staging/hfi1: set Gen3 half-swing for integrated devices
Correctly set half-swing for integrated devices. A0 needs all fields set for
CcePcieCtrl. B0 and later only need a few fields set.
Reviewed-by: Stuart Summers <john.s.summers@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
diff --git a/drivers/staging/rdma/hfi1/chip_registers.h b/drivers/staging/rdma/hfi1/chip_registers.h
index 701e9e1..014d7a6 100644
--- a/drivers/staging/rdma/hfi1/chip_registers.h
+++ b/drivers/staging/rdma/hfi1/chip_registers.h
@@ -551,6 +551,17 @@
#define CCE_MSIX_TABLE_UPPER (CCE + 0x000000100008)
#define CCE_MSIX_TABLE_UPPER_RESETCSR 0x0000000100000000ull
#define CCE_MSIX_VEC_CLR_WITHOUT_INT (CCE + 0x000000110400)
+#define CCE_PCIE_CTRL (CCE + 0x0000000000C0)
+#define CCE_PCIE_CTRL_PCIE_LANE_BUNDLE_MASK 0x3ull
+#define CCE_PCIE_CTRL_PCIE_LANE_BUNDLE_SHIFT 0
+#define CCE_PCIE_CTRL_PCIE_LANE_DELAY_MASK 0xFull
+#define CCE_PCIE_CTRL_PCIE_LANE_DELAY_SHIFT 2
+#define CCE_PCIE_CTRL_XMT_MARGIN_OVERWRITE_ENABLE_SHIFT 8
+#define CCE_PCIE_CTRL_XMT_MARGIN_SHIFT 9
+#define CCE_PCIE_CTRL_XMT_MARGIN_GEN1_GEN2_OVERWRITE_ENABLE_MASK 0x1ull
+#define CCE_PCIE_CTRL_XMT_MARGIN_GEN1_GEN2_OVERWRITE_ENABLE_SHIFT 12
+#define CCE_PCIE_CTRL_XMT_MARGIN_GEN1_GEN2_MASK 0x7ull
+#define CCE_PCIE_CTRL_XMT_MARGIN_GEN1_GEN2_SHIFT 13
#define CCE_REVISION (CCE + 0x000000000000)
#define CCE_REVISION2 (CCE + 0x000000000008)
#define CCE_REVISION2_HFI_ID_MASK 0x1ull
diff --git a/drivers/staging/rdma/hfi1/pcie.c b/drivers/staging/rdma/hfi1/pcie.c
index 8317b07..9917faf 100644
--- a/drivers/staging/rdma/hfi1/pcie.c
+++ b/drivers/staging/rdma/hfi1/pcie.c
@@ -867,6 +867,83 @@
}
/*
+ * CCE_PCIE_CTRL long name helpers
+ * We redefine these shorter macros to use in the code while leaving
+ * chip_registers.h to be autogenerated from the hardware spec.
+ */
+#define LANE_BUNDLE_MASK CCE_PCIE_CTRL_PCIE_LANE_BUNDLE_MASK
+#define LANE_BUNDLE_SHIFT CCE_PCIE_CTRL_PCIE_LANE_BUNDLE_SHIFT
+#define LANE_DELAY_MASK CCE_PCIE_CTRL_PCIE_LANE_DELAY_MASK
+#define LANE_DELAY_SHIFT CCE_PCIE_CTRL_PCIE_LANE_DELAY_SHIFT
+#define MARGIN_OVERWRITE_ENABLE_SHIFT CCE_PCIE_CTRL_XMT_MARGIN_OVERWRITE_ENABLE_SHIFT
+#define MARGIN_SHIFT CCE_PCIE_CTRL_XMT_MARGIN_SHIFT
+#define MARGIN_G1_G2_OVERWRITE_MASK CCE_PCIE_CTRL_XMT_MARGIN_GEN1_GEN2_OVERWRITE_ENABLE_MASK
+#define MARGIN_G1_G2_OVERWRITE_SHIFT CCE_PCIE_CTRL_XMT_MARGIN_GEN1_GEN2_OVERWRITE_ENABLE_SHIFT
+#define MARGIN_GEN1_GEN2_MASK CCE_PCIE_CTRL_XMT_MARGIN_GEN1_GEN2_MASK
+#define MARGIN_GEN1_GEN2_SHIFT CCE_PCIE_CTRL_XMT_MARGIN_GEN1_GEN2_SHIFT
+
+ /*
+ * Write xmt_margin for full-swing (WFR-B) or half-swing (WFR-C).
