Use physical addresses at the interface level, letting drivers remap
them as appropriate.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/dec/ecc-berr.c b/arch/mips/dec/ecc-berr.c
index 8f3498a..cc24c5e 100644
--- a/arch/mips/dec/ecc-berr.c
+++ b/arch/mips/dec/ecc-berr.c
@@ -227,11 +227,11 @@
*/
static inline void dec_kn02_be_init(void)
{
- volatile u32 *csr = (void *)KN02_CSR_BASE;
+ volatile u32 *csr = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR);
unsigned long flags;
- kn0x_erraddr = (void *)(KN02_SLOT_BASE + KN02_ERRADDR);
- kn0x_chksyn = (void *)(KN02_SLOT_BASE + KN02_CHKSYN);
+ kn0x_erraddr = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_ERRADDR);
+ kn0x_chksyn = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CHKSYN);
spin_lock_irqsave(&kn02_lock, flags);
@@ -250,11 +250,11 @@
static inline void dec_kn03_be_init(void)
{
- volatile u32 *mcr = (void *)(KN03_SLOT_BASE + IOASIC_MCR);
- volatile u32 *mbcs = (void *)(KN4K_SLOT_BASE + KN4K_MB_CSR);
+ volatile u32 *mcr = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_MCR);
+ volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR);
- kn0x_erraddr = (void *)(KN03_SLOT_BASE + IOASIC_ERRADDR);
- kn0x_chksyn = (void *)(KN03_SLOT_BASE + IOASIC_CHKSYN);
+ kn0x_erraddr = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_ERRADDR);
+ kn0x_chksyn = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_CHKSYN);
/*
* Set normal ECC detection and generation, enable ECC correction.
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index c89768d..41fa372 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -2,9 +2,9 @@
* arch/mips/dec/int-handler.S
*
* Copyright (C) 1995, 1996, 1997 Paul M. Antoine and Harald Koerfgen
- * Copyright (C) 2000, 2001, 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2002, 2003, 2005 Maciej W. Rozycki
*
- * Written by Ralf Baechle and Andreas Busse, modified for DECStation
+ * Written by Ralf Baechle and Andreas Busse, modified for DECstation
* support by Paul Antoine and Harald Koerfgen.
*
* completly rewritten:
@@ -14,11 +14,12 @@
* by Maciej W. Rozycki.
*/
#include <linux/config.h>
-#include <asm/asm.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/stackframe.h>
+
#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
#include <asm/dec/interrupts.h>
#include <asm/dec/ioasic_addrs.h>
@@ -28,11 +29,14 @@
#include <asm/dec/kn02xa.h>
#include <asm/dec/kn03.h>
+#define KN02_CSR_BASE CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR)
+#define KN02XA_IOASIC_BASE CKSEG1ADDR(KN02XA_SLOT_BASE + IOASIC_IOCTL)
+#define KN03_IOASIC_BASE CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_IOCTL)
.text
.set noreorder
/*
- * decstation_handle_int: Interrupt handler for DECStations
+ * decstation_handle_int: Interrupt handler for DECstations
*
* We follow the model in the Indy interrupt code by David Miller, where he
* says: a lot of complication here is taken away because:
@@ -48,7 +52,7 @@
* 3) Linux only thinks in terms of all IRQs on or all IRQs
* off, nothing in between like BSD spl() brain-damage.
*
- * Furthermore, the IRQs on the DECStations look basically (barring
+ * Furthermore, the IRQs on the DECstations look basically (barring
* software IRQs which we don't use at all) like...
