rt2x00: Unify GPIO register field namings
The various rt2x00 drivers use different methods to name the different
GPIO register fields indicating the GPIO pin value and the fields
indicating the direction.
Start using a unified naming scheme for the GPIO register fields:
- <csr>_VAL<x> for fields indicating the GPIO pin value.
- <csr>_DIR<x> for fields indicating the GPIO pin direction.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo Van Doorn <ivdoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 64328af..6458ab8 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -205,7 +205,7 @@
u32 reg;
rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®);
- return rt2x00_get_field32(reg, GPIOCSR_BIT0);
+ return rt2x00_get_field32(reg, GPIOCSR_VAL0);
}
#ifdef CONFIG_RT2X00_LIB_LEDS
@@ -1629,7 +1629,7 @@
* rfkill switch GPIO pin correctly.
*/
rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®);
- rt2x00_set_field32(®, GPIOCSR_BIT8, 1);
+ rt2x00_set_field32(®, GPIOCSR_DIR0, 1);
rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg);
/*
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index 9d78a53..e4b07f0 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -660,24 +660,26 @@
/*
* GPIOCSR: GPIO control register.
+ * GPIOCSR_VALx: Actual GPIO pin x value
+ * GPIOCSR_DIRx: GPIO direction: 0 = output; 1 = input
*/
#define GPIOCSR 0x0120
-#define GPIOCSR_BIT0 FIELD32(0x00000001)
-#define GPIOCSR_BIT1 FIELD32(0x00000002)
-#define GPIOCSR_BIT2 FIELD32(0x00000004)
-#define GPIOCSR_BIT3 FIELD32(0x00000008)
-#define GPIOCSR_BIT4 FIELD32(0x00000010)
-#define GPIOCSR_BIT5 FIELD32(0x00000020)
-#define GPIOCSR_BIT6 FIELD32(0x00000040)
-#define GPIOCSR_BIT7 FIELD32(0x00000080)
-#define GPIOCSR_BIT8 FIELD32(0x00000100)
-#define GPIOCSR_BIT9 FIELD32(0x00000200)
-#define GPIOCSR_BIT10 FIELD32(0x00000400)
-#define GPIOCSR_BIT11 FIELD32(0x00000800)
-#define GPIOCSR_BIT12 FIELD32(0x00001000)
-#define GPIOCSR_BIT13 FIELD32(0x00002000)
-#define GPIOCSR_BIT14 FIELD32(0x00004000)
-#define GPIOCSR_BIT15 FIELD32(0x00008000)
+#define GPIOCSR_VAL0 FIELD32(0x00000001)
+#define GPIOCSR_VAL1 FIELD32(0x00000002)
+#define GPIOCSR_VAL2 FIELD32(0x00000004)
+#define GPIOCSR_VAL3 FIELD32(0x00000008)
+#define GPIOCSR_VAL4 FIELD32(0x00000010)
+#define GPIOCSR_VAL5 FIELD32(0x00000020)
+#define GPIOCSR_VAL6 FIELD32(0x00000040)
+#define GPIOCSR_VAL7 FIELD32(0x00000080)
+#define GPIOCSR_DIR0 FIELD32(0x00000100)
+#define GPIOCSR_DIR1 FIELD32(0x00000200)
+#define GPIOCSR_DIR2 FIELD32(0x00000400)
+#define GPIOCSR_DIR3 FIELD32(0x00000800)
+#define GPIOCSR_DIR4 FIELD32(0x00001000)
+#define GPIOCSR_DIR5 FIELD32(0x00002000)
+#define GPIOCSR_DIR6 FIELD32(0x00004000)
+#define GPIOCSR_DIR7 FIELD32(0x00008000)
/*
* BBPPCSR: BBP Pin control register.
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 3de0406..68bca14 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -205,7 +205,7 @@
u32 reg;
rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®);
- return rt2x00_get_field32(reg, GPIOCSR_BIT0);
+ return rt2x00_get_field32(reg, GPIOCSR_VAL0);
}
#ifdef CONFIG_RT2X00_LIB_LEDS
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h
index 2aad7ba..9c10068 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.h
+++ b/drivers/net/wireless/rt2x00/rt2500pci.h
@@ -789,16 +789,18 @@
/*
* GPIOCSR: GPIO control register.
