drivers/spi/spi-bcm63xx.c - kernel/msm-5.4 - Gitiles

 /*
  * Broadcom BCM63xx SPI controller support
  *
  * Copyright (C) 2009-2012 Florian Fainelli <florian@openwrt.org>
  * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
  * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the
  * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
  */

 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/spi/spi.h>
 #include <linux/completion.h>
 #include <linux/err.h>
 #include <linux/workqueue.h>
 #include <linux/pm_runtime.h>

 #include <bcm63xx_dev_spi.h>

 #define PFX		KBUILD_MODNAME

 #define BCM63XX_SPI_MAX_PREPEND		15

 struct bcm63xx_spi {
 	struct completion	done;

 	void __iomem		*regs;
 	int			irq;

 	/* Platform data */
 	unsigned		fifo_size;
 	unsigned int		msg_type_shift;
 	unsigned int		msg_ctl_width;

 	/* data iomem */
 	u8 __iomem		*tx_io;
 	const u8 __iomem	*rx_io;

 	struct clk		*clk;
 	struct platform_device	*pdev;
 };

 static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs,
 				unsigned int offset)
 {
 	return bcm_readb(bs->regs + bcm63xx_spireg(offset));
 }

 static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs,
 				unsigned int offset)
 {
 	return bcm_readw(bs->regs + bcm63xx_spireg(offset));
 }

 static inline void bcm_spi_writeb(struct bcm63xx_spi *bs,
 				  u8 value, unsigned int offset)
 {
 	bcm_writeb(value, bs->regs + bcm63xx_spireg(offset));
 }

 static inline void bcm_spi_writew(struct bcm63xx_spi *bs,
 				  u16 value, unsigned int offset)
 {
 	bcm_writew(value, bs->regs + bcm63xx_spireg(offset));
 }

 static const unsigned bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = {
 	{ 20000000, SPI_CLK_20MHZ },
 	{ 12500000, SPI_CLK_12_50MHZ },
 	{  6250000, SPI_CLK_6_250MHZ },
 	{  3125000, SPI_CLK_3_125MHZ },
 	{  1563000, SPI_CLK_1_563MHZ },
 	{   781000, SPI_CLK_0_781MHZ },
 	{   391000, SPI_CLK_0_391MHZ }
 };

 static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
 				      struct spi_transfer *t)
 {
 	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
 	u8 clk_cfg, reg;
 	int i;

 	/* Find the closest clock configuration */
 	for (i = 0; i < SPI_CLK_MASK; i++) {
 		if (t->speed_hz >= bcm63xx_spi_freq_table[i][0]) {
 			clk_cfg = bcm63xx_spi_freq_table[i][1];
 			break;
 		}
 	}

 	/* No matching configuration found, default to lowest */
 	if (i == SPI_CLK_MASK)
 		clk_cfg = SPI_CLK_0_391MHZ;

 	/* clear existing clock configuration bits of the register */
 	reg = bcm_spi_readb(bs, SPI_CLK_CFG);
 	reg &= ~SPI_CLK_MASK;
 	reg |= clk_cfg;

 	bcm_spi_writeb(bs, reg, SPI_CLK_CFG);
 	dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n",
 		clk_cfg, t->speed_hz);
 }

 /* the spi->mode bits understood by this driver: */
 #define MODEBITS (SPI_CPOL | SPI_CPHA)

 static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first,
 				unsigned int num_transfers)
 {
 	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
 	u16 msg_ctl;
 	u16 cmd;
 	u8 rx_tail;
 	unsigned int i, timeout = 0, prepend_len = 0, len = 0;
 	struct spi_transfer *t = first;
 	bool do_rx = false;
 	bool do_tx = false;

 	/* Disable the CMD_DONE interrupt */
 	bcm_spi_writeb(bs, 0, SPI_INT_MASK);

 	dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
 		t->tx_buf, t->rx_buf, t->len);

 	if (num_transfers > 1 && t->tx_buf && t->len <= BCM63XX_SPI_MAX_PREPEND)
 		prepend_len = t->len;

