[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index d219845..55e6447 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -20,7 +20,7 @@
#include <linux/delay.h>
#include <linux/mm.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/setup.h>
@@ -34,8 +34,8 @@
#include <asm/mach/irda.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/mcp.h>
+#include <mach/assabet.h>
+#include <mach/mcp.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index d087c3b..3efefbd 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -23,10 +23,10 @@
#include <linux/mtd/partitions.h>
#include <linux/errno.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
@@ -34,7 +34,7 @@
#include <asm/hardware/sa1111.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/badge4.h>
+#include <mach/badge4.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index cfb65eb..fd3ad9c 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -19,7 +19,7 @@
#include <linux/mtd/partitions.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -28,8 +28,8 @@
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/cerf.h>
-#include <asm/arch/mcp.h>
+#include <mach/cerf.h>
+#include <mach/mcp.h>
#include "generic.h"
static struct resource cerfuart2_resources[] = {
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index dbd1aaaa..43c30f8 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -11,7 +11,7 @@
#include <linux/spinlock.h>
#include <linux/mutex.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
/*
* Very simple clock implementation - we only have one clock to
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 4089363..fe28999 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -26,11 +26,11 @@
#include <linux/mtd/partitions.h>
#include <linux/timer.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/setup.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
@@ -40,7 +40,7 @@
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/locomo.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
index daa9d57..b1161fc 100644
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ b/arch/arm/mach-sa1100/collie_pm.c
@@ -24,10 +24,10 @@
#include <linux/platform_device.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/scoop.h>
#include <asm/dma.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/sharpsl_pm.h>
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index 61df76f..da3a898 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -88,7 +88,7 @@
#include <linux/init.h>
#include <linux/cpufreq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index a471f9f..39d38c8 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -26,7 +26,7 @@
#include <linux/delay.h>
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index 65d96ee..f990a3e 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -18,7 +18,7 @@
#include <asm/system.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/dma.h>
@@ -76,7 +76,7 @@
* address of the hardware registers for that channel as the channel
* identifier. This identifier is written to the location pointed by
* @dma_regs. The list of possible values for @device are listed into
- * linux/include/asm-arm/arch-sa1100/dma.h as a dma_device_t enum.
+ * arch/arm/mach-sa1100/include/mach/dma.h as a dma_device_t enum.
*
* Note that reading from a port and writing to the same port are
* actually considered as two different streams requiring separate
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index e616130..5a08fe2 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -21,7 +21,7 @@
#include <asm/div64.h>
#include <asm/cnt32_to_63.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-sa1100/gpio.c b/arch/arm/mach-sa1100/gpio.c
index 184b04c..0d3829a 100644
--- a/arch/arm/mach-sa1100/gpio.c
+++ b/arch/arm/mach-sa1100/gpio.c
@@ -12,7 +12,7 @@
#include <linux/module.h>
#include <asm/gpio.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include "generic.h"
static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 8c560ae..af25a78 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -30,7 +30,7 @@
#include <linux/serial_core.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
@@ -41,14 +41,14 @@
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/h3600.h>
+#include <mach/h3600.h>
#if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
-#include <asm/arch/h3600_gpio.h>
+#include <mach/h3600_gpio.h>
#endif
#ifdef CONFIG_SA1100_H3800
-#include <asm/arch/h3600_asic.h>
+#include <mach/h3600_asic.h>
#endif
#include "generic.h"
@@ -681,7 +681,7 @@
#define MAX_ASIC_ISR_LOOPS 20
-/* The order of these is important - see #include <asm/arch/irqs.h> */
+/* The order of these is important - see #include <mach/irqs.h> */
static u32 kpio_irq_mask[] = {
KPIO_KEY_ALL,
KPIO_SPI_INT,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 270feb0..e7056c0 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -22,7 +22,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/page.h>
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
new file mode 100644
index 0000000..62aaf04
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -0,0 +1,2072 @@
+/*
+ * FILE SA-1100.h
+ *
+ * Version 1.2
+ * Author Copyright (c) Marc A. Viredaz, 1998
+ * DEC Western Research Laboratory, Palo Alto, CA
+ * Date January 1998 (April 1997)
+ * System StrongARM SA-1100
+ * Language C or ARM Assembly
+ * Purpose Definition of constants related to the StrongARM
+ * SA-1100 microprocessor (Advanced RISC Machine (ARM)
+ * architecture version 4). This file is based on the
+ * StrongARM SA-1100 data sheet version 2.2.
+ *
+ */
+
+
+/* Be sure that virtual mapping is defined right */
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not SA-1100.h
+#endif
+
+#include "bitfield.h"
+
+/*
+ * SA1100 CS line to physical address
+ */
+
+#define SA1100_CS0_PHYS 0x00000000
+#define SA1100_CS1_PHYS 0x08000000
+#define SA1100_CS2_PHYS 0x10000000
+#define SA1100_CS3_PHYS 0x18000000
+#define SA1100_CS4_PHYS 0x40000000
+#define SA1100_CS5_PHYS 0x48000000
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
+#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
+#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
+#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
+#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
+
+#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
+#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
+#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
+
+#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
+#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
+#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
+
+#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
+ (0x20000000 + (Nb)*PCMCIASp)
+#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
+#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
+ (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
+#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
+ (_PCMCIA (Nb) + 3*PCMCIAPrtSp)
+
+#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
+#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
+#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
+#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
+
+#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
+#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
+#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
+#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
+
+
+/*
+ * Universal Serial Bus (USB) Device Controller (UDC) control registers
+ *
+ * Registers
+ * Ser0UDCCR Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Control Register (read/write).
+ * Ser0UDCAR Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Address Register (read/write).
+ * Ser0UDCOMP Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Output Maximum Packet size register
+ * (read/write).
+ * Ser0UDCIMP Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Input Maximum Packet size register
+ * (read/write).
+ * Ser0UDCCS0 Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Control/Status register end-point 0
+ * (read/write).
+ * Ser0UDCCS1 Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Control/Status register end-point 1
+ * (output, read/write).
+ * Ser0UDCCS2 Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Control/Status register end-point 2
+ * (input, read/write).
+ * Ser0UDCD0 Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Data register end-point 0
+ * (read/write).
+ * Ser0UDCWC Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Write Count register end-point 0
+ * (read).
+ * Ser0UDCDR Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Data Register (read/write).
+ * Ser0UDCSR Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Status Register (read/write).
+ */
+
+#define Ser0UDCCR __REG(0x80000000) /* Ser. port 0 UDC Control Reg. */
+#define Ser0UDCAR __REG(0x80000004) /* Ser. port 0 UDC Address Reg. */
+#define Ser0UDCOMP __REG(0x80000008) /* Ser. port 0 UDC Output Maximum Packet size reg. */
+#define Ser0UDCIMP __REG(0x8000000C) /* Ser. port 0 UDC Input Maximum Packet size reg. */
+#define Ser0UDCCS0 __REG(0x80000010) /* Ser. port 0 UDC Control/Status reg. end-point 0 */
+#define Ser0UDCCS1 __REG(0x80000014) /* Ser. port 0 UDC Control/Status reg. end-point 1 (output) */
+#define Ser0UDCCS2 __REG(0x80000018) /* Ser. port 0 UDC Control/Status reg. end-point 2 (input) */
+#define Ser0UDCD0 __REG(0x8000001C) /* Ser. port 0 UDC Data reg. end-point 0 */
+#define Ser0UDCWC __REG(0x80000020) /* Ser. port 0 UDC Write Count reg. end-point 0 */
+#define Ser0UDCDR __REG(0x80000028) /* Ser. port 0 UDC Data Reg. */
+#define Ser0UDCSR __REG(0x80000030) /* Ser. port 0 UDC Status Reg. */
+
+#define UDCCR_UDD 0x00000001 /* UDC Disable */
+#define UDCCR_UDA 0x00000002 /* UDC Active (read) */
+#define UDCCR_RESIM 0x00000004 /* Resume Interrupt Mask, per errata */
+#define UDCCR_EIM 0x00000008 /* End-point 0 Interrupt Mask */
+ /* (disable) */
+#define UDCCR_RIM 0x00000010 /* Receive Interrupt Mask */
+ /* (disable) */
+#define UDCCR_TIM 0x00000020 /* Transmit Interrupt Mask */
+ /* (disable) */
+#define UDCCR_SRM 0x00000040 /* Suspend/Resume interrupt Mask */
+ /* (disable) */
+#define UDCCR_SUSIM UDCCR_SRM /* Per errata, SRM just masks suspend */
+#define UDCCR_REM 0x00000080 /* REset interrupt Mask (disable) */
+
+#define UDCAR_ADD Fld (7, 0) /* function ADDress */
+
+#define UDCOMP_OUTMAXP Fld (8, 0) /* OUTput MAXimum Packet size - 1 */
+ /* [byte] */
+#define UDCOMP_OutMaxPkt(Size) /* Output Maximum Packet size */ \
+ /* [1..256 byte] */ \
+ (((Size) - 1) << FShft (UDCOMP_OUTMAXP))
+
+#define UDCIMP_INMAXP Fld (8, 0) /* INput MAXimum Packet size - 1 */
+ /* [byte] */
+#define UDCIMP_InMaxPkt(Size) /* Input Maximum Packet size */ \
+ /* [1..256 byte] */ \
+ (((Size) - 1) << FShft (UDCIMP_INMAXP))
+
+#define UDCCS0_OPR 0x00000001 /* Output Packet Ready (read) */
+#define UDCCS0_IPR 0x00000002 /* Input Packet Ready */
+#define UDCCS0_SST 0x00000004 /* Sent STall */
+#define UDCCS0_FST 0x00000008 /* Force STall */
+#define UDCCS0_DE 0x00000010 /* Data End */
+#define UDCCS0_SE 0x00000020 /* Setup End (read) */
+#define UDCCS0_SO 0x00000040 /* Serviced Output packet ready */
+ /* (write) */
+#define UDCCS0_SSE 0x00000080 /* Serviced Setup End (write) */
+
+#define UDCCS1_RFS 0x00000001 /* Receive FIFO 12-bytes or more */
+ /* Service request (read) */
+#define UDCCS1_RPC 0x00000002 /* Receive Packet Complete */
+#define UDCCS1_RPE 0x00000004 /* Receive Packet Error (read) */
+#define UDCCS1_SST 0x00000008 /* Sent STall */
+#define UDCCS1_FST 0x00000010 /* Force STall */
+#define UDCCS1_RNE 0x00000020 /* Receive FIFO Not Empty (read) */
+
+#define UDCCS2_TFS 0x00000001 /* Transmit FIFO 8-bytes or less */
+ /* Service request (read) */
+#define UDCCS2_TPC 0x00000002 /* Transmit Packet Complete */
+#define UDCCS2_TPE 0x00000004 /* Transmit Packet Error (read) */
+#define UDCCS2_TUR 0x00000008 /* Transmit FIFO Under-Run */
+#define UDCCS2_SST 0x00000010 /* Sent STall */
+#define UDCCS2_FST 0x00000020 /* Force STall */
+
+#define UDCD0_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
+
+#define UDCWC_WC Fld (4, 0) /* Write Count */
+
+#define UDCDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
+
+#define UDCSR_EIR 0x00000001 /* End-point 0 Interrupt Request */
+#define UDCSR_RIR 0x00000002 /* Receive Interrupt Request */
+#define UDCSR_TIR 0x00000004 /* Transmit Interrupt Request */
+#define UDCSR_SUSIR 0x00000008 /* SUSpend Interrupt Request */
+#define UDCSR_RESIR 0x00000010 /* RESume Interrupt Request */
+#define UDCSR_RSTIR 0x00000020 /* ReSeT Interrupt Request */
+
+
+/*
+ * Universal Asynchronous Receiver/Transmitter (UART) control registers
+ *
+ * Registers
+ * Ser1UTCR0 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 0
+ * (read/write).
+ * Ser1UTCR1 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 1
+ * (read/write).
+ * Ser1UTCR2 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 2
+ * (read/write).
+ * Ser1UTCR3 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 3
+ * (read/write).
+ * Ser1UTDR Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Data Register
+ * (read/write).
+ * Ser1UTSR0 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 0
+ * (read/write).
+ * Ser1UTSR1 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 1 (read).
+ *
+ * Ser2UTCR0 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 0
+ * (read/write).
+ * Ser2UTCR1 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 1
+ * (read/write).
+ * Ser2UTCR2 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 2
+ * (read/write).
+ * Ser2UTCR3 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 3
+ * (read/write).
+ * Ser2UTCR4 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 4
+ * (read/write).
+ * Ser2UTDR Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Data Register
+ * (read/write).
+ * Ser2UTSR0 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 0
+ * (read/write).
+ * Ser2UTSR1 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 1 (read).
+ *
+ * Ser3UTCR0 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 0
+ * (read/write).
+ * Ser3UTCR1 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 1
+ * (read/write).
+ * Ser3UTCR2 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 2
+ * (read/write).
+ * Ser3UTCR3 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 3
+ * (read/write).
+ * Ser3UTDR Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Data Register
+ * (read/write).
+ * Ser3UTSR0 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 0
+ * (read/write).
+ * Ser3UTSR1 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 1 (read).
+ *
+ * Clocks
+ * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
+ * or 3.5795 MHz).
+ * fua, Tua Frequency, period of the UART communication.
+ */
+
+#define _UTCR0(Nb) __REG(0x80010000 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 0 [1..3] */
+#define _UTCR1(Nb) __REG(0x80010004 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 1 [1..3] */
+#define _UTCR2(Nb) __REG(0x80010008 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 2 [1..3] */
+#define _UTCR3(Nb) __REG(0x8001000C + ((Nb) - 1)*0x00020000) /* UART Control Reg. 3 [1..3] */
+#define _UTCR4(Nb) __REG(0x80010010 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 4 [2] */
+#define _UTDR(Nb) __REG(0x80010014 + ((Nb) - 1)*0x00020000) /* UART Data Reg. [1..3] */
+#define _UTSR0(Nb) __REG(0x8001001C + ((Nb) - 1)*0x00020000) /* UART Status Reg. 0 [1..3] */
+#define _UTSR1(Nb) __REG(0x80010020 + ((Nb) - 1)*0x00020000) /* UART Status Reg. 1 [1..3] */
+
+#define Ser1UTCR0 _UTCR0 (1) /* Ser. port 1 UART Control Reg. 0 */
+#define Ser1UTCR1 _UTCR1 (1) /* Ser. port 1 UART Control Reg. 1 */
+#define Ser1UTCR2 _UTCR2 (1) /* Ser. port 1 UART Control Reg. 2 */
+#define Ser1UTCR3 _UTCR3 (1) /* Ser. port 1 UART Control Reg. 3 */
+#define Ser1UTDR _UTDR (1) /* Ser. port 1 UART Data Reg. */
+#define Ser1UTSR0 _UTSR0 (1) /* Ser. port 1 UART Status Reg. 0 */
+#define Ser1UTSR1 _UTSR1 (1) /* Ser. port 1 UART Status Reg. 1 */
+
+#define Ser2UTCR0 _UTCR0 (2) /* Ser. port 2 UART Control Reg. 0 */
+#define Ser2UTCR1 _UTCR1 (2) /* Ser. port 2 UART Control Reg. 1 */
+#define Ser2UTCR2 _UTCR2 (2) /* Ser. port 2 UART Control Reg. 2 */
+#define Ser2UTCR3 _UTCR3 (2) /* Ser. port 2 UART Control Reg. 3 */
+#define Ser2UTCR4 _UTCR4 (2) /* Ser. port 2 UART Control Reg. 4 */
+#define Ser2UTDR _UTDR (2) /* Ser. port 2 UART Data Reg. */
+#define Ser2UTSR0 _UTSR0 (2) /* Ser. port 2 UART Status Reg. 0 */
+#define Ser2UTSR1 _UTSR1 (2) /* Ser. port 2 UART Status Reg. 1 */
+
+#define Ser3UTCR0 _UTCR0 (3) /* Ser. port 3 UART Control Reg. 0 */
+#define Ser3UTCR1 _UTCR1 (3) /* Ser. port 3 UART Control Reg. 1 */
+#define Ser3UTCR2 _UTCR2 (3) /* Ser. port 3 UART Control Reg. 2 */
+#define Ser3UTCR3 _UTCR3 (3) /* Ser. port 3 UART Control Reg. 3 */
+#define Ser3UTDR _UTDR (3) /* Ser. port 3 UART Data Reg. */
+#define Ser3UTSR0 _UTSR0 (3) /* Ser. port 3 UART Status Reg. 0 */
+#define Ser3UTSR1 _UTSR1 (3) /* Ser. port 3 UART Status Reg. 1 */
+
+/* Those are still used in some places */
+#define _Ser1UTCR0 __PREG(Ser1UTCR0)
+#define _Ser2UTCR0 __PREG(Ser2UTCR0)
+#define _Ser3UTCR0 __PREG(Ser3UTCR0)
+
+/* Register offsets */
+#define UTCR0 0x00
+#define UTCR1 0x04
+#define UTCR2 0x08
+#define UTCR3 0x0c
+#define UTDR 0x14
+#define UTSR0 0x1c
+#define UTSR1 0x20
+
+#define UTCR0_PE 0x00000001 /* Parity Enable */
+#define UTCR0_OES 0x00000002 /* Odd/Even parity Select */
+#define UTCR0_OddPar (UTCR0_OES*0) /* Odd Parity */
+#define UTCR0_EvenPar (UTCR0_OES*1) /* Even Parity */
+#define UTCR0_SBS 0x00000004 /* Stop Bit Select */
+#define UTCR0_1StpBit (UTCR0_SBS*0) /* 1 Stop Bit per frame */
+#define UTCR0_2StpBit (UTCR0_SBS*1) /* 2 Stop Bits per frame */
+#define UTCR0_DSS 0x00000008 /* Data Size Select */
+#define UTCR0_7BitData (UTCR0_DSS*0) /* 7-Bit Data */
+#define UTCR0_8BitData (UTCR0_DSS*1) /* 8-Bit Data */
+#define UTCR0_SCE 0x00000010 /* Sample Clock Enable */
+ /* (ser. port 1: GPIO [18], */
+ /* ser. port 3: GPIO [20]) */
+#define UTCR0_RCE 0x00000020 /* Receive Clock Edge select */
+#define UTCR0_RcRsEdg (UTCR0_RCE*0) /* Receive clock Rising-Edge */
+#define UTCR0_RcFlEdg (UTCR0_RCE*1) /* Receive clock Falling-Edge */
+#define UTCR0_TCE 0x00000040 /* Transmit Clock Edge select */
+#define UTCR0_TrRsEdg (UTCR0_TCE*0) /* Transmit clock Rising-Edge */
+#define UTCR0_TrFlEdg (UTCR0_TCE*1) /* Transmit clock Falling-Edge */
+#define UTCR0_Ser2IrDA /* Ser. port 2 IrDA settings */ \
+ (UTCR0_1StpBit + UTCR0_8BitData)
+
+#define UTCR1_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */
+#define UTCR2_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */
+ /* fua = fxtl/(16*(BRD[11:0] + 1)) */
+ /* Tua = 16*(BRD [11:0] + 1)*Txtl */
+#define UTCR1_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
+ (((Div) - 16)/16 >> FSize (UTCR2_BRD) << \
+ FShft (UTCR1_BRD))
+#define UTCR2_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
+ (((Div) - 16)/16 & FAlnMsk (UTCR2_BRD) << \
+ FShft (UTCR2_BRD))
+ /* fua = fxtl/(16*Floor (Div/16)) */
+ /* Tua = 16*Floor (Div/16)*Txtl */
+#define UTCR1_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
+ (((Div) - 1)/16 >> FSize (UTCR2_BRD) << \
+ FShft (UTCR1_BRD))
+#define UTCR2_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
+ (((Div) - 1)/16 & FAlnMsk (UTCR2_BRD) << \
+ FShft (UTCR2_BRD))
+ /* fua = fxtl/(16*Ceil (Div/16)) */
+ /* Tua = 16*Ceil (Div/16)*Txtl */
+
+#define UTCR3_RXE 0x00000001 /* Receive Enable */
+#define UTCR3_TXE 0x00000002 /* Transmit Enable */
+#define UTCR3_BRK 0x00000004 /* BReaK mode */
+#define UTCR3_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */
+ /* more Interrupt Enable */
+#define UTCR3_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */
+ /* Interrupt Enable */
+#define UTCR3_LBM 0x00000020 /* Look-Back Mode */
+#define UTCR3_Ser2IrDA /* Ser. port 2 IrDA settings (RIE, */ \
+ /* TIE, LBM can be set or cleared) */ \
+ (UTCR3_RXE + UTCR3_TXE)
+
+#define UTCR4_HSE 0x00000001 /* Hewlett-Packard Serial InfraRed */
+ /* (HP-SIR) modulation Enable */
+#define UTCR4_NRZ (UTCR4_HSE*0) /* Non-Return to Zero modulation */
+#define UTCR4_HPSIR (UTCR4_HSE*1) /* HP-SIR modulation */
+#define UTCR4_LPM 0x00000002 /* Low-Power Mode */
+#define UTCR4_Z3_16Bit (UTCR4_LPM*0) /* Zero pulse = 3/16 Bit time */
+#define UTCR4_Z1_6us (UTCR4_LPM*1) /* Zero pulse = 1.6 us */
+
+#define UTDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
+#if 0 /* Hidden receive FIFO bits */
+#define UTDR_PRE 0x00000100 /* receive PaRity Error (read) */
+#define UTDR_FRE 0x00000200 /* receive FRaming Error (read) */
+#define UTDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */
+#endif /* 0 */
+
+#define UTSR0_TFS 0x00000001 /* Transmit FIFO 1/2-full or less */
+ /* Service request (read) */
+#define UTSR0_RFS 0x00000002 /* Receive FIFO 1/3-to-2/3-full or */
+ /* more Service request (read) */
+#define UTSR0_RID 0x00000004 /* Receiver IDle */
+#define UTSR0_RBB 0x00000008 /* Receive Beginning of Break */
+#define UTSR0_REB 0x00000010 /* Receive End of Break */
+#define UTSR0_EIF 0x00000020 /* Error In FIFO (read) */
+
+#define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */
+#define UTSR1_RNE 0x00000002 /* Receive FIFO Not Empty (read) */
+#define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */
+#define UTSR1_PRE 0x00000008 /* receive PaRity Error (read) */
+#define UTSR1_FRE 0x00000010 /* receive FRaming Error (read) */
+#define UTSR1_ROR 0x00000020 /* Receive FIFO Over-Run (read) */
+
+
+/*
+ * Synchronous Data Link Controller (SDLC) control registers
+ *
+ * Registers
+ * Ser1SDCR0 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Control Register 0 (read/write).
+ * Ser1SDCR1 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Control Register 1 (read/write).
+ * Ser1SDCR2 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Control Register 2 (read/write).
+ * Ser1SDCR3 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Control Register 3 (read/write).
+ * Ser1SDCR4 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Control Register 4 (read/write).
+ * Ser1SDDR Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Data Register (read/write).
+ * Ser1SDSR0 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Status Register 0 (read/write).
+ * Ser1SDSR1 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Status Register 1 (read/write).
+ *
+ * Clocks
+ * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
+ * or 3.5795 MHz).
+ * fsd, Tsd Frequency, period of the SDLC communication.
+ */
+
+#define Ser1SDCR0 __REG(0x80020060) /* Ser. port 1 SDLC Control Reg. 0 */
+#define Ser1SDCR1 __REG(0x80020064) /* Ser. port 1 SDLC Control Reg. 1 */
+#define Ser1SDCR2 __REG(0x80020068) /* Ser. port 1 SDLC Control Reg. 2 */
+#define Ser1SDCR3 __REG(0x8002006C) /* Ser. port 1 SDLC Control Reg. 3 */
+#define Ser1SDCR4 __REG(0x80020070) /* Ser. port 1 SDLC Control Reg. 4 */
+#define Ser1SDDR __REG(0x80020078) /* Ser. port 1 SDLC Data Reg. */
+#define Ser1SDSR0 __REG(0x80020080) /* Ser. port 1 SDLC Status Reg. 0 */
+#define Ser1SDSR1 __REG(0x80020084) /* Ser. port 1 SDLC Status Reg. 1 */
+
+#define SDCR0_SUS 0x00000001 /* SDLC/UART Select */
+#define SDCR0_SDLC (SDCR0_SUS*0) /* SDLC mode (TXD1 & RXD1) */
+#define SDCR0_UART (SDCR0_SUS*1) /* UART mode (TXD1 & RXD1) */
+#define SDCR0_SDF 0x00000002 /* Single/Double start Flag select */
+#define SDCR0_SglFlg (SDCR0_SDF*0) /* Single start Flag */
+#define SDCR0_DblFlg (SDCR0_SDF*1) /* Double start Flag */
+#define SDCR0_LBM 0x00000004 /* Look-Back Mode */
+#define SDCR0_BMS 0x00000008 /* Bit Modulation Select */
+#define SDCR0_FM0 (SDCR0_BMS*0) /* Freq. Modulation zero (0) */
+#define SDCR0_NRZ (SDCR0_BMS*1) /* Non-Return to Zero modulation */
+#define SDCR0_SCE 0x00000010 /* Sample Clock Enable (GPIO [16]) */
+#define SDCR0_SCD 0x00000020 /* Sample Clock Direction select */
+ /* (GPIO [16]) */
+#define SDCR0_SClkIn (SDCR0_SCD*0) /* Sample Clock Input */
+#define SDCR0_SClkOut (SDCR0_SCD*1) /* Sample Clock Output */
+#define SDCR0_RCE 0x00000040 /* Receive Clock Edge select */
+#define SDCR0_RcRsEdg (SDCR0_RCE*0) /* Receive clock Rising-Edge */
+#define SDCR0_RcFlEdg (SDCR0_RCE*1) /* Receive clock Falling-Edge */
+#define SDCR0_TCE 0x00000080 /* Transmit Clock Edge select */
+#define SDCR0_TrRsEdg (SDCR0_TCE*0) /* Transmit clock Rising-Edge */
+#define SDCR0_TrFlEdg (SDCR0_TCE*1) /* Transmit clock Falling-Edge */
+
+#define SDCR1_AAF 0x00000001 /* Abort After Frame enable */
+ /* (GPIO [17]) */
+#define SDCR1_TXE 0x00000002 /* Transmit Enable */
+#define SDCR1_RXE 0x00000004 /* Receive Enable */
+#define SDCR1_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */
+ /* more Interrupt Enable */
+#define SDCR1_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */
+ /* Interrupt Enable */
+#define SDCR1_AME 0x00000020 /* Address Match Enable */
+#define SDCR1_TUS 0x00000040 /* Transmit FIFO Under-run Select */
+#define SDCR1_EFrmURn (SDCR1_TUS*0) /* End Frame on Under-Run */
+#define SDCR1_AbortURn (SDCR1_TUS*1) /* Abort on Under-Run */
+#define SDCR1_RAE 0x00000080 /* Receive Abort interrupt Enable */
+
+#define SDCR2_AMV Fld (8, 0) /* Address Match Value */
+
+#define SDCR3_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */
+#define SDCR4_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */
+ /* fsd = fxtl/(16*(BRD[11:0] + 1)) */
+ /* Tsd = 16*(BRD[11:0] + 1)*Txtl */
+#define SDCR3_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
+ (((Div) - 16)/16 >> FSize (SDCR4_BRD) << \
+ FShft (SDCR3_BRD))
+#define SDCR4_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
+ (((Div) - 16)/16 & FAlnMsk (SDCR4_BRD) << \
+ FShft (SDCR4_BRD))
+ /* fsd = fxtl/(16*Floor (Div/16)) */
+ /* Tsd = 16*Floor (Div/16)*Txtl */
+#define SDCR3_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
+ (((Div) - 1)/16 >> FSize (SDCR4_BRD) << \
+ FShft (SDCR3_BRD))
+#define SDCR4_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
+ (((Div) - 1)/16 & FAlnMsk (SDCR4_BRD) << \
+ FShft (SDCR4_BRD))
+ /* fsd = fxtl/(16*Ceil (Div/16)) */
+ /* Tsd = 16*Ceil (Div/16)*Txtl */
+
+#define SDDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
+#if 0 /* Hidden receive FIFO bits */
+#define SDDR_EOF 0x00000100 /* receive End-Of-Frame (read) */
+#define SDDR_CRE 0x00000200 /* receive CRC Error (read) */
+#define SDDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */
+#endif /* 0 */
+
+#define SDSR0_EIF 0x00000001 /* Error In FIFO (read) */
+#define SDSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */
+#define SDSR0_RAB 0x00000004 /* Receive ABort */
+#define SDSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */
+ /* Service request (read) */
+#define SDSR0_RFS 0x00000010 /* Receive FIFO 1/3-to-2/3-full or */
+ /* more Service request (read) */
+
+#define SDSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */
+#define SDSR1_TBY 0x00000002 /* Transmitter BusY (read) */
+#define SDSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */
+#define SDSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */
+#define SDSR1_RTD 0x00000010 /* Receive Transition Detected */
+#define SDSR1_EOF 0x00000020 /* receive End-Of-Frame (read) */
+#define SDSR1_CRE 0x00000040 /* receive CRC Error (read) */
+#define SDSR1_ROR 0x00000080 /* Receive FIFO Over-Run (read) */
+
+
+/*
+ * High-Speed Serial to Parallel controller (HSSP) control registers
+ *
+ * Registers
+ * Ser2HSCR0 Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Control Register 0 (read/write).
+ * Ser2HSCR1 Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Control Register 1 (read/write).
+ * Ser2HSDR Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Data Register (read/write).
+ * Ser2HSSR0 Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Status Register 0 (read/write).
+ * Ser2HSSR1 Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Status Register 1 (read).
+ * Ser2HSCR2 Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Control Register 2 (read/write).
+ * [The HSCR2 register is only implemented in
+ * versions 2.0 (rev. = 8) and higher of the StrongARM
+ * SA-1100.]
+ */
+
+#define Ser2HSCR0 __REG(0x80040060) /* Ser. port 2 HSSP Control Reg. 0 */
+#define Ser2HSCR1 __REG(0x80040064) /* Ser. port 2 HSSP Control Reg. 1 */
+#define Ser2HSDR __REG(0x8004006C) /* Ser. port 2 HSSP Data Reg. */
+#define Ser2HSSR0 __REG(0x80040074) /* Ser. port 2 HSSP Status Reg. 0 */
+#define Ser2HSSR1 __REG(0x80040078) /* Ser. port 2 HSSP Status Reg. 1 */
+#define Ser2HSCR2 __REG(0x90060028) /* Ser. port 2 HSSP Control Reg. 2 */
+
+#define HSCR0_ITR 0x00000001 /* IrDA Transmission Rate */
+#define HSCR0_UART (HSCR0_ITR*0) /* UART mode (115.2 kb/s if IrDA) */
+#define HSCR0_HSSP (HSCR0_ITR*1) /* HSSP mode (4 Mb/s) */
+#define HSCR0_LBM 0x00000002 /* Look-Back Mode */
+#define HSCR0_TUS 0x00000004 /* Transmit FIFO Under-run Select */
+#define HSCR0_EFrmURn (HSCR0_TUS*0) /* End Frame on Under-Run */
+#define HSCR0_AbortURn (HSCR0_TUS*1) /* Abort on Under-Run */
+#define HSCR0_TXE 0x00000008 /* Transmit Enable */
+#define HSCR0_RXE 0x00000010 /* Receive Enable */
+#define HSCR0_RIE 0x00000020 /* Receive FIFO 2/5-to-3/5-full or */
+ /* more Interrupt Enable */
+#define HSCR0_TIE 0x00000040 /* Transmit FIFO 1/2-full or less */
+ /* Interrupt Enable */
+#define HSCR0_AME 0x00000080 /* Address Match Enable */
+
+#define HSCR1_AMV Fld (8, 0) /* Address Match Value */
+
+#define HSDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
+#if 0 /* Hidden receive FIFO bits */
+#define HSDR_EOF 0x00000100 /* receive End-Of-Frame (read) */
+#define HSDR_CRE 0x00000200 /* receive CRC Error (read) */
+#define HSDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */
+#endif /* 0 */
+
+#define HSSR0_EIF 0x00000001 /* Error In FIFO (read) */
+#define HSSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */
+#define HSSR0_RAB 0x00000004 /* Receive ABort */
+#define HSSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */
+ /* Service request (read) */
+#define HSSR0_RFS 0x00000010 /* Receive FIFO 2/5-to-3/5-full or */
+ /* more Service request (read) */
+#define HSSR0_FRE 0x00000020 /* receive FRaming Error */
+
+#define HSSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */
+#define HSSR1_TBY 0x00000002 /* Transmitter BusY (read) */
+#define HSSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */
+#define HSSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */
+#define HSSR1_EOF 0x00000010 /* receive End-Of-Frame (read) */
+#define HSSR1_CRE 0x00000020 /* receive CRC Error (read) */
+#define HSSR1_ROR 0x00000040 /* Receive FIFO Over-Run (read) */
+
+#define HSCR2_TXP 0x00040000 /* Transmit data Polarity (TXD_2) */
+#define HSCR2_TrDataL (HSCR2_TXP*0) /* Transmit Data active Low */
+ /* (inverted) */
+#define HSCR2_TrDataH (HSCR2_TXP*1) /* Transmit Data active High */
+ /* (non-inverted) */
+#define HSCR2_RXP 0x00080000 /* Receive data Polarity (RXD_2) */
+#define HSCR2_RcDataL (HSCR2_RXP*0) /* Receive Data active Low */
+ /* (inverted) */
+#define HSCR2_RcDataH (HSCR2_RXP*1) /* Receive Data active High */
+ /* (non-inverted) */
+
+
+/*
+ * Multi-media Communications Port (MCP) control registers
+ *
+ * Registers
+ * Ser4MCCR0 Serial port 4 Multi-media Communications Port (MCP)
+ * Control Register 0 (read/write).
+ * Ser4MCDR0 Serial port 4 Multi-media Communications Port (MCP)
+ * Data Register 0 (audio, read/write).
+ * Ser4MCDR1 Serial port 4 Multi-media Communications Port (MCP)
+ * Data Register 1 (telecom, read/write).
+ * Ser4MCDR2 Serial port 4 Multi-media Communications Port (MCP)
+ * Data Register 2 (CODEC registers, read/write).
+ * Ser4MCSR Serial port 4 Multi-media Communications Port (MCP)
+ * Status Register (read/write).
+ * Ser4MCCR1 Serial port 4 Multi-media Communications Port (MCP)
+ * Control Register 1 (read/write).
+ * [The MCCR1 register is only implemented in
+ * versions 2.0 (rev. = 8) and higher of the StrongARM
+ * SA-1100.]
+ *
+ * Clocks
+ * fmc, Tmc Frequency, period of the MCP communication (10 MHz,
+ * 12 MHz, or GPIO [21]).
+ * faud, Taud Frequency, period of the audio sampling.
+ * ftcm, Ttcm Frequency, period of the telecom sampling.
+ */
+
+#define Ser4MCCR0 __REG(0x80060000) /* Ser. port 4 MCP Control Reg. 0 */
+#define Ser4MCDR0 __REG(0x80060008) /* Ser. port 4 MCP Data Reg. 0 (audio) */
+#define Ser4MCDR1 __REG(0x8006000C) /* Ser. port 4 MCP Data Reg. 1 (telecom) */
+#define Ser4MCDR2 __REG(0x80060010) /* Ser. port 4 MCP Data Reg. 2 (CODEC reg.) */
+#define Ser4MCSR __REG(0x80060018) /* Ser. port 4 MCP Status Reg. */
+#define Ser4MCCR1 __REG(0x90060030) /* Ser. port 4 MCP Control Reg. 1 */
+
+#define MCCR0_ASD Fld (7, 0) /* Audio Sampling rate Divisor/32 */
+ /* [6..127] */
+ /* faud = fmc/(32*ASD) */
+ /* Taud = 32*ASD*Tmc */
+#define MCCR0_AudSmpDiv(Div) /* Audio Sampling rate Divisor */ \
+ /* [192..4064] */ \
+ ((Div)/32 << FShft (MCCR0_ASD))
+ /* faud = fmc/(32*Floor (Div/32)) */
+ /* Taud = 32*Floor (Div/32)*Tmc */
+#define MCCR0_CeilAudSmpDiv(Div) /* Ceil. of AudSmpDiv [192..4064] */ \
+ (((Div) + 31)/32 << FShft (MCCR0_ASD))
+ /* faud = fmc/(32*Ceil (Div/32)) */
+ /* Taud = 32*Ceil (Div/32)*Tmc */
+#define MCCR0_TSD Fld (7, 8) /* Telecom Sampling rate */
+ /* Divisor/32 [16..127] */
+ /* ftcm = fmc/(32*TSD) */
+ /* Ttcm = 32*TSD*Tmc */
+#define MCCR0_TcmSmpDiv(Div) /* Telecom Sampling rate Divisor */ \
+ /* [512..4064] */ \
+ ((Div)/32 << FShft (MCCR0_TSD))
+ /* ftcm = fmc/(32*Floor (Div/32)) */
+ /* Ttcm = 32*Floor (Div/32)*Tmc */
+#define MCCR0_CeilTcmSmpDiv(Div) /* Ceil. of TcmSmpDiv [512..4064] */ \
+ (((Div) + 31)/32 << FShft (MCCR0_TSD))
+ /* ftcm = fmc/(32*Ceil (Div/32)) */
+ /* Ttcm = 32*Ceil (Div/32)*Tmc */
+#define MCCR0_MCE 0x00010000 /* MCP Enable */
+#define MCCR0_ECS 0x00020000 /* External Clock Select */
+#define MCCR0_IntClk (MCCR0_ECS*0) /* Internal Clock (10 or 12 MHz) */
+#define MCCR0_ExtClk (MCCR0_ECS*1) /* External Clock (GPIO [21]) */
+#define MCCR0_ADM 0x00040000 /* A/D (audio/telecom) data */
+ /* sampling/storing Mode */
+#define MCCR0_VldBit (MCCR0_ADM*0) /* Valid Bit storing mode */
+#define MCCR0_SmpCnt (MCCR0_ADM*1) /* Sampling Counter storing mode */
+#define MCCR0_TTE 0x00080000 /* Telecom Transmit FIFO 1/2-full */
+ /* or less interrupt Enable */
+#define MCCR0_TRE 0x00100000 /* Telecom Receive FIFO 1/2-full */
+ /* or more interrupt Enable */
+#define MCCR0_ATE 0x00200000 /* Audio Transmit FIFO 1/2-full */
+ /* or less interrupt Enable */
+#define MCCR0_ARE 0x00400000 /* Audio Receive FIFO 1/2-full or */
+ /* more interrupt Enable */
+#define MCCR0_LBM 0x00800000 /* Look-Back Mode */
+#define MCCR0_ECP Fld (2, 24) /* External Clock Prescaler - 1 */
+#define MCCR0_ExtClkDiv(Div) /* External Clock Divisor [1..4] */ \
+ (((Div) - 1) << FShft (MCCR0_ECP))
+
+#define MCDR0_DATA Fld (12, 4) /* receive/transmit audio DATA */
+ /* FIFOs */
+
+#define MCDR1_DATA Fld (14, 2) /* receive/transmit telecom DATA */
+ /* FIFOs */
+
+ /* receive/transmit CODEC reg. */
+ /* FIFOs: */
+#define MCDR2_DATA Fld (16, 0) /* reg. DATA */
+#define MCDR2_RW 0x00010000 /* reg. Read/Write (transmit) */
+#define MCDR2_Rd (MCDR2_RW*0) /* reg. Read */
+#define MCDR2_Wr (MCDR2_RW*1) /* reg. Write */
+#define MCDR2_ADD Fld (4, 17) /* reg. ADDress */
+
+#define MCSR_ATS 0x00000001 /* Audio Transmit FIFO 1/2-full */
+ /* or less Service request (read) */
+#define MCSR_ARS 0x00000002 /* Audio Receive FIFO 1/2-full or */
+ /* more Service request (read) */
+#define MCSR_TTS 0x00000004 /* Telecom Transmit FIFO 1/2-full */
+ /* or less Service request (read) */
+#define MCSR_TRS 0x00000008 /* Telecom Receive FIFO 1/2-full */
+ /* or more Service request (read) */
+#define MCSR_ATU 0x00000010 /* Audio Transmit FIFO Under-run */
+#define MCSR_ARO 0x00000020 /* Audio Receive FIFO Over-run */
+#define MCSR_TTU 0x00000040 /* Telecom Transmit FIFO Under-run */
+#define MCSR_TRO 0x00000080 /* Telecom Receive FIFO Over-run */
+#define MCSR_ANF 0x00000100 /* Audio transmit FIFO Not Full */
+ /* (read) */
+#define MCSR_ANE 0x00000200 /* Audio receive FIFO Not Empty */
+ /* (read) */
+#define MCSR_TNF 0x00000400 /* Telecom transmit FIFO Not Full */
+ /* (read) */
+#define MCSR_TNE 0x00000800 /* Telecom receive FIFO Not Empty */
+ /* (read) */
+#define MCSR_CWC 0x00001000 /* CODEC register Write Completed */
+ /* (read) */
+#define MCSR_CRC 0x00002000 /* CODEC register Read Completed */
+ /* (read) */
+#define MCSR_ACE 0x00004000 /* Audio CODEC Enabled (read) */
+#define MCSR_TCE 0x00008000 /* Telecom CODEC Enabled (read) */
+
+#define MCCR1_CFS 0x00100000 /* Clock Freq. Select */
+#define MCCR1_F12MHz (MCCR1_CFS*0) /* Freq. (fmc) = ~ 12 MHz */
+ /* (11.981 MHz) */
+#define MCCR1_F10MHz (MCCR1_CFS*1) /* Freq. (fmc) = ~ 10 MHz */
+ /* (9.585 MHz) */
+
+
+/*
+ * Synchronous Serial Port (SSP) control registers
+ *
+ * Registers
+ * Ser4SSCR0 Serial port 4 Synchronous Serial Port (SSP) Control
+ * Register 0 (read/write).
+ * Ser4SSCR1 Serial port 4 Synchronous Serial Port (SSP) Control
+ * Register 1 (read/write).
+ * [Bits SPO and SP are only implemented in versions 2.0
+ * (rev. = 8) and higher of the StrongARM SA-1100.]
+ * Ser4SSDR Serial port 4 Synchronous Serial Port (SSP) Data
+ * Register (read/write).
+ * Ser4SSSR Serial port 4 Synchronous Serial Port (SSP) Status
+ * Register (read/write).
+ *
+ * Clocks
+ * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
+ * or 3.5795 MHz).
+ * fss, Tss Frequency, period of the SSP communication.
+ */
+
+#define Ser4SSCR0 __REG(0x80070060) /* Ser. port 4 SSP Control Reg. 0 */
+#define Ser4SSCR1 __REG(0x80070064) /* Ser. port 4 SSP Control Reg. 1 */
+#define Ser4SSDR __REG(0x8007006C) /* Ser. port 4 SSP Data Reg. */
+#define Ser4SSSR __REG(0x80070074) /* Ser. port 4 SSP Status Reg. */
+
+#define SSCR0_DSS Fld (4, 0) /* Data Size - 1 Select [3..15] */
+#define SSCR0_DataSize(Size) /* Data Size Select [4..16] */ \
+ (((Size) - 1) << FShft (SSCR0_DSS))
+#define SSCR0_FRF Fld (2, 4) /* FRame Format */
+#define SSCR0_Motorola /* Motorola Serial Peripheral */ \
+ /* Interface (SPI) format */ \
+ (0 << FShft (SSCR0_FRF))
+#define SSCR0_TI /* Texas Instruments Synchronous */ \
+ /* Serial format */ \
+ (1 << FShft (SSCR0_FRF))
+#define SSCR0_National /* National Microwire format */ \
+ (2 << FShft (SSCR0_FRF))
+#define SSCR0_SSE 0x00000080 /* SSP Enable */
+#define SSCR0_SCR Fld (8, 8) /* Serial Clock Rate divisor/2 - 1 */
+ /* fss = fxtl/(2*(SCR + 1)) */
+ /* Tss = 2*(SCR + 1)*Txtl */
+#define SSCR0_SerClkDiv(Div) /* Serial Clock Divisor [2..512] */ \
+ (((Div) - 2)/2 << FShft (SSCR0_SCR))
+ /* fss = fxtl/(2*Floor (Div/2)) */
+ /* Tss = 2*Floor (Div/2)*Txtl */
+#define SSCR0_CeilSerClkDiv(Div) /* Ceil. of SerClkDiv [2..512] */ \
+ (((Div) - 1)/2 << FShft (SSCR0_SCR))
+ /* fss = fxtl/(2*Ceil (Div/2)) */
+ /* Tss = 2*Ceil (Div/2)*Txtl */
+
+#define SSCR1_RIE 0x00000001 /* Receive FIFO 1/2-full or more */
+ /* Interrupt Enable */
+#define SSCR1_TIE 0x00000002 /* Transmit FIFO 1/2-full or less */
+ /* Interrupt Enable */
+#define SSCR1_LBM 0x00000004 /* Look-Back Mode */
+#define SSCR1_SPO 0x00000008 /* Sample clock (SCLK) POlarity */
+#define SSCR1_SClkIactL (SSCR1_SPO*0) /* Sample Clock Inactive Low */
+#define SSCR1_SClkIactH (SSCR1_SPO*1) /* Sample Clock Inactive High */
+#define SSCR1_SP 0x00000010 /* Sample clock (SCLK) Phase */
+#define SSCR1_SClk1P (SSCR1_SP*0) /* Sample Clock active 1 Period */
+ /* after frame (SFRM, 1st edge) */
+#define SSCR1_SClk1_2P (SSCR1_SP*1) /* Sample Clock active 1/2 Period */
+ /* after frame (SFRM, 1st edge) */
+#define SSCR1_ECS 0x00000020 /* External Clock Select */
+#define SSCR1_IntClk (SSCR1_ECS*0) /* Internal Clock */
+#define SSCR1_ExtClk (SSCR1_ECS*1) /* External Clock (GPIO [19]) */
+
+#define SSDR_DATA Fld (16, 0) /* receive/transmit DATA FIFOs */
+
+#define SSSR_TNF 0x00000002 /* Transmit FIFO Not Full (read) */
+#define SSSR_RNE 0x00000004 /* Receive FIFO Not Empty (read) */
+#define SSSR_BSY 0x00000008 /* SSP BuSY (read) */
+#define SSSR_TFS 0x00000010 /* Transmit FIFO 1/2-full or less */
+ /* Service request (read) */
+#define SSSR_RFS 0x00000020 /* Receive FIFO 1/2-full or more */
+ /* Service request (read) */
+#define SSSR_ROR 0x00000040 /* Receive FIFO Over-Run */
+
+
+/*
+ * Operating System (OS) timer control registers
+ *
+ * Registers
+ * OSMR0 Operating System (OS) timer Match Register 0
+ * (read/write).
+ * OSMR1 Operating System (OS) timer Match Register 1
+ * (read/write).
+ * OSMR2 Operating System (OS) timer Match Register 2
+ * (read/write).
+ * OSMR3 Operating System (OS) timer Match Register 3
+ * (read/write).
+ * OSCR Operating System (OS) timer Counter Register
+ * (read/write).
+ * OSSR Operating System (OS) timer Status Register
+ * (read/write).
+ * OWER Operating System (OS) timer Watch-dog Enable Register
+ * (read/write).
+ * OIER Operating System (OS) timer Interrupt Enable Register
+ * (read/write).
+ */
+
+#define OSMR0 __REG(0x90000000) /* OS timer Match Reg. 0 */
+#define OSMR1 __REG(0x90000004) /* OS timer Match Reg. 1 */
+#define OSMR2 __REG(0x90000008) /* OS timer Match Reg. 2 */
+#define OSMR3 __REG(0x9000000c) /* OS timer Match Reg. 3 */
+#define OSCR __REG(0x90000010) /* OS timer Counter Reg. */
+#define OSSR __REG(0x90000014 ) /* OS timer Status Reg. */
+#define OWER __REG(0x90000018 ) /* OS timer Watch-dog Enable Reg. */
+#define OIER __REG(0x9000001C ) /* OS timer Interrupt Enable Reg. */
+
+#define OSSR_M(Nb) /* Match detected [0..3] */ \
+ (0x00000001 << (Nb))
+#define OSSR_M0 OSSR_M (0) /* Match detected 0 */
+#define OSSR_M1 OSSR_M (1) /* Match detected 1 */
+#define OSSR_M2 OSSR_M (2) /* Match detected 2 */
+#define OSSR_M3 OSSR_M (3) /* Match detected 3 */
+
+#define OWER_WME 0x00000001 /* Watch-dog Match Enable */
+ /* (set only) */
+
+#define OIER_E(Nb) /* match interrupt Enable [0..3] */ \
+ (0x00000001 << (Nb))
+#define OIER_E0 OIER_E (0) /* match interrupt Enable 0 */
+#define OIER_E1 OIER_E (1) /* match interrupt Enable 1 */
+#define OIER_E2 OIER_E (2) /* match interrupt Enable 2 */
+#define OIER_E3 OIER_E (3) /* match interrupt Enable 3 */
+
+
+/*
+ * Real-Time Clock (RTC) control registers
+ *
+ * Registers
+ * RTAR Real-Time Clock (RTC) Alarm Register (read/write).
+ * RCNR Real-Time Clock (RTC) CouNt Register (read/write).
+ * RTTR Real-Time Clock (RTC) Trim Register (read/write).
+ * RTSR Real-Time Clock (RTC) Status Register (read/write).
+ *
+ * Clocks
+ * frtx, Trtx Frequency, period of the real-time clock crystal
+ * (32.768 kHz nominal).
+ * frtc, Trtc Frequency, period of the real-time clock counter
+ * (1 Hz nominal).
+ */
+
+#define RTAR __REG(0x90010000) /* RTC Alarm Reg. */
+#define RCNR __REG(0x90010004) /* RTC CouNt Reg. */
+#define RTTR __REG(0x90010008) /* RTC Trim Reg. */
+#define RTSR __REG(0x90010010) /* RTC Status Reg. */
+
+#define RTTR_C Fld (16, 0) /* clock divider Count - 1 */
+#define RTTR_D Fld (10, 16) /* trim Delete count */
+ /* frtc = (1023*(C + 1) - D)*frtx/ */
+ /* (1023*(C + 1)^2) */
+ /* Trtc = (1023*(C + 1)^2)*Trtx/ */
+ /* (1023*(C + 1) - D) */
+
+#define RTSR_AL 0x00000001 /* ALarm detected */
+#define RTSR_HZ 0x00000002 /* 1 Hz clock detected */
+#define RTSR_ALE 0x00000004 /* ALarm interrupt Enable */
+#define RTSR_HZE 0x00000008 /* 1 Hz clock interrupt Enable */
+
+
+/*
+ * Power Manager (PM) control registers
+ *
+ * Registers
+ * PMCR Power Manager (PM) Control Register (read/write).
+ * PSSR Power Manager (PM) Sleep Status Register (read/write).
+ * PSPR Power Manager (PM) Scratch-Pad Register (read/write).
+ * PWER Power Manager (PM) Wake-up Enable Register
+ * (read/write).
+ * PCFR Power Manager (PM) general ConFiguration Register
+ * (read/write).
+ * PPCR Power Manager (PM) Phase-Locked Loop (PLL)
+ * Configuration Register (read/write).
+ * PGSR Power Manager (PM) General-Purpose Input/Output (GPIO)
+ * Sleep state Register (read/write, see GPIO pins).
+ * POSR Power Manager (PM) Oscillator Status Register (read).
+ *
+ * Clocks
+ * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
+ * or 3.5795 MHz).
+ * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
+ */
+
+#define PMCR __REG(0x90020000) /* PM Control Reg. */
+#define PSSR __REG(0x90020004) /* PM Sleep Status Reg. */
+#define PSPR __REG(0x90020008) /* PM Scratch-Pad Reg. */
+#define PWER __REG(0x9002000C) /* PM Wake-up Enable Reg. */
+#define PCFR __REG(0x90020010) /* PM general ConFiguration Reg. */
+#define PPCR __REG(0x90020014) /* PM PLL Configuration Reg. */
+#define PGSR __REG(0x90020018) /* PM GPIO Sleep state Reg. */
+#define POSR __REG(0x9002001C) /* PM Oscillator Status Reg. */
+
+#define PMCR_SF 0x00000001 /* Sleep Force (set only) */
+
+#define PSSR_SS 0x00000001 /* Software Sleep */
+#define PSSR_BFS 0x00000002 /* Battery Fault Status */
+ /* (BATT_FAULT) */
+#define PSSR_VFS 0x00000004 /* Vdd Fault Status (VDD_FAULT) */
+#define PSSR_DH 0x00000008 /* DRAM control Hold */
+#define PSSR_PH 0x00000010 /* Peripheral control Hold */
+
+#define PWER_GPIO(Nb) GPIO_GPIO (Nb) /* GPIO [0..27] wake-up enable */
+#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
+#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
+#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
+#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
+#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
+#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
+#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
+#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
+#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
+#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
+#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
+#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
+#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
+#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
+#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
+#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
+#define PWER_GPIO16 PWER_GPIO (16) /* GPIO [16] wake-up enable */
+#define PWER_GPIO17 PWER_GPIO (17) /* GPIO [17] wake-up enable */
+#define PWER_GPIO18 PWER_GPIO (18) /* GPIO [18] wake-up enable */
+#define PWER_GPIO19 PWER_GPIO (19) /* GPIO [19] wake-up enable */
+#define PWER_GPIO20 PWER_GPIO (20) /* GPIO [20] wake-up enable */
+#define PWER_GPIO21 PWER_GPIO (21) /* GPIO [21] wake-up enable */
+#define PWER_GPIO22 PWER_GPIO (22) /* GPIO [22] wake-up enable */
+#define PWER_GPIO23 PWER_GPIO (23) /* GPIO [23] wake-up enable */
+#define PWER_GPIO24 PWER_GPIO (24) /* GPIO [24] wake-up enable */
+#define PWER_GPIO25 PWER_GPIO (25) /* GPIO [25] wake-up enable */
+#define PWER_GPIO26 PWER_GPIO (26) /* GPIO [26] wake-up enable */
+#define PWER_GPIO27 PWER_GPIO (27) /* GPIO [27] wake-up enable */
+#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
+
+#define PCFR_OPDE 0x00000001 /* Oscillator Power-Down Enable */
+#define PCFR_ClkRun (PCFR_OPDE*0) /* Clock Running in sleep mode */
+#define PCFR_ClkStp (PCFR_OPDE*1) /* Clock Stopped in sleep mode */
+#define PCFR_FP 0x00000002 /* Float PCMCIA pins */
+#define PCFR_PCMCIANeg (PCFR_FP*0) /* PCMCIA pins Negated (1) */
+#define PCFR_PCMCIAFlt (PCFR_FP*1) /* PCMCIA pins Floating */
+#define PCFR_FS 0x00000004 /* Float Static memory pins */
+#define PCFR_StMemNeg (PCFR_FS*0) /* Static Memory pins Negated (1) */
+#define PCFR_StMemFlt (PCFR_FS*1) /* Static Memory pins Floating */
+#define PCFR_FO 0x00000008 /* Force RTC oscillator */
+ /* (32.768 kHz) enable On */
+
+#define PPCR_CCF Fld (5, 0) /* CPU core Clock (CCLK) Freq. */
+#define PPCR_Fx16 /* Freq. x 16 (fcpu = 16*fxtl) */ \
+ (0x00 << FShft (PPCR_CCF))
+#define PPCR_Fx20 /* Freq. x 20 (fcpu = 20*fxtl) */ \
+ (0x01 << FShft (PPCR_CCF))
+#define PPCR_Fx24 /* Freq. x 24 (fcpu = 24*fxtl) */ \
+ (0x02 << FShft (PPCR_CCF))
+#define PPCR_Fx28 /* Freq. x 28 (fcpu = 28*fxtl) */ \
+ (0x03 << FShft (PPCR_CCF))
+#define PPCR_Fx32 /* Freq. x 32 (fcpu = 32*fxtl) */ \
+ (0x04 << FShft (PPCR_CCF))
+#define PPCR_Fx36 /* Freq. x 36 (fcpu = 36*fxtl) */ \
+ (0x05 << FShft (PPCR_CCF))
+#define PPCR_Fx40 /* Freq. x 40 (fcpu = 40*fxtl) */ \
+ (0x06 << FShft (PPCR_CCF))
+#define PPCR_Fx44 /* Freq. x 44 (fcpu = 44*fxtl) */ \
+ (0x07 << FShft (PPCR_CCF))
+#define PPCR_Fx48 /* Freq. x 48 (fcpu = 48*fxtl) */ \
+ (0x08 << FShft (PPCR_CCF))
+#define PPCR_Fx52 /* Freq. x 52 (fcpu = 52*fxtl) */ \
+ (0x09 << FShft (PPCR_CCF))
+#define PPCR_Fx56 /* Freq. x 56 (fcpu = 56*fxtl) */ \
+ (0x0A << FShft (PPCR_CCF))
+#define PPCR_Fx60 /* Freq. x 60 (fcpu = 60*fxtl) */ \
+ (0x0B << FShft (PPCR_CCF))
+#define PPCR_Fx64 /* Freq. x 64 (fcpu = 64*fxtl) */ \
+ (0x0C << FShft (PPCR_CCF))
+#define PPCR_Fx68 /* Freq. x 68 (fcpu = 68*fxtl) */ \
+ (0x0D << FShft (PPCR_CCF))
+#define PPCR_Fx72 /* Freq. x 72 (fcpu = 72*fxtl) */ \
+ (0x0E << FShft (PPCR_CCF))
+#define PPCR_Fx76 /* Freq. x 76 (fcpu = 76*fxtl) */ \
+ (0x0F << FShft (PPCR_CCF))
+ /* 3.6864 MHz crystal (fxtl): */
+#define PPCR_F59_0MHz PPCR_Fx16 /* Freq. (fcpu) = 59.0 MHz */
+#define PPCR_F73_7MHz PPCR_Fx20 /* Freq. (fcpu) = 73.7 MHz */
+#define PPCR_F88_5MHz PPCR_Fx24 /* Freq. (fcpu) = 88.5 MHz */
+#define PPCR_F103_2MHz PPCR_Fx28 /* Freq. (fcpu) = 103.2 MHz */
+#define PPCR_F118_0MHz PPCR_Fx32 /* Freq. (fcpu) = 118.0 MHz */
+#define PPCR_F132_7MHz PPCR_Fx36 /* Freq. (fcpu) = 132.7 MHz */
+#define PPCR_F147_5MHz PPCR_Fx40 /* Freq. (fcpu) = 147.5 MHz */
+#define PPCR_F162_2MHz PPCR_Fx44 /* Freq. (fcpu) = 162.2 MHz */
+#define PPCR_F176_9MHz PPCR_Fx48 /* Freq. (fcpu) = 176.9 MHz */
+#define PPCR_F191_7MHz PPCR_Fx52 /* Freq. (fcpu) = 191.7 MHz */
+#define PPCR_F206_4MHz PPCR_Fx56 /* Freq. (fcpu) = 206.4 MHz */
+#define PPCR_F221_2MHz PPCR_Fx60 /* Freq. (fcpu) = 221.2 MHz */
+#define PPCR_F239_6MHz PPCR_Fx64 /* Freq. (fcpu) = 239.6 MHz */
+#define PPCR_F250_7MHz PPCR_Fx68 /* Freq. (fcpu) = 250.7 MHz */
+#define PPCR_F265_4MHz PPCR_Fx72 /* Freq. (fcpu) = 265.4 MHz */
+#define PPCR_F280_2MHz PPCR_Fx76 /* Freq. (fcpu) = 280.2 MHz */
+ /* 3.5795 MHz crystal (fxtl): */
+#define PPCR_F57_3MHz PPCR_Fx16 /* Freq. (fcpu) = 57.3 MHz */
+#define PPCR_F71_6MHz PPCR_Fx20 /* Freq. (fcpu) = 71.6 MHz */
+#define PPCR_F85_9MHz PPCR_Fx24 /* Freq. (fcpu) = 85.9 MHz */
+#define PPCR_F100_2MHz PPCR_Fx28 /* Freq. (fcpu) = 100.2 MHz */
+#define PPCR_F114_5MHz PPCR_Fx32 /* Freq. (fcpu) = 114.5 MHz */
+#define PPCR_F128_9MHz PPCR_Fx36 /* Freq. (fcpu) = 128.9 MHz */
+#define PPCR_F143_2MHz PPCR_Fx40 /* Freq. (fcpu) = 143.2 MHz */
+#define PPCR_F157_5MHz PPCR_Fx44 /* Freq. (fcpu) = 157.5 MHz */
+#define PPCR_F171_8MHz PPCR_Fx48 /* Freq. (fcpu) = 171.8 MHz */
+#define PPCR_F186_1MHz PPCR_Fx52 /* Freq. (fcpu) = 186.1 MHz */
+#define PPCR_F200_5MHz PPCR_Fx56 /* Freq. (fcpu) = 200.5 MHz */
+#define PPCR_F214_8MHz PPCR_Fx60 /* Freq. (fcpu) = 214.8 MHz */
+#define PPCR_F229_1MHz PPCR_Fx64 /* Freq. (fcpu) = 229.1 MHz */
+#define PPCR_F243_4MHz PPCR_Fx68 /* Freq. (fcpu) = 243.4 MHz */
+#define PPCR_F257_7MHz PPCR_Fx72 /* Freq. (fcpu) = 257.7 MHz */
+#define PPCR_F272_0MHz PPCR_Fx76 /* Freq. (fcpu) = 272.0 MHz */
+
+#define POSR_OOK 0x00000001 /* RTC Oscillator (32.768 kHz) OK */
+
+
+/*
+ * Reset Controller (RC) control registers
+ *
+ * Registers
+ * RSRR Reset Controller (RC) Software Reset Register
+ * (read/write).
+ * RCSR Reset Controller (RC) Status Register (read/write).
+ */
+
+#define RSRR __REG(0x90030000) /* RC Software Reset Reg. */
+#define RCSR __REG(0x90030004) /* RC Status Reg. */
+
+#define RSRR_SWR 0x00000001 /* SoftWare Reset (set only) */
+
+#define RCSR_HWR 0x00000001 /* HardWare Reset */
+#define RCSR_SWR 0x00000002 /* SoftWare Reset */
+#define RCSR_WDR 0x00000004 /* Watch-Dog Reset */
+#define RCSR_SMR 0x00000008 /* Sleep-Mode Reset */
+
+
+/*
+ * Test unit control registers
+ *
+ * Registers
+ * TUCR Test Unit Control Register (read/write).
+ */
+
+#define TUCR __REG(0x90030008) /* Test Unit Control Reg. */
+
+#define TUCR_TIC 0x00000040 /* TIC mode */
+#define TUCR_TTST 0x00000080 /* Trim TeST mode */
+#define TUCR_RCRC 0x00000100 /* Richard's Cyclic Redundancy */
+ /* Check */
+#define TUCR_PMD 0x00000200 /* Power Management Disable */
+#define TUCR_MR 0x00000400 /* Memory Request mode */
+#define TUCR_NoMB (TUCR_MR*0) /* No Memory Bus request & grant */
+#define TUCR_MBGPIO (TUCR_MR*1) /* Memory Bus request (MBREQ) & */
+ /* grant (MBGNT) on GPIO [22:21] */
+#define TUCR_CTB Fld (3, 20) /* Clock Test Bits */
+#define TUCR_FDC 0x00800000 /* RTC Force Delete Count */
+#define TUCR_FMC 0x01000000 /* Force Michelle's Control mode */
+#define TUCR_TMC 0x02000000 /* RTC Trimmer Multiplexer Control */
+#define TUCR_DPS 0x04000000 /* Disallow Pad Sleep */
+#define TUCR_TSEL Fld (3, 29) /* clock Test SELect on GPIO [27] */
+#define TUCR_32_768kHz /* 32.768 kHz osc. on GPIO [27] */ \
+ (0 << FShft (TUCR_TSEL))
+#define TUCR_3_6864MHz /* 3.6864 MHz osc. on GPIO [27] */ \
+ (1 << FShft (TUCR_TSEL))
+#define TUCR_VDD /* VDD ring osc./16 on GPIO [27] */ \
+ (2 << FShft (TUCR_TSEL))
+#define TUCR_96MHzPLL /* 96 MHz PLL/4 on GPIO [27] */ \
+ (3 << FShft (TUCR_TSEL))
+#define TUCR_Clock /* internal (fcpu/2) & 32.768 kHz */ \
+ /* Clocks on GPIO [26:27] */ \
+ (4 << FShft (TUCR_TSEL))
+#define TUCR_3_6864MHzA /* 3.6864 MHz osc. on GPIO [27] */ \
+ /* (Alternative) */ \
+ (5 << FShft (TUCR_TSEL))
+#define TUCR_MainPLL /* Main PLL/16 on GPIO [27] */ \
+ (6 << FShft (TUCR_TSEL))
+#define TUCR_VDDL /* VDDL ring osc./4 on GPIO [27] */ \
+ (7 << FShft (TUCR_TSEL))
+
+
+/*
+ * General-Purpose Input/Output (GPIO) control registers
+ *
+ * Registers
+ * GPLR General-Purpose Input/Output (GPIO) Pin Level
+ * Register (read).
+ * GPDR General-Purpose Input/Output (GPIO) Pin Direction
+ * Register (read/write).
+ * GPSR General-Purpose Input/Output (GPIO) Pin output Set
+ * Register (write).
+ * GPCR General-Purpose Input/Output (GPIO) Pin output Clear
+ * Register (write).
+ * GRER General-Purpose Input/Output (GPIO) Rising-Edge
+ * detect Register (read/write).
+ * GFER General-Purpose Input/Output (GPIO) Falling-Edge
+ * detect Register (read/write).
+ * GEDR General-Purpose Input/Output (GPIO) Edge Detect
+ * status Register (read/write).
+ * GAFR General-Purpose Input/Output (GPIO) Alternate
+ * Function Register (read/write).