+ * GPIOCSR_VALx: GPIO value
+ * GPIOCSR_DIRx: GPIO direction: 0 = output; 1 = input
*/
#define GPIOCSR 0x0120
-#define GPIOCSR_BIT0 FIELD32(0x00000001)
-#define GPIOCSR_BIT1 FIELD32(0x00000002)
-#define GPIOCSR_BIT2 FIELD32(0x00000004)
-#define GPIOCSR_BIT3 FIELD32(0x00000008)
-#define GPIOCSR_BIT4 FIELD32(0x00000010)
-#define GPIOCSR_BIT5 FIELD32(0x00000020)
-#define GPIOCSR_BIT6 FIELD32(0x00000040)
-#define GPIOCSR_BIT7 FIELD32(0x00000080)
+#define GPIOCSR_VAL0 FIELD32(0x00000001)
+#define GPIOCSR_VAL1 FIELD32(0x00000002)
+#define GPIOCSR_VAL2 FIELD32(0x00000004)
+#define GPIOCSR_VAL3 FIELD32(0x00000008)
+#define GPIOCSR_VAL4 FIELD32(0x00000010)
+#define GPIOCSR_VAL5 FIELD32(0x00000020)
+#define GPIOCSR_VAL6 FIELD32(0x00000040)
+#define GPIOCSR_VAL7 FIELD32(0x00000080)
#define GPIOCSR_DIR0 FIELD32(0x00000100)
#define GPIOCSR_DIR1 FIELD32(0x00000200)
#define GPIOCSR_DIR2 FIELD32(0x00000400)
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 89fee31..f95b551 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -283,7 +283,7 @@
u16 reg;
rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®);
- return rt2x00_get_field16(reg, MAC_CSR19_BIT7);
+ return rt2x00_get_field16(reg, MAC_CSR19_VAL7);
}
#ifdef CONFIG_RT2X00_LIB_LEDS
@@ -1786,7 +1786,7 @@
* rfkill switch GPIO pin correctly.
*/
rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®);
- rt2x00_set_field16(®, MAC_CSR19_BIT8, 0);
+ rt2x00_set_field16(®, MAC_CSR19_DIR0, 0);
rt2500usb_register_write(rt2x00dev, MAC_CSR19, reg);
/*
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index 9652300..1b91a4c 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -187,24 +187,26 @@
/*
* MAC_CSR19: GPIO control register.
+ * MAC_CSR19_VALx: GPIO value
+ * MAC_CSR19_DIRx: GPIO direction: 0 = input; 1 = output
*/
#define MAC_CSR19 0x0426
-#define MAC_CSR19_BIT0 FIELD16(0x0001)
-#define MAC_CSR19_BIT1 FIELD16(0x0002)
-#define MAC_CSR19_BIT2 FIELD16(0x0004)
-#define MAC_CSR19_BIT3 FIELD16(0x0008)
-#define MAC_CSR19_BIT4 FIELD16(0x0010)
-#define MAC_CSR19_BIT5 FIELD16(0x0020)
-#define MAC_CSR19_BIT6 FIELD16(0x0040)
-#define MAC_CSR19_BIT7 FIELD16(0x0080)
-#define MAC_CSR19_BIT8 FIELD16(0x0100)
-#define MAC_CSR19_BIT9 FIELD16(0x0200)
-#define MAC_CSR19_BIT10 FIELD16(0x0400)
-#define MAC_CSR19_BIT11 FIELD16(0x0800)
-#define MAC_CSR19_BIT12 FIELD16(0x1000)
-#define MAC_CSR19_BIT13 FIELD16(0x2000)
-#define MAC_CSR19_BIT14 FIELD16(0x4000)
-#define MAC_CSR19_BIT15 FIELD16(0x8000)
+#define MAC_CSR19_VAL0 FIELD16(0x0001)
+#define MAC_CSR19_VAL1 FIELD16(0x0002)
+#define MAC_CSR19_VAL2 FIELD16(0x0004)
+#define MAC_CSR19_VAL3 FIELD16(0x0008)
+#define MAC_CSR19_VAL4 FIELD16(0x0010)
+#define MAC_CSR19_VAL5 FIELD16(0x0020)
+#define MAC_CSR19_VAL6 FIELD16(0x0040)
+#define MAC_CSR19_VAL7 FIELD16(0x0080)
+#define MAC_CSR19_DIR0 FIELD16(0x0100)
+#define MAC_CSR19_DIR1 FIELD16(0x0200)
+#define MAC_CSR19_DIR2 FIELD16(0x0400)
+#define MAC_CSR19_DIR3 FIELD16(0x0800)
+#define MAC_CSR19_DIR4 FIELD16(0x1000)
+#define MAC_CSR19_DIR5 FIELD16(0x2000)
+#define MAC_CSR19_DIR6 FIELD16(0x4000)
+#define MAC_CSR19_DIR7 FIELD16(0x8000)
/*
* MAC_CSR20: LED control register.
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index a838e17..e13916f 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -439,32 +439,33 @@
#define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000)
/*
- * GPIO_CTRL_CFG:
- * GPIOD: GPIO direction, 0: Output, 1: Input
+ * GPIO_CTRL:
+ * GPIO_CTRL_VALx: GPIO value
+ * GPIO_CTRL_DIRx: GPIO direction: 0 = output; 1 = input
*/
-#define GPIO_CTRL_CFG 0x0228
-#define GPIO_CTRL_CFG_BIT0 FIELD32(0x00000001)
-#define GPIO_CTRL_CFG_BIT1 FIELD32(0x00000002)
-#define GPIO_CTRL_CFG_BIT2 FIELD32(0x00000004)
-#define GPIO_CTRL_CFG_BIT3 FIELD32(0x00000008)
-#define GPIO_CTRL_CFG_BIT4 FIELD32(0x00000010)
-#define GPIO_CTRL_CFG_BIT5 FIELD32(0x00000020)
-#define GPIO_CTRL_CFG_BIT6 FIELD32(0x00000040)
-#define GPIO_CTRL_CFG_BIT7 FIELD32(0x00000080)
-#define GPIO_CTRL_CFG_GPIOD_BIT0 FIELD32(0x00000100)
-#define GPIO_CTRL_CFG_GPIOD_BIT1 FIELD32(0x00000200)
-#define GPIO_CTRL_CFG_GPIOD_BIT2 FIELD32(0x00000400)
-#define GPIO_CTRL_CFG_GPIOD_BIT3 FIELD32(0x00000800)
-#define GPIO_CTRL_CFG_GPIOD_BIT4 FIELD32(0x00001000)
-#define GPIO_CTRL_CFG_GPIOD_BIT5 FIELD32(0x00002000)
-#define GPIO_CTRL_CFG_GPIOD_BIT6 FIELD32(0x00004000)
-#define GPIO_CTRL_CFG_GPIOD_BIT7 FIELD32(0x00008000)
-#define GPIO_CTRL_CFG_BIT8 FIELD32(0x00010000)
-#define GPIO_CTRL_CFG_BIT9 FIELD32(0x00020000)
-#define GPIO_CTRL_CFG_BIT10 FIELD32(0x00040000)
-#define GPIO_CTRL_CFG_GPIOD_BIT8 FIELD32(0x01000000)
-#define GPIO_CTRL_CFG_GPIOD_BIT9 FIELD32(0x02000000)
-#define GPIO_CTRL_CFG_GPIOD_BIT10 FIELD32(0x04000000)
+#define GPIO_CTRL 0x0228
+#define GPIO_CTRL_VAL0 FIELD32(0x00000001)
+#define GPIO_CTRL_VAL1 FIELD32(0x00000002)
+#define GPIO_CTRL_VAL2 FIELD32(0x00000004)
+#define GPIO_CTRL_VAL3 FIELD32(0x00000008)
+#define GPIO_CTRL_VAL4 FIELD32(0x00000010)
+#define GPIO_CTRL_VAL5 FIELD32(0x00000020)
+#define GPIO_CTRL_VAL6 FIELD32(0x00000040)
+#define GPIO_CTRL_VAL7 FIELD32(0x00000080)
+#define GPIO_CTRL_DIR0 FIELD32(0x00000100)
+#define GPIO_CTRL_DIR1 FIELD32(0x00000200)
+#define GPIO_CTRL_DIR2 FIELD32(0x00000400)
+#define GPIO_CTRL_DIR3 FIELD32(0x00000800)
+#define GPIO_CTRL_DIR4 FIELD32(0x00001000)
+#define GPIO_CTRL_DIR5 FIELD32(0x00002000)
+#define GPIO_CTRL_DIR6 FIELD32(0x00004000)
+#define GPIO_CTRL_DIR7 FIELD32(0x00008000)
+#define GPIO_CTRL_VAL8 FIELD32(0x00010000)
+#define GPIO_CTRL_VAL9 FIELD32(0x00020000)
+#define GPIO_CTRL_VAL10 FIELD32(0x00040000)
+#define GPIO_CTRL_DIR8 FIELD32(0x01000000)
+#define GPIO_CTRL_DIR9 FIELD32(0x02000000)
+#define GPIO_CTRL_DIR10 FIELD32(0x04000000)
/*
* MCU_CMD_CFG
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index b93516d..58fc1d9 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -923,8 +923,8 @@
rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®);
