mwifiex: common set_wiphy_params cfg80211 handler for AP and STA interface
Add support for setting fragmentation threshold, RTS threshold
and retry limit.
Since wiphy parameters are properties of physical device,
appropriate function to set phy parameters is invoked depending
upon bss_type(STA or AP) for each virtual interface.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index a8fa5cb..daa7b4b 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -428,18 +428,13 @@
static int
mwifiex_set_frag(struct mwifiex_private *priv, u32 frag_thr)
{
- int ret;
-
if (frag_thr < MWIFIEX_FRAG_MIN_VALUE ||
frag_thr > MWIFIEX_FRAG_MAX_VALUE)
- return -EINVAL;
+ frag_thr = MWIFIEX_FRAG_MAX_VALUE;
- /* Send request to firmware */
- ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
- HostCmd_ACT_GEN_SET, FRAG_THRESH_I,
- &frag_thr);
-
- return ret;
+ return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
+ HostCmd_ACT_GEN_SET, FRAG_THRESH_I,
+ &frag_thr);
}
/*
@@ -469,20 +464,84 @@
mwifiex_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
{
struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy);
- struct mwifiex_private *priv = mwifiex_get_priv(adapter,
- MWIFIEX_BSS_ROLE_STA);
- int ret = 0;
+ struct mwifiex_private *priv;
+ struct mwifiex_uap_bss_param *bss_cfg;
+ int ret, bss_started, i;
- if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
- ret = mwifiex_set_rts(priv, wiphy->rts_threshold);
- if (ret)
- return ret;
+ for (i = 0; i < adapter->priv_num; i++) {
+ priv = adapter->priv[i];
+
+ switch (priv->bss_role) {
+ case MWIFIEX_BSS_ROLE_UAP:
+ bss_cfg = kzalloc(sizeof(struct mwifiex_uap_bss_param),
+ GFP_KERNEL);
+ if (!bss_cfg)
+ return -ENOMEM;
+
+ mwifiex_set_sys_config_invalid_data(bss_cfg);
+
+ if (changed & WIPHY_PARAM_RTS_THRESHOLD)
+ bss_cfg->rts_threshold = wiphy->rts_threshold;
+ if (changed & WIPHY_PARAM_FRAG_THRESHOLD)
+ bss_cfg->frag_threshold = wiphy->frag_threshold;
+ if (changed & WIPHY_PARAM_RETRY_LONG)
+ bss_cfg->retry_limit = wiphy->retry_long;
+
+ bss_started = priv->bss_started;
+
+ ret = mwifiex_send_cmd_sync(priv,
+ HostCmd_CMD_UAP_BSS_STOP,
+ HostCmd_ACT_GEN_SET, 0,
+ NULL);
+ if (ret) {
+ wiphy_err(wiphy, "Failed to stop the BSS\n");
+ kfree(bss_cfg);
+ return ret;
+ }
+
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_UAP_SYS_CONFIG,
+ HostCmd_ACT_GEN_SET,
+ 0, bss_cfg);
+
+ kfree(bss_cfg);
+
+ if (ret) {
+ wiphy_err(wiphy, "Failed to set bss config\n");
+ return ret;
+ }
+
+ if (!bss_started)
+ break;
+
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_UAP_BSS_START,
+ HostCmd_ACT_GEN_SET, 0,
+ NULL);
+ if (ret) {
+ wiphy_err(wiphy, "Failed to start BSS\n");
+ return ret;
+ }
+
+ break;
+ case MWIFIEX_BSS_ROLE_STA:
+ if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
+ ret = mwifiex_set_rts(priv,
+ wiphy->rts_threshold);
+ if (ret)
+ return ret;
+ }
+ if (changed & WIPHY_PARAM_FRAG_THRESHOLD) {
+ ret = mwifiex_set_frag(priv,
+ wiphy->frag_threshold);
+ if (ret)
+ return ret;
+ }
+ break;
+ }
}
- if (changed & WIPHY_PARAM_FRAG_THRESHOLD)
- ret = mwifiex_set_frag(priv, wiphy->frag_threshold);
-
- return ret;
+ return 0;
}
/*