+ *
+ * Clock
+ * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
+ */
+
+#define GPLR __REG(0x90040000) /* GPIO Pin Level Reg. */
+#define GPDR __REG(0x90040004) /* GPIO Pin Direction Reg. */
+#define GPSR __REG(0x90040008) /* GPIO Pin output Set Reg. */
+#define GPCR __REG(0x9004000C) /* GPIO Pin output Clear Reg. */
+#define GRER __REG(0x90040010) /* GPIO Rising-Edge detect Reg. */
+#define GFER __REG(0x90040014) /* GPIO Falling-Edge detect Reg. */
+#define GEDR __REG(0x90040018) /* GPIO Edge Detect status Reg. */
+#define GAFR __REG(0x9004001C) /* GPIO Alternate Function Reg. */
+
+#define GPIO_MIN (0)
+#define GPIO_MAX (27)
+
+#define GPIO_GPIO(Nb) /* GPIO [0..27] */ \
+ (0x00000001 << (Nb))
+#define GPIO_GPIO0 GPIO_GPIO (0) /* GPIO [0] */
+#define GPIO_GPIO1 GPIO_GPIO (1) /* GPIO [1] */
+#define GPIO_GPIO2 GPIO_GPIO (2) /* GPIO [2] */
+#define GPIO_GPIO3 GPIO_GPIO (3) /* GPIO [3] */
+#define GPIO_GPIO4 GPIO_GPIO (4) /* GPIO [4] */
+#define GPIO_GPIO5 GPIO_GPIO (5) /* GPIO [5] */
+#define GPIO_GPIO6 GPIO_GPIO (6) /* GPIO [6] */
+#define GPIO_GPIO7 GPIO_GPIO (7) /* GPIO [7] */
+#define GPIO_GPIO8 GPIO_GPIO (8) /* GPIO [8] */
+#define GPIO_GPIO9 GPIO_GPIO (9) /* GPIO [9] */
+#define GPIO_GPIO10 GPIO_GPIO (10) /* GPIO [10] */
+#define GPIO_GPIO11 GPIO_GPIO (11) /* GPIO [11] */
+#define GPIO_GPIO12 GPIO_GPIO (12) /* GPIO [12] */
+#define GPIO_GPIO13 GPIO_GPIO (13) /* GPIO [13] */
+#define GPIO_GPIO14 GPIO_GPIO (14) /* GPIO [14] */
+#define GPIO_GPIO15 GPIO_GPIO (15) /* GPIO [15] */
+#define GPIO_GPIO16 GPIO_GPIO (16) /* GPIO [16] */
+#define GPIO_GPIO17 GPIO_GPIO (17) /* GPIO [17] */
+#define GPIO_GPIO18 GPIO_GPIO (18) /* GPIO [18] */
+#define GPIO_GPIO19 GPIO_GPIO (19) /* GPIO [19] */
+#define GPIO_GPIO20 GPIO_GPIO (20) /* GPIO [20] */
+#define GPIO_GPIO21 GPIO_GPIO (21) /* GPIO [21] */
+#define GPIO_GPIO22 GPIO_GPIO (22) /* GPIO [22] */
+#define GPIO_GPIO23 GPIO_GPIO (23) /* GPIO [23] */
+#define GPIO_GPIO24 GPIO_GPIO (24) /* GPIO [24] */
+#define GPIO_GPIO25 GPIO_GPIO (25) /* GPIO [25] */
+#define GPIO_GPIO26 GPIO_GPIO (26) /* GPIO [26] */
+#define GPIO_GPIO27 GPIO_GPIO (27) /* GPIO [27] */
+
+#define GPIO_LDD(Nb) /* LCD Data [8..15] (O) */ \
+ GPIO_GPIO ((Nb) - 6)
+#define GPIO_LDD8 GPIO_LDD (8) /* LCD Data [8] (O) */
+#define GPIO_LDD9 GPIO_LDD (9) /* LCD Data [9] (O) */
+#define GPIO_LDD10 GPIO_LDD (10) /* LCD Data [10] (O) */
+#define GPIO_LDD11 GPIO_LDD (11) /* LCD Data [11] (O) */
+#define GPIO_LDD12 GPIO_LDD (12) /* LCD Data [12] (O) */
+#define GPIO_LDD13 GPIO_LDD (13) /* LCD Data [13] (O) */
+#define GPIO_LDD14 GPIO_LDD (14) /* LCD Data [14] (O) */
+#define GPIO_LDD15 GPIO_LDD (15) /* LCD Data [15] (O) */
+ /* ser. port 4: */
+#define GPIO_SSP_TXD GPIO_GPIO (10) /* SSP Transmit Data (O) */
+#define GPIO_SSP_RXD GPIO_GPIO (11) /* SSP Receive Data (I) */
+#define GPIO_SSP_SCLK GPIO_GPIO (12) /* SSP Sample CLocK (O) */
+#define GPIO_SSP_SFRM GPIO_GPIO (13) /* SSP Sample FRaMe (O) */
+ /* ser. port 1: */
+#define GPIO_UART_TXD GPIO_GPIO (14) /* UART Transmit Data (O) */
+#define GPIO_UART_RXD GPIO_GPIO (15) /* UART Receive Data (I) */
+#define GPIO_SDLC_SCLK GPIO_GPIO (16) /* SDLC Sample CLocK (I/O) */
+#define GPIO_SDLC_AAF GPIO_GPIO (17) /* SDLC Abort After Frame (O) */
+#define GPIO_UART_SCLK1 GPIO_GPIO (18) /* UART Sample CLocK 1 (I) */
+ /* ser. port 4: */
+#define GPIO_SSP_CLK GPIO_GPIO (19) /* SSP external CLocK (I) */
+ /* ser. port 3: */
+#define GPIO_UART_SCLK3 GPIO_GPIO (20) /* UART Sample CLocK 3 (I) */
+ /* ser. port 4: */
+#define GPIO_MCP_CLK GPIO_GPIO (21) /* MCP CLocK (I) */
+ /* test controller: */
+#define GPIO_TIC_ACK GPIO_GPIO (21) /* TIC ACKnowledge (O) */
+#define GPIO_MBGNT GPIO_GPIO (21) /* Memory Bus GraNT (O) */
+#define GPIO_TREQA GPIO_GPIO (22) /* TIC REQuest A (I) */
+#define GPIO_MBREQ GPIO_GPIO (22) /* Memory Bus REQuest (I) */
+#define GPIO_TREQB GPIO_GPIO (23) /* TIC REQuest B (I) */
+#define GPIO_1Hz GPIO_GPIO (25) /* 1 Hz clock (O) */
+#define GPIO_RCLK GPIO_GPIO (26) /* internal (R) CLocK (O, fcpu/2) */
+#define GPIO_32_768kHz GPIO_GPIO (27) /* 32.768 kHz clock (O, RTC) */
+
+#define GPDR_In 0 /* Input */
+#define GPDR_Out 1 /* Output */
+
+
+/*
+ * Interrupt Controller (IC) control registers
+ *
+ * Registers
+ * ICIP Interrupt Controller (IC) Interrupt ReQuest (IRQ)
+ * Pending register (read).
+ * ICMR Interrupt Controller (IC) Mask Register (read/write).
+ * ICLR Interrupt Controller (IC) Level Register (read/write).
+ * ICCR Interrupt Controller (IC) Control Register
+ * (read/write).
+ * [The ICCR register is only implemented in versions 2.0
+ * (rev. = 8) and higher of the StrongARM SA-1100.]
+ * ICFP Interrupt Controller (IC) Fast Interrupt reQuest
+ * (FIQ) Pending register (read).
+ * ICPR Interrupt Controller (IC) Pending Register (read).
+ * [The ICPR register is active low (inverted) in
+ * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ * StrongARM SA-1100, it is active high (non-inverted) in
+ * versions 2.0 (rev. = 8) and higher.]
+ */
+
+#define ICIP __REG(0x90050000) /* IC IRQ Pending reg. */
+#define ICMR __REG(0x90050004) /* IC Mask Reg. */
+#define ICLR __REG(0x90050008) /* IC Level Reg. */
+#define ICCR __REG(0x9005000C) /* IC Control Reg. */
+#define ICFP __REG(0x90050010) /* IC FIQ Pending reg. */
+#define ICPR __REG(0x90050020) /* IC Pending Reg. */
+
+#define IC_GPIO(Nb) /* GPIO [0..10] */ \
+ (0x00000001 << (Nb))
+#define IC_GPIO0 IC_GPIO (0) /* GPIO [0] */
+#define IC_GPIO1 IC_GPIO (1) /* GPIO [1] */
+#define IC_GPIO2 IC_GPIO (2) /* GPIO [2] */
+#define IC_GPIO3 IC_GPIO (3) /* GPIO [3] */
+#define IC_GPIO4 IC_GPIO (4) /* GPIO [4] */
+#define IC_GPIO5 IC_GPIO (5) /* GPIO [5] */
+#define IC_GPIO6 IC_GPIO (6) /* GPIO [6] */
+#define IC_GPIO7 IC_GPIO (7) /* GPIO [7] */
+#define IC_GPIO8 IC_GPIO (8) /* GPIO [8] */
+#define IC_GPIO9 IC_GPIO (9) /* GPIO [9] */
+#define IC_GPIO10 IC_GPIO (10) /* GPIO [10] */
+#define IC_GPIO11_27 0x00000800 /* GPIO [11:27] (ORed) */
+#define IC_LCD 0x00001000 /* LCD controller */
+#define IC_Ser0UDC 0x00002000 /* Ser. port 0 UDC */
+#define IC_Ser1SDLC 0x00004000 /* Ser. port 1 SDLC */
+#define IC_Ser1UART 0x00008000 /* Ser. port 1 UART */
+#define IC_Ser2ICP 0x00010000 /* Ser. port 2 ICP */
+#define IC_Ser3UART 0x00020000 /* Ser. port 3 UART */
+#define IC_Ser4MCP 0x00040000 /* Ser. port 4 MCP */
+#define IC_Ser4SSP 0x00080000 /* Ser. port 4 SSP */
+#define IC_DMA(Nb) /* DMA controller channel [0..5] */ \
+ (0x00100000 << (Nb))
+#define IC_DMA0 IC_DMA (0) /* DMA controller channel 0 */
+#define IC_DMA1 IC_DMA (1) /* DMA controller channel 1 */
+#define IC_DMA2 IC_DMA (2) /* DMA controller channel 2 */
+#define IC_DMA3 IC_DMA (3) /* DMA controller channel 3 */
+#define IC_DMA4 IC_DMA (4) /* DMA controller channel 4 */
+#define IC_DMA5 IC_DMA (5) /* DMA controller channel 5 */
+#define IC_OST(Nb) /* OS Timer match [0..3] */ \
+ (0x04000000 << (Nb))
+#define IC_OST0 IC_OST (0) /* OS Timer match 0 */
+#define IC_OST1 IC_OST (1) /* OS Timer match 1 */
+#define IC_OST2 IC_OST (2) /* OS Timer match 2 */
+#define IC_OST3 IC_OST (3) /* OS Timer match 3 */
+#define IC_RTC1Hz 0x40000000 /* RTC 1 Hz clock */
+#define IC_RTCAlrm 0x80000000 /* RTC Alarm */
+
+#define ICLR_IRQ 0 /* Interrupt ReQuest */
+#define ICLR_FIQ 1 /* Fast Interrupt reQuest */
+
+#define ICCR_DIM 0x00000001 /* Disable Idle-mode interrupt */
+ /* Mask */
+#define ICCR_IdleAllInt (ICCR_DIM*0) /* Idle-mode All Interrupt enable */
+ /* (ICMR ignored) */
+#define ICCR_IdleMskInt (ICCR_DIM*1) /* Idle-mode non-Masked Interrupt */
+ /* enable (ICMR used) */
+
+
+/*
+ * Peripheral Pin Controller (PPC) control registers
+ *
+ * Registers
+ * PPDR Peripheral Pin Controller (PPC) Pin Direction
+ * Register (read/write).
+ * PPSR Peripheral Pin Controller (PPC) Pin State Register
+ * (read/write).
+ * PPAR Peripheral Pin Controller (PPC) Pin Assignment
+ * Register (read/write).
+ * PSDR Peripheral Pin Controller (PPC) Sleep-mode pin
+ * Direction Register (read/write).
+ * PPFR Peripheral Pin Controller (PPC) Pin Flag Register
+ * (read).
+ */
+
+#define PPDR __REG(0x90060000) /* PPC Pin Direction Reg. */
+#define PPSR __REG(0x90060004) /* PPC Pin State Reg. */
+#define PPAR __REG(0x90060008) /* PPC Pin Assignment Reg. */
+#define PSDR __REG(0x9006000C) /* PPC Sleep-mode pin Direction Reg. */
+#define PPFR __REG(0x90060010) /* PPC Pin Flag Reg. */
+
+#define PPC_LDD(Nb) /* LCD Data [0..7] */ \
+ (0x00000001 << (Nb))
+#define PPC_LDD0 PPC_LDD (0) /* LCD Data [0] */
+#define PPC_LDD1 PPC_LDD (1) /* LCD Data [1] */
+#define PPC_LDD2 PPC_LDD (2) /* LCD Data [2] */
+#define PPC_LDD3 PPC_LDD (3) /* LCD Data [3] */
+#define PPC_LDD4 PPC_LDD (4) /* LCD Data [4] */
+#define PPC_LDD5 PPC_LDD (5) /* LCD Data [5] */
+#define PPC_LDD6 PPC_LDD (6) /* LCD Data [6] */
+#define PPC_LDD7 PPC_LDD (7) /* LCD Data [7] */
+#define PPC_L_PCLK 0x00000100 /* LCD Pixel CLocK */
+#define PPC_L_LCLK 0x00000200 /* LCD Line CLocK */
+#define PPC_L_FCLK 0x00000400 /* LCD Frame CLocK */
+#define PPC_L_BIAS 0x00000800 /* LCD AC BIAS */
+ /* ser. port 1: */
+#define PPC_TXD1 0x00001000 /* SDLC/UART Transmit Data 1 */
+#define PPC_RXD1 0x00002000 /* SDLC/UART Receive Data 1 */
+ /* ser. port 2: */
+#define PPC_TXD2 0x00004000 /* IPC Transmit Data 2 */
+#define PPC_RXD2 0x00008000 /* IPC Receive Data 2 */
+ /* ser. port 3: */
+#define PPC_TXD3 0x00010000 /* UART Transmit Data 3 */
+#define PPC_RXD3 0x00020000 /* UART Receive Data 3 */
+ /* ser. port 4: */
+#define PPC_TXD4 0x00040000 /* MCP/SSP Transmit Data 4 */
+#define PPC_RXD4 0x00080000 /* MCP/SSP Receive Data 4 */
+#define PPC_SCLK 0x00100000 /* MCP/SSP Sample CLocK */
+#define PPC_SFRM 0x00200000 /* MCP/SSP Sample FRaMe */
+
+#define PPDR_In 0 /* Input */
+#define PPDR_Out 1 /* Output */
+
+ /* ser. port 1: */
+#define PPAR_UPR 0x00001000 /* UART Pin Reassignment */
+#define PPAR_UARTTR (PPAR_UPR*0) /* UART on TXD_1 & RXD_1 */
+#define PPAR_UARTGPIO (PPAR_UPR*1) /* UART on GPIO [14:15] */
+ /* ser. port 4: */
+#define PPAR_SPR 0x00040000 /* SSP Pin Reassignment */
+#define PPAR_SSPTRSS (PPAR_SPR*0) /* SSP on TXD_C, RXD_C, SCLK_C, */
+ /* & SFRM_C */
+#define PPAR_SSPGPIO (PPAR_SPR*1) /* SSP on GPIO [10:13] */
+
+#define PSDR_OutL 0 /* Output Low in sleep mode */
+#define PSDR_Flt 1 /* Floating (input) in sleep mode */
+
+#define PPFR_LCD 0x00000001 /* LCD controller */
+#define PPFR_SP1TX 0x00001000 /* Ser. Port 1 SDLC/UART Transmit */
+#define PPFR_SP1RX 0x00002000 /* Ser. Port 1 SDLC/UART Receive */
+#define PPFR_SP2TX 0x00004000 /* Ser. Port 2 ICP Transmit */
+#define PPFR_SP2RX 0x00008000 /* Ser. Port 2 ICP Receive */
+#define PPFR_SP3TX 0x00010000 /* Ser. Port 3 UART Transmit */
+#define PPFR_SP3RX 0x00020000 /* Ser. Port 3 UART Receive */
+#define PPFR_SP4 0x00040000 /* Ser. Port 4 MCP/SSP */
+#define PPFR_PerEn 0 /* Peripheral Enabled */
+#define PPFR_PPCEn 1 /* PPC Enabled */
+
+
+/*
+ * Dynamic Random-Access Memory (DRAM) control registers
+ *
+ * Registers
+ * MDCNFG Memory system: Dynamic Random-Access Memory (DRAM)
+ * CoNFiGuration register (read/write).
+ * MDCAS0 Memory system: Dynamic Random-Access Memory (DRAM)
+ * Column Address Strobe (CAS) shift register 0
+ * (read/write).
+ * MDCAS1 Memory system: Dynamic Random-Access Memory (DRAM)
+ * Column Address Strobe (CAS) shift register 1
+ * (read/write).
+ * MDCAS2 Memory system: Dynamic Random-Access Memory (DRAM)
+ * Column Address Strobe (CAS) shift register 2
+ * (read/write).
+ *
+ * Clocks
+ * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
+ * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
+ * fcas, Tcas Frequency, period of the DRAM CAS shift registers.
+ */
+
+#define MDCNFG __REG(0xA0000000) /* DRAM CoNFiGuration reg. */
+#define MDCAS0 __REG(0xA0000004) /* DRAM CAS shift reg. 0 */
+#define MDCAS1 __REG(0xA0000008) /* DRAM CAS shift reg. 1 */
+#define MDCAS2 __REG(0xA000000c) /* DRAM CAS shift reg. 2 */
+
+/* SA1100 MDCNFG values */
+#define MDCNFG_DE(Nb) /* DRAM Enable bank [0..3] */ \
+ (0x00000001 << (Nb))
+#define MDCNFG_DE0 MDCNFG_DE (0) /* DRAM Enable bank 0 */
+#define MDCNFG_DE1 MDCNFG_DE (1) /* DRAM Enable bank 1 */
+#define MDCNFG_DE2 MDCNFG_DE (2) /* DRAM Enable bank 2 */
+#define MDCNFG_DE3 MDCNFG_DE (3) /* DRAM Enable bank 3 */
+#define MDCNFG_DRAC Fld (2, 4) /* DRAM Row Address Count - 9 */
+#define MDCNFG_RowAdd(Add) /* Row Address count [9..12] */ \
+ (((Add) - 9) << FShft (MDCNFG_DRAC))
+#define MDCNFG_CDB2 0x00000040 /* shift reg. Clock Divide By 2 */
+ /* (fcas = fcpu/2) */
+#define MDCNFG_TRP Fld (4, 7) /* Time RAS Pre-charge - 1 [Tmem] */
+#define MDCNFG_PrChrg(Tcpu) /* Pre-Charge time [2..32 Tcpu] */ \
+ (((Tcpu) - 2)/2 << FShft (MDCNFG_TRP))
+#define MDCNFG_CeilPrChrg(Tcpu) /* Ceil. of PrChrg [2..32 Tcpu] */ \
+ (((Tcpu) - 1)/2 << FShft (MDCNFG_TRP))
+#define MDCNFG_TRASR Fld (4, 11) /* Time RAS Refresh - 1 [Tmem] */
+#define MDCNFG_Ref(Tcpu) /* Refresh time [2..32 Tcpu] */ \
+ (((Tcpu) - 2)/2 << FShft (MDCNFG_TRASR))
+#define MDCNFG_CeilRef(Tcpu) /* Ceil. of Ref [2..32 Tcpu] */ \
+ (((Tcpu) - 1)/2 << FShft (MDCNFG_TRASR))
+#define MDCNFG_TDL Fld (2, 15) /* Time Data Latch [Tcpu] */
+#define MDCNFG_DataLtch(Tcpu) /* Data Latch delay [0..3 Tcpu] */ \
+ ((Tcpu) << FShft (MDCNFG_TDL))
+#define MDCNFG_DRI Fld (15, 17) /* min. DRAM Refresh Interval/4 */
+ /* [Tmem] */
+#define MDCNFG_RefInt(Tcpu) /* min. Refresh Interval */ \
+ /* [0..262136 Tcpu] */ \
+ ((Tcpu)/8 << FShft (MDCNFG_DRI))
+
+/* SA1110 MDCNFG values */
+#define MDCNFG_SA1110_DE0 0x00000001 /* DRAM Enable bank 0 */
+#define MDCNFG_SA1110_DE1 0x00000002 /* DRAM Enable bank 1 */
+#define MDCNFG_SA1110_DTIM0 0x00000004 /* DRAM timing type 0/1 */
+#define MDCNFG_SA1110_DWID0 0x00000008 /* DRAM bus width 0/1 */
+#define MDCNFG_SA1110_DRAC0 Fld(3, 4) /* DRAM row addr bit count */
+ /* bank 0/1 */
+#define MDCNFG_SA1110_CDB20 0x00000080 /* Mem Clock divide by 2 0/1 */
+#define MDCNFG_SA1110_TRP0 Fld(3, 8) /* RAS precharge 0/1 */
+#define MDCNFG_SA1110_TDL0 Fld(2, 12) /* Data input latch after CAS*/
+ /* deassertion 0/1 */
+#define MDCNFG_SA1110_TWR0 Fld(2, 14) /* SDRAM write recovery 0/1 */
+#define MDCNFG_SA1110_DE2 0x00010000 /* DRAM Enable bank 0 */
+#define MDCNFG_SA1110_DE3 0x00020000 /* DRAM Enable bank 1 */
+#define MDCNFG_SA1110_DTIM2 0x00040000 /* DRAM timing type 0/1 */
+#define MDCNFG_SA1110_DWID2 0x00080000 /* DRAM bus width 0/1 */
+#define MDCNFG_SA1110_DRAC2 Fld(3, 20) /* DRAM row addr bit count */
+ /* bank 0/1 */
+#define MDCNFG_SA1110_CDB22 0x00800000 /* Mem Clock divide by 2 0/1 */
+#define MDCNFG_SA1110_TRP2 Fld(3, 24) /* RAS precharge 0/1 */
+#define MDCNFG_SA1110_TDL2 Fld(2, 28) /* Data input latch after CAS*/
+ /* deassertion 0/1 */
+#define MDCNFG_SA1110_TWR2 Fld(2, 30) /* SDRAM write recovery 0/1 */
+
+
+/*
+ * Static memory control registers
+ *
+ * Registers
+ * MSC0 Memory system: Static memory Control register 0
+ * (read/write).
+ * MSC1 Memory system: Static memory Control register 1
+ * (read/write).
+ *
+ * Clocks
+ * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
+ * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
+ */
+
+#define MSC0 __REG(0xa0000010) /* Static memory Control reg. 0 */
+#define MSC1 __REG(0xa0000014) /* Static memory Control reg. 1 */
+#define MSC2 __REG(0xa000002c) /* Static memory Control reg. 2, not contiguous */
+
+#define MSC_Bnk(Nb) /* static memory Bank [0..3] */ \
+ Fld (16, ((Nb) Modulo 2)*16)
+#define MSC0_Bnk0 MSC_Bnk (0) /* static memory Bank 0 */
+#define MSC0_Bnk1 MSC_Bnk (1) /* static memory Bank 1 */
+#define MSC1_Bnk2 MSC_Bnk (2) /* static memory Bank 2 */
+#define MSC1_Bnk3 MSC_Bnk (3) /* static memory Bank 3 */
+
+#define MSC_RT Fld (2, 0) /* ROM/static memory Type */
+#define MSC_NonBrst /* Non-Burst static memory */ \
+ (0 << FShft (MSC_RT))
+#define MSC_SRAM /* 32-bit byte-writable SRAM */ \
+ (1 << FShft (MSC_RT))
+#define MSC_Brst4 /* Burst-of-4 static memory */ \
+ (2 << FShft (MSC_RT))
+#define MSC_Brst8 /* Burst-of-8 static memory */ \
+ (3 << FShft (MSC_RT))
+#define MSC_RBW 0x0004 /* ROM/static memory Bus Width */
+#define MSC_32BitStMem (MSC_RBW*0) /* 32-Bit Static Memory */
+#define MSC_16BitStMem (MSC_RBW*1) /* 16-Bit Static Memory */
+#define MSC_RDF Fld (5, 3) /* ROM/static memory read Delay */
+ /* First access - 1(.5) [Tmem] */
+#define MSC_1stRdAcc(Tcpu) /* 1st Read Access time (burst */ \
+ /* static memory) [3..65 Tcpu] */ \
+ ((((Tcpu) - 3)/2) << FShft (MSC_RDF))
+#define MSC_Ceil1stRdAcc(Tcpu) /* Ceil. of 1stRdAcc [3..65 Tcpu] */ \
+ ((((Tcpu) - 2)/2) << FShft (MSC_RDF))
+#define MSC_RdAcc(Tcpu) /* Read Access time (non-burst */ \
+ /* static memory) [2..64 Tcpu] */ \
+ ((((Tcpu) - 2)/2) << FShft (MSC_RDF))
+#define MSC_CeilRdAcc(Tcpu) /* Ceil. of RdAcc [2..64 Tcpu] */ \
+ ((((Tcpu) - 1)/2) << FShft (MSC_RDF))
+#define MSC_RDN Fld (5, 8) /* ROM/static memory read Delay */
+ /* Next access - 1 [Tmem] */
+#define MSC_NxtRdAcc(Tcpu) /* Next Read Access time (burst */ \
+ /* static memory) [2..64 Tcpu] */ \
+ ((((Tcpu) - 2)/2) << FShft (MSC_RDN))
+#define MSC_CeilNxtRdAcc(Tcpu) /* Ceil. of NxtRdAcc [2..64 Tcpu] */ \
+ ((((Tcpu) - 1)/2) << FShft (MSC_RDN))
+#define MSC_WrAcc(Tcpu) /* Write Access time (non-burst */ \
+ /* static memory) [2..64 Tcpu] */ \
+ ((((Tcpu) - 2)/2) << FShft (MSC_RDN))
+#define MSC_CeilWrAcc(Tcpu) /* Ceil. of WrAcc [2..64 Tcpu] */ \
+ ((((Tcpu) - 1)/2) << FShft (MSC_RDN))
+#define MSC_RRR Fld (3, 13) /* ROM/static memory RecoveRy */
+ /* time/2 [Tmem] */
+#define MSC_Rec(Tcpu) /* Recovery time [0..28 Tcpu] */ \
+ (((Tcpu)/4) << FShft (MSC_RRR))
+#define MSC_CeilRec(Tcpu) /* Ceil. of Rec [0..28 Tcpu] */ \
+ ((((Tcpu) + 3)/4) << FShft (MSC_RRR))
+
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) control
+ * register
+ *
+ * Register
+ * MECR Memory system: Expansion memory bus (PCMCIA)
+ * Configuration Register (read/write).
+ *
+ * Clocks
+ * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
+ * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
+ * fbclk, Tbclk Frequency, period of the PCMCIA clock (BCLK).
+ */
+
+ /* Memory system: */
+#define MECR __REG(0xA0000018) /* Expansion memory bus (PCMCIA) Configuration Reg. */
+
+#define MECR_PCMCIA(Nb) /* PCMCIA [0..1] */ \
+ Fld (15, (Nb)*16)
+#define MECR_PCMCIA0 MECR_PCMCIA (0) /* PCMCIA 0 */
+#define MECR_PCMCIA1 MECR_PCMCIA (1) /* PCMCIA 1 */
+
+#define MECR_BSIO Fld (5, 0) /* BCLK Select I/O - 1 [Tmem] */
+#define MECR_IOClk(Tcpu) /* I/O Clock [2..64 Tcpu] */ \
+ ((((Tcpu) - 2)/2) << FShft (MECR_BSIO))
+#define MECR_CeilIOClk(Tcpu) /* Ceil. of IOClk [2..64 Tcpu] */ \
+ ((((Tcpu) - 1)/2) << FShft (MECR_BSIO))
+#define MECR_BSA Fld (5, 5) /* BCLK Select Attribute - 1 */
+ /* [Tmem] */
+#define MECR_AttrClk(Tcpu) /* Attribute Clock [2..64 Tcpu] */ \
+ ((((Tcpu) - 2)/2) << FShft (MECR_BSA))
+#define MECR_CeilAttrClk(Tcpu) /* Ceil. of AttrClk [2..64 Tcpu] */ \
+ ((((Tcpu) - 1)/2) << FShft (MECR_BSA))
+#define MECR_BSM Fld (5, 10) /* BCLK Select Memory - 1 [Tmem] */
+#define MECR_MemClk(Tcpu) /* Memory Clock [2..64 Tcpu] */ \
+ ((((Tcpu) - 2)/2) << FShft (MECR_BSM))
+#define MECR_CeilMemClk(Tcpu) /* Ceil. of MemClk [2..64 Tcpu] */ \
+ ((((Tcpu) - 1)/2) << FShft (MECR_BSM))
+
+/*
+ * On SA1110 only
+ */
+
+#define MDREFR __REG(0xA000001C)
+
+#define MDREFR_TRASR Fld (4, 0)
+#define MDREFR_DRI Fld (12, 4)
+#define MDREFR_E0PIN (1 << 16)
+#define MDREFR_K0RUN (1 << 17)
+#define MDREFR_K0DB2 (1 << 18)
+#define MDREFR_E1PIN (1 << 20)
+#define MDREFR_K1RUN (1 << 21)
+#define MDREFR_K1DB2 (1 << 22)
+#define MDREFR_K2RUN (1 << 25)
+#define MDREFR_K2DB2 (1 << 26)
+#define MDREFR_EAPD (1 << 28)
+#define MDREFR_KAPD (1 << 29)
+#define MDREFR_SLFRSH (1 << 31)
+
+
+/*
+ * Direct Memory Access (DMA) control registers
+ *
+ * Registers
+ * DDAR0 Direct Memory Access (DMA) Device Address Register
+ * channel 0 (read/write).
+ * DCSR0 Direct Memory Access (DMA) Control and Status
+ * Register channel 0 (read/write).
+ * DBSA0 Direct Memory Access (DMA) Buffer Start address
+ * register A channel 0 (read/write).
+ * DBTA0 Direct Memory Access (DMA) Buffer Transfer count
+ * register A channel 0 (read/write).
+ * DBSB0 Direct Memory Access (DMA) Buffer Start address
+ * register B channel 0 (read/write).
+ * DBTB0 Direct Memory Access (DMA) Buffer Transfer count
+ * register B channel 0 (read/write).
+ *
+ * DDAR1 Direct Memory Access (DMA) Device Address Register
+ * channel 1 (read/write).
+ * DCSR1 Direct Memory Access (DMA) Control and Status
+ * Register channel 1 (read/write).
+ * DBSA1 Direct Memory Access (DMA) Buffer Start address
+ * register A channel 1 (read/write).
+ * DBTA1 Direct Memory Access (DMA) Buffer Transfer count
+ * register A channel 1 (read/write).
+ * DBSB1 Direct Memory Access (DMA) Buffer Start address
+ * register B channel 1 (read/write).
+ * DBTB1 Direct Memory Access (DMA) Buffer Transfer count
+ * register B channel 1 (read/write).
+ *
+ * DDAR2 Direct Memory Access (DMA) Device Address Register
+ * channel 2 (read/write).
+ * DCSR2 Direct Memory Access (DMA) Control and Status
+ * Register channel 2 (read/write).
+ * DBSA2 Direct Memory Access (DMA) Buffer Start address
+ * register A channel 2 (read/write).
+ * DBTA2 Direct Memory Access (DMA) Buffer Transfer count
+ * register A channel 2 (read/write).
+ * DBSB2 Direct Memory Access (DMA) Buffer Start address
+ * register B channel 2 (read/write).
+ * DBTB2 Direct Memory Access (DMA) Buffer Transfer count
+ * register B channel 2 (read/write).
+ *
+ * DDAR3 Direct Memory Access (DMA) Device Address Register
+ * channel 3 (read/write).
+ * DCSR3 Direct Memory Access (DMA) Control and Status
+ * Register channel 3 (read/write).
+ * DBSA3 Direct Memory Access (DMA) Buffer Start address
+ * register A channel 3 (read/write).
+ * DBTA3 Direct Memory Access (DMA) Buffer Transfer count
+ * register A channel 3 (read/write).
+ * DBSB3 Direct Memory Access (DMA) Buffer Start address
+ * register B channel 3 (read/write).
+ * DBTB3 Direct Memory Access (DMA) Buffer Transfer count
+ * register B channel 3 (read/write).
+ *
+ * DDAR4 Direct Memory Access (DMA) Device Address Register
+ * channel 4 (read/write).
+ * DCSR4 Direct Memory Access (DMA) Control and Status
+ * Register channel 4 (read/write).
+ * DBSA4 Direct Memory Access (DMA) Buffer Start address
+ * register A channel 4 (read/write).
+ * DBTA4 Direct Memory Access (DMA) Buffer Transfer count
+ * register A channel 4 (read/write).
+ * DBSB4 Direct Memory Access (DMA) Buffer Start address
+ * register B channel 4 (read/write).
+ * DBTB4 Direct Memory Access (DMA) Buffer Transfer count
+ * register B channel 4 (read/write).
+ *
+ * DDAR5 Direct Memory Access (DMA) Device Address Register
+ * channel 5 (read/write).
+ * DCSR5 Direct Memory Access (DMA) Control and Status
+ * Register channel 5 (read/write).
+ * DBSA5 Direct Memory Access (DMA) Buffer Start address
+ * register A channel 5 (read/write).
+ * DBTA5 Direct Memory Access (DMA) Buffer Transfer count
+ * register A channel 5 (read/write).
+ * DBSB5 Direct Memory Access (DMA) Buffer Start address
+ * register B channel 5 (read/write).
+ * DBTB5 Direct Memory Access (DMA) Buffer Transfer count
+ * register B channel 5 (read/write).