return rt2x00_get_field32(reg, WLAN_GPIO_IN_BIT0);
} else {
- rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
- return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
+ rt2800_register_read(rt2x00dev, GPIO_CTRL, ®);
+ return rt2x00_get_field32(reg, GPIO_CTRL_VAL2);
}
}
EXPORT_SYMBOL_GPL(rt2800_rfkill_poll);
@@ -1570,10 +1570,10 @@
rt2800_mcu_request(rt2x00dev, MCU_ANT_SELECT, 0xff,
eesk_pin, 0);
- rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
- rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT3, 0);
- rt2x00_set_field32(®, GPIO_CTRL_CFG_BIT3, gpio_bit3);
- rt2800_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+ rt2800_register_read(rt2x00dev, GPIO_CTRL, ®);
+ rt2x00_set_field32(®, GPIO_CTRL_DIR3, 0);
+ rt2x00_set_field32(®, GPIO_CTRL_VAL3, gpio_bit3);
+ rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
}
void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant)
@@ -1995,13 +1995,13 @@
rt2800_rfcsr_write(rt2x00dev, 29, 0x9f);
}
- rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
- rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT7, 0);
+ rt2800_register_read(rt2x00dev, GPIO_CTRL, ®);
+ rt2x00_set_field32(®, GPIO_CTRL_DIR7, 0);
if (rf->channel <= 14)
- rt2x00_set_field32(®, GPIO_CTRL_CFG_BIT7, 1);
+ rt2x00_set_field32(®, GPIO_CTRL_VAL7, 1);
else
- rt2x00_set_field32(®, GPIO_CTRL_CFG_BIT7, 0);
- rt2800_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+ rt2x00_set_field32(®, GPIO_CTRL_VAL7, 0);
+ rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
@@ -3587,16 +3587,16 @@
if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
u32 reg;
- rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
- rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT3, 0);
- rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT6, 0);
- rt2x00_set_field32(®, GPIO_CTRL_CFG_BIT3, 0);
- rt2x00_set_field32(®, GPIO_CTRL_CFG_BIT6, 0);
+ rt2800_register_read(rt2x00dev, GPIO_CTRL, ®);
+ rt2x00_set_field32(®, GPIO_CTRL_DIR3, 0);
+ rt2x00_set_field32(®, GPIO_CTRL_DIR6, 0);
+ rt2x00_set_field32(®, GPIO_CTRL_VAL3, 0);
+ rt2x00_set_field32(®, GPIO_CTRL_VAL6, 0);
if (ant == 0)
- rt2x00_set_field32(®, GPIO_CTRL_CFG_BIT3, 1);
+ rt2x00_set_field32(®, GPIO_CTRL_VAL3, 1);
else if (ant == 1)
- rt2x00_set_field32(®, GPIO_CTRL_CFG_BIT6, 1);
- rt2800_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+ rt2x00_set_field32(®, GPIO_CTRL_VAL6, 1);
+ rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
}
/* This chip has hardware antenna diversity*/
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 4765bbd..0965540 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1000,9 +1000,9 @@
* Enable rfkill polling by setting GPIO direction of the
* rfkill switch GPIO pin correctly.
