMI_GATE] = imx_clk_gate("bmi_gate", "hclk", CCM_PCCR0, 23);
+ clk[IMX21_CLK_USB_HCLK_GATE] = imx_clk_gate("usb_hclk_gate", "hclk", CCM_PCCR0, 24);
+ clk[IMX21_CLK_SLCDC_GATE] = imx_clk_gate("slcdc_gate", "hclk", CCM_PCCR0, 25);
+ clk[IMX21_CLK_LCDC_HCLK_GATE] = imx_clk_gate("lcdc_hclk_gate", "hclk", CCM_PCCR0, 26);
+ clk[IMX21_CLK_EMMA_HCLK_GATE] = imx_clk_gate("emma_hclk_gate", "hclk", CCM_PCCR0, 27);
+ clk[IMX21_CLK_BROM_GATE] = imx_clk_gate("brom_gate", "hclk", CCM_PCCR0, 28);
+ clk[IMX21_CLK_DMA_HCLK_GATE] = imx_clk_gate("dma_hclk_gate", "hclk", CCM_PCCR0, 30);
+ clk[IMX21_CLK_CSI_HCLK_GATE] = imx_clk_gate("csi_hclk_gate", "hclk", CCM_PCCR0, 31);
+
+ clk[IMX21_CLK_CSPI3_IPG_GATE] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR1, 23);
+ clk[IMX21_CLK_WDOG_GATE] = imx_clk_gate("wdog_gate", "ipg", CCM_PCCR1, 24);
+ clk[IMX21_CLK_GPT1_IPG_GATE] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR1, 25);
+ clk[IMX21_CLK_GPT2_IPG_GATE] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR1, 26);
+ clk[IMX21_CLK_GPT3_IPG_GATE] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR1, 27);
+ clk[IMX21_CLK_PWM_IPG_GATE] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR1, 28);
+ clk[IMX21_CLK_RTC_GATE] = imx_clk_gate("rtc_gate", "ipg", CCM_PCCR1, 29);
+ clk[IMX21_CLK_KPP_GATE] = imx_clk_gate("kpp_gate", "ipg", CCM_PCCR1, 30);
+ clk[IMX21_CLK_OWIRE_GATE] = imx_clk_gate("owire_gate", "ipg", CCM_PCCR1, 31);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+}
+
int __init mx21_clocks_init(unsigned long lref, unsigned long href)
{
- int i;
+ ccm = ioremap(MX21_CCM_BASE_ADDR, SZ_2K);
- clk[ckil] = imx_clk_fixed("ckil", lref);
- clk[ckih] = imx_clk_fixed("ckih", href);
- clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 512, 1);
- clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks,
- ARRAY_SIZE(mpll_sel_clks));
- clk[spll_sel] = imx_clk_mux("spll_sel", CCM_CSCR, 17, 1, spll_sel_clks,
- ARRAY_SIZE(spll_sel_clks));
- clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
- clk[spll] = imx_clk_pllv1("spll", "spll_sel", CCM_SPCTL0);
- clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 29, 3);
- clk[hclk] = imx_clk_divider("hclk", "fclk", CCM_CSCR, 10, 4);
- clk[ipg] = imx_clk_divider("ipg", "hclk", CCM_CSCR, 9, 1);
- clk[per1] = imx_clk_divider("per1", "mpll", CCM_PCDR1, 0, 6);
- clk[per2] = imx_clk_divider("per2", "mpll", CCM_PCDR1, 8, 6);
- clk[per3] = imx_clk_divider("per3", "mpll", CCM_PCDR1, 16, 6);
- clk[per4] = imx_clk_divider("per4", "mpll", CCM_PCDR1, 24, 6);
- clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR0, 0);
- clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR0, 1);
- clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR0, 2);
- clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR0, 3);
- clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR1, 25);
- clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR1, 26);
- clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR1, 27);
- clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR1, 28);
- clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 9);
- clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 10);
- clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 18);
- clk[lcdc_hclk_gate] = imx_clk_gate("lcdc_hclk_gate", "hclk", CCM_PCCR0, 26);
- clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR1, 23);
- clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 5);
- clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 4);
- clk[per4_gate] = imx_clk_gate("per4_gate", "per4", CCM_PCCR0, 22);
- clk[csi_hclk_gate] = imx_clk_gate("csi_hclk_gate", "hclk", CCM_PCCR0, 31);
- clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 26, 3);
- clk[usb_gate] = imx_clk_gate("usb_gate", "usb_div", CCM_PCCR0, 14);
- clk[usb_hclk_gate] = imx_clk_gate("usb_hclk_gate", "hclk", CCM_PCCR0, 24);
- clk[ssi1_gate] = imx_clk_gate("ssi1_gate", "ipg", CCM_PCCR0, 6);
- clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "ipg", CCM_PCCR0, 7);
- clk[nfc_div] = imx_clk_divider("nfc_div", "ipg", CCM_PCDR0, 12, 4);
- clk[nfc_gate] = imx_clk_gate("nfc_gate", "nfc_div", CCM_PCCR0, 19);
- clk[dma_gate] = imx_clk_gate("dma_gate", "ipg", CCM_PCCR0, 13);
- clk[dma_hclk_gate] = imx_clk_gate("dma_hclk_gate", "hclk", CCM_PCCR0, 30);
- clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", CCM_PCCR0, 28);
- clk[emma_gate] = imx_clk_gate("emma_gate", "ipg", CCM_PCCR0, 15);
- clk[emma_hclk_gate] = imx_clk_gate("emma_hclk_gate", "hclk", CCM_PCCR0, 27);
- clk[slcdc_gate] = imx_clk_gate("slcdc_gate", "ipg", CCM_PCCR0, 25);
- clk[slcdc_hclk_gate] = imx_clk_gate("slcdc_hclk_gate", "hclk", CCM_PCCR0, 21);
- clk[wdog_gate] = imx_clk_gate("wdog_gate", "ipg", CCM_PCCR1, 24);
- clk[gpio_gate] = imx_clk_gate("gpio_gate", "ipg", CCM_PCCR0, 11);
- clk[i2c_gate] = imx_clk_gate("i2c_gate", "ipg", CCM_PCCR0, 12);
- clk[kpp_gate] = imx_clk_gate("kpp_gate", "ipg", CCM_PCCR1, 30);
- clk[owire_gate] = imx_clk_gate("owire_gate", "ipg", CCM_PCCR1, 31);
- clk[rtc_gate] = imx_clk_gate("rtc_gate", "ipg", CCM_PCCR1, 29);
+ _mx21_clocks_init(lref, href);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX21 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
-
- clk_register_clkdev(clk[per1], "per1", NULL);
- clk_register_clkdev(clk[per2], "per2", NULL);
- clk_register_clkdev(clk[per3], "per3", NULL);
- clk_register_clkdev(clk[per4], "per4", NULL);
- clk_register_clkdev(clk[per1], "per", "imx21-uart.0");
- clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[per1], "per", "imx21-uart.1");
- clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[per1], "per", "imx21-uart.2");
- clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[per1], "per", "imx21-uart.3");
- clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
- clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
- clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1");
- clk_register_clkdev(clk[per1], "per", "imx-gpt.1");
- clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
- clk_register_clkdev(clk[per1], "per", "imx-gpt.2");
- clk_register_clkdev(clk[per2], "per", "imx21-cspi.0");
- clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx21-cspi.0");
- clk_register_clkdev(clk[per2], "per", "imx21-cspi.1");
- clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx21-cspi.1");
- clk_register_clkdev(clk[per2], "per", "imx21-cspi.2");
- clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx21-cspi.2");
- clk_register_clkdev(clk[per3], "per", "imx21-fb.0");
- clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
- clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx21-fb.0");
- clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0");
- clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0");
- clk_register_clkdev(clk[nfc_gate], NULL, "imx21-nand.0");
- clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx21-dma");
- clk_register_clkdev(clk[dma_gate], "ipg", "imx21-dma");
- clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[i2c_gate], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[kpp_gate], NULL, "mxc-keypad");
- clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
- clk_register_clkdev(clk[brom_gate], "brom", NULL);
- clk_register_clkdev(clk[emma_gate], "emma", NULL);
- clk_register_clkdev(clk[slcdc_gate], "slcdc", NULL);
- clk_register_clkdev(clk[gpio_gate], "gpio", NULL);
- clk_register_clkdev(clk[rtc_gate], "rtc", NULL);
- clk_register_clkdev(clk[csi_hclk_gate], "csi", NULL);
- clk_register_clkdev(clk[ssi1_gate], "ssi1", NULL);
- clk_register_clkdev(clk[ssi2_gate], "ssi2", NULL);
- clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
- clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[IMX21_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[IMX21_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[IMX21_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[IMX21_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[IMX21_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.0");
+ clk_register_clkdev(clk[IMX21_CLK_CSPI1_IPG_GATE], "ipg", "imx21-cspi.0");
+ clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.1");
+ clk_register_clkdev(clk[IMX21_CLK_CSPI2_IPG_GATE], "ipg", "imx21-cspi.1");
+ clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.2");
+ clk_register_clkdev(clk[IMX21_CLK_CSPI3_IPG_GATE], "ipg", "imx21-cspi.2");
+ clk_register_clkdev(clk[IMX21_CLK_PER3], "per", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX21_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX21_CLK_LCDC_HCLK_GATE], "ahb", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX21_CLK_USB_GATE], "per", "imx21-hcd.0");
+ clk_register_clkdev(clk[IMX21_CLK_USB_HCLK_GATE], "ahb", "imx21-hcd.0");
+ clk_register_clkdev(clk[IMX21_CLK_NFC_GATE], NULL, "imx21-nand.0");
+ clk_register_clkdev(clk[IMX21_CLK_DMA_HCLK_GATE], "ahb", "imx21-dma");
+ clk_register_clkdev(clk[IMX21_CLK_DMA_GATE], "ipg", "imx21-dma");
+ clk_register_clkdev(clk[IMX21_CLK_WDOG_GATE], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[IMX21_CLK_I2C_GATE], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[IMX21_CLK_OWIRE_GATE], NULL, "mxc_w1.0");
mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1);
return 0;
}
+
+static void __init mx21_clocks_init_dt(struct device_node *np)
+{
+ ccm = of_iomap(np, 0);
+
+ _mx21_clocks_init(32768, 26000000);
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(imx27_ccm, "fsl,imx21-ccm", mx21_clocks_init_dt);
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index ae578c0..59c0c85 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -32,8 +32,6 @@
#include "hardware.h"
#include "mx25.h"
-#define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
-
#define CCM_MPCTL 0x00
#define CCM_UPCTL 0x04
#define CCM_CCTL 0x08
@@ -56,7 +54,7 @@
#define CCM_LTR3 0x4c
#define CCM_MCR 0x64
-#define ccm(x) (CRM_BASE + (x))
+#define ccm(x) (ccm_base + (x))
static struct clk_onecell_data clk_data;
@@ -91,9 +89,10 @@
static struct clk *clk[clk_max];
-static int __init __mx25_clocks_init(unsigned long osc_rate)
+static int __init __mx25_clocks_init(unsigned long osc_rate,
+ void __iomem *ccm_base)
{
- int i;
+ BUG_ON(!ccm_base);
clk[dummy] = imx_clk_fixed("dummy", 0);
clk[osc] = imx_clk_fixed("osc", osc_rate);
@@ -224,19 +223,13 @@
/* CCM_CGCR2(19): reserved in datasheet, but used as wdt in FSL kernel */
clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX25 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_prepare_enable(clk[emi_ahb]);
/* Clock source for gpt must be derived from AHB */
clk_set_parent(clk[per5_sel], clk[ahb]);
- clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
-
/*
* Let's initially set up CLKO parent as ipg, since this configuration
* is used on some imx25 board designs to clock the audio codec.
@@ -248,8 +241,14 @@
int __init mx25_clocks_init(void)
{
- __mx25_clocks_init(24000000);
+ void __iomem *ccm;
+ ccm = ioremap(MX25_CRM_BASE_ADDR, SZ_16K);
+
+ __mx25_clocks_init(24000000, ccm);
+
+ clk_register_clkdev(clk[gpt1_ipg], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
/* i.mx25 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
@@ -314,29 +313,27 @@
return 0;
}
-int __init mx25_clocks_init_dt(void)
+static void __init mx25_clocks_init_dt(struct device_node *np)
{
- struct device_node *np;
+ struct device_node *refnp;
unsigned long osc_rate = 24000000;
+ void __iomem *ccm;
/* retrieve the freqency of fixed clocks from device tree */
- for_each_compatible_node(np, NULL, "fixed-clock") {
+ for_each_compatible_node(refnp, NULL, "fixed-clock") {
u32 rate;
- if (of_property_read_u32(np, "clock-frequency", &rate))
+ if (of_property_read_u32(refnp, "clock-frequency", &rate))
continue;
- if (of_device_is_compatible(np, "fsl,imx-osc"))
+ if (of_device_is_compatible(refnp, "fsl,imx-osc"))
osc_rate = rate;
}
- np = of_find_compatible_node(NULL, NULL, "fsl,imx25-ccm");
+ ccm = of_iomap(np, 0);
+ __mx25_clocks_init(osc_rate, ccm);
+
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-
- __mx25_clocks_init(osc_rate);
-
- mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt"));
-
- return 0;
}
+CLK_OF_DECLARE(imx25_ccm, "fsl,imx25-ccm", mx25_clocks_init_dt);
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 317a662..ab6349e 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -1,61 +1,36 @@
#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
+#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/err.h>
-#include <linux/clk-provider.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/imx27-clock.h>
#include "clk.h"
#include "common.h"
#include "hardware.h"
-#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+static void __iomem *ccm __initdata;
/* Register offsets */
-#define CCM_CSCR IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
-#define CCM_PCDR0 IO_ADDR_CCM(0x18)
-#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0 IO_ADDR_CCM(0x20)
-#define CCM_PCCR1 IO_ADDR_CCM(0x24)
-#define CCM_CCSR IO_ADDR_CCM(0x28)
-#define CCM_PMCTL IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
-
-#define CCM_CSCR_UPDATE_DIS (1 << 31)
-#define CCM_CSCR_SSI2 (1 << 23)
-#define CCM_CSCR_SSI1 (1 << 22)
-#define CCM_CSCR_VPU (1 << 21)
-#define CCM_CSCR_MSHC (1 << 20)
-#define CCM_CSCR_SPLLRES (1 << 19)
-#define CCM_CSCR_MPLLRES (1 << 18)
-#define CCM_CSCR_SP (1 << 17)
-#define CCM_CSCR_MCU (1 << 16)
-#define CCM_CSCR_OSC26MDIV (1 << 4)
-#define CCM_CSCR_OSC26M (1 << 3)
-#define CCM_CSCR_FPM (1 << 2)
-#define CCM_CSCR_SPEN (1 << 1)
-#define CCM_CSCR_MPEN (1 << 0)
-
-/* i.MX27 TO 2+ */
-#define CCM_CSCR_ARM_SRC (1 << 15)
-
-#define CCM_SPCTL1_LF (1 << 15)
-#define CCM_SPCTL1_BRMO (1 << 6)
+#define CCM_CSCR (ccm + 0x00)
+#define CCM_MPCTL0 (ccm + 0x04)
+#define CCM_MPCTL1 (ccm + 0x08)
+#define CCM_SPCTL0 (ccm + 0x0c)
+#define CCM_SPCTL1 (ccm + 0x10)
+#define CCM_PCDR0 (ccm + 0x18)
+#define CCM_PCDR1 (ccm + 0x1c)
+#define CCM_PCCR0 (ccm + 0x20)
+#define CCM_PCCR1 (ccm + 0x24)
+#define CCM_CCSR (ccm + 0x28)
static const char *vpu_sel_clks[] = { "spll", "mpll_main2", };
static const char *cpu_sel_clks[] = { "mpll_main2", "mpll", };
static const char *mpll_sel_clks[] = { "fpm", "mpll_osc_sel", };
-static const char *mpll_osc_sel_clks[] = { "ckih", "ckih_div1p5", };
+static const char *mpll_osc_sel_clks[] = { "ckih_gate", "ckih_div1p5", };
static const char *clko_sel_clks[] = {
- "ckil", "fpm", "ckih", "ckih",
- "ckih", "mpll", "spll", "cpu_div",
+ "ckil", "fpm", "ckih_gate", "ckih_gate",
+ "ckih_gate", "mpll", "spll", "cpu_div",
"ahb", "ipg", "per1_div", "per2_div",
"per3_div", "per4_div", "ssi1_div", "ssi2_div",
"nfc_div", "mshc_div", "vpu_div", "60m",
@@ -64,239 +39,220 @@
static const char *ssi_sel_clks[] = { "spll_gate", "mpll", };
-enum mx27_clks {
- dummy, ckih, ckil, mpll, spll, mpll_main2, ahb, ipg, nfc_div, per1_div,
- per2_div, per3_div, per4_div, vpu_sel, vpu_div, usb_div, cpu_sel,
- clko_sel, cpu_div, clko_div, ssi1_sel, ssi2_sel, ssi1_div, ssi2_div,
- clko_en, ssi2_ipg_gate, ssi1_ipg_gate, slcdc_ipg_gate, sdhc3_ipg_gate,
- sdhc2_ipg_gate, sdhc1_ipg_gate, scc_ipg_gate, sahara_ipg_gate,
- rtc_ipg_gate, pwm_ipg_gate, owire_ipg_gate, lcdc_ipg_gate,
- kpp_ipg_gate, iim_ipg_gate, i2c2_ipg_gate, i2c1_ipg_gate,
- gpt6_ipg_gate, gpt5_ipg_gate, gpt4_ipg_gate, gpt3_ipg_gate,
- gpt2_ipg_gate, gpt1_ipg_gate, gpio_ipg_gate, fec_ipg_gate,
- emma_ipg_gate, dma_ipg_gate, cspi3_ipg_gate, cspi2_ipg_gate,
- cspi1_ipg_gate, nfc_baud_gate, ssi2_baud_gate, ssi1_baud_gate,
- vpu_baud_gate, per4_gate, per3_gate, per2_gate, per1_gate,
- usb_ahb_gate, slcdc_ahb_gate, sahara_ahb_gate, lcdc_ahb_gate,
- vpu_ahb_gate, fec_ahb_gate, emma_ahb_gate, emi_ahb_gate, dma_ahb_gate,
- csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate,
- uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate,
- uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel,
- mpll_sel, spll_gate, mshc_div, rtic_ipg_gate, mshc_ipg_gate,
- rtic_ahb_gate, mshc_baud_gate, clk_max
-};
-
-static struct clk *clk[clk_max];
+static struct clk *clk[IMX27_CLK_MAX];
static struct clk_onecell_data clk_data;
+static void __init _mx27_clocks_init(unsigned long fref)
+{
+ BUG_ON(!ccm);
+
+ clk[IMX27_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX27_CLK_CKIH] = imx_clk_fixed("ckih", fref);
+ clk[IMX27_CLK_CKIL] = imx_clk_fixed("ckil", 32768);
+ clk[IMX27_CLK_FPM] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1);
+ clk[IMX27_CLK_CKIH_DIV1P5] = imx_clk_fixed_factor("ckih_div1p5", "ckih_gate", 2, 3);
+ clk[IMX27_CLK_CKIH_GATE] = imx_clk_gate_dis("ckih_gate", "ckih", CCM_CSCR, 3);
+ clk[IMX27_CLK_MPLL_OSC_SEL] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, mpll_osc_sel_clks, ARRAY_SIZE(mpll_osc_sel_clks));
+ clk[IMX27_CLK_MPLL_SEL] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, ARRAY_SIZE(mpll_sel_clks));
+ clk[IMX27_CLK_MPLL] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
+ clk[IMX27_CLK_SPLL] = imx_clk_pllv1("spll", "ckih_gate", CCM_SPCTL0);
+ clk[IMX27_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+ clk[IMX27_CLK_MPLL_MAIN2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
+
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
+ clk[IMX27_CLK_AHB] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 8, 2);
+ clk[IMX27_CLK_IPG] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+ } else {
+ clk[IMX27_CLK_AHB] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 9, 4);
+ clk[IMX27_CLK_IPG] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
+ }
+
+ clk[IMX27_CLK_MSHC_DIV] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6);
+ clk[IMX27_CLK_NFC_DIV] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
+ clk[IMX27_CLK_PER1_DIV] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
+ clk[IMX27_CLK_PER2_DIV] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
+ clk[IMX27_CLK_PER3_DIV] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
+ clk[IMX27_CLK_PER4_DIV] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
+ clk[IMX27_CLK_VPU_SEL] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
+ clk[IMX27_CLK_VPU_DIV] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
+ clk[IMX27_CLK_USB_DIV] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 28, 3);
+ clk[IMX27_CLK_CPU_SEL] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
+ clk[IMX27_CLK_CLKO_SEL] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
+
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
+ clk[IMX27_CLK_CPU_DIV] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 12, 2);
+ else
+ clk[IMX27_CLK_CPU_DIV] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 13, 3);
+
+ clk[IMX27_CLK_CLKO_DIV] = imx_clk_divider("clko_div", "clko_sel", CCM_PCDR0, 22, 3);
+ clk[IMX27_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[IMX27_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[IMX27_CLK_SSI1_DIV] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
+ clk[IMX27_CLK_SSI2_DIV] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
+ clk[IMX27_CLK_CLKO_EN] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
+ clk[IMX27_CLK_SSI2_IPG_GATE] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
+ clk[IMX27_CLK_SSI1_IPG_GATE] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
+ clk[IMX27_CLK_SLCDC_IPG_GATE] = imx_clk_gate("slcdc_ipg_gate", "ipg", CCM_PCCR0, 2);
+ clk[IMX27_CLK_SDHC3_IPG_GATE] = imx_clk_gate("sdhc3_ipg_gate", "ipg", CCM_PCCR0, 3);
+ clk[IMX27_CLK_SDHC2_IPG_GATE] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 4);
+ clk[IMX27_CLK_SDHC1_IPG_GATE] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
+ clk[IMX27_CLK_SCC_IPG_GATE] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
+ clk[IMX27_CLK_SAHARA_IPG_GATE] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
+ clk[IMX27_CLK_RTIC_IPG_GATE] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8);
+ clk[IMX27_CLK_RTC_IPG_GATE] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
+ clk[IMX27_CLK_PWM_IPG_GATE] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
+ clk[IMX27_CLK_OWIRE_IPG_GATE] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
+ clk[IMX27_CLK_MSHC_IPG_GATE] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13);
+ clk[IMX27_CLK_LCDC_IPG_GATE] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
+ clk[IMX27_CLK_KPP_IPG_GATE] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
+ clk[IMX27_CLK_IIM_IPG_GATE] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
+ clk[IMX27_CLK_I2C2_IPG_GATE] = imx_clk_gate("i2c2_ipg_gate", "ipg", CCM_PCCR0, 17);
+ clk[IMX27_CLK_I2C1_IPG_GATE] = imx_clk_gate("i2c1_ipg_gate", "ipg", CCM_PCCR0, 18);
+ clk[IMX27_CLK_GPT6_IPG_GATE] = imx_clk_gate("gpt6_ipg_gate", "ipg", CCM_PCCR0, 19);
+ clk[IMX27_CLK_GPT5_IPG_GATE] = imx_clk_gate("gpt5_ipg_gate", "ipg", CCM_PCCR0, 20);
+ clk[IMX27_CLK_GPT4_IPG_GATE] = imx_clk_gate("gpt4_ipg_gate", "ipg", CCM_PCCR0, 21);
+ clk[IMX27_CLK_GPT3_IPG_GATE] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR0, 22);
+ clk[IMX27_CLK_GPT2_IPG_GATE] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR0, 23);
+ clk[IMX27_CLK_GPT1_IPG_GATE] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR0, 24);
+ clk[IMX27_CLK_GPIO_IPG_GATE] = imx_clk_gate("gpio_ipg_gate", "ipg", CCM_PCCR0, 25);
+ clk[IMX27_CLK_FEC_IPG_GATE] = imx_clk_gate("fec_ipg_gate", "ipg", CCM_PCCR0, 26);
+ clk[IMX27_CLK_EMMA_IPG_GATE] = imx_clk_gate("emma_ipg_gate", "ipg", CCM_PCCR0, 27);
+ clk[IMX27_CLK_DMA_IPG_GATE] = imx_clk_gate("dma_ipg_gate", "ipg", CCM_PCCR0, 28);
+ clk[IMX27_CLK_CSPI3_IPG_GATE] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
+ clk[IMX27_CLK_CSPI2_IPG_GATE] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
+ clk[IMX27_CLK_CSPI1_IPG_GATE] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
+ clk[IMX27_CLK_MSHC_BAUD_GATE] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2);
+ clk[IMX27_CLK_NFC_BAUD_GATE] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1, 3);
+ clk[IMX27_CLK_SSI2_BAUD_GATE] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1, 4);
+ clk[IMX27_CLK_SSI1_BAUD_GATE] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1, 5);
+ clk[IMX27_CLK_VPU_BAUD_GATE] = imx_clk_gate("vpu_baud_gate", "vpu_div", CCM_PCCR1, 6);
+ clk[IMX27_CLK_PER4_GATE] = imx_clk_gate("per4_gate", "per4_div", CCM_PCCR1, 7);
+ clk[IMX27_CLK_PER3_GATE] = imx_clk_gate("per3_gate", "per3_div", CCM_PCCR1, 8);
+ clk[IMX27_CLK_PER2_GATE] = imx_clk_gate("per2_gate", "per2_div", CCM_PCCR1, 9);
+ clk[IMX27_CLK_PER1_GATE] = imx_clk_gate("per1_gate", "per1_div", CCM_PCCR1, 10);
+ clk[IMX27_CLK_USB_AHB_GATE] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
+ clk[IMX27_CLK_SLCDC_AHB_GATE] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
+ clk[IMX27_CLK_SAHARA_AHB_GATE] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
+ clk[IMX27_CLK_RTIC_AHB_GATE] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14);
+ clk[IMX27_CLK_LCDC_AHB_GATE] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
+ clk[IMX27_CLK_VPU_AHB_GATE] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
+ clk[IMX27_CLK_FEC_AHB_GATE] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
+ clk[IMX27_CLK_EMMA_AHB_GATE] = imx_clk_gate("emma_ahb_gate", "ahb", CCM_PCCR1, 18);
+ clk[IMX27_CLK_EMI_AHB_GATE] = imx_clk_gate("emi_ahb_gate", "ahb", CCM_PCCR1, 19);
+ clk[IMX27_CLK_DMA_AHB_GATE] = imx_clk_gate("dma_ahb_gate", "ahb", CCM_PCCR1, 20);
+ clk[IMX27_CLK_CSI_AHB_GATE] = imx_clk_gate("csi_ahb_gate", "ahb", CCM_PCCR1, 21);
+ clk[IMX27_CLK_BROM_AHB_GATE] = imx_clk_gate("brom_ahb_gate", "ahb", CCM_PCCR1, 22);
+ clk[IMX27_CLK_ATA_AHB_GATE] = imx_clk_gate("ata_ahb_gate", "ahb", CCM_PCCR1, 23);
+ clk[IMX27_CLK_WDOG_IPG_GATE] = imx_clk_gate("wdog_ipg_gate", "ipg", CCM_PCCR1, 24);
+ clk[IMX27_CLK_USB_IPG_GATE] = imx_clk_gate("usb_ipg_gate", "ipg", CCM_PCCR1, 25);
+ clk[IMX27_CLK_UART6_IPG_GATE] = imx_clk_gate("uart6_ipg_gate", "ipg", CCM_PCCR1, 26);
+ clk[IMX27_CLK_UART5_IPG_GATE] = imx_clk_gate("uart5_ipg_gate", "ipg", CCM_PCCR1, 27);
+ clk[IMX27_CLK_UART4_IPG_GATE] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR1, 28);
+ clk[IMX27_CLK_UART3_IPG_GATE] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR1, 29);
+ clk[IMX27_CLK_UART2_IPG_GATE] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR1, 30);
+ clk[IMX27_CLK_UART1_IPG_GATE] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR1, 31);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+
+ clk_register_clkdev(clk[IMX27_CLK_CPU_DIV], NULL, "cpu0");
+
+ clk_prepare_enable(clk[IMX27_CLK_EMI_AHB_GATE]);
+
+ imx_print_silicon_rev("i.MX27", mx27_revision());
+}
+
int __init mx27_clocks_init(unsigned long fref)
{
- int i;
- struct device_node *np;
+ ccm = ioremap(MX27_CCM_BASE_ADDR, SZ_4K);
- clk[dummy] = imx_clk_fixed("dummy", 0);
- clk[ckih] = imx_clk_fixed("ckih", fref);
- clk[ckil] = imx_clk_fixed("ckil", 32768);
- clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1);
- clk[ckih_div1p5] = imx_clk_fixed_factor("ckih_div1p5", "ckih", 2, 3);
+ _mx27_clocks_init(fref);
- clk[mpll_osc_sel] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1,
- mpll_osc_sel_clks,
- ARRAY_SIZE(mpll_osc_sel_clks));
- clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks,
- ARRAY_SIZE(mpll_sel_clks));
- clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
- clk[spll] = imx_clk_pllv1("spll", "ckih", CCM_SPCTL0);
- clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
- clk[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
- clk[ahb] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 8, 2);
- clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
- } else {
- clk[ahb] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 9, 4);
- clk[ipg] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
- }
-
- clk[mshc_div] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6);
- clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
- clk[per1_div] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
- clk[per2_div] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
- clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
- clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
- clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
- clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
- clk[usb_div] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 28, 3);
- clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
- clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
- clk[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 12, 2);
- else
- clk[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 13, 3);
- clk[clko_div] = imx_clk_divider("clko_div", "clko_sel", CCM_PCDR0, 22, 3);
- clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
- clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
- clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
- clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
- clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
- clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
- clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
- clk[slcdc_ipg_gate] = imx_clk_gate("slcdc_ipg_gate", "ipg", CCM_PCCR0, 2);
- clk[sdhc3_ipg_gate] = imx_clk_gate("sdhc3_ipg_gate", "ipg", CCM_PCCR0, 3);
- clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 4);
- clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
- clk[scc_ipg_gate] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
- clk[sahara_ipg_gate] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
- clk[rtic_ipg_gate] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8);
- clk[rtc_ipg_gate] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
- clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
- clk[owire_ipg_gate] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
- clk[mshc_ipg_gate] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13);
- clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
- clk[kpp_ipg_gate] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
- clk[iim_ipg_gate] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
- clk[i2c2_ipg_gate] = imx_clk_gate("i2c2_ipg_gate", "ipg", CCM_PCCR0, 17);
- clk[i2c1_ipg_gate] = imx_clk_gate("i2c1_ipg_gate", "ipg", CCM_PCCR0, 18);
- clk[gpt6_ipg_gate] = imx_clk_gate("gpt6_ipg_gate", "ipg", CCM_PCCR0, 19);
- clk[gpt5_ipg_gate] = imx_clk_gate("gpt5_ipg_gate", "ipg", CCM_PCCR0, 20);
- clk[gpt4_ipg_gate] = imx_clk_gate("gpt4_ipg_gate", "ipg", CCM_PCCR0, 21);
- clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR0, 22);
- clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR0, 23);
- clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR0, 24);
- clk[gpio_ipg_gate] = imx_clk_gate("gpio_ipg_gate", "ipg", CCM_PCCR0, 25);
- clk[fec_ipg_gate] = imx_clk_gate("fec_ipg_gate", "ipg", CCM_PCCR0, 26);
- clk[emma_ipg_gate] = imx_clk_gate("emma_ipg_gate", "ipg", CCM_PCCR0, 27);
- clk[dma_ipg_gate] = imx_clk_gate("dma_ipg_gate", "ipg", CCM_PCCR0, 28);
- clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
- clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
- clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
- clk[mshc_baud_gate] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2);
- clk[nfc_baud_gate] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1, 3);
- clk[ssi2_baud_gate] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1, 4);
- clk[ssi1_baud_gate] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1, 5);
- clk[vpu_baud_gate] = imx_clk_gate("vpu_baud_gate", "vpu_div", CCM_PCCR1, 6);
- clk[per4_gate] = imx_clk_gate("per4_gate", "per4_div", CCM_PCCR1, 7);
- clk[per3_gate] = imx_clk_gate("per3_gate", "per3_div", CCM_PCCR1, 8);
- clk[per2_gate] = imx_clk_gate("per2_gate", "per2_div", CCM_PCCR1, 9);
- clk[per1_gate] = imx_clk_gate("per1_gate", "per1_div", CCM_PCCR1, 10);
- clk[usb_ahb_gate] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
- clk[slcdc_ahb_gate] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
- clk[sahara_ahb_gate] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
- clk[rtic_ahb_gate] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14);
- clk[lcdc_ahb_gate] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
- clk[vpu_ahb_gate] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
- clk[fec_ahb_gate] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
- clk[emma_ahb_gate] = imx_clk_gate("emma_ahb_gate", "ahb", CCM_PCCR1, 18);
- clk[emi_ahb_gate] = imx_clk_gate("emi_ahb_gate", "ahb", CCM_PCCR1, 19);
- clk[dma_ahb_gate] = imx_clk_gate("dma_ahb_gate", "ahb", CCM_PCCR1, 20);
- clk[csi_ahb_gate] = imx_clk_gate("csi_ahb_gate", "ahb", CCM_PCCR1, 21);
- clk[brom_ahb_gate] = imx_clk_gate("brom_ahb_gate", "ahb", CCM_PCCR1, 22);
- clk[ata_ahb_gate] = imx_clk_gate("ata_ahb_gate", "ahb", CCM_PCCR1, 23);
- clk[wdog_ipg_gate] = imx_clk_gate("wdog_ipg_gate", "ipg", CCM_PCCR1, 24);
- clk[usb_ipg_gate] = imx_clk_gate("usb_ipg_gate", "ipg", CCM_PCCR1, 25);
- clk[uart6_ipg_gate] = imx_clk_gate("uart6_ipg_gate", "ipg", CCM_PCCR1, 26);
- clk[uart5_ipg_gate] = imx_clk_gate("uart5_ipg_gate", "ipg", CCM_PCCR1, 27);
- clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR1, 28);
- clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR1, 29);
- clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR1, 30);
- clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR1, 31);
-
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX27 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
- if (np) {
- clk_data.clks = clk;
- clk_data.clk_num = ARRAY_SIZE(clk);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- }
-
- clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.0");
- clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.1");
- clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.2");
- clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.3");
- clk_register_clkdev(clk[uart5_ipg_gate], "ipg", "imx21-uart.4");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.4");
- clk_register_clkdev(clk[uart6_ipg_gate], "ipg", "imx21-uart.5");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.5");
- clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.0");
- clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0");
- clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0");
- clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1");
- clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.1");
- clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.2");
- clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.2");
- clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.0");
- clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx27-cspi.0");
- clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.1");
- clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx27-cspi.1");
- clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.2");
- clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx27-cspi.2");
- clk_register_clkdev(clk[per3_gate], "per", "imx21-fb.0");
- clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
- clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
- clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
- clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
- clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
- clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
- clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
- clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
- clk_register_clkdev(clk[nfc_baud_gate], NULL, "imx27-nand.0");
- clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0");
- clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0");
- clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx27-dma");
- clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx27-dma");
- clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0");
- clk_register_clkdev(clk[fec_ahb_gate], "ahb", "imx27-fec.0");
- clk_register_clkdev(clk[wdog_ipg_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx21-i2c.1");
- clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
- clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
- clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "imx27-camera.0");
- clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "imx27-camera.0");
- clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0");
- clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0");
- clk_register_clkdev(clk[cpu_div], NULL, "cpu0");
+ clk_register_clkdev(clk[IMX27_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[IMX27_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[IMX27_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[IMX27_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[IMX27_CLK_UART5_IPG_GATE], "ipg", "imx21-uart.4");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.4");
+ clk_register_clkdev(clk[IMX27_CLK_UART6_IPG_GATE], "ipg", "imx21-uart.5");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.5");
+ clk_register_clkdev(clk[IMX27_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.0");
+ clk_register_clkdev(clk[IMX27_CLK_SDHC1_IPG_GATE], "ipg", "imx21-mmc.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.1");
+ clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.1");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.2");
+ clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.2");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.0");
+ clk_register_clkdev(clk[IMX27_CLK_CSPI1_IPG_GATE], "ipg", "imx27-cspi.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.1");
+ clk_register_clkdev(clk[IMX27_CLK_CSPI2_IPG_GATE], "ipg", "imx27-cspi.1");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.2");
+ clk_register_clkdev(clk[IMX27_CLK_CSPI3_IPG_GATE], "ipg", "imx27-cspi.2");
+ clk_register_clkdev(clk[IMX27_CLK_PER3_GATE], "per", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX27_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX27_CLK_LCDC_AHB_GATE], "ahb", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX27_CLK_CSI_AHB_GATE], "ahb", "imx27-camera.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER4_GATE], "per", "imx27-camera.0");
+ clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "imx-udc-mx27");
+ clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "imx-udc-mx27");
+ clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "imx-udc-mx27");
+ clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.0");
+ clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.0");
+ clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.0");
+ clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.1");
+ clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.1");
+ clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.1");
+ clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.2");
+ clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.2");
+ clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.2");
+ clk_register_clkdev(clk[IMX27_CLK_SSI1_IPG_GATE], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[IMX27_CLK_SSI2_IPG_GATE], NULL, "imx-ssi.1");
+ clk_register_clkdev(clk[IMX27_CLK_NFC_BAUD_GATE], NULL, "imx27-nand.0");
+ clk_register_clkdev(clk[IMX27_CLK_VPU_BAUD_GATE], "per", "coda-imx27.0");
+ clk_register_clkdev(clk[IMX27_CLK_VPU_AHB_GATE], "ahb", "coda-imx27.0");
+ clk_register_clkdev(clk[IMX27_CLK_DMA_AHB_GATE], "ahb", "imx27-dma");
+ clk_register_clkdev(clk[IMX27_CLK_DMA_IPG_GATE], "ipg", "imx27-dma");
+ clk_register_clkdev(clk[IMX27_CLK_FEC_IPG_GATE], "ipg", "imx27-fec.0");
+ clk_register_clkdev(clk[IMX27_CLK_FEC_AHB_GATE], "ahb", "imx27-fec.0");
+ clk_register_clkdev(clk[IMX27_CLK_WDOG_IPG_GATE], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[IMX27_CLK_I2C1_IPG_GATE], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[IMX27_CLK_I2C2_IPG_GATE], NULL, "imx21-i2c.1");
+ clk_register_clkdev(clk[IMX27_CLK_OWIRE_IPG_GATE], NULL, "mxc_w1.0");
+ clk_register_clkdev(clk[IMX27_CLK_KPP_IPG_GATE], NULL, "imx-keypad");
+ clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "emma-ahb", "imx27-camera.0");
+ clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "emma-ipg", "imx27-camera.0");
+ clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "ahb", "m2m-emmaprp.0");
+ clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "ipg", "m2m-emmaprp.0");
mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
- clk_prepare_enable(clk[emi_ahb_gate]);
-
- imx_print_silicon_rev("i.MX27", mx27_revision());
-
return 0;
}
-int __init mx27_clocks_init_dt(void)
+static void __init mx27_clocks_init_dt(struct device_node *np)
{
- struct device_node *np;
+ struct device_node *refnp;
u32 fref = 26000000; /* default */
- for_each_compatible_node(np, NULL, "fixed-clock") {
- if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
+ for_each_compatible_node(refnp, NULL, "fixed-clock") {
+ if (!of_device_is_compatible(refnp, "fsl,imx-osc26m"))
continue;
- if (!of_property_read_u32(np, "clock-frequency", &fref))
+ if (!of_property_read_u32(refnp, "clock-frequency", &fref))
break;
}
- return mx27_clocks_init(fref);
+ ccm = of_iomap(np, 0);
+
+ _mx27_clocks_init(fref);
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
}
+CLK_OF_DECLARE(imx27_ccm, "fsl,imx27-ccm", mx27_clocks_init_dt);
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index 4a9de08..286ef42 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -51,7 +51,6 @@
int __init mx31_clocks_init(unsigned long fref)
{
void __iomem *base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
- int i;
struct device_node *np;
clk[dummy] = imx_clk_fixed("dummy", 0);
@@ -114,10 +113,7 @@
clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MXC_CCM_CGR2, 10);
clk[firi_gate] = imx_clk_gate2("firi_gate", "upll", base+MXC_CCM_CGR2, 12);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("imx31 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 71c86a2..a0d2b57 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -75,7 +75,6 @@
u32 pdr0, consumer_sel, hsp_sel;
struct arm_ahb_div *aad;
unsigned char *hsp_div;
- u32 i;
pdr0 = __raw_readl(base + MXC_CCM_PDR0);
consumer_sel = (pdr0 >> 16) & 0xf;
@@ -200,10 +199,7 @@
clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3, 2);
clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3, 4);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX35 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 21d2b11..72d6521 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -18,11 +18,54 @@
#include <linux/of_irq.h>
#include <dt-bindings/clock/imx5-clock.h>
-#include "crm-regs-imx5.h"
#include "clk.h"
#include "common.h"
#include "hardware.h"
+#define MX51_DPLL1_BASE 0x83f80000
+#define MX51_DPLL2_BASE 0x83f84000
+#define MX51_DPLL3_BASE 0x83f88000
+
+#define MX53_DPLL1_BASE 0x63f80000
+#define MX53_DPLL2_BASE 0x63f84000
+#define MX53_DPLL3_BASE 0x63f88000
+#define MX53_DPLL4_BASE 0x63f8c000
+
+#define MXC_CCM_CCR (ccm_base + 0x00)
+#define MXC_CCM_CCDR (ccm_base + 0x04)
+#define MXC_CCM_CSR (ccm_base + 0x08)
+#define MXC_CCM_CCSR (ccm_base + 0x0c)
+#define MXC_CCM_CACRR (ccm_base + 0x10)
+#define MXC_CCM_CBCDR (ccm_base + 0x14)
+#define MXC_CCM_CBCMR (ccm_base + 0x18)
+#define MXC_CCM_CSCMR1 (ccm_base + 0x1c)
+#define MXC_CCM_CSCMR2 (ccm_base + 0x20)
+#define MXC_CCM_CSCDR1 (ccm_base + 0x24)
+#define MXC_CCM_CS1CDR (ccm_base + 0x28)
+#define MXC_CCM_CS2CDR (ccm_base + 0x2c)
+#define MXC_CCM_CDCDR (ccm_base + 0x30)
+#define MXC_CCM_CHSCDR (ccm_base + 0x34)
+#define MXC_CCM_CSCDR2 (ccm_base + 0x38)
+#define MXC_CCM_CSCDR3 (ccm_base + 0x3c)
+#define MXC_CCM_CSCDR4 (ccm_base + 0x40)
+#define MXC_CCM_CWDR (ccm_base + 0x44)
+#define MXC_CCM_CDHIPR (ccm_base + 0x48)
+#define MXC_CCM_CDCR (ccm_base + 0x4c)
+#define MXC_CCM_CTOR (ccm_base + 0x50)
+#define MXC_CCM_CLPCR (ccm_base + 0x54)
+#define MXC_CCM_CISR (ccm_base + 0x58)
+#define MXC_CCM_CIMR (ccm_base + 0x5c)
+#define MXC_CCM_CCOSR (ccm_base + 0x60)
+#define MXC_CCM_CGPR (ccm_base + 0x64)
+#define MXC_CCM_CCGR0 (ccm_base + 0x68)
+#define MXC_CCM_CCGR1 (ccm_base + 0x6c)
+#define MXC_CCM_CCGR2 (ccm_base + 0x70)
+#define MXC_CCM_CCGR3 (ccm_base + 0x74)
+#define MXC_CCM_CCGR4 (ccm_base + 0x78)
+#define MXC_CCM_CCGR5 (ccm_base + 0x7c)
+#define MXC_CCM_CCGR6 (ccm_base + 0x80)
+#define MXC_CCM_CCGR7 (ccm_base + 0x84)
+
/* Low-power Audio Playback Mode clock */
static const char *lp_apm_sel[] = { "osc", };
@@ -86,17 +129,15 @@
static struct clk *clk[IMX5_CLK_END];
static struct clk_onecell_data clk_data;
-static void __init mx5_clocks_common_init(unsigned long rate_ckil,
- unsigned long rate_osc, unsigned long rate_ckih1,
- unsigned long rate_ckih2)
+static void __init mx5_clocks_common_init(void __iomem *ccm_base)
{
- int i;
+ imx5_pm_set_ccm_base(ccm_base);
clk[IMX5_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
- clk[IMX5_CLK_CKIL] = imx_obtain_fixed_clock("ckil", rate_ckil);
- clk[IMX5_CLK_OSC] = imx_obtain_fixed_clock("osc", rate_osc);
- clk[IMX5_CLK_CKIH1] = imx_obtain_fixed_clock("ckih1", rate_ckih1);
- clk[IMX5_CLK_CKIH2] = imx_obtain_fixed_clock("ckih2", rate_ckih2);
+ clk[IMX5_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
+ clk[IMX5_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
+ clk[IMX5_CLK_CKIH1] = imx_obtain_fixed_clock("ckih1", 0);
+ clk[IMX5_CLK_CKIH2] = imx_obtain_fixed_clock("ckih2", 0);
clk[IMX5_CLK_PERIPH_APM] = imx_clk_mux("periph_apm", MXC_CCM_CBCMR, 12, 2,
periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
@@ -244,58 +285,8 @@
clk[IMX5_CLK_SAHARA_IPG_GATE] = imx_clk_gate2("sahara_ipg_gate", "ipg", MXC_CCM_CCGR4, 14);
clk[IMX5_CLK_SATA_REF] = imx_clk_fixed_factor("sata_ref", "usb_phy1_gate", 1, 1);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX5 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
-
- clk_register_clkdev(clk[IMX5_CLK_GPT_HF_GATE], "per", "imx-gpt.0");
- clk_register_clkdev(clk[IMX5_CLK_GPT_IPG_GATE], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[IMX5_CLK_UART1_PER_GATE], "per", "imx21-uart.0");
- clk_register_clkdev(clk[IMX5_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[IMX5_CLK_UART2_PER_GATE], "per", "imx21-uart.1");
- clk_register_clkdev(clk[IMX5_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[IMX5_CLK_UART3_PER_GATE], "per", "imx21-uart.2");
- clk_register_clkdev(clk[IMX5_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[IMX5_CLK_UART4_PER_GATE], "per", "imx21-uart.3");
- clk_register_clkdev(clk[IMX5_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
- clk_register_clkdev(clk[IMX5_CLK_UART5_PER_GATE], "per", "imx21-uart.4");
- clk_register_clkdev(clk[IMX5_CLK_UART5_IPG_GATE], "ipg", "imx21-uart.4");
- clk_register_clkdev(clk[IMX5_CLK_ECSPI1_PER_GATE], "per", "imx51-ecspi.0");
- clk_register_clkdev(clk[IMX5_CLK_ECSPI1_IPG_GATE], "ipg", "imx51-ecspi.0");
- clk_register_clkdev(clk[IMX5_CLK_ECSPI2_PER_GATE], "per", "imx51-ecspi.1");
- clk_register_clkdev(clk[IMX5_CLK_ECSPI2_IPG_GATE], "ipg", "imx51-ecspi.1");
- clk_register_clkdev(clk[IMX5_CLK_CSPI_IPG_GATE], NULL, "imx35-cspi.2");
- clk_register_clkdev(clk[IMX5_CLK_I2C1_GATE], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[IMX5_CLK_I2C2_GATE], NULL, "imx21-i2c.1");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ipg", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ahb", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.1");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ipg", "mxc-ehci.1");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ahb", "mxc-ehci.1");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "imx-udc-mx51");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ipg", "imx-udc-mx51");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ahb", "imx-udc-mx51");
- clk_register_clkdev(clk[IMX5_CLK_NFC_GATE], NULL, "imx51-nand");
- clk_register_clkdev(clk[IMX5_CLK_SSI1_IPG_GATE], NULL, "imx-ssi.0");
- clk_register_clkdev(clk[IMX5_CLK_SSI2_IPG_GATE], NULL, "imx-ssi.1");
- clk_register_clkdev(clk[IMX5_CLK_SSI3_IPG_GATE], NULL, "imx-ssi.2");
- clk_register_clkdev(clk[IMX5_CLK_SDMA_GATE], NULL, "imx35-sdma");
clk_register_clkdev(clk[IMX5_CLK_CPU_PODF], NULL, "cpu0");
- clk_register_clkdev(clk[IMX5_CLK_IIM_GATE], "iim", NULL);
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], NULL, "imx2-wdt.1");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], NULL, "imx-keypad");
- clk_register_clkdev(clk[IMX5_CLK_IPU_DI1_GATE], "di1", "imx-tve.0");
clk_register_clkdev(clk[IMX5_CLK_GPC_DVFS], "gpc_dvfs", NULL);
- clk_register_clkdev(clk[IMX5_CLK_EPIT1_IPG_GATE], "ipg", "imx-epit.0");
- clk_register_clkdev(clk[IMX5_CLK_EPIT1_HF_GATE], "per", "imx-epit.0");
- clk_register_clkdev(clk[IMX5_CLK_EPIT2_IPG_GATE], "ipg", "imx-epit.1");
- clk_register_clkdev(clk[IMX5_CLK_EPIT2_HF_GATE], "per", "imx-epit.1");
/* Set SDHC parents to be PLL2 */
clk_set_parent(clk[IMX5_CLK_ESDHC_A_SEL], clk[IMX5_CLK_PLL2_SW]);
@@ -322,12 +313,26 @@
static void __init mx50_clocks_init(struct device_node *np)
{
+ void __iomem *ccm_base;
+ void __iomem *pll_base;
unsigned long r;
- int i;
- clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
- clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
- clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE);
+ pll_base = ioremap(MX53_DPLL1_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL2_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL3_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base);
+
+ ccm_base = of_iomap(np, 0);
+ WARN_ON(!ccm_base);
+
+ mx5_clocks_common_init(ccm_base);
clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 10, 1,
lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
@@ -349,17 +354,12 @@
clk[IMX5_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3);
clk[IMX5_CLK_CKO2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX50 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- mx5_clocks_common_init(0, 0, 0, 0);
-
/* set SDHC root clock to 200MHZ*/
clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 200000000);
clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 200000000);
@@ -370,21 +370,32 @@
r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
-
- mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx50-gpt"));
}
CLK_OF_DECLARE(imx50_ccm, "fsl,imx50-ccm", mx50_clocks_init);
-int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
- unsigned long rate_ckih1, unsigned long rate_ckih2)
+static void __init mx51_clocks_init(struct device_node *np)
{
- int i;
+ void __iomem *ccm_base;
+ void __iomem *pll_base;
u32 val;
- struct device_node *np;
- clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE);
- clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX51_DPLL2_BASE);
- clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", MX51_DPLL3_BASE);
+ pll_base = ioremap(MX51_DPLL1_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX51_DPLL2_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX51_DPLL3_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base);
+
+ ccm_base = of_iomap(np, 0);
+ WARN_ON(!ccm_base);
+
+ mx5_clocks_common_init(ccm_base);
+
clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1,
lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
clk[IMX5_CLK_IPU_DI0_SEL] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
@@ -417,35 +428,12 @@
mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel));
clk[IMX5_CLK_SPDIF1_GATE] = imx_clk_gate2("spdif1_gate", "spdif1_com_sel", MXC_CCM_CCGR5, 28);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX51 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
- np = of_find_compatible_node(NULL, NULL, "fsl,imx51-ccm");
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
-
- clk_register_clkdev(clk[IMX5_CLK_HSI2C_GATE], NULL, "imx21-i2c.2");
- clk_register_clkdev(clk[IMX5_CLK_MX51_MIPI], "mipi_hsp", NULL);
- clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx27-fec.0");
- clk_register_clkdev(clk[IMX5_CLK_USB_PHY_GATE], "phy", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC1_IPG_GATE], "ipg", "sdhci-esdhc-imx51.0");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx51.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC1_PER_GATE], "per", "sdhci-esdhc-imx51.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC2_IPG_GATE], "ipg", "sdhci-esdhc-imx51.1");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx51.1");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC2_PER_GATE], "per", "sdhci-esdhc-imx51.1");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC3_IPG_GATE], "ipg", "sdhci-esdhc-imx51.2");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx51.2");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC3_PER_GATE], "per", "sdhci-esdhc-imx51.2");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC4_IPG_GATE], "ipg", "sdhci-esdhc-imx51.3");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx51.3");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC4_PER_GATE], "per", "sdhci-esdhc-imx51.3");
-
/* set the usboh3 parent to pll2_sw */
clk_set_parent(clk[IMX5_CLK_USBOH3_SEL], clk[IMX5_CLK_PLL2_SW]);
@@ -453,9 +441,6 @@
clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 166250000);
clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 166250000);
- /* System timer */
- mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT);
-
clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]);
imx_print_silicon_rev("i.MX51", mx51_revision());
clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]);
@@ -474,25 +459,35 @@
val = readl(MXC_CCM_CLPCR);
val |= 1 << 23;
writel(val, MXC_CCM_CLPCR);
-
- return 0;
}
-
-static void __init mx51_clocks_init_dt(struct device_node *np)
-{
- mx51_clocks_init(0, 0, 0, 0);
-}
-CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt);
+CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init);
static void __init mx53_clocks_init(struct device_node *np)
{
- int i;
+ void __iomem *ccm_base;
+ void __iomem *pll_base;
unsigned long r;
- clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
- clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
- clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE);
- clk[IMX5_CLK_PLL4_SW] = imx_clk_pllv2("pll4_sw", "osc", MX53_DPLL4_BASE);
+ pll_base = ioremap(MX53_DPLL1_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL2_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL3_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL4_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL4_SW] = imx_clk_pllv2("pll4_sw", "osc", pll_base);
+
+ ccm_base = of_iomap(np, 0);
+ WARN_ON(!ccm_base);
+
+ mx5_clocks_common_init(ccm_base);
clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 10, 1,
lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
@@ -543,33 +538,12 @@
clk[IMX5_CLK_SPDIF_XTAL_SEL] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2,
mx53_spdif_xtal_sel, ARRAY_SIZE(mx53_spdif_xtal_sel));
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX53 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- mx5_clocks_common_init(0, 0, 0, 0);
-
- clk_register_clkdev(clk[IMX5_CLK_I2C3_GATE], NULL, "imx21-i2c.2");
- clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx25-fec.0");
- clk_register_clkdev(clk[IMX5_CLK_USB_PHY1_GATE], "usb_phy1", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC1_IPG_GATE], "ipg", "sdhci-esdhc-imx53.0");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx53.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC1_PER_GATE], "per", "sdhci-esdhc-imx53.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC2_IPG_GATE], "ipg", "sdhci-esdhc-imx53.1");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx53.1");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC2_PER_GATE], "per", "sdhci-esdhc-imx53.1");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC3_IPG_GATE], "ipg", "sdhci-esdhc-imx53.2");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx53.2");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC3_PER_GATE], "per", "sdhci-esdhc-imx53.2");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC4_IPG_GATE], "ipg", "sdhci-esdhc-imx53.3");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx53.3");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC4_PER_GATE], "per", "sdhci-esdhc-imx53.3");
-
/* set SDHC root clock to 200MHZ*/
clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 200000000);
clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 200000000);
@@ -583,7 +557,5 @@
r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
-
- mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt"));
}
CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 8e795de..6cceb77 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -19,6 +19,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
#include "clk.h"
#include "common.h"
@@ -70,51 +71,16 @@
static const char *lvds_sels[] = {
"dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
- "pcie_ref", "sata_ref",
+ "pcie_ref_125m", "sata_ref_100m",
};
-enum mx6q_clks {
- dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
- pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
- pll2_198m, pll3_120m, pll3_80m, pll3_60m, twd, step, pll1_sw,
- periph_pre, periph2_pre, periph_clk2_sel, periph2_clk2_sel, axi_sel,
- esai_sel, asrc_sel, spdif_sel, gpu2d_axi, gpu3d_axi, gpu2d_core_sel,
- gpu3d_core_sel, gpu3d_shader_sel, ipu1_sel, ipu2_sel, ldb_di0_sel,
- ldb_di1_sel, ipu1_di0_pre_sel, ipu1_di1_pre_sel, ipu2_di0_pre_sel,
- ipu2_di1_pre_sel, ipu1_di0_sel, ipu1_di1_sel, ipu2_di0_sel,
- ipu2_di1_sel, hsi_tx_sel, pcie_axi_sel, ssi1_sel, ssi2_sel, ssi3_sel,
- usdhc1_sel, usdhc2_sel, usdhc3_sel, usdhc4_sel, enfc_sel, emi_sel,
- emi_slow_sel, vdo_axi_sel, vpu_axi_sel, cko1_sel, periph, periph2,
- periph_clk2, periph2_clk2, ipg, ipg_per, esai_pred, esai_podf,
- asrc_pred, asrc_podf, spdif_pred, spdif_podf, can_root, ecspi_root,
- gpu2d_core_podf, gpu3d_core_podf, gpu3d_shader, ipu1_podf, ipu2_podf,
- ldb_di0_podf, ldb_di1_podf, ipu1_di0_pre, ipu1_di1_pre, ipu2_di0_pre,
- ipu2_di1_pre, hsi_tx_podf, ssi1_pred, ssi1_podf, ssi2_pred, ssi2_podf,
- ssi3_pred, ssi3_podf, uart_serial_podf, usdhc1_podf, usdhc2_podf,
- usdhc3_podf, usdhc4_podf, enfc_pred, enfc_podf, emi_podf,
- emi_slow_podf, vpu_axi_podf, cko1_podf, axi, mmdc_ch0_axi_podf,
- mmdc_ch1_axi_podf, arm, ahb, apbh_dma, asrc, can1_ipg, can1_serial,
- can2_ipg, can2_serial, ecspi1, ecspi2, ecspi3, ecspi4, ecspi5, enet,
- esai, gpt_ipg, gpt_ipg_per, gpu2d_core, gpu3d_core, hdmi_iahb,
- hdmi_isfr, i2c1, i2c2, i2c3, iim, enfc, ipu1, ipu1_di0, ipu1_di1, ipu2,
- ipu2_di0, ldb_di0, ldb_di1, ipu2_di1, hsi_tx, mlb, mmdc_ch0_axi,
- mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4, per1_bch,
- gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
- ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
- usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
- pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
- ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
- sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
- usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
- spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div,
- lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, esai_ahb, clk_max
-};
-
-static struct clk *clk[clk_max];
+static struct clk *clk[IMX6QDL_CLK_END];
static struct clk_onecell_data clk_data;
-static enum mx6q_clks const clks_init_on[] __initconst = {
- mmdc_ch0_axi, rom, arm,
+static unsigned int const clks_init_on[] __initconst = {
+ IMX6QDL_CLK_MMDC_CH0_AXI,
+ IMX6QDL_CLK_ROM,
+ IMX6QDL_CLK_ARM,
};
static struct clk_div_table clk_enet_ref_table[] = {
@@ -149,10 +115,10 @@
int i;
int ret;
- clk[dummy] = imx_clk_fixed("dummy", 0);
- clk[ckil] = imx_obtain_fixed_clock("ckil", 0);
- clk[ckih] = imx_obtain_fixed_clock("ckih1", 0);
- clk[osc] = imx_obtain_fixed_clock("osc", 0);
+ clk[IMX6QDL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
+ clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0);
+ clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
base = of_iomap(np, 0);
@@ -166,14 +132,14 @@
video_div_table[2].div = 1;
};
- /* type name parent_name base div_mask */
- clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f);
- clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1);
- clk[pll3_usb_otg] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3);
- clk[pll4_audio] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f);
- clk[pll5_video] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f);
- clk[pll6_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3);
- clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3);
+ /* type name parent_name base div_mask */
+ clk[IMX6QDL_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f);
+ clk[IMX6QDL_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1);
+ clk[IMX6QDL_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3);
+ clk[IMX6QDL_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f);
+ clk[IMX6QDL_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f);
+ clk[IMX6QDL_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3);
+ clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3);
/*
* Bit 20 is the reserved and read-only bit, we do this only for:
@@ -181,28 +147,28 @@
* - Keep refcount when do usbphy clk_enable/disable, in that case,
* the clk framework may need to enable/disable usbphy's parent
*/
- clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
- clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+ clk[IMX6QDL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
+ clk[IMX6QDL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
/*
* usbphy*_gate needs to be on after system boots up, and software
* never needs to control it anymore.
*/
- clk[usbphy1_gate] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
- clk[usbphy2_gate] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
+ clk[IMX6QDL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+ clk[IMX6QDL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
- clk[sata_ref] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
- clk[pcie_ref] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
+ clk[IMX6QDL_CLK_SATA_REF] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
+ clk[IMX6QDL_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
- clk[sata_ref_100m] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20);
- clk[pcie_ref_125m] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
+ clk[IMX6QDL_CLK_SATA_REF_100M] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20);
+ clk[IMX6QDL_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
- clk[enet_ref] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
+ clk[IMX6QDL_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
base + 0xe0, 0, 2, 0, clk_enet_ref_table,
&imx_ccm_lock);
- clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
- clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+ clk[IMX6QDL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+ clk[IMX6QDL_CLK_LVDS2_SEL] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
/*
* lvds1_gate and lvds2_gate are pseudo-gates. Both can be
@@ -210,29 +176,29 @@
* the "output_enable" bit as a gate, even though it's really just
* enabling clock output.
*/
- clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
- clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
+ clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
+ clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
- /* name parent_name reg idx */
- clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
- clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
- clk[pll2_pfd2_396m] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2);
- clk[pll3_pfd0_720m] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0);
- clk[pll3_pfd1_540m] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1);
- clk[pll3_pfd2_508m] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
- clk[pll3_pfd3_454m] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);
+ /* name parent_name reg idx */
+ clk[IMX6QDL_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
+ clk[IMX6QDL_CLK_PLL2_PFD1_594M] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
+ clk[IMX6QDL_CLK_PLL2_PFD2_396M] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2);
+ clk[IMX6QDL_CLK_PLL3_PFD0_720M] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0);
+ clk[IMX6QDL_CLK_PLL3_PFD1_540M] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1);
+ clk[IMX6QDL_CLK_PLL3_PFD2_508M] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
+ clk[IMX6QDL_CLK_PLL3_PFD3_454M] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);
- /* name parent_name mult div */
- clk[pll2_198m] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
- clk[pll3_120m] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
- clk[pll3_80m] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
- clk[pll3_60m] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
- clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2);
+ /* name parent_name mult div */
+ clk[IMX6QDL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
+ clk[IMX6QDL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
+ clk[IMX6QDL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
+ clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
+ clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
- clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
- clk[pll4_audio_div] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
- clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
- clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
+ clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
+ clk[IMX6QDL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clk[IMX6QDL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
np = ccm_node;
base = of_iomap(np, 0);
@@ -240,262 +206,254 @@
imx6q_pm_set_ccm_base(base);
- /* name reg shift width parent_names num_parents */
- clk[step] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
- clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
- clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
- clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
- clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
- clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
- clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels));
- clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clk[spdif_sel] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clk[gpu2d_axi] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
- clk[gpu3d_axi] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
- clk[gpu2d_core_sel] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels));
- clk[gpu3d_core_sel] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels));
- clk[gpu3d_shader_sel] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
- clk[ipu1_sel] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
- clk[ipu2_sel] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
- clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
- clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
- clk[ipu1_di0_pre_sel] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[ipu1_di1_pre_sel] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[ipu2_di0_pre_sel] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[ipu2_di1_pre_sel] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[ipu1_di0_sel] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
- clk[ipu1_di1_sel] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
- clk[ipu2_di0_sel] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
- clk[ipu2_di1_sel] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
- clk[hsi_tx_sel] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels));
- clk[pcie_axi_sel] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
- clk[ssi1_sel] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clk[ssi2_sel] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clk[ssi3_sel] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clk[usdhc1_sel] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[usdhc2_sel] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[usdhc3_sel] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[usdhc4_sel] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[enfc_sel] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
- clk[emi_sel] = imx_clk_fixup_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels), imx_cscmr1_fixup);
- clk[emi_slow_sel] = imx_clk_fixup_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels), imx_cscmr1_fixup);
- clk[vdo_axi_sel] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
- clk[vpu_axi_sel] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
- clk[cko1_sel] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
- clk[cko2_sel] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels));
- clk[cko] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels));
+ /* name reg shift width parent_names num_parents */
+ clk[IMX6QDL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
+ clk[IMX6QDL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
+ clk[IMX6QDL_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clk[IMX6QDL_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clk[IMX6QDL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clk[IMX6QDL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
+ clk[IMX6QDL_CLK_AXI_SEL] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels));
+ clk[IMX6QDL_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[IMX6QDL_CLK_ASRC_SEL] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[IMX6QDL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clk[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels));
+ clk[IMX6QDL_CLK_GPU3D_CORE_SEL] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels));
+ clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
+ clk[IMX6QDL_CLK_IPU1_SEL] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
+ clk[IMX6QDL_CLK_IPU2_SEL] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
+ clk[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI1_PRE_SEL] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI0_SEL] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI1_SEL] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI0_SEL] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI1_SEL] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_HSI_TX_SEL] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels));
+ clk[IMX6QDL_CLK_PCIE_AXI_SEL] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
+ clk[IMX6QDL_CLK_SSI1_SEL] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
+ clk[IMX6QDL_CLK_EMI_SEL] = imx_clk_fixup_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_EMI_SLOW_SEL] = imx_clk_fixup_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_VDO_AXI_SEL] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
+ clk[IMX6QDL_CLK_VPU_AXI_SEL] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
+ clk[IMX6QDL_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
+ clk[IMX6QDL_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels));
+ clk[IMX6QDL_CLK_CKO] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels));
- /* name reg shift width busy: reg, shift parent_names num_parents */
- clk[periph] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
- clk[periph2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
+ /* name reg shift width busy: reg, shift parent_names num_parents */
+ clk[IMX6QDL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
+ clk[IMX6QDL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
- /* name parent_name reg shift width */
- clk[periph_clk2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
- clk[periph2_clk2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
- clk[ipg] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
- clk[ipg_per] = imx_clk_fixup_divider("ipg_per", "ipg", base + 0x1c, 0, 6, imx_cscmr1_fixup);
- clk[esai_pred] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
- clk[esai_podf] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
- clk[asrc_pred] = imx_clk_divider("asrc_pred", "asrc_sel", base + 0x30, 12, 3);
- clk[asrc_podf] = imx_clk_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3);
- clk[spdif_pred] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
- clk[spdif_podf] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
- clk[can_root] = imx_clk_divider("can_root", "pll3_60m", base + 0x20, 2, 6);
- clk[ecspi_root] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6);
- clk[gpu2d_core_podf] = imx_clk_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3);
- clk[gpu3d_core_podf] = imx_clk_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3);
- clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3);
- clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3);
- clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3);
- clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
- clk[ldb_di0_podf] = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0);
- clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
- clk[ldb_di1_podf] = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0);
- clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3);
- clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3);
- clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3);
- clk[ipu2_di1_pre] = imx_clk_divider("ipu2_di1_pre", "ipu2_di1_pre_sel", base + 0x38, 12, 3);
- clk[hsi_tx_podf] = imx_clk_divider("hsi_tx_podf", "hsi_tx_sel", base + 0x30, 29, 3);
- clk[ssi1_pred] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
- clk[ssi1_podf] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
- clk[ssi2_pred] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
- clk[ssi2_podf] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
- clk[ssi3_pred] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
- clk[ssi3_podf] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
- clk[uart_serial_podf] = imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6);
- clk[usdhc1_podf] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
- clk[usdhc2_podf] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
- clk[usdhc3_podf] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
- clk[usdhc4_podf] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
- clk[enfc_pred] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3);
- clk[enfc_podf] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6);
- clk[emi_podf] = imx_clk_fixup_divider("emi_podf", "emi_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup);
- clk[emi_slow_podf] = imx_clk_fixup_divider("emi_slow_podf", "emi_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup);
- clk[vpu_axi_podf] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3);
- clk[cko1_podf] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
- clk[cko2_podf] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
+ /* name parent_name reg shift width */
+ clk[IMX6QDL_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
+ clk[IMX6QDL_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
+ clk[IMX6QDL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
+ clk[IMX6QDL_CLK_IPG_PER] = imx_clk_fixup_divider("ipg_per", "ipg", base + 0x1c, 0, 6, imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
+ clk[IMX6QDL_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
+ clk[IMX6QDL_CLK_ASRC_PRED] = imx_clk_divider("asrc_pred", "asrc_sel", base + 0x30, 12, 3);
+ clk[IMX6QDL_CLK_ASRC_PODF] = imx_clk_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3);
+ clk[IMX6QDL_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
+ clk[IMX6QDL_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
+ clk[IMX6QDL_CLK_CAN_ROOT] = imx_clk_divider("can_root", "pll3_60m", base + 0x20, 2, 6);
+ clk[IMX6QDL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6);
+ clk[IMX6QDL_CLK_GPU2D_CORE_PODF] = imx_clk_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3);
+ clk[IMX6QDL_CLK_GPU3D_CORE_PODF] = imx_clk_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3);
+ clk[IMX6QDL_CLK_GPU3D_SHADER] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3);
+ clk[IMX6QDL_CLK_IPU1_PODF] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3);
+ clk[IMX6QDL_CLK_IPU2_PODF] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3);
+ clk[IMX6QDL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+ clk[IMX6QDL_CLK_LDB_DI0_PODF] = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0);
+ clk[IMX6QDL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+ clk[IMX6QDL_CLK_LDB_DI1_PODF] = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0);
+ clk[IMX6QDL_CLK_IPU1_DI0_PRE] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3);
+ clk[IMX6QDL_CLK_IPU1_DI1_PRE] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3);
+ clk[IMX6QDL_CLK_IPU2_DI0_PRE] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3);
+ clk[IMX6QDL_CLK_IPU2_DI1_PRE] = imx_clk_divider("ipu2_di1_pre", "ipu2_di1_pre_sel", base + 0x38, 12, 3);
+ clk[IMX6QDL_CLK_HSI_TX_PODF] = imx_clk_divider("hsi_tx_podf", "hsi_tx_sel", base + 0x30, 29, 3);
+ clk[IMX6QDL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
+ clk[IMX6QDL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
+ clk[IMX6QDL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
+ clk[IMX6QDL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
+ clk[IMX6QDL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
+ clk[IMX6QDL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
+ clk[IMX6QDL_CLK_UART_SERIAL_PODF] = imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6);
+ clk[IMX6QDL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
+ clk[IMX6QDL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
+ clk[IMX6QDL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
+ clk[IMX6QDL_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
+ clk[IMX6QDL_CLK_ENFC_PRED] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3);
+ clk[IMX6QDL_CLK_ENFC_PODF] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6);
+ clk[IMX6QDL_CLK_EMI_PODF] = imx_clk_fixup_divider("emi_podf", "emi_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_EMI_SLOW_PODF] = imx_clk_fixup_divider("emi_slow_podf", "emi_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_VPU_AXI_PODF] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3);
+ clk[IMX6QDL_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
+ clk[IMX6QDL_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
- /* name parent_name reg shift width busy: reg, shift */
- clk[axi] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0);
- clk[mmdc_ch0_axi_podf] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph", base + 0x14, 19, 3, base + 0x48, 4);
- clk[mmdc_ch1_axi_podf] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
- clk[arm] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
- clk[ahb] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
+ /* name parent_name reg shift width busy: reg, shift */
+ clk[IMX6QDL_CLK_AXI] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0);
+ clk[IMX6QDL_CLK_MMDC_CH0_AXI_PODF] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph", base + 0x14, 19, 3, base + 0x48, 4);
+ clk[IMX6QDL_CLK_MMDC_CH1_AXI_PODF] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
+ clk[IMX6QDL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
+ clk[IMX6QDL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
- /* name parent_name reg shift */
- clk[apbh_dma] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
- clk[asrc] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6);
- clk[can1_ipg] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
- clk[can1_serial] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16);
- clk[can2_ipg] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
- clk[can2_serial] = imx_clk_gate2("can2_serial", "can_root", base + 0x68, 20);
- clk[ecspi1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0);
- clk[ecspi2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
- clk[ecspi3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
- clk[ecspi4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
+ /* name parent_name reg shift */
+ clk[IMX6QDL_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
+ clk[IMX6QDL_CLK_ASRC] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6);
+ clk[IMX6QDL_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
+ clk[IMX6QDL_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16);
+ clk[IMX6QDL_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
+ clk[IMX6QDL_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_root", base + 0x68, 20);
+ clk[IMX6QDL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0);
+ clk[IMX6QDL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
+ clk[IMX6QDL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
+ clk[IMX6QDL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
if (cpu_is_imx6dl())
- /* ecspi5 is replaced with i2c4 on imx6dl & imx6s */
- clk[ecspi5] = imx_clk_gate2("i2c4", "ipg_per", base + 0x6c, 8);
+ clk[IMX6DL_CLK_I2C4] = imx_clk_gate2("i2c4", "ipg_per", base + 0x6c, 8);
else
- clk[ecspi5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8);
- clk[enet] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
- clk[esai] = imx_clk_gate2_shared("esai", "esai_podf", base + 0x6c, 16, &share_count_esai);
- clk[esai_ahb] = imx_clk_gate2_shared("esai_ahb", "ahb", base + 0x6c, 16, &share_count_esai);
- clk[gpt_ipg] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20);
- clk[gpt_ipg_per] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22);
+ clk[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8);
+ clk[IMX6QDL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
+ clk[IMX6QDL_CLK_ESAI] = imx_clk_gate2_shared("esai", "esai_podf", base + 0x6c, 16, &share_count_esai);
+ clk[IMX6QDL_CLK_ESAI_AHB] = imx_clk_gate2_shared("esai_ahb", "ahb", base + 0x6c, 16, &share_count_esai);
+ clk[IMX6QDL_CLK_GPT_IPG] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20);
+ clk[IMX6QDL_CLK_GPT_IPG_PER] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22);
if (cpu_is_imx6dl())
/*
* The multiplexer and divider of imx6q clock gpu3d_shader get
* redefined/reused as gpu2d_core_sel and gpu2d_core_podf on imx6dl.
*/
- clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu3d_shader", base + 0x6c, 24);
+ clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu3d_shader", base + 0x6c, 24);
else
- clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
- clk[gpu3d_core] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26);
- clk[hdmi_iahb] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0);
- clk[hdmi_isfr] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4);
- clk[i2c1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6);
- clk[i2c2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8);
- clk[i2c3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10);
- clk[iim] = imx_clk_gate2("iim", "ipg", base + 0x70, 12);
- clk[enfc] = imx_clk_gate2("enfc", "enfc_podf", base + 0x70, 14);
- clk[vdoa] = imx_clk_gate2("vdoa", "vdo_axi", base + 0x70, 26);
- clk[ipu1] = imx_clk_gate2("ipu1", "ipu1_podf", base + 0x74, 0);
- clk[ipu1_di0] = imx_clk_gate2("ipu1_di0", "ipu1_di0_sel", base + 0x74, 2);
- clk[ipu1_di1] = imx_clk_gate2("ipu1_di1", "ipu1_di1_sel", base + 0x74, 4);
- clk[ipu2] = imx_clk_gate2("ipu2", "ipu2_podf", base + 0x74, 6);
- clk[ipu2_di0] = imx_clk_gate2("ipu2_di0", "ipu2_di0_sel", base + 0x74, 8);
- clk[ldb_di0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12);
- clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
- clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
- clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
+ clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
+ clk[IMX6QDL_CLK_GPU3D_CORE] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26);
+ clk[IMX6QDL_CLK_HDMI_IAHB] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0);
+ clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4);
+ clk[IMX6QDL_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6);
+ clk[IMX6QDL_CLK_I2C2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8);
+ clk[IMX6QDL_CLK_I2C3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10);
+ clk[IMX6QDL_CLK_IIM] = imx_clk_gate2("iim", "ipg", base + 0x70, 12);
+ clk[IMX6QDL_CLK_ENFC] = imx_clk_gate2("enfc", "enfc_podf", base + 0x70, 14);
+ clk[IMX6QDL_CLK_VDOA] = imx_clk_gate2("vdoa", "vdo_axi", base + 0x70, 26);
+ clk[IMX6QDL_CLK_IPU1] = imx_clk_gate2("ipu1", "ipu1_podf", base + 0x74, 0);
+ clk[IMX6QDL_CLK_IPU1_DI0] = imx_clk_gate2("ipu1_di0", "ipu1_di0_sel", base + 0x74, 2);
+ clk[IMX6QDL_CLK_IPU1_DI1] = imx_clk_gate2("ipu1_di1", "ipu1_di1_sel", base + 0x74, 4);
+ clk[IMX6QDL_CLK_IPU2] = imx_clk_gate2("ipu2", "ipu2_podf", base + 0x74, 6);
+ clk[IMX6QDL_CLK_IPU2_DI0] = imx_clk_gate2("ipu2_di0", "ipu2_di0_sel", base + 0x74, 8);
+ clk[IMX6QDL_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12);
+ clk[IMX6QDL_CLK_LDB_DI1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
+ clk[IMX6QDL_CLK_IPU2_DI1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
+ clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
if (cpu_is_imx6dl())
/*
* The multiplexer and divider of the imx6q clock gpu2d get
* redefined/reused as mlb_sys_sel and mlb_sys_clk_podf on imx6dl.
*/
- clk[mlb] = imx_clk_gate2("mlb", "gpu2d_core_podf", base + 0x74, 18);
+ clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb", "gpu2d_core_podf", base + 0x74, 18);
else
- clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18);
- clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
- clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
- clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
- clk[openvg_axi] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30);
- clk[pcie_axi] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0);
- clk[per1_bch] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
- clk[pwm1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16);
- clk[pwm2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18);
- clk[pwm3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20);
- clk[pwm4] = imx_clk_gate2("pwm4", "ipg_per", base + 0x78, 22);
- clk[gpmi_bch_apb] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24);
- clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
- clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
- clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
- clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
- clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
- clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
- clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
- clk[spdif] = imx_clk_gate2("spdif", "spdif_podf", base + 0x7c, 14);
- clk[ssi1_ipg] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18);
- clk[ssi2_ipg] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20);
- clk[ssi3_ipg] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22);
- clk[uart_ipg] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
- clk[uart_serial] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26);
- clk[usboh3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
- clk[usdhc1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
- clk[usdhc2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
- clk[usdhc3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
- clk[usdhc4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
- clk[eim_slow] = imx_clk_gate2("eim_slow", "emi_slow_podf", base + 0x80, 10);
- clk[vdo_axi] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12);
- clk[vpu_axi] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14);
- clk[cko1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
- clk[cko2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24);
+ clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb", "axi", base + 0x74, 18);
+ clk[IMX6QDL_CLK_MMDC_CH0_AXI] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
+ clk[IMX6QDL_CLK_MMDC_CH1_AXI] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
+ clk[IMX6QDL_CLK_OCRAM] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
+ clk[IMX6QDL_CLK_OPENVG_AXI] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30);
+ clk[IMX6QDL_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0);
+ clk[IMX6QDL_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
+ clk[IMX6QDL_CLK_PWM1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16);
+ clk[IMX6QDL_CLK_PWM2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18);
+ clk[IMX6QDL_CLK_PWM3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20);
+ clk[IMX6QDL_CLK_PWM4] = imx_clk_gate2("pwm4", "ipg_per", base + 0x78, 22);
+ clk[IMX6QDL_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24);
+ clk[IMX6QDL_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
+ clk[IMX6QDL_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
+ clk[IMX6QDL_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
+ clk[IMX6QDL_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
+ clk[IMX6QDL_CLK_SATA] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
+ clk[IMX6QDL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
+ clk[IMX6QDL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
+ clk[IMX6QDL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif_podf", base + 0x7c, 14);
+ clk[IMX6QDL_CLK_SSI1_IPG] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18);
+ clk[IMX6QDL_CLK_SSI2_IPG] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20);
+ clk[IMX6QDL_CLK_SSI3_IPG] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22);
+ clk[IMX6QDL_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
+ clk[IMX6QDL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26);
+ clk[IMX6QDL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
+ clk[IMX6QDL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
+ clk[IMX6QDL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
+ clk[IMX6QDL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
+ clk[IMX6QDL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
+ clk[IMX6QDL_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "emi_slow_podf", base + 0x80, 10);
+ clk[IMX6QDL_CLK_VDO_AXI] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12);
+ clk[IMX6QDL_CLK_VPU_AXI] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14);
+ clk[IMX6QDL_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
+ clk[IMX6QDL_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX6q clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
- clk_register_clkdev(clk[enet_ref], "enet_ref", NULL);
+ clk_register_clkdev(clk[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL);
if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
cpu_is_imx6dl()) {
- clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
- clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
+ clk_set_parent(clk[IMX6QDL_CLK_LDB_DI0_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_LDB_DI1_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
}
- clk_set_parent(clk[ipu1_di0_pre_sel], clk[pll5_video_div]);
- clk_set_parent(clk[ipu1_di1_pre_sel], clk[pll5_video_div]);
- clk_set_parent(clk[ipu2_di0_pre_sel], clk[pll5_video_div]);
- clk_set_parent(clk[ipu2_di1_pre_sel], clk[pll5_video_div]);
- clk_set_parent(clk[ipu1_di0_sel], clk[ipu1_di0_pre]);
- clk_set_parent(clk[ipu1_di1_sel], clk[ipu1_di1_pre]);
- clk_set_parent(clk[ipu2_di0_sel], clk[ipu2_di0_pre]);
- clk_set_parent(clk[ipu2_di1_sel], clk[ipu2_di1_pre]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI1_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI0_SEL], clk[IMX6QDL_CLK_IPU1_DI0_PRE]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI1_SEL], clk[IMX6QDL_CLK_IPU1_DI1_PRE]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI0_SEL], clk[IMX6QDL_CLK_IPU2_DI0_PRE]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI1_SEL], clk[IMX6QDL_CLK_IPU2_DI1_PRE]);
/*
* The gpmi needs 100MHz frequency in the EDO/Sync mode,
* We can not get the 100MHz from the pll2_pfd0_352m.
* So choose pll2_pfd2_396m as enfc_sel's parent.
*/
- clk_set_parent(clk[enfc_sel], clk[pll2_pfd2_396m]);
+ clk_set_parent(clk[IMX6QDL_CLK_ENFC_SEL], clk[IMX6QDL_CLK_PLL2_PFD2_396M]);
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clk[clks_init_on[i]]);
if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
- clk_prepare_enable(clk[usbphy1_gate]);
- clk_prepare_enable(clk[usbphy2_gate]);
+ clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY1_GATE]);
+ clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY2_GATE]);
}
/*
* Let's initially set up CLKO with OSC24M, since this configuration
* is widely used by imx6q board designs to clock audio codec.
