diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index e88e877..3393ce7 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1151,7 +1151,8 @@
 	/* This command will only fail if the endpoint wasn't halted,
 	 * but we don't care.
 	 */
-	xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
+	xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
+		"Ignoring reset ep completion code of %u",
 		 GET_COMP_CODE(le32_to_cpu(event->status)));
 
 	/* HW with the reset endpoint quirk needs to have a configure endpoint
diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h
index f0447c6..757b26f 100644
--- a/drivers/usb/host/xhci-trace.h
+++ b/drivers/usb/host/xhci-trace.h
@@ -46,6 +46,11 @@
 	TP_ARGS(vaf)
 );
 
+DEFINE_EVENT(xhci_log_msg, xhci_dbg_reset_ep,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf)
+);
+
 #endif /* __XHCI_TRACE_H */
 
 /* this part must be outside header guard */
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index ffb3ed0..18c710d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2818,7 +2818,8 @@
 	struct xhci_dequeue_state deq_state;
 	struct xhci_virt_ep *ep;
 
-	xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
+	xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
+			"Cleaning up stalled endpoint ring");
 	ep = &xhci->devs[udev->slot_id]->eps[ep_index];
 	/* We need to move the HW's dequeue pointer past this TD,
 	 * or it will attempt to resend it on the next doorbell ring.
@@ -2831,7 +2832,8 @@
 	 * issue a configure endpoint command later.
 	 */
 	if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
-		xhci_dbg(xhci, "Queueing new dequeue state\n");
+		xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
+				"Queueing new dequeue state");
 		xhci_queue_new_dequeue_state(xhci, udev->slot_id,
 				ep_index, ep->stopped_stream, &deq_state);
 	} else {
@@ -2874,16 +2876,19 @@
 	ep_index = xhci_get_endpoint_index(&ep->desc);
 	virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index];
 	if (!virt_ep->stopped_td) {
-		xhci_dbg(xhci, "Endpoint 0x%x not halted, refusing to reset.\n",
-				ep->desc.bEndpointAddress);
+		xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
+			"Endpoint 0x%x not halted, refusing to reset.",
+			ep->desc.bEndpointAddress);
 		return;
 	}
 	if (usb_endpoint_xfer_control(&ep->desc)) {
-		xhci_dbg(xhci, "Control endpoint stall already handled.\n");
+		xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
+				"Control endpoint stall already handled.");
 		return;
 	}
 
-	xhci_dbg(xhci, "Queueing reset endpoint command\n");
+	xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
+			"Queueing reset endpoint command");
 	spin_lock_irqsave(&xhci->lock, flags);
 	ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index);
 	/*