*/
- rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
- rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT2, 1);
- rt2x00pci_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+ rt2x00pci_register_read(rt2x00dev, GPIO_CTRL, ®);
+ rt2x00_set_field32(®, GPIO_CTRL_DIR2, 1);
+ rt2x00pci_register_write(rt2x00dev, GPIO_CTRL, reg);
/*
* Initialize hw specifications.
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 6b4226b..b13b314 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -761,9 +761,9 @@
* Enable rfkill polling by setting GPIO direction of the
* rfkill switch GPIO pin correctly.
*/
- rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
- rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT2, 1);
- rt2x00usb_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+ rt2x00usb_register_read(rt2x00dev, GPIO_CTRL, ®);
+ rt2x00_set_field32(®, GPIO_CTRL_DIR2, 1);
+ rt2x00usb_register_write(rt2x00dev, GPIO_CTRL, reg);
/*
* Initialize hw specifications.
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index b8ec961..2673e05 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -243,7 +243,7 @@
u32 reg;
rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®);
- return rt2x00_get_field32(reg, MAC_CSR13_BIT5);
+ return rt2x00_get_field32(reg, MAC_CSR13_VAL5);
}
#ifdef CONFIG_RT2X00_LIB_LEDS
@@ -715,11 +715,11 @@
rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®);
- rt2x00_set_field32(®, MAC_CSR13_BIT4, p1);
- rt2x00_set_field32(®, MAC_CSR13_BIT12, 0);
+ rt2x00_set_field32(®, MAC_CSR13_DIR4, 0);
+ rt2x00_set_field32(®, MAC_CSR13_VAL4, p1);
- rt2x00_set_field32(®, MAC_CSR13_BIT3, !p2);
- rt2x00_set_field32(®, MAC_CSR13_BIT11, 0);
+ rt2x00_set_field32(®, MAC_CSR13_DIR3, 0);
+ rt2x00_set_field32(®, MAC_CSR13_VAL3, !p2);
rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
}
@@ -2855,7 +2855,7 @@
* rfkill switch GPIO pin correctly.
*/
rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®);
- rt2x00_set_field32(®, MAC_CSR13_BIT13, 1);
+ rt2x00_set_field32(®, MAC_CSR13_DIR5, 1);
rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
/*
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 9ee0c33..9bc6b60 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -357,20 +357,22 @@
/*
* MAC_CSR13: GPIO.
+ * MAC_CSR13_VALx: GPIO value
+ * MAC_CSR13_DIRx: GPIO direction: 0 = output; 1 = input
*/
#define MAC_CSR13 0x3034
-#define MAC_CSR13_BIT0 FIELD32(0x00000001)
-#define MAC_CSR13_BIT1 FIELD32(0x00000002)
-#define MAC_CSR13_BIT2 FIELD32(0x00000004)
-#define MAC_CSR13_BIT3 FIELD32(0x00000008)
-#define MAC_CSR13_BIT4 FIELD32(0x00000010)
-#define MAC_CSR13_BIT5 FIELD32(0x00000020)
-#define MAC_CSR13_BIT8 FIELD32(0x00000100)
-#define MAC_CSR13_BIT9 FIELD32(0x00000200)
-#define MAC_CSR13_BIT10 FIELD32(0x00000400)
-#define MAC_CSR13_BIT11 FIELD32(0x00000800)
-#define MAC_CSR13_BIT12 FIELD32(0x00001000)
-#define MAC_CSR13_BIT13 FIELD32(0x00002000)
+#define MAC_CSR13_VAL0 FIELD32(0x00000001)
+#define MAC_CSR13_VAL1 FIELD32(0x00000002)
+#define MAC_CSR13_VAL2 FIELD32(0x00000004)
+#define MAC_CSR13_VAL3 FIELD32(0x00000008)
+#define MAC_CSR13_VAL4 FIELD32(0x00000010)
+#define MAC_CSR13_VAL5 FIELD32(0x00000020)
+#define MAC_CSR13_DIR0 FIELD32(0x00000100)
+#define MAC_CSR13_DIR1 FIELD32(0x00000200)
+#define MAC_CSR13_DIR2 FIELD32(0x00000400)
+#define MAC_CSR13_DIR3 FIELD32(0x00000800)
+#define MAC_CSR13_DIR4 FIELD32(0x00001000)
+#define MAC_CSR13_DIR5 FIELD32(0x00002000)
/*
* MAC_CSR14: LED control register.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 248436c..cfa9f37 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -189,7 +189,7 @@
u32 reg;
rt2x00usb_register_read(rt2x00dev, MAC_CSR13, ®);
- return rt2x00_get_field32(reg, MAC_CSR13_BIT7);
+ return rt2x00_get_field32(reg, MAC_CSR13_VAL7);
}
#ifdef CONFIG_RT2X00_LIB_LEDS
@@ -2195,7 +2195,7 @@
* rfkill switch GPIO pin correctly.