*/
- ret = clk_set_parent(clk[cko2_sel], clk[osc]);
+ ret = clk_set_parent(clk[IMX6QDL_CLK_CKO2_SEL], clk[IMX6QDL_CLK_OSC]);
if (!ret)
- ret = clk_set_parent(clk[cko], clk[cko2]);
+ ret = clk_set_parent(clk[IMX6QDL_CLK_CKO], clk[IMX6QDL_CLK_CKO2]);
if (ret)
pr_warn("failed to set up CLKO: %d\n", ret);
/* Audio-related clocks configuration */
- clk_set_parent(clk[spdif_sel], clk[pll3_pfd3_454m]);
+ clk_set_parent(clk[IMX6QDL_CLK_SPDIF_SEL], clk[IMX6QDL_CLK_PLL3_PFD3_454M]);
/* All existing boards with PCIe use LVDS1 */
if (IS_ENABLED(CONFIG_PCI_IMX6))
- clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
+ clk_set_parent(clk[IMX6QDL_CLK_LVDS1_SEL], clk[IMX6QDL_CLK_SATA_REF_100M]);
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
-
- mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"));
}
CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index 5408ca7..fef46fa 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -348,18 +348,12 @@
clks[IMX6SL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
clks[IMX6SL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- if (IS_ERR(clks[i]))
- pr_err("i.MX6SL clk %d: register failed with %ld\n",
- i, PTR_ERR(clks[i]));
+ imx_check_clocks(clks, ARRAY_SIZE(clks));
clk_data.clks = clks;
clk_data.clk_num = ARRAY_SIZE(clks);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- clk_register_clkdev(clks[IMX6SL_CLK_GPT], "ipg", "imx-gpt.0");
- clk_register_clkdev(clks[IMX6SL_CLK_GPT_SERIAL], "per", "imx-gpt.0");
-
/* Ensure the AHB clk is at 132MHz. */
ret = clk_set_rate(clks[IMX6SL_CLK_AHB], 132000000);
if (ret)
@@ -383,8 +377,5 @@
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt");
- mxc_timer_init_dt(np);
}
CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c
index 72f8902..ecde72b 100644
--- a/arch/arm/mach-imx/clk-imx6sx.c
+++ b/arch/arm/mach-imx/clk-imx6sx.c
@@ -124,6 +124,9 @@
static u32 share_count_asrc;
static u32 share_count_audio;
static u32 share_count_esai;
+static u32 share_count_ssi1;
+static u32 share_count_ssi2;
+static u32 share_count_ssi3;
static void __init imx6sx_clocks_init(struct device_node *ccm_node)
{
@@ -409,12 +412,12 @@
clks[IMX6SX_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
clks[IMX6SX_CLK_AUDIO] = imx_clk_gate2_shared("audio", "audio_podf", base + 0x7c, 14, &share_count_audio);
clks[IMX6SX_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio);
- clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18);
- clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20);
- clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22);
- clks[IMX6SX_CLK_SSI1] = imx_clk_gate2("ssi1", "ssi1_podf", base + 0x7c, 18);
- clks[IMX6SX_CLK_SSI2] = imx_clk_gate2("ssi2", "ssi2_podf", base + 0x7c, 20);
- clks[IMX6SX_CLK_SSI3] = imx_clk_gate2("ssi3", "ssi3_podf", base + 0x7c, 22);
+ clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
+ clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
+ clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
+ clks[IMX6SX_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1);
+ clks[IMX6SX_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2);
+ clks[IMX6SX_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3);
clks[IMX6SX_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
clks[IMX6SX_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_podf", base + 0x7c, 26);
clks[IMX6SX_CLK_SAI1_IPG] = imx_clk_gate2("sai1_ipg", "ipg", base + 0x7c, 28);
@@ -443,17 +446,12 @@
/* mask handshake of mmdc */
writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- if (IS_ERR(clks[i]))
- pr_err("i.MX6sx clk %d: register failed with %ld\n", i, PTR_ERR(clks[i]));
+ imx_check_clocks(clks, ARRAY_SIZE(clks));
clk_data.clks = clks;
clk_data.clk_num = ARRAY_SIZE(clks);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- clk_register_clkdev(clks[IMX6SX_CLK_GPT_BUS], "ipg", "imx-gpt.0");
- clk_register_clkdev(clks[IMX6SX_CLK_GPT_SERIAL], "per", "imx-gpt.0");
-
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
@@ -517,8 +515,5 @@
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-gpt");
- mxc_timer_init_dt(np);
}
CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init);
diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c
index 22dc3ee..f60d6d5 100644
--- a/arch/arm/mach-imx/clk-vf610.c
+++ b/arch/arm/mach-imx/clk-vf610.c
@@ -295,14 +295,18 @@
clk[VF610_CLK_ASRC] = imx_clk_gate2("asrc", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(1));
- clk[VF610_CLK_FLEXCAN0] = imx_clk_gate2("flexcan0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(0));
- clk[VF610_CLK_FLEXCAN1] = imx_clk_gate2("flexcan1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(4));
+ clk[VF610_CLK_FLEXCAN0_EN] = imx_clk_gate("flexcan0_en", "ipg_bus", CCM_CSCDR2, 11);
+ clk[VF610_CLK_FLEXCAN0] = imx_clk_gate2("flexcan0", "flexcan0_en", CCM_CCGR0, CCM_CCGRx_CGn(0));
+ clk[VF610_CLK_FLEXCAN1_EN] = imx_clk_gate("flexcan1_en", "ipg_bus", CCM_CSCDR2, 12);
+ clk[VF610_CLK_FLEXCAN1] = imx_clk_gate2("flexcan1", "flexcan1_en", CCM_CCGR9, CCM_CCGRx_CGn(4));
clk[VF610_CLK_DMAMUX0] = imx_clk_gate2("dmamux0", "platform_bus", CCM_CCGR0, CCM_CCGRx_CGn(4));
clk[VF610_CLK_DMAMUX1] = imx_clk_gate2("dmamux1", "platform_bus", CCM_CCGR0, CCM_CCGRx_CGn(5));
clk[VF610_CLK_DMAMUX2] = imx_clk_gate2("dmamux2", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(1));
clk[VF610_CLK_DMAMUX3] = imx_clk_gate2("dmamux3", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(2));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+
clk_set_parent(clk[VF610_CLK_QSPI0_SEL], clk[VF610_CLK_PLL1_PFD4]);
clk_set_rate(clk[VF610_CLK_QSPI0_X4_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_SEL]) / 2);
clk_set_rate(clk[VF610_CLK_QSPI0_X2_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_X4_DIV]) / 2);
diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c
index edc35df..df12b53 100644
--- a/arch/arm/mach-imx/clk.c
+++ b/arch/arm/mach-imx/clk.c
@@ -7,6 +7,16 @@
DEFINE_SPINLOCK(imx_ccm_lock);
+void __init imx_check_clocks(struct clk *clks[], unsigned int count)
+{
+ unsigned i;
+
+ for (i = 0; i < count; i++)
+ if (IS_ERR(clks[i]))
+ pr_err("i.MX clk %u: register failed with %ld\n",
+ i, PTR_ERR(clks[i]));
+}
+
static struct clk * __init imx_obtain_fixed_clock_from_dt(const char *name)
{
struct of_phandle_args phandle;
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index e29f6eb..d5ba76f 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -6,6 +6,8 @@
extern spinlock_t imx_ccm_lock;
+void imx_check_clocks(struct clk *clks[], unsigned int count);
+
extern void imx_cscmr1_fixup(u32 *val);
struct clk *imx_clk_pllv1(const char *name, const char *parent,
@@ -95,6 +97,13 @@
shift, 0, &imx_ccm_lock);
}
+static inline struct clk *imx_clk_gate_dis(const char *name, const char *parent,
+ void __iomem *reg, u8 shift)
+{
+ return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, CLK_GATE_SET_TO_DISABLE, &imx_ccm_lock);
+}
+
static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
u8 shift, u8 width, const char **parents, int num_parents)
{
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 9ab785c..22ba897 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -19,6 +19,7 @@
struct clk;
struct device_node;
enum mxc_cpu_pwr_mode;
+struct of_device_id;
void mx1_map_io(void);
void mx21_map_io(void);
@@ -26,48 +27,34 @@
void mx27_map_io(void);
void mx31_map_io(void);
void mx35_map_io(void);
-void mx51_map_io(void);
-void mx53_map_io(void);
void imx1_init_early(void);
void imx21_init_early(void);
void imx25_init_early(void);
void imx27_init_early(void);
void imx31_init_early(void);
void imx35_init_early(void);
-void imx51_init_early(void);
-void imx53_init_early(void);
void mxc_init_irq(void __iomem *);
-void tzic_init_irq(void __iomem *);
+void tzic_init_irq(void);
void mx1_init_irq(void);
void mx21_init_irq(void);
void mx25_init_irq(void);
void mx27_init_irq(void);
void mx31_init_irq(void);
void mx35_init_irq(void);
-void mx51_init_irq(void);
-void mx53_init_irq(void);
void imx1_soc_init(void);
void imx21_soc_init(void);
void imx25_soc_init(void);
void imx27_soc_init(void);
void imx31_soc_init(void);
void imx35_soc_init(void);
-void imx51_soc_init(void);
-void imx51_init_late(void);
-void imx53_init_late(void);
void epit_timer_init(void __iomem *base, int irq);
void mxc_timer_init(void __iomem *, int);
-void mxc_timer_init_dt(struct device_node *);
int mx1_clocks_init(unsigned long fref);
int mx21_clocks_init(unsigned long lref, unsigned long fref);
int mx25_clocks_init(void);
int mx27_clocks_init(unsigned long fref);
int mx31_clocks_init(unsigned long fref);
int mx35_clocks_init(void);
-int mx51_clocks_init(unsigned long ckil, unsigned long osc,
- unsigned long ckih1, unsigned long ckih2);
-int mx25_clocks_init_dt(void);
-int mx27_clocks_init_dt(void);
int mx31_clocks_init_dt(void);
struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
@@ -75,8 +62,10 @@
void mxc_restart(enum reboot_mode, const char *);
void mxc_arch_reset_init(void __iomem *);
void mxc_arch_reset_init_dt(void);
+int mx51_revision(void);
int mx53_revision(void);
void imx_set_aips(void __iomem *);
+void imx_aips_allow_unprivileged_access(const char *compat);
int mxc_device_init(void);
void imx_set_soc_revision(unsigned int rev);
unsigned int imx_get_soc_revision(void);
@@ -117,7 +106,7 @@
#endif
void imx_src_init(void);
void imx_gpc_init(void);
-void imx_gpc_pre_suspend(void);
+void imx_gpc_pre_suspend(bool arm_power_off);
void imx_gpc_post_resume(void);
void imx_gpc_mask_all(void);
void imx_gpc_restore_all(void);
@@ -127,7 +116,7 @@
void imx_anatop_pre_suspend(void);
void imx_anatop_post_resume(void);
int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-void imx6q_set_int_mem_clk_lpm(void);
+void imx6q_set_int_mem_clk_lpm(bool enable);
void imx6sl_set_wait_clk(bool enter);
void imx_cpu_die(unsigned int cpu);
@@ -144,12 +133,17 @@
void imx6q_pm_init(void);
void imx6dl_pm_init(void);
void imx6sl_pm_init(void);
+void imx6sx_pm_init(void);
void imx6q_pm_set_ccm_base(void __iomem *base);
#ifdef CONFIG_PM
-void imx5_pm_init(void);
+void imx51_pm_init(void);
+void imx53_pm_init(void);
+void imx5_pm_set_ccm_base(void __iomem *base);
#else
-static inline void imx5_pm_init(void) {}
+static inline void imx51_pm_init(void) {}
+static inline void imx53_pm_init(void) {}
+static inline void imx5_pm_set_ccm_base(void __iomem *base) {}
#endif
#ifdef CONFIG_NEON
diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c
index c1c99a7..3403bac 100644
--- a/arch/arm/mach-imx/cpu-imx5.c
+++ b/arch/arm/mach-imx/cpu-imx5.c
@@ -16,6 +16,8 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include "hardware.h"
#include "common.h"
@@ -24,10 +26,26 @@
#define IIM_SREV 0x24
+static u32 imx5_read_srev_reg(const char *compat)
+{
+ void __iomem *iim_base;
+ struct device_node *np;
+ u32 srev;
+
+ np = of_find_compatible_node(NULL, NULL, compat);
+ iim_base = of_iomap(np, 0);
+ WARN_ON(!iim_base);
+
+ srev = readl(iim_base + IIM_SREV) & 0xff;
+
+ iounmap(iim_base);
+
+ return srev;
+}
+
static int get_mx51_srev(void)
{
- void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR);
- u32 rev = readl(iim_base + IIM_SREV) & 0xff;
+ u32 rev = imx5_read_srev_reg("fsl,imx51-iim");
switch (rev) {
case 0x0:
@@ -77,8 +95,7 @@
static int get_mx53_srev(void)
{
- void __iomem *iim_base = MX51_IO_ADDRESS(MX53_IIM_BASE_ADDR);
- u32 rev = readl(iim_base + IIM_SREV) & 0xff;
+ u32 rev = imx5_read_srev_reg("fsl,imx53-iim");
switch (rev) {
case 0x0:
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index bbe8ff1..df42c14 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -2,6 +2,7 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/sys_soc.h>
@@ -60,6 +61,18 @@
__raw_writel(reg, base + 0x50);
}
+void __init imx_aips_allow_unprivileged_access(
+ const char *compat)
+{
+ void __iomem *aips_base_addr;
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, compat) {
+ aips_base_addr = of_iomap(np, 0);
+ imx_set_aips(aips_base_addr);
+ }
+}
+
struct device * __init imx_soc_device_init(void)
{
struct soc_device_attribute *soc_dev_attr;
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index 6bcae04..10844d3 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -13,6 +13,7 @@
#include "common.h"
#include "cpuidle.h"
+#include "hardware.h"
static atomic_t master = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(master_lock);
@@ -66,10 +67,11 @@
int __init imx6q_cpuidle_init(void)
{
/* Need to enable SCU standby for entering WAIT modes */
- imx_scu_standby_enable();
+ if (!cpu_is_imx6sx())
+ imx_scu_standby_enable();
/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
- imx6q_set_int_mem_clk_lpm();
+ imx6q_set_int_mem_clk_lpm(true);
return cpuidle_register(&imx6q_cpuidle_driver, NULL);
}
diff --git a/arch/arm/mach-imx/crm-regs-imx5.h b/arch/arm/mach-imx/crm-regs-imx5.h
deleted file mode 100644
index 5e3f1f0..0000000
--- a/arch/arm/mach-imx/crm-regs-imx5.h
+++ /dev/null
@@ -1,600 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__
-
-#define MX51_CCM_BASE MX51_IO_ADDRESS(MX51_CCM_BASE_ADDR)
-#define MX51_DPLL1_BASE MX51_IO_ADDRESS(MX51_PLL1_BASE_ADDR)
-#define MX51_DPLL2_BASE MX51_IO_ADDRESS(MX51_PLL2_BASE_ADDR)
-#define MX51_DPLL3_BASE MX51_IO_ADDRESS(MX51_PLL3_BASE_ADDR)
-#define MX51_CORTEXA8_BASE MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR)
-#define MX51_GPC_BASE MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR)
-
-/*MX53*/
-#define MX53_CCM_BASE MX53_IO_ADDRESS(MX53_CCM_BASE_ADDR)
-#define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
-#define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
-#define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
-
-/* PLL Register Offsets */
-#define MXC_PLL_DP_CTL 0x00
-#define MXC_PLL_DP_CONFIG 0x04
-#define MXC_PLL_DP_OP 0x08
-#define MXC_PLL_DP_MFD 0x0C
-#define MXC_PLL_DP_MFN 0x10
-#define MXC_PLL_DP_MFNMINUS 0x14
-#define MXC_PLL_DP_MFNPLUS 0x18
-#define MXC_PLL_DP_HFS_OP 0x1C
-#define MXC_PLL_DP_HFS_MFD 0x20
-#define MXC_PLL_DP_HFS_MFN 0x24
-#define MXC_PLL_DP_MFN_TOGC 0x28
-#define MXC_PLL_DP_DESTAT 0x2c
-
-/* PLL Register Bit definitions */
-#define MXC_PLL_DP_CTL_MUL_CTRL 0x2000
-#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000
-#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET 12
-#define MXC_PLL_DP_CTL_ADE 0x800
-#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400
-#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8)
-#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET 8
-#define MXC_PLL_DP_CTL_HFSM 0x80
-#define MXC_PLL_DP_CTL_PRE 0x40
-#define MXC_PLL_DP_CTL_UPEN 0x20
-#define MXC_PLL_DP_CTL_RST 0x10
-#define MXC_PLL_DP_CTL_RCP 0x8
-#define MXC_PLL_DP_CTL_PLM 0x4
-#define MXC_PLL_DP_CTL_BRM0 0x2
-#define MXC_PLL_DP_CTL_LRF 0x1
-
-#define MXC_PLL_DP_CONFIG_BIST 0x8
-#define MXC_PLL_DP_CONFIG_SJC_CE 0x4
-#define MXC_PLL_DP_CONFIG_AREN 0x2
-#define MXC_PLL_DP_CONFIG_LDREQ 0x1
-
-#define MXC_PLL_DP_OP_MFI_OFFSET 4
-#define MXC_PLL_DP_OP_MFI_MASK (0xF << 4)
-#define MXC_PLL_DP_OP_PDF_OFFSET 0
-#define MXC_PLL_DP_OP_PDF_MASK 0xF
-
-#define MXC_PLL_DP_MFD_OFFSET 0
-#define MXC_PLL_DP_MFD_MASK 0x07FFFFFF
-
-#define MXC_PLL_DP_MFN_OFFSET 0x0
-#define MXC_PLL_DP_MFN_MASK 0x07FFFFFF
-
-#define MXC_PLL_DP_MFN_TOGC_TOG_DIS (1 << 17)
-#define MXC_PLL_DP_MFN_TOGC_TOG_EN (1 << 16)
-#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET 0x0
-#define MXC_PLL_DP_MFN_TOGC_CNT_MASK 0xFFFF
-
-#define MXC_PLL_DP_DESTAT_TOG_SEL (1 << 31)
-#define MXC_PLL_DP_DESTAT_MFN 0x07FFFFFF
-
-/* Register addresses of CCM*/
-#define MXC_CCM_CCR (MX51_CCM_BASE + 0x00)
-#define MXC_CCM_CCDR (MX51_CCM_BASE + 0x04)
-#define MXC_CCM_CSR (MX51_CCM_BASE + 0x08)
-#define MXC_CCM_CCSR (MX51_CCM_BASE + 0x0C)
-#define MXC_CCM_CACRR (MX51_CCM_BASE + 0x10)
-#define MXC_CCM_CBCDR (MX51_CCM_BASE + 0x14)
-#define MXC_CCM_CBCMR (MX51_CCM_BASE + 0x18)
-#define MXC_CCM_CSCMR1 (MX51_CCM_BASE + 0x1C)
-#define MXC_CCM_CSCMR2 (MX51_CCM_BASE + 0x20)
-#define MXC_CCM_CSCDR1 (MX51_CCM_BASE + 0x24)
-#define MXC_CCM_CS1CDR (MX51_CCM_BASE + 0x28)
-#define MXC_CCM_CS2CDR (MX51_CCM_BASE + 0x2C)
-#define MXC_CCM_CDCDR (MX51_CCM_BASE + 0x30)
-#define MXC_CCM_CHSCDR (MX51_CCM_BASE + 0x34)
-#define MXC_CCM_CSCDR2 (MX51_CCM_BASE + 0x38)
-#define MXC_CCM_CSCDR3 (MX51_CCM_BASE + 0x3C)
-#define MXC_CCM_CSCDR4 (MX51_CCM_BASE + 0x40)
-#define MXC_CCM_CWDR (MX51_CCM_BASE + 0x44)
-#define MXC_CCM_CDHIPR (MX51_CCM_BASE + 0x48)
-#define MXC_CCM_CDCR (MX51_CCM_BASE + 0x4C)
-#define MXC_CCM_CTOR (MX51_CCM_BASE + 0x50)
-#define MXC_CCM_CLPCR (MX51_CCM_BASE + 0x54)
-#define MXC_CCM_CISR (MX51_CCM_BASE + 0x58)
-#define MXC_CCM_CIMR (MX51_CCM_BASE + 0x5C)
-#define MXC_CCM_CCOSR (MX51_CCM_BASE + 0x60)
-#define MXC_CCM_CGPR (MX51_CCM_BASE + 0x64)
-#define MXC_CCM_CCGR0 (MX51_CCM_BASE + 0x68)
-#define MXC_CCM_CCGR1 (MX51_CCM_BASE + 0x6C)
-#define MXC_CCM_CCGR2 (MX51_CCM_BASE + 0x70)
-#define MXC_CCM_CCGR3 (MX51_CCM_BASE + 0x74)
-#define MXC_CCM_CCGR4 (MX51_CCM_BASE + 0x78)
-#define MXC_CCM_CCGR5 (MX51_CCM_BASE + 0x7C)
-#define MXC_CCM_CCGR6 (MX51_CCM_BASE + 0x80)
-#define MXC_CCM_CCGR7 (MX51_CCM_BASE + 0x84)
-
-#define MXC_CCM_CMEOR (MX51_CCM_BASE + 0x84)
-
-/* Define the bits in register CCR */
-#define MXC_CCM_CCR_COSC_EN (1 << 12)
-#define MXC_CCM_CCR_FPM_MULT_MASK (1 << 11)
-#define MXC_CCM_CCR_CAMP2_EN (1 << 10)
-#define MXC_CCM_CCR_CAMP1_EN (1 << 9)
-#define MXC_CCM_CCR_FPM_EN (1 << 8)
-#define MXC_CCM_CCR_OSCNT_OFFSET (0)
-#define MXC_CCM_CCR_OSCNT_MASK (0xFF)
-
-/* Define the bits in register CCDR */
-#define MXC_CCM_CCDR_HSC_HS_MASK (0x1 << 18)
-#define MXC_CCM_CCDR_IPU_HS_MASK (0x1 << 17)
-#define MXC_CCM_CCDR_EMI_HS_MASK (0x1 << 16)
-
-/* Define the bits in register CSR */
-#define MXC_CCM_CSR_COSR_READY (1 << 5)
-#define MXC_CCM_CSR_LVS_VALUE (1 << 4)
-#define MXC_CCM_CSR_CAMP2_READY (1 << 3)
-#define MXC_CCM_CSR_CAMP1_READY (1 << 2)
-#define MXC_CCM_CSR_FPM_READY (1 << 1)
-#define MXC_CCM_CSR_REF_EN_B (1 << 0)
-
-/* Define the bits in register CCSR */
-#define MXC_CCM_CCSR_LP_APM_SEL (0x1 << 9)
-#define MXC_CCM_CCSR_STEP_SEL_OFFSET (7)
-#define MXC_CCM_CCSR_STEP_SEL_MASK (0x3 << 7)
-#define MXC_CCM_CCSR_STEP_SEL_LP_APM 0
-#define MXC_CCM_CCSR_STEP_SEL_PLL1_BYPASS 1 /* Only when JTAG connected? */
-#define MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED 2
-#define MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED 3
-#define MXC_CCM_CCSR_PLL2_PODF_OFFSET (5)
-#define MXC_CCM_CCSR_PLL2_PODF_MASK (0x3 << 5)
-#define MXC_CCM_CCSR_PLL3_PODF_OFFSET (3)
-#define MXC_CCM_CCSR_PLL3_PODF_MASK (0x3 << 3)
-#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL (1 << 2) /* 0: pll1_main_clk,
- 1: step_clk */
-#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL (1 << 1)
-#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL (1 << 0)
-
-/* Define the bits in register CACRR */
-#define MXC_CCM_CACRR_ARM_PODF_OFFSET (0)
-#define MXC_CCM_CACRR_ARM_PODF_MASK (0x7)
-
-/* Define the bits in register CBCDR */
-#define MXC_CCM_CBCDR_EMI_CLK_SEL (0x1 << 26)
-#define MXC_CCM_CBCDR_PERIPH_CLK_SEL (0x1 << 25)
-#define MXC_CCM_CBCDR_DDR_HF_SEL_OFFSET (30)
-#define MXC_CCM_CBCDR_DDR_HF_SEL (0x1 << 30)
-#define MXC_CCM_CBCDR_DDR_PODF_OFFSET (27)
-#define MXC_CCM_CBCDR_DDR_PODF_MASK (0x7 << 27)
-#define MXC_CCM_CBCDR_EMI_PODF_OFFSET (22)
-#define MXC_CCM_CBCDR_EMI_PODF_MASK (0x7 << 22)
-#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET (19)
-#define MXC_CCM_CBCDR_AXI_B_PODF_MASK (0x7 << 19)
-#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET (16)
-#define MXC_CCM_CBCDR_AXI_A_PODF_MASK (0x7 << 16)
-#define MXC_CCM_CBCDR_NFC_PODF_OFFSET (13)
-#define MXC_CCM_CBCDR_NFC_PODF_MASK (0x7 << 13)
-#define MXC_CCM_CBCDR_AHB_PODF_OFFSET (10)
-#define MXC_CCM_CBCDR_AHB_PODF_MASK (0x7 << 10)
-#define MXC_CCM_CBCDR_IPG_PODF_OFFSET (8)
-#define MXC_CCM_CBCDR_IPG_PODF_MASK (0x3 << 8)
-#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET (6)
-#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK (0x3 << 6)
-#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET (3)
-#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK (0x7 << 3)
-#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET (0)
-#define MXC_CCM_CBCDR_PERCLK_PODF_MASK (0x7)
-
-/* Define the bits in register CBCMR */
-#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET (14)
-#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK (0x3 << 14)
-#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET (12)
-#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK (0x3 << 12)
-#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET (10)
-#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK (0x3 << 10)
-#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET (8)
-#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK (0x3 << 8)
-#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET (6)
-#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK (0x3 << 6)
-#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET (4)
-#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK (0x3 << 4)
-#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET (14)
-#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK (0x3 << 14)
-#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL (0x1 << 1)
-#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL (0x1 << 0)
-
-/* Define the bits in register CSCMR1 */
-#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET (30)
-#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK (0x3 << 30)
-#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET (28)
-#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK (0x3 << 28)
-#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET (26)
-#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL (0x1 << 26)
-#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET (24)
-#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK (0x3 << 24)
-#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET (22)
-#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK (0x3 << 22)
-#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET (20)
-#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK (0x3 << 20)
-#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL (0x1 << 19)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL (0x1 << 19)
-#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL (0x1 << 18)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET (16)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK (0x3 << 16)
-#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_OFFSET (16)
-#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_MASK (0x3 << 16)
-#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET (14)
-#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK (0x3 << 14)
-#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET (12)
-#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK (0x3 << 12)
-#define MXC_CCM_CSCMR1_SSI3_CLK_SEL (0x1 << 11)
-#define MXC_CCM_CSCMR1_VPU_RCLK_SEL (0x1 << 10)
-#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET (8)
-#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK (0x3 << 8)
-#define MXC_CCM_CSCMR1_TVE_CLK_SEL (0x1 << 7)
-#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL (0x1 << 6)
-#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET (4)
-#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK (0x3 << 4)
-#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET (2)
-#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK (0x3 << 2)
-#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL (0x1 << 1)
-#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL (0x1)
-
-/* Define the bits in register CSCMR2 */
-#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET(n) (26+n*3)
-#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK(n) (0x7 << (26+n*3))
-#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET (24)
-#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK (0x3 << 24)
-#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET (22)
-#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK (0x3 << 22)
-#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET (20)
-#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK (0x3 << 20)
-#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET (18)
-#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK (0x3 << 18)
-#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET (16)
-#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK (0x3 << 16)
-#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET (14)
-#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK (0x3 << 14)
-#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET (12)
-#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK (0x3 << 12)
-#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET (10)
-#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK (0x3 << 10)
-#define MXC_CCM_CSCMR2_SLIMBUS_COM (0x1 << 9)
-#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET (6)
-#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK (0x7 << 6)
-#define MXC_CCM_CSCMR2_SPDIF1_COM (1 << 5)
-#define MXC_CCM_CSCMR2_SPDIF0_COM (1 << 4)
-#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET (2)
-#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK (0x3 << 2)
-#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET (0)
-#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK (0x3)
-
-/* Define the bits in register CSCDR1 */
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET (22)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK (0x7 << 22)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET (19)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK (0x7 << 19)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_OFFSET (22)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_MASK (0x7 << 22)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_OFFSET (19)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_MASK (0x7 << 19)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET (14)
-#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK (0x3 << 14)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET (11)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK (0x7 << 11)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET (8)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET (6)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6)
-#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET (3)
-#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK (0x7 << 3)
-#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK (0x7)
-
-/* Define the bits in register CS1CDR and CS2CDR */
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET (22)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK (0x7 << 22)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET (16)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK (0x3F << 16)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK (0x3F)
-
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET (22)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK (0x7 << 22)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET (16)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK (0x3F << 16)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK (0x3F)
-
-/* Define the bits in register CDCDR */
-#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET (28)
-#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK (0x7 << 28)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET (25)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK (0x7 << 25)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET (19)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK (0x3F << 19)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET (9)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK (0x3F << 9)
-#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET (3)
-#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK (0x7 << 3)
-#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET (0)
-#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK (0x7)
-
-/* Define the bits in register CHSCCDR */
-#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET (12)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK (0x7 << 12)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET (6)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK (0x3F << 6)
-#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET (3)
-#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK (0x7 << 3)
-#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK (0x7)
-
-/* Define the bits in register CSCDR2 */
-#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET (25)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK (0x7 << 25)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET (19)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK (0x3F << 19)
-#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET (9)
-#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK (0x3F << 9)
-#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET (0)
-#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK (0x3F)
-
-/* Define the bits in register CSCDR3 */
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET (9)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK (0x3F << 9)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK (0x3F)
-
-/* Define the bits in register CSCDR4 */
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET (9)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK (0x3F << 9)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK (0x3F)
-
-/* Define the bits in register CDHIPR */
-#define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16)
-#define MXC_CCM_CDHIPR_DDR_HF_CLK_SEL_BUSY (1 << 8)
-#define MXC_CCM_CDHIPR_DDR_PODF_BUSY (1 << 7)
-#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY (1 << 6)
-#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5)
-#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY (1 << 4)
-#define MXC_CCM_CDHIPR_AHB_PODF_BUSY (1 << 3)
-#define MXC_CCM_CDHIPR_EMI_PODF_BUSY (1 << 2)
-#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY (1 << 1)
-#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY (1 << 0)
-
-/* Define the bits in register CDCR */
-#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER (0x1 << 2)
-#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET (0)
-#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK (0x3)
-
-/* Define the bits in register CLPCR */
-#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS (0x1 << 23)
-#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS (0x1 << 22)
-#define MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 21)
-#define MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 25)
-#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS (0x1 << 20)
-#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS (0x1 << 19)
-#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18)
-#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS (0x1 << 17)
-#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS (0x1 << 16)
-#define MXC_CCM_CLPCR_COSC_PWRDOWN (0x1 << 11)
-#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET (9)
-#define MXC_CCM_CLPCR_STBY_COUNT_MASK (0x3 << 9)
-#define MXC_CCM_CLPCR_VSTBY (0x1 << 8)
-#define MXC_CCM_CLPCR_DIS_REF_OSC (0x1 << 7)
-#define MXC_CCM_CLPCR_SBYOS (0x1 << 6)
-#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
-#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET (3)
-#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK (0x3 << 3)
-#define MXC_CCM_CLPCR_LPM_OFFSET (0)
-#define MXC_CCM_CLPCR_LPM_MASK (0x3)
-
-/* Define the bits in register CISR */
-#define MXC_CCM_CISR_ARM_PODF_LOADED (0x1 << 25)
-#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21)
-#define MXC_CCM_CISR_AHB_PODF_LOADED (0x1 << 20)
-#define MXC_CCM_CISR_EMI_PODF_LOADED (0x1 << 19)
-#define MXC_CCM_CISR_AXI_B_PODF_LOADED (0x1 << 18)
-#define MXC_CCM_CISR_AXI_A_PODF_LOADED (0x1 << 17)
-#define MXC_CCM_CISR_DIVIDER_LOADED (0x1 << 16)
-#define MXC_CCM_CISR_COSC_READY (0x1 << 6)
-#define MXC_CCM_CISR_CKIH2_READY (0x1 << 5)
-#define MXC_CCM_CISR_CKIH_READY (0x1 << 4)
-#define MXC_CCM_CISR_FPM_READY (0x1 << 3)
-#define MXC_CCM_CISR_LRF_PLL3 (0x1 << 2)
-#define MXC_CCM_CISR_LRF_PLL2 (0x1 << 1)
-#define MXC_CCM_CISR_LRF_PLL1 (0x1)
-
-/* Define the bits in register CIMR */
-#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED (0x1 << 25)
-#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21)
-#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED (0x1 << 20)
-#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED (0x1 << 19)
-#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED (0x1 << 18)
-#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED (0x1 << 17)
-#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED (0x1 << 16)
-#define MXC_CCM_CIMR_MASK_COSC_READY (0x1 << 5)
-#define MXC_CCM_CIMR_MASK_CKIH_READY (0x1 << 4)
-#define MXC_CCM_CIMR_MASK_FPM_READY (0x1 << 3)
-#define MXC_CCM_CIMR_MASK_LRF_PLL3 (0x1 << 2)
-#define MXC_CCM_CIMR_MASK_LRF_PLL2 (0x1 << 1)
-#define MXC_CCM_CIMR_MASK_LRF_PLL1 (0x1)
-
-/* Define the bits in register CCOSR */
-#define MXC_CCM_CCOSR_CKO2_EN_OFFSET (0x1 << 24)
-#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET (21)
-#define MXC_CCM_CCOSR_CKO2_DIV_MASK (0x7 << 21)
-#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET (16)
-#define MXC_CCM_CCOSR_CKO2_SEL_MASK (0x1F << 16)
-#define MXC_CCM_CCOSR_CKOL_EN (0x1 << 7)
-#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET (4)
-#define MXC_CCM_CCOSR_CKOL_DIV_MASK (0x7 << 4)
-#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET (0)
-#define MXC_CCM_CCOSR_CKOL_SEL_MASK (0xF)
-
-/* Define the bits in registers CGPR */
-#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE (0x1 << 4)
-#define MXC_CCM_CGPR_FPM_SEL (0x1 << 3)
-#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET (0)
-#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK (0x7)
-
-/* Define the bits in registers CCGRx */
-#define MXC_CCM_CCGRx_CG_MASK 0x3
-#define MXC_CCM_CCGRx_MOD_OFF 0x0
-#define MXC_CCM_CCGRx_MOD_ON 0x3
-#define MXC_CCM_CCGRx_MOD_IDLE 0x1
-
-#define MXC_CCM_CCGRx_CG15_MASK (0x3 << 30)
-#define MXC_CCM_CCGRx_CG14_MASK (0x3 << 28)
-#define MXC_CCM_CCGRx_CG13_MASK (0x3 << 26)
-#define MXC_CCM_CCGRx_CG12_MASK (0x3 << 24)
-#define MXC_CCM_CCGRx_CG11_MASK (0x3 << 22)
-#define MXC_CCM_CCGRx_CG10_MASK (0x3 << 20)
-#define MXC_CCM_CCGRx_CG9_MASK (0x3 << 18)
-#define MXC_CCM_CCGRx_CG8_MASK (0x3 << 16)
-#define MXC_CCM_CCGRx_CG5_MASK (0x3 << 10)
-#define MXC_CCM_CCGRx_CG4_MASK (0x3 << 8)
-#define MXC_CCM_CCGRx_CG3_MASK (0x3 << 6)
-#define MXC_CCM_CCGRx_CG2_MASK (0x3 << 4)
-#define MXC_CCM_CCGRx_CG1_MASK (0x3 << 2)
-#define MXC_CCM_CCGRx_CG0_MASK (0x3 << 0)
-
-#define MXC_CCM_CCGRx_CG15_OFFSET 30
-#define MXC_CCM_CCGRx_CG14_OFFSET 28
-#define MXC_CCM_CCGRx_CG13_OFFSET 26
-#define MXC_CCM_CCGRx_CG12_OFFSET 24
-#define MXC_CCM_CCGRx_CG11_OFFSET 22
-#define MXC_CCM_CCGRx_CG10_OFFSET 20
-#define MXC_CCM_CCGRx_CG9_OFFSET 18
-#define MXC_CCM_CCGRx_CG8_OFFSET 16
-#define MXC_CCM_CCGRx_CG7_OFFSET 14
-#define MXC_CCM_CCGRx_CG6_OFFSET 12
-#define MXC_CCM_CCGRx_CG5_OFFSET 10
-#define MXC_CCM_CCGRx_CG4_OFFSET 8
-#define MXC_CCM_CCGRx_CG3_OFFSET 6
-#define MXC_CCM_CCGRx_CG2_OFFSET 4
-#define MXC_CCM_CCGRx_CG1_OFFSET 2
-#define MXC_CCM_CCGRx_CG0_OFFSET 0
-
-#define MXC_DPTC_LP_BASE (MX51_GPC_BASE + 0x80)
-#define MXC_DPTC_GP_BASE (MX51_GPC_BASE + 0x100)
-#define MXC_DVFS_CORE_BASE (MX51_GPC_BASE + 0x180)
-#define MXC_DPTC_PER_BASE (MX51_GPC_BASE + 0x1C0)
-#define MXC_PGC_IPU_BASE (MX51_GPC_BASE + 0x220)
-#define MXC_PGC_VPU_BASE (MX51_GPC_BASE + 0x240)
-#define MXC_PGC_GPU_BASE (MX51_GPC_BASE + 0x260)
-#define MXC_SRPG_NEON_BASE (MX51_GPC_BASE + 0x280)
-#define MXC_SRPG_ARM_BASE (MX51_GPC_BASE + 0x2A0)
-#define MXC_SRPG_EMPGC0_BASE (MX51_GPC_BASE + 0x2C0)
-#define MXC_SRPG_EMPGC1_BASE (MX51_GPC_BASE + 0x2D0)
-#define MXC_SRPG_MEGAMIX_BASE (MX51_GPC_BASE + 0x2E0)
-#define MXC_SRPG_EMI_BASE (MX51_GPC_BASE + 0x300)
-
-/* CORTEXA8 platform */
-#define MXC_CORTEXA8_PLAT_PVID (MX51_CORTEXA8_BASE + 0x0)
-#define MXC_CORTEXA8_PLAT_GPC (MX51_CORTEXA8_BASE + 0x4)
-#define MXC_CORTEXA8_PLAT_PIC (MX51_CORTEXA8_BASE + 0x8)
-#define MXC_CORTEXA8_PLAT_LPC (MX51_CORTEXA8_BASE + 0xC)
-#define MXC_CORTEXA8_PLAT_NEON_LPC (MX51_CORTEXA8_BASE + 0x10)
-#define MXC_CORTEXA8_PLAT_ICGC (MX51_CORTEXA8_BASE + 0x14)
-#define MXC_CORTEXA8_PLAT_AMC (MX51_CORTEXA8_BASE + 0x18)
-#define MXC_CORTEXA8_PLAT_NMC (MX51_CORTEXA8_BASE + 0x20)
-#define MXC_CORTEXA8_PLAT_NMS (MX51_CORTEXA8_BASE + 0x24)
-
-/* DVFS CORE */
-#define MXC_DVFSTHRS (MXC_DVFS_CORE_BASE + 0x00)
-#define MXC_DVFSCOUN (MXC_DVFS_CORE_BASE + 0x04)
-#define MXC_DVFSSIG1 (MXC_DVFS_CORE_BASE + 0x08)
-#define MXC_DVFSSIG0 (MXC_DVFS_CORE_BASE + 0x0C)
-#define MXC_DVFSGPC0 (MXC_DVFS_CORE_BASE + 0x10)
-#define MXC_DVFSGPC1 (MXC_DVFS_CORE_BASE + 0x14)
-#define MXC_DVFSGPBT (MXC_DVFS_CORE_BASE + 0x18)
-#define MXC_DVFSEMAC (MXC_DVFS_CORE_BASE + 0x1C)
-#define MXC_DVFSCNTR (MXC_DVFS_CORE_BASE + 0x20)
-#define MXC_DVFSLTR0_0 (MXC_DVFS_CORE_BASE + 0x24)
-#define MXC_DVFSLTR0_1 (MXC_DVFS_CORE_BASE + 0x28)
-#define MXC_DVFSLTR1_0 (MXC_DVFS_CORE_BASE + 0x2C)
-#define MXC_DVFSLTR1_1 (MXC_DVFS_CORE_BASE + 0x30)
-#define MXC_DVFSPT0 (MXC_DVFS_CORE_BASE + 0x34)
-#define MXC_DVFSPT1 (MXC_DVFS_CORE_BASE + 0x38)
-#define MXC_DVFSPT2 (MXC_DVFS_CORE_BASE + 0x3C)
-#define MXC_DVFSPT3 (MXC_DVFS_CORE_BASE + 0x40)
-
-/* GPC */
-#define MXC_GPC_CNTR (MX51_GPC_BASE + 0x0)
-#define MXC_GPC_PGR (MX51_GPC_BASE + 0x4)
-#define MXC_GPC_VCR (MX51_GPC_BASE + 0x8)
-#define MXC_GPC_ALL_PU (MX51_GPC_BASE + 0xC)
-#define MXC_GPC_NEON (MX51_GPC_BASE + 0x10)
-#define MXC_GPC_PGR_ARMPG_OFFSET 8
-#define MXC_GPC_PGR_ARMPG_MASK (3 << 8)
-
-/* PGC */
-#define MXC_PGC_IPU_PGCR (MXC_PGC_IPU_BASE + 0x0)
-#define MXC_PGC_IPU_PGSR (MXC_PGC_IPU_BASE + 0xC)
-#define MXC_PGC_VPU_PGCR (MXC_PGC_VPU_BASE + 0x0)
-#define MXC_PGC_VPU_PGSR (MXC_PGC_VPU_BASE + 0xC)
-#define MXC_PGC_GPU_PGCR (MXC_PGC_GPU_BASE + 0x0)
-#define MXC_PGC_GPU_PGSR (MXC_PGC_GPU_BASE + 0xC)
-
-#define MXC_PGCR_PCR 1
-#define MXC_SRPGCR_PCR 1
-#define MXC_EMPGCR_PCR 1
-#define MXC_PGSR_PSR 1
-
-
-#define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0)
-#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1)
-
-/* SRPG */
-#define MXC_SRPG_NEON_SRPGCR (MXC_SRPG_NEON_BASE + 0x0)
-#define MXC_SRPG_NEON_PUPSCR (MXC_SRPG_NEON_BASE + 0x4)
-#define MXC_SRPG_NEON_PDNSCR (MXC_SRPG_NEON_BASE + 0x8)
-
-#define MXC_SRPG_ARM_SRPGCR (MXC_SRPG_ARM_BASE + 0x0)
-#define MXC_SRPG_ARM_PUPSCR (MXC_SRPG_ARM_BASE + 0x4)
-#define MXC_SRPG_ARM_PDNSCR (MXC_SRPG_ARM_BASE + 0x8)
-
-#define MXC_SRPG_EMPGC0_SRPGCR (MXC_SRPG_EMPGC0_BASE + 0x0)
-#define MXC_SRPG_EMPGC0_PUPSCR (MXC_SRPG_EMPGC0_BASE + 0x4)
-#define MXC_SRPG_EMPGC0_PDNSCR (MXC_SRPG_EMPGC0_BASE + 0x8)
-
-#define MXC_SRPG_EMPGC1_SRPGCR (MXC_SRPG_EMPGC1_BASE + 0x0)
-#define MXC_SRPG_EMPGC1_PUPSCR (MXC_SRPG_EMPGC1_BASE + 0x4)
-#define MXC_SRPG_EMPGC1_PDNSCR (MXC_SRPG_EMPGC1_BASE + 0x8)
-
-#define MXC_SRPG_MEGAMIX_SRPGCR (MXC_SRPG_MEGAMIX_BASE + 0x0)
-#define MXC_SRPG_MEGAMIX_PUPSCR (MXC_SRPG_MEGAMIX_BASE + 0x4)
-#define MXC_SRPG_MEGAMIX_PDNSCR (MXC_SRPG_MEGAMIX_BASE + 0x8)
-
-#define MXC_SRPGC_EMI_SRPGCR (MXC_SRPGC_EMI_BASE + 0x0)
-#define MXC_SRPGC_EMI_PUPSCR (MXC_SRPGC_EMI_BASE + 0x4)
-#define MXC_SRPGC_EMI_PDNSCR (MXC_SRPGC_EMI_BASE + 0x8)
-
-#endif /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h
deleted file mode 100644
index 26389f3..0000000
--- a/arch/arm/mach-imx/devices-imx51.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_fec_data imx51_fec_data;
-#define imx51_add_fec(pdata) \
- imx_add_fec(&imx51_fec_data, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data;
-#define imx51_add_fsl_usb2_udc(pdata) \
- imx_add_fsl_usb2_udc(&imx51_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
-#define imx51_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
-#define imx51_add_hsi2c(pdata) \
- imx51_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
-#define imx51_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[];
-#define imx51_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
-
-extern const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data;
-#define imx51_add_mxc_ehci_otg(pdata) \
- imx_add_mxc_ehci(&imx51_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[];
-#define imx51_add_mxc_ehci_hs(id, pdata) \
- imx_add_mxc_ehci(&imx51_mxc_ehci_hs_data[id - 1], pdata)
-
-extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
-#define imx51_add_mxc_nand(pdata) \
- imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx51_sdhci_esdhc_imx_data[];
-#define imx51_add_sdhci_esdhc_imx(id, pdata) \
- imx_add_sdhci_esdhc_imx(&imx51_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx51_cspi_data;
-#define imx51_add_cspi(pdata) \
- imx_add_spi_imx(&imx51_cspi_data, pdata)
-
-extern const struct imx_spi_imx_data imx51_ecspi_data[];
-#define imx51_add_ecspi(id, pdata) \
- imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
-
-extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
-#define imx51_add_imx2_wdt(id) \
- imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
-
-extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
-#define imx51_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
-
-extern const struct imx_pata_imx_data imx51_pata_imx_data;
-#define imx51_add_pata_imx() \
- imx_add_pata_imx(&imx51_pata_imx_data)
diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
index 2d260a5..1d2cc18 100644
--- a/arch/arm/mach-imx/devices/Kconfig
+++ b/arch/arm/mach-imx/devices/Kconfig
@@ -1,6 +1,6 @@
config IMX_HAVE_PLATFORM_FEC
bool
- default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
+ default y if SOC_IMX25 || SOC_IMX27 || SOC_IMX35
config IMX_HAVE_PLATFORM_FLEXCAN
bool
@@ -10,7 +10,6 @@
config IMX_HAVE_PLATFORM_GPIO_KEYS
bool
- default y if SOC_IMX51
config IMX_HAVE_PLATFORM_IMX21_HCD
bool
@@ -43,15 +42,9 @@
config IMX_HAVE_PLATFORM_IMX_UART
bool
-config IMX_HAVE_PLATFORM_IMX_UDC
- bool
-
config IMX_HAVE_PLATFORM_IPU_CORE
bool
-config IMX_HAVE_PLATFORM_MX1_CAMERA
- bool
-
config IMX_HAVE_PLATFORM_MX2_CAMERA
bool
diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile
index 1cbc14c..8fdb12b 100644
--- a/arch/arm/mach-imx/devices/Makefile
+++ b/arch/arm/mach-imx/devices/Makefile
@@ -16,9 +16,7 @@
obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 61352a8..67f7fb1 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -176,22 +176,6 @@
const struct imx_imx_uart_1irq_data *data,
const struct imxuart_platform_data *pdata);
-#include <linux/platform_data/usb-imx_udc.h>
-struct imx_imx_udc_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq0;
- resource_size_t irq1;
- resource_size_t irq2;
- resource_size_t irq3;
- resource_size_t irq4;
- resource_size_t irq5;
- resource_size_t irq6;
-};
-struct platform_device *__init imx_add_imx_udc(
- const struct imx_imx_udc_data *data,
- const struct imxusb_platform_data *pdata);
-
#include <linux/platform_data/video-mx3fb.h>
#include <linux/platform_data/camera-mx3.h>
struct imx_ipu_core_data {
@@ -208,16 +192,6 @@
const struct imx_ipu_core_data *data,
struct mx3fb_platform_data *pdata);
-#include <linux/platform_data/camera-mx1.h>
-struct imx_mx1_camera_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_mx1_camera(
- const struct imx_mx1_camera_data *data,
- const struct mx1_camera_pdata *pdata);
-
#include <linux/platform_data/camera-mx2.h>
struct imx_mx2_camera_data {
const char *devid;
diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c
index 63eba08..d86f925 100644
--- a/arch/arm/mach-imx/devices/platform-fec.c
+++ b/arch/arm/mach-imx/devices/platform-fec.c
@@ -35,18 +35,6 @@
imx_fec_data_entry_single(MX35, "imx27-fec");
#endif
-#ifdef CONFIG_SOC_IMX51
-/* i.mx51 has the i.mx27 type fec */
-const struct imx_fec_data imx51_fec_data __initconst =
- imx_fec_data_entry_single(MX51, "imx27-fec");
-#endif
-
-#ifdef CONFIG_SOC_IMX53
-/* i.mx53 has the i.mx25 type fec */
-const struct imx_fec_data imx53_fec_data __initconst =
- imx_fec_data_entry_single(MX53, "imx25-fec");
-#endif
-
struct platform_device *__init imx_add_fec(
const struct imx_fec_data *data,
const struct fec_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
index 3c06bd9..23b0061 100644
--- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
@@ -38,11 +38,6 @@
imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
-#endif
-
struct platform_device *__init imx_add_fsl_usb2_udc(
const struct imx_fsl_usb2_udc_data *data,
const struct fsl_usb2_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c
index 57d342e..644ac26 100644
--- a/arch/arm/mach-imx/devices/platform-imx-i2c.c
+++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c
@@ -70,32 +70,6 @@
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
-#define imx51_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX51, "imx21-i2c", _id, _hwid, SZ_4K)
- imx51_imx_i2c_data_entry(0, 1),
- imx51_imx_i2c_data_entry(1, 2),
- {
- .devid = "imx21-i2c",
- .id = 2,
- .iobase = MX51_HSI2C_DMA_BASE_ADDR,
- .iosize = SZ_16K,
- .irq = MX51_INT_HS_I2C,
- },
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = {
-#define imx53_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX53, "imx21-i2c", _id, _hwid, SZ_4K)
- imx53_imx_i2c_data_entry(0, 1),
- imx53_imx_i2c_data_entry(1, 2),
- imx53_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_imx_i2c(
const struct imx_imx_i2c_data *data,
const struct imxi2c_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c
index 8f22a4c..f42200b 100644
--- a/arch/arm/mach-imx/devices/platform-imx-keypad.c
+++ b/arch/arm/mach-imx/devices/platform-imx-keypad.c
@@ -41,16 +41,6 @@
imx_imx_keypad_data_entry_single(MX35, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX51, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_keypad_data imx53_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX53, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_imx_keypad(
const struct imx_imx_keypad_data *data,
const struct matrix_keymap_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c
index bfcb8f3..1c7c721 100644
--- a/arch/arm/mach-imx/devices/platform-imx-ssi.c
+++ b/arch/arm/mach-imx/devices/platform-imx-ssi.c
@@ -66,26 +66,6 @@
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = {
-#define imx51_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_16K)
- imx51_imx_ssi_data_entry(0, 1),
- imx51_imx_ssi_data_entry(1, 2),
- imx51_imx_ssi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_ssi_data imx53_imx_ssi_data[] __initconst = {
-#define imx53_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX53, _id, _hwid, SZ_16K)
- imx53_imx_ssi_data_entry(0, 1),
- imx53_imx_ssi_data_entry(1, 2),
- imx53_imx_ssi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_imx_ssi(
const struct imx_imx_ssi_data *data,
const struct imx_ssi_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c
index faac4aa..8c01836 100644
--- a/arch/arm/mach-imx/devices/platform-imx-uart.c
+++ b/arch/arm/mach-imx/devices/platform-imx-uart.c
@@ -94,28 +94,6 @@
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = {
-#define imx51_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX51, _id, _hwid, SZ_4K)
- imx51_imx_uart_data_entry(0, 1),
- imx51_imx_uart_data_entry(1, 2),
- imx51_imx_uart_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst = {
-#define imx53_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX53, _id, _hwid, SZ_4K)
- imx53_imx_uart_data_entry(0, 1),
- imx53_imx_uart_data_entry(1, 2),
- imx53_imx_uart_data_entry(2, 3),
- imx53_imx_uart_data_entry(3, 4),
- imx53_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_imx_uart_3irq(
const struct imx_imx_uart_3irq_data *data,
const struct imxuart_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c
index ec75d64..54f63bc 100644
--- a/arch/arm/mach-imx/devices/platform-imx2-wdt.c
+++ b/arch/arm/mach-imx/devices/platform-imx2-wdt.c
@@ -45,24 +45,6 @@
imx_imx2_wdt_data_entry_single(MX35, 0, , SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst = {
-#define imx51_imx2_wdt_data_entry(_id, _hwid) \
- imx_imx2_wdt_data_entry(MX51, _id, _hwid, SZ_16K)
- imx51_imx2_wdt_data_entry(0, 1),
- imx51_imx2_wdt_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst = {
-#define imx53_imx2_wdt_data_entry(_id, _hwid) \
- imx_imx2_wdt_data_entry(MX53, _id, _hwid, SZ_16K)
- imx53_imx2_wdt_data_entry(0, 1),
- imx53_imx2_wdt_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_imx2_wdt(
const struct imx_imx2_wdt_data *data)
{
diff --git a/arch/arm/mach-imx/devices/platform-imx_udc.c b/arch/arm/mach-imx/devices/platform-imx_udc.c
deleted file mode 100644
index 5ced7e4..0000000
--- a/arch/arm/mach-imx/devices/platform-imx_udc.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_udc_data_entry_single(soc, _size) \
- { \
- .iobase = soc ## _USBD_BASE_ADDR, \
- .iosize = _size, \
- .irq0 = soc ## _INT_USBD0, \
- .irq1 = soc ## _INT_USBD1, \
- .irq2 = soc ## _INT_USBD2, \
- .irq3 = soc ## _INT_USBD3, \
- .irq4 = soc ## _INT_USBD4, \
- .irq5 = soc ## _INT_USBD5, \
- .irq6 = soc ## _INT_USBD6, \
- }
-
-#define imx_imx_udc_data_entry(soc, _size) \
- [_id] = imx_imx_udc_data_entry_single(soc, _size)
-
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_udc_data imx1_imx_udc_data __initconst =
- imx_imx_udc_data_entry_single(MX1, SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
-struct platform_device *__init imx_add_imx_udc(
- const struct imx_imx_udc_data *data,
- const struct imxusb_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq0,
- .end = data->irq0,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq1,
- .end = data->irq1,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq2,
- .end = data->irq2,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq3,
- .end = data->irq3,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq4,
- .end = data->irq4,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq5,
- .end = data->irq5,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq6,
- .end = data->irq6,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device("imx_udc", 0,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mx1-camera.c b/arch/arm/mach-imx/devices/platform-mx1-camera.c
deleted file mode 100644
index 2c67881..0000000
--- a/arch/arm/mach-imx/devices/platform-mx1-camera.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mx1_camera_data_entry_single(soc, _size) \
- { \
- .iobase = soc ## _CSI ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_CSI, \
- }
-
-#ifdef CONFIG_SOC_IMX1
-const struct imx_mx1_camera_data imx1_mx1_camera_data __initconst =
- imx_mx1_camera_data_entry_single(MX1, 10);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
-struct platform_device *__init imx_add_mx1_camera(
- const struct imx_mx1_camera_data *data,
- const struct mx1_camera_pdata *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask("mx1-camera", 0,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc-ehci.c b/arch/arm/mach-imx/devices/platform-mxc-ehci.c
index 5d4bbbf..2963536 100644
--- a/arch/arm/mach-imx/devices/platform-mxc-ehci.c
+++ b/arch/arm/mach-imx/devices/platform-mxc-ehci.c
@@ -50,15 +50,6 @@
imx_mxc_ehci_data_entry_single(MX35, 1, HS);
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data __initconst =
- imx_mxc_ehci_data_entry_single(MX51, 0, OTG);
-const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[] __initconst = {
- imx_mxc_ehci_data_entry_single(MX51, 1, HS1),
- imx_mxc_ehci_data_entry_single(MX51, 2, HS2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
struct platform_device *__init imx_add_mxc_ehci(
const struct imx_mxc_ehci_data *data,
const struct mxc_usbh_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c
index 7af1c53..fa618a3 100644
--- a/arch/arm/mach-imx/devices/platform-mxc_nand.c
+++ b/arch/arm/mach-imx/devices/platform-mxc_nand.c
@@ -54,11 +54,6 @@
imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K);
#endif
-#ifdef CONFIG_SOC_IMX51
-const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst =
- imx_mxc_nandv3_data_entry_single(MX51, "imx51-nand", SZ_16K);
-#endif
-
struct platform_device *__init imx_add_mxc_nand(
const struct imx_mxc_nand_data *data,
const struct mxc_nand_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-mxc_rnga.c b/arch/arm/mach-imx/devices/platform-mxc_rnga.c
index c58404b..851fbc8a 100644
--- a/arch/arm/mach-imx/devices/platform-mxc_rnga.c
+++ b/arch/arm/mach-imx/devices/platform-mxc_rnga.c
@@ -48,9 +48,6 @@
#endif /* if defined(CONFIG_SOC_IMX31) */
ret = ERR_PTR(-ENODEV);
- if (IS_ERR(ret))
- return PTR_ERR(ret);
-
- return 0;
+ return PTR_ERR_OR_ZERO(ret);
}
arch_initcall(imxXX_add_mxc_rnga);
diff --git a/arch/arm/mach-imx/devices/platform-pata_imx.c b/arch/arm/mach-imx/devices/platform-pata_imx.c
index e4ec11c..1c7f895 100644
--- a/arch/arm/mach-imx/devices/platform-pata_imx.c
+++ b/arch/arm/mach-imx/devices/platform-pata_imx.c
@@ -28,16 +28,6 @@
imx_pata_imx_data_entry_single(MX35, SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_pata_imx_data imx51_pata_imx_data __initconst =
- imx_pata_imx_data_entry_single(MX51, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_pata_imx_data imx53_pata_imx_data __initconst =
- imx_pata_imx_data_entry_single(MX53, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_pata_imx(
const struct imx_pata_imx_data *data)
{
diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
index e66a4e3..fb8d4a2 100644
--- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
+++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
@@ -43,30 +43,6 @@
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_sdhci_esdhc_imx_data
-imx51_sdhci_esdhc_imx_data[] __initconst = {
-#define imx51_sdhci_esdhc_imx_data_entry(_id, _hwid) \
- imx_sdhci_esdhc_imx_data_entry(MX51, "sdhci-esdhc-imx51", _id, _hwid)
- imx51_sdhci_esdhc_imx_data_entry(0, 1),
- imx51_sdhci_esdhc_imx_data_entry(1, 2),
- imx51_sdhci_esdhc_imx_data_entry(2, 3),
- imx51_sdhci_esdhc_imx_data_entry(3, 4),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_sdhci_esdhc_imx_data
-imx53_sdhci_esdhc_imx_data[] __initconst = {
-#define imx53_sdhci_esdhc_imx_data_entry(_id, _hwid) \
- imx_sdhci_esdhc_imx_data_entry(MX53, "sdhci-esdhc-imx53", _id, _hwid)
- imx53_sdhci_esdhc_imx_data_entry(0, 1),
- imx53_sdhci_esdhc_imx_data_entry(1, 2),
- imx53_sdhci_esdhc_imx_data_entry(2, 3),
- imx53_sdhci_esdhc_imx_data_entry(3, 4),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
static const struct esdhc_platform_data default_esdhc_pdata __initconst = {
.wp_type = ESDHC_WP_NONE,
.cd_type = ESDHC_CD_NONE,
diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c
index 8880bcb..aca825d 100644
--- a/arch/arm/mach-imx/devices/platform-spi_imx.c
+++ b/arch/arm/mach-imx/devices/platform-spi_imx.c
@@ -79,33 +79,6 @@
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-/* i.mx51 has the i.mx35 type cspi */
-const struct imx_spi_imx_data imx51_cspi_data __initconst =
- imx_spi_imx_data_entry_single(MX51, CSPI, "imx35-cspi", 2, , SZ_4K);
-
-const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = {
-#define imx51_ecspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX51, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K)
- imx51_ecspi_data_entry(0, 1),
- imx51_ecspi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-/* i.mx53 has the i.mx35 type cspi */
-const struct imx_spi_imx_data imx53_cspi_data __initconst =
- imx_spi_imx_data_entry_single(MX53, CSPI, "imx35-cspi", 2, , SZ_4K);
-
-/* i.mx53 has the i.mx51 type ecspi */
-const struct imx_spi_imx_data imx53_ecspi_data[] __initconst = {
-#define imx53_ecspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX53, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K)
- imx53_ecspi_data_entry(0, 1),
- imx53_ecspi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_spi_imx(
const struct imx_spi_imx_data *data,
const struct spi_imx_master *pdata)
diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c
index 134c190..42a5a3d 100644
--- a/arch/arm/mach-imx/ehci-imx25.c
+++ b/arch/arm/mach-imx/ehci-imx25.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c
index 448d911..c569743 100644
--- a/arch/arm/mach-imx/ehci-imx27.c
+++ b/arch/arm/mach-imx/ehci-imx27.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c
index 05de4e1..bede21d 100644
--- a/arch/arm/mach-imx/ehci-imx31.c
+++ b/arch/arm/mach-imx/ehci-imx31.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c
index 554e7cc..f424a54 100644
--- a/arch/arm/mach-imx/ehci-imx35.c
+++ b/arch/arm/mach-imx/ehci-imx35.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c
deleted file mode 100644
index e49710b..0000000
--- a/arch/arm/mach-imx/ehci-imx5.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "hardware.h"
-
-#define MXC_OTG_OFFSET 0
-#define MXC_H1_OFFSET 0x200
-#define MXC_H2_OFFSET 0x400
-
-/* USB_CTRL */
-#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */
-#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */
-#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */
-#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */
-
-/* USB_PHY_CTRL_FUNC */
-#define MXC_OTG_PHYCTRL_OC_POL_BIT (1 << 9) /* OTG Polarity of Overcurrent */
-#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */
-#define MXC_H1_OC_POL_BIT (1 << 6) /* UH1 Polarity of Overcurrent */
-#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */
-#define MXC_OTG_PHYCTRL_PWR_POL_BIT (1 << 3) /* OTG Power Pin Polarity */
-
-/* USBH2CTRL */
-#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8)
-#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7)
-#define MXC_H2_UCTRL_H2PM_BIT (1 << 4)
-
-#define MXC_USBCMD_OFFSET 0x140
-
-/* USBCMD */
-#define MXC_UCMD_ITC_NO_THRESHOLD_MASK (~(0xff << 16)) /* Interrupt Threshold Control */
-
-int mx51_initialize_usb_hw(int port, unsigned int flags)
-{
- unsigned int v;
- void __iomem *usb_base;
- void __iomem *usbotg_base;
- void __iomem *usbother_base;
- int ret = 0;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base) {
- printk(KERN_ERR "%s(): ioremap failed\n", __func__);
- return -ENOMEM;
- }
-
- switch (port) {
- case 0: /* OTG port */
- usbotg_base = usb_base + MXC_OTG_OFFSET;
- break;
- case 1: /* Host 1 port */
- usbotg_base = usb_base + MXC_H1_OFFSET;
- break;
- case 2: /* Host 2 port */
- usbotg_base = usb_base + MXC_H2_OFFSET;
- break;
- default:
- printk(KERN_ERR"%s no such port %d\n", __func__, port);
- ret = -ENOENT;
- goto error;
- }
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- switch (port) {
- case 0: /*OTG port */
- if (flags & MXC_EHCI_INTERNAL_PHY) {
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
- if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
- v |= MXC_OTG_PHYCTRL_OC_POL_BIT;
- else
- v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT;
- if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
- /* OC/USBPWR is used */
- v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
- } else {
- /* OC/USBPWR is not used */
- v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
- }
- if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
- v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
- else
- v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT;
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
- v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
- if (flags & MXC_EHCI_WAKEUP_ENABLED)
- v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
- else
- v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_OTG_UCTRL_OPM_BIT;
- else
- v |= MXC_OTG_UCTRL_OPM_BIT;
- __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
- }
- break;
- case 1: /* Host 1 */
- /*Host ULPI */
- v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
- if (flags & MXC_EHCI_WAKEUP_ENABLED) {
- /* HOST1 wakeup/ULPI intr enable */
- v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
- } else {
- /* HOST1 wakeup/ULPI intr disable */
- v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
- }
-
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask unused*/
- else
- v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
- __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
- if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
- v |= MXC_H1_OC_POL_BIT;
- else
- v &= ~MXC_H1_OC_POL_BIT;
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
- else
- v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
- v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
- if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
- /* Interrupt Threshold Control:Immediate (no threshold) */
- v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
- __raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
- break;
- case 2: /* Host 2 ULPI */
- v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
- if (flags & MXC_EHCI_WAKEUP_ENABLED) {
- /* HOST1 wakeup/ULPI intr enable */
- v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
- } else {
- /* HOST1 wakeup/ULPI intr disable */
- v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
- }
-
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask unused*/
- else
- v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
- __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
- break;
- }
-
-error:
- iounmap(usb_base);
- return ret;
-}
-
diff --git a/arch/arm/mach-imx/ehci.h b/arch/arm/mach-imx/ehci.h
new file mode 100644
index 0000000..0e06002
--- /dev/null
+++ b/arch/arm/mach-imx/ehci.h
@@ -0,0 +1,43 @@
+#ifndef __MACH_IMX_EHCI_H
+#define __MACH_IMX_EHCI_H
+
+/* values for portsc field */
+#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
+#define MXC_EHCI_FORCE_FS (1 << 24)
+#define MXC_EHCI_UTMI_8BIT (0 << 28)
+#define MXC_EHCI_UTMI_16BIT (1 << 28)
+#define MXC_EHCI_SERIAL (1 << 29)
+#define MXC_EHCI_MODE_UTMI (0 << 30)
+#define MXC_EHCI_MODE_PHILIPS (1 << 30)
+#define MXC_EHCI_MODE_ULPI (2 << 30)
+#define MXC_EHCI_MODE_SERIAL (3 << 30)
+
+/* values for flags field */
+#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
+#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
+#define MXC_EHCI_INTERFACE_MASK (0xf)
+
+#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
+#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
+#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
+#define MXC_EHCI_TTL_ENABLED (1 << 8)
+
+#define MXC_EHCI_INTERNAL_PHY (1 << 9)
+#define MXC_EHCI_IPPUE_DOWN (1 << 10)
+#define MXC_EHCI_IPPUE_UP (1 << 11)
+#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
+#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
+
+#define MXC_USBCTRL_OFFSET 0
+#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
+#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
+#define MXC_USBH2CTRL_OFFSET 0x14
+
+int mx25_initialize_usb_hw(int port, unsigned int flags);
+int mx31_initialize_usb_hw(int port, unsigned int flags);
+int mx35_initialize_usb_hw(int port, unsigned int flags);
+int mx27_initialize_usb_hw(int port, unsigned int flags);
+
+#endif /* __MACH_IMX_EHCI_H */
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 586e017..82ea74e 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -27,13 +27,14 @@
static u32 gpc_wake_irqs[IMR_NUM];
static u32 gpc_saved_imrs[IMR_NUM];
-void imx_gpc_pre_suspend(void)
+void imx_gpc_pre_suspend(bool arm_power_off)
{
void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
int i;
/* Tell GPC to power off ARM core when suspend */
- writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
+ if (arm_power_off)
+ writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
for (i = 0; i < IMR_NUM; i++) {
gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h
index abf43bb..66b2b56 100644
--- a/arch/arm/mach-imx/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@@ -105,8 +105,6 @@
#include "mxc.h"
-#include "mx51.h"
-#include "mx53.h"
#include "mx3x.h"
#include "mx31.h"
#include "mx35.h"
diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c
index 42a65e0..cf8032b 100644
--- a/arch/arm/mach-imx/imx25-dt.c
+++ b/arch/arm/mach-imx/imx25-dt.c
@@ -29,16 +29,10 @@
NULL
};
-static void __init imx25_timer_init(void)
-{
- mx25_clocks_init_dt();
-}
-
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
- .init_time = imx25_timer_init,
.init_machine = imx25_dt_init,
.dt_compat = imx25_dt_board_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index 17bd405..080e66c 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -34,16 +34,10 @@
NULL
};
-static void __init imx27_timer_init(void)
-{
- mx27_clocks_init_dt();
-}
-
DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .init_time = imx27_timer_init,
.init_machine = imx27_dt_init,
.dt_compat = imx27_dt_board_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c
index 581f4d6..418dbc8 100644
--- a/arch/arm/mach-imx/imx31-dt.c
+++ b/arch/arm/mach-imx/imx31-dt.c
@@ -25,7 +25,7 @@
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static const char *imx31_dt_board_compat[] __initconst = {
+static const char * const imx31_dt_board_compat[] __initconst = {
"fsl,imx31",
NULL
};
diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c
index a62854c..584fbe1 100644
--- a/arch/arm/mach-imx/imx35-dt.c
+++ b/arch/arm/mach-imx/imx35-dt.c
@@ -34,7 +34,7 @@
mx35_init_irq();
}
-static const char *imx35_dt_board_compat[] __initconst = {
+static const char * const imx35_dt_board_compat[] __initconst = {
"fsl,imx35",
NULL
};
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
deleted file mode 100644
index b8cd968..0000000
--- a/arch/arm/mach-imx/imx51-dt.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/irq.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "mx51.h"
-
-static void __init imx51_dt_init(void)
-{
- struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
-
- mxc_arch_reset_init_dt();
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
- platform_device_register_full(&devinfo);
-}
-
-static const char *imx51_dt_board_compat[] __initconst = {
- "fsl,imx51",
- NULL
-};
-
-DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .init_machine = imx51_dt_init,
- .init_late = imx51_init_late,
- .dt_compat = imx51_dt_board_compat,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/iomux-mx51.h b/arch/arm/mach-imx/iomux-mx51.h
deleted file mode 100644
index 75bbcc4..0000000
--- a/arch/arm/mach-imx/iomux-mx51.h
+++ /dev/null
@@ -1,827 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_IOMUX_MX51_H__
-#define __MACH_IOMUX_MX51_H__
-
-#include "iomux-v3.h"
-#define __NA_ 0x000
-
-
-/* Pad control groupings */
-#define MX51_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
- PAD_CTL_HYS | PAD_CTL_SRE_FAST)
-#define MX51_I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
- PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
- PAD_CTL_HYS)
-#define MX51_ESDHC_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
- PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
- PAD_CTL_HYS)
-#define MX51_USBH1_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SRE_FAST | \
- PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
- PAD_CTL_HYS | PAD_CTL_PUE)
-#define MX51_ECSPI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_HYS | \
- PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST)
-#define MX51_SDHCI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_PUE | \
- PAD_CTL_SRE_FAST | PAD_CTL_DVS)
-#define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | PAD_CTL_SRE_FAST)
-
-#define MX51_PAD_CTRL_2 (PAD_CTL_PKE | PAD_CTL_HYS)
-#define MX51_PAD_CTRL_3 (PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_CTRL_4 (PAD_CTL_PKE | PAD_CTL_DVS | PAD_CTL_HYS)
-#define MX51_PAD_CTRL_5 (PAD_CTL_DVS | PAD_CTL_DSE_HIGH)
-
-/*
- * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO<unit>_<num>
- * See also iomux-v3.h
- */
-
-/* Raw pin modes without pad control */
-/* PAD MUX ALT INPSE PATH PADCTRL */
-
-/* The same pins as above but with the default pad control values applied */
-#define MX51_PAD_EIM_D16__AUD4_RXFS IOMUX_PAD(0x3f0, 0x05c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__AUD5_TXD IOMUX_PAD(0x3f0, 0x05c, 7, 0x8d8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__EIM_D16 IOMUX_PAD(0x3f0, 0x05c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__GPIO2_0 IOMUX_PAD(0x3f0, 0x05c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__I2C1_SDA IOMUX_PAD(0x3f0, 0x05c, 0x14, 0x9b4, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D16__UART2_CTS IOMUX_PAD(0x3f0, 0x05c, 3, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D16__USBH2_DATA0 IOMUX_PAD(0x3f0, 0x05c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D17__AUD5_RXD IOMUX_PAD(0x3f4, 0x060, 7, 0x8d4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D17__EIM_D17 IOMUX_PAD(0x3f4, 0x060, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D17__GPIO2_1 IOMUX_PAD(0x3f4, 0x060, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D17__UART2_RXD IOMUX_PAD(0x3f4, 0x060, 3, 0x9ec, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D17__UART3_CTS IOMUX_PAD(0x3f4, 0x060, 4, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D17__USBH2_DATA1 IOMUX_PAD(0x3f4, 0x060, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__AUD5_TXC IOMUX_PAD(0x3f8, 0x064, 7, 0x8e4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__EIM_D18 IOMUX_PAD(0x3f8, 0x064, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__GPIO2_2 IOMUX_PAD(0x3f8, 0x064, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__UART2_TXD IOMUX_PAD(0x3f8, 0x064, 3, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D18__UART3_RTS IOMUX_PAD(0x3f8, 0x064, 4, 0x9f0, 1, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D18__USBH2_DATA2 IOMUX_PAD(0x3f8, 0x064, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__AUD4_RXC IOMUX_PAD(0x3fc, 0x068, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__AUD5_TXFS IOMUX_PAD(0x3fc, 0x068, 7, 0x8e8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__EIM_D19 IOMUX_PAD(0x3fc, 0x068, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__GPIO2_3 IOMUX_PAD(0x3fc, 0x068, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__I2C1_SCL IOMUX_PAD(0x3fc, 0x068, 0x14, 0x9b0, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D19__UART2_RTS IOMUX_PAD(0x3fc, 0x068, 3, 0x9e8, 1, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D19__USBH2_DATA3 IOMUX_PAD(0x3fc, 0x068, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__AUD4_TXD IOMUX_PAD(0x400, 0x06c, 5, 0x8c8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__EIM_D20 IOMUX_PAD(0x400, 0x06c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__GPIO2_4 IOMUX_PAD(0x400, 0x06c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB IOMUX_PAD(0x400, 0x06c, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__USBH2_DATA4 IOMUX_PAD(0x400, 0x06c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__AUD4_RXD IOMUX_PAD(0x404, 0x070, 5, 0x8c4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__EIM_D21 IOMUX_PAD(0x404, 0x070, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__GPIO2_5 IOMUX_PAD(0x404, 0x070, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB IOMUX_PAD(0x404, 0x070, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__USBH2_DATA5 IOMUX_PAD(0x404, 0x070, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__AUD4_TXC IOMUX_PAD(0x408, 0x074, 5, 0x8cc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__EIM_D22 IOMUX_PAD(0x408, 0x074, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__GPIO2_6 IOMUX_PAD(0x408, 0x074, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__USBH2_DATA6 IOMUX_PAD(0x408, 0x074, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__AUD4_TXFS IOMUX_PAD(0x40c, 0x078, 5, 0x8d0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__EIM_D23 IOMUX_PAD(0x40c, 0x078, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__GPIO2_7 IOMUX_PAD(0x40c, 0x078, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__SPDIF_OUT1 IOMUX_PAD(0x40c, 0x078, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__USBH2_DATA7 IOMUX_PAD(0x40c, 0x078, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__AUD6_RXFS IOMUX_PAD(0x410, 0x07c, 5, 0x8f8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__EIM_D24 IOMUX_PAD(0x410, 0x07c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__GPIO2_8 IOMUX_PAD(0x410, 0x07c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__I2C2_SDA IOMUX_PAD(0x410, 0x07c, 0x14, 0x9bc, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, 3, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D24__USBOTG_DATA0 IOMUX_PAD(0x410, 0x07c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D25__EIM_D25 IOMUX_PAD(0x414, 0x080, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D25__KEY_COL6 IOMUX_PAD(0x414, 0x080, 1, 0x9c8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D25__UART2_CTS IOMUX_PAD(0x414, 0x080, 4, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D25__USBOTG_DATA1 IOMUX_PAD(0x414, 0x080, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D25__GPT_CMPOUT1 IOMUX_PAD(0x414, 0x080, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D26__EIM_D26 IOMUX_PAD(0x418, 0x084, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D26__KEY_COL7 IOMUX_PAD(0x418, 0x084, 1, 0x9cc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D26__UART2_RTS IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, 3, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D26__USBOTG_DATA2 IOMUX_PAD(0x418, 0x084, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D26__GPT_CMPOUT2 IOMUX_PAD(0x418, 0x084, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D27__AUD6_RXC IOMUX_PAD(0x41c, 0x088, 5, 0x8f4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D27__EIM_D27 IOMUX_PAD(0x41c, 0x088, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D27__GPIO2_9 IOMUX_PAD(0x41c, 0x088, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D27__I2C2_SCL IOMUX_PAD(0x41c, 0x088, 0x14, 0x9b8, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, 3, 0x9f0, 3, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D27__USBOTG_DATA3 IOMUX_PAD(0x41c, 0x088, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D28__AUD6_TXD IOMUX_PAD(0x420, 0x08c, 5, 0x8f0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D28__KEY_ROW4 IOMUX_PAD(0x420, 0x08c, 1, 0x9d0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D28__USBOTG_DATA4 IOMUX_PAD(0x420, 0x08c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__AUD6_RXD IOMUX_PAD(0x424, 0x090, 5, 0x8ec, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__KEY_ROW5 IOMUX_PAD(0x424, 0x090, 1, 0x9d4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__USBOTG_DATA5 IOMUX_PAD(0x424, 0x090, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__AUD6_TXC IOMUX_PAD(0x428, 0x094, 5, 0x8fc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__KEY_ROW6 IOMUX_PAD(0x428, 0x094, 1, 0x9d8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__USBOTG_DATA6 IOMUX_PAD(0x428, 0x094, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__AUD6_TXFS IOMUX_PAD(0x42c, 0x098, 5, 0x900, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x098, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__KEY_ROW7 IOMUX_PAD(0x42c, 0x098, 1, 0x9dc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__USBOTG_DATA7 IOMUX_PAD(0x42c, 0x098, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A16__EIM_A16 IOMUX_PAD(0x430, 0x09c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A16__GPIO2_10 IOMUX_PAD(0x430, 0x09c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0 IOMUX_PAD(0x430, 0x09c, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A17__EIM_A17 IOMUX_PAD(0x434, 0x0a0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A17__GPIO2_11 IOMUX_PAD(0x434, 0x0a0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1 IOMUX_PAD(0x434, 0x0a0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A18__BOOT_LPB0 IOMUX_PAD(0x438, 0x0a4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A18__EIM_A18 IOMUX_PAD(0x438, 0x0a4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A18__GPIO2_12 IOMUX_PAD(0x438, 0x0a4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A19__BOOT_LPB1 IOMUX_PAD(0x43c, 0x0a8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A19__EIM_A19 IOMUX_PAD(0x43c, 0x0a8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A19__GPIO2_13 IOMUX_PAD(0x43c, 0x0a8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A20__BOOT_UART_SRC0 IOMUX_PAD(0x440, 0x0ac, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A20__EIM_A20 IOMUX_PAD(0x440, 0x0ac, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A20__GPIO2_14 IOMUX_PAD(0x440, 0x0ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A21__BOOT_UART_SRC1 IOMUX_PAD(0x444, 0x0b0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A21__EIM_A21 IOMUX_PAD(0x444, 0x0b0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A21__GPIO2_15 IOMUX_PAD(0x444, 0x0b0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A22__EIM_A22 IOMUX_PAD(0x448, 0x0b4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x448, 0x0b4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A23__BOOT_HPN_EN IOMUX_PAD(0x44c, 0x0b8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A23__EIM_A23 IOMUX_PAD(0x44c, 0x0b8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A23__GPIO2_17 IOMUX_PAD(0x44c, 0x0b8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A24__EIM_A24 IOMUX_PAD(0x450, 0x0bc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A24__GPIO2_18 IOMUX_PAD(0x450, 0x0bc, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A24__USBH2_CLK IOMUX_PAD(0x450, 0x0bc, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__DISP1_PIN4 IOMUX_PAD(0x454, 0x0c0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__EIM_A25 IOMUX_PAD(0x454, 0x0c0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__GPIO2_19 IOMUX_PAD(0x454, 0x0c0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__USBH2_DIR IOMUX_PAD(0x454, 0x0c0, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__CSI1_DATA_EN IOMUX_PAD(0x458, 0x0c4, 5, 0x9a0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__DISP2_EXT_CLK IOMUX_PAD(0x458, 0x0c4, 6, 0x908, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__EIM_A26 IOMUX_PAD(0x458, 0x0c4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__GPIO2_20 IOMUX_PAD(0x458, 0x0c4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__USBH2_STP IOMUX_PAD(0x458, 0x0c4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__CSI2_DATA_EN IOMUX_PAD(0x45c, 0x0c8, 5, 0x99c, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__DISP1_PIN1 IOMUX_PAD(0x45c, 0x0c8, 6, 0x9a4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__EIM_A27 IOMUX_PAD(0x45c, 0x0c8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__GPIO2_21 IOMUX_PAD(0x45c, 0x0c8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__USBH2_NXT IOMUX_PAD(0x45c, 0x0c8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__AUD5_RXFS IOMUX_PAD(0x468, 0x0d4, 6, 0x8e0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__CSI1_D2 IOMUX_PAD(0x468, 0x0d4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__EIM_EB2 IOMUX_PAD(0x468, 0x0d4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__FEC_MDIO (IOMUX_PAD(0x468, 0x0d4, 3, 0x954, 0, 0) | \
- MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | PAD_CTL_PKE | PAD_CTL_SRE_FAST | \
- PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS))
-#define MX51_PAD_EIM_EB2__GPIO2_22 IOMUX_PAD(0x468, 0x0d4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__GPT_CMPOUT1 IOMUX_PAD(0x468, 0x0d4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__AUD5_RXC IOMUX_PAD(0x46c, 0x0d8, 6, 0x8dc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__CSI1_D3 IOMUX_PAD(0x46c, 0x0d8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__EIM_EB3 IOMUX_PAD(0x46c, 0x0d8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__FEC_RDATA1 IOMUX_PAD(0x46c, 0x0d8, 3, 0x95c, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__GPIO2_23 IOMUX_PAD(0x46c, 0x0d8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__GPT_CMPOUT2 IOMUX_PAD(0x46c, 0x0d8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_OE__EIM_OE IOMUX_PAD(0x470, 0x0dc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_OE__GPIO2_24 IOMUX_PAD(0x470, 0x0dc, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS0__EIM_CS0 IOMUX_PAD(0x474, 0x0e0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS0__GPIO2_25 IOMUX_PAD(0x474, 0x0e0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS1__EIM_CS1 IOMUX_PAD(0x478, 0x0e4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS1__GPIO2_26 IOMUX_PAD(0x478, 0x0e4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__AUD5_TXD IOMUX_PAD(0x47c, 0x0e8, 6, 0x8d8, 1, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__CSI1_D4 IOMUX_PAD(0x47c, 0x0e8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__EIM_CS2 IOMUX_PAD(0x47c, 0x0e8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__FEC_RDATA2 IOMUX_PAD(0x47c, 0x0e8, 3, 0x960, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__GPIO2_27 IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__USBOTG_STP IOMUX_PAD(0x47c, 0x0e8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__AUD5_RXD IOMUX_PAD(0x480, 0x0ec, 6, 0x8d4, 1, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__CSI1_D5 IOMUX_PAD(0x480, 0x0ec, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__EIM_CS3 IOMUX_PAD(0x480, 0x0ec, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__FEC_RDATA3 IOMUX_PAD(0x480, 0x0ec, 3, 0x964, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__GPIO2_28 IOMUX_PAD(0x480, 0x0ec, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__USBOTG_NXT IOMUX_PAD(0x480, 0x0ec, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__AUD5_TXC IOMUX_PAD(0x484, 0x0f0, 6, 0x8e4, 1, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__CSI1_D6 IOMUX_PAD(0x484, 0x0f0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__EIM_CS4 IOMUX_PAD(0x484, 0x0f0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0x0f0, 3, 0x970, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_CS4__GPIO2_29 IOMUX_PAD(0x484, 0x0f0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__USBOTG_CLK IOMUX_PAD(0x484, 0x0f0, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__AUD5_TXFS IOMUX_PAD(0x488, 0x0f4, 6, 0x8e8, 1, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__CSI1_D7 IOMUX_PAD(0x488, 0x0f4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK IOMUX_PAD(0x488, 0x0f4, 4, 0x904, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__EIM_CS5 IOMUX_PAD(0x488, 0x0f4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0x0f4, 3, 0x950, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_CS5__GPIO2_30 IOMUX_PAD(0x488, 0x0f4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__USBOTG_DIR IOMUX_PAD(0x488, 0x0f4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DTACK__EIM_DTACK IOMUX_PAD(0x48c, 0x0f8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DTACK__GPIO2_31 IOMUX_PAD(0x48c, 0x0f8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_LBA__EIM_LBA IOMUX_PAD(0x494, 0x0fc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_LBA__GPIO3_1 IOMUX_PAD(0x494, 0x0fc, 1, 0x978, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CRE__EIM_CRE IOMUX_PAD(0x4a0, 0x100, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CRE__GPIO3_2 IOMUX_PAD(0x4a0, 0x100, 1, 0x97c, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4d0, 0x104, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DRAM_CS1__CCM_CLKO IOMUX_PAD(0x4d0, 0x104, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__GPIO3_3 IOMUX_PAD(0x4e4, 0x108, 3, 0x980, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__NANDF_WE_B IOMUX_PAD(0x4e4, 0x108, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__PATA_DIOW IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__SD3_DATA0 IOMUX_PAD(0x4e4, 0x108, 2, 0x93c, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__GPIO3_4 IOMUX_PAD(0x4e8, 0x10c, 3, 0x984, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__NANDF_RE_B IOMUX_PAD(0x4e8, 0x10c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__PATA_DIOR IOMUX_PAD(0x4e8, 0x10c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__SD3_DATA1 IOMUX_PAD(0x4e8, 0x10c, 2, 0x940, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_ALE__GPIO3_5 IOMUX_PAD(0x4ec, 0x110, 3, 0x988, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_ALE__NANDF_ALE IOMUX_PAD(0x4ec, 0x110, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN IOMUX_PAD(0x4ec, 0x110, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CLE__GPIO3_6 IOMUX_PAD(0x4f0, 0x114, 3, 0x98c, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CLE__NANDF_CLE IOMUX_PAD(0x4f0, 0x114, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CLE__PATA_RESET_B IOMUX_PAD(0x4f0, 0x114, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__GPIO3_7 IOMUX_PAD(0x4f4, 0x118, 3, 0x990, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__NANDF_WP_B IOMUX_PAD(0x4f4, 0x118, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__PATA_DMACK IOMUX_PAD(0x4f4, 0x118, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__SD3_DATA2 IOMUX_PAD(0x4f4, 0x118, 2, 0x944, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__ECSPI2_SS1 IOMUX_PAD(0x4f8, 0x11c, 5, 0x930, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__GPIO3_8 IOMUX_PAD(0x4f8, 0x11c, 3, 0x994, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__NANDF_RB0 IOMUX_PAD(0x4f8, 0x11c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__PATA_DMARQ IOMUX_PAD(0x4f8, 0x11c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__SD3_DATA3 IOMUX_PAD(0x4f8, 0x11c, 2, 0x948, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__CSPI_MOSI IOMUX_PAD(0x4fc, 0x120, 6, 0x91c, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__ECSPI2_RDY IOMUX_PAD(0x4fc, 0x120, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__GPIO3_9 IOMUX_PAD(0x4fc, 0x120, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__NANDF_RB1 IOMUX_PAD(0x4fc, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__PATA_IORDY IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__GPT_CMPOUT2 IOMUX_PAD(0x4fc, 0x120, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__DISP2_WAIT IOMUX_PAD(0x500, 0x124, 5, 0x9a8, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_NANDF_RB2__GPIO3_10 IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__GPT_CMPOUT3 IOMUX_PAD(0x500, 0x124, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 0x17, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__USBH3_NXT IOMUX_PAD(0x500, 0x124, 6, 0xa20, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__DISP1_WAIT IOMUX_PAD(0x504, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__FEC_RX_CLK IOMUX_PAD(0x504, 0x128, 1, 0x968, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_NANDF_RB3__GPIO3_11 IOMUX_PAD(0x504, 0x128, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__USBH3_CLK IOMUX_PAD(0x504, 0x128, 6, 0x9f8, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__USBH3_H3_DM IOMUX_PAD(0x504, 0x128, 0x17, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_NAND__GPIO_NAND IOMUX_PAD(0x514, 0x12c, 0, 0x998, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_NAND__PATA_INTRQ IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS0__GPIO3_16 IOMUX_PAD(0x518, 0x130, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS0__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS1__GPIO3_17 IOMUX_PAD(0x51c, 0x134, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS1__NANDF_CS1 IOMUX_PAD(0x51c, 0x134, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__CSPI_SCLK IOMUX_PAD(0x520, 0x138, 6, 0x914, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS2__GPIO3_18 IOMUX_PAD(0x520, 0x138, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__PATA_CS_0 IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__SD4_CLK IOMUX_PAD(0x520, 0x138, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_NANDF_CS2__USBH3_H1_DP IOMUX_PAD(0x520, 0x138, 0x17, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13c, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS3__GPIO3_19 IOMUX_PAD(0x524, 0x13c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__NANDF_CS3 IOMUX_PAD(0x524, 0x13c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__PATA_CS_1 IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__SD4_DAT0 IOMUX_PAD(0x524, 0x13c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__USBH3_H1_DM IOMUX_PAD(0x524, 0x13c, 0x17, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__FEC_TDATA1 IOMUX_PAD(0x528, 0x140, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS4__GPIO3_20 IOMUX_PAD(0x528, 0x140, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__PATA_DA_0 IOMUX_PAD(0x528, 0x140, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__SD4_DAT1 IOMUX_PAD(0x528, 0x140, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__USBH3_STP IOMUX_PAD(0x528, 0x140, 7, 0xa24, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__FEC_TDATA2 IOMUX_PAD(0x52c, 0x144, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS5__GPIO3_21 IOMUX_PAD(0x52c, 0x144, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__NANDF_CS5 IOMUX_PAD(0x52c, 0x144, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__PATA_DA_1 IOMUX_PAD(0x52c, 0x144, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__SD4_DAT2 IOMUX_PAD(0x52c, 0x144, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__USBH3_DIR IOMUX_PAD(0x52c, 0x144, 7, 0xa1c, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__CSPI_SS3 IOMUX_PAD(0x530, 0x148, 7, 0x928, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__FEC_TDATA3 IOMUX_PAD(0x530, 0x148, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS6__GPIO3_22 IOMUX_PAD(0x530, 0x148, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__PATA_DA_2 IOMUX_PAD(0x530, 0x148, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__SD4_DAT3 IOMUX_PAD(0x530, 0x148, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14c, 1, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS7__GPIO3_23 IOMUX_PAD(0x534, 0x14c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS7__NANDF_CS7 IOMUX_PAD(0x534, 0x14c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS7__SD3_CLK IOMUX_PAD(0x534, 0x14c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 IOMUX_PAD(0x538, 0x150, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_PAD_CTRL_4)
-#define MX51_PAD_NANDF_RDY_INT__GPIO3_24 IOMUX_PAD(0x538, 0x150, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 0, 0x938, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__SD3_CMD IOMUX_PAD(0x538, 0x150, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53c, 0x154, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__GPIO3_25 IOMUX_PAD(0x53c, 0x154, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__NANDF_D15 IOMUX_PAD(0x53c, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__PATA_DATA15 IOMUX_PAD(0x53c, 0x154, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__SD3_DAT7 IOMUX_PAD(0x53c, 0x154, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__ECSPI2_SS3 IOMUX_PAD(0x540, 0x158, 2, 0x934, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__GPIO3_26 IOMUX_PAD(0x540, 0x158, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__NANDF_D14 IOMUX_PAD(0x540, 0x158, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__PATA_DATA14 IOMUX_PAD(0x540, 0x158, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__SD3_DAT6 IOMUX_PAD(0x540, 0x158, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__ECSPI2_SS2 IOMUX_PAD(0x544, 0x15c, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__GPIO3_27 IOMUX_PAD(0x544, 0x15c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__NANDF_D13 IOMUX_PAD(0x544, 0x15c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__PATA_DATA13 IOMUX_PAD(0x544, 0x15c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__SD3_DAT5 IOMUX_PAD(0x544, 0x15c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__ECSPI2_SS1 IOMUX_PAD(0x548, 0x160, 2, 0x930, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__GPIO3_28 IOMUX_PAD(0x548, 0x160, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__NANDF_D12 IOMUX_PAD(0x548, 0x160, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__PATA_DATA12 IOMUX_PAD(0x548, 0x160, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__SD3_DAT4 IOMUX_PAD(0x548, 0x160, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__FEC_RX_DV IOMUX_PAD(0x54c, 0x164, 2, 0x96c, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__GPIO3_29 IOMUX_PAD(0x54c, 0x164, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__NANDF_D11 IOMUX_PAD(0x54c, 0x164, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__PATA_DATA11 IOMUX_PAD(0x54c, 0x164, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__SD3_DATA3 IOMUX_PAD(0x54c, 0x164, 5, 0x948, 1, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__GPIO3_30 IOMUX_PAD(0x550, 0x168, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__NANDF_D10 IOMUX_PAD(0x550, 0x168, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__PATA_DATA10 IOMUX_PAD(0x550, 0x168, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__SD3_DATA2 IOMUX_PAD(0x550, 0x168, 5, 0x944, 1, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__FEC_RDATA0 IOMUX_PAD(0x554, 0x16c, 0x12, 0x958, 0, MX51_PAD_CTRL_4)
-#define MX51_PAD_NANDF_D9__GPIO3_31 IOMUX_PAD(0x554, 0x16c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__NANDF_D9 IOMUX_PAD(0x554, 0x16c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__PATA_DATA9 IOMUX_PAD(0x554, 0x16c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__SD3_DATA1 IOMUX_PAD(0x554, 0x16c, 5, 0x940, 1, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__FEC_TDATA0 IOMUX_PAD(0x558, 0x170, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_D8__GPIO4_0 IOMUX_PAD(0x558, 0x170, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__NANDF_D8 IOMUX_PAD(0x558, 0x170, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__PATA_DATA8 IOMUX_PAD(0x558, 0x170, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__SD3_DATA0 IOMUX_PAD(0x558, 0x170, 5, 0x93c, 1, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__GPIO4_1 IOMUX_PAD(0x55c, 0x174, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__NANDF_D7 IOMUX_PAD(0x55c, 0x174, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__PATA_DATA7 IOMUX_PAD(0x55c, 0x174, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__USBH3_DATA0 IOMUX_PAD(0x55c, 0x174, 5, 0x9fc, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__GPIO4_2 IOMUX_PAD(0x560, 0x178, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__NANDF_D6 IOMUX_PAD(0x560, 0x178, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__PATA_DATA6 IOMUX_PAD(0x560, 0x178, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__SD4_LCTL IOMUX_PAD(0x560, 0x178, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__USBH3_DATA1 IOMUX_PAD(0x560, 0x178, 5, 0xa00, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__GPIO4_3 IOMUX_PAD(0x564, 0x17c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__NANDF_D5 IOMUX_PAD(0x564, 0x17c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__PATA_DATA5 IOMUX_PAD(0x564, 0x17c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__SD4_WP IOMUX_PAD(0x564, 0x17c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__USBH3_DATA2 IOMUX_PAD(0x564, 0x17c, 5, 0xa04, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__GPIO4_4 IOMUX_PAD(0x568, 0x180, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__PATA_DATA4 IOMUX_PAD(0x568, 0x180, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__SD4_CD IOMUX_PAD(0x568, 0x180, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__USBH3_DATA3 IOMUX_PAD(0x568, 0x180, 5, 0xa08, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__GPIO4_5 IOMUX_PAD(0x56c, 0x184, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__NANDF_D3 IOMUX_PAD(0x56c, 0x184, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__PATA_DATA3 IOMUX_PAD(0x56c, 0x184, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__SD4_DAT4 IOMUX_PAD(0x56c, 0x184, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__USBH3_DATA4 IOMUX_PAD(0x56c, 0x184, 5, 0xa0c, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__GPIO4_6 IOMUX_PAD(0x570, 0x188, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__NANDF_D2 IOMUX_PAD(0x570, 0x188, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__PATA_DATA2 IOMUX_PAD(0x570, 0x188, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__SD4_DAT5 IOMUX_PAD(0x570, 0x188, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__USBH3_DATA5 IOMUX_PAD(0x570, 0x188, 5, 0xa10, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__GPIO4_7 IOMUX_PAD(0x574, 0x18c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__NANDF_D1 IOMUX_PAD(0x574, 0x18c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__PATA_DATA1 IOMUX_PAD(0x574, 0x18c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__SD4_DAT6 IOMUX_PAD(0x574, 0x18c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__USBH3_DATA6 IOMUX_PAD(0x574, 0x18c, 5, 0xa14, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__GPIO4_8 IOMUX_PAD(0x578, 0x190, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__NANDF_D0 IOMUX_PAD(0x578, 0x190, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__PATA_DATA0 IOMUX_PAD(0x578, 0x190, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__SD4_DAT7 IOMUX_PAD(0x578, 0x190, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__USBH3_DATA7 IOMUX_PAD(0x578, 0x190, 5, 0xa18, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D8__CSI1_D8 IOMUX_PAD(0x57c, 0x194, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D8__GPIO3_12 IOMUX_PAD(0x57c, 0x194, 3, 0x998, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI1_D9__CSI1_D9 IOMUX_PAD(0x580, 0x198, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D9__GPIO3_13 IOMUX_PAD(0x580, 0x198, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1a0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58c, 0x1a4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1a8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1ac, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1b0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59c, 0x1b4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5a0, 0x1b8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5a4, 0x1bc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5a8, 0x1c0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5ac, 0x1c4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_VSYNC__GPIO3_14 IOMUX_PAD(0x5ac, 0x1c4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5b0, 0x1c8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_HSYNC__GPIO3_15 IOMUX_PAD(0x5b0, 0x1c8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5b4, __NA_, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5b8, __NA_, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D12__CSI2_D12 IOMUX_PAD(0x5bc, 0x1cc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D12__GPIO4_9 IOMUX_PAD(0x5bc, 0x1cc, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_D13__CSI2_D13 IOMUX_PAD(0x5c0, 0x1d0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D13__GPIO4_10 IOMUX_PAD(0x5c0, 0x1d0, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_D14__CSI2_D14 IOMUX_PAD(0x5c4, 0x1d4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D15__CSI2_D15 IOMUX_PAD(0x5c8, 0x1d8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D16__CSI2_D16 IOMUX_PAD(0x5cc, 0x1dc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D17__CSI2_D17 IOMUX_PAD(0x5d0, 0x1e0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D18__CSI2_D18 IOMUX_PAD(0x5d4, 0x1e4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D18__GPIO4_11 IOMUX_PAD(0x5d4, 0x1e4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_D19__CSI2_D19 IOMUX_PAD(0x5d8, 0x1e8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D19__GPIO4_12 IOMUX_PAD(0x5d8, 0x1e8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC IOMUX_PAD(0x5dc, 0x1ec, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_VSYNC__GPIO4_13 IOMUX_PAD(0x5dc, 0x1ec, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC IOMUX_PAD(0x5e0, 0x1f0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_HSYNC__GPIO4_14 IOMUX_PAD(0x5e0, 0x1f0, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK IOMUX_PAD(0x5e4, 0x1f4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_PIXCLK__GPIO4_15 IOMUX_PAD(0x5e4, 0x1f4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_I2C1_CLK__GPIO4_16 IOMUX_PAD(0x5e8, 0x1f8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x5e8, 0x1f8, 0x10, __NA_, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_I2C1_DAT__GPIO4_17 IOMUX_PAD(0x5ec, 0x1fc, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x5ec, 0x1fc, 0x10, __NA_, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD IOMUX_PAD(0x5f0, 0x200, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_TXD__GPIO4_18 IOMUX_PAD(0x5f0, 0x200, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD IOMUX_PAD(0x5f4, 0x204, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_RXD__GPIO4_19 IOMUX_PAD(0x5f4, 0x204, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_RXD__UART3_RXD IOMUX_PAD(0x5f4, 0x204, 1, 0x9f4, 2, MX51_UART_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_CK__AUD3_TXC IOMUX_PAD(0x5f8, 0x208, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_CK__GPIO4_20 IOMUX_PAD(0x5f8, 0x208, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS IOMUX_PAD(0x5fc, 0x20c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_FS__GPIO4_21 IOMUX_PAD(0x5fc, 0x20c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_FS__UART3_TXD IOMUX_PAD(0x5fc, 0x20c, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x600, 0x210, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_MOSI__GPIO4_22 IOMUX_PAD(0x600, 0x210, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_MOSI__I2C1_SDA IOMUX_PAD(0x600, 0x210, 0x11, 0x9b4, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_CSPI1_MISO__AUD4_RXD IOMUX_PAD(0x604, 0x214, 1, 0x8c4, 1, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x604, 0x214, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_MISO__GPIO4_23 IOMUX_PAD(0x604, 0x214, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS0__AUD4_TXC IOMUX_PAD(0x608, 0x218, 1, 0x8cc, 1, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS0__GPIO4_24 IOMUX_PAD(0x608, 0x218, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS1__AUD4_TXD IOMUX_PAD(0x60c, 0x21c, 1, 0x8c8, 1, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 IOMUX_PAD(0x60c, 0x21c, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS1__GPIO4_25 IOMUX_PAD(0x60c, 0x21c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_RDY__AUD4_TXFS IOMUX_PAD(0x610, 0x220, 1, 0x8d0, 1, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY IOMUX_PAD(0x610, 0x220, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_RDY__GPIO4_26 IOMUX_PAD(0x610, 0x220, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x614, 0x224, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SCLK__GPIO4_27 IOMUX_PAD(0x614, 0x224, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SCLK__I2C1_SCL IOMUX_PAD(0x614, 0x224, 0x11, 0x9b0, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_UART1_RXD__GPIO4_28 IOMUX_PAD(0x618, 0x228, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART1_TXD__GPIO4_29 IOMUX_PAD(0x61c, 0x22c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART1_TXD__PWM2_PWMO IOMUX_PAD(0x61c, 0x22c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61c, 0x22c, 0, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART1_RTS__GPIO4_30 IOMUX_PAD(0x620, 0x230, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART1_CTS__GPIO4_31 IOMUX_PAD(0x624, 0x234, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, 0, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART2_RXD__FIRI_TXD IOMUX_PAD(0x628, 0x238, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART2_RXD__GPIO1_20 IOMUX_PAD(0x628, 0x238, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, 0, 0x9ec, 2, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__FIRI_RXD IOMUX_PAD(0x62c, 0x23c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__GPIO1_21 IOMUX_PAD(0x62c, 0x23c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62c, 0x23c, 0, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__CSI1_D0 IOMUX_PAD(0x630, 0x240, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__GPIO1_22 IOMUX_PAD(0x630, 0x240, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__UART1_DTR IOMUX_PAD(0x630, 0x240, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x630, 0x240, 1, 0x9f4, 4, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__CSI1_D1 IOMUX_PAD(0x634, 0x244, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__GPIO1_23 IOMUX_PAD(0x634, 0x244, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__UART1_DSR IOMUX_PAD(0x634, 0x244, 0, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x634, 0x244, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_OWIRE_LINE__GPIO1_24 IOMUX_PAD(0x638, 0x248, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_OWIRE_LINE__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_OWIRE_LINE__SPDIF_OUT IOMUX_PAD(0x638, 0x248, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63c, 0x24c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64c, 0x25c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL0__PLL1_BYP IOMUX_PAD(0x64c, 0x25c, 7, 0x90c, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL1__PLL2_BYP IOMUX_PAD(0x650, 0x260, 7, 0x910, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL2__PLL3_BYP IOMUX_PAD(0x654, 0x264, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__I2C2_SCL IOMUX_PAD(0x65c, 0x26c, 0x13, 0x9b8, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65c, 0x26c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__SPDIF_OUT1 IOMUX_PAD(0x65c, 0x26c, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__UART1_RI IOMUX_PAD(0x65c, 0x26c, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__UART3_RTS IOMUX_PAD(0x65c, 0x26c, 2, 0x9f0, 4, MX51_UART_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__I2C2_SDA IOMUX_PAD(0x660, 0x270, 0x13, 0x9bc, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__UART1_DCD IOMUX_PAD(0x660, 0x270, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__UART3_CTS IOMUX_PAD(0x660, 0x270, 2, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__CSPI_SCLK IOMUX_PAD(0x678, 0x278, 1, 0x914, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__GPIO1_25 IOMUX_PAD(0x678, 0x278, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__I2C2_SCL IOMUX_PAD(0x678, 0x278, 0x15, 0x9b8, 2, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__CSPI_MOSI IOMUX_PAD(0x67c, 0x27c, 1, 0x91c, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__GPIO1_26 IOMUX_PAD(0x67c, 0x27c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__I2C2_SDA IOMUX_PAD(0x67c, 0x27c, 0x15, 0x9bc, 2, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67c, 0x27c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__CSPI_RDY IOMUX_PAD(0x680, 0x280, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__GPIO1_27 IOMUX_PAD(0x680, 0x280, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__UART3_RXD IOMUX_PAD(0x680, 0x280, 5, 0x9f4, 6, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__CSPI_MISO IOMUX_PAD(0x684, 0x284, 1, 0x918, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__GPIO1_28 IOMUX_PAD(0x684, 0x284, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__UART3_TXD IOMUX_PAD(0x684, 0x284, 5, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__GPIO1_11 IOMUX_PAD(0x688, 0x288, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__UART2_CTS IOMUX_PAD(0x688, 0x288, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__GPIO1_12 IOMUX_PAD(0x68c, 0x28c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__UART2_RXD IOMUX_PAD(0x68c, 0x28c, 1, 0x9ec, 4, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68c, 0x28c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__GPIO1_13 IOMUX_PAD(0x690, 0x290, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__UART2_TXD IOMUX_PAD(0x690, 0x290, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__GPIO1_14 IOMUX_PAD(0x694, 0x294, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__UART2_RTS IOMUX_PAD(0x694, 0x294, 1, 0x9e8, 5, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__CSPI_SS0 IOMUX_PAD(0x698, 0x298, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__GPIO1_15 IOMUX_PAD(0x698, 0x298, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__CSPI_SS1 IOMUX_PAD(0x69c, 0x29c, 1, 0x920, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__GPIO1_16 IOMUX_PAD(0x69c, 0x29c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69c, 0x29c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__CSPI_SS3 IOMUX_PAD(0x6a0, 0x2a0, 1, 0x928, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__GPIO1_17 IOMUX_PAD(0x6a0, 0x2a0, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6a0, 0x2a0, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3 IOMUX_PAD(0x6a4, 0x2a4, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3 IOMUX_PAD(0x6a4, 0x2a4, 5, 0x934, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__GPIO1_18 IOMUX_PAD(0x6a4, 0x2a4, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6a4, 0x2a4, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_DI1_PIN11__DI1_PIN11 IOMUX_PAD(0x6a8, 0x2a8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN11__ECSPI1_SS2 IOMUX_PAD(0x6a8, 0x2a8, 7, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_DI1_PIN11__GPIO3_0 IOMUX_PAD(0x6a8, 0x2a8, 4, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN12__DI1_PIN12 IOMUX_PAD(0x6ac, 0x2ac, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN12__GPIO3_1 IOMUX_PAD(0x6ac, 0x2ac, 4, 0x978, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN13__DI1_PIN13 IOMUX_PAD(0x6b0, 0x2b0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN13__GPIO3_2 IOMUX_PAD(0x6b0, 0x2b0, 4, 0x97c, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DI1_D0_CS__DI1_D0_CS IOMUX_PAD(0x6b4, 0x2b4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D0_CS__GPIO3_3 IOMUX_PAD(0x6b4, 0x2b4, 4, 0x980, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__DI1_D1_CS IOMUX_PAD(0x6b8, 0x2b8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN14 IOMUX_PAD(0x6b8, 0x2b8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN5 IOMUX_PAD(0x6b8, 0x2b8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__GPIO3_4 IOMUX_PAD(0x6b8, 0x2b8, 4, 0x984, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 IOMUX_PAD(0x6bc, 0x2bc, 2, 0x9a4, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN IOMUX_PAD(0x6bc, 0x2bc, 0, 0x9c4, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5 IOMUX_PAD(0x6bc, 0x2bc, 4, 0x988, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 IOMUX_PAD(0x6c0, 0x2c0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO IOMUX_PAD(0x6c0, 0x2c0, 0, 0x9c4, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6 IOMUX_PAD(0x6c0, 0x2c0, 4, 0x98c, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 IOMUX_PAD(0x6c4, 0x2c4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 IOMUX_PAD(0x6c4, 0x2c4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK IOMUX_PAD(0x6c4, 0x2c4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7 IOMUX_PAD(0x6c4, 0x2c4, 4, 0x990, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK IOMUX_PAD(0x6c8, 0x2c8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 IOMUX_PAD(0x6c8, 0x2c8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 IOMUX_PAD(0x6c8, 0x2c8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__GPIO3_8 IOMUX_PAD(0x6c8, 0x2c8, 4, 0x994, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6cc, 0x2cc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6d0, 0x2d0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6d4, 0x2d4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6d8, 0x2d8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6dc, 0x2dc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6e0, 0x2e0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC IOMUX_PAD(0x6e4, 0x2e4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6e4, 0x2e4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG IOMUX_PAD(0x6e8, 0x2e8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6e8, 0x2e8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT8__BOOT_SRC0 IOMUX_PAD(0x6ec, 0x2ec, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6ec, 0x2ec, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT9__BOOT_SRC1 IOMUX_PAD(0x6f0, 0x2f0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6f0, 0x2f0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE IOMUX_PAD(0x6f4, 0x2f4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6f4, 0x2f4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 IOMUX_PAD(0x6f8, 0x2f8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6f8, 0x2f8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL IOMUX_PAD(0x6fc, 0x2fc, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6fc, 0x2fc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 IOMUX_PAD(0x700, 0x300, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 IOMUX_PAD(0x704, 0x304, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH IOMUX_PAD(0x708, 0x308, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 IOMUX_PAD(0x70c, 0x30c, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70c, 0x30c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 IOMUX_PAD(0x710, 0x310, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 IOMUX_PAD(0x714, 0x314, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN11 IOMUX_PAD(0x714, 0x314, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN5 IOMUX_PAD(0x714, 0x314, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 IOMUX_PAD(0x718, 0x318, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN12 IOMUX_PAD(0x718, 0x318, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN6 IOMUX_PAD(0x718, 0x318, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 IOMUX_PAD(0x71c, 0x31c, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71c, 0x31c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN13 IOMUX_PAD(0x71c, 0x31c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN7 IOMUX_PAD(0x71c, 0x31c, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 IOMUX_PAD(0x720, 0x320, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN14 IOMUX_PAD(0x720, 0x320, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN8 IOMUX_PAD(0x720, 0x320, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 IOMUX_PAD(0x724, 0x324, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS IOMUX_PAD(0x724, 0x324, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP2_DAT16 IOMUX_PAD(0x724, 0x324, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 IOMUX_PAD(0x728, 0x328, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS IOMUX_PAD(0x728, 0x328, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP2_DAT17 IOMUX_PAD(0x728, 0x328, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS IOMUX_PAD(0x728, 0x328, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72c, 0x32c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_DISP_CLK__DI1_DISP_CLK IOMUX_PAD(0x730, __NA_, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN15__DI1_PIN15 IOMUX_PAD(0x738, __NA_, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP2__DISP1_SER_CLK IOMUX_PAD(0x740, 0x338, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP2__DISP2_WAIT IOMUX_PAD(0x740, 0x338, 2, 0x9a8, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__CSI1_DATA_EN IOMUX_PAD(0x744, 0x33c, 3, 0x9a0, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__DISP1_SER_DIO IOMUX_PAD(0x744, 0x33c, 0, 0x9c0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__FEC_TX_ER IOMUX_PAD(0x744, 0x33c, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN IOMUX_PAD(0x748, 0x340, 3, 0x99c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN4__FEC_CRS IOMUX_PAD(0x748, 0x340, 2, 0x950, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74c, 0x344, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN2__FEC_MDC IOMUX_PAD(0x74c, 0x344, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN3__FEC_MDIO IOMUX_PAD(0x750, 0x348, 2, 0x954, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 IOMUX_PAD(0x754, 0x34c, 2, 0x95c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DI2_PIN15 IOMUX_PAD(0x758, 0x350, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DISP1_SER_DIN IOMUX_PAD(0x758, 0x350, 0, 0x9c0, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DISP2_PIN1 IOMUX_PAD(0x758, 0x350, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__FEC_RDATA2 IOMUX_PAD(0x758, 0x350, 2, 0x960, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75c, 0x354, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__FEC_RDATA3 IOMUX_PAD(0x75c, 0x354, 2, 0x964, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__KEY_COL6 IOMUX_PAD(0x75c, 0x354, 4, 0x9c8, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__UART3_RXD IOMUX_PAD(0x75c, 0x354, 5, 0x9f4, 8, MX51_UART_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__USBH3_CLK IOMUX_PAD(0x75c, 0x354, 3, 0x9f8, 1, MX51_UART_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__FEC_RX_ER IOMUX_PAD(0x760, 0x358, 2, 0x970, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__KEY_COL7 IOMUX_PAD(0x760, 0x358, 4, 0x9cc, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__UART3_TXD IOMUX_PAD(0x760, 0x358, 5, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__USBH3_DIR IOMUX_PAD(0x760, 0x358, 3, 0xa1c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76c, 0x364, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__DISP2_DAT6 IOMUX_PAD(0x774, 0x36c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__FEC_TDATA1 IOMUX_PAD(0x774, 0x36c, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT6__GPIO1_19 IOMUX_PAD(0x774, 0x36c, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__KEY_ROW4 IOMUX_PAD(0x774, 0x36c, 4, 0x9d0, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__USBH3_STP IOMUX_PAD(0x774, 0x36c, 3, 0xa24, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__FEC_TDATA2 IOMUX_PAD(0x778, 0x370, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT7__GPIO1_29 IOMUX_PAD(0x778, 0x370, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__KEY_ROW5 IOMUX_PAD(0x778, 0x370, 4, 0x9d4, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__USBH3_NXT IOMUX_PAD(0x778, 0x370, 3, 0xa20, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__DISP2_DAT8 IOMUX_PAD(0x77c, 0x374, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__FEC_TDATA3 IOMUX_PAD(0x77c, 0x374, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT8__GPIO1_30 IOMUX_PAD(0x77c, 0x374, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__KEY_ROW6 IOMUX_PAD(0x77c, 0x374, 4, 0x9d8, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__USBH3_DATA0 IOMUX_PAD(0x77c, 0x374, 3, 0x9fc, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__AUD6_RXC IOMUX_PAD(0x780, 0x378, 4, 0x8f4, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__FEC_TX_EN IOMUX_PAD(0x780, 0x378, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT9__GPIO1_31 IOMUX_PAD(0x780, 0x378, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__USBH3_DATA1 IOMUX_PAD(0x780, 0x378, 3, 0xa00, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS IOMUX_PAD(0x784, 0x37c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__FEC_COL IOMUX_PAD(0x784, 0x37c, 2, 0x94c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__KEY_ROW7 IOMUX_PAD(0x784, 0x37c, 4, 0x9dc, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__USBH3_DATA2 IOMUX_PAD(0x784, 0x37c, 3, 0xa04, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__AUD6_TXD IOMUX_PAD(0x788, 0x380, 4, 0x8f0, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK IOMUX_PAD(0x788, 0x380, 2, 0x968, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__GPIO1_10 IOMUX_PAD(0x788, 0x380, 7, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__USBH3_DATA3 IOMUX_PAD(0x788, 0x380, 3, 0xa08, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__AUD6_RXD IOMUX_PAD(0x78c, 0x384, 4, 0x8ec, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78c, 0x384, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__FEC_RX_DV IOMUX_PAD(0x78c, 0x384, 2, 0x96c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__USBH3_DATA4 IOMUX_PAD(0x78c, 0x384, 3, 0xa0c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__AUD6_TXC IOMUX_PAD(0x790, 0x388, 4, 0x8fc, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK IOMUX_PAD(0x790, 0x388, 2, 0x974, 1, MX51_PAD_CTRL_4)
-#define MX51_PAD_DISP2_DAT13__USBH3_DATA5 IOMUX_PAD(0x790, 0x388, 3, 0xa10, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__AUD6_TXFS IOMUX_PAD(0x794, 0x38c, 4, 0x900, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__FEC_RDATA0 IOMUX_PAD(0x794, 0x38c, 2, 0x958, 1, MX51_PAD_CTRL_4)
-#define MX51_PAD_DISP2_DAT14__USBH3_DATA6 IOMUX_PAD(0x794, 0x38c, 3, 0xa14, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__AUD6_RXFS IOMUX_PAD(0x798, 0x390, 4, 0x8f8, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS IOMUX_PAD(0x798, 0x390, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__FEC_TDATA0 IOMUX_PAD(0x798, 0x390, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT15__USBH3_DATA7 IOMUX_PAD(0x798, 0x390, 3, 0xa18, 1, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__AUD5_RXFS IOMUX_PAD(0x79c, 0x394, 1, 0x8e0, 1, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x79c, 0x394, 2, 0x91c, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79c, 0x394, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__AUD5_RXC IOMUX_PAD(0x7a0, 0x398, 1, 0x8dc, 1, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x7a0, 0x398, 2, 0x914, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7a0, 0x398, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_SD1_DATA0__AUD5_TXD IOMUX_PAD(0x7a4, 0x39c, 1, 0x8d8, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x7a4, 0x39c, 2, 0x918, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7a4, 0x39c, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(__NA_, 0x01c, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(__NA_, 0x020, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(__NA_, 0x024, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(__NA_, 0x028, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA1__AUD5_RXD IOMUX_PAD(0x7a8, 0x3a0, 1, 0x8d4, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7a8, 0x3a0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(__NA_, 0x02c, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(__NA_, 0x030, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(__NA_, 0x034, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(__NA_, 0x038, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA2__AUD5_TXC IOMUX_PAD(0x7ac, 0x3a4, 1, 0x8e4, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7ac, 0x3a4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(__NA_, 0x044, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(__NA_, 0x048, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(__NA_, 0x03c, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(__NA_, 0x040, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__AUD5_TXFS IOMUX_PAD(0x7b0, 0x3a8, 1, 0x8e8, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__CSPI_SS1 IOMUX_PAD(0x7b0, 0x3a8, 2, 0x920, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_GPIO1_0__CSPI_SS2 IOMUX_PAD(0x7b4, 0x3ac, 2, 0x924, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_0__SD1_CD IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-#define MX51_PAD_GPIO1_1__CSPI_MISO IOMUX_PAD(0x7b8, 0x3b0, 2, 0x918, 2, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_1__SD1_WP IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(__NA_, 0x04c, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(__NA_, 0x050, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(__NA_, 0x054, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(__NA_, 0x058, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x7bc, 0x3b4, 2, 0x91c, 3, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__I2C1_SCL IOMUX_PAD(0x7bc, 0x3b4, 0x11, 0x9b0, 2, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x7c0, 0x3b8, 2, 0x914, 3, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__I2C1_SDA IOMUX_PAD(0x7c0, 0x3b8, 0x11, 0x9b4, 2, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7c0, 0x3b8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x7c4, 0x3bc, 2, 0x918, 3, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA0__SD1_DAT4 IOMUX_PAD(0x7c4, 0x3bc, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7c4, 0x3bc, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__SD1_DAT5 IOMUX_PAD(0x7c8, 0x3c0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__USBH3_H2_DP IOMUX_PAD(0x7c8, 0x3c0, 0x12, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__SD1_DAT6 IOMUX_PAD(0x7cc, 0x3c4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__USBH3_H2_DM IOMUX_PAD(0x7cc, 0x3c4, 0x12, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x7d0, 0x3c8, 2, 0x924, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__SD1_DAT7 IOMUX_PAD(0x7d0, 0x3c8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__CCM_OUT_2 IOMUX_PAD(0x7d4, 0x3cc, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__GPIO1_2 IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__I2C2_SCL IOMUX_PAD(0x7d4, 0x3cc, 0x12, 0x9b8, 3, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__PLL1_BYP IOMUX_PAD(0x7d4, 0x3cc, 7, 0x90c, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__PWM1_PWMO IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__I2C2_SDA IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x9bc, 3, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__CCM_CLKO2 IOMUX_PAD(0x7d8, 0x3d0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__GPT_CLKIN IOMUX_PAD(0x7d8, 0x3d0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__PLL2_BYP IOMUX_PAD(0x7d8, 0x3d0, 7, 0x910, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__PWM2_PWMO IOMUX_PAD(0x7d8, 0x3d0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7fc, 0x3d4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B IOMUX_PAD(0x7fc, 0x3d4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK IOMUX_PAD(0x804, 0x3d8, 4, 0x908, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__EIM_RDY IOMUX_PAD(0x804, 0x3d8, 3, 0x938, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B IOMUX_PAD(0x804, 0x3d8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__GPT_CAPIN1 IOMUX_PAD(0x804, 0x3d8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__CSI2_MCLK IOMUX_PAD(0x808, 0x3dc, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__DISP2_PIN16 IOMUX_PAD(0x808, 0x3dc, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B IOMUX_PAD(0x808, 0x3dc, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__CCM_CLKO IOMUX_PAD(0x808, 0x3dc, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__DISP2_PIN17 IOMUX_PAD(0x80c, 0x3e0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__REF_EN_B IOMUX_PAD(0x80c, 0x3e0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__GPT_CAPIN2 IOMUX_PAD(0x80c, 0x3e0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__CCM_OUT_0 IOMUX_PAD(0x810, 0x3e4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__SD2_WP IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__SPDIF_OUT1 IOMUX_PAD(0x810, 0x3e4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__CSI2_DATA_EN IOMUX_PAD(0x814, 0x3e8, 2, 0x99c, 2, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__SD2_CD IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__USBH3_PWR IOMUX_PAD(0x814, 0x3e8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__CCM_CLKO2 IOMUX_PAD(0x814, 0x3e8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__CCM_OUT_1 IOMUX_PAD(0x818, 0x3ec, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__DISP2_D1_CS IOMUX_PAD(0x818, 0x3ec, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__DISP2_SER_CS IOMUX_PAD(0x818, 0x3ec, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__SD2_LCTL IOMUX_PAD(0x818, 0x3ec, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__USBH3_OC IOMUX_PAD(0x818, 0x3ec, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__CCM_CLKO IOMUX_PAD(0x818, 0x3ec, 4, __NA_, 0, NO_PAD_CTRL)
-
-#endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 39406b7..a7e9bd2 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -50,6 +50,7 @@
#include "common.h"
#include "devices-imx31.h"
#include "crmregs-imx3.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 75b7b6a..e6d4b99 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -36,6 +36,7 @@
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx27.h"
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 1ffa271..62a6e02 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -39,6 +39,7 @@
#include "common.h"
#include "devices-imx35.h"
+#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx35.h"
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index e978dda..b2ee6e0 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -35,6 +35,7 @@
#include "common.h"
#include "devices-imx25.h"
+#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx25.h"
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index b61bd8e..ede2bdb 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -43,6 +43,7 @@
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
deleted file mode 100644
index bb3ca04..0000000
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "common.h"
-#include "devices-imx27.h"
-#include "iomux-mx27.h"
-
-static const int mx27ipcam_pins[] __initconst = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
-};
-
-static void __init mx27ipcam_init(void)
-{
- imx27_soc_init();
-
- mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins),
- "mx27ipcam");
-
- imx27_add_imx_uart0(NULL);
- imx27_add_fec(NULL);
- imx27_add_imx2_wdt();
-}
-
-static void __init mx27ipcam_timer_init(void)
-{
- mx27_clocks_init(25000000);
-}
-
-MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
- /* maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_time = mx27ipcam_timer_init,
- .init_machine = mx27ipcam_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
deleted file mode 100644
index 9992089..0000000
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-static const int mx27lite_pins[] __initconst = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init mx27lite_init(void)
-{
- imx27_soc_init();
-
- mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
- "imx27lite");
- imx27_add_imx_uart0(&uart_pdata);
- imx27_add_fec(NULL);
-}
-
-static void __init mx27lite_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
- .atag_offset = 0x100,
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_time = mx27lite_timer_init,
- .init_machine = mx27lite_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c
index b899c0b..b1e56a9 100644
--- a/arch/arm/mach-imx/mach-imx50.c
+++ b/arch/arm/mach-imx/mach-imx50.c
@@ -23,14 +23,13 @@
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static const char *imx50_dt_board_compat[] __initconst = {
+static const char * const imx50_dt_board_compat[] __initconst = {
"fsl,imx50",
NULL
};
DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)")
- .map_io = mx53_map_io,
- .init_irq = mx53_init_irq,
+ .init_irq = tzic_init_irq,
.init_machine = imx50_dt_init,
.dt_compat = imx50_dt_board_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c
new file mode 100644
index 0000000..c77deb3
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx51.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "common.h"
+#include "hardware.h"
+
+static void __init imx51_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX51);
+}
+
+/*
+ * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
+ * the Freescale marketing division. However this did not remove the
+ * hardware from the chip which still needs to be configured for proper
+ * IPU support.
+ */
+#define MX51_MIPI_HSC_BASE 0x83fdc000
+static void __init imx51_ipu_mipi_setup(void)
+{
+ void __iomem *hsc_addr;
+
+ hsc_addr = ioremap(MX51_MIPI_HSC_BASE, SZ_16K);
+ WARN_ON(!hsc_addr);
+
+ /* setup MIPI module to legacy mode */
+ __raw_writel(0xf00, hsc_addr);
+
+ /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
+ __raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff,
+ hsc_addr + 0x800);
+
+ iounmap(hsc_addr);
+}
+
+static void __init imx51_dt_init(void)
+{
+ struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+
+ mxc_arch_reset_init_dt();
+ imx51_ipu_mipi_setup();
+ imx_src_init();
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ platform_device_register_full(&devinfo);
+}
+
+static void __init imx51_init_late(void)
+{
+ mx51_neon_fixup();
+ imx51_pm_init();
+}
+
+static const char * const imx51_dt_board_compat[] __initconst = {
+ "fsl,imx51",
+ NULL
+};
+
+DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
+ .init_early = imx51_init_early,
+ .init_irq = tzic_init_irq,
+ .init_machine = imx51_dt_init,
+ .init_late = imx51_init_late,
+ .dt_compat = imx51_dt_board_compat,
+ .restart = mxc_restart,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 2bad387..03dd6ea 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -22,24 +22,35 @@
#include "common.h"
#include "hardware.h"
-#include "mx53.h"
+
+static void __init imx53_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX53);
+}
static void __init imx53_dt_init(void)
{
mxc_arch_reset_init_dt();
+ imx_src_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ imx_aips_allow_unprivileged_access("fsl,imx53-aipstz");
}
-static const char *imx53_dt_board_compat[] __initconst = {
+static void __init imx53_init_late(void)
+{
+ imx53_pm_init();
+}
+
+static const char * const imx53_dt_board_compat[] __initconst = {
"fsl,imx53",
NULL
};
DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
- .map_io = mx53_map_io,
.init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
+ .init_irq = tzic_init_irq,
.init_machine = imx53_dt_init,
.init_late = imx53_init_late,
.dt_compat = imx53_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index e60456d..d51c6e9 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -320,7 +320,7 @@
val >>= OCOTP_CFG3_SPEED_SHIFT;
val &= 0x3;
- if (val != OCOTP_CFG3_SPEED_1P2GHZ)
+ if ((val != OCOTP_CFG3_SPEED_1P2GHZ) && cpu_is_imx6q())
if (dev_pm_opp_disable(cpu_dev, 1200000000))
pr_warn("failed to disable 1.2 GHz OPP\n");
if (val < OCOTP_CFG3_SPEED_996MHZ)
@@ -396,7 +396,7 @@
irqchip_init();
}
-static const char *imx6q_dt_compat[] __initconst = {
+static const char * const imx6q_dt_compat[] __initconst = {
"fsl,imx6dl",
"fsl,imx6q",
NULL,
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index ad32338..ed263a2 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -70,7 +70,7 @@
irqchip_init();
}
-static const char *imx6sl_dt_compat[] __initconst = {
+static const char * const imx6sl_dt_compat[] __initconst = {
"fsl,imx6sl",
NULL,
};
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
index 02fccf6..673a734 100644
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -12,6 +12,7 @@
#include <asm/mach/map.h>
#include "common.h"
+#include "cpuidle.h"
static void __init imx6sx_init_machine(void)
{
@@ -26,6 +27,7 @@
of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
imx_anatop_init();
+ imx6sx_pm_init();
}
static void __init imx6sx_init_irq(void)
@@ -37,7 +39,12 @@
irqchip_init();
}
-static const char *imx6sx_dt_compat[] __initconst = {
+static void __init imx6sx_init_late(void)
+{
+ imx6q_cpuidle_init();
+}
+
+static const char * const imx6sx_dt_compat[] __initconst = {
"fsl,imx6sx",
NULL,
};
@@ -47,5 +54,6 @@
.init_irq = imx6sx_init_irq,
.init_machine = imx6sx_init_machine,
.dt_compat = imx6sx_dt_compat,
+ .init_late = imx6sx_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index ea1fa19..0d01e36 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -39,6 +39,7 @@
#include "common.h"
#include "devices-imx25.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx25.h"
#include "mx25.h"
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 435a542..9ef4640 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -40,6 +40,7 @@
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 4217871..453f41a 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -40,6 +40,7 @@
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index eee042f..e9549a3 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -45,6 +45,7 @@
#include "board-mx31lilly.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index fa15d0b..57eac6f 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -42,6 +42,7 @@
#include "board-mx31lite.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 08730f2..bb6f8a5 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -47,6 +47,7 @@
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -434,10 +435,8 @@
return -ENODEV;
pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
- return 0;
+ return PTR_ERR_OR_ZERO(pdev);
}
static const struct gpio_led mx31moboard_leds[] __initconst = {
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 4e8b184..72cd77d 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -50,6 +50,7 @@
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx35.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 1221237..2d1c50b 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -36,6 +36,7 @@
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 81b8aff..8eb1570 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -45,6 +45,7 @@
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "pcm037.h"
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 6c56fb5..ee862ad 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -36,6 +36,7 @@
#include "board-pcm038.h"
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index c62b5d2..b623bca 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -35,6 +35,7 @@
#include "common.h"
#include "devices-imx35.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c
index c446027..ee7e57b 100644
--- a/arch/arm/mach-imx/mach-vf610.c
+++ b/arch/arm/mach-imx/mach-vf610.c
@@ -20,7 +20,7 @@
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static const char *vf610_dt_compat[] __initconst = {
+static const char * const vf610_dt_compat[] __initconst = {
"fsl,vf610",
NULL,
};
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 872b3c6..97836e9 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -34,6 +34,7 @@
#include "common.h"
#include "devices-imx35.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
deleted file mode 100644
index 4c11202..0000000
--- a/arch/arm/mach-imx/mm-imx5.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/of_address.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-#include "iomux-v3.h"
-
-/*
- * Define the MX51 memory map.
- */
-static struct map_desc mx51_io_desc[] __initdata = {
- imx_map_entry(MX51, TZIC, MT_DEVICE),
- imx_map_entry(MX51, IRAM, MT_DEVICE),
- imx_map_entry(MX51, AIPS1, MT_DEVICE),
- imx_map_entry(MX51, SPBA0, MT_DEVICE),
- imx_map_entry(MX51, AIPS2, MT_DEVICE),
-};
-
-/*
- * Define the MX53 memory map.
- */
-static struct map_desc mx53_io_desc[] __initdata = {
- imx_map_entry(MX53, TZIC, MT_DEVICE),
- imx_map_entry(MX53, AIPS1, MT_DEVICE),
- imx_map_entry(MX53, SPBA0, MT_DEVICE),
- imx_map_entry(MX53, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx51_map_io(void)
-{
- iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
-}
-
-void __init mx53_map_io(void)
-{
- iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
-}
-
-/*
- * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
- * the Freescale marketing division. However this did not remove the
- * hardware from the chip which still needs to be configured for proper
- * IPU support.