+ */
+
+#define DMASp 0x00000020 /* DMA control reg. Space [byte] */
+
+#define DDAR(Nb) __REG(0xB0000000 + (Nb)*DMASp) /* DMA Device Address Reg. channel [0..5] */
+#define SetDCSR(Nb) __REG(0xB0000004 + (Nb)*DMASp) /* Set DMA Control & Status Reg. channel [0..5] (write) */
+#define ClrDCSR(Nb) __REG(0xB0000008 + (Nb)*DMASp) /* Clear DMA Control & Status Reg. channel [0..5] (write) */
+#define RdDCSR(Nb) __REG(0xB000000C + (Nb)*DMASp) /* Read DMA Control & Status Reg. channel [0..5] (read) */
+#define DBSA(Nb) __REG(0xB0000010 + (Nb)*DMASp) /* DMA Buffer Start address reg. A channel [0..5] */
+#define DBTA(Nb) __REG(0xB0000014 + (Nb)*DMASp) /* DMA Buffer Transfer count reg. A channel [0..5] */
+#define DBSB(Nb) __REG(0xB0000018 + (Nb)*DMASp) /* DMA Buffer Start address reg. B channel [0..5] */
+#define DBTB(Nb) __REG(0xB000001C + (Nb)*DMASp) /* DMA Buffer Transfer count reg. B channel [0..5] */
+
+#define DDAR_RW 0x00000001 /* device data Read/Write */
+#define DDAR_DevWr (DDAR_RW*0) /* Device data Write */
+ /* (memory -> device) */
+#define DDAR_DevRd (DDAR_RW*1) /* Device data Read */
+ /* (device -> memory) */
+#define DDAR_E 0x00000002 /* big/little Endian device */
+#define DDAR_LtlEnd (DDAR_E*0) /* Little Endian device */
+#define DDAR_BigEnd (DDAR_E*1) /* Big Endian device */
+#define DDAR_BS 0x00000004 /* device Burst Size */
+#define DDAR_Brst4 (DDAR_BS*0) /* Burst-of-4 device */
+#define DDAR_Brst8 (DDAR_BS*1) /* Burst-of-8 device */
+#define DDAR_DW 0x00000008 /* device Data Width */
+#define DDAR_8BitDev (DDAR_DW*0) /* 8-Bit Device */
+#define DDAR_16BitDev (DDAR_DW*1) /* 16-Bit Device */
+#define DDAR_DS Fld (4, 4) /* Device Select */
+#define DDAR_Ser0UDCTr /* Ser. port 0 UDC Transmit */ \
+ (0x0 << FShft (DDAR_DS))
+#define DDAR_Ser0UDCRc /* Ser. port 0 UDC Receive */ \
+ (0x1 << FShft (DDAR_DS))
+#define DDAR_Ser1SDLCTr /* Ser. port 1 SDLC Transmit */ \
+ (0x2 << FShft (DDAR_DS))
+#define DDAR_Ser1SDLCRc /* Ser. port 1 SDLC Receive */ \
+ (0x3 << FShft (DDAR_DS))
+#define DDAR_Ser1UARTTr /* Ser. port 1 UART Transmit */ \
+ (0x4 << FShft (DDAR_DS))
+#define DDAR_Ser1UARTRc /* Ser. port 1 UART Receive */ \
+ (0x5 << FShft (DDAR_DS))
+#define DDAR_Ser2ICPTr /* Ser. port 2 ICP Transmit */ \
+ (0x6 << FShft (DDAR_DS))
+#define DDAR_Ser2ICPRc /* Ser. port 2 ICP Receive */ \
+ (0x7 << FShft (DDAR_DS))
+#define DDAR_Ser3UARTTr /* Ser. port 3 UART Transmit */ \
+ (0x8 << FShft (DDAR_DS))
+#define DDAR_Ser3UARTRc /* Ser. port 3 UART Receive */ \
+ (0x9 << FShft (DDAR_DS))
+#define DDAR_Ser4MCP0Tr /* Ser. port 4 MCP 0 Transmit */ \
+ /* (audio) */ \
+ (0xA << FShft (DDAR_DS))
+#define DDAR_Ser4MCP0Rc /* Ser. port 4 MCP 0 Receive */ \
+ /* (audio) */ \
+ (0xB << FShft (DDAR_DS))
+#define DDAR_Ser4MCP1Tr /* Ser. port 4 MCP 1 Transmit */ \
+ /* (telecom) */ \
+ (0xC << FShft (DDAR_DS))
+#define DDAR_Ser4MCP1Rc /* Ser. port 4 MCP 1 Receive */ \
+ /* (telecom) */ \
+ (0xD << FShft (DDAR_DS))
+#define DDAR_Ser4SSPTr /* Ser. port 4 SSP Transmit */ \
+ (0xE << FShft (DDAR_DS))
+#define DDAR_Ser4SSPRc /* Ser. port 4 SSP Receive */ \
+ (0xF << FShft (DDAR_DS))
+#define DDAR_DA Fld (24, 8) /* Device Address */
+#define DDAR_DevAdd(Add) /* Device Address */ \
+ (((Add) & 0xF0000000) | \
+ (((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2)))
+#define DDAR_Ser0UDCWr /* Ser. port 0 UDC Write */ \
+ (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
+ DDAR_Ser0UDCTr + DDAR_DevAdd (__PREG(Ser0UDCDR)))
+#define DDAR_Ser0UDCRd /* Ser. port 0 UDC Read */ \
+ (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
+ DDAR_Ser0UDCRc + DDAR_DevAdd (__PREG(Ser0UDCDR)))
+#define DDAR_Ser1UARTWr /* Ser. port 1 UART Write */ \
+ (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
+ DDAR_Ser1UARTTr + DDAR_DevAdd (__PREG(Ser1UTDR)))
+#define DDAR_Ser1UARTRd /* Ser. port 1 UART Read */ \
+ (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
+ DDAR_Ser1UARTRc + DDAR_DevAdd (__PREG(Ser1UTDR)))
+#define DDAR_Ser1SDLCWr /* Ser. port 1 SDLC Write */ \
+ (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
+ DDAR_Ser1SDLCTr + DDAR_DevAdd (__PREG(Ser1SDDR)))
+#define DDAR_Ser1SDLCRd /* Ser. port 1 SDLC Read */ \
+ (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
+ DDAR_Ser1SDLCRc + DDAR_DevAdd (__PREG(Ser1SDDR)))
+#define DDAR_Ser2UARTWr /* Ser. port 2 UART Write */ \
+ (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
+ DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2UTDR)))
+#define DDAR_Ser2UARTRd /* Ser. port 2 UART Read */ \
+ (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
+ DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2UTDR)))
+#define DDAR_Ser2HSSPWr /* Ser. port 2 HSSP Write */ \
+ (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
+ DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2HSDR)))
+#define DDAR_Ser2HSSPRd /* Ser. port 2 HSSP Read */ \
+ (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
+ DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2HSDR)))
+#define DDAR_Ser3UARTWr /* Ser. port 3 UART Write */ \
+ (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
+ DDAR_Ser3UARTTr + DDAR_DevAdd (__PREG(Ser3UTDR)))
+#define DDAR_Ser3UARTRd /* Ser. port 3 UART Read */ \
+ (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
+ DDAR_Ser3UARTRc + DDAR_DevAdd (__PREG(Ser3UTDR)))
+#define DDAR_Ser4MCP0Wr /* Ser. port 4 MCP 0 Write (audio) */ \
+ (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
+ DDAR_Ser4MCP0Tr + DDAR_DevAdd (__PREG(Ser4MCDR0)))
+#define DDAR_Ser4MCP0Rd /* Ser. port 4 MCP 0 Read (audio) */ \
+ (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
+ DDAR_Ser4MCP0Rc + DDAR_DevAdd (__PREG(Ser4MCDR0)))
+#define DDAR_Ser4MCP1Wr /* Ser. port 4 MCP 1 Write */ \
+ /* (telecom) */ \
+ (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
+ DDAR_Ser4MCP1Tr + DDAR_DevAdd (__PREG(Ser4MCDR1)))
+#define DDAR_Ser4MCP1Rd /* Ser. port 4 MCP 1 Read */ \
+ /* (telecom) */ \
+ (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
+ DDAR_Ser4MCP1Rc + DDAR_DevAdd (__PREG(Ser4MCDR1)))
+#define DDAR_Ser4SSPWr /* Ser. port 4 SSP Write (16 bits) */ \
+ (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
+ DDAR_Ser4SSPTr + DDAR_DevAdd (__PREG(Ser4SSDR)))
+#define DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ \
+ (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
+ DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR)))
+
+#define DCSR_RUN 0x00000001 /* DMA RUNing */
+#define DCSR_IE 0x00000002 /* DMA Interrupt Enable */
+#define DCSR_ERROR 0x00000004 /* DMA ERROR */
+#define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */
+#define DCSR_STRTA 0x00000010 /* STaRTed DMA transfer buffer A */
+#define DCSR_DONEB 0x00000020 /* DONE DMA transfer buffer B */
+#define DCSR_STRTB 0x00000040 /* STaRTed DMA transfer buffer B */
+#define DCSR_BIU 0x00000080 /* DMA Buffer In Use */
+#define DCSR_BufA (DCSR_BIU*0) /* DMA Buffer A in use */
+#define DCSR_BufB (DCSR_BIU*1) /* DMA Buffer B in use */
+
+#define DBT_TC Fld (13, 0) /* Transfer Count */
+#define DBTA_TCA DBT_TC /* Transfer Count buffer A */
+#define DBTB_TCB DBT_TC /* Transfer Count buffer B */
+
+
+/*
+ * Liquid Crystal Display (LCD) control registers
+ *
+ * Registers
+ * LCCR0 Liquid Crystal Display (LCD) Control Register 0
+ * (read/write).
+ * [Bits LDM, BAM, and ERM are only implemented in
+ * versions 2.0 (rev. = 8) and higher of the StrongARM
+ * SA-1100.]
+ * LCSR Liquid Crystal Display (LCD) Status Register
+ * (read/write).
+ * [Bit LDD can be only read in versions 1.0 (rev. = 1)
+ * and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be
+ * read and written (cleared) in versions 2.0 (rev. = 8)
+ * and higher.]
+ * DBAR1 Liquid Crystal Display (LCD) Direct Memory Access
+ * (DMA) Base Address Register channel 1 (read/write).
+ * DCAR1 Liquid Crystal Display (LCD) Direct Memory Access
+ * (DMA) Current Address Register channel 1 (read).
+ * DBAR2 Liquid Crystal Display (LCD) Direct Memory Access
+ * (DMA) Base Address Register channel 2 (read/write).
+ * DCAR2 Liquid Crystal Display (LCD) Direct Memory Access
+ * (DMA) Current Address Register channel 2 (read).
+ * LCCR1 Liquid Crystal Display (LCD) Control Register 1
+ * (read/write).
+ * [The LCCR1 register can be only written in
+ * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ * StrongARM SA-1100, it can be written and read in
+ * versions 2.0 (rev. = 8) and higher.]
+ * LCCR2 Liquid Crystal Display (LCD) Control Register 2
+ * (read/write).
+ * [The LCCR1 register can be only written in
+ * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ * StrongARM SA-1100, it can be written and read in
+ * versions 2.0 (rev. = 8) and higher.]
+ * LCCR3 Liquid Crystal Display (LCD) Control Register 3
+ * (read/write).
+ * [The LCCR1 register can be only written in
+ * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ * StrongARM SA-1100, it can be written and read in
+ * versions 2.0 (rev. = 8) and higher. Bit PCP is only
+ * implemented in versions 2.0 (rev. = 8) and higher of
+ * the StrongARM SA-1100.]
+ *
+ * Clocks
+ * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
+ * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
+ * fpix, Tpix Frequency, period of the pixel clock.
+ * fln, Tln Frequency, period of the line clock.
+ * fac, Tac Frequency, period of the AC bias clock.
+ */
+
+#define LCD_PEntrySp 2 /* LCD Palette Entry Space [byte] */
+#define LCD_4BitPSp /* LCD 4-Bit pixel Palette Space */ \
+ /* [byte] */ \
+ (16*LCD_PEntrySp)
+#define LCD_8BitPSp /* LCD 8-Bit pixel Palette Space */ \
+ /* [byte] */ \
+ (256*LCD_PEntrySp)
+#define LCD_12_16BitPSp /* LCD 12/16-Bit pixel */ \
+ /* dummy-Palette Space [byte] */ \
+ (16*LCD_PEntrySp)
+
+#define LCD_PGrey Fld (4, 0) /* LCD Palette entry Grey value */
+#define LCD_PBlue Fld (4, 0) /* LCD Palette entry Blue value */
+#define LCD_PGreen Fld (4, 4) /* LCD Palette entry Green value */
+#define LCD_PRed Fld (4, 8) /* LCD Palette entry Red value */
+#define LCD_PBS Fld (2, 12) /* LCD Pixel Bit Size */
+#define LCD_4Bit /* LCD 4-Bit pixel mode */ \
+ (0 << FShft (LCD_PBS))
+#define LCD_8Bit /* LCD 8-Bit pixel mode */ \
+ (1 << FShft (LCD_PBS))
+#define LCD_12_16Bit /* LCD 12/16-Bit pixel mode */ \
+ (2 << FShft (LCD_PBS))
+
+#define LCD_Int0_0 0x0 /* LCD Intensity = 0.0% = 0 */
+#define LCD_Int11_1 0x1 /* LCD Intensity = 11.1% = 1/9 */
+#define LCD_Int20_0 0x2 /* LCD Intensity = 20.0% = 1/5 */
+#define LCD_Int26_7 0x3 /* LCD Intensity = 26.7% = 4/15 */
+#define LCD_Int33_3 0x4 /* LCD Intensity = 33.3% = 3/9 */
+#define LCD_Int40_0 0x5 /* LCD Intensity = 40.0% = 2/5 */
+#define LCD_Int44_4 0x6 /* LCD Intensity = 44.4% = 4/9 */
+#define LCD_Int50_0 0x7 /* LCD Intensity = 50.0% = 1/2 */
+#define LCD_Int55_6 0x8 /* LCD Intensity = 55.6% = 5/9 */
+#define LCD_Int60_0 0x9 /* LCD Intensity = 60.0% = 3/5 */
+#define LCD_Int66_7 0xA /* LCD Intensity = 66.7% = 6/9 */
+#define LCD_Int73_3 0xB /* LCD Intensity = 73.3% = 11/15 */
+#define LCD_Int80_0 0xC /* LCD Intensity = 80.0% = 4/5 */
+#define LCD_Int88_9 0xD /* LCD Intensity = 88.9% = 8/9 */
+#define LCD_Int100_0 0xE /* LCD Intensity = 100.0% = 1 */
+#define LCD_Int100_0A 0xF /* LCD Intensity = 100.0% = 1 */
+ /* (Alternative) */
+
+#define LCCR0 __REG(0xB0100000) /* LCD Control Reg. 0 */
+#define LCSR __REG(0xB0100004) /* LCD Status Reg. */
+#define DBAR1 __REG(0xB0100010) /* LCD DMA Base Address Reg. channel 1 */
+#define DCAR1 __REG(0xB0100014) /* LCD DMA Current Address Reg. channel 1 */
+#define DBAR2 __REG(0xB0100018) /* LCD DMA Base Address Reg. channel 2 */
+#define DCAR2 __REG(0xB010001C) /* LCD DMA Current Address Reg. channel 2 */
+#define LCCR1 __REG(0xB0100020) /* LCD Control Reg. 1 */
+#define LCCR2 __REG(0xB0100024) /* LCD Control Reg. 2 */
+#define LCCR3 __REG(0xB0100028) /* LCD Control Reg. 3 */
+
+#define LCCR0_LEN 0x00000001 /* LCD ENable */
+#define LCCR0_CMS 0x00000002 /* Color/Monochrome display Select */
+#define LCCR0_Color (LCCR0_CMS*0) /* Color display */
+#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */
+#define LCCR0_SDS 0x00000004 /* Single/Dual panel display */
+ /* Select */
+#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */
+#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */
+#define LCCR0_LDM 0x00000008 /* LCD Disable done (LDD) */
+ /* interrupt Mask (disable) */
+#define LCCR0_BAM 0x00000010 /* Base Address update (BAU) */
+ /* interrupt Mask (disable) */
+#define LCCR0_ERM 0x00000020 /* LCD ERror (BER, IOL, IUL, IOU, */
+ /* IUU, OOL, OUL, OOU, and OUU) */
+ /* interrupt Mask (disable) */
+#define LCCR0_PAS 0x00000080 /* Passive/Active display Select */
+#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */
+#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */
+#define LCCR0_BLE 0x00000100 /* Big/Little Endian select */
+#define LCCR0_LtlEnd (LCCR0_BLE*0) /* Little Endian frame buffer */
+#define LCCR0_BigEnd (LCCR0_BLE*1) /* Big Endian frame buffer */
+#define LCCR0_DPD 0x00000200 /* Double Pixel Data (monochrome */
+ /* display mode) */
+#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */
+ /* display */
+#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */
+ /* display */
+#define LCCR0_PDD Fld (8, 12) /* Palette DMA request Delay */
+ /* [Tmem] */
+#define LCCR0_DMADel(Tcpu) /* palette DMA request Delay */ \
+ /* [0..510 Tcpu] */ \
+ ((Tcpu)/2 << FShft (LCCR0_PDD))
+
+#define LCSR_LDD 0x00000001 /* LCD Disable Done */
+#define LCSR_BAU 0x00000002 /* Base Address Update (read) */
+#define LCSR_BER 0x00000004 /* Bus ERror */
+#define LCSR_ABC 0x00000008 /* AC Bias clock Count */
+#define LCSR_IOL 0x00000010 /* Input FIFO Over-run Lower */
+ /* panel */
+#define LCSR_IUL 0x00000020 /* Input FIFO Under-run Lower */
+ /* panel */
+#define LCSR_IOU 0x00000040 /* Input FIFO Over-run Upper */
+ /* panel */
+#define LCSR_IUU 0x00000080 /* Input FIFO Under-run Upper */
+ /* panel */
+#define LCSR_OOL 0x00000100 /* Output FIFO Over-run Lower */
+ /* panel */
+#define LCSR_OUL 0x00000200 /* Output FIFO Under-run Lower */
+ /* panel */
+#define LCSR_OOU 0x00000400 /* Output FIFO Over-run Upper */
+ /* panel */
+#define LCSR_OUU 0x00000800 /* Output FIFO Under-run Upper */
+ /* panel */
+
+#define LCCR1_PPL Fld (6, 4) /* Pixels Per Line/16 - 1 */
+#define LCCR1_DisWdth(Pixel) /* Display Width [16..1024 pix.] */ \
+ (((Pixel) - 16)/16 << FShft (LCCR1_PPL))
+#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */
+ /* pulse Width - 1 [Tpix] (L_LCLK) */
+#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \
+ /* pulse Width [1..64 Tpix] */ \
+ (((Tpix) - 1) << FShft (LCCR1_HSW))
+#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */
+ /* count - 1 [Tpix] */
+#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \
+ /* [1..256 Tpix] */ \
+ (((Tpix) - 1) << FShft (LCCR1_ELW))
+#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */
+ /* Wait count - 1 [Tpix] */
+#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \
+ /* [1..256 Tpix] */ \
+ (((Tpix) - 1) << FShft (LCCR1_BLW))
+
+#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */
+#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \
+ (((Line) - 1) << FShft (LCCR2_LPP))
+#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */
+ /* Width - 1 [Tln] (L_FCLK) */
+#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \
+ /* Width [1..64 Tln] */ \
+ (((Tln) - 1) << FShft (LCCR2_VSW))
+#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */
+ /* count [Tln] */
+#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \
+ /* [0..255 Tln] */ \
+ ((Tln) << FShft (LCCR2_EFW))
+#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */
+ /* Wait count [Tln] */
+#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \
+ /* [0..255 Tln] */ \
+ ((Tln) << FShft (LCCR2_BFW))
+
+#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor/2 - 2 */
+ /* [1..255] (L_PCLK) */
+ /* fpix = fcpu/(2*(PCD + 2)) */
+ /* Tpix = 2*(PCD + 2)*Tcpu */
+#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor [6..514] */ \
+ (((Div) - 4)/2 << FShft (LCCR3_PCD))
+ /* fpix = fcpu/(2*Floor (Div/2)) */
+ /* Tpix = 2*Floor (Div/2)*Tcpu */
+#define LCCR3_CeilPixClkDiv(Div) /* Ceil. of PixClkDiv [6..514] */ \
+ (((Div) - 3)/2 << FShft (LCCR3_PCD))
+ /* fpix = fcpu/(2*Ceil (Div/2)) */
+ /* Tpix = 2*Ceil (Div/2)*Tcpu */
+#define LCCR3_ACB Fld (8, 8) /* AC Bias clock half period - 1 */
+ /* [Tln] (L_BIAS) */
+#define LCCR3_ACBsDiv(Div) /* AC Bias clock Divisor [2..512] */ \
+ (((Div) - 2)/2 << FShft (LCCR3_ACB))
+ /* fac = fln/(2*Floor (Div/2)) */
+ /* Tac = 2*Floor (Div/2)*Tln */
+#define LCCR3_CeilACBsDiv(Div) /* Ceil. of ACBsDiv [2..512] */ \
+ (((Div) - 1)/2 << FShft (LCCR3_ACB))
+ /* fac = fln/(2*Ceil (Div/2)) */
+ /* Tac = 2*Ceil (Div/2)*Tln */
+#define LCCR3_API Fld (4, 16) /* AC bias Pin transitions per */
+ /* Interrupt */
+#define LCCR3_ACBsCntOff /* AC Bias clock transition Count */ \
+ /* Off */ \
+ (0 << FShft (LCCR3_API))
+#define LCCR3_ACBsCnt(Trans) /* AC Bias clock transition Count */ \
+ /* [1..15] */ \
+ ((Trans) << FShft (LCCR3_API))
+#define LCCR3_VSP 0x00100000 /* Vertical Synchronization pulse */
+ /* Polarity (L_FCLK) */
+#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */
+ /* active High */
+#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */
+ /* active Low */
+#define LCCR3_HSP 0x00200000 /* Horizontal Synchronization */
+ /* pulse Polarity (L_LCLK) */
+#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */
+ /* pulse active High */
+#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */
+ /* pulse active Low */
+#define LCCR3_PCP 0x00400000 /* Pixel Clock Polarity (L_PCLK) */
+#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */
+#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */
+#define LCCR3_OEP 0x00800000 /* Output Enable Polarity (L_BIAS, */
+ /* active display mode) */
+#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */
+#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */
+
+#ifndef __ASSEMBLY__
+extern unsigned int processor_id;
+#endif
+
+#define CPU_REVISION (processor_id & 15)
+#define CPU_SA1110_A0 (0)
+#define CPU_SA1110_B0 (4)
+#define CPU_SA1110_B1 (5)
+#define CPU_SA1110_B2 (6)
+#define CPU_SA1110_B4 (8)
+
+#define CPU_SA1100_ID (0x4401a110)
+#define CPU_SA1100_MASK (0xfffffff0)
+#define CPU_SA1110_ID (0x6901b110)
+#define CPU_SA1110_MASK (0xfffffff0)
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1101.h b/arch/arm/mach-sa1100/include/mach/SA-1101.h
new file mode 100644
index 0000000..5d2ad7d
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/SA-1101.h
@@ -0,0 +1,925 @@
+/*
+ * SA-1101.h
+ *
+ * Copyright (c) Peter Danielsson 1999
+ *
+ * Definition of constants related to the sa1101
+ * support chip for the sa1100
+ *
+ */
+
+
+/* Be sure that virtual mapping is defined right */
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not SA-1101.h
+#endif
+
+#ifndef SA1101_BASE
+#error You must define SA-1101 physical base address
+#endif
+
+#ifndef LANGUAGE
+# ifdef __ASSEMBLY__
+# define LANGUAGE Assembly
+# else
+# define LANGUAGE C
+# endif
+#endif
+
+/*
+ * We have mapped the sa1101 depending on the value of SA1101_BASE.
+ * It then appears from 0xf4000000.
+ */
+
+#define SA1101_p2v( x ) ((x) - SA1101_BASE + 0xf4000000)
+#define SA1101_v2p( x ) ((x) - 0xf4000000 + SA1101_BASE)
+
+#ifndef SA1101_p2v
+#define SA1101_p2v(PhAdd) (PhAdd)
+#endif
+
+#include <mach/bitfield.h>
+
+#define C 0
+#define Assembly 1
+
+
+/*
+ * Memory map
+ */
+
+#define __SHMEM_CONTROL0 0x00000000
+#define __SYSTEM_CONTROL1 0x00000400
+#define __ARBITER 0x00020000
+#define __SYSTEM_CONTROL2 0x00040000
+#define __SYSTEM_CONTROL3 0x00060000
+#define __PARALLEL_PORT 0x00080000
+#define __VIDMEM_CONTROL 0x00100000
+#define __UPDATE_FIFO 0x00120000
+#define __SHMEM_CONTROL1 0x00140000
+#define __INTERRUPT_CONTROL 0x00160000
+#define __USB_CONTROL 0x00180000
+#define __TRACK_INTERFACE 0x001a0000
+#define __MOUSE_INTERFACE 0x001b0000
+#define __KEYPAD_INTERFACE 0x001c0000
+#define __PCMCIA_INTERFACE 0x001e0000
+#define __VGA_CONTROL 0x00200000
+#define __GPIO_INTERFACE 0x00300000
+
+/*
+ * Macro that calculates real address for registers in the SA-1101
+ */
+
+#define _SA1101( x ) ((x) + SA1101_BASE)
+
+/*
+ * Interface and shared memory controller registers
+ *
+ * Registers
+ * SKCR SA-1101 control register (read/write)
+ * SMCR Shared Memory Controller Register
+ * SNPR Snoop Register
+ */
+
+#define _SKCR _SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
+#define _SMCR _SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
+#define _SNPR _SA1101( 0x00140400 ) /* Snoop Reg. */
+
+#if LANGUAGE == C
+#define SKCR (*((volatile Word *) SA1101_p2v (_SKCR)))
+#define SMCR (*((volatile Word *) SA1101_p2v (_SMCR)))
+#define SNPR (*((volatile Word *) SA1101_p2v (_SNPR)))
+
+#define SKCR_PLLEn 0x0001 /* Enable On-Chip PLL */
+#define SKCR_BCLKEn 0x0002 /* Enables BCLK */
+#define SKCR_Sleep 0x0004 /* Sleep Mode */
+#define SKCR_IRefEn 0x0008 /* DAC Iref input enable */
+#define SKCR_VCOON 0x0010 /* VCO bias */
+#define SKCR_ScanTestEn 0x0020 /* Enables scan test */
+#define SKCR_ClockTestEn 0x0040 /* Enables clock test */
+
+#define SMCR_DCAC Fld(2,0) /* Number of column address bits */
+#define SMCR_DRAC Fld(2,2) /* Number of row address bits */
+#define SMCR_ArbiterBias 0x0008 /* favor video or USB */
+#define SMCR_TopVidMem Fld(4,5) /* Top 4 bits of vidmem addr. */
+
+#define SMCR_ColAdrBits( x ) /* col. addr bits 8..11 */ \
+ (( (x) - 8 ) << FShft (SMCR_DCAC))
+#define SMCR_RowAdrBits( x ) /* row addr bits 9..12 */\
+ (( (x) - 9 ) << FShft (SMCR_DRAC))
+
+#define SNPR_VFBstart Fld(12,0) /* Video frame buffer addr */
+#define SNPR_VFBsize Fld(11,12) /* Video frame buffer size */
+#define SNPR_WholeBank (1 << 23) /* Whole bank bit */
+#define SNPR_BankSelect Fld(2,27) /* Bank select */
+#define SNPR_SnoopEn (1 << 31) /* Enable snoop operation */
+
+#define SNPR_Set_VFBsize( x ) /* set frame buffer size (in kb) */ \
+ ( (x) << FShft (SNPR_VFBsize))
+#define SNPR_Select_Bank(x) /* select bank 0 or 1 */ \
+ (( (x) + 1 ) << FShft (SNPR_BankSelect ))
+
+#endif /* LANGUAGE == C */
+
+/*
+ * Video Memory Controller
+ *
+ * Registers
+ * VMCCR Configuration register
+ * VMCAR VMC address register
+ * VMCDR VMC data register
+ *
+ */
+
+#define _VMCCR _SA1101( 0x00100000 ) /* Configuration register */
+#define _VMCAR _SA1101( 0x00101000 ) /* VMC address register */
+#define _VMCDR _SA1101( 0x00101400 ) /* VMC data register */
+
+#if LANGUAGE == C
+#define VMCCR (*((volatile Word *) SA1101_p2v (_VMCCR)))
+#define VMCAR (*((volatile Word *) SA1101_p2v (_VMCAR)))
+#define VMCDR (*((volatile Word *) SA1101_p2v (_VMCDR)))
+
+#define VMCCR_RefreshEn 0x0000 /* Enable memory refresh */
+#define VMCCR_Config 0x0001 /* DRAM size */
+#define VMCCR_RefPeriod Fld(2,3) /* Refresh period */
+#define VMCCR_StaleDataWait Fld(4,5) /* Stale FIFO data timeout counter */
+#define VMCCR_SleepState (1<<9) /* State of interface pins in sleep*/
+#define VMCCR_RefTest (1<<10) /* refresh test */
+#define VMCCR_RefLow Fld(6,11) /* refresh low counter */
+#define VMCCR_RefHigh Fld(7,17) /* refresh high counter */
+#define VMCCR_SDTCTest Fld(7,24) /* stale data timeout counter */
+#define VMCCR_ForceSelfRef (1<<31) /* Force self refresh */
+
+#endif LANGUAGE == C
+
+
+/* Update FIFO
+ *
+ * Registers
+ * UFCR Update FIFO Control Register
+ * UFSR Update FIFO Status Register
+ * UFLVLR update FIFO level register
+ * UFDR update FIFO data register
+ */
+
+#define _UFCR _SA1101(0x00120000) /* Update FIFO Control Reg. */
+#define _UFSR _SA1101(0x00120400) /* Update FIFO Status Reg. */
+#define _UFLVLR _SA1101(0x00120800) /* Update FIFO level reg. */
+#define _UFDR _SA1101(0x00120c00) /* Update FIFO data reg. */
+
+#if LANGUAGE == C
+
+#define UFCR (*((volatile Word *) SA1101_p2v (_UFCR)))
+#define UFSR (*((volatile Word *) SA1101_p2v (_UFSR)))
+#define UFLVLR (*((volatile Word *) SA1101_p2v (_UFLVLR)))
+#define UFDR (*((volatile Word *) SA1101_p2v (_UFDR)))
+
+
+#define UFCR_FifoThreshhold Fld(7,0) /* Level for FifoGTn flag */
+
+#define UFSR_FifoGTnFlag 0x01 /* FifoGTn flag */#define UFSR_FifoEmpty 0x80 /* FIFO is empty */
+
+#endif /* LANGUAGE == C */
+
+/* System Controller
+ *
+ * Registers
+ * SKPCR Power Control Register
+ * SKCDR Clock Divider Register
+ * DACDR1 DAC1 Data register
+ * DACDR2 DAC2 Data register
+ */
+
+#define _SKPCR _SA1101(0x00000400)
+#define _SKCDR _SA1101(0x00040000)
+#define _DACDR1 _SA1101(0x00060000)
+#define _DACDR2 _SA1101(0x00060400)
+
+#if LANGUAGE == C
+#define SKPCR (*((volatile Word *) SA1101_p2v (_SKPCR)))
+#define SKCDR (*((volatile Word *) SA1101_p2v (_SKCDR)))
+#define DACDR1 (*((volatile Word *) SA1101_p2v (_DACDR1)))
+#define DACDR2 (*((volatile Word *) SA1101_p2v (_DACDR2)))
+
+#define SKPCR_UCLKEn 0x01 /* USB Enable */
+#define SKPCR_PCLKEn 0x02 /* PS/2 Enable */
+#define SKPCR_ICLKEn 0x04 /* Interrupt Controller Enable */
+#define SKPCR_VCLKEn 0x08 /* Video Controller Enable */
+#define SKPCR_PICLKEn 0x10 /* parallel port Enable */
+#define SKPCR_DCLKEn 0x20 /* DACs Enable */
+#define SKPCR_nKPADEn 0x40 /* Multiplexer */
+
+#define SKCDR_PLLMul Fld(7,0) /* PLL Multiplier */
+#define SKCDR_VCLKEn Fld(2,7) /* Video controller clock divider */
+#define SKDCR_BCLKEn (1<<9) /* BCLK Divider */
+#define SKDCR_UTESTCLKEn (1<<10) /* Route USB clock during test mode */
+#define SKDCR_DivRValue Fld(6,11) /* Input clock divider for PLL */
+#define SKDCR_DivNValue Fld(5,17) /* Output clock divider for PLL */
+#define SKDCR_PLLRSH Fld(3,22) /* PLL bandwidth control */
+#define SKDCR_ChargePump (1<<25) /* Charge pump control */
+#define SKDCR_ClkTestMode (1<<26) /* Clock output test mode */
+#define SKDCR_ClkTestEn (1<<27) /* Test clock generator */
+#define SKDCR_ClkJitterCntl Fld(3,28) /* video clock jitter compensation */
+
+#define DACDR_DACCount Fld(8,0) /* Count value */
+#define DACDR1_DACCount DACDR_DACCount
+#define DACDR2_DACCount DACDR_DACCount
+
+#endif /* LANGUAGE == C */
+
+/*
+ * Parallel Port Interface
+ *
+ * Registers
+ * IEEE_Config IEEE mode selection and programmable attributes
+ * IEEE_Control Controls the states of IEEE port control outputs
+ * IEEE_Data Forward transfer data register
+ * IEEE_Addr Forward transfer address register
+ * IEEE_Status Port IO signal status register
+ * IEEE_IntStatus Port interrupts status register
+ * IEEE_FifoLevels Rx and Tx FIFO interrupt generation levels
+ * IEEE_InitTime Forward timeout counter initial value
+ * IEEE_TimerStatus Forward timeout counter current value
+ * IEEE_FifoReset Reset forward transfer FIFO
+ * IEEE_ReloadValue Counter reload value
+ * IEEE_TestControl Control testmode
+ * IEEE_TestDataIn Test data register
+ * IEEE_TestDataInEn Enable test data
+ * IEEE_TestCtrlIn Test control signals
+ * IEEE_TestCtrlInEn Enable test control signals
+ * IEEE_TestDataStat Current data bus value
+ *
+ */
+
+/*
+ * The control registers are defined as offsets from a base address
+ */
+
+#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
+
+#define _IEEE_Config _IEEE( 0x0000 )
+#define _IEEE_Control _IEEE( 0x0400 )
+#define _IEEE_Data _IEEE( 0x4000 )
+#define _IEEE_Addr _IEEE( 0x0800 )
+#define _IEEE_Status _IEEE( 0x0c00 )
+#define _IEEE_IntStatus _IEEE( 0x1000 )
+#define _IEEE_FifoLevels _IEEE( 0x1400 )
+#define _IEEE_InitTime _IEEE( 0x1800 )
+#define _IEEE_TimerStatus _IEEE( 0x1c00 )
+#define _IEEE_FifoReset _IEEE( 0x2000 )
+#define _IEEE_ReloadValue _IEEE( 0x3c00 )
+#define _IEEE_TestControl _IEEE( 0x2400 )
+#define _IEEE_TestDataIn _IEEE( 0x2800 )
+#define _IEEE_TestDataInEn _IEEE( 0x2c00 )
+#define _IEEE_TestCtrlIn _IEEE( 0x3000 )
+#define _IEEE_TestCtrlInEn _IEEE( 0x3400 )
+#define _IEEE_TestDataStat _IEEE( 0x3800 )
+
+
+#if LANGUAGE == C
+#define IEEE_Config (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
+#define IEEE_Control (*((volatile Word *) SA1101_p2v (_IEEE_Control)))
+#define IEEE_Data (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
+#define IEEE_Addr (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
+#define IEEE_Status (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
+#define IEEE_IntStatus (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus)))
+#define IEEE_FifoLevels (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels)))
+#define IEEE_InitTime (*((volatile Word *) SA1101_p2v (_IEEE_InitTime)))
+#define IEEE_TimerStatus (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus)))