 	/* prepare the buffer */
 	for (i = 0; i < num_transfers; i++) {
 		if (t->tx_buf) {
 			do_tx = true;
 			memcpy_toio(bs->tx_io + len, t->tx_buf, t->len);

 			/* don't prepend more than one tx */
 			if (t != first)
 				prepend_len = 0;
 		}

 		if (t->rx_buf) {
 			do_rx = true;
 			/* prepend is half-duplex write only */
 			if (t == first)
 				prepend_len = 0;
 		}

 		len += t->len;

 		t = list_entry(t->transfer_list.next, struct spi_transfer,
 			       transfer_list);
 	}

 	len -= prepend_len;

 	init_completion(&bs->done);

 	/* Fill in the Message control register */
 	msg_ctl = (len << SPI_BYTE_CNT_SHIFT);

 	if (do_rx && do_tx && prepend_len == 0)
 		msg_ctl |= (SPI_FD_RW << bs->msg_type_shift);
 	else if (do_rx)
 		msg_ctl |= (SPI_HD_R << bs->msg_type_shift);
 	else if (do_tx)
 		msg_ctl |= (SPI_HD_W << bs->msg_type_shift);

 	switch (bs->msg_ctl_width) {
 	case 8:
 		bcm_spi_writeb(bs, msg_ctl, SPI_MSG_CTL);
 		break;
 	case 16:
 		bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
 		break;
 	}

 	/* Issue the transfer */
 	cmd = SPI_CMD_START_IMMEDIATE;
 	cmd |= (prepend_len << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
 	cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
 	bcm_spi_writew(bs, cmd, SPI_CMD);

 	/* Enable the CMD_DONE interrupt */
 	bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);

 	timeout = wait_for_completion_timeout(&bs->done, HZ);
 	if (!timeout)
 		return -ETIMEDOUT;

 	/* read out all data */
 	rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);

 	if (do_rx && rx_tail != len)
 		return -EIO;

 	if (!rx_tail)
 		return 0;

 	len = 0;
 	t = first;
 	/* Read out all the data */
 	for (i = 0; i < num_transfers; i++) {
 		if (t->rx_buf)
 			memcpy_fromio(t->rx_buf, bs->rx_io + len, t->len);

 		if (t != first || prepend_len == 0)
 			len += t->len;

 		t = list_entry(t->transfer_list.next, struct spi_transfer,
 			       transfer_list);
 	}

 	return 0;
 }

 static int bcm63xx_spi_transfer_one(struct spi_master *master,
 					struct spi_message *m)
 {
 	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
 	struct spi_transfer *t, *first = NULL;
 	struct spi_device *spi = m->spi;
 	int status = 0;
 	unsigned int n_transfers = 0, total_len = 0;
 	bool can_use_prepend = false;

 	/*
 	 * This SPI controller does not support keeping CS active after a
 	 * transfer.
 	 * Work around this by merging as many transfers we can into one big
 	 * full-duplex transfers.
 	 */
 	list_for_each_entry(t, &m->transfers, transfer_list) {
 		if (!first)
 			first = t;

 		n_transfers++;
 		total_len += t->len;

 		if (n_transfers == 2 && !first->rx_buf && !t->tx_buf &&
 		    first->len <= BCM63XX_SPI_MAX_PREPEND)
 			can_use_prepend = true;
 		else if (can_use_prepend && t->tx_buf)
 			can_use_prepend = false;

 		/* we can only transfer one fifo worth of data */
 		if ((can_use_prepend &&
 		     total_len > (bs->fifo_size + BCM63XX_SPI_MAX_PREPEND)) ||
 		    (!can_use_prepend && total_len > bs->fifo_size)) {
 			dev_err(&spi->dev, "unable to do transfers larger than FIFO size (%i > %i)\n",
 				total_len, bs->fifo_size);
 			status = -EINVAL;
 			goto exit;
 		}

 		/* all combined transfers have to have the same speed */
 		if (t->speed_hz != first->speed_hz) {
 			dev_err(&spi->dev, "unable to change speed between transfers\n");
 			status = -EINVAL;
 			goto exit;
 		}