- */
-static void __init imx51_ipu_mipi_setup(void)
-{
- void __iomem *hsc_addr;
- hsc_addr = MX51_IO_ADDRESS(MX51_MIPI_HSC_BASE_ADDR);
-
- /* setup MIPI module to legacy mode */
- __raw_writel(0xf00, hsc_addr);
-
- /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
- __raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff,
- hsc_addr + 0x800);
-}
-
-void __init imx51_init_early(void)
-{
- imx51_ipu_mipi_setup();
- mxc_set_cpu_type(MXC_CPU_MX51);
- mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
- imx_src_init();
-}
-
-void __init imx53_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX53);
- imx_src_init();
-}
-
-void __init mx51_init_irq(void)
-{
- tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
-}
-
-void __init mx53_init_irq(void)
-{
- struct device_node *np;
- void __iomem *base;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx53-tzic");
- base = of_iomap(np, 0);
- WARN_ON(!base);
-
- tzic_init_irq(base);
-}
-
-static struct sdma_platform_data imx51_sdma_pdata __initdata = {
- .fw_name = "sdma-imx51.bin",
-};
-
-static const struct resource imx51_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-void __init imx51_soc_init(void)
-{
- mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
- mxc_device_init();
-
- /* i.mx51 has the i.mx35 type gpio */
- mxc_register_gpio("imx35-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
- mxc_register_gpio("imx35-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
- mxc_register_gpio("imx35-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
- mxc_register_gpio("imx35-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
-
- pinctrl_provide_dummies();
-
- /* i.mx51 has the i.mx35 type sdma */
- imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
-
- /* Setup AIPS registers */
- imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR));
- imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR));
-
- /* i.mx51 has the i.mx31 type audmux */
- platform_device_register_simple("imx31-audmux", 0, imx51_audmux_res,
- ARRAY_SIZE(imx51_audmux_res));
-}
-
-void __init imx51_init_late(void)
-{
- mx51_neon_fixup();
- imx5_pm_init();
-}
-
-void __init imx53_init_late(void)
-{
- imx5_pm_init();
-}
diff --git a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
deleted file mode 100644
index fb38436..0000000
--- a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Exported ksyms of ARCH_MX1
- *
- * Copyright (C) 2008, Darius Augulis <augulis.darius@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-
-#include <linux/platform_data/camera-mx1.h>
-
-/* IMX camera FIQ handler */
-EXPORT_SYMBOL(mx1_camera_sof_fiq_start);
-EXPORT_SYMBOL(mx1_camera_sof_fiq_end);
diff --git a/arch/arm/mach-imx/mx1-camera-fiq.S b/arch/arm/mach-imx/mx1-camera-fiq.S
deleted file mode 100644
index 9c69aa6..0000000
--- a/arch/arm/mach-imx/mx1-camera-fiq.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * Based on linux/arch/arm/lib/floppydma.S
- * Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
- .text
- .global mx1_camera_sof_fiq_end
- .global mx1_camera_sof_fiq_start
-mx1_camera_sof_fiq_start:
- @ enable dma
- ldr r12, [r9]
- orr r12, r12, #0x00000001
- str r12, [r9]
- @ unmask DMA interrupt
- ldr r12, [r8]
- bic r12, r12, r13
- str r12, [r8]
- @ disable SOF interrupt
- ldr r12, [r10]
- bic r12, r12, #0x00010000
- str r12, [r10]
- @ clear SOF flag
- mov r12, #0x00010000
- str r12, [r11]
- @ return from FIQ
- subs pc, lr, #4
-mx1_camera_sof_fiq_end:
diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c
index 52d5b15..1e91a09 100644
--- a/arch/arm/mach-imx/mx31moboard-devboard.c
+++ b/arch/arm/mach-imx/mx31moboard-devboard.c
@@ -24,6 +24,7 @@
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -213,10 +214,8 @@
usbh1_pdata.otg = phy;
pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
- return 0;
+ return PTR_ERR_OR_ZERO(pdev);
}
diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c
index a4f43e9..2e895a8 100644
--- a/arch/arm/mach-imx/mx31moboard-marxbot.c
+++ b/arch/arm/mach-imx/mx31moboard-marxbot.c
@@ -28,6 +28,7 @@
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -327,10 +328,8 @@
usbh1_pdata.otg = phy;
pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
- return 0;
+ return PTR_ERR_OR_ZERO(pdev);
}
static const struct fsl_usb2_platform_data usb_pdata __initconst = {
diff --git a/arch/arm/mach-imx/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c
index 04ae45d..89fc35a 100644
--- a/arch/arm/mach-imx/mx31moboard-smartbot.c
+++ b/arch/arm/mach-imx/mx31moboard-smartbot.c
@@ -28,6 +28,7 @@
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -141,10 +142,8 @@
return -ENODEV;
pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
- return 0;
+ return PTR_ERR_OR_ZERO(pdev);
}
#else
static inline int smartbot_otg_host_init(void) { return 0; }
diff --git a/arch/arm/mach-imx/mx51.h b/arch/arm/mach-imx/mx51.h
deleted file mode 100644
index af844f7..0000000
--- a/arch/arm/mach-imx/mx51.h
+++ /dev/null
@@ -1,346 +0,0 @@
-#ifndef __MACH_MX51_H__
-#define __MACH_MX51_H__
-
-/*
- * IROM
- */
-#define MX51_IROM_BASE_ADDR 0x0
-#define MX51_IROM_SIZE SZ_64K
-
-/*
- * IRAM
- */
-#define MX51_IRAM_BASE_ADDR 0x1ffe0000 /* internal ram */
-#define MX51_IRAM_PARTITIONS 16
-#define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */
-
-#define MX51_GPU_BASE_ADDR 0x20000000
-#define MX51_GPU_CTRL_BASE_ADDR 0x30000000
-#define MX51_IPU_CTRL_BASE_ADDR 0x40000000
-
-/*
- * SPBA global module enabled #0
- */
-#define MX51_SPBA0_BASE_ADDR 0x70000000
-#define MX51_SPBA0_SIZE SZ_1M
-
-#define MX51_ESDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x04000)
-#define MX51_ESDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x08000)
-#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0c000)
-#define MX51_ECSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x10000)
-#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x14000)
-#define MX51_ESDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x20000)
-#define MX51_ESDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x24000)
-#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x28000)
-#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x30000)
-#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x34000)
-#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x38000)
-#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x3c000)
-
-/*
- * AIPS 1
- */
-#define MX51_AIPS1_BASE_ADDR 0x73f00000
-#define MX51_AIPS1_SIZE SZ_1M
-
-#define MX51_USB_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000)
-#define MX51_USB_OTG_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0000)
-#define MX51_USB_HS1_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0200)
-#define MX51_USB_HS2_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0400)
-#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x84000)
-#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x88000)
-#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x8c000)
-#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x90000)
-#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x94000)
-#define MX51_WDOG1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x98000)
-#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x9c000)
-#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa0000)
-#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa4000)
-#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa8000)
-#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xac000)
-#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb0000)
-#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb4000)
-#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb8000)
-#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xbc000)
-#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xc0000)
-#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd0000)
-#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd4000)
-#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd8000)
-
-/*
- * AIPS 2
- */
-#define MX51_AIPS2_BASE_ADDR 0x83f00000
-#define MX51_AIPS2_SIZE SZ_1M
-
-#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x80000)
-#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x84000)
-#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x88000)
-#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x94000)
-#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x98000)
-#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x9c000)
-#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa0000)
-#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa4000)
-#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa8000)
-#define MX51_ECSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xac000)
-#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb0000)
-#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb4000)
-#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb8000)
-#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xbc000)
-#define MX51_CSPI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc0000)
-#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc4000)
-#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc8000)
-#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xcc000)
-#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd0000)
-#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd8000)
-#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd9000)
-#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xda000)
-#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdb000)
-#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdbf00)
-#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdc000)
-#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe0000)
-#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe4000)
-#define MX51_SSI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe8000)
-#define MX51_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xec000)
-#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf0000)
-#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf4000)
-#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf8000)
-
-#define MX51_CSD0_BASE_ADDR 0x90000000
-#define MX51_CSD1_BASE_ADDR 0xa0000000
-#define MX51_CS0_BASE_ADDR 0xb0000000
-#define MX51_CS1_BASE_ADDR 0xb8000000
-#define MX51_CS2_BASE_ADDR 0xc0000000
-#define MX51_CS3_BASE_ADDR 0xc8000000
-#define MX51_CS4_BASE_ADDR 0xcc000000
-#define MX51_CS5_BASE_ADDR 0xce000000
-
-/*
- * NFC
- */
-#define MX51_NFC_AXI_BASE_ADDR 0xcfff0000 /* NAND flash AXI */
-#define MX51_NFC_AXI_SIZE SZ_64K
-
-#define MX51_GPU2D_BASE_ADDR 0xd0000000
-#define MX51_TZIC_BASE_ADDR 0xe0000000
-#define MX51_TZIC_SIZE SZ_16K
-
-#define MX51_IO_P2V(x) IMX_IO_P2V(x)
-#define MX51_IO_ADDRESS(x) IOMEM(MX51_IO_P2V(x))
-
-/*
- * defines for SPBA modules
- */
-#define MX51_SPBA_SDHC1 0x04
-#define MX51_SPBA_SDHC2 0x08
-#define MX51_SPBA_UART3 0x0c
-#define MX51_SPBA_CSPI1 0x10
-#define MX51_SPBA_SSI2 0x14
-#define MX51_SPBA_SDHC3 0x20
-#define MX51_SPBA_SDHC4 0x24
-#define MX51_SPBA_SPDIF 0x28
-#define MX51_SPBA_ATA 0x30
-#define MX51_SPBA_SLIM 0x34
-#define MX51_SPBA_HSI2C 0x38
-#define MX51_SPBA_CTRL 0x3c
-
-/*
- * Defines for modules using static and dynamic DMA channels
- */
-#define MX51_MXC_DMA_CHANNEL_IRAM 30
-#define MX51_MXC_DMA_CHANNEL_SPDIF_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART1_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART1_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART2_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART2_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART3_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART3_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_MMC1 MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_MMC2 MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_SSI1_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_SSI1_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_SSI2_RX MXC_DMA_DYNAMIC_CHANNEL
-#ifdef CONFIG_SDMA_IRAM
-#define MX51_MXC_DMA_CHANNEL_SSI2_TX (MX51_MXC_DMA_CHANNEL_IRAM + 1)
-#else /*CONFIG_SDMA_IRAM */
-#define MX51_MXC_DMA_CHANNEL_SSI2_TX MXC_DMA_DYNAMIC_CHANNEL
-#endif /*CONFIG_SDMA_IRAM */
-#define MX51_MXC_DMA_CHANNEL_CSPI1_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI1_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI2_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI2_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI3_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI3_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_ATA_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL
-
-#define MX51_IS_MEM_DEVICE_NONSHARED(x) 0
-
-/*
- * DMA request assignments
- */
-#define MX51_DMA_REQ_VPU 0
-#define MX51_DMA_REQ_GPC 1
-#define MX51_DMA_REQ_ATA_RX 2
-#define MX51_DMA_REQ_ATA_TX 3
-#define MX51_DMA_REQ_ATA_TX_END 4
-#define MX51_DMA_REQ_SLIM_B 5
-#define MX51_DMA_REQ_CSPI1_RX 6
-#define MX51_DMA_REQ_CSPI1_TX 7
-#define MX51_DMA_REQ_CSPI2_RX 8
-#define MX51_DMA_REQ_CSPI2_TX 9
-#define MX51_DMA_REQ_HS_I2C_TX 10
-#define MX51_DMA_REQ_HS_I2C_RX 11
-#define MX51_DMA_REQ_FIRI_RX 12
-#define MX51_DMA_REQ_FIRI_TX 13
-#define MX51_DMA_REQ_EXTREQ1 14
-#define MX51_DMA_REQ_GPU 15
-#define MX51_DMA_REQ_UART2_RX 16
-#define MX51_DMA_REQ_UART2_TX 17
-#define MX51_DMA_REQ_UART1_RX 18
-#define MX51_DMA_REQ_UART1_TX 19
-#define MX51_DMA_REQ_SDHC1 20
-#define MX51_DMA_REQ_SDHC2 21
-#define MX51_DMA_REQ_SSI2_RX1 22
-#define MX51_DMA_REQ_SSI2_TX1 23
-#define MX51_DMA_REQ_SSI2_RX0 24
-#define MX51_DMA_REQ_SSI2_TX0 25
-#define MX51_DMA_REQ_SSI1_RX1 26
-#define MX51_DMA_REQ_SSI1_TX1 27
-#define MX51_DMA_REQ_SSI1_RX0 28
-#define MX51_DMA_REQ_SSI1_TX0 29
-#define MX51_DMA_REQ_EMI_RD 30
-#define MX51_DMA_REQ_CTI2_0 31
-#define MX51_DMA_REQ_EMI_WR 32
-#define MX51_DMA_REQ_CTI2_1 33
-#define MX51_DMA_REQ_EPIT2 34
-#define MX51_DMA_REQ_SSI3_RX1 35
-#define MX51_DMA_REQ_IPU 36
-#define MX51_DMA_REQ_SSI3_TX1 37
-#define MX51_DMA_REQ_CSPI_RX 38
-#define MX51_DMA_REQ_CSPI_TX 39
-#define MX51_DMA_REQ_SDHC3 40
-#define MX51_DMA_REQ_SDHC4 41
-#define MX51_DMA_REQ_SLIM_B_TX 42
-#define MX51_DMA_REQ_UART3_RX 43
-#define MX51_DMA_REQ_UART3_TX 44
-#define MX51_DMA_REQ_SPDIF 45
-#define MX51_DMA_REQ_SSI3_RX0 46
-#define MX51_DMA_REQ_SSI3_TX0 47
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX51_INT_BASE (NR_IRQS_LEGACY + 0)
-#define MX51_INT_RESV0 (NR_IRQS_LEGACY + 0)
-#define MX51_INT_ESDHC1 (NR_IRQS_LEGACY + 1)
-#define MX51_INT_ESDHC2 (NR_IRQS_LEGACY + 2)
-#define MX51_INT_ESDHC3 (NR_IRQS_LEGACY + 3)
-#define MX51_INT_ESDHC4 (NR_IRQS_LEGACY + 4)
-#define MX51_INT_RESV5 (NR_IRQS_LEGACY + 5)
-#define MX51_INT_SDMA (NR_IRQS_LEGACY + 6)
-#define MX51_INT_IOMUX (NR_IRQS_LEGACY + 7)
-#define MX51_INT_NFC (NR_IRQS_LEGACY + 8)
-#define MX51_INT_VPU (NR_IRQS_LEGACY + 9)
-#define MX51_INT_IPU_ERR (NR_IRQS_LEGACY + 10)
-#define MX51_INT_IPU_SYN (NR_IRQS_LEGACY + 11)
-#define MX51_INT_GPU (NR_IRQS_LEGACY + 12)
-#define MX51_INT_RESV13 (NR_IRQS_LEGACY + 13)
-#define MX51_INT_USB_HS1 (NR_IRQS_LEGACY + 14)
-#define MX51_INT_EMI (NR_IRQS_LEGACY + 15)
-#define MX51_INT_USB_HS2 (NR_IRQS_LEGACY + 16)
-#define MX51_INT_USB_HS3 (NR_IRQS_LEGACY + 17)
-#define MX51_INT_USB_OTG (NR_IRQS_LEGACY + 18)
-#define MX51_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19)
-#define MX51_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20)
-#define MX51_INT_SCC_SMN (NR_IRQS_LEGACY + 21)
-#define MX51_INT_SCC_STZ (NR_IRQS_LEGACY + 22)
-#define MX51_INT_SCC_SCM (NR_IRQS_LEGACY + 23)
-#define MX51_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24)
-#define MX51_INT_SRTC_TZ (NR_IRQS_LEGACY + 25)
-#define MX51_INT_RTIC (NR_IRQS_LEGACY + 26)
-#define MX51_INT_CSU (NR_IRQS_LEGACY + 27)
-#define MX51_INT_SLIM_B (NR_IRQS_LEGACY + 28)
-#define MX51_INT_SSI1 (NR_IRQS_LEGACY + 29)
-#define MX51_INT_SSI2 (NR_IRQS_LEGACY + 30)
-#define MX51_INT_UART1 (NR_IRQS_LEGACY + 31)
-#define MX51_INT_UART2 (NR_IRQS_LEGACY + 32)
-#define MX51_INT_UART3 (NR_IRQS_LEGACY + 33)
-#define MX51_INT_RESV34 (NR_IRQS_LEGACY + 34)
-#define MX51_INT_RESV35 (NR_IRQS_LEGACY + 35)
-#define MX51_INT_ECSPI1 (NR_IRQS_LEGACY + 36)
-#define MX51_INT_ECSPI2 (NR_IRQS_LEGACY + 37)
-#define MX51_INT_CSPI (NR_IRQS_LEGACY + 38)
-#define MX51_INT_GPT (NR_IRQS_LEGACY + 39)
-#define MX51_INT_EPIT1 (NR_IRQS_LEGACY + 40)
-#define MX51_INT_EPIT2 (NR_IRQS_LEGACY + 41)
-#define MX51_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42)
-#define MX51_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43)
-#define MX51_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44)
-#define MX51_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45)
-#define MX51_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46)
-#define MX51_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47)
-#define MX51_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48)
-#define MX51_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49)
-#define MX51_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50)
-#define MX51_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51)
-#define MX51_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52)
-#define MX51_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53)
-#define MX51_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54)
-#define MX51_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55)
-#define MX51_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56)
-#define MX51_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57)
-#define MX51_INT_WDOG1 (NR_IRQS_LEGACY + 58)
-#define MX51_INT_WDOG2 (NR_IRQS_LEGACY + 59)
-#define MX51_INT_KPP (NR_IRQS_LEGACY + 60)
-#define MX51_INT_PWM1 (NR_IRQS_LEGACY + 61)
-#define MX51_INT_I2C1 (NR_IRQS_LEGACY + 62)
-#define MX51_INT_I2C2 (NR_IRQS_LEGACY + 63)
-#define MX51_INT_HS_I2C (NR_IRQS_LEGACY + 64)
-#define MX51_INT_RESV65 (NR_IRQS_LEGACY + 65)
-#define MX51_INT_RESV66 (NR_IRQS_LEGACY + 66)
-#define MX51_INT_SIM_IPB (NR_IRQS_LEGACY + 67)
-#define MX51_INT_SIM_DAT (NR_IRQS_LEGACY + 68)
-#define MX51_INT_IIM (NR_IRQS_LEGACY + 69)
-#define MX51_INT_ATA (NR_IRQS_LEGACY + 70)
-#define MX51_INT_CCM1 (NR_IRQS_LEGACY + 71)
-#define MX51_INT_CCM2 (NR_IRQS_LEGACY + 72)
-#define MX51_INT_GPC1 (NR_IRQS_LEGACY + 73)
-#define MX51_INT_GPC2 (NR_IRQS_LEGACY + 74)
-#define MX51_INT_SRC (NR_IRQS_LEGACY + 75)
-#define MX51_INT_NM (NR_IRQS_LEGACY + 76)
-#define MX51_INT_PMU (NR_IRQS_LEGACY + 77)
-#define MX51_INT_CTI_IRQ (NR_IRQS_LEGACY + 78)
-#define MX51_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79)
-#define MX51_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80)
-#define MX51_INT_MCG_ERR (NR_IRQS_LEGACY + 81)
-#define MX51_INT_MCG_TMR (NR_IRQS_LEGACY + 82)
-#define MX51_INT_MCG_FUNC (NR_IRQS_LEGACY + 83)
-#define MX51_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84)
-#define MX51_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85)
-#define MX51_INT_RESV86 (NR_IRQS_LEGACY + 86)
-#define MX51_INT_FEC (NR_IRQS_LEGACY + 87)
-#define MX51_INT_OWIRE (NR_IRQS_LEGACY + 88)
-#define MX51_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89)
-#define MX51_INT_SJC (NR_IRQS_LEGACY + 90)
-#define MX51_INT_SPDIF (NR_IRQS_LEGACY + 91)
-#define MX51_INT_TVE (NR_IRQS_LEGACY + 92)
-#define MX51_INT_FIRI (NR_IRQS_LEGACY + 93)
-#define MX51_INT_PWM2 (NR_IRQS_LEGACY + 94)
-#define MX51_INT_SLIM_EXP (NR_IRQS_LEGACY + 95)
-#define MX51_INT_SSI3 (NR_IRQS_LEGACY + 96)
-#define MX51_INT_EMI_BOOT (NR_IRQS_LEGACY + 97)
-#define MX51_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98)
-#define MX51_INT_SMC_RX (NR_IRQS_LEGACY + 99)
-#define MX51_INT_VPU_IDLE (NR_IRQS_LEGACY + 100)
-#define MX51_INT_EMI_NFC (NR_IRQS_LEGACY + 101)
-#define MX51_INT_GPU_IDLE (NR_IRQS_LEGACY + 102)
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-extern int mx51_revision(void);
-extern void mx51_display_revision(void);
-#endif
-
-#endif /* ifndef __MACH_MX51_H__ */
diff --git a/arch/arm/mach-imx/mx53.h b/arch/arm/mach-imx/mx53.h
deleted file mode 100644
index f829d1c..0000000
--- a/arch/arm/mach-imx/mx53.h
+++ /dev/null
@@ -1,342 +0,0 @@
-#ifndef __MACH_MX53_H__
-#define __MACH_MX53_H__
-
-/*
- * IROM
- */
-#define MX53_IROM_BASE_ADDR 0x0
-#define MX53_IROM_SIZE SZ_64K
-
-/* TZIC */
-#define MX53_TZIC_BASE_ADDR 0x0FFFC000
-#define MX53_TZIC_SIZE SZ_16K
-
-/*
- * AHCI SATA
- */
-#define MX53_SATA_BASE_ADDR 0x10000000
-
-/*
- * NFC
- */
-#define MX53_NFC_AXI_BASE_ADDR 0xF7FF0000 /* NAND flash AXI */
-#define MX53_NFC_AXI_SIZE SZ_64K
-
-/*
- * IRAM
- */
-#define MX53_IRAM_BASE_ADDR 0xF8000000 /* internal ram */
-#define MX53_IRAM_PARTITIONS 16
-#define MX53_IRAM_SIZE (MX53_IRAM_PARTITIONS * SZ_8K) /* 128KB */
-
-/*
- * Graphics Memory of GPU
- */
-#define MX53_IPU_CTRL_BASE_ADDR 0x18000000
-#define MX53_GPU2D_BASE_ADDR 0x20000000
-#define MX53_GPU_BASE_ADDR 0x30000000
-#define MX53_GPU_GMEM_BASE_ADDR 0xF8020000
-
-#define MX53_DEBUG_BASE_ADDR 0x40000000
-#define MX53_DEBUG_SIZE SZ_1M
-#define MX53_ETB_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00001000)
-#define MX53_ETM_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00002000)
-#define MX53_TPIU_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00003000)
-#define MX53_CTI0_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00004000)
-#define MX53_CTI1_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00005000)
-#define MX53_CTI2_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00006000)
-#define MX53_CTI3_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00007000)
-#define MX53_CORTEX_DBG_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00008000)
-
-/*
- * SPBA global module enabled #0
- */
-#define MX53_SPBA0_BASE_ADDR 0x50000000
-#define MX53_SPBA0_SIZE SZ_1M
-
-#define MX53_ESDHC1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00004000)
-#define MX53_ESDHC2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00008000)
-#define MX53_UART3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0000C000)
-#define MX53_ECSPI1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00010000)
-#define MX53_SSI2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00014000)
-#define MX53_ESDHC3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00020000)
-#define MX53_ESDHC4_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00024000)
-#define MX53_SPDIF_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00028000)
-#define MX53_ASRC_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0002C000)
-#define MX53_ATA_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00030000)
-#define MX53_SLIM_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00034000)
-#define MX53_HSI2C_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00038000)
-#define MX53_SPBA_CTRL_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0003C000)
-
-/*
- * AIPS 1
- */
-#define MX53_AIPS1_BASE_ADDR 0x53F00000
-#define MX53_AIPS1_SIZE SZ_1M
-
-#define MX53_OTG_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00080000)
-#define MX53_GPIO1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00084000)
-#define MX53_GPIO2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00088000)
-#define MX53_GPIO3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0008C000)
-#define MX53_GPIO4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00090000)
-#define MX53_KPP_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00094000)
-#define MX53_WDOG1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00098000)
-#define MX53_WDOG2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0009C000)
-#define MX53_GPT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A0000)
-#define MX53_SRTC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A4000)
-#define MX53_IOMUXC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A8000)
-#define MX53_EPIT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000AC000)
-#define MX53_EPIT2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B0000)
-#define MX53_PWM1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B4000)
-#define MX53_PWM2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B8000)
-#define MX53_UART1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000BC000)
-#define MX53_UART2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000C0000)
-#define MX53_SRC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D0000)
-#define MX53_CCM_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D4000)
-#define MX53_GPC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D8000)
-#define MX53_GPIO5_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000DC000)
-#define MX53_GPIO6_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E0000)
-#define MX53_GPIO7_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E4000)
-#define MX53_ATA_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E8000)
-#define MX53_I2C3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000EC000)
-#define MX53_UART4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000F0000)
-
-/*
- * AIPS 2
- */
-#define MX53_AIPS2_BASE_ADDR 0x63F00000
-#define MX53_AIPS2_SIZE SZ_1M
-
-#define MX53_PLL1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00080000)
-#define MX53_PLL2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00084000)
-#define MX53_PLL3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00088000)
-#define MX53_PLL4_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x0008C000)
-#define MX53_UART5_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00090000)
-#define MX53_AHBMAX_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00094000)
-#define MX53_IIM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00098000)
-#define MX53_CSU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x0009C000)
-#define MX53_ARM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A0000)
-#define MX53_OWIRE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A4000)
-#define MX53_FIRI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A8000)
-#define MX53_ECSPI2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000AC000)
-#define MX53_SDMA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B0000)
-#define MX53_SCC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B4000)
-#define MX53_ROMCP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B8000)
-#define MX53_RTIC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000BC000)
-#define MX53_CSPI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C0000)
-#define MX53_I2C2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C4000)
-#define MX53_I2C1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C8000)
-#define MX53_SSI1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000CC000)
-#define MX53_AUDMUX_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D0000)
-#define MX53_RTC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D4000)
-#define MX53_M4IF_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D8000)
-#define MX53_ESDCTL_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D9000)
-#define MX53_WEIM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DA000)
-#define MX53_NFC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DB000)
-#define MX53_EMI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DBF00)
-#define MX53_MIPI_HSC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DC000)
-#define MX53_MLB_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E4000)
-#define MX53_SSI3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E8000)
-#define MX53_FEC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000EC000)
-#define MX53_TVE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F0000)
-#define MX53_VPU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F4000)
-#define MX53_SAHARA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F8000)
-#define MX53_PTP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000FC000)
-
-/*
- * Memory regions and CS
- */
-#define MX53_CSD0_BASE_ADDR 0x70000000
-#define MX53_CSD1_BASE_ADDR 0xB0000000
-#define MX53_CS0_BASE_ADDR 0xF0000000
-#define MX53_CS1_32MB_BASE_ADDR 0xF2000000
-#define MX53_CS1_64MB_BASE_ADDR 0xF4000000
-#define MX53_CS2_64MB_BASE_ADDR 0xF4000000
-#define MX53_CS2_96MB_BASE_ADDR 0xF6000000
-#define MX53_CS3_BASE_ADDR 0xF6000000
-
-#define MX53_IO_P2V(x) IMX_IO_P2V(x)
-#define MX53_IO_ADDRESS(x) IOMEM(MX53_IO_P2V(x))
-
-/*
- * defines for SPBA modules
- */
-#define MX53_SPBA_SDHC1 0x04
-#define MX53_SPBA_SDHC2 0x08
-#define MX53_SPBA_UART3 0x0C
-#define MX53_SPBA_CSPI1 0x10
-#define MX53_SPBA_SSI2 0x14
-#define MX53_SPBA_SDHC3 0x20
-#define MX53_SPBA_SDHC4 0x24
-#define MX53_SPBA_SPDIF 0x28
-#define MX53_SPBA_ATA 0x30
-#define MX53_SPBA_SLIM 0x34
-#define MX53_SPBA_HSI2C 0x38
-#define MX53_SPBA_CTRL 0x3C
-
-/*
- * DMA request assignments
- */
-#define MX53_DMA_REQ_SSI3_TX0 47
-#define MX53_DMA_REQ_SSI3_RX0 46
-#define MX53_DMA_REQ_SSI3_TX1 45
-#define MX53_DMA_REQ_SSI3_RX1 44
-#define MX53_DMA_REQ_UART3_TX 43
-#define MX53_DMA_REQ_UART3_RX 42
-#define MX53_DMA_REQ_ESAI_TX 41
-#define MX53_DMA_REQ_ESAI_RX 40
-#define MX53_DMA_REQ_CSPI_TX 39
-#define MX53_DMA_REQ_CSPI_RX 38
-#define MX53_DMA_REQ_ASRC_DMA6 37
-#define MX53_DMA_REQ_ASRC_DMA5 36
-#define MX53_DMA_REQ_ASRC_DMA4 35
-#define MX53_DMA_REQ_ASRC_DMA3 34
-#define MX53_DMA_REQ_ASRC_DMA2 33
-#define MX53_DMA_REQ_ASRC_DMA1 32
-#define MX53_DMA_REQ_EMI_WR 31
-#define MX53_DMA_REQ_EMI_RD 30
-#define MX53_DMA_REQ_SSI1_TX0 29
-#define MX53_DMA_REQ_SSI1_RX0 28
-#define MX53_DMA_REQ_SSI1_TX1 27
-#define MX53_DMA_REQ_SSI1_RX1 26
-#define MX53_DMA_REQ_SSI2_TX0 25
-#define MX53_DMA_REQ_SSI2_RX0 24
-#define MX53_DMA_REQ_SSI2_TX1 23
-#define MX53_DMA_REQ_SSI2_RX1 22
-#define MX53_DMA_REQ_I2C2_SDHC2 21
-#define MX53_DMA_REQ_I2C1_SDHC1 20
-#define MX53_DMA_REQ_UART1_TX 19
-#define MX53_DMA_REQ_UART1_RX 18
-#define MX53_DMA_REQ_UART5_TX 17
-#define MX53_DMA_REQ_UART5_RX 16
-#define MX53_DMA_REQ_SPDIF_TX 15
-#define MX53_DMA_REQ_SPDIF_RX 14
-#define MX53_DMA_REQ_UART2_FIRI_TX 13
-#define MX53_DMA_REQ_UART2_FIRI_RX 12
-#define MX53_DMA_REQ_SDHC4 11
-#define MX53_DMA_REQ_I2C3_SDHC3 10
-#define MX53_DMA_REQ_CSPI2_TX 9
-#define MX53_DMA_REQ_CSPI2_RX 8
-#define MX53_DMA_REQ_CSPI1_TX 7
-#define MX53_DMA_REQ_CSPI1_RX 6
-#define MX53_DMA_REQ_IPU 5
-#define MX53_DMA_REQ_ATA_TX_END 4
-#define MX53_DMA_REQ_ATA_UART4_TX 3
-#define MX53_DMA_REQ_ATA_UART4_RX 2
-#define MX53_DMA_REQ_GPC 1
-#define MX53_DMA_REQ_VPU 0
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX53_INT_RESV0 (NR_IRQS_LEGACY + 0)
-#define MX53_INT_ESDHC1 (NR_IRQS_LEGACY + 1)
-#define MX53_INT_ESDHC2 (NR_IRQS_LEGACY + 2)
-#define MX53_INT_ESDHC3 (NR_IRQS_LEGACY + 3)
-#define MX53_INT_ESDHC4 (NR_IRQS_LEGACY + 4)
-#define MX53_INT_DAP (NR_IRQS_LEGACY + 5)
-#define MX53_INT_SDMA (NR_IRQS_LEGACY + 6)
-#define MX53_INT_IOMUX (NR_IRQS_LEGACY + 7)
-#define MX53_INT_NFC (NR_IRQS_LEGACY + 8)
-#define MX53_INT_VPU (NR_IRQS_LEGACY + 9)
-#define MX53_INT_IPU_ERR (NR_IRQS_LEGACY + 10)
-#define MX53_INT_IPU_SYN (NR_IRQS_LEGACY + 11)
-#define MX53_INT_GPU (NR_IRQS_LEGACY + 12)
-#define MX53_INT_UART4 (NR_IRQS_LEGACY + 13)
-#define MX53_INT_USB_H1 (NR_IRQS_LEGACY + 14)
-#define MX53_INT_EMI (NR_IRQS_LEGACY + 15)
-#define MX53_INT_USB_H2 (NR_IRQS_LEGACY + 16)
-#define MX53_INT_USB_H3 (NR_IRQS_LEGACY + 17)
-#define MX53_INT_USB_OTG (NR_IRQS_LEGACY + 18)
-#define MX53_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19)
-#define MX53_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20)
-#define MX53_INT_SCC_SMN (NR_IRQS_LEGACY + 21)
-#define MX53_INT_SCC_STZ (NR_IRQS_LEGACY + 22)
-#define MX53_INT_SCC_SCM (NR_IRQS_LEGACY + 23)
-#define MX53_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24)
-#define MX53_INT_SRTC_TZ (NR_IRQS_LEGACY + 25)
-#define MX53_INT_RTIC (NR_IRQS_LEGACY + 26)
-#define MX53_INT_CSU (NR_IRQS_LEGACY + 27)
-#define MX53_INT_SATA (NR_IRQS_LEGACY + 28)
-#define MX53_INT_SSI1 (NR_IRQS_LEGACY + 29)
-#define MX53_INT_SSI2 (NR_IRQS_LEGACY + 30)
-#define MX53_INT_UART1 (NR_IRQS_LEGACY + 31)
-#define MX53_INT_UART2 (NR_IRQS_LEGACY + 32)
-#define MX53_INT_UART3 (NR_IRQS_LEGACY + 33)
-#define MX53_INT_RTC (NR_IRQS_LEGACY + 34)
-#define MX53_INT_PTP (NR_IRQS_LEGACY + 35)
-#define MX53_INT_ECSPI1 (NR_IRQS_LEGACY + 36)
-#define MX53_INT_ECSPI2 (NR_IRQS_LEGACY + 37)
-#define MX53_INT_CSPI (NR_IRQS_LEGACY + 38)
-#define MX53_INT_GPT (NR_IRQS_LEGACY + 39)
-#define MX53_INT_EPIT1 (NR_IRQS_LEGACY + 40)
-#define MX53_INT_EPIT2 (NR_IRQS_LEGACY + 41)
-#define MX53_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42)
-#define MX53_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43)
-#define MX53_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44)
-#define MX53_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45)
-#define MX53_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46)
-#define MX53_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47)
-#define MX53_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48)
-#define MX53_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49)
-#define MX53_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50)
-#define MX53_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51)
-#define MX53_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52)
-#define MX53_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53)
-#define MX53_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54)
-#define MX53_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55)
-#define MX53_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56)
-#define MX53_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57)
-#define MX53_INT_WDOG1 (NR_IRQS_LEGACY + 58)
-#define MX53_INT_WDOG2 (NR_IRQS_LEGACY + 59)
-#define MX53_INT_KPP (NR_IRQS_LEGACY + 60)
-#define MX53_INT_PWM1 (NR_IRQS_LEGACY + 61)
-#define MX53_INT_I2C1 (NR_IRQS_LEGACY + 62)
-#define MX53_INT_I2C2 (NR_IRQS_LEGACY + 63)
-#define MX53_INT_I2C3 (NR_IRQS_LEGACY + 64)
-#define MX53_INT_MLB (NR_IRQS_LEGACY + 65)
-#define MX53_INT_ASRC (NR_IRQS_LEGACY + 66)
-#define MX53_INT_SPDIF (NR_IRQS_LEGACY + 67)
-#define MX53_INT_SIM_DAT (NR_IRQS_LEGACY + 68)
-#define MX53_INT_IIM (NR_IRQS_LEGACY + 69)
-#define MX53_INT_ATA (NR_IRQS_LEGACY + 70)
-#define MX53_INT_CCM1 (NR_IRQS_LEGACY + 71)
-#define MX53_INT_CCM2 (NR_IRQS_LEGACY + 72)
-#define MX53_INT_GPC1 (NR_IRQS_LEGACY + 73)
-#define MX53_INT_GPC2 (NR_IRQS_LEGACY + 74)
-#define MX53_INT_SRC (NR_IRQS_LEGACY + 75)
-#define MX53_INT_NM (NR_IRQS_LEGACY + 76)
-#define MX53_INT_PMU (NR_IRQS_LEGACY + 77)
-#define MX53_INT_CTI_IRQ (NR_IRQS_LEGACY + 78)
-#define MX53_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79)
-#define MX53_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80)
-#define MX53_INT_ESAI (NR_IRQS_LEGACY + 81)
-#define MX53_INT_CAN1 (NR_IRQS_LEGACY + 82)
-#define MX53_INT_CAN2 (NR_IRQS_LEGACY + 83)
-#define MX53_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84)
-#define MX53_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85)
-#define MX53_INT_UART5 (NR_IRQS_LEGACY + 86)
-#define MX53_INT_FEC (NR_IRQS_LEGACY + 87)
-#define MX53_INT_OWIRE (NR_IRQS_LEGACY + 88)
-#define MX53_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89)
-#define MX53_INT_SJC (NR_IRQS_LEGACY + 90)
-#define MX53_INT_TVE (NR_IRQS_LEGACY + 92)
-#define MX53_INT_FIRI (NR_IRQS_LEGACY + 93)
-#define MX53_INT_PWM2 (NR_IRQS_LEGACY + 94)
-#define MX53_INT_SLIM_EXP (NR_IRQS_LEGACY + 95)
-#define MX53_INT_SSI3 (NR_IRQS_LEGACY + 96)
-#define MX53_INT_EMI_BOOT (NR_IRQS_LEGACY + 97)
-#define MX53_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98)
-#define MX53_INT_SMC_RX (NR_IRQS_LEGACY + 99)
-#define MX53_INT_VPU_IDLE (NR_IRQS_LEGACY + 100)
-#define MX53_INT_EMI_NFC (NR_IRQS_LEGACY + 101)
-#define MX53_INT_GPU_IDLE (NR_IRQS_LEGACY + 102)
-#define MX53_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103)
-#define MX53_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104)
-#define MX53_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105)
-#define MX53_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106)
-#define MX53_INT_GPIO7_LOW (NR_IRQS_LEGACY + 107)
-#define MX53_INT_GPIO7_HIGH (NR_IRQS_LEGACY + 108)
-
-#endif /* ifndef __MACH_MX53_H__ */
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index 75d6a37..a39b69e 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -154,10 +154,17 @@
#endif
#ifndef __ASSEMBLY__
+#ifdef CONFIG_SOC_IMX6SL
static inline bool cpu_is_imx6sl(void)
{
return __mxc_cpu_type == MXC_CPU_IMX6SL;
}
+#else
+static inline bool cpu_is_imx6sl(void)
+{
+ return false;
+}
+#endif
static inline bool cpu_is_imx6dl(void)
{
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 58aeaf5..f1f80ab 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -19,9 +19,26 @@
#include "common.h"
#include "cpuidle.h"
-#include "crm-regs-imx5.h"
#include "hardware.h"
+#define MXC_CCM_CLPCR 0x54
+#define MXC_CCM_CLPCR_LPM_OFFSET 0
+#define MXC_CCM_CLPCR_LPM_MASK 0x3
+#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET 9
+#define MXC_CCM_CLPCR_VSTBY (0x1 << 8)
+#define MXC_CCM_CLPCR_SBYOS (0x1 << 6)
+
+#define MXC_CORTEXA8_PLAT_LPC 0xc
+#define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0)
+#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1)
+
+#define MXC_SRPG_NEON_SRPGCR 0x280
+#define MXC_SRPG_ARM_SRPGCR 0x2a0
+#define MXC_SRPG_EMPGC0_SRPGCR 0x2c0
+#define MXC_SRPG_EMPGC1_SRPGCR 0x2d0
+
+#define MXC_SRPGCR_PCR 1
+
/*
* The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit.
* This is also the lowest power state possible without affecting
@@ -32,6 +49,30 @@
*/
#define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF
+struct imx5_pm_data {
+ phys_addr_t cortex_addr;
+ phys_addr_t gpc_addr;
+};
+
+static const struct imx5_pm_data imx51_pm_data __initconst = {
+ .cortex_addr = 0x83fa0000,
+ .gpc_addr = 0x73fd8000,
+};
+
+static const struct imx5_pm_data imx53_pm_data __initconst = {
+ .cortex_addr = 0x63fa0000,
+ .gpc_addr = 0x53fd8000,
+};
+
+static void __iomem *ccm_base;
+static void __iomem *cortex_base;
+static void __iomem *gpc_base;
+
+void __init imx5_pm_set_ccm_base(void __iomem *base)
+{
+ ccm_base = base;
+}
+
/*
* set cpu low power mode before WFI instruction. This function is called
* mx5 because it can be used for mx51, and mx53.
@@ -43,12 +84,16 @@
int stop_mode = 0;
/* always allow platform to issue a deep sleep mode request */
- plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) &
+ plat_lpc = __raw_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) &
~(MXC_CORTEXA8_PLAT_LPC_DSM);
- ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
- arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
- empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR);
- empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR);
+ ccm_clpcr = __raw_readl(ccm_base + MXC_CCM_CLPCR) &
+ ~(MXC_CCM_CLPCR_LPM_MASK);
+ arm_srpgcr = __raw_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) &
+ ~(MXC_SRPGCR_PCR);
+ empgc0 = __raw_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) &
+ ~(MXC_SRPGCR_PCR);
+ empgc1 = __raw_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) &
+ ~(MXC_SRPGCR_PCR);
switch (mode) {
case WAIT_CLOCKED:
@@ -82,17 +127,17 @@
return;
}
- __raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
- __raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
- __raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
- __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
+ __raw_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC);
+ __raw_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR);
+ __raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR);
+ __raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR);
if (stop_mode) {
empgc0 |= MXC_SRPGCR_PCR;
empgc1 |= MXC_SRPGCR_PCR;
- __raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR);
- __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
+ __raw_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
+ __raw_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
}
}
@@ -114,8 +159,8 @@
flush_cache_all();
/*clear the EMPGC0/1 bits */
- __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
- __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
+ __raw_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
+ __raw_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
}
cpu_do_idle();
@@ -149,7 +194,7 @@
imx5_cpu_do_idle();
}
-static int __init imx5_pm_common_init(void)
+static int __init imx5_pm_common_init(const struct imx5_pm_data *data)
{
int ret;
struct clk *gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
@@ -163,15 +208,28 @@
arm_pm_idle = imx5_pm_idle;
+ cortex_base = ioremap(data->cortex_addr, SZ_16K);
+ gpc_base = ioremap(data->gpc_addr, SZ_16K);
+ WARN_ON(!ccm_base || !cortex_base || !gpc_base);
+
/* Set the registers to the default cpu idle state. */
mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
- return imx5_cpuidle_init();
+ ret = imx5_cpuidle_init();
+ if (ret)
+ pr_warn("%s: cpuidle init failed %d\n", __func__, ret);
+
+ suspend_set_ops(&mx5_suspend_ops);
+
+ return 0;
}
-void __init imx5_pm_init(void)
+void __init imx51_pm_init(void)
{
- int ret = imx5_pm_common_init();
- if (!ret)
- suspend_set_ops(&mx5_suspend_ops);
+ imx5_pm_common_init(&imx51_pm_data);
+}
+
+void __init imx53_pm_init(void)
+{
+ imx5_pm_common_init(&imx53_pm_data);
}
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 9392a8f..5c3af8f 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -129,6 +129,14 @@
0x330, 0x334, 0x320, /* SDCKE0, SDCKE1, RESET */
};
+static const u32 imx6sx_mmdc_io_offset[] __initconst = {
+ 0x2ec, 0x2f0, 0x2f4, 0x2f8, /* DQM0 ~ DQM3 */
+ 0x60c, 0x610, 0x61c, 0x620, /* GPR_B0DS ~ GPR_B3DS */
+ 0x300, 0x2fc, 0x32c, 0x5f4, /* CAS, RAS, SDCLK_0, GPR_ADDS */
+ 0x310, 0x314, 0x5f8, 0x608, /* SODT0, SODT1, MODE_CTL, MODE */
+ 0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */
+};
+
static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
.cpu_type = MXC_CPU_IMX6Q,
.mmdc_compat = "fsl,imx6q-mmdc",
@@ -159,6 +167,16 @@
.mmdc_io_offset = imx6sl_mmdc_io_offset,
};
+static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
+ .cpu_type = MXC_CPU_IMX6SX,
+ .mmdc_compat = "fsl,imx6sx-mmdc",
+ .src_compat = "fsl,imx6sx-src",
+ .iomuxc_compat = "fsl,imx6sx-iomuxc",
+ .gpc_compat = "fsl,imx6sx-gpc",
+ .mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_offset),
+ .mmdc_io_offset = imx6sx_mmdc_io_offset,
+};
+
/*
* This structure is for passing necessary data for low level ocram
* suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
@@ -181,11 +199,13 @@
u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */
} __aligned(8);
-void imx6q_set_int_mem_clk_lpm(void)
+void imx6q_set_int_mem_clk_lpm(bool enable)
{
u32 val = readl_relaxed(ccm_base + CGPR);
- val |= BM_CGPR_INT_MEM_CLK_LPM;
+ val &= ~BM_CGPR_INT_MEM_CLK_LPM;
+ if (enable)
+ val |= BM_CGPR_INT_MEM_CLK_LPM;
writel_relaxed(val, ccm_base + CGPR);
}
@@ -254,6 +274,14 @@
break;
case STOP_POWER_ON:
val |= 0x2 << BP_CLPCR_LPM;
+ val &= ~BM_CLPCR_VSTBY;
+ val &= ~BM_CLPCR_SBYOS;
+ if (cpu_is_imx6sl())
+ val |= BM_CLPCR_BYPASS_PMIC_READY;
+ if (cpu_is_imx6sl() || cpu_is_imx6sx())
+ val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
+ else
+ val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
break;
case WAIT_UNCLOCKED_POWER_OFF:
val |= 0x1 << BP_CLPCR_LPM;
@@ -265,12 +293,12 @@
val |= 0x3 << BP_CLPCR_STBY_COUNT;
val |= BM_CLPCR_VSTBY;
val |= BM_CLPCR_SBYOS;
- if (cpu_is_imx6sl()) {
+ if (cpu_is_imx6sl())
val |= BM_CLPCR_BYPASS_PMIC_READY;
+ if (cpu_is_imx6sl() || cpu_is_imx6sx())
val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
- } else {
+ else
val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
- }
break;
default:
return -EINVAL;
@@ -314,8 +342,22 @@
static int imx6q_pm_enter(suspend_state_t state)
{
switch (state) {
+ case PM_SUSPEND_STANDBY:
+ imx6q_set_lpm(STOP_POWER_ON);
+ imx6q_set_int_mem_clk_lpm(true);
+ imx_gpc_pre_suspend(false);
+ if (cpu_is_imx6sl())
+ imx6sl_set_wait_clk(true);
+ /* Zzz ... */
+ cpu_do_idle();
+ if (cpu_is_imx6sl())
+ imx6sl_set_wait_clk(false);
+ imx_gpc_post_resume();
+ imx6q_set_lpm(WAIT_CLOCKED);
+ break;
case PM_SUSPEND_MEM:
imx6q_set_lpm(STOP_POWER_OFF);
+ imx6q_set_int_mem_clk_lpm(false);
imx6q_enable_wb(true);
/*
* For suspend into ocram, asm code already take care of
@@ -323,7 +365,7 @@
*/
if (!imx6_suspend_in_ocram_fn)
imx6q_enable_rbc(true);
- imx_gpc_pre_suspend();
+ imx_gpc_pre_suspend(true);
imx_anatop_pre_suspend();
imx_set_cpu_jump(0, v7_cpu_resume);
/* Zzz ... */
@@ -334,6 +376,7 @@
imx_gpc_post_resume();
imx6q_enable_rbc(false);
imx6q_enable_wb(false);
+ imx6q_set_int_mem_clk_lpm(true);
imx6q_set_lpm(WAIT_CLOCKED);
break;
default:
@@ -343,9 +386,14 @@
return 0;
}
+static int imx6q_pm_valid(suspend_state_t state)
+{
+ return (state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM);
+}
+
static const struct platform_suspend_ops imx6q_pm_ops = {
.enter = imx6q_pm_enter,
- .valid = suspend_valid_only_mem,
+ .valid = imx6q_pm_valid,
};
void __init imx6q_pm_set_ccm_base(void __iomem *base)
@@ -549,3 +597,8 @@
{
imx6_pm_common_init(&imx6sl_pm_data);
}
+
+void __init imx6sx_pm_init(void)
+{
+ imx6_pm_common_init(&imx6sx_pm_data);
+}
diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c
index 3b0733e..d14c33f 100644
--- a/arch/arm/mach-imx/system.c
+++ b/arch/arm/mach-imx/system.c
@@ -42,7 +42,10 @@
{
unsigned int wcr_enable;
- if (wdog_clk)
+ if (!wdog_base)
+ goto reset_fallback;
+
+ if (!IS_ERR(wdog_clk))
clk_enable(wdog_clk);
if (cpu_is_mx1())
@@ -70,6 +73,7 @@
/* delay to allow the serial port to show the message */
mdelay(50);
+reset_fallback:
/* we'll take a jump through zero as a poor second */
soft_restart(0);
}
@@ -79,13 +83,10 @@
wdog_base = base;
wdog_clk = clk_get_sys("imx2-wdt.0", NULL);
- if (IS_ERR(wdog_clk)) {
+ if (IS_ERR(wdog_clk))
pr_warn("%s: failed to get wdog clock\n", __func__);
- wdog_clk = NULL;
- return;
- }
-
- clk_prepare(wdog_clk);
+ else
+ clk_prepare(wdog_clk);
}
void __init mxc_arch_reset_init_dt(void)
@@ -97,13 +98,10 @@
WARN_ON(!wdog_base);
wdog_clk = of_clk_get(np, 0);
- if (IS_ERR(wdog_clk)) {
+ if (IS_ERR(wdog_clk))
pr_warn("%s: failed to get wdog clock\n", __func__);
- wdog_clk = NULL;
- return;
- }
-
- clk_prepare(wdog_clk);
+ else
+ clk_prepare(wdog_clk);
}
#ifdef CONFIG_CACHE_L2X0
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index bed081e..bf92e5a 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -290,25 +290,20 @@
return 0;
}
-void __init mxc_timer_init(void __iomem *base, int irq)
+static void __init _mxc_timer_init(int irq,
+ struct clk *clk_per, struct clk *clk_ipg)
{
uint32_t tctl_val;
- struct clk *timer_clk;
- struct clk *timer_ipg_clk;
- timer_clk = clk_get_sys("imx-gpt.0", "per");
- if (IS_ERR(timer_clk)) {
+ if (IS_ERR(clk_per)) {
pr_err("i.MX timer: unable to get clk\n");
return;
}
- timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
- if (!IS_ERR(timer_ipg_clk))
- clk_prepare_enable(timer_ipg_clk);
+ if (!IS_ERR(clk_ipg))
+ clk_prepare_enable(clk_ipg);
- clk_prepare_enable(timer_clk);
-
- timer_base = base;
+ clk_prepare_enable(clk_per);
/*
* Initialise to a known state (all timers off, and timing reset)
@@ -325,21 +320,45 @@
__raw_writel(tctl_val, timer_base + MXC_TCTL);
/* init and register the timer to the framework */
- mxc_clocksource_init(timer_clk);
- mxc_clockevent_init(timer_clk);
+ mxc_clocksource_init(clk_per);
+ mxc_clockevent_init(clk_per);
/* Make irqs happen */
setup_irq(irq, &mxc_timer_irq);
}
-void __init mxc_timer_init_dt(struct device_node *np)
+void __init mxc_timer_init(void __iomem *base, int irq)
{
- void __iomem *base;
+ struct clk *clk_per = clk_get_sys("imx-gpt.0", "per");
+ struct clk *clk_ipg = clk_get_sys("imx-gpt.0", "ipg");
+
+ timer_base = base;
+
+ _mxc_timer_init(irq, clk_per, clk_ipg);
+}
+
+static void __init mxc_timer_init_dt(struct device_node *np)
+{
+ struct clk *clk_per, *clk_ipg;
int irq;
- base = of_iomap(np, 0);
- WARN_ON(!base);
+ if (timer_base)
+ return;
+
+ timer_base = of_iomap(np, 0);
+ WARN_ON(!timer_base);
irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(base, irq);
+ clk_per = of_clk_get_by_name(np, "per");
+ clk_ipg = of_clk_get_by_name(np, "ipg");
+
+ _mxc_timer_init(irq, clk_per, clk_ipg);
}
+CLOCKSOURCE_OF_DECLARE(mx1_timer, "fsl,imx1-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx25_timer, "fsl,imx25-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx50_timer, "fsl,imx50-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx51_timer, "fsl,imx51-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx53_timer, "fsl,imx53-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx6q_timer, "fsl,imx6q-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx6sl_timer, "fsl,imx6sl-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx6sx_timer, "fsl,imx6sx-gpt", mxc_timer_init_dt);
diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c
index 7828af4..1d4f384 100644
--- a/arch/arm/mach-imx/tzic.c
+++ b/arch/arm/mach-imx/tzic.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
@@ -153,13 +154,16 @@
* interrupts. It registers the interrupt enable and disable functions
* to the kernel for each interrupt source.
*/
-void __init tzic_init_irq(void __iomem *irqbase)
+void __init tzic_init_irq(void)
{
struct device_node *np;
int irq_base;
int i;
- tzic_base = irqbase;
+ np = of_find_compatible_node(NULL, NULL, "fsl,tzic");
+ tzic_base = of_iomap(np, 0);
+ WARN_ON(!tzic_base);
+
/* put the TZIC into the reset value with
* all interrupts disabled
*/
@@ -181,7 +185,6 @@
irq_base = irq_alloc_descs(-1, 0, TZIC_NUM_IRQS, numa_node_id());
WARN_ON(irq_base < 0);
- np = of_find_compatible_node(NULL, NULL, "fsl,tzic");
domain = irq_domain_add_legacy(np, TZIC_NUM_IRQS, irq_base, 0,
&irq_domain_simple_ops, NULL);
WARN_ON(!domain);
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 660ca6f..8ca290b 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -31,7 +31,7 @@
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <linux/irqchip/versatile-fpga.h>
+#include <linux/irqchip.h>
#include <linux/mtd/physmap.h>
#include <linux/clk.h>
#include <linux/platform_data/clk-integrator.h>
@@ -439,15 +439,10 @@
integrator_clockevent_init(rate, base, irq);
}
-static const struct of_device_id fpga_irq_of_match[] __initconst = {
- { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
- { /* Sentinel */ }
-};
-
static void __init ap_init_irq_of(void)
{
cm_init();
- of_irq_init(fpga_irq_of_match);
+ irqchip_init();
}
/* For the Device Tree, add in the UART callbacks as AUXDATA */
@@ -558,7 +553,6 @@
.map_io = ap_map_io,
.init_early = ap_init_early,
.init_irq = ap_init_irq_of,
- .handle_irq = fpga_handle_irq,
.init_time = ap_of_timer_init,
.init_machine = ap_init_of,
.restart = integrator_restart,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 0e57f8f..5236ebe 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -20,7 +20,7 @@
#include <linux/amba/clcd.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
-#include <linux/irqchip/versatile-fpga.h>
+#include <linux/irqchip.h>
#include <linux/gfp.h>
#include <linux/mtd/physmap.h>
#include <linux/of_irq.h>
@@ -235,15 +235,10 @@
sched_clock_register(intcp_read_sched_clock, 32, 24000000);
}
-static const struct of_device_id fpga_irq_of_match[] __initconst = {
- { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
- { /* Sentinel */ }
-};
-
static void __init intcp_init_irq_of(void)
{
cm_init();
- of_irq_init(fpga_irq_of_match);
+ irqchip_init();
}
/*
@@ -329,7 +324,6 @@
.map_io = intcp_map_io,
.init_early = intcp_init_early,
.init_irq = intcp_init_irq_of,
- .handle_irq = fpga_handle_irq,
.init_machine = intcp_init_of,
.restart = integrator_restart,
.dt_compat = intcp_dt_board_compat,
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
deleted file mode 100644
index df4b263..0000000
--- a/arch/arm/mach-kirkwood/Kconfig
+++ /dev/null
@@ -1,111 +0,0 @@
-if ARCH_KIRKWOOD
-
-menu "Marvell Kirkwood Implementations"
-
-config KIRKWOOD_LEGACY
- bool
-
-config MACH_D2NET_V2
- bool "LaCie d2 Network v2 NAS Board"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- LaCie d2 Network v2 NAS.
-
-config MACH_NET2BIG_V2
- bool "LaCie 2Big Network v2 NAS Board"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- LaCie 2Big Network v2 NAS.
-
-config MACH_NET5BIG_V2
- bool "LaCie 5Big Network v2 NAS Board"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- LaCie 5Big Network v2 NAS.
-
-config MACH_OPENRD
- select KIRKWOOD_LEGACY
- bool
-
-config MACH_OPENRD_BASE
- bool "Marvell OpenRD Base Board"
- select MACH_OPENRD
- help
- Say 'Y' here if you want your kernel to support the
- Marvell OpenRD Base Board.
-
-config MACH_OPENRD_CLIENT
- bool "Marvell OpenRD Client Board"
- select MACH_OPENRD
- help
- Say 'Y' here if you want your kernel to support the
- Marvell OpenRD Client Board.
-
-config MACH_OPENRD_ULTIMATE
- bool "Marvell OpenRD Ultimate Board"
- select MACH_OPENRD
- help
- Say 'Y' here if you want your kernel to support the
- Marvell OpenRD Ultimate Board.
-
-config MACH_RD88F6192_NAS
- bool "Marvell RD-88F6192-NAS Reference Board"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- Marvell RD-88F6192-NAS Reference Board.
-
-config MACH_RD88F6281
- bool "Marvell RD-88F6281 Reference Board"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- Marvell RD-88F6281 Reference Board.
-
-config MACH_T5325
- bool "HP t5325 Thin Client"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- HP t5325 Thin Client.
-
-config MACH_TS219
- bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
- TS-219P+ Turbo NAS devices.
-
-config MACH_TS41X
- bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
- NAS devices.
-
-comment "Device tree entries"
-
-config ARCH_KIRKWOOD_DT
- bool "Marvell Kirkwood Flattened Device Tree"
- select KIRKWOOD_CLK
- select OF_IRQ
- select ORION_IRQCHIP
- select ORION_TIMER
- select POWER_SUPPLY
- select POWER_RESET
- select POWER_RESET_GPIO
- select REGULATOR
- select REGULATOR_FIXED_VOLTAGE
- select USE_OF
- help
- Say 'Y' here if you want your kernel to support the
- Marvell Kirkwood using flattened device tree.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
deleted file mode 100644
index 3a72c5c..0000000
--- a/arch/arm/mach-kirkwood/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o common.o pcie.o
-obj-$(CONFIG_PM) += pm.o
-
-obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
-obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
-obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
-obj-$(CONFIG_MACH_T5325) += t5325-setup.o
-obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
-obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
-
-obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
deleted file mode 100644
index 760a0ef..0000000
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
- zreladdr-y += 0x00008000
-params_phys-y := 0x00000100
-initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
deleted file mode 100644
index ff18ff2..0000000
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-dt.c
- *
- * Flattened Device Tree board initialization
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_net.h>
-#include <linux/of_platform.h>
-#include <linux/dma-mapping.h>
-#include <linux/irqchip.h>
-#include <asm/hardware/cache-feroceon-l2.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/bridge-regs.h>
-#include <plat/common.h>
-#include <plat/pcie.h>
-#include "pm.h"
-
-static struct map_desc kirkwood_io_desc[] __initdata = {
- {
- .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
- .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
- .length = KIRKWOOD_REGS_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-static void __init kirkwood_map_io(void)
-{
- iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
-}
-
-static struct resource kirkwood_cpufreq_resources[] = {
- [0] = {
- .start = CPU_CONTROL_PHYS,
- .end = CPU_CONTROL_PHYS + 3,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device kirkwood_cpufreq_device = {
- .name = "kirkwood-cpufreq",
- .id = -1,
- .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources),
- .resource = kirkwood_cpufreq_resources,
-};
-
-static void __init kirkwood_cpufreq_init(void)
-{
- platform_device_register(&kirkwood_cpufreq_device);
-}
-
-static struct resource kirkwood_cpuidle_resource[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = DDR_OPERATION_BASE,
- .end = DDR_OPERATION_BASE + 3,
- },
-};
-
-static struct platform_device kirkwood_cpuidle = {
- .name = "kirkwood_cpuidle",
- .id = -1,
- .resource = kirkwood_cpuidle_resource,
- .num_resources = 1,
-};
-
-static void __init kirkwood_cpuidle_init(void)
-{
- platform_device_register(&kirkwood_cpuidle);
-}
-
-/* Temporary here since mach-mvebu has a function we can use */
-static void kirkwood_restart(enum reboot_mode mode, const char *cmd)
-{
- /*
- * Enable soft reset to assert RSTOUTn.
- */
- writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
- /*
- * Assert soft reset.
- */
- writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
- while (1)
- ;
-}
-
-#define MV643XX_ETH_MAC_ADDR_LOW 0x0414
-#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418
-
-static void __init kirkwood_dt_eth_fixup(void)
-{
- struct device_node *np;
-
- /*
- * The ethernet interfaces forget the MAC address assigned by u-boot
- * if the clocks are turned off. Usually, u-boot on kirkwood boards
- * has no DT support to properly set local-mac-address property.
- * As a workaround, we get the MAC address from mv643xx_eth registers
- * and update the port device node if no valid MAC address is set.
- */
- for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
- struct device_node *pnp = of_get_parent(np);
- struct clk *clk;
- struct property *pmac;
- void __iomem *io;
- u8 *macaddr;
- u32 reg;
-
- if (!pnp)
- continue;
-
- /* skip disabled nodes or nodes with valid MAC address*/
- if (!of_device_is_available(pnp) || of_get_mac_address(np))
- goto eth_fixup_skip;
-
- clk = of_clk_get(pnp, 0);
- if (IS_ERR(clk))
- goto eth_fixup_skip;
-
- io = of_iomap(pnp, 0);
- if (!io)
- goto eth_fixup_no_map;
-
- /* ensure port clock is not gated to not hang CPU */
- clk_prepare_enable(clk);
-
- /* store MAC address register contents in local-mac-address */
- pr_err(FW_INFO "%s: local-mac-address is not set\n",
- np->full_name);
-
- pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
- if (!pmac)
- goto eth_fixup_no_mem;
-
- pmac->value = pmac + 1;
- pmac->length = 6;
- pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
- if (!pmac->name) {
- kfree(pmac);
- goto eth_fixup_no_mem;
- }
-
- macaddr = pmac->value;
- reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
- macaddr[0] = (reg >> 24) & 0xff;
- macaddr[1] = (reg >> 16) & 0xff;
- macaddr[2] = (reg >> 8) & 0xff;
- macaddr[3] = reg & 0xff;
-
- reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
- macaddr[4] = (reg >> 8) & 0xff;
- macaddr[5] = reg & 0xff;
-
- of_update_property(np, pmac);
-
-eth_fixup_no_mem:
- iounmap(io);
- clk_disable_unprepare(clk);
-eth_fixup_no_map:
- clk_put(clk);
-eth_fixup_skip:
- of_node_put(pnp);
- }
-}
-
-/*
- * Disable propagation of mbus errors to the CPU local bus, as this
- * causes mbus errors (which can occur for example for PCI aborts) to
- * throw CPU aborts, which we're not set up to deal with.
- */
-static void __init kirkwood_disable_mbus_error_propagation(void)
-{
- void __iomem *cpu_config;
-
- cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
- writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
- iounmap(cpu_config);
-}
-
-static void __init kirkwood_dt_init(void)
-{
- kirkwood_disable_mbus_error_propagation();
-
- BUG_ON(mvebu_mbus_dt_init(false));
-
-#ifdef CONFIG_CACHE_FEROCEON_L2
- feroceon_of_init();
-#endif
- kirkwood_cpufreq_init();
- kirkwood_cpuidle_init();
-
- kirkwood_pm_init();
- kirkwood_dt_eth_fixup();
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char * const kirkwood_dt_board_compat[] = {
- "marvell,kirkwood",
- NULL
-};
-
-DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
- /* Maintainer: Jason Cooper <jason@lakedaemon.net> */
- .map_io = kirkwood_map_io,
- .init_machine = kirkwood_dt_init,
- .restart = kirkwood_restart,
- .dt_compat = kirkwood_dt_board_compat,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
deleted file mode 100644
index 255f33a..0000000
--- a/arch/arm/mach-kirkwood/common.c
+++ /dev/null
@@ -1,746 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/common.c
- *
- * Core functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/nand.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk-provider.h>
-#include <linux/spinlock.h>
-#include <linux/mv643xx_i2c.h>
-#include <linux/timex.h>
-#include <linux/kexec.h>
-#include <linux/reboot.h>
-#include <net/dsa.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/cache-feroceon-l2.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
-#include <linux/platform_data/asoc-kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include <linux/platform_data/mtd-orion_nand.h>
-#include <linux/platform_data/usb-ehci-orion.h>
-#include <plat/common.h>
-#include <plat/time.h>
-#include <linux/platform_data/dma-mv_xor.h>
-#include "common.h"
-#include "pm.h"
-
-/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
-#define KIRKWOOD_MBUS_NAND_TARGET 0x01
-#define KIRKWOOD_MBUS_NAND_ATTR 0x2f
-#define KIRKWOOD_MBUS_SRAM_TARGET 0x03
-#define KIRKWOOD_MBUS_SRAM_ATTR 0x01
-
-/*****************************************************************************
- * I/O Address Mapping
- ****************************************************************************/
-static struct map_desc kirkwood_io_desc[] __initdata = {
- {
- .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
- .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
- .length = KIRKWOOD_REGS_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-void __init kirkwood_map_io(void)
-{
- iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
-}
-
-/*****************************************************************************
- * CLK tree
- ****************************************************************************/
-
-static void enable_sata0(void)
-{
- /* Enable PLL and IVREF */
- writel(readl(SATA0_PHY_MODE_2) | 0xf, SATA0_PHY_MODE_2);
- /* Enable PHY */
- writel(readl(SATA0_IF_CTRL) & ~0x200, SATA0_IF_CTRL);
-}
-
-static void disable_sata0(void)
-{
- /* Disable PLL and IVREF */
- writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
- /* Disable PHY */
- writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
-}
-
-static void enable_sata1(void)
-{
- /* Enable PLL and IVREF */
- writel(readl(SATA1_PHY_MODE_2) | 0xf, SATA1_PHY_MODE_2);
- /* Enable PHY */
- writel(readl(SATA1_IF_CTRL) & ~0x200, SATA1_IF_CTRL);
-}
-
-static void disable_sata1(void)
-{
- /* Disable PLL and IVREF */
- writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
- /* Disable PHY */
- writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
-}
-
-static void disable_pcie0(void)
-{
- writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
- while (1)
- if (readl(PCIE_STATUS) & 0x1)
- break;
- writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
-}
-
-static void disable_pcie1(void)
-{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
-
- if (dev == MV88F6282_DEV_ID) {
- writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
- while (1)
- if (readl(PCIE1_STATUS) & 0x1)
- break;
- writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
- }
-}
-
-/* An extended version of the gated clk. This calls fn_en()/fn_dis
- * before enabling/disabling the clock. We use this to turn on/off
- * PHYs etc. */
-struct clk_gate_fn {
- struct clk_gate gate;
- void (*fn_en)(void);
- void (*fn_dis)(void);
-};
-
-#define to_clk_gate_fn(_gate) container_of(_gate, struct clk_gate_fn, gate)
-#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
-
-static int clk_gate_fn_enable(struct clk_hw *hw)
-{
- struct clk_gate *gate = to_clk_gate(hw);
- struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate);
- int ret;
-
- ret = clk_gate_ops.enable(hw);
- if (!ret && gate_fn->fn_en)
- gate_fn->fn_en();
-
- return ret;
-}
-
-static void clk_gate_fn_disable(struct clk_hw *hw)
-{
- struct clk_gate *gate = to_clk_gate(hw);
- struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate);
-
- if (gate_fn->fn_dis)
- gate_fn->fn_dis();
-
- clk_gate_ops.disable(hw);
-}
-
-static struct clk_ops clk_gate_fn_ops;
-
-static struct clk __init *clk_register_gate_fn(struct device *dev,
- const char *name,
- const char *parent_name, unsigned long flags,
- void __iomem *reg, u8 bit_idx,
- u8 clk_gate_flags, spinlock_t *lock,
- void (*fn_en)(void), void (*fn_dis)(void))
-{
- struct clk_gate_fn *gate_fn;
- struct clk *clk;
- struct clk_init_data init;
-
- gate_fn = kzalloc(sizeof(struct clk_gate_fn), GFP_KERNEL);
- if (!gate_fn) {
- pr_err("%s: could not allocate gated clk\n", __func__);
- return ERR_PTR(-ENOMEM);
- }
-
- init.name = name;
- init.ops = &clk_gate_fn_ops;
- init.flags = flags;
- init.parent_names = (parent_name ? &parent_name : NULL);
- init.num_parents = (parent_name ? 1 : 0);
-
- /* struct clk_gate assignments */
- gate_fn->gate.reg = reg;
- gate_fn->gate.bit_idx = bit_idx;
- gate_fn->gate.flags = clk_gate_flags;
- gate_fn->gate.lock = lock;
- gate_fn->gate.hw.init = &init;
- gate_fn->fn_en = fn_en;
- gate_fn->fn_dis = fn_dis;
-
- /* ops is the gate ops, but with our enable/disable functions */
- if (clk_gate_fn_ops.enable != clk_gate_fn_enable ||
- clk_gate_fn_ops.disable != clk_gate_fn_disable) {
- clk_gate_fn_ops = clk_gate_ops;
- clk_gate_fn_ops.enable = clk_gate_fn_enable;
- clk_gate_fn_ops.disable = clk_gate_fn_disable;
- }
-
- clk = clk_register(dev, &gate_fn->gate.hw);
-
- if (IS_ERR(clk))
- kfree(gate_fn);
-
- return clk;
-}
-
-static DEFINE_SPINLOCK(gating_lock);
-static struct clk *tclk;
-
-static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
-{
- return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
- bit_idx, 0, &gating_lock);
-}
-
-static struct clk __init *kirkwood_register_gate_fn(const char *name,
- u8 bit_idx,
- void (*fn_en)(void),
- void (*fn_dis)(void))
-{
- return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
- bit_idx, 0, &gating_lock, fn_en, fn_dis);
-}
-
-static struct clk *ge0, *ge1;
-
-void __init kirkwood_clk_init(void)
-{
- struct clk *runit, *sata0, *sata1, *usb0, *sdio;
- struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
-
- tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
- CLK_IS_ROOT, kirkwood_tclk);
-
- runit = kirkwood_register_gate("runit", CGC_BIT_RUNIT);
- ge0 = kirkwood_register_gate("ge0", CGC_BIT_GE0);
- ge1 = kirkwood_register_gate("ge1", CGC_BIT_GE1);
- sata0 = kirkwood_register_gate_fn("sata0", CGC_BIT_SATA0,
- enable_sata0, disable_sata0);
- sata1 = kirkwood_register_gate_fn("sata1", CGC_BIT_SATA1,
- enable_sata1, disable_sata1);
- usb0 = kirkwood_register_gate("usb0", CGC_BIT_USB0);
- sdio = kirkwood_register_gate("sdio", CGC_BIT_SDIO);
- crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
- xor0 = kirkwood_register_gate("xor0", CGC_BIT_XOR0);
- xor1 = kirkwood_register_gate("xor1", CGC_BIT_XOR1);
- pex0 = kirkwood_register_gate_fn("pex0", CGC_BIT_PEX0,
- NULL, disable_pcie0);
- pex1 = kirkwood_register_gate_fn("pex1", CGC_BIT_PEX1,
- NULL, disable_pcie1);
- audio = kirkwood_register_gate("audio", CGC_BIT_AUDIO);
- kirkwood_register_gate("tdm", CGC_BIT_TDM);
- kirkwood_register_gate("tsu", CGC_BIT_TSU);
-
- /* clkdev entries, mapping clks to devices */
- orion_clkdev_add(NULL, "orion_spi.0", runit);
- orion_clkdev_add(NULL, "orion_spi.1", runit);
- orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge0);
- orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", ge1);
- orion_clkdev_add(NULL, "orion_wdt", tclk);
- orion_clkdev_add("0", "sata_mv.0", sata0);
- orion_clkdev_add("1", "sata_mv.0", sata1);
- orion_clkdev_add(NULL, "orion-ehci.0", usb0);
- orion_clkdev_add(NULL, "orion_nand", runit);
- orion_clkdev_add(NULL, "mvsdio", sdio);
- orion_clkdev_add(NULL, "mv_crypto", crypto);
- orion_clkdev_add(NULL, MV_XOR_NAME ".0", xor0);
- orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1);
- orion_clkdev_add("0", "pcie", pex0);
- orion_clkdev_add("1", "pcie", pex1);
- orion_clkdev_add(NULL, "mvebu-audio", audio);
- orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit);
- orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit);
-
- /* Marvell says runit is used by SPI, UART, NAND, TWSI, ...,
- * so should never be gated.
- */
- clk_prepare_enable(runit);
-}
-
-/*****************************************************************************
- * EHCI0
- ****************************************************************************/
-void __init kirkwood_ehci_init(void)
-{
- orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
-}
-
-
-/*****************************************************************************
- * GE00
- ****************************************************************************/
-void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
-{
- orion_ge00_init(eth_data,
- GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
- IRQ_KIRKWOOD_GE00_ERR, 1600);
- /* The interface forgets the MAC address assigned by u-boot if
- the clock is turned off, so claim the clk now. */
- clk_prepare_enable(ge0);
-}
-
-
-/*****************************************************************************
- * GE01
- ****************************************************************************/
-void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
-{
- orion_ge01_init(eth_data,
- GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
- IRQ_KIRKWOOD_GE01_ERR, 1600);
- clk_prepare_enable(ge1);
-}
-
-
-/*****************************************************************************
- * Ethernet switch
- ****************************************************************************/
-void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
-{
- orion_ge00_switch_init(d, irq);
-}
-
-
-/*****************************************************************************
- * NAND flash
- ****************************************************************************/
-static struct resource kirkwood_nand_resource = {
- .flags = IORESOURCE_MEM,
- .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
- .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
- KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data kirkwood_nand_data = {
- .cle = 0,
- .ale = 1,
- .width = 8,
-};
-
-static struct platform_device kirkwood_nand_flash = {
- .name = "orion_nand",
- .id = -1,
- .dev = {
- .platform_data = &kirkwood_nand_data,
- },
- .resource = &kirkwood_nand_resource,
- .num_resources = 1,
-};
-
-void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
- int chip_delay)
-{
- kirkwood_nand_data.parts = parts;
- kirkwood_nand_data.nr_parts = nr_parts;
- kirkwood_nand_data.chip_delay = chip_delay;
- platform_device_register(&kirkwood_nand_flash);
-}
-
-void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
- int (*dev_ready)(struct mtd_info *))
-{
- kirkwood_nand_data.parts = parts;
- kirkwood_nand_data.nr_parts = nr_parts;
- kirkwood_nand_data.dev_ready = dev_ready;
- platform_device_register(&kirkwood_nand_flash);
-}
-
-/*****************************************************************************
- * SoC RTC
- ****************************************************************************/
-static void __init kirkwood_rtc_init(void)
-{
- orion_rtc_init(RTC_PHYS_BASE, IRQ_KIRKWOOD_RTC);
-}
-
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
-{
- orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA);
-}
-
-
-/*****************************************************************************
- * SD/SDIO/MMC
- ****************************************************************************/
-static struct resource mvsdio_resources[] = {
- [0] = {
- .start = SDIO_PHYS_BASE,
- .end = SDIO_PHYS_BASE + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_KIRKWOOD_SDIO,
- .end = IRQ_KIRKWOOD_SDIO,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 mvsdio_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device kirkwood_sdio = {
- .name = "mvsdio",
- .id = -1,
- .dev = {
- .dma_mask = &mvsdio_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(mvsdio_resources),
- .resource = mvsdio_resources,
-};
-
-void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
-{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
- if (rev == 0 && dev != MV88F6282_DEV_ID) /* catch all Kirkwood Z0's */
- mvsdio_data->clock = 100000000;
- else
- mvsdio_data->clock = 200000000;
- kirkwood_sdio.dev.platform_data = mvsdio_data;
- platform_device_register(&kirkwood_sdio);
-}
-
-
-/*****************************************************************************
- * SPI
- ****************************************************************************/
-void __init kirkwood_spi_init(void)
-{
- orion_spi_init(SPI_PHYS_BASE);
-}
-
-
-/*****************************************************************************
- * I2C
- ****************************************************************************/
-void __init kirkwood_i2c_init(void)
-{
- orion_i2c_init(I2C_PHYS_BASE, IRQ_KIRKWOOD_TWSI, 8);
-}
-
-
-/*****************************************************************************
- * UART0
- ****************************************************************************/
-
-void __init kirkwood_uart0_init(void)
-{
- orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
- IRQ_KIRKWOOD_UART_0, tclk);
-}
-
-
-/*****************************************************************************
- * UART1
- ****************************************************************************/
-void __init kirkwood_uart1_init(void)
-{
- orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
- IRQ_KIRKWOOD_UART_1, tclk);
-}
-
-/*****************************************************************************
- * Cryptographic Engines and Security Accelerator (CESA)
- ****************************************************************************/
-void __init kirkwood_crypto_init(void)
-{
- orion_crypto_init(CRYPTO_PHYS_BASE, KIRKWOOD_SRAM_PHYS_BASE,
- KIRKWOOD_SRAM_SIZE, IRQ_KIRKWOOD_CRYPTO);
-}
-
-
-/*****************************************************************************
- * XOR0
- ****************************************************************************/
-void __init kirkwood_xor0_init(void)
-{
- orion_xor0_init(XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE,
- IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01);
-}
-
-
-/*****************************************************************************
- * XOR1
- ****************************************************************************/
-void __init kirkwood_xor1_init(void)
-{
- orion_xor1_init(XOR1_PHYS_BASE, XOR1_HIGH_PHYS_BASE,
- IRQ_KIRKWOOD_XOR_10, IRQ_KIRKWOOD_XOR_11);
-}
-
-
-/*****************************************************************************
- * Watchdog
- ****************************************************************************/
-void __init kirkwood_wdt_init(void)
-{
- orion_wdt_init();
-}
-
-/*****************************************************************************
- * CPU idle
- ****************************************************************************/
-static struct resource kirkwood_cpuidle_resource[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = DDR_OPERATION_BASE,
- .end = DDR_OPERATION_BASE + 3,
- },
-};
-
-static struct platform_device kirkwood_cpuidle = {
- .name = "kirkwood_cpuidle",
- .id = -1,
- .resource = kirkwood_cpuidle_resource,
- .num_resources = 1,
-};
-
-void __init kirkwood_cpuidle_init(void)
-{
- platform_device_register(&kirkwood_cpuidle);
-}
-
-/*****************************************************************************
- * Time handling
- ****************************************************************************/
-void __init kirkwood_init_early(void)
-{
- orion_time_set_base(TIMER_VIRT_BASE);
-}
-
-int kirkwood_tclk;
-
-static int __init kirkwood_find_tclk(void)
-{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
-
- if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
- if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
- return 200000000;
-
- return 166666667;
-}
-
-void __init kirkwood_timer_init(void)
-{
- kirkwood_tclk = kirkwood_find_tclk();
-
- orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
- IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-/*****************************************************************************
- * Audio
- ****************************************************************************/
-static struct resource kirkwood_audio_resources[] = {
- [0] = {
- .start = AUDIO_PHYS_BASE,
- .end = AUDIO_PHYS_BASE + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_KIRKWOOD_I2S,
- .end = IRQ_KIRKWOOD_I2S,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct kirkwood_asoc_platform_data kirkwood_audio_data = {
- .burst = 128,
-};
-
-static struct platform_device kirkwood_audio_device = {
- .name = "mvebu-audio",
- .id = -1,
- .num_resources = ARRAY_SIZE(kirkwood_audio_resources),
- .resource = kirkwood_audio_resources,
- .dev = {
- .platform_data = &kirkwood_audio_data,
- },
-};
-
-void __init kirkwood_audio_init(void)
-{
- platform_device_register(&kirkwood_audio_device);
-}
-
-/*****************************************************************************
- * CPU Frequency
- ****************************************************************************/
-static struct resource kirkwood_cpufreq_resources[] = {
- [0] = {
- .start = CPU_CONTROL_PHYS,
- .end = CPU_CONTROL_PHYS + 3,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device kirkwood_cpufreq_device = {
- .name = "kirkwood-cpufreq",
- .id = -1,
- .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources),
- .resource = kirkwood_cpufreq_resources,
-};
-
-void __init kirkwood_cpufreq_init(void)
-{
- platform_device_register(&kirkwood_cpufreq_device);
-}
-
-/*****************************************************************************
- * General
- ****************************************************************************/
-/*
- * Identify device ID and revision.
- */
-char * __init kirkwood_id(void)
-{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
-
- if (dev == MV88F6281_DEV_ID) {
- if (rev == MV88F6281_REV_Z0)
- return "MV88F6281-Z0";
- else if (rev == MV88F6281_REV_A0)
- return "MV88F6281-A0";
- else if (rev == MV88F6281_REV_A1)
- return "MV88F6281-A1";
- else
- return "MV88F6281-Rev-Unsupported";
- } else if (dev == MV88F6192_DEV_ID) {
- if (rev == MV88F6192_REV_Z0)
- return "MV88F6192-Z0";
- else if (rev == MV88F6192_REV_A0)
- return "MV88F6192-A0";
- else if (rev == MV88F6192_REV_A1)
- return "MV88F6192-A1";
- else
- return "MV88F6192-Rev-Unsupported";
- } else if (dev == MV88F6180_DEV_ID) {
- if (rev == MV88F6180_REV_A0)
- return "MV88F6180-Rev-A0";
- else if (rev == MV88F6180_REV_A1)
- return "MV88F6180-Rev-A1";
- else
- return "MV88F6180-Rev-Unsupported";
- } else if (dev == MV88F6282_DEV_ID) {
- if (rev == MV88F6282_REV_A0)
- return "MV88F6282-Rev-A0";
- else if (rev == MV88F6282_REV_A1)
- return "MV88F6282-Rev-A1";
- else
- return "MV88F6282-Rev-Unsupported";
- } else {
- return "Device-Unknown";
- }
-}
-
-void __init kirkwood_setup_wins(void)
-{
- mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET,
- KIRKWOOD_MBUS_NAND_ATTR,
- KIRKWOOD_NAND_MEM_PHYS_BASE,
- KIRKWOOD_NAND_MEM_SIZE);
- mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET,
- KIRKWOOD_MBUS_SRAM_ATTR,
- KIRKWOOD_SRAM_PHYS_BASE,
- KIRKWOOD_SRAM_SIZE);
-}
-
-void __init kirkwood_l2_init(void)
-{
-#ifdef CONFIG_CACHE_FEROCEON_L2
-#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
- writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
- feroceon_l2_init(1);
-#else
- writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
- feroceon_l2_init(0);
-#endif
-#endif
-}
-
-void __init kirkwood_init(void)
-{
- pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
-
- /*
- * Disable propagation of mbus errors to the CPU local bus,
- * as this causes mbus errors (which can occur for example
- * for PCI aborts) to throw CPU aborts, which we're not set
- * up to deal with.
- */
- writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
-
- BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus",
- BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
- DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ));
-
- kirkwood_setup_wins();
-
- kirkwood_l2_init();
-
- /* Setup root of clk tree */
- kirkwood_clk_init();
-
- /* internal devices that every board has */
- kirkwood_rtc_init();
- kirkwood_wdt_init();
- kirkwood_xor0_init();
- kirkwood_xor1_init();
- kirkwood_crypto_init();
-
- kirkwood_pm_init();
- kirkwood_cpuidle_init();
-#ifdef CONFIG_KEXEC
- kexec_reinit = kirkwood_enable_pcie;
-#endif
-}
-
-void kirkwood_restart(enum reboot_mode mode, const char *cmd)
-{
- /*
- * Enable soft reset to assert RSTOUTn.
- */
- writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
- /*
- * Assert soft reset.
- */
- writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
- while (1)
- ;
-}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
deleted file mode 100644
index 832a4e2..0000000
--- a/arch/arm/mach-kirkwood/common.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/common.h
- *
- * Core functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_KIRKWOOD_COMMON_H
-#define __ARCH_KIRKWOOD_COMMON_H
-
-#include <linux/reboot.h>
-
-struct dsa_platform_data;
-struct mv643xx_eth_platform_data;
-struct mv_sata_platform_data;
-struct mvsdio_platform_data;
-struct mtd_partition;
-struct mtd_info;
-struct kirkwood_asoc_platform_data;
-
-#define KW_PCIE0 (1 << 0)
-#define KW_PCIE1 (1 << 1)
-
-/*
- * Basic Kirkwood init functions used early by machine-setup.
- */
-void kirkwood_map_io(void);
-void kirkwood_init(void);
-void kirkwood_init_early(void);
-void kirkwood_init_irq(void);
-
-void kirkwood_setup_wins(void);
-
-void kirkwood_enable_pcie(void);
-void kirkwood_pcie_id(u32 *dev, u32 *rev);
-
-void kirkwood_ehci_init(void);
-void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
-void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
-void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
-void kirkwood_pcie_init(unsigned int portmask);
-void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
-void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
-void kirkwood_spi_init(void);
-void kirkwood_i2c_init(void);
-void kirkwood_uart0_init(void);
-void kirkwood_uart1_init(void);
-void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
-void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
- int (*dev_ready)(struct mtd_info *));
-void kirkwood_audio_init(void);
-void kirkwood_cpuidle_init(void);
-void kirkwood_cpufreq_init(void);
-
-void kirkwood_restart(enum reboot_mode, const char *);
-void kirkwood_clk_init(void);
-
-/* early init functions not converted to fdt yet */
-char *kirkwood_id(void);
-void kirkwood_l2_init(void);
-void kirkwood_wdt_init(void);
-void kirkwood_xor0_init(void);
-void kirkwood_xor1_init(void);
-void kirkwood_crypto_init(void);
-
-extern int kirkwood_tclk;
-extern void kirkwood_timer_init(void);
-
-#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-
-#endif
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
deleted file mode 100644
index 4534180..0000000
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/d2net_v2-setup.c
- *
- * LaCie d2 Network Space v2 Board Setup
- *
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/leds-kirkwood-ns2.h>
-#include "common.h"
-#include "mpp.h"
-#include "lacie_v2-common.h"
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data d2net_v2_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data d2net_v2_sata_data = {
- .n_ports = 2,
-};
-
-/*****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define D2NET_V2_GPIO_PUSH_BUTTON 34
-#define D2NET_V2_GPIO_POWER_SWITCH_ON 13
-#define D2NET_V2_GPIO_POWER_SWITCH_OFF 15
-
-#define D2NET_V2_SWITCH_POWER_ON 0x1
-#define D2NET_V2_SWITCH_POWER_OFF 0x2
-
-static struct gpio_keys_button d2net_v2_buttons[] = {
- [0] = {
- .type = EV_SW,
- .code = D2NET_V2_SWITCH_POWER_ON,
- .gpio = D2NET_V2_GPIO_POWER_SWITCH_ON,
- .desc = "Back power switch (on|auto)",
- .active_low = 0,
- },
- [1] = {
- .type = EV_SW,
- .code = D2NET_V2_SWITCH_POWER_OFF,
- .gpio = D2NET_V2_GPIO_POWER_SWITCH_OFF,
- .desc = "Back power switch (auto|off)",
- .active_low = 0,
- },
- [2] = {
- .code = KEY_POWER,
- .gpio = D2NET_V2_GPIO_PUSH_BUTTON,
- .desc = "Front Push Button",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data d2net_v2_button_data = {
- .buttons = d2net_v2_buttons,
- .nbuttons = ARRAY_SIZE(d2net_v2_buttons),
-};
-
-static struct platform_device d2net_v2_gpio_buttons = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &d2net_v2_button_data,
- },
-};
-
-/*****************************************************************************
- * GPIO LEDs
- ****************************************************************************/
-
-#define D2NET_V2_GPIO_RED_LED 12
-
-static struct gpio_led d2net_v2_gpio_led_pins[] = {
- {
- .name = "d2net_v2:red:fail",
- .gpio = D2NET_V2_GPIO_RED_LED,
- },
-};
-
-static struct gpio_led_platform_data d2net_v2_gpio_leds_data = {
- .num_leds = ARRAY_SIZE(d2net_v2_gpio_led_pins),
- .leds = d2net_v2_gpio_led_pins,
-};
-
-static struct platform_device d2net_v2_gpio_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &d2net_v2_gpio_leds_data,
- },
-};
-
-/*****************************************************************************
- * Dual-GPIO CPLD LEDs
- ****************************************************************************/
-
-#define D2NET_V2_GPIO_BLUE_LED_SLOW 29
-#define D2NET_V2_GPIO_BLUE_LED_CMD 30
-
-static struct ns2_led d2net_v2_led_pins[] = {
- {
- .name = "d2net_v2:blue:sata",
- .cmd = D2NET_V2_GPIO_BLUE_LED_CMD,
- .slow = D2NET_V2_GPIO_BLUE_LED_SLOW,
- },
-};
-
-static struct ns2_led_platform_data d2net_v2_leds_data = {
- .num_leds = ARRAY_SIZE(d2net_v2_led_pins),
- .leds = d2net_v2_led_pins,
-};
-
-static struct platform_device d2net_v2_leds = {
- .name = "leds-ns2",
- .id = -1,
- .dev = {
- .platform_data = &d2net_v2_leds_data,
- },
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int d2net_v2_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP6_SYSRST_OUTn,
- MPP7_GPO, /* Request power-off */
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP12_GPO, /* Red led */
- MPP13_GPIO, /* Rear power switch (on|auto) */
- MPP14_GPIO, /* USB fuse */
- MPP15_GPIO, /* Rear power switch (auto|off) */
- MPP16_GPIO, /* SATA 0 power */
- MPP21_SATA0_ACTn,
- MPP24_GPIO, /* USB mode select */
- MPP26_GPIO, /* USB device vbus */
- MPP28_GPIO, /* USB enable host vbus */
- MPP29_GPIO, /* Blue led (slow register) */
- MPP30_GPIO, /* Blue led (command register) */
- MPP34_GPIO, /* Power button (1 = Released, 0 = Pushed) */
- MPP35_GPIO, /* Inhibit power-off */
- 0
-};
-
-#define D2NET_V2_GPIO_POWER_OFF 7
-
-static void d2net_v2_power_off(void)
-{
- gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1);
-}
-
-static void __init d2net_v2_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(d2net_v2_mpp_config);
-
- lacie_v2_hdd_power_init(1);
-
- kirkwood_ehci_init();
- kirkwood_ge00_init(&d2net_v2_ge00_data);
- kirkwood_sata_init(&d2net_v2_sata_data);
- kirkwood_uart0_init();
- lacie_v2_register_flash();
- lacie_v2_register_i2c_devices();
-
- platform_device_register(&d2net_v2_leds);
- platform_device_register(&d2net_v2_gpio_leds);
- platform_device_register(&d2net_v2_gpio_buttons);
-
- if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 &&
- gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = d2net_v2_power_off;
- else
- pr_err("d2net_v2: failed to configure power-off GPIO\n");
-}
-
-MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
- .atag_offset = 0x100,
- .init_machine = d2net_v2_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
deleted file mode 100644
index 1c37082..0000000
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/bridge-regs.h
- *
- * Mbus-L to Mbus Bridge Registers
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_BRIDGE_REGS_H
-#define __ASM_ARCH_BRIDGE_REGS_H
-
-#include <mach/kirkwood.h>
-
-#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100)
-#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100)
-#define CPU_CONFIG_ERROR_PROP 0x00000004
-
-#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
-#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104)
-#define CPU_RESET 0x00000002
-
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
-#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
-#define SOFT_RESET 0x00000001
-
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110)
-
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
-#define IRQ_CAUSE_LOW_OFF 0x0000
-#define IRQ_MASK_LOW_OFF 0x0004
-#define IRQ_CAUSE_HIGH_OFF 0x0010
-#define IRQ_MASK_HIGH_OFF 0x0014
-
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
-#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
-
-#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128)
-#define L2_WRITETHROUGH 0x00000010
-
-#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c)
-#define CGC_BIT_GE0 (0)
-#define CGC_BIT_PEX0 (2)
-#define CGC_BIT_USB0 (3)
-#define CGC_BIT_SDIO (4)
-#define CGC_BIT_TSU (5)
-#define CGC_BIT_DUNIT (6)
-#define CGC_BIT_RUNIT (7)
-#define CGC_BIT_XOR0 (8)
-#define CGC_BIT_AUDIO (9)
-#define CGC_BIT_SATA0 (14)
-#define CGC_BIT_SATA1 (15)
-#define CGC_BIT_XOR1 (16)
-#define CGC_BIT_CRYPTO (17)
-#define CGC_BIT_PEX1 (18)
-#define CGC_BIT_GE1 (19)
-#define CGC_BIT_TDM (20)
-#define CGC_GE0 (1 << 0)
-#define CGC_PEX0 (1 << 2)
-#define CGC_USB0 (1 << 3)
-#define CGC_SDIO (1 << 4)
-#define CGC_TSU (1 << 5)
-#define CGC_DUNIT (1 << 6)
-#define CGC_RUNIT (1 << 7)
-#define CGC_XOR0 (1 << 8)
-#define CGC_AUDIO (1 << 9)
-#define CGC_POWERSAVE (1 << 11)
-#define CGC_SATA0 (1 << 14)
-#define CGC_SATA1 (1 << 15)
-#define CGC_XOR1 (1 << 16)
-#define CGC_CRYPTO (1 << 17)
-#define CGC_PEX1 (1 << 18)
-#define CGC_GE1 (1 << 19)
-#define CGC_TDM (1 << 20)
-#define CGC_RESERVED (0x6 << 21)
-
-#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118)
-#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118)
-
-#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
deleted file mode 100644
index 82db29f..0000000
--- a/arch/arm/mach-kirkwood/include/mach/entry-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Kirkwood platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IRQ_VIRT_BASE
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- @ check low interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
- ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
- mov \irqnr, #31
- ands \irqstat, \irqstat, \tmp
- bne 1001f
-
- @ if no low interrupts set, check high interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
- ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF]
- mov \irqnr, #63
- ands \irqstat, \irqstat, \tmp
-
- @ find first active interrupt source
-1001: clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
- .endm
diff --git a/arch/arm/mach-kirkwood/include/mach/hardware.h b/arch/arm/mach-kirkwood/include/mach/hardware.h
deleted file mode 100644
index 742b74f..0000000
--- a/arch/arm/mach-kirkwood/include/mach/hardware.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "kirkwood.h"
-
-#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
deleted file mode 100644
index 2bf8161..0000000
--- a/arch/arm/mach-kirkwood/include/mach/irqs.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/irqs.h
- *
- * IRQ definitions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/*
- * Low Interrupt Controller
- */
-#define IRQ_KIRKWOOD_HIGH_SUM 0
-#define IRQ_KIRKWOOD_BRIDGE 1
-#define IRQ_KIRKWOOD_HOST2CPU 2
-#define IRQ_KIRKWOOD_CPU2HOST 3
-#define IRQ_KIRKWOOD_XOR_00 5
-#define IRQ_KIRKWOOD_XOR_01 6
-#define IRQ_KIRKWOOD_XOR_10 7
-#define IRQ_KIRKWOOD_XOR_11 8
-#define IRQ_KIRKWOOD_PCIE 9
-#define IRQ_KIRKWOOD_PCIE1 10
-#define IRQ_KIRKWOOD_GE00_SUM 11
-#define IRQ_KIRKWOOD_GE01_SUM 15
-#define IRQ_KIRKWOOD_USB 19
-#define IRQ_KIRKWOOD_SATA 21
-#define IRQ_KIRKWOOD_CRYPTO 22
-#define IRQ_KIRKWOOD_SPI 23
-#define IRQ_KIRKWOOD_I2S 24
-#define IRQ_KIRKWOOD_TS_0 26
-#define IRQ_KIRKWOOD_SDIO 28
-#define IRQ_KIRKWOOD_TWSI 29
-#define IRQ_KIRKWOOD_AVB 30
-#define IRQ_KIRKWOOD_TDMI 31
-
-/*
- * High Interrupt Controller
- */
-#define IRQ_KIRKWOOD_UART_0 33
-#define IRQ_KIRKWOOD_UART_1 34
-#define IRQ_KIRKWOOD_GPIO_LOW_0_7 35
-#define IRQ_KIRKWOOD_GPIO_LOW_8_15 36
-#define IRQ_KIRKWOOD_GPIO_LOW_16_23 37
-#define IRQ_KIRKWOOD_GPIO_LOW_24_31 38
-#define IRQ_KIRKWOOD_GPIO_HIGH_0_7 39
-#define IRQ_KIRKWOOD_GPIO_HIGH_8_15 40
-#define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41
-#define IRQ_KIRKWOOD_GE00_ERR 46
-#define IRQ_KIRKWOOD_GE01_ERR 47
-#define IRQ_KIRKWOOD_RTC 53
-
-/*
- * KIRKWOOD General Purpose Pins
- */
-#define IRQ_KIRKWOOD_GPIO_START 64
-#define NR_GPIO_IRQS 50
-
-#define NR_IRQS (IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
deleted file mode 100644
index 92976ce..0000000
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/kirkwood.h
- *
- * Generic definitions for Marvell Kirkwood SoC flavors:
- * 88F6180, 88F6192 and 88F6281.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_KIRKWOOD_H
-#define __ASM_ARCH_KIRKWOOD_H
-
-/*
- * Marvell Kirkwood address maps.
- *
- * phys
- * e0000000 PCIe #0 Memory space
- * e8000000 PCIe #1 Memory space
- * f1000000 on-chip peripheral registers
- * f2000000 PCIe #0 I/O space
- * f3000000 PCIe #1 I/O space
- * f4000000 NAND controller address window
- * f5000000 Security Accelerator SRAM
- *
- * virt phys size
- * fed00000 f1000000 1M on-chip peripheral registers
- * fee00000 f2000000 1M PCIe #0 I/O space
- * fef00000 f3000000 1M PCIe #1 I/O space
- */
-
-#define KIRKWOOD_SRAM_PHYS_BASE 0xf5000000
-#define KIRKWOOD_SRAM_SIZE SZ_2K
-
-#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf4000000
-#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
-
-#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
-#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000
-#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K
-
-#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
-#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
-#define KIRKWOOD_PCIE_IO_SIZE SZ_64K
-
-#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000)
-#define KIRKWOOD_REGS_SIZE SZ_1M
-
-#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
-#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000
-#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
-
-#define KIRKWOOD_PCIE1_MEM_PHYS_BASE 0xe8000000
-#define KIRKWOOD_PCIE1_MEM_BUS_BASE 0xe8000000
-#define KIRKWOOD_PCIE1_MEM_SIZE SZ_128M
-
-/*
- * Register Map
- */
-#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
-#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
-#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500)
-#define DDR_WINDOW_CPU_SZ (0x20)
-#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
-
-#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
-#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000)
-#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030)
-#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034)
-#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100)
-#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140)
-#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300)
-#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600)
-#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000)
-#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000)
-#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000)
-#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100)
-#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100)
-
-#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000)
-#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
-#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE)
-#define BRIDGE_WINS_SZ (0x80)
-
-#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000)
-
-#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000)
-#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70)
-#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04)
-#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000)
-#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70)
-#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04)
-
-#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000)
-
-#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800)
-#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800)
-#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900)
-#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900)
-#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
-#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
-#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
-#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
-
-#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000)
-#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000)
-
-#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000)
-#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000)
-#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050)
-#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330)
-#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050)
-#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330)
-
-#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000)
-
-#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
-#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
-
-/*
- * Supported devices and revisions.
- */
-#define MV88F6281_DEV_ID 0x6281
-#define MV88F6281_REV_Z0 0
-#define MV88F6281_REV_A0 2
-#define MV88F6281_REV_A1 3
-
-#define MV88F6192_DEV_ID 0x6192
-#define MV88F6192_REV_Z0 0
-#define MV88F6192_REV_A0 2
-#define MV88F6192_REV_A1 3
-
-#define MV88F6180_DEV_ID 0x6180
-#define MV88F6180_REV_A0 2
-#define MV88F6180_REV_A1 3
-
-#define MV88F6282_DEV_ID 0x6282
-#define MV88F6282_REV_A0 0
-#define MV88F6282_REV_A1 1
-#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h
deleted file mode 100644
index 5bca553..0000000
--- a/arch/arm/mach-kirkwood/include/mach/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/kirkwood.h>
-
-#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
- unsigned char *base = SERIAL_BASE;
- int i;
-
- for (i = 0; i < 0x1000; i++) {
- if (base[UART_LSR << 2] & UART_LSR_THRE)
- break;
- barrier();
- }
-
- base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
- unsigned char *base = SERIAL_BASE;
- unsigned char mask;
- int i;
-
- mask = UART_LSR_TEMT | UART_LSR_THRE;
-
- for (i = 0; i < 0x1000; i++) {
- if ((base[UART_LSR << 2] & mask) == mask)
- break;
- barrier();
- }
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
deleted file mode 100644
index 2c47a8a..0000000
--- a/arch/arm/mach-kirkwood/irq.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/irq.c
- *
- * Kirkwood IRQ handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/exception.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/bridge-regs.h>
-#include <plat/orion-gpio.h>
-#include <plat/irq.h>
-#include "common.h"
-
-static int __initdata gpio0_irqs[4] = {
- IRQ_KIRKWOOD_GPIO_LOW_0_7,
- IRQ_KIRKWOOD_GPIO_LOW_8_15,
- IRQ_KIRKWOOD_GPIO_LOW_16_23,
- IRQ_KIRKWOOD_GPIO_LOW_24_31,
-};
-
-static int __initdata gpio1_irqs[4] = {
- IRQ_KIRKWOOD_GPIO_HIGH_0_7,
- IRQ_KIRKWOOD_GPIO_HIGH_8_15,
- IRQ_KIRKWOOD_GPIO_HIGH_16_23,
- 0,
-};
-
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- */
-
-static void __iomem *kirkwood_irq_base = IRQ_VIRT_BASE;
-
-asmlinkage void
-__exception_irq_entry kirkwood_legacy_handle_irq(struct pt_regs *regs)
-{
- u32 stat;
-
- stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_LOW_OFF);
- stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_LOW_OFF);
- if (stat) {
- unsigned int hwirq = __fls(stat);
- handle_IRQ(hwirq, regs);
- return;
- }
- stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_HIGH_OFF);
- stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_HIGH_OFF);
- if (stat) {
- unsigned int hwirq = 32 + __fls(stat);
- handle_IRQ(hwirq, regs);
- return;
- }
-}
-#endif
-
-void __init kirkwood_init_irq(void)
-{
- orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
- orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
-
-#ifdef CONFIG_MULTI_IRQ_HANDLER
- set_handle_irq(kirkwood_legacy_handle_irq);
-#endif
-
- /*
- * Initialize gpiolib for GPIOs 0-49.
- */
- orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0,
- IRQ_KIRKWOOD_GPIO_START, gpio0_irqs);
- orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0,
- IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs);
-}
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
deleted file mode 100644
index 8e3e433..0000000
--- a/arch/arm/mach-kirkwood/lacie_v2-common.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/lacie_v2-common.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
-#include <linux/gpio.h>
-#include <asm/mach/time.h>
-#include <mach/kirkwood.h>
-#include <mach/irqs.h>
-#include <plat/time.h>
-#include "common.h"
-#include "lacie_v2-common.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition lacie_v2_flash_parts[] = {
- {
- .name = "u-boot",
- .size = MTDPART_SIZ_FULL,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
-};
-
-static const struct flash_platform_data lacie_v2_flash = {
- .type = "mx25l4005a",
- .name = "spi_flash",
- .parts = lacie_v2_flash_parts,
- .nr_parts = ARRAY_SIZE(lacie_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &lacie_v2_flash,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-void __init lacie_v2_register_flash(void)
-{
- spi_register_board_info(lacie_v2_spi_slave_info,
- ARRAY_SIZE(lacie_v2_spi_slave_info));
- kirkwood_spi_init();
-}
-
-/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
- .byte_len = SZ_4K / 8,
- .page_size = 16,
-};
-
-/*
- * i2c addr | chip | description
- * 0x50 | HT24LC04 | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata lacie_v2_i2c_info[] = {
- {
- I2C_BOARD_INFO("24c04", 0x50),
- .platform_data = &at24c04,
- }
-};
-
-void __init lacie_v2_register_i2c_devices(void)
-{
- kirkwood_i2c_init();
- i2c_register_board_info(0, lacie_v2_i2c_info,
- ARRAY_SIZE(lacie_v2_i2c_info));
-}
-
-/*****************************************************************************
- * Hard Disk power
- ****************************************************************************/
-
-static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
-
-void __init lacie_v2_hdd_power_init(int hdd_num)
-{
- int i;
- int err;
-
- /* Power up all hard disks. */
- for (i = 0; i < hdd_num; i++) {
- err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL);
- if (err == 0) {
- err = gpio_direction_output(
- lacie_v2_gpio_hdd_power[i], 1);
- /* Free the HDD power GPIOs. This allow user-space to
- * configure them via the gpiolib sysfs interface. */
- gpio_free(lacie_v2_gpio_hdd_power[i]);
- }
- if (err)
- pr_err("Failed to power up HDD%d\n", i + 1);
- }
-}
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h
deleted file mode 100644
index fc64f57..0000000
--- a/arch/arm/mach-kirkwood/lacie_v2-common.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/lacie_v2-common.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
-#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
-
-void lacie_v2_register_flash(void);
-void lacie_v2_register_i2c_devices(void);
-void lacie_v2_hdd_power_init(int hdd_num);
-
-#endif
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
deleted file mode 100644
index e96fd71..0000000
--- a/arch/arm/mach-kirkwood/mpp.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/mpp.c
- *
- * MPP functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <plat/mpp.h>
-#include "common.h"
-#include "mpp.h"
-
-static unsigned int __init kirkwood_variant(void)
-{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
-
- if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0)
- return MPP_F6281_MASK;
- if (dev == MV88F6282_DEV_ID)
- return MPP_F6282_MASK;
- if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0)
- return MPP_F6192_MASK;
- if (dev == MV88F6180_DEV_ID)
- return MPP_F6180_MASK;
-
- pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n",
- dev, rev);
- return 0;
-}
-
-void __init kirkwood_mpp_conf(unsigned int *mpp_list)
-{
- orion_mpp_conf(mpp_list, kirkwood_variant(),
- MPP_MAX, DEV_BUS_VIRT_BASE);
-}
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
deleted file mode 100644
index d5a0d1d..0000000
--- a/arch/arm/mach-kirkwood/mpp.h
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- * linux/arch/arm/mach-kirkwood/mpp.h -- Multi Purpose Pins
- *
- * Copyright 2009: Marvell Technology Group Ltd.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __KIRKWOOD_MPP_H
-#define __KIRKWOOD_MPP_H
-
-#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281, _F6282) ( \
- /* MPP number */ ((_num) & 0xff) | \
- /* MPP select value */ (((_sel) & 0xf) << 8) | \
- /* may be input signal */ ((!!(_in)) << 12) | \
- /* may be output signal */ ((!!(_out)) << 13) | \
- /* available on F6180 */ ((!!(_F6180)) << 14) | \
- /* available on F6190 */ ((!!(_F6190)) << 15) | \
- /* available on F6192 */ ((!!(_F6192)) << 16) | \
- /* available on F6281 */ ((!!(_F6281)) << 17) | \
- /* available on F6282 */ ((!!(_F6282)) << 18))
-
- /* num sel i o 6180 6190 6192 6281 6282 */
-
-#define MPP_F6180_MASK MPP( 0, 0x0, 0, 0, 1, 0, 0, 0, 0 )
-#define MPP_F6190_MASK MPP( 0, 0x0, 0, 0, 0, 1, 0, 0, 0 )
-#define MPP_F6192_MASK MPP( 0, 0x0, 0, 0, 0, 0, 1, 0, 0 )
-#define MPP_F6281_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 1, 0 )
-#define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 )
-
-#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 )
-
-#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 )
-
-#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 )
-#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-
-#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 )
-#define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 )
-#define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 )
-
-#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 )
-#define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 )
-#define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 )
-#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 )
-#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-
-#define MPP_MAX 49
-
-void kirkwood_mpp_conf(unsigned int *mpp_list);
-
-#endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
deleted file mode 100644
index 913d032..0000000
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ /dev/null
@@ -1,422 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/netxbig_v2-setup.c
- *
- * LaCie 2Big and 5Big Network v2 board setup
- *
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/leds-kirkwood-netxbig.h>
-#include "common.h"
-#include "mpp.h"
-#include "lacie_v2-common.h"
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data netxbig_v2_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data netxbig_v2_sata_data = {
- .n_ports = 2,
-};
-
-/*****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define NETXBIG_V2_GPIO_SWITCH_POWER_ON 13
-#define NETXBIG_V2_GPIO_SWITCH_POWER_OFF 15
-#define NETXBIG_V2_GPIO_FUNC_BUTTON 34
-
-#define NETXBIG_V2_SWITCH_POWER_ON 0x1
-#define NETXBIG_V2_SWITCH_POWER_OFF 0x2
-
-static struct gpio_keys_button netxbig_v2_buttons[] = {
- [0] = {
- .type = EV_SW,
- .code = NETXBIG_V2_SWITCH_POWER_ON,
- .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_ON,
- .desc = "Back power switch (on|auto)",
- .active_low = 1,
- },
- [1] = {
- .type = EV_SW,
- .code = NETXBIG_V2_SWITCH_POWER_OFF,
- .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_OFF,
- .desc = "Back power switch (auto|off)",
- .active_low = 1,
- },
- [2] = {
- .code = KEY_OPTION,
- .gpio = NETXBIG_V2_GPIO_FUNC_BUTTON,
- .desc = "Function button",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data netxbig_v2_button_data = {
- .buttons = netxbig_v2_buttons,
- .nbuttons = ARRAY_SIZE(netxbig_v2_buttons),
-};
-
-static struct platform_device netxbig_v2_gpio_buttons = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &netxbig_v2_button_data,
- },
-};
-
-/*****************************************************************************
- * GPIO extension LEDs
- ****************************************************************************/
-
-/*
- * The LEDs are controlled by a CPLD and can be configured through a GPIO
- * extension bus:
- *
- * - address register : bit [0-2] -> GPIO [47-49]
- * - data register : bit [0-2] -> GPIO [44-46]
- * - enable register : GPIO 29
- */
-
-static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
-static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
-
-static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
- .addr = netxbig_v2_gpio_ext_addr,
- .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
- .data = netxbig_v2_gpio_ext_data,
- .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data),
- .enable = 29,
-};
-
-/*
- * Address register selection:
- *
- * addr | register
- * ----------------------------
- * 0 | front LED
- * 1 | front LED brightness
- * 2 | SATA LED brightness
- * 3 | SATA0 LED
- * 4 | SATA1 LED
- * 5 | SATA2 LED
- * 6 | SATA3 LED
- * 7 | SATA4 LED
- *
- * Data register configuration:
- *
- * data | LED brightness
- * -------------------------------------------------
- * 0 | min (off)
- * - | -
- * 7 | max
- *
- * data | front LED mode
- * -------------------------------------------------
- * 0 | fix off
- * 1 | fix blue on
- * 2 | fix red on
- * 3 | blink blue on=1 sec and blue off=1 sec
- * 4 | blink red on=1 sec and red off=1 sec
- * 5 | blink blue on=2.5 sec and red on=0.5 sec
- * 6 | blink blue on=1 sec and red on=1 sec
- * 7 | blink blue on=0.5 sec and blue off=2.5 sec
- *
- * data | SATA LED mode
- * -------------------------------------------------
- * 0 | fix off
- * 1 | SATA activity blink
- * 2 | fix red on
- * 3 | blink blue on=1 sec and blue off=1 sec
- * 4 | blink red on=1 sec and red off=1 sec
- * 5 | blink blue on=2.5 sec and red on=0.5 sec
- * 6 | blink blue on=1 sec and red on=1 sec
- * 7 | fix blue on
- */
-
-static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 2,
- [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
- [NETXBIG_LED_TIMER1] = 4,
- [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
-};
-
-static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 1,
- [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
- [NETXBIG_LED_TIMER1] = 3,
- [NETXBIG_LED_TIMER2] = 7,
-};
-
-static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 7,
- [NETXBIG_LED_SATA] = 1,
- [NETXBIG_LED_TIMER1] = 3,
- [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
-};
-
-static struct netxbig_led_timer netxbig_v2_led_timer[] = {
- [0] = {
- .delay_on = 500,
- .delay_off = 500,
- .mode = NETXBIG_LED_TIMER1,
- },
- [1] = {
- .delay_on = 500,
- .delay_off = 1000,
- .mode = NETXBIG_LED_TIMER2,
- },
-};
-
-#define NETXBIG_LED(_name, maddr, mval, baddr) \
- { .name = _name, \
- .mode_addr = maddr, \
- .mode_val = mval, \
- .bright_addr = baddr }
-
-static struct netxbig_led net2big_v2_leds_ctrl[] = {
- NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
- NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1),
- NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
-};
-
-static struct netxbig_led_platform_data net2big_v2_leds_data = {
- .gpio_ext = &netxbig_v2_gpio_ext,
- .timer = netxbig_v2_led_timer,
- .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
- .leds = net2big_v2_leds_ctrl,
- .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl),
-};
-
-static struct netxbig_led net5big_v2_leds_ctrl[] = {
- NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
- NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1),
- NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata5", 7, netxbig_v2_red_mled, 2),
-};
-
-static struct netxbig_led_platform_data net5big_v2_leds_data = {
- .gpio_ext = &netxbig_v2_gpio_ext,
- .timer = netxbig_v2_led_timer,
- .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
- .leds = net5big_v2_leds_ctrl,
- .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl),
-};
-
-static struct platform_device netxbig_v2_leds = {
- .name = "leds-netxbig",
- .id = -1,
- .dev = {
- .platform_data = &net2big_v2_leds_data,
- },
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int net2big_v2_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP6_SYSRST_OUTn,
- MPP7_GPO, /* Request power-off */
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP13_GPIO, /* Rear power switch (on|auto) */
- MPP14_GPIO, /* USB fuse alarm */
- MPP15_GPIO, /* Rear power switch (auto|off) */
- MPP16_GPIO, /* SATA HDD1 power */
- MPP17_GPIO, /* SATA HDD2 power */
- MPP20_SATA1_ACTn,
- MPP21_SATA0_ACTn,
- MPP24_GPIO, /* USB mode select */
- MPP26_GPIO, /* USB device vbus */
- MPP28_GPIO, /* USB enable host vbus */
- MPP29_GPIO, /* GPIO extension ALE */
- MPP34_GPIO, /* Rear Push button */
- MPP35_GPIO, /* Inhibit switch power-off */
- MPP36_GPIO, /* SATA HDD1 presence */
- MPP37_GPIO, /* SATA HDD2 presence */
- MPP40_GPIO, /* eSATA presence */
- MPP44_GPIO, /* GPIO extension (data 0) */
- MPP45_GPIO, /* GPIO extension (data 1) */
- MPP46_GPIO, /* GPIO extension (data 2) */
- MPP47_GPIO, /* GPIO extension (addr 0) */
- MPP48_GPIO, /* GPIO extension (addr 1) */
- MPP49_GPIO, /* GPIO extension (addr 2) */
- 0
-};
-
-static unsigned int net5big_v2_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP6_SYSRST_OUTn,
- MPP7_GPO, /* Request power-off */
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP13_GPIO, /* Rear power switch (on|auto) */
- MPP14_GPIO, /* USB fuse alarm */
- MPP15_GPIO, /* Rear power switch (auto|off) */
- MPP16_GPIO, /* SATA HDD1 power */
- MPP17_GPIO, /* SATA HDD2 power */
- MPP20_GE1_TXD0,
- MPP21_GE1_TXD1,
- MPP22_GE1_TXD2,
- MPP23_GE1_TXD3,
- MPP24_GE1_RXD0,
- MPP25_GE1_RXD1,
- MPP26_GE1_RXD2,
- MPP27_GE1_RXD3,
- MPP28_GPIO, /* USB enable host vbus */
- MPP29_GPIO, /* GPIO extension ALE */
- MPP30_GE1_RXCTL,
- MPP31_GE1_RXCLK,
- MPP32_GE1_TCLKOUT,
- MPP33_GE1_TXCTL,
- MPP34_GPIO, /* Rear Push button */
- MPP35_GPIO, /* Inhibit switch power-off */
- MPP36_GPIO, /* SATA HDD1 presence */
- MPP37_GPIO, /* SATA HDD2 presence */
- MPP38_GPIO, /* SATA HDD3 presence */
- MPP39_GPIO, /* SATA HDD4 presence */
- MPP40_GPIO, /* SATA HDD5 presence */
- MPP41_GPIO, /* SATA HDD3 power */
- MPP42_GPIO, /* SATA HDD4 power */
- MPP43_GPIO, /* SATA HDD5 power */
- MPP44_GPIO, /* GPIO extension (data 0) */
- MPP45_GPIO, /* GPIO extension (data 1) */
- MPP46_GPIO, /* GPIO extension (data 2) */
- MPP47_GPIO, /* GPIO extension (addr 0) */
- MPP48_GPIO, /* GPIO extension (addr 1) */
- MPP49_GPIO, /* GPIO extension (addr 2) */
- 0
-};
-
-#define NETXBIG_V2_GPIO_POWER_OFF 7
-
-static void netxbig_v2_power_off(void)
-{
- gpio_set_value(NETXBIG_V2_GPIO_POWER_OFF, 1);
-}
-
-static void __init netxbig_v2_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- if (machine_is_net2big_v2())
- kirkwood_mpp_conf(net2big_v2_mpp_config);
- else
- kirkwood_mpp_conf(net5big_v2_mpp_config);
-
- if (machine_is_net2big_v2())
- lacie_v2_hdd_power_init(2);
- else
- lacie_v2_hdd_power_init(5);
-
- kirkwood_ehci_init();
- kirkwood_ge00_init(&netxbig_v2_ge00_data);
- if (machine_is_net5big_v2())
- kirkwood_ge01_init(&netxbig_v2_ge01_data);
- kirkwood_sata_init(&netxbig_v2_sata_data);
- kirkwood_uart0_init();
- lacie_v2_register_flash();
- lacie_v2_register_i2c_devices();
-
- if (machine_is_net5big_v2())
- netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
- platform_device_register(&netxbig_v2_leds);
- platform_device_register(&netxbig_v2_gpio_buttons);
-
- if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 &&
- gpio_direction_output(NETXBIG_V2_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = netxbig_v2_power_off;
- else
- pr_err("netxbig_v2: failed to configure power-off GPIO\n");
-}
-
-#ifdef CONFIG_MACH_NET2BIG_V2
-MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
- .atag_offset = 0x100,
- .init_machine = netxbig_v2_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_NET5BIG_V2
-MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
- .atag_offset = 0x100,
- .init_machine = netxbig_v2_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
deleted file mode 100644
index e5cf841..0000000
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/openrd-setup.c
- *
- * Marvell OpenRD (Base|Client|Ultimate) Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition openrd_nand_parts[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_1M,
- .mask_flags = MTD_WRITEABLE
- }, {
- .name = "uImage",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_4M
- }, {
- .name = "root",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- },
-};
-
-static struct mv643xx_eth_platform_data openrd_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data openrd_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(24),
-};
-
-static struct mv_sata_platform_data openrd_sata_data = {
- .n_ports = 2,
-};
-
-static struct mvsdio_platform_data openrd_mvsdio_data = {
- .gpio_card_detect = 29, /* MPP29 used as SD card detect */
- .gpio_write_protect = -1,
-};
-
-static unsigned int openrd_mpp_config[] __initdata = {
- MPP12_SD_CLK,
- MPP13_SD_CMD,
- MPP14_SD_D0,
- MPP15_SD_D1,
- MPP16_SD_D2,
- MPP17_SD_D3,
- MPP28_GPIO,
- MPP29_GPIO,
- MPP34_GPIO,
- 0
-};
-
-/* Configure MPP for UART1 */
-static unsigned int openrd_uart1_mpp_config[] __initdata = {
- MPP13_UART1_TXD,
- MPP14_UART1_RXD,
- 0
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("cs42l51", 0x4a),
- },
-};
-
-static struct platform_device openrd_client_audio_device = {
- .name = "openrd-client-audio",
- .id = -1,
-};
-
-static int __initdata uart1;
-
-static int __init sd_uart_selection(char *str)
-{
- uart1 = -EINVAL;
-
- /* Default is SD. Change if required, for UART */
- if (!str)
- return 0;
-
- if (!strncmp(str, "232", 3)) {
- uart1 = 232;
- } else if (!strncmp(str, "485", 3)) {
- /* OpenRD-Base doesn't have RS485. Treat is as an
- * unknown argument & just have default setting -
- * which is SD */
- if (machine_is_openrd_base()) {
- uart1 = -ENODEV;
- return 1;
- }
-
- uart1 = 485;
- }
- return 1;
-}
-/* Parse boot_command_line string kw_openrd_init_uart1=232/485 */
-__setup("kw_openrd_init_uart1=", sd_uart_selection);
-
-static int __init uart1_mpp_config(void)
-{
- kirkwood_mpp_conf(openrd_uart1_mpp_config);
-
- if (gpio_request(34, "SD_UART1_SEL")) {
- pr_err("GPIO request 34 failed for SD/UART1 selection\n");
- return -EIO;
- }
-
- if (gpio_request(28, "RS232_RS485_SEL")) {
- pr_err("GPIO request 28 failed for RS232/RS485 selection\n");
- gpio_free(34);
- return -EIO;
- }
-
- /* Select UART1
- * Pin # 34: 0 => UART1, 1 => SD */
- gpio_direction_output(34, 0);
-
- /* Select RS232 OR RS485
- * Pin # 28: 0 => RS232, 1 => RS485 */
- if (uart1 == 232)
- gpio_direction_output(28, 0);
- else
- gpio_direction_output(28, 1);
-
- gpio_free(34);
- gpio_free(28);
-
- return 0;
-}
-
-static void __init openrd_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(openrd_mpp_config);
-
- kirkwood_uart0_init();
- kirkwood_nand_init(openrd_nand_parts, ARRAY_SIZE(openrd_nand_parts),
- 25);
-
- kirkwood_ehci_init();
-
- if (machine_is_openrd_ultimate()) {
- openrd_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
- openrd_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
- }
-
- kirkwood_ge00_init(&openrd_ge00_data);
- if (!machine_is_openrd_base())
- kirkwood_ge01_init(&openrd_ge01_data);
-
- kirkwood_sata_init(&openrd_sata_data);
-
- kirkwood_i2c_init();
-
- if (machine_is_openrd_client() || machine_is_openrd_ultimate()) {
- platform_device_register(&openrd_client_audio_device);
- i2c_register_board_info(0, i2c_board_info,
- ARRAY_SIZE(i2c_board_info));
- kirkwood_audio_init();
- }
-
- if (uart1 <= 0) {
- if (uart1 < 0)
- pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n",
- uart1);
-
- /* Select SD
- * Pin # 34: 0 => UART1, 1 => SD */
- if (gpio_request(34, "SD_UART1_SEL")) {
- pr_err("GPIO request 34 failed for SD/UART1 selection\n");
- } else {
-
- gpio_direction_output(34, 1);
- gpio_free(34);
- kirkwood_sdio_init(&openrd_mvsdio_data);
- }
- } else {
- if (!uart1_mpp_config())
- kirkwood_uart1_init();
- }
-}
-
-static int __init openrd_pci_init(void)
-{
- if (machine_is_openrd_base() ||
- machine_is_openrd_client() ||
- machine_is_openrd_ultimate())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(openrd_pci_init);
-
-#ifdef CONFIG_MACH_OPENRD_BASE
-MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
- /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .atag_offset = 0x100,
- .init_machine = openrd_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_OPENRD_CLIENT
-MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
- /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .atag_offset = 0x100,
- .init_machine = openrd_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_OPENRD_ULTIMATE
-MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
- /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .atag_offset = 0x100,
- .init_machine = openrd_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
deleted file mode 100644
index 12d86f3..0000000
--- a/arch/arm/mach-kirkwood/pcie.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/pcie.c
- *
- * PCIe functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/mbus.h>
-#include <video/vga.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <plat/pcie.h>
-#include <mach/bridge-regs.h>
-#include "common.h"
-
-/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
-#define KIRKWOOD_MBUS_PCIE0_MEM_TARGET 0x4
-#define KIRKWOOD_MBUS_PCIE0_MEM_ATTR 0xe8
-#define KIRKWOOD_MBUS_PCIE0_IO_TARGET 0x4
-#define KIRKWOOD_MBUS_PCIE0_IO_ATTR 0xe0
-#define KIRKWOOD_MBUS_PCIE1_MEM_TARGET 0x4
-#define KIRKWOOD_MBUS_PCIE1_MEM_ATTR 0xd8
-#define KIRKWOOD_MBUS_PCIE1_IO_TARGET 0x4
-#define KIRKWOOD_MBUS_PCIE1_IO_ATTR 0xd0
-
-static void kirkwood_enable_pcie_clk(const char *port)
-{
- struct clk *clk;
-
- clk = clk_get_sys("pcie", port);
- if (IS_ERR(clk)) {
- pr_err("PCIE clock %s missing\n", port);
- return;
- }
- clk_prepare_enable(clk);
- clk_put(clk);
-}
-
-/* This function is called very early in the boot when probing the
- hardware to determine what we actually are, and what rate tclk is
- ticking at. Hence calling kirkwood_enable_pcie_clk() is not
- possible since the clk tree has not been created yet. */
-void kirkwood_enable_pcie(void)
-{
- u32 curr = readl(CLOCK_GATING_CTRL);
- if (!(curr & CGC_PEX0))
- writel(curr | CGC_PEX0, CLOCK_GATING_CTRL);
-}
-
-void kirkwood_pcie_id(u32 *dev, u32 *rev)
-{
- kirkwood_enable_pcie();
- *dev = orion_pcie_dev_id(PCIE_VIRT_BASE);
- *rev = orion_pcie_rev(PCIE_VIRT_BASE);
-}
-
-struct pcie_port {
- u8 root_bus_nr;
- void __iomem *base;
- spinlock_t conf_lock;
- int irq;
- struct resource res;
-};
-
-static int pcie_port_map[2];
-static int num_pcie_ports;
-
-static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
-{
- /*
- * Don't go out when trying to access --
- * 1. nonexisting device on local bus
- * 2. where there's no device connected (no link)
- */
- if (bus == pp->root_bus_nr && dev == 0)
- return 1;
-
- if (!orion_pcie_link_up(pp->base))
- return 0;
-
- if (bus == pp->root_bus_nr && dev != 1)
- return 0;
-
- return 1;
-}
-
-
-/*
- * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
- * and then reading the PCIE_CONF_DATA register. Need to make sure these
- * transactions are atomic.
- */
-
-static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
- int size, u32 *val)
-{
- struct pci_sys_data *sys = bus->sysdata;
- struct pcie_port *pp = sys->private_data;
- unsigned long flags;
- int ret;
-
- if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
- *val = 0xffffffff;
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- spin_lock_irqsave(&pp->conf_lock, flags);
- ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
- spin_unlock_irqrestore(&pp->conf_lock, flags);
-
- return ret;
-}
-
-static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
- int where, int size, u32 val)
-{
- struct pci_sys_data *sys = bus->sysdata;
- struct pcie_port *pp = sys->private_data;
- unsigned long flags;
- int ret;
-
- if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- spin_lock_irqsave(&pp->conf_lock, flags);
- ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
- spin_unlock_irqrestore(&pp->conf_lock, flags);
-
- return ret;
-}
-
-static struct pci_ops pcie_ops = {
- .read = pcie_rd_conf,
- .write = pcie_wr_conf,
-};
-
-static void __init pcie0_ioresources_init(struct pcie_port *pp)
-{
- pp->base = PCIE_VIRT_BASE;
- pp->irq = IRQ_KIRKWOOD_PCIE;
-
- /*
- * IORESOURCE_MEM
- */
- pp->res.name = "PCIe 0 MEM";
- pp->res.start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
- pp->res.end = pp->res.start + KIRKWOOD_PCIE_MEM_SIZE - 1;
- pp->res.flags = IORESOURCE_MEM;
-}
-
-static void __init pcie1_ioresources_init(struct pcie_port *pp)
-{
- pp->base = PCIE1_VIRT_BASE;
- pp->irq = IRQ_KIRKWOOD_PCIE1;
-
- /*
- * IORESOURCE_MEM
- */
- pp->res.name = "PCIe 1 MEM";
- pp->res.start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
- pp->res.end = pp->res.start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
- pp->res.flags = IORESOURCE_MEM;
-}
-
-static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
-{
- struct pcie_port *pp;
- int index;
-
- if (nr >= num_pcie_ports)
- return 0;
-
- index = pcie_port_map[nr];
- pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
-
- pp = kzalloc(sizeof(*pp), GFP_KERNEL);
- if (!pp)
- panic("PCIe: failed to allocate pcie_port data");
- sys->private_data = pp;
- pp->root_bus_nr = sys->busnr;
- spin_lock_init(&pp->conf_lock);
-
- switch (index) {
- case 0:
- kirkwood_enable_pcie_clk("0");
- pcie0_ioresources_init(pp);
- pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE_IO_PHYS_BASE);
- break;
- case 1:
- kirkwood_enable_pcie_clk("1");
- pcie1_ioresources_init(pp);
- pci_ioremap_io(SZ_64K * sys->busnr,
- KIRKWOOD_PCIE1_IO_PHYS_BASE);
- break;
- default:
- panic("PCIe setup: invalid controller %d", index);
- }
-
- if (request_resource(&iomem_resource, &pp->res))
- panic("Request PCIe%d Memory resource failed\n", index);
-
- pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
-
- /*
- * Generic PCIe unit setup.
