IB/hfi1: Move saving PCI values to a separate function
During PCIe initialization some registers' values from
PCI config space are saved in order to restore them later
(i.e. after reset). Restoring those value is done by a
function called restore_pci_variables, while saving them
is put directly into function hfi1_pcie_ddinit.
Move saving values to a separate function in the image
of restoring functionality.
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Bartlomiej Dudek <bartlomiej.dudek@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
index cc7be22..82447b7 100644
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -221,63 +221,11 @@ int hfi1_pcie_ddinit(struct hfi1_devdata *dd, struct pci_dev *pdev)
}
dd_dev_info(dd, "WC RcvArray: %p for %x\n",
dd->rcvarray_wc, dd->chip_rcv_array_count * 8);
- /*
- * Save BARs and command to rewrite after device reset.
- */
-
- ret = pci_read_config_dword(dd->pcidev, PCI_BASE_ADDRESS_0, &dd->pcibar0);
- if (ret)
- goto read_error;
-
- ret = pci_read_config_dword(dd->pcidev, PCI_BASE_ADDRESS_1, &dd->pcibar1);
- if (ret)
- goto read_error;
-
- ret = pci_read_config_dword(dd->pcidev, PCI_ROM_ADDRESS, &dd->pci_rom);
- if (ret)
- goto read_error;
-
- ret = pci_read_config_word(dd->pcidev, PCI_COMMAND, &dd->pci_command);
- if (ret)
- goto read_error;
-
- ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL,
- &dd->pcie_devctl);
- if (ret)
- goto read_error;
-
- ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL,
- &dd->pcie_lnkctl);
- if (ret)
- goto read_error;
-
- ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL2,
- &dd->pcie_devctl2);
- if (ret)
- goto read_error;
-
- ret = pci_read_config_dword(dd->pcidev, PCI_CFG_MSIX0, &dd->pci_msix0);
- if (ret)
- goto read_error;
-
- ret = pci_read_config_dword(dd->pcidev, PCIE_CFG_SPCIE1,
- &dd->pci_lnkctl3);
- if (ret)
- goto read_error;
-
- ret = pci_read_config_dword(dd->pcidev, PCIE_CFG_TPH2, &dd->pci_tph2);
- if (ret)
- goto read_error;
dd->flags |= HFI1_PRESENT; /* chip.c CSR routines now work */
return 0;
-
-read_error:
- dd_dev_err(dd, "Unable to read from PCI config\n");
- goto bail_error;
nomem:
ret = -ENOMEM;
-bail_error:
hfi1_pcie_ddcleanup(dd);
return ret;
}
@@ -484,6 +432,64 @@ int restore_pci_variables(struct hfi1_devdata *dd)
return ret;
}
+/* Save BARs and command to rewrite after device reset */
+int save_pci_variables(struct hfi1_devdata *dd)
+{
+ int ret = 0;
+
+ ret = pci_read_config_dword(dd->pcidev, PCI_BASE_ADDRESS_0,
+ &dd->pcibar0);
+ if (ret)
+ goto error;
+
+ ret = pci_read_config_dword(dd->pcidev, PCI_BASE_ADDRESS_1,
+ &dd->pcibar1);
+ if (ret)
+ goto error;
+
+ ret = pci_read_config_dword(dd->pcidev, PCI_ROM_ADDRESS, &dd->pci_rom);
+ if (ret)
+ goto error;
+
+ ret = pci_read_config_word(dd->pcidev, PCI_COMMAND, &dd->pci_command);
+ if (ret)
+ goto error;
+
+ ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL,
+ &dd->pcie_devctl);
+ if (ret)
+ goto error;
+
+ ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL,
+ &dd->pcie_lnkctl);
+ if (ret)
+ goto error;
+
+ ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL2,
+ &dd->pcie_devctl2);
+ if (ret)
+ goto error;
+
+ ret = pci_read_config_dword(dd->pcidev, PCI_CFG_MSIX0, &dd->pci_msix0);
+ if (ret)
+ goto error;
+
+ ret = pci_read_config_dword(dd->pcidev, PCIE_CFG_SPCIE1,
+ &dd->pci_lnkctl3);
+ if (ret)
+ goto error;
+
+ ret = pci_read_config_dword(dd->pcidev, PCIE_CFG_TPH2, &dd->pci_tph2);
+ if (ret)
+ goto error;
+
+ return 0;
+
+error:
+ dd_dev_err(dd, "Unable to read from PCI config\n");
+ return ret;
+}
+
/*
* BIOS may not set PCIe bus-utilization parameters for best performance.
* Check and optionally adjust them to maximize our throughput.