+#define IEEE_FifoReset (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset)))
+#define IEEE_ReloadValue (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue)))
+#define IEEE_TestControl (*((volatile Word *) SA1101_p2v (_IEEE_TestControl)))
+#define IEEE_TestDataIn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn)))
+#define IEEE_TestDataInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn)))
+#define IEEE_TestCtrlIn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn)))
+#define IEEE_TestCtrlInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn)))
+#define IEEE_TestDataStat (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat)))
+
+
+#define IEEE_Config_M Fld(3,0) /* Mode select */
+#define IEEE_Config_D 0x04 /* FIFO access enable */
+#define IEEE_Config_B 0x08 /* 9-bit word enable */
+#define IEEE_Config_T 0x10 /* Data transfer enable */
+#define IEEE_Config_A 0x20 /* Data transfer direction */
+#define IEEE_Config_E 0x40 /* Timer enable */
+#define IEEE_Control_A 0x08 /* AutoFd output */
+#define IEEE_Control_E 0x04 /* Selectin output */
+#define IEEE_Control_T 0x02 /* Strobe output */
+#define IEEE_Control_I 0x01 /* Port init output */
+#define IEEE_Data_C (1<<31) /* Byte count */
+#define IEEE_Data_Db Fld(9,16) /* Data byte 2 */
+#define IEEE_Data_Da Fld(9,0) /* Data byte 1 */
+#define IEEE_Addr_A Fld(8,0) /* forward address transfer byte */
+#define IEEE_Status_A 0x0100 /* nAutoFd port output status */
+#define IEEE_Status_E 0x0080 /* nSelectIn port output status */
+#define IEEE_Status_T 0x0040 /* nStrobe port output status */
+#define IEEE_Status_I 0x0020 /* nInit port output status */
+#define IEEE_Status_B 0x0010 /* Busy port inout status */
+#define IEEE_Status_S 0x0008 /* Select port input status */
+#define IEEE_Status_K 0x0004 /* nAck port input status */
+#define IEEE_Status_F 0x0002 /* nFault port input status */
+#define IEEE_Status_R 0x0001 /* pError port input status */
+
+#define IEEE_IntStatus_IntReqDat 0x0100
+#define IEEE_IntStatus_IntReqEmp 0x0080
+#define IEEE_IntStatus_IntReqInt 0x0040
+#define IEEE_IntStatus_IntReqRav 0x0020
+#define IEEE_IntStatus_IntReqTim 0x0010
+#define IEEE_IntStatus_RevAddrComp 0x0008
+#define IEEE_IntStatus_RevDataComp 0x0004
+#define IEEE_IntStatus_FwdAddrComp 0x0002
+#define IEEE_IntStatus_FwdDataComp 0x0001
+#define IEEE_FifoLevels_RevFifoLevel 2
+#define IEEE_FifoLevels_FwdFifoLevel 1
+#define IEEE_InitTime_TimValInit Fld(22,0)
+#define IEEE_TimerStatus_TimValStat Fld(22,0)
+#define IEEE_ReloadValue_Reload Fld(4,0)
+
+#define IEEE_TestControl_RegClk 0x04
+#define IEEE_TestControl_ClockSelect Fld(2,1)
+#define IEEE_TestControl_TimerTestModeEn 0x01
+#define IEEE_TestCtrlIn_PError 0x10
+#define IEEE_TestCtrlIn_nFault 0x08
+#define IEEE_TestCtrlIn_nAck 0x04
+#define IEEE_TestCtrlIn_PSel 0x02
+#define IEEE_TestCtrlIn_Busy 0x01
+
+#endif /* LANGUAGE == C */
+
+/*
+ * VGA Controller
+ *
+ * Registers
+ * VideoControl Video Control Register
+ * VgaTiming0 VGA Timing Register 0
+ * VgaTiming1 VGA Timing Register 1
+ * VgaTiming2 VGA Timing Register 2
+ * VgaTiming3 VGA Timing Register 3
+ * VgaBorder VGA Border Color Register
+ * VgaDBAR VGADMA Base Address Register
+ * VgaDCAR VGADMA Channel Current Address Register
+ * VgaStatus VGA Status Register
+ * VgaInterruptMask VGA Interrupt Mask Register
+ * VgaPalette VGA Palette Registers
+ * DacControl DAC Control Register
+ * VgaTest VGA Controller Test Register
+ */
+
+#define _VGA( x ) _SA1101( ( x ) + __VGA_CONTROL )
+
+#define _VideoControl _VGA( 0x0000 )
+#define _VgaTiming0 _VGA( 0x0400 )
+#define _VgaTiming1 _VGA( 0x0800 )
+#define _VgaTiming2 _VGA( 0x0c00 )
+#define _VgaTiming3 _VGA( 0x1000 )
+#define _VgaBorder _VGA( 0x1400 )
+#define _VgaDBAR _VGA( 0x1800 )
+#define _VgaDCAR _VGA( 0x1c00 )
+#define _VgaStatus _VGA( 0x2000 )
+#define _VgaInterruptMask _VGA( 0x2400 )
+#define _VgaPalette _VGA( 0x40000 )
+#define _DacControl _VGA( 0x3000 )
+#define _VgaTest _VGA( 0x2c00 )
+
+#if (LANGUAGE == C)
+#define VideoControl (*((volatile Word *) SA1101_p2v (_VideoControl)))
+#define VgaTiming0 (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
+#define VgaTiming1 (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
+#define VgaTiming2 (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
+#define VgaTiming3 (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
+#define VgaBorder (*((volatile Word *) SA1101_p2v (_VgaBorder)))
+#define VgaDBAR (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
+#define VgaDCAR (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
+#define VgaStatus (*((volatile Word *) SA1101_p2v (_VgaStatus)))
+#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask)))
+#define VgaPalette (*((volatile Word *) SA1101_p2v (_VgaPalette)))
+#define DacControl (*((volatile Word *) SA1101_p2v (_DacControl)))
+#define VgaTest (*((volatile Word *) SA1101_p2v (_VgaTest)))
+
+#define VideoControl_VgaEn 0x00000000
+#define VideoControl_BGR 0x00000001
+#define VideoControl_VCompVal Fld(2,2)
+#define VideoControl_VgaReq Fld(4,4)
+#define VideoControl_VBurstL Fld(4,8)
+#define VideoControl_VMode (1<<12)
+#define VideoControl_PalRead (1<<13)
+
+#define VgaTiming0_PPL Fld(6,2)
+#define VgaTiming0_HSW Fld(8,8)
+#define VgaTiming0_HFP Fld(8,16)
+#define VgaTiming0_HBP Fld(8,24)
+
+#define VgaTiming1_LPS Fld(10,0)
+#define VgaTiming1_VSW Fld(6,10)
+#define VgaTiming1_VFP Fld(8,16)
+#define VgaTiming1_VBP Fld(8,24)
+
+#define VgaTiming2_IVS 0x01
+#define VgaTiming2_IHS 0x02
+#define VgaTiming2_CVS 0x04
+#define VgaTiming2_CHS 0x08
+
+#define VgaTiming3_HBS Fld(8,0)
+#define VgaTiming3_HBE Fld(8,8)
+#define VgaTiming3_VBS Fld(8,16)
+#define VgaTiming3_VBE Fld(8,24)
+
+#define VgaBorder_BCOL Fld(24,0)
+
+#define VgaStatus_VFUF 0x01
+#define VgaStatus_VNext 0x02
+#define VgaStatus_VComp 0x04
+
+#define VgaInterruptMask_VFUFMask 0x00
+#define VgaInterruptMask_VNextMask 0x01
+#define VgaInterruptMask_VCompMask 0x02
+
+#define VgaPalette_R Fld(8,0)
+#define VgaPalette_G Fld(8,8)
+#define VgaPalette_B Fld(8,16)
+
+#define DacControl_DACON 0x0001
+#define DacControl_COMPON 0x0002
+#define DacControl_PEDON 0x0004
+#define DacControl_RTrim Fld(5,4)
+#define DacControl_GTrim Fld(5,9)
+#define DacControl_BTrim Fld(5,14)
+
+#define VgaTest_TDAC 0x00
+#define VgaTest_Datatest Fld(4,1)
+#define VgaTest_DACTESTDAC 0x10
+#define VgaTest_DACTESTOUT Fld(3,5)
+
+#endif /* LANGUAGE == C */
+
+/*
+ * USB Host Interface Controller
+ *
+ * Registers
+ * Revision
+ * Control
+ * CommandStatus
+ * InterruptStatus
+ * InterruptEnable
+ * HCCA
+ * PeriodCurrentED
+ * ControlHeadED
+ * BulkHeadED
+ * BulkCurrentED
+ * DoneHead
+ * FmInterval
+ * FmRemaining
+ * FmNumber
+ * PeriodicStart
+ * LSThreshold
+ * RhDescriptorA
+ * RhDescriptorB
+ * RhStatus
+ * RhPortStatus
+ * USBStatus
+ * USBReset
+ * USTAR
+ * USWER
+ * USRFR
+ * USNFR
+ * USTCSR
+ * USSR
+ *
+ */
+
+#define _USB( x ) _SA1101( ( x ) + __USB_CONTROL )
+
+
+#define _Revision _USB( 0x0000 )
+#define _Control _USB( 0x0888 )
+#define _CommandStatus _USB( 0x0c00 )
+#define _InterruptStatus _USB( 0x1000 )
+#define _InterruptEnable _USB( 0x1400 )
+#define _HCCA _USB( 0x1800 )
+#define _PeriodCurrentED _USB( 0x1c00 )
+#define _ControlHeadED _USB( 0x2000 )
+#define _BulkHeadED _USB( 0x2800 )
+#define _BulkCurrentED _USB( 0x2c00 )
+#define _DoneHead _USB( 0x3000 )
+#define _FmInterval _USB( 0x3400 )
+#define _FmRemaining _USB( 0x3800 )
+#define _FmNumber _USB( 0x3c00 )
+#define _PeriodicStart _USB( 0x4000 )
+#define _LSThreshold _USB( 0x4400 )
+#define _RhDescriptorA _USB( 0x4800 )
+#define _RhDescriptorB _USB( 0x4c00 )
+#define _RhStatus _USB( 0x5000 )
+#define _RhPortStatus _USB( 0x5400 )
+#define _USBStatus _USB( 0x11800 )
+#define _USBReset _USB( 0x11c00 )
+
+#define _USTAR _USB( 0x10400 )
+#define _USWER _USB( 0x10800 )
+#define _USRFR _USB( 0x10c00 )
+#define _USNFR _USB( 0x11000 )
+#define _USTCSR _USB( 0x11400 )
+#define _USSR _USB( 0x11800 )
+
+
+#if (LANGUAGE == C)
+
+#define Revision (*((volatile Word *) SA1101_p2v (_Revision)))
+#define Control (*((volatile Word *) SA1101_p2v (_Control)))
+#define CommandStatus (*((volatile Word *) SA1101_p2v (_CommandStatus)))
+#define InterruptStatus (*((volatile Word *) SA1101_p2v (_InterruptStatus)))
+#define InterruptEnable (*((volatile Word *) SA1101_p2v (_InterruptEnable)))
+#define HCCA (*((volatile Word *) SA1101_p2v (_HCCA)))
+#define PeriodCurrentED (*((volatile Word *) SA1101_p2v (_PeriodCurrentED)))
+#define ControlHeadED (*((volatile Word *) SA1101_p2v (_ControlHeadED)))
+#define BulkHeadED (*((volatile Word *) SA1101_p2v (_BulkHeadED)))
+#define BulkCurrentED (*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
+#define DoneHead (*((volatile Word *) SA1101_p2v (_DoneHead)))
+#define FmInterval (*((volatile Word *) SA1101_p2v (_FmInterval)))
+#define FmRemaining (*((volatile Word *) SA1101_p2v (_FmRemaining)))
+#define FmNumber (*((volatile Word *) SA1101_p2v (_FmNumber)))
+#define PeriodicStart (*((volatile Word *) SA1101_p2v (_PeriodicStart)))
+#define LSThreshold (*((volatile Word *) SA1101_p2v (_LSThreshold)))
+#define RhDescriptorA (*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
+#define RhDescriptorB (*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
+#define RhStatus (*((volatile Word *) SA1101_p2v (_RhStatus)))
+#define RhPortStatus (*((volatile Word *) SA1101_p2v (_RhPortStatus)))
+#define USBStatus (*((volatile Word *) SA1101_p2v (_USBStatus)))
+#define USBReset (*((volatile Word *) SA1101_p2v (_USBReset)))
+#define USTAR (*((volatile Word *) SA1101_p2v (_USTAR)))
+#define USWER (*((volatile Word *) SA1101_p2v (_USWER)))
+#define USRFR (*((volatile Word *) SA1101_p2v (_USRFR)))
+#define USNFR (*((volatile Word *) SA1101_p2v (_USNFR)))
+#define USTCSR (*((volatile Word *) SA1101_p2v (_USTCSR)))
+#define USSR (*((volatile Word *) SA1101_p2v (_USSR)))
+
+
+#define USBStatus_IrqHciRmtWkp (1<<7)
+#define USBStatus_IrqHciBuffAcc (1<<8)
+#define USBStatus_nIrqHciM (1<<9)
+#define USBStatus_nHciMFClr (1<<10)
+
+#define USBReset_ForceIfReset 0x01
+#define USBReset_ForceHcReset 0x02
+#define USBReset_ClkGenReset 0x04
+
+#define USTCR_RdBstCntrl Fld(3,0)
+#define USTCR_ByteEnable Fld(4,3)
+#define USTCR_WriteEn (1<<7)
+#define USTCR_FifoCir (1<<8)
+#define USTCR_TestXferSel (1<<9)
+#define USTCR_FifoCirAtEnd (1<<10)
+#define USTCR_nSimScaleDownClk (1<<11)
+
+#define USSR_nAppMDEmpty 0x01
+#define USSR_nAppMDFirst 0x02
+#define USSR_nAppMDLast 0x04
+#define USSR_nAppMDFull 0x08
+#define USSR_nAppMAFull 0x10
+#define USSR_XferReq 0x20
+#define USSR_XferEnd 0x40
+
+#endif /* LANGUAGE == C */
+
+
+/*
+ * Interrupt Controller
+ *
+ * Registers
+ * INTTEST0 Test register 0
+ * INTTEST1 Test register 1
+ * INTENABLE0 Interrupt Enable register 0
+ * INTENABLE1 Interrupt Enable register 1
+ * INTPOL0 Interrupt Polarity selection 0
+ * INTPOL1 Interrupt Polarity selection 1
+ * INTTSTSEL Interrupt source selection
+ * INTSTATCLR0 Interrupt Status 0
+ * INTSTATCLR1 Interrupt Status 1
+ * INTSET0 Interrupt Set 0
+ * INTSET1 Interrupt Set 1
+ */
+
+#define _INT( x ) _SA1101( ( x ) + __INTERRUPT_CONTROL)
+
+#define _INTTEST0 _INT( 0x1000 )
+#define _INTTEST1 _INT( 0x1400 )
+#define _INTENABLE0 _INT( 0x2000 )
+#define _INTENABLE1 _INT( 0x2400 )
+#define _INTPOL0 _INT( 0x3000 )
+#define _INTPOL1 _INT( 0x3400 )
+#define _INTTSTSEL _INT( 0x5000 )
+#define _INTSTATCLR0 _INT( 0x6000 )
+#define _INTSTATCLR1 _INT( 0x6400 )
+#define _INTSET0 _INT( 0x7000 )
+#define _INTSET1 _INT( 0x7400 )
+
+#if ( LANGUAGE == C )
+#define INTTEST0 (*((volatile Word *) SA1101_p2v (_INTTEST0)))
+#define INTTEST1 (*((volatile Word *) SA1101_p2v (_INTTEST1)))
+#define INTENABLE0 (*((volatile Word *) SA1101_p2v (_INTENABLE0)))
+#define INTENABLE1 (*((volatile Word *) SA1101_p2v (_INTENABLE1)))
+#define INTPOL0 (*((volatile Word *) SA1101_p2v (_INTPOL0)))
+#define INTPOL1 (*((volatile Word *) SA1101_p2v (_INTPOL1)))
+#define INTTSTSEL (*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
+#define INTSTATCLR0 (*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
+#define INTSTATCLR1 (*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
+#define INTSET0 (*((volatile Word *) SA1101_p2v (_INTSET0)))
+#define INTSET1 (*((volatile Word *) SA1101_p2v (_INTSET1)))
+
+#endif /* LANGUAGE == C */
+
+/*
+ * PS/2 Trackpad and Mouse Interfaces
+ *
+ * Registers (prefix kbd applies to trackpad interface, mse to mouse)
+ * KBDCR Control Register
+ * KBDSTAT Status Register
+ * KBDDATA Transmit/Receive Data register
+ * KBDCLKDIV Clock Division Register
+ * KBDPRECNT Clock Precount Register
+ * KBDTEST1 Test register 1
+ * KBDTEST2 Test register 2
+ * KBDTEST3 Test register 3
+ * KBDTEST4 Test register 4
+ * MSECR
+ * MSESTAT
+ * MSEDATA
+ * MSECLKDIV
+ * MSEPRECNT
+ * MSETEST1
+ * MSETEST2
+ * MSETEST3
+ * MSETEST4
+ *
+ */
+
+#define _KBD( x ) _SA1101( ( x ) + __TRACK_INTERFACE )
+#define _MSE( x ) _SA1101( ( x ) + __MOUSE_INTERFACE )
+
+#define _KBDCR _KBD( 0x0000 )
+#define _KBDSTAT _KBD( 0x0400 )
+#define _KBDDATA _KBD( 0x0800 )
+#define _KBDCLKDIV _KBD( 0x0c00 )
+#define _KBDPRECNT _KBD( 0x1000 )
+#define _KBDTEST1 _KBD( 0x2000 )
+#define _KBDTEST2 _KBD( 0x2400 )
+#define _KBDTEST3 _KBD( 0x2800 )
+#define _KBDTEST4 _KBD( 0x2c00 )
+#define _MSECR _MSE( 0x0000 )
+#define _MSESTAT _MSE( 0x0400 )
+#define _MSEDATA _MSE( 0x0800 )
+#define _MSECLKDIV _MSE( 0x0c00 )
+#define _MSEPRECNT _MSE( 0x1000 )
+#define _MSETEST1 _MSE( 0x2000 )
+#define _MSETEST2 _MSE( 0x2400 )
+#define _MSETEST3 _MSE( 0x2800 )
+#define _MSETEST4 _MSE( 0x2c00 )
+
+#if ( LANGUAGE == C )
+
+#define KBDCR (*((volatile Word *) SA1101_p2v (_KBDCR)))
+#define KBDSTAT (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
+#define KBDDATA (*((volatile Word *) SA1101_p2v (_KBDDATA)))
+#define KBDCLKDIV (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
+#define KBDPRECNT (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
+#define KBDTEST1 (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
+#define KBDTEST2 (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
+#define KBDTEST3 (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
+#define KBDTEST4 (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
+#define MSECR (*((volatile Word *) SA1101_p2v (_MSECR)))
+#define MSESTAT (*((volatile Word *) SA1101_p2v (_MSESTAT)))
+#define MSEDATA (*((volatile Word *) SA1101_p2v (_MSEDATA)))
+#define MSECLKDIV (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
+#define MSEPRECNT (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
+#define MSETEST1 (*((volatile Word *) SA1101_p2v (_MSETEST1)))
+#define MSETEST2 (*((volatile Word *) SA1101_p2v (_MSETEST2)))
+#define MSETEST3 (*((volatile Word *) SA1101_p2v (_MSETEST3)))
+#define MSETEST4 (*((volatile Word *) SA1101_p2v (_MSETEST4)))
+
+
+#define KBDCR_ENA 0x08
+#define KBDCR_FKD 0x02
+#define KBDCR_FKC 0x01
+
+#define KBDSTAT_TXE 0x80
+#define KBDSTAT_TXB 0x40
+#define KBDSTAT_RXF 0x20
+#define KBDSTAT_RXB 0x10
+#define KBDSTAT_ENA 0x08
+#define KBDSTAT_RXP 0x04
+#define KBDSTAT_KBD 0x02
+#define KBDSTAT_KBC 0x01
+
+#define KBDCLKDIV_DivVal Fld(4,0)
+
+#define MSECR_ENA 0x08
+#define MSECR_FKD 0x02
+#define MSECR_FKC 0x01
+
+#define MSESTAT_TXE 0x80
+#define MSESTAT_TXB 0x40
+#define MSESTAT_RXF 0x20
+#define MSESTAT_RXB 0x10
+#define MSESTAT_ENA 0x08
+#define MSESTAT_RXP 0x04
+#define MSESTAT_MSD 0x02
+#define MSESTAT_MSC 0x01
+
+#define MSECLKDIV_DivVal Fld(4,0)
+
+#define KBDTEST1_CD 0x80
+#define KBDTEST1_RC1 0x40
+#define KBDTEST1_MC 0x20
+#define KBDTEST1_C Fld(2,3)
+#define KBDTEST1_T2 0x40
+#define KBDTEST1_T1 0x20
+#define KBDTEST1_T0 0x10
+#define KBDTEST2_TICBnRES 0x08
+#define KBDTEST2_RKC 0x04
+#define KBDTEST2_RKD 0x02
+#define KBDTEST2_SEL 0x01
+#define KBDTEST3_ms_16 0x80
+#define KBDTEST3_us_64 0x40
+#define KBDTEST3_us_16 0x20
+#define KBDTEST3_DIV8 0x10
+#define KBDTEST3_DIn 0x08
+#define KBDTEST3_CIn 0x04
+#define KBDTEST3_KD 0x02
+#define KBDTEST3_KC 0x01
+#define KBDTEST4_BC12 0x80
+#define KBDTEST4_BC11 0x40
+#define KBDTEST4_TRES 0x20
+#define KBDTEST4_CLKOE 0x10
+#define KBDTEST4_CRES 0x08
+#define KBDTEST4_RXB 0x04
+#define KBDTEST4_TXB 0x02
+#define KBDTEST4_SRX 0x01
+
+#define MSETEST1_CD 0x80
+#define MSETEST1_RC1 0x40
+#define MSETEST1_MC 0x20
+#define MSETEST1_C Fld(2,3)
+#define MSETEST1_T2 0x40
+#define MSETEST1_T1 0x20
+#define MSETEST1_T0 0x10
+#define MSETEST2_TICBnRES 0x08
+#define MSETEST2_RKC 0x04
+#define MSETEST2_RKD 0x02
+#define MSETEST2_SEL 0x01
+#define MSETEST3_ms_16 0x80
+#define MSETEST3_us_64 0x40
+#define MSETEST3_us_16 0x20
+#define MSETEST3_DIV8 0x10
+#define MSETEST3_DIn 0x08
+#define MSETEST3_CIn 0x04
+#define MSETEST3_KD 0x02
+#define MSETEST3_KC 0x01
+#define MSETEST4_BC12 0x80
+#define MSETEST4_BC11 0x40
+#define MSETEST4_TRES 0x20
+#define MSETEST4_CLKOE 0x10
+#define MSETEST4_CRES 0x08
+#define MSETEST4_RXB 0x04
+#define MSETEST4_TXB 0x02
+#define MSETEST4_SRX 0x01
+
+#endif /* LANGUAGE == C */
+
+
+/*
+ * General-Purpose I/O Interface
+ *
+ * Registers
+ * PADWR Port A Data Write Register
+ * PBDWR Port B Data Write Register
+ * PADRR Port A Data Read Register
+ * PBDRR Port B Data Read Register
+ * PADDR Port A Data Direction Register
+ * PBDDR Port B Data Direction Register
+ * PASSR Port A Sleep State Register
+ * PBSSR Port B Sleep State Register
+ *
+ */
+
+#define _PIO( x ) _SA1101( ( x ) + __GPIO_INTERFACE )
+
+#define _PADWR _PIO( 0x0000 )
+#define _PBDWR _PIO( 0x0400 )
+#define _PADRR _PIO( 0x0000 )
+#define _PBDRR _PIO( 0x0400 )
+#define _PADDR _PIO( 0x0800 )
+#define _PBDDR _PIO( 0x0c00 )
+#define _PASSR _PIO( 0x1000 )
+#define _PBSSR _PIO( 0x1400 )
+
+
+#if ( LANGUAGE == C )
+
+
+#define PADWR (*((volatile Word *) SA1101_p2v (_PADWR)))
+#define PBDWR (*((volatile Word *) SA1101_p2v (_PBDWR)))
+#define PADRR (*((volatile Word *) SA1101_p2v (_PADRR)))
+#define PBDRR (*((volatile Word *) SA1101_p2v (_PBDRR)))
+#define PADDR (*((volatile Word *) SA1101_p2v (_PADDR)))
+#define PBDDR (*((volatile Word *) SA1101_p2v (_PBDDR)))
+#define PASSR (*((volatile Word *) SA1101_p2v (_PASSR)))
+#define PBSSR (*((volatile Word *) SA1101_p2v (_PBSSR)))
+
+#endif
+
+
+
+/*
+ * Keypad Interface
+ *
+ * Registers
+ * PXDWR
+ * PXDRR
+ * PYDWR
+ * PYDRR
+ *
+ */
+
+#define _KEYPAD( x ) _SA1101( ( x ) + __KEYPAD_INTERFACE )
+
+#define _PXDWR _KEYPAD( 0x0000 )
+#define _PXDRR _KEYPAD( 0x0000 )
+#define _PYDWR _KEYPAD( 0x0400 )
+#define _PYDRR _KEYPAD( 0x0400 )
+
+#if ( LANGUAGE == C )
+
+
+#define PXDWR (*((volatile Word *) SA1101_p2v (_PXDWR)))
+#define PXDRR (*((volatile Word *) SA1101_p2v (_PXDRR)))
+#define PYDWR (*((volatile Word *) SA1101_p2v (_PYDWR)))
+#define PYDRR (*((volatile Word *) SA1101_p2v (_PYDRR)))
+
+#endif
+
+
+
+/*
+ * PCMCIA Interface
+ *
+ * Registers
+ * PCSR Status Register
+ * PCCR Control Register
+ * PCSSR Sleep State Register
+ *
+ */
+
+#define _CARD( x ) _SA1101( ( x ) + __PCMCIA_INTERFACE )
+
+#define _PCSR _CARD( 0x0000 )
+#define _PCCR _CARD( 0x0400 )
+#define _PCSSR _CARD( 0x0800 )
+
+#if ( LANGUAGE == C )
+#define PCSR (*((volatile Word *) SA1101_p2v (_PCSR)))
+#define PCCR (*((volatile Word *) SA1101_p2v (_PCCR)))
+#define PCSSR (*((volatile Word *) SA1101_p2v (_PCSSR)))
+
+#define PCSR_S0_ready 0x0001
+#define PCSR_S1_ready 0x0002
+#define PCSR_S0_detected 0x0004
+#define PCSR_S1_detected 0x0008
+#define PCSR_S0_VS1 0x0010
+#define PCSR_S0_VS2 0x0020
+#define PCSR_S1_VS1 0x0040
+#define PCSR_S1_VS2 0x0080
+#define PCSR_S0_WP 0x0100
+#define PCSR_S1_WP 0x0200
+#define PCSR_S0_BVD1_nSTSCHG 0x0400
+#define PCSR_S0_BVD2_nSPKR 0x0800
+#define PCSR_S1_BVD1_nSTSCHG 0x1000
+#define PCSR_S1_BVD2_nSPKR 0x2000
+
+#define PCCR_S0_VPP0 0x0001
+#define PCCR_S0_VPP1 0x0002
+#define PCCR_S0_VCC0 0x0004
+#define PCCR_S0_VCC1 0x0008
+#define PCCR_S1_VPP0 0x0010
+#define PCCR_S1_VPP1 0x0020
+#define PCCR_S1_VCC0 0x0040
+#define PCCR_S1_VCC1 0x0080
+#define PCCR_S0_reset 0x0100
+#define PCCR_S1_reset 0x0200
+#define PCCR_S0_float 0x0400
+#define PCCR_S1_float 0x0800
+
+#define PCSSR_S0_VCC0 0x0001
+#define PCSSR_S0_VCC1 0x0002
+#define PCSSR_S0_VPP0 0x0004
+#define PCSSR_S0_VPP1 0x0008
+#define PCSSR_S0_control 0x0010
+#define PCSSR_S1_VCC0 0x0020
+#define PCSSR_S1_VCC1 0x0040
+#define PCSSR_S1_VPP0 0x0080
+#define PCSSR_S1_VPP1 0x0100
+#define PCSSR_S1_control 0x0200
+
+#endif
+
+#undef C
+#undef Assembly
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1111.h b/arch/arm/mach-sa1100/include/mach/SA-1111.h
new file mode 100644
index 0000000..c38f609
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/SA-1111.h
@@ -0,0 +1,5 @@
+/*
+ * Moved to new location
+ */
+#warning using old SA-1111.h - update to <asm/hardware/sa1111.h>
+#include <asm/hardware/sa1111.h>
diff --git a/arch/arm/mach-sa1100/include/mach/assabet.h b/arch/arm/mach-sa1100/include/mach/assabet.h
new file mode 100644
index 0000000..3959b20
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/assabet.h
@@ -0,0 +1,105 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/assabet.h
+ *
+ * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ * Definitions for Neponset added.
+ */
+#ifndef __ASM_ARCH_ASSABET_H
+#define __ASM_ARCH_ASSABET_H
+
+
+/* System Configuration Register flags */
+
+#define ASSABET_SCR_SDRAM_LOW (1<<2) /* SDRAM size (low bit) */
+#define ASSABET_SCR_SDRAM_HIGH (1<<3) /* SDRAM size (high bit) */
+#define ASSABET_SCR_FLASH_LOW (1<<4) /* Flash size (low bit) */
+#define ASSABET_SCR_FLASH_HIGH (1<<5) /* Flash size (high bit) */
+#define ASSABET_SCR_GFX (1<<8) /* Graphics Accelerator (0 = present) */
+#define ASSABET_SCR_SA1111 (1<<9) /* Neponset (0 = present) */
+
+#define ASSABET_SCR_INIT -1
+
+extern unsigned long SCR_value;
+
+#ifdef CONFIG_ASSABET_NEPONSET
+#define machine_has_neponset() ((SCR_value & ASSABET_SCR_SA1111) == 0)
+#else
+#define machine_has_neponset() (0)
+#endif
+
+/* Board Control Register */
+
+#define ASSABET_BCR_BASE 0xf1000000
+#define ASSABET_BCR (*(volatile unsigned int *)(ASSABET_BCR_BASE))
+
+#define ASSABET_BCR_CF_PWR (1<<0) /* Compact Flash Power (1 = 3.3v, 0 = off) */
+#define ASSABET_BCR_CF_RST (1<<1) /* Compact Flash Reset (1 = power up reset) */
+#define ASSABET_BCR_GFX_RST (1<<1) /* Graphics Accelerator Reset (0 = hold reset) */
+#define ASSABET_BCR_CODEC_RST (1<<2) /* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */
+#define ASSABET_BCR_IRDA_FSEL (1<<3) /* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */
+#define ASSABET_BCR_IRDA_MD0 (1<<4) /* Range/Power select */
+#define ASSABET_BCR_IRDA_MD1 (1<<5) /* Range/Power select */
+#define ASSABET_BCR_STEREO_LB (1<<6) /* Stereo Loopback */
+#define ASSABET_BCR_CF_BUS_OFF (1<<7) /* Compact Flash bus (0 = on, 1 = off (float)) */
+#define ASSABET_BCR_AUDIO_ON (1<<8) /* Audio power on */
+#define ASSABET_BCR_LIGHT_ON (1<<9) /* Backlight */
+#define ASSABET_BCR_LCD_12RGB (1<<10) /* 0 = 16RGB, 1 = 12RGB */
+#define ASSABET_BCR_LCD_ON (1<<11) /* LCD power on */
+#define ASSABET_BCR_RS232EN (1<<12) /* RS232 transceiver enable */
+#define ASSABET_BCR_LED_RED (1<<13) /* D9 (0 = on, 1 = off) */
+#define ASSABET_BCR_LED_GREEN (1<<14) /* D8 (0 = on, 1 = off) */
+#define ASSABET_BCR_VIB_ON (1<<15) /* Vibration motor (quiet alert) */
+#define ASSABET_BCR_COM_DTR (1<<16) /* COMport Data Terminal Ready */
+#define ASSABET_BCR_COM_RTS (1<<17) /* COMport Request To Send */
+#define ASSABET_BCR_RAD_WU (1<<18) /* Radio wake up interrupt */
+#define ASSABET_BCR_SMB_EN (1<<19) /* System management bus enable */
+#define ASSABET_BCR_TV_IR_DEC (1<<20) /* TV IR Decode Enable (not implemented) */
+#define ASSABET_BCR_QMUTE (1<<21) /* Quick Mute */
+#define ASSABET_BCR_RAD_ON (1<<22) /* Radio Power On */
+#define ASSABET_BCR_SPK_OFF (1<<23) /* 1 = Speaker amplifier power off */
+
+#ifdef CONFIG_SA1100_ASSABET
+extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set);
+#else
+#define ASSABET_BCR_frob(x,y) do { } while (0)
+#endif
+
+#define ASSABET_BCR_set(x) ASSABET_BCR_frob((x), (x))
+#define ASSABET_BCR_clear(x) ASSABET_BCR_frob((x), 0)
+
+#define ASSABET_BSR_BASE 0xf1000000
+#define ASSABET_BSR (*(volatile unsigned int*)(ASSABET_BSR_BASE))
+
+#define ASSABET_BSR_RS232_VALID (1 << 24)
+#define ASSABET_BSR_COM_DCD (1 << 25)
+#define ASSABET_BSR_COM_CTS (1 << 26)
+#define ASSABET_BSR_COM_DSR (1 << 27)
+#define ASSABET_BSR_RAD_CTS (1 << 28)
+#define ASSABET_BSR_RAD_DSR (1 << 29)
+#define ASSABET_BSR_RAD_DCD (1 << 30)
+#define ASSABET_BSR_RAD_RI (1 << 31)
+
+
+/* GPIOs for which the generic definition doesn't say much */
+#define ASSABET_GPIO_RADIO_IRQ GPIO_GPIO (14) /* Radio interrupt request */
+#define ASSABET_GPIO_PS_MODE_SYNC GPIO_GPIO (16) /* Power supply mode/sync */
+#define ASSABET_GPIO_STEREO_64FS_CLK GPIO_GPIO (19) /* SSP UDA1341 clock input */
+#define ASSABET_GPIO_CF_IRQ GPIO_GPIO (21) /* CF IRQ */
+#define ASSABET_GPIO_CF_CD GPIO_GPIO (22) /* CF CD */
+#define ASSABET_GPIO_CF_BVD2 GPIO_GPIO (24) /* CF BVD */
+#define ASSABET_GPIO_GFX_IRQ GPIO_GPIO (24) /* Graphics IRQ */
+#define ASSABET_GPIO_CF_BVD1 GPIO_GPIO (25) /* CF BVD */
+#define ASSABET_GPIO_BATT_LOW GPIO_GPIO (26) /* Low battery */
+#define ASSABET_GPIO_RCLK GPIO_GPIO (26) /* CCLK/2 */
+
+#define ASSABET_IRQ_GPIO_CF_IRQ IRQ_GPIO21
+#define ASSABET_IRQ_GPIO_CF_CD IRQ_GPIO22
+#define ASSABET_IRQ_GPIO_CF_BVD2 IRQ_GPIO24
+#define ASSABET_IRQ_GPIO_CF_BVD1 IRQ_GPIO25
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/badge4.h b/arch/arm/mach-sa1100/include/mach/badge4.h
new file mode 100644
index 0000000..44d2e1b
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/badge4.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/badge4.h
+ *
+ * Tim Connors <connors@hpl.hp.com>
+ * Christopher Hoover <ch@hpl.hp.com>
+ *
+ * Copyright (C) 2002 Hewlett-Packard Company
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error "include <mach/hardware.h> instead"
+#endif
+
+#define BADGE4_SA1111_BASE (0x48000000)
+
+/* GPIOs on the BadgePAD 4 */
+#define BADGE4_GPIO_INT_1111 GPIO_GPIO0 /* SA-1111 IRQ */
+
+#define BADGE4_GPIO_INT_VID GPIO_GPIO1 /* Video expansion */
+#define BADGE4_GPIO_LGP2 GPIO_GPIO2 /* GPIO_LDD8 */
+#define BADGE4_GPIO_LGP3 GPIO_GPIO3 /* GPIO_LDD9 */
+#define BADGE4_GPIO_LGP4 GPIO_GPIO4 /* GPIO_LDD10 */
+#define BADGE4_GPIO_LGP5 GPIO_GPIO5 /* GPIO_LDD11 */
+#define BADGE4_GPIO_LGP6 GPIO_GPIO6 /* GPIO_LDD12 */
+#define BADGE4_GPIO_LGP7 GPIO_GPIO7 /* GPIO_LDD13 */
+#define BADGE4_GPIO_LGP8 GPIO_GPIO8 /* GPIO_LDD14 */
+#define BADGE4_GPIO_LGP9 GPIO_GPIO9 /* GPIO_LDD15 */
+#define BADGE4_GPIO_GPA_VID GPIO_GPIO10 /* Video expansion */
+#define BADGE4_GPIO_GPB_VID GPIO_GPIO11 /* Video expansion */
+#define BADGE4_GPIO_GPC_VID GPIO_GPIO12 /* Video expansion */
+
+#define BADGE4_GPIO_UART_HS1 GPIO_GPIO13
+#define BADGE4_GPIO_UART_HS2 GPIO_GPIO14
+
+#define BADGE4_GPIO_MUXSEL0 GPIO_GPIO15
+#define BADGE4_GPIO_TESTPT_J7 GPIO_GPIO16
+
+#define BADGE4_GPIO_SDSDA GPIO_GPIO17 /* SDRAM SPD Data */
+#define BADGE4_GPIO_SDSCL GPIO_GPIO18 /* SDRAM SPD Clock */
+#define BADGE4_GPIO_SDTYP0 GPIO_GPIO19 /* SDRAM Type Control */
+#define BADGE4_GPIO_SDTYP1 GPIO_GPIO20 /* SDRAM Type Control */
+
+#define BADGE4_GPIO_BGNT_1111 GPIO_GPIO21 /* GPIO_MBGNT */
+#define BADGE4_GPIO_BREQ_1111 GPIO_GPIO22 /* GPIO_TREQA */
+
+#define BADGE4_GPIO_TESTPT_J6 GPIO_GPIO23
+
+#define BADGE4_GPIO_PCMEN5V GPIO_GPIO24 /* 5V power */
+
+#define BADGE4_GPIO_SA1111_NRST GPIO_GPIO25 /* SA-1111 nRESET */
+
+#define BADGE4_GPIO_TESTPT_J5 GPIO_GPIO26
+
+#define BADGE4_GPIO_CLK_1111 GPIO_GPIO27 /* GPIO_32_768kHz */
+
+/* Interrupts on the BadgePAD 4 */
+#define BADGE4_IRQ_GPIO_SA1111 IRQ_GPIO0 /* SA-1111 interrupt */
+
+
+/* PCM5ENV Usage tracking */
+
+#define BADGE4_5V_PCMCIA_SOCK0 (1<<0)
+#define BADGE4_5V_PCMCIA_SOCK1 (1<<1)
+#define BADGE4_5V_PCMCIA_SOCK(n) (1<<(n))
+#define BADGE4_5V_USB (1<<2)
+#define BADGE4_5V_INITIALLY (1<<3)
+
+#ifndef __ASSEMBLY__
+extern void badge4_set_5V(unsigned subsystem, int on);
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/bitfield.h b/arch/arm/mach-sa1100/include/mach/bitfield.h
new file mode 100644
index 0000000..f1f0e33
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/bitfield.h
@@ -0,0 +1,113 @@
+/*
+ * FILE bitfield.h
+ *
+ * Version 1.1
+ * Author Copyright (c) Marc A. Viredaz, 1998
+ * DEC Western Research Laboratory, Palo Alto, CA
+ * Date April 1998 (April 1997)
+ * System Advanced RISC Machine (ARM)
+ * Language C or ARM Assembly
+ * Purpose Definition of macros to operate on bit fields.
+ */
+
+
+
+#ifndef __BITFIELD_H
+#define __BITFIELD_H
+
+#ifndef __ASSEMBLY__
+#define UData(Data) ((unsigned long) (Data))
+#else
+#define UData(Data) (Data)
+#endif
+
+
+/*
+ * MACRO: Fld
+ *
+ * Purpose
+ * The macro "Fld" encodes a bit field, given its size and its shift value
+ * with respect to bit 0.
+ *
+ * Note
+ * A more intuitive way to encode bit fields would have been to use their
+ * mask. However, extracting size and shift value information from a bit
+ * field's mask is cumbersome and might break the assembler (255-character
+ * line-size limit).
+ *
+ * Input
+ * Size Size of the bit field, in number of bits.
+ * Shft Shift value of the bit field with respect to bit 0.
+ *
+ * Output
+ * Fld Encoded bit field.
+ */
+
+#define Fld(Size, Shft) (((Size) << 16) + (Shft))
+
+
+/*
+ * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
+ *
+ * Purpose
+ * The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
+ * the size, shift value, mask, aligned mask, and first bit of a
+ * bit field.
+ *
+ * Input
+ * Field Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ * FSize Size of the bit field, in number of bits.
+ * FShft Shift value of the bit field with respect to bit 0.
+ * FMsk Mask for the bit field.
+ * FAlnMsk Mask for the bit field, aligned on bit 0.
+ * F1stBit First bit of the bit field.
+ */
+
+#define FSize(Field) ((Field) >> 16)
+#define FShft(Field) ((Field) & 0x0000FFFF)
+#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field) (UData (1) << FShft (Field))
+
+
+/*
+ * MACRO: FInsrt
+ *
+ * Purpose
+ * The macro "FInsrt" inserts a value into a bit field by shifting the
+ * former appropriately.
+ *
+ * Input
+ * Value Bit-field value.
+ * Field Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ * FInsrt Bit-field value positioned appropriately.
+ */
+
+#define FInsrt(Value, Field) \
+ (UData (Value) << FShft (Field))
+
+
+/*
+ * MACRO: FExtr
+ *
+ * Purpose
+ * The macro "FExtr" extracts the value of a bit field by masking and
+ * shifting it appropriately.
+ *
+ * Input
+ * Data Data containing the bit-field to be extracted.
+ * Field Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ * FExtr Bit-field value.
+ */
+
+#define FExtr(Data, Field) \
+ ((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
+
+
+#endif /* __BITFIELD_H */
diff --git a/arch/arm/mach-sa1100/include/mach/cerf.h b/arch/arm/mach-sa1100/include/mach/cerf.h
new file mode 100644
index 0000000..c3ac3d0
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/cerf.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/cerf.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Apr-2003 : Removed some old PDA crud [FB]
+ */
+#ifndef _INCLUDE_CERF_H_
+#define _INCLUDE_CERF_H_
+
+
+#define CERF_ETH_IO 0xf0000000
+#define CERF_ETH_IRQ IRQ_GPIO26
+
+#define CERF_GPIO_CF_BVD2 GPIO_GPIO (19)
+#define CERF_GPIO_CF_BVD1 GPIO_GPIO (20)
+#define CERF_GPIO_CF_RESET GPIO_GPIO (21)
+#define CERF_GPIO_CF_IRQ GPIO_GPIO (22)
+#define CERF_GPIO_CF_CD GPIO_GPIO (23)
+
+#define CERF_IRQ_GPIO_CF_BVD2 IRQ_GPIO19
+#define CERF_IRQ_GPIO_CF_BVD1 IRQ_GPIO20
+#define CERF_IRQ_GPIO_CF_IRQ IRQ_GPIO22
+#define CERF_IRQ_GPIO_CF_CD IRQ_GPIO23
+
+#endif // _INCLUDE_CERF_H_
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
new file mode 100644
index 0000000..69e9624
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/collie.h
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * ChangeLog:
+ * 04-06-2001 Lineo Japan, Inc.
+ * 04-16-2001 SHARP Corporation
+ * 07-07-2002 Chris Larson <clarson@digi.com>
+ *
+ */
+#ifndef __ASM_ARCH_COLLIE_H
+#define __ASM_ARCH_COLLIE_H
+
+
+#define COLLIE_SCP_CHARGE_ON SCOOP_GPCR_PA11
+#define COLLIE_SCP_DIAG_BOOT1 SCOOP_GPCR_PA12
+#define COLLIE_SCP_DIAG_BOOT2 SCOOP_GPCR_PA13
+#define COLLIE_SCP_MUTE_L SCOOP_GPCR_PA14
+#define COLLIE_SCP_MUTE_R SCOOP_GPCR_PA15
+#define COLLIE_SCP_5VON SCOOP_GPCR_PA16
+#define COLLIE_SCP_AMP_ON SCOOP_GPCR_PA17
+#define COLLIE_SCP_VPEN SCOOP_GPCR_PA18
+#define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19
+
+#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+ COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
+ COLLIE_SCP_LB_VOL_CHG )
+#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
+ COLLIE_SCP_CHARGE_ON )
+
+/* GPIOs for which the generic definition doesn't say much */
+
+#define COLLIE_GPIO_ON_KEY GPIO_GPIO (0)
+#define COLLIE_GPIO_AC_IN GPIO_GPIO (1)
+#define COLLIE_GPIO_SDIO_INT GPIO_GPIO (11)
+#define COLLIE_GPIO_CF_IRQ GPIO_GPIO (14)
+#define COLLIE_GPIO_nREMOCON_INT GPIO_GPIO (15)
+#define COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO (16)
+#define COLLIE_GPIO_nMIC_ON GPIO_GPIO (17)
+#define COLLIE_GPIO_nREMOCON_ON GPIO_GPIO (18)
+#define COLLIE_GPIO_CO GPIO_GPIO (20)
+#define COLLIE_GPIO_MCP_CLK GPIO_GPIO (21)
+#define COLLIE_GPIO_CF_CD GPIO_GPIO (22)
+#define COLLIE_GPIO_UCB1x00_IRQ GPIO_GPIO (23)
+#define COLLIE_GPIO_WAKEUP GPIO_GPIO (24)
+#define COLLIE_GPIO_GA_INT GPIO_GPIO (25)
+#define COLLIE_GPIO_MAIN_BAT_LOW GPIO_GPIO (26)
+
+/* Interrupts */
+
+#define COLLIE_IRQ_GPIO_ON_KEY IRQ_GPIO0
+#define COLLIE_IRQ_GPIO_AC_IN IRQ_GPIO1
+#define COLLIE_IRQ_GPIO_SDIO_IRQ IRQ_GPIO11
+#define COLLIE_IRQ_GPIO_CF_IRQ IRQ_GPIO14
+#define COLLIE_IRQ_GPIO_nREMOCON_INT IRQ_GPIO15
+#define COLLIE_IRQ_GPIO_CO IRQ_GPIO20
+#define COLLIE_IRQ_GPIO_CF_CD IRQ_GPIO22
+#define COLLIE_IRQ_GPIO_UCB1x00_IRQ IRQ_GPIO23
+#define COLLIE_IRQ_GPIO_WAKEUP IRQ_GPIO24
+#define COLLIE_IRQ_GPIO_GA_INT IRQ_GPIO25
+#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO26
+
+#define COLLIE_LCM_IRQ_GPIO_RTS IRQ_LOCOMO_GPIO0
+#define COLLIE_LCM_IRQ_GPIO_CTS IRQ_LOCOMO_GPIO1
+#define COLLIE_LCM_IRQ_GPIO_DSR IRQ_LOCOMO_GPIO2
+#define COLLIE_LCM_IRQ_GPIO_DTR IRQ_LOCOMO_GPIO3
+#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT IRQ_LOCOMO_GPIO13
+#define COLLIE_LCM_IRQ_GPIO_nSD_WP IRQ_LOCOMO_GPIO14
+
+/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
+#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0 /* GPIO0=Version */
+#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1 /* GPIO1=TBL_CHK */
+#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2 /* GPIO2=VPNE_ON */
+#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3 /* GPIO3=IR_ON */
+#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4 /* GPIO4=AMP_ON */
+#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5 /* GPIO5=Version */
+#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5 /* GPIO5=fs 8k LPF */
+#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6 /* GPIO6=BUZZER BIAS */
+#define COLLIE_TC35143_GPIO_MBAT_ON UCB_IO_7 /* GPIO7=MBAT_ON */
+#define COLLIE_TC35143_GPIO_BBAT_ON UCB_IO_8 /* GPIO8=BBAT_ON */
+#define COLLIE_TC35143_GPIO_TMP_ON UCB_IO_9 /* GPIO9=TMP_ON */
+#define COLLIE_TC35143_GPIO_IN ( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
+#define COLLIE_TC35143_GPIO_OUT ( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
+ UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
new file mode 100644
index 0000000..1f0634d
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -0,0 +1,58 @@
+/* arch/arm/mach-sa1100/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+#include <mach/hardware.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x80000000 @ physical base address
+ movne \rx, #0xf8000000 @ virtual address
+
+ @ We probe for the active serial port here, coherently with
+ @ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
+ @ We assume r1 can be clobbered.
+
+ @ see if Ser3 is active
+ add \rx, \rx, #0x00050000
+ ldr r1, [\rx, #UTCR3]
+ tst r1, #UTCR3_TXE
+
+ @ if Ser3 is inactive, then try Ser1
+ addeq \rx, \rx, #(0x00010000 - 0x00050000)
+ ldreq r1, [\rx, #UTCR3]
+ tsteq r1, #UTCR3_TXE
+
+ @ if Ser1 is inactive, then try Ser2
+ addeq \rx, \rx, #(0x00030000 - 0x00010000)
+ ldreq r1, [\rx, #UTCR3]
+ tsteq r1, #UTCR3_TXE
+
+ @ if all ports are inactive, then there is nothing we can do
+ moveq pc, lr
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UTDR]
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #UTSR1]
+ tst \rd, #UTSR1_TNF
+ beq 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #UTSR1]
+ tst \rd, #UTSR1_TBY
+ bne 1001b
+ .endm
diff --git a/arch/arm/mach-sa1100/include/mach/dma.h b/arch/arm/mach-sa1100/include/mach/dma.h
new file mode 100644
index 0000000..dda1b35
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/dma.h
@@ -0,0 +1,117 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/dma.h
+ *
+ * Generic SA1100 DMA support
+ *
+ * Copyright (C) 2000 Nicolas Pitre
+ *
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include "hardware.h"
+
+
+/*
+ * The SA1100 has six internal DMA channels.
+ */
+#define SA1100_DMA_CHANNELS 6
+
+/*
+ * Maximum physical DMA buffer size
+ */
+#define MAX_DMA_SIZE 0x1fff
+#define CUT_DMA_SIZE 0x1000
+
+/*
+ * All possible SA1100 devices a DMA channel can be attached to.
+ */
+typedef enum {
+ DMA_Ser0UDCWr = DDAR_Ser0UDCWr, /* Ser. port 0 UDC Write */
+ DMA_Ser0UDCRd = DDAR_Ser0UDCRd, /* Ser. port 0 UDC Read */
+ DMA_Ser1UARTWr = DDAR_Ser1UARTWr, /* Ser. port 1 UART Write */
+ DMA_Ser1UARTRd = DDAR_Ser1UARTRd, /* Ser. port 1 UART Read */
+ DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr, /* Ser. port 1 SDLC Write */
+ DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd, /* Ser. port 1 SDLC Read */
+ DMA_Ser2UARTWr = DDAR_Ser2UARTWr, /* Ser. port 2 UART Write */
+ DMA_Ser2UARTRd = DDAR_Ser2UARTRd, /* Ser. port 2 UART Read */
+ DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr, /* Ser. port 2 HSSP Write */
+ DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd, /* Ser. port 2 HSSP Read */
+ DMA_Ser3UARTWr = DDAR_Ser3UARTWr, /* Ser. port 3 UART Write */
+ DMA_Ser3UARTRd = DDAR_Ser3UARTRd, /* Ser. port 3 UART Read */
+ DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr, /* Ser. port 4 MCP 0 Write (audio) */
+ DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd, /* Ser. port 4 MCP 0 Read (audio) */
+ DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr, /* Ser. port 4 MCP 1 Write */
+ DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd, /* Ser. port 4 MCP 1 Read */
+ DMA_Ser4SSPWr = DDAR_Ser4SSPWr, /* Ser. port 4 SSP Write (16 bits) */
+ DMA_Ser4SSPRd = DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */
+} dma_device_t;
+
+typedef struct {
+ volatile u_long DDAR;
+ volatile u_long SetDCSR;
+ volatile u_long ClrDCSR;
+ volatile u_long RdDCSR;
+ volatile dma_addr_t DBSA;
+ volatile u_long DBTA;
+ volatile dma_addr_t DBSB;
+ volatile u_long DBTB;
+} dma_regs_t;
+
+typedef void (*dma_callback_t)(void *data);
+
+/*
+ * DMA function prototypes
+ */
+
+extern int sa1100_request_dma( dma_device_t device, const char *device_id,
+ dma_callback_t callback, void *data,
+ dma_regs_t **regs );
+extern void sa1100_free_dma( dma_regs_t *regs );
+extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size );
+extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs);
+extern void sa1100_reset_dma(dma_regs_t *regs);
+
+/**
+ * sa1100_stop_dma - stop DMA in progress
+ * @regs: identifier for the channel to use
+ *
+ * This stops DMA without clearing buffer pointers. Unlike
+ * sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma()
+ * or sa1100_get_dma_pos().
+ *
+ * The @regs identifier is provided by a successful call to
+ * sa1100_request_dma().
+ **/
+
+#define sa1100_stop_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN)
+
+/**
+ * sa1100_resume_dma - resume DMA on a stopped channel
+ * @regs: identifier for the channel to use
+ *
+ * This resumes DMA on a channel previously stopped with
+ * sa1100_stop_dma().
+ *
+ * The @regs identifier is provided by a successful call to
+ * sa1100_request_dma().
+ **/
+
+#define sa1100_resume_dma(regs) ((regs)->SetDCSR = DCSR_IE|DCSR_RUN)
+
+/**
+ * sa1100_clear_dma - clear DMA pointers
+ * @regs: identifier for the channel to use
+ *
+ * This clear any DMA state so the DMA engine is ready to restart
+ * with new buffers through sa1100_start_dma(). Any buffers in flight
+ * are discarded.
+ *
+ * The @regs identifier is provided by a successful call to
+ * sa1100_request_dma().
+ **/
+
+#define sa1100_clear_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-sa1100/include/mach/entry-macro.S b/arch/arm/mach-sa1100/include/mach/entry-macro.S
new file mode 100644
index 0000000..6aa13c4
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/entry-macro.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for SA1100-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ mov \base, #0xfa000000 @ ICIP = 0xfa050000
+ add \base, \base, #0x00050000
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, [\base] @ get irqs
+ ldr \irqnr, [\base, #4] @ ICMR = 0xfa050004
+ ands \irqstat, \irqstat, \irqnr
+ mov \irqnr, #0
+ beq 1001f
+ tst \irqstat, #0xff
+ moveq \irqstat, \irqstat, lsr #8
+ addeq \irqnr, \irqnr, #8
+ tsteq \irqstat, #0xff
+ moveq \irqstat, \irqstat, lsr #8
+ addeq \irqnr, \irqnr, #8
+ tsteq \irqstat, #0xff
+ moveq \irqstat, \irqstat, lsr #8
+ addeq \irqnr, \irqnr, #8
+ tst \irqstat, #0x0f
+ moveq \irqstat, \irqstat, lsr #4
+ addeq \irqnr, \irqnr, #4
+ tst \irqstat, #0x03
+ moveq \irqstat, \irqstat, lsr #2
+ addeq \irqnr, \irqnr, #2
+ tst \irqstat, #0x01
+ addeqs \irqnr, \irqnr, #1
+1001:
+ .endm
+
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
new file mode 100644
index 0000000..582a0c9
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/gpio.h
+ *
+ * SA1100 GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_SA1100_GPIO_H
+#define __ASM_ARCH_SA1100_GPIO_H
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+ return GPLR & GPIO_GPIO(gpio);
+ else
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+ if (value)
+ GPSR = GPIO_GPIO(gpio);
+ else
+ GPCR = GPIO_GPIO(gpio);
+ else
+ __gpio_set_value(gpio, value);
+}
+
+#define gpio_cansleep __gpio_cansleep
+
+static inline unsigned gpio_to_irq(unsigned gpio)
+{
+ if (gpio < 11)
+ return IRQ_GPIO0 + gpio;
+ else
+ return IRQ_GPIO11 - 11 + gpio;
+}
+
+static inline unsigned irq_to_gpio(unsigned irq)
+{
+ if (irq < IRQ_GPIO11_27)
+ return irq - IRQ_GPIO0;
+ else
+ return irq - IRQ_GPIO11 + 11;
+}
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
new file mode 100644
index 0000000..3ca0ecf
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/h3600.h
@@ -0,0 +1,169 @@
+/*
+ *
+ * Definitions for H3600 Handheld Computer
+ *
+ * Copyright 2000 Compaq Computer Corporation.
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks.
+ *
+ * History:
+ *
+ * 2001-10-?? Andrew Christian Added support for iPAQ H3800
+ *
+ */
+
+#ifndef _INCLUDE_H3600_H_
+#define _INCLUDE_H3600_H_
+
+typedef int __bitwise pm_request_t;
+
+#define PM_SUSPEND ((__force pm_request_t) 1) /* enter D1-D3 */
+#define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */
+
+/* generalized support for H3xxx series Compaq Pocket PC's */
+#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
+
+/* Physical memory regions corresponding to chip selects */
+#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS SA1100_CS4_PHYS
+
+/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
+#define H3600_EGPIO_VIRT 0xf0000000
+#define H3600_BANK_2_VIRT 0xf1000000
+#define H3600_BANK_4_VIRT 0xf3800000
+
+/*
+ Machine-independent GPIO definitions
+ --- these are common across all current iPAQ platforms
+*/
+
+#define GPIO_H3600_NPOWER_BUTTON GPIO_GPIO (0) /* Also known as the "off button" */
+
+#define GPIO_H3600_PCMCIA_CD1 GPIO_GPIO (10)
+#define GPIO_H3600_PCMCIA_IRQ1 GPIO_GPIO (11)
+
+/* UDA1341 L3 Interface */
+#define GPIO_H3600_L3_DATA GPIO_GPIO (14)
+#define GPIO_H3600_L3_MODE GPIO_GPIO (15)
+#define GPIO_H3600_L3_CLOCK GPIO_GPIO (16)
+
+#define GPIO_H3600_PCMCIA_CD0 GPIO_GPIO (17)
+#define GPIO_H3600_SYS_CLK GPIO_GPIO (19)
+#define GPIO_H3600_PCMCIA_IRQ0 GPIO_GPIO (21)
+
+#define GPIO_H3600_COM_DCD GPIO_GPIO (23)
+#define GPIO_H3600_OPT_IRQ GPIO_GPIO (24)
+#define GPIO_H3600_COM_CTS GPIO_GPIO (25)
+#define GPIO_H3600_COM_RTS GPIO_GPIO (26)
+
+#define IRQ_GPIO_H3600_NPOWER_BUTTON IRQ_GPIO0
+#define IRQ_GPIO_H3600_PCMCIA_CD1 IRQ_GPIO10
+#define IRQ_GPIO_H3600_PCMCIA_IRQ1 IRQ_GPIO11
+#define IRQ_GPIO_H3600_PCMCIA_CD0 IRQ_GPIO17
+#define IRQ_GPIO_H3600_PCMCIA_IRQ0 IRQ_GPIO21
+#define IRQ_GPIO_H3600_COM_DCD IRQ_GPIO23
+#define IRQ_GPIO_H3600_OPT_IRQ IRQ_GPIO24
+#define IRQ_GPIO_H3600_COM_CTS IRQ_GPIO25
+
+
+#ifndef __ASSEMBLY__
+
+enum ipaq_egpio_type {
+ IPAQ_EGPIO_LCD_POWER, /* Power to the LCD panel */
+ IPAQ_EGPIO_CODEC_NRESET, /* Clear to reset the audio codec (remember to return high) */
+ IPAQ_EGPIO_AUDIO_ON, /* Audio power */
+ IPAQ_EGPIO_QMUTE, /* Audio muting */
+ IPAQ_EGPIO_OPT_NVRAM_ON, /* Non-volatile RAM on extension sleeves (SPI interface) */
+ IPAQ_EGPIO_OPT_ON, /* Power to extension sleeves */
+ IPAQ_EGPIO_CARD_RESET, /* Reset PCMCIA cards on extension sleeve (???) */
+ IPAQ_EGPIO_OPT_RESET, /* Reset option pack (???) */
+ IPAQ_EGPIO_IR_ON, /* IR sensor/emitter power */
+ IPAQ_EGPIO_IR_FSEL, /* IR speed selection 1->fast, 0->slow */
+ IPAQ_EGPIO_RS232_ON, /* Maxim RS232 chip power */
+ IPAQ_EGPIO_VPP_ON, /* Turn on power to flash programming */
+ IPAQ_EGPIO_LCD_ENABLE, /* Enable/disable LCD controller */
+};
+
+struct ipaq_model_ops {
+ const char *generic_name;
+ void (*control)(enum ipaq_egpio_type, int);
+ unsigned long (*read)(void);
+ void (*blank_callback)(int blank);
+ int (*pm_callback)(int req); /* Primary model callback */
+ int (*pm_callback_aux)(int req); /* Secondary callback (used by HAL modules) */
+};
+
+extern struct ipaq_model_ops ipaq_model_ops;
+
+static __inline__ const char * h3600_generic_name(void)
+{
+ return ipaq_model_ops.generic_name;
+}
+
+static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level)
+{
+ if (ipaq_model_ops.control)
+ ipaq_model_ops.control(x,level);
+}
+
+static __inline__ void clr_h3600_egpio(enum ipaq_egpio_type x)
+{
+ if (ipaq_model_ops.control)
+ ipaq_model_ops.control(x,0);
+}
+
+static __inline__ void set_h3600_egpio(enum ipaq_egpio_type x)
+{
+ if (ipaq_model_ops.control)
+ ipaq_model_ops.control(x,1);
+}
+
+static __inline__ unsigned long read_h3600_egpio(void)
+{
+ if (ipaq_model_ops.read)
+ return ipaq_model_ops.read();
+ return 0;
+}
+
+static __inline__ int h3600_register_blank_callback(void (*f)(int))
+{
+ ipaq_model_ops.blank_callback = f;
+ return 0;
+}
+
+static __inline__ void h3600_unregister_blank_callback(void (*f)(int))
+{
+ ipaq_model_ops.blank_callback = NULL;
+}
+
+
+static __inline__ int h3600_register_pm_callback(int (*f)(int))
+{
+ ipaq_model_ops.pm_callback_aux = f;
+ return 0;
+}
+
+static __inline__ void h3600_unregister_pm_callback(int (*f)(int))
+{
+ ipaq_model_ops.pm_callback_aux = NULL;
+}
+
+static __inline__ int h3600_power_management(int req)
+{
+ if (ipaq_model_ops.pm_callback)
+ return ipaq_model_ops.pm_callback(req);
+ return 0;
+}
+
+#endif /* ASSEMBLY */
+
+#endif /* _INCLUDE_H3600_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
new file mode 100644
index 0000000..62b0b78
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
@@ -0,0 +1,540 @@
+/*
+ *
+ * Definitions for H3600 Handheld Computer
+ *
+ * Copyright 2000 Compaq Computer Corporation.
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks.