- */
- orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
-
- orion_pcie_setup(pp->base);
-
- return 1;
-}
-
-/*
- * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
- * is operating as a root complex this needs to be switched to
- * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
- * the device. Decoding setup is handled by the orion code.
- */
-static void rc_pci_fixup(struct pci_dev *dev)
-{
- if (dev->bus->parent == NULL && dev->devfn == 0) {
- int i;
-
- dev->class &= 0xff;
- dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
- for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
- dev->resource[i].start = 0;
- dev->resource[i].end = 0;
- dev->resource[i].flags = 0;
- }
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
-
-static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
- u8 pin)
-{
- struct pci_sys_data *sys = dev->sysdata;
- struct pcie_port *pp = sys->private_data;
-
- return pp->irq;
-}
-
-static struct hw_pci kirkwood_pci __initdata = {
- .setup = kirkwood_pcie_setup,
- .map_irq = kirkwood_pcie_map_irq,
- .ops = &pcie_ops,
-};
-
-static void __init add_pcie_port(int index, void __iomem *base)
-{
- pcie_port_map[num_pcie_ports++] = index;
- pr_info("Kirkwood PCIe port %d: link %s\n", index,
- orion_pcie_link_up(base) ? "up" : "down");
-}
-
-void __init kirkwood_pcie_init(unsigned int portmask)
-{
- mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE0_IO_TARGET,
- KIRKWOOD_MBUS_PCIE0_IO_ATTR,
- KIRKWOOD_PCIE_IO_PHYS_BASE,
- KIRKWOOD_PCIE_IO_SIZE,
- KIRKWOOD_PCIE_IO_BUS_BASE);
- mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE0_MEM_TARGET,
- KIRKWOOD_MBUS_PCIE0_MEM_ATTR,
- KIRKWOOD_PCIE_MEM_PHYS_BASE,
- KIRKWOOD_PCIE_MEM_SIZE);
- mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE1_IO_TARGET,
- KIRKWOOD_MBUS_PCIE1_IO_ATTR,
- KIRKWOOD_PCIE1_IO_PHYS_BASE,
- KIRKWOOD_PCIE1_IO_SIZE,
- KIRKWOOD_PCIE1_IO_BUS_BASE);
- mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE1_MEM_TARGET,
- KIRKWOOD_MBUS_PCIE1_MEM_ATTR,
- KIRKWOOD_PCIE1_MEM_PHYS_BASE,
- KIRKWOOD_PCIE1_MEM_SIZE);
-
- vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;
-
- if (portmask & KW_PCIE0)
- add_pcie_port(0, PCIE_VIRT_BASE);
-
- if (portmask & KW_PCIE1)
- add_pcie_port(1, PCIE1_VIRT_BASE);
-
- kirkwood_pci.nr_controllers = num_pcie_ports;
- pci_common_init(&kirkwood_pci);
-}
diff --git a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c
deleted file mode 100644
index 8e5e032..0000000
--- a/arch/arm/mach-kirkwood/pm.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Power Management driver for Marvell Kirkwood SoCs
- *
- * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License,
- * version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/suspend.h>
-#include <linux/io.h>
-#include <mach/bridge-regs.h>
-#include "common.h"
-
-static void __iomem *ddr_operation_base;
-static void __iomem *memory_pm_ctrl;
-
-static void kirkwood_low_power(void)
-{
- u32 mem_pm_ctrl;
-
- mem_pm_ctrl = readl(memory_pm_ctrl);
-
- /* Set peripherals to low-power mode */
- writel_relaxed(~0, memory_pm_ctrl);
-
- /* Set DDR in self-refresh */
- writel_relaxed(0x7, ddr_operation_base);
-
- /*
- * Set CPU in wait-for-interrupt state.
- * This disables the CPU core clocks,
- * the array clocks, and also the L2 controller.
- */
- cpu_do_idle();
-
- writel_relaxed(mem_pm_ctrl, memory_pm_ctrl);
-}
-
-static int kirkwood_suspend_enter(suspend_state_t state)
-{
- switch (state) {
- case PM_SUSPEND_STANDBY:
- kirkwood_low_power();
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static int kirkwood_pm_valid_standby(suspend_state_t state)
-{
- return state == PM_SUSPEND_STANDBY;
-}
-
-static const struct platform_suspend_ops kirkwood_suspend_ops = {
- .enter = kirkwood_suspend_enter,
- .valid = kirkwood_pm_valid_standby,
-};
-
-void __init kirkwood_pm_init(void)
-{
- ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
- memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4);
-
- suspend_set_ops(&kirkwood_suspend_ops);
-}
diff --git a/arch/arm/mach-kirkwood/pm.h b/arch/arm/mach-kirkwood/pm.h
deleted file mode 100644
index 21e7530..0000000
--- a/arch/arm/mach-kirkwood/pm.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Power Management driver for Marvell Kirkwood SoCs
- *
- * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License,
- * version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ARCH_KIRKWOOD_PM_H
-#define __ARCH_KIRKWOOD_PM_H
-
-#ifdef CONFIG_PM
-void kirkwood_pm_init(void);
-#else
-static inline void kirkwood_pm_init(void) {};
-#endif
-
-#endif
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
deleted file mode 100644
index e4fd312..0000000
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
- *
- * Marvell RD-88F6192-NAS Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/orion-gpio.h>
-#include "common.h"
-
-#define RD88F6192_GPIO_USB_VBUS 10
-
-static struct mv643xx_eth_platform_data rd88f6192_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data rd88f6192_sata_data = {
- .n_ports = 2,
-};
-
-static const struct flash_platform_data rd88F6192_spi_slave_data = {
- .type = "m25p128",
-};
-
-static struct spi_board_info __initdata rd88F6192_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &rd88F6192_spi_slave_data,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static void __init rd88f6192_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
-
- orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
- if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
- gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
- pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
-
- kirkwood_ehci_init();
- kirkwood_ge00_init(&rd88f6192_ge00_data);
- kirkwood_sata_init(&rd88f6192_sata_data);
- spi_register_board_info(rd88F6192_spi_slave_info,
- ARRAY_SIZE(rd88F6192_spi_slave_info));
- kirkwood_spi_init();
- kirkwood_uart0_init();
-}
-
-static int __init rd88f6192_pci_init(void)
-{
- if (machine_is_rd88f6192_nas())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(rd88f6192_pci_init);
-
-MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
- /* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .atag_offset = 0x100,
- .init_machine = rd88f6192_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
deleted file mode 100644
index 5154bd2..0000000
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/rd88f6281-setup.c
- *
- * Marvell RD-88F6281 Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition rd88f6281_nand_parts[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_1M
- }, {
- .name = "uImage",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_2M
- }, {
- .name = "root",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- },
-};
-
-static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_NONE,
- .speed = SPEED_1000,
- .duplex = DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f6281_switch_chip_data = {
- .port_names[0] = "lan1",
- .port_names[1] = "lan2",
- .port_names[2] = "lan3",
- .port_names[3] = "lan4",
- .port_names[5] = "cpu",
-};
-
-static struct dsa_platform_data rd88f6281_switch_plat_data = {
- .nr_chips = 1,
- .chip = &rd88f6281_switch_chip_data,
-};
-
-static struct mv643xx_eth_platform_data rd88f6281_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(11),
-};
-
-static struct mv_sata_platform_data rd88f6281_sata_data = {
- .n_ports = 2,
-};
-
-static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
- .gpio_card_detect = 28,
- .gpio_write_protect = -1,
-};
-
-static unsigned int rd88f6281_mpp_config[] __initdata = {
- MPP28_GPIO,
- 0
-};
-
-static void __init rd88f6281_init(void)
-{
- u32 dev, rev;
-
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(rd88f6281_mpp_config);
-
- kirkwood_nand_init(rd88f6281_nand_parts,
- ARRAY_SIZE(rd88f6281_nand_parts),
- 25);
- kirkwood_ehci_init();
-
- kirkwood_ge00_init(&rd88f6281_ge00_data);
- kirkwood_pcie_id(&dev, &rev);
- if (rev == MV88F6281_REV_A0) {
- rd88f6281_switch_chip_data.sw_addr = 10;
- kirkwood_ge01_init(&rd88f6281_ge01_data);
- } else {
- rd88f6281_switch_chip_data.port_names[4] = "wan";
- }
- kirkwood_ge00_switch_init(&rd88f6281_switch_plat_data, NO_IRQ);
-
- kirkwood_sata_init(&rd88f6281_sata_data);
- kirkwood_sdio_init(&rd88f6281_mvsdio_data);
- kirkwood_uart0_init();
-}
-
-static int __init rd88f6281_pci_init(void)
-{
- if (machine_is_rd88f6281())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(rd88f6281_pci_init);
-
-MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
- /* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .atag_offset = 0x100,
- .init_machine = rd88f6281_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
deleted file mode 100644
index 8736f8c..0000000
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- *
- * HP t5325 Thin Client setup
- *
- * Copyright (C) 2010 Martin Michlmayr <tbm@cyrius.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <sound/alc5623.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition hp_t5325_partitions[] = {
- {
- .name = "u-boot env",
- .size = SZ_64K,
- .offset = SZ_512K + SZ_256K,
- },
- {
- .name = "permanent u-boot env",
- .size = SZ_64K,
- .offset = MTDPART_OFS_APPEND,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "HP env",
- .size = SZ_64K,
- .offset = MTDPART_OFS_APPEND,
- },
- {
- .name = "u-boot",
- .size = SZ_512K,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "SSD firmware",
- .size = SZ_256K,
- .offset = SZ_512K,
- },
-};
-
-static const struct flash_platform_data hp_t5325_flash = {
- .type = "mx25l8005",
- .name = "spi_flash",
- .parts = hp_t5325_partitions,
- .nr_parts = ARRAY_SIZE(hp_t5325_partitions),
-};
-
-static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &hp_t5325_flash,
- .irq = -1,
- },
-};
-
-static struct mv643xx_eth_platform_data hp_t5325_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data hp_t5325_sata_data = {
- .n_ports = 2,
-};
-
-static struct gpio_keys_button hp_t5325_buttons[] = {
- {
- .code = KEY_POWER,
- .gpio = 45,
- .desc = "Power",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data hp_t5325_button_data = {
- .buttons = hp_t5325_buttons,
- .nbuttons = ARRAY_SIZE(hp_t5325_buttons),
-};
-
-static struct platform_device hp_t5325_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &hp_t5325_button_data,
- }
-};
-
-static struct platform_device hp_t5325_audio_device = {
- .name = "t5325-audio",
- .id = -1,
-};
-
-static unsigned int hp_t5325_mpp_config[] __initdata = {
- MPP0_NF_IO2,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP4_NF_IO6,
- MPP5_NF_IO7,
- MPP6_SYSRST_OUTn,
- MPP7_SPI_SCn,
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP12_SD_CLK,
- MPP13_GPIO,
- MPP14_GPIO,
- MPP15_GPIO,
- MPP16_GPIO,
- MPP17_GPIO,
- MPP18_NF_IO0,
- MPP19_NF_IO1,
- MPP20_GPIO,
- MPP21_GPIO,
- MPP22_GPIO,
- MPP23_GPIO,
- MPP32_GPIO,
- MPP33_GE1_TXCTL,
- MPP39_AU_I2SBCLK,
- MPP40_AU_I2SDO,
- MPP43_AU_I2SDI,
- MPP41_AU_I2SLRCLK,
- MPP42_AU_I2SMCLK,
- MPP45_GPIO, /* Power button */
- MPP48_GPIO, /* Board power off */
- 0
-};
-
-static struct alc5623_platform_data alc5621_data = {
- .add_ctrl = 0x3700,
- .jack_det_ctrl = 0x4810,
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("alc5621", 0x1a),
- .platform_data = &alc5621_data,
- },
-};
-
-#define HP_T5325_GPIO_POWER_OFF 48
-
-static void hp_t5325_power_off(void)
-{
- gpio_set_value(HP_T5325_GPIO_POWER_OFF, 1);
-}
-
-static void __init hp_t5325_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(hp_t5325_mpp_config);
-
- kirkwood_uart0_init();
- spi_register_board_info(hp_t5325_spi_slave_info,
- ARRAY_SIZE(hp_t5325_spi_slave_info));
- kirkwood_spi_init();
- kirkwood_i2c_init();
- kirkwood_ge00_init(&hp_t5325_ge00_data);
- kirkwood_sata_init(&hp_t5325_sata_data);
- kirkwood_ehci_init();
- platform_device_register(&hp_t5325_button_device);
- platform_device_register(&hp_t5325_audio_device);
-
- i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info));
- kirkwood_audio_init();
-
- if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 &&
- gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = hp_t5325_power_off;
- else
- pr_err("t5325: failed to configure power-off GPIO\n");
-}
-
-static int __init hp_t5325_pci_init(void)
-{
- if (machine_is_t5325())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(hp_t5325_pci_init);
-
-MACHINE_START(T5325, "HP t5325 Thin Client")
- /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .atag_offset = 0x100,
- .init_machine = hp_t5325_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
deleted file mode 100644
index e1267d6..0000000
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- *
- * QNAP TS-11x/TS-21x Turbo NAS Board Setup
- *
- * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-#include "tsx1x-common.h"
-
-static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
- I2C_BOARD_INFO("s35390a", 0x30),
-};
-
-static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data qnap_ts219_sata_data = {
- .n_ports = 2,
-};
-
-static struct gpio_keys_button qnap_ts219_buttons[] = {
- {
- .code = KEY_COPY,
- .gpio = 15,
- .desc = "USB Copy",
- .active_low = 1,
- },
- {
- .code = KEY_RESTART,
- .gpio = 16,
- .desc = "Reset",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data qnap_ts219_button_data = {
- .buttons = qnap_ts219_buttons,
- .nbuttons = ARRAY_SIZE(qnap_ts219_buttons),
-};
-
-static struct platform_device qnap_ts219_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &qnap_ts219_button_data,
- }
-};
-
-static unsigned int qnap_ts219_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP4_SATA1_ACTn,
- MPP5_SATA0_ACTn,
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP13_UART1_TXD, /* PIC controller */
- MPP14_UART1_RXD, /* PIC controller */
- MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */
- MPP16_GPIO, /* Reset button (on devices with 88F6281) */
- MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
- MPP37_GPIO, /* Reset button (on devices with 88F6282) */
- MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */
- MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */
- 0
-};
-
-static void __init qnap_ts219_init(void)
-{
- u32 dev, rev;
-
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(qnap_ts219_mpp_config);
-
- kirkwood_uart0_init();
- kirkwood_uart1_init(); /* A PIC controller is connected here. */
- qnap_tsx1x_register_flash();
- kirkwood_i2c_init();
- i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
-
- kirkwood_pcie_id(&dev, &rev);
- if (dev == MV88F6282_DEV_ID) {
- qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */
- qnap_ts219_buttons[1].gpio = 37; /* Reset button */
- qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
- }
-
- kirkwood_ge00_init(&qnap_ts219_ge00_data);
- kirkwood_sata_init(&qnap_ts219_sata_data);
- kirkwood_ehci_init();
- platform_device_register(&qnap_ts219_button_device);
-
- pm_power_off = qnap_tsx1x_power_off;
-
-}
-
-static int __init ts219_pci_init(void)
-{
- if (machine_is_ts219())
- kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(ts219_pci_init);
-
-MACHINE_START(TS219, "QNAP TS-119/TS-219")
- /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .atag_offset = 0x100,
- .init_machine = qnap_ts219_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
deleted file mode 100644
index 81d5858..0000000
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *
- * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
- *
- * Copyright (C) 2009-2010 Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-#include "tsx1x-common.h"
-
-/* for the PCIe reset workaround */
-#include <plat/pcie.h>
-
-
-#define QNAP_TS41X_JUMPER_JP1 45
-
-static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
- I2C_BOARD_INFO("s35390a", 0x30),
-};
-
-static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv_sata_platform_data qnap_ts41x_sata_data = {
- .n_ports = 2,
-};
-
-static struct gpio_keys_button qnap_ts41x_buttons[] = {
- {
- .code = KEY_COPY,
- .gpio = 43,
- .desc = "USB Copy",
- .active_low = 1,
- },
- {
- .code = KEY_RESTART,
- .gpio = 37,
- .desc = "Reset",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data qnap_ts41x_button_data = {
- .buttons = qnap_ts41x_buttons,
- .nbuttons = ARRAY_SIZE(qnap_ts41x_buttons),
-};
-
-static struct platform_device qnap_ts41x_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &qnap_ts41x_button_data,
- }
-};
-
-static unsigned int qnap_ts41x_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP6_SYSRST_OUTn,
- MPP7_PEX_RST_OUTn,
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP13_UART1_TXD, /* PIC controller */
- MPP14_UART1_RXD, /* PIC controller */
- MPP15_SATA0_ACTn,
- MPP16_SATA1_ACTn,
- MPP20_GE1_TXD0,
- MPP21_GE1_TXD1,
- MPP22_GE1_TXD2,
- MPP23_GE1_TXD3,
- MPP24_GE1_RXD0,
- MPP25_GE1_RXD1,
- MPP26_GE1_RXD2,
- MPP27_GE1_RXD3,
- MPP30_GE1_RXCTL,
- MPP31_GE1_RXCLK,
- MPP32_GE1_TCLKOUT,
- MPP33_GE1_TXCTL,
- MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
- MPP37_GPIO, /* Reset button */
- MPP43_GPIO, /* USB Copy button */
- MPP44_GPIO, /* Board ID: 0: TS-419U, 1: TS-419 */
- MPP45_GPIO, /* JP1: 0: LCD, 1: serial console */
- MPP46_GPIO, /* External SATA HDD1 error indicator */
- MPP47_GPIO, /* External SATA HDD2 error indicator */
- MPP48_GPIO, /* External SATA HDD3 error indicator */
- MPP49_GPIO, /* External SATA HDD4 error indicator */
- 0
-};
-
-static void __init qnap_ts41x_init(void)
-{
- u32 dev, rev;
-
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(qnap_ts41x_mpp_config);
-
- kirkwood_uart0_init();
- kirkwood_uart1_init(); /* A PIC controller is connected here. */
- qnap_tsx1x_register_flash();
- kirkwood_i2c_init();
- i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
-
- kirkwood_pcie_id(&dev, &rev);
- if (dev == MV88F6282_DEV_ID) {
- qnap_ts41x_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
- qnap_ts41x_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
- }
- kirkwood_ge00_init(&qnap_ts41x_ge00_data);
- kirkwood_ge01_init(&qnap_ts41x_ge01_data);
-
- kirkwood_sata_init(&qnap_ts41x_sata_data);
- kirkwood_ehci_init();
- platform_device_register(&qnap_ts41x_button_device);
-
- pm_power_off = qnap_tsx1x_power_off;
-
- if (gpio_request(QNAP_TS41X_JUMPER_JP1, "JP1") == 0)
- gpio_export(QNAP_TS41X_JUMPER_JP1, 0);
-}
-
-static int __init ts41x_pci_init(void)
-{
- if (machine_is_ts41x()) {
- u32 dev, rev;
-
- /*
- * Without this explicit reset, the PCIe SATA controller
- * (Marvell 88sx7042/sata_mv) is known to stop working
- * after a few minutes.
- */
- orion_pcie_reset(PCIE_VIRT_BASE);
-
- kirkwood_pcie_id(&dev, &rev);
- if (dev == MV88F6282_DEV_ID)
- kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
- else
- kirkwood_pcie_init(KW_PCIE0);
- }
- return 0;
-}
-subsys_initcall(ts41x_pci_init);
-
-MACHINE_START(TS41X, "QNAP TS-41x")
- /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .atag_offset = 0x100,
- .init_machine = qnap_ts41x_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
deleted file mode 100644
index cec87ce..0000000
--- a/arch/arm/mach-kirkwood/tsx1x-common.c
+++ /dev/null
@@ -1,113 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/serial_reg.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "tsx1x-common.h"
-
-/*
- * QNAP TS-x1x Boards flash
- */
-
-/****************************************************************************
- * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
- * partitions on the device because we want to keep compatibility with
- * the QNAP firmware.
- * Layout as used by QNAP:
- * 0x00000000-0x00080000 : "U-Boot"
- * 0x00200000-0x00400000 : "Kernel"
- * 0x00400000-0x00d00000 : "RootFS"
- * 0x00d00000-0x01000000 : "RootFS2"
- * 0x00080000-0x000c0000 : "U-Boot Config"
- * 0x000c0000-0x00200000 : "NAS Config"
- *
- * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
- * used by the QNAP TS-109/TS-209.
- *
- ***************************************************************************/
-
-static struct mtd_partition qnap_tsx1x_partitions[] = {
- {
- .name = "U-Boot",
- .size = 0x00080000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Kernel",
- .size = 0x00200000,
- .offset = 0x00200000,
- }, {
- .name = "RootFS1",
- .size = 0x00900000,
- .offset = 0x00400000,
- }, {
- .name = "RootFS2",
- .size = 0x00300000,
- .offset = 0x00d00000,
- }, {
- .name = "U-Boot Config",
- .size = 0x00040000,
- .offset = 0x00080000,
- }, {
- .name = "NAS Config",
- .size = 0x00140000,
- .offset = 0x000c0000,
- },
-};
-
-static const struct flash_platform_data qnap_tsx1x_flash = {
- .type = "m25p128",
- .name = "spi_flash",
- .parts = qnap_tsx1x_partitions,
- .nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions),
-};
-
-static struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &qnap_tsx1x_flash,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-void __init qnap_tsx1x_register_flash(void)
-{
- spi_register_board_info(qnap_tsx1x_spi_slave_info,
- ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
- kirkwood_spi_init();
-}
-
-
-/*****************************************************************************
- * QNAP TS-x1x specific power off method via UART1-attached PIC
- ****************************************************************************/
-
-#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
-
-void qnap_tsx1x_power_off(void)
-{
- /* 19200 baud divisor */
- const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
-
- pr_info("%s: triggering power-off...\n", __func__);
-
- /* hijack UART1 and reset into sane state (19200,8n1) */
- writel(0x83, UART1_REG(LCR));
- writel(divisor & 0xff, UART1_REG(DLL));
- writel((divisor >> 8) & 0xff, UART1_REG(DLM));
- writel(0x03, UART1_REG(LCR));
- writel(0x00, UART1_REG(IER));
- writel(0x00, UART1_REG(FCR));
- writel(0x00, UART1_REG(MCR));
-
- /* send the power-off command 'A' to PIC */
- writel('A', UART1_REG(TX));
-}
-
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h
deleted file mode 100644
index 7fa0373..0000000
--- a/arch/arm/mach-kirkwood/tsx1x-common.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
-#define __ARCH_KIRKWOOD_TSX1X_COMMON_H
-
-extern void __init qnap_tsx1x_register_flash(void);
-extern void qnap_tsx1x_power_off(void);
-
-#endif
diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
new file mode 100644
index 0000000..2c043a2
--- /dev/null
+++ b/arch/arm/mach-mediatek/Kconfig
@@ -0,0 +1,6 @@
+config ARCH_MEDIATEK
+ bool "Mediatek MT6589 SoC" if ARCH_MULTI_V7
+ select ARM_GIC
+ select MTK_TIMER
+ help
+ Support for Mediatek Cortex-A7 Quad-Core-SoC MT6589.
diff --git a/arch/arm/mach-mediatek/Makefile b/arch/arm/mach-mediatek/Makefile
new file mode 100644
index 0000000..43e619f
--- /dev/null
+++ b/arch/arm/mach-mediatek/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ARCH_MEDIATEK) += mediatek.o
diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
new file mode 100644
index 0000000..f2acf07
--- /dev/null
+++ b/arch/arm/mach-mediatek/mediatek.c
@@ -0,0 +1,27 @@
+/*
+ * Device Tree support for Mediatek SoCs
+ *
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <asm/mach/arch.h>
+
+static const char * const mediatek_board_dt_compat[] = {
+ "mediatek,mt6589",
+ NULL,
+};
+
+DT_MACHINE_START(MEDIATEK_DT, "Mediatek Cortex-A7 (Device Tree)")
+ .dt_compat = mediatek_board_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index b9bc599..955d4a3 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -96,4 +96,11 @@
Say 'Y' here if you want your kernel to support boards based
on the Marvell Kirkwood device tree.
+config MACH_NETXBIG
+ bool "LaCie 2Big and 5Big Network v2"
+ depends on MACH_KIRKWOOD
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie 2Big and 5Big Network v2
+
endif
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 1636cdb..bc7689e 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -9,8 +9,8 @@
ifeq ($(CONFIG_MACH_MVEBU_V7),y)
obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
endif
obj-$(CONFIG_MACH_DOVE) += dove.o
obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o
+obj-$(CONFIG_MACH_NETXBIG) += netxbig.o
diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
index c3465f5..52c1603a 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.h
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
@@ -24,4 +24,7 @@
extern struct smp_operations armada_xp_smp_ops;
#endif
+int armada_370_xp_pmsu_idle_enter(unsigned long deepidle);
+void armada_370_xp_pmsu_idle_exit(void);
+
#endif /* __MACH_ARMADA_370_XP_H */
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index b2524d6..f244622 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -125,8 +125,16 @@
{
struct device_node *np;
u32 dev, rev;
+ int res;
- if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV)
+ /*
+ * The early SoC Z1 revision needs a quirk to be applied in order
+ * for the thermal controller to work properly. This quirk breaks
+ * the thermal support if applied on a SoC that doesn't need it,
+ * so we enforce the SoC revision to be known.
+ */
+ res = mvebu_get_soc_id(&dev, &rev);
+ if (res < 0 || (res == 0 && rev > ARMADA_375_Z1_REV))
return;
for_each_compatible_node(np, NULL, "marvell,armada375-thermal") {
@@ -160,7 +168,8 @@
/*
* The thermal controller needs some quirk too, so let's change
- * the compatible string to reflect this.
+ * the compatible string to reflect this and allow the driver
+ * the take the necessary action.
*/
prop = kzalloc(sizeof(*prop), GFP_KERNEL);
prop->name = kstrdup("compatible", GFP_KERNEL);
diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h
index 9c7bb43..98e32cc 100644
--- a/arch/arm/mach-mvebu/board.h
+++ b/arch/arm/mach-mvebu/board.h
@@ -13,4 +13,9 @@
#ifndef __ARCH_MVEBU_BOARD_H
#define __ARCH_MVEBU_BOARD_H
+#ifdef CONFIG_MACH_NETXBIG
+void netxbig_init(void);
+#else
+static inline void netxbig_init(void) {};
+#endif
#endif
diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c
index 477202f..2bdc323 100644
--- a/arch/arm/mach-mvebu/coherency.c
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -292,6 +292,10 @@
.notifier_call = mvebu_hwcc_notifier,
};
+static struct notifier_block mvebu_hwcc_pci_nb = {
+ .notifier_call = mvebu_hwcc_notifier,
+};
+
static void __init armada_370_coherency_init(struct device_node *np)
{
struct resource res;
@@ -427,7 +431,7 @@
{
if (coherency_available())
bus_register_notifier(&pci_bus_type,
- &mvebu_hwcc_nb);
+ &mvebu_hwcc_pci_nb);
return 0;
}
diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h
index b67fb7a..a97778e 100644
--- a/arch/arm/mach-mvebu/common.h
+++ b/arch/arm/mach-mvebu/common.h
@@ -21,7 +21,6 @@
int mvebu_cpu_reset_deassert(int cpu);
void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr);
void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr);
-
-void armada_xp_cpu_die(unsigned int cpu);
+int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev);
#endif
diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c
index 4a8f9ee..60fb537 100644
--- a/arch/arm/mach-mvebu/cpu-reset.c
+++ b/arch/arm/mach-mvebu/cpu-reset.c
@@ -67,7 +67,7 @@
return 0;
}
-int __init mvebu_cpu_reset_init(void)
+static int __init mvebu_cpu_reset_init(void)
{
struct device_node *np;
int res_idx;
diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S
index 5925366..da5bb29 100644
--- a/arch/arm/mach-mvebu/headsmp-a9.S
+++ b/arch/arm/mach-mvebu/headsmp-a9.S
@@ -15,6 +15,8 @@
#include <linux/linkage.h>
#include <linux/init.h>
+#include <asm/assembler.h>
+
__CPUINIT
#define CPU_RESUME_ADDR_REG 0xf10182d4
@@ -22,13 +24,18 @@
.global armada_375_smp_cpu1_enable_code_end
armada_375_smp_cpu1_enable_code_start:
- ldr r0, [pc, #4]
+ARM_BE8(setend be)
+ adr r0, 1f
+ ldr r0, [r0]
ldr r1, [r0]
+ARM_BE8(rev r1, r1)
mov pc, r1
+1:
.word CPU_RESUME_ADDR_REG
armada_375_smp_cpu1_enable_code_end:
ENTRY(mvebu_cortex_a9_secondary_startup)
+ARM_BE8(setend be)
bl v7_invalidate_l1
b secondary_startup
ENDPROC(mvebu_cortex_a9_secondary_startup)
diff --git a/arch/arm/mach-mvebu/hotplug.c b/arch/arm/mach-mvebu/hotplug.c
deleted file mode 100644
index d95e910..0000000
--- a/arch/arm/mach-mvebu/hotplug.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Symmetric Multi Processing (SMP) support for Armada XP
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <asm/proc-fns.h>
-#include "common.h"
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void __ref armada_xp_cpu_die(unsigned int cpu)
-{
- cpu_do_idle();
-
- /* We should never return from idle */
- panic("mvebu: cpu %d unexpectedly exit from shutdown\n", cpu);
-}
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index 46f1059..6b53108 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -180,6 +180,9 @@
kirkwood_pm_init();
kirkwood_dt_eth_fixup();
+ if (of_machine_is_compatible("lacie,netxbig"))
+ netxbig_init();
+
of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
}
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c
index d0f35b4..a99434b 100644
--- a/arch/arm/mach-mvebu/mvebu-soc-id.c
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.c
@@ -25,6 +25,7 @@
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/sys_soc.h>
+#include "common.h"
#include "mvebu-soc-id.h"
#define PCIE_DEV_ID_OFF 0x0
@@ -51,10 +52,10 @@
*rev = soc_rev;
return 0;
} else
- return -1;
+ return -ENODEV;
}
-static int __init mvebu_soc_id_init(void)
+static int __init get_soc_id_by_pci(void)
{
struct device_node *np;
int ret = 0;
@@ -129,6 +130,22 @@
return ret;
}
+
+static int __init mvebu_soc_id_init(void)
+{
+
+ /*
+ * First try to get the ID and the revision by the system
+ * register and use PCI registers only if it is not possible
+ */
+ if (!mvebu_system_controller_get_soc_id(&soc_dev_id, &soc_rev)) {
+ is_id_valid = true;
+ pr_info("MVEBU SoC ID=0x%X, Rev=0x%X\n", soc_dev_id, soc_rev);
+ return 0;
+ }
+
+ return get_soc_id_by_pci();
+}
early_initcall(mvebu_soc_id_init);
static int __init mvebu_soc_device(void)
diff --git a/arch/arm/mach-mvebu/netxbig.c b/arch/arm/mach-mvebu/netxbig.c
new file mode 100644
index 0000000..94b11b6
--- /dev/null
+++ b/arch/arm/mach-mvebu/netxbig.c
@@ -0,0 +1,191 @@
+/*
+ * arch/arm/mach-mvbu/board-netxbig.c
+ *
+ * LaCie 2Big and 5Big Network v2 board setup
+ *
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/leds-kirkwood-netxbig.h>
+#include "common.h"
+
+/*****************************************************************************
+ * GPIO extension LEDs
+ ****************************************************************************/
+
+/*
+ * The LEDs are controlled by a CPLD and can be configured through a GPIO
+ * extension bus:
+ *
+ * - address register : bit [0-2] -> GPIO [47-49]
+ * - data register : bit [0-2] -> GPIO [44-46]
+ * - enable register : GPIO 29
+ */
+
+static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
+static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
+
+static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
+ .addr = netxbig_v2_gpio_ext_addr,
+ .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
+ .data = netxbig_v2_gpio_ext_data,
+ .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data),
+ .enable = 29,
+};
+
+/*
+ * Address register selection:
+ *
+ * addr | register
+ * ----------------------------
+ * 0 | front LED
+ * 1 | front LED brightness
+ * 2 | SATA LED brightness
+ * 3 | SATA0 LED
+ * 4 | SATA1 LED
+ * 5 | SATA2 LED
+ * 6 | SATA3 LED
+ * 7 | SATA4 LED
+ *
+ * Data register configuration:
+ *
+ * data | LED brightness
+ * -------------------------------------------------
+ * 0 | min (off)
+ * - | -
+ * 7 | max
+ *
+ * data | front LED mode
+ * -------------------------------------------------
+ * 0 | fix off
+ * 1 | fix blue on
+ * 2 | fix red on
+ * 3 | blink blue on=1 sec and blue off=1 sec
+ * 4 | blink red on=1 sec and red off=1 sec
+ * 5 | blink blue on=2.5 sec and red on=0.5 sec
+ * 6 | blink blue on=1 sec and red on=1 sec
+ * 7 | blink blue on=0.5 sec and blue off=2.5 sec
+ *
+ * data | SATA LED mode
+ * -------------------------------------------------
+ * 0 | fix off
+ * 1 | SATA activity blink
+ * 2 | fix red on
+ * 3 | blink blue on=1 sec and blue off=1 sec
+ * 4 | blink red on=1 sec and red off=1 sec
+ * 5 | blink blue on=2.5 sec and red on=0.5 sec
+ * 6 | blink blue on=1 sec and red on=1 sec
+ * 7 | fix blue on
+ */
+
+static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
+ [NETXBIG_LED_OFF] = 0,
+ [NETXBIG_LED_ON] = 2,
+ [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
+ [NETXBIG_LED_TIMER1] = 4,
+ [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
+};
+
+static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
+ [NETXBIG_LED_OFF] = 0,
+ [NETXBIG_LED_ON] = 1,
+ [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
+ [NETXBIG_LED_TIMER1] = 3,
+ [NETXBIG_LED_TIMER2] = 7,
+};
+
+static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
+ [NETXBIG_LED_OFF] = 0,
+ [NETXBIG_LED_ON] = 7,
+ [NETXBIG_LED_SATA] = 1,
+ [NETXBIG_LED_TIMER1] = 3,
+ [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
+};
+
+static struct netxbig_led_timer netxbig_v2_led_timer[] = {
+ [0] = {
+ .delay_on = 500,
+ .delay_off = 500,
+ .mode = NETXBIG_LED_TIMER1,
+ },
+ [1] = {
+ .delay_on = 500,
+ .delay_off = 1000,
+ .mode = NETXBIG_LED_TIMER2,
+ },
+};
+
+#define NETXBIG_LED(_name, maddr, mval, baddr) \
+ { .name = _name, \
+ .mode_addr = maddr, \
+ .mode_val = mval, \
+ .bright_addr = baddr }
+
+static struct netxbig_led net2big_v2_leds_ctrl[] = {
+ NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
+ NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1),
+ NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
+};
+
+static struct netxbig_led_platform_data net2big_v2_leds_data = {
+ .gpio_ext = &netxbig_v2_gpio_ext,
+ .timer = netxbig_v2_led_timer,
+ .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
+ .leds = net2big_v2_leds_ctrl,
+ .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl),
+};
+
+static struct netxbig_led net5big_v2_leds_ctrl[] = {
+ NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
+ NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1),
+ NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2),
+ NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
+ NETXBIG_LED("net5big-v2:red:sata4", 7, netxbig_v2_red_mled, 2),
+};
+
+static struct netxbig_led_platform_data net5big_v2_leds_data = {
+ .gpio_ext = &netxbig_v2_gpio_ext,
+ .timer = netxbig_v2_led_timer,
+ .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
+ .leds = net5big_v2_leds_ctrl,
+ .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl),
+};
+
+static struct platform_device netxbig_v2_leds = {
+ .name = "leds-netxbig",
+ .id = -1,
+ .dev = {
+ .platform_data = &net2big_v2_leds_data,
+ },
+};
+
+void __init netxbig_init(void)
+{
+
+ if (of_machine_is_compatible("lacie,net5big_v2"))
+ netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
+ platform_device_register(&netxbig_v2_leds);
+}
diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c
index 96c2c59..43aaf3f 100644
--- a/arch/arm/mach-mvebu/platsmp-a9.c
+++ b/arch/arm/mach-mvebu/platsmp-a9.c
@@ -33,7 +33,7 @@
extern unsigned char armada_375_smp_cpu1_enable_code_end;
extern unsigned char armada_375_smp_cpu1_enable_code_start;
-void armada_375_smp_cpu1_enable_wa(void)
+static void armada_375_smp_cpu1_enable_wa(void)
{
void __iomem *sram_virt_base;
@@ -91,9 +91,6 @@
static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = {
.smp_boot_secondary = mvebu_cortex_a9_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
- .cpu_die = armada_xp_cpu_die,
-#endif
};
CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp",
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index 88b976b3..b6fa9f0 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -78,6 +78,17 @@
hw_cpu = cpu_logical_map(cpu);
mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup);
+
+ /*
+ * This is needed to wake up CPUs in the offline state after
+ * using CPU hotplug.
+ */
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+ /*
+ * This is needed to take secondary CPUs out of reset on the
+ * initial boot.
+ */
ret = mvebu_cpu_reset_deassert(hw_cpu);
if (ret) {
pr_warn("unable to boot CPU: %d\n", ret);
@@ -87,6 +98,19 @@
return 0;
}
+/*
+ * When a CPU is brought back online, either through CPU hotplug, or
+ * because of the boot of a kexec'ed kernel, the PMSU configuration
+ * for this CPU might be in the deep idle state, preventing this CPU
+ * from receiving interrupts. Here, we therefore take out the current
+ * CPU from this state, which was entered by armada_xp_cpu_die()
+ * below.
+ */
+static void armada_xp_secondary_init(unsigned int cpu)
+{
+ armada_370_xp_pmsu_idle_exit();
+}
+
static void __init armada_xp_smp_init_cpus(void)
{
unsigned int ncores = num_possible_cpus();
@@ -122,12 +146,36 @@
panic("The address for the BootROM is incorrect");
}
+#ifdef CONFIG_HOTPLUG_CPU
+static void armada_xp_cpu_die(unsigned int cpu)
+{
+ /*
+ * CPU hotplug is implemented by putting offline CPUs into the
+ * deep idle sleep state.
+ */
+ armada_370_xp_pmsu_idle_enter(true);
+}
+
+/*
+ * We need a dummy function, so that platform_can_cpu_hotplug() knows
+ * we support CPU hotplug. However, the function does not need to do
+ * anything, because CPUs going offline can enter the deep idle state
+ * by themselves, without any help from a still alive CPU.
+ */
+static int armada_xp_cpu_kill(unsigned int cpu)
+{
+ return 1;
+}
+#endif
+
struct smp_operations armada_xp_smp_ops __initdata = {
.smp_init_cpus = armada_xp_smp_init_cpus,
.smp_prepare_cpus = armada_xp_smp_prepare_cpus,
.smp_boot_secondary = armada_xp_boot_secondary,
+ .smp_secondary_init = armada_xp_secondary_init,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = armada_xp_cpu_die,
+ .cpu_kill = armada_xp_cpu_kill,
#endif
};
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index a1d407c..b31a829 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -143,13 +143,13 @@
}
/* No locking is needed because we only access per-CPU registers */
-void armada_370_xp_pmsu_idle_prepare(bool deepidle)
+int armada_370_xp_pmsu_idle_enter(unsigned long deepidle)
{
unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
u32 reg;
if (pmsu_mp_base == NULL)
- return;
+ return -EINVAL;
/*
* Adjust the PMSU configuration to wait for WFI signal, enable
@@ -178,11 +178,6 @@
reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP;
writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
-}
-
-static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle)
-{
- armada_370_xp_pmsu_idle_prepare(deepidle);
v7_exit_coherency_flush(all);
@@ -201,12 +196,12 @@
/* Test the CR_C bit and set it if it was cleared */
asm volatile(
- "mrc p15, 0, %0, c1, c0, 0 \n\t"
- "tst %0, #(1 << 2) \n\t"
- "orreq %0, %0, #(1 << 2) \n\t"
- "mcreq p15, 0, %0, c1, c0, 0 \n\t"
+ "mrc p15, 0, r0, c1, c0, 0 \n\t"
+ "tst r0, #(1 << 2) \n\t"
+ "orreq r0, r0, #(1 << 2) \n\t"
+ "mcreq p15, 0, r0, c1, c0, 0 \n\t"
"isb "
- : : "r" (0));
+ : : : "r0");
pr_warn("Failed to suspend the system\n");
@@ -215,11 +210,11 @@
static int armada_370_xp_cpu_suspend(unsigned long deepidle)
{
- return cpu_suspend(deepidle, do_armada_370_xp_cpu_suspend);
+ return cpu_suspend(deepidle, armada_370_xp_pmsu_idle_enter);
}
/* No locking is needed because we only access per-CPU registers */
-static noinline void armada_370_xp_pmsu_idle_restore(void)
+void armada_370_xp_pmsu_idle_exit(void)
{
unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
u32 reg;
@@ -248,7 +243,7 @@
unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_370_xp_cpu_resume);
} else if (action == CPU_PM_EXIT) {
- armada_370_xp_pmsu_idle_restore();
+ armada_370_xp_pmsu_idle_exit();
}
return NOTIFY_OK;
@@ -258,7 +253,7 @@
.notifier_call = armada_370_xp_cpu_pm_notify,
};
-int __init armada_370_xp_cpu_pm_init(void)
+static int __init armada_370_xp_cpu_pm_init(void)
{
struct device_node *np;
diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
index 0c5524a..b2b4e3d 100644
--- a/arch/arm/mach-mvebu/system-controller.c
+++ b/arch/arm/mach-mvebu/system-controller.c
@@ -39,6 +39,9 @@
u32 system_soft_reset;
u32 resume_boot_addr;
+
+ u32 dev_id;
+ u32 rev_id;
};
static struct mvebu_system_controller *mvebu_sc;
@@ -47,6 +50,8 @@
.system_soft_reset_offset = 0x64,
.rstoutn_mask_reset_out_en = 0x1,
.system_soft_reset = 0x1,
+ .dev_id = 0x38,
+ .rev_id = 0x3c,
};
static const struct mvebu_system_controller armada_375_system_controller = {
@@ -55,6 +60,8 @@
.rstoutn_mask_reset_out_en = 0x1,
.system_soft_reset = 0x1,
.resume_boot_addr = 0xd4,
+ .dev_id = 0x38,
+ .rev_id = 0x3c,
};
static const struct mvebu_system_controller orion_system_controller = {
@@ -101,6 +108,18 @@
;
}
+int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev)
+{
+ if (of_machine_is_compatible("marvell,armada380") &&
+ system_controller_base) {
+ *dev = readl(system_controller_base + mvebu_sc->dev_id) >> 16;
+ *rev = (readl(system_controller_base + mvebu_sc->rev_id) >> 8)
+ & 0xF;
+ return 0;
+ } else
+ return -ENODEV;
+}
+
#ifdef CONFIG_SMP
void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr)
{
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8ca99e9..863ec46 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -202,6 +202,7 @@
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
# hwmod data
+obj-y += omap_hwmod_common_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 67fd26a..b2ff6cd 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -21,10 +21,7 @@
#include <asm/div64.h>
-#include "soc.h"
#include "clock.h"
-#include "cm-regbits-24xx.h"
-#include "cm-regbits-34xx.h"
/* DPLL rate rounding: minimum DPLL multiplier, divider values */
#define DPLL_MIN_MULTIPLIER 2
@@ -44,20 +41,12 @@
#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
(DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
-/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
-#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
-#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
-#define OMAP3430_DPLL_FINT_BAND2_MIN 7500000
-#define OMAP3430_DPLL_FINT_BAND2_MAX 21000000
-
/*
* DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
* From device data manual section 4.3 "DPLL and DLL Specifications".
*/
#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000
#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000
-#define OMAP3PLUS_DPLL_FINT_MIN 32000
-#define OMAP3PLUS_DPLL_FINT_MAX 52000000
/* _dpll_test_fint() return codes */
#define DPLL_FINT_UNDERFLOW -1
@@ -87,33 +76,31 @@
/* DPLL divider must result in a valid jitter correction val */
fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
- if (cpu_is_omap24xx()) {
- /* Should not be called for OMAP2, so warn if it is called */
- WARN(1, "No fint limits available for OMAP2!\n");
- return DPLL_FINT_INVALID;
- } else if (cpu_is_omap3430()) {
- fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
- fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
- } else if (dd->flags & DPLL_J_TYPE) {
+ if (dd->flags & DPLL_J_TYPE) {
fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
} else {
- fint_min = OMAP3PLUS_DPLL_FINT_MIN;
- fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+ fint_min = ti_clk_features.fint_min;
+ fint_max = ti_clk_features.fint_max;
}
- if (fint < fint_min) {
+ if (!fint_min || !fint_max) {
+ WARN(1, "No fint limits available!\n");
+ return DPLL_FINT_INVALID;
+ }
+
+ if (fint < ti_clk_features.fint_min) {
pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
n);
dd->max_divider = n;
ret = DPLL_FINT_UNDERFLOW;
- } else if (fint > fint_max) {
+ } else if (fint > ti_clk_features.fint_max) {
pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
n);
dd->min_divider = n;
ret = DPLL_FINT_INVALID;
- } else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX &&
- fint < OMAP3430_DPLL_FINT_BAND2_MIN) {
+ } else if (fint > ti_clk_features.fint_band1_max &&
+ fint < ti_clk_features.fint_band2_min) {
pr_debug("rejecting n=%d due to Fint failure\n", n);
ret = DPLL_FINT_INVALID;
}
@@ -185,6 +172,34 @@
return r;
}
+/**
+ * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not
+ * @v: bitfield value of the DPLL enable
+ *
+ * Checks given DPLL enable bitfield to see whether the DPLL is in bypass
+ * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise.
+ */
+static int _omap2_dpll_is_in_bypass(u32 v)
+{
+ u8 mask, val;
+
+ mask = ti_clk_features.dpll_bypass_vals;
+
+ /*
+ * Each set bit in the mask corresponds to a bypass value equal
+ * to the bitshift. Go through each set-bit in the mask and
+ * compare against the given register value.
+ */
+ while (mask) {
+ val = __ffs(mask);
+ mask ^= (1 << val);
+ if (v == val)
+ return 1;
+ }
+
+ return 0;
+}
+
/* Public functions */
u8 omap2_init_dpll_parent(struct clk_hw *hw)
{
@@ -201,20 +216,9 @@
v >>= __ffs(dd->enable_mask);
/* Reparent the struct clk in case the dpll is in bypass */
- if (cpu_is_omap24xx()) {
- if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
- v == OMAP2XXX_EN_DPLL_FRBYPASS)
- return 1;
- } else if (cpu_is_omap34xx()) {
- if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
- v == OMAP3XXX_EN_DPLL_FRBYPASS)
- return 1;
- } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) {
- if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
- v == OMAP4XXX_EN_DPLL_FRBYPASS ||
- v == OMAP4XXX_EN_DPLL_MNBYPASS)
- return 1;
- }
+ if (_omap2_dpll_is_in_bypass(v))
+ return 1;
+
return 0;
}
@@ -247,20 +251,8 @@
v &= dd->enable_mask;
v >>= __ffs(dd->enable_mask);
- if (cpu_is_omap24xx()) {
- if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
- v == OMAP2XXX_EN_DPLL_FRBYPASS)
- return __clk_get_rate(dd->clk_bypass);
- } else if (cpu_is_omap34xx()) {
- if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
- v == OMAP3XXX_EN_DPLL_FRBYPASS)
- return __clk_get_rate(dd->clk_bypass);
- } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) {
- if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
- v == OMAP4XXX_EN_DPLL_FRBYPASS ||
- v == OMAP4XXX_EN_DPLL_MNBYPASS)
- return __clk_get_rate(dd->clk_bypass);
- }
+ if (_omap2_dpll_is_in_bypass(v))
+ return __clk_get_rate(dd->clk_bypass);
v = omap2_clk_readl(clk, dd->mult_div1_reg);
dpll_mult = v & dd->mult_mask;
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
index 333f0a6..55eb579 100644
--- a/arch/arm/mach-omap2/clkt_iclk.c
+++ b/arch/arm/mach-omap2/clkt_iclk.c
@@ -14,11 +14,11 @@
#include <linux/clk-provider.h>
#include <linux/io.h>
-
#include "clock.h"
-#include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
+
+/* Register offsets */
+#define CM_AUTOIDLE 0x30
+#define CM_ICLKEN 0x10
/* Private functions */
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 591581a..5a0cac9 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -47,6 +47,24 @@
u16 cpu_mask;
/*
+ * Clock features setup. Used instead of CPU type checks.
+ */
+struct ti_clk_features ti_clk_features;
+
+/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
+#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
+#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
+#define OMAP3430_DPLL_FINT_BAND2_MIN 7500000
+#define OMAP3430_DPLL_FINT_BAND2_MAX 21000000
+
+/*
+ * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
+ * From device data manual section 4.3 "DPLL and DLL Specifications".
+ */
+#define OMAP3PLUS_DPLL_FINT_MIN 32000
+#define OMAP3PLUS_DPLL_FINT_MAX 52000000
+
+/*
* clkdm_control: if true, then when a clock is enabled in the
* hardware, its clockdomain will first be enabled; and when a clock
* is disabled in the hardware, its clockdomain will be disabled
@@ -287,13 +305,7 @@
* 34xx reverses this, just to keep us on our toes
* AM35xx uses both, depending on the module.
*/
- if (cpu_is_omap24xx())
- *idlest_val = OMAP24XX_CM_IDLEST_VAL;
- else if (cpu_is_omap34xx())
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
- else
- BUG();
-
+ *idlest_val = ti_clk_features.cm_idlest_val;
}
/**
@@ -731,3 +743,53 @@
(clk_get_rate(core_ck) / 1000000),
(clk_get_rate(mpu_ck) / 1000000));
}
+
+/**
+ * ti_clk_init_features - init clock features struct for the SoC
+ *
+ * Initializes the clock features struct based on the SoC type.
+ */
+void __init ti_clk_init_features(void)
+{
+ /* Fint setup for DPLLs */
+ if (cpu_is_omap3430()) {
+ ti_clk_features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+ ti_clk_features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+ ti_clk_features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
+ ti_clk_features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
+ } else {
+ ti_clk_features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+ ti_clk_features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+ }
+
+ /* Bypass value setup for DPLLs */
+ if (cpu_is_omap24xx()) {
+ ti_clk_features.dpll_bypass_vals |=
+ (1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
+ (1 << OMAP2XXX_EN_DPLL_FRBYPASS);
+ } else if (cpu_is_omap34xx()) {
+ ti_clk_features.dpll_bypass_vals |=
+ (1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
+ (1 << OMAP3XXX_EN_DPLL_FRBYPASS);
+ } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() ||
+ soc_is_omap54xx() || soc_is_dra7xx()) {
+ ti_clk_features.dpll_bypass_vals |=
+ (1 << OMAP4XXX_EN_DPLL_LPBYPASS) |
+ (1 << OMAP4XXX_EN_DPLL_FRBYPASS) |
+ (1 << OMAP4XXX_EN_DPLL_MNBYPASS);
+ }
+
+ /* Jitter correction only available on OMAP343X */
+ if (cpu_is_omap343x())
+ ti_clk_features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
+
+ /* Idlest value for interface clocks.
+ * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+ * 34xx reverses this, just to keep us on our toes
+ * AM35xx uses both, depending on the module.
+ */
+ if (cpu_is_omap24xx())
+ ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
+ else if (cpu_is_omap34xx())
+ ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 12f54d4..0f100dc 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -101,31 +101,6 @@
}; \
DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
-#define DEFINE_CLK_OMAP_HSDIVIDER(_name, _parent_name, \
- _parent_ptr, _flags, \
- _clksel_reg, _clksel_mask) \
- static const struct clksel _name##_div[] = { \
- { \
- .parent = _parent_ptr, \
- .rates = div31_1to31_rates \
- }, \
- { .parent = NULL }, \
- }; \
- static struct clk _name; \
- static const char *_name##_parent_names[] = { \
- _parent_name, \
- }; \
- static struct clk_hw_omap _name##_hw = { \
- .hw = { \
- .clk = &_name, \
- }, \
- .clksel = _name##_div, \
- .clksel_reg = _clksel_reg, \
- .clksel_mask = _clksel_mask, \
- .ops = &clkhwops_omap4_dpllmx, \
- }; \
- DEFINE_STRUCT_CLK(_name, _name##_parent_names, omap_hsdivider_ops);
-
/* struct clksel_rate.flags possibilities */
#define RATE_IN_242X (1 << 0)
#define RATE_IN_243X (1 << 1)
@@ -248,6 +223,23 @@
extern u16 cpu_mask;
+/*
+ * Clock features setup. Used instead of CPU type checks.
+ */
+struct ti_clk_features {
+ u32 flags;
+ long fint_min;
+ long fint_max;
+ long fint_band1_max;
+ long fint_band2_min;
+ u8 dpll_bypass_vals;
+ u8 cm_idlest_val;
+};
+
+#define TI_CLK_DPLL_HAS_FREQSEL (1 << 0)
+
+extern struct ti_clk_features ti_clk_features;
+
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_dummy;
extern const struct clkops clkops_omap2_dflt;
@@ -286,4 +278,6 @@
extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
extern void omap_clocks_register(struct omap_clk *oclks, int cnt);
+
+void __init ti_clk_init_features(void);
#endif
diff --git a/arch/arm/mach-omap2/cm2_7xx.h b/arch/arm/mach-omap2/cm2_7xx.h
index 9ad7594..e966e3a 100644
--- a/arch/arm/mach-omap2/cm2_7xx.h
+++ b/arch/arm/mach-omap2/cm2_7xx.h
@@ -357,6 +357,10 @@
#define DRA7XX_CM_L3INIT_SATA_CLKCTRL DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0088)
#define DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET 0x00a0
#define DRA7XX_CM_PCIE_STATICDEP_OFFSET 0x00a4
+#define DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET 0x00b0
+#define DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00b0)
+#define DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET 0x00b8
+#define DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00b8)
#define DRA7XX_CM_GMAC_CLKSTCTRL_OFFSET 0x00c0
#define DRA7XX_CM_GMAC_STATICDEP_OFFSET 0x00c4
#define DRA7XX_CM_GMAC_DYNAMICDEP_OFFSET 0x00c8
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 751f354..f4796c0 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -44,8 +44,7 @@
};
struct omap3_scratchpad_prcm_block {
- u32 prm_clksrc_ctrl;
- u32 prm_clksel;
+ u32 prm_contents[2];
u32 cm_contents[11];
u32 prcm_block_size;
};
@@ -282,13 +281,9 @@
void __iomem *v_addr;
u32 offset = 0;
v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
- if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
- OMAP3430_GLOBAL_COLD_RST_MASK) {
+ if (omap3xxx_prm_clear_global_cold_reset()) {
for ( ; offset <= max_offset; offset += 0x4)
writel_relaxed(0x0, (v_addr + offset));
- omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
- OMAP3430_GR_MOD,
- OMAP3_PRM_RSTST_OFFSET);
}
}
@@ -331,13 +326,7 @@
scratchpad_contents.sdrc_block_offset = 0x64;
/* Populate the PRCM block contents */
- prcm_block_contents.prm_clksrc_ctrl =
- omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
- OMAP3_PRM_CLKSRC_CTRL_OFFSET);
- prcm_block_contents.prm_clksel =
- omap2_prm_read_mod_reg(OMAP3430_CCR_MOD,
- OMAP3_PRM_CLKSEL_OFFSET);
-
+ omap3_prm_save_scratchpad_contents(prcm_block_contents.prm_contents);
omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents);
prcm_block_contents.prcm_block_size = 0x0;
@@ -575,9 +564,50 @@
* Sets the bootmode for IVA2 to idle. This is needed by the PM code to
* force disable IVA2 so that it does not prevent any low-power states.
*/
-void omap3_ctrl_set_iva_bootmode_idle(void)
+static void __init omap3_ctrl_set_iva_bootmode_idle(void)
{
omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
OMAP343X_CONTROL_IVA2_BOOTMOD);
}
+
+/**
+ * omap3_ctrl_setup_d2d_padconf - setup stacked modem pads for idle
+ *
+ * Sets up the pads controlling the stacked modem in such way that the
+ * device can enter idle.
+ */
+static void __init omap3_ctrl_setup_d2d_padconf(void)
+{
+ u16 mask, padconf;
+
+ /*
+ * In a stand alone OMAP3430 where there is not a stacked
+ * modem for the D2D Idle Ack and D2D MStandby must be pulled
+ * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
+ * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up.
+ */
+ mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
+ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
+ padconf |= mask;
+ omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
+
+ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
+ padconf |= mask;
+ omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+}
+
+/**
+ * omap3_ctrl_init - does static initializations for control module
+ *
+ * Initializes system control module. This sets up the sysconfig autoidle,
+ * and sets up modem and iva2 so that they can be idled properly.
+ */
+void __init omap3_ctrl_init(void)
+{
+ omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
+
+ omap3_ctrl_set_iva_bootmode_idle();
+
+ omap3_ctrl_setup_d2d_padconf();
+}
#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index da05480..a3c0133 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -16,11 +16,6 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
#define __ARCH_ARM_MACH_OMAP2_CONTROL_H
-#include "ctrl_module_core_44xx.h"
-#include "ctrl_module_wkup_44xx.h"
-#include "ctrl_module_pad_core_44xx.h"
-#include "ctrl_module_pad_wkup_44xx.h"
-
#include "am33xx.h"
#ifndef __ASSEMBLY__
@@ -254,6 +249,39 @@
/* TI81XX CONTROL_DEVCONF register offsets */
#define TI81XX_CONTROL_DEVICE_ID (TI81XX_CONTROL_DEVCONF + 0x000)
+/* OMAP4 CONTROL MODULE */
+#define OMAP4_CTRL_MODULE_PAD_WKUP 0x4a31e000
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2 0x0604
+#define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1 0x0218
+#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY 0x0618
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608
+
+/* OMAP4 CONTROL_DSIPHY */
+#define OMAP4_DSI2_LANEENABLE_SHIFT 29
+#define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29)
+#define OMAP4_DSI1_LANEENABLE_SHIFT 24
+#define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24)
+#define OMAP4_DSI1_PIPD_SHIFT 19
+#define OMAP4_DSI1_PIPD_MASK (0x1f << 19)
+#define OMAP4_DSI2_PIPD_SHIFT 14
+#define OMAP4_DSI2_PIPD_MASK (0x1f << 14)
+
+/* OMAP4 CONTROL_CAMERA_RX */
+#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT 24
+#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK (0x1f << 24)
+#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT 29
+#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK (0x3 << 29)
+#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT 21
+#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK (1 << 21)
+#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT 19
+#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK (0x3 << 19)
+#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT 18
+#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK (1 << 18)
+#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT 16
+#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK (0x3 << 16)
+
/* OMAP54XX CONTROL STATUS register */
#define OMAP5XXX_CONTROL_STATUS 0x134
#define OMAP5_DEVICETYPE_MASK (0x7 << 6)
@@ -427,7 +455,7 @@
extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
extern void omap3630_ctrl_disable_rta(void);
extern int omap3_ctrl_save_padconf(void);
-extern void omap3_ctrl_set_iva_bootmode_idle(void);
+void omap3_ctrl_init(void);
extern void omap2_set_globals_control(void __iomem *ctrl,
void __iomem *ctrl_pad);
#else
diff --git a/arch/arm/mach-omap2/ctrl_module_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_core_44xx.h
deleted file mode 100644
index 0197082..0000000
--- a/arch/arm/mach-omap2/ctrl_module_core_44xx.h
+++ /dev/null
@@ -1,392 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_CORE registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_CORE 0x4a002000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_CORE_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_CORE_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_CORE_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_0 0x0200
-#define OMAP4_CTRL_MODULE_CORE_ID_CODE 0x0204
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_1 0x0208
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_2 0x020c
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_3 0x0210
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_0 0x0214
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1 0x0218
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_USB_CONF 0x021c
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_VDD_WKUP 0x0228
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_BGAP 0x0260
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_0 0x0264
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1 0x0268
-#define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4
-#define OMAP4_CTRL_MODULE_CORE_DEV_CONF 0x0300
-#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304
-#define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL 0x0314
-#define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL 0x0318
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL 0x0320
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_MPU_VOLTAGE_CTRL 0x0324
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_CORE_VOLTAGE_CTRL 0x0328
-#define OMAP4_CTRL_MODULE_CORE_TEMP_SENSOR 0x032c
-#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_0 0x0330
-#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_1 0x0334
-#define OMAP4_CTRL_MODULE_CORE_USBOTGHS_CONTROL 0x033c
-#define OMAP4_CTRL_MODULE_CORE_DSS_CONTROL 0x0340
-#define OMAP4_CTRL_MODULE_CORE_HWOBS_CONTROL 0x0350
-#define OMAP4_CTRL_MODULE_CORE_DEBOBS_FINAL_MUX_SEL 0x0400
-#define OMAP4_CTRL_MODULE_CORE_DEBOBS_MMR_MPU 0x0408
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL0 0x042c
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL1 0x0430
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL2 0x0434
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL3 0x0438
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL0 0x0440
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL1 0x0444
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL2 0x0448
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_FREQLOCK_SEL 0x044c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_TINITZ_SEL 0x0450
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_PHASELOCK_SEL 0x0454
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_0 0x0480
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_1 0x0484
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_2 0x0488
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_3 0x048c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_4 0x0490
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_5 0x0494
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_6 0x0498
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_7 0x049c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_8 0x04a0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_9 0x04a4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_10 0x04a8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_11 0x04ac
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_12 0x04b0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_13 0x04b4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_14 0x04b8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_15 0x04bc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_16 0x04c0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_17 0x04c4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_18 0x04c8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_19 0x04cc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_20 0x04d0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_21 0x04d4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_22 0x04d8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_23 0x04dc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_24 0x04e0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_25 0x04e4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_26 0x04e8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_27 0x04ec
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_28 0x04f0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_29 0x04f4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_30 0x04f8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_31 0x04fc
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* STD_FUSE_DIE_ID_0 */
-#define OMAP4_STD_FUSE_DIE_ID_0_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_0_MASK (0xffffffff << 0)
-
-/* ID_CODE */
-#define OMAP4_STD_FUSE_IDCODE_SHIFT 0
-#define OMAP4_STD_FUSE_IDCODE_MASK (0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_1 */
-#define OMAP4_STD_FUSE_DIE_ID_1_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_1_MASK (0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_2 */
-#define OMAP4_STD_FUSE_DIE_ID_2_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_2_MASK (0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_3 */
-#define OMAP4_STD_FUSE_DIE_ID_3_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_3_MASK (0xffffffff << 0)
-
-/* STD_FUSE_PROD_ID_0 */
-#define OMAP4_STD_FUSE_PROD_ID_0_SHIFT 0
-#define OMAP4_STD_FUSE_PROD_ID_0_MASK (0xffffffff << 0)
-
-/* STD_FUSE_PROD_ID_1 */
-#define OMAP4_STD_FUSE_PROD_ID_1_SHIFT 0
-#define OMAP4_STD_FUSE_PROD_ID_1_MASK (0xffffffff << 0)
-
-/* STD_FUSE_USB_CONF */
-#define OMAP4_USB_PROD_ID_SHIFT 16
-#define OMAP4_USB_PROD_ID_MASK (0xffff << 16)
-#define OMAP4_USB_VENDOR_ID_SHIFT 0
-#define OMAP4_USB_VENDOR_ID_MASK (0xffff << 0)
-
-/* STD_FUSE_OPP_VDD_WKUP */
-#define OMAP4_STD_FUSE_OPP_VDD_WKUP_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_VDD_WKUP_MASK (0xffffffff << 0)
-
-/* STD_FUSE_OPP_BGAP */
-#define OMAP4_STD_FUSE_OPP_BGAP_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_BGAP_MASK (0xffffffff << 0)
-
-/* STD_FUSE_OPP_DPLL_0 */
-#define OMAP4_STD_FUSE_OPP_DPLL_0_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_DPLL_0_MASK (0xffffffff << 0)
-
-/* STD_FUSE_OPP_DPLL_1 */
-#define OMAP4_STD_FUSE_OPP_DPLL_1_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_DPLL_1_MASK (0xffffffff << 0)
-
-/* STATUS */
-#define OMAP4_ATTILA_CONF_SHIFT 11
-#define OMAP4_ATTILA_CONF_MASK (0x3 << 11)
-#define OMAP4_DEVICE_TYPE_SHIFT 8
-#define OMAP4_DEVICE_TYPE_MASK (0x7 << 8)
-#define OMAP4_SYS_BOOT_SHIFT 0
-#define OMAP4_SYS_BOOT_MASK (0xff << 0)
-
-/* DEV_CONF */
-#define OMAP4_DEV_CONF_SHIFT 1
-#define OMAP4_DEV_CONF_MASK (0x7fffffff << 1)
-#define OMAP4_USBPHY_PD_SHIFT 0
-#define OMAP4_USBPHY_PD_MASK (1 << 0)
-
-/* LDOVBB_IVA_VOLTAGE_CTRL */
-#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOVBBIVA_RBB_VSET_IN_SHIFT 21
-#define OMAP4_LDOVBBIVA_RBB_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_SHIFT 16
-#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOVBBIVA_FBB_VSET_IN_SHIFT 5
-#define OMAP4_LDOVBBIVA_FBB_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_SHIFT 0
-#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOVBB_MPU_VOLTAGE_CTRL */
-#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOVBBMPU_RBB_VSET_IN_SHIFT 21
-#define OMAP4_LDOVBBMPU_RBB_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_SHIFT 16
-#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOVBBMPU_FBB_VSET_IN_SHIFT 5
-#define OMAP4_LDOVBBMPU_FBB_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_SHIFT 0
-#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOSRAM_IVA_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_SHIFT 21
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_SHIFT 16
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_SHIFT 5
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_SHIFT 0
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOSRAM_MPU_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_SHIFT 21
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_SHIFT 16
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_SHIFT 5
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_SHIFT 0
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOSRAM_CORE_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_SHIFT 21
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_SHIFT 16
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_SHIFT 5
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_SHIFT 0
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_MASK (0x1f << 0)
-
-/* TEMP_SENSOR */
-#define OMAP4_BGAP_TEMPSOFF_SHIFT 12
-#define OMAP4_BGAP_TEMPSOFF_MASK (1 << 12)
-#define OMAP4_BGAP_TSHUT_SHIFT 11
-#define OMAP4_BGAP_TSHUT_MASK (1 << 11)
-#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_SHIFT 10
-#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_MASK (1 << 10)
-#define OMAP4_BGAP_TEMP_SENSOR_SOC_SHIFT 9
-#define OMAP4_BGAP_TEMP_SENSOR_SOC_MASK (1 << 9)
-#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_SHIFT 8
-#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_MASK (1 << 8)
-#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0
-#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0)
-
-/* DPLL_NWELL_TRIM_0 */
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_SHIFT 29
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_MASK (1 << 29)
-#define OMAP4_DPLL_ABE_NWELL_TRIM_SHIFT 24
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MASK (0x1f << 24)
-#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_SHIFT 23
-#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_MASK (1 << 23)
-#define OMAP4_DPLL_PER_NWELL_TRIM_SHIFT 18
-#define OMAP4_DPLL_PER_NWELL_TRIM_MASK (0x1f << 18)
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_SHIFT 17
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_MASK (1 << 17)
-#define OMAP4_DPLL_CORE_NWELL_TRIM_SHIFT 12
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MASK (0x1f << 12)
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_SHIFT 11
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_MASK (1 << 11)
-#define OMAP4_DPLL_IVA_NWELL_TRIM_SHIFT 6
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MASK (0x1f << 6)
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_SHIFT 5
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_MASK (1 << 5)
-#define OMAP4_DPLL_MPU_NWELL_TRIM_SHIFT 0
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MASK (0x1f << 0)
-
-/* DPLL_NWELL_TRIM_1 */
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_SHIFT 29
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_MASK (1 << 29)
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_SHIFT 24
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MASK (0x1f << 24)
-#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_SHIFT 23
-#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_MASK (1 << 23)
-#define OMAP4_DPLL_USB_NWELL_TRIM_SHIFT 18
-#define OMAP4_DPLL_USB_NWELL_TRIM_MASK (0x1f << 18)
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_SHIFT 17
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_MASK (1 << 17)
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_SHIFT 12
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MASK (0x1f << 12)
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_SHIFT 11
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_MASK (1 << 11)
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_SHIFT 6
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MASK (0x1f << 6)
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_SHIFT 5
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_MASK (1 << 5)
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_SHIFT 0
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MASK (0x1f << 0)
-
-/* USBOTGHS_CONTROL */
-#define OMAP4_DISCHRGVBUS_SHIFT 8
-#define OMAP4_DISCHRGVBUS_MASK (1 << 8)
-#define OMAP4_CHRGVBUS_SHIFT 7
-#define OMAP4_CHRGVBUS_MASK (1 << 7)
-#define OMAP4_DRVVBUS_SHIFT 6
-#define OMAP4_DRVVBUS_MASK (1 << 6)
-#define OMAP4_IDPULLUP_SHIFT 5
-#define OMAP4_IDPULLUP_MASK (1 << 5)
-#define OMAP4_IDDIG_SHIFT 4
-#define OMAP4_IDDIG_MASK (1 << 4)
-#define OMAP4_SESSEND_SHIFT 3
-#define OMAP4_SESSEND_MASK (1 << 3)
-#define OMAP4_VBUSVALID_SHIFT 2
-#define OMAP4_VBUSVALID_MASK (1 << 2)
-#define OMAP4_BVALID_SHIFT 1
-#define OMAP4_BVALID_MASK (1 << 1)
-#define OMAP4_AVALID_SHIFT 0
-#define OMAP4_AVALID_MASK (1 << 0)
-
-/* DSS_CONTROL */
-#define OMAP4_DSS_MUX6_SELECT_SHIFT 0
-#define OMAP4_DSS_MUX6_SELECT_MASK (1 << 0)
-
-/* HWOBS_CONTROL */
-#define OMAP4_HWOBS_CLKDIV_SEL_SHIFT 3
-#define OMAP4_HWOBS_CLKDIV_SEL_MASK (0x1f << 3)
-#define OMAP4_HWOBS_ALL_ZERO_MODE_SHIFT 2
-#define OMAP4_HWOBS_ALL_ZERO_MODE_MASK (1 << 2)
-#define OMAP4_HWOBS_ALL_ONE_MODE_SHIFT 1
-#define OMAP4_HWOBS_ALL_ONE_MODE_MASK (1 << 1)
-#define OMAP4_HWOBS_MACRO_ENABLE_SHIFT 0
-#define OMAP4_HWOBS_MACRO_ENABLE_MASK (1 << 0)
-
-/* DEBOBS_FINAL_MUX_SEL */
-#define OMAP4_SELECT_SHIFT 0
-#define OMAP4_SELECT_MASK (0xffffffff << 0)
-
-/* DEBOBS_MMR_MPU */
-#define OMAP4_SELECT_DEBOBS_MMR_MPU_SHIFT 0
-#define OMAP4_SELECT_DEBOBS_MMR_MPU_MASK (0xf << 0)
-
-/* CONF_SDMA_REQ_SEL0 */
-#define OMAP4_MULT_SHIFT 0
-#define OMAP4_MULT_MASK (0x7f << 0)
-
-/* CONF_CLK_SEL0 */
-#define OMAP4_MULT_CONF_CLK_SEL0_SHIFT 0
-#define OMAP4_MULT_CONF_CLK_SEL0_MASK (0x7 << 0)
-
-/* CONF_CLK_SEL1 */
-#define OMAP4_MULT_CONF_CLK_SEL1_SHIFT 0
-#define OMAP4_MULT_CONF_CLK_SEL1_MASK (0x7 << 0)
-
-/* CONF_CLK_SEL2 */
-#define OMAP4_MULT_CONF_CLK_SEL2_SHIFT 0
-#define OMAP4_MULT_CONF_CLK_SEL2_MASK (0x7 << 0)
-
-/* CONF_DPLL_FREQLOCK_SEL */
-#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_SHIFT 0
-#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_MASK (0x7 << 0)
-
-/* CONF_DPLL_TINITZ_SEL */
-#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_SHIFT 0
-#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_MASK (0x7 << 0)
-
-/* CONF_DPLL_PHASELOCK_SEL */
-#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_SHIFT 0
-#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_MASK (0x7 << 0)
-
-/* CONF_DEBUG_SEL_TST_0 */
-#define OMAP4_MODE_SHIFT 0
-#define OMAP4_MODE_MASK (0xf << 0)
-
-#endif
diff --git a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
deleted file mode 100644
index c88420d..0000000
--- a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
+++ /dev/null
@@ -1,1409 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_PAD_CORE registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_PAD_CORE 0x4a100000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_0 0x01d8
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_1 0x01dc
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_2 0x01e0
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_3 0x01e4
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_4 0x01e8
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_5 0x01ec
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_6 0x01f0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_GLOBAL 0x05a0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_MODE 0x05a4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_0 0x05a8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_1 0x05ac
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_0 0x05b0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_1 0x05b4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_0 0x05b8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_1 0x05bc
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2 0x05c0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC 0x05c4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS 0x05c8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE 0x0600
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0 0x0604
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_AVDAC 0x060c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDMI_TX_PHY 0x0610
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC2 0x0614
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY 0x0618
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP 0x061c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB2PHYCORE 0x0620
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1 0x0624
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1 0x0628
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HSI 0x062c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB 0x0630
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDQ 0x0634
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_0 0x0638
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_1 0x063c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_2 0x0640
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_3 0x0644
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_0 0x0648
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_1 0x064c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_2 0x0650
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_3 0x0654
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_BUS_HOLD 0x0658
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_C2C 0x065c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_RW 0x0660
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R 0x0664
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R_C0 0x0668
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_1 0x0700
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_2 0x0704
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_3 0x0708
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_4 0x070c
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* PADCONF_WAKEUPEVENT_0 */
-#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_1 */
-#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_2 */
-#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_3 */
-#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_4 */
-#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_5 */
-#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_6 */
-#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* CONTROL_PADCONF_GLOBAL */
-#define OMAP4_FORCE_OFFMODE_EN_SHIFT 31
-#define OMAP4_FORCE_OFFMODE_EN_MASK (1 << 31)
-
-/* CONTROL_PADCONF_MODE */
-#define OMAP4_VDDS_DV_BANK0_SHIFT 31
-#define OMAP4_VDDS_DV_BANK0_MASK (1 << 31)
-#define OMAP4_VDDS_DV_BANK1_SHIFT 30
-#define OMAP4_VDDS_DV_BANK1_MASK (1 << 30)
-#define OMAP4_VDDS_DV_BANK3_SHIFT 29
-#define OMAP4_VDDS_DV_BANK3_MASK (1 << 29)
-#define OMAP4_VDDS_DV_BANK4_SHIFT 28
-#define OMAP4_VDDS_DV_BANK4_MASK (1 << 28)
-#define OMAP4_VDDS_DV_BANK5_SHIFT 27
-#define OMAP4_VDDS_DV_BANK5_MASK (1 << 27)
-#define OMAP4_VDDS_DV_BANK6_SHIFT 26
-#define OMAP4_VDDS_DV_BANK6_MASK (1 << 26)
-#define OMAP4_VDDS_DV_C2C_SHIFT 25
-#define OMAP4_VDDS_DV_C2C_MASK (1 << 25)
-#define OMAP4_VDDS_DV_CAM_SHIFT 24
-#define OMAP4_VDDS_DV_CAM_MASK (1 << 24)
-#define OMAP4_VDDS_DV_GPMC_SHIFT 23
-#define OMAP4_VDDS_DV_GPMC_MASK (1 << 23)
-#define OMAP4_VDDS_DV_SDMMC2_SHIFT 22
-#define OMAP4_VDDS_DV_SDMMC2_MASK (1 << 22)
-
-/* CONTROL_SMART1IO_PADCONF_0 */
-#define OMAP4_ABE_DR0_SC_SHIFT 30
-#define OMAP4_ABE_DR0_SC_MASK (0x3 << 30)
-#define OMAP4_CAM_DR0_SC_SHIFT 28
-#define OMAP4_CAM_DR0_SC_MASK (0x3 << 28)
-#define OMAP4_FREF_DR2_SC_SHIFT 26
-#define OMAP4_FREF_DR2_SC_MASK (0x3 << 26)
-#define OMAP4_FREF_DR3_SC_SHIFT 24
-#define OMAP4_FREF_DR3_SC_MASK (0x3 << 24)
-#define OMAP4_GPIO_DR8_SC_SHIFT 22
-#define OMAP4_GPIO_DR8_SC_MASK (0x3 << 22)
-#define OMAP4_GPIO_DR9_SC_SHIFT 20
-#define OMAP4_GPIO_DR9_SC_MASK (0x3 << 20)
-#define OMAP4_GPMC_DR2_SC_SHIFT 18
-#define OMAP4_GPMC_DR2_SC_MASK (0x3 << 18)
-#define OMAP4_GPMC_DR3_SC_SHIFT 16
-#define OMAP4_GPMC_DR3_SC_MASK (0x3 << 16)
-#define OMAP4_GPMC_DR6_SC_SHIFT 14
-#define OMAP4_GPMC_DR6_SC_MASK (0x3 << 14)
-#define OMAP4_HDMI_DR0_SC_SHIFT 12
-#define OMAP4_HDMI_DR0_SC_MASK (0x3 << 12)
-#define OMAP4_MCSPI1_DR0_SC_SHIFT 10
-#define OMAP4_MCSPI1_DR0_SC_MASK (0x3 << 10)
-#define OMAP4_UART1_DR0_SC_SHIFT 8
-#define OMAP4_UART1_DR0_SC_MASK (0x3 << 8)
-#define OMAP4_UART3_DR0_SC_SHIFT 6
-#define OMAP4_UART3_DR0_SC_MASK (0x3 << 6)
-#define OMAP4_UART3_DR1_SC_SHIFT 4
-#define OMAP4_UART3_DR1_SC_MASK (0x3 << 4)
-#define OMAP4_UNIPRO_DR0_SC_SHIFT 2
-#define OMAP4_UNIPRO_DR0_SC_MASK (0x3 << 2)
-#define OMAP4_UNIPRO_DR1_SC_SHIFT 0
-#define OMAP4_UNIPRO_DR1_SC_MASK (0x3 << 0)
-
-/* CONTROL_SMART1IO_PADCONF_1 */
-#define OMAP4_ABE_DR0_LB_SHIFT 30
-#define OMAP4_ABE_DR0_LB_MASK (0x3 << 30)
-#define OMAP4_CAM_DR0_LB_SHIFT 28
-#define OMAP4_CAM_DR0_LB_MASK (0x3 << 28)
-#define OMAP4_FREF_DR2_LB_SHIFT 26
-#define OMAP4_FREF_DR2_LB_MASK (0x3 << 26)
-#define OMAP4_FREF_DR3_LB_SHIFT 24
-#define OMAP4_FREF_DR3_LB_MASK (0x3 << 24)
-#define OMAP4_GPIO_DR8_LB_SHIFT 22
-#define OMAP4_GPIO_DR8_LB_MASK (0x3 << 22)
-#define OMAP4_GPIO_DR9_LB_SHIFT 20
-#define OMAP4_GPIO_DR9_LB_MASK (0x3 << 20)
-#define OMAP4_GPMC_DR2_LB_SHIFT 18
-#define OMAP4_GPMC_DR2_LB_MASK (0x3 << 18)
-#define OMAP4_GPMC_DR3_LB_SHIFT 16
-#define OMAP4_GPMC_DR3_LB_MASK (0x3 << 16)
-#define OMAP4_GPMC_DR6_LB_SHIFT 14
-#define OMAP4_GPMC_DR6_LB_MASK (0x3 << 14)
-#define OMAP4_HDMI_DR0_LB_SHIFT 12
-#define OMAP4_HDMI_DR0_LB_MASK (0x3 << 12)
-#define OMAP4_MCSPI1_DR0_LB_SHIFT 10
-#define OMAP4_MCSPI1_DR0_LB_MASK (0x3 << 10)
-#define OMAP4_UART1_DR0_LB_SHIFT 8
-#define OMAP4_UART1_DR0_LB_MASK (0x3 << 8)
-#define OMAP4_UART3_DR0_LB_SHIFT 6
-#define OMAP4_UART3_DR0_LB_MASK (0x3 << 6)
-#define OMAP4_UART3_DR1_LB_SHIFT 4
-#define OMAP4_UART3_DR1_LB_MASK (0x3 << 4)
-#define OMAP4_UNIPRO_DR0_LB_SHIFT 2
-#define OMAP4_UNIPRO_DR0_LB_MASK (0x3 << 2)
-#define OMAP4_UNIPRO_DR1_LB_SHIFT 0
-#define OMAP4_UNIPRO_DR1_LB_MASK (0x3 << 0)
-
-/* CONTROL_SMART2IO_PADCONF_0 */
-#define OMAP4_C2C_DR0_LB_SHIFT 31
-#define OMAP4_C2C_DR0_LB_MASK (1 << 31)
-#define OMAP4_DPM_DR1_LB_SHIFT 30
-#define OMAP4_DPM_DR1_LB_MASK (1 << 30)
-#define OMAP4_DPM_DR2_LB_SHIFT 29
-#define OMAP4_DPM_DR2_LB_MASK (1 << 29)
-#define OMAP4_DPM_DR3_LB_SHIFT 28
-#define OMAP4_DPM_DR3_LB_MASK (1 << 28)
-#define OMAP4_GPIO_DR0_LB_SHIFT 27
-#define OMAP4_GPIO_DR0_LB_MASK (1 << 27)
-#define OMAP4_GPIO_DR1_LB_SHIFT 26
-#define OMAP4_GPIO_DR1_LB_MASK (1 << 26)
-#define OMAP4_GPIO_DR10_LB_SHIFT 25
-#define OMAP4_GPIO_DR10_LB_MASK (1 << 25)
-#define OMAP4_GPIO_DR2_LB_SHIFT 24
-#define OMAP4_GPIO_DR2_LB_MASK (1 << 24)
-#define OMAP4_GPMC_DR0_LB_SHIFT 23
-#define OMAP4_GPMC_DR0_LB_MASK (1 << 23)
-#define OMAP4_GPMC_DR1_LB_SHIFT 22
-#define OMAP4_GPMC_DR1_LB_MASK (1 << 22)
-#define OMAP4_GPMC_DR4_LB_SHIFT 21
-#define OMAP4_GPMC_DR4_LB_MASK (1 << 21)
-#define OMAP4_GPMC_DR5_LB_SHIFT 20
-#define OMAP4_GPMC_DR5_LB_MASK (1 << 20)
-#define OMAP4_GPMC_DR7_LB_SHIFT 19
-#define OMAP4_GPMC_DR7_LB_MASK (1 << 19)
-#define OMAP4_HSI2_DR0_LB_SHIFT 18
-#define OMAP4_HSI2_DR0_LB_MASK (1 << 18)
-#define OMAP4_HSI2_DR1_LB_SHIFT 17
-#define OMAP4_HSI2_DR1_LB_MASK (1 << 17)
-#define OMAP4_HSI2_DR2_LB_SHIFT 16
-#define OMAP4_HSI2_DR2_LB_MASK (1 << 16)
-#define OMAP4_KPD_DR0_LB_SHIFT 15
-#define OMAP4_KPD_DR0_LB_MASK (1 << 15)
-#define OMAP4_KPD_DR1_LB_SHIFT 14
-#define OMAP4_KPD_DR1_LB_MASK (1 << 14)
-#define OMAP4_PDM_DR0_LB_SHIFT 13
-#define OMAP4_PDM_DR0_LB_MASK (1 << 13)
-#define OMAP4_SDMMC2_DR0_LB_SHIFT 12
-#define OMAP4_SDMMC2_DR0_LB_MASK (1 << 12)
-#define OMAP4_SDMMC3_DR0_LB_SHIFT 11
-#define OMAP4_SDMMC3_DR0_LB_MASK (1 << 11)
-#define OMAP4_SDMMC4_DR0_LB_SHIFT 10
-#define OMAP4_SDMMC4_DR0_LB_MASK (1 << 10)
-#define OMAP4_SDMMC4_DR1_LB_SHIFT 9
-#define OMAP4_SDMMC4_DR1_LB_MASK (1 << 9)
-#define OMAP4_SPI3_DR0_LB_SHIFT 8
-#define OMAP4_SPI3_DR0_LB_MASK (1 << 8)
-#define OMAP4_SPI3_DR1_LB_SHIFT 7
-#define OMAP4_SPI3_DR1_LB_MASK (1 << 7)
-#define OMAP4_UART3_DR2_LB_SHIFT 6
-#define OMAP4_UART3_DR2_LB_MASK (1 << 6)
-#define OMAP4_UART3_DR3_LB_SHIFT 5
-#define OMAP4_UART3_DR3_LB_MASK (1 << 5)
-#define OMAP4_UART3_DR4_LB_SHIFT 4
-#define OMAP4_UART3_DR4_LB_MASK (1 << 4)
-#define OMAP4_UART3_DR5_LB_SHIFT 3
-#define OMAP4_UART3_DR5_LB_MASK (1 << 3)
-#define OMAP4_USBA0_DR1_LB_SHIFT 2
-#define OMAP4_USBA0_DR1_LB_MASK (1 << 2)
-#define OMAP4_USBA_DR2_LB_SHIFT 1
-#define OMAP4_USBA_DR2_LB_MASK (1 << 1)
-
-/* CONTROL_SMART2IO_PADCONF_1 */
-#define OMAP4_USBB1_DR0_LB_SHIFT 31
-#define OMAP4_USBB1_DR0_LB_MASK (1 << 31)
-#define OMAP4_USBB2_DR0_LB_SHIFT 30
-#define OMAP4_USBB2_DR0_LB_MASK (1 << 30)
-#define OMAP4_USBA0_DR0_LB_SHIFT 29
-#define OMAP4_USBA0_DR0_LB_MASK (1 << 29)
-
-/* CONTROL_SMART3IO_PADCONF_0 */
-#define OMAP4_DMIC_DR0_MB_SHIFT 30
-#define OMAP4_DMIC_DR0_MB_MASK (0x3 << 30)
-#define OMAP4_GPIO_DR3_MB_SHIFT 28
-#define OMAP4_GPIO_DR3_MB_MASK (0x3 << 28)
-#define OMAP4_GPIO_DR4_MB_SHIFT 26
-#define OMAP4_GPIO_DR4_MB_MASK (0x3 << 26)
-#define OMAP4_GPIO_DR5_MB_SHIFT 24
-#define OMAP4_GPIO_DR5_MB_MASK (0x3 << 24)
-#define OMAP4_GPIO_DR6_MB_SHIFT 22
-#define OMAP4_GPIO_DR6_MB_MASK (0x3 << 22)
-#define OMAP4_HSI_DR1_MB_SHIFT 20
-#define OMAP4_HSI_DR1_MB_MASK (0x3 << 20)
-#define OMAP4_HSI_DR2_MB_SHIFT 18
-#define OMAP4_HSI_DR2_MB_MASK (0x3 << 18)
-#define OMAP4_HSI_DR3_MB_SHIFT 16
-#define OMAP4_HSI_DR3_MB_MASK (0x3 << 16)
-#define OMAP4_MCBSP2_DR0_MB_SHIFT 14
-#define OMAP4_MCBSP2_DR0_MB_MASK (0x3 << 14)
-#define OMAP4_MCSPI4_DR0_MB_SHIFT 12
-#define OMAP4_MCSPI4_DR0_MB_MASK (0x3 << 12)
-#define OMAP4_MCSPI4_DR1_MB_SHIFT 10
-#define OMAP4_MCSPI4_DR1_MB_MASK (0x3 << 10)
-#define OMAP4_SDMMC3_DR0_MB_SHIFT 8
-#define OMAP4_SDMMC3_DR0_MB_MASK (0x3 << 8)
-#define OMAP4_SPI2_DR0_MB_SHIFT 0
-#define OMAP4_SPI2_DR0_MB_MASK (0x3 << 0)
-
-/* CONTROL_SMART3IO_PADCONF_1 */
-#define OMAP4_SPI2_DR1_MB_SHIFT 30
-#define OMAP4_SPI2_DR1_MB_MASK (0x3 << 30)
-#define OMAP4_SPI2_DR2_MB_SHIFT 28
-#define OMAP4_SPI2_DR2_MB_MASK (0x3 << 28)
-#define OMAP4_UART2_DR0_MB_SHIFT 26
-#define OMAP4_UART2_DR0_MB_MASK (0x3 << 26)
-#define OMAP4_UART2_DR1_MB_SHIFT 24
-#define OMAP4_UART2_DR1_MB_MASK (0x3 << 24)
-#define OMAP4_UART4_DR0_MB_SHIFT 22
-#define OMAP4_UART4_DR0_MB_MASK (0x3 << 22)
-#define OMAP4_HSI_DR0_MB_SHIFT 20
-#define OMAP4_HSI_DR0_MB_MASK (0x3 << 20)
-
-/* CONTROL_SMART3IO_PADCONF_2 */
-#define OMAP4_DMIC_DR0_LB_SHIFT 31
-#define OMAP4_DMIC_DR0_LB_MASK (1 << 31)
-#define OMAP4_GPIO_DR3_LB_SHIFT 30
-#define OMAP4_GPIO_DR3_LB_MASK (1 << 30)
-#define OMAP4_GPIO_DR4_LB_SHIFT 29
-#define OMAP4_GPIO_DR4_LB_MASK (1 << 29)
-#define OMAP4_GPIO_DR5_LB_SHIFT 28
-#define OMAP4_GPIO_DR5_LB_MASK (1 << 28)
-#define OMAP4_GPIO_DR6_LB_SHIFT 27
-#define OMAP4_GPIO_DR6_LB_MASK (1 << 27)
-#define OMAP4_HSI_DR1_LB_SHIFT 26
-#define OMAP4_HSI_DR1_LB_MASK (1 << 26)
-#define OMAP4_HSI_DR2_LB_SHIFT 25
-#define OMAP4_HSI_DR2_LB_MASK (1 << 25)
-#define OMAP4_HSI_DR3_LB_SHIFT 24
-#define OMAP4_HSI_DR3_LB_MASK (1 << 24)
-#define OMAP4_MCBSP2_DR0_LB_SHIFT 23
-#define OMAP4_MCBSP2_DR0_LB_MASK (1 << 23)
-#define OMAP4_MCSPI4_DR0_LB_SHIFT 22
-#define OMAP4_MCSPI4_DR0_LB_MASK (1 << 22)
-#define OMAP4_MCSPI4_DR1_LB_SHIFT 21
-#define OMAP4_MCSPI4_DR1_LB_MASK (1 << 21)
-#define OMAP4_SLIMBUS2_DR0_LB_SHIFT 18
-#define OMAP4_SLIMBUS2_DR0_LB_MASK (1 << 18)
-#define OMAP4_SPI2_DR0_LB_SHIFT 16
-#define OMAP4_SPI2_DR0_LB_MASK (1 << 16)
-#define OMAP4_SPI2_DR1_LB_SHIFT 15
-#define OMAP4_SPI2_DR1_LB_MASK (1 << 15)
-#define OMAP4_SPI2_DR2_LB_SHIFT 14
-#define OMAP4_SPI2_DR2_LB_MASK (1 << 14)
-#define OMAP4_UART2_DR0_LB_SHIFT 13
-#define OMAP4_UART2_DR0_LB_MASK (1 << 13)
-#define OMAP4_UART2_DR1_LB_SHIFT 12
-#define OMAP4_UART2_DR1_LB_MASK (1 << 12)
-#define OMAP4_UART4_DR0_LB_SHIFT 11
-#define OMAP4_UART4_DR0_LB_MASK (1 << 11)
-#define OMAP4_HSI_DR0_LB_SHIFT 10
-#define OMAP4_HSI_DR0_LB_MASK (1 << 10)
-
-/* CONTROL_USBB_HSIC */
-#define OMAP4_USBB2_DR1_SR_SHIFT 30
-#define OMAP4_USBB2_DR1_SR_MASK (0x3 << 30)
-#define OMAP4_USBB2_DR1_I_SHIFT 27
-#define OMAP4_USBB2_DR1_I_MASK (0x7 << 27)
-#define OMAP4_USBB1_DR1_SR_SHIFT 25
-#define OMAP4_USBB1_DR1_SR_MASK (0x3 << 25)
-#define OMAP4_USBB1_DR1_I_SHIFT 22
-#define OMAP4_USBB1_DR1_I_MASK (0x7 << 22)
-#define OMAP4_USBB1_HSIC_DATA_WD_SHIFT 20
-#define OMAP4_USBB1_HSIC_DATA_WD_MASK (0x3 << 20)
-#define OMAP4_USBB1_HSIC_STROBE_WD_SHIFT 18
-#define OMAP4_USBB1_HSIC_STROBE_WD_MASK (0x3 << 18)
-#define OMAP4_USBB2_HSIC_DATA_WD_SHIFT 16
-#define OMAP4_USBB2_HSIC_DATA_WD_MASK (0x3 << 16)
-#define OMAP4_USBB2_HSIC_STROBE_WD_SHIFT 14
-#define OMAP4_USBB2_HSIC_STROBE_WD_MASK (0x3 << 14)
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT 13
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_MASK (1 << 13)
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_SHIFT 11
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_MASK (0x3 << 11)
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT 10
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK (1 << 10)
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_SHIFT 8
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_MASK (0x3 << 8)
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT 7
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_MASK (1 << 7)
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_SHIFT 5
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_MASK (0x3 << 5)
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT 4
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK (1 << 4)
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_SHIFT 2
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_MASK (0x3 << 2)
-
-/* CONTROL_SLIMBUS */
-#define OMAP4_SLIMBUS1_DR0_MB_SHIFT 30
-#define OMAP4_SLIMBUS1_DR0_MB_MASK (0x3 << 30)
-#define OMAP4_SLIMBUS1_DR1_MB_SHIFT 28
-#define OMAP4_SLIMBUS1_DR1_MB_MASK (0x3 << 28)
-#define OMAP4_SLIMBUS2_DR0_MB_SHIFT 26
-#define OMAP4_SLIMBUS2_DR0_MB_MASK (0x3 << 26)
-#define OMAP4_SLIMBUS2_DR1_MB_SHIFT 24
-#define OMAP4_SLIMBUS2_DR1_MB_MASK (0x3 << 24)
-#define OMAP4_SLIMBUS2_DR2_MB_SHIFT 22
-#define OMAP4_SLIMBUS2_DR2_MB_MASK (0x3 << 22)
-#define OMAP4_SLIMBUS2_DR3_MB_SHIFT 20
-#define OMAP4_SLIMBUS2_DR3_MB_MASK (0x3 << 20)
-#define OMAP4_SLIMBUS1_DR0_LB_SHIFT 19
-#define OMAP4_SLIMBUS1_DR0_LB_MASK (1 << 19)
-#define OMAP4_SLIMBUS2_DR1_LB_SHIFT 18
-#define OMAP4_SLIMBUS2_DR1_LB_MASK (1 << 18)
-
-/* CONTROL_PBIASLITE */
-#define OMAP4_USIM_PBIASLITE_HIZ_MODE_SHIFT 31
-#define OMAP4_USIM_PBIASLITE_HIZ_MODE_MASK (1 << 31)
-#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_SHIFT 30
-#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_MASK (1 << 30)
-#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_SHIFT 29
-#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_MASK (1 << 29)
-#define OMAP4_USIM_PBIASLITE_PWRDNZ_SHIFT 28
-#define OMAP4_USIM_PBIASLITE_PWRDNZ_MASK (1 << 28)
-#define OMAP4_USIM_PBIASLITE_VMODE_SHIFT 27
-#define OMAP4_USIM_PBIASLITE_VMODE_MASK (1 << 27)
-#define OMAP4_MMC1_PWRDNZ_SHIFT 26
-#define OMAP4_MMC1_PWRDNZ_MASK (1 << 26)
-#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_SHIFT 25
-#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_MASK (1 << 25)
-#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_SHIFT 24
-#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_MASK (1 << 24)
-#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_SHIFT 23
-#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK (1 << 23)
-#define OMAP4_MMC1_PBIASLITE_PWRDNZ_SHIFT 22
-#define OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK (1 << 22)
-#define OMAP4_MMC1_PBIASLITE_VMODE_SHIFT 21
-#define OMAP4_MMC1_PBIASLITE_VMODE_MASK (1 << 21)
-#define OMAP4_USBC1_ICUSB_PWRDNZ_SHIFT 20
-#define OMAP4_USBC1_ICUSB_PWRDNZ_MASK (1 << 20)
-
-/* CONTROL_I2C_0 */
-#define OMAP4_I2C4_SDA_GLFENB_SHIFT 31
-#define OMAP4_I2C4_SDA_GLFENB_MASK (1 << 31)
-#define OMAP4_I2C4_SDA_LOAD_BITS_SHIFT 29
-#define OMAP4_I2C4_SDA_LOAD_BITS_MASK (0x3 << 29)
-#define OMAP4_I2C4_SDA_PULLUPRESX_SHIFT 28
-#define OMAP4_I2C4_SDA_PULLUPRESX_MASK (1 << 28)
-#define OMAP4_I2C3_SDA_GLFENB_SHIFT 27
-#define OMAP4_I2C3_SDA_GLFENB_MASK (1 << 27)
-#define OMAP4_I2C3_SDA_LOAD_BITS_SHIFT 25
-#define OMAP4_I2C3_SDA_LOAD_BITS_MASK (0x3 << 25)
-#define OMAP4_I2C3_SDA_PULLUPRESX_SHIFT 24
-#define OMAP4_I2C3_SDA_PULLUPRESX_MASK (1 << 24)
-#define OMAP4_I2C2_SDA_GLFENB_SHIFT 23
-#define OMAP4_I2C2_SDA_GLFENB_MASK (1 << 23)
-#define OMAP4_I2C2_SDA_LOAD_BITS_SHIFT 21
-#define OMAP4_I2C2_SDA_LOAD_BITS_MASK (0x3 << 21)
-#define OMAP4_I2C2_SDA_PULLUPRESX_SHIFT 20
-#define OMAP4_I2C2_SDA_PULLUPRESX_MASK (1 << 20)
-#define OMAP4_I2C1_SDA_GLFENB_SHIFT 19
-#define OMAP4_I2C1_SDA_GLFENB_MASK (1 << 19)
-#define OMAP4_I2C1_SDA_LOAD_BITS_SHIFT 17
-#define OMAP4_I2C1_SDA_LOAD_BITS_MASK (0x3 << 17)
-#define OMAP4_I2C1_SDA_PULLUPRESX_SHIFT 16
-#define OMAP4_I2C1_SDA_PULLUPRESX_MASK (1 << 16)
-#define OMAP4_I2C4_SCL_GLFENB_SHIFT 15
-#define OMAP4_I2C4_SCL_GLFENB_MASK (1 << 15)
-#define OMAP4_I2C4_SCL_LOAD_BITS_SHIFT 13
-#define OMAP4_I2C4_SCL_LOAD_BITS_MASK (0x3 << 13)
-#define OMAP4_I2C4_SCL_PULLUPRESX_SHIFT 12
-#define OMAP4_I2C4_SCL_PULLUPRESX_MASK (1 << 12)
-#define OMAP4_I2C3_SCL_GLFENB_SHIFT 11
-#define OMAP4_I2C3_SCL_GLFENB_MASK (1 << 11)
-#define OMAP4_I2C3_SCL_LOAD_BITS_SHIFT 9
-#define OMAP4_I2C3_SCL_LOAD_BITS_MASK (0x3 << 9)
-#define OMAP4_I2C3_SCL_PULLUPRESX_SHIFT 8
-#define OMAP4_I2C3_SCL_PULLUPRESX_MASK (1 << 8)
-#define OMAP4_I2C2_SCL_GLFENB_SHIFT 7
-#define OMAP4_I2C2_SCL_GLFENB_MASK (1 << 7)
-#define OMAP4_I2C2_SCL_LOAD_BITS_SHIFT 5
-#define OMAP4_I2C2_SCL_LOAD_BITS_MASK (0x3 << 5)
-#define OMAP4_I2C2_SCL_PULLUPRESX_SHIFT 4
-#define OMAP4_I2C2_SCL_PULLUPRESX_MASK (1 << 4)
-#define OMAP4_I2C1_SCL_GLFENB_SHIFT 3
-#define OMAP4_I2C1_SCL_GLFENB_MASK (1 << 3)
-#define OMAP4_I2C1_SCL_LOAD_BITS_SHIFT 1
-#define OMAP4_I2C1_SCL_LOAD_BITS_MASK (0x3 << 1)
-#define OMAP4_I2C1_SCL_PULLUPRESX_SHIFT 0
-#define OMAP4_I2C1_SCL_PULLUPRESX_MASK (1 << 0)
-
-/* CONTROL_CAMERA_RX */
-#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_SHIFT 31
-#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_MASK (1 << 31)
-#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT 29
-#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK (0x3 << 29)
-#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT 24
-#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK (0x1f << 24)
-#define OMAP4_CAMERARX_UNIPRO_CAMMODE_SHIFT 22
-#define OMAP4_CAMERARX_UNIPRO_CAMMODE_MASK (0x3 << 22)
-#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT 21
-#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK (1 << 21)
-#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT 19
-#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK (0x3 << 19)
-#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT 18
-#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK (1 << 18)
-#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT 16
-#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK (0x3 << 16)
-
-/* CONTROL_AVDAC */
-#define OMAP4_AVDAC_ACEN_SHIFT 31
-#define OMAP4_AVDAC_ACEN_MASK (1 << 31)
-#define OMAP4_AVDAC_TVOUTBYPASS_SHIFT 30
-#define OMAP4_AVDAC_TVOUTBYPASS_MASK (1 << 30)
-#define OMAP4_AVDAC_INPUTINV_SHIFT 29
-#define OMAP4_AVDAC_INPUTINV_MASK (1 << 29)
-#define OMAP4_AVDAC_CTL_SHIFT 13
-#define OMAP4_AVDAC_CTL_MASK (0xffff << 13)
-#define OMAP4_AVDAC_CTL_WR_ACK_SHIFT 12
-#define OMAP4_AVDAC_CTL_WR_ACK_MASK (1 << 12)
-
-/* CONTROL_HDMI_TX_PHY */
-#define OMAP4_HDMITXPHY_PADORDER_SHIFT 31
-#define OMAP4_HDMITXPHY_PADORDER_MASK (1 << 31)
-#define OMAP4_HDMITXPHY_TXVALID_SHIFT 30
-#define OMAP4_HDMITXPHY_TXVALID_MASK (1 << 30)
-#define OMAP4_HDMITXPHY_ENBYPASSCLK_SHIFT 29
-#define OMAP4_HDMITXPHY_ENBYPASSCLK_MASK (1 << 29)
-#define OMAP4_HDMITXPHY_PD_PULLUPDET_SHIFT 28
-#define OMAP4_HDMITXPHY_PD_PULLUPDET_MASK (1 << 28)
-
-/* CONTROL_MMC2 */
-#define OMAP4_MMC2_FEEDBACK_CLK_SEL_SHIFT 31
-#define OMAP4_MMC2_FEEDBACK_CLK_SEL_MASK (1 << 31)
-
-/* CONTROL_DSIPHY */
-#define OMAP4_DSI2_LANEENABLE_SHIFT 29
-#define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29)
-#define OMAP4_DSI1_LANEENABLE_SHIFT 24
-#define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24)
-#define OMAP4_DSI1_PIPD_SHIFT 19
-#define OMAP4_DSI1_PIPD_MASK (0x1f << 19)
-#define OMAP4_DSI2_PIPD_SHIFT 14
-#define OMAP4_DSI2_PIPD_MASK (0x1f << 14)
-
-/* CONTROL_MCBSPLP */
-#define OMAP4_ALBCTRLRX_FSX_SHIFT 31
-#define OMAP4_ALBCTRLRX_FSX_MASK (1 << 31)
-#define OMAP4_ALBCTRLRX_CLKX_SHIFT 30
-#define OMAP4_ALBCTRLRX_CLKX_MASK (1 << 30)
-#define OMAP4_ABE_MCBSP1_DR_EN_SHIFT 29
-#define OMAP4_ABE_MCBSP1_DR_EN_MASK (1 << 29)
-
-/* CONTROL_USB2PHYCORE */
-#define OMAP4_USB2PHY_AUTORESUME_EN_SHIFT 31
-#define OMAP4_USB2PHY_AUTORESUME_EN_MASK (1 << 31)
-#define OMAP4_USB2PHY_DISCHGDET_SHIFT 30
-#define OMAP4_USB2PHY_DISCHGDET_MASK (1 << 30)
-#define OMAP4_USB2PHY_GPIOMODE_SHIFT 29
-#define OMAP4_USB2PHY_GPIOMODE_MASK (1 << 29)
-#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_SHIFT 28
-#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_MASK (1 << 28)
-#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_SHIFT 27
-#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_MASK (1 << 27)
-#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_SHIFT 26
-#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_MASK (1 << 26)
-#define OMAP4_USB2PHY_CHG_VSRC_EN_SHIFT 25
-#define OMAP4_USB2PHY_CHG_VSRC_EN_MASK (1 << 25)
-#define OMAP4_USB2PHY_CHG_ISINK_EN_SHIFT 24
-#define OMAP4_USB2PHY_CHG_ISINK_EN_MASK (1 << 24)
-#define OMAP4_USB2PHY_CHG_DET_STATUS_SHIFT 21
-#define OMAP4_USB2PHY_CHG_DET_STATUS_MASK (0x7 << 21)
-#define OMAP4_USB2PHY_CHG_DET_DM_COMP_SHIFT 20
-#define OMAP4_USB2PHY_CHG_DET_DM_COMP_MASK (1 << 20)
-#define OMAP4_USB2PHY_CHG_DET_DP_COMP_SHIFT 19
-#define OMAP4_USB2PHY_CHG_DET_DP_COMP_MASK (1 << 19)
-#define OMAP4_USB2PHY_DATADET_SHIFT 18
-#define OMAP4_USB2PHY_DATADET_MASK (1 << 18)
-#define OMAP4_USB2PHY_SINKONDP_SHIFT 17
-#define OMAP4_USB2PHY_SINKONDP_MASK (1 << 17)
-#define OMAP4_USB2PHY_SRCONDM_SHIFT 16
-#define OMAP4_USB2PHY_SRCONDM_MASK (1 << 16)
-#define OMAP4_USB2PHY_RESTARTCHGDET_SHIFT 15
-#define OMAP4_USB2PHY_RESTARTCHGDET_MASK (1 << 15)
-#define OMAP4_USB2PHY_CHGDETDONE_SHIFT 14
-#define OMAP4_USB2PHY_CHGDETDONE_MASK (1 << 14)
-#define OMAP4_USB2PHY_CHGDETECTED_SHIFT 13
-#define OMAP4_USB2PHY_CHGDETECTED_MASK (1 << 13)
-#define OMAP4_USB2PHY_MCPCPUEN_SHIFT 12
-#define OMAP4_USB2PHY_MCPCPUEN_MASK (1 << 12)
-#define OMAP4_USB2PHY_MCPCMODEEN_SHIFT 11
-#define OMAP4_USB2PHY_MCPCMODEEN_MASK (1 << 11)
-#define OMAP4_USB2PHY_RESETDONEMCLK_SHIFT 10
-#define OMAP4_USB2PHY_RESETDONEMCLK_MASK (1 << 10)
-#define OMAP4_USB2PHY_UTMIRESETDONE_SHIFT 9
-#define OMAP4_USB2PHY_UTMIRESETDONE_MASK (1 << 9)
-#define OMAP4_USB2PHY_TXBITSTUFFENABLE_SHIFT 8
-#define OMAP4_USB2PHY_TXBITSTUFFENABLE_MASK (1 << 8)
-#define OMAP4_USB2PHY_DATAPOLARITYN_SHIFT 7
-#define OMAP4_USB2PHY_DATAPOLARITYN_MASK (1 << 7)
-#define OMAP4_USBDPLL_FREQLOCK_SHIFT 6
-#define OMAP4_USBDPLL_FREQLOCK_MASK (1 << 6)
-#define OMAP4_USB2PHY_RESETDONETCLK_SHIFT 5
-#define OMAP4_USB2PHY_RESETDONETCLK_MASK (1 << 5)
-
-/* CONTROL_I2C_1 */
-#define OMAP4_HDMI_DDC_SDA_GLFENB_SHIFT 31
-#define OMAP4_HDMI_DDC_SDA_GLFENB_MASK (1 << 31)
-#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_SHIFT 29
-#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_MASK (0x3 << 29)
-#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_SHIFT 28
-#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK (1 << 28)
-#define OMAP4_HDMI_DDC_SCL_GLFENB_SHIFT 27
-#define OMAP4_HDMI_DDC_SCL_GLFENB_MASK (1 << 27)
-#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_SHIFT 25
-#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_MASK (0x3 << 25)
-#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_SHIFT 24
-#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK (1 << 24)
-#define OMAP4_HDMI_DDC_SDA_HSMODE_SHIFT 23
-#define OMAP4_HDMI_DDC_SDA_HSMODE_MASK (1 << 23)
-#define OMAP4_HDMI_DDC_SDA_NMODE_SHIFT 22
-#define OMAP4_HDMI_DDC_SDA_NMODE_MASK (1 << 22)
-#define OMAP4_HDMI_DDC_SCL_HSMODE_SHIFT 21
-#define OMAP4_HDMI_DDC_SCL_HSMODE_MASK (1 << 21)
-#define OMAP4_HDMI_DDC_SCL_NMODE_SHIFT 20
-#define OMAP4_HDMI_DDC_SCL_NMODE_MASK (1 << 20)
-
-/* CONTROL_MMC1 */
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_SHIFT 31
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK (1 << 31)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_SHIFT 30
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK (1 << 30)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_SHIFT 29
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK (1 << 29)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_SHIFT 28
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK (1 << 28)
-#define OMAP4_SDMMC1_DR0_SPEEDCTRL_SHIFT 27
-#define OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK (1 << 27)
-#define OMAP4_SDMMC1_DR1_SPEEDCTRL_SHIFT 26
-#define OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK (1 << 26)
-#define OMAP4_SDMMC1_DR2_SPEEDCTRL_SHIFT 25
-#define OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK (1 << 25)
-#define OMAP4_USBC1_DR0_SPEEDCTRL_SHIFT 24
-#define OMAP4_USBC1_DR0_SPEEDCTRL_MASK (1 << 24)
-#define OMAP4_USB_FD_CDEN_SHIFT 23
-#define OMAP4_USB_FD_CDEN_MASK (1 << 23)
-#define OMAP4_USBC1_ICUSB_DP_PDDIS_SHIFT 22
-#define OMAP4_USBC1_ICUSB_DP_PDDIS_MASK (1 << 22)
-#define OMAP4_USBC1_ICUSB_DM_PDDIS_SHIFT 21
-#define OMAP4_USBC1_ICUSB_DM_PDDIS_MASK (1 << 21)
-
-/* CONTROL_HSI */
-#define OMAP4_HSI1_CALLOOP_SEL_SHIFT 31
-#define OMAP4_HSI1_CALLOOP_SEL_MASK (1 << 31)
-#define OMAP4_HSI1_CALMUX_SEL_SHIFT 30
-#define OMAP4_HSI1_CALMUX_SEL_MASK (1 << 30)
-#define OMAP4_HSI2_CALLOOP_SEL_SHIFT 29
-#define OMAP4_HSI2_CALLOOP_SEL_MASK (1 << 29)
-#define OMAP4_HSI2_CALMUX_SEL_SHIFT 28
-#define OMAP4_HSI2_CALMUX_SEL_MASK (1 << 28)
-
-/* CONTROL_USB */
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_SHIFT 31
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_MASK (1 << 31)
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_SHIFT 30
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_MASK (1 << 30)
-
-/* CONTROL_HDQ */
-#define OMAP4_HDQ_SIO_PWRDNZ_SHIFT 31
-#define OMAP4_HDQ_SIO_PWRDNZ_MASK (1 << 31)
-
-/* CONTROL_LPDDR2IO1_0 */
-#define OMAP4_LPDDR2IO1_GR4_SR_SHIFT 30
-#define OMAP4_LPDDR2IO1_GR4_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR4_I_SHIFT 27
-#define OMAP4_LPDDR2IO1_GR4_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR4_WD_SHIFT 25
-#define OMAP4_LPDDR2IO1_GR4_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR3_SR_SHIFT 22
-#define OMAP4_LPDDR2IO1_GR3_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR3_I_SHIFT 19
-#define OMAP4_LPDDR2IO1_GR3_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR3_WD_SHIFT 17
-#define OMAP4_LPDDR2IO1_GR3_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR2_SR_SHIFT 14
-#define OMAP4_LPDDR2IO1_GR2_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR2_I_SHIFT 11
-#define OMAP4_LPDDR2IO1_GR2_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR2_WD_SHIFT 9
-#define OMAP4_LPDDR2IO1_GR2_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO1_GR1_SR_SHIFT 6
-#define OMAP4_LPDDR2IO1_GR1_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO1_GR1_I_SHIFT 3
-#define OMAP4_LPDDR2IO1_GR1_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO1_GR1_WD_SHIFT 1
-#define OMAP4_LPDDR2IO1_GR1_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO1_1 */
-#define OMAP4_LPDDR2IO1_GR8_SR_SHIFT 30
-#define OMAP4_LPDDR2IO1_GR8_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR8_I_SHIFT 27
-#define OMAP4_LPDDR2IO1_GR8_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR8_WD_SHIFT 25
-#define OMAP4_LPDDR2IO1_GR8_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR7_SR_SHIFT 22
-#define OMAP4_LPDDR2IO1_GR7_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR7_I_SHIFT 19
-#define OMAP4_LPDDR2IO1_GR7_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR7_WD_SHIFT 17
-#define OMAP4_LPDDR2IO1_GR7_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR6_SR_SHIFT 14
-#define OMAP4_LPDDR2IO1_GR6_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR6_I_SHIFT 11
-#define OMAP4_LPDDR2IO1_GR6_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR6_WD_SHIFT 9
-#define OMAP4_LPDDR2IO1_GR6_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO1_GR5_SR_SHIFT 6
-#define OMAP4_LPDDR2IO1_GR5_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO1_GR5_I_SHIFT 3
-#define OMAP4_LPDDR2IO1_GR5_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO1_GR5_WD_SHIFT 1
-#define OMAP4_LPDDR2IO1_GR5_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO1_2 */
-#define OMAP4_LPDDR2IO1_GR11_SR_SHIFT 30
-#define OMAP4_LPDDR2IO1_GR11_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR11_I_SHIFT 27
-#define OMAP4_LPDDR2IO1_GR11_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR11_WD_SHIFT 25
-#define OMAP4_LPDDR2IO1_GR11_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR10_SR_SHIFT 22
-#define OMAP4_LPDDR2IO1_GR10_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR10_I_SHIFT 19
-#define OMAP4_LPDDR2IO1_GR10_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR10_WD_SHIFT 17
-#define OMAP4_LPDDR2IO1_GR10_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR9_SR_SHIFT 14
-#define OMAP4_LPDDR2IO1_GR9_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR9_I_SHIFT 11
-#define OMAP4_LPDDR2IO1_GR9_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR9_WD_SHIFT 9
-#define OMAP4_LPDDR2IO1_GR9_WD_MASK (0x3 << 9)
-
-/* CONTROL_LPDDR2IO1_3 */
-#define OMAP4_LPDDR21_VREF_CA_CCAP0_SHIFT 31
-#define OMAP4_LPDDR21_VREF_CA_CCAP0_MASK (1 << 31)
-#define OMAP4_LPDDR21_VREF_CA_CCAP1_SHIFT 30
-#define OMAP4_LPDDR21_VREF_CA_CCAP1_MASK (1 << 30)
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_SHIFT 29
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_MASK (1 << 29)
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_SHIFT 28
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_MASK (1 << 28)
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_SHIFT 27
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_MASK (1 << 27)
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_SHIFT 26
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_MASK (1 << 26)
-#define OMAP4_LPDDR21_VREF_CA_TAP0_SHIFT 25
-#define OMAP4_LPDDR21_VREF_CA_TAP0_MASK (1 << 25)
-#define OMAP4_LPDDR21_VREF_CA_TAP1_SHIFT 24
-#define OMAP4_LPDDR21_VREF_CA_TAP1_MASK (1 << 24)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_SHIFT 23
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_MASK (1 << 23)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_SHIFT 22
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_MASK (1 << 22)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_SHIFT 21
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_MASK (1 << 21)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_SHIFT 20
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_MASK (1 << 20)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_SHIFT 19
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_MASK (1 << 19)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_SHIFT 18
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_MASK (1 << 18)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_SHIFT 17
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_MASK (1 << 17)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_SHIFT 16
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_MASK (1 << 16)
-#define OMAP4_LPDDR21_VREF_DQ_CCAP0_SHIFT 15
-#define OMAP4_LPDDR21_VREF_DQ_CCAP0_MASK (1 << 15)
-#define OMAP4_LPDDR21_VREF_DQ_CCAP1_SHIFT 14
-#define OMAP4_LPDDR21_VREF_DQ_CCAP1_MASK (1 << 14)
-#define OMAP4_LPDDR21_VREF_DQ_TAP0_SHIFT 13
-#define OMAP4_LPDDR21_VREF_DQ_TAP0_MASK (1 << 13)
-#define OMAP4_LPDDR21_VREF_DQ_TAP1_SHIFT 12
-#define OMAP4_LPDDR21_VREF_DQ_TAP1_MASK (1 << 12)
-
-/* CONTROL_LPDDR2IO2_0 */
-#define OMAP4_LPDDR2IO2_GR4_SR_SHIFT 30
-#define OMAP4_LPDDR2IO2_GR4_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR4_I_SHIFT 27
-#define OMAP4_LPDDR2IO2_GR4_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR4_WD_SHIFT 25
-#define OMAP4_LPDDR2IO2_GR4_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR3_SR_SHIFT 22
-#define OMAP4_LPDDR2IO2_GR3_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR3_I_SHIFT 19
-#define OMAP4_LPDDR2IO2_GR3_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR3_WD_SHIFT 17
-#define OMAP4_LPDDR2IO2_GR3_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR2_SR_SHIFT 14
-#define OMAP4_LPDDR2IO2_GR2_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR2_I_SHIFT 11
-#define OMAP4_LPDDR2IO2_GR2_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR2_WD_SHIFT 9
-#define OMAP4_LPDDR2IO2_GR2_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO2_GR1_SR_SHIFT 6
-#define OMAP4_LPDDR2IO2_GR1_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO2_GR1_I_SHIFT 3
-#define OMAP4_LPDDR2IO2_GR1_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO2_GR1_WD_SHIFT 1
-#define OMAP4_LPDDR2IO2_GR1_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO2_1 */
-#define OMAP4_LPDDR2IO2_GR8_SR_SHIFT 30
-#define OMAP4_LPDDR2IO2_GR8_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR8_I_SHIFT 27
-#define OMAP4_LPDDR2IO2_GR8_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR8_WD_SHIFT 25
-#define OMAP4_LPDDR2IO2_GR8_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR7_SR_SHIFT 22
-#define OMAP4_LPDDR2IO2_GR7_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR7_I_SHIFT 19
-#define OMAP4_LPDDR2IO2_GR7_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR7_WD_SHIFT 17
-#define OMAP4_LPDDR2IO2_GR7_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR6_SR_SHIFT 14
-#define OMAP4_LPDDR2IO2_GR6_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR6_I_SHIFT 11
-#define OMAP4_LPDDR2IO2_GR6_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR6_WD_SHIFT 9
-#define OMAP4_LPDDR2IO2_GR6_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO2_GR5_SR_SHIFT 6
-#define OMAP4_LPDDR2IO2_GR5_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO2_GR5_I_SHIFT 3
-#define OMAP4_LPDDR2IO2_GR5_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO2_GR5_WD_SHIFT 1
-#define OMAP4_LPDDR2IO2_GR5_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO2_2 */
-#define OMAP4_LPDDR2IO2_GR11_SR_SHIFT 30
-#define OMAP4_LPDDR2IO2_GR11_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR11_I_SHIFT 27
-#define OMAP4_LPDDR2IO2_GR11_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR11_WD_SHIFT 25
-#define OMAP4_LPDDR2IO2_GR11_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR10_SR_SHIFT 22
-#define OMAP4_LPDDR2IO2_GR10_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR10_I_SHIFT 19
-#define OMAP4_LPDDR2IO2_GR10_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR10_WD_SHIFT 17
-#define OMAP4_LPDDR2IO2_GR10_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR9_SR_SHIFT 14
-#define OMAP4_LPDDR2IO2_GR9_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR9_I_SHIFT 11
-#define OMAP4_LPDDR2IO2_GR9_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR9_WD_SHIFT 9
-#define OMAP4_LPDDR2IO2_GR9_WD_MASK (0x3 << 9)
-
-/* CONTROL_LPDDR2IO2_3 */
-#define OMAP4_LPDDR22_VREF_CA_CCAP0_SHIFT 31
-#define OMAP4_LPDDR22_VREF_CA_CCAP0_MASK (1 << 31)
-#define OMAP4_LPDDR22_VREF_CA_CCAP1_SHIFT 30
-#define OMAP4_LPDDR22_VREF_CA_CCAP1_MASK (1 << 30)
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_SHIFT 29
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_MASK (1 << 29)
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_SHIFT 28
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_MASK (1 << 28)
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_SHIFT 27
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_MASK (1 << 27)
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_SHIFT 26
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_MASK (1 << 26)
-#define OMAP4_LPDDR22_VREF_CA_TAP0_SHIFT 25
-#define OMAP4_LPDDR22_VREF_CA_TAP0_MASK (1 << 25)
-#define OMAP4_LPDDR22_VREF_CA_TAP1_SHIFT 24
-#define OMAP4_LPDDR22_VREF_CA_TAP1_MASK (1 << 24)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_SHIFT 23
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_MASK (1 << 23)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_SHIFT 22
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_MASK (1 << 22)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_SHIFT 21
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_MASK (1 << 21)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_SHIFT 20
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_MASK (1 << 20)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_SHIFT 19
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_MASK (1 << 19)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_SHIFT 18
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_MASK (1 << 18)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_SHIFT 17
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_MASK (1 << 17)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_SHIFT 16
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_MASK (1 << 16)
-#define OMAP4_LPDDR22_VREF_DQ_CCAP0_SHIFT 15
-#define OMAP4_LPDDR22_VREF_DQ_CCAP0_MASK (1 << 15)
-#define OMAP4_LPDDR22_VREF_DQ_CCAP1_SHIFT 14
-#define OMAP4_LPDDR22_VREF_DQ_CCAP1_MASK (1 << 14)
-#define OMAP4_LPDDR22_VREF_DQ_TAP0_SHIFT 13
-#define OMAP4_LPDDR22_VREF_DQ_TAP0_MASK (1 << 13)
-#define OMAP4_LPDDR22_VREF_DQ_TAP1_SHIFT 12
-#define OMAP4_LPDDR22_VREF_DQ_TAP1_MASK (1 << 12)
-
-/* CONTROL_BUS_HOLD */
-#define OMAP4_ABE_DMIC_DIN3_EN_SHIFT 31
-#define OMAP4_ABE_DMIC_DIN3_EN_MASK (1 << 31)
-#define OMAP4_MCSPI1_CS3_EN_SHIFT 30
-#define OMAP4_MCSPI1_CS3_EN_MASK (1 << 30)
-
-/* CONTROL_C2C */
-#define OMAP4_MIRROR_MODE_EN_SHIFT 31
-#define OMAP4_MIRROR_MODE_EN_MASK (1 << 31)
-#define OMAP4_C2C_SPARE_SHIFT 24
-#define OMAP4_C2C_SPARE_MASK (0x7f << 24)
-
-/* CORE_CONTROL_SPARE_RW */
-#define OMAP4_CORE_CONTROL_SPARE_RW_SHIFT 0
-#define OMAP4_CORE_CONTROL_SPARE_RW_MASK (0xffffffff << 0)
-
-/* CORE_CONTROL_SPARE_R */
-#define OMAP4_CORE_CONTROL_SPARE_R_SHIFT 0
-#define OMAP4_CORE_CONTROL_SPARE_R_MASK (0xffffffff << 0)
-
-/* CORE_CONTROL_SPARE_R_C0 */
-#define OMAP4_CORE_CONTROL_SPARE_R_C0_SHIFT 31
-#define OMAP4_CORE_CONTROL_SPARE_R_C0_MASK (1 << 31)
-#define OMAP4_CORE_CONTROL_SPARE_R_C1_SHIFT 30
-#define OMAP4_CORE_CONTROL_SPARE_R_C1_MASK (1 << 30)
-#define OMAP4_CORE_CONTROL_SPARE_R_C2_SHIFT 29
-#define OMAP4_CORE_CONTROL_SPARE_R_C2_MASK (1 << 29)
-#define OMAP4_CORE_CONTROL_SPARE_R_C3_SHIFT 28
-#define OMAP4_CORE_CONTROL_SPARE_R_C3_MASK (1 << 28)
-#define OMAP4_CORE_CONTROL_SPARE_R_C4_SHIFT 27
-#define OMAP4_CORE_CONTROL_SPARE_R_C4_MASK (1 << 27)
-#define OMAP4_CORE_CONTROL_SPARE_R_C5_SHIFT 26
-#define OMAP4_CORE_CONTROL_SPARE_R_C5_MASK (1 << 26)
-#define OMAP4_CORE_CONTROL_SPARE_R_C6_SHIFT 25
-#define OMAP4_CORE_CONTROL_SPARE_R_C6_MASK (1 << 25)
-#define OMAP4_CORE_CONTROL_SPARE_R_C7_SHIFT 24
-#define OMAP4_CORE_CONTROL_SPARE_R_C7_MASK (1 << 24)
-
-/* CONTROL_EFUSE_1 */
-#define OMAP4_AVDAC_TRIM_BYTE3_SHIFT 24
-#define OMAP4_AVDAC_TRIM_BYTE3_MASK (0x7f << 24)
-#define OMAP4_AVDAC_TRIM_BYTE2_SHIFT 16
-#define OMAP4_AVDAC_TRIM_BYTE2_MASK (0xff << 16)
-#define OMAP4_AVDAC_TRIM_BYTE1_SHIFT 8
-#define OMAP4_AVDAC_TRIM_BYTE1_MASK (0xff << 8)
-#define OMAP4_AVDAC_TRIM_BYTE0_SHIFT 0
-#define OMAP4_AVDAC_TRIM_BYTE0_MASK (0xff << 0)
-
-/* CONTROL_EFUSE_2 */
-#define OMAP4_EFUSE_SMART2TEST_P0_SHIFT 31
-#define OMAP4_EFUSE_SMART2TEST_P0_MASK (1 << 31)
-#define OMAP4_EFUSE_SMART2TEST_P1_SHIFT 30
-#define OMAP4_EFUSE_SMART2TEST_P1_MASK (1 << 30)
-#define OMAP4_EFUSE_SMART2TEST_P2_SHIFT 29
-#define OMAP4_EFUSE_SMART2TEST_P2_MASK (1 << 29)
-#define OMAP4_EFUSE_SMART2TEST_P3_SHIFT 28
-#define OMAP4_EFUSE_SMART2TEST_P3_MASK (1 << 28)
-#define OMAP4_EFUSE_SMART2TEST_N0_SHIFT 27
-#define OMAP4_EFUSE_SMART2TEST_N0_MASK (1 << 27)
-#define OMAP4_EFUSE_SMART2TEST_N1_SHIFT 26
-#define OMAP4_EFUSE_SMART2TEST_N1_MASK (1 << 26)
-#define OMAP4_EFUSE_SMART2TEST_N2_SHIFT 25
-#define OMAP4_EFUSE_SMART2TEST_N2_MASK (1 << 25)
-#define OMAP4_EFUSE_SMART2TEST_N3_SHIFT 24
-#define OMAP4_EFUSE_SMART2TEST_N3_MASK (1 << 24)
-#define OMAP4_LPDDR2_PTV_N1_SHIFT 23
-#define OMAP4_LPDDR2_PTV_N1_MASK (1 << 23)
-#define OMAP4_LPDDR2_PTV_N2_SHIFT 22
-#define OMAP4_LPDDR2_PTV_N2_MASK (1 << 22)
-#define OMAP4_LPDDR2_PTV_N3_SHIFT 21
-#define OMAP4_LPDDR2_PTV_N3_MASK (1 << 21)
-#define OMAP4_LPDDR2_PTV_N4_SHIFT 20
-#define OMAP4_LPDDR2_PTV_N4_MASK (1 << 20)
-#define OMAP4_LPDDR2_PTV_N5_SHIFT 19
-#define OMAP4_LPDDR2_PTV_N5_MASK (1 << 19)
-#define OMAP4_LPDDR2_PTV_P1_SHIFT 18
-#define OMAP4_LPDDR2_PTV_P1_MASK (1 << 18)
-#define OMAP4_LPDDR2_PTV_P2_SHIFT 17
-#define OMAP4_LPDDR2_PTV_P2_MASK (1 << 17)
-#define OMAP4_LPDDR2_PTV_P3_SHIFT 16
-#define OMAP4_LPDDR2_PTV_P3_MASK (1 << 16)
-#define OMAP4_LPDDR2_PTV_P4_SHIFT 15
-#define OMAP4_LPDDR2_PTV_P4_MASK (1 << 15)
-#define OMAP4_LPDDR2_PTV_P5_SHIFT 14
-#define OMAP4_LPDDR2_PTV_P5_MASK (1 << 14)
-
-/* CONTROL_EFUSE_3 */
-#define OMAP4_STD_FUSE_SPARE_1_SHIFT 24
-#define OMAP4_STD_FUSE_SPARE_1_MASK (0xff << 24)
-#define OMAP4_STD_FUSE_SPARE_2_SHIFT 16
-#define OMAP4_STD_FUSE_SPARE_2_MASK (0xff << 16)
-#define OMAP4_STD_FUSE_SPARE_3_SHIFT 8
-#define OMAP4_STD_FUSE_SPARE_3_MASK (0xff << 8)
-#define OMAP4_STD_FUSE_SPARE_4_SHIFT 0
-#define OMAP4_STD_FUSE_SPARE_4_MASK (0xff << 0)
-
-/* CONTROL_EFUSE_4 */
-#define OMAP4_STD_FUSE_SPARE_5_SHIFT 24
-#define OMAP4_STD_FUSE_SPARE_5_MASK (0xff << 24)
-#define OMAP4_STD_FUSE_SPARE_6_SHIFT 16
-#define OMAP4_STD_FUSE_SPARE_6_MASK (0xff << 16)
-#define OMAP4_STD_FUSE_SPARE_7_SHIFT 8
-#define OMAP4_STD_FUSE_SPARE_7_MASK (0xff << 8)
-#define OMAP4_STD_FUSE_SPARE_8_SHIFT 0
-#define OMAP4_STD_FUSE_SPARE_8_MASK (0xff << 0)
-
-#endif
diff --git a/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h
deleted file mode 100644
index 17c9b37..0000000
--- a/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_PAD_WKUP registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_PAD_WKUP 0x4a31e000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_PAD_WKUP_PADCONF_WAKEUPEVENT_0 0x007c
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_0 0x05a0
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_1 0x05a4
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_PADCONF_MODE 0x05a8
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_XTAL_OSCILLATOR 0x05ac
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_USIMIO 0x0600
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2 0x0604
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_JTAG 0x0608
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SYS 0x060c
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_RW 0x0614
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R 0x0618
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R_C0 0x061c
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* PADCONF_WAKEUPEVENT_0 */
-#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* CONTROL_SMART1NOPMIO_PADCONF_0 */
-#define OMAP4_FREF_DR0_SC_SHIFT 30
-#define OMAP4_FREF_DR0_SC_MASK (0x3 << 30)
-#define OMAP4_FREF_DR1_SC_SHIFT 28
-#define OMAP4_FREF_DR1_SC_MASK (0x3 << 28)
-#define OMAP4_FREF_DR4_SC_SHIFT 26
-#define OMAP4_FREF_DR4_SC_MASK (0x3 << 26)
-#define OMAP4_FREF_DR5_SC_SHIFT 24
-#define OMAP4_FREF_DR5_SC_MASK (0x3 << 24)
-#define OMAP4_FREF_DR6_SC_SHIFT 22
-#define OMAP4_FREF_DR6_SC_MASK (0x3 << 22)
-#define OMAP4_FREF_DR7_SC_SHIFT 20
-#define OMAP4_FREF_DR7_SC_MASK (0x3 << 20)
-#define OMAP4_GPIO_DR7_SC_SHIFT 18
-#define OMAP4_GPIO_DR7_SC_MASK (0x3 << 18)
-#define OMAP4_DPM_DR0_SC_SHIFT 14
-#define OMAP4_DPM_DR0_SC_MASK (0x3 << 14)
-#define OMAP4_SIM_DR0_SC_SHIFT 12
-#define OMAP4_SIM_DR0_SC_MASK (0x3 << 12)
-
-/* CONTROL_SMART1NOPMIO_PADCONF_1 */
-#define OMAP4_FREF_DR0_LB_SHIFT 30
-#define OMAP4_FREF_DR0_LB_MASK (0x3 << 30)
-#define OMAP4_FREF_DR1_LB_SHIFT 28
-#define OMAP4_FREF_DR1_LB_MASK (0x3 << 28)
-#define OMAP4_FREF_DR4_LB_SHIFT 26
-#define OMAP4_FREF_DR4_LB_MASK (0x3 << 26)
-#define OMAP4_FREF_DR5_LB_SHIFT 24
-#define OMAP4_FREF_DR5_LB_MASK (0x3 << 24)
-#define OMAP4_FREF_DR6_LB_SHIFT 22
-#define OMAP4_FREF_DR6_LB_MASK (0x3 << 22)
-#define OMAP4_FREF_DR7_LB_SHIFT 20
-#define OMAP4_FREF_DR7_LB_MASK (0x3 << 20)
-#define OMAP4_GPIO_DR7_LB_SHIFT 18
-#define OMAP4_GPIO_DR7_LB_MASK (0x3 << 18)
-#define OMAP4_DPM_DR0_LB_SHIFT 14
-#define OMAP4_DPM_DR0_LB_MASK (0x3 << 14)
-#define OMAP4_SIM_DR0_LB_SHIFT 12
-#define OMAP4_SIM_DR0_LB_MASK (0x3 << 12)
-
-/* CONTROL_PADCONF_MODE */
-#define OMAP4_VDDS_DV_FREF_SHIFT 31
-#define OMAP4_VDDS_DV_FREF_MASK (1 << 31)
-#define OMAP4_VDDS_DV_BANK2_SHIFT 30
-#define OMAP4_VDDS_DV_BANK2_MASK (1 << 30)
-
-/* CONTROL_XTAL_OSCILLATOR */
-#define OMAP4_OSCILLATOR_BOOST_SHIFT 31
-#define OMAP4_OSCILLATOR_BOOST_MASK (1 << 31)
-#define OMAP4_OSCILLATOR_OS_OUT_SHIFT 30
-#define OMAP4_OSCILLATOR_OS_OUT_MASK (1 << 30)
-
-/* CONTROL_USIMIO */
-#define OMAP4_PAD_USIM_CLK_LOW_SHIFT 31
-#define OMAP4_PAD_USIM_CLK_LOW_MASK (1 << 31)
-#define OMAP4_PAD_USIM_RST_LOW_SHIFT 29
-#define OMAP4_PAD_USIM_RST_LOW_MASK (1 << 29)
-#define OMAP4_USIM_PWRDNZ_SHIFT 28
-#define OMAP4_USIM_PWRDNZ_MASK (1 << 28)
-
-/* CONTROL_I2C_2 */
-#define OMAP4_SR_SDA_GLFENB_SHIFT 31
-#define OMAP4_SR_SDA_GLFENB_MASK (1 << 31)
-#define OMAP4_SR_SDA_LOAD_BITS_SHIFT 29
-#define OMAP4_SR_SDA_LOAD_BITS_MASK (0x3 << 29)
-#define OMAP4_SR_SDA_PULLUPRESX_SHIFT 28
-#define OMAP4_SR_SDA_PULLUPRESX_MASK (1 << 28)
-#define OMAP4_SR_SCL_GLFENB_SHIFT 27
-#define OMAP4_SR_SCL_GLFENB_MASK (1 << 27)
-#define OMAP4_SR_SCL_LOAD_BITS_SHIFT 25
-#define OMAP4_SR_SCL_LOAD_BITS_MASK (0x3 << 25)
-#define OMAP4_SR_SCL_PULLUPRESX_SHIFT 24
-#define OMAP4_SR_SCL_PULLUPRESX_MASK (1 << 24)
-
-/* CONTROL_JTAG */
-#define OMAP4_JTAG_NTRST_EN_SHIFT 31
-#define OMAP4_JTAG_NTRST_EN_MASK (1 << 31)
-#define OMAP4_JTAG_TCK_EN_SHIFT 30
-#define OMAP4_JTAG_TCK_EN_MASK (1 << 30)
-#define OMAP4_JTAG_RTCK_EN_SHIFT 29
-#define OMAP4_JTAG_RTCK_EN_MASK (1 << 29)
-#define OMAP4_JTAG_TDI_EN_SHIFT 28
-#define OMAP4_JTAG_TDI_EN_MASK (1 << 28)
-#define OMAP4_JTAG_TDO_EN_SHIFT 27
-#define OMAP4_JTAG_TDO_EN_MASK (1 << 27)
-
-/* CONTROL_SYS */
-#define OMAP4_SYS_NRESWARM_PIPU_SHIFT 31
-#define OMAP4_SYS_NRESWARM_PIPU_MASK (1 << 31)
-
-/* WKUP_CONTROL_SPARE_RW */
-#define OMAP4_WKUP_CONTROL_SPARE_RW_SHIFT 0
-#define OMAP4_WKUP_CONTROL_SPARE_RW_MASK (0xffffffff << 0)
-
-/* WKUP_CONTROL_SPARE_R */
-#define OMAP4_WKUP_CONTROL_SPARE_R_SHIFT 0
-#define OMAP4_WKUP_CONTROL_SPARE_R_MASK (0xffffffff << 0)
-
-/* WKUP_CONTROL_SPARE_R_C0 */
-#define OMAP4_WKUP_CONTROL_SPARE_R_C0_SHIFT 31
-#define OMAP4_WKUP_CONTROL_SPARE_R_C0_MASK (1 << 31)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C1_SHIFT 30
-#define OMAP4_WKUP_CONTROL_SPARE_R_C1_MASK (1 << 30)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C2_SHIFT 29
-#define OMAP4_WKUP_CONTROL_SPARE_R_C2_MASK (1 << 29)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C3_SHIFT 28
-#define OMAP4_WKUP_CONTROL_SPARE_R_C3_MASK (1 << 28)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C4_SHIFT 27
-#define OMAP4_WKUP_CONTROL_SPARE_R_C4_MASK (1 << 27)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C5_SHIFT 26
-#define OMAP4_WKUP_CONTROL_SPARE_R_C5_MASK (1 << 26)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C6_SHIFT 25
-#define OMAP4_WKUP_CONTROL_SPARE_R_C6_MASK (1 << 25)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C7_SHIFT 24
-#define OMAP4_WKUP_CONTROL_SPARE_R_C7_MASK (1 << 24)
-
-#endif
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index b6f8f34..324f02b 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -432,9 +432,9 @@
*/
omap_init_audio();
omap_init_camera();
- omap_init_mbox();
/* If dtb is there, the devices will be created dynamically */
if (!of_have_populated_dt()) {
+ omap_init_mbox();
omap_init_mcspi();
omap_init_sham();
omap_init_aes();
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index a6d2cf1..e1a56d8 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -259,6 +259,9 @@
if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
d->dev_caps |= HS_CHANNELS_RESERVED;
+ if (platform_get_irq_byname(pdev, "0") < 0)
+ d->dev_caps |= DMA_ENGINE_HANDLE_IRQ;
+
/* Check the capabilities register for descriptor loading feature */
if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS)
dma_common_ch_end = CCDN;
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 6d7ba37..cd5f3a0 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -28,11 +28,8 @@
#include <linux/bitops.h>
#include <linux/clkdev.h>
-#include "soc.h"
#include "clockdomain.h"
#include "clock.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
#define DPLL_AUTOIDLE_DISABLE 0x0
@@ -310,7 +307,7 @@
* Set jitter correction. Jitter correction applicable for OMAP343X
* only since freqsel field is no longer present on other devices.