 		/* CS will be deasserted directly after transfer */
 		if (t->delay_usecs) {
 			dev_err(&spi->dev, "unable to keep CS asserted after transfer\n");
 			status = -EINVAL;
 			goto exit;
 		}

 		if (t->cs_change ||
 		    list_is_last(&t->transfer_list, &m->transfers)) {
 			/* configure adapter for a new transfer */
 			bcm63xx_spi_setup_transfer(spi, first);

 			/* send the data */
 			status = bcm63xx_txrx_bufs(spi, first, n_transfers);
 			if (status)
 				goto exit;

 			m->actual_length += total_len;

 			first = NULL;
 			n_transfers = 0;
 			total_len = 0;
 			can_use_prepend = false;
 		}
 	}
 exit:
 	m->status = status;
 	spi_finalize_current_message(master);

 	return 0;
 }

 /* This driver supports single master mode only. Hence
  * CMD_DONE is the only interrupt we care about
  */
 static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
 {
 	struct spi_master *master = (struct spi_master *)dev_id;
 	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
 	u8 intr;

 	/* Read interupts and clear them immediately */
 	intr = bcm_spi_readb(bs, SPI_INT_STATUS);
 	bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
 	bcm_spi_writeb(bs, 0, SPI_INT_MASK);

 	/* A transfer completed */
 	if (intr & SPI_INTR_CMD_DONE)
 		complete(&bs->done);

 	return IRQ_HANDLED;
 }


 static int bcm63xx_spi_probe(struct platform_device *pdev)
 {
 	struct resource *r;
 	struct device *dev = &pdev->dev;
 	struct bcm63xx_spi_pdata *pdata = dev_get_platdata(&pdev->dev);
 	int irq;
 	struct spi_master *master;
 	struct clk *clk;
 	struct bcm63xx_spi *bs;
 	int ret;

 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(dev, "no irq\n");
 		ret = -ENXIO;
 		goto out;
 	}

 	clk = clk_get(dev, "spi");
 	if (IS_ERR(clk)) {
 		dev_err(dev, "no clock for device\n");
 		ret = PTR_ERR(clk);
 		goto out;
 	}

 	master = spi_alloc_master(dev, sizeof(*bs));
 	if (!master) {
 		dev_err(dev, "out of memory\n");
 		ret = -ENOMEM;
 		goto out_clk;
 	}

 	bs = spi_master_get_devdata(master);

 	platform_set_drvdata(pdev, master);
 	bs->pdev = pdev;

 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	bs->regs = devm_ioremap_resource(&pdev->dev, r);
 	if (IS_ERR(bs->regs)) {
 		ret = PTR_ERR(bs->regs);
 		goto out_err;
 	}

 	bs->irq = irq;
 	bs->clk = clk;
 	bs->fifo_size = pdata->fifo_size;

 	ret = devm_request_irq(&pdev->dev, irq, bcm63xx_spi_interrupt, 0,
 							pdev->name, master);
 	if (ret) {
 		dev_err(dev, "unable to request irq\n");
 		goto out_err;
 	}

 	master->bus_num = pdata->bus_num;
 	master->num_chipselect = pdata->num_chipselect;
 	master->transfer_one_message = bcm63xx_spi_transfer_one;
 	master->mode_bits = MODEBITS;
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
 	master->auto_runtime_pm = true;
 	bs->msg_type_shift = pdata->msg_type_shift;
 	bs->msg_ctl_width = pdata->msg_ctl_width;
 	bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
 	bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));

 	switch (bs->msg_ctl_width) {
 	case 8:
 	case 16:
 		break;
 	default:
 		dev_err(dev, "unsupported MSG_CTL width: %d\n",
 			 bs->msg_ctl_width);
 		goto out_err;
 	}

 	/* Initialize hardware */
 	clk_prepare_enable(bs->clk);
 	bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);