*/
rt2x00usb_register_read(rt2x00dev, MAC_CSR13, ®);
- rt2x00_set_field32(®, MAC_CSR13_BIT15, 0);
+ rt2x00_set_field32(®, MAC_CSR13_DIR7, 0);
rt2x00usb_register_write(rt2x00dev, MAC_CSR13, reg);
/*
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index df1cc11..7577e0b 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -267,24 +267,26 @@
/*
* MAC_CSR13: GPIO.
+ * MAC_CSR13_VALx: GPIO value
+ * MAC_CSR13_DIRx: GPIO direction: 0 = input; 1 = output
*/
#define MAC_CSR13 0x3034
-#define MAC_CSR13_BIT0 FIELD32(0x00000001)
-#define MAC_CSR13_BIT1 FIELD32(0x00000002)
-#define MAC_CSR13_BIT2 FIELD32(0x00000004)
-#define MAC_CSR13_BIT3 FIELD32(0x00000008)
-#define MAC_CSR13_BIT4 FIELD32(0x00000010)
-#define MAC_CSR13_BIT5 FIELD32(0x00000020)
-#define MAC_CSR13_BIT6 FIELD32(0x00000040)
-#define MAC_CSR13_BIT7 FIELD32(0x00000080)
-#define MAC_CSR13_BIT8 FIELD32(0x00000100)
-#define MAC_CSR13_BIT9 FIELD32(0x00000200)
-#define MAC_CSR13_BIT10 FIELD32(0x00000400)
-#define MAC_CSR13_BIT11 FIELD32(0x00000800)
-#define MAC_CSR13_BIT12 FIELD32(0x00001000)
-#define MAC_CSR13_BIT13 FIELD32(0x00002000)
-#define MAC_CSR13_BIT14 FIELD32(0x00004000)
-#define MAC_CSR13_BIT15 FIELD32(0x00008000)
+#define MAC_CSR13_VAL0 FIELD32(0x00000001)
+#define MAC_CSR13_VAL1 FIELD32(0x00000002)
+#define MAC_CSR13_VAL2 FIELD32(0x00000004)
+#define MAC_CSR13_VAL3 FIELD32(0x00000008)
+#define MAC_CSR13_VAL4 FIELD32(0x00000010)
+#define MAC_CSR13_VAL5 FIELD32(0x00000020)
+#define MAC_CSR13_VAL6 FIELD32(0x00000040)
+#define MAC_CSR13_VAL7 FIELD32(0x00000080)
+#define MAC_CSR13_DIR0 FIELD32(0x00000100)
+#define MAC_CSR13_DIR1 FIELD32(0x00000200)
+#define MAC_CSR13_DIR2 FIELD32(0x00000400)
+#define MAC_CSR13_DIR3 FIELD32(0x00000800)
+#define MAC_CSR13_DIR4 FIELD32(0x00001000)
+#define MAC_CSR13_DIR5 FIELD32(0x00002000)
+#define MAC_CSR13_DIR6 FIELD32(0x00004000)
+#define MAC_CSR13_DIR7 FIELD32(0x00008000)
/*
* MAC_CSR14: LED control register.