pwm: imx: Use bitops and bitfield macros to define register values
Use existing macros to define register fields instead of manually shifting
the bit masks. Also define some more register bits.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index bcbcac4..7a4907b 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -5,6 +5,8 @@
* Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
*/
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
@@ -23,7 +25,7 @@
#define MX1_PWMS 0x04 /* PWM Sample Register */
#define MX1_PWMP 0x08 /* PWM Period Register */
-#define MX1_PWMC_EN (1 << 4)
+#define MX1_PWMC_EN BIT(4)
/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
@@ -31,18 +33,53 @@
#define MX3_PWMSR 0x04 /* PWM Status Register */
#define MX3_PWMSAR 0x0C /* PWM Sample Register */
#define MX3_PWMPR 0x10 /* PWM Period Register */
-#define MX3_PWMCR_PRESCALER(x) ((((x) - 1) & 0xFFF) << 4)
-#define MX3_PWMCR_STOPEN (1 << 25)
-#define MX3_PWMCR_DOZEEN (1 << 24)
-#define MX3_PWMCR_WAITEN (1 << 23)
-#define MX3_PWMCR_DBGEN (1 << 22)
-#define MX3_PWMCR_POUTC (1 << 18)
-#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
-#define MX3_PWMCR_CLKSRC_IPG (1 << 16)
-#define MX3_PWMCR_SWR (1 << 3)
-#define MX3_PWMCR_EN (1 << 0)
-#define MX3_PWMSR_FIFOAV_4WORDS 0x4
-#define MX3_PWMSR_FIFOAV_MASK 0x7
+
+#define MX3_PWMCR_FWM GENMASK(27, 26)
+#define MX3_PWMCR_STOPEN BIT(25)
+#define MX3_PWMCR_DOZEN BIT(24)
+#define MX3_PWMCR_WAITEN BIT(23)
+#define MX3_PWMCR_DBGEN BIT(22)
+#define MX3_PWMCR_BCTR BIT(21)
+#define MX3_PWMCR_HCTR BIT(20)
+
+#define MX3_PWMCR_POUTC GENMASK(19, 18)
+#define MX3_PWMCR_POUTC_NORMAL 0
+#define MX3_PWMCR_POUTC_INVERTED 1
+#define MX3_PWMCR_POUTC_OFF 2
+
+#define MX3_PWMCR_CLKSRC GENMASK(17, 16)
+#define MX3_PWMCR_CLKSRC_OFF 0
+#define MX3_PWMCR_CLKSRC_IPG 1
+#define MX3_PWMCR_CLKSRC_IPG_HIGH 2
+#define MX3_PWMCR_CLKSRC_IPG_32K 3
+
+#define MX3_PWMCR_PRESCALER GENMASK(15, 4)
+
+#define MX3_PWMCR_SWR BIT(3)
+
+#define MX3_PWMCR_REPEAT GENMASK(2, 1)
+#define MX3_PWMCR_REPEAT_1X 0
+#define MX3_PWMCR_REPEAT_2X 1
+#define MX3_PWMCR_REPEAT_4X 2
+#define MX3_PWMCR_REPEAT_8X 3
+
+#define MX3_PWMCR_EN BIT(0)
+
+#define MX3_PWMSR_FWE BIT(6)
+#define MX3_PWMSR_CMP BIT(5)
+#define MX3_PWMSR_ROV BIT(4)
+#define MX3_PWMSR_FE BIT(3)
+
+#define MX3_PWMSR_FIFOAV GENMASK(2, 0)
+#define MX3_PWMSR_FIFOAV_EMPTY 0
+#define MX3_PWMSR_FIFOAV_1WORD 1
+#define MX3_PWMSR_FIFOAV_2WORDS 2
+#define MX3_PWMSR_FIFOAV_3WORDS 3
+#define MX3_PWMSR_FIFOAV_4WORDS 4
+
+#define MX3_PWMCR_PRESCALER_SET(x) FIELD_PREP(MX3_PWMCR_PRESCALER, (x) - 1)
+#define MX3_PWMCR_PRESCALER_GET(x) (FIELD_GET(MX3_PWMCR_PRESCALER, \
+ (x)) + 1)
#define MX3_PWM_SWR_LOOP 5
@@ -142,14 +179,14 @@
u32 sr;
sr = readl(imx->mmio_base + MX3_PWMSR);
- fifoav = sr & MX3_PWMSR_FIFOAV_MASK;
+ fifoav = FIELD_GET(MX3_PWMSR_FIFOAV, sr);
if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
period_ms = DIV_ROUND_UP(pwm_get_period(pwm),
NSEC_PER_MSEC);
msleep(period_ms);
sr = readl(imx->mmio_base + MX3_PWMSR);
- if (fifoav == (sr & MX3_PWMSR_FIFOAV_MASK))
+ if (fifoav == FIELD_GET(MX3_PWMSR_FIFOAV, sr))
dev_warn(dev, "there is no free FIFO slot\n");
}
}
@@ -207,13 +244,14 @@
writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
writel(period_cycles, imx->mmio_base + MX3_PWMPR);
- cr = MX3_PWMCR_PRESCALER(prescale) |
- MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
- MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH |
- MX3_PWMCR_EN;
+ cr = MX3_PWMCR_PRESCALER_SET(prescale) |
+ MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN |
+ FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) |
+ MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
if (state->polarity == PWM_POLARITY_INVERSED)
- cr |= MX3_PWMCR_POUTC;
+ cr |= FIELD_PREP(MX3_PWMCR_POUTC,
+ MX3_PWMCR_POUTC_INVERTED);
writel(cr, imx->mmio_base + MX3_PWMCR);
} else if (cstate.enabled) {