+ *
+ * History:
+ *
+ * 2001-10-?? Andrew Christian Added support for iPAQ H3800
+ *
+ */
+
+#ifndef _INCLUDE_H3600_GPIO_H_
+#define _INCLUDE_H3600_GPIO_H_
+
+/*
+ * GPIO lines that are common across ALL iPAQ models are in "h3600.h"
+ * This file contains machine-specific definitions
+ */
+
+#define GPIO_H3600_SUSPEND GPIO_GPIO (0)
+/* GPIO[2:9] used by LCD on H3600/3800, used as GPIO on H3100 */
+#define GPIO_H3100_BT_ON GPIO_GPIO (2)
+#define GPIO_H3100_GPIO3 GPIO_GPIO (3)
+#define GPIO_H3100_QMUTE GPIO_GPIO (4)
+#define GPIO_H3100_LCD_3V_ON GPIO_GPIO (5)
+#define GPIO_H3100_AUD_ON GPIO_GPIO (6)
+#define GPIO_H3100_AUD_PWR_ON GPIO_GPIO (7)
+#define GPIO_H3100_IR_ON GPIO_GPIO (8)
+#define GPIO_H3100_IR_FSEL GPIO_GPIO (9)
+
+/* for H3600, audio sample rate clock generator */
+#define GPIO_H3600_CLK_SET0 GPIO_GPIO (12)
+#define GPIO_H3600_CLK_SET1 GPIO_GPIO (13)
+
+#define GPIO_H3600_ACTION_BUTTON GPIO_GPIO (18)
+#define GPIO_H3600_SOFT_RESET GPIO_GPIO (20) /* Also known as BATT_FAULT */
+#define GPIO_H3600_OPT_LOCK GPIO_GPIO (22)
+#define GPIO_H3600_OPT_DET GPIO_GPIO (27)
+
+/* H3800 specific pins */
+#define GPIO_H3800_AC_IN GPIO_GPIO (12)
+#define GPIO_H3800_COM_DSR GPIO_GPIO (13)
+#define GPIO_H3800_MMC_INT GPIO_GPIO (18)
+#define GPIO_H3800_NOPT_IND GPIO_GPIO (20) /* Almost exactly the same as GPIO_H3600_OPT_DET */
+#define GPIO_H3800_OPT_BAT_FAULT GPIO_GPIO (22)
+#define GPIO_H3800_CLK_OUT GPIO_GPIO (27)
+
+/****************************************************/
+
+#define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18
+#define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27
+
+#define IRQ_GPIO_H3800_MMC_INT IRQ_GPIO18
+#define IRQ_GPIO_H3800_NOPT_IND IRQ_GPIO20 /* almost same as OPT_DET */
+
+/* H3100 / 3600 EGPIO pins */
+#define EGPIO_H3600_VPP_ON (1 << 0)
+#define EGPIO_H3600_CARD_RESET (1 << 1) /* reset the attached pcmcia/compactflash card. active high. */
+#define EGPIO_H3600_OPT_RESET (1 << 2) /* reset the attached option pack. active high. */
+#define EGPIO_H3600_CODEC_NRESET (1 << 3) /* reset the onboard UDA1341. active low. */
+#define EGPIO_H3600_OPT_NVRAM_ON (1 << 4) /* apply power to optionpack nvram, active high. */
+#define EGPIO_H3600_OPT_ON (1 << 5) /* full power to option pack. active high. */
+#define EGPIO_H3600_LCD_ON (1 << 6) /* enable 3.3V to LCD. active high. */
+#define EGPIO_H3600_RS232_ON (1 << 7) /* UART3 transceiver force on. Active high. */
+
+/* H3600 only EGPIO pins */
+#define EGPIO_H3600_LCD_PCI (1 << 8) /* LCD control IC enable. active high. */
+#define EGPIO_H3600_IR_ON (1 << 9) /* apply power to IR module. active high. */
+#define EGPIO_H3600_AUD_AMP_ON (1 << 10) /* apply power to audio power amp. active high. */
+#define EGPIO_H3600_AUD_PWR_ON (1 << 11) /* apply power to reset of audio circuit. active high. */
+#define EGPIO_H3600_QMUTE (1 << 12) /* mute control for onboard UDA1341. active high. */
+#define EGPIO_H3600_IR_FSEL (1 << 13) /* IR speed select: 1->fast, 0->slow */
+#define EGPIO_H3600_LCD_5V_ON (1 << 14) /* enable 5V to LCD. active high. */
+#define EGPIO_H3600_LVDD_ON (1 << 15) /* enable 9V and -6.5V to LCD. */
+
+/********************* H3800, ASIC #2 ********************/
+
+#define _H3800_ASIC2_Base (H3600_EGPIO_VIRT)
+#define H3800_ASIC2_OFFSET(s,x,y) \
+ (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
+#define H3800_ASIC2_NOFFSET(s,x,n,y) \
+ (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
+
+#define _H3800_ASIC2_GPIO_Base 0x0000
+#define _H3800_ASIC2_GPIO_Direction 0x0000 /* R/W, 16 bits 1:input, 0:output */
+#define _H3800_ASIC2_GPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */
+#define _H3800_ASIC2_GPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */
+#define _H3800_ASIC2_GPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */
+#define _H3800_ASIC2_GPIO_InterruptClear 0x0010 /* W, 12 bits */
+#define _H3800_ASIC2_GPIO_InterruptFlag 0x0010 /* R, 12 bits - reads int status */
+#define _H3800_ASIC2_GPIO_Data 0x0014 /* R/W, 16 bits */
+#define _H3800_ASIC2_GPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */
+#define _H3800_ASIC2_GPIO_InterruptEnable 0x001c /* R/W, 12 bits 1:enable interrupt */
+#define _H3800_ASIC2_GPIO_Alternate 0x003c /* R/W, 12+1 bits - set alternate functions */
+
+#define H3800_ASIC2_GPIO_Direction H3800_ASIC2_OFFSET( u16, GPIO, Direction )
+#define H3800_ASIC2_GPIO_InterruptType H3800_ASIC2_OFFSET( u16, GPIO, InterruptType )
+#define H3800_ASIC2_GPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType )
+#define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType )
+#define H3800_ASIC2_GPIO_InterruptClear H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear )
+#define H3800_ASIC2_GPIO_InterruptFlag H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag )
+#define H3800_ASIC2_GPIO_Data H3800_ASIC2_OFFSET( u16, GPIO, Data )
+#define H3800_ASIC2_GPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut )
+#define H3800_ASIC2_GPIO_InterruptEnable H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable )
+#define H3800_ASIC2_GPIO_Alternate H3800_ASIC2_OFFSET( u16, GPIO, Alternate )
+
+#define GPIO_H3800_ASIC2_IN_Y1_N (1 << 0) /* Output: Touchscreen Y1 */
+#define GPIO_H3800_ASIC2_IN_X0 (1 << 1) /* Output: Touchscreen X0 */
+#define GPIO_H3800_ASIC2_IN_Y0 (1 << 2) /* Output: Touchscreen Y0 */
+#define GPIO_H3800_ASIC2_IN_X1_N (1 << 3) /* Output: Touchscreen X1 */
+#define GPIO_H3800_ASIC2_BT_RST (1 << 4) /* Output: Bluetooth reset */
+#define GPIO_H3800_ASIC2_PEN_IRQ (1 << 5) /* Input : Pen down */
+#define GPIO_H3800_ASIC2_SD_DETECT (1 << 6) /* Input : SD detect */
+#define GPIO_H3800_ASIC2_EAR_IN_N (1 << 7) /* Input : Audio jack plug inserted */
+#define GPIO_H3800_ASIC2_OPT_PCM_RESET (1 << 8) /* Output: */
+#define GPIO_H3800_ASIC2_OPT_RESET (1 << 9) /* Output: */
+#define GPIO_H3800_ASIC2_USB_DETECT_N (1 << 10) /* Input : */
+#define GPIO_H3800_ASIC2_SD_CON_SLT (1 << 11) /* Input : */
+
+#define _H3800_ASIC2_KPIO_Base 0x0200
+#define _H3800_ASIC2_KPIO_Direction 0x0000 /* R/W, 12 bits 1:input, 0:output */
+#define _H3800_ASIC2_KPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */
+#define _H3800_ASIC2_KPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */
+#define _H3800_ASIC2_KPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */
+#define _H3800_ASIC2_KPIO_InterruptClear 0x0010 /* W, 20 bits - 8 special */
+#define _H3800_ASIC2_KPIO_InterruptFlag 0x0010 /* R, 20 bits - 8 special - reads int status */
+#define _H3800_ASIC2_KPIO_Data 0x0014 /* R/W, 16 bits */
+#define _H3800_ASIC2_KPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */
+#define _H3800_ASIC2_KPIO_InterruptEnable 0x001c /* R/W, 20 bits - 8 special */
+#define _H3800_ASIC2_KPIO_Alternate 0x003c /* R/W, 6 bits */
+
+#define H3800_ASIC2_KPIO_Direction H3800_ASIC2_OFFSET( u16, KPIO, Direction )
+#define H3800_ASIC2_KPIO_InterruptType H3800_ASIC2_OFFSET( u16, KPIO, InterruptType )
+#define H3800_ASIC2_KPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType )
+#define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType )
+#define H3800_ASIC2_KPIO_InterruptClear H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear )
+#define H3800_ASIC2_KPIO_InterruptFlag H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag )
+#define H3800_ASIC2_KPIO_Data H3800_ASIC2_OFFSET( u16, KPIO, Data )
+#define H3800_ASIC2_KPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut )
+#define H3800_ASIC2_KPIO_InterruptEnable H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable )
+#define H3800_ASIC2_KPIO_Alternate H3800_ASIC2_OFFSET( u16, KPIO, Alternate )
+
+#define H3800_ASIC2_KPIO_SPI_INT ( 1 << 16 )
+#define H3800_ASIC2_KPIO_OWM_INT ( 1 << 17 )
+#define H3800_ASIC2_KPIO_ADC_INT ( 1 << 18 )
+#define H3800_ASIC2_KPIO_UART_0_INT ( 1 << 19 )
+#define H3800_ASIC2_KPIO_UART_1_INT ( 1 << 20 )
+#define H3800_ASIC2_KPIO_TIMER_0_INT ( 1 << 21 )
+#define H3800_ASIC2_KPIO_TIMER_1_INT ( 1 << 22 )
+#define H3800_ASIC2_KPIO_TIMER_2_INT ( 1 << 23 )
+
+#define KPIO_H3800_ASIC2_RECORD_BTN_N (1 << 0) /* Record button */
+#define KPIO_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Keypad */
+#define KPIO_H3800_ASIC2_KEY_5W2_N (1 << 2) /* */
+#define KPIO_H3800_ASIC2_KEY_5W3_N (1 << 3) /* */
+#define KPIO_H3800_ASIC2_KEY_5W4_N (1 << 4) /* */
+#define KPIO_H3800_ASIC2_KEY_5W5_N (1 << 5) /* */
+#define KPIO_H3800_ASIC2_KEY_LEFT_N (1 << 6) /* */
+#define KPIO_H3800_ASIC2_KEY_RIGHT_N (1 << 7) /* */
+#define KPIO_H3800_ASIC2_KEY_AP1_N (1 << 8) /* Old "Calendar" */
+#define KPIO_H3800_ASIC2_KEY_AP2_N (1 << 9) /* Old "Schedule" */
+#define KPIO_H3800_ASIC2_KEY_AP3_N (1 << 10) /* Old "Q" */
+#define KPIO_H3800_ASIC2_KEY_AP4_N (1 << 11) /* Old "Undo" */
+
+/* Alternate KPIO functions (set by default) */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Action key */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W2_N (1 << 2) /* J1 of keypad input */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W3_N (1 << 3) /* J2 of keypad input */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W4_N (1 << 4) /* J3 of keypad input */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W5_N (1 << 5) /* J4 of keypad input */
+
+#define _H3800_ASIC2_SPI_Base 0x0400
+#define _H3800_ASIC2_SPI_Control 0x0000 /* R/W 8 bits */
+#define _H3800_ASIC2_SPI_Data 0x0004 /* R/W 8 bits */
+#define _H3800_ASIC2_SPI_ChipSelectDisabled 0x0008 /* W 8 bits */
+
+#define H3800_ASIC2_SPI_Control H3800_ASIC2_OFFSET( u8, SPI, Control )
+#define H3800_ASIC2_SPI_Data H3800_ASIC2_OFFSET( u8, SPI, Data )
+#define H3800_ASIC2_SPI_ChipSelectDisabled H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled )
+
+#define _H3800_ASIC2_PWM_0_Base 0x0600
+#define _H3800_ASIC2_PWM_1_Base 0x0700
+#define _H3800_ASIC2_PWM_TimeBase 0x0000 /* R/W 6 bits */
+#define _H3800_ASIC2_PWM_PeriodTime 0x0004 /* R/W 12 bits */
+#define _H3800_ASIC2_PWM_DutyTime 0x0008 /* R/W 12 bits */
+
+#define H3800_ASIC2_PWM_0_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 0, TimeBase )
+#define H3800_ASIC2_PWM_0_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime )
+#define H3800_ASIC2_PWM_0_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime )
+
+#define H3800_ASIC2_PWM_1_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 1, TimeBase )
+#define H3800_ASIC2_PWM_1_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime )
+#define H3800_ASIC2_PWM_1_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime )
+
+#define H3800_ASIC2_PWM_TIMEBASE_MASK 0xf /* Low 4 bits sets time base, max = 8 */
+#define H3800_ASIC2_PWM_TIMEBASE_ENABLE ( 1 << 4 ) /* Enable clock */
+#define H3800_ASIC2_PWM_TIMEBASE_CLEAR ( 1 << 5 ) /* Clear the PWM */
+
+#define _H3800_ASIC2_LED_0_Base 0x0800
+#define _H3800_ASIC2_LED_1_Base 0x0880
+#define _H3800_ASIC2_LED_2_Base 0x0900
+#define _H3800_ASIC2_LED_TimeBase 0x0000 /* R/W 7 bits */
+#define _H3800_ASIC2_LED_PeriodTime 0x0004 /* R/W 12 bits */
+#define _H3800_ASIC2_LED_DutyTime 0x0008 /* R/W 12 bits */
+#define _H3800_ASIC2_LED_AutoStopCount 0x000c /* R/W 16 bits */
+
+#define H3800_ASIC2_LED_0_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 0, TimeBase )
+#define H3800_ASIC2_LED_0_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime )
+#define H3800_ASIC2_LED_0_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime )
+#define H3800_ASIC2_LED_0_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock )
+
+#define H3800_ASIC2_LED_1_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 1, TimeBase )
+#define H3800_ASIC2_LED_1_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime )
+#define H3800_ASIC2_LED_1_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime )
+#define H3800_ASIC2_LED_1_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock )
+
+#define H3800_ASIC2_LED_2_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 2, TimeBase )
+#define H3800_ASIC2_LED_2_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime )
+#define H3800_ASIC2_LED_2_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime )
+#define H3800_ASIC2_LED_2_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock )
+
+#define H3800_ASIC2_LED_TIMEBASE_MASK 0x0f /* Low 4 bits sets time base, max = 13 */
+#define H3800_ASIC2_LED_TIMEBASE_BLINK ( 1 << 4 ) /* Enable blinking */
+#define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP ( 1 << 5 )
+#define H3800_ASIC2_LED_TIMEBASE_ALWAYS ( 1 << 6 ) /* Enable blink always */
+
+#define _H3800_ASIC2_UART_0_Base 0x0A00
+#define _H3800_ASIC2_UART_1_Base 0x0C00
+#define _H3800_ASIC2_UART_Receive 0x0000 /* R 8 bits */
+#define _H3800_ASIC2_UART_Transmit 0x0000 /* W 8 bits */
+#define _H3800_ASIC2_UART_IntEnable 0x0004 /* R/W 8 bits */
+#define _H3800_ASIC2_UART_IntVerify 0x0008 /* R/W 8 bits */
+#define _H3800_ASIC2_UART_FIFOControl 0x000c /* R/W 8 bits */
+#define _H3800_ASIC2_UART_LineControl 0x0010 /* R/W 8 bits */
+#define _H3800_ASIC2_UART_ModemStatus 0x0014 /* R/W 8 bits */
+#define _H3800_ASIC2_UART_LineStatus 0x0018 /* R/W 8 bits */
+#define _H3800_ASIC2_UART_ScratchPad 0x001c /* R/W 8 bits */
+#define _H3800_ASIC2_UART_DivisorLatchL 0x0020 /* R/W 8 bits */
+#define _H3800_ASIC2_UART_DivisorLatchH 0x0024 /* R/W 8 bits */
+
+#define H3800_ASIC2_UART_0_Receive H3800_ASIC2_NOFFSET( u8, UART, 0, Receive )
+#define H3800_ASIC2_UART_0_Transmit H3800_ASIC2_NOFFSET( u8, UART, 0, Transmit )
+#define H3800_ASIC2_UART_0_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 0, IntEnable )
+#define H3800_ASIC2_UART_0_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 0, IntVerify )
+#define H3800_ASIC2_UART_0_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 0, FIFOControl )
+#define H3800_ASIC2_UART_0_LineControl H3800_ASIC2_NOFFSET( u8, UART, 0, LineControl )
+#define H3800_ASIC2_UART_0_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 0, ModemStatus )
+#define H3800_ASIC2_UART_0_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 0, LineStatus )
+#define H3800_ASIC2_UART_0_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 0, ScratchPad )
+#define H3800_ASIC2_UART_0_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchL )
+#define H3800_ASIC2_UART_0_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchH )
+
+#define H3800_ASIC2_UART_1_Receive H3800_ASIC2_NOFFSET( u8, UART, 1, Receive )
+#define H3800_ASIC2_UART_1_Transmit H3800_ASIC2_NOFFSET( u8, UART, 1, Transmit )
+#define H3800_ASIC2_UART_1_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 1, IntEnable )
+#define H3800_ASIC2_UART_1_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 1, IntVerify )
+#define H3800_ASIC2_UART_1_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 1, FIFOControl )
+#define H3800_ASIC2_UART_1_LineControl H3800_ASIC2_NOFFSET( u8, UART, 1, LineControl )
+#define H3800_ASIC2_UART_1_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 1, ModemStatus )
+#define H3800_ASIC2_UART_1_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 1, LineStatus )
+#define H3800_ASIC2_UART_1_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 1, ScratchPad )
+#define H3800_ASIC2_UART_1_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchL )
+#define H3800_ASIC2_UART_1_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchH )
+
+#define _H3800_ASIC2_TIMER_Base 0x0E00
+#define _H3800_ASIC2_TIMER_Command 0x0000 /* R/W 8 bits */
+
+#define H3800_ASIC2_TIMER_Command H3800_ASIC2_OFFSET( u8, Timer, Command )
+
+#define H3800_ASIC2_TIMER_GAT_0 ( 1 << 0 ) /* Gate enable, counter 0 */
+#define H3800_ASIC2_TIMER_GAT_1 ( 1 << 1 ) /* Gate enable, counter 1 */
+#define H3800_ASIC2_TIMER_GAT_2 ( 1 << 2 ) /* Gate enable, counter 2 */
+#define H3800_ASIC2_TIMER_CLK_0 ( 1 << 3 ) /* Clock enable, counter 0 */
+#define H3800_ASIC2_TIMER_CLK_1 ( 1 << 4 ) /* Clock enable, counter 1 */
+#define H3800_ASIC2_TIMER_CLK_2 ( 1 << 5 ) /* Clock enable, counter 2 */
+#define H3800_ASIC2_TIMER_MODE_0 ( 1 << 6 ) /* Mode 0 enable, counter 0 */
+#define H3800_ASIC2_TIMER_MODE_1 ( 1 << 7 ) /* Mode 0 enable, counter 1 */
+
+#define _H3800_ASIC2_CLOCK_Base 0x1000
+#define _H3800_ASIC2_CLOCK_Enable 0x0000 /* R/W 18 bits */
+
+#define H3800_ASIC2_CLOCK_Enable H3800_ASIC2_OFFSET( u32, CLOCK, Enable )
+
+#define H3800_ASIC2_CLOCK_AUDIO_1 0x0001 /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */
+#define H3800_ASIC2_CLOCK_AUDIO_2 0x0002 /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */
+#define H3800_ASIC2_CLOCK_AUDIO_3 0x0004 /* Enable 5.6 MHz clock for 11 kHZ sample rate */
+#define H3800_ASIC2_CLOCK_AUDIO_4 0x0008 /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */
+#define H3800_ASIC2_CLOCK_ADC ( 1 << 4 ) /* 1.024 MHz clock to ADC */
+#define H3800_ASIC2_CLOCK_SPI ( 1 << 5 ) /* 4.096 MHz clock to SPI */
+#define H3800_ASIC2_CLOCK_OWM ( 1 << 6 ) /* 4.096 MHz clock to OWM */
+#define H3800_ASIC2_CLOCK_PWM ( 1 << 7 ) /* 2.048 MHz clock to PWM */
+#define H3800_ASIC2_CLOCK_UART_1 ( 1 << 8 ) /* 24.576 MHz clock to UART1 (turn off bit 16) */
+#define H3800_ASIC2_CLOCK_UART_0 ( 1 << 9 ) /* 24.576 MHz clock to UART0 (turn off bit 17) */
+#define H3800_ASIC2_CLOCK_SD_1 ( 1 << 10 ) /* 16.934 MHz to SD */
+#define H3800_ASIC2_CLOCK_SD_2 ( 2 << 10 ) /* 24.576 MHz to SD */
+#define H3800_ASIC2_CLOCK_SD_3 ( 3 << 10 ) /* 33.869 MHz to SD */
+#define H3800_ASIC2_CLOCK_SD_4 ( 4 << 10 ) /* 49.152 MHz to SD */
+#define H3800_ASIC2_CLOCK_EX0 ( 1 << 13 ) /* Enable 32.768 kHz crystal */
+#define H3800_ASIC2_CLOCK_EX1 ( 1 << 14 ) /* Enable 24.576 MHz crystal */
+#define H3800_ASIC2_CLOCK_EX2 ( 1 << 15 ) /* Enable 33.869 MHz crystal */
+#define H3800_ASIC2_CLOCK_SLOW_UART_1 ( 1 << 16 ) /* Enable 3.686 MHz to UART1 (turn off bit 8) */
+#define H3800_ASIC2_CLOCK_SLOW_UART_0 ( 1 << 17 ) /* Enable 3.686 MHz to UART0 (turn off bit 9) */
+
+#define _H3800_ASIC2_ADC_Base 0x1200
+#define _H3800_ASIC2_ADC_Multiplexer 0x0000 /* R/W 4 bits - low 3 bits set channel */
+#define _H3800_ASIC2_ADC_ControlStatus 0x0004 /* R/W 8 bits */
+#define _H3800_ASIC2_ADC_Data 0x0008 /* R 10 bits */
+
+#define H3800_ASIC2_ADC_Multiplexer H3800_ASIC2_OFFSET( u8, ADC, Multiplexer )
+#define H3800_ASIC2_ADC_ControlStatus H3800_ASIC2_OFFSET( u8, ADC, ControlStatus )
+#define H3800_ASIC2_ADC_Data H3800_ASIC2_OFFSET( u16, ADC, Data )
+
+#define H3600_ASIC2_ADC_MUX_CHANNEL_MASK 0x07 /* Low 3 bits sets channel. max = 4 */
+#define H3600_ASIC2_ADC_MUX_CLKEN ( 1 << 3 ) /* Enable clock */
+
+#define H3600_ASIC2_ADC_CSR_ADPS_MASK 0x0f /* Low 4 bits sets prescale, max = 8 */
+#define H3600_ASIC2_ADC_CSR_FREE_RUN ( 1 << 4 )
+#define H3600_ASIC2_ADC_CSR_INT_ENABLE ( 1 << 5 )
+#define H3600_ASIC2_ADC_CSR_START ( 1 << 6 ) /* Set to start conversion. Goes to 0 when done */
+#define H3600_ASIC2_ADC_CSR_ENABLE ( 1 << 7 ) /* 1:power up ADC, 0:power down */
+
+
+#define _H3800_ASIC2_INTR_Base 0x1600
+#define _H3800_ASIC2_INTR_MaskAndFlag 0x0000 /* R/(W) 8bits */
+#define _H3800_ASIC2_INTR_ClockPrescale 0x0004 /* R/(W) 5bits */
+#define _H3800_ASIC2_INTR_TimerSet 0x0008 /* R/(W) 8bits */
+
+#define H3800_ASIC2_INTR_MaskAndFlag H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag )
+#define H3800_ASIC2_INTR_ClockPrescale H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale )
+#define H3800_ASIC2_INTR_TimerSet H3800_ASIC2_OFFSET( u8, INTR, TimerSet )
+
+#define H3800_ASIC2_INTR_GLOBAL_MASK ( 1 << 0 ) /* Global interrupt mask */
+#define H3800_ASIC2_INTR_POWER_ON_RESET ( 1 << 1 ) /* 01: Power on reset (bits 1 & 2 ) */
+#define H3800_ASIC2_INTR_EXTERNAL_RESET ( 2 << 1 ) /* 10: External reset (bits 1 & 2 ) */
+#define H3800_ASIC2_INTR_MASK_UART_0 ( 1 << 4 )
+#define H3800_ASIC2_INTR_MASK_UART_1 ( 1 << 5 )
+#define H3800_ASIC2_INTR_MASK_TIMER ( 1 << 6 )
+#define H3800_ASIC2_INTR_MASK_OWM ( 1 << 7 )
+
+#define H3800_ASIC2_INTR_CLOCK_PRESCALE 0x0f /* 4 bits, max 14 */
+#define H3800_ASIC2_INTR_SET ( 1 << 4 ) /* Time base enable */
+
+
+#define _H3800_ASIC2_OWM_Base 0x1800
+#define _H3800_ASIC2_OWM_Command 0x0000 /* R/W 4 bits command register */
+#define _H3800_ASIC2_OWM_Data 0x0004 /* R/W 8 bits, transmit / receive buffer */
+#define _H3800_ASIC2_OWM_Interrupt 0x0008 /* R/W Command register */
+#define _H3800_ASIC2_OWM_InterruptEnable 0x000c /* R/W Command register */
+#define _H3800_ASIC2_OWM_ClockDivisor 0x0010 /* R/W 5 bits of divisor and pre-scale */
+
+#define H3800_ASIC2_OWM_Command H3800_ASIC2_OFFSET( u8, OWM, Command )
+#define H3800_ASIC2_OWM_Data H3800_ASIC2_OFFSET( u8, OWM, Data )
+#define H3800_ASIC2_OWM_Interrupt H3800_ASIC2_OFFSET( u8, OWM, Interrupt )
+#define H3800_ASIC2_OWM_InterruptEnable H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable )
+#define H3800_ASIC2_OWM_ClockDivisor H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor )
+
+#define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 ) /* Set to force reset on 1-wire bus */
+#define H3800_ASIC2_OWM_CMD_SRA ( 1 << 1 ) /* Set to switch to Search ROM accelerator mode */
+#define H3800_ASIC2_OWM_CMD_DQ_OUTPUT ( 1 << 2 ) /* Write only - forces bus low */
+#define H3800_ASIC2_OWM_CMD_DQ_INPUT ( 1 << 3 ) /* Read only - reflects state of bus */
+
+#define H3800_ASIC2_OWM_INT_PD ( 1 << 0 ) /* Presence detect */
+#define H3800_ASIC2_OWM_INT_PDR ( 1 << 1 ) /* Presence detect result */
+#define H3800_ASIC2_OWM_INT_TBE ( 1 << 2 ) /* Transmit buffer empty */
+#define H3800_ASIC2_OWM_INT_TEMT ( 1 << 3 ) /* Transmit shift register empty */
+#define H3800_ASIC2_OWM_INT_RBF ( 1 << 4 ) /* Receive buffer full */
+
+#define H3800_ASIC2_OWM_INTEN_EPD ( 1 << 0 ) /* Enable receive buffer full interrupt */
+#define H3800_ASIC2_OWM_INTEN_IAS ( 1 << 1 ) /* Enable transmit shift register empty interrupt */
+#define H3800_ASIC2_OWM_INTEN_ETBE ( 1 << 2 ) /* Enable transmit buffer empty interrupt */
+#define H3800_ASIC2_OWM_INTEN_ETMT ( 1 << 3 ) /* INTR active state */
+#define H3800_ASIC2_OWM_INTEN_ERBF ( 1 << 4 ) /* Enable presence detect interrupt */
+
+#define _H3800_ASIC2_FlashCtl_Base 0x1A00
+
+/****************************************************/
+/* H3800, ASIC #1
+ * This ASIC is accesed through ASIC #2, and
+ * mapped into the 1c00 - 1f00 region
+ */
+
+#define H3800_ASIC1_OFFSET(s,x,y) \
+ (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1))))
+
+#define _H3800_ASIC1_MMC_Base 0x1c00
+
+#define _H3800_ASIC1_MMC_StartStopClock 0x00 /* R/W 8bit */
+#define _H3800_ASIC1_MMC_Status 0x02 /* R See below, default 0x0040 */
+#define _H3800_ASIC1_MMC_ClockRate 0x04 /* R/W 8bit, low 3 bits are clock divisor */
+#define _H3800_ASIC1_MMC_SPIRegister 0x08 /* R/W 8bit, see below */
+#define _H3800_ASIC1_MMC_CmdDataCont 0x0a /* R/W 8bit, write to start MMC adapter */
+#define _H3800_ASIC1_MMC_ResponseTimeout 0x0c /* R/W 8bit, clocks before response timeout */
+#define _H3800_ASIC1_MMC_ReadTimeout 0x0e /* R/W 16bit, clocks before received data timeout */
+#define _H3800_ASIC1_MMC_BlockLength 0x10 /* R/W 10bit */
+#define _H3800_ASIC1_MMC_NumOfBlocks 0x12 /* R/W 16bit, in block mode, number of blocks */
+#define _H3800_ASIC1_MMC_InterruptMask 0x1a /* R/W 8bit */
+#define _H3800_ASIC1_MMC_CommandNumber 0x1c /* R/W 6 bits */
+#define _H3800_ASIC1_MMC_ArgumentH 0x1e /* R/W 16 bits */
+#define _H3800_ASIC1_MMC_ArgumentL 0x20 /* R/W 16 bits */
+#define _H3800_ASIC1_MMC_ResFifo 0x22 /* R 8 x 16 bits - contains response FIFO */
+#define _H3800_ASIC1_MMC_BufferPartFull 0x28 /* R/W 8 bits */
+
+#define H3800_ASIC1_MMC_StartStopClock H3800_ASIC1_OFFSET( u8, MMC, StartStopClock )
+#define H3800_ASIC1_MMC_Status H3800_ASIC1_OFFSET( u16, MMC, Status )
+#define H3800_ASIC1_MMC_ClockRate H3800_ASIC1_OFFSET( u8, MMC, ClockRate )
+#define H3800_ASIC1_MMC_SPIRegister H3800_ASIC1_OFFSET( u8, MMC, SPIRegister )
+#define H3800_ASIC1_MMC_CmdDataCont H3800_ASIC1_OFFSET( u8, MMC, CmdDataCont )
+#define H3800_ASIC1_MMC_ResponseTimeout H3800_ASIC1_OFFSET( u8, MMC, ResponseTimeout )
+#define H3800_ASIC1_MMC_ReadTimeout H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout )
+#define H3800_ASIC1_MMC_BlockLength H3800_ASIC1_OFFSET( u16, MMC, BlockLength )
+#define H3800_ASIC1_MMC_NumOfBlocks H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks )
+#define H3800_ASIC1_MMC_InterruptMask H3800_ASIC1_OFFSET( u8, MMC, InterruptMask )
+#define H3800_ASIC1_MMC_CommandNumber H3800_ASIC1_OFFSET( u8, MMC, CommandNumber )
+#define H3800_ASIC1_MMC_ArgumentH H3800_ASIC1_OFFSET( u16, MMC, ArgumentH )
+#define H3800_ASIC1_MMC_ArgumentL H3800_ASIC1_OFFSET( u16, MMC, ArgumentL )
+#define H3800_ASIC1_MMC_ResFifo H3800_ASIC1_OFFSET( u16, MMC, ResFifo )
+#define H3800_ASIC1_MMC_BufferPartFull H3800_ASIC1_OFFSET( u8, MMC, BufferPartFull )
+
+#define H3800_ASIC1_MMC_STOP_CLOCK (1 << 0) /* Write to "StartStopClock" register */
+#define H3800_ASIC1_MMC_START_CLOCK (1 << 1)
+
+#define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT (1 << 0)
+#define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT (1 << 1)
+#define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR (1 << 2)
+#define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR (1 << 3)
+#define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR (1 << 4) /* SPI data token error received */
+#define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR (1 << 5)
+#define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY (1 << 6)
+#define H3800_ASIC1_MMC_STATUS_FIFO_FULL (1 << 7)
+#define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE (1 << 8) /* MultiMediaCard clock stopped */
+#define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE (1 << 11) /* Write operation, indicates transfer finished */
+#define H3800_ASIC1_MMC_STATUS_END_PROGRAM (1 << 12) /* End write and read operations */
+#define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE (1 << 13) /* End command response */
+
+#define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE (1 << 0) /* Enables SPI mode */
+#define H3800_ASIC1_MMC_SPI_REG_CRC_ON (1 << 1) /* 1:turn on CRC */
+#define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE (1 << 2) /* 1:turn on SPI CS */
+#define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK 0x38 /* Bits 3,4,5 are the SPI CS relative address */
+
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE 0x00
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1 0x01
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2 0x02
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3 0x03
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE (1 << 2) /* This command contains a data transfer */
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE (1 << 3) /* This data transfer is a write */
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE (1 << 4) /* This data transfer is in stream mode */
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT (1 << 5) /* Busy signal expected after current cmd */
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE (1 << 6) /* Enables the 80 bits for initializing card */
+
+#define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE (1 << 0)
+#define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE (1 << 1)
+#define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE (1 << 2)
+#define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY (1 << 3)
+
+#define H3800_ASIC1_MMC_BUFFER_PART_FULL (1 << 0)
+
+/********* GPIO **********/
+
+#define _H3800_ASIC1_GPIO_Base 0x1e00
+
+#define _H3800_ASIC1_GPIO_Mask 0x30 /* R/W 0:don't mask, 1:mask interrupt */
+#define _H3800_ASIC1_GPIO_Direction 0x32 /* R/W 0:input, 1:output */
+#define _H3800_ASIC1_GPIO_Out 0x34 /* R/W 0:output low, 1:output high */
+#define _H3800_ASIC1_GPIO_TriggerType 0x36 /* R/W 0:level, 1:edge */
+#define _H3800_ASIC1_GPIO_EdgeTrigger 0x38 /* R/W 0:falling, 1:rising */
+#define _H3800_ASIC1_GPIO_LevelTrigger 0x3A /* R/W 0:low, 1:high level detect */
+#define _H3800_ASIC1_GPIO_LevelStatus 0x3C /* R/W 0:none, 1:detect */
+#define _H3800_ASIC1_GPIO_EdgeStatus 0x3E /* R/W 0:none, 1:detect */
+#define _H3800_ASIC1_GPIO_State 0x40 /* R See masks below (default 0) */
+#define _H3800_ASIC1_GPIO_Reset 0x42 /* R/W See masks below (default 0x04) */
+#define _H3800_ASIC1_GPIO_SleepMask 0x44 /* R/W 0:don't mask, 1:mask trigger in sleep mode */
+#define _H3800_ASIC1_GPIO_SleepDir 0x46 /* R/W direction 0:input, 1:output in sleep mode */
+#define _H3800_ASIC1_GPIO_SleepOut 0x48 /* R/W level 0:low, 1:high in sleep mode */
+#define _H3800_ASIC1_GPIO_Status 0x4A /* R Pin status */
+#define _H3800_ASIC1_GPIO_BattFaultDir 0x4C /* R/W direction 0:input, 1:output in batt_fault */
+#define _H3800_ASIC1_GPIO_BattFaultOut 0x4E /* R/W level 0:low, 1:high in batt_fault */
+
+#define H3800_ASIC1_GPIO_Mask H3800_ASIC1_OFFSET( u16, GPIO, Mask )
+#define H3800_ASIC1_GPIO_Direction H3800_ASIC1_OFFSET( u16, GPIO, Direction )
+#define H3800_ASIC1_GPIO_Out H3800_ASIC1_OFFSET( u16, GPIO, Out )
+#define H3800_ASIC1_GPIO_TriggerType H3800_ASIC1_OFFSET( u16, GPIO, TriggerType )
+#define H3800_ASIC1_GPIO_EdgeTrigger H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger )
+#define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger )
+#define H3800_ASIC1_GPIO_LevelStatus H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus )
+#define H3800_ASIC1_GPIO_EdgeStatus H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus )
+#define H3800_ASIC1_GPIO_State H3800_ASIC1_OFFSET( u8, GPIO, State )
+#define H3800_ASIC1_GPIO_Reset H3800_ASIC1_OFFSET( u8, GPIO, Reset )
+#define H3800_ASIC1_GPIO_SleepMask H3800_ASIC1_OFFSET( u16, GPIO, SleepMask )
+#define H3800_ASIC1_GPIO_SleepDir H3800_ASIC1_OFFSET( u16, GPIO, SleepDir )
+#define H3800_ASIC1_GPIO_SleepOut H3800_ASIC1_OFFSET( u16, GPIO, SleepOut )
+#define H3800_ASIC1_GPIO_Status H3800_ASIC1_OFFSET( u16, GPIO, Status )
+#define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir )
+#define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut )
+
+#define H3800_ASIC1_GPIO_STATE_MASK (1 << 0)
+#define H3800_ASIC1_GPIO_STATE_DIRECTION (1 << 1)
+#define H3800_ASIC1_GPIO_STATE_OUT (1 << 2)
+#define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE (1 << 3)
+#define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER (1 << 4)
+#define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER (1 << 5)
+
+#define H3800_ASIC1_GPIO_RESET_SOFTWARE (1 << 0)
+#define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP (1 << 1)
+#define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON (1 << 2)
+
+/* These are all outputs */
+#define GPIO_H3800_ASIC1_IR_ON_N (1 << 0) /* Apply power to the IR Module */
+#define GPIO_H3800_ASIC1_SD_PWR_ON (1 << 1) /* Secure Digital power on */
+#define GPIO_H3800_ASIC1_RS232_ON (1 << 2) /* Turn on power to the RS232 chip ? */
+#define GPIO_H3800_ASIC1_PULSE_GEN (1 << 3) /* Goes to speaker / earphone */
+#define GPIO_H3800_ASIC1_CH_TIMER (1 << 4) /* */
+#define GPIO_H3800_ASIC1_LCD_5V_ON (1 << 5) /* Enables LCD_5V */
+#define GPIO_H3800_ASIC1_LCD_ON (1 << 6) /* Enables LCD_3V */
+#define GPIO_H3800_ASIC1_LCD_PCI (1 << 7) /* Connects to PDWN on LCD controller */
+#define GPIO_H3800_ASIC1_VGH_ON (1 << 8) /* Drives VGH on the LCD (+9??) */
+#define GPIO_H3800_ASIC1_VGL_ON (1 << 9) /* Drivers VGL on the LCD (-6??) */
+#define GPIO_H3800_ASIC1_FL_PWR_ON (1 << 10) /* Frontlight power on */
+#define GPIO_H3800_ASIC1_BT_PWR_ON (1 << 11) /* Bluetooth power on */
+#define GPIO_H3800_ASIC1_SPK_ON (1 << 12) /* */
+#define GPIO_H3800_ASIC1_EAR_ON_N (1 << 13) /* */
+#define GPIO_H3800_ASIC1_AUD_PWR_ON (1 << 14) /* */
+
+/* Write enable for the flash */
+
+#define _H3800_ASIC1_FlashWP_Base 0x1F00
+#define _H3800_ASIC1_FlashWP_VPP_ON 0x00 /* R 1: write, 0: protect */
+#define H3800_ASIC1_FlashWP_VPP_ON H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON )
+
+#endif /* _INCLUDE_H3600_GPIO_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
new file mode 100644
index 0000000..5976435
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/hardware.h
+ *
+ * Copyright (C) 1998 Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware definitions for SA1100 architecture
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ * Definitions for SA1111 added.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+
+#define UNCACHEABLE_ADDR 0xfa050000
+
+
+/*
+ * SA1100 internal I/O mappings
+ *
+ * We have the following mapping:
+ * phys virt
+ * 80000000 f8000000
+ * 90000000 fa000000
+ * a0000000 fc000000
+ * b0000000 fe000000
+ */
+
+#define VIO_BASE 0xf8000000 /* virtual start of IO space */
+#define VIO_SHIFT 3 /* x = IO space shrink power */
+#define PIO_START 0x80000000 /* physical start of IO space */
+
+#define io_p2v( x ) \
+ ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
+#define io_v2p( x ) \
+ ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
+
+#ifndef __ASSEMBLY__
+
+# define __REG(x) (*((volatile unsigned long *)io_p2v(x)))
+# define __PREG(x) (io_v2p((unsigned long)&(x)))
+
+#else
+
+# define __REG(x) io_p2v(x)
+# define __PREG(x) io_v2p(x)
+
+#endif
+
+#include "SA-1100.h"
+
+#ifdef CONFIG_SA1101
+#include "SA-1101.h"
+#endif
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-sa1100/include/mach/ide.h b/arch/arm/mach-sa1100/include/mach/ide.h
new file mode 100644
index 0000000..4c99c8f
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/ide.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/ide.h
+ *
+ * Copyright (c) 1998 Hugo Fiennes & Nicolas Pitre
+ *
+ * 18-aug-2000: Cleanup by Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ * Get rid of the special ide_init_hwif_ports() functions
+ * and make a generalised function that can be used by all
+ * architectures.