+ */
+static void write_xmt_margin(struct hfi1_devdata *dd, const char *fname)
+{
+ u64 pcie_ctrl;
+ u64 xmt_margin;
+ u64 xmt_margin_oe;
+ u64 lane_delay;
+ u64 lane_bundle;
+
+ pcie_ctrl = read_csr(dd, CCE_PCIE_CTRL);
+
+ /*
+ * For Discrete, use full-swing.
+ * - PCIe TX defaults to full-swing.
+ * Leave this register as default.
+ * For Integrated, use half-swing
+ * - Copy xmt_margin and xmt_margin_oe
+ * from Gen1/Gen2 to Gen3.
+ */
+ if (dd->pcidev->device == PCI_DEVICE_ID_INTEL1) { /* integrated */
+ /* extract initial fields */
+ xmt_margin = (pcie_ctrl >> MARGIN_GEN1_GEN2_SHIFT)
+ & MARGIN_GEN1_GEN2_MASK;
+ xmt_margin_oe = (pcie_ctrl >> MARGIN_G1_G2_OVERWRITE_SHIFT)
+ & MARGIN_G1_G2_OVERWRITE_MASK;
+ lane_delay = (pcie_ctrl >> LANE_DELAY_SHIFT) & LANE_DELAY_MASK;
+ lane_bundle = (pcie_ctrl >> LANE_BUNDLE_SHIFT)
+ & LANE_BUNDLE_MASK;
+
+ /*
+ * For A0, EFUSE values are not set. Override with the
+ * correct values.
+ */
+ if (is_ax(dd)) {
+ /*
+ * xmt_margin and OverwiteEnabel should be the
+ * same for Gen1/Gen2 and Gen3
+ */
+ xmt_margin = 0x5;
+ xmt_margin_oe = 0x1;
+ lane_delay = 0xF; /* Delay 240ns. */
+ lane_bundle = 0x0; /* Set to 1 lane. */
+ }
+
+ /* overwrite existing values */
+ pcie_ctrl = (xmt_margin << MARGIN_GEN1_GEN2_SHIFT)
+ | (xmt_margin_oe << MARGIN_G1_G2_OVERWRITE_SHIFT)
+ | (xmt_margin << MARGIN_SHIFT)
+ | (xmt_margin_oe << MARGIN_OVERWRITE_ENABLE_SHIFT)
+ | (lane_delay << LANE_DELAY_SHIFT)
+ | (lane_bundle << LANE_BUNDLE_SHIFT);
+
+ write_csr(dd, CCE_PCIE_CTRL, pcie_ctrl);
+ }
+
+ dd_dev_dbg(dd, "%s: program XMT margin, CcePcieCtrl 0x%llx\n",
+ fname, pcie_ctrl);
+}
+
+/*
* Do all the steps needed to transition the PCIe link to Gen3 speed.
*/
int do_pcie_gen3_transition(struct hfi1_devdata *dd)
@@ -1064,11 +1141,8 @@
/*
* step 5d: program XMT margin
- * Right now, leave the default alone. To change, do a
- * read-modify-write of:
- * CcePcieCtrl.XmtMargin
- * CcePcieCtrl.XmitMarginOverwriteEnable
*/
+ write_xmt_margin(dd, __func__);
/* step 5e: disable active state power management (ASPM) */
dd_dev_info(dd, "%s: clearing ASPM\n", __func__);