*
* DS2100/3100's, aka kn01, aka Pmax:
@@ -61,7 +65,7 @@
* 3 Lance Ethernet
* 4 DZ11 serial
* 5 RTC
- * 6 Memory Controller
+ * 6 Memory Controller & Video
* 7 FPU
*
* DS5000/200, aka kn02, aka 3max:
diff --git a/arch/mips/dec/kn01-berr.c b/arch/mips/dec/kn01-berr.c
index 8ec7b30..b9271db 100644
--- a/arch/mips/dec/kn01-berr.c
+++ b/arch/mips/dec/kn01-berr.c
@@ -51,7 +51,7 @@
static inline void dec_kn01_be_ack(void)
{
- volatile u16 *csr = (void *)(KN01_SLOT_BASE + KN01_CSR);
+ volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
unsigned long flags;
spin_lock_irqsave(&kn01_lock, flags);
@@ -64,7 +64,8 @@
static int dec_kn01_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
{
- volatile u32 *kn01_erraddr = (void *)(KN01_SLOT_BASE + KN01_ERRADDR);
+ volatile u32 *kn01_erraddr = (void *)CKSEG1ADDR(KN01_SLOT_BASE +
+ KN01_ERRADDR);
static const char excstr[] = "exception";
static const char intstr[] = "interrupt";
@@ -152,7 +153,7 @@
irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id,
struct pt_regs *regs)
{
- volatile u16 *csr = (void *)(KN01_SLOT_BASE + KN01_CSR);
+ volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
int action;
if (!(*csr & KN01_CSR_MEMERR))
@@ -178,7 +179,7 @@
void __init dec_kn01_be_init(void)
{
- volatile u16 *csr = (void *)(KN01_SLOT_BASE + KN01_CSR);
+ volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
unsigned long flags;
spin_lock_irqsave(&kn01_lock, flags);
diff --git a/arch/mips/dec/kn02-irq.c b/arch/mips/dec/kn02-irq.c
index 644085e..898bed5 100644
--- a/arch/mips/dec/kn02-irq.c
+++ b/arch/mips/dec/kn02-irq.c
@@ -37,7 +37,8 @@
static inline void unmask_kn02_irq(unsigned int irq)
{
- volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+ volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+ KN02_CSR);
cached_kn02_csr |= (1 << (irq - kn02_irq_base + 16));
*csr = cached_kn02_csr;
@@ -45,7 +46,8 @@
static inline void mask_kn02_irq(unsigned int irq)
{
- volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+ volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+ KN02_CSR);
cached_kn02_csr &= ~(1 << (irq - kn02_irq_base + 16));
*csr = cached_kn02_csr;
@@ -105,7 +107,8 @@
void __init init_kn02_irqs(int base)
{
- volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+ volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+ KN02_CSR);
unsigned long flags;
int i;
diff --git a/arch/mips/dec/kn02xa-berr.c b/arch/mips/dec/kn02xa-berr.c
index c299095..6cd3f94 100644
--- a/arch/mips/dec/kn02xa-berr.c
+++ b/arch/mips/dec/kn02xa-berr.c
@@ -20,6 +20,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
+#include <asm/addrspace.h>
#include <asm/system.h>
#include <asm/traps.h>
@@ -29,8 +30,8 @@
static inline void dec_kn02xa_be_ack(void)
{
- volatile u32 *mer = (void *)KN02XA_MER;
- volatile u32 *mem_intr = (void *)KN02XA_MEM_INTR;
+ volatile u32 *mer = (void *)CKSEG1ADDR(KN02XA_MER);
+ volatile u32 *mem_intr = (void *)CKSEG1ADDR(KN02XA_MEM_INTR);
*mer = KN02CA_MER_INTR; /* Clear errors; keep the ARC IRQ. */
*mem_intr = 0; /* Any write clears the bus IRQ. */
@@ -40,8 +41,8 @@
static int dec_kn02xa_be_backend(struct pt_regs *regs, int is_fixup,
int invoker)
{
- volatile u32 *kn02xa_mer = (void *)KN02XA_MER;
- volatile u32 *kn02xa_ear = (void *)KN02XA_EAR;
+ volatile u32 *kn02xa_mer = (void *)CKSEG1ADDR(KN02XA_MER);
+ volatile u32 *kn02xa_ear = (void *)CKSEG1ADDR(KN02XA_EAR);
static const char excstr[] = "exception";
static const char intstr[] = "interrupt";
@@ -126,7 +127,7 @@
void __init dec_kn02xa_be_init(void)
{
- volatile u32 *mbcs = (void *)(KN4K_SLOT_BASE + KN4K_MB_CSR);
+ volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR);
/* For KN04 we need to make sure EE (?) is enabled in the MB. */
if (current_cpu_data.cputype == CPU_R4000SC)
diff --git a/arch/mips/dec/prom/identify.c b/arch/mips/dec/prom/identify.c
index 9380588..81d5e87 100644
--- a/arch/mips/dec/prom/identify.c
+++ b/arch/mips/dec/prom/identify.c
@@ -2,7 +2,7 @@
* identify.c: machine identification code.
