net/mlx4_core: Add support for filtering multicast loopback
Update device capabilities regarding HW filtering multicast loopback support.
Add MLX4_UPDATE_QP_ETH_SRC_CHECK_MC_LB attribute to mlx4_update_qp to
enable changing QP context to support filtering incoming multicast
loopback traffic according the sender's counter index.
Set the corresponding bits in QP context to force the loopback source
checks if attribute is given and HW supports it.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index 731423c..502f335 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -770,9 +770,12 @@
}
}
+ /* preserve IF_COUNTER flag */
+ qpc->pri_path.vlan_control &=
+ MLX4_CTRL_ETH_SRC_CHECK_IF_COUNTER;
if (vp_oper->state.link_state == IFLA_VF_LINK_STATE_DISABLE &&
dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_UPDATE_QP) {
- qpc->pri_path.vlan_control =
+ qpc->pri_path.vlan_control |=
MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED |
MLX4_VLAN_CTRL_ETH_TX_BLOCK_PRIO_TAGGED |
MLX4_VLAN_CTRL_ETH_TX_BLOCK_UNTAGGED |
@@ -780,12 +783,12 @@
MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED |
MLX4_VLAN_CTRL_ETH_RX_BLOCK_TAGGED;
} else if (0 != vp_oper->state.default_vlan) {
- qpc->pri_path.vlan_control =
+ qpc->pri_path.vlan_control |=
MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED |
MLX4_VLAN_CTRL_ETH_RX_BLOCK_PRIO_TAGGED |
MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED;
} else { /* priority tagged */
- qpc->pri_path.vlan_control =
+ qpc->pri_path.vlan_control |=
MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED |
MLX4_VLAN_CTRL_ETH_RX_BLOCK_TAGGED;
}
@@ -3762,9 +3765,6 @@
update_gid(dev, inbox, (u8)slave);
adjust_proxy_tun_qkey(dev, vhcr, qpc);
orig_sched_queue = qpc->pri_path.sched_queue;
- err = update_vport_qp_param(dev, inbox, slave, qpn);
- if (err)
- return err;
err = get_res(dev, slave, qpn, RES_QP, &qp);
if (err)
@@ -3774,6 +3774,10 @@
goto out;
}
+ err = update_vport_qp_param(dev, inbox, slave, qpn);
+ if (err)
+ goto out;
+
err = mlx4_DMA_wrapper(dev, slave, vhcr, inbox, outbox, cmd);
out:
/* if no error, save sched queue value passed in by VF. This is
@@ -4208,7 +4212,9 @@
}
-#define MLX4_UPD_QP_PATH_MASK_SUPPORTED (1ULL << MLX4_UPD_QP_PATH_MASK_MAC_INDEX)
+#define MLX4_UPD_QP_PATH_MASK_SUPPORTED ( \
+ 1ULL << MLX4_UPD_QP_PATH_MASK_MAC_INDEX |\
+ 1ULL << MLX4_UPD_QP_PATH_MASK_ETH_SRC_CHECK_MC_LB)
int mlx4_UPDATE_QP_wrapper(struct mlx4_dev *dev, int slave,
struct mlx4_vhcr *vhcr,
struct mlx4_cmd_mailbox *inbox,
@@ -4231,6 +4237,16 @@
(pri_addr_path_mask & ~MLX4_UPD_QP_PATH_MASK_SUPPORTED))
return -EPERM;
+ if ((pri_addr_path_mask &
+ (1ULL << MLX4_UPD_QP_PATH_MASK_ETH_SRC_CHECK_MC_LB)) &&
+ !(dev->caps.flags2 &
+ MLX4_DEV_CAP_FLAG2_UPDATE_QP_SRC_CHECK_LB)) {
+ mlx4_warn(dev,
+ "Src check LB for slave %d isn't supported\n",
+ slave);
+ return -ENOTSUPP;
+ }
+
/* Just change the smac for the QP */
err = get_res(dev, slave, qpn, RES_QP, &rqp);
if (err) {