+ */
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#error "This code is broken and needs update to match with current ide support"
+
+
+/*
+ * Set up a hw structure for a specified data port, control port and IRQ.
+ * This should follow whatever the default interface uses.
+ */
+static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
+ unsigned long ctrl_port, int *irq)
+{
+ unsigned long reg = data_port;
+ int i;
+ int regincr = 1;
+
+ /* The Empeg board has the first two address lines unused */
+ if (machine_is_empeg())
+ regincr = 1 << 2;
+
+ /* The LART doesn't use A0 for IDE */
+ if (machine_is_lart())
+ regincr = 1 << 1;
+
+ memset(hw, 0, sizeof(*hw));
+
+ for (i = 0; i <= 7; i++) {
+ hw->io_ports_array[i] = reg;
+ reg += regincr;
+ }
+
+ hw->io_ports.ctl_addr = ctrl_port;
+
+ if (irq)
+ *irq = 0;
+}
+
+/*
+ * This registers the standard ports for this architecture with the IDE
+ * driver.
+ */
+static __inline__ void
+ide_init_default_hwifs(void)
+{
+ if (machine_is_lart()) {
+#ifdef CONFIG_SA1100_LART
+ hw_regs_t hw;
+
+ /* Enable GPIO as interrupt line */
+ GPDR &= ~LART_GPIO_IDE;
+ set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING);
+
+ /* set PCMCIA interface timing */
+ MECR = 0x00060006;
+
+ /* init the interface */
+ ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL);
+ hw.irq = LART_IRQ_IDE;
+ ide_register_hw(&hw);
+#endif
+ }
+}
diff --git a/arch/arm/mach-sa1100/include/mach/io.h b/arch/arm/mach-sa1100/include/mach/io.h
new file mode 100644
index 0000000..0c070a6
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ * 06-12-1997 RMK Created.
+ * 07-04-1999 RMK Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)addr;
+}
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
new file mode 100644
index 0000000..0cb3660
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/irqs.h
+ *
+ * Copyright (C) 1996 Russell King
+ * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
+ * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
+ *
+ * 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs.
+ */
+
+#define IRQ_GPIO0 0
+#define IRQ_GPIO1 1
+#define IRQ_GPIO2 2
+#define IRQ_GPIO3 3
+#define IRQ_GPIO4 4
+#define IRQ_GPIO5 5
+#define IRQ_GPIO6 6
+#define IRQ_GPIO7 7
+#define IRQ_GPIO8 8
+#define IRQ_GPIO9 9
+#define IRQ_GPIO10 10
+#define IRQ_GPIO11_27 11
+#define IRQ_LCD 12 /* LCD controller */
+#define IRQ_Ser0UDC 13 /* Ser. port 0 UDC */
+#define IRQ_Ser1SDLC 14 /* Ser. port 1 SDLC */
+#define IRQ_Ser1UART 15 /* Ser. port 1 UART */
+#define IRQ_Ser2ICP 16 /* Ser. port 2 ICP */
+#define IRQ_Ser3UART 17 /* Ser. port 3 UART */
+#define IRQ_Ser4MCP 18 /* Ser. port 4 MCP */
+#define IRQ_Ser4SSP 19 /* Ser. port 4 SSP */
+#define IRQ_DMA0 20 /* DMA controller channel 0 */
+#define IRQ_DMA1 21 /* DMA controller channel 1 */
+#define IRQ_DMA2 22 /* DMA controller channel 2 */
+#define IRQ_DMA3 23 /* DMA controller channel 3 */
+#define IRQ_DMA4 24 /* DMA controller channel 4 */
+#define IRQ_DMA5 25 /* DMA controller channel 5 */
+#define IRQ_OST0 26 /* OS Timer match 0 */
+#define IRQ_OST1 27 /* OS Timer match 1 */
+#define IRQ_OST2 28 /* OS Timer match 2 */
+#define IRQ_OST3 29 /* OS Timer match 3 */
+#define IRQ_RTC1Hz 30 /* RTC 1 Hz clock */
+#define IRQ_RTCAlrm 31 /* RTC Alarm */
+
+#define IRQ_GPIO11 32
+#define IRQ_GPIO12 33
+#define IRQ_GPIO13 34
+#define IRQ_GPIO14 35
+#define IRQ_GPIO15 36
+#define IRQ_GPIO16 37
+#define IRQ_GPIO17 38
+#define IRQ_GPIO18 39
+#define IRQ_GPIO19 40
+#define IRQ_GPIO20 41
+#define IRQ_GPIO21 42
+#define IRQ_GPIO22 43
+#define IRQ_GPIO23 44
+#define IRQ_GPIO24 45
+#define IRQ_GPIO25 46
+#define IRQ_GPIO26 47
+#define IRQ_GPIO27 48
+
+/*
+ * The next 16 interrupts are for board specific purposes. Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these. If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits. IRQs 49 to 64 are available.
+ */
+#define IRQ_BOARD_START 49
+#define IRQ_BOARD_END 65
+
+#define IRQ_SA1111_START (IRQ_BOARD_END)
+#define IRQ_GPAIN0 (IRQ_BOARD_END + 0)
+#define IRQ_GPAIN1 (IRQ_BOARD_END + 1)
+#define IRQ_GPAIN2 (IRQ_BOARD_END + 2)
+#define IRQ_GPAIN3 (IRQ_BOARD_END + 3)
+#define IRQ_GPBIN0 (IRQ_BOARD_END + 4)
+#define IRQ_GPBIN1 (IRQ_BOARD_END + 5)
+#define IRQ_GPBIN2 (IRQ_BOARD_END + 6)
+#define IRQ_GPBIN3 (IRQ_BOARD_END + 7)
+#define IRQ_GPBIN4 (IRQ_BOARD_END + 8)
+#define IRQ_GPBIN5 (IRQ_BOARD_END + 9)
+#define IRQ_GPCIN0 (IRQ_BOARD_END + 10)
+#define IRQ_GPCIN1 (IRQ_BOARD_END + 11)
+#define IRQ_GPCIN2 (IRQ_BOARD_END + 12)
+#define IRQ_GPCIN3 (IRQ_BOARD_END + 13)
+#define IRQ_GPCIN4 (IRQ_BOARD_END + 14)
+#define IRQ_GPCIN5 (IRQ_BOARD_END + 15)
+#define IRQ_GPCIN6 (IRQ_BOARD_END + 16)
+#define IRQ_GPCIN7 (IRQ_BOARD_END + 17)
+#define IRQ_MSTXINT (IRQ_BOARD_END + 18)
+#define IRQ_MSRXINT (IRQ_BOARD_END + 19)
+#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20)
+#define IRQ_TPTXINT (IRQ_BOARD_END + 21)
+#define IRQ_TPRXINT (IRQ_BOARD_END + 22)
+#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23)
+#define SSPXMTINT (IRQ_BOARD_END + 24)
+#define SSPRCVINT (IRQ_BOARD_END + 25)
+#define SSPROR (IRQ_BOARD_END + 26)
+#define AUDXMTDMADONEA (IRQ_BOARD_END + 32)
+#define AUDRCVDMADONEA (IRQ_BOARD_END + 33)
+#define AUDXMTDMADONEB (IRQ_BOARD_END + 34)
+#define AUDRCVDMADONEB (IRQ_BOARD_END + 35)
+#define AUDTFSR (IRQ_BOARD_END + 36)
+#define AUDRFSR (IRQ_BOARD_END + 37)
+#define AUDTUR (IRQ_BOARD_END + 38)
+#define AUDROR (IRQ_BOARD_END + 39)
+#define AUDDTS (IRQ_BOARD_END + 40)
+#define AUDRDD (IRQ_BOARD_END + 41)
+#define AUDSTO (IRQ_BOARD_END + 42)
+#define IRQ_USBPWR (IRQ_BOARD_END + 43)
+#define IRQ_HCIM (IRQ_BOARD_END + 44)
+#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45)
+#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46)
+#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47)
+#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48)
+#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49)
+#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50)
+#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51)
+#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52)
+#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53)
+#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54)
+
+#define IRQ_LOCOMO_START (IRQ_BOARD_END)
+#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0)
+#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1)
+#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2)
+#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3)
+#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4)
+#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5)
+#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6)
+#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7)
+#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8)
+#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9)
+#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10)
+#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11)
+#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12)
+#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13)
+#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14)
+#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15)
+#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16)
+#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17)
+#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18)
+#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19)
+#define IRQ_LOCOMO_SPI_REND (IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21)
+
+/*
+ * Figure out the MAX IRQ number.
+ *
+ * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * Otherwise, we have the standard IRQs only.
+ */
+#ifdef CONFIG_SA1111
+#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
+#elif defined(CONFIG_SA1100_H3800)
+#define NR_IRQS (IRQ_BOARD_END)
+#elif defined(CONFIG_SHARP_LOCOMO)
+#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
+#else
+#define NR_IRQS (IRQ_BOARD_START)
+#endif
+
+/*
+ * Board specific IRQs. Define them here.
+ * Do not surround them with ifdefs.
+ */
+#define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0)
+#define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1)
+#define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2)
+
+/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
+#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0)
+#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1)
+#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
+#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
+
+/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
+#define H3800_KPIO_IRQ_START (IRQ_BOARD_START)
+#define IRQ_H3800_KEY (IRQ_BOARD_START + 0)
+#define IRQ_H3800_SPI (IRQ_BOARD_START + 1)
+#define IRQ_H3800_OWM (IRQ_BOARD_START + 2)
+#define IRQ_H3800_ADC (IRQ_BOARD_START + 3)
+#define IRQ_H3800_UART_0 (IRQ_BOARD_START + 4)
+#define IRQ_H3800_UART_1 (IRQ_BOARD_START + 5)
+#define IRQ_H3800_TIMER_0 (IRQ_BOARD_START + 6)
+#define IRQ_H3800_TIMER_1 (IRQ_BOARD_START + 7)
+#define IRQ_H3800_TIMER_2 (IRQ_BOARD_START + 8)
+#define H3800_KPIO_IRQ_COUNT 9
+
+#define H3800_GPIO_IRQ_START (IRQ_BOARD_START + 9)
+#define IRQ_H3800_PEN (IRQ_BOARD_START + 9)
+#define IRQ_H3800_SD_DETECT (IRQ_BOARD_START + 10)
+#define IRQ_H3800_EAR_IN (IRQ_BOARD_START + 11)
+#define IRQ_H3800_USB_DETECT (IRQ_BOARD_START + 12)
+#define IRQ_H3800_SD_CON_SLT (IRQ_BOARD_START + 13)
+#define H3800_GPIO_IRQ_COUNT 5
diff --git a/arch/arm/mach-sa1100/include/mach/jornada720.h b/arch/arm/mach-sa1100/include/mach/jornada720.h
new file mode 100644
index 0000000..bc12085
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/jornada720.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/jornada720.h
+ *
+ * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728
+ *
+ * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ * Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ /* HP Jornada 7xx microprocessor commands */
+#define GETBATTERYDATA 0xc0
+#define GETSCANKEYCODE 0x90
+#define GETTOUCHSAMPLES 0xa0
+#define GETCONTRAST 0xD0
+#define SETCONTRAST 0xD1
+#define GETBRIGHTNESS 0xD2
+#define SETBRIGHTNESS 0xD3
+#define CONTRASTOFF 0xD8
+#define BRIGHTNESSOFF 0xD9
+#define PWMOFF 0xDF
+#define TXDUMMY 0x11
+#define ERRORCODE 0x00
diff --git a/arch/arm/mach-sa1100/include/mach/lart.h b/arch/arm/mach-sa1100/include/mach/lart.h
new file mode 100644
index 0000000..8a5482d
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/lart.h
@@ -0,0 +1,13 @@
+#ifndef _INCLUDE_LART_H
+#define _INCLUDE_LART_H
+
+#define LART_GPIO_ETH0 GPIO_GPIO0
+#define LART_IRQ_ETH0 IRQ_GPIO0
+
+#define LART_GPIO_IDE GPIO_GPIO1
+#define LART_IRQ_IDE IRQ_GPIO1
+
+#define LART_GPIO_UCB1200 GPIO_GPIO18
+#define LART_IRQ_UCB1200 IRQ_GPIO18
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
new file mode 100644
index 0000000..fb8b09a
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/mcp.h
+ *
+ * Copyright (C) 2005 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_ARCH_MCP_H
+#define __ASM_ARM_ARCH_MCP_H
+
+#include <linux/types.h>
+
+struct mcp_plat_data {
+ u32 mccr0;
+ u32 mccr1;
+ unsigned int sclk_rate;
+};
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
new file mode 100644
index 0000000..29f639e
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/memory.h
+ *
+ * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org>
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset is 0xc0000000 on the SA1100
+ */
+#define PHYS_OFFSET UL(0xc0000000)
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_SA1111
+void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+ sa1111_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_1M - 1)
+
+#endif
+#endif
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ *
+ * On the SA1100, bus addresses are equivalent to physical addresses.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Because of the wide memory address space between physical RAM banks on the
+ * SA1100, it's much convenient to use Linux's NUMA support to implement our
+ * memory map representation. Assuming all memory nodes have equal access
+ * characteristics, we then have generic discontiguous memory support.
+ *
+ * Of course, all this isn't mandatory for SA1100 implementations with only
+ * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM.
+ *
+ * The nodes are matched with the physical memory bank addresses which are
+ * incidentally the same as virtual addresses.
+ *
+ * node 0: 0xc0000000 - 0xc7ffffff
+ * node 1: 0xc8000000 - 0xcfffffff
+ * node 2: 0xd0000000 - 0xd7ffffff
+ * node 3: 0xd8000000 - 0xdfffffff
+ */
+#define NODE_MEM_SIZE_BITS 27
+
+/*
+ * Cache flushing area - SA1100 zero bank
+ */
+#define FLUSH_BASE_PHYS 0xe0000000
+#define FLUSH_BASE 0xf5000000
+#define FLUSH_BASE_MINICACHE 0xf5100000
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
new file mode 100644
index 0000000..80cfdac
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
@@ -0,0 +1,26 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 2, 2004
+ * Copyright: (C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
+ */
+
+#ifndef __ARCH_SA1100_MTD_XIP_H__
+#define __ARCH_SA1100_MTD_XIP_H__
+
+#define xip_irqpending() (ICIP & ICMR)
+
+/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
+#define xip_currtime() (OSCR)
+#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4)
+
+#endif /* __ARCH_SA1100_MTD_XIP_H__ */
diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h
new file mode 100644
index 0000000..d3f044f
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/neponset.h
@@ -0,0 +1,74 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/neponset.h
+ *
+ * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ * Definitions for Neponset added.
+ */
+#ifndef __ASM_ARCH_NEPONSET_H
+#define __ASM_ARCH_NEPONSET_H
+
+/*
+ * Neponset definitions:
+ */
+
+#define NEPONSET_CPLD_BASE (0x10000000)
+#define Nep_p2v( x ) ((x) - NEPONSET_CPLD_BASE + 0xf3000000)
+#define Nep_v2p( x ) ((x) - 0xf3000000 + NEPONSET_CPLD_BASE)
+
+#define _IRR 0x10000024 /* Interrupt Reason Register */
+#define _AUD_CTL 0x100000c0 /* Audio controls (RW) */
+#define _MDM_CTL_0 0x100000b0 /* Modem control 0 (RW) */
+#define _MDM_CTL_1 0x100000b4 /* Modem control 1 (RW) */
+#define _NCR_0 0x100000a0 /* Control Register (RW) */
+#define _KP_X_OUT 0x10000090 /* Keypad row write (RW) */
+#define _KP_Y_IN 0x10000080 /* Keypad column read (RO) */
+#define _SWPK 0x10000020 /* Switch pack (RO) */
+#define _WHOAMI 0x10000000 /* System ID Register (RO) */
+
+#define _LEDS 0x10000010 /* LEDs [31:0] (WO) */
+
+#define IRR (*((volatile u_char *) Nep_p2v(_IRR)))
+#define AUD_CTL (*((volatile u_char *) Nep_p2v(_AUD_CTL)))
+#define MDM_CTL_0 (*((volatile u_char *) Nep_p2v(_MDM_CTL_0)))
+#define MDM_CTL_1 (*((volatile u_char *) Nep_p2v(_MDM_CTL_1)))
+#define NCR_0 (*((volatile u_char *) Nep_p2v(_NCR_0)))
+#define KP_X_OUT (*((volatile u_char *) Nep_p2v(_KP_X_OUT)))
+#define KP_Y_IN (*((volatile u_char *) Nep_p2v(_KP_Y_IN)))
+#define SWPK (*((volatile u_char *) Nep_p2v(_SWPK)))
+#define WHOAMI (*((volatile u_char *) Nep_p2v(_WHOAMI)))
+
+#define LEDS (*((volatile Word *) Nep_p2v(_LEDS)))
+
+#define IRR_ETHERNET (1<<0)
+#define IRR_USAR (1<<1)
+#define IRR_SA1111 (1<<2)
+
+#define AUD_SEL_1341 (1<<0)
+#define AUD_MUTE_1341 (1<<1)
+
+#define MDM_CTL0_RTS1 (1 << 0)
+#define MDM_CTL0_DTR1 (1 << 1)
+#define MDM_CTL0_RTS2 (1 << 2)
+#define MDM_CTL0_DTR2 (1 << 3)
+
+#define MDM_CTL1_CTS1 (1 << 0)
+#define MDM_CTL1_DSR1 (1 << 1)
+#define MDM_CTL1_DCD1 (1 << 2)
+#define MDM_CTL1_CTS2 (1 << 3)
+#define MDM_CTL1_DSR2 (1 << 4)
+#define MDM_CTL1_DCD2 (1 << 5)
+
+#define NCR_GP01_OFF (1<<0)
+#define NCR_TP_PWR_EN (1<<1)
+#define NCR_MS_PWR_EN (1<<2)
+#define NCR_ENET_OSC_EN (1<<3)
+#define NCR_SPI_KB_WK_UP (1<<4)
+#define NCR_A0VPP (1<<5)
+#define NCR_A1VPP (1<<6)
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h
new file mode 100644
index 0000000..ec27d6e
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/shannon.h
@@ -0,0 +1,43 @@
+#ifndef _INCLUDE_SHANNON_H
+#define _INCLUDE_SHANNON_H
+
+/* taken from comp.os.inferno Tue, 12 Sep 2000 09:21:50 GMT,
+ * written by <forsyth@vitanuova.com> */
+
+#define SHANNON_GPIO_SPI_FLASH GPIO_GPIO (0) /* Output - Driven low, enables SPI to flash */
+#define SHANNON_GPIO_SPI_DSP GPIO_GPIO (1) /* Output - Driven low, enables SPI to DSP */
+/* lcd lower = GPIO 2-9 */
+#define SHANNON_GPIO_SPI_OUTPUT GPIO_GPIO (10) /* Output - SPI output to DSP */
+#define SHANNON_GPIO_SPI_INPUT GPIO_GPIO (11) /* Input - SPI input from DSP */
+#define SHANNON_GPIO_SPI_CLOCK GPIO_GPIO (12) /* Output - Clock for SPI */
+#define SHANNON_GPIO_SPI_FRAME GPIO_GPIO (13) /* Output - Frame marker - not used */
+#define SHANNON_GPIO_SPI_RTS GPIO_GPIO (14) /* Input - SPI Ready to Send */
+#define SHANNON_IRQ_GPIO_SPI_RTS IRQ_GPIO14
+#define SHANNON_GPIO_SPI_CTS GPIO_GPIO (15) /* Output - SPI Clear to Send */
+#define SHANNON_GPIO_IRQ_CODEC GPIO_GPIO (16) /* in, irq from ucb1200 */
+#define SHANNON_IRQ_GPIO_IRQ_CODEC IRQ_GPIO16
+#define SHANNON_GPIO_DSP_RESET GPIO_GPIO (17) /* Output - Drive low to reset the DSP */
+#define SHANNON_GPIO_CODEC_RESET GPIO_GPIO (18) /* Output - Drive low to reset the UCB1x00 */
+#define SHANNON_GPIO_U3_RTS GPIO_GPIO (19) /* ?? */
+#define SHANNON_GPIO_U3_CTS GPIO_GPIO (20) /* ?? */
+#define SHANNON_GPIO_SENSE_12V GPIO_GPIO (21) /* Input, 12v flash unprotect detected */
+#define SHANNON_GPIO_DISP_EN GPIO_GPIO (22) /* out */
+/* XXX GPIO 23 unaccounted for */
+#define SHANNON_GPIO_EJECT_0 GPIO_GPIO (24) /* in */
+#define SHANNON_IRQ_GPIO_EJECT_0 IRQ_GPIO24
+#define SHANNON_GPIO_EJECT_1 GPIO_GPIO (25) /* in */
+#define SHANNON_IRQ_GPIO_EJECT_1 IRQ_GPIO25
+#define SHANNON_GPIO_RDY_0 GPIO_GPIO (26) /* in */
+#define SHANNON_IRQ_GPIO_RDY_0 IRQ_GPIO26
+#define SHANNON_GPIO_RDY_1 GPIO_GPIO (27) /* in */
+#define SHANNON_IRQ_GPIO_RDY_1 IRQ_GPIO27
+
+/* MCP UCB codec GPIO pins... */
+
+#define SHANNON_UCB_GPIO_BACKLIGHT 9
+#define SHANNON_UCB_GPIO_BRIGHT_MASK 7
+#define SHANNON_UCB_GPIO_BRIGHT 6
+#define SHANNON_UCB_GPIO_CONTRAST_MASK 0x3f
+#define SHANNON_UCB_GPIO_CONTRAST 0
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/simpad.h b/arch/arm/mach-sa1100/include/mach/simpad.h
new file mode 100644
index 0000000..9296c45
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/simpad.h
@@ -0,0 +1,112 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/simpad.h
+ *
+ * based of assabet.h same as HUW_Webpanel
+ *
+ * This file contains the hardware specific definitions for SIMpad
+ *
+ * 2001/05/14 Juergen Messerer <juergen.messerer@freesurf.ch>
+ */
+
+#ifndef __ASM_ARCH_SIMPAD_H
+#define __ASM_ARCH_SIMPAD_H
+
+
+#define GPIO_UART1_RTS GPIO_GPIO14
+#define GPIO_UART1_DTR GPIO_GPIO7
+#define GPIO_UART1_CTS GPIO_GPIO8
+#define GPIO_UART1_DCD GPIO_GPIO23
+#define GPIO_UART1_DSR GPIO_GPIO6
+
+#define GPIO_UART3_RTS GPIO_GPIO12
+#define GPIO_UART3_DTR GPIO_GPIO16
+#define GPIO_UART3_CTS GPIO_GPIO13
+#define GPIO_UART3_DCD GPIO_GPIO18
+#define GPIO_UART3_DSR GPIO_GPIO17
+
+#define GPIO_POWER_BUTTON GPIO_GPIO0
+#define GPIO_UCB1300_IRQ GPIO_GPIO22 /* UCB GPIO and touchscreen */
+
+#define IRQ_UART1_CTS IRQ_GPIO15
+#define IRQ_UART1_DCD GPIO_GPIO23
+#define IRQ_UART1_DSR GPIO_GPIO6
+#define IRQ_UART3_CTS GPIO_GPIO13
+#define IRQ_UART3_DCD GPIO_GPIO18
+#define IRQ_UART3_DSR GPIO_GPIO17
+
+#define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22
+#define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0
+
+
+/*--- PCMCIA ---*/
+#define GPIO_CF_CD GPIO_GPIO24
+#define GPIO_CF_IRQ GPIO_GPIO1
+#define IRQ_GPIO_CF_IRQ IRQ_GPIO1
+#define IRQ_GPIO_CF_CD IRQ_GPIO24
+
+/*--- SmartCard ---*/
+#define GPIO_SMART_CARD GPIO_GPIO10
+#define IRQ_GPIO_SMARD_CARD IRQ_GPIO10
+
+// CS3 Latch is write only, a shadow is necessary
+
+#define CS3BUSTYPE unsigned volatile long
+#define CS3_BASE 0xf1000000
+
+#define VCC_5V_EN 0x0001 // For 5V PCMCIA
+#define VCC_3V_EN 0x0002 // FOR 3.3V PCMCIA
+#define EN1 0x0004 // This is only for EPROM's
+#define EN0 0x0008 // Both should be enable for 3.3V or 5V
+#define DISPLAY_ON 0x0010
+#define PCMCIA_BUFF_DIS 0x0020
+#define MQ_RESET 0x0040
+#define PCMCIA_RESET 0x0080
+#define DECT_POWER_ON 0x0100
+#define IRDA_SD 0x0200 // Shutdown for powersave
+#define RS232_ON 0x0400
+#define SD_MEDIAQ 0x0800 // Shutdown for powersave
+#define LED2_ON 0x1000
+#define IRDA_MODE 0x2000 // Fast/Slow IrDA mode
+#define ENABLE_5V 0x4000 // Enable 5V circuit
+#define RESET_SIMCARD 0x8000
+
+#define RS232_ENABLE 0x0440
+#define PCMCIAMASK 0x402f
+
+
+struct simpad_battery {
+ unsigned char ac_status; /* line connected yes/no */
+ unsigned char status; /* battery loading yes/no */
+ unsigned char percentage; /* percentage loaded */
+ unsigned short life; /* life till empty */
+};
+
+/* These should match the apm_bios.h definitions */
+#define SIMPAD_AC_STATUS_AC_OFFLINE 0x00
+#define SIMPAD_AC_STATUS_AC_ONLINE 0x01
+#define SIMPAD_AC_STATUS_AC_BACKUP 0x02 /* What does this mean? */
+#define SIMPAD_AC_STATUS_AC_UNKNOWN 0xff
+
+/* These bitfields are rarely "or'd" together */
+#define SIMPAD_BATT_STATUS_HIGH 0x01
+#define SIMPAD_BATT_STATUS_LOW 0x02
+#define SIMPAD_BATT_STATUS_CRITICAL 0x04
+#define SIMPAD_BATT_STATUS_CHARGING 0x08
+#define SIMPAD_BATT_STATUS_CHARGE_MAIN 0x10
+#define SIMPAD_BATT_STATUS_DEAD 0x20 /* Battery will not charge */
+#define SIMPAD_BATT_NOT_INSTALLED 0x20 /* For expansion pack batteries */
+#define SIMPAD_BATT_STATUS_FULL 0x40 /* Battery fully charged (and connected to AC) */
+#define SIMPAD_BATT_STATUS_NOBATT 0x80
+#define SIMPAD_BATT_STATUS_UNKNOWN 0xff
+
+extern int simpad_get_battery(struct simpad_battery* );
+
+#endif // __ASM_ARCH_SIMPAD_H
+
+
+
+
+
+
+
+
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
new file mode 100644
index 0000000..63755ca
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/system.h
+ *
+ * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ */
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ if (mode == 's') {
+ /* Jump into ROM at address 0 */
+ cpu_reset(0);
+ } else {
+ /* Use on-chip reset capability */
+ RSRR = RSRR_SWR;
+ }
+}
diff --git a/arch/arm/mach-sa1100/include/mach/timex.h b/arch/arm/mach-sa1100/include/mach/timex.h
new file mode 100644
index 0000000..7a5d017
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/timex.h
@@ -0,0 +1,12 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/timex.h
+ *
+ * SA1100 architecture timex specifications
+ *
+ * Copyright (C) 1998
+ */
+
+/*
+ * SA1100 timer
+ */
+#define CLOCK_TICK_RATE 3686400
diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h
new file mode 100644
index 0000000..714160b
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/uncompress.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/uncompress.h
+ *
+ * (C) 1999 Nicolas Pitre <nico@cam.org>
+ *
+ * Reorganised to be machine independent.
+ */
+
+#include "hardware.h"
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader. We search for the first enabled
+ * port in the most probable order. If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ */
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+static void putc(int c)
+{
+ unsigned long serial_port;
+
+ do {
+ serial_port = _Ser3UTCR0;
+ if (UART(UTCR3) & UTCR3_TXE) break;
+ serial_port = _Ser1UTCR0;
+ if (UART(UTCR3) & UTCR3_TXE) break;
+ serial_port = _Ser2UTCR0;
+ if (UART(UTCR3) & UTCR3_TXE) break;
+ return;
+ } while (0);
+
+ /* wait for space in the UART's transmitter */
+ while (!(UART(UTSR1) & UTSR1_TNF))
+ barrier();
+
+ /* send the character out. */
+ UART(UTDR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Nothing to do for these
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-sa1100/include/mach/vmalloc.h b/arch/arm/mach-sa1100/include/mach/vmalloc.h
new file mode 100644
index 0000000..ec8fdc5
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/vmalloc.h
+ */
+#define VMALLOC_END (0xe8000000)
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 280e111..86369a8 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -16,7 +16,7 @@
#include <linux/ioport.h>
#include <linux/sysdev.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/irq.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 2fefd19..81848aa 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -23,7 +23,7 @@
#include <linux/mtd/partitions.h>
#include <video/s1d13xxxfb.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index e319c36..06ea7ab 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -20,9 +20,9 @@
#include <linux/sched.h>
#include <linux/slab.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/ssp.h>
-#include <asm/arch/jornada720.h>
+#include <mach/jornada720.h>
static DEFINE_SPINLOCK(jornada_ssp_lock);
static unsigned long jornada_ssp_flags;
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 7b99121..0cd5269 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -6,14 +6,14 @@
#include <linux/kernel.h>
#include <linux/tty.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/leds-assabet.c b/arch/arm/mach-sa1100/leds-assabet.c
index 0af944e..64e9b4b 100644
--- a/arch/arm/mach-sa1100/leds-assabet.c
+++ b/arch/arm/mach-sa1100/leds-assabet.c
@@ -11,10 +11,10 @@
*/
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
-#include <asm/arch/assabet.h>
+#include <mach/assabet.h>
#include "leds.h"
diff --git a/arch/arm/mach-sa1100/leds-badge4.c b/arch/arm/mach-sa1100/leds-badge4.c
index 9aead5f..cf1e384 100644
--- a/arch/arm/mach-sa1100/leds-badge4.c
+++ b/arch/arm/mach-sa1100/leds-badge4.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c
index 0c61ce5..259b48e 100644
--- a/arch/arm/mach-sa1100/leds-cerf.c
+++ b/arch/arm/mach-sa1100/leds-cerf.c
@@ -5,7 +5,7 @@
*/
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
index afa82f4..2bce137 100644
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ b/arch/arm/mach-sa1100/leds-hackkit.c
@@ -11,7 +11,7 @@
*/
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c
index 066c7dc..0505a1f 100644
--- a/arch/arm/mach-sa1100/leds-lart.c
+++ b/arch/arm/mach-sa1100/leds-lart.c
@@ -11,7 +11,7 @@
*/
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-sa1100/leds-simpad.c b/arch/arm/mach-sa1100/leds-simpad.c
index 1a3564b..d50f4ee 100644
--- a/arch/arm/mach-sa1100/leds-simpad.c
+++ b/arch/arm/mach-sa1100/leds-simpad.c
@@ -5,10 +5,10 @@
*/
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
-#include <asm/arch/simpad.h>
+#include <mach/simpad.h>
#include "leds.h"
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index dd7949f..4856a6b 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -10,14 +10,14 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/neponset.h>
+#include <mach/assabet.h>
+#include <mach/neponset.h>
#include <asm/hardware/sa1111.h>
#include <asm/sizes.h>
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 84e956e..83be1c6 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -11,7 +11,7 @@
#include <linux/mtd/partitions.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -20,7 +20,7 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 41ac210..111cce6 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -27,7 +27,7 @@
#include <linux/errno.h>
#include <linux/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/memory.h>
#include <asm/system.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 60b4d84..9ccdd09 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -9,7 +9,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
@@ -17,8 +17,8 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
-#include <asm/arch/shannon.h>
+#include <mach/mcp.h>
+#include <mach/shannon.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index cc1df07..8dd6353 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -14,7 +14,7 @@
#include <linux/mtd/partitions.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -22,8 +22,8 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
-#include <asm/arch/simpad.h>
+#include <mach/mcp.h>
+#include <mach/simpad.h>
#include <linux/serial_core.h>
#include <linux/ioport.h>
diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S
index 29bdd3d..171441f 100644
--- a/arch/arm/mach-sa1100/sleep.S
+++ b/arch/arm/mach-sa1100/sleep.S
@@ -18,7 +18,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c
index db49165..641f361 100644
--- a/arch/arm/mach-sa1100/ssp.c
+++ b/arch/arm/mach-sa1100/ssp.c
@@ -20,7 +20,7 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#include <asm/hardware/ssp.h>
#define TIMEOUT 100000
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 428c212..24c0a4b 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -16,7 +16,7 @@
#include <linux/clockchips.h>
#include <asm/mach/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
#define MIN_OSCR_DELTA 2