*
* Copyright (C) 1998 Harald Koerfgen and Paul M. Antoine
- * Copyright (C) 2002, 2003, 2004 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2004, 2005 Maciej W. Rozycki
*/
#include <linux/init.h>
#include <linux/kernel.h>
@@ -12,6 +12,7 @@
#include <linux/types.h>
#include <asm/bootinfo.h>
+
#include <asm/dec/ioasic.h>
#include <asm/dec/ioasic_addrs.h>
#include <asm/dec/kn01.h>
@@ -21,6 +22,7 @@
#include <asm/dec/kn03.h>
#include <asm/dec/kn230.h>
#include <asm/dec/prom.h>
+#include <asm/dec/system.h>
#include "dectypes.h"
@@ -68,34 +70,44 @@
static inline void prom_init_kn01(void)
{
- dec_rtc_base = (void *)KN01_RTC_BASE;
+ dec_kn_slot_base = KN01_SLOT_BASE;
dec_kn_slot_size = KN01_SLOT_SIZE;
+
+ dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN01_RTC);
}
static inline void prom_init_kn230(void)
{
- dec_rtc_base = (void *)KN01_RTC_BASE;
+ dec_kn_slot_base = KN01_SLOT_BASE;
dec_kn_slot_size = KN01_SLOT_SIZE;
+
+ dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN01_RTC);
}
static inline void prom_init_kn02(void)
{
- dec_rtc_base = (void *)KN02_RTC_BASE;
+ dec_kn_slot_base = KN02_SLOT_BASE;
dec_kn_slot_size = KN02_SLOT_SIZE;
+
+ dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN02_RTC);
}
static inline void prom_init_kn02xa(void)
{
- ioasic_base = (void *)KN02XA_IOASIC_BASE;
- dec_rtc_base = (void *)KN02XA_RTC_BASE;
+ dec_kn_slot_base = KN02XA_SLOT_BASE;
dec_kn_slot_size = IOASIC_SLOT_SIZE;
+
+ ioasic_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_IOCTL);
+ dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_TOY);
}
static inline void prom_init_kn03(void)
{
- ioasic_base = (void *)KN03_IOASIC_BASE;
- dec_rtc_base = (void *)KN03_RTC_BASE;
+ dec_kn_slot_base = KN03_SLOT_BASE;
dec_kn_slot_size = IOASIC_SLOT_SIZE;
+
+ ioasic_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_IOCTL);
+ dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_TOY);
}
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index f63fb9c..8861c3b 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -39,6 +39,7 @@
#include <asm/dec/kn02ca.h>
#include <asm/dec/kn03.h>
#include <asm/dec/kn230.h>
+#include <asm/dec/system.h>
extern void dec_machine_restart(char *command);
@@ -48,10 +49,16 @@
extern asmlinkage void decstation_handle_int(void);
+unsigned long dec_kn_slot_base, dec_kn_slot_size;
+
+EXPORT_SYMBOL(dec_kn_slot_base);
+EXPORT_SYMBOL(dec_kn_slot_size);
+
spinlock_t ioasic_ssr_lock;
volatile u32 *ioasic_base;
-unsigned long dec_kn_slot_size;
+
+EXPORT_SYMBOL(ioasic_base);
/*
* IRQ routing and priority tables. Priorites are set as follows:
@@ -78,6 +85,9 @@
int dec_interrupt[DEC_NR_INTS] = {
[0 ... DEC_NR_INTS - 1] = -1
};
+
+EXPORT_SYMBOL(dec_interrupt);
+
int_ptr cpu_mask_nr_tbl[DEC_MAX_CPU_INTS][2] = {
{ { .i = ~0 }, { .p = dec_intr_unimplemented } },
};
@@ -755,7 +765,3 @@
if (dec_interrupt[DEC_IRQ_HALT] >= 0)
setup_irq(dec_interrupt[DEC_IRQ_HALT], &haltirq);
}
-
-EXPORT_SYMBOL(ioasic_base);
-EXPORT_SYMBOL(dec_kn_slot_size);
-EXPORT_SYMBOL(dec_interrupt);