*/
- if (cpu_is_omap343x()) {
+ if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
v = omap2_clk_readl(clk, dd->control_reg);
v &= ~dd->freqsel_mask;
v |= freqsel << __ffs(dd->freqsel_mask);
@@ -512,7 +509,7 @@
return -EINVAL;
/* Freqsel is available only on OMAP343X devices */
- if (cpu_is_omap343x()) {
+ if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
freqsel = _omap3_dpll_compute_freqsel(clk,
dd->last_rounded_n);
WARN_ON(!freqsel);
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index 52f9438..4613f1e 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -15,10 +15,7 @@
#include <linux/io.h>
#include <linux/bitops.h>
-#include "soc.h"
#include "clock.h"
-#include "clock44xx.h"
-#include "cm-regbits-44xx.h"
/*
* Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
@@ -29,13 +26,23 @@
#define OMAP4_DPLL_LP_FINT_MAX 1000000
#define OMAP4_DPLL_LP_FOUT_MAX 100000000
+/*
+ * Bitfield declarations
+ */
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8)
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK (1 << 10)
+#define OMAP4430_DPLL_REGM4XEN_MASK (1 << 11)
+
+/* Static rate multiplier for OMAP4 REGM4XEN clocks */
+#define OMAP4430_REGM4XEN_MULT 4
+
/* Supported only on OMAP4 */
int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk)
{
u32 v;
u32 mask;
- if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
+ if (!clk || !clk->clksel_reg)
return -EINVAL;
mask = clk->flags & CLOCK_CLKOUTX2 ?
@@ -54,7 +61,7 @@
u32 v;
u32 mask;
- if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
+ if (!clk || !clk->clksel_reg)
return;
mask = clk->flags & CLOCK_CLKOUTX2 ?
@@ -72,7 +79,7 @@
u32 v;
u32 mask;
- if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
+ if (!clk || !clk->clksel_reg)
return;
mask = clk->flags & CLOCK_CLKOUTX2 ?
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 8f55945..1fae5c1 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -728,6 +728,8 @@
if (!omap_clk_soc_init)
return 0;
+ ti_clk_init_features();
+
ret = of_prcm_init();
if (!ret)
ret = omap_clk_soc_init();
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 2f15979..65b1647 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -16,7 +16,6 @@
#include <linux/i2c-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/omap-dma.h>
-#include <linux/platform_data/mailbox-omap.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
@@ -163,18 +162,6 @@
};
/* mailbox */
-static struct omap_mbox_dev_info omap2420_mailbox_info[] = {
- { .name = "dsp", .tx_id = 0, .rx_id = 1, .irq_id = 0, .usr_id = 0 },
- { .name = "iva", .tx_id = 2, .rx_id = 3, .irq_id = 1, .usr_id = 3 },
-};
-
-static struct omap_mbox_pdata omap2420_mailbox_attrs = {
- .num_users = 4,
- .num_fifos = 6,
- .info_cnt = ARRAY_SIZE(omap2420_mailbox_info),
- .info = omap2420_mailbox_info,
-};
-
static struct omap_hwmod omap2420_mailbox_hwmod = {
.name = "mailbox",
.class = &omap2xxx_mailbox_hwmod_class,
@@ -188,7 +175,6 @@
.idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
},
},
- .dev_attr = &omap2420_mailbox_attrs,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 6d1b609..c2555cb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -17,7 +17,6 @@
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/omap-dma.h>
-#include <linux/platform_data/mailbox-omap.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
@@ -161,17 +160,6 @@
};
/* mailbox */
-static struct omap_mbox_dev_info omap2430_mailbox_info[] = {
- { .name = "dsp", .tx_id = 0, .rx_id = 1 },
-};
-
-static struct omap_mbox_pdata omap2430_mailbox_attrs = {
- .num_users = 4,
- .num_fifos = 6,
- .info_cnt = ARRAY_SIZE(omap2430_mailbox_info),
- .info = omap2430_mailbox_info,
-};
-
static struct omap_hwmod omap2430_mailbox_hwmod = {
.name = "mailbox",
.class = &omap2xxx_mailbox_hwmod_class,
@@ -185,7 +173,6 @@
.idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
},
},
- .dev_attr = &omap2430_mailbox_attrs,
};
/* mcspi3 */
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
index 0413dab..c1e98d5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
@@ -152,15 +152,6 @@
{ }
};
-struct omap_hwmod_addr_space omap2_mailbox_addrs[] = {
- {
- .pa_start = 0x48094000,
- .pa_end = 0x48094000 + SZ_512 - 1,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
-
struct omap_hwmod_addr_space omap2_mcbsp1_addrs[] = {
{
.name = "mpu",
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index 5da7a42..c6c6384 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -37,46 +37,6 @@
};
/*
- * 'dss' class
- * display sub-system
- */
-
-static struct omap_hwmod_class_sysconfig omap2_dss_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
- SYSS_HAS_RESET_STATUS),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2_dss_hwmod_class = {
- .name = "dss",
- .sysc = &omap2_dss_sysc,
- .reset = omap_dss_reset,
-};
-
-/*
- * 'rfbi' class
- * remote frame buffer interface
- */
-
-static struct omap_hwmod_class_sysconfig omap2_rfbi_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2_rfbi_hwmod_class = {
- .name = "rfbi",
- .sysc = &omap2_rfbi_sysc,
-};
-
-/*
* 'venc' class
* video encoder
*/
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
index e2db378..8f5989d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -317,21 +317,11 @@
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_addr_space am33xx_mailbox_addrs[] = {
- {
- .pa_start = 0x480C8000,
- .pa_end = 0x480C8000 + (SZ_4K - 1),
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
/* l4 ls -> mailbox */
struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_mailbox_hwmod,
.clk = "l4ls_gclk",
- .addr = am33xx_mailbox_addrs,
.user = OCP_USER_MPU,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index 5c2cc80..fea01aa 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -19,6 +19,8 @@
#include "omap_hwmod.h"
#include "omap_hwmod_33xx_43xx_common_data.h"
#include "prcm43xx.h"
+#include "omap_hwmod_common_data.h"
+
/* IP blocks */
static struct omap_hwmod am43xx_l4_hs_hwmod = {
@@ -415,6 +417,72 @@
},
};
+/* dss */
+
+static struct omap_hwmod am43xx_dss_core_hwmod = {
+ .name = "dss_core",
+ .class = &omap2_dss_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* dispc */
+
+struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
+ .manager_count = 1,
+ .has_framedonetv_irq = 0
+};
+
+static struct omap_hwmod_class_sysconfig am43xx_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_MIDLEMODE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am43xx_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &am43xx_dispc_sysc,
+};
+
+static struct omap_hwmod am43xx_dss_dispc_hwmod = {
+ .name = "dss_dispc",
+ .class = &am43xx_dispc_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ },
+ },
+ .dev_attr = &am43xx_dss_dispc_dev_attr,
+};
+
+/* rfbi */
+
+static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
+ .name = "dss_rfbi",
+ .class = &omap2_rfbi_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ },
+ },
+};
+
/* Interfaces */
static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
.master = &am33xx_l3_main_hwmod,
@@ -654,6 +722,34 @@
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
+ .master = &am43xx_dss_core_hwmod,
+ .slave = &am33xx_l3_main_hwmod,
+ .clk = "l3_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_core_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_dispc = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_dispc_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_rfbi_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__synctimer,
&am43xx_l4_ls__timer8,
@@ -748,6 +844,10 @@
&am43xx_l4_ls__ocp2scp1,
&am43xx_l3_s__usbotgss0,
&am43xx_l3_s__usbotgss1,
+ &am43xx_dss__l3_main,
+ &am43xx_l4_ls__dss,
+ &am43xx_l4_ls__dss_dispc,
+ &am43xx_l4_ls__dss_rfbi,
NULL,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 41e54f7..5e61b8c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -4142,21 +4142,11 @@
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap44xx_mailbox_addrs[] = {
- {
- .pa_start = 0x4a0f4000,
- .pa_end = 0x4a0f41ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
/* l4_cfg -> mailbox */
static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mailbox = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_mailbox_hwmod,
.clk = "l4_div_ck",
- .addr = omap44xx_mailbox_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 284324f..2757abf 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -273,6 +273,56 @@
};
/*
+ * 'gmac' class
+ * cpsw/gmac sub system
+ */
+static struct omap_hwmod_class_sysconfig dra7xx_gmac_sysc = {
+ .rev_offs = 0x0,
+ .sysc_offs = 0x8,
+ .syss_offs = 0x4,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
+ MSTANDBY_NO),
+ .sysc_fields = &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class dra7xx_gmac_hwmod_class = {
+ .name = "gmac",
+ .sysc = &dra7xx_gmac_sysc,
+};
+
+static struct omap_hwmod dra7xx_gmac_hwmod = {
+ .name = "gmac",
+ .class = &dra7xx_gmac_hwmod_class,
+ .clkdm_name = "gmac_clkdm",
+ .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
+ .main_clk = "dpll_gmac_ck",
+ .mpu_rt_idx = 1,
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_GMAC_GMAC_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_GMAC_GMAC_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'mdio' class
+ */
+static struct omap_hwmod_class dra7xx_mdio_hwmod_class = {
+ .name = "davinci_mdio",
+};
+
+static struct omap_hwmod dra7xx_mdio_hwmod = {
+ .name = "davinci_mdio",
+ .class = &dra7xx_mdio_hwmod_class,
+ .clkdm_name = "gmac_clkdm",
+ .main_clk = "dpll_gmac_ck",
+};
+
+/*
* 'dcan' class
*
*/
@@ -343,19 +393,10 @@
};
/* dma_system */
-static struct omap_hwmod_irq_info dra7xx_dma_system_irqs[] = {
- { .name = "0", .irq = 12 + DRA7XX_IRQ_GIC_START },
- { .name = "1", .irq = 13 + DRA7XX_IRQ_GIC_START },
- { .name = "2", .irq = 14 + DRA7XX_IRQ_GIC_START },
- { .name = "3", .irq = 15 + DRA7XX_IRQ_GIC_START },
- { .irq = -1 }
-};
-
static struct omap_hwmod dra7xx_dma_system_hwmod = {
.name = "dma_system",
.class = &dra7xx_dma_hwmod_class,
.clkdm_name = "dma_clkdm",
- .mpu_irqs = dra7xx_dma_system_irqs,
.main_clk = "l3_iclk_div",
.prcm = {
.omap4 = {
@@ -939,6 +980,194 @@
};
/*
+ * 'mailbox' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_mailbox_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_mailbox_hwmod_class = {
+ .name = "mailbox",
+ .sysc = &dra7xx_mailbox_sysc,
+};
+
+/* mailbox1 */
+static struct omap_hwmod dra7xx_mailbox1_hwmod = {
+ .name = "mailbox1",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX1_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX1_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox2 */
+static struct omap_hwmod dra7xx_mailbox2_hwmod = {
+ .name = "mailbox2",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX2_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX2_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox3 */
+static struct omap_hwmod dra7xx_mailbox3_hwmod = {
+ .name = "mailbox3",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX3_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX3_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox4 */
+static struct omap_hwmod dra7xx_mailbox4_hwmod = {
+ .name = "mailbox4",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX4_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX4_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox5 */
+static struct omap_hwmod dra7xx_mailbox5_hwmod = {
+ .name = "mailbox5",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX5_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX5_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox6 */
+static struct omap_hwmod dra7xx_mailbox6_hwmod = {
+ .name = "mailbox6",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX6_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX6_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox7 */
+static struct omap_hwmod dra7xx_mailbox7_hwmod = {
+ .name = "mailbox7",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX7_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX7_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox8 */
+static struct omap_hwmod dra7xx_mailbox8_hwmod = {
+ .name = "mailbox8",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX8_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX8_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox9 */
+static struct omap_hwmod dra7xx_mailbox9_hwmod = {
+ .name = "mailbox9",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX9_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX9_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox10 */
+static struct omap_hwmod dra7xx_mailbox10_hwmod = {
+ .name = "mailbox10",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX10_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX10_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox11 */
+static struct omap_hwmod dra7xx_mailbox11_hwmod = {
+ .name = "mailbox11",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX11_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX11_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox12 */
+static struct omap_hwmod dra7xx_mailbox12_hwmod = {
+ .name = "mailbox12",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX12_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX12_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/* mailbox13 */
+static struct omap_hwmod dra7xx_mailbox13_hwmod = {
+ .name = "mailbox13",
+ .class = &dra7xx_mailbox_hwmod_class,
+ .clkdm_name = "l4cfg_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX13_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4CFG_MAILBOX13_CONTEXT_OFFSET,
+ },
+ },
+};
+
+/*
* 'mcspi' class
*
*/
@@ -1215,6 +1444,97 @@
},
};
+/* ocp2scp3 */
+static struct omap_hwmod dra7xx_ocp2scp3_hwmod = {
+ .name = "ocp2scp3",
+ .class = &dra7xx_ocp2scp_hwmod_class,
+ .clkdm_name = "l3init_clkdm",
+ .main_clk = "l4_root_clk_div",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
+ },
+ },
+};
+
+/*
+ * 'PCIE' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_pcie_hwmod_class = {
+ .name = "pcie",
+};
+
+/* pcie1 */
+static struct omap_hwmod dra7xx_pcie1_hwmod = {
+ .name = "pcie1",
+ .class = &dra7xx_pcie_hwmod_class,
+ .clkdm_name = "pcie_clkdm",
+ .main_clk = "l4_root_clk_div",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* pcie2 */
+static struct omap_hwmod dra7xx_pcie2_hwmod = {
+ .name = "pcie2",
+ .class = &dra7xx_pcie_hwmod_class,
+ .clkdm_name = "pcie_clkdm",
+ .main_clk = "l4_root_clk_div",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
+ * 'PCIE PHY' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_pcie_phy_hwmod_class = {
+ .name = "pcie-phy",
+};
+
+/* pcie1 phy */
+static struct omap_hwmod dra7xx_pcie1_phy_hwmod = {
+ .name = "pcie1-phy",
+ .class = &dra7xx_pcie_phy_hwmod_class,
+ .clkdm_name = "l3init_clkdm",
+ .main_clk = "l4_root_clk_div",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* pcie2 phy */
+static struct omap_hwmod dra7xx_pcie2_phy_hwmod = {
+ .name = "pcie2-phy",
+ .class = &dra7xx_pcie_phy_hwmod_class,
+ .clkdm_name = "l3init_clkdm",
+ .main_clk = "l4_root_clk_div",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
/*
* 'qspi' class
*
@@ -1249,6 +1569,38 @@
};
/*
+ * 'rtcss' class
+ *
+ */
+static struct omap_hwmod_class_sysconfig dra7xx_rtcss_sysc = {
+ .sysc_offs = 0x0078,
+ .sysc_flags = SYSC_HAS_SIDLEMODE,
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class dra7xx_rtcss_hwmod_class = {
+ .name = "rtcss",
+ .sysc = &dra7xx_rtcss_sysc,
+};
+
+/* rtcss */
+static struct omap_hwmod dra7xx_rtcss_hwmod = {
+ .name = "rtcss",
+ .class = &dra7xx_rtcss_hwmod_class,
+ .clkdm_name = "rtc_clkdm",
+ .main_clk = "sys_32k_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_RTC_RTCSS_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_RTC_RTCSS_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
* 'sata' class
*
*/
@@ -2007,6 +2359,19 @@
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__cpgmac0 = {
+ .master = &dra7xx_l4_per2_hwmod,
+ .slave = &dra7xx_gmac_hwmod,
+ .clk = "dpll_gmac_ck",
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if dra7xx_gmac__mdio = {
+ .master = &dra7xx_gmac_hwmod,
+ .slave = &dra7xx_mdio_hwmod,
+ .user = OCP_USER_MPU,
+};
+
/* l4_wkup -> dcan1 */
static struct omap_hwmod_ocp_if dra7xx_l4_wkup__dcan1 = {
.master = &dra7xx_l4_wkup_hwmod,
@@ -2254,6 +2619,110 @@
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* l4_cfg -> mailbox1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mailbox1 = {
+ .master = &dra7xx_l4_cfg_hwmod,
+ .slave = &dra7xx_mailbox1_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox2 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox2_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox3 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox3_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox4 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox4_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox5 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox5 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox5_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox6 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox6 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox6_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox7 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox7 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox7_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox8 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox8 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox8_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox9 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox9 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox9_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox10 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox10 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox10_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox11 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox11 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox11_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox12 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox12 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox12_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> mailbox13 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox13 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_mailbox13_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* l4_per1 -> mcspi1 */
static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi1 = {
.master = &dra7xx_l4_per1_hwmod,
@@ -2334,6 +2803,62 @@
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* l4_cfg -> ocp2scp3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp3 = {
+ .master = &dra7xx_l4_cfg_hwmod,
+ .slave = &dra7xx_ocp2scp3_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> pcie1 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie1 = {
+ .master = &dra7xx_l3_main_1_hwmod,
+ .slave = &dra7xx_pcie1_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> pcie1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1 = {
+ .master = &dra7xx_l4_cfg_hwmod,
+ .slave = &dra7xx_pcie1_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> pcie2 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie2 = {
+ .master = &dra7xx_l3_main_1_hwmod,
+ .slave = &dra7xx_pcie2_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> pcie2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2 = {
+ .master = &dra7xx_l4_cfg_hwmod,
+ .slave = &dra7xx_pcie2_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> pcie1 phy */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1_phy = {
+ .master = &dra7xx_l4_cfg_hwmod,
+ .slave = &dra7xx_pcie1_phy_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> pcie2 phy */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2_phy = {
+ .master = &dra7xx_l4_cfg_hwmod,
+ .slave = &dra7xx_pcie2_phy_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_addr_space dra7xx_qspi_addrs[] = {
{
.pa_start = 0x4b300000,
@@ -2352,6 +2877,14 @@
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* l4_per3 -> rtcss */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__rtcss = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_rtcss_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_addr_space dra7xx_sata_addrs[] = {
{
.name = "sysc",
@@ -2650,6 +3183,8 @@
&dra7xx_l4_wkup__ctrl_module_wkup,
&dra7xx_l4_wkup__dcan1,
&dra7xx_l4_per2__dcan2,
+ &dra7xx_l4_per2__cpgmac0,
+ &dra7xx_gmac__mdio,
&dra7xx_l4_cfg__dma_system,
&dra7xx_l3_main_1__dss,
&dra7xx_l3_main_1__dispc,
@@ -2670,6 +3205,19 @@
&dra7xx_l4_per1__i2c3,
&dra7xx_l4_per1__i2c4,
&dra7xx_l4_per1__i2c5,
+ &dra7xx_l4_cfg__mailbox1,
+ &dra7xx_l4_per3__mailbox2,
+ &dra7xx_l4_per3__mailbox3,
+ &dra7xx_l4_per3__mailbox4,
+ &dra7xx_l4_per3__mailbox5,
+ &dra7xx_l4_per3__mailbox6,
+ &dra7xx_l4_per3__mailbox7,
+ &dra7xx_l4_per3__mailbox8,
+ &dra7xx_l4_per3__mailbox9,
+ &dra7xx_l4_per3__mailbox10,
+ &dra7xx_l4_per3__mailbox11,
+ &dra7xx_l4_per3__mailbox12,
+ &dra7xx_l4_per3__mailbox13,
&dra7xx_l4_per1__mcspi1,
&dra7xx_l4_per1__mcspi2,
&dra7xx_l4_per1__mcspi3,
@@ -2680,7 +3228,15 @@
&dra7xx_l4_per1__mmc4,
&dra7xx_l4_cfg__mpu,
&dra7xx_l4_cfg__ocp2scp1,
+ &dra7xx_l4_cfg__ocp2scp3,
+ &dra7xx_l3_main_1__pcie1,
+ &dra7xx_l4_cfg__pcie1,
+ &dra7xx_l3_main_1__pcie2,
+ &dra7xx_l4_cfg__pcie2,
+ &dra7xx_l4_cfg__pcie1_phy,
+ &dra7xx_l4_cfg__pcie2_phy,
&dra7xx_l3_main_1__qspi,
+ &dra7xx_l4_per3__rtcss,
&dra7xx_l4_cfg__sata,
&dra7xx_l4_cfg__smartreflex_core,
&dra7xx_l4_cfg__smartreflex_mpu,
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 2c38c6b..11ed5a1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -33,7 +33,6 @@
extern struct omap_hwmod_addr_space omap2_mcspi2_addr_space[];
extern struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[];
extern struct omap_hwmod_addr_space omap2_dma_system_addrs[];
-extern struct omap_hwmod_addr_space omap2_mailbox_addrs[];
extern struct omap_hwmod_addr_space omap2_mcbsp1_addrs[];
extern struct omap_hwmod_addr_space omap2_hdq1w_addr_space[];
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_common_ipblock_data.c
new file mode 100644
index 0000000..f21664d
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_common_ipblock_data.c
@@ -0,0 +1,55 @@
+/*
+ * omap_hwmod_common_ipblock_data.c - common IP block data for OMAP2+
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap_hwmod.h"
+#include "omap_hwmod_common_data.h"
+
+/*
+ * 'dss' class
+ * display sub-system
+ */
+
+static struct omap_hwmod_class_sysconfig omap2_dss_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+ SYSS_HAS_RESET_STATUS),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class omap2_dss_hwmod_class = {
+ .name = "dss",
+ .sysc = &omap2_dss_sysc,
+ .reset = omap_dss_reset,
+};
+
+/*
+ * 'rfbi' class
+ * remote frame buffer interface
+ */
+
+static struct omap_hwmod_class_sysconfig omap2_rfbi_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class omap2_rfbi_hwmod_class = {
+ .name = "rfbi",
+ .sysc = &omap2_rfbi_sysc,
+};
+
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index a5ea988..d76694b 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -75,9 +75,9 @@
/* Clear old wake-up events */
/* REVISIT: These write to reserved bits? */
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
- omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+ omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
@@ -104,23 +104,18 @@
clk_enable(osc_ck);
/* clear CORE wake-up events */
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
- omap2_prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
+ omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1);
/* MPU domain wake events */
- l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
- if (l & 0x01)
- omap2_prm_write_mod_reg(0x01, OCP_MOD,
- OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
- if (l & 0x20)
- omap2_prm_write_mod_reg(0x20, OCP_MOD,
- OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
+ 0x1);
- /* Mask future PRCM-to-MPU interrupts */
- omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
+ 0x20);
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON);
@@ -148,9 +143,9 @@
* it is in retention mode. */
if (omap2_allow_mpu_retention()) {
/* REVISIT: These write to reserved bits? */
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
- omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+ omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
/* Try to enter MPU retention */
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 507d8ee..3f80929 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -133,60 +133,13 @@
}
}
-/*
- * PRCM Interrupt Handler Helper Function
- *
- * The purpose of this function is to clear any wake-up events latched
- * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
- * may occur whilst attempting to clear a PM_WKST_x register and thus
- * set another bit in this register. A while loop is used to ensure
- * that any peripheral wake-up events occurring while attempting to
- * clear the PM_WKST_x are detected and cleared.
- */
-static int prcm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
-{
- u32 wkst, fclk, iclk, clken;
- u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
- u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
- u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
- u16 grpsel_off = (regs == 3) ?
- OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
- int c = 0;
-
- wkst = omap2_prm_read_mod_reg(module, wkst_off);
- wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
- wkst &= ~ignore_bits;
- if (wkst) {
- iclk = omap2_cm_read_mod_reg(module, iclk_off);
- fclk = omap2_cm_read_mod_reg(module, fclk_off);
- while (wkst) {
- clken = wkst;
- omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
- /*
- * For USBHOST, we don't know whether HOST1 or
- * HOST2 woke us up, so enable both f-clocks
- */
- if (module == OMAP3430ES2_USBHOST_MOD)
- clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
- omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
- omap2_prm_write_mod_reg(wkst, module, wkst_off);
- wkst = omap2_prm_read_mod_reg(module, wkst_off);
- wkst &= ~ignore_bits;
- c++;
- }
- omap2_cm_write_mod_reg(iclk, module, iclk_off);
- omap2_cm_write_mod_reg(fclk, module, fclk_off);
- }
-
- return c;
-}
-
static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
{
int c;
- c = prcm_clear_mod_irqs(WKUP_MOD, 1,
- ~(OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK));
+ c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
+ ~(OMAP3430_ST_IO_MASK |
+ OMAP3430_ST_IO_CHAIN_MASK));
return c ? IRQ_HANDLED : IRQ_NONE;
}
@@ -200,13 +153,14 @@
* these are handled in a separate handler to avoid acking
* IO events before parsing in mux code
*/
- c = prcm_clear_mod_irqs(WKUP_MOD, 1,
- OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK);
- c += prcm_clear_mod_irqs(CORE_MOD, 1, 0);
- c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
+ c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
+ OMAP3430_ST_IO_MASK |
+ OMAP3430_ST_IO_CHAIN_MASK);
+ c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, 0);
+ c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
if (omap_rev() > OMAP3430_REV_ES1_0) {
- c += prcm_clear_mod_irqs(CORE_MOD, 3, 0);
- c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
+ c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, 0);
+ c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
}
return c ? IRQ_HANDLED : IRQ_NONE;
@@ -399,159 +353,11 @@
#define omap3_pm_suspend NULL
#endif /* CONFIG_SUSPEND */
-
-/**
- * omap3_iva_idle(): ensure IVA is in idle so it can be put into
- * retention
- *
- * In cases where IVA2 is activated by bootcode, it may prevent
- * full-chip retention or off-mode because it is not idle. This
- * function forces the IVA2 into idle state so it can go
- * into retention/off and thus allow full-chip retention/off.
- *
- **/
-static void __init omap3_iva_idle(void)
-{
- /* ensure IVA2 clock is disabled */
- omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
-
- /* if no clock activity, nothing else to do */
- if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
- OMAP3430_CLKACTIVITY_IVA2_MASK))
- return;
-
- /* Reset IVA2 */
- omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
- OMAP3430_RST2_IVA2_MASK |
- OMAP3430_RST3_IVA2_MASK,
- OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
- /* Enable IVA2 clock */
- omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
- OMAP3430_IVA2_MOD, CM_FCLKEN);
-
- /* Set IVA2 boot mode to 'idle' */
- omap3_ctrl_set_iva_bootmode_idle();
-
- /* Un-reset IVA2 */
- omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
- /* Disable IVA2 clock */
- omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
-
- /* Reset IVA2 */
- omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
- OMAP3430_RST2_IVA2_MASK |
- OMAP3430_RST3_IVA2_MASK,
- OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-}
-
-static void __init omap3_d2d_idle(void)
-{
- u16 mask, padconf;
-
- /* In a stand alone OMAP3430 where there is not a stacked
- * modem for the D2D Idle Ack and D2D MStandby must be pulled
- * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
- * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
- mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
- padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
- padconf |= mask;
- omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
-
- padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
- padconf |= mask;
- omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
-
- /* reset modem */
- omap2_prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
- OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
- CORE_MOD, OMAP2_RM_RSTCTRL);
- omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
-}
-
static void __init prcm_setup_regs(void)
{
- u32 omap3630_en_uart4_mask = cpu_is_omap3630() ?
- OMAP3630_EN_UART4_MASK : 0;
- u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
- OMAP3630_GRPSEL_UART4_MASK : 0;
+ omap3_ctrl_init();
- /* XXX This should be handled by hwmod code or SCM init code */
- omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
-
- /*
- * Enable control of expternal oscillator through
- * sys_clkreq. In the long run clock framework should
- * take care of this.
- */
- omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
- 1 << OMAP_AUTOEXTCLKMODE_SHIFT,
- OMAP3430_GR_MOD,
- OMAP3_PRM_CLKSRC_CTRL_OFFSET);
-
- /* setup wakup source */
- omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
- OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
- WKUP_MOD, PM_WKEN);
- /* No need to write EN_IO, that is always enabled */
- omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
- OMAP3430_GRPSEL_GPT1_MASK |
- OMAP3430_GRPSEL_GPT12_MASK,
- WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
-
- /* Enable PM_WKEN to support DSS LPR */
- omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
- OMAP3430_DSS_MOD, PM_WKEN);
-
- /* Enable wakeups in PER */
- omap2_prm_write_mod_reg(omap3630_en_uart4_mask |
- OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
- OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
- OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
- OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK |
- OMAP3430_EN_MCBSP4_MASK,
- OMAP3430_PER_MOD, PM_WKEN);
- /* and allow them to wake up MPU */
- omap2_prm_write_mod_reg(omap3630_grpsel_uart4_mask |
- OMAP3430_GRPSEL_GPIO2_MASK |
- OMAP3430_GRPSEL_GPIO3_MASK |
- OMAP3430_GRPSEL_GPIO4_MASK |
- OMAP3430_GRPSEL_GPIO5_MASK |
- OMAP3430_GRPSEL_GPIO6_MASK |
- OMAP3430_GRPSEL_UART3_MASK |
- OMAP3430_GRPSEL_MCBSP2_MASK |
- OMAP3430_GRPSEL_MCBSP3_MASK |
- OMAP3430_GRPSEL_MCBSP4_MASK,
- OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
-
- /* Don't attach IVA interrupts */
- if (omap3_has_iva()) {
- omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
- omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
- omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
- omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD,
- OMAP3430_PM_IVAGRPSEL);
- }
-
- /* Clear any pending 'reset' flags */
- omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, OMAP2_RM_RSTST);
-
- /* Clear any pending PRCM interrupts */
- omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-
- /*
- * We need to idle iva2_pwrdm even on am3703 with no iva2.
- */
- omap3_iva_idle();
-
- omap3_d2d_idle();
+ omap3_prm_init_pm(cpu_is_omap3630(), omap3_has_iva());
}
void omap3_pm_off_mode_enable(int enable)
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index 7785be9..ad7b3e9 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -142,5 +142,6 @@
#define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET 0x05B8
#define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
+#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
#endif
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
index a3a3cca..8695805 100644
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -114,6 +114,24 @@
omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTCTRL);
}
+/**
+ * omap2xxx_prm_clear_mod_irqs - clear wakeup status bits for a module
+ * @module: PRM module to clear wakeups from
+ * @regs: register offset to clear
+ * @wkst_mask: wakeup status mask to clear
+ *
+ * Clears wakeup status bits for a given module, so that the device can
+ * re-enter idle.
+ */
+void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
+{
+ u32 wkst;
+
+ wkst = omap2_prm_read_mod_reg(module, regs);
+ wkst &= wkst_mask;
+ omap2_prm_write_mod_reg(wkst, module, regs);
+}
+
int omap2xxx_clkdm_sleep(struct clockdomain *clkdm)
{
omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
index d2cb636..d734141 100644
--- a/arch/arm/mach-omap2/prm2xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx.h
@@ -125,6 +125,7 @@
extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
extern void omap2xxx_prm_dpll_reset(void);
+void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
extern int __init omap2xxx_prm_init(void);
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 4bd7a2d..2458be6 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -26,6 +26,8 @@
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
+#include "cm3xxx.h"
+#include "cm-regbits-34xx.h"
static const struct omap_prcm_irq omap3_prcm_irqs[] = {
OMAP_PRCM_IRQ("wkup", 0, 0),
@@ -206,6 +208,167 @@
}
/**
+ * omap3xxx_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
+ * @module: PRM module to clear wakeups from
+ * @regs: register set to clear, 1 or 3
+ * @ignore_bits: wakeup status bits to ignore
+ *
+ * The purpose of this function is to clear any wake-up events latched
+ * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
+ * may occur whilst attempting to clear a PM_WKST_x register and thus
+ * set another bit in this register. A while loop is used to ensure
+ * that any peripheral wake-up events occurring while attempting to
+ * clear the PM_WKST_x are detected and cleared.
+ */
+int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
+{
+ u32 wkst, fclk, iclk, clken;
+ u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
+ u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
+ u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
+ u16 grpsel_off = (regs == 3) ?
+ OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
+ int c = 0;
+
+ wkst = omap2_prm_read_mod_reg(module, wkst_off);
+ wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
+ wkst &= ~ignore_bits;
+ if (wkst) {
+ iclk = omap2_cm_read_mod_reg(module, iclk_off);
+ fclk = omap2_cm_read_mod_reg(module, fclk_off);
+ while (wkst) {
+ clken = wkst;
+ omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
+ /*
+ * For USBHOST, we don't know whether HOST1 or
+ * HOST2 woke us up, so enable both f-clocks
+ */
+ if (module == OMAP3430ES2_USBHOST_MOD)
+ clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
+ omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
+ omap2_prm_write_mod_reg(wkst, module, wkst_off);
+ wkst = omap2_prm_read_mod_reg(module, wkst_off);
+ wkst &= ~ignore_bits;
+ c++;
+ }
+ omap2_cm_write_mod_reg(iclk, module, iclk_off);
+ omap2_cm_write_mod_reg(fclk, module, fclk_off);
+ }
+
+ return c;
+}
+
+/**
+ * omap3_prm_reset_modem - toggle reset signal for modem
+ *
+ * Toggles the reset signal to modem IP block. Required to allow
+ * OMAP3430 without stacked modem to idle properly.
+ */
+void __init omap3_prm_reset_modem(void)
+{
+ omap2_prm_write_mod_reg(
+ OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
+ OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
+ CORE_MOD, OMAP2_RM_RSTCTRL);
+ omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
+}
+
+/**
+ * omap3_prm_init_pm - initialize PM related registers for PRM
+ * @has_uart4: SoC has UART4
+ * @has_iva: SoC has IVA
+ *
+ * Initializes PRM registers for PM use. Called from PM init.
+ */
+void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
+{
+ u32 en_uart4_mask;
+ u32 grpsel_uart4_mask;
+
+ /*
+ * Enable control of expternal oscillator through
+ * sys_clkreq. In the long run clock framework should
+ * take care of this.
+ */
+ omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
+ 1 << OMAP_AUTOEXTCLKMODE_SHIFT,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+ /* setup wakup source */
+ omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
+ OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
+ WKUP_MOD, PM_WKEN);
+ /* No need to write EN_IO, that is always enabled */
+ omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
+ OMAP3430_GRPSEL_GPT1_MASK |
+ OMAP3430_GRPSEL_GPT12_MASK,
+ WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+
+ /* Enable PM_WKEN to support DSS LPR */
+ omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
+ OMAP3430_DSS_MOD, PM_WKEN);
+
+ if (has_uart4) {
+ en_uart4_mask = OMAP3630_EN_UART4_MASK;
+ grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK;
+ }
+
+ /* Enable wakeups in PER */
+ omap2_prm_write_mod_reg(en_uart4_mask |
+ OMAP3430_EN_GPIO2_MASK |
+ OMAP3430_EN_GPIO3_MASK |
+ OMAP3430_EN_GPIO4_MASK |
+ OMAP3430_EN_GPIO5_MASK |
+ OMAP3430_EN_GPIO6_MASK |
+ OMAP3430_EN_UART3_MASK |
+ OMAP3430_EN_MCBSP2_MASK |
+ OMAP3430_EN_MCBSP3_MASK |
+ OMAP3430_EN_MCBSP4_MASK,
+ OMAP3430_PER_MOD, PM_WKEN);
+
+ /* and allow them to wake up MPU */
+ omap2_prm_write_mod_reg(grpsel_uart4_mask |
+ OMAP3430_GRPSEL_GPIO2_MASK |
+ OMAP3430_GRPSEL_GPIO3_MASK |
+ OMAP3430_GRPSEL_GPIO4_MASK |
+ OMAP3430_GRPSEL_GPIO5_MASK |
+ OMAP3430_GRPSEL_GPIO6_MASK |
+ OMAP3430_GRPSEL_UART3_MASK |
+ OMAP3430_GRPSEL_MCBSP2_MASK |
+ OMAP3430_GRPSEL_MCBSP3_MASK |
+ OMAP3430_GRPSEL_MCBSP4_MASK,
+ OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
+
+ /* Don't attach IVA interrupts */
+ if (has_iva) {
+ omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+ omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+ omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+ omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD,
+ OMAP3430_PM_IVAGRPSEL);
+ }
+
+ /* Clear any pending 'reset' flags */
+ omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD,
+ OMAP2_RM_RSTST);
+
+ /* Clear any pending PRCM interrupts */
+ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ /* We need to idle iva2_pwrdm even on am3703 with no iva2. */
+ omap3xxx_prm_iva_idle();
+
+ omap3_prm_reset_modem();
+}
+
+/**
* omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
*
* Clear any previously-latched I/O wakeup events and ensure that the
@@ -276,6 +439,76 @@
return r;
}
+/**
+ * omap3xxx_prm_iva_idle - ensure IVA is in idle so it can be put into retention
+ *
+ * In cases where IVA2 is activated by bootcode, it may prevent
+ * full-chip retention or off-mode because it is not idle. This
+ * function forces the IVA2 into idle state so it can go
+ * into retention/off and thus allow full-chip retention/off.
+ */
+void omap3xxx_prm_iva_idle(void)
+{
+ /* ensure IVA2 clock is disabled */
+ omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* if no clock activity, nothing else to do */
+ if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
+ OMAP3430_CLKACTIVITY_IVA2_MASK))
+ return;
+
+ /* Reset IVA2 */
+ omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+ OMAP3430_RST2_IVA2_MASK |
+ OMAP3430_RST3_IVA2_MASK,
+ OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+
+ /* Enable IVA2 clock */
+ omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
+ OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* Un-reset IVA2 */
+ omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+
+ /* Disable IVA2 clock */
+ omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* Reset IVA2 */
+ omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+ OMAP3430_RST2_IVA2_MASK |
+ OMAP3430_RST3_IVA2_MASK,
+ OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+}
+
+/**
+ * omap3xxx_prm_clear_global_cold_reset - checks the global cold reset status
+ * and clears it if asserted
+ *
+ * Checks if cold-reset has occurred and clears the status bit if yes. Returns
+ * 1 if cold-reset has occurred, 0 otherwise.
+ */
+int omap3xxx_prm_clear_global_cold_reset(void)
+{
+ if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
+ OMAP3430_GLOBAL_COLD_RST_MASK) {
+ omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_RSTST_OFFSET);
+ return 1;
+ }
+
+ return 0;
+}
+
+void omap3_prm_save_scratchpad_contents(u32 *ptr)
+{
+ *ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+ *ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSEL_OFFSET);
+}
+
/* Powerdomain low-level functions */
static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 1dacfc5..bc37d42 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -162,6 +162,12 @@
extern int __init omap3xxx_prm_init(void);
extern u32 omap3xxx_prm_get_reset_sources(void);
+int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
+void omap3xxx_prm_iva_idle(void);
+void omap3_prm_reset_modem(void);
+int omap3xxx_prm_clear_global_cold_reset(void);
+void omap3_prm_save_scratchpad_contents(u32 *ptr);
+void omap3_prm_init_pm(bool has_uart4, bool has_iva);
#endif /* __ASSEMBLER */
diff --git a/arch/arm/mach-omap2/prm7xx.h b/arch/arm/mach-omap2/prm7xx.h
index d92a840..4bb50fbf 100644
--- a/arch/arm/mach-omap2/prm7xx.h
+++ b/arch/arm/mach-omap2/prm7xx.h
@@ -374,6 +374,10 @@
#define DRA7XX_RM_L3INIT_IEEE1500_2_OCP_CONTEXT_OFFSET 0x007c
#define DRA7XX_PM_L3INIT_SATA_WKDEP_OFFSET 0x0088
#define DRA7XX_RM_L3INIT_SATA_CONTEXT_OFFSET 0x008c
+#define DRA7XX_PM_L3INIT_PCIESS1_WKDEP_OFFSET 0x00b0
+#define DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET 0x00b4
+#define DRA7XX_PM_L3INIT_PCIESS2_WKDEP_OFFSET 0x00b8
+#define DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET 0x00bc
#define DRA7XX_RM_GMAC_GMAC_CONTEXT_OFFSET 0x00d4
#define DRA7XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET 0x00e4
#define DRA7XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET 0x00ec
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 7980730..4508643 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -12,6 +12,7 @@
select NO_IOPORT_MAP
select PINCTRL
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_HAS_OPP
if ARCH_SHMOBILE_MULTI
@@ -25,6 +26,11 @@
bool "RZ/A1H (R7S72100)"
select SYS_SUPPORTS_SH_MTU2
+config ARCH_R8A7779
+ bool "R-Car H1 (R8A77790)"
+ select RENESAS_INTC_IRQPIN
+ select SYS_SUPPORTS_SH_TMU
+
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
select RENESAS_IRQC
@@ -51,6 +57,11 @@
depends on ARCH_R8A7790
select MICREL_PHY if SH_ETH
+config MACH_MARZEN
+ bool "MARZEN board"
+ depends on ARCH_R8A7779
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+
comment "Renesas ARM SoCs System Configuration"
endif
@@ -234,19 +245,6 @@
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
-config MACH_MARZEN_REFERENCE
- bool "MARZEN board - Reference Device Tree Implementation"
- depends on ARCH_R8A7779
- select ARCH_REQUIRE_GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select USE_OF
- ---help---
- Use reference implementation of Marzen board support
- which makes use of device tree at the expense
- of not supporting a number of devices.
-
- This is intended to aid developers
-
config MACH_LAGER
bool "Lager board"
depends on ARCH_R8A7790
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 38d5fe8..fe3878a 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -34,31 +34,39 @@
obj-$(CONFIG_ARCH_R7S72100) += clock-r7s72100.o
endif
+# CPU reset vector handling objects
+cpu-y := platsmp.o headsmp.o
+cpu-$(CONFIG_ARCH_R8A7790) += platsmp-apmu.o
+cpu-$(CONFIG_ARCH_R8A7791) += platsmp-apmu.o
+
# SMP objects
-smp-y := platsmp.o headsmp.o
+smp-y := $(cpu-y)
smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o platsmp-scu.o
smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o platsmp-scu.o
-smp-$(CONFIG_ARCH_R8A7790) += smp-r8a7790.o platsmp-apmu.o
-smp-$(CONFIG_ARCH_R8A7791) += smp-r8a7791.o platsmp-apmu.o
+smp-$(CONFIG_ARCH_R8A7790) += smp-r8a7790.o
+smp-$(CONFIG_ARCH_R8A7791) += smp-r8a7791.o
smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o
-# IRQ objects
-obj-$(CONFIG_ARCH_SH7372) += entry-intc.o
-
# PM objects
obj-$(CONFIG_SUSPEND) += suspend.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_ARCH_SH7372) += pm-sh7372.o sleep-sh7372.o pm-rmobile.o
obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o
obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o pm-rmobile.o
obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o pm-rcar.o
-obj-$(CONFIG_ARCH_R8A7790) += pm-r8a7790.o pm-rcar.o
+obj-$(CONFIG_ARCH_R8A7790) += pm-r8a7790.o pm-rcar.o $(cpu-y)
+obj-$(CONFIG_ARCH_R8A7791) += pm-r8a7791.o pm-rcar.o $(cpu-y)
+
+# IRQ objects
+obj-$(CONFIG_ARCH_SH7372) += entry-intc.o
# Board objects
ifdef CONFIG_ARCH_SHMOBILE_MULTI
obj-$(CONFIG_MACH_GENMAI) += board-genmai-reference.o
obj-$(CONFIG_MACH_KOELSCH) += board-koelsch-reference.o
obj-$(CONFIG_MACH_LAGER) += board-lager-reference.o
+obj-$(CONFIG_MACH_MARZEN) += board-marzen-reference.o
else
obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
obj-$(CONFIG_MACH_APE6EVM_REFERENCE) += board-ape6evm-reference.o
@@ -67,7 +75,6 @@
obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
obj-$(CONFIG_MACH_GENMAI) += board-genmai.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
-obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o
obj-$(CONFIG_MACH_LAGER) += board-lager.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 918fccf..ebf97d4 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -13,7 +13,6 @@
loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
-loadaddr-$(CONFIG_MACH_MARZEN_REFERENCE) += 0x60008000
__ZRELADDR := $(sort $(loadaddr-y))
zreladdr-y += $(__ZRELADDR)
diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c
index 3276afc..2f7723e 100644
--- a/arch/arm/mach-shmobile/board-ape6evm-reference.c
+++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c
@@ -24,11 +24,13 @@
#include <linux/pinctrl/machine.h>
#include <linux/platform_device.h>
#include <linux/sh_clk.h>
-#include <mach/common.h>
-#include <mach/r8a73a4.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "r8a73a4.h"
+
static void __init ape6evm_add_standard_devices(void)
{
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index fe071a9..4855678 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -33,12 +33,14 @@
#include <linux/regulator/machine.h>
#include <linux/sh_clk.h>
#include <linux/smsc911x.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a73a4.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a73a4.h"
+
/* LEDS */
static struct gpio_led ape6evm_leds[] = {
{
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index f660fbb..2085766 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -24,11 +24,13 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/io.h>
-#include <mach/common.h>
-#include <mach/r8a7740.h>
+
#include <asm/mach/arch.h>
#include <asm/hardware/cache-l2x0.h>
+#include "common.h"
+#include "r8a7740.h"
+
/*
* CON1 Camera Module
* CON2 Extension Bus
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 30fcac7..32339cf 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -45,9 +45,7 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/i2c-gpio.h>
#include <linux/reboot.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a7740.h>
+
#include <media/mt9t112.h>
#include <media/sh_mobile_ceu.h>
#include <media/soc_camera.h>
@@ -62,6 +60,10 @@
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
+#include "common.h"
+#include "irqs.h"
+#include "pm-rmobile.h"
+#include "r8a7740.h"
#include "sh-gpio.h"
/*
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c
index 027373f..ba840cd 100644
--- a/arch/arm/mach-shmobile/board-bockw-reference.c
+++ b/arch/arm/mach-shmobile/board-bockw-reference.c
@@ -19,10 +19,12 @@
*/
#include <linux/of_platform.h>
-#include <mach/common.h>
-#include <mach/r8a7778.h>
+
#include <asm/mach/arch.h>
+#include "common.h"
+#include "r8a7778.h"
+
/*
* see board-bock.c for checking detail of dip-switch
*/
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index f444be2..b4e4789 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -34,14 +34,16 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb/renesas_usbhs.h>
+
#include <media/soc_camera.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a7778.h>
#include <asm/mach/arch.h>
#include <sound/rcar_snd.h>
#include <sound/simple_card.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7778.h"
+
#define FPGA 0x18200000
#define IRQ0MR 0x30
#define COMCTLR 0x101c
diff --git a/arch/arm/mach-shmobile/board-genmai-reference.c b/arch/arm/mach-shmobile/board-genmai-reference.c
index 2ff6ad6..e5448f7 100644
--- a/arch/arm/mach-shmobile/board-genmai-reference.c
+++ b/arch/arm/mach-shmobile/board-genmai-reference.c
@@ -20,12 +20,14 @@
#include <linux/kernel.h>
#include <linux/of_platform.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/r7s72100.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "clock.h"
+#include "common.h"
+#include "r7s72100.h"
+
/*
* This is a really crude hack to provide clkdev support to platform
* devices until they get moved to DT.
@@ -47,7 +49,7 @@
};
DT_MACHINE_START(GENMAI_DT, "genmai")
- .init_early = r7s72100_init_early,
+ .init_early = shmobile_init_delay,
.init_machine = genmai_add_standard_devices,
.dt_compat = genmai_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c
index c94201e..e2a3ba4 100644
--- a/arch/arm/mach-shmobile/board-genmai.c
+++ b/arch/arm/mach-shmobile/board-genmai.c
@@ -25,12 +25,14 @@
#include <linux/sh_eth.h>
#include <linux/spi/rspi.h>
#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r7s72100.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "irqs.h"
+#include "r7s72100.h"
+
/* Ether */
static const struct sh_eth_plat_data ether_pdata __initconst = {
.phy = 0x00, /* PD60610 */
@@ -154,7 +156,7 @@
};
DT_MACHINE_START(GENMAI_DT, "genmai")
- .init_early = r7s72100_init_early,
+ .init_early = shmobile_init_delay,
.init_machine = genmai_add_standard_devices,
.dt_compat = genmai_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c
index d322a16..0b1fb23 100644
--- a/arch/arm/mach-shmobile/board-koelsch-reference.c
+++ b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -23,13 +23,15 @@
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/platform_data/rcar-du.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/rcar-gen2.h>
-#include <mach/r8a7791.h>
+
#include <asm/mach/arch.h>
+#include "clock.h"
+#include "common.h"
+#include "irqs.h"
+#include "r8a7791.h"
+#include "rcar-gen2.h"
+
/* DU */
static struct rcar_du_encoder_data koelsch_du_encoders[] = {
{
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
index c6c6889..e698b90 100644
--- a/arch/arm/mach-shmobile/board-koelsch.c
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -45,13 +45,15 @@
#include <linux/spi/flash.h>
#include <linux/spi/rspi.h>
#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a7791.h>
-#include <mach/rcar-gen2.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7791.h"
+#include "rcar-gen2.h"
+
/* DU */
static struct rcar_du_encoder_data koelsch_du_encoders[] = {
{
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index a735a1d..5d2621f 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -25,12 +25,14 @@
#include <linux/irq.h>
#include <linux/input.h>
#include <linux/of_platform.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
+
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "sh73a0.h"
+
static void __init kzm_init(void)
{
sh73a0_add_standard_devices_dt();
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index f94ec8c..1320e9d 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -41,16 +41,18 @@
#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/videodev2.h>
+
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <video/sh_mobile_lcdc.h>
+#include "common.h"
+#include "irqs.h"
+#include "sh73a0.h"
+
/*
* external GPIO
*/
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index 749832e..8dcff51 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -22,13 +22,15 @@
#include <linux/init.h>
#include <linux/of_platform.h>
#include <linux/platform_data/rcar-du.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/rcar-gen2.h>
-#include <mach/r8a7790.h>
+
#include <asm/mach/arch.h>
+#include "clock.h"
+#include "common.h"
+#include "irqs.h"
+#include "r8a7790.h"
+#include "rcar-gen2.h"
+
/* DU */
static struct rcar_du_encoder_data lager_du_encoders[] = {
{
@@ -129,7 +131,7 @@
DT_MACHINE_START(LAGER_DT, "lager")
.smp = smp_ops(r8a7790_smp_ops),
- .init_early = r8a7790_init_early,
+ .init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
.init_machine = lager_add_standard_devices,
.init_late = shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index f8b1e05..bfd9e48 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -31,6 +31,8 @@
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/camera-rcar.h>
#include <linux/platform_data/gpio-rcar.h>
@@ -43,22 +45,23 @@
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/sh_eth.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a7790.h>
-#include <media/soc_camera.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/mtd.h>
#include <linux/spi/flash.h>
#include <linux/spi/rspi.h>
#include <linux/spi/spi.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/renesas_usbhs.h>
+
+#include <media/soc_camera.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
#include <sound/rcar_snd.h>
#include <sound/simple_card.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7790.h"
+#include "rcar-gen2.h"
+
/*
* SSI-AK4643
*
@@ -886,7 +889,7 @@
DT_MACHINE_START(LAGER_DT, "lager")
.smp = smp_ops(r8a7790_smp_ops),
- .init_early = r8a7790_init_early,
+ .init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
.init_machine = lager_init,
.init_late = shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 0ff4d8e..304b76f 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -47,10 +47,11 @@
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
-#include <linux/sh_intc.h>
+#include <linux/sh_clk.h>
#include <linux/tca6416_keypad.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/dma-mapping.h>
+
#include <video/sh_mobile_hdmi.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
@@ -58,15 +59,14 @@
#include <media/soc_camera_platform.h>
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
-
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/sh7372.h>
-
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include "common.h"
+#include "irqs.h"
+#include "pm-rmobile.h"
#include "sh-gpio.h"
+#include "sh7372.h"
/*
* Address Interface BusWidth note
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c
index 2773936..21b3e1c 100644
--- a/arch/arm/mach-shmobile/board-marzen-reference.c
+++ b/arch/arm/mach-shmobile/board-marzen-reference.c
@@ -19,19 +19,42 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <mach/r8a7779.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
+#include <linux/clk/shmobile.h>
+#include <linux/clocksource.h>
+#include <linux/of_platform.h>
+
#include <asm/irq.h>
#include <asm/mach/arch.h>
+#include "clock.h"
+#include "common.h"
+#include "irqs.h"
+#include "r8a7779.h"
+
+static void __init marzen_init_timer(void)
+{
+ r8a7779_clocks_init(r8a7779_read_mode_pins());
+ clocksource_of_init();
+}
+
+/*
+ * This is a really crude hack to provide clkdev support to platform
+ * devices until they get moved to DT.
+ */
+static const struct clk_name clk_names[] __initconst = {
+ { "tmu0", "fck", "sh-tmu.0" },
+};
+
static void __init marzen_init(void)
{
+ shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
r8a7779_add_standard_devices_dt();
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
r8a7779_init_irq_extpin_dt(1); /* IRQ1 as individual interrupt */
}
static const char *marzen_boards_compat_dt[] __initdata = {
+ "renesas,marzen",
"renesas,marzen-reference",
NULL,
};
@@ -39,7 +62,8 @@
DT_MACHINE_START(MARZEN, "marzen")
.smp = smp_ops(r8a7779_smp_ops),
.map_io = r8a7779_map_io,
- .init_early = r8a7779_init_delay,
+ .init_early = shmobile_init_delay,
+ .init_time = marzen_init_timer,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = r8a7779_init_irq_dt,
.init_machine = marzen_init,
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index d832a44..25a1037 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -41,14 +41,16 @@
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
+
#include <media/soc_camera.h>
-#include <mach/r8a7779.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/traps.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7779.h"
+
/* Fixed 3.3V regulator to be used by SDHI0 */
static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
index df18748..3eb2ec4 100644
--- a/arch/arm/mach-shmobile/clock-r7s72100.c
+++ b/arch/arm/mach-shmobile/clock-r7s72100.c
@@ -19,8 +19,9 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/common.h>
-#include <mach/r7s72100.h>
+
+#include "common.h"
+#include "r7s72100.h"
/* Frequency Control Registers */
#define FRQCR 0xfcfe0010
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index b5bc22c..49d1397 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -22,8 +22,8 @@
#include <linux/kernel.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include "common.h"
+#include "clock.h"
#define CPG_BASE 0xe6150000
#define CPG_LEN 0x270
@@ -574,11 +574,17 @@
/* MSTP */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
+ CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
+ CLKDEV_DEV_ID("e6c50000.serial", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
+ CLKDEV_DEV_ID("e6c20000.serial", &mstp_clks[MSTP206]),
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
+ CLKDEV_DEV_ID("e6c30000.serial", &mstp_clks[MSTP207]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
+ CLKDEV_DEV_ID("e6ce0000.serial", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
+ CLKDEV_DEV_ID("e6cf0000.serial", &mstp_clks[MSTP217]),
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
CLKDEV_DEV_ID("e6700020.dma-controller", &mstp_clks[MSTP218]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 50931e3..a60c324 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -22,9 +22,10 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/r8a7740.h>
+
+#include "clock.h"
+#include "common.h"
+#include "r8a7740.h"
/*
* | MDx | XTAL1/EXTAL1 | System | EXTALR |
@@ -555,27 +556,27 @@
CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP128]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]),
- CLKDEV_DEV_ID("e6c80000.sci", &mstp_clks[MSTP200]),
+ CLKDEV_DEV_ID("e6c80000.serial", &mstp_clks[MSTP200]),
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]),
- CLKDEV_DEV_ID("e6c70000.sci", &mstp_clks[MSTP201]),
+ CLKDEV_DEV_ID("e6c70000.serial", &mstp_clks[MSTP201]),
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]),
- CLKDEV_DEV_ID("e6c60000.sci", &mstp_clks[MSTP202]),
+ CLKDEV_DEV_ID("e6c60000.serial", &mstp_clks[MSTP202]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
- CLKDEV_DEV_ID("e6c50000.sci", &mstp_clks[MSTP203]),
+ CLKDEV_DEV_ID("e6c50000.serial", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
- CLKDEV_DEV_ID("e6c40000.sci", &mstp_clks[MSTP204]),
+ CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]),
- CLKDEV_DEV_ID("e6c30000.sci", &mstp_clks[MSTP206]),
+ CLKDEV_DEV_ID("e6c30000.serial", &mstp_clks[MSTP206]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]),
- CLKDEV_DEV_ID("e6cb0000.sci", &mstp_clks[MSTP207]),
+ CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]),
CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]),
CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]),
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP222]),
- CLKDEV_DEV_ID("e6cd0000.sci", &mstp_clks[MSTP222]),
+ CLKDEV_DEV_ID("e6cd0000.serial", &mstp_clks[MSTP222]),
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]),
- CLKDEV_DEV_ID("e6cc0000.sci", &mstp_clks[MSTP230]),
+ CLKDEV_DEV_ID("e6cc0000.serial", &mstp_clks[MSTP230]),
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]),
CLKDEV_DEV_ID("fe1f0000.sound", &mstp_clks[MSTP328]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index 13f8f3a..9557907 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -39,8 +39,8 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include "clock.h"
+#include "common.h"
#define MSTPCR0 IOMEM(0xffc80030)
#define MSTPCR1 IOMEM(0xffc80034)
@@ -202,11 +202,17 @@
CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
+ CLKDEV_DEV_ID("ffe40000.serial", &mstp_clks[MSTP026]), /* SCIF0 */
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
+ CLKDEV_DEV_ID("ffe41000.serial", &mstp_clks[MSTP025]), /* SCIF1 */
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
+ CLKDEV_DEV_ID("ffe42000.serial", &mstp_clks[MSTP024]), /* SCIF2 */
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
+ CLKDEV_DEV_ID("ffe43000.serial", &mstp_clks[MSTP023]), /* SCIF3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
+ CLKDEV_DEV_ID("ffe44000.serial", &mstp_clks[MSTP022]), /* SCIF4 */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
+ CLKDEV_DEV_ID("ffe45000.serial", &mstp_clks[MSTP021]), /* SCIF5 */
CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index a13298b..c51f9db 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -23,8 +23,11 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include <linux/sh_timer.h>
+
+#include "clock.h"
+#include "common.h"
+#include "r8a7779.h"
/*
* MD1 = 1 MD1 = 0
@@ -52,9 +55,6 @@
#define MSTPCR3 IOMEM(0xffc8003c)
#define MSTPSR1 IOMEM(0xffc80044)
-#define MODEMR 0xffcc0020
-
-
/* ioremap() through clock mapping mandatory to avoid
* collision with ARM coherent DMA virtual memory range.
*/
@@ -207,14 +207,9 @@
void __init r8a7779_clock_init(void)
{
- void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
- u32 mode;
+ u32 mode = r8a7779_read_mode_pins();
int k, ret = 0;
- BUG_ON(!modemr);
- mode = ioread32(modemr);
- iounmap(modemr);
-
if (mode & MD(1)) {
plla_clk.rate = 1500000000;
@@ -268,3 +263,13 @@
else
panic("failed to setup r8a7779 clocks\n");
}
+
+/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
+void __init __weak r8a7779_register_twd(void) { }
+
+void __init r8a7779_earlytimer_init(void)
+{
+ r8a7779_clock_init();
+ r8a7779_register_twd();
+ shmobile_earlytimer_init();
+}
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 296a057..17435c1 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -22,9 +22,11 @@
#include <linux/kernel.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/r8a7790.h>
+
+#include "clock.h"
+#include "common.h"
+#include "r8a7790.h"
+#include "rcar-gen2.h"
/*
* MD EXTAL PLL0 PLL1 PLL3
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index e2fdfcc..10e193d 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -23,9 +23,9 @@
#include <linux/kernel.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/rcar-gen2.h>
+#include "clock.h"
+#include "common.h"
+#include "rcar-gen2.h"
/*
* MD EXTAL PLL0 PLL1 PLL3
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index d16d9ca..7071676 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -21,8 +21,8 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include "clock.h"
+#include "common.h"
/* SH7372 registers */
#define FRQCRA IOMEM(0xe6150000)
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 0d9cd1f..9433a4e 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -22,8 +22,8 @@
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <asm/processor.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include "clock.h"
+#include "common.h"
#define FRQCRA IOMEM(0xe6150000)
#define FRQCRB IOMEM(0xe6150004)
@@ -638,16 +638,25 @@
CLKDEV_DEV_ID("e6820000.i2c", &mstp_clks[MSTP116]), /* I2C0 */
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
+ CLKDEV_DEV_ID("e6cd0000.serial", &mstp_clks[MSTP219]), /* SCIFA7 */
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* MP-DMAC */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
+ CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
+ CLKDEV_DEV_ID("0xe6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+ CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]), /* SCIFA0 */
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+ CLKDEV_DEV_ID("e6c50000.serial", &mstp_clks[MSTP203]), /* SCIFA1 */
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
+ CLKDEV_DEV_ID("e6c60000.serial", &mstp_clks[MSTP202]), /* SCIFA2 */
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
+ CLKDEV_DEV_ID("e6c70000.serial", &mstp_clks[MSTP201]), /* SCIFA3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
+ CLKDEV_DEV_ID("e6c80000.serial", &mstp_clks[MSTP200]), /* SCIFA4 */
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
+ CLKDEV_DEV_ID("e6cc0000.serial", &mstp_clks[MSTP331]), /* SCIFA6 */
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
CLKDEV_DEV_ID("ec230000.sound", &mstp_clks[MSTP328]), /* FSI */
CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
index e7232a0..806f940 100644
--- a/arch/arm/mach-shmobile/clock.c
+++ b/arch/arm/mach-shmobile/clock.c
@@ -25,7 +25,7 @@
#ifdef CONFIG_COMMON_CLK
#include <linux/clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
+#include "clock.h"
void __init shmobile_clk_workaround(const struct clk_name *clks,
int nr_clks, bool enable)
@@ -49,8 +49,8 @@
#else /* CONFIG_COMMON_CLK */
#include <linux/sh_clk.h>
#include <linux/export.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include "clock.h"
+#include "common.h"
unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk)
{
diff --git a/arch/arm/mach-shmobile/include/mach/clock.h b/arch/arm/mach-shmobile/clock.h
similarity index 100%
rename from arch/arm/mach-shmobile/include/mach/clock.h
rename to arch/arm/mach-shmobile/clock.h
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/common.h
similarity index 87%
rename from arch/arm/mach-shmobile/include/mach/common.h
rename to arch/arm/mach-shmobile/common.h
index f7a360e..9805608 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -35,8 +35,10 @@
#ifdef CONFIG_SUSPEND
int shmobile_suspend_init(void);
+void shmobile_smp_apmu_suspend_init(void);
#else
static inline int shmobile_suspend_init(void) { return 0; }
+static inline void shmobile_smp_apmu_suspend_init(void) { }
#endif
#ifdef CONFIG_CPU_IDLE
@@ -45,12 +47,19 @@
static inline int shmobile_cpuidle_init(void) { return 0; }
#endif
+#ifdef CONFIG_CPU_FREQ
+int shmobile_cpufreq_init(void);
+#else
+static inline int shmobile_cpufreq_init(void) { return 0; }
+#endif
+
extern void __iomem *shmobile_scu_base;
static inline void __init shmobile_init_late(void)
{
shmobile_suspend_init();
shmobile_cpuidle_init();
+ shmobile_cpufreq_init();
}
#endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c
index 9411a5b..f2e79f2 100644
--- a/arch/arm/mach-shmobile/console.c
+++ b/arch/arm/mach-shmobile/console.c
@@ -19,8 +19,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <mach/common.h>
#include <asm/mach/map.h>
+#include "common.h"
void __init shmobile_setup_console(void)
{
diff --git a/arch/arm/mach-shmobile/cpufreq.c b/arch/arm/mach-shmobile/cpufreq.c
new file mode 100644
index 0000000..8a24b2b
--- /dev/null
+++ b/arch/arm/mach-shmobile/cpufreq.c
@@ -0,0 +1,17 @@
+/*
+ * CPUFreq support code for SH-Mobile ARM
+ *
+ * Copyright (C) 2014 Gaku Inami
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+
+int __init shmobile_cpufreq_init(void)
+{
+ platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0);
+ return 0;
+}
diff --git a/arch/arm/mach-shmobile/include/mach/dma-register.h b/arch/arm/mach-shmobile/dma-register.h
similarity index 100%
rename from arch/arm/mach-shmobile/include/mach/dma-register.h
rename to arch/arm/mach-shmobile/dma-register.h
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index e5be5c8..faf8214 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -10,14 +10,17 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/linkage.h>
#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/threads.h>
#include <asm/memory.h>
+#ifdef CONFIG_SMP
ENTRY(shmobile_invalidate_start)
bl v7_invalidate_l1
b secondary_startup
ENDPROC(shmobile_invalidate_start)
+#endif
/*
* Reset vector for secondary CPUs.
@@ -68,7 +71,7 @@
shmobile_smp_boot_next:
add r1, r1, #1
- cmp r1, #CONFIG_NR_CPUS
+ cmp r1, #NR_CPUS
blo shmobile_smp_boot_find_mpidr
b shmobile_smp_sleep
@@ -85,10 +88,10 @@
.globl shmobile_smp_mpidr
shmobile_smp_mpidr:
-1: .space CONFIG_NR_CPUS * 4
+1: .space NR_CPUS * 4
.globl shmobile_smp_fn
shmobile_smp_fn:
-2: .space CONFIG_NR_CPUS * 4
+2: .space NR_CPUS * 4
.globl shmobile_smp_arg
shmobile_smp_arg:
-3: .space CONFIG_NR_CPUS * 4
+3: .space NR_CPUS * 4
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
index d241bfd..5aee83f 100644
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -1,24 +1,10 @@
#ifndef __ASM_MACH_IRQS_H
#define __ASM_MACH_IRQS_H
-#include <linux/sh_intc.h>
-
-/* GIC */
-#define gic_spi(nr) ((nr) + 32)
-#define gic_iid(nr) (nr) /* ICCIAR / interrupt ID */
-
-/* INTCS */
-#define INTCS_VECT_BASE 0x3400
-#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
-#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
+/* Stuck here until drivers/pinctl/sh-pfc gets rid of legacy code */
/* External IRQ pins */
#define IRQPIN_BASE 2000
#define irq_pin(nr) ((nr) + IRQPIN_BASE)
-/* GPIO IRQ */
-#define _GPIO_IRQ_BASE 2500
-#define GPIO_IRQ_BASE(x) (_GPIO_IRQ_BASE + (32 * x))
-#define GPIO_IRQ(x, y) (_GPIO_IRQ_BASE + (32 * x) + y)
-
#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index a91caad..e2af00b 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -22,11 +22,10 @@
#include <linux/module.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include <mach/intc.h>
-#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "intc.h"
+#include "irqs.h"
enum {
UNUSED_INTCA = 0,
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 19a26f4..44457a9 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -22,15 +22,16 @@
#include <linux/module.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <linux/sh_intc.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
-#include <mach/intc.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "intc.h"
+#include "irqs.h"
+#include "sh73a0.h"
+
enum {
UNUSED = 0,
diff --git a/arch/arm/mach-shmobile/include/mach/intc.h b/arch/arm/mach-shmobile/intc.h
similarity index 100%
rename from arch/arm/mach-shmobile/include/mach/intc.h
rename to arch/arm/mach-shmobile/intc.h
diff --git a/arch/arm/mach-shmobile/irqs.h b/arch/arm/mach-shmobile/irqs.h
new file mode 100644
index 0000000..4ff2d2a
--- /dev/null
+++ b/arch/arm/mach-shmobile/irqs.h
@@ -0,0 +1,21 @@
+#ifndef __SHMOBILE_IRQS_H
+#define __SHMOBILE_IRQS_H
+
+#include <linux/sh_intc.h>
+#include <mach/irqs.h>
+
+/* GIC */
+#define gic_spi(nr) ((nr) + 32)
+#define gic_iid(nr) (nr) /* ICCIAR / interrupt ID */
+
+/* INTCS */
+#define INTCS_VECT_BASE 0x3400
+#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
+#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
+
+/* GPIO IRQ */
+#define _GPIO_IRQ_BASE 2500
+#define GPIO_IRQ_BASE(x) (_GPIO_IRQ_BASE + (32 * x))
+#define GPIO_IRQ(x, y) (_GPIO_IRQ_BASE + (32 * x) + y)
+
+#endif /* __SHMOBILE_IRQS_H */
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index 8cb641c..2c06810 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -7,27 +7,32 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/cpu_pm.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/of_address.h>
#include <linux/smp.h>
+#include <linux/suspend.h>
+#include <linux/threads.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
+#include <asm/proc-fns.h>
#include <asm/smp_plat.h>
-#include <mach/common.h>
+#include <asm/suspend.h>
+#include "common.h"
static struct {
void __iomem *iomem;
int bit;
-} apmu_cpus[CONFIG_NR_CPUS];
+} apmu_cpus[NR_CPUS];
#define WUPCR_OFFS 0x10
#define PSTR_OFFS 0x40
#define CPUNCR_OFFS(n) (0x100 + (0x10 * (n)))
-static int apmu_power_on(void __iomem *p, int bit)
+static int __maybe_unused apmu_power_on(void __iomem *p, int bit)
{
/* request power on */
writel_relaxed(BIT(bit), p + WUPCR_OFFS);
@@ -46,7 +51,7 @@
return 0;
}
-static int apmu_power_off_poll(void __iomem *p, int bit)
+static int __maybe_unused apmu_power_off_poll(void __iomem *p, int bit)
{
int k;
@@ -69,7 +74,7 @@
static void apmu_init_cpu(struct resource *res, int cpu, int bit)
{
- if (apmu_cpus[cpu].iomem)
+ if ((cpu >= ARRAY_SIZE(apmu_cpus)) || apmu_cpus[cpu].iomem)
return;
apmu_cpus[cpu].iomem = ioremap_nocache(res->start, resource_size(res));
@@ -133,6 +138,7 @@
apmu_parse_cfg(apmu_init_cpu);
}
+#ifdef CONFIG_SMP
int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
/* For this particular CPU register boot vector */
@@ -140,8 +146,9 @@
return apmu_wrap(cpu, apmu_power_on);
}
+#endif
-#ifdef CONFIG_HOTPLUG_CPU
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_SUSPEND)
/* nicked from arch/arm/mach-exynos/hotplug.c */
static inline void cpu_enter_lowpower_a15(void)
{
@@ -172,16 +179,40 @@
dsb();
}
-void shmobile_smp_apmu_cpu_die(unsigned int cpu)
+void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu)
{
- /* For this particular CPU deregister boot vector */
- shmobile_smp_hook(cpu, 0, 0);
/* Select next sleep mode using the APMU */
apmu_wrap(cpu, apmu_power_off);
/* Do ARM specific CPU shutdown */
cpu_enter_lowpower_a15();
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " orr %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ : "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+#endif
+
+#if defined(CONFIG_HOTPLUG_CPU)
+void shmobile_smp_apmu_cpu_die(unsigned int cpu)
+{
+ /* For this particular CPU deregister boot vector */
+ shmobile_smp_hook(cpu, 0, 0);
+
+ /* Shutdown CPU core */
+ shmobile_smp_apmu_cpu_shutdown(cpu);
/* jump to shared mach-shmobile sleep / reset code */
shmobile_smp_sleep();
@@ -192,3 +223,25 @@
return apmu_wrap(cpu, apmu_power_off_poll);
}
#endif
+
+#if defined(CONFIG_SUSPEND)
+static int shmobile_smp_apmu_do_suspend(unsigned long cpu)
+{
+ shmobile_smp_hook(cpu, virt_to_phys(cpu_resume), 0);
+ shmobile_smp_apmu_cpu_shutdown(cpu);
+ cpu_do_idle(); /* WFI selects Core Standby */
+ return 1;
+}
+
+static int shmobile_smp_apmu_enter_suspend(suspend_state_t state)
+{
+ cpu_suspend(smp_processor_id(), shmobile_smp_apmu_do_suspend);
+ cpu_leave_lowpower();
+ return 0;
+}
+
+void __init shmobile_smp_apmu_suspend_init(void)
+{
+ shmobile_suspend_ops.enter = shmobile_smp_apmu_enter_suspend;
+}
+#endif
diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c
index 673ad6e..6466311 100644
--- a/arch/arm/mach-shmobile/platsmp-scu.c
+++ b/arch/arm/mach-shmobile/platsmp-scu.c
@@ -15,7 +15,7 @@
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
-#include <mach/common.h>
+#include "common.h"
static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
unsigned long action, void *hcpu)
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index 9ebc246..3923e09 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
-#include <mach/common.h>
+#include "common.h"
extern unsigned long shmobile_smp_fn[];
extern unsigned long shmobile_smp_arg[];
diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c
index 40b87aa..a0d44d5 100644
--- a/arch/arm/mach-shmobile/pm-r8a7740.c
+++ b/arch/arm/mach-shmobile/pm-r8a7740.c
@@ -10,8 +10,8 @@
*/
#include <linux/console.h>
#include <linux/suspend.h>
-#include <mach/pm-rmobile.h>
-#include <mach/common.h>
+#include "common.h"
+#include "pm-rmobile.h"
#ifdef CONFIG_PM
static int r8a7740_pd_a4s_suspend(void)
diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c
index d6fe189..69f70b7 100644
--- a/arch/arm/mach-shmobile/pm-r8a7779.c
+++ b/arch/arm/mach-shmobile/pm-r8a7779.c
@@ -13,20 +13,33 @@
#include <linux/suspend.h>
#include <linux/err.h>
#include <linux/pm_clock.h>
+#include <linux/pm_domain.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/console.h>
+
#include <asm/io.h>
-#include <mach/common.h>
-#include <mach/pm-rcar.h>
-#include <mach/r8a7779.h>
+
+#include "common.h"
+#include "pm-rcar.h"
+#include "r8a7779.h"
/* SYSC */
#define SYSCIER 0x0c
#define SYSCIMR 0x10
+struct r8a7779_pm_domain {
+ struct generic_pm_domain genpd;
+ struct rcar_sysc_ch ch;
+};
+
+static inline struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d)
+{
+ return &container_of(d, struct r8a7779_pm_domain, genpd)->ch;
+}
+
#if defined(CONFIG_PM) || defined(CONFIG_SMP)
static void __init r8a7779_sysc_init(void)
diff --git a/arch/arm/mach-shmobile/pm-r8a7790.c b/arch/arm/mach-shmobile/pm-r8a7790.c
index fc82839..80e8d95 100644
--- a/arch/arm/mach-shmobile/pm-r8a7790.c
+++ b/arch/arm/mach-shmobile/pm-r8a7790.c
@@ -11,9 +11,21 @@
*/
#include <linux/kernel.h>
+#include <linux/smp.h>
#include <asm/io.h>
-#include <mach/pm-rcar.h>
-#include <mach/r8a7790.h>
+#include "common.h"
+#include "pm-rcar.h"
+#include "r8a7790.h"
+
+/* RST */
+#define RST 0xe6160000
+#define CA15BAR 0x0020
+#define CA7BAR 0x0030
+#define CA15RESCNT 0x0040
+#define CA7RESCNT 0x0044
+
+/* On-chip RAM */
+#define MERAM 0xe8080000
/* SYSC */
#define SYSCIER 0x0c
@@ -38,8 +50,33 @@
void __init r8a7790_pm_init(void)
{
+ void __iomem *p;
+ u32 bar;
static int once;
- if (!once++)
- r8a7790_sysc_init();
+ if (once++)
+ return;
+
+ /* MERAM for jump stub, because BAR requires 256KB aligned address */
+ p = ioremap_nocache(MERAM, shmobile_boot_size);
+ memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+ iounmap(p);
+
+ /* setup reset vectors */
+ p = ioremap_nocache(RST, 0x63);
+ bar = (MERAM >> 8) & 0xfffffc00;
+ writel_relaxed(bar, p + CA15BAR);
+ writel_relaxed(bar, p + CA7BAR);
+ writel_relaxed(bar | 0x10, p + CA15BAR);
+ writel_relaxed(bar | 0x10, p + CA7BAR);
+
+ /* de-assert reset for all CPUs */
+ writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+ p + CA15RESCNT);
+ writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000,
+ p + CA7RESCNT);
+ iounmap(p);
+
+ r8a7790_sysc_init();
+ shmobile_smp_apmu_suspend_init();
}
diff --git a/arch/arm/mach-shmobile/pm-r8a7791.c b/arch/arm/mach-shmobile/pm-r8a7791.c
new file mode 100644
index 0000000..25f107b
--- /dev/null
+++ b/arch/arm/mach-shmobile/pm-r8a7791.c
@@ -0,0 +1,73 @@
+/*
+ * r8a7791 Power management support
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <asm/io.h>
+#include "common.h"
+#include "pm-rcar.h"
+#include "r8a7791.h"
+
+#define RST 0xe6160000
+#define CA15BAR 0x0020
+#define CA15RESCNT 0x0040
+#define RAM 0xe6300000
+
+/* SYSC */
+#define SYSCIER 0x0c
+#define SYSCIMR 0x10
+
+#if defined(CONFIG_SMP)
+
+static void __init r8a7791_sysc_init(void)
+{
+ void __iomem *base = rcar_sysc_init(0xe6180000);
+
+ /* enable all interrupt sources, but do not use interrupt handler */
+ iowrite32(0x0131000e, base + SYSCIER);
+ iowrite32(0, base + SYSCIMR);
+}
+
+#else /* CONFIG_SMP */
+
+static inline void r8a7791_sysc_init(void) {}
+
+#endif /* CONFIG_SMP */
+
+void __init r8a7791_pm_init(void)
+{
+ void __iomem *p;
+ u32 bar;
+ static int once;
+
+ if (once++)
+ return;
+
+ /* RAM for jump stub, because BAR requires 256KB aligned address */
+ p = ioremap_nocache(RAM, shmobile_boot_size);
+ memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+ iounmap(p);
+
+ /* setup reset vectors */
+ p = ioremap_nocache(RST, 0x63);
+ bar = (RAM >> 8) & 0xfffffc00;
+ writel_relaxed(bar, p + CA15BAR);
+ writel_relaxed(bar | 0x10, p + CA15BAR);
+
+ /* enable clocks to all CPUs */
+ writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+ p + CA15RESCNT);
+ iounmap(p);
+
+ r8a7791_sysc_init();
+ shmobile_smp_apmu_suspend_init();
+}
diff --git a/arch/arm/mach-shmobile/pm-rcar.c b/arch/arm/mach-shmobile/pm-rcar.c
index 1f465a1..34b8a56 100644
--- a/arch/arm/mach-shmobile/pm-rcar.c
+++ b/arch/arm/mach-shmobile/pm-rcar.c
@@ -13,7 +13,7 @@
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <asm/io.h>
-#include <mach/pm-rcar.h>
+#include "pm-rcar.h"
/* SYSC */
#define SYSCSR 0x00
diff --git a/arch/arm/mach-shmobile/include/mach/pm-rcar.h b/arch/arm/mach-shmobile/pm-rcar.h
similarity index 100%
rename from arch/arm/mach-shmobile/include/mach/pm-rcar.h
rename to arch/arm/mach-shmobile/pm-rcar.h
diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index f710235..ebdd16e 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -17,7 +17,7 @@
#include <linux/pm.h>
#include <linux/pm_clock.h>
#include <asm/io.h>
-#include <mach/pm-rmobile.h>
+#include "pm-rmobile.h"
/* SYSC */
#define SPDCR IOMEM(0xe6180008)
diff --git a/arch/arm/mach-shmobile/include/mach/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h
similarity index 100%
rename from arch/arm/mach-shmobile/include/mach/pm-rmobile.h
rename to arch/arm/mach-shmobile/pm-rmobile.h
diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c
index 0de75fd..7e5c267 100644
--- a/arch/arm/mach-shmobile/pm-sh7372.c
+++ b/arch/arm/mach-shmobile/pm-sh7372.c
@@ -21,13 +21,15 @@
#include <linux/irq.h>
#include <linux/bitrev.h>
#include <linux/console.h>
+
#include <asm/cpuidle.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
#include <asm/suspend.h>
-#include <mach/common.h>
-#include <mach/sh7372.h>
-#include <mach/pm-rmobile.h>
+
+#include "common.h"
+#include "pm-rmobile.h"
+#include "sh7372.h"
/* DBG */
#define DBGREG1 IOMEM(0xe6100020)
diff --git a/arch/arm/mach-shmobile/pm-sh73a0.c b/arch/arm/mach-shmobile/pm-sh73a0.c
index 99086e9..a7e4668 100644
--- a/arch/arm/mach-shmobile/pm-sh73a0.c
+++ b/arch/arm/mach-shmobile/pm-sh73a0.c
@@ -9,7 +9,7 @@
*/
#include <linux/suspend.h>
-#include <mach/common.h>
+#include "common.h"
#ifdef CONFIG_SUSPEND
static int sh73a0_enter_suspend(suspend_state_t suspend_state)
diff --git a/arch/arm/mach-shmobile/include/mach/r7s72100.h b/arch/arm/mach-shmobile/r7s72100.h
similarity index 82%
rename from arch/arm/mach-shmobile/include/mach/r7s72100.h
rename to arch/arm/mach-shmobile/r7s72100.h
index 5f34b20..efb723c 100644
--- a/arch/arm/mach-shmobile/include/mach/r7s72100.h
+++ b/arch/arm/mach-shmobile/r7s72100.h
@@ -3,6 +3,5 @@
void r7s72100_add_dt_devices(void);
void r7s72100_clock_init(void);
-void r7s72100_init_early(void);
#endif /* __ASM_R7S72100_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/r8a73a4.h
similarity index 100%
rename from arch/arm/mach-shmobile/include/mach/r8a73a4.h
rename to arch/arm/mach-shmobile/r8a73a4.h
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/r8a7740.h
similarity index 98%
rename from arch/arm/mach-shmobile/include/mach/r8a7740.h
rename to arch/arm/mach-shmobile/r8a7740.h
index 5e3c9ec..1d1a5fd 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7740.h
+++ b/arch/arm/mach-shmobile/r8a7740.h
@@ -19,8 +19,6 @@
#ifndef __ASM_R8A7740_H__
#define __ASM_R8A7740_H__
-#include <mach/pm-rmobile.h>
-
/*
* MD_CKx pin
*/
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/r8a7778.h
similarity index 100%
rename from arch/arm/mach-shmobile/include/mach/r8a7778.h
rename to arch/arm/mach-shmobile/r8a7778.h
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/r8a7779.h
similarity index 74%
rename from arch/arm/mach-shmobile/include/mach/r8a7779.h
rename to arch/arm/mach-shmobile/r8a7779.h
index 88eecea..5415c71 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/r8a7779.h
@@ -2,8 +2,6 @@
#define __ASM_R8A7779_H__
#include <linux/sh_clk.h>
-#include <linux/pm_domain.h>
-#include <mach/pm-rcar.h>
/* HPB-DMA slave IDs */
enum {
@@ -12,17 +10,6 @@
HPBDMA_SLAVE_SDHI0_RX,
};
-struct r8a7779_pm_domain {
- struct generic_pm_domain genpd;
- struct rcar_sysc_ch ch;
-};
-
-static inline struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d)
-{
- return &container_of(d, struct r8a7779_pm_domain, genpd)->ch;
-}
-
-extern void r8a7779_init_delay(void);
extern void r8a7779_init_irq_extpin(int irlm);
extern void r8a7779_init_irq_extpin_dt(int irlm);
extern void r8a7779_init_irq_dt(void);
@@ -32,6 +19,7 @@
extern void r8a7779_add_standard_devices(void);
extern void r8a7779_add_standard_devices_dt(void);
extern void r8a7779_init_late(void);
+extern u32 r8a7779_read_mode_pins(void);
extern void r8a7779_clock_init(void);
extern void r8a7779_pinmux_init(void);
extern void r8a7779_pm_init(void);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/r8a7790.h
similarity index 93%
rename from arch/arm/mach-shmobile/include/mach/r8a7790.h
rename to arch/arm/mach-shmobile/r8a7790.h
index 0b95bab..459827f 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/r8a7790.h
@@ -1,8 +1,6 @@
#ifndef __ASM_R8A7790_H__
#define __ASM_R8A7790_H__
-#include <mach/rcar-gen2.h>
-
/* DMA slave IDs */
enum {
RCAR_DMA_SLAVE_INVALID,
@@ -33,7 +31,6 @@
void r8a7790_clock_init(void);
void r8a7790_pinmux_init(void);
void r8a7790_pm_init(void);
-void r8a7790_init_early(void);
extern struct smp_operations r8a7790_smp_ops;
#endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/r8a7791.h
similarity index 90%
rename from arch/arm/mach-shmobile/include/mach/r8a7791.h
rename to arch/arm/mach-shmobile/r8a7791.h
index 664274c..86eae7b 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7791.h
+++ b/arch/arm/mach-shmobile/r8a7791.h
@@ -5,6 +5,7 @@
void r8a7791_add_dt_devices(void);
void r8a7791_clock_init(void);
void r8a7791_pinmux_init(void);
+void r8a7791_pm_init(void);
extern struct smp_operations r8a7791_smp_ops;
#endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/rcar-gen2.h b/arch/arm/mach-shmobile/rcar-gen2.h
similarity index 85%
rename from arch/arm/mach-shmobile/include/mach/rcar-gen2.h
rename to arch/arm/mach-shmobile/rcar-gen2.h
index 43f606e..ce53cb5 100644
--- a/arch/arm/mach-shmobile/include/mach/rcar-gen2.h
+++ b/arch/arm/mach-shmobile/rcar-gen2.h
@@ -4,5 +4,6 @@
void rcar_gen2_timer_init(void);
#define MD(nr) BIT(nr)
u32 rcar_gen2_read_mode_pins(void);
+void rcar_gen2_reserve(void);
#endif /* __ASM_RCAR_GEN2_H__ */
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index d953ff6..b06a9e8 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -16,14 +16,13 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/clk-provider.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <mach/common.h>
+#include <linux/mm.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include "common.h"
static struct map_desc emev2_io_desc[] __initdata = {
#ifdef CONFIG_SMP
@@ -42,17 +41,6 @@
iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
}
-static void __init emev2_init_delay(void)
-{
- shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
-}
-
-static void __init emev2_add_standard_devices_dt(void)
-{
- of_clk_init(NULL);
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
static const char *emev2_boards_compat_dt[] __initconst = {
"renesas,emev2",
NULL,
@@ -63,8 +51,7 @@
DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
.smp = smp_ops(emev2_smp_ops),
.map_io = emev2_map_io,
- .init_early = emev2_init_delay,
- .init_machine = emev2_add_standard_devices_dt,
+ .init_early = shmobile_init_delay,
.init_late = shmobile_init_late,
.dt_compat = emev2_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index 412e179..4a98b23 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -22,11 +22,13 @@
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/sh_timer.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r7s72100.h>
+
#include <asm/mach/arch.h>
+#include "common.h"
+#include "irqs.h"
+#include "r7s72100.h"
+
static struct resource mtu2_resources[] __initdata = {
DEFINE_RES_MEM(0xfcff0000, 0x400),
DEFINE_RES_IRQ_NAMED(gic_iid(139), "tgi0a"),
@@ -43,11 +45,6 @@
r7s72100_register_mtu2();
}
-void __init r7s72100_init_early(void)
-{
- shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */
-}
-
#ifdef CONFIG_USE_OF
static const char *r7s72100_boards_compat_dt[] __initdata = {
"renesas,r7s72100",
@@ -55,7 +52,7 @@
};
DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
- .init_early = r7s72100_init_early,
+ .init_early = shmobile_init_delay,
.dt_compat = r7s72100_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 9333770..f470b3cc 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -24,12 +24,14 @@
#include <linux/serial_sci.h>
#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
-#include <mach/common.h>
-#include <mach/dma-register.h>
-#include <mach/irqs.h>
-#include <mach/r8a73a4.h>
+
#include <asm/mach/arch.h>
+#include "common.h"
+#include "dma-register.h"
+#include "irqs.h"
+#include "r8a73a4.h"
+
static const struct resource pfc_resources[] = {
DEFINE_RES_MEM(0xe6050000, 0x9000),
};
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 35dec23..348af35 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -31,16 +31,18 @@
#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
#include <linux/platform_data/sh_ipmmu.h>
-#include <mach/dma-register.h>
-#include <mach/r8a7740.h>
-#include <mach/pm-rmobile.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
+
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "common.h"
+#include "dma-register.h"
+#include "irqs.h"
+#include "pm-rmobile.h"
+#include "r8a7740.h"
+
static struct map_desc r8a7740_io_desc[] __initdata = {
/*
* for CPGA/INTC/PFC
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index d311ef9..2ccc012 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -37,12 +37,14 @@
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
#include <linux/dma-mapping.h>
-#include <mach/irqs.h>
-#include <mach/r8a7778.h>
-#include <mach/common.h>
+
#include <asm/mach/arch.h>
#include <asm/hardware/cache-l2x0.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7778.h"
+
/* SCIF */
#define R8A7778_SCIF(index, baseaddr, irq) \
static struct plat_sci_port scif##index##_platform_data = { \
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index aba4ed6..8dbc407 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -40,15 +40,17 @@
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
#include <linux/pm_runtime.h>
-#include <mach/irqs.h>
-#include <mach/r8a7779.h>
-#include <mach/common.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/hardware/cache-l2x0.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7779.h"
+
static struct map_desc r8a7779_io_desc[] __initdata = {
/* 2M entity map for 0xf0000000 (MPCORE) */
{
@@ -640,16 +642,16 @@
}
static struct platform_device *r8a7779_devices_dt[] __initdata = {
+ &tmu0_device,
+};
+
+static struct platform_device *r8a7779_standard_devices[] __initdata = {
&scif0_device,
&scif1_device,
&scif2_device,
&scif3_device,
&scif4_device,
&scif5_device,
- &tmu0_device,
-};
-
-static struct platform_device *r8a7779_standard_devices[] __initdata = {
&i2c0_device,
&i2c1_device,
&i2c2_device,
@@ -674,16 +676,6 @@
r8a7779_register_hpb_dmae();
}
-/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
-void __init __weak r8a7779_register_twd(void) { }
-
-void __init r8a7779_earlytimer_init(void)
-{
- r8a7779_clock_init();
- r8a7779_register_twd();
- shmobile_earlytimer_init();
-}
-
void __init r8a7779_add_early_devices(void)
{
early_platform_add_devices(r8a7779_devices_dt,
@@ -747,19 +739,28 @@
__raw_writel(0x003fee3f, INT2SMSKCR4);
}
-void __init r8a7779_init_delay(void)
-{
- shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */
-}
-
void __init r8a7779_add_standard_devices_dt(void)
{
- /* clocks are setup late during boot in the case of DT */
- r8a7779_clock_init();
-
platform_add_devices(r8a7779_devices_dt,
ARRAY_SIZE(r8a7779_devices_dt));
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+#define MODEMR 0xffcc0020
+
+u32 __init r8a7779_read_mode_pins(void)
+{
+ static u32 mode;
+ static bool mode_valid;
+
+ if (!mode_valid) {
+ void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
+ BUG_ON(!modemr);
+ mode = ioread32(modemr);
+ iounmap(modemr);
+ mode_valid = true;
+ }
+
+ return mode;
}
static const char *r8a7779_compat_dt[] __initdata = {
@@ -769,7 +770,7 @@
DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)")
.map_io = r8a7779_map_io,
- .init_early = r8a7779_init_delay,
+ .init_early = shmobile_init_delay,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = r8a7779_init_irq_dt,
.init_machine = r8a7779_add_standard_devices_dt,
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 6bd08b1..c37d82d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -26,12 +26,15 @@
#include <linux/serial_sci.h>
#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
-#include <mach/common.h>
-#include <mach/dma-register.h>
-#include <mach/irqs.h>
-#include <mach/r8a7790.h>
+
#include <asm/mach/arch.h>
+#include "common.h"
+#include "dma-register.h"
+#include "irqs.h"
+#include "r8a7790.h"
+#include "rcar-gen2.h"
+
/* Audio-DMAC */
#define AUDIO_DMAC_SLAVE(_id, _addr, t, r) \
{ \
@@ -307,13 +310,6 @@
r8a7790_register_audio_dmac(1);
}
-void __init r8a7790_init_early(void)
-{
-#ifndef CONFIG_ARM_ARCH_TIMER
- shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
-#endif
-}
-
#ifdef CONFIG_USE_OF
static const char * const r8a7790_boards_compat_dt[] __initconst = {
@@ -323,8 +319,10 @@
DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
.smp = smp_ops(r8a7790_smp_ops),
- .init_early = r8a7790_init_early,
+ .init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
+ .init_late = shmobile_init_late,
+ .reserve = rcar_gen2_reserve,
.dt_compat = r8a7790_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 04a96dd..8823324 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -26,12 +26,14 @@
#include <linux/platform_data/irq-renesas-irqc.h>
#include <linux/serial_sci.h>
#include <linux/sh_timer.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a7791.h>
-#include <mach/rcar-gen2.h>
+
#include <asm/mach/arch.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7791.h"
+#include "rcar-gen2.h"
+
static const struct resource pfc_resources[] __initconst = {
DEFINE_RES_MEM(0xe6060000, 0x250),
};
@@ -217,6 +219,8 @@
.smp = smp_ops(r8a7791_smp_ops),
.init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
+ .init_late = shmobile_init_late,
+ .reserve = rcar_gen2_reserve,
.dt_compat = r8a7791_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 542c5a4..42d5b43 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -20,11 +20,14 @@
#include <linux/clk/shmobile.h>
#include <linux/clocksource.h>
+#include <linux/device.h>
+#include <linux/dma-contiguous.h>
#include <linux/io.h>
#include <linux/kernel.h>
-#include <mach/common.h>
-#include <mach/rcar-gen2.h>
+#include <linux/of_fdt.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "rcar-gen2.h"
#define MODEMR 0xe6160060
@@ -110,3 +113,72 @@
#endif
clocksource_of_init();
}
+
+struct memory_reserve_config {
+ u64 reserved;
+ u64 base, size;
+};
+
+static int __init rcar_gen2_scan_mem(unsigned long node, const char *uname,
+ int depth, void *data)
+{
+ const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+ const __be32 *reg, *endp;
+ int l;
+ struct memory_reserve_config *mrc = data;
+ u64 lpae_start = 1ULL << 32;
+
+ /* We are scanning "memory" nodes only */
+ if (type == NULL || strcmp(type, "memory"))
+ return 0;
+
+ reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);
+ if (reg == NULL)
+ reg = of_get_flat_dt_prop(node, "reg", &l);
+ if (reg == NULL)
+ return 0;
+
+ endp = reg + (l / sizeof(__be32));
+ while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
+ u64 base, size;
+
+ base = dt_mem_next_cell(dt_root_addr_cells, ®);
+ size = dt_mem_next_cell(dt_root_size_cells, ®);
+
+ if (base >= lpae_start)
+ continue;
+
+ if ((base + size) >= lpae_start)
+ size = lpae_start - base;
+
+ if (size < mrc->reserved)
+ continue;
+
+ if (base < mrc->base)
+ continue;
+
+ /* keep the area at top near the 32-bit legacy limit */
+ mrc->base = base + size - mrc->reserved;
+ mrc->size = mrc->reserved;
+ }
+
+ return 0;
+}
+
+struct cma *rcar_gen2_dma_contiguous;
+
+void __init rcar_gen2_reserve(void)
+{
+ struct memory_reserve_config mrc;
+
+ /* reserve 256 MiB at the top of the physical legacy 32-bit space */
+ memset(&mrc, 0, sizeof(mrc));
+ mrc.reserved = SZ_256M;
+
+ of_scan_flat_dt(rcar_gen2_scan_mem, &mrc);
+#ifdef CONFIG_DMA_CMA
+ if (mrc.size)
+ dma_contiguous_reserve_area(mrc.size, mrc.base, 0,
+ &rcar_gen2_dma_contiguous, true);
+#endif
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 2a8b9f2..9cdfcdf 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -29,20 +29,22 @@
#include <linux/io.h>
#include <linux/serial_sci.h>
#include <linux/sh_dma.h>
-#include <linux/sh_intc.h>
#include <linux/sh_timer.h>
#include <linux/pm_domain.h>
#include <linux/dma-mapping.h>
#include <linux/platform_data/sh_ipmmu.h>
-#include <mach/dma-register.h>
-#include <mach/irqs.h>
-#include <mach/sh7372.h>
-#include <mach/common.h>
+
#include <asm/mach/map.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "common.h"
+#include "dma-register.h"
+#include "irqs.h"
+#include "pm-rmobile.h"
+#include "sh7372.h"
+
static struct map_desc sh7372_io_desc[] __initdata = {
/* create a 1:1 entity map for 0xe6xxxxxx
* used by CPGA, INTC and PFC.
