b43: Only select allowed TX and RX antennas
This fixes antenna selection in b43. It adds a sanity check
for the antenna numbers we get from mac80211.
This patch depends on
ssb: Fix extraction of values from SPROM
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 68bbe8e..f4c1427 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2692,8 +2692,36 @@
return err;
}
-static int b43_antenna_from_ieee80211(u8 antenna)
+/* Check if the use of the antenna that ieee80211 told us to
+ * use is possible. This will fall back to DEFAULT.
+ * "antenna_nr" is the antenna identifier we got from ieee80211. */
+u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev,
+ u8 antenna_nr)
{
+ u8 antenna_mask;
+
+ if (antenna_nr == 0) {
+ /* Zero means "use default antenna". That's always OK. */
+ return 0;
+ }
+
+ /* Get the mask of available antennas. */
+ if (dev->phy.gmode)
+ antenna_mask = dev->dev->bus->sprom.ant_available_bg;
+ else
+ antenna_mask = dev->dev->bus->sprom.ant_available_a;
+
+ if (!(antenna_mask & (1 << (antenna_nr - 1)))) {
+ /* This antenna is not available. Fall back to default. */
+ return 0;
+ }
+
+ return antenna_nr;
+}
+
+static int b43_antenna_from_ieee80211(struct b43_wldev *dev, u8 antenna)
+{
+ antenna = b43_ieee80211_antenna_sanitize(dev, antenna);
switch (antenna) {
case 0: /* default/diversity */
return B43_ANTENNA_DEFAULT;
@@ -2713,14 +2741,10 @@
struct b43_phy *phy;
unsigned long flags;
unsigned int new_phymode = 0xFFFF;
- int antenna_tx;
- int antenna_rx;
+ int antenna;
int err = 0;
u32 savedirqs;
- antenna_tx = b43_antenna_from_ieee80211(conf->antenna_sel_tx);
- antenna_rx = b43_antenna_from_ieee80211(conf->antenna_sel_rx);
-
mutex_lock(&wl->mutex);
/* Switch the PHY mode (if necessary). */
@@ -2781,8 +2805,10 @@
}
/* Antennas for RX and management frame TX. */
- b43_mgmtframe_txantenna(dev, antenna_tx);
- b43_set_rx_antenna(dev, antenna_rx);
+ antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_tx);
+ b43_mgmtframe_txantenna(dev, antenna);
+ antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_rx);
+ b43_set_rx_antenna(dev, antenna);
/* Update templates for AP mode. */
if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h
index a8503ef..2d52d9d 100644
--- a/drivers/net/wireless/b43/main.h
+++ b/drivers/net/wireless/b43/main.h
@@ -84,6 +84,9 @@
return !b43_is_cck_rate(rate);
}
+u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev,
+ u8 antenna_nr);
+
void b43_tsf_read(struct b43_wldev *dev, u64 * tsf);
void b43_tsf_write(struct b43_wldev *dev, u64 tsf);
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index e60e54d..3d312768 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -270,14 +270,15 @@
phy_ctl |= B43_TX4_PHY_OFDM;
if (dev->short_preamble)
phy_ctl |= B43_TX4_PHY_SHORTPRMBL;
- switch (txctl->antenna_sel_tx) {
- case 0:
+
+ switch (b43_ieee80211_antenna_sanitize(dev, txctl->antenna_sel_tx)) {
+ case 0: /* Default */
phy_ctl |= B43_TX4_PHY_ANTLAST;
break;
- case 1:
+ case 1: /* Antenna 0 */
phy_ctl |= B43_TX4_PHY_ANT0;
break;
- case 2:
+ case 2: /* Antenna 1 */
phy_ctl |= B43_TX4_PHY_ANT1;
break;
default: