usb: dwc3: add u2exit lfps quirk
This patch adds u2exit lfps quirk, and some special platforms can configure
that if it is needed.
[ balbi@ti.com : added DeviceTree binding documentation ]
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 2b0c1f2..5fcd680 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -18,6 +18,7 @@
Only really useful for FPGA builds.
- snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled
- snps,lpm-nyet-threshold: LPM NYET threshold
+ - snps,u2exit_lfps_quirk: set if we want to enable u2exit lfps quirk
This is usually a subnode to DWC3 glue to which it is connected.
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 6f9e5b85..33cbea5 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -473,6 +473,9 @@
else
reg &= ~DWC3_GCTL_DISSCRAMBLE;
+ if (dwc->u2exit_lfps_quirk)
+ reg |= DWC3_GCTL_U2EXIT_LFPS;
+
/*
* WORKAROUND: DWC3 revisions <1.90a have a bug
* where the device can fail to connect at SuperSpeed
@@ -729,6 +732,8 @@
dwc->disable_scramble_quirk = of_property_read_bool(node,
"snps,disable_scramble_quirk");
+ dwc->u2exit_lfps_quirk = of_property_read_bool(node,
+ "snps,u2exit_lfps_quirk");
} else if (pdata) {
dwc->maximum_speed = pdata->maximum_speed;
dwc->has_lpm_erratum = pdata->has_lpm_erratum;
@@ -739,6 +744,7 @@
dwc->dr_mode = pdata->dr_mode;
dwc->disable_scramble_quirk = pdata->disable_scramble_quirk;
+ dwc->u2exit_lfps_quirk = pdata->u2exit_lfps_quirk;
}
/* default to superspeed if no maximum_speed passed */
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 34f1e08..f93145c 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -166,6 +166,7 @@
#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4)
#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3)
#define DWC3_GCTL_DISSCRAMBLE (1 << 3)
+#define DWC3_GCTL_U2EXIT_LFPS (1 << 2)
#define DWC3_GCTL_GBLHIBERNATIONEN (1 << 1)
#define DWC3_GCTL_DSBLCLKGTNG (1 << 0)
@@ -679,6 +680,7 @@
* @start_config_issued: true when StartConfig command has been issued
* @three_stage_setup: set if we perform a three phase setup
* @disable_scramble_quirk: set if we enable the disable scramble quirk
+ * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk
*/
struct dwc3 {
struct usb_ctrlrequest *ctrl_req;
@@ -787,6 +789,7 @@
unsigned three_stage_setup:1;
unsigned disable_scramble_quirk:1;
+ unsigned u2exit_lfps_quirk:1;
};
/* -------------------------------------------------------------------------- */
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index e128308..3f21591 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -29,4 +29,5 @@
unsigned disable_scramble_quirk:1;
unsigned has_lpm_erratum:1;
+ unsigned u2exit_lfps_quirk:1;
};