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index ad00724..2248821 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -29,19 +29,20 @@
#include <linux/io.h>
#include <linux/serial_sci.h>
#include <linux/sh_dma.h>
-#include <linux/sh_intc.h>
#include <linux/sh_timer.h>
#include <linux/platform_data/sh_ipmmu.h>
#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <mach/dma-register.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
+
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "common.h"
+#include "dma-register.h"
+#include "irqs.h"
+#include "sh73a0.h"
+
static struct map_desc sh73a0_io_desc[] __initdata = {
/* create a 1:1 entity map for 0xe6xxxxxx
* used by CPGA, INTC and PFC.
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/sh7372.h
similarity index 96%
rename from arch/arm/mach-shmobile/include/mach/sh7372.h
rename to arch/arm/mach-shmobile/sh7372.h
index 854a9f0..4ad960d 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/sh7372.h
@@ -11,10 +11,6 @@
#ifndef __ASM_SH7372_H__
#define __ASM_SH7372_H__
-#include <linux/sh_clk.h>
-#include <linux/pm_domain.h>
-#include <mach/pm-rmobile.h>
-
/* DMA slave IDs */
enum {
SHDMA_SLAVE_INVALID,
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/sh73a0.h
similarity index 100%
rename from arch/arm/mach-shmobile/include/mach/sh73a0.h
rename to arch/arm/mach-shmobile/sh73a0.h
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 2dfd748..6ff1df1 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -23,9 +23,9 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <mach/common.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
+#include "common.h"
#define EMEV2_SCU_BASE 0x1e000000
#define EMEV2_SMU_BASE 0xe0110000
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index e7a3201..3100e35 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -23,14 +23,16 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <mach/common.h>
-#include <mach/pm-rcar.h>
-#include <mach/r8a7779.h>
+
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
#include <asm/smp_twd.h>
+#include "common.h"
+#include "pm-rcar.h"
+#include "r8a7779.h"
+
#define AVECR IOMEM(0xfe700040)
#define R8A7779_SCU_BASE 0xf0000000
diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c
index 5910527..2311694 100644
--- a/arch/arm/mach-shmobile/smp-r8a7790.c
+++ b/arch/arm/mach-shmobile/smp-r8a7790.c
@@ -17,17 +17,12 @@
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <asm/smp_plat.h>
-#include <mach/common.h>
-#include <mach/pm-rcar.h>
-#include <mach/r8a7790.h>
-#define RST 0xe6160000
-#define CA15BAR 0x0020
-#define CA7BAR 0x0030
-#define CA15RESCNT 0x0040
-#define CA7RESCNT 0x0044
-#define MERAM 0xe8080000
+#include <asm/smp_plat.h>
+
+#include "common.h"
+#include "pm-rcar.h"
+#include "r8a7790.h"
static struct rcar_sysc_ch r8a7790_ca15_scu = {
.chan_offs = 0x180, /* PWRSR5 .. PWRER5 */
@@ -41,32 +36,9 @@
static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus)
{
- void __iomem *p;
- u32 bar;
-
/* let APMU code install data related to shmobile_boot_vector */
shmobile_smp_apmu_prepare_cpus(max_cpus);
- /* MERAM for jump stub, because BAR requires 256KB aligned address */
- p = ioremap_nocache(MERAM, shmobile_boot_size);
- memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
- iounmap(p);
-
- /* setup reset vectors */
- p = ioremap_nocache(RST, 0x63);
- bar = (MERAM >> 8) & 0xfffffc00;
- writel_relaxed(bar, p + CA15BAR);
- writel_relaxed(bar, p + CA7BAR);
- writel_relaxed(bar | 0x10, p + CA15BAR);
- writel_relaxed(bar | 0x10, p + CA7BAR);
-
- /* enable clocks to all CPUs */
- writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
- p + CA15RESCNT);
- writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000,
- p + CA7RESCNT);
- iounmap(p);
-
/* turn on power to SCU */
r8a7790_pm_init();
rcar_sysc_power_up(&r8a7790_ca15_scu);
diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c
index ec97952..f743386 100644
--- a/arch/arm/mach-shmobile/smp-r8a7791.c
+++ b/arch/arm/mach-shmobile/smp-r8a7791.c
@@ -17,39 +17,19 @@
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <asm/smp_plat.h>
-#include <mach/common.h>
-#include <mach/r8a7791.h>
-#include <mach/rcar-gen2.h>
-#define RST 0xe6160000
-#define CA15BAR 0x0020
-#define CA15RESCNT 0x0040
-#define RAM 0xe6300000
+#include <asm/smp_plat.h>
+
+#include "common.h"
+#include "r8a7791.h"
+#include "rcar-gen2.h"
static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus)
{
- void __iomem *p;
- u32 bar;
-
/* let APMU code install data related to shmobile_boot_vector */
shmobile_smp_apmu_prepare_cpus(max_cpus);
- /* RAM for jump stub, because BAR requires 256KB aligned address */
- p = ioremap_nocache(RAM, shmobile_boot_size);
- memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
- iounmap(p);
-
- /* setup reset vectors */
- p = ioremap_nocache(RST, 0x63);
- bar = (RAM >> 8) & 0xfffffc00;
- writel_relaxed(bar, p + CA15BAR);
- writel_relaxed(bar | 0x10, p + CA15BAR);
-
- /* enable clocks to all CPUs */
- writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
- p + CA15RESCNT);
- iounmap(p);
+ r8a7791_pm_init();
}
static int r8a7791_smp_boot_secondary(unsigned int cpu,
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 13ba36a..22d8f87 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -22,11 +22,13 @@
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <mach/common.h>
-#include <mach/sh73a0.h>
+
#include <asm/smp_plat.h>
#include <asm/smp_twd.h>
+#include "common.h"
+#include "sh73a0.h"
+
#define WUPCR IOMEM(0xe6151010)
#define SRESCR IOMEM(0xe6151018)
#define PSTR IOMEM(0xe6151040)
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 68bc0b8..942efdc 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -59,29 +59,37 @@
void __init shmobile_init_delay(void)
{
- struct device_node *np, *parent;
- u32 max_freq, freq;
+ struct device_node *np, *cpus;
+ bool is_a8_a9 = false;
+ bool is_a15 = false;
+ u32 max_freq = 0;
- max_freq = 0;
+ cpus = of_find_node_by_path("/cpus");
+ if (!cpus)
+ return;
- parent = of_find_node_by_path("/cpus");
- if (parent) {
- for_each_child_of_node(parent, np) {
- if (!of_property_read_u32(np, "clock-frequency", &freq))
- max_freq = max(max_freq, freq);
- }
- of_node_put(parent);
+ for_each_child_of_node(cpus, np) {
+ u32 freq;
+
+ if (!of_property_read_u32(np, "clock-frequency", &freq))
+ max_freq = max(max_freq, freq);
+
+ if (of_device_is_compatible(np, "arm,cortex-a8") ||
+ of_device_is_compatible(np, "arm,cortex-a9"))
+ is_a8_a9 = true;
+ else if (of_device_is_compatible(np, "arm,cortex-a15"))
+ is_a15 = true;
}
- if (max_freq) {
- if (of_find_compatible_node(NULL, NULL, "arm,cortex-a8"))
- shmobile_setup_delay_hz(max_freq, 1, 3);
- else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
- shmobile_setup_delay_hz(max_freq, 1, 3);
- else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a15"))
- if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
- shmobile_setup_delay_hz(max_freq, 2, 4);
- }
+ of_node_put(cpus);
+
+ if (!max_freq)
+ return;
+
+ if (is_a8_a9)
+ shmobile_setup_delay_hz(max_freq, 1, 3);
+ else if (is_a15 && !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
+ shmobile_setup_delay_hz(max_freq, 2, 4);
}
static void __init shmobile_late_time_init(void)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 0fbd4f1..6434e3b 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -35,4 +35,12 @@
select HAVE_ARM_ARCH_TIMER
select SUN5I_HSTIMER
+config MACH_SUN8I
+ bool "Allwinner A23 (sun8i) SoCs support"
+ default ARCH_SUNXI
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARM_GIC
+ select MFD_SUN6I_PRCM
+ select RESET_CONTROLLER
+
endif
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index b608508..42d4753 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -130,3 +130,12 @@
.dt_compat = sun7i_board_dt_compat,
.restart = sun4i_restart,
MACHINE_END
+
+static const char * const sun8i_board_dt_compat[] = {
+ "allwinner,sun8i-a23",
+ NULL,
+};
+
+DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i (A23) Family")
+ .dt_compat = sun8i_board_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index 3621b00..9f9bc61 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -44,7 +44,6 @@
DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
.map_io = versatile_map_io,
.init_early = versatile_init_early,
- .init_irq = versatile_init_irq,
.init_machine = versatile_dt_init,
.dt_compat = versatile_dt_match,
.restart = versatile_restart,
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c348eae..c35f0ec 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -854,7 +854,7 @@
config CACHE_FEROCEON_L2
bool "Enable the Feroceon L2 cache controller"
- depends on ARCH_KIRKWOOD || ARCH_MV78XX0 || ARCH_MVEBU
+ depends on ARCH_MV78XX0 || ARCH_MVEBU
default y
select OUTER_CACHE
help
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index b5608b1..7aae0e5 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2100,7 +2100,7 @@
omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
DMA_DEFAULT_FIFO_DEPTH, 0);
- if (dma_omap2plus()) {
+ if (dma_omap2plus() && !(d->dev_caps & DMA_ENGINE_HANDLE_IRQ)) {
strcpy(irq_name, "0");
dma_irq = platform_get_irq_byname(pdev, irq_name);
if (dma_irq < 0) {
@@ -2145,7 +2145,8 @@
char irq_name[4];
strcpy(irq_name, "0");
dma_irq = platform_get_irq_byname(pdev, irq_name);
- remove_irq(dma_irq, &omap24xx_dma_irq);
+ if (dma_irq >= 0)
+ remove_irq(dma_irq, &omap24xx_dma_irq);
} else {
int irq_rel = 0;
for ( ; irq_rel < dma_chan_count; irq_rel++) {
diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h
index c186786..f5b9d3f 100644
--- a/arch/arm/plat-samsung/include/plat/map-s5p.h
+++ b/arch/arm/plat-samsung/include/plat/map-s5p.h
@@ -15,7 +15,6 @@
#define S5P_VA_CHIPID S3C_ADDR(0x02000000)
#define S5P_VA_CMU S3C_ADDR(0x02100000)
-#define S5P_VA_PMU S3C_ADDR(0x02180000)
#define S5P_VA_GPIO S3C_ADDR(0x02200000)
#define S5P_VA_GPIO1 S5P_VA_GPIO
#define S5P_VA_GPIO2 S3C_ADDR(0x02240000)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index a474de34..839f48c 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -4,6 +4,7 @@
select ARCH_HAS_OPP
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_USE_CMPXCHG_LOCKREF
+ select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
select ARCH_WANT_FRAME_POINTERS
diff --git a/arch/arm64/kernel/efi-stub.c b/arch/arm64/kernel/efi-stub.c
index 60e98a63..e786e6c 100644
--- a/arch/arm64/kernel/efi-stub.c
+++ b/arch/arm64/kernel/efi-stub.c
@@ -12,8 +12,6 @@
#include <linux/efi.h>
#include <linux/libfdt.h>
#include <asm/sections.h>
-#include <generated/compile.h>
-#include <generated/utsrelease.h>
/*
* AArch64 requires the DTB to be 8-byte aligned in the first 512MiB from
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index fefe7c8..80b94b0 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -145,6 +145,7 @@
select HAVE_IRQ_EXIT_ON_IRQ_STACK
select ARCH_USE_CMPXCHG_LOCKREF if PPC64
select HAVE_ARCH_AUDITSYSCALL
+ select ARCH_SUPPORTS_ATOMIC_RMW
config GENERIC_CSUM
def_bool CPU_LITTLE_ENDIAN
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 51a3ff7..1007fb8 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -747,7 +747,7 @@
#ifdef CONFIG_SCHED_SMT
/* cpumask of CPUs with asymetric SMT dependancy */
-static const int powerpc_smt_flags(void)
+static int powerpc_smt_flags(void)
{
int flags = SD_SHARE_CPUCAPACITY | SD_SHARE_PKG_RESOURCES;
diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
index 6dcdade..82e82ca 100644
--- a/arch/powerpc/net/bpf_jit_comp.c
+++ b/arch/powerpc/net/bpf_jit_comp.c
@@ -390,12 +390,16 @@
case BPF_ANC | SKF_AD_VLAN_TAG:
case BPF_ANC | SKF_AD_VLAN_TAG_PRESENT:
BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, vlan_tci) != 2);
+ BUILD_BUG_ON(VLAN_TAG_PRESENT != 0x1000);
+
PPC_LHZ_OFFS(r_A, r_skb, offsetof(struct sk_buff,
vlan_tci));
- if (code == (BPF_ANC | SKF_AD_VLAN_TAG))
- PPC_ANDI(r_A, r_A, VLAN_VID_MASK);
- else
+ if (code == (BPF_ANC | SKF_AD_VLAN_TAG)) {
+ PPC_ANDI(r_A, r_A, ~VLAN_TAG_PRESENT);
+ } else {
PPC_ANDI(r_A, r_A, VLAN_TAG_PRESENT);
+ PPC_SRWI(r_A, r_A, 12);
+ }
break;
case BPF_ANC | SKF_AD_QUEUE:
BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 29f2e98..407c87d 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -78,6 +78,7 @@
select HAVE_C_RECORDMCOUNT
select NO_BOOTMEM
select HAVE_ARCH_AUDITSYSCALL
+ select ARCH_SUPPORTS_ATOMIC_RMW
config ARCH_DEFCONFIG
string
diff --git a/arch/um/kernel/tlb.c b/arch/um/kernel/tlb.c
index 9472079..f1b3eb1 100644
--- a/arch/um/kernel/tlb.c
+++ b/arch/um/kernel/tlb.c
@@ -12,6 +12,7 @@
#include <mem_user.h>
#include <os.h>
#include <skas.h>
+#include <kern_util.h>
struct host_vm_change {
struct host_vm_op {
@@ -124,6 +125,9 @@
struct host_vm_op *last;
int ret = 0;
+ if ((addr >= STUB_START) && (addr < STUB_END))
+ return -EINVAL;
+
if (hvc->index != 0) {
last = &hvc->ops[hvc->index - 1];
if ((last->type == MUNMAP) &&
@@ -283,8 +287,11 @@
/* This is not an else because ret is modified above */
if (ret) {
printk(KERN_ERR "fix_range_common: failed, killing current "
- "process\n");
+ "process: %d\n", task_tgid_vnr(current));
+ /* We are under mmap_sem, release it such that current can terminate */
+ up_write(¤t->mm->mmap_sem);
force_sig(SIGKILL, current);
+ do_signal();
}
}
diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c
index 974b874..5678c35 100644
--- a/arch/um/kernel/trap.c
+++ b/arch/um/kernel/trap.c
@@ -206,7 +206,7 @@
int is_write = FAULT_WRITE(fi);
unsigned long address = FAULT_ADDRESS(fi);
- if (regs)
+ if (!is_user && regs)
current->thread.segv_regs = container_of(regs, struct pt_regs, regs);
if (!is_user && (address >= start_vm) && (address < end_vm)) {
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index d531879..908579f 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -54,7 +54,7 @@
void wait_stub_done(int pid)
{
- int n, status, err, bad_stop = 0;
+ int n, status, err;
while (1) {
CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL));
@@ -74,8 +74,6 @@
if (((1 << WSTOPSIG(status)) & STUB_DONE_MASK) != 0)
return;
- else
- bad_stop = 1;
bad_wait:
err = ptrace_dump_regs(pid);
@@ -85,10 +83,7 @@
printk(UM_KERN_ERR "wait_stub_done : failed to wait for SIGTRAP, "
"pid = %d, n = %d, errno = %d, status = 0x%x\n", pid, n, errno,
status);
- if (bad_stop)
- kill(pid, SIGKILL);
- else
- fatal_sigsegv();
+ fatal_sigsegv();
}
extern unsigned long current_stub_stack(void);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a8f749e..d24887b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -131,6 +131,7 @@
select HAVE_CC_STACKPROTECTOR
select GENERIC_CPU_AUTOPROBE
select HAVE_ARCH_AUDITSYSCALL
+ select ARCH_SUPPORTS_ATOMIC_RMW
config INSTRUCTION_DECODER
def_bool y
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 84c2234..7a6d43a 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -91,10 +91,9 @@
.section ".bsdata", "a"
bugger_off_msg:
- .ascii "Direct floppy boot is not supported. "
- .ascii "Use a boot loader program instead.\r\n"
+ .ascii "Use a boot loader.\r\n"
.ascii "\n"
- .ascii "Remove disk and press any key to reboot ...\r\n"
+ .ascii "Remove disk and press any key to reboot...\r\n"
.byte 0
#ifdef CONFIG_EFI_STUB
@@ -108,7 +107,7 @@
#else
.word 0x8664 # x86-64
#endif
- .word 3 # nr_sections
+ .word 4 # nr_sections
.long 0 # TimeDateStamp
.long 0 # PointerToSymbolTable
.long 1 # NumberOfSymbols
@@ -250,6 +249,25 @@
.word 0 # NumberOfLineNumbers
.long 0x60500020 # Characteristics (section flags)
+ #
+ # The offset & size fields are filled in by build.c.
+ #
+ .ascii ".bss"
+ .byte 0
+ .byte 0
+ .byte 0
+ .byte 0
+ .long 0
+ .long 0x0
+ .long 0 # Size of initialized data
+ # on disk
+ .long 0x0
+ .long 0 # PointerToRelocations
+ .long 0 # PointerToLineNumbers
+ .word 0 # NumberOfRelocations
+ .word 0 # NumberOfLineNumbers
+ .long 0xc8000080 # Characteristics (section flags)
+
#endif /* CONFIG_EFI_STUB */
# Kernel attributes; used by setup. This is part 1 of the
diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c
index 1a2f212..a7661c4 100644
--- a/arch/x86/boot/tools/build.c
+++ b/arch/x86/boot/tools/build.c
@@ -143,7 +143,7 @@
#ifdef CONFIG_EFI_STUB
-static void update_pecoff_section_header(char *section_name, u32 offset, u32 size)
+static void update_pecoff_section_header_fields(char *section_name, u32 vma, u32 size, u32 datasz, u32 offset)
{
unsigned int pe_header;
unsigned short num_sections;
@@ -164,10 +164,10 @@
put_unaligned_le32(size, section + 0x8);
/* section header vma field */
- put_unaligned_le32(offset, section + 0xc);
+ put_unaligned_le32(vma, section + 0xc);
/* section header 'size of initialised data' field */
- put_unaligned_le32(size, section + 0x10);
+ put_unaligned_le32(datasz, section + 0x10);
/* section header 'file offset' field */
put_unaligned_le32(offset, section + 0x14);
@@ -179,6 +179,11 @@
}
}
+static void update_pecoff_section_header(char *section_name, u32 offset, u32 size)
+{
+ update_pecoff_section_header_fields(section_name, offset, size, size, offset);
+}
+
static void update_pecoff_setup_and_reloc(unsigned int size)
{
u32 setup_offset = 0x200;
@@ -203,9 +208,6 @@
pe_header = get_unaligned_le32(&buf[0x3c]);
- /* Size of image */
- put_unaligned_le32(file_sz, &buf[pe_header + 0x50]);
-
/*
* Size of code: Subtract the size of the first sector (512 bytes)
* which includes the header.
@@ -220,6 +222,22 @@
update_pecoff_section_header(".text", text_start, text_sz);
}
+static void update_pecoff_bss(unsigned int file_sz, unsigned int init_sz)
+{
+ unsigned int pe_header;
+ unsigned int bss_sz = init_sz - file_sz;
+
+ pe_header = get_unaligned_le32(&buf[0x3c]);
+
+ /* Size of uninitialized data */
+ put_unaligned_le32(bss_sz, &buf[pe_header + 0x24]);
+
+ /* Size of image */
+ put_unaligned_le32(init_sz, &buf[pe_header + 0x50]);
+
+ update_pecoff_section_header_fields(".bss", file_sz, bss_sz, 0, 0);
+}
+
static int reserve_pecoff_reloc_section(int c)
{
/* Reserve 0x20 bytes for .reloc section */
@@ -259,6 +277,8 @@
static inline void update_pecoff_setup_and_reloc(unsigned int size) {}
static inline void update_pecoff_text(unsigned int text_start,
unsigned int file_sz) {}
+static inline void update_pecoff_bss(unsigned int file_sz,
+ unsigned int init_sz) {}
static inline void efi_stub_defaults(void) {}
static inline void efi_stub_entry_update(void) {}
@@ -310,7 +330,7 @@
int main(int argc, char ** argv)
{
- unsigned int i, sz, setup_sectors;
+ unsigned int i, sz, setup_sectors, init_sz;
int c;
u32 sys_size;
struct stat sb;
@@ -376,7 +396,9 @@
buf[0x1f1] = setup_sectors-1;
put_unaligned_le32(sys_size, &buf[0x1f4]);
- update_pecoff_text(setup_sectors * 512, sz + i + ((sys_size * 16) - sz));
+ update_pecoff_text(setup_sectors * 512, i + (sys_size * 16));
+ init_sz = get_unaligned_le32(&buf[0x260]);
+ update_pecoff_bss(i + (sys_size * 16), init_sz);
efi_stub_entry_update();
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index f3a1f04..5848744 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -841,7 +841,6 @@
u32 eax;
u8 ret = 0;
int idled = 0;
- int polling;
int err = 0;
if (!need_resched()) {
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index adb02aa..07846d7 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -1382,6 +1382,15 @@
intel_pmu_lbr_read();
/*
+ * CondChgd bit 63 doesn't mean any overflow status. Ignore
+ * and clear the bit.
+ */
+ if (__test_and_clear_bit(63, (unsigned long *)&status)) {
+ if (!status)
+ goto done;
+ }
+
+ /*
* PEBS overflow sets bit 62 in the global status register
*/
if (__test_and_clear_bit(62, (unsigned long *)&status)) {
diff --git a/arch/x86/kernel/espfix_64.c b/arch/x86/kernel/espfix_64.c
index 6afbb16..94d857f 100644
--- a/arch/x86/kernel/espfix_64.c
+++ b/arch/x86/kernel/espfix_64.c
@@ -175,7 +175,7 @@
if (!pud_present(pud)) {
pmd_p = (pmd_t *)__get_free_page(PGALLOC_GFP);
pud = __pud(__pa(pmd_p) | (PGTABLE_PROT & ptemask));
- paravirt_alloc_pud(&init_mm, __pa(pmd_p) >> PAGE_SHIFT);
+ paravirt_alloc_pmd(&init_mm, __pa(pmd_p) >> PAGE_SHIFT);
for (n = 0; n < ESPFIX_PUD_CLONES; n++)
set_pud(&pud_p[n], pud);
}
@@ -185,7 +185,7 @@
if (!pmd_present(pmd)) {
pte_p = (pte_t *)__get_free_page(PGALLOC_GFP);
pmd = __pmd(__pa(pte_p) | (PGTABLE_PROT & ptemask));
- paravirt_alloc_pmd(&init_mm, __pa(pte_p) >> PAGE_SHIFT);
+ paravirt_alloc_pte(&init_mm, __pa(pte_p) >> PAGE_SHIFT);
for (n = 0; n < ESPFIX_PMD_CLONES; n++)
set_pmd(&pmd_p[n], pmd);
}
@@ -193,7 +193,6 @@
pte_p = pte_offset_kernel(&pmd, addr);
stack_page = (void *)__get_free_page(GFP_KERNEL);
pte = __pte(__pa(stack_page) | (__PAGE_KERNEL_RO & ptemask));
- paravirt_alloc_pte(&init_mm, __pa(stack_page) >> PAGE_SHIFT);
for (n = 0; n < ESPFIX_PTE_CLONES; n++)
set_pte(&pte_p[n*PTE_STRIDE], pte);
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 57e5ce1..ea03031 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -920,9 +920,9 @@
tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new);
if (!(freq->flags & CPUFREQ_CONST_LOOPS))
mark_tsc_unstable("cpufreq changes");
- }
- set_cyc2ns_scale(tsc_khz, freq->cpu);
+ set_cyc2ns_scale(tsc_khz, freq->cpu);
+ }
return 0;
}
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 071c1df..350d52a 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -68,7 +68,7 @@
MODULE_DESCRIPTION("ACPI Video Driver");
MODULE_LICENSE("GPL");
-static bool brightness_switch_enabled;
+static bool brightness_switch_enabled = 1;
module_param(brightness_switch_enabled, bool, 0644);
/*
@@ -581,6 +581,14 @@
},
{
.callback = video_set_use_native_backlight,
+ .ident = "HP ProBook 4540s",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "HP ProBook 4540s"),
+ },
+ },
+ {
+ .callback = video_set_use_native_backlight,
.ident = "HP ProBook 2013 models",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 9e9227e..eee48c4 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -89,8 +89,13 @@
return dev->archdata.irqs[num];
#else
struct resource *r;
- if (IS_ENABLED(CONFIG_OF_IRQ) && dev->dev.of_node)
- return of_irq_get(dev->dev.of_node, num);
+ if (IS_ENABLED(CONFIG_OF_IRQ) && dev->dev.of_node) {
+ int ret;
+
+ ret = of_irq_get(dev->dev.of_node, num);
+ if (ret >= 0 || ret == -EPROBE_DEFER)
+ return ret;
+ }
r = platform_get_resource(dev, IORESOURCE_IRQ, num);
@@ -133,8 +138,13 @@
{
struct resource *r;
- if (IS_ENABLED(CONFIG_OF_IRQ) && dev->dev.of_node)
- return of_irq_get_byname(dev->dev.of_node, name);
+ if (IS_ENABLED(CONFIG_OF_IRQ) && dev->dev.of_node) {
+ int ret;
+
+ ret = of_irq_get_byname(dev->dev.of_node, name);
+ if (ret >= 0 || ret == -EPROBE_DEFER)
+ return ret;
+ }
r = platform_get_resource_byname(dev, IORESOURCE_IRQ, name);
return r ? r->start : -ENXIO;
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index f983806..f50dffc 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -90,7 +90,6 @@
{ USB_DEVICE(0x0b05, 0x17d0) },
{ USB_DEVICE(0x0CF3, 0x0036) },
{ USB_DEVICE(0x0CF3, 0x3004) },
- { USB_DEVICE(0x0CF3, 0x3005) },
{ USB_DEVICE(0x0CF3, 0x3008) },
{ USB_DEVICE(0x0CF3, 0x311D) },
{ USB_DEVICE(0x0CF3, 0x311E) },
@@ -140,7 +139,6 @@
{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
- { USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a1c80b0..6250fc2 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -162,7 +162,6 @@
{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
- { USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 04680ea..fede8ca 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -406,6 +406,7 @@
H5_HDR_PKT_TYPE(hdr) != HCI_3WIRE_LINK_PKT) {
BT_ERR("Non-link packet received in non-active state");
h5_reset_rx(h5);
+ return 0;
}
h5->rx_func = h5_rx_payload;
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
index f8ee13c7..75c9681 100644
--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -162,7 +162,9 @@
}
}
- ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+ ret = of_platform_populate(pdev->dev.of_node,
+ of_default_bus_match_table,
+ NULL, &pdev->dev);
if (ret)
dev_err(&pdev->dev, "%s fail to create devices.\n",
pdev->dev.of_node->full_name);
diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c
index 334601c..c4419ea 100644
--- a/drivers/char/hw_random/core.c
+++ b/drivers/char/hw_random/core.c
@@ -55,16 +55,41 @@
static int data_avail;
static u8 *rng_buffer;
+static inline int rng_get_data(struct hwrng *rng, u8 *buffer, size_t size,
+ int wait);
+
static size_t rng_buffer_size(void)
{
return SMP_CACHE_BYTES < 32 ? 32 : SMP_CACHE_BYTES;
}
+static void add_early_randomness(struct hwrng *rng)
+{
+ unsigned char bytes[16];
+ int bytes_read;
+
+ /*
+ * Currently only virtio-rng cannot return data during device
+ * probe, and that's handled in virtio-rng.c itself. If there
+ * are more such devices, this call to rng_get_data can be
+ * made conditional here instead of doing it per-device.
+ */
+ bytes_read = rng_get_data(rng, bytes, sizeof(bytes), 1);
+ if (bytes_read > 0)
+ add_device_randomness(bytes, bytes_read);
+}
+
static inline int hwrng_init(struct hwrng *rng)
{
- if (!rng->init)
- return 0;
- return rng->init(rng);
+ if (rng->init) {
+ int ret;
+
+ ret = rng->init(rng);
+ if (ret)
+ return ret;
+ }
+ add_early_randomness(rng);
+ return 0;
}
static inline void hwrng_cleanup(struct hwrng *rng)
@@ -304,8 +329,6 @@
{
int err = -EINVAL;
struct hwrng *old_rng, *tmp;
- unsigned char bytes[16];
- int bytes_read;
if (rng->name == NULL ||
(rng->data_read == NULL && rng->read == NULL))
@@ -347,9 +370,17 @@
INIT_LIST_HEAD(&rng->list);
list_add_tail(&rng->list, &rng_list);
- bytes_read = rng_get_data(rng, bytes, sizeof(bytes), 1);
- if (bytes_read > 0)
- add_device_randomness(bytes, bytes_read);
+ if (old_rng && !rng->init) {
+ /*
+ * Use a new device's input to add some randomness to
+ * the system. If this rng device isn't going to be
+ * used right away, its init function hasn't been
+ * called yet; so only use the randomness from devices
+ * that don't need an init callback.
+ */
+ add_early_randomness(rng);
+ }
+
out_unlock:
mutex_unlock(&rng_mutex);
out:
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index f3e7150..e9b15bc 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -38,6 +38,8 @@
int index;
};
+static bool probe_done;
+
static void random_recv_done(struct virtqueue *vq)
{
struct virtrng_info *vi = vq->vdev->priv;
@@ -67,6 +69,13 @@
int ret;
struct virtrng_info *vi = (struct virtrng_info *)rng->priv;
+ /*
+ * Don't ask host for data till we're setup. This call can
+ * happen during hwrng_register(), after commit d9e7972619.
+ */
+ if (unlikely(!probe_done))
+ return 0;
+
if (!vi->busy) {
vi->busy = true;
init_completion(&vi->have_data);
@@ -137,6 +146,7 @@
return err;
}
+ probe_done = true;
return 0;
}
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 0a7ac0a..71529e1 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -641,7 +641,7 @@
} while (unlikely(entropy_count < pool_size-2 && pnfrac));
}
- if (entropy_count < 0) {
+ if (unlikely(entropy_count < 0)) {
pr_warn("random: negative entropy/overflow: pool %s count %d\n",
r->name, entropy_count);
WARN_ON(1);
@@ -981,7 +981,7 @@
int reserved)
{
int entropy_count, orig;
- size_t ibytes;
+ size_t ibytes, nfrac;
BUG_ON(r->entropy_count > r->poolinfo->poolfracbits);
@@ -999,7 +999,17 @@
}
if (ibytes < min)
ibytes = 0;
- if ((entropy_count -= ibytes << (ENTROPY_SHIFT + 3)) < 0)
+
+ if (unlikely(entropy_count < 0)) {
+ pr_warn("random: negative entropy count: pool %s count %d\n",
+ r->name, entropy_count);
+ WARN_ON(1);
+ entropy_count = 0;
+ }
+ nfrac = ibytes << (ENTROPY_SHIFT + 3);
+ if ((size_t) entropy_count > nfrac)
+ entropy_count -= nfrac;
+ else
entropy_count = 0;
if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig)
@@ -1376,6 +1386,7 @@
"with %d bits of entropy available\n",
current->comm, nonblocking_pool.entropy_total);
+ nbytes = min_t(size_t, nbytes, INT_MAX >> (ENTROPY_SHIFT + 3));
ret = extract_entropy_user(&nonblocking_pool, buf, nbytes);
trace_urandom_read(8 * nbytes, ENTROPY_BITS(&nonblocking_pool),
diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
index fd449f9..162e519 100644
--- a/drivers/clk/versatile/Makefile
+++ b/drivers/clk/versatile/Makefile
@@ -1,6 +1,5 @@
# Makefile for Versatile-specific clocks
-obj-$(CONFIG_ICST) += clk-icst.o
-obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o
+obj-$(CONFIG_ICST) += clk-icst.o clk-versatile.o
obj-$(CONFIG_INTEGRATOR_IMPD1) += clk-impd1.o
obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o
obj-$(CONFIG_ARCH_VEXPRESS) += clk-vexpress.o
diff --git a/drivers/clk/versatile/clk-integrator.c b/drivers/clk/versatile/clk-versatile.c
similarity index 63%
rename from drivers/clk/versatile/clk-integrator.c
rename to drivers/clk/versatile/clk-versatile.c
index 734c4b8..a76981e 100644
--- a/drivers/clk/versatile/clk-integrator.c
+++ b/drivers/clk/versatile/clk-versatile.c
@@ -1,5 +1,6 @@
/*
- * Clock driver for the ARM Integrator/AP and Integrator/CP boards
+ * Clock driver for the ARM Integrator/AP, Integrator/CP, Versatile AB and
+ * Versatile PB boards.
* Copyright (C) 2012 Linus Walleij
*
* This program is free software; you can redistribute it and/or modify
@@ -17,6 +18,9 @@
#define INTEGRATOR_HDR_LOCK_OFFSET 0x14
+#define VERSATILE_SYS_OSCCLCD_OFFSET 0x1c
+#define VERSATILE_SYS_LOCK_OFFSET 0x20
+
/* Base offset for the core module */
static void __iomem *cm_base;
@@ -37,11 +41,27 @@
.lock_offset = INTEGRATOR_HDR_LOCK_OFFSET,
};
-static void __init of_integrator_cm_osc_setup(struct device_node *np)
+static const struct icst_params versatile_auxosc_params = {
+ .vco_max = ICST307_VCO_MAX,
+ .vco_min = ICST307_VCO_MIN,
+ .vd_min = 4 + 8,
+ .vd_max = 511 + 8,
+ .rd_min = 1 + 2,
+ .rd_max = 127 + 2,
+ .s2div = icst307_s2div,
+ .idx2s = icst307_idx2s,
+};
+
+static const struct clk_icst_desc versatile_auxosc_desc __initconst = {
+ .params = &versatile_auxosc_params,
+ .vco_offset = VERSATILE_SYS_OSCCLCD_OFFSET,
+ .lock_offset = VERSATILE_SYS_LOCK_OFFSET,
+};
+static void __init cm_osc_setup(struct device_node *np,
+ const struct clk_icst_desc *desc)
{
struct clk *clk = ERR_PTR(-EINVAL);
const char *clk_name = np->name;
- const struct clk_icst_desc *desc = &cm_auxosc_desc;
const char *parent_name;
if (!cm_base) {
@@ -65,5 +85,17 @@
if (!IS_ERR(clk))
of_clk_add_provider(np, of_clk_src_simple_get, clk);
}
+
+static void __init of_integrator_cm_osc_setup(struct device_node *np)
+{
+ cm_osc_setup(np, &cm_auxosc_desc);
+}
CLK_OF_DECLARE(integrator_cm_auxosc_clk,
"arm,integrator-cm-auxosc", of_integrator_cm_osc_setup);
+
+static void __init of_versatile_cm_osc_setup(struct device_node *np)
+{
+ cm_osc_setup(np, &versatile_auxosc_desc);
+}
+CLK_OF_DECLARE(versatile_cm_auxosc_clk,
+ "arm,versatile-cm-auxosc", of_versatile_cm_osc_setup);
diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c
index d1869f0..d2616ef 100644
--- a/drivers/clocksource/tegra20_timer.c
+++ b/drivers/clocksource/tegra20_timer.c
@@ -27,6 +27,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/sched_clock.h>
+#include <linux/delay.h>
#include <asm/mach/time.h>
#include <asm/smp_twd.h>
@@ -53,6 +54,8 @@
static struct timespec persistent_ts;
static u64 persistent_ms, last_persistent_ms;
+static struct delay_timer tegra_delay_timer;
+
#define timer_writel(value, reg) \
__raw_writel(value, timer_reg_base + (reg))
#define timer_readl(reg) \
@@ -139,6 +142,11 @@
*ts = *tsp;
}
+static unsigned long tegra_delay_timer_read_counter_long(void)
+{
+ return readl(timer_reg_base + TIMERUS_CNTR_1US);
+}
+
static irqreturn_t tegra_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = (struct clock_event_device *)dev_id;
@@ -206,6 +214,11 @@
BUG();
}
+ tegra_delay_timer.read_current_timer =
+ tegra_delay_timer_read_counter_long;
+ tegra_delay_timer.freq = 1000000;
+ register_current_timer_delay(&tegra_delay_timer);
+
ret = setup_irq(tegra_timer_irq.irq, &tegra_timer_irq);
if (ret) {
pr_err("Failed to register timer IRQ: %d\n", ret);
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index ebac671..7364a53 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -104,6 +104,7 @@
tristate "Freescale i.MX6 cpufreq support"
depends on ARCH_MXC
depends on REGULATOR_ANATOP
+ select PM_OPP
help
This adds cpufreq driver support for Freescale i.MX6 series SoCs.
@@ -118,7 +119,7 @@
If in doubt, say Y.
config ARM_KIRKWOOD_CPUFREQ
- def_bool MACH_KIRKWOOD
+ def_bool ARCH_KIRKWOOD || MACH_KIRKWOOD
help
This adds the CPUFreq driver for Marvell Kirkwood
SoCs.
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index ee1ae30..86beda9 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -152,11 +152,8 @@
goto out_put_reg;
}
- ret = of_init_opp_table(cpu_dev);
- if (ret) {
- pr_err("failed to init OPP table: %d\n", ret);
- goto out_put_clk;
- }
+ /* OPPs might be populated at runtime, don't check for error here */
+ of_init_opp_table(cpu_dev);
ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
if (ret) {
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 62259d2..6f02485 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1153,10 +1153,12 @@
* the creation of a brand new one. So we need to perform this update
* by invoking update_policy_cpu().
*/
- if (recover_policy && cpu != policy->cpu)
+ if (recover_policy && cpu != policy->cpu) {
update_policy_cpu(policy, cpu);
- else
+ WARN_ON(kobject_move(&policy->kobj, &dev->kobj));
+ } else {
policy->cpu = cpu;
+ }
cpumask_copy(policy->cpus, cpumask_of(cpu));
diff --git a/drivers/cpufreq/sa1110-cpufreq.c b/drivers/cpufreq/sa1110-cpufreq.c
index 5463767..b5befc2 100644
--- a/drivers/cpufreq/sa1110-cpufreq.c
+++ b/drivers/cpufreq/sa1110-cpufreq.c
@@ -349,7 +349,7 @@
name = "K4S641632D";
if (machine_is_h3100())
name = "KM416S4030CT";
- if (machine_is_jornada720())
+ if (machine_is_jornada720() || machine_is_h3600())
name = "K4S281632B-1H";
if (machine_is_nanoengine())
name = "MT48LC8M16A2TG-75";
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index b6d69e8..2f6b33e 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -9,7 +9,7 @@
config ARM_BIG_LITTLE_CPUIDLE
bool "Support for ARM big.LITTLE processors"
- depends on ARCH_VEXPRESS_TC2_PM
+ depends on ARCH_VEXPRESS_TC2_PM || ARCH_EXYNOS
select ARM_CPU_SUSPEND
select CPU_IDLE_MULTIPLE_DRIVERS
help
diff --git a/drivers/cpuidle/cpuidle-big_little.c b/drivers/cpuidle/cpuidle-big_little.c
index b45fc62..344d79fa 100644
--- a/drivers/cpuidle/cpuidle-big_little.c
+++ b/drivers/cpuidle/cpuidle-big_little.c
@@ -163,14 +163,24 @@
return 0;
}
+static const struct of_device_id compatible_machine_match[] = {
+ { .compatible = "arm,vexpress,v2p-ca15_a7" },
+ { .compatible = "samsung,exynos5420" },
+ {},
+};
+
static int __init bl_idle_init(void)
{
int ret;
+ struct device_node *root = of_find_node_by_path("/");
+
+ if (!root)
+ return -ENODEV;
/*
* Initialize the driver just for a compliant set of machines
*/
- if (!of_machine_is_compatible("arm,vexpress,v2p-ca15_a7"))
+ if (!of_match_node(compatible_machine_match, root))
return -ENODEV;
/*
* For now the differentiation between little and big cores
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
index 4199849..145974f 100644
--- a/drivers/firewire/Kconfig
+++ b/drivers/firewire/Kconfig
@@ -1,4 +1,5 @@
menu "IEEE 1394 (FireWire) support"
+ depends on HAS_DMA
depends on PCI || COMPILE_TEST
# firewire-core does not depend on PCI but is
# not useful without PCI controller driver
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index eff1a2f..dc793466 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -346,6 +346,7 @@
struct param_info {
int verbose;
+ int found;
void *params;
};
@@ -362,16 +363,12 @@
(strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
return 0;
- pr_info("Getting parameters from FDT:\n");
-
for (i = 0; i < ARRAY_SIZE(dt_params); i++) {
prop = of_get_flat_dt_prop(node, dt_params[i].propname, &len);
- if (!prop) {
- pr_err("Can't find %s in device tree!\n",
- dt_params[i].name);
+ if (!prop)
return 0;
- }
dest = info->params + dt_params[i].offset;
+ info->found++;
val = of_read_number(prop, len / sizeof(u32));
@@ -390,10 +387,21 @@
int __init efi_get_fdt_params(struct efi_fdt_params *params, int verbose)
{
struct param_info info;
+ int ret;
+
+ pr_info("Getting EFI parameters from FDT:\n");
info.verbose = verbose;
+ info.found = 0;
info.params = params;
- return of_scan_flat_dt(fdt_find_uefi_params, &info);
+ ret = of_scan_flat_dt(fdt_find_uefi_params, &info);
+ if (!info.found)
+ pr_info("UEFI not found.\n");
+ else if (!ret)
+ pr_err("Can't find '%s' in device tree!\n",
+ dt_params[info.found].name);
+
+ return ret;
}
#endif /* CONFIG_EFI_PARAMS_FROM_FDT */
diff --git a/drivers/firmware/efi/fdt.c b/drivers/firmware/efi/fdt.c
index 82d7741..507a3df 100644
--- a/drivers/firmware/efi/fdt.c
+++ b/drivers/firmware/efi/fdt.c
@@ -23,16 +23,6 @@
u32 fdt_val32;
u64 fdt_val64;
- /*
- * Copy definition of linux_banner here. Since this code is
- * built as part of the decompressor for ARM v7, pulling
- * in version.c where linux_banner is defined for the
- * kernel brings other kernel dependencies with it.
- */
- const char linux_banner[] =
- "Linux version " UTS_RELEASE " (" LINUX_COMPILE_BY "@"
- LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION "\n";
-
/* Do some checks on provided FDT, if it exists*/
if (orig_fdt) {
if (fdt_check_header(orig_fdt)) {
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index fe7c0e2..57adbc9 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -900,8 +900,6 @@
if (spi_present_mask & (1 << addr))
chips++;
}
- if (!chips)
- return -ENODEV;
} else {
type = spi_get_device_id(spi)->driver_data;
pdata = dev_get_platdata(&spi->dev);
@@ -940,10 +938,6 @@
if (!(spi_present_mask & (1 << addr)))
continue;
chips--;
- if (chips < 0) {
- dev_err(&spi->dev, "FATAL: invalid negative chip id\n");
- goto fail;
- }
data->mcp[addr] = &data->chip[chips];
status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi,
0x40 | (addr << 1), type, base,
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e27e780..f0be855 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -11673,6 +11673,9 @@
/* Toshiba CB35 Chromebook (Celeron 2955U) */
{ 0x0a06, 0x1179, 0x0a88, quirk_backlight_present },
+
+ /* HP Chromebook 14 (Celeron 2955U) */
+ { 0x0a06, 0x103c, 0x21ed, quirk_backlight_present },
};
static void intel_init_quirks(struct drm_device *dev)
@@ -11911,6 +11914,7 @@
* ... */
plane = crtc->plane;
crtc->plane = !plane;
+ crtc->primary_enabled = true;
dev_priv->display.crtc_disable(&crtc->base);
crtc->plane = plane;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 075170d..8a1a4fb 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -906,8 +906,8 @@
mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock,
bpp);
- for (lane_count = min_lane_count; lane_count <= max_lane_count; lane_count <<= 1) {
- for (clock = min_clock; clock <= max_clock; clock++) {
+ for (clock = min_clock; clock <= max_clock; clock++) {
+ for (lane_count = min_lane_count; lane_count <= max_lane_count; lane_count <<= 1) {
link_clock = drm_dp_bw_code_to_link_rate(bws[clock]);
link_avail = intel_dp_max_data_rate(link_clock,
lane_count);
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 2312602..5e5a72f 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -111,6 +111,13 @@
pipe_config->adjusted_mode.flags |= flags;
+ /* gen2/3 store dither state in pfit control, needs to match */
+ if (INTEL_INFO(dev)->gen < 4) {
+ tmp = I915_READ(PFIT_CONTROL);
+
+ pipe_config->gmch_pfit.control |= tmp & PANEL_8TO6_DITHER_ENABLE;
+ }
+
dotclock = pipe_config->port_clock;
if (HAS_PCH_SPLIT(dev_priv->dev))
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 628cd89..12b02fe 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -361,16 +361,16 @@
pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) |
PFIT_FILTER_FUZZY);
- /* Make sure pre-965 set dither correctly for 18bpp panels. */
- if (INTEL_INFO(dev)->gen < 4 && pipe_config->pipe_bpp == 18)
- pfit_control |= PANEL_8TO6_DITHER_ENABLE;
-
out:
if ((pfit_control & PFIT_ENABLE) == 0) {
pfit_control = 0;
pfit_pgm_ratios = 0;
}
+ /* Make sure pre-965 set dither correctly for 18bpp panels. */
+ if (INTEL_INFO(dev)->gen < 4 && pipe_config->pipe_bpp == 18)
+ pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+
pipe_config->gmch_pfit.control = pfit_control;
pipe_config->gmch_pfit.pgm_ratios = pfit_pgm_ratios;
pipe_config->gmch_pfit.lvds_border_bits = border;
diff --git a/drivers/gpu/drm/nouveau/core/subdev/therm/temp.c b/drivers/gpu/drm/nouveau/core/subdev/therm/temp.c
index cfde9eb..6212537 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/therm/temp.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/therm/temp.c
@@ -192,11 +192,11 @@
nouveau_therm_threshold_hyst_polling(therm, &sensor->thrs_shutdown,
NOUVEAU_THERM_THRS_SHUTDOWN);
+ spin_unlock_irqrestore(&priv->sensor.alarm_program_lock, flags);
+
/* schedule the next poll in one second */
if (therm->temp_get(therm) >= 0 && list_empty(&alarm->head))
- ptimer->alarm(ptimer, 1000 * 1000 * 1000, alarm);
-
- spin_unlock_irqrestore(&priv->sensor.alarm_program_lock, flags);
+ ptimer->alarm(ptimer, 1000000000ULL, alarm);
}
void
diff --git a/drivers/gpu/drm/qxl/qxl_irq.c b/drivers/gpu/drm/qxl/qxl_irq.c
index 34d6a85..0bf1e20 100644
--- a/drivers/gpu/drm/qxl/qxl_irq.c
+++ b/drivers/gpu/drm/qxl/qxl_irq.c
@@ -33,6 +33,9 @@
pending = xchg(&qdev->ram_header->int_pending, 0);
+ if (!pending)
+ return IRQ_NONE;
+
atomic_inc(&qdev->irq_received);
if (pending & QXL_INTERRUPT_DISPLAY) {
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index a03c734..30d242b 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1414,8 +1414,8 @@
tmp &= ~EVERGREEN_GRPH_SURFACE_UPDATE_H_RETRACE_EN;
WREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp);
- /* set pageflip to happen anywhere in vblank interval */
- WREG32(EVERGREEN_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0);
+ /* set pageflip to happen only at start of vblank interval (front porch) */
+ WREG32(EVERGREEN_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 3);
if (!atomic && fb && fb != crtc->primary->fb) {
radeon_fb = to_radeon_framebuffer(fb);
@@ -1614,8 +1614,8 @@
tmp &= ~AVIVO_D1GRPH_SURFACE_UPDATE_H_RETRACE_EN;
WREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp);
- /* set pageflip to happen anywhere in vblank interval */
- WREG32(AVIVO_D1MODE_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0);
+ /* set pageflip to happen only at start of vblank interval (front porch) */
+ WREG32(AVIVO_D1MODE_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 3);
if (!atomic && fb && fb != crtc->primary->fb) {
radeon_fb = to_radeon_framebuffer(fb);
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
index 2b29084..7d68203 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -183,7 +183,6 @@
struct backlight_properties props;
struct radeon_backlight_privdata *pdata;
struct radeon_encoder_atom_dig *dig;
- u8 backlight_level;
char bl_name[16];
/* Mac laptops with multiple GPUs use the gmux driver for backlight
@@ -222,12 +221,17 @@
pdata->encoder = radeon_encoder;
- backlight_level = radeon_atom_get_backlight_level_from_reg(rdev);
-
dig = radeon_encoder->enc_priv;
dig->bl_dev = bd;
bd->props.brightness = radeon_atom_backlight_get_brightness(bd);
+ /* Set a reasonable default here if the level is 0 otherwise
+ * fbdev will attempt to turn the backlight on after console
+ * unblanking and it will try and restore 0 which turns the backlight
+ * off again.
+ */
+ if (bd->props.brightness == 0)
+ bd->props.brightness = RADEON_MAX_BL_LEVEL;
bd->props.power = FB_BLANK_UNBLANK;
backlight_update_status(bd);
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index f7ece0f..250bac3 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -2642,8 +2642,9 @@
for (i = 0; i < rdev->num_crtc; i++) {
if (save->crtc_enabled[i]) {
tmp = RREG32(EVERGREEN_MASTER_UPDATE_MODE + crtc_offsets[i]);
- if ((tmp & 0x3) != 0) {
- tmp &= ~0x3;
+ if ((tmp & 0x7) != 3) {
+ tmp &= ~0x7;
+ tmp |= 0x3;
WREG32(EVERGREEN_MASTER_UPDATE_MODE + crtc_offsets[i], tmp);
}
tmp = RREG32(EVERGREEN_GRPH_UPDATE + crtc_offsets[i]);
diff --git a/drivers/gpu/drm/radeon/evergreen_reg.h b/drivers/gpu/drm/radeon/evergreen_reg.h
index 333d143..23bff59 100644
--- a/drivers/gpu/drm/radeon/evergreen_reg.h
+++ b/drivers/gpu/drm/radeon/evergreen_reg.h
@@ -239,7 +239,6 @@
# define EVERGREEN_CRTC_V_BLANK (1 << 0)
#define EVERGREEN_CRTC_STATUS_POSITION 0x6e90
#define EVERGREEN_CRTC_STATUS_HV_COUNT 0x6ea0
-#define EVERGREEN_MASTER_UPDATE_MODE 0x6ef8
#define EVERGREEN_CRTC_UPDATE_LOCK 0x6ed4
#define EVERGREEN_MASTER_UPDATE_LOCK 0x6ef4
#define EVERGREEN_MASTER_UPDATE_MODE 0x6ef8
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 29d9cc0..b720450 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -684,10 +684,9 @@
struct work_struct unpin_work;
struct radeon_device *rdev;
int crtc_id;
- struct drm_framebuffer *fb;
+ uint64_t base;
struct drm_pending_vblank_event *event;
struct radeon_bo *old_rbo;
- struct radeon_bo *new_rbo;
struct radeon_fence *fence;
};
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 13896ed..bf25061 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -366,7 +366,6 @@
spin_unlock_irqrestore(&rdev->ddev->event_lock, flags);
drm_vblank_put(rdev->ddev, radeon_crtc->crtc_id);
- radeon_fence_unref(&work->fence);
radeon_irq_kms_pflip_irq_put(rdev, work->crtc_id);
queue_work(radeon_crtc->flip_queue, &work->unpin_work);
}
@@ -386,51 +385,108 @@
struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[work->crtc_id];
struct drm_crtc *crtc = &radeon_crtc->base;
- struct drm_framebuffer *fb = work->fb;
-
- uint32_t tiling_flags, pitch_pixels;
- uint64_t base;
-
unsigned long flags;
int r;
down_read(&rdev->exclusive_lock);
- while (work->fence) {
+ if (work->fence) {
r = radeon_fence_wait(work->fence, false);
if (r == -EDEADLK) {
up_read(&rdev->exclusive_lock);
r = radeon_gpu_reset(rdev);
down_read(&rdev->exclusive_lock);
}
+ if (r)
+ DRM_ERROR("failed to wait on page flip fence (%d)!\n", r);
- if (r) {
- DRM_ERROR("failed to wait on page flip fence (%d)!\n",
- r);
- goto cleanup;
- } else
- radeon_fence_unref(&work->fence);
+ /* We continue with the page flip even if we failed to wait on
+ * the fence, otherwise the DRM core and userspace will be
+ * confused about which BO the CRTC is scanning out
+ */
+
+ radeon_fence_unref(&work->fence);
}
- /* pin the new buffer */
- DRM_DEBUG_DRIVER("flip-ioctl() cur_fbo = %p, cur_bbo = %p\n",
- work->old_rbo, work->new_rbo);
+ /* We borrow the event spin lock for protecting flip_status */
+ spin_lock_irqsave(&crtc->dev->event_lock, flags);
- r = radeon_bo_reserve(work->new_rbo, false);
+ /* set the proper interrupt */
+ radeon_irq_kms_pflip_irq_get(rdev, radeon_crtc->crtc_id);
+
+ /* do the flip (mmio) */
+ radeon_page_flip(rdev, radeon_crtc->crtc_id, work->base);
+
+ radeon_crtc->flip_status = RADEON_FLIP_SUBMITTED;
+ spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
+ up_read(&rdev->exclusive_lock);
+}
+
+static int radeon_crtc_page_flip(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_pending_vblank_event *event,
+ uint32_t page_flip_flags)
+{
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ struct radeon_framebuffer *old_radeon_fb;
+ struct radeon_framebuffer *new_radeon_fb;
+ struct drm_gem_object *obj;
+ struct radeon_flip_work *work;
+ struct radeon_bo *new_rbo;
+ uint32_t tiling_flags, pitch_pixels;
+ uint64_t base;
+ unsigned long flags;
+ int r;
+
+ work = kzalloc(sizeof *work, GFP_KERNEL);
+ if (work == NULL)
+ return -ENOMEM;
+
+ INIT_WORK(&work->flip_work, radeon_flip_work_func);
+ INIT_WORK(&work->unpin_work, radeon_unpin_work_func);
+
+ work->rdev = rdev;
+ work->crtc_id = radeon_crtc->crtc_id;
+ work->event = event;
+
+ /* schedule unpin of the old buffer */
+ old_radeon_fb = to_radeon_framebuffer(crtc->primary->fb);
+ obj = old_radeon_fb->obj;
+
+ /* take a reference to the old object */
+ drm_gem_object_reference(obj);
+ work->old_rbo = gem_to_radeon_bo(obj);
+
+ new_radeon_fb = to_radeon_framebuffer(fb);
+ obj = new_radeon_fb->obj;
+ new_rbo = gem_to_radeon_bo(obj);
+
+ spin_lock(&new_rbo->tbo.bdev->fence_lock);
+ if (new_rbo->tbo.sync_obj)
+ work->fence = radeon_fence_ref(new_rbo->tbo.sync_obj);
+ spin_unlock(&new_rbo->tbo.bdev->fence_lock);
+
+ /* pin the new buffer */
+ DRM_DEBUG_DRIVER("flip-ioctl() cur_rbo = %p, new_rbo = %p\n",
+ work->old_rbo, new_rbo);
+
+ r = radeon_bo_reserve(new_rbo, false);
if (unlikely(r != 0)) {
DRM_ERROR("failed to reserve new rbo buffer before flip\n");
goto cleanup;
}
/* Only 27 bit offset for legacy CRTC */
- r = radeon_bo_pin_restricted(work->new_rbo, RADEON_GEM_DOMAIN_VRAM,
+ r = radeon_bo_pin_restricted(new_rbo, RADEON_GEM_DOMAIN_VRAM,
ASIC_IS_AVIVO(rdev) ? 0 : 1 << 27, &base);
if (unlikely(r != 0)) {
- radeon_bo_unreserve(work->new_rbo);
+ radeon_bo_unreserve(new_rbo);
r = -EINVAL;
DRM_ERROR("failed to pin new rbo buffer before flip\n");
goto cleanup;
}
- radeon_bo_get_tiling_flags(work->new_rbo, &tiling_flags, NULL);
- radeon_bo_unreserve(work->new_rbo);
+ radeon_bo_get_tiling_flags(new_rbo, &tiling_flags, NULL);
+ radeon_bo_unreserve(new_rbo);
if (!ASIC_IS_AVIVO(rdev)) {
/* crtc offset is from display base addr not FB location */
@@ -467,6 +523,7 @@
}
base &= ~7;
}
+ work->base = base;
r = drm_vblank_get(crtc->dev, radeon_crtc->crtc_id);
if (r) {
@@ -477,88 +534,11 @@
/* We borrow the event spin lock for protecting flip_work */
spin_lock_irqsave(&crtc->dev->event_lock, flags);
- /* set the proper interrupt */
- radeon_irq_kms_pflip_irq_get(rdev, radeon_crtc->crtc_id);
-
- /* do the flip (mmio) */
- radeon_page_flip(rdev, radeon_crtc->crtc_id, base);
-
- radeon_crtc->flip_status = RADEON_FLIP_SUBMITTED;
- spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
- up_read(&rdev->exclusive_lock);
-
- return;
-
-pflip_cleanup:
- if (unlikely(radeon_bo_reserve(work->new_rbo, false) != 0)) {
- DRM_ERROR("failed to reserve new rbo in error path\n");
- goto cleanup;
- }
- if (unlikely(radeon_bo_unpin(work->new_rbo) != 0)) {
- DRM_ERROR("failed to unpin new rbo in error path\n");
- }
- radeon_bo_unreserve(work->new_rbo);
-
-cleanup:
- drm_gem_object_unreference_unlocked(&work->old_rbo->gem_base);
- radeon_fence_unref(&work->fence);
- kfree(work);
- up_read(&rdev->exclusive_lock);
-}
-
-static int radeon_crtc_page_flip(struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- struct drm_pending_vblank_event *event,
- uint32_t page_flip_flags)
-{
- struct drm_device *dev = crtc->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
- struct radeon_framebuffer *old_radeon_fb;
- struct radeon_framebuffer *new_radeon_fb;
- struct drm_gem_object *obj;
- struct radeon_flip_work *work;
- unsigned long flags;
-
- work = kzalloc(sizeof *work, GFP_KERNEL);
- if (work == NULL)
- return -ENOMEM;
-
- INIT_WORK(&work->flip_work, radeon_flip_work_func);
- INIT_WORK(&work->unpin_work, radeon_unpin_work_func);
-
- work->rdev = rdev;
- work->crtc_id = radeon_crtc->crtc_id;
- work->fb = fb;
- work->event = event;
-
- /* schedule unpin of the old buffer */
- old_radeon_fb = to_radeon_framebuffer(crtc->primary->fb);
- obj = old_radeon_fb->obj;
-
- /* take a reference to the old object */
- drm_gem_object_reference(obj);
- work->old_rbo = gem_to_radeon_bo(obj);
-
- new_radeon_fb = to_radeon_framebuffer(fb);
- obj = new_radeon_fb->obj;
- work->new_rbo = gem_to_radeon_bo(obj);
-
- spin_lock(&work->new_rbo->tbo.bdev->fence_lock);
- if (work->new_rbo->tbo.sync_obj)
- work->fence = radeon_fence_ref(work->new_rbo->tbo.sync_obj);
- spin_unlock(&work->new_rbo->tbo.bdev->fence_lock);
-
- /* We borrow the event spin lock for protecting flip_work */
- spin_lock_irqsave(&crtc->dev->event_lock, flags);
-
if (radeon_crtc->flip_status != RADEON_FLIP_NONE) {
DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
- drm_gem_object_unreference_unlocked(&work->old_rbo->gem_base);
- radeon_fence_unref(&work->fence);
- kfree(work);
- return -EBUSY;
+ r = -EBUSY;
+ goto vblank_cleanup;
}
radeon_crtc->flip_status = RADEON_FLIP_PENDING;
radeon_crtc->flip_work = work;
@@ -569,8 +549,27 @@
spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
queue_work(radeon_crtc->flip_queue, &work->flip_work);
-
return 0;
+
+vblank_cleanup:
+ drm_vblank_put(crtc->dev, radeon_crtc->crtc_id);
+
+pflip_cleanup:
+ if (unlikely(radeon_bo_reserve(new_rbo, false) != 0)) {
+ DRM_ERROR("failed to reserve new rbo in error path\n");
+ goto cleanup;
+ }
+ if (unlikely(radeon_bo_unpin(new_rbo) != 0)) {
+ DRM_ERROR("failed to unpin new rbo in error path\n");
+ }
+ radeon_bo_unreserve(new_rbo);
+
+cleanup:
+ drm_gem_object_unreference_unlocked(&work->old_rbo->gem_base);
+ radeon_fence_unref(&work->fence);
+ kfree(work);
+
+ return r;
}
static int
@@ -830,6 +829,10 @@
struct radeon_device *rdev = dev->dev_private;
int ret = 0;
+ /* don't leak the edid if we already fetched it in detect() */
+ if (radeon_connector->edid)
+ goto got_edid;
+
/* on hw with routers, select right port */
if (radeon_connector->router.ddc_valid)
radeon_router_select_ddc_port(radeon_connector);
@@ -868,6 +871,7 @@
radeon_connector->edid = radeon_bios_get_hardcoded_edid(rdev);
}
if (radeon_connector->edid) {
+got_edid:
drm_mode_connector_update_edid_property(&radeon_connector->base, radeon_connector->edid);
ret = drm_add_edid_modes(&radeon_connector->base, radeon_connector->edid);
drm_edid_to_eld(&radeon_connector->base, radeon_connector->edid);
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 237dd29..3e21e86 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -406,8 +406,9 @@
for (i = 0; i < rdev->num_crtc; i++) {
if (save->crtc_enabled[i]) {
tmp = RREG32(AVIVO_D1MODE_MASTER_UPDATE_MODE + crtc_offsets[i]);
- if ((tmp & 0x3) != 0) {
- tmp &= ~0x3;
+ if ((tmp & 0x7) != 3) {
+ tmp &= ~0x7;
+ tmp |= 0x3;
WREG32(AVIVO_D1MODE_MASTER_UPDATE_MODE + crtc_offsets[i], tmp);
}
tmp = RREG32(AVIVO_D1GRPH_UPDATE + crtc_offsets[i]);
diff --git a/drivers/hv/hv_fcopy.c b/drivers/hv/hv_fcopy.c
index eaaa3d8..23b2ce2 100644
--- a/drivers/hv/hv_fcopy.c
+++ b/drivers/hv/hv_fcopy.c
@@ -246,8 +246,8 @@
/*
* Send the information to the user-level daemon.
*/
- fcopy_send_data();
schedule_delayed_work(&fcopy_work, 5*HZ);
+ fcopy_send_data();
return;
}
icmsghdr->icflags = ICMSGHDRFLAG_TRANSACTION | ICMSGHDRFLAG_RESPONSE;
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 0f4dea5..9ee3913 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -515,7 +515,7 @@
return -EINVAL;
temp = DIV_ROUND_CLOSEST(temp, 1000);
- temp = clamp_val(temp, 0, 255);
+ temp = clamp_val(temp, -128, 127);
mutex_lock(&data->lock);
data->temp_min[attr->index] = temp;
@@ -549,7 +549,7 @@
return -EINVAL;
temp = DIV_ROUND_CLOSEST(temp, 1000);
- temp = clamp_val(temp, 0, 255);
+ temp = clamp_val(temp, -128, 127);
mutex_lock(&data->lock);
data->temp_max[attr->index] = temp;
@@ -826,7 +826,7 @@
return -EINVAL;
temp = DIV_ROUND_CLOSEST(temp, 1000);
- temp = clamp_val(temp, 0, 255);
+ temp = clamp_val(temp, -128, 127);
mutex_lock(&data->lock);
data->pwm_tmin[attr->index] = temp;
diff --git a/drivers/hwmon/da9052-hwmon.c b/drivers/hwmon/da9052-hwmon.c
index afd3104..d14ab3c 100644
--- a/drivers/hwmon/da9052-hwmon.c
+++ b/drivers/hwmon/da9052-hwmon.c
@@ -194,7 +194,7 @@
struct device_attribute *devattr,
char *buf)
{
- return sprintf(buf, "da9052-hwmon\n");
+ return sprintf(buf, "da9052\n");
}
static ssize_t show_label(struct device *dev,
diff --git a/drivers/hwmon/da9055-hwmon.c b/drivers/hwmon/da9055-hwmon.c
index 73b3865..35eb773 100644
--- a/drivers/hwmon/da9055-hwmon.c
+++ b/drivers/hwmon/da9055-hwmon.c
@@ -204,7 +204,7 @@
struct device_attribute *devattr,
char *buf)
{
- return sprintf(buf, "da9055-hwmon\n");
+ return sprintf(buf, "da9055\n");
}
static ssize_t show_label(struct device *dev,
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 17aeea1..2a5fa9a 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -111,8 +111,14 @@
{6, 250000}, {1, 560000}
};
+/*
+ * Hardware has fullscale of -2G, -4G, -8G corresponding to raw value -2048
+ * The userspace interface uses m/s^2 and we declare micro units
+ * So scale factor is given by:
+ * g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665
+ */
static const int mma8452_scales[3][2] = {
- {0, 977}, {0, 1953}, {0, 3906}
+ {0, 9577}, {0, 19154}, {0, 38307}
};
static ssize_t mma8452_show_samp_freq_avail(struct device *dev,
diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c
index 258a973..bfbf4d4 100644
--- a/drivers/iio/industrialio-event.c
+++ b/drivers/iio/industrialio-event.c
@@ -345,6 +345,9 @@
&indio_dev->event_interface->dev_attr_list);
kfree(postfix);
+ if ((ret == -EBUSY) && (shared_by != IIO_SEPARATE))
+ continue;
+
if (ret)
return ret;
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 5e153f6..768a0fb 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -432,8 +432,17 @@
*/
static void act_open_req_arp_failure(void *handle, struct sk_buff *skb)
{
+ struct c4iw_ep *ep = handle;
+
printk(KERN_ERR MOD "ARP failure duing connect\n");
kfree_skb(skb);
+ connect_reply_upcall(ep, -EHOSTUNREACH);
+ state_set(&ep->com, DEAD);
+ remove_handle(ep->com.dev, &ep->com.dev->atid_idr, ep->atid);
+ cxgb4_free_atid(ep->com.dev->rdev.lldi.tids, ep->atid);
+ dst_release(ep->dst);
+ cxgb4_l2t_release(ep->l2t);
+ c4iw_put_ep(&ep->com);
}
/*
@@ -658,7 +667,7 @@
opt2 |= T5_OPT_2_VALID;
opt2 |= V_CONG_CNTRL(CONG_ALG_TAHOE);
}
- t4_set_arp_err_handler(skb, NULL, act_open_req_arp_failure);
+ t4_set_arp_err_handler(skb, ep, act_open_req_arp_failure);
if (is_t4(ep->com.dev->rdev.lldi.adapter_type)) {
if (ep->com.remote_addr.ss_family == AF_INET) {
@@ -2180,7 +2189,6 @@
PDBG("%s c4iw_dev %p tid %u\n", __func__, dev, hwtid);
BUG_ON(skb_cloned(skb));
skb_trim(skb, sizeof(struct cpl_tid_release));
- skb_get(skb);
release_tid(&dev->rdev, hwtid, skb);
return;
}
@@ -3917,7 +3925,7 @@
return 0;
}
-void __exit c4iw_cm_term(void)
+void c4iw_cm_term(void)
{
WARN_ON(!list_empty(&timeout_list));
flush_workqueue(workq);
diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c
index dd93aad..7db82b2 100644
--- a/drivers/infiniband/hw/cxgb4/device.c
+++ b/drivers/infiniband/hw/cxgb4/device.c
@@ -696,6 +696,7 @@
pr_err(MOD "error allocating status page\n");
goto err4;
}
+ rdev->status_page->db_off = 0;
return 0;
err4:
c4iw_rqtpool_destroy(rdev);
@@ -729,7 +730,6 @@
if (ctx->dev->rdev.oc_mw_kva)
iounmap(ctx->dev->rdev.oc_mw_kva);
ib_dealloc_device(&ctx->dev->ibdev);
- iwpm_exit(RDMA_NL_C4IW);
ctx->dev = NULL;
}
@@ -826,12 +826,6 @@
setup_debugfs(devp);
}
- ret = iwpm_init(RDMA_NL_C4IW);
- if (ret) {
- pr_err("port mapper initialization failed with %d\n", ret);
- ib_dealloc_device(&devp->ibdev);
- return ERR_PTR(ret);
- }
return devp;
}
@@ -1332,6 +1326,15 @@
pr_err("%s[%u]: Failed to add netlink callback\n"
, __func__, __LINE__);
+ err = iwpm_init(RDMA_NL_C4IW);
+ if (err) {
+ pr_err("port mapper initialization failed with %d\n", err);
+ ibnl_remove_client(RDMA_NL_C4IW);
+ c4iw_cm_term();
+ debugfs_remove_recursive(c4iw_debugfs_root);
+ return err;
+ }
+
cxgb4_register_uld(CXGB4_ULD_RDMA, &c4iw_uld_info);
return 0;
@@ -1349,6 +1352,7 @@
}
mutex_unlock(&dev_mutex);
cxgb4_unregister_uld(CXGB4_ULD_RDMA);
+ iwpm_exit(RDMA_NL_C4IW);
ibnl_remove_client(RDMA_NL_C4IW);
c4iw_cm_term();
debugfs_remove_recursive(c4iw_debugfs_root);
diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
index 125bc5d..361fff7 100644
--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
+++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
@@ -908,7 +908,7 @@
int c4iw_register_device(struct c4iw_dev *dev);
void c4iw_unregister_device(struct c4iw_dev *dev);
int __init c4iw_cm_init(void);
-void __exit c4iw_cm_term(void);
+void c4iw_cm_term(void);
void c4iw_release_dev_ucontext(struct c4iw_rdev *rdev,
struct c4iw_dev_ucontext *uctx);
void c4iw_init_dev_ucontext(struct c4iw_rdev *rdev,
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index d13ddf1..bbbcf38 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -675,7 +675,7 @@
int err;
uuari = &dev->mdev.priv.uuari;
- if (init_attr->create_flags & ~IB_QP_CREATE_SIGNATURE_EN)
+ if (init_attr->create_flags & ~(IB_QP_CREATE_SIGNATURE_EN | IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK))
return -EINVAL;
if (init_attr->qp_type == MLX5_IB_QPT_REG_UMR)
diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
index b99dd88..bb446d7 100644
--- a/drivers/iommu/fsl_pamu.c
+++ b/drivers/iommu/fsl_pamu.c
@@ -170,10 +170,10 @@
static unsigned int map_addrspace_size_to_wse(phys_addr_t addrspace_size)
{
/* Bug if not a power of 2 */
- BUG_ON(!is_power_of_2(addrspace_size));
+ BUG_ON((addrspace_size & (addrspace_size - 1)));
/* window size is 2^(WSE+1) bytes */
- return __ffs(addrspace_size) - 1;
+ return fls64(addrspace_size) - 2;
}
/* Derive the PAACE window count encoding for the subwindow count */
@@ -351,7 +351,7 @@
struct paace *ppaace;
unsigned long fspi;
- if (!is_power_of_2(win_size) || win_size < PAMU_PAGE_SIZE) {
+ if ((win_size & (win_size - 1)) || win_size < PAMU_PAGE_SIZE) {
pr_debug("window size too small or not a power of two %llx\n", win_size);
return -EINVAL;
}
@@ -464,7 +464,7 @@
return -ENOENT;
}
- if (!is_power_of_2(subwin_size) || subwin_size < PAMU_PAGE_SIZE) {
+ if ((subwin_size & (subwin_size - 1)) || subwin_size < PAMU_PAGE_SIZE) {
pr_debug("subwindow size out of range, or not a power of 2\n");
return -EINVAL;
}
diff --git a/drivers/iommu/fsl_pamu_domain.c b/drivers/iommu/fsl_pamu_domain.c
index 93072ba..af47648 100644
--- a/drivers/iommu/fsl_pamu_domain.c
+++ b/drivers/iommu/fsl_pamu_domain.c
@@ -301,7 +301,7 @@
* Size must be a power of two and at least be equal
* to PAMU page size.
*/
- if (!is_power_of_2(size) || size < PAMU_PAGE_SIZE) {
+ if ((size & (size - 1)) || size < PAMU_PAGE_SIZE) {
pr_debug("%s: size too small or not a power of two\n", __func__);
return -EINVAL;
}
@@ -335,11 +335,6 @@
return domain;
}
-static inline struct device_domain_info *find_domain(struct device *dev)
-{
- return dev->archdata.iommu_domain;
-}
-
static void remove_device_ref(struct device_domain_info *info, u32 win_cnt)
{
unsigned long flags;
@@ -380,7 +375,7 @@
* Check here if the device is already attached to domain or not.
* If the device is already attached to a domain detach it.
*/
- old_domain_info = find_domain(dev);
+ old_domain_info = dev->archdata.iommu_domain;
if (old_domain_info && old_domain_info->domain != dma_domain) {
spin_unlock_irqrestore(&device_domain_lock, flags);
detach_device(dev, old_domain_info->domain);
@@ -399,7 +394,7 @@
* the info for the first LIODN as all
* LIODNs share the same domain
*/
- if (!old_domain_info)
+ if (!dev->archdata.iommu_domain)
dev->archdata.iommu_domain = info;
spin_unlock_irqrestore(&device_domain_lock, flags);
@@ -1042,12 +1037,15 @@
group = get_shared_pci_device_group(pdev);
}
+ if (!group)
+ group = ERR_PTR(-ENODEV);
+
return group;
}
static int fsl_pamu_add_device(struct device *dev)
{
- struct iommu_group *group = NULL;
+ struct iommu_group *group = ERR_PTR(-ENODEV);
struct pci_dev *pdev;
const u32 *prop;
int ret, len;
@@ -1070,7 +1068,7 @@
group = get_device_iommu_group(dev);
}
- if (!group || IS_ERR(group))
+ if (IS_ERR(group))
return PTR_ERR(group);
ret = iommu_group_add_device(group, dev);
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 7e11c9d..7c131cf 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -42,6 +42,7 @@
#include <linux/irqchip/chained_irq.h>
#include <linux/irqchip/arm-gic.h>
+#include <asm/cputype.h>
#include <asm/irq.h>
#include <asm/exception.h>
#include <asm/smp_plat.h>
@@ -954,7 +955,9 @@
}
for_each_possible_cpu(cpu) {
- unsigned long offset = percpu_offset * cpu_logical_map(cpu);
+ u32 mpidr = cpu_logical_map(cpu);
+ u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ unsigned long offset = percpu_offset * core_id;
*per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset;
*per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset;
}
@@ -1071,8 +1074,10 @@
gic_cnt++;
return 0;
}
+IRQCHIP_DECLARE(gic_400, "arm,gic-400", gic_of_init);
IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
+IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init);
IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
diff --git a/drivers/irqchip/irq-versatile-fpga.c b/drivers/irqchip/irq-versatile-fpga.c
index 3ae2bb8..ccf5854 100644
--- a/drivers/irqchip/irq-versatile-fpga.c
+++ b/drivers/irqchip/irq-versatile-fpga.c
@@ -14,6 +14,8 @@
#include <asm/exception.h>
#include <asm/mach/irq.h>
+#include "irqchip.h"
+
#define IRQ_STATUS 0x00
#define IRQ_RAW_STATUS 0x04
#define IRQ_ENABLE_SET 0x08
@@ -26,6 +28,8 @@
#define FIQ_ENABLE_SET 0x28
#define FIQ_ENABLE_CLEAR 0x2C
+#define PIC_ENABLES 0x20 /* set interrupt pass through bits */
+
/**
* struct fpga_irq_data - irq data container for the FPGA IRQ controller
* @base: memory offset in virtual memory
@@ -201,14 +205,26 @@
/* Some chips are cascaded from a parent IRQ */
parent_irq = irq_of_parse_and_map(node, 0);
- if (!parent_irq)
+ if (!parent_irq) {
+ set_handle_irq(fpga_handle_irq);
parent_irq = -1;
+ }
fpga_irq_init(base, node->name, 0, parent_irq, valid_mask, node);
writel(clear_mask, base + IRQ_ENABLE_CLEAR);
writel(clear_mask, base + FIQ_ENABLE_CLEAR);
+ /*
+ * On Versatile AB/PB, some secondary interrupts have a direct
+ * pass-thru to the primary controller for IRQs 20 and 22-31 which need
+ * to be enabled. See section 3.10 of the Versatile AB user guide.
+ */
+ if (of_device_is_compatible(node, "arm,versatile-sic"))
+ writel(0xffd00000, base + PIC_ENABLES);
+
return 0;
}
+IRQCHIP_DECLARE(arm_fpga, "arm,versatile-fpga-irq", fpga_irq_of_init);
+IRQCHIP_DECLARE(arm_fpga_sic, "arm,versatile-sic", fpga_irq_of_init);
#endif
diff --git a/drivers/isdn/hisax/l3ni1.c b/drivers/isdn/hisax/l3ni1.c
index 0df6691..8dc791b 100644
--- a/drivers/isdn/hisax/l3ni1.c
+++ b/drivers/isdn/hisax/l3ni1.c
@@ -2059,13 +2059,17 @@
memcpy(p, ic->parm.ni1_io.data, ic->parm.ni1_io.datalen); /* copy data */
l = (p - temp) + ic->parm.ni1_io.datalen; /* total length */
- if (ic->parm.ni1_io.timeout > 0)
- if (!(pc = ni1_new_l3_process(st, -1)))
- { free_invoke_id(st, id);
+ if (ic->parm.ni1_io.timeout > 0) {
+ pc = ni1_new_l3_process(st, -1);
+ if (!pc) {
+ free_invoke_id(st, id);
return (-2);
}
- pc->prot.ni1.ll_id = ic->parm.ni1_io.ll_id; /* remember id */
- pc->prot.ni1.proc = ic->parm.ni1_io.proc; /* and procedure */
+ /* remember id */
+ pc->prot.ni1.ll_id = ic->parm.ni1_io.ll_id;
+ /* and procedure */
+ pc->prot.ni1.proc = ic->parm.ni1_io.proc;
+ }
if (!(skb = l3_alloc_skb(l)))
{ free_invoke_id(st, id);
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index 61ac632..a333b7f 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -442,7 +442,7 @@
{
struct sock_fprog uprog;
struct sock_filter *code = NULL;
- int len, err;
+ int len;
if (copy_from_user(&uprog, arg, sizeof(uprog)))
return -EFAULT;
@@ -458,12 +458,6 @@
if (IS_ERR(code))
return PTR_ERR(code);
- err = sk_chk_filter(code, uprog.len);
- if (err) {
- kfree(code);
- return err;
- }
-
*p = code;
return uprog.len;
}
diff --git a/drivers/md/dm-cache-metadata.c b/drivers/md/dm-cache-metadata.c
index 4ead4ba..d2899e7 100644
--- a/drivers/md/dm-cache-metadata.c
+++ b/drivers/md/dm-cache-metadata.c
@@ -425,6 +425,15 @@
disk_super = dm_block_data(sblock);
+ /* Verify the data block size hasn't changed */
+ if (le32_to_cpu(disk_super->data_block_size) != cmd->data_block_size) {
+ DMERR("changing the data block size (from %u to %llu) is not supported",
+ le32_to_cpu(disk_super->data_block_size),
+ (unsigned long long)cmd->data_block_size);
+ r = -EINVAL;
+ goto bad;
+ }
+
r = __check_incompat_features(disk_super, cmd);
if (r < 0)
goto bad;
diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c
index b086a94..e9d33ad 100644
--- a/drivers/md/dm-thin-metadata.c
+++ b/drivers/md/dm-thin-metadata.c
@@ -613,6 +613,15 @@
disk_super = dm_block_data(sblock);
+ /* Verify the data block size hasn't changed */
+ if (le32_to_cpu(disk_super->data_block_size) != pmd->data_block_size) {
+ DMERR("changing the data block size (from %u to %llu) is not supported",
+ le32_to_cpu(disk_super->data_block_size),
+ (unsigned long long)pmd->data_block_size);
+ r = -EINVAL;
+ goto bad_unlock_sblock;
+ }
+
r = __check_incompat_features(disk_super, pmd);
if (r < 0)
goto bad_unlock_sblock;
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index e4ec355..a7543ba 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -52,6 +52,11 @@
/* Atmel chips */
#define AT49BV640D 0x02de
#define AT49BV640DT 0x02db
+/* Sharp chips */
+#define LH28F640BFHE_PTTL90 0x00b0
+#define LH28F640BFHE_PBTL90 0x00b1
+#define LH28F640BFHE_PTTL70A 0x00b2
+#define LH28F640BFHE_PBTL70A 0x00b3
static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -258,6 +263,36 @@
(cfi->cfiq->EraseRegionInfo[1] & 0xffff0000) | 0x3e;
};
+static int is_LH28F640BF(struct cfi_private *cfi)
+{
+ /* Sharp LH28F640BF Family */
+ if (cfi->mfr == CFI_MFR_SHARP && (
+ cfi->id == LH28F640BFHE_PTTL90 || cfi->id == LH28F640BFHE_PBTL90 ||
+ cfi->id == LH28F640BFHE_PTTL70A || cfi->id == LH28F640BFHE_PBTL70A))
+ return 1;
+ return 0;
+}
+
+static void fixup_LH28F640BF(struct mtd_info *mtd)
+{
+ struct map_info *map = mtd->priv;
+ struct cfi_private *cfi = map->fldrv_priv;
+ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
+
+ /* Reset the Partition Configuration Register on LH28F640BF
+ * to a single partition (PCR = 0x000): PCR is embedded into A0-A15. */
+ if (is_LH28F640BF(cfi)) {
+ printk(KERN_INFO "Reset Partition Config. Register: 1 Partition of 4 planes\n");
+ map_write(map, CMD(0x60), 0);
+ map_write(map, CMD(0x04), 0);
+
+ /* We have set one single partition thus
+ * Simultaneous Operations are not allowed */
+ printk(KERN_INFO "cfi_cmdset_0001: Simultaneous Operations disabled\n");
+ extp->FeatureSupport &= ~512;
+ }
+}
+
static void fixup_use_point(struct mtd_info *mtd)
{
struct map_info *map = mtd->priv;
@@ -309,6 +344,8 @@
{ CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct },
{ CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb },
{ CFI_MFR_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock },
+ { CFI_MFR_SHARP, CFI_ID_ANY, fixup_unlock_powerup_lock },
+ { CFI_MFR_SHARP, CFI_ID_ANY, fixup_LH28F640BF },
{ 0, 0, NULL }
};
@@ -1649,6 +1686,12 @@
initial_adr = adr;
cmd_adr = adr & ~(wbufsize-1);
+ /* Sharp LH28F640BF chips need the first address for the
+ * Page Buffer Program command. See Table 5 of
+ * LH28F320BF, LH28F640BF, LH28F128BF Series (Appendix FUM00701) */
+ if (is_LH28F640BF(cfi))
+ cmd_adr = adr;
+
/* Let's determine this according to the interleave only once */
write_cmd = (cfi->cfiq->P_ID != P_ID_INTEL_PERFORMANCE) ? CMD(0xe8) : CMD(0xe9);
diff --git a/drivers/mtd/devices/elm.c b/drivers/mtd/devices/elm.c
index 7df8694..b4f61c7 100644
--- a/drivers/mtd/devices/elm.c
+++ b/drivers/mtd/devices/elm.c
@@ -475,6 +475,7 @@
ELM_SYNDROME_FRAGMENT_1 + offset);
regs->elm_syndrome_fragment_0[i] = elm_read_reg(info,
ELM_SYNDROME_FRAGMENT_0 + offset);
+ break;
default:
return -EINVAL;
}
@@ -520,6 +521,7 @@
regs->elm_syndrome_fragment_1[i]);
elm_write_reg(info, ELM_SYNDROME_FRAGMENT_0 + offset,
regs->elm_syndrome_fragment_0[i]);
+ break;
default:
return -EINVAL;
}
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 41167e9..4f3e80c 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -4047,8 +4047,10 @@
ecc->layout->oobavail += ecc->layout->oobfree[i].length;
mtd->oobavail = ecc->layout->oobavail;
- /* ECC sanity check: warn noisily if it's too weak */
- WARN_ON(!nand_ecc_strength_good(mtd));
+ /* ECC sanity check: warn if it's too weak */
+ if (!nand_ecc_strength_good(mtd))
+ pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
+ mtd->name);
/*
* Set the number of read / write steps for one page depending on ECC
diff --git a/drivers/mtd/ubi/fastmap.c b/drivers/mtd/ubi/fastmap.c
index b04e7d0..0431b46 100644
--- a/drivers/mtd/ubi/fastmap.c
+++ b/drivers/mtd/ubi/fastmap.c
@@ -125,7 +125,7 @@
parent = *p;
av = rb_entry(parent, struct ubi_ainf_volume, rb);
- if (vol_id < av->vol_id)
+ if (vol_id > av->vol_id)
p = &(*p)->rb_left;
else
p = &(*p)->rb_right;
@@ -423,7 +423,7 @@
pnum, err);
ret = err > 0 ? UBI_BAD_FASTMAP : err;
goto out;
- } else if (ret == UBI_IO_BITFLIPS)
+ } else if (err == UBI_IO_BITFLIPS)
scrub = 1;
/*
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 3a451b6..701f86c 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4068,7 +4068,7 @@
}
if (ad_select) {
- bond_opt_initstr(&newval, lacp_rate);
+ bond_opt_initstr(&newval, ad_select);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_AD_SELECT),
&newval);
if (!valptr) {
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 141160e..5776e50 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -654,13 +654,13 @@
work_done = bcm_sysport_tx_reclaim(ring->priv, ring);
- if (work_done < budget) {
+ if (work_done == 0) {
napi_complete(napi);
/* re-enable TX interrupt */
intrl2_1_mask_clear(ring->priv, BIT(ring->index));
}
- return work_done;
+ return 0;
}
static void bcm_sysport_tx_reclaim_all(struct bcm_sysport_priv *priv)
@@ -1254,28 +1254,17 @@
usleep_range(1000, 2000);
}
-static inline int umac_reset(struct bcm_sysport_priv *priv)
+static inline void umac_reset(struct bcm_sysport_priv *priv)
{
- unsigned int timeout = 0;
u32 reg;
- int ret = 0;
- umac_writel(priv, 0, UMAC_CMD);
- while (timeout++ < 1000) {
- reg = umac_readl(priv, UMAC_CMD);
- if (!(reg & CMD_SW_RESET))
- break;
-
- udelay(1);
- }
-
- if (timeout == 1000) {
- dev_err(&priv->pdev->dev,
- "timeout waiting for MAC to come out of reset\n");
- ret = -ETIMEDOUT;
- }
-
- return ret;
+ reg = umac_readl(priv, UMAC_CMD);
+ reg |= CMD_SW_RESET;
+ umac_writel(priv, reg, UMAC_CMD);
+ udelay(10);
+ reg = umac_readl(priv, UMAC_CMD);
+ reg &= ~CMD_SW_RESET;
+ umac_writel(priv, reg, UMAC_CMD);
}
static void umac_set_hw_addr(struct bcm_sysport_priv *priv,
@@ -1303,11 +1292,7 @@
int ret;
/* Reset UniMAC */
- ret = umac_reset(priv);
- if (ret) {
- netdev_err(dev, "UniMAC reset failed\n");
- return ret;
- }
+ umac_reset(priv);
/* Flush TX and RX FIFOs at TOPCTRL level */
topctrl_flush(priv);
@@ -1589,12 +1574,6 @@
BUILD_BUG_ON(sizeof(struct bcm_tsb) != 8);
dev->needed_headroom += sizeof(struct bcm_tsb);
- /* We are interfaced to a switch which handles the multicast
- * filtering for us, so we do not support programming any
- * multicast hash table in this Ethernet MAC.
- */
- dev->flags &= ~IFF_MULTICAST;
-
/* libphy will adjust the link state accordingly */
netif_carrier_off(dev);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 47c5814..4b875da 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -797,7 +797,8 @@
return;
}
- bnx2x_frag_free(fp, new_data);
+ if (new_data)
+ bnx2x_frag_free(fp, new_data);
drop:
/* drop the packet and keep the buffer in the bin */
DP(NETIF_MSG_RX_STATUS,
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 2887034..6a8b145 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -12937,7 +12937,7 @@
* without the default SB.
* For VFs there is no default SB, then we return (index+1).
*/
- pci_read_config_word(pdev, pdev->msix_cap + PCI_MSI_FLAGS, &control);
+ pci_read_config_word(pdev, pdev->msix_cap + PCI_MSIX_FLAGS, &control);
index = control & PCI_MSIX_FLAGS_QSIZE;
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 5ba1cfb..16281ad 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1408,13 +1408,6 @@
if (cb->skb)
continue;
- /* set the DMA descriptor length once and for all
- * it will only change if we support dynamically sizing
- * priv->rx_buf_len, but we do not
- */
- dmadesc_set_length_status(priv, priv->rx_bd_assign_ptr,
- priv->rx_buf_len << DMA_BUFLENGTH_SHIFT);
-
ret = bcmgenet_rx_refill(priv, cb);
if (ret)
break;
@@ -2535,14 +2528,17 @@
netif_set_real_num_tx_queues(priv->dev, priv->hw_params->tx_queues + 1);
netif_set_real_num_rx_queues(priv->dev, priv->hw_params->rx_queues + 1);
- err = register_netdev(dev);
- if (err)
- goto err_clk_disable;
+ /* libphy will determine the link state */
+ netif_carrier_off(dev);
/* Turn off the main clock, WOL clock is handled separately */
if (!IS_ERR(priv->clk))
clk_disable_unprepare(priv->clk);
+ err = register_netdev(dev);
+ if (err)
+ goto err;
+
return err;
err_clk_disable:
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
index 0f11710..e23c993 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -331,9 +331,9 @@
#define EXT_ENERGY_DET_MASK (1 << 12)
#define EXT_RGMII_OOB_CTRL 0x0C
-#define RGMII_MODE_EN (1 << 0)
#define RGMII_LINK (1 << 4)
#define OOB_DISABLE (1 << 5)
+#define RGMII_MODE_EN (1 << 6)
#define ID_MODE_DIS (1 << 16)
#define EXT_GPHY_CTRL 0x1C
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 34a26e4..1e187fb 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2902,7 +2902,7 @@
for_all_evt_queues(adapter, eqo, i) {
napi_enable(&eqo->napi);
be_enable_busy_poll(eqo);
- be_eq_notify(adapter, eqo->q.id, true, false, 0);
+ be_eq_notify(adapter, eqo->q.id, true, true, 0);
}
adapter->flags |= BE_FLAGS_NAPI_ENABLED;
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index fab39e2..36fc429 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -2990,11 +2990,11 @@
if (ug_info->rxExtendedFiltering) {
size += THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING;
if (ug_info->largestexternallookupkeysize ==
- QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES)
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES)
size +=
THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING_8;
if (ug_info->largestexternallookupkeysize ==
- QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES)
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES)
size +=
THREAD_RX_PRAM_ADDITIONAL_FOR_EXTENDED_FILTERING_16;
}
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index a2db388..ee74f95 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -1481,6 +1481,13 @@
s32 ret_val;
u16 i, rar_count = mac->rar_entry_count;
+ if ((hw->mac.type >= e1000_i210) &&
+ !(igb_get_flash_presence_i210(hw))) {
+ ret_val = igb_pll_workaround_i210(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
/* Initialize identification LED */
ret_val = igb_id_led_init(hw);
if (ret_val) {
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 2a8bb35..217f813 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -46,14 +46,15 @@
#define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* SDP3 Data direction */
/* Physical Func Reset Done Indication */
-#define E1000_CTRL_EXT_PFRSTD 0x00004000
-#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
-#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
-#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000
-#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
-#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
-#define E1000_CTRL_EXT_EIAME 0x01000000
-#define E1000_CTRL_EXT_IRCA 0x00000001
+#define E1000_CTRL_EXT_PFRSTD 0x00004000
+#define E1000_CTRL_EXT_SDLPE 0X00040000 /* SerDes Low Power Enable */
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000
+#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
+#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
+#define E1000_CTRL_EXT_EIAME 0x01000000
+#define E1000_CTRL_EXT_IRCA 0x00000001
/* Interrupt delay cancellation */
/* Driver loaded bit for FW */
#define E1000_CTRL_EXT_DRV_LOAD 0x10000000
@@ -62,6 +63,7 @@
/* packet buffer parity error detection enabled */
/* descriptor FIFO parity error detection enable */
#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
+#define E1000_CTRL_EXT_PHYPDEN 0x00100000
#define E1000_I2CCMD_REG_ADDR_SHIFT 16
#define E1000_I2CCMD_PHY_ADDR_SHIFT 24
#define E1000_I2CCMD_OPCODE_READ 0x08000000
diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h
index 89925e4..ce55ea5 100644
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -567,4 +567,7 @@
/* These functions must be implemented by drivers */
s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+
+void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value);
+void igb_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value);
#endif /* _E1000_HW_H_ */
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c
index 337161f..65d9316 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.c
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.c
@@ -834,3 +834,69 @@
}
return ret_val;
}
+
+/**
+ * igb_pll_workaround_i210
+ * @hw: pointer to the HW structure
+ *
+ * Works around an errata in the PLL circuit where it occasionally
+ * provides the wrong clock frequency after power up.
+ **/
+s32 igb_pll_workaround_i210(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u32 wuc, mdicnfg, ctrl, ctrl_ext, reg_val;
+ u16 nvm_word, phy_word, pci_word, tmp_nvm;
+ int i;
+
+ /* Get and set needed register values */
+ wuc = rd32(E1000_WUC);
+ mdicnfg = rd32(E1000_MDICNFG);
+ reg_val = mdicnfg & ~E1000_MDICNFG_EXT_MDIO;
+ wr32(E1000_MDICNFG, reg_val);
+
+ /* Get data from NVM, or set default */
+ ret_val = igb_read_invm_word_i210(hw, E1000_INVM_AUTOLOAD,
+ &nvm_word);
+ if (ret_val)
+ nvm_word = E1000_INVM_DEFAULT_AL;
+ tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL;
+ for (i = 0; i < E1000_MAX_PLL_TRIES; i++) {
+ /* check current state directly from internal PHY */
+ igb_read_phy_reg_gs40g(hw, (E1000_PHY_PLL_FREQ_PAGE |
+ E1000_PHY_PLL_FREQ_REG), &phy_word);
+ if ((phy_word & E1000_PHY_PLL_UNCONF)
+ != E1000_PHY_PLL_UNCONF) {
+ ret_val = 0;
+ break;
+ } else {
+ ret_val = -E1000_ERR_PHY;
+ }
+ /* directly reset the internal PHY */
+ ctrl = rd32(E1000_CTRL);
+ wr32(E1000_CTRL, ctrl|E1000_CTRL_PHY_RST);
+
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ ctrl_ext |= (E1000_CTRL_EXT_PHYPDEN | E1000_CTRL_EXT_SDLPE);
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+
+ wr32(E1000_WUC, 0);
+ reg_val = (E1000_INVM_AUTOLOAD << 4) | (tmp_nvm << 16);
+ wr32(E1000_EEARBC_I210, reg_val);
+
+ igb_read_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+ pci_word |= E1000_PCI_PMCSR_D3;
+ igb_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+ usleep_range(1000, 2000);
+ pci_word &= ~E1000_PCI_PMCSR_D3;
+ igb_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+ reg_val = (E1000_INVM_AUTOLOAD << 4) | (nvm_word << 16);
+ wr32(E1000_EEARBC_I210, reg_val);
+
+ /* restore WUC register */
+ wr32(E1000_WUC, wuc);
+ }
+ /* restore MDICNFG setting */
+ wr32(E1000_MDICNFG, mdicnfg);
+ return ret_val;
+}
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.h b/drivers/net/ethernet/intel/igb/e1000_i210.h
index 9f34976..3442b63 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.h
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.h
@@ -33,6 +33,7 @@
s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data);
s32 igb_init_nvm_params_i210(struct e1000_hw *hw);
bool igb_get_flash_presence_i210(struct e1000_hw *hw);
+s32 igb_pll_workaround_i210(struct e1000_hw *hw);
#define E1000_STM_OPCODE 0xDB00
#define E1000_EEPROM_FLASH_SIZE_WORD 0x11
@@ -78,4 +79,15 @@
#define NVM_LED_1_CFG_DEFAULT_I211 0x0184
#define NVM_LED_0_2_CFG_DEFAULT_I211 0x200C
+/* PLL Defines */
+#define E1000_PCI_PMCSR 0x44
+#define E1000_PCI_PMCSR_D3 0x03
+#define E1000_MAX_PLL_TRIES 5
+#define E1000_PHY_PLL_UNCONF 0xFF
+#define E1000_PHY_PLL_FREQ_PAGE 0xFC0000
+#define E1000_PHY_PLL_FREQ_REG 0x000E
+#define E1000_INVM_DEFAULT_AL 0x202F
+#define E1000_INVM_AUTOLOAD 0x0A
+#define E1000_INVM_PLL_WO_VAL 0x0010
+
#endif
diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
index 1cc4b1a7..f5ba4e4 100644
--- a/drivers/net/ethernet/intel/igb/e1000_regs.h
+++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
@@ -66,6 +66,7 @@
#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
#define E1000_PBS 0x01008 /* Packet Buffer Size */
#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_EEARBC_I210 0x12024 /* EEPROM Auto Read Bus Control */
#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
#define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */
#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index f145adb..a9537ba 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -7215,6 +7215,20 @@
}
}
+void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ pci_read_config_word(adapter->pdev, reg, value);
+}
+
+void igb_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ pci_write_config_word(adapter->pdev, reg, *value);
+}
+
s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
{
struct igb_adapter *adapter = hw->back;
@@ -7578,6 +7592,8 @@
if (netif_running(netdev))
igb_close(netdev);
+ else
+ igb_reset(adapter);
igb_clear_interrupt_scheme(adapter);
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 45beca1..dadd9a5 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -1207,7 +1207,7 @@
command = l3_offs << MVNETA_TX_L3_OFF_SHIFT;
command |= ip_hdr_len << MVNETA_TX_IP_HLEN_SHIFT;
- if (l3_proto == swab16(ETH_P_IP))
+ if (l3_proto == htons(ETH_P_IP))
command |= MVNETA_TXD_IP_CSUM;
else
command |= MVNETA_TX_L3_IP6;
@@ -2529,7 +2529,7 @@
if (phydev->speed == SPEED_1000)
val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
- else
+ else if (phydev->speed == SPEED_100)
val |= MVNETA_GMAC_CONFIG_MII_SPEED;
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
diff --git a/drivers/net/ethernet/mellanox/mlx4/cq.c b/drivers/net/ethernet/mellanox/mlx4/cq.c
index 80f7252..56022d6 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cq.c
@@ -294,8 +294,6 @@
init_completion(&cq->free);
cq->irq = priv->eq_table.eq[cq->vector].irq;
- cq->irq_affinity_change = false;
-
return 0;
err_radix:
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_cq.c b/drivers/net/ethernet/mellanox/mlx4/en_cq.c
index 4b21307..14c0004 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_cq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_cq.c
@@ -128,6 +128,10 @@
mlx4_warn(mdev, "Failed assigning an EQ to %s, falling back to legacy EQ's\n",
name);
}
+
+ cq->irq_desc =
+ irq_to_desc(mlx4_eq_get_irq(mdev->dev,
+ cq->vector));
}
} else {
cq->vector = (cq->ring + 1 + priv->port) %
@@ -187,8 +191,6 @@
mlx4_en_unmap_buffer(&cq->wqres.buf);
mlx4_free_hwq_res(mdev->dev, &cq->wqres, cq->buf_size);
if (priv->mdev->dev->caps.comp_pool && cq->vector) {
- if (!cq->is_tx)
- irq_set_affinity_hint(cq->mcq.irq, NULL);
mlx4_release_eq(priv->mdev->dev, cq->vector);
}
cq->vector = 0;
@@ -204,6 +206,7 @@
if (!cq->is_tx) {
napi_hash_del(&cq->napi);
synchronize_rcu();
+ irq_set_affinity_hint(cq->mcq.irq, NULL);
}
netif_napi_del(&cq->napi);
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index fa1a069..68d763d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -417,6 +417,8 @@
coal->tx_coalesce_usecs = priv->tx_usecs;
coal->tx_max_coalesced_frames = priv->tx_frames;
+ coal->tx_max_coalesced_frames_irq = priv->tx_work_limit;
+
coal->rx_coalesce_usecs = priv->rx_usecs;
coal->rx_max_coalesced_frames = priv->rx_frames;
@@ -426,6 +428,7 @@
coal->rx_coalesce_usecs_high = priv->rx_usecs_high;
coal->rate_sample_interval = priv->sample_interval;
coal->use_adaptive_rx_coalesce = priv->adaptive_rx_coal;
+
return 0;
}
@@ -434,6 +437,9 @@
{
struct mlx4_en_priv *priv = netdev_priv(dev);
+ if (!coal->tx_max_coalesced_frames_irq)
+ return -EINVAL;
+
priv->rx_frames = (coal->rx_max_coalesced_frames ==
MLX4_EN_AUTO_CONF) ?
