iwlwifi: mvm: add thermal throttling and CT kill
In order to avoid NIC destruction due to high temperature,
CT kill will power down the NIC.
To avoid this, thermal throttling will decrease throughput
to prevent the NIC from reaching the temperature at which
CT kill is performed.
Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 20e845d..a276af4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -472,4 +472,23 @@
#define IWL_HOST_INT_CALIB_TIMEOUT_DEF (0x10)
#define IWL_HOST_INT_CALIB_TIMEOUT_MIN (0x0)
+/*****************************************************************************
+ * 7000/3000 series SHR DTS addresses *
+ *****************************************************************************/
+
+/* Diode Results Register Structure: */
+enum dtd_diode_reg {
+ DTS_DIODE_REG_DIG_VAL = 0x000000FF, /* bits [7:0] */
+ DTS_DIODE_REG_VREF_LOW = 0x0000FF00, /* bits [15:8] */
+ DTS_DIODE_REG_VREF_HIGH = 0x00FF0000, /* bits [23:16] */
+ DTS_DIODE_REG_VREF_ID = 0x03000000, /* bits [25:24] */
+ DTS_DIODE_REG_PASS_ONCE = 0x80000000, /* bits [31:31] */
+ DTS_DIODE_REG_FLAGS_MSK = 0xFF000000, /* bits [31:24] */
+/* Those are the masks INSIDE the flags bit-field: */
+ DTS_DIODE_REG_FLAGS_VREFS_ID_POS = 0,
+ DTS_DIODE_REG_FLAGS_VREFS_ID = 0x00000003, /* bits [1:0] */
+ DTS_DIODE_REG_FLAGS_PASS_ONCE_POS = 7,
+ DTS_DIODE_REG_FLAGS_PASS_ONCE = 0x00000080, /* bits [7:7] */
+};
+
#endif /* !__iwl_csr_h__ */