 	/* register and we are done */
 	ret = devm_spi_register_master(dev, master);
 	if (ret) {
 		dev_err(dev, "spi register failed\n");
 		goto out_clk_disable;
 	}

 	dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d)\n",
 		 r->start, irq, bs->fifo_size);

 	return 0;

 out_clk_disable:
 	clk_disable_unprepare(clk);
 out_err:
 	spi_master_put(master);
 out_clk:
 	clk_put(clk);
 out:
 	return ret;
 }

 static int bcm63xx_spi_remove(struct platform_device *pdev)
 {
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct bcm63xx_spi *bs = spi_master_get_devdata(master);

 	/* reset spi block */
 	bcm_spi_writeb(bs, 0, SPI_INT_MASK);

 	/* HW shutdown */
 	clk_disable_unprepare(bs->clk);
 	clk_put(bs->clk);

 	return 0;
 }

 #ifdef CONFIG_PM
 static int bcm63xx_spi_suspend(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct bcm63xx_spi *bs = spi_master_get_devdata(master);

 	spi_master_suspend(master);

 	clk_disable_unprepare(bs->clk);

 	return 0;
 }

 static int bcm63xx_spi_resume(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct bcm63xx_spi *bs = spi_master_get_devdata(master);

 	clk_prepare_enable(bs->clk);

 	spi_master_resume(master);

 	return 0;
 }

 static const struct dev_pm_ops bcm63xx_spi_pm_ops = {
 	.suspend	= bcm63xx_spi_suspend,
 	.resume		= bcm63xx_spi_resume,
 };

 #define BCM63XX_SPI_PM_OPS	(&bcm63xx_spi_pm_ops)
 #else
 #define BCM63XX_SPI_PM_OPS	NULL
 #endif

 static struct platform_driver bcm63xx_spi_driver = {
 	.driver = {
 		.name	= "bcm63xx-spi",
 		.owner	= THIS_MODULE,
 		.pm	= BCM63XX_SPI_PM_OPS,
 	},
 	.probe		= bcm63xx_spi_probe,
 	.remove		= bcm63xx_spi_remove,
 };

 module_platform_driver(bcm63xx_spi_driver);

 MODULE_ALIAS("platform:bcm63xx_spi");
 MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
 MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>");
 MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver");
 MODULE_LICENSE("GPL");
	/*
	* Broadcom BCM63xx SPI controller support
	*
	* Copyright (C) 2009-2012 Florian Fainelli <florian@openwrt.org>
	* Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version 2
	* of the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the
	* Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
	*/

	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/clk.h>
	#include <linux/io.h>
	#include <linux/module.h>
	#include <linux/platform_device.h>
	#include <linux/delay.h>
	#include <linux/interrupt.h>
	#include <linux/spi/spi.h>
	#include <linux/completion.h>
	#include <linux/err.h>
	#include <linux/workqueue.h>
	#include <linux/pm_runtime.h>

	#include <bcm63xx_dev_spi.h>

	#define PFX KBUILD_MODNAME

	#define BCM63XX_SPI_MAX_PREPEND 15

	struct bcm63xx_spi {
	struct completion done;

	void __iomem *regs;
	int irq;

	/* Platform data */
	unsigned fifo_size;
	unsigned int msg_type_shift;
	unsigned int msg_ctl_width;

	/* data iomem */
	u8 __iomem *tx_io;
	const u8 __iomem *rx_io;

	struct clk *clk;
	struct platform_device *pdev;
	};

	static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs,
	unsigned int offset)
	{
	return bcm_readb(bs->regs + bcm63xx_spireg(offset));
	}

	static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs,
	unsigned int offset)
	{
	return bcm_readw(bs->regs + bcm63xx_spireg(offset));
	}

	static inline void bcm_spi_writeb(struct bcm63xx_spi *bs,
	u8 value, unsigned int offset)
	{
	bcm_writeb(value, bs->regs + bcm63xx_spireg(offset));
	}

	static inline void bcm_spi_writew(struct bcm63xx_spi *bs,
	u16 value, unsigned int offset)
	{
	bcm_writew(value, bs->regs + bcm63xx_spireg(offset));
	}

	static const unsigned bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = {
	{ 20000000, SPI_CLK_20MHZ },
	{ 12500000, SPI_CLK_12_50MHZ },
	{ 6250000, SPI_CLK_6_250MHZ },
	{ 3125000, SPI_CLK_3_125MHZ },
	{ 1563000, SPI_CLK_1_563MHZ },
	{ 781000, SPI_CLK_0_781MHZ },
	{ 391000, SPI_CLK_0_391MHZ }
	};

	static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
	struct spi_transfer *t)
	{
	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
	u8 clk_cfg, reg;
	int i;

	/* Find the closest clock configuration */
	for (i = 0; i < SPI_CLK_MASK; i++) {
	if (t->speed_hz >= bcm63xx_spi_freq_table[i][0]) {
	clk_cfg = bcm63xx_spi_freq_table[i][1];
	break;
	}
	}

	/* No matching configuration found, default to lowest */
	if (i == SPI_CLK_MASK)
	clk_cfg = SPI_CLK_0_391MHZ;

	/* clear existing clock configuration bits of the register */
	reg = bcm_spi_readb(bs, SPI_CLK_CFG);
	reg &= ~SPI_CLK_MASK;
	reg \|= clk_cfg;

	bcm_spi_writeb(bs, reg, SPI_CLK_CFG);
	dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n",
	clk_cfg, t->speed_hz);
	}

	/* the spi->mode bits understood by this driver: */
	#define MODEBITS (SPI_CPOL \| SPI_CPHA)

	static int bcm63xx_txrx_bufs(struct spi_device spi, struct spi_transfer first,
	unsigned int num_transfers)
	{
	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
	u16 msg_ctl;
	u16 cmd;
	u8 rx_tail;
	unsigned int i, timeout = 0, prepend_len = 0, len = 0;
	struct spi_transfer *t = first;
	bool do_rx = false;
	bool do_tx = false;

	/* Disable the CMD_DONE interrupt */
	bcm_spi_writeb(bs, 0, SPI_INT_MASK);

	dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
	t->tx_buf, t->rx_buf, t->len);

	if (num_transfers > 1 && t->tx_buf && t->len <= BCM63XX_SPI_MAX_PREPEND)
	prepend_len = t->len;

	/* prepare the buffer */
	for (i = 0; i < num_transfers; i++) {
	if (t->tx_buf) {
	do_tx = true;
	memcpy_toio(bs->tx_io + len, t->tx_buf, t->len);

	/* don't prepend more than one tx */
	if (t != first)
	prepend_len = 0;
	}

	if (t->rx_buf) {
	do_rx = true;
	/* prepend is half-duplex write only */
	if (t == first)
	prepend_len = 0;
	}

	len += t->len;

	t = list_entry(t->transfer_list.next, struct spi_transfer,
	transfer_list);
	}

	len -= prepend_len;

	init_completion(&bs->done);

	/* Fill in the Message control register */
	msg_ctl = (len << SPI_BYTE_CNT_SHIFT);

	if (do_rx && do_tx && prepend_len == 0)
	msg_ctl \|= (SPI_FD_RW << bs->msg_type_shift);
	else if (do_rx)
	msg_ctl \|= (SPI_HD_R << bs->msg_type_shift);
	else if (do_tx)
	msg_ctl \|= (SPI_HD_W << bs->msg_type_shift);

	switch (bs->msg_ctl_width) {
	case 8:
	bcm_spi_writeb(bs, msg_ctl, SPI_MSG_CTL);
	break;
	case 16:
	bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
	break;
	}

	/* Issue the transfer */
	cmd = SPI_CMD_START_IMMEDIATE;
	cmd \|= (prepend_len << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
	cmd \|= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
	bcm_spi_writew(bs, cmd, SPI_CMD);

	/* Enable the CMD_DONE interrupt */
	bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);

	timeout = wait_for_completion_timeout(&bs->done, HZ);
	if (!timeout)
	return -ETIMEDOUT;

