USB: legousbtower.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away. This patch removes it from being used in the
driver and uses dev_err() instead.
CC: Juergen Stuber <starblue@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 5752220..a2702cb 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -354,8 +354,8 @@
interface = usb_find_interface (&tower_driver, subminor);
if (!interface) {
- err ("%s - error, can't find device for minor %d",
- __func__, subminor);
+ printk(KERN_ERR "%s - error, can't find device for minor %d\n",
+ __func__, subminor);
retval = -ENODEV;
goto exit;
}
@@ -397,7 +397,8 @@
sizeof(reset_reply),
1000);
if (result < 0) {
- err("LEGO USB Tower reset control request failed");
+ dev_err(&dev->udev->dev,
+ "LEGO USB Tower reset control request failed\n");
retval = result;
goto unlock_exit;
}
@@ -420,7 +421,8 @@
retval = usb_submit_urb (dev->interrupt_in_urb, GFP_KERNEL);
if (retval) {
- err("Couldn't submit interrupt_in_urb %d", retval);
+ dev_err(&dev->udev->dev,
+ "Couldn't submit interrupt_in_urb %d\n", retval);
dev->interrupt_in_running = 0;
dev->open_count = 0;
goto unlock_exit;
@@ -608,7 +610,7 @@
/* verify that the device wasn't unplugged */
if (dev->udev == NULL) {
retval = -ENODEV;
- err("No device or device unplugged %d", retval);
+ printk(KERN_ERR "legousbtower: No device or device unplugged %d\n", retval);
goto unlock_exit;
}
@@ -697,7 +699,7 @@
/* verify that the device wasn't unplugged */
if (dev->udev == NULL) {
retval = -ENODEV;
- err("No device or device unplugged %d", retval);
+ printk(KERN_ERR "legousbtower: No device or device unplugged %d\n", retval);
goto unlock_exit;
}
@@ -744,7 +746,8 @@
retval = usb_submit_urb (dev->interrupt_out_urb, GFP_KERNEL);
if (retval) {
dev->interrupt_out_busy = 0;
- err("Couldn't submit interrupt_out_urb %d", retval);
+ dev_err(&dev->udev->dev,
+ "Couldn't submit interrupt_out_urb %d\n", retval);
goto unlock_exit;
}
retval = bytes_to_write;
@@ -803,9 +806,10 @@
/* resubmit if we're still running */
if (dev->interrupt_in_running && dev->udev) {
retval = usb_submit_urb (dev->interrupt_in_urb, GFP_ATOMIC);
- if (retval) {
- err("%s: usb_submit_urb failed (%d)", __func__, retval);
- }
+ if (retval)
+ dev_err(&dev->udev->dev,
+ "%s: usb_submit_urb failed (%d)\n",
+ __func__, retval);
}
exit:
@@ -852,6 +856,7 @@
*/
static int tower_probe (struct usb_interface *interface, const struct usb_device_id *id)
{
+ struct device *idev = &interface->dev;
struct usb_device *udev = interface_to_usbdev(interface);
struct lego_usb_tower *dev = NULL;
struct usb_host_interface *iface_desc;
@@ -871,7 +876,7 @@
dev = kmalloc (sizeof(struct lego_usb_tower), GFP_KERNEL);
if (dev == NULL) {
- err ("Out of memory");
+ dev_err(idev, "Out of memory\n");
goto exit;
}
@@ -915,37 +920,37 @@
}
}
if(dev->interrupt_in_endpoint == NULL) {
- err("interrupt in endpoint not found");
+ dev_err(idev, "interrupt in endpoint not found\n");
goto error;
}
if (dev->interrupt_out_endpoint == NULL) {
- err("interrupt out endpoint not found");
+ dev_err(idev, "interrupt out endpoint not found\n");
goto error;
}
dev->read_buffer = kmalloc (read_buffer_size, GFP_KERNEL);
if (!dev->read_buffer) {
- err("Couldn't allocate read_buffer");
+ dev_err(idev, "Couldn't allocate read_buffer\n");
goto error;
}
dev->interrupt_in_buffer = kmalloc (usb_endpoint_maxp(dev->interrupt_in_endpoint), GFP_KERNEL);
if (!dev->interrupt_in_buffer) {
- err("Couldn't allocate interrupt_in_buffer");
+ dev_err(idev, "Couldn't allocate interrupt_in_buffer\n");
goto error;
}
dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->interrupt_in_urb) {
- err("Couldn't allocate interrupt_in_urb");
+ dev_err(idev, "Couldn't allocate interrupt_in_urb\n");
goto error;
}
dev->interrupt_out_buffer = kmalloc (write_buffer_size, GFP_KERNEL);
if (!dev->interrupt_out_buffer) {
- err("Couldn't allocate interrupt_out_buffer");
+ dev_err(idev, "Couldn't allocate interrupt_out_buffer\n");
goto error;
}
dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->interrupt_out_urb) {
- err("Couldn't allocate interrupt_out_urb");
+ dev_err(idev, "Couldn't allocate interrupt_out_urb\n");
goto error;
}
dev->interrupt_in_interval = interrupt_in_interval ? interrupt_in_interval : dev->interrupt_in_endpoint->bInterval;
@@ -958,7 +963,7 @@
if (retval) {
/* something prevented us from registering this driver */
- err ("Not able to get a minor for this device.");
+ dev_err(idev, "Not able to get a minor for this device.\n");
usb_set_intfdata (interface, NULL);
goto error;
}
@@ -980,7 +985,7 @@
sizeof(get_version_reply),
1000);
if (result < 0) {
- err("LEGO USB Tower get version control request failed");
+ dev_err(idev, "LEGO USB Tower get version control request failed\n");
retval = result;
goto error;
}