iwlwifi: move firmware file format definitions to correct header
The firmware file-format is described in iwl-fw-file.h, while the
internal handling structures and functions are in iwl-fw.h.
Fix the separation between the files by moving file format
definitions to iwl-fw-file.h.
Also add a missing description for a kernel-doc member, and it's
not needed to include iwl-fw-file.h again from the code (thanks
to Liad Kaufman).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/iwlwifi/iwl-fw-file.h
index 401f7be..df5613a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw-file.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw-file.h
@@ -179,4 +179,187 @@
__le32 api_capa;
} __packed;
+/**
+ * enum iwl_ucode_tlv_flag - ucode API flags
+ * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
+ * was a separate TLV but moved here to save space.
+ * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID,
+ * treats good CRC threshold as a boolean
+ * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
+ * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P.
+ * @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS
+ * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD
+ * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
+ * offload profile config command.
+ * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
+ * (rather than two) IPv6 addresses
+ * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
+ * from the probe request template.
+ * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
+ * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
+ * @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC
+ * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and
+ * P2P client interfaces simultaneously if they are in different bindings.
+ * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and
+ * P2P client interfaces simultaneously if they are in same bindings.
+ * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
+ * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
+ * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
+ * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
+ * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS.
+ */
+enum iwl_ucode_tlv_flag {
+ IWL_UCODE_TLV_FLAGS_PAN = BIT(0),
+ IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1),
+ IWL_UCODE_TLV_FLAGS_MFP = BIT(2),
+ IWL_UCODE_TLV_FLAGS_P2P = BIT(3),
+ IWL_UCODE_TLV_FLAGS_DW_BC_TABLE = BIT(4),
+ IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7),
+ IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10),
+ IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12),
+ IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15),
+ IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16),
+ IWL_UCODE_TLV_FLAGS_P2P_PM = BIT(21),
+ IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM = BIT(22),
+ IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM = BIT(23),
+ IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24),
+ IWL_UCODE_TLV_FLAGS_EBS_SUPPORT = BIT(25),
+ IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26),
+ IWL_UCODE_TLV_FLAGS_BCAST_FILTERING = BIT(29),
+ IWL_UCODE_TLV_FLAGS_GO_UAPSD = BIT(30),
+};
+
+/**
+ * enum iwl_ucode_tlv_api - ucode api
+ * @IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID: wowlan config includes tid field.
+ * @IWL_UCODE_TLV_CAPA_EXTENDED_BEACON: Support Extended beacon notification
+ * @IWL_UCODE_TLV_API_BT_COEX_SPLIT: new API for BT Coex
+ * @IWL_UCODE_TLV_API_CSA_FLOW: ucode can do unbind-bind flow for CSA.
+ * @IWL_UCODE_TLV_API_DISABLE_STA_TX: ucode supports tx_disable bit.
+ * @IWL_UCODE_TLV_API_LMAC_SCAN: This ucode uses LMAC unified scan API.
+ * @IWL_UCODE_TLV_API_SF_NO_DUMMY_NOTIF: ucode supports disabling dummy notif.
+ * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
+ * longer than the passive one, which is essential for fragmented scan.
+ */
+enum iwl_ucode_tlv_api {
+ IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID = BIT(0),
+ IWL_UCODE_TLV_CAPA_EXTENDED_BEACON = BIT(1),
+ IWL_UCODE_TLV_API_BT_COEX_SPLIT = BIT(3),
+ IWL_UCODE_TLV_API_CSA_FLOW = BIT(4),
+ IWL_UCODE_TLV_API_DISABLE_STA_TX = BIT(5),
+ IWL_UCODE_TLV_API_LMAC_SCAN = BIT(6),
+ IWL_UCODE_TLV_API_SF_NO_DUMMY_NOTIF = BIT(7),
+ IWL_UCODE_TLV_API_FRAGMENTED_SCAN = BIT(8),
+};
+
+/**
+ * enum iwl_ucode_tlv_capa - ucode capabilities
+ * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
+ * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
+ * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
+ * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
+ * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
+ * tx power value into TPC Report action frame and Link Measurement Report
+ * action frame
+ * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current
+ * channel in DS parameter set element in probe requests.
+ * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in
+ * probe requests.
+ * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
+ * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
+ * which also implies support for the scheduler configuration command
+ * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
+ * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
+ */
+enum iwl_ucode_tlv_capa {
+ IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = BIT(0),
+ IWL_UCODE_TLV_CAPA_LAR_SUPPORT = BIT(1),
+ IWL_UCODE_TLV_CAPA_UMAC_SCAN = BIT(2),
+ IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = BIT(6),
+ IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = BIT(8),
+ IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = BIT(9),
+ IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = BIT(10),
+ IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = BIT(11),
+ IWL_UCODE_TLV_CAPA_DQA_SUPPORT = BIT(12),
+ IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = BIT(13),
+ IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = BIT(18),
+};
+
+/* The default calibrate table size if not specified by firmware file */
+#define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18
+#define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19
+#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253
+
+/* The default max probe length if not specified by the firmware file */
+#define IWL_DEFAULT_MAX_PROBE_LENGTH 200
+
+/*
+ * For 16.0 uCode and above, there is no differentiation between sections,
+ * just an offset to the HW address.
+ */
+#define IWL_UCODE_SECTION_MAX 12
+#define IWL_API_ARRAY_SIZE 1
+#define IWL_CAPABILITIES_ARRAY_SIZE 1
+#define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC
+
+/* uCode version contains 4 values: Major/Minor/API/Serial */
+#define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
+#define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16)
+#define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
+#define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
+
+/*
+ * Calibration control struct.
+ * Sent as part of the phy configuration command.
+ * @flow_trigger: bitmap for which calibrations to perform according to
+ * flow triggers.
+ * @event_trigger: bitmap for which calibrations to perform according to
+ * event triggers.
+ */
+struct iwl_tlv_calib_ctrl {
+ __le32 flow_trigger;
+ __le32 event_trigger;
+} __packed;
+
+enum iwl_fw_phy_cfg {
+ FW_PHY_CFG_RADIO_TYPE_POS = 0,
+ FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS,
+ FW_PHY_CFG_RADIO_STEP_POS = 2,
+ FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS,
+ FW_PHY_CFG_RADIO_DASH_POS = 4,
+ FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS,
+ FW_PHY_CFG_TX_CHAIN_POS = 16,
+ FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS,
+ FW_PHY_CFG_RX_CHAIN_POS = 20,
+ FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS,
+};
+
+#define IWL_UCODE_MAX_CS 1
+
+/**
+ * struct iwl_fw_cipher_scheme - a cipher scheme supported by FW.
+ * @cipher: a cipher suite selector
+ * @flags: cipher scheme flags (currently reserved for a future use)
+ * @hdr_len: a size of MPDU security header
+ * @pn_len: a size of PN
+ * @pn_off: an offset of pn from the beginning of the security header
+ * @key_idx_off: an offset of key index byte in the security header
+ * @key_idx_mask: a bit mask of key_idx bits
+ * @key_idx_shift: bit shift needed to get key_idx
+ * @mic_len: mic length in bytes
+ * @hw_cipher: a HW cipher index used in host commands
+ */
+struct iwl_fw_cipher_scheme {
+ __le32 cipher;
+ u8 flags;
+ u8 hdr_len;
+ u8 pn_len;
+ u8 pn_off;
+ u8 key_idx_off;
+ u8 key_idx_mask;
+ u8 key_idx_shift;
+ u8 mic_len;
+ u8 hw_cipher;
+} __packed;
+
#endif /* __iwl_fw_file_h__ */