	/* read out all data */
	rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);

	if (do_rx && rx_tail != len)
	return -EIO;

	if (!rx_tail)
	return 0;

	len = 0;
	t = first;
	/* Read out all the data */
	for (i = 0; i < num_transfers; i++) {
	if (t->rx_buf)
	memcpy_fromio(t->rx_buf, bs->rx_io + len, t->len);

	if (t != first \|\| prepend_len == 0)
	len += t->len;

	t = list_entry(t->transfer_list.next, struct spi_transfer,
	transfer_list);
	}

	return 0;
	}

	static int bcm63xx_spi_transfer_one(struct spi_master *master,
	struct spi_message *m)
	{
	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
	struct spi_transfer t, first = NULL;
	struct spi_device *spi = m->spi;
	int status = 0;
	unsigned int n_transfers = 0, total_len = 0;
	bool can_use_prepend = false;

	/*
	* This SPI controller does not support keeping CS active after a
	* transfer.
	* Work around this by merging as many transfers we can into one big
	* full-duplex transfers.
	*/
	list_for_each_entry(t, &m->transfers, transfer_list) {
	if (!first)
	first = t;

	n_transfers++;
	total_len += t->len;

	if (n_transfers == 2 && !first->rx_buf && !t->tx_buf &&
	first->len <= BCM63XX_SPI_MAX_PREPEND)
	can_use_prepend = true;
	else if (can_use_prepend && t->tx_buf)
	can_use_prepend = false;

	/* we can only transfer one fifo worth of data */
	if ((can_use_prepend &&
	total_len > (bs->fifo_size + BCM63XX_SPI_MAX_PREPEND)) \|\|
	(!can_use_prepend && total_len > bs->fifo_size)) {
	dev_err(&spi->dev, "unable to do transfers larger than FIFO size (%i > %i)\n",
	total_len, bs->fifo_size);
	status = -EINVAL;
	goto exit;
	}

	/* all combined transfers have to have the same speed */
	if (t->speed_hz != first->speed_hz) {
	dev_err(&spi->dev, "unable to change speed between transfers\n");
	status = -EINVAL;
	goto exit;
	}

	/* CS will be deasserted directly after transfer */
	if (t->delay_usecs) {
	dev_err(&spi->dev, "unable to keep CS asserted after transfer\n");
	status = -EINVAL;
	goto exit;
	}

	if (t->cs_change \|\|
	list_is_last(&t->transfer_list, &m->transfers)) {
	/* configure adapter for a new transfer */
	bcm63xx_spi_setup_transfer(spi, first);

	/* send the data */
	status = bcm63xx_txrx_bufs(spi, first, n_transfers);
	if (status)
	goto exit;

	m->actual_length += total_len;

	first = NULL;
	n_transfers = 0;
	total_len = 0;
	can_use_prepend = false;
	}
	}
	exit:
	m->status = status;
	spi_finalize_current_message(master);

	return 0;
	}

	/* This driver supports single master mode only. Hence
	* CMD_DONE is the only interrupt we care about
	*/
	static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
	{
	struct spi_master master = (struct spi_master )dev_id;
	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
	u8 intr;

	/* Read interupts and clear them immediately */
	intr = bcm_spi_readb(bs, SPI_INT_STATUS);
	bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
	bcm_spi_writeb(bs, 0, SPI_INT_MASK);

	/* A transfer completed */
	if (intr & SPI_INTR_CMD_DONE)
	complete(&bs->done);

	return IRQ_HANDLED;
	}


	static int bcm63xx_spi_probe(struct platform_device *pdev)
	{
	struct resource *r;
	struct device *dev = &pdev->dev;
	struct bcm63xx_spi_pdata *pdata = dev_get_platdata(&pdev->dev);
	int irq;
	struct spi_master *master;
	struct clk *clk;
	struct bcm63xx_spi *bs;
	int ret;

	irq = platform_get_irq(pdev, 0);
	if (irq < 0) {
	dev_err(dev, "no irq\n");
	ret = -ENXIO;
	goto out;
	}

	clk = clk_get(dev, "spi");
	if (IS_ERR(clk)) {
	dev_err(dev, "no clock for device\n");
	ret = PTR_ERR(clk);
	goto out;
	}

	master = spi_alloc_master(dev, sizeof(*bs));
	if (!master) {
	dev_err(dev, "out of memory\n");
	ret = -ENOMEM;
	goto out_clk;
	}

	bs = spi_master_get_devdata(master);

	platform_set_drvdata(pdev, master);
	bs->pdev = pdev;

