TTY: hso, use tty from tty_port
We switched tty refcounting there to the one provided by tty_port
helpers. So tty_port->tty is now protected by tty_port->lock, not by
hso_serial->serial_lock.
Side note: tty->driver_data does not need the lock, so it is needed
neither in open, nor in close paths.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jan Dumon <j.dumon@option.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index ec782c7..813d709 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -250,7 +250,6 @@
struct tty_port port;
/* from usb_serial_port */
- struct tty_struct *tty;
spinlock_t serial_lock;
int (*write_data) (struct hso_serial *serial);
@@ -1297,11 +1296,8 @@
kref_get(&serial->parent->ref);
/* setup */
- spin_lock_irq(&serial->serial_lock);
tty->driver_data = serial;
- tty_kref_put(serial->tty);
- serial->tty = tty_kref_get(tty);
- spin_unlock_irq(&serial->serial_lock);
+ tty_port_tty_set(&serial->port, tty);
/* check for port already opened, if not set the termios */
serial->port.count++;
@@ -1358,13 +1354,7 @@
if (serial->port.count <= 0) {
serial->port.count = 0;
- spin_lock_irq(&serial->serial_lock);
- if (serial->tty == tty) {
- serial->tty->driver_data = NULL;
- serial->tty = NULL;
- tty_kref_put(tty);
- }
- spin_unlock_irq(&serial->serial_lock);
+ tty_port_tty_set(&serial->port, NULL);
if (!usb_gone)
hso_stop_serial_device(serial->parent);
tasklet_kill(&serial->unthrottle_tasklet);
@@ -1947,14 +1937,13 @@
spin_lock(&serial->serial_lock);
serial->tx_urb_used = 0;
- tty = tty_kref_get(serial->tty);
spin_unlock(&serial->serial_lock);
if (status) {
handle_usb_error(status, __func__, serial->parent);
- tty_kref_put(tty);
return;
}
hso_put_activity(serial->parent);
+ tty = tty_port_tty_get(&serial->port);
if (tty) {
tty_wakeup(tty);
tty_kref_put(tty);
@@ -1994,7 +1983,6 @@
struct hso_serial *serial = urb->context;
struct usb_ctrlrequest *req;
int status = urb->status;
- struct tty_struct *tty;
/* sanity check */
if (!serial)
@@ -2002,11 +1990,9 @@
spin_lock(&serial->serial_lock);
serial->tx_urb_used = 0;
- tty = tty_kref_get(serial->tty);
spin_unlock(&serial->serial_lock);
if (status) {
handle_usb_error(status, __func__, serial->parent);
- tty_kref_put(tty);
return;
}
@@ -2024,13 +2010,15 @@
put_rxbuf_data_and_resubmit_ctrl_urb(serial);
spin_unlock(&serial->serial_lock);
} else {
+ struct tty_struct *tty = tty_port_tty_get(&serial->port);
hso_put_activity(serial->parent);
- if (tty)
+ if (tty) {
tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
/* response to a write command */
hso_kick_transmit(serial);
}
- tty_kref_put(tty);
}
/* handle RX data for serial port */
@@ -2046,8 +2034,7 @@
return -2;
}
- /* All callers to put_rxbuf_data hold serial_lock */
- tty = tty_kref_get(serial->tty);
+ tty = tty_port_tty_get(&serial->port);
/* Push data to tty */
if (tty) {
@@ -2067,12 +2054,12 @@
write_length_remaining -= curr_write_len;
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
}
if (write_length_remaining == 0) {
serial->curr_rx_urb_offset = 0;
serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
}
- tty_kref_put(tty);
return write_length_remaining;
}
@@ -3166,13 +3153,12 @@
if (serial_table[i] &&
(serial_table[i]->interface == interface)) {
hso_dev = dev2ser(serial_table[i]);
- spin_lock_irq(&hso_dev->serial_lock);
- tty = tty_kref_get(hso_dev->tty);
- spin_unlock_irq(&hso_dev->serial_lock);
- if (tty)
+ tty = tty_port_tty_get(&hso_dev->port);
+ if (tty) {
tty_hangup(tty);
+ tty_kref_put(tty);
+ }
mutex_lock(&hso_dev->parent->mutex);
- tty_kref_put(tty);
hso_dev->parent->usb_gone = 1;
mutex_unlock(&hso_dev->parent->mutex);
kref_put(&serial_table[i]->ref, hso_serial_ref_free);