MLX4_EN_RX_COAL_TARGET :
@@ -457,6 +463,7 @@
priv->rx_usecs_high = coal->rx_coalesce_usecs_high;
priv->sample_interval = coal->rate_sample_interval;
priv->adaptive_rx_coal = coal->use_adaptive_rx_coalesce;
+ priv->tx_work_limit = coal->tx_max_coalesced_frames_irq;
return mlx4_en_moderation_update(priv);
}
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 7d4fb7b..7345c43 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -2336,7 +2336,7 @@
struct mlx4_en_priv *priv = netdev_priv(dev);
__be16 current_port;
- if (!(priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS))
+ if (priv->mdev->dev->caps.tunnel_offload_mode != MLX4_TUNNEL_OFFLOAD_MODE_VXLAN)
return;
if (sa_family == AF_INET6)
@@ -2473,6 +2473,7 @@
MLX4_WQE_CTRL_SOLICITED);
priv->num_tx_rings_p_up = mdev->profile.num_tx_rings_p_up;
priv->tx_ring_num = prof->tx_ring_num;
+ priv->tx_work_limit = MLX4_EN_DEFAULT_TX_WORK;
priv->tx_ring = kzalloc(sizeof(struct mlx4_en_tx_ring *) * MAX_TX_RINGS,
GFP_KERNEL);
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
index d2d4157..5535862 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -40,6 +40,7 @@
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/vmalloc.h>
+#include <linux/irq.h>
#include "mlx4_en.h"
@@ -782,6 +783,7 @@
PKT_HASH_TYPE_L3);
skb_record_rx_queue(gro_skb, cq->ring);
+ skb_mark_napi_id(gro_skb, &cq->napi);
if (ring->hwtstamp_rx_filter == HWTSTAMP_FILTER_ALL) {
timestamp = mlx4_en_get_cqe_ts(cqe);
@@ -896,16 +898,25 @@
/* If we used up all the quota - we're probably not done yet... */
if (done == budget) {
+ int cpu_curr;
+ const struct cpumask *aff;
+
INC_PERF_COUNTER(priv->pstats.napi_quota);
- if (unlikely(cq->mcq.irq_affinity_change)) {
- cq->mcq.irq_affinity_change = false;
+
+ cpu_curr = smp_processor_id();
+ aff = irq_desc_get_irq_data(cq->irq_desc)->affinity;
+
+ if (unlikely(!cpumask_test_cpu(cpu_curr, aff))) {
+ /* Current cpu is not according to smp_irq_affinity -
+ * probably affinity changed. need to stop this NAPI
+ * poll, and restart it on the right CPU
+ */
napi_complete(napi);
mlx4_en_arm_cq(priv, cq);
return 0;
}
} else {
/* Done for now */
- cq->mcq.irq_affinity_change = false;
napi_complete(napi);
mlx4_en_arm_cq(priv, cq);
}
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 8be7483..5045bab 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -351,9 +351,8 @@
return cnt;
}
-static int mlx4_en_process_tx_cq(struct net_device *dev,
- struct mlx4_en_cq *cq,
- int budget)
+static bool mlx4_en_process_tx_cq(struct net_device *dev,
+ struct mlx4_en_cq *cq)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_cq *mcq = &cq->mcq;
@@ -372,9 +371,10 @@
int factor = priv->cqe_factor;
u64 timestamp = 0;
int done = 0;
+ int budget = priv->tx_work_limit;
if (!priv->port_up)
- return 0;
+ return true;
index = cons_index & size_mask;
cqe = &buf[(index << factor) + factor];
@@ -447,7 +447,7 @@
netif_tx_wake_queue(ring->tx_queue);
ring->wake_queue++;
}
- return done;
+ return done < budget;
}
void mlx4_en_tx_irq(struct mlx4_cq *mcq)
@@ -467,24 +467,16 @@
struct mlx4_en_cq *cq = container_of(napi, struct mlx4_en_cq, napi);
struct net_device *dev = cq->dev;
struct mlx4_en_priv *priv = netdev_priv(dev);
- int done;
+ int clean_complete;
- done = mlx4_en_process_tx_cq(dev, cq, budget);
+ clean_complete = mlx4_en_process_tx_cq(dev, cq);
+ if (!clean_complete)
+ return budget;
- /* If we used up all the quota - we're probably not done yet... */
- if (done < budget) {
- /* Done for now */
- cq->mcq.irq_affinity_change = false;
- napi_complete(napi);
- mlx4_en_arm_cq(priv, cq);
- return done;
- } else if (unlikely(cq->mcq.irq_affinity_change)) {
- cq->mcq.irq_affinity_change = false;
- napi_complete(napi);
- mlx4_en_arm_cq(priv, cq);
- return 0;
- }
- return budget;
+ napi_complete(napi);
+ mlx4_en_arm_cq(priv, cq);
+
+ return 0;
}
static struct mlx4_en_tx_desc *mlx4_en_bounce_to_desc(struct mlx4_en_priv *priv,
diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index d954ec1..2a004b3 100644
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -53,11 +53,6 @@
MLX4_EQ_ENTRY_SIZE = 0x20
};
-struct mlx4_irq_notify {
- void *arg;
- struct irq_affinity_notify notify;
-};
-
#define MLX4_EQ_STATUS_OK ( 0 << 28)
#define MLX4_EQ_STATUS_WRITE_FAIL (10 << 28)
#define MLX4_EQ_OWNER_SW ( 0 << 24)
@@ -1088,57 +1083,6 @@
iounmap(priv->clr_base);
}
-static void mlx4_irq_notifier_notify(struct irq_affinity_notify *notify,
- const cpumask_t *mask)
-{
- struct mlx4_irq_notify *n = container_of(notify,
- struct mlx4_irq_notify,
- notify);
- struct mlx4_priv *priv = (struct mlx4_priv *)n->arg;
- struct radix_tree_iter iter;
- void **slot;
-
- radix_tree_for_each_slot(slot, &priv->cq_table.tree, &iter, 0) {
- struct mlx4_cq *cq = (struct mlx4_cq *)(*slot);
-
- if (cq->irq == notify->irq)
- cq->irq_affinity_change = true;
- }
-}
-
-static void mlx4_release_irq_notifier(struct kref *ref)
-{
- struct mlx4_irq_notify *n = container_of(ref, struct mlx4_irq_notify,
- notify.kref);
- kfree(n);
-}
-
-static void mlx4_assign_irq_notifier(struct mlx4_priv *priv,
- struct mlx4_dev *dev, int irq)
-{
- struct mlx4_irq_notify *irq_notifier = NULL;
- int err = 0;
-
- irq_notifier = kzalloc(sizeof(*irq_notifier), GFP_KERNEL);
- if (!irq_notifier) {
- mlx4_warn(dev, "Failed to allocate irq notifier. irq %d\n",
- irq);
- return;
- }
-
- irq_notifier->notify.irq = irq;
- irq_notifier->notify.notify = mlx4_irq_notifier_notify;
- irq_notifier->notify.release = mlx4_release_irq_notifier;
- irq_notifier->arg = priv;
- err = irq_set_affinity_notifier(irq, &irq_notifier->notify);
- if (err) {
- kfree(irq_notifier);
- irq_notifier = NULL;
- mlx4_warn(dev, "Failed to set irq notifier. irq %d\n", irq);
- }
-}
-
-
int mlx4_alloc_eq_table(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
@@ -1409,8 +1353,6 @@
continue;
/*we dont want to break here*/
}
- mlx4_assign_irq_notifier(priv, dev,
- priv->eq_table.eq[vec].irq);
eq_set_ci(&priv->eq_table.eq[vec], 1);
}
@@ -1427,6 +1369,14 @@
}
EXPORT_SYMBOL(mlx4_assign_eq);
+int mlx4_eq_get_irq(struct mlx4_dev *dev, int vec)
+{
+ struct mlx4_priv *priv = mlx4_priv(dev);
+
+ return priv->eq_table.eq[vec].irq;
+}
+EXPORT_SYMBOL(mlx4_eq_get_irq);
+
void mlx4_release_eq(struct mlx4_dev *dev, int vec)
{
struct mlx4_priv *priv = mlx4_priv(dev);
@@ -1438,9 +1388,6 @@
Belonging to a legacy EQ*/
mutex_lock(&priv->msix_ctl.pool_lock);
if (priv->msix_ctl.pool_bm & 1ULL << i) {
- irq_set_affinity_notifier(
- priv->eq_table.eq[vec].irq,
- NULL);
free_irq(priv->eq_table.eq[vec].irq,
&priv->eq_table.eq[vec]);
priv->msix_ctl.pool_bm &= ~(1ULL << i);
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 0e15295..d72a5a8 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -126,6 +126,8 @@
#define MAX_TX_RINGS (MLX4_EN_MAX_TX_RING_P_UP * \
MLX4_EN_NUM_UP)
+#define MLX4_EN_DEFAULT_TX_WORK 256
+
/* Target number of packets to coalesce with interrupt moderation */
#define MLX4_EN_RX_COAL_TARGET 44
#define MLX4_EN_RX_COAL_TIME 0x10
@@ -343,6 +345,7 @@
#define CQ_USER_PEND (MLX4_EN_CQ_STATE_POLL | MLX4_EN_CQ_STATE_POLL_YIELD)
spinlock_t poll_lock; /* protects from LLS/napi conflicts */
#endif /* CONFIG_NET_RX_BUSY_POLL */
+ struct irq_desc *irq_desc;
};
struct mlx4_en_port_profile {
@@ -542,6 +545,7 @@
__be32 ctrl_flags;
u32 flags;
u8 num_tx_rings_p_up;
+ u32 tx_work_limit;
u32 tx_ring_num;
u32 rx_ring_num;
u32 rx_skb_size;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mr.c b/drivers/net/ethernet/mellanox/mlx5/core/mr.c
index ba0401d4..184c361 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/mr.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/mr.c
@@ -94,6 +94,11 @@
write_lock_irq(&table->lock);
err = radix_tree_insert(&table->tree, mlx5_base_mkey(mr->key), mr);
write_unlock_irq(&table->lock);
+ if (err) {
+ mlx5_core_warn(dev, "failed radix tree insert of mr 0x%x, %d\n",
+ mlx5_base_mkey(mr->key), err);
+ mlx5_core_destroy_mkey(dev, mr);
+ }
return err;
}
@@ -104,12 +109,22 @@
struct mlx5_mr_table *table = &dev->priv.mr_table;
struct mlx5_destroy_mkey_mbox_in in;
struct mlx5_destroy_mkey_mbox_out out;
+ struct mlx5_core_mr *deleted_mr;
unsigned long flags;
int err;
memset(&in, 0, sizeof(in));
memset(&out, 0, sizeof(out));
+ write_lock_irqsave(&table->lock, flags);
+ deleted_mr = radix_tree_delete(&table->tree, mlx5_base_mkey(mr->key));
+ write_unlock_irqrestore(&table->lock, flags);
+ if (!deleted_mr) {
+ mlx5_core_warn(dev, "failed radix tree delete of mr 0x%x\n",
+ mlx5_base_mkey(mr->key));
+ return -ENOENT;
+ }
+
in.hdr.opcode = cpu_to_be16(MLX5_CMD_OP_DESTROY_MKEY);
in.mkey = cpu_to_be32(mlx5_mkey_to_idx(mr->key));
err = mlx5_cmd_exec(dev, &in, sizeof(in), &out, sizeof(out));
@@ -119,10 +134,6 @@
if (out.hdr.status)
return mlx5_cmd_status_to_err(&out.hdr);
- write_lock_irqsave(&table->lock, flags);
- radix_tree_delete(&table->tree, mlx5_base_mkey(mr->key));
- write_unlock_irqrestore(&table->lock, flags);
-
return err;
}
EXPORT_SYMBOL(mlx5_core_destroy_mkey);
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index be425ad..06bdc31 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -538,6 +538,7 @@
MagicPacket = (1 << 5), /* Wake up when receives a Magic Packet */
LinkUp = (1 << 4), /* Wake up when the cable connection is re-established */
Jumbo_En0 = (1 << 2), /* 8168 only. Reserved in the 8168b */
+ Rdy_to_L23 = (1 << 1), /* L23 Enable */
Beacon_en = (1 << 0), /* 8168 only. Reserved in the 8168b */
/* Config4 register */
@@ -4897,6 +4898,21 @@
PCI_EXP_LNKCTL_CLKREQ_EN);
}
+static void rtl_pcie_state_l2l3_enable(struct rtl8169_private *tp, bool enable)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ u8 data;
+
+ data = RTL_R8(Config3);
+
+ if (enable)
+ data |= Rdy_to_L23;
+ else
+ data &= ~Rdy_to_L23;
+
+ RTL_W8(Config3, data);
+}
+
#define R8168_CPCMD_QUIRK_MASK (\
EnableBist | \
Mac_dbgo_oe | \
@@ -5246,6 +5262,7 @@
};
rtl_hw_start_8168f(tp);
+ rtl_pcie_state_l2l3_enable(tp, false);
rtl_ephy_init(tp, e_info_8168f_1, ARRAY_SIZE(e_info_8168f_1));
@@ -5284,6 +5301,8 @@
rtl_w1w0_eri(tp, 0x2fc, ERIAR_MASK_0001, 0x01, 0x06, ERIAR_EXGMAC);
rtl_w1w0_eri(tp, 0x1b0, ERIAR_MASK_0011, 0x0000, 0x1000, ERIAR_EXGMAC);
+
+ rtl_pcie_state_l2l3_enable(tp, false);
}
static void rtl_hw_start_8168g_2(struct rtl8169_private *tp)
@@ -5536,6 +5555,8 @@
RTL_W8(DLLPR, RTL_R8(DLLPR) | PFM_EN);
rtl_ephy_init(tp, e_info_8105e_1, ARRAY_SIZE(e_info_8105e_1));
+
+ rtl_pcie_state_l2l3_enable(tp, false);
}
static void rtl_hw_start_8105e_2(struct rtl8169_private *tp)
@@ -5571,6 +5592,8 @@
rtl_eri_write(tp, 0xc0, ERIAR_MASK_0011, 0x0000, ERIAR_EXGMAC);
rtl_eri_write(tp, 0xb8, ERIAR_MASK_0011, 0x0000, ERIAR_EXGMAC);
rtl_w1w0_eri(tp, 0x0d4, ERIAR_MASK_0011, 0x0e00, 0xff00, ERIAR_EXGMAC);
+
+ rtl_pcie_state_l2l3_enable(tp, false);
}
static void rtl_hw_start_8106(struct rtl8169_private *tp)
@@ -5583,6 +5606,8 @@
RTL_W32(MISC, (RTL_R32(MISC) | DISABLE_LAN_EN) & ~EARLY_TALLY_EN);
RTL_W8(MCU, RTL_R8(MCU) | EN_NDP | EN_OOB_RESET);
RTL_W8(DLLPR, RTL_R8(DLLPR) & ~PFM_EN);
+
+ rtl_pcie_state_l2l3_enable(tp, false);
}
static void rtl_hw_start_8101(struct net_device *dev)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index b3e148e..9d37483 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -320,11 +320,8 @@
static void dwmac1000_ctrl_ane(void __iomem *ioaddr, bool restart)
{
- u32 value;
-
- value = readl(ioaddr + GMAC_AN_CTRL);
/* auto negotiation enable and External Loopback enable */
- value = GMAC_AN_CTRL_ANE | GMAC_AN_CTRL_ELE;
+ u32 value = GMAC_AN_CTRL_ANE | GMAC_AN_CTRL_ELE;
if (restart)
value |= GMAC_AN_CTRL_RAN;
diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index 7e6628a..1e2bcf5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -145,7 +145,7 @@
x->rx_msg_type_delay_req++;
else if (p->des4.erx.msg_type == RDES_EXT_DELAY_RESP)
x->rx_msg_type_delay_resp++;
- else if (p->des4.erx.msg_type == RDES_EXT_DELAY_REQ)
+ else if (p->des4.erx.msg_type == RDES_EXT_PDELAY_REQ)
x->rx_msg_type_pdelay_req++;
else if (p->des4.erx.msg_type == RDES_EXT_PDELAY_RESP)
x->rx_msg_type_pdelay_resp++;
diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c
index eb78203..2aa5727 100644
--- a/drivers/net/fddi/defxx.c
+++ b/drivers/net/fddi/defxx.c
@@ -291,7 +291,11 @@
static int dfx_rcv_init(DFX_board_t *bp, int get_buffers);
static void dfx_rcv_queue_process(DFX_board_t *bp);
+#ifdef DYNAMIC_BUFFERS
static void dfx_rcv_flush(DFX_board_t *bp);
+#else
+static inline void dfx_rcv_flush(DFX_board_t *bp) {}
+#endif
static netdev_tx_t dfx_xmt_queue_pkt(struct sk_buff *skb,
struct net_device *dev);
@@ -2849,7 +2853,7 @@
* Align an sk_buff to a boundary power of 2
*
*/
-
+#ifdef DYNAMIC_BUFFERS
static void my_skb_align(struct sk_buff *skb, int n)
{
unsigned long x = (unsigned long)skb->data;
@@ -2859,7 +2863,7 @@
skb_reserve(skb, v - x);
}
-
+#endif
/*
* ================
@@ -3074,10 +3078,7 @@
break;
}
else {
-#ifndef DYNAMIC_BUFFERS
- if (! rx_in_place)
-#endif
- {
+ if (!rx_in_place) {
/* Receive buffer allocated, pass receive packet up */
skb_copy_to_linear_data(skb,
@@ -3453,10 +3454,6 @@
}
}
-#else
-static inline void dfx_rcv_flush( DFX_board_t *bp )
-{
-}
#endif /* DYNAMIC_BUFFERS */
/*
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 6a999e6..9408157 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -1323,15 +1323,15 @@
{
struct dp83640_private *dp83640 = phydev->priv;
- if (!dp83640->hwts_rx_en)
- return false;
-
if (is_status_frame(skb, type)) {
decode_status_frame(dp83640, skb);
kfree_skb(skb);
return true;
}
+ if (!dp83640->hwts_rx_en)
+ return false;
+
SKB_PTP_TYPE(skb) = type;
skb_queue_tail(&dp83640->rx_queue, skb);
schedule_work(&dp83640->ts_work);
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 2e58aa5..4eaadcf 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -187,6 +187,50 @@
return d ? to_mii_bus(d) : NULL;
}
EXPORT_SYMBOL(of_mdio_find_bus);
+
+/* Walk the list of subnodes of a mdio bus and look for a node that matches the
+ * phy's address with its 'reg' property. If found, set the of_node pointer for
+ * the phy. This allows auto-probed pyh devices to be supplied with information
+ * passed in via DT.
+ */
+static void of_mdiobus_link_phydev(struct mii_bus *mdio,
+ struct phy_device *phydev)
+{
+ struct device *dev = &phydev->dev;
+ struct device_node *child;
+
+ if (dev->of_node || !mdio->dev.of_node)
+ return;
+
+ for_each_available_child_of_node(mdio->dev.of_node, child) {
+ int addr;
+ int ret;
+
+ ret = of_property_read_u32(child, "reg", &addr);
+ if (ret < 0) {
+ dev_err(dev, "%s has invalid PHY address\n",
+ child->full_name);
+ continue;
+ }
+
+ /* A PHY must have a reg property in the range [0-31] */
+ if (addr >= PHY_MAX_ADDR) {
+ dev_err(dev, "%s PHY address %i is too large\n",
+ child->full_name, addr);
+ continue;
+ }
+
+ if (addr == phydev->addr) {
+ dev->of_node = child;
+ return;
+ }
+ }
+}
+#else /* !IS_ENABLED(CONFIG_OF_MDIO) */
+static inline void of_mdiobus_link_phydev(struct mii_bus *mdio,
+ struct phy_device *phydev)
+{
+}
#endif
/**
diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index 91d6c12..e2f20f8 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -539,7 +539,7 @@
{
struct sock_fprog uprog;
struct sock_filter *code = NULL;
- int len, err;
+ int len;
if (copy_from_user(&uprog, arg, sizeof(uprog)))
return -EFAULT;
@@ -554,12 +554,6 @@
if (IS_ERR(code))
return PTR_ERR(code);
- err = sk_chk_filter(code, uprog.len);
- if (err) {
- kfree(code);
- return err;
- }
-
*p = code;
return uprog.len;
}
diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c
index 2ea7efd..6c9c16d 100644
--- a/drivers/net/ppp/pppoe.c
+++ b/drivers/net/ppp/pppoe.c
@@ -675,7 +675,7 @@
po->chan.hdrlen = (sizeof(struct pppoe_hdr) +
dev->hard_header_len);
- po->chan.mtu = dev->mtu - sizeof(struct pppoe_hdr);
+ po->chan.mtu = dev->mtu - sizeof(struct pppoe_hdr) - 2;
po->chan.private = sk;
po->chan.ops = &pppoe_chan_ops;
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index a3a0586..a4272ed 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -258,10 +258,8 @@
* so as not to drop characters on the floor.
*/
int curr_rx_urb_idx;
- u16 curr_rx_urb_offset;
u8 rx_urb_filled[MAX_RX_URBS];
struct tasklet_struct unthrottle_tasklet;
- struct work_struct retry_unthrottle_workqueue;
};
struct hso_device {
@@ -1252,14 +1250,6 @@
tasklet_hi_schedule(&serial->unthrottle_tasklet);
}
-static void hso_unthrottle_workfunc(struct work_struct *work)
-{
- struct hso_serial *serial =
- container_of(work, struct hso_serial,
- retry_unthrottle_workqueue);
- hso_unthrottle_tasklet(serial);
-}
-
/* open the requested serial port */
static int hso_serial_open(struct tty_struct *tty, struct file *filp)
{
@@ -1295,8 +1285,6 @@
tasklet_init(&serial->unthrottle_tasklet,
(void (*)(unsigned long))hso_unthrottle_tasklet,
(unsigned long)serial);
- INIT_WORK(&serial->retry_unthrottle_workqueue,
- hso_unthrottle_workfunc);
result = hso_start_serial_device(serial->parent, GFP_KERNEL);
if (result) {
hso_stop_serial_device(serial->parent);
@@ -1345,7 +1333,6 @@
if (!usb_gone)
hso_stop_serial_device(serial->parent);
tasklet_kill(&serial->unthrottle_tasklet);
- cancel_work_sync(&serial->retry_unthrottle_workqueue);
}
if (!usb_gone)
@@ -2013,8 +2000,7 @@
static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
{
struct tty_struct *tty;
- int write_length_remaining = 0;
- int curr_write_len;
+ int count;
/* Sanity check */
if (urb == NULL || serial == NULL) {
@@ -2024,29 +2010,28 @@
tty = tty_port_tty_get(&serial->port);
- /* Push data to tty */
- write_length_remaining = urb->actual_length -
- serial->curr_rx_urb_offset;
- D1("data to push to tty");
- while (write_length_remaining) {
- if (tty && test_bit(TTY_THROTTLED, &tty->flags)) {
- tty_kref_put(tty);
- return -1;
- }
- curr_write_len = tty_insert_flip_string(&serial->port,
- urb->transfer_buffer + serial->curr_rx_urb_offset,
- write_length_remaining);
- serial->curr_rx_urb_offset += curr_write_len;
- write_length_remaining -= curr_write_len;
- tty_flip_buffer_push(&serial->port);
+ if (tty && test_bit(TTY_THROTTLED, &tty->flags)) {
+ tty_kref_put(tty);
+ return -1;
}
+
+ /* Push data to tty */
+ D1("data to push to tty");
+ count = tty_buffer_request_room(&serial->port, urb->actual_length);
+ if (count >= urb->actual_length) {
+ tty_insert_flip_string(&serial->port, urb->transfer_buffer,
+ urb->actual_length);
+ tty_flip_buffer_push(&serial->port);
+ } else {
+ dev_warn(&serial->parent->usb->dev,
+ "dropping data, %d bytes lost\n", urb->actual_length);
+ }
+
tty_kref_put(tty);
- if (write_length_remaining == 0) {
- serial->curr_rx_urb_offset = 0;
- serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
- }
- return write_length_remaining;
+ serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
+
+ return 0;
}
@@ -2217,7 +2202,6 @@
}
}
serial->curr_rx_urb_idx = 0;
- serial->curr_rx_urb_offset = 0;
if (serial->tx_urb)
usb_kill_urb(serial->tx_urb);
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index cf62d7e..c4638c6 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -741,6 +741,7 @@
{QMI_FIXED_INTF(0x19d2, 0x1424, 2)},
{QMI_FIXED_INTF(0x19d2, 0x1425, 2)},
{QMI_FIXED_INTF(0x19d2, 0x1426, 2)}, /* ZTE MF91 */
+ {QMI_FIXED_INTF(0x19d2, 0x1428, 2)}, /* Telewell TW-LTE 4G v2 */
{QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */
{QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */
{QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 2543196..7bad2d3 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1359,7 +1359,7 @@
struct sk_buff_head seg_list;
struct sk_buff *segs, *nskb;
- features &= ~(NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO);
+ features &= ~(NETIF_F_SG | NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
segs = skb_gso_segment(skb, features);
if (IS_ERR(segs) || !segs)
goto drop;
@@ -3204,8 +3204,13 @@
struct r8152 *tp = netdev_priv(dev);
struct tally_counter tally;
+ if (usb_autopm_get_interface(tp->intf) < 0)
+ return;
+
generic_ocp_read(tp, PLA_TALLYCNT, sizeof(tally), &tally, MCU_TYPE_PLA);
+ usb_autopm_put_interface(tp->intf);
+
data[0] = le64_to_cpu(tally.tx_packets);
data[1] = le64_to_cpu(tally.rx_packets);
data[2] = le64_to_cpu(tally.tx_errors);
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 424db65e..d07bf4c 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1714,6 +1714,18 @@
return ret;
}
+static int smsc95xx_reset_resume(struct usb_interface *intf)
+{
+ struct usbnet *dev = usb_get_intfdata(intf);
+ int ret;
+
+ ret = smsc95xx_reset(dev);
+ if (ret < 0)
+ return ret;
+
+ return smsc95xx_resume(intf);
+}
+
static void smsc95xx_rx_csum_offload(struct sk_buff *skb)
{
skb->csum = *(u16 *)(skb_tail_pointer(skb) - 2);
@@ -2004,7 +2016,7 @@
.probe = usbnet_probe,
.suspend = smsc95xx_suspend,
.resume = smsc95xx_resume,
- .reset_resume = smsc95xx_resume,
+ .reset_resume = smsc95xx_reset_resume,
.disconnect = usbnet_disconnect,
.disable_hub_initiated_lpm = 1,
.supports_autosuspend = 1,
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 93ace04..1f04127 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -2363,7 +2363,7 @@
"FarSync TE1"
};
-static void
+static int
fst_init_card(struct fst_card_info *card)
{
int i;
@@ -2374,24 +2374,21 @@
* we'll have to revise it in some way then.
*/
for (i = 0; i < card->nports; i++) {
- err = register_hdlc_device(card->ports[i].dev);
- if (err < 0) {
- int j;
+ err = register_hdlc_device(card->ports[i].dev);
+ if (err < 0) {
pr_err("Cannot register HDLC device for port %d (errno %d)\n",
- i, -err);
- for (j = i; j < card->nports; j++) {
- free_netdev(card->ports[j].dev);
- card->ports[j].dev = NULL;
- }
- card->nports = i;
- break;
- }
+ i, -err);
+ while (i--)
+ unregister_hdlc_device(card->ports[i].dev);
+ return err;
+ }
}
pr_info("%s-%s: %s IRQ%d, %d ports\n",
port_to_dev(&card->ports[0])->name,
port_to_dev(&card->ports[card->nports - 1])->name,
type_strings[card->type], card->irq, card->nports);
+ return 0;
}
static const struct net_device_ops fst_ops = {
@@ -2447,15 +2444,12 @@
/* Try to enable the device */
if ((err = pci_enable_device(pdev)) != 0) {
pr_err("Failed to enable card. Err %d\n", -err);
- kfree(card);
- return err;
+ goto enable_fail;
}
if ((err = pci_request_regions(pdev, "FarSync")) !=0) {
pr_err("Failed to allocate regions. Err %d\n", -err);
- pci_disable_device(pdev);
- kfree(card);
- return err;
+ goto regions_fail;
}
/* Get virtual addresses of memory regions */
@@ -2464,30 +2458,21 @@
card->phys_ctlmem = pci_resource_start(pdev, 3);
if ((card->mem = ioremap(card->phys_mem, FST_MEMSIZE)) == NULL) {
pr_err("Physical memory remap failed\n");
- pci_release_regions(pdev);
- pci_disable_device(pdev);
- kfree(card);
- return -ENODEV;
+ err = -ENODEV;
+ goto ioremap_physmem_fail;
}
if ((card->ctlmem = ioremap(card->phys_ctlmem, 0x10)) == NULL) {
pr_err("Control memory remap failed\n");
- pci_release_regions(pdev);
- pci_disable_device(pdev);
- iounmap(card->mem);
- kfree(card);
- return -ENODEV;
+ err = -ENODEV;
+ goto ioremap_ctlmem_fail;
}
dbg(DBG_PCI, "kernel mem %p, ctlmem %p\n", card->mem, card->ctlmem);
/* Register the interrupt handler */
if (request_irq(pdev->irq, fst_intr, IRQF_SHARED, FST_DEV_NAME, card)) {
pr_err("Unable to register interrupt %d\n", card->irq);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
- iounmap(card->ctlmem);
- iounmap(card->mem);
- kfree(card);
- return -ENODEV;
+ err = -ENODEV;
+ goto irq_fail;
}
/* Record info we need */
@@ -2513,13 +2498,8 @@
while (i--)
free_netdev(card->ports[i].dev);
pr_err("FarSync: out of memory\n");
- free_irq(card->irq, card);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
- iounmap(card->ctlmem);
- iounmap(card->mem);
- kfree(card);
- return -ENODEV;
+ err = -ENOMEM;
+ goto hdlcdev_fail;
}
card->ports[i].dev = dev;
card->ports[i].card = card;
@@ -2565,9 +2545,16 @@
pci_set_drvdata(pdev, card);
/* Remainder of card setup */
+ if (no_of_cards_added >= FST_MAX_CARDS) {
+ pr_err("FarSync: too many cards\n");
+ err = -ENOMEM;
+ goto card_array_fail;
+ }
fst_card_array[no_of_cards_added] = card;
card->card_no = no_of_cards_added++; /* Record instance and bump it */
- fst_init_card(card);
+ err = fst_init_card(card);
+ if (err)
+ goto init_card_fail;
if (card->family == FST_FAMILY_TXU) {
/*
* Allocate a dma buffer for transmit and receives
@@ -2577,29 +2564,46 @@
&card->rx_dma_handle_card);
if (card->rx_dma_handle_host == NULL) {
pr_err("Could not allocate rx dma buffer\n");
- fst_disable_intr(card);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
- iounmap(card->ctlmem);
- iounmap(card->mem);
- kfree(card);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto rx_dma_fail;
}
card->tx_dma_handle_host =
pci_alloc_consistent(card->device, FST_MAX_MTU,
&card->tx_dma_handle_card);
if (card->tx_dma_handle_host == NULL) {
pr_err("Could not allocate tx dma buffer\n");
- fst_disable_intr(card);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
- iounmap(card->ctlmem);
- iounmap(card->mem);
- kfree(card);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto tx_dma_fail;
}
}
return 0; /* Success */
+
+tx_dma_fail:
+ pci_free_consistent(card->device, FST_MAX_MTU,
+ card->rx_dma_handle_host,
+ card->rx_dma_handle_card);
+rx_dma_fail:
+ fst_disable_intr(card);
+ for (i = 0 ; i < card->nports ; i++)
+ unregister_hdlc_device(card->ports[i].dev);
+init_card_fail:
+ fst_card_array[card->card_no] = NULL;
+card_array_fail:
+ for (i = 0 ; i < card->nports ; i++)
+ free_netdev(card->ports[i].dev);
+hdlcdev_fail:
+ free_irq(card->irq, card);
+irq_fail:
+ iounmap(card->ctlmem);
+ioremap_ctlmem_fail:
+ iounmap(card->mem);
+ioremap_physmem_fail:
+ pci_release_regions(pdev);
+regions_fail:
+ pci_disable_device(pdev);
+enable_fail:
+ kfree(card);
+ return err;
}
/*
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 82017f5..e6c56c5 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -795,7 +795,11 @@
if (status)
goto err_htc_stop;
- ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1;
+ if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+ ar->free_vdev_map = (1 << TARGET_10X_NUM_VDEVS) - 1;
+ else
+ ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1;
+
INIT_LIST_HEAD(&ar->arvifs);
if (!test_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags))
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 6c102b1..eebc860 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -312,7 +312,6 @@
int msdu_len, msdu_chaining = 0;
struct sk_buff *msdu;
struct htt_rx_desc *rx_desc;
- bool corrupted = false;
lockdep_assert_held(&htt->rx_ring.lock);
@@ -439,9 +438,6 @@
last_msdu = __le32_to_cpu(rx_desc->msdu_end.info0) &
RX_MSDU_END_INFO0_LAST_MSDU;
- if (msdu_chaining && !last_msdu)
- corrupted = true;
-
if (last_msdu) {
msdu->next = NULL;
break;
@@ -457,20 +453,6 @@
msdu_chaining = -1;
/*
- * Apparently FW sometimes reports weird chained MSDU sequences with
- * more than one rx descriptor. This seems like a bug but needs more
- * analyzing. For the time being fix it by dropping such sequences to
- * avoid blowing up the host system.
- */
- if (corrupted) {
- ath10k_warn("failed to pop chained msdus, dropping\n");
- ath10k_htt_rx_free_msdu_chain(*head_msdu);
- *head_msdu = NULL;
- *tail_msdu = NULL;
- msdu_chaining = -EINVAL;
- }
-
- /*
* Don't refill the ring yet.
*
* First, the elements popped here are still in use - it is not
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index 6db51a6..d06fcb0 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -1184,8 +1184,6 @@
bus->bus_priv.usb = bus_pub;
dev_set_drvdata(dev, bus);
bus->ops = &brcmf_usb_bus_ops;
- bus->chip = bus_pub->devid;
- bus->chiprev = bus_pub->chiprev;
bus->proto_type = BRCMF_PROTO_BCDC;
bus->always_use_fws_queue = true;
@@ -1194,6 +1192,9 @@
if (ret)
goto fail;
}
+ bus->chip = bus_pub->devid;
+ bus->chiprev = bus_pub->chiprev;
+
/* request firmware here */
brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL,
brcmf_usb_probe_phase2);
diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c
index ed50de6..6dc5dd3 100644
--- a/drivers/net/wireless/iwlwifi/dvm/rxon.c
+++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c
@@ -1068,13 +1068,6 @@
/* recalculate basic rates */
iwl_calc_basic_rates(priv, ctx);
- /*
- * force CTS-to-self frames protection if RTS-CTS is not preferred
- * one aggregation protection method
- */
- if (!priv->hw_params.use_rts_for_aggregation)
- ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
-
if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
!(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
@@ -1480,11 +1473,6 @@
else
ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
- if (bss_conf->use_cts_prot)
- ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
- else
- ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
-
memcpy(ctx->staging.bssid_addr, bss_conf->bssid, ETH_ALEN);
if (vif->type == NL80211_IFTYPE_AP ||
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index 0aa7c00..b1a3332 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -88,6 +88,7 @@
* P2P client interfaces simultaneously if they are in different bindings.
* @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and
* P2P client interfaces simultaneously if they are in same bindings.
+ * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
* @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
* @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
* @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
index 8b53027..725ba49 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
@@ -667,10 +667,9 @@
if (vif->bss_conf.qos)
cmd->qos_flags |= cpu_to_le32(MAC_QOS_FLG_UPDATE_EDCA);
- if (vif->bss_conf.use_cts_prot) {
+ if (vif->bss_conf.use_cts_prot)
cmd->protection_flags |= cpu_to_le32(MAC_PROT_FLG_TGG_PROTECT);
- cmd->protection_flags |= cpu_to_le32(MAC_PROT_FLG_SELF_CTS_EN);
- }
+
IWL_DEBUG_RATE(mvm, "use_cts_prot %d, ht_operation_mode %d\n",
vif->bss_conf.use_cts_prot,
vif->bss_conf.ht_operation_mode);
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 7215f59..9bfb906 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -303,6 +303,13 @@
hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP;
}
+ if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT &&
+ !iwlwifi_mod_params.uapsd_disable) {
+ hw->flags |= IEEE80211_HW_SUPPORTS_UAPSD;
+ hw->uapsd_queues = IWL_UAPSD_AC_INFO;
+ hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP;
+ }
+
hw->sta_data_size = sizeof(struct iwl_mvm_sta);
hw->vif_data_size = sizeof(struct iwl_mvm_vif);
hw->chanctx_data_size = sizeof(u16);
@@ -1159,8 +1166,12 @@
bcast_mac = &cmd->macs[mvmvif->id];
- /* enable filtering only for associated stations */
- if (vif->type != NL80211_IFTYPE_STATION || !vif->bss_conf.assoc)
+ /*
+ * enable filtering only for associated stations, but not for P2P
+ * Clients
+ */
+ if (vif->type != NL80211_IFTYPE_STATION || vif->p2p ||
+ !vif->bss_conf.assoc)
return;
bcast_mac->default_discard = 1;
@@ -1237,10 +1248,6 @@
if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BCAST_FILTERING))
return 0;
- /* bcast filtering isn't supported for P2P client */
- if (vif->p2p)
- return 0;
-
if (!iwl_mvm_bcast_filter_build_cmd(mvm, &cmd))
return 0;
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 4b6c7d4..eac2b42 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -588,9 +588,7 @@
struct iwl_scan_offload_cmd *scan,
struct iwl_mvm_scan_params *params)
{
- scan->channel_count =
- mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels +
- mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels;
+ scan->channel_count = req->n_channels;
scan->quiet_time = cpu_to_le16(IWL_ACTIVE_QUIET_TIME);
scan->quiet_plcp_th = cpu_to_le16(IWL_PLCP_QUIET_THRESH);
scan->good_CRC_th = IWL_GOOD_CRC_TH_DEFAULT;
@@ -669,61 +667,37 @@
struct cfg80211_sched_scan_request *req,
struct iwl_scan_channel_cfg *channels,
enum ieee80211_band band,
- int *head, int *tail,
+ int *head,
u32 ssid_bitmap,
struct iwl_mvm_scan_params *params)
{
- struct ieee80211_supported_band *s_band;
- int n_channels = req->n_channels;
- int i, j, index = 0;
- bool partial;
+ int i, index = 0;
- /*
- * We have to configure all supported channels, even if we don't want to
- * scan on them, but we have to send channels in the order that we want
- * to scan. So add requested channels to head of the list and others to
- * the end.
- */
- s_band = &mvm->nvm_data->bands[band];
+ for (i = 0; i < req->n_channels; i++) {
+ struct ieee80211_channel *chan = req->channels[i];
- for (i = 0; i < s_band->n_channels && *head <= *tail; i++) {
- partial = false;
- for (j = 0; j < n_channels; j++)
- if (s_band->channels[i].center_freq ==
- req->channels[j]->center_freq) {
- index = *head;
- (*head)++;
- /*
- * Channels that came with the request will be
- * in partial scan .
- */
- partial = true;
- break;
- }
- if (!partial) {
- index = *tail;
- (*tail)--;
- }
- channels->channel_number[index] =
- cpu_to_le16(ieee80211_frequency_to_channel(
- s_band->channels[i].center_freq));
+ if (chan->band != band)
+ continue;
+
+ index = *head;
+ (*head)++;
+
+ channels->channel_number[index] = cpu_to_le16(chan->hw_value);
channels->dwell_time[index][0] = params->dwell[band].active;
channels->dwell_time[index][1] = params->dwell[band].passive;
channels->iter_count[index] = cpu_to_le16(1);
channels->iter_interval[index] = 0;
- if (!(s_band->channels[i].flags & IEEE80211_CHAN_NO_IR))
+ if (!(chan->flags & IEEE80211_CHAN_NO_IR))
channels->type[index] |=
cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_ACTIVE);
channels->type[index] |=
- cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_FULL);
- if (partial)
- channels->type[index] |=
- cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_PARTIAL);
+ cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_FULL |
+ IWL_SCAN_OFFLOAD_CHANNEL_PARTIAL);
- if (s_band->channels[i].flags & IEEE80211_CHAN_NO_HT40)
+ if (chan->flags & IEEE80211_CHAN_NO_HT40)
channels->type[index] |=
cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_NARROW);
@@ -740,7 +714,6 @@
int band_2ghz = mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels;
int band_5ghz = mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels;
int head = 0;
- int tail = band_2ghz + band_5ghz - 1;
u32 ssid_bitmap;
int cmd_len;
int ret;
@@ -772,7 +745,7 @@
&scan_cfg->scan_cmd.tx_cmd[0],
scan_cfg->data);
iwl_build_channel_cfg(mvm, req, &scan_cfg->channel_cfg,
- IEEE80211_BAND_2GHZ, &head, &tail,
+ IEEE80211_BAND_2GHZ, &head,
ssid_bitmap, ¶ms);
}
if (band_5ghz) {
@@ -782,7 +755,7 @@
scan_cfg->data +
SCAN_OFFLOAD_PROBE_REQ_SIZE);
iwl_build_channel_cfg(mvm, req, &scan_cfg->channel_cfg,
- IEEE80211_BAND_5GHZ, &head, &tail,
+ IEEE80211_BAND_5GHZ, &head,
ssid_bitmap, ¶ms);
}
diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c
index 7091a18..98950e4 100644
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@ -367,6 +367,7 @@
{IWL_PCI_DEVICE(0x095A, 0x5012, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5412, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5410, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x5510, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5400, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x1010, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5000, iwl7265_2n_cfg)},
@@ -380,7 +381,7 @@
{IWL_PCI_DEVICE(0x095A, 0x9110, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9112, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)},
- {IWL_PCI_DEVICE(0x095A, 0x9200, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095B, 0x9200, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9510, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9310, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9410, iwl7265_2ac_cfg)},
diff --git a/drivers/net/wireless/mwifiex/11n_aggr.c b/drivers/net/wireless/mwifiex/11n_aggr.c
index 5b32106..fe0f66f 100644
--- a/drivers/net/wireless/mwifiex/11n_aggr.c
+++ b/drivers/net/wireless/mwifiex/11n_aggr.c
@@ -185,6 +185,7 @@
skb_reserve(skb_aggr, headroom + sizeof(struct txpd));
tx_info_aggr = MWIFIEX_SKB_TXCB(skb_aggr);
+ memset(tx_info_aggr, 0, sizeof(*tx_info_aggr));
tx_info_aggr->bss_type = tx_info_src->bss_type;
tx_info_aggr->bss_num = tx_info_src->bss_num;
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index e95dec9..b511613 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -220,6 +220,7 @@
}
tx_info = MWIFIEX_SKB_TXCB(skb);
+ memset(tx_info, 0, sizeof(*tx_info));
tx_info->bss_num = priv->bss_num;
tx_info->bss_type = priv->bss_type;
tx_info->pkt_len = pkt_len;
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 8dee6c8..c161141 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -453,6 +453,7 @@
if (skb) {
rx_info = MWIFIEX_SKB_RXCB(skb);
+ memset(rx_info, 0, sizeof(*rx_info));
rx_info->bss_num = priv->bss_num;
rx_info->bss_type = priv->bss_type;
}
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index cbabc12..e91cd0f 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -645,6 +645,7 @@
}
tx_info = MWIFIEX_SKB_TXCB(skb);
+ memset(tx_info, 0, sizeof(*tx_info));
tx_info->bss_num = priv->bss_num;
tx_info->bss_type = priv->bss_type;
tx_info->pkt_len = skb->len;
diff --git a/drivers/net/wireless/mwifiex/sta_tx.c b/drivers/net/wireless/mwifiex/sta_tx.c
index 5fce7e7..70eb863 100644
--- a/drivers/net/wireless/mwifiex/sta_tx.c
+++ b/drivers/net/wireless/mwifiex/sta_tx.c
@@ -150,6 +150,7 @@
return -1;
tx_info = MWIFIEX_SKB_TXCB(skb);
+ memset(tx_info, 0, sizeof(*tx_info));
tx_info->bss_num = priv->bss_num;
tx_info->bss_type = priv->bss_type;
tx_info->pkt_len = data_len - (sizeof(struct txpd) + INTF_HEADER_LEN);
diff --git a/drivers/net/wireless/mwifiex/tdls.c b/drivers/net/wireless/mwifiex/tdls.c
index e73034f..0e88364 100644
--- a/drivers/net/wireless/mwifiex/tdls.c
+++ b/drivers/net/wireless/mwifiex/tdls.c
@@ -605,6 +605,7 @@
}
tx_info = MWIFIEX_SKB_TXCB(skb);
+ memset(tx_info, 0, sizeof(*tx_info));
tx_info->bss_num = priv->bss_num;
tx_info->bss_type = priv->bss_type;
@@ -760,6 +761,7 @@
skb->priority = MWIFIEX_PRIO_VI;
tx_info = MWIFIEX_SKB_TXCB(skb);
+ memset(tx_info, 0, sizeof(*tx_info));
tx_info->bss_num = priv->bss_num;
tx_info->bss_type = priv->bss_type;
tx_info->flags |= MWIFIEX_BUF_FLAG_TDLS_PKT;
diff --git a/drivers/net/wireless/mwifiex/txrx.c b/drivers/net/wireless/mwifiex/txrx.c
index 37f26af..fd7e5b9 100644
--- a/drivers/net/wireless/mwifiex/txrx.c
+++ b/drivers/net/wireless/mwifiex/txrx.c
@@ -55,6 +55,7 @@
return -1;
}
+ memset(rx_info, 0, sizeof(*rx_info));
rx_info->bss_num = priv->bss_num;
rx_info->bss_type = priv->bss_type;
diff --git a/drivers/net/wireless/mwifiex/uap_txrx.c b/drivers/net/wireless/mwifiex/uap_txrx.c
index 9a56bc6..b0601b9 100644
--- a/drivers/net/wireless/mwifiex/uap_txrx.c
+++ b/drivers/net/wireless/mwifiex/uap_txrx.c
@@ -175,6 +175,7 @@
}
tx_info = MWIFIEX_SKB_TXCB(skb);
+ memset(tx_info, 0, sizeof(*tx_info));
tx_info->bss_num = priv->bss_num;
tx_info->bss_type = priv->bss_type;
tx_info->flags |= MWIFIEX_BUF_FLAG_BRIDGED_PKT;
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index e11dab2..832006b 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -231,9 +231,12 @@
*/
static int rt2800usb_autorun_detect(struct rt2x00_dev *rt2x00dev)
{
- __le32 reg;
+ __le32 *reg;
u32 fw_mode;
+ reg = kmalloc(sizeof(*reg), GFP_KERNEL);
+ if (reg == NULL)
+ return -ENOMEM;
/* cannot use rt2x00usb_register_read here as it uses different
* mode (MULTI_READ vs. DEVICE_MODE) and does not pass the
* magic value USB_MODE_AUTORUN (0x11) to the device, thus the
@@ -241,8 +244,9 @@
*/
rt2x00usb_vendor_request(rt2x00dev, USB_DEVICE_MODE,
USB_VENDOR_REQUEST_IN, 0, USB_MODE_AUTORUN,
- ®, sizeof(reg), REGISTER_TIMEOUT_FIRMWARE);
- fw_mode = le32_to_cpu(reg);
+ reg, sizeof(*reg), REGISTER_TIMEOUT_FIRMWARE);
+ fw_mode = le32_to_cpu(*reg);
+ kfree(reg);
if ((fw_mode & 0x00000003) == 2)
return 1;
@@ -261,6 +265,7 @@
int status;
u32 offset;
u32 length;
+ int retval;
/*
* Check which section of the firmware we need.
@@ -278,7 +283,10 @@
/*
* Write firmware to device.
*/
- if (rt2800usb_autorun_detect(rt2x00dev)) {
+ retval = rt2800usb_autorun_detect(rt2x00dev);
+ if (retval < 0)
+ return retval;
+ if (retval) {
rt2x00_info(rt2x00dev,
"Firmware loading not required - NIC in AutoRun mode\n");
} else {
@@ -763,7 +771,12 @@
*/
static int rt2800usb_efuse_detect(struct rt2x00_dev *rt2x00dev)
{
- if (rt2800usb_autorun_detect(rt2x00dev))
+ int retval;
+
+ retval = rt2800usb_autorun_detect(rt2x00dev);
+ if (retval < 0)
+ return retval;
+ if (retval)
return 1;
return rt2800_efuse_detect(rt2x00dev);
}
@@ -772,7 +785,10 @@
{
int retval;
- if (rt2800usb_efuse_detect(rt2x00dev))
+ retval = rt2800usb_efuse_detect(rt2x00dev);
+ if (retval < 0)
+ return retval;
+ if (retval)
retval = rt2800_read_eeprom_efuse(rt2x00dev);
else
retval = rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 2ccb4a0..055222b 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1439,16 +1439,11 @@
unsigned int i = 0;
unsigned int num_queues = info->netdev->real_num_tx_queues;
+ netif_carrier_off(info->netdev);
+
for (i = 0; i < num_queues; ++i) {
struct netfront_queue *queue = &info->queues[i];
- /* Stop old i/f to prevent errors whilst we rebuild the state. */
- spin_lock_bh(&queue->rx_lock);
- spin_lock_irq(&queue->tx_lock);
- netif_carrier_off(queue->info->netdev);
- spin_unlock_irq(&queue->tx_lock);
- spin_unlock_bh(&queue->rx_lock);
-
if (queue->tx_irq && (queue->tx_irq == queue->rx_irq))
unbind_from_irqhandler(queue->tx_irq, queue);
if (queue->tx_irq && (queue->tx_irq != queue->rx_irq)) {
@@ -1458,6 +1453,8 @@
queue->tx_evtchn = queue->rx_evtchn = 0;
queue->tx_irq = queue->rx_irq = 0;
+ napi_synchronize(&queue->napi);
+
/* End access and free the pages */
xennet_end_access(queue->tx_ring_ref, queue->tx.sring);
xennet_end_access(queue->rx_ring_ref, queue->rx.sring);
@@ -2046,13 +2043,15 @@
/* By now, the queue structures have been set up */
for (j = 0; j < num_queues; ++j) {
queue = &np->queues[j];
- spin_lock_bh(&queue->rx_lock);
- spin_lock_irq(&queue->tx_lock);
/* Step 1: Discard all pending TX packet fragments. */
+ spin_lock_irq(&queue->tx_lock);
xennet_release_tx_bufs(queue);
+ spin_unlock_irq(&queue->tx_lock);
/* Step 2: Rebuild the RX buffer freelist and the RX ring itself. */
+ spin_lock_bh(&queue->rx_lock);
+
for (requeue_idx = 0, i = 0; i < NET_RX_RING_SIZE; i++) {
skb_frag_t *frag;
const struct page *page;
@@ -2076,6 +2075,8 @@
}
queue->rx.req_prod_pvt = requeue_idx;
+
+ spin_unlock_bh(&queue->rx_lock);
}
/*
@@ -2087,13 +2088,17 @@
netif_carrier_on(np->netdev);
for (j = 0; j < num_queues; ++j) {
queue = &np->queues[j];
+
notify_remote_via_irq(queue->tx_irq);
if (queue->tx_irq != queue->rx_irq)
notify_remote_via_irq(queue->rx_irq);
- xennet_tx_buf_gc(queue);
- xennet_alloc_rx_buffers(queue);
+ spin_lock_irq(&queue->tx_lock);
+ xennet_tx_buf_gc(queue);
spin_unlock_irq(&queue->tx_lock);
+
+ spin_lock_bh(&queue->rx_lock);
+ xennet_alloc_rx_buffers(queue);
spin_unlock_bh(&queue->rx_lock);
}
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index a3bf212..401b245 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -182,40 +182,6 @@
}
EXPORT_SYMBOL(of_mdiobus_register);
-/**
- * of_mdiobus_link_phydev - Find a device node for a phy
- * @mdio: pointer to mii_bus structure
- * @phydev: phydev for which the of_node pointer should be set
- *
- * Walk the list of subnodes of a mdio bus and look for a node that matches the
- * phy's address with its 'reg' property. If found, set the of_node pointer for
- * the phy. This allows auto-probed pyh devices to be supplied with information
- * passed in via DT.
- */
-void of_mdiobus_link_phydev(struct mii_bus *mdio,
- struct phy_device *phydev)
-{
- struct device *dev = &phydev->dev;
- struct device_node *child;
-
- if (dev->of_node || !mdio->dev.of_node)
- return;
-
- for_each_available_child_of_node(mdio->dev.of_node, child) {
- int addr;
-
- addr = of_mdio_parse_addr(&mdio->dev, child);
- if (addr < 0)
- continue;
-
- if (addr == phydev->addr) {
- dev->of_node = child;
- return;
- }
- }
-}
-EXPORT_SYMBOL(of_mdiobus_link_phydev);
-
/* Helper function for of_phy_find_device */
static int of_phy_match(struct device *dev, void *phy_np)
{
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 9d2b673..b8125aa 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1169,8 +1169,8 @@
if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
cap |= QH_IOS;
- if (hwep->num)
- cap |= QH_ZLT;
+
+ cap |= QH_ZLT;
cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
/*
* For ISO-TX, we set mult at QH as the largest value, and use
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 21b99b4..0e950ad 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -889,6 +889,25 @@
if (!hub_is_superspeed(hub->hdev))
return -EINVAL;
+ ret = hub_port_status(hub, port1, &portstatus, &portchange);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * USB controller Advanced Micro Devices, Inc. [AMD] FCH USB XHCI
+ * Controller [1022:7814] will have spurious result making the following
+ * usb 3.0 device hotplugging route to the 2.0 root hub and recognized
+ * as high-speed device if we set the usb 3.0 port link state to
+ * Disabled. Since it's already in USB_SS_PORT_LS_RX_DETECT state, we
+ * check the state here to avoid the bug.
+ */
+ if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+ USB_SS_PORT_LS_RX_DETECT) {
+ dev_dbg(&hub->ports[port1 - 1]->dev,
+ "Not disabling port; link state is RxDetect\n");
+ return ret;
+ }
+
ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED);
if (ret)
return ret;
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index b7a506f..5c660c7 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -426,20 +426,18 @@
* p2m are consistent.
*/
if (!xen_feature(XENFEAT_auto_translated_physmap)) {
- unsigned long p;
- struct page *scratch_page = get_balloon_scratch_page();
-
if (!PageHighMem(page)) {
+ struct page *scratch_page = get_balloon_scratch_page();
+
ret = HYPERVISOR_update_va_mapping(
(unsigned long)__va(pfn << PAGE_SHIFT),
pfn_pte(page_to_pfn(scratch_page),
PAGE_KERNEL_RO), 0);
BUG_ON(ret);
- }
- p = page_to_pfn(scratch_page);
- __set_phys_to_machine(pfn, pfn_to_mfn(p));
- put_balloon_scratch_page();
+ put_balloon_scratch_page();
+ }
+ __set_phys_to_machine(pfn, INVALID_P2M_ENTRY);
}
#endif
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index c3667b2..5f1e1f3 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -88,7 +88,6 @@
if (!si->cancelled) {
xen_irq_resume();
- xen_console_resume();
xen_timer_resume();
}
@@ -135,6 +134,10 @@
err = stop_machine(xen_suspend, &si, cpumask_of(0));
+ /* Resume console as early as possible. */
+ if (!si.cancelled)
+ xen_console_resume();
+
raw_notifier_call_chain(&xen_resume_notifier, 0, NULL);
dpm_resume_start(si.cancelled ? PMSG_THAW : PMSG_RESTORE);
diff --git a/fs/aio.c b/fs/aio.c
index 955947e..1c9c5f0 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -830,16 +830,20 @@
static void put_reqs_available(struct kioctx *ctx, unsigned nr)
{
struct kioctx_cpu *kcpu;
+ unsigned long flags;
preempt_disable();
kcpu = this_cpu_ptr(ctx->cpu);
+ local_irq_save(flags);
kcpu->reqs_available += nr;
+
while (kcpu->reqs_available >= ctx->req_batch * 2) {
kcpu->reqs_available -= ctx->req_batch;
atomic_add(ctx->req_batch, &ctx->reqs_available);
}
+ local_irq_restore(flags);
preempt_enable();
}
@@ -847,10 +851,12 @@
{
struct kioctx_cpu *kcpu;
bool ret = false;
+ unsigned long flags;
preempt_disable();
kcpu = this_cpu_ptr(ctx->cpu);
+ local_irq_save(flags);
if (!kcpu->reqs_available) {
int old, avail = atomic_read(&ctx->reqs_available);
@@ -869,6 +875,7 @@
ret = true;
kcpu->reqs_available--;
out:
+ local_irq_restore(flags);
preempt_enable();
return ret;
}
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index e12441c..7187b14 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -484,8 +484,19 @@
log_list);
list_del_init(&ordered->log_list);
spin_unlock_irq(&log->log_extents_lock[index]);
+
+ if (!test_bit(BTRFS_ORDERED_IO_DONE, &ordered->flags) &&
+ !test_bit(BTRFS_ORDERED_DIRECT, &ordered->flags)) {
+ struct inode *inode = ordered->inode;
+ u64 start = ordered->file_offset;
+ u64 end = ordered->file_offset + ordered->len - 1;
+
+ WARN_ON(!inode);
+ filemap_fdatawrite_range(inode->i_mapping, start, end);
+ }
wait_event(ordered->wait, test_bit(BTRFS_ORDERED_IO_DONE,
&ordered->flags));
+
btrfs_put_ordered_extent(ordered);
spin_lock_irq(&log->log_extents_lock[index]);
}
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 6104676..6cb82f6 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1680,11 +1680,11 @@
if (device->bdev == root->fs_info->fs_devices->latest_bdev)
root->fs_info->fs_devices->latest_bdev = next_device->bdev;
- if (device->bdev)
+ if (device->bdev) {
device->fs_devices->open_devices--;
-
- /* remove sysfs entry */
- btrfs_kobj_rm_device(root->fs_info, device);
+ /* remove sysfs entry */
+ btrfs_kobj_rm_device(root->fs_info, device);
+ }
call_rcu(&device->rcu, free_device);
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 098f97b..ca88731 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -643,9 +643,8 @@
unsigned long seglen;
unsigned long addr;
struct page *pg;
- void *mapaddr;
- void *buf;
unsigned len;
+ unsigned offset;
unsigned move_pages:1;
};
@@ -666,23 +665,17 @@
if (cs->currbuf) {
struct pipe_buffer *buf = cs->currbuf;
- if (!cs->write) {
- kunmap_atomic(cs->mapaddr);
- } else {
- kunmap_atomic(cs->mapaddr);
+ if (cs->write)
buf->len = PAGE_SIZE - cs->len;
- }
cs->currbuf = NULL;
- cs->mapaddr = NULL;
- } else if (cs->mapaddr) {
- kunmap_atomic(cs->mapaddr);
+ } else if (cs->pg) {
if (cs->write) {
flush_dcache_page(cs->pg);
set_page_dirty_lock(cs->pg);
}
put_page(cs->pg);
- cs->mapaddr = NULL;
}
+ cs->pg = NULL;
}
/*
@@ -691,7 +684,7 @@
*/
static int fuse_copy_fill(struct fuse_copy_state *cs)
{
- unsigned long offset;
+ struct page *page;
int err;
unlock_request(cs->fc, cs->req);
@@ -706,14 +699,12 @@
BUG_ON(!cs->nr_segs);
cs->currbuf = buf;
- cs->mapaddr = kmap_atomic(buf->page);
+ cs->pg = buf->page;
+ cs->offset = buf->offset;
cs->len = buf->len;
- cs->buf = cs->mapaddr + buf->offset;
cs->pipebufs++;
cs->nr_segs--;
} else {
- struct page *page;
-
if (cs->nr_segs == cs->pipe->buffers)
return -EIO;
@@ -726,8 +717,8 @@
buf->len = 0;
cs->currbuf = buf;
- cs->mapaddr = kmap_atomic(page);
- cs->buf = cs->mapaddr;
+ cs->pg = page;
+ cs->offset = 0;
cs->len = PAGE_SIZE;
cs->pipebufs++;
cs->nr_segs++;
@@ -740,14 +731,13 @@
cs->iov++;
cs->nr_segs--;
}
- err = get_user_pages_fast(cs->addr, 1, cs->write, &cs->pg);
+ err = get_user_pages_fast(cs->addr, 1, cs->write, &page);
if (err < 0)
return err;
BUG_ON(err != 1);
- offset = cs->addr % PAGE_SIZE;
- cs->mapaddr = kmap_atomic(cs->pg);
- cs->buf = cs->mapaddr + offset;
- cs->len = min(PAGE_SIZE - offset, cs->seglen);
+ cs->pg = page;
+ cs->offset = cs->addr % PAGE_SIZE;
+ cs->len = min(PAGE_SIZE - cs->offset, cs->seglen);
cs->seglen -= cs->len;
cs->addr += cs->len;
}
@@ -760,15 +750,20 @@
{
unsigned ncpy = min(*size, cs->len);
if (val) {
+ void *pgaddr = kmap_atomic(cs->pg);
+ void *buf = pgaddr + cs->offset;
+
if (cs->write)
- memcpy(cs->buf, *val, ncpy);
+ memcpy(buf, *val, ncpy);
else
- memcpy(*val, cs->buf, ncpy);
+ memcpy(*val, buf, ncpy);
+
+ kunmap_atomic(pgaddr);
*val += ncpy;
}
*size -= ncpy;
cs->len -= ncpy;
- cs->buf += ncpy;
+ cs->offset += ncpy;
return ncpy;
}
@@ -874,8 +869,8 @@
out_fallback_unlock:
unlock_page(newpage);
out_fallback:
- cs->mapaddr = kmap_atomic(buf->page);
- cs->buf = cs->mapaddr + buf->offset;
+ cs->pg = buf->page;
+ cs->offset = buf->offset;
err = lock_request(cs->fc, cs->req);
if (err)
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 4219835..0c60482 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -198,7 +198,8 @@
inode = ACCESS_ONCE(entry->d_inode);
if (inode && is_bad_inode(inode))
goto invalid;
- else if (fuse_dentry_time(entry) < get_jiffies_64()) {
+ else if (time_before64(fuse_dentry_time(entry), get_jiffies_64()) ||
+ (flags & LOOKUP_REVAL)) {
int err;
struct fuse_entry_out outarg;
struct fuse_req *req;
@@ -814,13 +815,6 @@
return err;
}
-static int fuse_rename(struct inode *olddir, struct dentry *oldent,
- struct inode *newdir, struct dentry *newent)
-{
- return fuse_rename_common(olddir, oldent, newdir, newent, 0,
- FUSE_RENAME, sizeof(struct fuse_rename_in));
-}
-
static int fuse_rename2(struct inode *olddir, struct dentry *oldent,
struct inode *newdir, struct dentry *newent,
unsigned int flags)
@@ -831,17 +825,30 @@
if (flags & ~(RENAME_NOREPLACE | RENAME_EXCHANGE))
return -EINVAL;
- if (fc->no_rename2 || fc->minor < 23)
- return -EINVAL;
+ if (flags) {
+ if (fc->no_rename2 || fc->minor < 23)
+ return -EINVAL;
- err = fuse_rename_common(olddir, oldent, newdir, newent, flags,
- FUSE_RENAME2, sizeof(struct fuse_rename2_in));
- if (err == -ENOSYS) {
- fc->no_rename2 = 1;
- err = -EINVAL;
+ err = fuse_rename_common(olddir, oldent, newdir, newent, flags,
+ FUSE_RENAME2,
+ sizeof(struct fuse_rename2_in));
+ if (err == -ENOSYS) {
+ fc->no_rename2 = 1;
+ err = -EINVAL;
+ }
+ } else {
+ err = fuse_rename_common(olddir, oldent, newdir, newent, 0,
+ FUSE_RENAME,
+ sizeof(struct fuse_rename_in));
}
- return err;
+ return err;
+}
+
+static int fuse_rename(struct inode *olddir, struct dentry *oldent,
+ struct inode *newdir, struct dentry *newent)
+{
+ return fuse_rename2(olddir, oldent, newdir, newent, 0);
}
static int fuse_link(struct dentry *entry, struct inode *newdir,
@@ -985,7 +992,7 @@
int err;
bool r;
- if (fi->i_time < get_jiffies_64()) {
+ if (time_before64(fi->i_time, get_jiffies_64())) {
r = true;
err = fuse_do_getattr(inode, stat, file);
} else {
@@ -1171,7 +1178,7 @@
((mask & MAY_EXEC) && S_ISREG(inode->i_mode))) {
struct fuse_inode *fi = get_fuse_inode(inode);
- if (fi->i_time < get_jiffies_64()) {
+ if (time_before64(fi->i_time, get_jiffies_64())) {
refreshed = true;
err = fuse_perm_getattr(inode, mask);
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 6e16dad..40ac262 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1687,7 +1687,7 @@
error = -EIO;
req->ff = fuse_write_file_get(fc, fi);
if (!req->ff)
- goto err_free;
+ goto err_nofile;
fuse_write_fill(req, req->ff, page_offset(page), 0);
@@ -1715,6 +1715,8 @@
return 0;
+err_nofile:
+ __free_page(tmp_page);
err_free:
fuse_request_free(req);
err:
@@ -1955,8 +1957,8 @@
data.ff = NULL;
err = -ENOMEM;
- data.orig_pages = kzalloc(sizeof(struct page *) *
- FUSE_MAX_PAGES_PER_REQ,
+ data.orig_pages = kcalloc(FUSE_MAX_PAGES_PER_REQ,
+ sizeof(struct page *),
GFP_NOFS);
if (!data.orig_pages)
goto out;
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 754dcf2..8474028 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -478,6 +478,17 @@
{OPT_ERR, NULL}
};
+static int fuse_match_uint(substring_t *s, unsigned int *res)
+{
+ int err = -ENOMEM;
+ char *buf = match_strdup(s);
+ if (buf) {
+ err = kstrtouint(buf, 10, res);
+ kfree(buf);
+ }
+ return err;
+}
+
static int parse_fuse_opt(char *opt, struct fuse_mount_data *d, int is_bdev)
{
char *p;
@@ -488,6 +499,7 @@
while ((p = strsep(&opt, ",")) != NULL) {
int token;
int value;
+ unsigned uv;
substring_t args[MAX_OPT_ARGS];
if (!*p)
continue;
@@ -511,18 +523,18 @@
break;
case OPT_USER_ID:
- if (match_int(&args[0], &value))
+ if (fuse_match_uint(&args[0], &uv))
return 0;
- d->user_id = make_kuid(current_user_ns(), value);
+ d->user_id = make_kuid(current_user_ns(), uv);
if (!uid_valid(d->user_id))
return 0;
d->user_id_present = 1;
break;
case OPT_GROUP_ID:
- if (match_int(&args[0], &value))
+ if (fuse_match_uint(&args[0], &uv))
return 0;
- d->group_id = make_kgid(current_user_ns(), value);
+ d->group_id = make_kgid(current_user_ns(), uv);
if (!gid_valid(d->group_id))
return 0;
d->group_id_present = 1;
@@ -1006,7 +1018,7 @@
sb->s_flags &= ~(MS_NOSEC | MS_I_VERSION);
- if (!parse_fuse_opt((char *) data, &d, is_bdev))
+ if (!parse_fuse_opt(data, &d, is_bdev))
goto err;
if (is_bdev) {
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index 4fc3a30..26b3f95 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -981,7 +981,7 @@
int error = 0;
state = (fl->fl_type == F_WRLCK) ? LM_ST_EXCLUSIVE : LM_ST_SHARED;
- flags = (IS_SETLKW(cmd) ? 0 : LM_FLAG_TRY) | GL_EXACT | GL_NOCACHE;
+ flags = (IS_SETLKW(cmd) ? 0 : LM_FLAG_TRY) | GL_EXACT;
mutex_lock(&fp->f_fl_mutex);
@@ -991,7 +991,7 @@
goto out;
flock_lock_file_wait(file,
&(struct file_lock){.fl_type = F_UNLCK});
- gfs2_glock_dq_wait(fl_gh);
+ gfs2_glock_dq(fl_gh);
gfs2_holder_reinit(state, flags, fl_gh);
} else {
error = gfs2_glock_get(GFS2_SB(&ip->i_inode), ip->i_no_addr,
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index c355f73..ee4e04f 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -731,14 +731,14 @@
cachep = gfs2_glock_aspace_cachep;
else
cachep = gfs2_glock_cachep;
- gl = kmem_cache_alloc(cachep, GFP_KERNEL);
+ gl = kmem_cache_alloc(cachep, GFP_NOFS);
if (!gl)
return -ENOMEM;
memset(&gl->gl_lksb, 0, sizeof(struct dlm_lksb));
if (glops->go_flags & GLOF_LVB) {
- gl->gl_lksb.sb_lvbptr = kzalloc(GFS2_MIN_LVB_SIZE, GFP_KERNEL);
+ gl->gl_lksb.sb_lvbptr = kzalloc(GFS2_MIN_LVB_SIZE, GFP_NOFS);
if (!gl->gl_lksb.sb_lvbptr) {
kmem_cache_free(cachep, gl);
return -ENOMEM;
@@ -1404,12 +1404,16 @@
gl = list_entry(list->next, struct gfs2_glock, gl_lru);
list_del_init(&gl->gl_lru);
if (!spin_trylock(&gl->gl_spin)) {
+add_back_to_lru:
list_add(&gl->gl_lru, &lru_list);
atomic_inc(&lru_count);
continue;
}
+ if (test_and_set_bit(GLF_LOCK, &gl->gl_flags)) {
+ spin_unlock(&gl->gl_spin);
+ goto add_back_to_lru;
+ }
clear_bit(GLF_LRU, &gl->gl_flags);
- spin_unlock(&lru_lock);
gl->gl_lockref.count++;
if (demote_ok(gl))
handle_callback(gl, LM_ST_UNLOCKED, 0, false);
@@ -1417,7 +1421,7 @@
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gl->gl_lockref.count--;
spin_unlock(&gl->gl_spin);
- spin_lock(&lru_lock);
+ cond_resched_lock(&lru_lock);
}
}
@@ -1442,7 +1446,7 @@
gl = list_entry(lru_list.next, struct gfs2_glock, gl_lru);
/* Test for being demotable */
- if (!test_and_set_bit(GLF_LOCK, &gl->gl_flags)) {
+ if (!test_bit(GLF_LOCK, &gl->gl_flags)) {
list_move(&gl->gl_lru, &dispose);
atomic_dec(&lru_count);
freed++;
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index fc11007..2ffc67d 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -234,8 +234,8 @@
* inode_go_inval - prepare a inode glock to be released
* @gl: the glock
* @flags:
- *
- * Normally we invlidate everything, but if we are moving into
+ *
+ * Normally we invalidate everything, but if we are moving into
* LM_ST_DEFERRED from LM_ST_SHARED or LM_ST_EXCLUSIVE then we
* can keep hold of the metadata, since it won't have changed.
*
diff --git a/fs/gfs2/lock_dlm.c b/fs/gfs2/lock_dlm.c
index 91f274d..4fafea1 100644
--- a/fs/gfs2/lock_dlm.c
+++ b/fs/gfs2/lock_dlm.c
@@ -1036,8 +1036,8 @@
new_size = old_size + RECOVER_SIZE_INC;
- submit = kzalloc(new_size * sizeof(uint32_t), GFP_NOFS);
- result = kzalloc(new_size * sizeof(uint32_t), GFP_NOFS);
+ submit = kcalloc(new_size, sizeof(uint32_t), GFP_NOFS);
+ result = kcalloc(new_size, sizeof(uint32_t), GFP_NOFS);
if (!submit || !result) {
kfree(submit);
kfree(result);
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index db629d1..f4cb9c0 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -337,7 +337,7 @@
/**
* gfs2_free_extlen - Return extent length of free blocks
- * @rbm: Starting position
+ * @rrbm: Starting position
* @len: Max length to check
*
* Starting at the block specified by the rbm, see how many free blocks
@@ -2522,7 +2522,7 @@
/**
* gfs2_rlist_free - free a resource group list
- * @list: the list of resource groups
+ * @rlist: the list of resource groups
*
*/
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index 8f98138..f11b9ee 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -756,7 +756,6 @@
spin_unlock(&dreq->lock);
while (!list_empty(&hdr->pages)) {
- bool do_destroy = true;
req = nfs_list_entry(hdr->pages.next);
nfs_list_remove_request(req);
@@ -765,7 +764,6 @@
case NFS_IOHDR_NEED_COMMIT:
kref_get(&req->wb_kref);
nfs_mark_request_commit(req, hdr->lseg, &cinfo);
- do_destroy = false;
}
nfs_unlock_and_release_request(req);
}
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index 82ddbf4..f415cbf 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -244,6 +244,7 @@
int nfs_generic_pgio(struct nfs_pageio_descriptor *, struct nfs_pgio_header *);
int nfs_initiate_pgio(struct rpc_clnt *, struct nfs_pgio_data *,
const struct rpc_call_ops *, int, int);
+void nfs_free_request(struct nfs_page *req);
static inline void nfs_iocounter_init(struct nfs_io_counter *c)
{
diff --git a/fs/nfs/nfs3acl.c b/fs/nfs/nfs3acl.c
index 871d6ed..8f854dd 100644
--- a/fs/nfs/nfs3acl.c
+++ b/fs/nfs/nfs3acl.c
@@ -247,3 +247,46 @@
&posix_acl_default_xattr_handler,
NULL,
};
+
+static int
+nfs3_list_one_acl(struct inode *inode, int type, const char *name, void *data,
+ size_t size, ssize_t *result)
+{
+ struct posix_acl *acl;
+ char *p = data + *result;
+
+ acl = get_acl(inode, type);
+ if (!acl)
+ return 0;
+
+ posix_acl_release(acl);
+
+ *result += strlen(name);
+ *result += 1;
+ if (!size)
+ return 0;
+ if (*result > size)
+ return -ERANGE;
+
+ strcpy(p, name);
+ return 0;
+}
+
+ssize_t
+nfs3_listxattr(struct dentry *dentry, char *data, size_t size)
+{
+ struct inode *inode = dentry->d_inode;
+ ssize_t result = 0;
+ int error;
+
+ error = nfs3_list_one_acl(inode, ACL_TYPE_ACCESS,
+ POSIX_ACL_XATTR_ACCESS, data, size, &result);
+ if (error)
+ return error;
+
+ error = nfs3_list_one_acl(inode, ACL_TYPE_DEFAULT,
+ POSIX_ACL_XATTR_DEFAULT, data, size, &result);
+ if (error)
+ return error;
+ return result;
+}
diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c
index e7daa42..f0afa29 100644
--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -885,7 +885,7 @@
.getattr = nfs_getattr,
.setattr = nfs_setattr,
#ifdef CONFIG_NFS_V3_ACL
- .listxattr = generic_listxattr,
+ .listxattr = nfs3_listxattr,
.getxattr = generic_getxattr,
.setxattr = generic_setxattr,
.removexattr = generic_removexattr,
@@ -899,7 +899,7 @@
.getattr = nfs_getattr,
.setattr = nfs_setattr,
#ifdef CONFIG_NFS_V3_ACL
- .listxattr = generic_listxattr,
+ .listxattr = nfs3_listxattr,
.getxattr = generic_getxattr,
.setxattr = generic_setxattr,
.removexattr = generic_removexattr,
diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index b6ee3a6..17fab89 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -29,8 +29,6 @@
static struct kmem_cache *nfs_page_cachep;
static const struct rpc_call_ops nfs_pgio_common_ops;
-static void nfs_free_request(struct nfs_page *);
-
static bool nfs_pgarray_set(struct nfs_page_array *p, unsigned int pagecount)
{
p->npages = pagecount;
@@ -239,20 +237,28 @@
WARN_ON_ONCE(prev == req);
if (!prev) {
+ /* a head request */
req->wb_head = req;
req->wb_this_page = req;
} else {
+ /* a subrequest */
WARN_ON_ONCE(prev->wb_this_page != prev->wb_head);
WARN_ON_ONCE(!test_bit(PG_HEADLOCK, &prev->wb_head->wb_flags));
req->wb_head = prev->wb_head;
req->wb_this_page = prev->wb_this_page;
prev->wb_this_page = req;
+ /* All subrequests take a ref on the head request until
+ * nfs_page_group_destroy is called */
+ kref_get(&req->wb_head->wb_kref);
+
/* grab extra ref if head request has extra ref from
* the write/commit path to handle handoff between write
* and commit lists */
- if (test_bit(PG_INODE_REF, &prev->wb_head->wb_flags))
+ if (test_bit(PG_INODE_REF, &prev->wb_head->wb_flags)) {
+ set_bit(PG_INODE_REF, &req->wb_flags);
kref_get(&req->wb_kref);
+ }
}
}
@@ -269,6 +275,10 @@
struct nfs_page *req = container_of(kref, struct nfs_page, wb_kref);
struct nfs_page *tmp, *next;
+ /* subrequests must release the ref on the head request */
+ if (req->wb_head != req)
+ nfs_release_request(req->wb_head);
+
if (!nfs_page_group_sync_on_bit(req, PG_TEARDOWN))
return;
@@ -394,7 +404,7 @@
*
* Note: Should never be called with the spinlock held!
*/
-static void nfs_free_request(struct nfs_page *req)
+void nfs_free_request(struct nfs_page *req)
{
WARN_ON_ONCE(req->wb_this_page != req);
@@ -925,7 +935,6 @@
nfs_pageio_doio(desc);
if (desc->pg_error < 0)
return 0;
- desc->pg_moreio = 0;
if (desc->pg_recoalesce)
return 0;
/* retry add_request for this subreq */
@@ -972,6 +981,7 @@
desc->pg_count = 0;
desc->pg_base = 0;
desc->pg_recoalesce = 0;
+ desc->pg_moreio = 0;
while (!list_empty(&head)) {
struct nfs_page *req;
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 98ff061..5e2f1030 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -46,6 +46,7 @@
static const struct nfs_pgio_completion_ops nfs_async_write_completion_ops;
static const struct nfs_commit_completion_ops nfs_commit_completion_ops;
static const struct nfs_rw_ops nfs_rw_write_ops;
+static void nfs_clear_request_commit(struct nfs_page *req);
static struct kmem_cache *nfs_wdata_cachep;
static mempool_t *nfs_wdata_mempool;
@@ -91,8 +92,15 @@
set_bit(NFS_CONTEXT_ERROR_WRITE, &ctx->flags);
}
+/*
+ * nfs_page_find_head_request_locked - find head request associated with @page
+ *
+ * must be called while holding the inode lock.
+ *
+ * returns matching head request with reference held, or NULL if not found.
+ */
static struct nfs_page *
-nfs_page_find_request_locked(struct nfs_inode *nfsi, struct page *page)
+nfs_page_find_head_request_locked(struct nfs_inode *nfsi, struct page *page)
{
struct nfs_page *req = NULL;
@@ -104,25 +112,33 @@
/* Linearly search the commit list for the correct req */
list_for_each_entry_safe(freq, t, &nfsi->commit_info.list, wb_list) {
if (freq->wb_page == page) {
- req = freq;
+ req = freq->wb_head;
break;
}
}
}
- if (req)
+ if (req) {
+ WARN_ON_ONCE(req->wb_head != req);
+
kref_get(&req->wb_kref);
+ }
return req;
}
-static struct nfs_page *nfs_page_find_request(struct page *page)
+/*
+ * nfs_page_find_head_request - find head request associated with @page
+ *
+ * returns matching head request with reference held, or NULL if not found.
+ */
+static struct nfs_page *nfs_page_find_head_request(struct page *page)
{
struct inode *inode = page_file_mapping(page)->host;
struct nfs_page *req = NULL;
spin_lock(&inode->i_lock);
- req = nfs_page_find_request_locked(NFS_I(inode), page);
+ req = nfs_page_find_head_request_locked(NFS_I(inode), page);
spin_unlock(&inode->i_lock);
return req;
}
@@ -274,36 +290,246 @@
clear_bdi_congested(&nfss->backing_dev_info, BLK_RW_ASYNC);
}
-static struct nfs_page *nfs_find_and_lock_request(struct page *page, bool nonblock)
+
+/* nfs_page_group_clear_bits
+ * @req - an nfs request
+ * clears all page group related bits from @req
+ */
+static void
+nfs_page_group_clear_bits(struct nfs_page *req)
{
- struct inode *inode = page_file_mapping(page)->host;
- struct nfs_page *req;
+ clear_bit(PG_TEARDOWN, &req->wb_flags);
+ clear_bit(PG_UNLOCKPAGE, &req->wb_flags);
+ clear_bit(PG_UPTODATE, &req->wb_flags);
+ clear_bit(PG_WB_END, &req->wb_flags);
+ clear_bit(PG_REMOVE, &req->wb_flags);
+}
+
+
+/*
+ * nfs_unroll_locks_and_wait - unlock all newly locked reqs and wait on @req
+ *
+ * this is a helper function for nfs_lock_and_join_requests
+ *
+ * @inode - inode associated with request page group, must be holding inode lock
+ * @head - head request of page group, must be holding head lock
+ * @req - request that couldn't lock and needs to wait on the req bit lock
+ * @nonblock - if true, don't actually wait
+ *
+ * NOTE: this must be called holding page_group bit lock and inode spin lock
+ * and BOTH will be released before returning.
+ *
+ * returns 0 on success, < 0 on error.
+ */
+static int
+nfs_unroll_locks_and_wait(struct inode *inode, struct nfs_page *head,
+ struct nfs_page *req, bool nonblock)
+ __releases(&inode->i_lock)
+{
+ struct nfs_page *tmp;
int ret;
- spin_lock(&inode->i_lock);
- for (;;) {
- req = nfs_page_find_request_locked(NFS_I(inode), page);
- if (req == NULL)
- break;
- if (nfs_lock_request(req))
- break;
- /* Note: If we hold the page lock, as is the case in nfs_writepage,
- * then the call to nfs_lock_request() will always
- * succeed provided that someone hasn't already marked the
- * request as dirty (in which case we don't care).
- */
- spin_unlock(&inode->i_lock);
- if (!nonblock)
- ret = nfs_wait_on_request(req);
- else
- ret = -EAGAIN;
- nfs_release_request(req);
- if (ret != 0)
- return ERR_PTR(ret);
- spin_lock(&inode->i_lock);
- }
+ /* relinquish all the locks successfully grabbed this run */
+ for (tmp = head ; tmp != req; tmp = tmp->wb_this_page)
+ nfs_unlock_request(tmp);
+
+ WARN_ON_ONCE(test_bit(PG_TEARDOWN, &req->wb_flags));
+
+ /* grab a ref on the request that will be waited on */
+ kref_get(&req->wb_kref);
+
+ nfs_page_group_unlock(head);
spin_unlock(&inode->i_lock);
- return req;
+
+ /* release ref from nfs_page_find_head_request_locked */
+ nfs_release_request(head);
+
+ if (!nonblock)
+ ret = nfs_wait_on_request(req);
+ else
+ ret = -EAGAIN;
+ nfs_release_request(req);
+
+ return ret;
+}
+
+/*
+ * nfs_destroy_unlinked_subrequests - destroy recently unlinked subrequests
+ *
+ * @destroy_list - request list (using wb_this_page) terminated by @old_head
+ * @old_head - the old head of the list
+ *
+ * All subrequests must be locked and removed from all lists, so at this point
+ * they are only "active" in this function, and possibly in nfs_wait_on_request
+ * with a reference held by some other context.
+ */
+static void
+nfs_destroy_unlinked_subrequests(struct nfs_page *destroy_list,
+ struct nfs_page *old_head)
+{
+ while (destroy_list) {
+ struct nfs_page *subreq = destroy_list;
+
+ destroy_list = (subreq->wb_this_page == old_head) ?
+ NULL : subreq->wb_this_page;
+
+ WARN_ON_ONCE(old_head != subreq->wb_head);
+
+ /* make sure old group is not used */
+ subreq->wb_head = subreq;
+ subreq->wb_this_page = subreq;
+
+ nfs_clear_request_commit(subreq);
+
+ /* subreq is now totally disconnected from page group or any
+ * write / commit lists. last chance to wake any waiters */
+ nfs_unlock_request(subreq);
+
+ if (!test_bit(PG_TEARDOWN, &subreq->wb_flags)) {
+ /* release ref on old head request */
+ nfs_release_request(old_head);
+
+ nfs_page_group_clear_bits(subreq);
+
+ /* release the PG_INODE_REF reference */
+ if (test_and_clear_bit(PG_INODE_REF, &subreq->wb_flags))
+ nfs_release_request(subreq);
+ else
+ WARN_ON_ONCE(1);
+ } else {
+ WARN_ON_ONCE(test_bit(PG_CLEAN, &subreq->wb_flags));
+ /* zombie requests have already released the last
+ * reference and were waiting on the rest of the
+ * group to complete. Since it's no longer part of a
+ * group, simply free the request */
+ nfs_page_group_clear_bits(subreq);
+ nfs_free_request(subreq);
+ }
+ }
+}
+
+/*
+ * nfs_lock_and_join_requests - join all subreqs to the head req and return
+ * a locked reference, cancelling any pending
+ * operations for this page.
+ *
+ * @page - the page used to lookup the "page group" of nfs_page structures
+ * @nonblock - if true, don't block waiting for request locks
+ *
+ * This function joins all sub requests to the head request by first
+ * locking all requests in the group, cancelling any pending operations
+ * and finally updating the head request to cover the whole range covered by
+ * the (former) group. All subrequests are removed from any write or commit
+ * lists, unlinked from the group and destroyed.
+ *
+ * Returns a locked, referenced pointer to the head request - which after
+ * this call is guaranteed to be the only request associated with the page.
+ * Returns NULL if no requests are found for @page, or a ERR_PTR if an
+ * error was encountered.
+ */
+static struct nfs_page *
+nfs_lock_and_join_requests(struct page *page, bool nonblock)
+{
+ struct inode *inode = page_file_mapping(page)->host;
+ struct nfs_page *head, *subreq;
+ struct nfs_page *destroy_list = NULL;
+ unsigned int total_bytes;
+ int ret;
+
+try_again:
+ total_bytes = 0;
+
+ WARN_ON_ONCE(destroy_list);
+
+ spin_lock(&inode->i_lock);
+
+ /*
+ * A reference is taken only on the head request which acts as a
+ * reference to the whole page group - the group will not be destroyed
+ * until the head reference is released.
+ */
+ head = nfs_page_find_head_request_locked(NFS_I(inode), page);
+
+ if (!head) {
+ spin_unlock(&inode->i_lock);
+ return NULL;
+ }
+
+ /* lock each request in the page group */
+ nfs_page_group_lock(head);
+ subreq = head;
+ do {
+ /*
+ * Subrequests are always contiguous, non overlapping
+ * and in order. If not, it's a programming error.
+ */
+ WARN_ON_ONCE(subreq->wb_offset !=
+ (head->wb_offset + total_bytes));
+
+ /* keep track of how many bytes this group covers */
+ total_bytes += subreq->wb_bytes;
+
+ if (!nfs_lock_request(subreq)) {
+ /* releases page group bit lock and
+ * inode spin lock and all references */
+ ret = nfs_unroll_locks_and_wait(inode, head,
+ subreq, nonblock);
+
+ if (ret == 0)
+ goto try_again;
+
+ return ERR_PTR(ret);
+ }
+
+ subreq = subreq->wb_this_page;
+ } while (subreq != head);
+
+ /* Now that all requests are locked, make sure they aren't on any list.
+ * Commit list removal accounting is done after locks are dropped */
+ subreq = head;
+ do {
+ nfs_list_remove_request(subreq);
+ subreq = subreq->wb_this_page;
+ } while (subreq != head);
+
+ /* unlink subrequests from head, destroy them later */
+ if (head->wb_this_page != head) {
+ /* destroy list will be terminated by head */
+ destroy_list = head->wb_this_page;
+ head->wb_this_page = head;
+
+ /* change head request to cover whole range that
+ * the former page group covered */
+ head->wb_bytes = total_bytes;
+ }
+
+ /*
+ * prepare head request to be added to new pgio descriptor
+ */
+ nfs_page_group_clear_bits(head);
+
+ /*
+ * some part of the group was still on the inode list - otherwise
+ * the group wouldn't be involved in async write.
+ * grab a reference for the head request, iff it needs one.
+ */
+ if (!test_and_set_bit(PG_INODE_REF, &head->wb_flags))
+ kref_get(&head->wb_kref);
+
+ nfs_page_group_unlock(head);
+
+ /* drop lock to clear_request_commit the head req and clean up
+ * requests on destroy list */
+ spin_unlock(&inode->i_lock);
+
+ nfs_destroy_unlinked_subrequests(destroy_list, head);
+
+ /* clean up commit list state */
+ nfs_clear_request_commit(head);
+
+ /* still holds ref on head from nfs_page_find_head_request_locked
+ * and still has lock on head from lock loop */
+ return head;
}
/*
@@ -316,7 +542,7 @@
struct nfs_page *req;
int ret = 0;
- req = nfs_find_and_lock_request(page, nonblock);
+ req = nfs_lock_and_join_requests(page, nonblock);
if (!req)
goto out;
ret = PTR_ERR(req);
@@ -448,7 +674,9 @@
set_page_private(req->wb_page, (unsigned long)req);
}
nfsi->npages++;
- set_bit(PG_INODE_REF, &req->wb_flags);
+ /* this a head request for a page group - mark it as having an
+ * extra reference so sub groups can follow suit */
+ WARN_ON(test_and_set_bit(PG_INODE_REF, &req->wb_flags));
kref_get(&req->wb_kref);
spin_unlock(&inode->i_lock);
}
@@ -474,7 +702,9 @@
nfsi->npages--;
spin_unlock(&inode->i_lock);
}
- nfs_release_request(req);
+
+ if (test_and_clear_bit(PG_INODE_REF, &req->wb_flags))
+ nfs_release_request(req);
}
static void
@@ -638,7 +868,6 @@
{
struct nfs_commit_info cinfo;
unsigned long bytes = 0;
- bool do_destroy;
if (test_bit(NFS_IOHDR_REDO, &hdr->flags))
goto out;
@@ -668,7 +897,6 @@
next:
nfs_unlock_request(req);
nfs_end_page_writeback(req);
- do_destroy = !test_bit(NFS_IOHDR_NEED_COMMIT, &hdr->flags);
nfs_release_request(req);
}
out:
@@ -769,7 +997,7 @@
spin_lock(&inode->i_lock);
for (;;) {
- req = nfs_page_find_request_locked(NFS_I(inode), page);
+ req = nfs_page_find_head_request_locked(NFS_I(inode), page);
if (req == NULL)
goto out_unlock;
@@ -877,7 +1105,7 @@
* dropped page.
*/
do {
- req = nfs_page_find_request(page);
+ req = nfs_page_find_head_request(page);
if (req == NULL)
return 0;
l_ctx = req->wb_lock_context;
@@ -1569,27 +1797,28 @@
struct nfs_page *req;
int ret = 0;
- for (;;) {
- wait_on_page_writeback(page);
- req = nfs_page_find_request(page);
- if (req == NULL)
- break;
- if (nfs_lock_request(req)) {
- nfs_clear_request_commit(req);
- nfs_inode_remove_request(req);
- /*
- * In case nfs_inode_remove_request has marked the
- * page as being dirty
- */
- cancel_dirty_page(page, PAGE_CACHE_SIZE);
- nfs_unlock_and_release_request(req);
- break;
- }
- ret = nfs_wait_on_request(req);
- nfs_release_request(req);
- if (ret < 0)
- break;
+ wait_on_page_writeback(page);
+
+ /* blocking call to cancel all requests and join to a single (head)
+ * request */
+ req = nfs_lock_and_join_requests(page, false);
+
+ if (IS_ERR(req)) {
+ ret = PTR_ERR(req);
+ } else if (req) {
+ /* all requests from this page have been cancelled by
+ * nfs_lock_and_join_requests, so just remove the head
+ * request from the inode / page_private pointer and
+ * release it */
+ nfs_inode_remove_request(req);
+ /*
+ * In case nfs_inode_remove_request has marked the
+ * page as being dirty
+ */
+ cancel_dirty_page(page, PAGE_CACHE_SIZE);
+ nfs_unlock_and_release_request(req);
}
+
return ret;
}
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 9cd5f63..7f30bdc 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -702,6 +702,7 @@
struct dquot *dquot;
unsigned long freed = 0;
+ spin_lock(&dq_list_lock);
head = free_dquots.prev;
while (head != &free_dquots && sc->nr_to_scan) {
dquot = list_entry(head, struct dquot, dq_free);
@@ -713,6 +714,7 @@
freed++;
head = free_dquots.prev;
}
+ spin_unlock(&dq_list_lock);
return freed;
}
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 96175df..75c3fe5 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -4298,8 +4298,8 @@
}
-int
-__xfs_bmapi_allocate(
+static int
+xfs_bmapi_allocate(
struct xfs_bmalloca *bma)
{
struct xfs_mount *mp = bma->ip->i_mount;
@@ -4578,9 +4578,6 @@
bma.flist = flist;
bma.firstblock = firstblock;
- if (flags & XFS_BMAPI_STACK_SWITCH)
- bma.stack_switch = 1;
-
while (bno < end && n < *nmap) {
inhole = eof || bma.got.br_startoff > bno;
wasdelay = !inhole && isnullstartblock(bma.got.br_startblock);
diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h
index 38ba36e..b879ca5 100644
--- a/fs/xfs/xfs_bmap.h
+++ b/fs/xfs/xfs_bmap.h
@@ -77,7 +77,6 @@
* from written to unwritten, otherwise convert from unwritten to written.
*/
#define XFS_BMAPI_CONVERT 0x040
-#define XFS_BMAPI_STACK_SWITCH 0x080
#define XFS_BMAPI_FLAGS \
{ XFS_BMAPI_ENTIRE, "ENTIRE" }, \
@@ -86,8 +85,7 @@
{ XFS_BMAPI_PREALLOC, "PREALLOC" }, \
{ XFS_BMAPI_IGSTATE, "IGSTATE" }, \
{ XFS_BMAPI_CONTIG, "CONTIG" }, \
- { XFS_BMAPI_CONVERT, "CONVERT" }, \
- { XFS_BMAPI_STACK_SWITCH, "STACK_SWITCH" }
+ { XFS_BMAPI_CONVERT, "CONVERT" }
static inline int xfs_bmapi_aflag(int w)
diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c
index 703b3ec..64731ef 100644
--- a/fs/xfs/xfs_bmap_util.c
+++ b/fs/xfs/xfs_bmap_util.c
@@ -249,59 +249,6 @@
}
/*
- * Stack switching interfaces for allocation
- */
-static void
-xfs_bmapi_allocate_worker(
- struct work_struct *work)
-{
- struct xfs_bmalloca *args = container_of(work,
- struct xfs_bmalloca, work);
- unsigned long pflags;
- unsigned long new_pflags = PF_FSTRANS;
-
- /*
- * we are in a transaction context here, but may also be doing work
- * in kswapd context, and hence we may need to inherit that state
- * temporarily to ensure that we don't block waiting for memory reclaim
- * in any way.
- */
- if (args->kswapd)
- new_pflags |= PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD;
-
- current_set_flags_nested(&pflags, new_pflags);
-
- args->result = __xfs_bmapi_allocate(args);
- complete(args->done);
-
- current_restore_flags_nested(&pflags, new_pflags);
-}
-
-/*
- * Some allocation requests often come in with little stack to work on. Push
- * them off to a worker thread so there is lots of stack to use. Otherwise just
- * call directly to avoid the context switch overhead here.
- */
-int
-xfs_bmapi_allocate(
- struct xfs_bmalloca *args)
-{
- DECLARE_COMPLETION_ONSTACK(done);
-
- if (!args->stack_switch)
- return __xfs_bmapi_allocate(args);
-
-
- args->done = &done;
- args->kswapd = current_is_kswapd();
- INIT_WORK_ONSTACK(&args->work, xfs_bmapi_allocate_worker);
- queue_work(xfs_alloc_wq, &args->work);
- wait_for_completion(&done);
- destroy_work_on_stack(&args->work);
- return args->result;
-}
-
-/*
* Check if the endoff is outside the last extent. If so the caller will grow
* the allocation to a stripe unit boundary. All offsets are considered outside
* the end of file for an empty fork, so 1 is returned in *eof in that case.
diff --git a/fs/xfs/xfs_bmap_util.h b/fs/xfs/xfs_bmap_util.h
index 075f722..2fdb72d 100644
--- a/fs/xfs/xfs_bmap_util.h
+++ b/fs/xfs/xfs_bmap_util.h
@@ -55,8 +55,6 @@
bool userdata;/* set if is user data */
bool aeof; /* allocated space at eof */
bool conv; /* overwriting unwritten extents */
- bool stack_switch;
- bool kswapd; /* allocation in kswapd context */
int flags;
struct completion *done;
struct work_struct work;
@@ -66,8 +64,6 @@
int xfs_bmap_finish(struct xfs_trans **tp, struct xfs_bmap_free *flist,
int *committed);
int xfs_bmap_rtalloc(struct xfs_bmalloca *ap);
-int xfs_bmapi_allocate(struct xfs_bmalloca *args);
-int __xfs_bmapi_allocate(struct xfs_bmalloca *args);
int xfs_bmap_eof(struct xfs_inode *ip, xfs_fileoff_t endoff,
int whichfork, int *eof);
int xfs_bmap_count_blocks(struct xfs_trans *tp, struct xfs_inode *ip,
diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c
index bf810c6..cf893bc 100644
--- a/fs/xfs/xfs_btree.c
+++ b/fs/xfs/xfs_btree.c
@@ -33,6 +33,7 @@
#include "xfs_error.h"
#include "xfs_trace.h"
#include "xfs_cksum.h"
+#include "xfs_alloc.h"
/*
* Cursor allocation zone.
@@ -2323,7 +2324,7 @@
* record (to be inserted into parent).
*/
STATIC int /* error */
-xfs_btree_split(
+__xfs_btree_split(
struct xfs_btree_cur *cur,
int level,
union xfs_btree_ptr *ptrp,
@@ -2503,6 +2504,85 @@
return error;
}
+struct xfs_btree_split_args {
+ struct xfs_btree_cur *cur;
+ int level;
+ union xfs_btree_ptr *ptrp;
+ union xfs_btree_key *key;
+ struct xfs_btree_cur **curp;
+ int *stat; /* success/failure */
+ int result;
+ bool kswapd; /* allocation in kswapd context */
+ struct completion *done;
+ struct work_struct work;
+};
+
+/*
+ * Stack switching interfaces for allocation
+ */
+static void
+xfs_btree_split_worker(
+ struct work_struct *work)
+{
+ struct xfs_btree_split_args *args = container_of(work,
+ struct xfs_btree_split_args, work);
+ unsigned long pflags;
+ unsigned long new_pflags = PF_FSTRANS;
+
+ /*
+ * we are in a transaction context here, but may also be doing work
+ * in kswapd context, and hence we may need to inherit that state
+ * temporarily to ensure that we don't block waiting for memory reclaim
+ * in any way.
+ */
+ if (args->kswapd)
+ new_pflags |= PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD;
+
+ current_set_flags_nested(&pflags, new_pflags);
+
+ args->result = __xfs_btree_split(args->cur, args->level, args->ptrp,
+ args->key, args->curp, args->stat);
+ complete(args->done);
+
+ current_restore_flags_nested(&pflags, new_pflags);
+}
+
+/*
+ * BMBT split requests often come in with little stack to work on. Push
+ * them off to a worker thread so there is lots of stack to use. For the other
+ * btree types, just call directly to avoid the context switch overhead here.
+ */
+STATIC int /* error */
+xfs_btree_split(
+ struct xfs_btree_cur *cur,
+ int level,
+ union xfs_btree_ptr *ptrp,
+ union xfs_btree_key *key,
+ struct xfs_btree_cur **curp,
+ int *stat) /* success/failure */
+{
+ struct xfs_btree_split_args args;
+ DECLARE_COMPLETION_ONSTACK(done);
+
+ if (cur->bc_btnum != XFS_BTNUM_BMAP)
+ return __xfs_btree_split(cur, level, ptrp, key, curp, stat);
+
+ args.cur = cur;
+ args.level = level;
+ args.ptrp = ptrp;
+ args.key = key;
+ args.curp = curp;
+ args.stat = stat;
+ args.done = &done;
+ args.kswapd = current_is_kswapd();
+ INIT_WORK_ONSTACK(&args.work, xfs_btree_split_worker);
+ queue_work(xfs_alloc_wq, &args.work);
+ wait_for_completion(&done);
+ destroy_work_on_stack(&args.work);
+ return args.result;
+}
+
+
/*
* Copy the old inode root contents into a real block and make the
* broot point to it.
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 6c5eb4c..6d3ec2b 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -749,8 +749,7 @@
* pointer that the caller gave to us.
*/
error = xfs_bmapi_write(tp, ip, map_start_fsb,
- count_fsb,
- XFS_BMAPI_STACK_SWITCH,
+ count_fsb, 0,
&first_block, 1,
imap, &nimaps, &free_list);
if (error)
diff --git a/fs/xfs/xfs_sb.c b/fs/xfs/xfs_sb.c
index c3453b1..7703fa6 100644
--- a/fs/xfs/xfs_sb.c
+++ b/fs/xfs/xfs_sb.c
@@ -483,10 +483,16 @@
}
/*
- * GQUOTINO and PQUOTINO cannot be used together in versions
- * of superblock that do not have pquotino. from->sb_flags
- * tells us which quota is active and should be copied to
- * disk.
+ * GQUOTINO and PQUOTINO cannot be used together in versions of
+ * superblock that do not have pquotino. from->sb_flags tells us which
+ * quota is active and should be copied to disk. If neither are active,
+ * make sure we write NULLFSINO to the sb_gquotino field as a quota
+ * inode value of "0" is invalid when the XFS_SB_VERSION_QUOTA feature
+ * bit is set.
+ *
+ * Note that we don't need to handle the sb_uquotino or sb_pquotino here
+ * as they do not require any translation. Hence the main sb field loop
+ * will write them appropriately from the in-core superblock.
*/
if ((*fields & XFS_SB_GQUOTINO) &&
(from->sb_qflags & XFS_GQUOTA_ACCT))
@@ -494,6 +500,17 @@
else if ((*fields & XFS_SB_PQUOTINO) &&
(from->sb_qflags & XFS_PQUOTA_ACCT))
to->sb_gquotino = cpu_to_be64(from->sb_pquotino);
+ else {
+ /*
+ * We can't rely on just the fields being logged to tell us
+ * that it is safe to write NULLFSINO - we should only do that
+ * if quotas are not actually enabled. Hence only write
+ * NULLFSINO if both in-core quota inodes are NULL.
+ */
+ if (from->sb_gquotino == NULLFSINO &&
+ from->sb_pquotino == NULLFSINO)
+ to->sb_gquotino = cpu_to_be64(NULLFSINO);
+ }
*fields &= ~(XFS_SB_PQUOTINO | XFS_SB_GQUOTINO);
}
diff --git a/include/dt-bindings/clock/imx1-clock.h b/include/dt-bindings/clock/imx1-clock.h
new file mode 100644
index 0000000..607bf01
--- /dev/null
+++ b/include/dt-bindings/clock/imx1-clock.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX1_H
+#define __DT_BINDINGS_CLOCK_IMX1_H
+
+#define IMX1_CLK_DUMMY 0
+#define IMX1_CLK_CLK32 1
+#define IMX1_CLK_CLK16M_EXT 2
+#define IMX1_CLK_CLK16M 3
+#define IMX1_CLK_CLK32_PREMULT 4
+#define IMX1_CLK_PREM 5
+#define IMX1_CLK_MPLL 6
+#define IMX1_CLK_MPLL_GATE 7
+#define IMX1_CLK_SPLL 8
+#define IMX1_CLK_SPLL_GATE 9
+#define IMX1_CLK_MCU 10
+#define IMX1_CLK_FCLK 11
+#define IMX1_CLK_HCLK 12
+#define IMX1_CLK_CLK48M 13
+#define IMX1_CLK_PER1 14
+#define IMX1_CLK_PER2 15
+#define IMX1_CLK_PER3 16
+#define IMX1_CLK_CLKO 17
+#define IMX1_CLK_UART3_GATE 18
+#define IMX1_CLK_SSI2_GATE 19
+#define IMX1_CLK_BROM_GATE 20
+#define IMX1_CLK_DMA_GATE 21
+#define IMX1_CLK_CSI_GATE 22
+#define IMX1_CLK_MMA_GATE 23
+#define IMX1_CLK_USBD_GATE 24
+#define IMX1_CLK_MAX 25
+
+#endif
diff --git a/include/dt-bindings/clock/imx21-clock.h b/include/dt-bindings/clock/imx21-clock.h
new file mode 100644
index 0000000..b13596c
--- /dev/null
+++ b/include/dt-bindings/clock/imx21-clock.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX21_H
+#define __DT_BINDINGS_CLOCK_IMX21_H
+
+#define IMX21_CLK_DUMMY 0
+#define IMX21_CLK_CKIL 1
+#define IMX21_CLK_CKIH 2
+#define IMX21_CLK_FPM 3
+#define IMX21_CLK_CKIH_DIV1P5 4
+#define IMX21_CLK_MPLL_GATE 5
+#define IMX21_CLK_SPLL_GATE 6
+#define IMX21_CLK_FPM_GATE 7
+#define IMX21_CLK_CKIH_GATE 8
+#define IMX21_CLK_MPLL_OSC_SEL 9
+#define IMX21_CLK_IPG 10
+#define IMX21_CLK_HCLK 11
+#define IMX21_CLK_MPLL_SEL 12
+#define IMX21_CLK_SPLL_SEL 13
+#define IMX21_CLK_SSI1_SEL 14
+#define IMX21_CLK_SSI2_SEL 15
+#define IMX21_CLK_USB_DIV 16
+#define IMX21_CLK_FCLK 17
+#define IMX21_CLK_MPLL 18
+#define IMX21_CLK_SPLL 19
+#define IMX21_CLK_NFC_DIV 20
+#define IMX21_CLK_SSI1_DIV 21
+#define IMX21_CLK_SSI2_DIV 22
+#define IMX21_CLK_PER1 23
+#define IMX21_CLK_PER2 24
+#define IMX21_CLK_PER3 25
+#define IMX21_CLK_PER4 26
+#define IMX21_CLK_UART1_IPG_GATE 27
+#define IMX21_CLK_UART2_IPG_GATE 28
+#define IMX21_CLK_UART3_IPG_GATE 29
+#define IMX21_CLK_UART4_IPG_GATE 30
+#define IMX21_CLK_CSPI1_IPG_GATE 31
+#define IMX21_CLK_CSPI2_IPG_GATE 32
+#define IMX21_CLK_SSI1_GATE 33
+#define IMX21_CLK_SSI2_GATE 34
+#define IMX21_CLK_SDHC1_IPG_GATE 35
+#define IMX21_CLK_SDHC2_IPG_GATE 36
+#define IMX21_CLK_GPIO_GATE 37
+#define IMX21_CLK_I2C_GATE 38
+#define IMX21_CLK_DMA_GATE 39
+#define IMX21_CLK_USB_GATE 40
+#define IMX21_CLK_EMMA_GATE 41
+#define IMX21_CLK_SSI2_BAUD_GATE 42
+#define IMX21_CLK_SSI1_BAUD_GATE 43
+#define IMX21_CLK_LCDC_IPG_GATE 44
+#define IMX21_CLK_NFC_GATE 45
+#define IMX21_CLK_LCDC_HCLK_GATE 46
+#define IMX21_CLK_PER4_GATE 47
+#define IMX21_CLK_BMI_GATE 48
+#define IMX21_CLK_USB_HCLK_GATE 49
+#define IMX21_CLK_SLCDC_GATE 50
+#define IMX21_CLK_SLCDC_HCLK_GATE 51
+#define IMX21_CLK_EMMA_HCLK_GATE 52
+#define IMX21_CLK_BROM_GATE 53
+#define IMX21_CLK_DMA_HCLK_GATE 54
+#define IMX21_CLK_CSI_HCLK_GATE 55
+#define IMX21_CLK_CSPI3_IPG_GATE 56
+#define IMX21_CLK_WDOG_GATE 57
+#define IMX21_CLK_GPT1_IPG_GATE 58
+#define IMX21_CLK_GPT2_IPG_GATE 59
+#define IMX21_CLK_GPT3_IPG_GATE 60
+#define IMX21_CLK_PWM_IPG_GATE 61
+#define IMX21_CLK_RTC_GATE 62
+#define IMX21_CLK_KPP_GATE 63
+#define IMX21_CLK_OWIRE_GATE 64
+#define IMX21_CLK_MAX 65
+
+#endif
diff --git a/include/dt-bindings/clock/imx27-clock.h b/include/dt-bindings/clock/imx27-clock.h
new file mode 100644
index 0000000..148b053
--- /dev/null
+++ b/include/dt-bindings/clock/imx27-clock.h
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX27_H
+#define __DT_BINDINGS_CLOCK_IMX27_H
+
+#define IMX27_CLK_DUMMY 0
+#define IMX27_CLK_CKIH 1
+#define IMX27_CLK_CKIL 2
+#define IMX27_CLK_MPLL 3
+#define IMX27_CLK_SPLL 4
+#define IMX27_CLK_MPLL_MAIN2 5
+#define IMX27_CLK_AHB 6
+#define IMX27_CLK_IPG 7
+#define IMX27_CLK_NFC_DIV 8
+#define IMX27_CLK_PER1_DIV 9
+#define IMX27_CLK_PER2_DIV 10
+#define IMX27_CLK_PER3_DIV 11
+#define IMX27_CLK_PER4_DIV 12
+#define IMX27_CLK_VPU_SEL 13
+#define IMX27_CLK_VPU_DIV 14
+#define IMX27_CLK_USB_DIV 15
+#define IMX27_CLK_CPU_SEL 16
+#define IMX27_CLK_CLKO_SEL 17
+#define IMX27_CLK_CPU_DIV 18
+#define IMX27_CLK_CLKO_DIV 19
+#define IMX27_CLK_SSI1_SEL 20
+#define IMX27_CLK_SSI2_SEL 21
+#define IMX27_CLK_SSI1_DIV 22
+#define IMX27_CLK_SSI2_DIV 23
+#define IMX27_CLK_CLKO_EN 24
+#define IMX27_CLK_SSI2_IPG_GATE 25
+#define IMX27_CLK_SSI1_IPG_GATE 26
+#define IMX27_CLK_SLCDC_IPG_GATE 27
+#define IMX27_CLK_SDHC3_IPG_GATE 28
+#define IMX27_CLK_SDHC2_IPG_GATE 29
+#define IMX27_CLK_SDHC1_IPG_GATE 30
+#define IMX27_CLK_SCC_IPG_GATE 31
+#define IMX27_CLK_SAHARA_IPG_GATE 32
+#define IMX27_CLK_RTC_IPG_GATE 33
+#define IMX27_CLK_PWM_IPG_GATE 34
+#define IMX27_CLK_OWIRE_IPG_GATE 35
+#define IMX27_CLK_LCDC_IPG_GATE 36
+#define IMX27_CLK_KPP_IPG_GATE 37
+#define IMX27_CLK_IIM_IPG_GATE 38
+#define IMX27_CLK_I2C2_IPG_GATE 39
+#define IMX27_CLK_I2C1_IPG_GATE 40
+#define IMX27_CLK_GPT6_IPG_GATE 41
+#define IMX27_CLK_GPT5_IPG_GATE 42
+#define IMX27_CLK_GPT4_IPG_GATE 43
+#define IMX27_CLK_GPT3_IPG_GATE 44
+#define IMX27_CLK_GPT2_IPG_GATE 45
+#define IMX27_CLK_GPT1_IPG_GATE 46
+#define IMX27_CLK_GPIO_IPG_GATE 47
+#define IMX27_CLK_FEC_IPG_GATE 48
+#define IMX27_CLK_EMMA_IPG_GATE 49
+#define IMX27_CLK_DMA_IPG_GATE 50
+#define IMX27_CLK_CSPI3_IPG_GATE 51
+#define IMX27_CLK_CSPI2_IPG_GATE 52
+#define IMX27_CLK_CSPI1_IPG_GATE 53
+#define IMX27_CLK_NFC_BAUD_GATE 54
+#define IMX27_CLK_SSI2_BAUD_GATE 55
+#define IMX27_CLK_SSI1_BAUD_GATE 56
+#define IMX27_CLK_VPU_BAUD_GATE 57
+#define IMX27_CLK_PER4_GATE 58
+#define IMX27_CLK_PER3_GATE 59
+#define IMX27_CLK_PER2_GATE 60
+#define IMX27_CLK_PER1_GATE 61
+#define IMX27_CLK_USB_AHB_GATE 62
+#define IMX27_CLK_SLCDC_AHB_GATE 63
+#define IMX27_CLK_SAHARA_AHB_GATE 64
+#define IMX27_CLK_LCDC_AHB_GATE 65
+#define IMX27_CLK_VPU_AHB_GATE 66
+#define IMX27_CLK_FEC_AHB_GATE 67
+#define IMX27_CLK_EMMA_AHB_GATE 68
+#define IMX27_CLK_EMI_AHB_GATE 69
+#define IMX27_CLK_DMA_AHB_GATE 70
+#define IMX27_CLK_CSI_AHB_GATE 71
+#define IMX27_CLK_BROM_AHB_GATE 72
+#define IMX27_CLK_ATA_AHB_GATE 73
+#define IMX27_CLK_WDOG_IPG_GATE 74
+#define IMX27_CLK_USB_IPG_GATE 75
+#define IMX27_CLK_UART6_IPG_GATE 76
+#define IMX27_CLK_UART5_IPG_GATE 77
+#define IMX27_CLK_UART4_IPG_GATE 78
+#define IMX27_CLK_UART3_IPG_GATE 79
+#define IMX27_CLK_UART2_IPG_GATE 80
+#define IMX27_CLK_UART1_IPG_GATE 81
+#define IMX27_CLK_CKIH_DIV1P5 82
+#define IMX27_CLK_FPM 83
+#define IMX27_CLK_MPLL_OSC_SEL 84
+#define IMX27_CLK_MPLL_SEL 85
+#define IMX27_CLK_SPLL_GATE 86
+#define IMX27_CLK_MSHC_DIV 87
+#define IMX27_CLK_RTIC_IPG_GATE 88
+#define IMX27_CLK_MSHC_IPG_GATE 89
+#define IMX27_CLK_RTIC_AHB_GATE 90
+#define IMX27_CLK_MSHC_BAUD_GATE 91
+#define IMX27_CLK_CKIH_GATE 92
+#define IMX27_CLK_MAX 93
+
+#endif
diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
new file mode 100644
index 0000000..654151e
--- /dev/null
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
@@ -0,0 +1,224 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX6QDL_H
+#define __DT_BINDINGS_CLOCK_IMX6QDL_H
+
+#define IMX6QDL_CLK_DUMMY 0
+#define IMX6QDL_CLK_CKIL 1
+#define IMX6QDL_CLK_CKIH 2
+#define IMX6QDL_CLK_OSC 3
+#define IMX6QDL_CLK_PLL2_PFD0_352M 4
+#define IMX6QDL_CLK_PLL2_PFD1_594M 5
+#define IMX6QDL_CLK_PLL2_PFD2_396M 6
+#define IMX6QDL_CLK_PLL3_PFD0_720M 7
+#define IMX6QDL_CLK_PLL3_PFD1_540M 8
+#define IMX6QDL_CLK_PLL3_PFD2_508M 9
+#define IMX6QDL_CLK_PLL3_PFD3_454M 10
+#define IMX6QDL_CLK_PLL2_198M 11
+#define IMX6QDL_CLK_PLL3_120M 12
+#define IMX6QDL_CLK_PLL3_80M 13
+#define IMX6QDL_CLK_PLL3_60M 14
+#define IMX6QDL_CLK_TWD 15
+#define IMX6QDL_CLK_STEP 16
+#define IMX6QDL_CLK_PLL1_SW 17
+#define IMX6QDL_CLK_PERIPH_PRE 18
+#define IMX6QDL_CLK_PERIPH2_PRE 19
+#define IMX6QDL_CLK_PERIPH_CLK2_SEL 20
+#define IMX6QDL_CLK_PERIPH2_CLK2_SEL 21
+#define IMX6QDL_CLK_AXI_SEL 22
+#define IMX6QDL_CLK_ESAI_SEL 23
+#define IMX6QDL_CLK_ASRC_SEL 24
+#define IMX6QDL_CLK_SPDIF_SEL 25
+#define IMX6QDL_CLK_GPU2D_AXI 26
+#define IMX6QDL_CLK_GPU3D_AXI 27
+#define IMX6QDL_CLK_GPU2D_CORE_SEL 28
+#define IMX6QDL_CLK_GPU3D_CORE_SEL 29
+#define IMX6QDL_CLK_GPU3D_SHADER_SEL 30
+#define IMX6QDL_CLK_IPU1_SEL 31
+#define IMX6QDL_CLK_IPU2_SEL 32
+#define IMX6QDL_CLK_LDB_DI0_SEL 33
+#define IMX6QDL_CLK_LDB_DI1_SEL 34
+#define IMX6QDL_CLK_IPU1_DI0_PRE_SEL 35
+#define IMX6QDL_CLK_IPU1_DI1_PRE_SEL 36
+#define IMX6QDL_CLK_IPU2_DI0_PRE_SEL 37
+#define IMX6QDL_CLK_IPU2_DI1_PRE_SEL 38
+#define IMX6QDL_CLK_IPU1_DI0_SEL 39
+#define IMX6QDL_CLK_IPU1_DI1_SEL 40
+#define IMX6QDL_CLK_IPU2_DI0_SEL 41
+#define IMX6QDL_CLK_IPU2_DI1_SEL 42
+#define IMX6QDL_CLK_HSI_TX_SEL 43
+#define IMX6QDL_CLK_PCIE_AXI_SEL 44
+#define IMX6QDL_CLK_SSI1_SEL 45
+#define IMX6QDL_CLK_SSI2_SEL 46
+#define IMX6QDL_CLK_SSI3_SEL 47
+#define IMX6QDL_CLK_USDHC1_SEL 48
+#define IMX6QDL_CLK_USDHC2_SEL 49
+#define IMX6QDL_CLK_USDHC3_SEL 50
+#define IMX6QDL_CLK_USDHC4_SEL 51
+#define IMX6QDL_CLK_ENFC_SEL 52
+#define IMX6QDL_CLK_EMI_SEL 53
+#define IMX6QDL_CLK_EMI_SLOW_SEL 54
+#define IMX6QDL_CLK_VDO_AXI_SEL 55
+#define IMX6QDL_CLK_VPU_AXI_SEL 56
+#define IMX6QDL_CLK_CKO1_SEL 57
+#define IMX6QDL_CLK_PERIPH 58
+#define IMX6QDL_CLK_PERIPH2 59
+#define IMX6QDL_CLK_PERIPH_CLK2 60
+#define IMX6QDL_CLK_PERIPH2_CLK2 61
+#define IMX6QDL_CLK_IPG 62
+#define IMX6QDL_CLK_IPG_PER 63
+#define IMX6QDL_CLK_ESAI_PRED 64
+#define IMX6QDL_CLK_ESAI_PODF 65
+#define IMX6QDL_CLK_ASRC_PRED 66
+#define IMX6QDL_CLK_ASRC_PODF 67
+#define IMX6QDL_CLK_SPDIF_PRED 68
+#define IMX6QDL_CLK_SPDIF_PODF 69
+#define IMX6QDL_CLK_CAN_ROOT 70
+#define IMX6QDL_CLK_ECSPI_ROOT 71
+#define IMX6QDL_CLK_GPU2D_CORE_PODF 72
+#define IMX6QDL_CLK_GPU3D_CORE_PODF 73
+#define IMX6QDL_CLK_GPU3D_SHADER 74
+#define IMX6QDL_CLK_IPU1_PODF 75
+#define IMX6QDL_CLK_IPU2_PODF 76
+#define IMX6QDL_CLK_LDB_DI0_PODF 77
+#define IMX6QDL_CLK_LDB_DI1_PODF 78
+#define IMX6QDL_CLK_IPU1_DI0_PRE 79
+#define IMX6QDL_CLK_IPU1_DI1_PRE 80
+#define IMX6QDL_CLK_IPU2_DI0_PRE 81
+#define IMX6QDL_CLK_IPU2_DI1_PRE 82
+#define IMX6QDL_CLK_HSI_TX_PODF 83
+#define IMX6QDL_CLK_SSI1_PRED 84
+#define IMX6QDL_CLK_SSI1_PODF 85
+#define IMX6QDL_CLK_SSI2_PRED 86
+#define IMX6QDL_CLK_SSI2_PODF 87
+#define IMX6QDL_CLK_SSI3_PRED 88
+#define IMX6QDL_CLK_SSI3_PODF 89
+#define IMX6QDL_CLK_UART_SERIAL_PODF 90
+#define IMX6QDL_CLK_USDHC1_PODF 91
+#define IMX6QDL_CLK_USDHC2_PODF 92
+#define IMX6QDL_CLK_USDHC3_PODF 93
+#define IMX6QDL_CLK_USDHC4_PODF 94
+#define IMX6QDL_CLK_ENFC_PRED 95
+#define IMX6QDL_CLK_ENFC_PODF 96
+#define IMX6QDL_CLK_EMI_PODF 97
+#define IMX6QDL_CLK_EMI_SLOW_PODF 98
+#define IMX6QDL_CLK_VPU_AXI_PODF 99
+#define IMX6QDL_CLK_CKO1_PODF 100
+#define IMX6QDL_CLK_AXI 101
+#define IMX6QDL_CLK_MMDC_CH0_AXI_PODF 102
+#define IMX6QDL_CLK_MMDC_CH1_AXI_PODF 103
+#define IMX6QDL_CLK_ARM 104
+#define IMX6QDL_CLK_AHB 105
+#define IMX6QDL_CLK_APBH_DMA 106
+#define IMX6QDL_CLK_ASRC 107
+#define IMX6QDL_CLK_CAN1_IPG 108
+#define IMX6QDL_CLK_CAN1_SERIAL 109
+#define IMX6QDL_CLK_CAN2_IPG 110
+#define IMX6QDL_CLK_CAN2_SERIAL 111
+#define IMX6QDL_CLK_ECSPI1 112
+#define IMX6QDL_CLK_ECSPI2 113
+#define IMX6QDL_CLK_ECSPI3 114
+#define IMX6QDL_CLK_ECSPI4 115
+#define IMX6Q_CLK_ECSPI5 116
+#define IMX6DL_CLK_I2C4 116
+#define IMX6QDL_CLK_ENET 117
+#define IMX6QDL_CLK_ESAI 118
+#define IMX6QDL_CLK_GPT_IPG 119
+#define IMX6QDL_CLK_GPT_IPG_PER 120
+#define IMX6QDL_CLK_GPU2D_CORE 121
+#define IMX6QDL_CLK_GPU3D_CORE 122
+#define IMX6QDL_CLK_HDMI_IAHB 123
+#define IMX6QDL_CLK_HDMI_ISFR 124
+#define IMX6QDL_CLK_I2C1 125
+#define IMX6QDL_CLK_I2C2 126
+#define IMX6QDL_CLK_I2C3 127
+#define IMX6QDL_CLK_IIM 128
+#define IMX6QDL_CLK_ENFC 129
+#define IMX6QDL_CLK_IPU1 130
+#define IMX6QDL_CLK_IPU1_DI0 131
+#define IMX6QDL_CLK_IPU1_DI1 132
+#define IMX6QDL_CLK_IPU2 133
+#define IMX6QDL_CLK_IPU2_DI0 134
+#define IMX6QDL_CLK_LDB_DI0 135
+#define IMX6QDL_CLK_LDB_DI1 136
+#define IMX6QDL_CLK_IPU2_DI1 137
+#define IMX6QDL_CLK_HSI_TX 138
+#define IMX6QDL_CLK_MLB 139
+#define IMX6QDL_CLK_MMDC_CH0_AXI 140
+#define IMX6QDL_CLK_MMDC_CH1_AXI 141
+#define IMX6QDL_CLK_OCRAM 142
+#define IMX6QDL_CLK_OPENVG_AXI 143
+#define IMX6QDL_CLK_PCIE_AXI 144
+#define IMX6QDL_CLK_PWM1 145
+#define IMX6QDL_CLK_PWM2 146
+#define IMX6QDL_CLK_PWM3 147
+#define IMX6QDL_CLK_PWM4 148
+#define IMX6QDL_CLK_PER1_BCH 149
+#define IMX6QDL_CLK_GPMI_BCH_APB 150
+#define IMX6QDL_CLK_GPMI_BCH 151
+#define IMX6QDL_CLK_GPMI_IO 152
+#define IMX6QDL_CLK_GPMI_APB 153
+#define IMX6QDL_CLK_SATA 154
+#define IMX6QDL_CLK_SDMA 155
+#define IMX6QDL_CLK_SPBA 156
+#define IMX6QDL_CLK_SSI1 157
+#define IMX6QDL_CLK_SSI2 158
+#define IMX6QDL_CLK_SSI3 159
+#define IMX6QDL_CLK_UART_IPG 160
+#define IMX6QDL_CLK_UART_SERIAL 161
+#define IMX6QDL_CLK_USBOH3 162
+#define IMX6QDL_CLK_USDHC1 163
+#define IMX6QDL_CLK_USDHC2 164
+#define IMX6QDL_CLK_USDHC3 165
+#define IMX6QDL_CLK_USDHC4 166
+#define IMX6QDL_CLK_VDO_AXI 167
+#define IMX6QDL_CLK_VPU_AXI 168
+#define IMX6QDL_CLK_CKO1 169
+#define IMX6QDL_CLK_PLL1_SYS 170
+#define IMX6QDL_CLK_PLL2_BUS 171
+#define IMX6QDL_CLK_PLL3_USB_OTG 172
+#define IMX6QDL_CLK_PLL4_AUDIO 173
+#define IMX6QDL_CLK_PLL5_VIDEO 174
+#define IMX6QDL_CLK_PLL8_MLB 175
+#define IMX6QDL_CLK_PLL7_USB_HOST 176
+#define IMX6QDL_CLK_PLL6_ENET 177
+#define IMX6QDL_CLK_SSI1_IPG 178
+#define IMX6QDL_CLK_SSI2_IPG 179
+#define IMX6QDL_CLK_SSI3_IPG 180
+#define IMX6QDL_CLK_ROM 181
+#define IMX6QDL_CLK_USBPHY1 182
+#define IMX6QDL_CLK_USBPHY2 183
+#define IMX6QDL_CLK_LDB_DI0_DIV_3_5 184
+#define IMX6QDL_CLK_LDB_DI1_DIV_3_5 185
+#define IMX6QDL_CLK_SATA_REF 186
+#define IMX6QDL_CLK_SATA_REF_100M 187
+#define IMX6QDL_CLK_PCIE_REF 188
+#define IMX6QDL_CLK_PCIE_REF_125M 189
+#define IMX6QDL_CLK_ENET_REF 190
+#define IMX6QDL_CLK_USBPHY1_GATE 191
+#define IMX6QDL_CLK_USBPHY2_GATE 192
+#define IMX6QDL_CLK_PLL4_POST_DIV 193
+#define IMX6QDL_CLK_PLL5_POST_DIV 194
+#define IMX6QDL_CLK_PLL5_VIDEO_DIV 195
+#define IMX6QDL_CLK_EIM_SLOW 196
+#define IMX6QDL_CLK_SPDIF 197
+#define IMX6QDL_CLK_CKO2_SEL 198
+#define IMX6QDL_CLK_CKO2_PODF 199
+#define IMX6QDL_CLK_CKO2 200
+#define IMX6QDL_CLK_CKO 201
+#define IMX6QDL_CLK_VDOA 202
+#define IMX6QDL_CLK_PLL4_AUDIO_DIV 203
+#define IMX6QDL_CLK_LVDS1_SEL 204
+#define IMX6QDL_CLK_LVDS2_SEL 205
+#define IMX6QDL_CLK_LVDS1_GATE 206
+#define IMX6QDL_CLK_LVDS2_GATE 207
+#define IMX6QDL_CLK_ESAI_AHB 208
+#define IMX6QDL_CLK_END 209
+
+#endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h
index a916029..00953d9 100644
--- a/include/dt-bindings/clock/vf610-clock.h
+++ b/include/dt-bindings/clock/vf610-clock.h
@@ -164,6 +164,8 @@
#define VF610_CLK_DMAMUX1 151
#define VF610_CLK_DMAMUX2 152
#define VF610_CLK_DMAMUX3 153
-#define VF610_CLK_END 154
+#define VF610_CLK_FLEXCAN0_EN 154
+#define VF610_CLK_FLEXCAN1_EN 155
+#define VF610_CLK_END 156
#endif /* __DT_BINDINGS_CLOCK_VF610_H */
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index ec4112d..8f8ae95 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -482,8 +482,8 @@
*********************************************************************/
/* Special Values of .frequency field */
-#define CPUFREQ_ENTRY_INVALID ~0
-#define CPUFREQ_TABLE_END ~1
+#define CPUFREQ_ENTRY_INVALID ~0u
+#define CPUFREQ_TABLE_END ~1u
/* Special Values of .flags field */
#define CPUFREQ_BOOST_FREQ (1 << 0)
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index b12f4bb..35b51e7 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -578,8 +578,6 @@
u32 cons_index;
u16 irq;
- bool irq_affinity_change;
-
__be32 *set_ci_db;
__be32 *arm_db;
int arm_sn;
@@ -1167,6 +1165,8 @@
int *vector);
void mlx4_release_eq(struct mlx4_dev *dev, int vec);
+int mlx4_eq_get_irq(struct mlx4_dev *dev, int vec);
+
int mlx4_get_phys_port_id(struct mlx4_dev *dev);
int mlx4_wol_read(struct mlx4_dev *dev, u64 *config, int port);
int mlx4_wol_write(struct mlx4_dev *dev, u64 config, int port);
diff --git a/include/linux/mutex.h b/include/linux/mutex.h
index 11692de..42aa9b9 100644
--- a/include/linux/mutex.h
+++ b/include/linux/mutex.h
@@ -17,6 +17,7 @@
#include <linux/lockdep.h>
#include <linux/atomic.h>
#include <asm/processor.h>
+#include <linux/osq_lock.h>
/*
* Simple, straightforward mutexes with strict semantics:
@@ -46,7 +47,6 @@
* - detects multi-task circular deadlocks and prints out all affected
* locks and tasks (and only those tasks)
*/
-struct optimistic_spin_queue;
struct mutex {
/* 1: unlocked, 0: locked, negative: locked, possible waiters */
atomic_t count;
@@ -56,7 +56,7 @@
struct task_struct *owner;
#endif
#ifdef CONFIG_MUTEX_SPIN_ON_OWNER
- struct optimistic_spin_queue *osq; /* Spinner MCS lock */
+ struct optimistic_spin_queue osq; /* Spinner MCS lock */
#endif
#ifdef CONFIG_DEBUG_MUTEXES
const char *name;
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
index a70c949..d449018 100644
--- a/include/linux/of_mdio.h
+++ b/include/linux/of_mdio.h
@@ -25,9 +25,6 @@
extern struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np);
-extern void of_mdiobus_link_phydev(struct mii_bus *mdio,
- struct phy_device *phydev);
-
#else /* CONFIG_OF */
static inline int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
{
@@ -63,11 +60,6 @@
{
return NULL;
}
-
-static inline void of_mdiobus_link_phydev(struct mii_bus *mdio,
- struct phy_device *phydev)
-{
-}
#endif /* CONFIG_OF */
#if defined(CONFIG_OF) && defined(CONFIG_FIXED_PHY)
diff --git a/include/linux/omap-dma.h b/include/linux/omap-dma.h
index 88e6ea4..6f06f8b 100644
--- a/include/linux/omap-dma.h
+++ b/include/linux/omap-dma.h
@@ -130,6 +130,7 @@
#define IS_WORD_16 BIT(0xd)
#define ENABLE_16XX_MODE BIT(0xe)
#define HS_CHANNELS_RESERVED BIT(0xf)
+#define DMA_ENGINE_HANDLE_IRQ BIT(0x10)
/* Defines for DMA Capabilities */
#define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18)
diff --git a/include/linux/osq_lock.h b/include/linux/osq_lock.h
new file mode 100644
index 0000000..90230d5
--- /dev/null
+++ b/include/linux/osq_lock.h
@@ -0,0 +1,27 @@
+#ifndef __LINUX_OSQ_LOCK_H
+#define __LINUX_OSQ_LOCK_H
+
+/*
+ * An MCS like lock especially tailored for optimistic spinning for sleeping
+ * lock implementations (mutex, rwsem, etc).