	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	bs->regs = devm_ioremap_resource(&pdev->dev, r);
	if (IS_ERR(bs->regs)) {
	ret = PTR_ERR(bs->regs);
	goto out_err;
	}

	bs->irq = irq;
	bs->clk = clk;
	bs->fifo_size = pdata->fifo_size;

	ret = devm_request_irq(&pdev->dev, irq, bcm63xx_spi_interrupt, 0,
	pdev->name, master);
	if (ret) {
	dev_err(dev, "unable to request irq\n");
	goto out_err;
	}

	master->bus_num = pdata->bus_num;
	master->num_chipselect = pdata->num_chipselect;
	master->transfer_one_message = bcm63xx_spi_transfer_one;
	master->mode_bits = MODEBITS;
	master->bits_per_word_mask = SPI_BPW_MASK(8);
	master->auto_runtime_pm = true;
	bs->msg_type_shift = pdata->msg_type_shift;
	bs->msg_ctl_width = pdata->msg_ctl_width;
	bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
	bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));

	switch (bs->msg_ctl_width) {
	case 8:
	case 16:
	break;
	default:
	dev_err(dev, "unsupported MSG_CTL width: %d\n",
	bs->msg_ctl_width);
	goto out_err;
	}

	/* Initialize hardware */
	clk_prepare_enable(bs->clk);
	bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);

	/* register and we are done */
	ret = devm_spi_register_master(dev, master);
	if (ret) {
	dev_err(dev, "spi register failed\n");
	goto out_clk_disable;
	}

	dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d)\n",
	r->start, irq, bs->fifo_size);

	return 0;

	out_clk_disable:
	clk_disable_unprepare(clk);
	out_err:
	spi_master_put(master);
	out_clk:
	clk_put(clk);
	out:
	return ret;
	}

	static int bcm63xx_spi_remove(struct platform_device *pdev)
	{
	struct spi_master *master = platform_get_drvdata(pdev);
	struct bcm63xx_spi *bs = spi_master_get_devdata(master);

	/* reset spi block */
	bcm_spi_writeb(bs, 0, SPI_INT_MASK);

	/* HW shutdown */
	clk_disable_unprepare(bs->clk);
	clk_put(bs->clk);

	return 0;
	}

	#ifdef CONFIG_PM
	static int bcm63xx_spi_suspend(struct device *dev)
	{
	struct spi_master *master = dev_get_drvdata(dev);
	struct bcm63xx_spi *bs = spi_master_get_devdata(master);

	spi_master_suspend(master);

	clk_disable_unprepare(bs->clk);

	return 0;
	}

	static int bcm63xx_spi_resume(struct device *dev)
	{
	struct spi_master *master = dev_get_drvdata(dev);
	struct bcm63xx_spi *bs = spi_master_get_devdata(master);

	clk_prepare_enable(bs->clk);

	spi_master_resume(master);

	return 0;
	}

	static const struct dev_pm_ops bcm63xx_spi_pm_ops = {
	.suspend = bcm63xx_spi_suspend,
	.resume = bcm63xx_spi_resume,
	};

	#define BCM63XX_SPI_PM_OPS (&bcm63xx_spi_pm_ops)
	#else
	#define BCM63XX_SPI_PM_OPS NULL
	#endif

	static struct platform_driver bcm63xx_spi_driver = {
	.driver = {
	.name = "bcm63xx-spi",
	.owner = THIS_MODULE,
	.pm = BCM63XX_SPI_PM_OPS,
	},
	.probe = bcm63xx_spi_probe,
	.remove = bcm63xx_spi_remove,
	};

	module_platform_driver(bcm63xx_spi_driver);

	MODULE_ALIAS("platform:bcm63xx_spi");
	MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
	MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>");
	MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver");
	MODULE_LICENSE("GPL");