+ */
+
+#define OSQ_UNLOCKED_VAL (0)
+
+struct optimistic_spin_queue {
+ /*
+ * Stores an encoded value of the CPU # of the tail node in the queue.
+ * If the queue is empty, then it's set to OSQ_UNLOCKED_VAL.
+ */
+ atomic_t tail;
+};
+
+/* Init macro and function. */
+#define OSQ_LOCK_UNLOCKED { ATOMIC_INIT(OSQ_UNLOCKED_VAL) }
+
+static inline void osq_lock_init(struct optimistic_spin_queue *lock)
+{
+ atomic_set(&lock->tail, OSQ_UNLOCKED_VAL);
+}
+
+#endif
diff --git a/include/linux/platform_data/camera-mx1.h b/include/linux/platform_data/camera-mx1.h
deleted file mode 100644
index 4fd6c70..0000000
--- a/include/linux/platform_data/camera-mx1.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * mx1_camera.h - i.MX1/i.MXL camera driver header file
- *
- * Copyright (c) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
- *
- * Based on PXA camera.h file:
- * Copyright (C) 2003, Intel Corporation
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_CAMERA_H_
-#define __ASM_ARCH_CAMERA_H_
-
-#define MX1_CAMERA_DATA_HIGH 1
-#define MX1_CAMERA_PCLK_RISING 2
-#define MX1_CAMERA_VSYNC_HIGH 4
-
-extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end;
-
-/**
- * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data
- * @mclk_10khz: master clock frequency in 10kHz units
- * @flags: MX1 camera platform flags
- */
-struct mx1_camera_pdata {
- unsigned long mclk_10khz;
- unsigned long flags;
-};
-
-#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/include/linux/platform_data/usb-ehci-mxc.h b/include/linux/platform_data/usb-ehci-mxc.h
index 7eb9d13..157e71f 100644
--- a/include/linux/platform_data/usb-ehci-mxc.h
+++ b/include/linux/platform_data/usb-ehci-mxc.h
@@ -1,46 +1,6 @@
#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
-#define MXC_EHCI_FORCE_FS (1 << 24)
-#define MXC_EHCI_UTMI_8BIT (0 << 28)
-#define MXC_EHCI_UTMI_16BIT (1 << 28)
-#define MXC_EHCI_SERIAL (1 << 29)
-#define MXC_EHCI_MODE_UTMI (0 << 30)
-#define MXC_EHCI_MODE_PHILIPS (1 << 30)
-#define MXC_EHCI_MODE_ULPI (2 << 30)
-#define MXC_EHCI_MODE_SERIAL (3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
-#define MXC_EHCI_INTERFACE_MASK (0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
-#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
-#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
-#define MXC_EHCI_TTL_ENABLED (1 << 8)
-
-#define MXC_EHCI_INTERNAL_PHY (1 << 9)
-#define MXC_EHCI_IPPUE_DOWN (1 << 10)
-#define MXC_EHCI_IPPUE_UP (1 << 11)
-#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
-#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
-
-#define MXC_USBCTRL_OFFSET 0
-#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
-#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
-#define MXC_USBH2CTRL_OFFSET 0x14
-
-#define MX5_USBOTHER_REGS_OFFSET 0x800
-
-/* USB_PHY_CTRL_FUNC2*/
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0
-
struct mxc_usbh_platform_data {
int (*init)(struct platform_device *pdev);
int (*exit)(struct platform_device *pdev);
@@ -49,11 +9,5 @@
struct usb_phy *otg;
};
-int mx51_initialize_usb_hw(int port, unsigned int flags);
-int mx25_initialize_usb_hw(int port, unsigned int flags);
-int mx31_initialize_usb_hw(int port, unsigned int flags);
-int mx35_initialize_usb_hw(int port, unsigned int flags);
-int mx27_initialize_usb_hw(int port, unsigned int flags);
-
#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
diff --git a/include/linux/platform_data/usb-imx_udc.h b/include/linux/platform_data/usb-imx_udc.h
deleted file mode 100644
index be27337..0000000
--- a/include/linux/platform_data/usb-imx_udc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_USB
-#define __ASM_ARCH_MXC_USB
-
-struct imxusb_platform_data {
- int (*init)(struct device *);
- void (*exit)(struct device *);
-};
-
-#endif /* __ASM_ARCH_MXC_USB */
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 5a75d19..6a94cc8 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -44,7 +44,6 @@
#include <linux/debugobjects.h>
#include <linux/bug.h>
#include <linux/compiler.h>
-#include <linux/percpu.h>
#include <asm/barrier.h>
extern int rcu_expedited; /* for sysctl */
@@ -300,41 +299,6 @@
#endif /* #if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) || defined(CONFIG_SMP) */
/*
- * Hooks for cond_resched() and friends to avoid RCU CPU stall warnings.
- */
-
-#define RCU_COND_RESCHED_LIM 256 /* ms vs. 100s of ms. */
-DECLARE_PER_CPU(int, rcu_cond_resched_count);
-void rcu_resched(void);
-
-/*
- * Is it time to report RCU quiescent states?
- *
- * Note unsynchronized access to rcu_cond_resched_count. Yes, we might
- * increment some random CPU's count, and possibly also load the result from
- * yet another CPU's count. We might even clobber some other CPU's attempt
- * to zero its counter. This is all OK because the goal is not precision,
- * but rather reasonable amortization of rcu_note_context_switch() overhead
- * and extremely high probability of avoiding RCU CPU stall warnings.
- * Note that this function has to be preempted in just the wrong place,
- * many thousands of times in a row, for anything bad to happen.
- */
-static inline bool rcu_should_resched(void)
-{
- return raw_cpu_inc_return(rcu_cond_resched_count) >=
- RCU_COND_RESCHED_LIM;
-}
-
-/*
- * Report quiscent states to RCU if it is time to do so.
- */
-static inline void rcu_cond_resched(void)
-{
- if (unlikely(rcu_should_resched()))
- rcu_resched();
-}
-
-/*
* Infrastructure to implement the synchronize_() primitives in
* TREE_RCU and rcu_barrier_() primitives in TINY_RCU.
*/
@@ -358,9 +322,19 @@
* initialization.
*/
#ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD
+void init_rcu_head(struct rcu_head *head);
+void destroy_rcu_head(struct rcu_head *head);
void init_rcu_head_on_stack(struct rcu_head *head);
void destroy_rcu_head_on_stack(struct rcu_head *head);
#else /* !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
+static inline void init_rcu_head(struct rcu_head *head)
+{
+}
+
+static inline void destroy_rcu_head(struct rcu_head *head)
+{
+}
+
static inline void init_rcu_head_on_stack(struct rcu_head *head)
{
}
diff --git a/include/linux/rwsem-spinlock.h b/include/linux/rwsem-spinlock.h
index d5b13bc..561e861 100644
--- a/include/linux/rwsem-spinlock.h
+++ b/include/linux/rwsem-spinlock.h
@@ -15,13 +15,13 @@
#ifdef __KERNEL__
/*
* the rw-semaphore definition
- * - if activity is 0 then there are no active readers or writers
- * - if activity is +ve then that is the number of active readers
- * - if activity is -1 then there is one active writer
+ * - if count is 0 then there are no active readers or writers
+ * - if count is +ve then that is the number of active readers
+ * - if count is -1 then there is one active writer
* - if wait_list is not empty, then there are processes waiting for the semaphore
*/
struct rw_semaphore {
- __s32 activity;
+ __s32 count;
raw_spinlock_t wait_lock;
struct list_head wait_list;
#ifdef CONFIG_DEBUG_LOCK_ALLOC
diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h
index 8d79708..035d3c5 100644
--- a/include/linux/rwsem.h
+++ b/include/linux/rwsem.h
@@ -13,10 +13,11 @@
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/spinlock.h>
-
#include <linux/atomic.h>
+#ifdef CONFIG_RWSEM_SPIN_ON_OWNER
+#include <linux/osq_lock.h>
+#endif
-struct optimistic_spin_queue;
struct rw_semaphore;
#ifdef CONFIG_RWSEM_GENERIC_SPINLOCK
@@ -25,15 +26,15 @@
/* All arch specific implementations share the same struct */
struct rw_semaphore {
long count;
- raw_spinlock_t wait_lock;
struct list_head wait_list;
-#ifdef CONFIG_SMP
+ raw_spinlock_t wait_lock;
+#ifdef CONFIG_RWSEM_SPIN_ON_OWNER
+ struct optimistic_spin_queue osq; /* spinner MCS lock */
/*
* Write owner. Used as a speculative check to see
* if the owner is running on the cpu.
*/
struct task_struct *owner;
- struct optimistic_spin_queue *osq; /* spinner MCS lock */
#endif
#ifdef CONFIG_DEBUG_LOCK_ALLOC
struct lockdep_map dep_map;
@@ -64,22 +65,19 @@
# define __RWSEM_DEP_MAP_INIT(lockname)
#endif
-#if defined(CONFIG_SMP) && !defined(CONFIG_RWSEM_GENERIC_SPINLOCK)
-#define __RWSEM_INITIALIZER(name) \
- { RWSEM_UNLOCKED_VALUE, \
- __RAW_SPIN_LOCK_UNLOCKED(name.wait_lock), \
- LIST_HEAD_INIT((name).wait_list), \
- NULL, /* owner */ \
- NULL /* mcs lock */ \
- __RWSEM_DEP_MAP_INIT(name) }
+#ifdef CONFIG_RWSEM_SPIN_ON_OWNER
+#define __RWSEM_OPT_INIT(lockname) , .osq = OSQ_LOCK_UNLOCKED, .owner = NULL
#else
-#define __RWSEM_INITIALIZER(name) \
- { RWSEM_UNLOCKED_VALUE, \
- __RAW_SPIN_LOCK_UNLOCKED(name.wait_lock), \
- LIST_HEAD_INIT((name).wait_list) \
- __RWSEM_DEP_MAP_INIT(name) }
+#define __RWSEM_OPT_INIT(lockname)
#endif
+#define __RWSEM_INITIALIZER(name) \
+ { .count = RWSEM_UNLOCKED_VALUE, \
+ .wait_list = LIST_HEAD_INIT((name).wait_list), \
+ .wait_lock = __RAW_SPIN_LOCK_UNLOCKED(name.wait_lock) \
+ __RWSEM_OPT_INIT(name) \
+ __RWSEM_DEP_MAP_INIT(name) }
+
#define DECLARE_RWSEM(name) \
struct rw_semaphore name = __RWSEM_INITIALIZER(name)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 306f4f0..0376b05 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -872,21 +872,21 @@
#define SD_NUMA 0x4000 /* cross-node balancing */
#ifdef CONFIG_SCHED_SMT
-static inline const int cpu_smt_flags(void)
+static inline int cpu_smt_flags(void)
{
return SD_SHARE_CPUCAPACITY | SD_SHARE_PKG_RESOURCES;
}
#endif
#ifdef CONFIG_SCHED_MC
-static inline const int cpu_core_flags(void)
+static inline int cpu_core_flags(void)
{
return SD_SHARE_PKG_RESOURCES;
}
#endif
#ifdef CONFIG_NUMA
-static inline const int cpu_numa_flags(void)
+static inline int cpu_numa_flags(void)
{
return SD_NUMA;
}
@@ -999,7 +999,7 @@
bool cpus_share_cache(int this_cpu, int that_cpu);
typedef const struct cpumask *(*sched_domain_mask_f)(int cpu);
-typedef const int (*sched_domain_flags_f)(void);
+typedef int (*sched_domain_flags_f)(void);
#define SDTL_OVERLAP 0x01
diff --git a/include/net/neighbour.h b/include/net/neighbour.h
index 7277caf..47f4254 100644
--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
@@ -203,7 +203,6 @@
void (*proxy_redo)(struct sk_buff *skb);
char *id;
struct neigh_parms parms;
- /* HACK. gc_* should follow parms without a gap! */
int gc_interval;
int gc_thresh1;
int gc_thresh2;
diff --git a/include/net/netns/ieee802154_6lowpan.h b/include/net/netns/ieee802154_6lowpan.h
index 079030c..e207096 100644
--- a/include/net/netns/ieee802154_6lowpan.h
+++ b/include/net/netns/ieee802154_6lowpan.h
@@ -16,7 +16,7 @@
struct netns_ieee802154_lowpan {
struct netns_sysctl_lowpan sysctl;
struct netns_frags frags;
- u16 max_dsize;
+ int max_dsize;
};
#endif
diff --git a/include/net/sock.h b/include/net/sock.h
index 173cae4..1563507 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1768,9 +1768,11 @@
static inline void
sk_dst_set(struct sock *sk, struct dst_entry *dst)
{
- spin_lock(&sk->sk_dst_lock);
- __sk_dst_set(sk, dst);
- spin_unlock(&sk->sk_dst_lock);
+ struct dst_entry *old_dst;
+
+ sk_tx_queue_clear(sk);
+ old_dst = xchg((__force struct dst_entry **)&sk->sk_dst_cache, dst);
+ dst_release(old_dst);
}
static inline void
@@ -1782,9 +1784,7 @@
static inline void
sk_dst_reset(struct sock *sk)
{
- spin_lock(&sk->sk_dst_lock);
- __sk_dst_reset(sk);
- spin_unlock(&sk->sk_dst_lock);
+ sk_dst_set(sk, NULL);
}
struct dst_entry *__sk_dst_check(struct sock *sk, u32 cookie);
diff --git a/init/calibrate.c b/init/calibrate.c
index 520702d..ce635dc 100644
--- a/init/calibrate.c
+++ b/init/calibrate.c
@@ -262,6 +262,15 @@
return 0;
}
+/*
+ * Indicate the cpu delay calibration is done. This can be used by
+ * architectures to stop accepting delay timer registrations after this point.
+ */
+
+void __attribute__((weak)) calibration_delay_done(void)
+{
+}
+
void calibrate_delay(void)
{
unsigned long lpj;
@@ -301,4 +310,6 @@
loops_per_jiffy = lpj;
printed = true;
+
+ calibration_delay_done();
}
diff --git a/kernel/Kconfig.locks b/kernel/Kconfig.locks
index 35536d9..76768ee 100644
--- a/kernel/Kconfig.locks
+++ b/kernel/Kconfig.locks
@@ -220,9 +220,16 @@
endif
+config ARCH_SUPPORTS_ATOMIC_RMW
+ bool
+
config MUTEX_SPIN_ON_OWNER
def_bool y
- depends on SMP && !DEBUG_MUTEXES
+ depends on SMP && !DEBUG_MUTEXES && ARCH_SUPPORTS_ATOMIC_RMW
+
+config RWSEM_SPIN_ON_OWNER
+ def_bool y
+ depends on SMP && RWSEM_XCHGADD_ALGORITHM && ARCH_SUPPORTS_ATOMIC_RMW
config ARCH_USE_QUEUE_RWLOCK
bool
diff --git a/kernel/events/core.c b/kernel/events/core.c
index a33d9a2b..b0c95f0 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -2320,7 +2320,7 @@
next_parent = rcu_dereference(next_ctx->parent_ctx);
/* If neither context have a parent context; they cannot be clones. */
- if (!parent && !next_parent)
+ if (!parent || !next_parent)
goto unlock;
if (next_parent == ctx || next_ctx == parent || next_parent == parent) {
diff --git a/kernel/locking/mcs_spinlock.c b/kernel/locking/mcs_spinlock.c
index 838dc9e..be9ee15 100644
--- a/kernel/locking/mcs_spinlock.c
+++ b/kernel/locking/mcs_spinlock.c
@@ -14,21 +14,47 @@
* called from interrupt context and we have preemption disabled while
* spinning.
*/
-static DEFINE_PER_CPU_SHARED_ALIGNED(struct optimistic_spin_queue, osq_node);
+static DEFINE_PER_CPU_SHARED_ALIGNED(struct optimistic_spin_node, osq_node);
+
+/*
+ * We use the value 0 to represent "no CPU", thus the encoded value
+ * will be the CPU number incremented by 1.
+ */
+static inline int encode_cpu(int cpu_nr)
+{
+ return cpu_nr + 1;
+}
+
+static inline struct optimistic_spin_node *decode_cpu(int encoded_cpu_val)
+{
+ int cpu_nr = encoded_cpu_val - 1;
+
+ return per_cpu_ptr(&osq_node, cpu_nr);
+}
/*
* Get a stable @node->next pointer, either for unlock() or unqueue() purposes.
* Can return NULL in case we were the last queued and we updated @lock instead.
*/
-static inline struct optimistic_spin_queue *
-osq_wait_next(struct optimistic_spin_queue **lock,
- struct optimistic_spin_queue *node,
- struct optimistic_spin_queue *prev)
+static inline struct optimistic_spin_node *
+osq_wait_next(struct optimistic_spin_queue *lock,
+ struct optimistic_spin_node *node,
+ struct optimistic_spin_node *prev)
{
- struct optimistic_spin_queue *next = NULL;
+ struct optimistic_spin_node *next = NULL;
+ int curr = encode_cpu(smp_processor_id());
+ int old;
+
+ /*
+ * If there is a prev node in queue, then the 'old' value will be
+ * the prev node's CPU #, else it's set to OSQ_UNLOCKED_VAL since if
+ * we're currently last in queue, then the queue will then become empty.
+ */
+ old = prev ? prev->cpu : OSQ_UNLOCKED_VAL;
for (;;) {
- if (*lock == node && cmpxchg(lock, node, prev) == node) {
+ if (atomic_read(&lock->tail) == curr &&
+ atomic_cmpxchg(&lock->tail, curr, old) == curr) {
/*
* We were the last queued, we moved @lock back. @prev
* will now observe @lock and will complete its
@@ -59,18 +85,23 @@
return next;
}
-bool osq_lock(struct optimistic_spin_queue **lock)
+bool osq_lock(struct optimistic_spin_queue *lock)
{
- struct optimistic_spin_queue *node = this_cpu_ptr(&osq_node);
- struct optimistic_spin_queue *prev, *next;
+ struct optimistic_spin_node *node = this_cpu_ptr(&osq_node);
+ struct optimistic_spin_node *prev, *next;
+ int curr = encode_cpu(smp_processor_id());
+ int old;
node->locked = 0;
node->next = NULL;
+ node->cpu = curr;
- node->prev = prev = xchg(lock, node);
- if (likely(prev == NULL))
+ old = atomic_xchg(&lock->tail, curr);
+ if (old == OSQ_UNLOCKED_VAL)
return true;
+ prev = decode_cpu(old);
+ node->prev = prev;
ACCESS_ONCE(prev->next) = node;
/*
@@ -149,20 +180,21 @@
return false;
}
-void osq_unlock(struct optimistic_spin_queue **lock)
+void osq_unlock(struct optimistic_spin_queue *lock)
{
- struct optimistic_spin_queue *node = this_cpu_ptr(&osq_node);
- struct optimistic_spin_queue *next;
+ struct optimistic_spin_node *node, *next;
+ int curr = encode_cpu(smp_processor_id());
/*
* Fast path for the uncontended case.
*/
- if (likely(cmpxchg(lock, node, NULL) == node))
+ if (likely(atomic_cmpxchg(&lock->tail, curr, OSQ_UNLOCKED_VAL) == curr))
return;
/*
* Second most likely case.
*/
+ node = this_cpu_ptr(&osq_node);
next = xchg(&node->next, NULL);
if (next) {
ACCESS_ONCE(next->locked) = 1;
diff --git a/kernel/locking/mcs_spinlock.h b/kernel/locking/mcs_spinlock.h
index a2dbac4..74356dc 100644
--- a/kernel/locking/mcs_spinlock.h
+++ b/kernel/locking/mcs_spinlock.h
@@ -118,12 +118,13 @@
* mutex_lock()/rwsem_down_{read,write}() etc.
*/
-struct optimistic_spin_queue {
- struct optimistic_spin_queue *next, *prev;
+struct optimistic_spin_node {
+ struct optimistic_spin_node *next, *prev;
int locked; /* 1 if lock acquired */
+ int cpu; /* encoded CPU # value */
};
-extern bool osq_lock(struct optimistic_spin_queue **lock);
-extern void osq_unlock(struct optimistic_spin_queue **lock);
+extern bool osq_lock(struct optimistic_spin_queue *lock);
+extern void osq_unlock(struct optimistic_spin_queue *lock);
#endif /* __LINUX_MCS_SPINLOCK_H */
diff --git a/kernel/locking/mutex.c b/kernel/locking/mutex.c
index bc73d33..acca2c1 100644
--- a/kernel/locking/mutex.c
+++ b/kernel/locking/mutex.c
@@ -60,7 +60,7 @@
INIT_LIST_HEAD(&lock->wait_list);
mutex_clear_owner(lock);
#ifdef CONFIG_MUTEX_SPIN_ON_OWNER
- lock->osq = NULL;
+ osq_lock_init(&lock->osq);
#endif
debug_mutex_init(lock, name, key);
diff --git a/kernel/locking/rwsem-spinlock.c b/kernel/locking/rwsem-spinlock.c
index 9be8a91..2c93571 100644
--- a/kernel/locking/rwsem-spinlock.c
+++ b/kernel/locking/rwsem-spinlock.c
@@ -26,7 +26,7 @@
unsigned long flags;
if (raw_spin_trylock_irqsave(&sem->wait_lock, flags)) {
- ret = (sem->activity != 0);
+ ret = (sem->count != 0);
raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
}
return ret;
@@ -46,7 +46,7 @@
debug_check_no_locks_freed((void *)sem, sizeof(*sem));
lockdep_init_map(&sem->dep_map, name, key, 0);
#endif
- sem->activity = 0;
+ sem->count = 0;
raw_spin_lock_init(&sem->wait_lock);
INIT_LIST_HEAD(&sem->wait_list);
}
@@ -95,7 +95,7 @@
waiter = list_entry(next, struct rwsem_waiter, list);
} while (waiter->type != RWSEM_WAITING_FOR_WRITE);
- sem->activity += woken;
+ sem->count += woken;
out:
return sem;
@@ -126,9 +126,9 @@
raw_spin_lock_irqsave(&sem->wait_lock, flags);
- if (sem->activity >= 0 && list_empty(&sem->wait_list)) {
+ if (sem->count >= 0 && list_empty(&sem->wait_list)) {
/* granted */
- sem->activity++;
+ sem->count++;
raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
goto out;
}
@@ -170,9 +170,9 @@
raw_spin_lock_irqsave(&sem->wait_lock, flags);
- if (sem->activity >= 0 && list_empty(&sem->wait_list)) {
+ if (sem->count >= 0 && list_empty(&sem->wait_list)) {
/* granted */
- sem->activity++;
+ sem->count++;
ret = 1;
}
@@ -206,7 +206,7 @@
* itself into sleep and waiting for system woke it or someone
* else in the head of the wait list up.
*/
- if (sem->activity == 0)
+ if (sem->count == 0)
break;
set_task_state(tsk, TASK_UNINTERRUPTIBLE);
raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
@@ -214,7 +214,7 @@
raw_spin_lock_irqsave(&sem->wait_lock, flags);
}
/* got the lock */
- sem->activity = -1;
+ sem->count = -1;
list_del(&waiter.list);
raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
@@ -235,9 +235,9 @@
raw_spin_lock_irqsave(&sem->wait_lock, flags);
- if (sem->activity == 0) {
+ if (sem->count == 0) {
/* got the lock */
- sem->activity = -1;
+ sem->count = -1;
ret = 1;
}
@@ -255,7 +255,7 @@
raw_spin_lock_irqsave(&sem->wait_lock, flags);
- if (--sem->activity == 0 && !list_empty(&sem->wait_list))
+ if (--sem->count == 0 && !list_empty(&sem->wait_list))
sem = __rwsem_wake_one_writer(sem);
raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
@@ -270,7 +270,7 @@
raw_spin_lock_irqsave(&sem->wait_lock, flags);
- sem->activity = 0;
+ sem->count = 0;
if (!list_empty(&sem->wait_list))
sem = __rwsem_do_wake(sem, 1);
@@ -287,7 +287,7 @@
raw_spin_lock_irqsave(&sem->wait_lock, flags);
- sem->activity = 1;
+ sem->count = 1;
if (!list_empty(&sem->wait_list))
sem = __rwsem_do_wake(sem, 0);
diff --git a/kernel/locking/rwsem-xadd.c b/kernel/locking/rwsem-xadd.c
index dacc321..a2391ac 100644
--- a/kernel/locking/rwsem-xadd.c
+++ b/kernel/locking/rwsem-xadd.c
@@ -82,9 +82,9 @@
sem->count = RWSEM_UNLOCKED_VALUE;
raw_spin_lock_init(&sem->wait_lock);
INIT_LIST_HEAD(&sem->wait_list);
-#ifdef CONFIG_SMP
+#ifdef CONFIG_RWSEM_SPIN_ON_OWNER
sem->owner = NULL;
- sem->osq = NULL;
+ osq_lock_init(&sem->osq);
#endif
}
@@ -262,7 +262,7 @@
return false;
}
-#ifdef CONFIG_SMP
+#ifdef CONFIG_RWSEM_SPIN_ON_OWNER
/*
* Try to acquire write lock before the writer has been put on wait queue.
*/
@@ -285,10 +285,10 @@
static inline bool rwsem_can_spin_on_owner(struct rw_semaphore *sem)
{
struct task_struct *owner;
- bool on_cpu = true;
+ bool on_cpu = false;
if (need_resched())
- return 0;
+ return false;
rcu_read_lock();
owner = ACCESS_ONCE(sem->owner);
@@ -297,9 +297,9 @@
rcu_read_unlock();
/*
- * If sem->owner is not set, the rwsem owner may have
- * just acquired it and not set the owner yet or the rwsem
- * has been released.
+ * If sem->owner is not set, yet we have just recently entered the
+ * slowpath, then there is a possibility reader(s) may have the lock.
+ * To be safe, avoid spinning in these situations.
*/
return on_cpu;
}
diff --git a/kernel/locking/rwsem.c b/kernel/locking/rwsem.c
index 42f806d..e2d3bc7 100644
--- a/kernel/locking/rwsem.c
+++ b/kernel/locking/rwsem.c
@@ -12,7 +12,7 @@
#include <linux/atomic.h>
-#if defined(CONFIG_SMP) && defined(CONFIG_RWSEM_XCHGADD_ALGORITHM)
+#ifdef CONFIG_RWSEM_SPIN_ON_OWNER
static inline void rwsem_set_owner(struct rw_semaphore *sem)
{
sem->owner = current;
diff --git a/kernel/power/process.c b/kernel/power/process.c
index 0ca8d83..4ee194e 100644
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -186,6 +186,7 @@
printk("Restarting tasks ... ");
+ __usermodehelper_set_disable_depth(UMH_FREEZING);
thaw_workqueues();
read_lock(&tasklist_lock);
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 4dd8822..ed35a47 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -306,7 +306,7 @@
error = suspend_ops->begin(state);
if (error)
goto Close;
- } else if (state == PM_SUSPEND_FREEZE && freeze_ops->begin) {
+ } else if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->begin) {
error = freeze_ops->begin();
if (error)
goto Close;
@@ -335,7 +335,7 @@
Close:
if (need_suspend_ops(state) && suspend_ops->end)
suspend_ops->end();
- else if (state == PM_SUSPEND_FREEZE && freeze_ops->end)
+ else if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->end)
freeze_ops->end();
return error;
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index f1ba773..625d0b0 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -206,6 +206,70 @@
rdp->passed_quiesce = 1;
}
+static DEFINE_PER_CPU(int, rcu_sched_qs_mask);
+
+static DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = {
+ .dynticks_nesting = DYNTICK_TASK_EXIT_IDLE,
+ .dynticks = ATOMIC_INIT(1),
+#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
+ .dynticks_idle_nesting = DYNTICK_TASK_NEST_VALUE,
+ .dynticks_idle = ATOMIC_INIT(1),
+#endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
+};
+
+/*
+ * Let the RCU core know that this CPU has gone through the scheduler,
+ * which is a quiescent state. This is called when the need for a
+ * quiescent state is urgent, so we burn an atomic operation and full
+ * memory barriers to let the RCU core know about it, regardless of what
+ * this CPU might (or might not) do in the near future.
+ *
+ * We inform the RCU core by emulating a zero-duration dyntick-idle
+ * period, which we in turn do by incrementing the ->dynticks counter
+ * by two.
+ */
+static void rcu_momentary_dyntick_idle(void)
+{
+ unsigned long flags;
+ struct rcu_data *rdp;
+ struct rcu_dynticks *rdtp;
+ int resched_mask;
+ struct rcu_state *rsp;
+
+ local_irq_save(flags);
+
+ /*
+ * Yes, we can lose flag-setting operations. This is OK, because
+ * the flag will be set again after some delay.
+ */
+ resched_mask = raw_cpu_read(rcu_sched_qs_mask);
+ raw_cpu_write(rcu_sched_qs_mask, 0);
+
+ /* Find the flavor that needs a quiescent state. */
+ for_each_rcu_flavor(rsp) {
+ rdp = raw_cpu_ptr(rsp->rda);
+ if (!(resched_mask & rsp->flavor_mask))
+ continue;
+ smp_mb(); /* rcu_sched_qs_mask before cond_resched_completed. */
+ if (ACCESS_ONCE(rdp->mynode->completed) !=
+ ACCESS_ONCE(rdp->cond_resched_completed))
+ continue;
+
+ /*
+ * Pretend to be momentarily idle for the quiescent state.
+ * This allows the grace-period kthread to record the
+ * quiescent state, with no need for this CPU to do anything
+ * further.
+ */
+ rdtp = this_cpu_ptr(&rcu_dynticks);
+ smp_mb__before_atomic(); /* Earlier stuff before QS. */
+ atomic_add(2, &rdtp->dynticks); /* QS. */
+ smp_mb__after_atomic(); /* Later stuff after QS. */
+ break;
+ }
+ local_irq_restore(flags);
+}
+
/*
* Note a context switch. This is a quiescent state for RCU-sched,
* and requires special handling for preemptible RCU.
@@ -216,19 +280,12 @@
trace_rcu_utilization(TPS("Start context switch"));
rcu_sched_qs(cpu);
rcu_preempt_note_context_switch(cpu);
+ if (unlikely(raw_cpu_read(rcu_sched_qs_mask)))
+ rcu_momentary_dyntick_idle();
trace_rcu_utilization(TPS("End context switch"));
}
EXPORT_SYMBOL_GPL(rcu_note_context_switch);
-static DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = {
- .dynticks_nesting = DYNTICK_TASK_EXIT_IDLE,
- .dynticks = ATOMIC_INIT(1),
-#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
- .dynticks_idle_nesting = DYNTICK_TASK_NEST_VALUE,
- .dynticks_idle = ATOMIC_INIT(1),
-#endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
-};
-
static long blimit = 10; /* Maximum callbacks per rcu_do_batch. */
static long qhimark = 10000; /* If this many pending, ignore blimit. */
static long qlowmark = 100; /* Once only this many pending, use blimit. */
@@ -243,6 +300,13 @@
module_param(jiffies_till_first_fqs, ulong, 0644);
module_param(jiffies_till_next_fqs, ulong, 0644);
+/*
+ * How long the grace period must be before we start recruiting
+ * quiescent-state help from rcu_note_context_switch().
+ */
+static ulong jiffies_till_sched_qs = HZ / 20;
+module_param(jiffies_till_sched_qs, ulong, 0644);
+
static bool rcu_start_gp_advanced(struct rcu_state *rsp, struct rcu_node *rnp,
struct rcu_data *rdp);
static void force_qs_rnp(struct rcu_state *rsp,
@@ -853,6 +917,7 @@
bool *isidle, unsigned long *maxj)
{
unsigned int curr;
+ int *rcrmp;
unsigned int snap;
curr = (unsigned int)atomic_add_return(0, &rdp->dynticks->dynticks);
@@ -893,27 +958,43 @@
}
/*
- * There is a possibility that a CPU in adaptive-ticks state
- * might run in the kernel with the scheduling-clock tick disabled
- * for an extended time period. Invoke rcu_kick_nohz_cpu() to
- * force the CPU to restart the scheduling-clock tick in this
- * CPU is in this state.
+ * A CPU running for an extended time within the kernel can
+ * delay RCU grace periods. When the CPU is in NO_HZ_FULL mode,
+ * even context-switching back and forth between a pair of
+ * in-kernel CPU-bound tasks cannot advance grace periods.
+ * So if the grace period is old enough, make the CPU pay attention.
+ * Note that the unsynchronized assignments to the per-CPU
+ * rcu_sched_qs_mask variable are safe. Yes, setting of
+ * bits can be lost, but they will be set again on the next
+ * force-quiescent-state pass. So lost bit sets do not result
+ * in incorrect behavior, merely in a grace period lasting
+ * a few jiffies longer than it might otherwise. Because
+ * there are at most four threads involved, and because the
+ * updates are only once every few jiffies, the probability of
+ * lossage (and thus of slight grace-period extension) is
+ * quite low.
+ *
+ * Note that if the jiffies_till_sched_qs boot/sysfs parameter
+ * is set too high, we override with half of the RCU CPU stall
+ * warning delay.
*/
- rcu_kick_nohz_cpu(rdp->cpu);
-
- /*
- * Alternatively, the CPU might be running in the kernel
- * for an extended period of time without a quiescent state.
- * Attempt to force the CPU through the scheduler to gain the
- * needed quiescent state, but only if the grace period has gone
- * on for an uncommonly long time. If there are many stuck CPUs,
- * we will beat on the first one until it gets unstuck, then move
- * to the next. Only do this for the primary flavor of RCU.
- */
- if (rdp->rsp == rcu_state_p &&
+ rcrmp = &per_cpu(rcu_sched_qs_mask, rdp->cpu);
+ if (ULONG_CMP_GE(jiffies,
+ rdp->rsp->gp_start + jiffies_till_sched_qs) ||
ULONG_CMP_GE(jiffies, rdp->rsp->jiffies_resched)) {
- rdp->rsp->jiffies_resched += 5;
- resched_cpu(rdp->cpu);
+ if (!(ACCESS_ONCE(*rcrmp) & rdp->rsp->flavor_mask)) {
+ ACCESS_ONCE(rdp->cond_resched_completed) =
+ ACCESS_ONCE(rdp->mynode->completed);
+ smp_mb(); /* ->cond_resched_completed before *rcrmp. */
+ ACCESS_ONCE(*rcrmp) =
+ ACCESS_ONCE(*rcrmp) + rdp->rsp->flavor_mask;
+ resched_cpu(rdp->cpu); /* Force CPU into scheduler. */
+ rdp->rsp->jiffies_resched += 5; /* Enable beating. */
+ } else if (ULONG_CMP_GE(jiffies, rdp->rsp->jiffies_resched)) {
+ /* Time to beat on that CPU again! */
+ resched_cpu(rdp->cpu); /* Force CPU into scheduler. */
+ rdp->rsp->jiffies_resched += 5; /* Re-enable beating. */
+ }
}
return 0;
@@ -3491,6 +3572,7 @@
"rcu_node_fqs_1",
"rcu_node_fqs_2",
"rcu_node_fqs_3" }; /* Match MAX_RCU_LVLS */
+ static u8 fl_mask = 0x1;
int cpustride = 1;
int i;
int j;
@@ -3509,6 +3591,8 @@
for (i = 1; i < rcu_num_lvls; i++)
rsp->level[i] = rsp->level[i - 1] + rsp->levelcnt[i - 1];
rcu_init_levelspread(rsp);
+ rsp->flavor_mask = fl_mask;
+ fl_mask <<= 1;
/* Initialize the elements themselves, starting from the leaves. */
diff --git a/kernel/rcu/tree.h b/kernel/rcu/tree.h
index bf2c1e6..0f69a79 100644
--- a/kernel/rcu/tree.h
+++ b/kernel/rcu/tree.h
@@ -307,6 +307,9 @@
/* 4) reasons this CPU needed to be kicked by force_quiescent_state */
unsigned long dynticks_fqs; /* Kicked due to dynticks idle. */
unsigned long offline_fqs; /* Kicked due to being offline. */
+ unsigned long cond_resched_completed;
+ /* Grace period that needs help */
+ /* from cond_resched(). */
/* 5) __rcu_pending() statistics. */
unsigned long n_rcu_pending; /* rcu_pending() calls since boot. */
@@ -392,6 +395,7 @@
struct rcu_node *level[RCU_NUM_LVLS]; /* Hierarchy levels. */
u32 levelcnt[MAX_RCU_LVLS + 1]; /* # nodes in each level. */
u8 levelspread[RCU_NUM_LVLS]; /* kids/node in each level. */
+ u8 flavor_mask; /* bit in flavor mask. */
struct rcu_data __percpu *rda; /* pointer of percu rcu_data. */
void (*call)(struct rcu_head *head, /* call_rcu() flavor. */
void (*func)(struct rcu_head *head));
@@ -563,7 +567,7 @@
static void do_nocb_deferred_wakeup(struct rcu_data *rdp);
static void rcu_boot_init_nocb_percpu_data(struct rcu_data *rdp);
static void rcu_spawn_nocb_kthreads(struct rcu_state *rsp);
-static void rcu_kick_nohz_cpu(int cpu);
+static void __maybe_unused rcu_kick_nohz_cpu(int cpu);
static bool init_nocb_callback_list(struct rcu_data *rdp);
static void rcu_sysidle_enter(struct rcu_dynticks *rdtp, int irq);
static void rcu_sysidle_exit(struct rcu_dynticks *rdtp, int irq);
diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
index cbc2c45..02ac0fb 100644
--- a/kernel/rcu/tree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -2404,7 +2404,7 @@
* if an adaptive-ticks CPU is failing to respond to the current grace
* period and has not be idle from an RCU perspective, kick it.
*/
-static void rcu_kick_nohz_cpu(int cpu)
+static void __maybe_unused rcu_kick_nohz_cpu(int cpu)
{
#ifdef CONFIG_NO_HZ_FULL
if (tick_nohz_full_cpu(cpu))
diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c
index a2aeb4d..bc78835 100644
--- a/kernel/rcu/update.c
+++ b/kernel/rcu/update.c
@@ -200,12 +200,12 @@
EXPORT_SYMBOL_GPL(wait_rcu_gp);
#ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD
-static inline void debug_init_rcu_head(struct rcu_head *head)
+void init_rcu_head(struct rcu_head *head)
{
debug_object_init(head, &rcuhead_debug_descr);
}
-static inline void debug_rcu_head_free(struct rcu_head *head)
+void destroy_rcu_head(struct rcu_head *head)
{
debug_object_free(head, &rcuhead_debug_descr);
}
@@ -350,21 +350,3 @@
early_initcall(check_cpu_stall_init);
#endif /* #ifdef CONFIG_RCU_STALL_COMMON */
-
-/*
- * Hooks for cond_resched() and friends to avoid RCU CPU stall warnings.
- */
-
-DEFINE_PER_CPU(int, rcu_cond_resched_count);
-
-/*
- * Report a set of RCU quiescent states, for use by cond_resched()
- * and friends. Out of line due to being called infrequently.
- */
-void rcu_resched(void)
-{
- preempt_disable();
- __this_cpu_write(rcu_cond_resched_count, 0);
- rcu_note_context_switch(smp_processor_id());
- preempt_enable();
-}
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 3bdf01b..bc1638b 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -4147,7 +4147,6 @@
int __sched _cond_resched(void)
{
- rcu_cond_resched();
if (should_resched()) {
__cond_resched();
return 1;
@@ -4166,18 +4165,15 @@
*/
int __cond_resched_lock(spinlock_t *lock)
{
- bool need_rcu_resched = rcu_should_resched();
int resched = should_resched();
int ret = 0;
lockdep_assert_held(lock);
- if (spin_needbreak(lock) || resched || need_rcu_resched) {
+ if (spin_needbreak(lock) || resched) {
spin_unlock(lock);
if (resched)
__cond_resched();
- else if (unlikely(need_rcu_resched))
- rcu_resched();
else
cpu_relax();
ret = 1;
@@ -4191,7 +4187,6 @@
{
BUG_ON(!in_softirq());
- rcu_cond_resched(); /* BH disabled OK, just recording QSes. */
if (should_resched()) {
local_bh_enable();
__cond_resched();
diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c
index 695f977..627b3c3 100644
--- a/kernel/sched/debug.c
+++ b/kernel/sched/debug.c
@@ -608,7 +608,7 @@
avg_atom = p->se.sum_exec_runtime;
if (nr_switches)
- do_div(avg_atom, nr_switches);
+ avg_atom = div64_ul(avg_atom, nr_switches);
else
avg_atom = -1LL;
diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index 88c9c65..fe75444 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -585,9 +585,14 @@
struct itimerspec *new_setting,
struct itimerspec *old_setting)
{
+ ktime_t exp;
+
if (!rtcdev)
return -ENOTSUPP;
+ if (flags & ~TIMER_ABSTIME)
+ return -EINVAL;
+
if (old_setting)
alarm_timer_get(timr, old_setting);
@@ -597,8 +602,16 @@
/* start the timer */
timr->it.alarm.interval = timespec_to_ktime(new_setting->it_interval);
- alarm_start(&timr->it.alarm.alarmtimer,
- timespec_to_ktime(new_setting->it_value));
+ exp = timespec_to_ktime(new_setting->it_value);
+ /* Convert (if necessary) to absolute time */
+ if (flags != TIMER_ABSTIME) {
+ ktime_t now;
+
+ now = alarm_bases[timr->it.alarm.alarmtimer.type].gettime();
+ exp = ktime_add(now, exp);
+ }
+
+ alarm_start(&timr->it.alarm.alarmtimer, exp);
return 0;
}
@@ -730,6 +743,9 @@
if (!alarmtimer_get_rtcdev())
return -ENOTSUPP;
+ if (flags & ~TIMER_ABSTIME)
+ return -EINVAL;
+
if (!capable(CAP_WAKE_ALARM))
return -EPERM;
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 5b372e3..ac9d1da 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -265,12 +265,12 @@
func = ftrace_ops_list_func;
}
+ update_function_graph_func();
+
/* If there's no change, then do nothing more here */
if (ftrace_trace_function == func)
return;
- update_function_graph_func();
-
/*
* If we are using the list function, it doesn't care
* about the function_trace_ops.
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 7c56c3d..ff70271 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -616,10 +616,6 @@
struct ring_buffer_per_cpu *cpu_buffer;
struct rb_irq_work *work;
- if ((cpu == RING_BUFFER_ALL_CPUS && !ring_buffer_empty(buffer)) ||
- (cpu != RING_BUFFER_ALL_CPUS && !ring_buffer_empty_cpu(buffer, cpu)))
- return POLLIN | POLLRDNORM;
-
if (cpu == RING_BUFFER_ALL_CPUS)
work = &buffer->irq_work;
else {
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index f243444..bda9621 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -466,6 +466,12 @@
struct print_entry *entry;
unsigned long irq_flags;
int alloc;
+ int pc;
+
+ if (!(trace_flags & TRACE_ITER_PRINTK))
+ return 0;
+
+ pc = preempt_count();
if (unlikely(tracing_selftest_running || tracing_disabled))
return 0;
@@ -475,7 +481,7 @@
local_save_flags(irq_flags);
buffer = global_trace.trace_buffer.buffer;
event = trace_buffer_lock_reserve(buffer, TRACE_PRINT, alloc,
- irq_flags, preempt_count());
+ irq_flags, pc);
if (!event)
return 0;
@@ -492,6 +498,7 @@
entry->buf[size] = '\0';
__buffer_unlock_commit(buffer, event);
+ ftrace_trace_stack(buffer, irq_flags, 4, pc);
return size;
}
@@ -509,6 +516,12 @@
struct bputs_entry *entry;
unsigned long irq_flags;
int size = sizeof(struct bputs_entry);
+ int pc;
+
+ if (!(trace_flags & TRACE_ITER_PRINTK))
+ return 0;
+
+ pc = preempt_count();
if (unlikely(tracing_selftest_running || tracing_disabled))
return 0;
@@ -516,7 +529,7 @@
local_save_flags(irq_flags);
buffer = global_trace.trace_buffer.buffer;
event = trace_buffer_lock_reserve(buffer, TRACE_BPUTS, size,
- irq_flags, preempt_count());
+ irq_flags, pc);
if (!event)
return 0;
@@ -525,6 +538,7 @@
entry->str = str;
__buffer_unlock_commit(buffer, event);
+ ftrace_trace_stack(buffer, irq_flags, 4, pc);
return 1;
}
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index f99e0b3..2de53628 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -470,6 +470,7 @@
list_del(&file->list);
remove_subsystem(file->system);
+ free_event_filter(file->filter);
kmem_cache_free(file_cachep, file);
}
diff --git a/lib/cpumask.c b/lib/cpumask.c
index c101230..b6513a9 100644
--- a/lib/cpumask.c
+++ b/lib/cpumask.c
@@ -191,7 +191,7 @@
i %= num_online_cpus();
- if (!cpumask_of_node(numa_node)) {
+ if (numa_node == -1 || !cpumask_of_node(numa_node)) {
/* Use all online cpu's for non numa aware system */
cpumask_copy(mask, cpu_online_mask);
} else {
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index ad2ac3c..dd11f61 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -627,8 +627,6 @@
struct vlan_dev_priv *vlan = vlan_dev_priv(dev);
int i;
- free_percpu(vlan->vlan_pcpu_stats);
- vlan->vlan_pcpu_stats = NULL;
for (i = 0; i < ARRAY_SIZE(vlan->egress_priority_map); i++) {
while ((pm = vlan->egress_priority_map[i]) != NULL) {
vlan->egress_priority_map[i] = pm->next;
@@ -785,6 +783,15 @@
.ndo_get_lock_subclass = vlan_dev_get_lock_subclass,
};
+static void vlan_dev_free(struct net_device *dev)
+{
+ struct vlan_dev_priv *vlan = vlan_dev_priv(dev);
+
+ free_percpu(vlan->vlan_pcpu_stats);
+ vlan->vlan_pcpu_stats = NULL;
+ free_netdev(dev);
+}
+
void vlan_setup(struct net_device *dev)
{
ether_setup(dev);
@@ -794,7 +801,7 @@
dev->tx_queue_len = 0;
dev->netdev_ops = &vlan_netdev_ops;
- dev->destructor = free_netdev;
+ dev->destructor = vlan_dev_free;
dev->ethtool_ops = &vlan_ethtool_ops;
memset(dev->broadcast, 0, ETH_ALEN);
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 01a1082..bfcf6be 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -1489,8 +1489,6 @@
goto drop;
/* Queue packet (standard) */
- skb->sk = sock;
-
if (sock_queue_rcv_skb(sock, skb) < 0)
goto drop;
@@ -1644,7 +1642,6 @@
if (!skb)
goto out;
- skb->sk = sk;
skb_reserve(skb, ddp_dl->header_length);
skb_reserve(skb, dev->hard_header_len);
skb->dev = dev;
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index ca01d18..a7a27bc 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -289,10 +289,20 @@
{
struct hci_conn *conn = container_of(work, struct hci_conn,
disc_work.work);
+ int refcnt = atomic_read(&conn->refcnt);
BT_DBG("hcon %p state %s", conn, state_to_string(conn->state));
- if (atomic_read(&conn->refcnt))
+ WARN_ON(refcnt < 0);
+
+ /* FIXME: It was observed that in pairing failed scenario, refcnt
+ * drops below 0. Probably this is because l2cap_conn_del calls
+ * l2cap_chan_del for each channel, and inside l2cap_chan_del conn is
+ * dropped. After that loop hci_chan_del is called which also drops
+ * conn. For now make sure that ACL is alive if refcnt is higher then 0,
+ * otherwise drop it.
+ */
+ if (refcnt > 0)
return;
switch (conn->state) {
diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c
index f2829a7..e33a982 100644
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -385,6 +385,16 @@
{ CFM_PASSKEY, CFM_PASSKEY, REQ_PASSKEY, JUST_WORKS, OVERLAP },
};
+static u8 get_auth_method(struct smp_chan *smp, u8 local_io, u8 remote_io)
+{
+ /* If either side has unknown io_caps, use JUST WORKS */
+ if (local_io > SMP_IO_KEYBOARD_DISPLAY ||
+ remote_io > SMP_IO_KEYBOARD_DISPLAY)
+ return JUST_WORKS;
+
+ return gen_method[remote_io][local_io];
+}
+
static int tk_request(struct l2cap_conn *conn, u8 remote_oob, u8 auth,
u8 local_io, u8 remote_io)
{
@@ -401,14 +411,11 @@
BT_DBG("tk_request: auth:%d lcl:%d rem:%d", auth, local_io, remote_io);
/* If neither side wants MITM, use JUST WORKS */
- /* If either side has unknown io_caps, use JUST WORKS */
/* Otherwise, look up method from the table */
- if (!(auth & SMP_AUTH_MITM) ||
- local_io > SMP_IO_KEYBOARD_DISPLAY ||
- remote_io > SMP_IO_KEYBOARD_DISPLAY)
+ if (!(auth & SMP_AUTH_MITM))
method = JUST_WORKS;
else
- method = gen_method[remote_io][local_io];
+ method = get_auth_method(smp, local_io, remote_io);
/* If not bonding, don't ask user to confirm a Zero TK */
if (!(auth & SMP_AUTH_BONDING) && method == JUST_CFM)
@@ -669,7 +676,7 @@
{
struct smp_cmd_pairing rsp, *req = (void *) skb->data;
struct smp_chan *smp;
- u8 key_size, auth;
+ u8 key_size, auth, sec_level;
int ret;
BT_DBG("conn %p", conn);
@@ -695,7 +702,19 @@
/* We didn't start the pairing, so match remote */
auth = req->auth_req;
- conn->hcon->pending_sec_level = authreq_to_seclevel(auth);
+ sec_level = authreq_to_seclevel(auth);
+ if (sec_level > conn->hcon->pending_sec_level)
+ conn->hcon->pending_sec_level = sec_level;
+
+ /* If we need MITM check that it can be acheived */
+ if (conn->hcon->pending_sec_level >= BT_SECURITY_HIGH) {
+ u8 method;
+
+ method = get_auth_method(smp, conn->hcon->io_capability,
+ req->io_capability);
+ if (method == JUST_WORKS || method == JUST_CFM)
+ return SMP_AUTH_REQUIREMENTS;
+ }
build_pairing_cmd(conn, req, &rsp, auth);
@@ -743,6 +762,16 @@
if (check_enc_key_size(conn, key_size))
return SMP_ENC_KEY_SIZE;
+ /* If we need MITM check that it can be acheived */
+ if (conn->hcon->pending_sec_level >= BT_SECURITY_HIGH) {
+ u8 method;
+
+ method = get_auth_method(smp, req->io_capability,
+ rsp->io_capability);
+ if (method == JUST_WORKS || method == JUST_CFM)
+ return SMP_AUTH_REQUIREMENTS;
+ }
+
get_random_bytes(smp->prnd, sizeof(smp->prnd));
smp->prsp[0] = SMP_CMD_PAIRING_RSP;
@@ -838,6 +867,7 @@
struct smp_cmd_pairing cp;
struct hci_conn *hcon = conn->hcon;
struct smp_chan *smp;
+ u8 sec_level;
BT_DBG("conn %p", conn);
@@ -847,7 +877,9 @@
if (!(conn->hcon->link_mode & HCI_LM_MASTER))
return SMP_CMD_NOTSUPP;
- hcon->pending_sec_level = authreq_to_seclevel(rp->auth_req);
+ sec_level = authreq_to_seclevel(rp->auth_req);
+ if (sec_level > hcon->pending_sec_level)
+ hcon->pending_sec_level = sec_level;
if (smp_ltk_encrypt(conn, hcon->pending_sec_level))
return 0;
@@ -901,9 +933,12 @@
if (smp_sufficient_security(hcon, sec_level))
return 1;
+ if (sec_level > hcon->pending_sec_level)
+ hcon->pending_sec_level = sec_level;
+
if (hcon->link_mode & HCI_LM_MASTER)
- if (smp_ltk_encrypt(conn, sec_level))
- goto done;
+ if (smp_ltk_encrypt(conn, hcon->pending_sec_level))
+ return 0;
if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags))
return 0;
@@ -918,7 +953,7 @@
* requires it.
*/
if (hcon->io_capability != HCI_IO_NO_INPUT_OUTPUT ||
- sec_level > BT_SECURITY_MEDIUM)
+ hcon->pending_sec_level > BT_SECURITY_MEDIUM)
authreq |= SMP_AUTH_MITM;
if (hcon->link_mode & HCI_LM_MASTER) {
@@ -937,9 +972,6 @@
set_bit(SMP_FLAG_INITIATOR, &smp->flags);
-done:
- hcon->pending_sec_level = sec_level;
-
return 0;
}
diff --git a/net/core/dev.c b/net/core/dev.c
index 30eedf6..7990984 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -148,6 +148,9 @@
static struct list_head offload_base __read_mostly;
static int netif_rx_internal(struct sk_buff *skb);
+static int call_netdevice_notifiers_info(unsigned long val,
+ struct net_device *dev,
+ struct netdev_notifier_info *info);
/*
* The @dev_base_head list is protected by @dev_base_lock and the rtnl
@@ -1207,7 +1210,11 @@
void netdev_state_change(struct net_device *dev)
{
if (dev->flags & IFF_UP) {
- call_netdevice_notifiers(NETDEV_CHANGE, dev);
+ struct netdev_notifier_change_info change_info;
+
+ change_info.flags_changed = 0;
+ call_netdevice_notifiers_info(NETDEV_CHANGE, dev,
+ &change_info.info);
rtmsg_ifinfo(RTM_NEWLINK, dev, 0, GFP_KERNEL);
}
}
@@ -4227,9 +4234,8 @@
#endif
napi->weight = weight_p;
local_irq_disable();
- while (work < quota) {
+ while (1) {
struct sk_buff *skb;
- unsigned int qlen;
while ((skb = __skb_dequeue(&sd->process_queue))) {
local_irq_enable();
@@ -4243,24 +4249,24 @@
}
rps_lock(sd);
- qlen = skb_queue_len(&sd->input_pkt_queue);
- if (qlen)
- skb_queue_splice_tail_init(&sd->input_pkt_queue,
- &sd->process_queue);
-
- if (qlen < quota - work) {
+ if (skb_queue_empty(&sd->input_pkt_queue)) {
/*
* Inline a custom version of __napi_complete().
* only current cpu owns and manipulates this napi,
- * and NAPI_STATE_SCHED is the only possible flag set on backlog.
- * we can use a plain write instead of clear_bit(),
+ * and NAPI_STATE_SCHED is the only possible flag set
+ * on backlog.
+ * We can use a plain write instead of clear_bit(),
* and we dont need an smp_mb() memory barrier.
*/
list_del(&napi->poll_list);
napi->state = 0;
+ rps_unlock(sd);
- quota = work + qlen;
+ break;
}
+
+ skb_queue_splice_tail_init(&sd->input_pkt_queue,
+ &sd->process_queue);
rps_unlock(sd);
}
local_irq_enable();
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 32d872e..559890b 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -3059,11 +3059,12 @@
memset(&t->neigh_vars[NEIGH_VAR_GC_INTERVAL], 0,
sizeof(t->neigh_vars[NEIGH_VAR_GC_INTERVAL]));
} else {
+ struct neigh_table *tbl = p->tbl;
dev_name_source = "default";
- t->neigh_vars[NEIGH_VAR_GC_INTERVAL].data = (int *)(p + 1);
- t->neigh_vars[NEIGH_VAR_GC_THRESH1].data = (int *)(p + 1) + 1;
- t->neigh_vars[NEIGH_VAR_GC_THRESH2].data = (int *)(p + 1) + 2;
- t->neigh_vars[NEIGH_VAR_GC_THRESH3].data = (int *)(p + 1) + 3;
+ t->neigh_vars[NEIGH_VAR_GC_INTERVAL].data = &tbl->gc_interval;
+ t->neigh_vars[NEIGH_VAR_GC_THRESH1].data = &tbl->gc_thresh1;
+ t->neigh_vars[NEIGH_VAR_GC_THRESH2].data = &tbl->gc_thresh2;
+ t->neigh_vars[NEIGH_VAR_GC_THRESH3].data = &tbl->gc_thresh3;
}
if (handler) {
diff --git a/net/ipv4/gre_demux.c b/net/ipv4/gre_demux.c
index 4e9619b..0485bf7 100644
--- a/net/ipv4/gre_demux.c
+++ b/net/ipv4/gre_demux.c
@@ -68,6 +68,7 @@
skb_push(skb, hdr_len);
+ skb_reset_transport_header(skb);
greh = (struct gre_base_hdr *)skb->data;
greh->flags = tnl_flags_to_gre_flags(tpi->flags);
greh->protocol = tpi->proto;
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 79c3d94..42b7bcf 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -739,8 +739,6 @@
/* fall through */
case 0:
info = ntohs(icmph->un.frag.mtu);
- if (!info)
- goto out;
}
break;
case ICMP_SR_FAILED:
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 6748d42..db710b0 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -1944,6 +1944,10 @@
rtnl_lock();
in_dev = ip_mc_find_dev(net, imr);
+ if (!in_dev) {
+ ret = -ENODEV;
+ goto out;
+ }
ifindex = imr->imr_ifindex;
for (imlp = &inet->mc_list;
(iml = rtnl_dereference(*imlp)) != NULL;
@@ -1961,16 +1965,14 @@
*imlp = iml->next_rcu;
- if (in_dev)
- ip_mc_dec_group(in_dev, group);
+ ip_mc_dec_group(in_dev, group);
rtnl_unlock();
/* decrease mem now to avoid the memleak warning */
atomic_sub(sizeof(*iml), &sk->sk_omem_alloc);
kfree_rcu(iml, rcu);
return 0;
}
- if (!in_dev)
- ret = -ENODEV;
+out:
rtnl_unlock();
return ret;
}
diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c
index 54b6731..6f9de61 100644
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -169,6 +169,7 @@
hlist_for_each_entry_rcu(t, head, hash_node) {
if (remote != t->parms.iph.daddr ||
+ t->parms.iph.saddr != 0 ||
!(t->dev->flags & IFF_UP))
continue;
@@ -185,10 +186,11 @@
head = &itn->tunnels[hash];
hlist_for_each_entry_rcu(t, head, hash_node) {
- if ((local != t->parms.iph.saddr &&
- (local != t->parms.iph.daddr ||
- !ipv4_is_multicast(local))) ||
- !(t->dev->flags & IFF_UP))
+ if ((local != t->parms.iph.saddr || t->parms.iph.daddr != 0) &&
+ (local != t->parms.iph.daddr || !ipv4_is_multicast(local)))
+ continue;
+
+ if (!(t->dev->flags & IFF_UP))
continue;
if (!ip_tunnel_key_match(&t->parms, flags, key))
@@ -205,6 +207,8 @@
hlist_for_each_entry_rcu(t, head, hash_node) {
if (t->parms.i_key != key ||
+ t->parms.iph.saddr != 0 ||
+ t->parms.iph.daddr != 0 ||
!(t->dev->flags & IFF_UP))
continue;
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 082239f..3162ea9 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1010,7 +1010,7 @@
const struct iphdr *iph = (const struct iphdr *) skb->data;
struct flowi4 fl4;
struct rtable *rt;
- struct dst_entry *dst;
+ struct dst_entry *odst = NULL;
bool new = false;
bh_lock_sock(sk);
@@ -1018,16 +1018,17 @@
if (!ip_sk_accept_pmtu(sk))
goto out;
- rt = (struct rtable *) __sk_dst_get(sk);
+ odst = sk_dst_get(sk);
- if (sock_owned_by_user(sk) || !rt) {
+ if (sock_owned_by_user(sk) || !odst) {
__ipv4_sk_update_pmtu(skb, sk, mtu);
goto out;
}
__build_flow_key(&fl4, sk, iph, 0, 0, 0, 0, 0);
- if (!__sk_dst_check(sk, 0)) {
+ rt = (struct rtable *)odst;
+ if (odst->obsolete && odst->ops->check(odst, 0) == NULL) {
rt = ip_route_output_flow(sock_net(sk), &fl4, sk);
if (IS_ERR(rt))
goto out;
@@ -1037,8 +1038,7 @@
__ip_rt_update_pmtu((struct rtable *) rt->dst.path, &fl4, mtu);
- dst = dst_check(&rt->dst, 0);
- if (!dst) {
+ if (!dst_check(&rt->dst, 0)) {
if (new)
dst_release(&rt->dst);
@@ -1050,10 +1050,11 @@
}
if (new)
- __sk_dst_set(sk, &rt->dst);
+ sk_dst_set(sk, &rt->dst);
out:
bh_unlock_sock(sk);
+ dst_release(odst);
}
EXPORT_SYMBOL_GPL(ipv4_sk_update_pmtu);
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index eb1dde3..9d2118e 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1108,7 +1108,7 @@
if (unlikely(tp->repair)) {
if (tp->repair_queue == TCP_RECV_QUEUE) {
copied = tcp_send_rcvq(sk, msg, size);
- goto out;
+ goto out_nopush;
}
err = -EINVAL;
@@ -1282,6 +1282,7 @@
out:
if (copied)
tcp_push(sk, flags, mss_now, tp->nonagle, size_goal);
+out_nopush:
release_sock(sk);
return copied + copied_syn;
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index b5c2375..40639c2 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1106,7 +1106,7 @@
}
/* D-SACK for already forgotten data... Do dumb counting. */
- if (dup_sack && tp->undo_marker && tp->undo_retrans &&
+ if (dup_sack && tp->undo_marker && tp->undo_retrans > 0 &&
!after(end_seq_0, prior_snd_una) &&
after(end_seq_0, tp->undo_marker))
tp->undo_retrans--;
@@ -1187,7 +1187,7 @@
/* Account D-SACK for retransmitted packet. */
if (dup_sack && (sacked & TCPCB_RETRANS)) {
- if (tp->undo_marker && tp->undo_retrans &&
+ if (tp->undo_marker && tp->undo_retrans > 0 &&
after(end_seq, tp->undo_marker))
tp->undo_retrans--;
if (sacked & TCPCB_SACKED_ACKED)
@@ -1893,7 +1893,7 @@
tp->lost_out = 0;
tp->undo_marker = 0;
- tp->undo_retrans = 0;
+ tp->undo_retrans = -1;
}
void tcp_clear_retrans(struct tcp_sock *tp)
@@ -2665,7 +2665,7 @@
tp->prior_ssthresh = 0;
tp->undo_marker = tp->snd_una;
- tp->undo_retrans = tp->retrans_out;
+ tp->undo_retrans = tp->retrans_out ? : -1;
if (inet_csk(sk)->icsk_ca_state < TCP_CA_CWR) {
if (!ece_ack)
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index d92bce0..179b51e 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2525,8 +2525,6 @@
if (!tp->retrans_stamp)
tp->retrans_stamp = TCP_SKB_CB(skb)->when;
- tp->undo_retrans += tcp_skb_pcount(skb);
-
/* snd_nxt is stored to detect loss of retransmitted segment,
* see tcp_input.c tcp_sacktag_write_queue().
*/
@@ -2534,6 +2532,10 @@
} else if (err != -EBUSY) {
NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPRETRANSFAIL);
}
+
+ if (tp->undo_retrans < 0)
+ tp->undo_retrans = 0;
+ tp->undo_retrans += tcp_skb_pcount(skb);
return err;
}
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index d92f94b..7d5a866 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1588,8 +1588,11 @@
goto csum_error;
- if (sk_rcvqueues_full(sk, skb, sk->sk_rcvbuf))
+ if (sk_rcvqueues_full(sk, skb, sk->sk_rcvbuf)) {
+ UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_RCVBUFERRORS,
+ is_udplite);
goto drop;
+ }
rc = 0;
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 08b367c..617f095 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1301,8 +1301,17 @@
len = ntohs(ipv6_hdr(skb)->payload_len) + sizeof(struct ipv6hdr);
len -= skb_network_header_len(skb);
- /* Drop queries with not link local source */
- if (!(ipv6_addr_type(&ipv6_hdr(skb)->saddr) & IPV6_ADDR_LINKLOCAL))
+ /* RFC3810 6.2
+ * Upon reception of an MLD message that contains a Query, the node
+ * checks if the source address of the message is a valid link-local
+ * address, if the Hop Limit is set to 1, and if the Router Alert
+ * option is present in the Hop-By-Hop Options header of the IPv6
+ * packet. If any of these checks fails, the packet is dropped.
+ */
+ if (!(ipv6_addr_type(&ipv6_hdr(skb)->saddr) & IPV6_ADDR_LINKLOCAL) ||
+ ipv6_hdr(skb)->hop_limit != 1 ||
+ !(IP6CB(skb)->flags & IP6SKB_ROUTERALERT) ||
+ IP6CB(skb)->ra != htons(IPV6_OPT_ROUTERALERT_MLD))
return -EINVAL;
idev = __in6_dev_get(skb->dev);
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 95c8347..7092ff7 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -674,8 +674,11 @@
goto csum_error;
}
- if (sk_rcvqueues_full(sk, skb, sk->sk_rcvbuf))
+ if (sk_rcvqueues_full(sk, skb, sk->sk_rcvbuf)) {
+ UDP6_INC_STATS_BH(sock_net(sk),
+ UDP_MIB_RCVBUFERRORS, is_udplite);
goto drop;
+ }
skb_dst_drop(skb);
@@ -690,6 +693,7 @@
bh_unlock_sock(sk);
return rc;
+
csum_error:
UDP6_INC_STATS_BH(sock_net(sk), UDP_MIB_CSUMERRORS, is_udplite);
drop:
diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c
index 950909f..13752d9 100644
--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -1365,7 +1365,7 @@
int err;
if (level != SOL_PPPOL2TP)
- return udp_prot.setsockopt(sk, level, optname, optval, optlen);
+ return -EINVAL;
if (optlen < sizeof(int))
return -EINVAL;
@@ -1491,7 +1491,7 @@
struct pppol2tp_session *ps;
if (level != SOL_PPPOL2TP)
- return udp_prot.getsockopt(sk, level, optname, optval, optlen);
+ return -EINVAL;
if (get_user(len, optlen))
return -EFAULT;
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 6886601..a6cda52 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1096,11 +1096,12 @@
int err;
/* 24 + 6 = header + auth_algo + auth_transaction + status_code */
- skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24 + 6 + extra_len);
+ skb = dev_alloc_skb(local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN +
+ 24 + 6 + extra_len + IEEE80211_WEP_ICV_LEN);
if (!skb)
return;
- skb_reserve(skb, local->hw.extra_tx_headroom);
+ skb_reserve(skb, local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN);
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24 + 6);
memset(mgmt, 0, 24 + 6);
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 15c731f..e6fac7e 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -636,7 +636,7 @@
while (nlk->cb_running && netlink_dump_space(nlk)) {
err = netlink_dump(sk);
if (err < 0) {
- sk->sk_err = err;
+ sk->sk_err = -err;
sk->sk_error_report(sk);
break;
}
@@ -2483,7 +2483,7 @@
atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf / 2) {
ret = netlink_dump(sk);
if (ret) {
- sk->sk_err = ret;
+ sk->sk_err = -ret;
sk->sk_error_report(sk);
}
}
diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c
index c36856a..e70d8b1 100644
--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -551,6 +551,8 @@
case OVS_ACTION_ATTR_SAMPLE:
err = sample(dp, skb, a);
+ if (unlikely(err)) /* skb already freed. */
+ return err;
break;
}
diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c
index 0d407bc..9db4bf6 100644
--- a/net/openvswitch/datapath.c
+++ b/net/openvswitch/datapath.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2007-2013 Nicira, Inc.
+ * Copyright (c) 2007-2014 Nicira, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
@@ -276,7 +276,7 @@
OVS_CB(skb)->flow = flow;
OVS_CB(skb)->pkt_key = &key;
- ovs_flow_stats_update(OVS_CB(skb)->flow, skb);
+ ovs_flow_stats_update(OVS_CB(skb)->flow, key.tp.flags, skb);
ovs_execute_actions(dp, skb);
stats_counter = &stats->n_hit;
@@ -889,8 +889,11 @@
}
/* The unmasked key has to be the same for flow updates. */
if (unlikely(!ovs_flow_cmp_unmasked_key(flow, &match))) {
- error = -EEXIST;
- goto err_unlock_ovs;
+ flow = ovs_flow_tbl_lookup_exact(&dp->table, &match);
+ if (!flow) {
+ error = -ENOENT;
+ goto err_unlock_ovs;
+ }
}
/* Update actions. */
old_acts = ovsl_dereference(flow->sf_acts);
@@ -981,16 +984,12 @@
goto err_unlock_ovs;
}
/* Check that the flow exists. */
- flow = ovs_flow_tbl_lookup(&dp->table, &key);
+ flow = ovs_flow_tbl_lookup_exact(&dp->table, &match);
if (unlikely(!flow)) {
error = -ENOENT;
goto err_unlock_ovs;
}
- /* The unmasked key has to be the same for flow updates. */
- if (unlikely(!ovs_flow_cmp_unmasked_key(flow, &match))) {
- error = -EEXIST;
- goto err_unlock_ovs;
- }
+
/* Update actions, if present. */
if (likely(acts)) {
old_acts = ovsl_dereference(flow->sf_acts);
@@ -1063,8 +1062,8 @@
goto unlock;
}
- flow = ovs_flow_tbl_lookup(&dp->table, &key);
- if (!flow || !ovs_flow_cmp_unmasked_key(flow, &match)) {
+ flow = ovs_flow_tbl_lookup_exact(&dp->table, &match);
+ if (!flow) {
err = -ENOENT;
goto unlock;
}
@@ -1113,8 +1112,8 @@
goto unlock;
}
- flow = ovs_flow_tbl_lookup(&dp->table, &key);
- if (unlikely(!flow || !ovs_flow_cmp_unmasked_key(flow, &match))) {
+ flow = ovs_flow_tbl_lookup_exact(&dp->table, &match);
+ if (unlikely(!flow)) {
err = -ENOENT;
goto unlock;
}
diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c
index 334751c..d07ab53 100644
--- a/net/openvswitch/flow.c
+++ b/net/openvswitch/flow.c
@@ -61,10 +61,10 @@
#define TCP_FLAGS_BE16(tp) (*(__be16 *)&tcp_flag_word(tp) & htons(0x0FFF))
-void ovs_flow_stats_update(struct sw_flow *flow, struct sk_buff *skb)
+void ovs_flow_stats_update(struct sw_flow *flow, __be16 tcp_flags,
+ struct sk_buff *skb)
{
struct flow_stats *stats;
- __be16 tcp_flags = flow->key.tp.flags;
int node = numa_node_id();
stats = rcu_dereference(flow->stats[node]);
diff --git a/net/openvswitch/flow.h b/net/openvswitch/flow.h
index ac395d2..5e5aaed 100644
--- a/net/openvswitch/flow.h
+++ b/net/openvswitch/flow.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2007-2013 Nicira, Inc.
+ * Copyright (c) 2007-2014 Nicira, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
@@ -180,7 +180,8 @@
unsigned char ar_tip[4]; /* target IP address */
} __packed;
-void ovs_flow_stats_update(struct sw_flow *, struct sk_buff *);
+void ovs_flow_stats_update(struct sw_flow *, __be16 tcp_flags,
+ struct sk_buff *);
void ovs_flow_stats_get(const struct sw_flow *, struct ovs_flow_stats *,
unsigned long *used, __be16 *tcp_flags);
void ovs_flow_stats_clear(struct sw_flow *);
diff --git a/net/openvswitch/flow_table.c b/net/openvswitch/flow_table.c
index 574c3ab..cf2d853 100644
--- a/net/openvswitch/flow_table.c
+++ b/net/openvswitch/flow_table.c
@@ -456,6 +456,22 @@
return ovs_flow_tbl_lookup_stats(tbl, key, &n_mask_hit);
}
+struct sw_flow *ovs_flow_tbl_lookup_exact(struct flow_table *tbl,
+ struct sw_flow_match *match)
+{
+ struct table_instance *ti = rcu_dereference_ovsl(tbl->ti);
+ struct sw_flow_mask *mask;
+ struct sw_flow *flow;
+
+ /* Always called under ovs-mutex. */
+ list_for_each_entry(mask, &tbl->mask_list, list) {
+ flow = masked_flow_lookup(ti, match->key, mask);
+ if (flow && ovs_flow_cmp_unmasked_key(flow, match)) /* Found */
+ return flow;
+ }
+ return NULL;
+}
+
int ovs_flow_tbl_num_masks(const struct flow_table *table)
{
struct sw_flow_mask *mask;
diff --git a/net/openvswitch/flow_table.h b/net/openvswitch/flow_table.h
index ca8a582..5918bff 100644
--- a/net/openvswitch/flow_table.h
+++ b/net/openvswitch/flow_table.h
@@ -76,7 +76,8 @@
u32 *n_mask_hit);
struct sw_flow *ovs_flow_tbl_lookup(struct flow_table *,
const struct sw_flow_key *);
-
+struct sw_flow *ovs_flow_tbl_lookup_exact(struct flow_table *tbl,
+ struct sw_flow_match *match);
bool ovs_flow_cmp_unmasked_key(const struct sw_flow *flow,
struct sw_flow_match *match);
diff --git a/net/openvswitch/vport-gre.c b/net/openvswitch/vport-gre.c
index 35ec4fe..f49148a 100644
--- a/net/openvswitch/vport-gre.c
+++ b/net/openvswitch/vport-gre.c
@@ -110,6 +110,22 @@
return PACKET_RCVD;
}
+/* Called with rcu_read_lock and BH disabled. */
+static int gre_err(struct sk_buff *skb, u32 info,
+ const struct tnl_ptk_info *tpi)
+{
+ struct ovs_net *ovs_net;
+ struct vport *vport;
+
+ ovs_net = net_generic(dev_net(skb->dev), ovs_net_id);
+ vport = rcu_dereference(ovs_net->vport_net.gre_vport);
+
+ if (unlikely(!vport))
+ return PACKET_REJECT;
+ else
+ return PACKET_RCVD;
+}
+
static int gre_tnl_send(struct vport *vport, struct sk_buff *skb)
{
struct net *net = ovs_dp_get_net(vport->dp);
@@ -186,6 +202,7 @@
static struct gre_cisco_protocol gre_protocol = {
.handler = gre_rcv,
+ .err_handler = gre_err,
.priority = 1,
};
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index 85c6465..b6842fd 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -366,9 +366,10 @@
* specification [SCTP] and any extensions for a list of possible
* error formats.
*/
-struct sctp_ulpevent *sctp_ulpevent_make_remote_error(
- const struct sctp_association *asoc, struct sctp_chunk *chunk,
- __u16 flags, gfp_t gfp)
+struct sctp_ulpevent *
+sctp_ulpevent_make_remote_error(const struct sctp_association *asoc,
+ struct sctp_chunk *chunk, __u16 flags,
+ gfp_t gfp)
{
struct sctp_ulpevent *event;
struct sctp_remote_error *sre;
@@ -387,8 +388,7 @@
/* Copy the skb to a new skb with room for us to prepend
* notification with.
*/
- skb = skb_copy_expand(chunk->skb, sizeof(struct sctp_remote_error),
- 0, gfp);
+ skb = skb_copy_expand(chunk->skb, sizeof(*sre), 0, gfp);
/* Pull off the rest of the cause TLV from the chunk. */
skb_pull(chunk->skb, elen);
@@ -399,62 +399,21 @@
event = sctp_skb2event(skb);
sctp_ulpevent_init(event, MSG_NOTIFICATION, skb->truesize);
- sre = (struct sctp_remote_error *)
- skb_push(skb, sizeof(struct sctp_remote_error));
+ sre = (struct sctp_remote_error *) skb_push(skb, sizeof(*sre));
/* Trim the buffer to the right length. */
- skb_trim(skb, sizeof(struct sctp_remote_error) + elen);
+ skb_trim(skb, sizeof(*sre) + elen);
- /* Socket Extensions for SCTP
- * 5.3.1.3 SCTP_REMOTE_ERROR
- *
- * sre_type:
- * It should be SCTP_REMOTE_ERROR.
- */
+ /* RFC6458, Section 6.1.3. SCTP_REMOTE_ERROR */
+ memset(sre, 0, sizeof(*sre));
sre->sre_type = SCTP_REMOTE_ERROR;
-
- /*
- * Socket Extensions for SCTP
- * 5.3.1.3 SCTP_REMOTE_ERROR
- *
- * sre_flags: 16 bits (unsigned integer)
- * Currently unused.
- */
sre->sre_flags = 0;
-
- /* Socket Extensions for SCTP
- * 5.3.1.3 SCTP_REMOTE_ERROR
- *
- * sre_length: sizeof (__u32)
- *
- * This field is the total length of the notification data,
- * including the notification header.
- */
sre->sre_length = skb->len;
-
- /* Socket Extensions for SCTP
- * 5.3.1.3 SCTP_REMOTE_ERROR
- *
- * sre_error: 16 bits (unsigned integer)
- * This value represents one of the Operational Error causes defined in
- * the SCTP specification, in network byte order.
- */
sre->sre_error = cause;
-
- /* Socket Extensions for SCTP
- * 5.3.1.3 SCTP_REMOTE_ERROR
- *
- * sre_assoc_id: sizeof (sctp_assoc_t)
- *
- * The association id field, holds the identifier for the association.
- * All notifications for a given association have the same association
- * identifier. For TCP style socket, this field is ignored.
- */
sctp_ulpevent_set_owner(event, asoc);
sre->sre_assoc_id = sctp_assoc2id(asoc);
return event;
-
fail:
return NULL;
}
@@ -899,7 +858,9 @@
return notification->sn_header.sn_type;
}
-/* Copy out the sndrcvinfo into a msghdr. */
+/* RFC6458, Section 5.3.2. SCTP Header Information Structure
+ * (SCTP_SNDRCV, DEPRECATED)
+ */
void sctp_ulpevent_read_sndrcvinfo(const struct sctp_ulpevent *event,
struct msghdr *msghdr)
{
@@ -908,74 +869,21 @@
if (sctp_ulpevent_is_notification(event))
return;
- /* Sockets API Extensions for SCTP
- * Section 5.2.2 SCTP Header Information Structure (SCTP_SNDRCV)
- *
- * sinfo_stream: 16 bits (unsigned integer)
- *
- * For recvmsg() the SCTP stack places the message's stream number in
- * this value.
- */
+ memset(&sinfo, 0, sizeof(sinfo));
sinfo.sinfo_stream = event->stream;
- /* sinfo_ssn: 16 bits (unsigned integer)
- *
- * For recvmsg() this value contains the stream sequence number that
- * the remote endpoint placed in the DATA chunk. For fragmented
- * messages this is the same number for all deliveries of the message
- * (if more than one recvmsg() is needed to read the message).
- */
sinfo.sinfo_ssn = event->ssn;
- /* sinfo_ppid: 32 bits (unsigned integer)
- *
- * In recvmsg() this value is
- * the same information that was passed by the upper layer in the peer
- * application. Please note that byte order issues are NOT accounted
- * for and this information is passed opaquely by the SCTP stack from
- * one end to the other.
- */
sinfo.sinfo_ppid = event->ppid;
- /* sinfo_flags: 16 bits (unsigned integer)
- *
- * This field may contain any of the following flags and is composed of
- * a bitwise OR of these values.
- *
- * recvmsg() flags:
- *
- * SCTP_UNORDERED - This flag is present when the message was sent
- * non-ordered.
- */
sinfo.sinfo_flags = event->flags;
- /* sinfo_tsn: 32 bit (unsigned integer)
- *
- * For the receiving side, this field holds a TSN that was
- * assigned to one of the SCTP Data Chunks.
- */
sinfo.sinfo_tsn = event->tsn;
- /* sinfo_cumtsn: 32 bit (unsigned integer)
- *
- * This field will hold the current cumulative TSN as
- * known by the underlying SCTP layer. Note this field is
- * ignored when sending and only valid for a receive
- * operation when sinfo_flags are set to SCTP_UNORDERED.
- */
sinfo.sinfo_cumtsn = event->cumtsn;
- /* sinfo_assoc_id: sizeof (sctp_assoc_t)
- *
- * The association handle field, sinfo_assoc_id, holds the identifier
- * for the association announced in the COMMUNICATION_UP notification.
- * All notifications for a given association have the same identifier.
- * Ignored for one-to-one style sockets.
- */
sinfo.sinfo_assoc_id = sctp_assoc2id(event->asoc);
-
- /* context value that is set via SCTP_CONTEXT socket option. */
+ /* Context value that is set via SCTP_CONTEXT socket option. */
sinfo.sinfo_context = event->asoc->default_rcv_context;
-
/* These fields are not used while receiving. */
sinfo.sinfo_timetolive = 0;
put_cmsg(msghdr, IPPROTO_SCTP, SCTP_SNDRCV,
- sizeof(struct sctp_sndrcvinfo), (void *)&sinfo);
+ sizeof(sinfo), &sinfo);
}
/* Do accounting for bytes received and hold a reference to the association
diff --git a/net/tipc/bcast.c b/net/tipc/bcast.c
index 2663167..55c6c9d 100644
--- a/net/tipc/bcast.c
+++ b/net/tipc/bcast.c
@@ -559,6 +559,7 @@
buf = node->bclink.deferred_head;
node->bclink.deferred_head = buf->next;
+ buf->next = NULL;
node->bclink.deferred_size--;
goto receive;
}
diff --git a/net/tipc/msg.c b/net/tipc/msg.c
index 8be6e94..0a37a47 100644
--- a/net/tipc/msg.c
+++ b/net/tipc/msg.c
@@ -101,9 +101,11 @@
}
/* tipc_buf_append(): Append a buffer to the fragment list of another buffer
- * Let first buffer become head buffer
- * Returns 1 and sets *buf to headbuf if chain is complete, otherwise 0
- * Leaves headbuf pointer at NULL if failure
+ * @*headbuf: in: NULL for first frag, otherwise value returned from prev call
+ * out: set when successful non-complete reassembly, otherwise NULL
+ * @*buf: in: the buffer to append. Always defined
+ * out: head buf after sucessful complete reassembly, otherwise NULL
+ * Returns 1 when reassembly complete, otherwise 0
*/
int tipc_buf_append(struct sk_buff **headbuf, struct sk_buff **buf)
{
@@ -122,6 +124,7 @@
goto out_free;
head = *headbuf = frag;
skb_frag_list_init(head);
+ *buf = NULL;
return 0;
}
if (!head)
@@ -150,5 +153,7 @@
out_free:
pr_warn_ratelimited("Unable to build fragment list\n");
kfree_skb(*buf);
+ kfree_skb(*headbuf);
+ *buf = *headbuf = NULL;
return 0;
}
diff --git a/net/wireless/core.h b/net/wireless/core.h
index e9afbf1..7e3a3ce 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -424,7 +424,7 @@
if (end >= start)
return jiffies_to_msecs(end - start);
- return jiffies_to_msecs(end + (MAX_JIFFY_OFFSET - start) + 1);
+ return jiffies_to_msecs(end + (ULONG_MAX - start) + 1);
}
void
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ba4f172..6668daf 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1497,18 +1497,17 @@
}
CMD(start_p2p_device, START_P2P_DEVICE);
CMD(set_mcast_rate, SET_MCAST_RATE);
+#ifdef CONFIG_NL80211_TESTMODE
+ CMD(testmode_cmd, TESTMODE);
+#endif
if (state->split) {
CMD(crit_proto_start, CRIT_PROTOCOL_START);
CMD(crit_proto_stop, CRIT_PROTOCOL_STOP);
if (rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH)
CMD(channel_switch, CHANNEL_SWITCH);
+ CMD(set_qos_map, SET_QOS_MAP);
}
- CMD(set_qos_map, SET_QOS_MAP);
-
-#ifdef CONFIG_NL80211_TESTMODE
- CMD(testmode_cmd, TESTMODE);
-#endif
-
+ /* add into the if now */
#undef CMD
if (rdev->ops->connect || rdev->ops->auth) {
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 558b0e3..1afdf45 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -935,7 +935,7 @@
if (!band_rule_found)
band_rule_found = freq_in_rule_band(fr, center_freq);
- bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(5));
+ bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20));
if (band_rule_found && bw_fits)
return rr;
@@ -1019,10 +1019,10 @@
}
#endif
-/* Find an ieee80211_reg_rule such that a 5MHz channel with frequency
- * chan->center_freq fits there.
- * If there is no such reg_rule, disable the channel, otherwise set the
- * flags corresponding to the bandwidths allowed in the particular reg_rule
+/*
+ * Note that right now we assume the desired channel bandwidth
+ * is always 20 MHz for each individual channel (HT40 uses 20 MHz
+ * per channel, the primary and the extension channel).
*/
static void handle_channel(struct wiphy *wiphy,
enum nl80211_reg_initiator initiator,
@@ -1083,12 +1083,8 @@
if (reg_rule->flags & NL80211_RRF_AUTO_BW)
max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
- if (max_bandwidth_khz < MHZ_TO_KHZ(10))
- bw_flags = IEEE80211_CHAN_NO_10MHZ;
- if (max_bandwidth_khz < MHZ_TO_KHZ(20))
- bw_flags |= IEEE80211_CHAN_NO_20MHZ;
if (max_bandwidth_khz < MHZ_TO_KHZ(40))
- bw_flags |= IEEE80211_CHAN_NO_HT40;
+ bw_flags = IEEE80211_CHAN_NO_HT40;
if (max_bandwidth_khz < MHZ_TO_KHZ(80))
bw_flags |= IEEE80211_CHAN_NO_80MHZ;
if (max_bandwidth_khz < MHZ_TO_KHZ(160))
@@ -1522,12 +1518,8 @@
if (reg_rule->flags & NL80211_RRF_AUTO_BW)
max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
- if (max_bandwidth_khz < MHZ_TO_KHZ(10))
- bw_flags = IEEE80211_CHAN_NO_10MHZ;
- if (max_bandwidth_khz < MHZ_TO_KHZ(20))
- bw_flags |= IEEE80211_CHAN_NO_20MHZ;
if (max_bandwidth_khz < MHZ_TO_KHZ(40))
- bw_flags |= IEEE80211_CHAN_NO_HT40;
+ bw_flags = IEEE80211_CHAN_NO_HT40;
if (max_bandwidth_khz < MHZ_TO_KHZ(80))
bw_flags |= IEEE80211_CHAN_NO_80MHZ;
if (max_bandwidth_khz < MHZ_TO_KHZ(160))
diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
index 480bbdd..6df04d9 100644
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -193,7 +193,8 @@
dsp_unlock(azx_dev);
return azx_dev;
}
- if (!res)
+ if (!res ||
+ (chip->driver_caps & AZX_DCAPS_REVERSE_ASSIGN))
res = azx_dev;
}
dsp_unlock(azx_dev);
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index b6b4e71..83cd190 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -227,7 +227,7 @@
/* quirks for Intel PCH */
#define AZX_DCAPS_INTEL_PCH_NOPM \
(AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_BUFSIZE | \
- AZX_DCAPS_COUNT_LPIB_DELAY)
+ AZX_DCAPS_COUNT_LPIB_DELAY | AZX_DCAPS_REVERSE_ASSIGN)
#define AZX_DCAPS_INTEL_PCH \
(AZX_DCAPS_INTEL_PCH_NOPM | AZX_DCAPS_PM_RUNTIME)
@@ -596,7 +596,7 @@
struct azx *chip = card->private_data;
struct azx_pcm *p;
- if (chip->disabled)
+ if (chip->disabled || chip->init_failed)
return 0;
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
@@ -628,7 +628,7 @@
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip = card->private_data;
- if (chip->disabled)
+ if (chip->disabled || chip->init_failed)
return 0;
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) {
@@ -665,7 +665,7 @@
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip = card->private_data;
- if (chip->disabled)
+ if (chip->disabled || chip->init_failed)
return 0;
if (!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
@@ -692,7 +692,7 @@
struct hda_codec *codec;
int status;
- if (chip->disabled)
+ if (chip->disabled || chip->init_failed)
return 0;
if (!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
@@ -729,7 +729,7 @@
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip = card->private_data;
- if (chip->disabled)
+ if (chip->disabled || chip->init_failed)
return 0;
if (!power_save_controller ||
diff --git a/sound/pci/hda/hda_priv.h b/sound/pci/hda/hda_priv.h
index 4a7cb01..e9d1a57 100644
--- a/sound/pci/hda/hda_priv.h
+++ b/sound/pci/hda/hda_priv.h
@@ -186,6 +186,7 @@
#define AZX_DCAPS_BUFSIZE (1 << 21) /* no buffer size alignment */
#define AZX_DCAPS_ALIGN_BUFSIZE (1 << 22) /* buffer size alignment */
#define AZX_DCAPS_4K_BDLE_BOUNDARY (1 << 23) /* BDLE in 4k boundary */
+#define AZX_DCAPS_REVERSE_ASSIGN (1 << 24) /* Assign devices in reverse order */
#define AZX_DCAPS_COUNT_LPIB_DELAY (1 << 25) /* Take LPIB as delay */
#define AZX_DCAPS_PM_RUNTIME (1 << 26) /* runtime PM support */
#define AZX_DCAPS_I915_POWERWELL (1 << 27) /* HSW i915 powerwell support */
diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c
index a366ba9..358414d 100644
--- a/sound/pci/hda/hda_tegra.c
+++ b/sound/pci/hda/hda_tegra.c
@@ -236,6 +236,7 @@
return rc;
}
+#ifdef CONFIG_PM_SLEEP
static void hda_tegra_disable_clocks(struct hda_tegra *data)
{
clk_disable_unprepare(data->hda2hdmi_clk);
@@ -243,7 +244,6 @@
clk_disable_unprepare(data->hda_clk);
}
-#ifdef CONFIG_PM_SLEEP
/*
* power management
*/
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 4fe876b..ba4ca52 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -3337,6 +3337,7 @@
{ .id = 0x10de0051, .name = "GPU 51 HDMI/DP", .patch = patch_nvhdmi },
{ .id = 0x10de0060, .name = "GPU 60 HDMI/DP", .patch = patch_nvhdmi },
{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch },
+{ .id = 0x10de0070, .name = "GPU 70 HDMI/DP", .patch = patch_nvhdmi },
{ .id = 0x10de0071, .name = "GPU 71 HDMI/DP", .patch = patch_nvhdmi },
{ .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi_2ch },
{ .id = 0x11069f80, .name = "VX900 HDMI/DP", .patch = patch_via_hdmi },
@@ -3394,6 +3395,7 @@
MODULE_ALIAS("snd-hda-codec-id:10de0051");
MODULE_ALIAS("snd-hda-codec-id:10de0060");
MODULE_ALIAS("snd-hda-codec-id:10de0067");
+MODULE_ALIAS("snd-hda-codec-id:10de0070");
MODULE_ALIAS("snd-hda-codec-id:10de0071");
MODULE_ALIAS("snd-hda-codec-id:10de8001");
MODULE_ALIAS("snd-hda-codec-id:11069f80");
diff --git a/tools/lib/lockdep/include/liblockdep/mutex.h b/tools/lib/lockdep/include/liblockdep/mutex.h
index c342f70..ee53a42 100644
--- a/tools/lib/lockdep/include/liblockdep/mutex.h
+++ b/tools/lib/lockdep/include/liblockdep/mutex.h
@@ -35,7 +35,7 @@
static inline int liblockdep_pthread_mutex_lock(liblockdep_pthread_mutex_t *lock)
{
- lock_acquire(&lock->dep_map, 0, 0, 0, 2, NULL, (unsigned long)_RET_IP_);
+ lock_acquire(&lock->dep_map, 0, 0, 0, 1, NULL, (unsigned long)_RET_IP_);
return pthread_mutex_lock(&lock->mutex);
}
@@ -47,7 +47,7 @@
static inline int liblockdep_pthread_mutex_trylock(liblockdep_pthread_mutex_t *lock)
{
- lock_acquire(&lock->dep_map, 0, 1, 0, 2, NULL, (unsigned long)_RET_IP_);
+ lock_acquire(&lock->dep_map, 0, 1, 0, 1, NULL, (unsigned long)_RET_IP_);
return pthread_mutex_trylock(&lock->mutex) == 0 ? 1 : 0;
}
diff --git a/tools/lib/lockdep/include/liblockdep/rwlock.h b/tools/lib/lockdep/include/liblockdep/rwlock.h
index a680ab8..4ec03f8 100644
--- a/tools/lib/lockdep/include/liblockdep/rwlock.h
+++ b/tools/lib/lockdep/include/liblockdep/rwlock.h
@@ -36,7 +36,7 @@
static inline int liblockdep_pthread_rwlock_rdlock(liblockdep_pthread_rwlock_t *lock)
{
- lock_acquire(&lock->dep_map, 0, 0, 2, 2, NULL, (unsigned long)_RET_IP_);
+ lock_acquire(&lock->dep_map, 0, 0, 2, 1, NULL, (unsigned long)_RET_IP_);
return pthread_rwlock_rdlock(&lock->rwlock);
}
@@ -49,19 +49,19 @@
static inline int liblockdep_pthread_rwlock_wrlock(liblockdep_pthread_rwlock_t *lock)
{
- lock_acquire(&lock->dep_map, 0, 0, 0, 2, NULL, (unsigned long)_RET_IP_);
+ lock_acquire(&lock->dep_map, 0, 0, 0, 1, NULL, (unsigned long)_RET_IP_);
return pthread_rwlock_wrlock(&lock->rwlock);
}
static inline int liblockdep_pthread_rwlock_tryrdlock(liblockdep_pthread_rwlock_t *lock)
{
- lock_acquire(&lock->dep_map, 0, 1, 2, 2, NULL, (unsigned long)_RET_IP_);
+ lock_acquire(&lock->dep_map, 0, 1, 2, 1, NULL, (unsigned long)_RET_IP_);
return pthread_rwlock_tryrdlock(&lock->rwlock) == 0 ? 1 : 0;
}
static inline int liblockdep_pthread_rwlock_trywlock(liblockdep_pthread_rwlock_t *lock)
{
- lock_acquire(&lock->dep_map, 0, 1, 0, 2, NULL, (unsigned long)_RET_IP_);
+ lock_acquire(&lock->dep_map, 0, 1, 0, 1, NULL, (unsigned long)_RET_IP_);
return pthread_rwlock_trywlock(&lock->rwlock) == 0 ? 1 : 0;
}
diff --git a/tools/lib/lockdep/preload.c b/tools/lib/lockdep/preload.c
index 23bd69c..6f80360 100644
--- a/tools/lib/lockdep/preload.c
+++ b/tools/lib/lockdep/preload.c
@@ -92,7 +92,7 @@
static void init_preload(void);
static void try_init_preload(void)
{
- if (!__init_state != done)
+ if (__init_state != done)
init_preload();
}
@@ -252,7 +252,7 @@
try_init_preload();
- lock_acquire(&__get_lock(mutex)->dep_map, 0, 0, 0, 2, NULL,
+ lock_acquire(&__get_lock(mutex)->dep_map, 0, 0, 0, 1, NULL,
(unsigned long)_RET_IP_);
/*
* Here's the thing with pthread mutexes: unlike the kernel variant,
@@ -281,7 +281,7 @@
try_init_preload();
- lock_acquire(&__get_lock(mutex)->dep_map, 0, 1, 0, 2, NULL, (unsigned long)_RET_IP_);
+ lock_acquire(&__get_lock(mutex)->dep_map, 0, 1, 0, 1, NULL, (unsigned long)_RET_IP_);
r = ll_pthread_mutex_trylock(mutex);
if (r)
lock_release(&__get_lock(mutex)->dep_map, 0, (unsigned long)_RET_IP_);
@@ -303,7 +303,7 @@
*/
r = ll_pthread_mutex_unlock(mutex);
if (r)
- lock_acquire(&__get_lock(mutex)->dep_map, 0, 0, 0, 2, NULL, (unsigned long)_RET_IP_);
+ lock_acquire(&__get_lock(mutex)->dep_map, 0, 0, 0, 1, NULL, (unsigned long)_RET_IP_);
return r;
}
@@ -352,7 +352,7 @@
init_preload();
- lock_acquire(&__get_lock(rwlock)->dep_map, 0, 0, 2, 2, NULL, (unsigned long)_RET_IP_);
+ lock_acquire(&__get_lock(rwlock)->dep_map, 0, 0, 2, 1, NULL, (unsigned long)_RET_IP_);
r = ll_pthread_rwlock_rdlock(rwlock);
if (r)
lock_release(&__get_lock(rwlock)->dep_map, 0, (unsigned long)_RET_IP_);
@@ -366,7 +366,7 @@
init_preload();
- lock_acquire(&__get_lock(rwlock)->dep_map, 0, 1, 2, 2, NULL, (unsigned long)_RET_IP_);
+ lock_acquire(&__get_lock(rwlock)->dep_map, 0, 1, 2, 1, NULL, (unsigned long)_RET_IP_);
r = ll_pthread_rwlock_tryrdlock(rwlock);
if (r)
lock_release(&__get_lock(rwlock)->dep_map, 0, (unsigned long)_RET_IP_);
@@ -380,7 +380,7 @@
init_preload();
- lock_acquire(&__get_lock(rwlock)->dep_map, 0, 1, 0, 2, NULL, (unsigned long)_RET_IP_);
+ lock_acquire(&__get_lock(rwlock)->dep_map, 0, 1, 0, 1, NULL, (unsigned long)_RET_IP_);
r = ll_pthread_rwlock_trywrlock(rwlock);
if (r)
lock_release(&__get_lock(rwlock)->dep_map, 0, (unsigned long)_RET_IP_);
@@ -394,7 +394,7 @@
init_preload();
- lock_acquire(&__get_lock(rwlock)->dep_map, 0, 0, 0, 2, NULL, (unsigned long)_RET_IP_);
+ lock_acquire(&__get_lock(rwlock)->dep_map, 0, 0, 0, 1, NULL, (unsigned long)_RET_IP_);
r = ll_pthread_rwlock_wrlock(rwlock);
if (r)
lock_release(&__get_lock(rwlock)->dep_map, 0, (unsigned long)_RET_IP_);
@@ -411,7 +411,7 @@
lock_release(&__get_lock(rwlock)->dep_map, 0, (unsigned long)_RET_IP_);
r = ll_pthread_rwlock_unlock(rwlock);
if (r)
- lock_acquire(&__get_lock(rwlock)->dep_map, 0, 0, 0, 2, NULL, (unsigned long)_RET_IP_);
+ lock_acquire(&__get_lock(rwlock)->dep_map, 0, 0, 0, 1, NULL, (unsigned long)_RET_IP_);
return r;
}
@@ -439,8 +439,6 @@
ll_pthread_rwlock_unlock = dlsym(RTLD_NEXT, "pthread_rwlock_unlock");
#endif
- printf("%p\n", ll_pthread_mutex_trylock);fflush(stdout);
-
lockdep_init();
__init_state = done;
diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c
index 52c03fb..04a229a 100644
--- a/tools/perf/ui/browsers/hists.c
+++ b/tools/perf/ui/browsers/hists.c
@@ -17,6 +17,7 @@
#include "../util.h"
#include "../ui.h"
#include "map.h"
+#include "annotate.h"
struct hist_browser {
struct ui_browser b;
@@ -1593,13 +1594,18 @@
bi->to.sym->name) > 0)
annotate_t = nr_options++;
} else {
-
if (browser->selection != NULL &&
browser->selection->sym != NULL &&
- !browser->selection->map->dso->annotate_warned &&
- asprintf(&options[nr_options], "Annotate %s",
- browser->selection->sym->name) > 0)
- annotate = nr_options++;
+ !browser->selection->map->dso->annotate_warned) {
+ struct annotation *notes;
+
+ notes = symbol__annotation(browser->selection->sym);
+
+ if (notes->src &&
+ asprintf(&options[nr_options], "Annotate %s",
+ browser->selection->sym->name) > 0)
+ annotate = nr_options++;
+ }
}
if (thread != NULL &&
@@ -1656,6 +1662,7 @@
if (choice == annotate || choice == annotate_t || choice == annotate_f) {
struct hist_entry *he;
+ struct annotation *notes;
int err;
do_annotate:
if (!objdump_path && perf_session_env__lookup_objdump(env))
@@ -1679,6 +1686,10 @@
he->ms.map = he->branch_info->to.map;
}
+ notes = symbol__annotation(he->ms.sym);
+ if (!notes->src)
+ continue;
+
/*
* Don't let this be freed, say, by hists__decay_entry.
*/
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index 0e5fea9..c73e1fc 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -496,18 +496,6 @@
u64 start;
};
-static int symbol__in_kernel(void *arg, const char *name,
- char type __maybe_unused, u64 start)
-{
- struct process_args *args = arg;
-
- if (strchr(name, '['))
- return 0;
-
- args->start = start;
- return 1;
-}
-
static void machine__get_kallsyms_filename(struct machine *machine, char *buf,
size_t bufsz)
{
@@ -517,27 +505,41 @@
scnprintf(buf, bufsz, "%s/proc/kallsyms", machine->root_dir);
}
-/* Figure out the start address of kernel map from /proc/kallsyms */
-static u64 machine__get_kernel_start_addr(struct machine *machine)
+const char *ref_reloc_sym_names[] = {"_text", "_stext", NULL};
+
+/* Figure out the start address of kernel map from /proc/kallsyms.
+ * Returns the name of the start symbol in *symbol_name. Pass in NULL as
+ * symbol_name if it's not that important.
+ */
+static u64 machine__get_kernel_start_addr(struct machine *machine,
+ const char **symbol_name)
{
char filename[PATH_MAX];
- struct process_args args;
+ int i;
+ const char *name;
+ u64 addr = 0;
machine__get_kallsyms_filename(machine, filename, PATH_MAX);
if (symbol__restricted_filename(filename, "/proc/kallsyms"))
return 0;
- if (kallsyms__parse(filename, &args, symbol__in_kernel) <= 0)
- return 0;
+ for (i = 0; (name = ref_reloc_sym_names[i]) != NULL; i++) {
+ addr = kallsyms__get_function_start(filename, name);
+ if (addr)
+ break;
+ }
- return args.start;
+ if (symbol_name)
+ *symbol_name = name;
+
+ return addr;
}
int __machine__create_kernel_maps(struct machine *machine, struct dso *kernel)
{
enum map_type type;
- u64 start = machine__get_kernel_start_addr(machine);
+ u64 start = machine__get_kernel_start_addr(machine, NULL);
for (type = 0; type < MAP__NR_TYPES; ++type) {
struct kmap *kmap;
@@ -852,23 +854,11 @@
return 0;
}
-const char *ref_reloc_sym_names[] = {"_text", "_stext", NULL};
-
int machine__create_kernel_maps(struct machine *machine)
{
struct dso *kernel = machine__get_kernel(machine);
- char filename[PATH_MAX];
const char *name;
- u64 addr = 0;
- int i;
-
- machine__get_kallsyms_filename(machine, filename, PATH_MAX);
-
- for (i = 0; (name = ref_reloc_sym_names[i]) != NULL; i++) {
- addr = kallsyms__get_function_start(filename, name);
- if (addr)
- break;
- }
+ u64 addr = machine__get_kernel_start_addr(machine, &name);
if (!addr)
return -1;